This is the start of the stable review cycle for the 4.9.218 release.
There are 102 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.218-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.218-rc1
disconnect3d <[email protected]>
perf map: Fix off by one in strncpy() size argument
Ilie Halip <[email protected]>
arm64: alternative: fix build with clang integrated assembler
Marek Vasut <[email protected]>
net: ks8851-ml: Fix IO operations, again
Greg Kroah-Hartman <[email protected]>
bpf: Explicitly memset the bpf_attr structure
Eric Biggers <[email protected]>
vt: vt_ioctl: fix use-after-free in vt_in_use()
Peter Zijlstra <[email protected]>
locking/atomic, kref: Add kref_read()
Eric Biggers <[email protected]>
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
Eric Biggers <[email protected]>
vt: vt_ioctl: remove unnecessary console allocation checks
Jiri Slaby <[email protected]>
vt: switch vt_dont_switch to bool
Jiri Slaby <[email protected]>
vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines
Jiri Slaby <[email protected]>
vt: selection, introduce vc_is_sel
Johannes Berg <[email protected]>
mac80211: fix authentication with iwlwifi/mvm
Jouni Malinen <[email protected]>
mac80211: Check port authorization in the ieee80211_tx_dequeue() case
Johan Hovold <[email protected]>
media: xirlink_cit: add missing descriptor sanity checks
Johan Hovold <[email protected]>
media: stv06xx: add missing descriptor sanity checks
Johan Hovold <[email protected]>
media: dib0700: fix rc endpoint lookup
Johan Hovold <[email protected]>
media: ov519: add missing endpoint sanity checks
Eric Biggers <[email protected]>
libfs: fix infoleak in simple_attr_read()
Qiujun Huang <[email protected]>
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
Qiujun Huang <[email protected]>
staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb
Larry Finger <[email protected]>
staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table
Johan Hovold <[email protected]>
media: usbtv: fix control-message timeouts
Johan Hovold <[email protected]>
media: flexcop-usb: fix endpoint sanity check
Mans Rullgard <[email protected]>
usb: musb: fix crash with highmen PIO and usbmon
Qiujun Huang <[email protected]>
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
Matthias Reichl <[email protected]>
USB: cdc-acm: restore capability check order
Pawel Dembicki <[email protected]>
USB: serial: option: add Wistron Neweb D19Q1
Pawel Dembicki <[email protected]>
USB: serial: option: add BroadMobi BM806U
Pawel Dembicki <[email protected]>
USB: serial: option: add support for ASKEY WWHC050
Masami Hiramatsu <[email protected]>
tools: Let O= makes handle a relative path with -C option
Dan Carpenter <[email protected]>
Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
Gustavo A. R. Silva <[email protected]>
Input: raydium_i2c_ts - use true and false for boolean values
Torsten Hilbrich <[email protected]>
vti6: Fix memory leak of skb if input policy check fails
Pablo Neira Ayuso <[email protected]>
netfilter: nft_fwd_netdev: validate family and chain type
YueHaibing <[email protected]>
xfrm: policy: Fix doulbe free in xfrm_policy_timer
Xin Long <[email protected]>
xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
Xin Long <[email protected]>
xfrm: fix uctx len check in verify_sec_ctx_len
Nicolas Dichtel <[email protected]>
vti[6]: fix packet tx through bpf_redirect() in XinY cases
Edward Cree <[email protected]>
genirq: Fix reference leaks on irq affinity notifiers
Johannes Berg <[email protected]>
mac80211: mark station unauthorized before key removal
Martin K. Petersen <[email protected]>
scsi: sd: Fix optimal I/O size for devices that change reported values
Dirk Mueller <[email protected]>
scripts/dtc: Remove redundant YYLOC global declaration
Masami Hiramatsu <[email protected]>
perf probe: Do not depend on dwfl_module_addrsym()
Roger Quadros <[email protected]>
ARM: dts: omap5: Add bus_dma_limit for L3 bus
Roger Quadros <[email protected]>
ARM: dts: dra7: Add bus_dma_limit for L3 bus
Chuhong Yuan <[email protected]>
i2c: hix5hd2: add missed clk_disable_unprepare in remove
Dominik Czarnota <[email protected]>
sxgbe: Fix off by one in samsung driver strncpy size arg
Nicolas Cavallari <[email protected]>
mac80211: Do not send mesh HWMP PREQ if HWMP is disabled
Wen Xiong <[email protected]>
scsi: ipr: Fix softlockup when rescanning devices in petitboot
Madalin Bucur <[email protected]>
dt-bindings: net: FMan erratum A050385
Mike Gilbert <[email protected]>
cpupower: avoid multiple definition with gcc -fno-common
Sabrina Dubroca <[email protected]>
net: ipv4: don't let PMTU updates increase route MTU
Sean Christopherson <[email protected]>
KVM: VMX: Do not allow reexecute_instruction() when skipping MMIO instr
Taehee Yoo <[email protected]>
hsr: set .netnsok flag
Taehee Yoo <[email protected]>
hsr: add restart routine into hsr_get_node_list()
Taehee Yoo <[email protected]>
hsr: use rcu_read_lock() in hsr_get_node_{list/status}()
Jisheng Zhang <[email protected]>
net: mvneta: Fix the case where the last poll did not process all rx
Taehee Yoo <[email protected]>
vxlan: check return value of gro_cells_init()
Oliver Hartkopp <[email protected]>
slcan: not call free_netdev before rtnl_unlock in slcan_open
Dan Carpenter <[email protected]>
NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()
Cong Wang <[email protected]>
net_sched: keep alloc_hash updated after hash allocation
Cong Wang <[email protected]>
net_sched: cls_route: remove the right filter from hashtable
Florian Fainelli <[email protected]>
net: dsa: Fix duplicate frames flooded by learning
Willem de Bruijn <[email protected]>
macsec: restrict to ethernet devices
Taehee Yoo <[email protected]>
hsr: fix general protection fault in hsr_addr_is_self()
Lyude Paul <[email protected]>
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"
Johan Hovold <[email protected]>
staging: greybus: loopback_test: fix potential path truncations
Johan Hovold <[email protected]>
staging: greybus: loopback_test: fix potential path truncation
Cristian Marussi <[email protected]>
arm64: smp: fix smp_send_stop() behaviour
Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix pop noise on ALC225
Thomas Gleixner <[email protected]>
futex: Unbreak futex hashing
Peter Zijlstra <[email protected]>
futex: Fix inode life-time issue
Nathan Chancellor <[email protected]>
kbuild: Disable -Wpointer-to-enum-cast
Anthony Mallet <[email protected]>
USB: cdc-acm: fix rounding error in TIOCSSERIAL
Anthony Mallet <[email protected]>
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
Joerg Roedel <[email protected]>
x86/mm: split vmalloc_sync_all()
Vlastimil Babka <[email protected]>
mm, slub: prevent kmalloc_node crashes and memory leaks
Linus Torvalds <[email protected]>
mm: slub: be more careful about the double cmpxchg of freelist
Chunguang Xu <[email protected]>
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
Corentin Labbe <[email protected]>
rtc: max8907: add missing select REGMAP_IRQ
Alexander Shishkin <[email protected]>
intel_th: Fix user-visible error codes
Samuel Thibault <[email protected]>
staging/speakup: fix get_word non-space look-ahead
Michael Straube <[email protected]>
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
Michał Mirosław <[email protected]>
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
Stephan Gerhold <[email protected]>
iio: magnetometer: ak8974: Fix negative raw values in sysfs
Takashi Iwai <[email protected]>
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
Takashi Iwai <[email protected]>
ALSA: pcm: oss: Avoid plugin buffer overflow
Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix running status after receiving sysex
Takashi Iwai <[email protected]>
ALSA: seq: virmidi: Fix running status after receiving sysex
Takashi Iwai <[email protected]>
ALSA: line6: Fix endless MIDI read loop
Scott Chen <[email protected]>
USB: serial: pl2303: add device-id for HP LD381
Ran Wang <[email protected]>
usb: host: xhci-plat: add a shutdown
Daniele Palmas <[email protected]>
USB: serial: option: add ME910G1 ECM composition 0x110b
Hans de Goede <[email protected]>
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
Kai-Heng Feng <[email protected]>
USB: Disable LPM on WD19's Realtek Hub
Daniel Axtens <[email protected]>
altera-stapl: altera_get_note: prevent write beyond end of 'key'
Marek Szyprowski <[email protected]>
drm/exynos: dsi: fix workaround for the legacy clock name
Marek Szyprowski <[email protected]>
drm/exynos: dsi: propagate error value and silence meaningless warning
Thommy Jakobsson <[email protected]>
spi/zynqmp: remove entry that causes a cs glitch
Kishon Vijay Abraham I <[email protected]>
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
Naveen N. Rao <[email protected]>
powerpc: Include .BTF section
Yuji Sasaki <[email protected]>
spi: qup: call spi_qup_pm_resume_runtime before suspending
-------------
Diffstat:
.../devicetree/bindings/powerpc/fsl/fman.txt | 7 ++
Makefile | 4 +-
arch/arm/boot/dts/dra7.dtsi | 3 +
arch/arm/boot/dts/omap5.dtsi | 1 +
arch/arm64/include/asm/alternative.h | 2 +-
arch/arm64/kernel/smp.c | 17 +++-
arch/powerpc/kernel/vmlinux.lds.S | 6 ++
arch/x86/kvm/vmx.c | 4 +-
arch/x86/mm/fault.c | 26 +++++-
drivers/acpi/apei/ghes.c | 2 +-
drivers/gpu/drm/drm_dp_mst_topology.c | 15 +---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 12 +--
drivers/hwtracing/intel_th/msu.c | 6 +-
drivers/i2c/busses/i2c-hix5hd2.c | 1 +
drivers/iio/magnetometer/ak8974.c | 2 +-
drivers/input/touchscreen/raydium_i2c_ts.c | 4 +-
drivers/media/usb/b2c2/flexcop-usb.c | 6 +-
drivers/media/usb/dvb-usb/dib0700_core.c | 4 +-
drivers/media/usb/gspca/ov519.c | 10 +++
drivers/media/usb/gspca/stv06xx/stv06xx.c | 19 ++++-
drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c | 4 +
drivers/media/usb/gspca/xirlink_cit.c | 18 ++++-
drivers/media/usb/usbtv/usbtv-core.c | 2 +-
drivers/misc/altera-stapl/altera.c | 12 +--
drivers/mmc/host/sdhci-of-at91.c | 8 +-
drivers/net/can/slcan.c | 3 +
drivers/net/ethernet/marvell/mvneta.c | 3 +-
drivers/net/ethernet/micrel/ks8851_mll.c | 56 ++++++++++++-
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +-
drivers/net/macsec.c | 3 +
drivers/net/vxlan.c | 11 ++-
drivers/nfc/fdp/fdp.c | 5 +-
drivers/rtc/Kconfig | 1 +
drivers/scsi/ipr.c | 3 +-
drivers/scsi/ipr.h | 1 +
drivers/scsi/sd.c | 4 +-
drivers/spi/spi-qup.c | 11 ++-
drivers/spi/spi-zynqmp-gqspi.c | 3 -
drivers/staging/greybus/tools/loopback_test.c | 17 ++--
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 2 +
drivers/staging/speakup/main.c | 3 +-
drivers/staging/wlan-ng/hfa384x_usb.c | 2 +
drivers/staging/wlan-ng/prism2usb.c | 1 +
drivers/tty/vt/selection.c | 5 ++
drivers/tty/vt/vt.c | 30 ++++++-
drivers/tty/vt/vt_ioctl.c | 80 ++++++++++---------
drivers/usb/class/cdc-acm.c | 20 +++--
drivers/usb/core/quirks.c | 6 ++
drivers/usb/host/xhci-plat.c | 1 +
drivers/usb/musb/musb_host.c | 17 ++--
drivers/usb/serial/io_edgeport.c | 2 +-
drivers/usb/serial/option.c | 8 ++
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
fs/inode.c | 1 +
fs/libfs.c | 8 +-
include/linux/fs.h | 1 +
include/linux/futex.h | 17 ++--
include/linux/kref.h | 5 ++
include/linux/selection.h | 4 +-
include/linux/vmalloc.h | 5 +-
include/linux/vt_kern.h | 2 +-
kernel/bpf/syscall.c | 3 +-
kernel/futex.c | 93 +++++++++++++---------
kernel/irq/manage.c | 11 ++-
kernel/notifier.c | 2 +-
mm/memcontrol.c | 10 ++-
mm/nommu.c | 10 ++-
mm/slub.c | 32 +++++---
mm/vmalloc.c | 11 ++-
net/dsa/tag_brcm.c | 2 +
net/hsr/hsr_framereg.c | 10 +--
net/hsr/hsr_netlink.c | 74 +++++++++--------
net/hsr/hsr_slave.c | 8 +-
net/ipv4/Kconfig | 1 +
net/ipv4/ip_vti.c | 38 +++++++--
net/ipv4/route.c | 7 +-
net/ipv6/ip6_vti.c | 34 ++++++--
net/mac80211/mesh_hwmp.c | 3 +-
net/mac80211/sta_info.c | 6 ++
net/mac80211/tx.c | 20 ++++-
net/netfilter/nft_fwd_netdev.c | 8 ++
net/sched/cls_route.c | 4 +-
net/sched/cls_tcindex.c | 1 +
net/xfrm/xfrm_policy.c | 2 +
net/xfrm/xfrm_user.c | 6 +-
scripts/Makefile.extrawarn | 1 +
scripts/dtc/dtc-lexer.l | 1 -
sound/core/oss/pcm_plugin.c | 12 ++-
sound/core/seq/oss/seq_oss_midi.c | 1 +
sound/core/seq/seq_virmidi.c | 1 +
sound/pci/hda/patch_realtek.c | 2 +
sound/usb/line6/driver.c | 2 +-
sound/usb/line6/midibuf.c | 2 +-
tools/perf/Makefile | 2 +-
tools/perf/util/map.c | 2 +-
tools/perf/util/probe-finder.c | 11 ++-
.../cpupower/utils/idle_monitor/amd_fam14h_idle.c | 2 +-
.../cpupower/utils/idle_monitor/cpuidle_sysfs.c | 2 +-
.../cpupower/utils/idle_monitor/cpupower-monitor.c | 2 +
.../cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +-
tools/scripts/Makefile.include | 4 +-
102 files changed, 682 insertions(+), 303 deletions(-)
From: Roger Quadros <[email protected]>
commit dfa7ea303f56a3a8b1ed3b91ef35af2da67ca4ee upstream.
The L3 interconnect's memory map is from 0x0 to
0xffffffff. Out of this, System memory (SDRAM) can be
accessed from 0x80000000 to 0xffffffff (2GB)
OMAP5 does support 4GB of SDRAM but upper 2GB can only be
accessed by the MPU subsystem.
Add the dma-ranges property to reflect the physical address limit
of the L3 bus.
Cc: [email protected]
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/omap5.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -131,6 +131,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
reg = <0 0x44000000 0 0x2000>,
<0 0x44800000 0 0x3000>,
From: Taehee Yoo <[email protected]>
[ Upstream commit ca19c70f5225771c05bcdcb832b4eb84d7271c5e ]
The hsr_get_node_list() is to send node addresses to the userspace.
If there are so many nodes, it could fail because of buffer size.
In order to avoid this failure, the restart routine is added.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_netlink.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -371,16 +371,14 @@ fail:
*/
static int hsr_get_node_list(struct sk_buff *skb_in, struct genl_info *info)
{
- /* For receiving */
- struct nlattr *na;
+ unsigned char addr[ETH_ALEN];
struct net_device *hsr_dev;
-
- /* For sending */
struct sk_buff *skb_out;
- void *msg_head;
struct hsr_priv *hsr;
- void *pos;
- unsigned char addr[ETH_ALEN];
+ bool restart = false;
+ struct nlattr *na;
+ void *pos = NULL;
+ void *msg_head;
int res;
if (!info)
@@ -398,8 +396,9 @@ static int hsr_get_node_list(struct sk_b
if (!is_hsr_master(hsr_dev))
goto rcu_unlock;
+restart:
/* Send reply */
- skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+ skb_out = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!skb_out) {
res = -ENOMEM;
goto fail;
@@ -413,17 +412,28 @@ static int hsr_get_node_list(struct sk_b
goto nla_put_failure;
}
- res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex);
- if (res < 0)
- goto nla_put_failure;
+ if (!restart) {
+ res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex);
+ if (res < 0)
+ goto nla_put_failure;
+ }
hsr = netdev_priv(hsr_dev);
- pos = hsr_get_next_node(hsr, NULL, addr);
+ if (!pos)
+ pos = hsr_get_next_node(hsr, NULL, addr);
while (pos) {
res = nla_put(skb_out, HSR_A_NODE_ADDR, ETH_ALEN, addr);
- if (res < 0)
+ if (res < 0) {
+ if (res == -EMSGSIZE) {
+ genlmsg_end(skb_out, msg_head);
+ genlmsg_unicast(genl_info_net(info), skb_out,
+ info->snd_portid);
+ restart = true;
+ goto restart;
+ }
goto nla_put_failure;
+ }
pos = hsr_get_next_node(hsr, pos, addr);
}
rcu_read_unlock();
@@ -440,7 +450,7 @@ invalid:
return 0;
nla_put_failure:
- kfree_skb(skb_out);
+ nlmsg_free(skb_out);
/* Fall through */
fail:
From: Taehee Yoo <[email protected]>
[ Upstream commit 09e91dbea0aa32be02d8877bd50490813de56b9a ]
The hsr module has been supporting the list and status command.
(HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS)
These commands send node information to the user-space via generic netlink.
But, in the non-init_net namespace, these commands are not allowed
because .netnsok flag is false.
So, there is no way to get node information in the non-init_net namespace.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/hsr/hsr_netlink.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/hsr/hsr_netlink.c
+++ b/net/hsr/hsr_netlink.c
@@ -137,6 +137,7 @@ static struct genl_family hsr_genl_famil
.name = "HSR",
.version = 1,
.maxattr = HSR_A_MAX,
+ .netnsok = true,
};
static const struct genl_multicast_group hsr_mcgrps[] = {
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 6cad4e269e25dddd7260a53e9d9d90ba3a3cc35a ]
Return statements in functions returning bool should use true or false
instead of an integer value.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index a99fb5cac5a0e..76cdc145c0912 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -466,7 +466,7 @@ static bool raydium_i2c_boot_trigger(struct i2c_client *client)
}
}
- return 0;
+ return false;
}
static bool raydium_i2c_fw_trigger(struct i2c_client *client)
@@ -492,7 +492,7 @@ static bool raydium_i2c_fw_trigger(struct i2c_client *client)
}
}
- return 0;
+ return false;
}
static int raydium_i2c_check_path(struct i2c_client *client)
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 32cf3a610c35cb21e3157f4bbf29d89960e30a36 ]
These functions are supposed to return negative error codes but instead
it returns true on failure and false on success. The error codes are
eventually propagated back to user space.
Fixes: 48a2b783483b ("Input: add Raydium I2C touchscreen driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/raydium_i2c_ts.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index 76cdc145c0912..1f5b6b5b1018a 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -441,7 +441,7 @@ static int raydium_i2c_write_object(struct i2c_client *client,
return 0;
}
-static bool raydium_i2c_boot_trigger(struct i2c_client *client)
+static int raydium_i2c_boot_trigger(struct i2c_client *client)
{
static const u8 cmd[7][6] = {
{ 0x08, 0x0C, 0x09, 0x00, 0x50, 0xD7 },
@@ -466,10 +466,10 @@ static bool raydium_i2c_boot_trigger(struct i2c_client *client)
}
}
- return false;
+ return 0;
}
-static bool raydium_i2c_fw_trigger(struct i2c_client *client)
+static int raydium_i2c_fw_trigger(struct i2c_client *client)
{
static const u8 cmd[5][11] = {
{ 0, 0x09, 0x71, 0x0C, 0x09, 0x00, 0x50, 0xD7, 0, 0, 0 },
@@ -492,7 +492,7 @@ static bool raydium_i2c_fw_trigger(struct i2c_client *client)
}
}
- return false;
+ return 0;
}
static int raydium_i2c_check_path(struct i2c_client *client)
--
2.20.1
From: Masami Hiramatsu <[email protected]>
[ Upstream commit be40920fbf1003c38ccdc02b571e01a75d890c82 ]
When I tried to compile tools/perf from the top directory with the -C
option, the O= option didn't work correctly if I passed a relative path:
$ make O=BUILD -C tools/perf/
make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop.
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf'
The O= directory existence check failed because the check script ran in
the build target directory instead of the directory where I ran the make
command.
To fix that, once change directory to $(PWD) and check O= directory,
since the PWD is set to where the make command runs.
Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths")
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/Makefile | 2 +-
tools/scripts/Makefile.include | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index cd86fd7b35c48..ebcc0868b99ea 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -34,7 +34,7 @@ endif
# Only pass canonical directory names as the output directory:
#
ifneq ($(O),)
- FULL_O := $(shell readlink -f $(O) || echo $(O))
+ FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O))
endif
#
diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include
index 7ea4438b801dd..882c18201c7c3 100644
--- a/tools/scripts/Makefile.include
+++ b/tools/scripts/Makefile.include
@@ -1,7 +1,7 @@
ifneq ($(O),)
ifeq ($(origin O), command line)
- dummy := $(if $(shell test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
- ABSOLUTE_O := $(shell cd $(O) ; pwd)
+ dummy := $(if $(shell cd $(PWD); test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
+ ABSOLUTE_O := $(shell cd $(PWD); cd $(O) ; pwd)
OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
COMMAND_O := O=$(ABSOLUTE_O)
ifeq ($(objtree),)
--
2.20.1
From: Pawel Dembicki <[email protected]>
commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream.
This modem is embedded on dlink dwr-960 router.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=d191 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution
Signed-off-by: Pawel Dembicki <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1983,6 +1983,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
+ { USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff), /* Wistron Neweb D19Q1 */
+ .driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */
.driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
From: Willem de Bruijn <[email protected]>
[ Upstream commit b06d072ccc4b1acd0147b17914b7ad1caa1818bb ]
Only attach macsec to ethernet devices.
Syzbot was able to trigger a KMSAN warning in macsec_handle_frame
by attaching to a phonet device.
Macvlan has a similar check in macvlan_port_create.
v1->v2
- fix commit message typo
Reported-by: syzbot <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macsec.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -19,6 +19,7 @@
#include <net/genetlink.h>
#include <net/sock.h>
#include <net/gro_cells.h>
+#include <linux/if_arp.h>
#include <uapi/linux/if_macsec.h>
@@ -3219,6 +3220,8 @@ static int macsec_newlink(struct net *ne
real_dev = __dev_get_by_index(net, nla_get_u32(tb[IFLA_LINK]));
if (!real_dev)
return -ENODEV;
+ if (real_dev->type != ARPHRD_ETHER)
+ return -EINVAL;
dev->priv_flags |= IFF_MACSEC;
From: Florian Fainelli <[email protected]>
[ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]
When both the switch and the bridge are learning about new addresses,
switch ports attached to the bridge would see duplicate ARP frames
because both entities would attempt to send them.
Fixes: 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
Reported-by: Maxime Bizon <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dsa/tag_brcm.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/dsa/tag_brcm.c
+++ b/net/dsa/tag_brcm.c
@@ -84,6 +84,8 @@ static struct sk_buff *brcm_tag_xmit(str
brcm_tag[2] = BRCM_IG_DSTMAP2_MASK;
brcm_tag[3] = (1 << p->port) & BRCM_IG_DSTMAP1_MASK;
+ skb->offload_fwd_mark = 1;
+
return skb;
out_free:
From: Matthias Reichl <[email protected]>
commit 62d65bdd9d05158aa2547f8ef72375535f3bc6e3 upstream.
commit b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
introduced a regression by changing the order of capability and close
settings change checks. When running with CAP_SYS_ADMIN setting the
close settings to the values already set resulted in -EOPNOTSUPP.
Fix this by changing the check order back to how it was before.
Fixes: b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
Cc: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Cc: Oliver Neukum <[email protected]>
Signed-off-by: Matthias Reichl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -863,16 +863,16 @@ static int set_serial_info(struct acm *a
mutex_lock(&acm->port.mutex);
- if ((new_serial.close_delay != old_close_delay) ||
- (new_serial.closing_wait != old_closing_wait)) {
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.close_delay != old_close_delay) ||
+ (new_serial.closing_wait != old_closing_wait))
retval = -EPERM;
- else {
- acm->port.close_delay = close_delay;
- acm->port.closing_wait = closing_wait;
- }
- } else
- retval = -EOPNOTSUPP;
+ else
+ retval = -EOPNOTSUPP;
+ } else {
+ acm->port.close_delay = close_delay;
+ acm->port.closing_wait = closing_wait;
+ }
mutex_unlock(&acm->port.mutex);
return retval;
From: Qiujun Huang <[email protected]>
commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream.
Fix slab-out-of-bounds read in the interrupt-URB completion handler.
The boundary condition should be (length - 1) as we access
data[position + 1].
Reported-and-tested-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/io_edgeport.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -634,7 +634,7 @@ static void edge_interrupt_callback(stru
/* grab the txcredits for the ports if available */
position = 2;
portNumber = 0;
- while ((position < length) &&
+ while ((position < length - 1) &&
(portNumber < edge_serial->serial->num_ports)) {
txCredits = data[position] | (data[position+1] << 8);
if (txCredits) {
From: Mans Rullgard <[email protected]>
commit 52974d94a206ce428d9d9b6eaa208238024be82a upstream.
When handling a PIO bulk transfer with highmem buffer, a temporary
mapping is assigned to urb->transfer_buffer. After the transfer is
complete, an invalid address is left behind in this pointer. This is
not ordinarily a problem since nothing touches that buffer before the
urb is released. However, when usbmon is active, usbmon_urb_complete()
calls (indirectly) mon_bin_get_data() which does access the transfer
buffer if it is set. To prevent an invalid memory access here, reset
urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not
set it at all (musb_host_tx()).
Fixes: 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode")
Signed-off-by: Mans Rullgard <[email protected]>
Cc: [email protected]
Signed-off-by: Bin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/musb_host.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1494,10 +1494,7 @@ done:
* We need to map sg if the transfer_buffer is
* NULL.
*/
- if (!urb->transfer_buffer)
- qh->use_sg = true;
-
- if (qh->use_sg) {
+ if (!urb->transfer_buffer) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
@@ -1505,9 +1502,8 @@ done:
status = -EINVAL;
goto done;
}
- urb->transfer_buffer = qh->sg_miter.addr;
length = min_t(u32, length, qh->sg_miter.length);
- musb_write_fifo(hw_ep, length, urb->transfer_buffer);
+ musb_write_fifo(hw_ep, length, qh->sg_miter.addr);
qh->sg_miter.consumed = length;
sg_miter_stop(&qh->sg_miter);
} else {
@@ -1516,11 +1512,6 @@ done:
qh->segsize = length;
- if (qh->use_sg) {
- if (offset + length >= urb->transfer_buffer_length)
- qh->use_sg = false;
- }
-
musb_ep_select(mbase, epnum);
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
@@ -2040,8 +2031,10 @@ finish:
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
- if (qh->use_sg)
+ if (qh->use_sg) {
qh->use_sg = false;
+ urb->transfer_buffer = NULL;
+ }
if (urb->status == -EINPROGRESS)
urb->status = status;
From: Dan Carpenter <[email protected]>
[ Upstream commit 0dcdf9f64028ec3b75db6b691560f8286f3898bf ]
The nci_conn_max_data_pkt_payload_size() function sometimes returns
-EPROTO so "max_size" needs to be signed for the error handling to
work. We can make "payload_size" an int as well.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/fdp/fdp.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/nfc/fdp/fdp.c
+++ b/drivers/nfc/fdp/fdp.c
@@ -192,7 +192,7 @@ static int fdp_nci_send_patch(struct nci
const struct firmware *fw;
struct sk_buff *skb;
unsigned long len;
- u8 max_size, payload_size;
+ int max_size, payload_size;
int rc = 0;
if ((type == NCI_PATCH_TYPE_OTP && !info->otp_patch) ||
@@ -215,8 +215,7 @@ static int fdp_nci_send_patch(struct nci
while (len) {
- payload_size = min_t(unsigned long, (unsigned long) max_size,
- len);
+ payload_size = min_t(unsigned long, max_size, len);
skb = nci_skb_alloc(ndev, (NCI_CTRL_HDR_SIZE + payload_size),
GFP_KERNEL);
From: Jisheng Zhang <[email protected]>
[ Upstream commit 065fd83e1be2e1ba0d446a257fd86a3cc7bddb51 ]
For the case where the last mvneta_poll did not process all
RX packets, we need to xor the pp->cause_rx_tx or port->cause_rx_tx
before claculating the rx_queue.
Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU")
Signed-off-by: Jisheng Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/mvneta.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2690,10 +2690,9 @@ static int mvneta_poll(struct napi_struc
/* For the case where the last mvneta_poll did not process all
* RX packets
*/
- rx_queue = fls(((cause_rx_tx >> 8) & 0xff));
-
cause_rx_tx |= port->cause_rx_tx;
+ rx_queue = fls(((cause_rx_tx >> 8) & 0xff));
if (rx_queue) {
rx_queue = rx_queue - 1;
if (pp->bm_priv)
From: Xin Long <[email protected]>
commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream.
It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) +
uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt),
in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str
later.
This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).
Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_user.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -109,7 +109,8 @@ static inline int verify_sec_ctx_len(str
return 0;
uctx = nla_data(rt);
- if (uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len))
+ if (uctx->len > nla_len(rt) ||
+ uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len))
return -EINVAL;
return 0;
From: Johan Hovold <[email protected]>
commit 536f561d871c5781bc33d26d415685211b94032e upstream.
The driver was issuing synchronous uninterruptible control requests
without using a timeout. This could lead to the driver hanging on
various user requests due to a malfunctioning (or malicious) device
until the device is physically disconnected.
The USB upper limit of five seconds per request should be more than
enough.
Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes: c53a846c48f2 ("[media] usbtv: add video controls")
Cc: stable <[email protected]> # 3.11
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Lubomir Rintel <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/usbtv/usbtv-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/usb/usbtv/usbtv-core.c
+++ b/drivers/media/usb/usbtv/usbtv-core.c
@@ -56,7 +56,7 @@ int usbtv_set_regs(struct usbtv *usbtv,
ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, index, NULL, 0, 0);
+ value, index, NULL, 0, USB_CTRL_GET_TIMEOUT);
if (ret < 0)
return ret;
}
From: Jouni Malinen <[email protected]>
commit ce2e1ca703071723ca2dd94d492a5ab6d15050da upstream.
mac80211 used to check port authorization in the Data frame enqueue case
when going through start_xmit(). However, that authorization status may
change while the frame is waiting in a queue. Add a similar check in the
dequeue case to avoid sending previously accepted frames after
authorization change. This provides additional protection against
potential leaking of frames after a station has been disconnected and
the keys for it are being removed.
Cc: [email protected]
Signed-off-by: Jouni Malinen <[email protected]>
Link: https://lore.kernel.org/r/20200326155133.ced84317ea29.I34d4c47cd8cc8a4042b38a76f16a601fbcbfd9b3@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/tx.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3412,8 +3412,25 @@ begin:
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
- if (txq->sta)
+ if (txq->sta) {
tx.sta = container_of(txq->sta, struct sta_info, sta);
+ /*
+ * Drop unicast frames to unauthorised stations unless they are
+ * EAPOL frames from the local station.
+ */
+ if (unlikely(!ieee80211_vif_is_mesh(&tx.sdata->vif) &&
+ tx.sdata->vif.type != NL80211_IFTYPE_OCB &&
+ !is_multicast_ether_addr(hdr->addr1) &&
+ !test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) &&
+ (!(info->control.flags &
+ IEEE80211_TX_CTRL_PORT_CTRL_PROTO) ||
+ !ether_addr_equal(tx.sdata->vif.addr,
+ hdr->addr2)))) {
+ I802_DEBUG_INC(local->tx_handlers_drop_unauth_port);
+ ieee80211_free_txskb(&local->hw, skb);
+ goto begin;
+ }
+ }
/*
* The key can be removed while the packet was queued, so need to call
From: Pablo Neira Ayuso <[email protected]>
commit 76a109fac206e158eb3c967af98c178cff738e6a upstream.
Make sure the forward action is only used from ingress.
Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nft_fwd_netdev.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/net/netfilter/nft_fwd_netdev.c
+++ b/net/netfilter/nft_fwd_netdev.c
@@ -62,6 +62,13 @@ nla_put_failure:
return -1;
}
+static int nft_fwd_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_hooks(ctx->chain, (1 << NF_NETDEV_INGRESS));
+}
+
static struct nft_expr_type nft_fwd_netdev_type;
static const struct nft_expr_ops nft_fwd_netdev_ops = {
.type = &nft_fwd_netdev_type,
@@ -69,6 +76,7 @@ static const struct nft_expr_ops nft_fwd
.eval = nft_fwd_netdev_eval,
.init = nft_fwd_netdev_init,
.dump = nft_fwd_netdev_dump,
+ .validate = nft_fwd_validate,
};
static struct nft_expr_type nft_fwd_netdev_type __read_mostly = {
From: Torsten Hilbrich <[email protected]>
commit 2a9de3af21aa8c31cd68b0b39330d69f8c1e59df upstream.
The vti6_rcv function performs some tests on the retrieved tunnel
including checking the IP protocol, the XFRM input policy, the
source and destination address.
In all but one places the skb is released in the error case. When
the input policy check fails the network packet is leaked.
Using the same goto-label discard in this case to fix this problem.
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Torsten Hilbrich <[email protected]>
Reviewed-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_vti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -315,7 +315,7 @@ static int vti6_rcv(struct sk_buff *skb)
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
rcu_read_unlock();
- return 0;
+ goto discard;
}
ipv6h = ipv6_hdr(skb);
From: Johannes Berg <[email protected]>
commit be8c827f50a0bcd56361b31ada11dc0a3c2fd240 upstream.
The original patch didn't copy the ieee80211_is_data() condition
because on most drivers the management frames don't go through
this path. However, they do on iwlwifi/mvm, so we do need to keep
the condition here.
Cc: [email protected]
Fixes: ce2e1ca70307 ("mac80211: Check port authorization in the ieee80211_tx_dequeue() case")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Woody Suwalski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/tx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3418,7 +3418,8 @@ begin:
* Drop unicast frames to unauthorised stations unless they are
* EAPOL frames from the local station.
*/
- if (unlikely(!ieee80211_vif_is_mesh(&tx.sdata->vif) &&
+ if (unlikely(ieee80211_is_data(hdr->frame_control) &&
+ !ieee80211_vif_is_mesh(&tx.sdata->vif) &&
tx.sdata->vif.type != NL80211_IFTYPE_OCB &&
!is_multicast_ether_addr(hdr->addr1) &&
!test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) &&
From: Jiri Slaby <[email protected]>
commit e587e8f17433ddb26954f0edf5b2f95c42155ae9 upstream.
These two were macros. Switch them to static inlines, so that it's more
understandable what they are doing.
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 29 ++++++++++++++++++++++-------
1 file changed, 22 insertions(+), 7 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -39,10 +39,25 @@
#include <linux/selection.h>
char vt_dont_switch;
-extern struct tty_driver *console_driver;
-#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_is_sel(vc_cons[i].d))
+static inline bool vt_in_use(unsigned int i)
+{
+ extern struct tty_driver *console_driver;
+
+ return console_driver->ttys[i] && console_driver->ttys[i]->count;
+}
+
+static inline bool vt_busy(int i)
+{
+ if (vt_in_use(i))
+ return true;
+ if (i == fg_console)
+ return true;
+ if (vc_is_sel(vc_cons[i].d))
+ return true;
+
+ return false;
+}
/*
* Console (vt and kd) routines, as defined by USL SVR4 manual, and by
@@ -292,7 +307,7 @@ static int vt_disallocate(unsigned int v
int ret = 0;
console_lock();
- if (VT_BUSY(vc_num))
+ if (vt_busy(vc_num))
ret = -EBUSY;
else if (vc_num)
vc = vc_deallocate(vc_num);
@@ -314,7 +329,7 @@ static void vt_disallocate_all(void)
console_lock();
for (i = 1; i < MAX_NR_CONSOLES; i++)
- if (!VT_BUSY(i))
+ if (!vt_busy(i))
vc[i] = vc_deallocate(i);
else
vc[i] = NULL;
@@ -651,7 +666,7 @@ int vt_ioctl(struct tty_struct *tty,
state = 1; /* /dev/tty0 is always open */
for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
++i, mask <<= 1)
- if (VT_IS_IN_USE(i))
+ if (vt_in_use(i))
state |= mask;
ret = put_user(state, &vtstat->v_state);
}
@@ -664,7 +679,7 @@ int vt_ioctl(struct tty_struct *tty,
case VT_OPENQRY:
/* FIXME: locking ? - but then this is a stupid API */
for (i = 0; i < MAX_NR_CONSOLES; ++i)
- if (! VT_IS_IN_USE(i))
+ if (!vt_in_use(i))
break;
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
goto setint;
From: Oliver Hartkopp <[email protected]>
[ Upstream commit 2091a3d42b4f339eaeed11228e0cbe9d4f92f558 ]
As the description before netdev_run_todo, we cannot call free_netdev
before rtnl_unlock, fix it by reorder the code.
This patch is a 1:1 copy of upstream slip.c commit f596c87005f7
("slip: not call free_netdev before rtnl_unlock in slip_open").
Reported-by: yangerkun <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/slcan.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -621,7 +621,10 @@ err_free_chan:
tty->disc_data = NULL;
clear_bit(SLF_INUSE, &sl->flags);
slc_free_netdev(sl->dev);
+ /* do not call free_netdev before rtnl_unlock */
+ rtnl_unlock();
free_netdev(sl->dev);
+ return err;
err_exit:
rtnl_unlock();
From: Eric Biggers <[email protected]>
commit ca4463bf8438b403596edd0ec961ca0d4fbe0220 upstream.
The VT_DISALLOCATE ioctl can free a virtual console while tty_release()
is still running, causing a use-after-free in con_shutdown(). This
occurs because VT_DISALLOCATE considers a virtual console's
'struct vc_data' to be unused as soon as the corresponding tty's
refcount hits 0. But actually it may be still being closed.
Fix this by making vc_data be reference-counted via the embedded
'struct tty_port'. A newly allocated virtual console has refcount 1.
Opening it for the first time increments the refcount to 2. Closing it
for the last time decrements the refcount (in tty_operations::cleanup()
so that it happens late enough), as does VT_DISALLOCATE.
Reproducer:
#include <fcntl.h>
#include <linux/vt.h>
#include <sys/ioctl.h>
#include <unistd.h>
int main()
{
if (fork()) {
for (;;)
close(open("/dev/tty5", O_RDWR));
} else {
int fd = open("/dev/tty10", O_RDWR);
for (;;)
ioctl(fd, VT_DISALLOCATE, 5);
}
}
KASAN report:
BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129
CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
Call Trace:
[...]
con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514
tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629
tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789
[...]
Allocated by task 129:
[...]
kzalloc include/linux/slab.h:669 [inline]
vc_allocate drivers/tty/vt/vt.c:1085 [inline]
vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066
con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229
tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline]
tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341
tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
[...]
Freed by task 130:
[...]
kfree+0xbf/0x1e0 mm/slab.c:3757
vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline]
vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818
tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
[...]
Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <[email protected]> # v3.4+
Reported-by: [email protected]
Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 23 ++++++++++++++++++++++-
drivers/tty/vt/vt_ioctl.c | 12 ++++--------
2 files changed, 26 insertions(+), 9 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -754,6 +754,17 @@ static void visual_init(struct vc_data *
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
}
+static void vc_port_destruct(struct tty_port *port)
+{
+ struct vc_data *vc = container_of(port, struct vc_data, port);
+
+ kfree(vc);
+}
+
+static const struct tty_port_operations vc_port_ops = {
+ .destruct = vc_port_destruct,
+};
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
@@ -779,6 +790,7 @@ int vc_allocate(unsigned int currcons) /
vc_cons[currcons].d = vc;
tty_port_init(&vc->port);
+ vc->port.ops = &vc_port_ops;
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
visual_init(vc, currcons, 1);
@@ -2897,6 +2909,7 @@ static int con_install(struct tty_driver
tty->driver_data = vc;
vc->port.tty = tty;
+ tty_port_get(&vc->port);
if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
@@ -2932,6 +2945,13 @@ static void con_shutdown(struct tty_stru
console_unlock();
}
+static void con_cleanup(struct tty_struct *tty)
+{
+ struct vc_data *vc = tty->driver_data;
+
+ tty_port_put(&vc->port);
+}
+
static int default_color = 7; /* white */
static int default_italic_color = 2; // green (ASCII)
static int default_underline_color = 3; // cyan (ASCII)
@@ -3056,7 +3076,8 @@ static const struct tty_operations con_o
.throttle = con_throttle,
.unthrottle = con_unthrottle,
.resize = vt_resize,
- .shutdown = con_shutdown
+ .shutdown = con_shutdown,
+ .cleanup = con_cleanup,
};
static struct cdev vc0_cdev;
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -313,10 +313,8 @@ static int vt_disallocate(unsigned int v
vc = vc_deallocate(vc_num);
console_unlock();
- if (vc && vc_num >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc->port);
- kfree(vc);
- }
+ if (vc && vc_num >= MIN_NR_CONSOLES)
+ tty_port_put(&vc->port);
return ret;
}
@@ -336,10 +334,8 @@ static void vt_disallocate_all(void)
console_unlock();
for (i = 1; i < MAX_NR_CONSOLES; i++) {
- if (vc[i] && i >= MIN_NR_CONSOLES) {
- tty_port_destroy(&vc[i]->port);
- kfree(vc[i]);
- }
+ if (vc[i] && i >= MIN_NR_CONSOLES)
+ tty_port_put(&vc[i]->port);
}
}
From: Cong Wang <[email protected]>
[ Upstream commit ef299cc3fa1a9e1288665a9fdc8bff55629fd359 ]
route4_change() allocates a new filter and copies values from
the old one. After the new filter is inserted into the hash
table, the old filter should be removed and freed, as the final
step of the update.
However, the current code mistakenly removes the new one. This
looks apparently wrong to me, and it causes double "free" and
use-after-free too, as reported by syzbot.
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Fixes: 1109c00547fc ("net: sched: RCU cls_route")
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: John Fastabend <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_route.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -542,8 +542,8 @@ static int route4_change(struct net *net
fp = &b->ht[h];
for (pfp = rtnl_dereference(*fp); pfp;
fp = &pfp->next, pfp = rtnl_dereference(*fp)) {
- if (pfp == f) {
- *fp = f->next;
+ if (pfp == fold) {
+ rcu_assign_pointer(*fp, fold->next);
break;
}
}
From: Peter Zijlstra <[email protected]>
commit 2c935bc57221cc2edc787c72ea0e2d30cdcd3d5e upstream.
Since we need to change the implementation, stop exposing internals.
Provide kref_read() to read the current reference count; typically
used for debug messages.
Kills two anti-patterns:
atomic_read(&kref->refcount)
kref->refcount.counter
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
[only add kref_read() to kref.h for stable backports - gregkh]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kref.h | 5 +++++
1 file changed, 5 insertions(+)
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -33,6 +33,11 @@ static inline void kref_init(struct kref
atomic_set(&kref->refcount, 1);
}
+static inline int kref_read(const struct kref *kref)
+{
+ return atomic_read(&kref->refcount);
+}
+
/**
* kref_get - increment refcount for object.
* @kref: object.
From: Cong Wang <[email protected]>
[ Upstream commit 0d1c3530e1bd38382edef72591b78e877e0edcd3 ]
In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex")
I moved cp->hash calculation before the first
tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched.
This difference could lead to another out of bound access.
cp->alloc_hash should always be the size allocated, we should
update it after this tcindex_alloc_perfect_hash().
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Fixes: 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex")
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_tcindex.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -325,6 +325,7 @@ tcindex_set_parms(struct net *net, struc
if (tcindex_alloc_perfect_hash(cp) < 0)
goto errout;
+ cp->alloc_hash = cp->hash;
for (i = 0; i < min(cp->hash, p->hash); i++)
cp->perfect[i].res = p->perfect[i].res;
balloc = 1;
From: Marek Vasut <[email protected]>
commit 8262e6f9b1034ede34548a04dec4c302d92c9497 upstream.
This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it
turns out these were only necessary due to buggy hardware. This patch adds
a check for such a buggy hardware to prevent any such mistakes again.
While working further on the KS8851 driver, it came to light that the
KS8851-16MLL is capable of switching bus endianness by a hardware strap,
EESK pin. If this strap is incorrect, the IO accesses require such endian
swapping as is being reverted by this patch. Such swapping also impacts
the performance significantly.
Hence, in addition to removing it, detect that the hardware is broken,
report to user, and fail to bind with such hardware.
Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access")
Signed-off-by: Marek Vasut <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Lukas Wunner <[email protected]>
Cc: Petr Stetiar <[email protected]>
Cc: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/micrel/ks8851_mll.c | 56 ++++++++++++++++++++++++++++---
1 file changed, 52 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -475,6 +475,50 @@ static int msg_enable;
*/
/**
+ * ks_check_endian - Check whether endianness of the bus is correct
+ * @ks : The chip information
+ *
+ * The KS8851-16MLL EESK pin allows selecting the endianness of the 16bit
+ * bus. To maintain optimum performance, the bus endianness should be set
+ * such that it matches the endianness of the CPU.
+ */
+
+static int ks_check_endian(struct ks_net *ks)
+{
+ u16 cider;
+
+ /*
+ * Read CIDER register first, however read it the "wrong" way around.
+ * If the endian strap on the KS8851-16MLL in incorrect and the chip
+ * is operating in different endianness than the CPU, then the meaning
+ * of BE[3:0] byte-enable bits is also swapped such that:
+ * BE[3,2,1,0] becomes BE[1,0,3,2]
+ *
+ * Luckily for us, the byte-enable bits are the top four MSbits of
+ * the address register and the CIDER register is at offset 0xc0.
+ * Hence, by reading address 0xc0c0, which is not impacted by endian
+ * swapping, we assert either BE[3:2] or BE[1:0] while reading the
+ * CIDER register.
+ *
+ * If the bus configuration is correct, reading 0xc0c0 asserts
+ * BE[3:2] and this read returns 0x0000, because to read register
+ * with bottom two LSbits of address set to 0, BE[1:0] must be
+ * asserted.
+ *
+ * If the bus configuration is NOT correct, reading 0xc0c0 asserts
+ * BE[1:0] and this read returns non-zero 0x8872 value.
+ */
+ iowrite16(BE3 | BE2 | KS_CIDER, ks->hw_addr_cmd);
+ cider = ioread16(ks->hw_addr);
+ if (!cider)
+ return 0;
+
+ netdev_err(ks->netdev, "incorrect EESK endian strap setting\n");
+
+ return -EINVAL;
+}
+
+/**
* ks_rdreg16 - read 16 bit register from device
* @ks : The chip information
* @offset: The register address
@@ -484,7 +528,7 @@ static int msg_enable;
static u16 ks_rdreg16(struct ks_net *ks, int offset)
{
- ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
return ioread16(ks->hw_addr);
}
@@ -499,7 +543,7 @@ static u16 ks_rdreg16(struct ks_net *ks,
static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
{
- ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
iowrite16(value, ks->hw_addr);
}
@@ -515,7 +559,7 @@ static inline void ks_inblk(struct ks_ne
{
len >>= 1;
while (len--)
- *wptr++ = be16_to_cpu(ioread16(ks->hw_addr));
+ *wptr++ = (u16)ioread16(ks->hw_addr);
}
/**
@@ -529,7 +573,7 @@ static inline void ks_outblk(struct ks_n
{
len >>= 1;
while (len--)
- iowrite16(cpu_to_be16(*wptr++), ks->hw_addr);
+ iowrite16(*wptr++, ks->hw_addr);
}
static void ks_disable_int(struct ks_net *ks)
@@ -1535,6 +1579,10 @@ static int ks8851_probe(struct platform_
goto err_free;
}
+ err = ks_check_endian(ks);
+ if (err)
+ goto err_free;
+
netdev->irq = platform_get_irq(pdev, 0);
if ((int)netdev->irq < 0) {
From: Lyude Paul <[email protected]>
commit 9765635b30756eb74e05e260ac812659c296cd28 upstream.
This reverts commit:
c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
ugh.
In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is
where the problems start.
For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.
[ 45.062001] ==================================================================
[ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53
[ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3
[ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[ 45.062641] Call Trace:
[ 45.062685] dump_stack+0xbd/0x15a
[ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b
[ 45.062801] ? printk+0x9f/0xc5
[ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4
[ 45.062909] ? ex_handler_refcount+0x146/0x180
[ 45.062970] print_address_description+0x71/0x239
[ 45.063036] ? ex_handler_refcount+0x146/0x180
[ 45.063095] kasan_report.cold.5+0x242/0x30b
[ 45.063155] __asan_report_store4_noabort+0x1c/0x20
[ 45.063313] ex_handler_refcount+0x146/0x180
[ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0
[ 45.063428] fixup_exception+0x98/0xd7
[ 45.063484] ? raw_notifier_call_chain+0x20/0x20
[ 45.063548] do_trap+0x6d/0x210
[ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063732] do_error_trap+0xc0/0x170
[ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.063929] do_invalid_op+0x3b/0x50
[ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064103] invalid_op+0x14/0x20
[ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915]
[ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915]
[ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915]
[ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[ 45.066054] ? kasan_check_write+0x14/0x20
[ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915]
[ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915]
[ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915]
[ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm]
[ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm]
[ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[ 45.067249] ? kasan_check_read+0x11/0x20
[ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[ 45.067364] ? kasan_check_read+0x11/0x20
[ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[ 45.067508] ? kasan_check_write+0x14/0x20
[ 45.070360] ? mutex_unlock+0x22/0x40
[ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915]
[ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[ 45.095851] ? kasan_check_write+0x14/0x20
[ 45.098473] ? kasan_check_read+0x11/0x20
[ 45.101155] ? strscpy+0x17c/0x530
[ 45.103808] ? __switch_to_asm+0x34/0x70
[ 45.106456] ? syscall_return_via_sysret+0xf/0x7f
[ 45.109711] ? read_word_at_a_time+0x20/0x20
[ 45.113138] ? __switch_to_asm+0x40/0x70
[ 45.116529] ? __switch_to_asm+0x34/0x70
[ 45.119891] ? __switch_to_asm+0x40/0x70
[ 45.123224] ? __switch_to_asm+0x34/0x70
[ 45.126540] ? __switch_to_asm+0x34/0x70
[ 45.129824] process_one_work+0x88d/0x15d0
[ 45.133172] ? pool_mayday_timeout+0x850/0x850
[ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128
[ 45.139739] ? wake_q_add+0xb0/0xb0
[ 45.143010] ? check_preempt_wakeup+0x652/0x1050
[ 45.146304] ? worker_enter_idle+0x29e/0x740
[ 45.149589] ? __schedule+0x1ec0/0x1ec0
[ 45.152937] ? kasan_check_read+0x11/0x20
[ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130
[ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 45.162542] ? kasan_check_write+0x14/0x20
[ 45.165657] worker_thread+0x1a5/0x1470
[ 45.168725] ? set_load_weight+0x2e0/0x2e0
[ 45.171755] ? process_one_work+0x15d0/0x15d0
[ 45.174806] ? __switch_to_asm+0x34/0x70
[ 45.177645] ? __switch_to_asm+0x40/0x70
[ 45.180323] ? __switch_to_asm+0x34/0x70
[ 45.182936] ? __switch_to_asm+0x40/0x70
[ 45.185539] ? __switch_to_asm+0x34/0x70
[ 45.188100] ? __switch_to_asm+0x40/0x70
[ 45.190628] ? __schedule+0x7d4/0x1ec0
[ 45.193143] ? save_stack+0xa9/0xd0
[ 45.195632] ? kasan_check_write+0x10/0x20
[ 45.198162] ? kasan_kmalloc+0xc4/0xe0
[ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190
[ 45.203046] ? kthread+0x9f/0x3b0
[ 45.205470] ? ret_from_fork+0x35/0x40
[ 45.207876] ? unwind_next_frame+0x43/0x50
[ 45.210273] ? __save_stack_trace+0x82/0x100
[ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580
[ 45.215026] ? default_wake_function+0x35/0x50
[ 45.217399] ? kasan_check_read+0x11/0x20
[ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140
[ 45.222174] ? __lock_text_start+0x8/0x8
[ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f
[ 45.226868] ? __kthread_parkme+0x87/0xf0
[ 45.229200] kthread+0x2f7/0x3b0
[ 45.231557] ? process_one_work+0x15d0/0x15d0
[ 45.233923] ? kthread_park+0x120/0x120
[ 45.236249] ret_from_fork+0x35/0x40
[ 45.240875] Allocated by task 242:
[ 45.243136] save_stack+0x43/0xd0
[ 45.245385] kasan_kmalloc+0xc4/0xe0
[ 45.247597] kmem_cache_alloc_trace+0xdd/0x190
[ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[ 45.259200] process_one_work+0x88d/0x15d0
[ 45.261597] worker_thread+0x1a5/0x1470
[ 45.264038] kthread+0x2f7/0x3b0
[ 45.266371] ret_from_fork+0x35/0x40
[ 45.270937] Freed by task 53:
[ 45.273170] save_stack+0x43/0xd0
[ 45.275382] __kasan_slab_free+0x139/0x190
[ 45.277604] kasan_slab_free+0xe/0x10
[ 45.279826] kfree+0x99/0x1b0
[ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[ 45.286660] process_one_work+0x88d/0x15d0
[ 45.288934] worker_thread+0x1a5/0x1470
[ 45.291231] kthread+0x2f7/0x3b0
[ 45.293547] ret_from_fork+0x35/0x40
[ 45.298206] The buggy address belongs to the object at ffff8882b4b70968
which belongs to the cache kmalloc-2k of size 2048
[ 45.303047] The buggy address is located 0 bytes inside of
2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[ 45.308010] The buggy address belongs to the page:
[ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[ 45.313051] flags: 0x8000000000010200(slab|head)
[ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[ 45.320966] page dumped because: kasan: bad access detected
[ 45.326312] Memory state around the buggy address:
[ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[ 45.337302] ^
[ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 45.345748] ==================================================================
So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.
If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.
What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.
Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.
Signed-off-by: Lyude Paul <[email protected]>
Fixes: c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Jerry Zuo <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: [email protected] # v4.6+
Acked-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -980,20 +980,9 @@ static struct drm_dp_mst_port *drm_dp_ms
static struct drm_dp_mst_port *drm_dp_get_validated_port_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
{
struct drm_dp_mst_port *rport = NULL;
-
mutex_lock(&mgr->lock);
- /*
- * Port may or may not be 'valid' but we don't care about that when
- * destroying the port and we are guaranteed that the port pointer
- * will be valid until we've finished
- */
- if (current_work() == &mgr->destroy_connector_work) {
- kref_get(&port->kref);
- rport = port;
- } else if (mgr->mst_primary) {
- rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary,
- port);
- }
+ if (mgr->mst_primary)
+ rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, port);
mutex_unlock(&mgr->lock);
return rport;
}
From: Johan Hovold <[email protected]>
commit 998912346c0da53a6dbb71fab3a138586b596b30 upstream.
Make sure to check that we have at least one endpoint before accessing
the endpoint array to avoid dereferencing a NULL-pointer on stream
start.
Note that these sanity checks are not redundant as the driver is mixing
looking up altsettings by index and by number, which need not coincide.
Fixes: 1876bb923c98 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge")
Fixes: b282d87332f5 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)")
Cc: stable <[email protected]> # 2.6.31
Cc: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/ov519.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -3482,6 +3482,11 @@ static void ov511_mode_init_regs(struct
return;
}
+ if (alt->desc.bNumEndpoints < 1) {
+ sd->gspca_dev.usb_err = -ENODEV;
+ return;
+ }
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
@@ -3607,6 +3612,11 @@ static void ov518_mode_init_regs(struct
return;
}
+ if (alt->desc.bNumEndpoints < 1) {
+ sd->gspca_dev.usb_err = -ENODEV;
+ return;
+ }
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
From: Qiujun Huang <[email protected]>
commit a1f165a6b738f0c9d744bad4af7a53909278f5fc upstream.
We should cancel hw->usb_work before kfree(hw).
Reported-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/wlan-ng/prism2usb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -179,6 +179,7 @@ static void prism2sta_disconnect_usb(str
cancel_work_sync(&hw->link_bh);
cancel_work_sync(&hw->commsqual_bh);
+ cancel_work_sync(&hw->usb_work);
/* Now we complete any outstanding commands
* and tell everyone who is waiting for their
From: Eric Biggers <[email protected]>
commit 7cf64b18b0b96e751178b8d0505d8466ff5a448f upstream.
vt_in_use() dereferences console_driver->ttys[i] without proper locking.
This is broken because the tty can be closed and freed concurrently.
We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL'
and skipping the check of tty_struct::count. But, looking at
console_driver->ttys[i] isn't really appropriate anyway because even if
it is NULL the tty can still be in the process of being closed.
Instead, fix it by making vt_in_use() require console_lock() and check
whether the vt is allocated and has port refcount > 1. This works since
following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use
virtual console" the port refcount is incremented while the vt is open.
Reproducer (very unreliable, but it worked for me after a few minutes):
#include <fcntl.h>
#include <linux/vt.h>
int main()
{
int fd, nproc;
struct vt_stat state;
char ttyname[16];
fd = open("/dev/tty10", O_RDONLY);
for (nproc = 1; nproc < 8; nproc *= 2)
fork();
for (;;) {
sprintf(ttyname, "/dev/tty%d", rand() % 8);
close(open(ttyname, O_RDONLY));
ioctl(fd, VT_GETSTATE, &state);
}
}
KASAN report:
BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
Read of size 4 at addr ffff888065722468 by task syz-vt2/132
CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
Call Trace:
[...]
vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
[...]
Allocated by task 136:
[...]
kzalloc include/linux/slab.h:669 [inline]
alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982
tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334
tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
[...]
Freed by task 41:
[...]
kfree+0xbf/0x200 mm/slab.c:3757
free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177
release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468
process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264
worker_thread+0x8b/0xc80 kernel/workqueue.c:2410
[...]
Fixes: 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <[email protected]> # v3.4+
Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -42,9 +42,15 @@ bool vt_dont_switch;
static inline bool vt_in_use(unsigned int i)
{
- extern struct tty_driver *console_driver;
+ const struct vc_data *vc = vc_cons[i].d;
- return console_driver->ttys[i] && console_driver->ttys[i]->count;
+ /*
+ * console_lock must be held to prevent the vc from being deallocated
+ * while we're checking whether it's in-use.
+ */
+ WARN_CONSOLE_UNLOCKED();
+
+ return vc && kref_read(&vc->port.kref) > 1;
}
static inline bool vt_busy(int i)
@@ -646,15 +652,16 @@ int vt_ioctl(struct tty_struct *tty,
struct vt_stat __user *vtstat = up;
unsigned short state, mask;
- /* Review: FIXME: Console lock ? */
if (put_user(fg_console + 1, &vtstat->v_active))
ret = -EFAULT;
else {
state = 1; /* /dev/tty0 is always open */
+ console_lock(); /* required by vt_in_use() */
for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
++i, mask <<= 1)
if (vt_in_use(i))
state |= mask;
+ console_unlock();
ret = put_user(state, &vtstat->v_state);
}
break;
@@ -664,10 +671,11 @@ int vt_ioctl(struct tty_struct *tty,
* Returns the first available (non-opened) console.
*/
case VT_OPENQRY:
- /* FIXME: locking ? - but then this is a stupid API */
+ console_lock(); /* required by vt_in_use() */
for (i = 0; i < MAX_NR_CONSOLES; ++i)
if (!vt_in_use(i))
break;
+ console_unlock();
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
goto setint;
From: Johan Hovold <[email protected]>
commit f52981019ad8d6718de79b425a574c6bddf81f7c upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid submitting an URB to an invalid endpoint.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc: stable <[email protected]> # 3.16
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb/dib0700_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/dvb-usb/dib0700_core.c
+++ b/drivers/media/usb/dvb-usb/dib0700_core.c
@@ -812,7 +812,7 @@ int dib0700_rc_setup(struct dvb_usb_devi
/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
- if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1)
+ if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1)
return -ENODEV;
purb = usb_alloc_urb(0, GFP_KERNEL);
@@ -832,7 +832,7 @@ int dib0700_rc_setup(struct dvb_usb_devi
* Some devices like the Hauppauge NovaTD model 52009 use an interrupt
* endpoint, while others use a bulk one.
*/
- e = &intf->altsetting[0].endpoint[rc_ep].desc;
+ e = &intf->cur_altsetting->endpoint[rc_ep].desc;
if (usb_endpoint_dir_in(e)) {
if (usb_endpoint_xfer_bulk(e)) {
pipe = usb_rcvbulkpipe(d->udev, rc_ep);
From: Johan Hovold <[email protected]>
commit a246b4d547708f33ff4d4b9a7a5dbac741dc89d8 upstream.
Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.
This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.
Note that the sanity check in cit_get_packet_size() is not redundant as
the driver is mixing looking up altsettings by index and by number,
which may not coincide.
Fixes: 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01")
Fixes: 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting")
Cc: stable <[email protected]> # 2.6.37
Cc: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/xirlink_cit.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/gspca/xirlink_cit.c
+++ b/drivers/media/usb/gspca/xirlink_cit.c
@@ -1455,6 +1455,9 @@ static int cit_get_packet_size(struct gs
return -EIO;
}
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
return le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
}
@@ -2638,6 +2641,7 @@ static int sd_start(struct gspca_dev *gs
static int sd_isoc_init(struct gspca_dev *gspca_dev)
{
+ struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
int max_packet_size;
@@ -2653,8 +2657,17 @@ static int sd_isoc_init(struct gspca_dev
break;
}
+ intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+ if (intfc->num_altsetting < 2)
+ return -ENODEV;
+
+ alt = &intfc->altsetting[1];
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
- alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
return 0;
@@ -2677,6 +2690,9 @@ static int sd_isoc_nego(struct gspca_dev
break;
}
+ /*
+ * Existence of altsetting and endpoint was verified in sd_isoc_init()
+ */
alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
if (packet_size <= min_packet_size)
From: Johan Hovold <[email protected]>
commit bca243b1ce0e46be26f7c63b5591dfbb41f558e5 upstream.
commit 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking") added
an endpoint sanity check to address a NULL-pointer dereference on probe.
Unfortunately the check was done on the current altsetting which was later
changed.
Fix this by moving the sanity check to after the altsetting is changed.
Fixes: 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking")
Cc: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/b2c2/flexcop-usb.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -511,6 +511,9 @@ static int flexcop_usb_init(struct flexc
return ret;
}
+ if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
switch (fc_usb->udev->speed) {
case USB_SPEED_LOW:
err("cannot handle USB speed because it is too slow.");
@@ -544,9 +547,6 @@ static int flexcop_usb_probe(struct usb_
struct flexcop_device *fc = NULL;
int ret;
- if (intf->cur_altsetting->desc.bNumEndpoints < 1)
- return -ENODEV;
-
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
err("out of memory\n");
return -ENOMEM;
From: disconnect3d <[email protected]>
commit db2c549407d4a76563c579e4768f7d6d32afefba upstream.
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Changbin Du <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Keeping <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Michael Lentine <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/map.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -88,7 +88,7 @@ static inline bool replace_android_lib(c
return true;
}
- if (!strncmp(filename, "/system/lib/", 11)) {
+ if (!strncmp(filename, "/system/lib/", 12)) {
char *ndk, *app;
const char *arch;
size_t ndk_length;
From: Jiri Slaby <[email protected]>
commit f400991bf872debffb01c46da882dc97d7e3248e upstream.
vt_dont_switch is pure boolean, no need for whole char.
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 6 +++---
include/linux/vt_kern.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -38,7 +38,7 @@
#include <linux/kbd_diacr.h>
#include <linux/selection.h>
-char vt_dont_switch;
+bool vt_dont_switch;
static inline bool vt_in_use(unsigned int i)
{
@@ -1029,12 +1029,12 @@ int vt_ioctl(struct tty_struct *tty,
case VT_LOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
- vt_dont_switch = 1;
+ vt_dont_switch = true;
break;
case VT_UNLOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
- vt_dont_switch = 0;
+ vt_dont_switch = false;
break;
case VT_GETHIFONTMASK:
ret = put_user(vc->vc_hi_font_mask,
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -141,7 +141,7 @@ static inline bool vt_force_oops_output(
return false;
}
-extern char vt_dont_switch;
+extern bool vt_dont_switch;
extern int default_utf8;
extern int global_cursor_default;
From: Eric Biggers <[email protected]>
commit a65cab7d7f05c2061a3e2490257d3086ff3202c6 upstream.
Reading from a debugfs file at a nonzero position, without first reading
at position 0, leaks uninitialized memory to userspace.
It's a bit tricky to do this, since lseek() and pread() aren't allowed
on these files, and write() doesn't update the position on them. But
writing to them with splice() *does* update the position:
#define _GNU_SOURCE 1
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
int main()
{
int pipes[2], fd, n, i;
char buf[32];
pipe(pipes);
write(pipes[1], "0", 1);
fd = open("/sys/kernel/debug/fault_around_bytes", O_RDWR);
splice(pipes[0], NULL, fd, NULL, 1, 0);
n = read(fd, buf, sizeof(buf));
for (i = 0; i < n; i++)
printf("%02x", buf[i]);
printf("\n");
}
Output:
5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a30
Fix the infoleak by making simple_attr_read() always fill
simple_attr::get_buf if it hasn't been filled yet.
Reported-by: [email protected]
Reported-by: Alexander Potapenko <[email protected]>
Fixes: acaefc25d21f ("[PATCH] libfs: add simple attribute files")
Cc: [email protected]
Signed-off-by: Eric Biggers <[email protected]>
Acked-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/libfs.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -799,7 +799,7 @@ int simple_attr_open(struct inode *inode
{
struct simple_attr *attr;
- attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
if (!attr)
return -ENOMEM;
@@ -839,9 +839,11 @@ ssize_t simple_attr_read(struct file *fi
if (ret)
return ret;
- if (*ppos) { /* continued read */
+ if (*ppos && attr->get_buf[0]) {
+ /* continued read */
size = strlen(attr->get_buf);
- } else { /* first read */
+ } else {
+ /* first read */
u64 val;
ret = attr->get(attr->data, &val);
if (ret)
From: Larry Finger <[email protected]>
commit 38ef48f7d4b7342f145a1b4f96023bde99aeb245 upstream.
The ASUS USB-N10 Nano B1 has been reported as a new RTL8188EU device.
Add it to the device tables.
Signed-off-by: Larry Finger <[email protected]>
Reported-by: kovi <[email protected]>
Cc: Stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c
+++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c
@@ -40,6 +40,7 @@ static struct usb_device_id rtw_usb_id_t
/****** 8188EUS ********/
{USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */
{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
+ {USB_DEVICE(0x0B05, 0x18F0)}, /* ASUS USB-N10 Nano B1 */
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
From: Ilie Halip <[email protected]>
commit 6f5459da2b8736720afdbd67c4bd2d1edba7d0e3 upstream.
Building an arm64 defconfig with clang's integrated assembler, this error
occurs:
<instantiation>:2:2: error: unrecognized instruction mnemonic
_ASM_EXTABLE 9999b, 9f
^
arch/arm64/mm/cache.S:50:1: note: while in macro instantiation
user_alt 9f, "dc cvau, x4", "dc civac, x4", 0
^
While GNU as seems fine with case-sensitive macro instantiations, clang
doesn't, so use the actual macro name (_asm_extable) as in the rest of
the file.
Also checked that the generated assembly matches the GCC output.
Reviewed-by: Nick Desaulniers <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Fixes: 290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core")
Link: https://github.com/ClangBuiltLinux/linux/issues/924
Signed-off-by: Ilie Halip <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/alternative.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -215,7 +215,7 @@ alternative_endif
.macro user_alt, label, oldinstr, newinstr, cond
9999: alternative_insn "\oldinstr", "\newinstr", \cond
- _ASM_EXTABLE 9999b, \label
+ _asm_extable 9999b, \label
.endm
/*
From: Qiujun Huang <[email protected]>
commit 1165dd73e811a07d947aee218510571f516081f6 upstream.
We can't handle the case length > WLAN_DATA_MAXLEN.
Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't
read more than that.
Thanks-to: Hillf Danton <[email protected]>
Reported-and-tested-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/wlan-ng/hfa384x_usb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -3443,6 +3443,8 @@ static void hfa384x_int_rxmonitor(struct
WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
pr_debug("overlen frm: len=%zd\n",
skblen - sizeof(struct p80211_caphdr));
+
+ return;
}
skb = dev_alloc_skb(skblen);
From: Johan Hovold <[email protected]>
commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream.
Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.
This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.
Note that the sanity checks in stv06xx_start() and pb0100_start() are
not redundant as the driver is mixing looking up altsettings by index
and by number, which may not coincide.
Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor")
Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing")
Cc: stable <[email protected]> # 2.6.31
Cc: Hans de Goede <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/stv06xx/stv06xx.c | 19 ++++++++++++++++++-
drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c | 4 ++++
2 files changed, 22 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -293,6 +293,9 @@ static int stv06xx_start(struct gspca_de
return -EIO;
}
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
if (err < 0)
@@ -317,11 +320,21 @@ out:
static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
{
+ struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
struct sd *sd = (struct sd *) gspca_dev;
+ intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+ if (intfc->num_altsetting < 2)
+ return -ENODEV;
+
+ alt = &intfc->altsetting[1];
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
- alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
alt->endpoint[0].desc.wMaxPacketSize =
cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
@@ -334,6 +347,10 @@ static int stv06xx_isoc_nego(struct gspc
struct usb_host_interface *alt;
struct sd *sd = (struct sd *) gspca_dev;
+ /*
+ * Existence of altsetting and endpoint was verified in
+ * stv06xx_isoc_init()
+ */
alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
--- a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
@@ -198,6 +198,10 @@ static int pb0100_start(struct sd *sd)
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt)
return -ENODEV;
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
/* If we don't have enough bandwidth use a lower framerate */
From: Greg Kroah-Hartman <[email protected]>
commit 8096f229421f7b22433775e928d506f0342e5907 upstream.
For the bpf syscall, we are relying on the compiler to properly zero out
the bpf_attr union that we copy userspace data into. Unfortunately that
doesn't always work properly, padding and other oddities might not be
correctly zeroed, and in some tests odd things have been found when the
stack is pre-initialized to other values.
Fix this by explicitly memsetting the structure to 0 before using it.
Reported-by: Maciej Żenczykowski <[email protected]>
Reported-by: John Stultz <[email protected]>
Reported-by: Alexander Potapenko <[email protected]>
Reported-by: Alistair Delva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://android-review.googlesource.com/c/kernel/common/+/1235490
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/syscall.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -802,7 +802,7 @@ static int bpf_obj_get(const union bpf_a
SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, size)
{
- union bpf_attr attr = {};
+ union bpf_attr attr;
int err;
if (sysctl_unprivileged_bpf_disabled && !capable(CAP_SYS_ADMIN))
@@ -838,6 +838,7 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf
}
/* copy attributes from user space, may be less than sizeof(bpf_attr) */
+ memset(&attr, 0, sizeof(attr));
if (copy_from_user(&attr, uattr, size) != 0)
return -EFAULT;
From: YueHaibing <[email protected]>
commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream.
After xfrm_add_policy add a policy, its ref is 2, then
xfrm_policy_timer
read_lock
xp->walk.dead is 0
....
mod_timer()
xfrm_policy_kill
policy->walk.dead = 1
....
del_timer(&policy->timer)
xfrm_pol_put //ref is 1
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_pol_hold //ref is 1
read_unlock
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_policy_destroy is called twice, which may leads to
double free.
Call Trace:
RIP: 0010:refcount_warn_saturate+0x161/0x210
...
xfrm_policy_timer+0x522/0x600
call_timer_fn+0x1b3/0x5e0
? __xfrm_decode_session+0x2990/0x2990
? msleep+0xb0/0xb0
? _raw_spin_unlock_irq+0x24/0x40
? __xfrm_decode_session+0x2990/0x2990
? __xfrm_decode_session+0x2990/0x2990
run_timer_softirq+0x5c5/0x10e0
Fix this by use write_lock_bh in xfrm_policy_kill.
Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Timo Teräs <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_policy.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -336,7 +336,9 @@ EXPORT_SYMBOL(xfrm_policy_destroy);
static void xfrm_policy_kill(struct xfrm_policy *policy)
{
+ write_lock_bh(&policy->lock);
policy->walk.dead = 1;
+ write_unlock_bh(&policy->lock);
atomic_inc(&policy->genid);
From: Edward Cree <[email protected]>
commit df81dfcfd6991d547653d46c051bac195cd182c1 upstream.
The handling of notify->work did not properly maintain notify->kref in two
cases:
1) where the work was already scheduled, another irq_set_affinity_locked()
would get the ref and (no-op-ly) schedule the work. Thus when
irq_affinity_notify() ran, it would drop the original ref but not the
additional one.
2) when cancelling the (old) work in irq_set_affinity_notifier(), if there
was outstanding work a ref had been got for it but was never put.
Fix both by checking the return values of the work handling functions
(schedule_work() for (1) and cancel_work_sync() for (2)) and put the
extra ref if the return value indicates preexisting work.
Fixes: cd7eab44e994 ("genirq: Add IRQ affinity notifiers")
Fixes: 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption")
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Ben Hutchings <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/irq/manage.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -233,7 +233,11 @@ int irq_set_affinity_locked(struct irq_d
if (desc->affinity_notify) {
kref_get(&desc->affinity_notify->kref);
- schedule_work(&desc->affinity_notify->work);
+ if (!schedule_work(&desc->affinity_notify->work)) {
+ /* Work was already scheduled, drop our extra ref */
+ kref_put(&desc->affinity_notify->kref,
+ desc->affinity_notify->release);
+ }
}
irqd_set(data, IRQD_AFFINITY_SET);
@@ -333,7 +337,10 @@ irq_set_affinity_notifier(unsigned int i
raw_spin_unlock_irqrestore(&desc->lock, flags);
if (old_notify) {
- cancel_work_sync(&old_notify->work);
+ if (cancel_work_sync(&old_notify->work)) {
+ /* Pending work had a ref, put that one too */
+ kref_put(&old_notify->kref, old_notify->release);
+ }
kref_put(&old_notify->kref, old_notify->release);
}
From: Nicolas Dichtel <[email protected]>
commit f1ed10264ed6b66b9cd5e8461cffce69be482356 upstream.
I forgot the 4in6/6in4 cases in my previous patch. Let's fix them.
Fixes: 95224166a903 ("vti[6]: fix packet tx through bpf_redirect()")
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/Kconfig | 1 +
net/ipv4/ip_vti.c | 36 +++++++++++++++++++++++++++++-------
net/ipv6/ip6_vti.c | 32 +++++++++++++++++++++++++-------
3 files changed, 55 insertions(+), 14 deletions(-)
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -298,6 +298,7 @@ config SYN_COOKIES
config NET_IPVTI
tristate "Virtual (secure) IP: tunneling"
+ depends on IPV6 || IPV6=n
select INET_TUNNEL
select NET_IP_TUNNEL
depends on INET_XFRM_MODE_TUNNEL
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -208,17 +208,39 @@ static netdev_tx_t vti_xmit(struct sk_bu
int mtu;
if (!dst) {
- struct rtable *rt;
+ switch (skb->protocol) {
+ case htons(ETH_P_IP): {
+ struct rtable *rt;
- fl->u.ip4.flowi4_oif = dev->ifindex;
- fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
- rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
- if (IS_ERR(rt)) {
+ fl->u.ip4.flowi4_oif = dev->ifindex;
+ fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+ rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+ if (IS_ERR(rt)) {
+ dev->stats.tx_carrier_errors++;
+ goto tx_error_icmp;
+ }
+ dst = &rt->dst;
+ skb_dst_set(skb, dst);
+ break;
+ }
+#if IS_ENABLED(CONFIG_IPV6)
+ case htons(ETH_P_IPV6):
+ fl->u.ip6.flowi6_oif = dev->ifindex;
+ fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+ dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+ if (dst->error) {
+ dst_release(dst);
+ dst = NULL;
+ dev->stats.tx_carrier_errors++;
+ goto tx_error_icmp;
+ }
+ skb_dst_set(skb, dst);
+ break;
+#endif
+ default:
dev->stats.tx_carrier_errors++;
goto tx_error_icmp;
}
- dst = &rt->dst;
- skb_dst_set(skb, dst);
}
dst_hold(dst);
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -454,15 +454,33 @@ vti6_xmit(struct sk_buff *skb, struct ne
int mtu;
if (!dst) {
- fl->u.ip6.flowi6_oif = dev->ifindex;
- fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
- dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
- if (dst->error) {
- dst_release(dst);
- dst = NULL;
+ switch (skb->protocol) {
+ case htons(ETH_P_IP): {
+ struct rtable *rt;
+
+ fl->u.ip4.flowi4_oif = dev->ifindex;
+ fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+ rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+ if (IS_ERR(rt))
+ goto tx_err_link_failure;
+ dst = &rt->dst;
+ skb_dst_set(skb, dst);
+ break;
+ }
+ case htons(ETH_P_IPV6):
+ fl->u.ip6.flowi6_oif = dev->ifindex;
+ fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+ dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+ if (dst->error) {
+ dst_release(dst);
+ dst = NULL;
+ goto tx_err_link_failure;
+ }
+ skb_dst_set(skb, dst);
+ break;
+ default:
goto tx_err_link_failure;
}
- skb_dst_set(skb, dst);
}
dst_hold(dst);
From: Jiri Slaby <[email protected]>
commit dce05aa6eec977f1472abed95ccd71276b9a3864 upstream.
Avoid global variables (namely sel_cons) by introducing vc_is_sel. It
checks whether the parameter is the current selection console. This will
help putting sel_cons to a struct later.
Signed-off-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/selection.c | 5 +++++
drivers/tty/vt/vt.c | 7 ++++---
drivers/tty/vt/vt_ioctl.c | 2 +-
include/linux/selection.h | 4 +++-
4 files changed, 13 insertions(+), 5 deletions(-)
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -80,6 +80,11 @@ void clear_selection(void)
}
}
+bool vc_is_sel(struct vc_data *vc)
+{
+ return vc == sel_cons;
+}
+
/*
* User settable table: what characters are to be considered alphabetic?
* 256 bits. Locked by the console lock.
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -595,8 +595,9 @@ static void hide_softcursor(struct vc_da
static void hide_cursor(struct vc_data *vc)
{
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
+
vc->vc_sw->con_cursor(vc, CM_ERASE);
hide_softcursor(vc);
}
@@ -606,7 +607,7 @@ static void set_cursor(struct vc_data *v
if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS)
return;
if (vc->vc_deccm) {
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
add_softcursor(vc);
if ((vc->vc_cursor_type & 0x0f) != 1)
@@ -876,7 +877,7 @@ static int vc_do_resize(struct tty_struc
if (!newscreen)
return -ENOMEM;
- if (vc == sel_cons)
+ if (vc_is_sel(vc))
clear_selection();
old_rows = vc->vc_rows;
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -42,7 +42,7 @@ char vt_dont_switch;
extern struct tty_driver *console_driver;
#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_is_sel(vc_cons[i].d))
/*
* Console (vt and kd) routines, as defined by USL SVR4 manual, and by
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -12,8 +12,8 @@
struct tty_struct;
-extern struct vc_data *sel_cons;
struct tty_struct;
+struct vc_data;
extern void clear_selection(void);
extern int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty);
@@ -22,6 +22,8 @@ extern int sel_loadlut(char __user *p);
extern int mouse_reporting(void);
extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
+bool vc_is_sel(struct vc_data *vc);
+
extern int console_blanked;
extern const unsigned char color_table[];
From: Chuhong Yuan <[email protected]>
commit e1b9f99ff8c40bba6e59de9ad4a659447b1e4112 upstream.
The driver forgets to disable and unprepare clk when remove.
Add a call to clk_disable_unprepare to fix it.
Signed-off-by: Chuhong Yuan <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-hix5hd2.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -498,6 +498,7 @@ static int hix5hd2_i2c_remove(struct pla
i2c_del_adapter(&priv->adap);
pm_runtime_disable(priv->dev);
pm_runtime_set_suspended(priv->dev);
+ clk_disable_unprepare(priv->clk);
return 0;
}
From: Sabrina Dubroca <[email protected]>
[ Upstream commit 28d35bcdd3925e7293408cdb8aa5f2aac5f0d6e3 ]
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is
received, we must clamp its value. However, we can receive a PMTU
exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an
increase in PMTU.
To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.
Before this patch, in case of an update, the exception's MTU would
always change. Now, an exception can have only its lock flag updated,
but not the MTU, so we need to add a check on locking to the following
"is this exception getting updated, or close to expiring?" test.
Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
Signed-off-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/route.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 6058dbc4e2c19..8f5c6fa54ac09 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -991,21 +991,22 @@ out: kfree_skb(skb);
static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu)
{
struct dst_entry *dst = &rt->dst;
+ u32 old_mtu = ipv4_mtu(dst);
struct fib_result res;
bool lock = false;
if (ip_mtu_locked(dst))
return;
- if (ipv4_mtu(dst) < mtu)
+ if (old_mtu < mtu)
return;
if (mtu < ip_rt_min_pmtu) {
lock = true;
- mtu = ip_rt_min_pmtu;
+ mtu = min(old_mtu, ip_rt_min_pmtu);
}
- if (rt->rt_pmtu == mtu &&
+ if (rt->rt_pmtu == mtu && !lock &&
time_before(jiffies, dst->expires - ip_rt_mtu_expires / 2))
return;
--
2.20.1
From: Eric Biggers <[email protected]>
commit 1aa6e058dd6cd04471b1f21298270014daf48ac9 upstream.
The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are
unnecessary because they can only be reached by calling ioctl() on an
open tty, which implies the corresponding virtual console is allocated.
And even if the virtual console *could* be freed concurrently, then
these checks would be broken since they aren't done under console_lock,
and the vc_data is dereferenced before them anyway.
So, remove these unneeded checks to avoid confusion.
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt_ioctl.c | 21 ++-------------------
1 file changed, 2 insertions(+), 19 deletions(-)
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -353,22 +353,13 @@ int vt_ioctl(struct tty_struct *tty,
{
struct vc_data *vc = tty->driver_data;
struct console_font_op op; /* used in multiple places here */
- unsigned int console;
+ unsigned int console = vc->vc_num;
unsigned char ucval;
unsigned int uival;
void __user *up = (void __user *)arg;
int i, perm;
int ret = 0;
- console = vc->vc_num;
-
-
- if (!vc_cons_allocated(console)) { /* impossible? */
- ret = -ENOIOCTLCMD;
- goto out;
- }
-
-
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1202,18 +1193,10 @@ long vt_compat_ioctl(struct tty_struct *
{
struct vc_data *vc = tty->driver_data;
struct console_font_op op; /* used in multiple places here */
- unsigned int console;
void __user *up = (void __user *)arg;
int perm;
int ret = 0;
- console = vc->vc_num;
-
- if (!vc_cons_allocated(console)) { /* impossible? */
- ret = -ENOIOCTLCMD;
- goto out;
- }
-
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1273,7 +1256,7 @@ long vt_compat_ioctl(struct tty_struct *
arg = (unsigned long)compat_ptr(arg);
goto fallback;
}
-out:
+
return ret;
fallback:
From: Taehee Yoo <[email protected]>
[ Upstream commit 384d91c267e621e0926062cfb3f20cb72dc16928 ]
gro_cells_init() returns error if memory allocation is failed.
But the vxlan module doesn't check the return value of gro_cells_init().
Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")`
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/vxlan.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2354,10 +2354,19 @@ static void vxlan_vs_add_dev(struct vxla
/* Setup stats when device is created */
static int vxlan_init(struct net_device *dev)
{
+ struct vxlan_dev *vxlan = netdev_priv(dev);
+ int err;
+
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
+ err = gro_cells_init(&vxlan->gro_cells, dev);
+ if (err) {
+ free_percpu(dev->tstats);
+ return err;
+ }
+
return 0;
}
@@ -2623,8 +2632,6 @@ static void vxlan_setup(struct net_devic
vxlan->dev = dev;
- gro_cells_init(&vxlan->gro_cells, dev);
-
for (h = 0; h < FDB_HASH_SIZE; ++h)
INIT_HLIST_HEAD(&vxlan->fdb_head[h]);
}
From: Marek Szyprowski <[email protected]>
[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]
Properly propagate error value from devm_regulator_bulk_get() and don't
confuse user with meaningless warning about failure in getting regulators
in case of deferred probe.
Signed-off-by: Marek Szyprowski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index e07cb1fe48604..5e202af7fbf53 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1775,8 +1775,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
dsi->supplies);
if (ret) {
- dev_info(dev, "failed to get regulators: %d\n", ret);
- return -EPROBE_DEFER;
+ if (ret != -EPROBE_DEFER)
+ dev_info(dev, "failed to get regulators: %d\n", ret);
+ return ret;
}
dsi->clks = devm_kzalloc(dev,
--
2.20.1
From: Pawel Dembicki <[email protected]>
commit 007d20dca2376a751b1dad03442f118438b7e65e upstream.
ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1690 ProdID=7588 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
Tested on openwrt distribution.
Co-developed-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1983,6 +1983,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
+ { USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */
+ .driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */
From: Johan Hovold <[email protected]>
commit f16023834863932f95dfad13fac3fc47f77d2f29 upstream.
Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).
loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by making sure the buffer is large enough the concatenated
strings.
Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/greybus/tools/loopback_test.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/greybus/tools/loopback_test.c
+++ b/drivers/staging/greybus/tools/loopback_test.c
@@ -646,7 +646,7 @@ baddir:
static int open_poll_files(struct loopback_test *t)
{
struct loopback_device *dev;
- char buf[MAX_STR_LEN];
+ char buf[MAX_SYSFS_PATH + MAX_STR_LEN];
char dummy;
int fds_idx = 0;
int i;
From: Pawel Dembicki <[email protected]>
commit 6cb2669cb97fc4fdf526127159ac59caae052247 upstream.
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2020 ProdID=2033 Rev= 2.28
S: Manufacturer=Mobile Connect
S: Product=Mobile Connect
S: SerialNumber=f842866cfd5a
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Co-developed-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Cezary Jackiewicz <[email protected]>
Signed-off-by: Pawel Dembicki <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1987,6 +1987,8 @@ static const struct usb_device_id option
.driver_info = RSVD(1) | RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
.driver_info = RSVD(4) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff), /* BroadMobi BM806U */
+ .driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
From: Xin Long <[email protected]>
commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream.
Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be
out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by
syz:
BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430
Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650
Call Trace:
dump_stack+0xe8/0x16e
print_address_description.cold.3+0x9/0x23b
kasan_report.cold.4+0x64/0x95
memcpy+0x1f/0x50
selinux_xfrm_alloc_user+0x237/0x430
security_xfrm_policy_alloc+0x5c/0xb0
xfrm_policy_construct+0x2b1/0x650
xfrm_add_acquire+0x21d/0xa10
xfrm_user_rcv_msg+0x431/0x6f0
netlink_rcv_skb+0x15a/0x410
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x50e/0x6a0
netlink_sendmsg+0x8ae/0xd40
sock_sendmsg+0x133/0x170
___sys_sendmsg+0x834/0x9a0
__sys_sendmsg+0x100/0x1e0
do_syscall_64+0xe5/0x660
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
So fix it by adding the missing verify_sec_ctx_len check there.
Fixes: 980ebd25794f ("[IPSEC]: Sync series - acquire insert")
Reported-by: Hangbin Liu <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_user.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2178,6 +2178,9 @@ static int xfrm_add_acquire(struct sk_bu
err = verify_newpolicy_info(&ua->policy);
if (err)
goto free_state;
+ err = verify_sec_ctx_len(attrs);
+ if (err)
+ goto free_state;
/* build an XP */
xp = xfrm_policy_construct(net, &ua->policy, attrs, &err);
From: Anthony Mallet <[email protected]>
[ Upstream commit 633e2b2ded739a34bd0fb1d8b5b871f7e489ea29 ]
close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.
Signed-off-by: Anthony Mallet <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/class/cdc-acm.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b2edbd4bf8c44..9fd1cd99aa977 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -828,10 +828,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
tmp.flags = ASYNC_LOW_LATENCY;
tmp.xmit_fifo_size = acm->writesize;
tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
- tmp.close_delay = acm->port.close_delay / 10;
+ tmp.close_delay = jiffies_to_msecs(acm->port.close_delay) / 10;
tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- acm->port.closing_wait / 10;
+ jiffies_to_msecs(acm->port.closing_wait) / 10;
if (copy_to_user(info, &tmp, sizeof(tmp)))
return -EFAULT;
@@ -849,9 +849,10 @@ static int set_serial_info(struct acm *acm,
if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
return -EFAULT;
- close_delay = new_serial.close_delay * 10;
+ close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
- ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+ ASYNC_CLOSING_WAIT_NONE :
+ msecs_to_jiffies(new_serial.closing_wait * 10);
mutex_lock(&acm->port.mutex);
--
2.20.1
From: Martin K. Petersen <[email protected]>
commit ea697a8bf5a4161e59806fab14f6e4a46dc7dcb0 upstream.
Some USB bridge devices will return a default set of characteristics during
initialization. And then, once an attached drive has spun up, substitute
the actual parameters reported by the drive. According to the SCSI spec,
the device should return a UNIT ATTENTION in case any reported parameters
change. But in this case the change is made silently after a small window
where default values are reported.
Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of
physical block size") validated the reported optimal I/O size against the
physical block size to overcome problems with devices reporting nonsensical
transfer sizes. However, this validation did not account for the fact that
aforementioned devices will return default values during a brief window
during spin-up. The subsequent change in reported characteristics would
invalidate the checking that had previously been performed.
Unset a previously configured optimal I/O size should the sanity checking
fail on subsequent revalidate attempts.
Link: https://lore.kernel.org/r/[email protected]
Cc: Bryan Gurney <[email protected]>
Cc: <[email protected]>
Reported-by: Bernhard Sulzer <[email protected]>
Tested-by: Bernhard Sulzer <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2949,9 +2949,11 @@ static int sd_revalidate_disk(struct gen
if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
- } else
+ } else {
+ q->limits.io_opt = 0;
rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
(sector_t)BLK_DEF_MAX_SECTORS);
+ }
/* Do not exceed controller limit */
rw_max = min(rw_max, queue_max_hw_sectors(q));
From: Linus Torvalds <[email protected]>
commit 5076190daded2197f62fe92cf69674488be44175 upstream.
This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub:
add missing TID bump..").
The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.
Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).
But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.
Acked-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2935,11 +2935,13 @@ redo:
barrier();
if (likely(page == c->page)) {
- set_freepointer(s, tail_obj, c->freelist);
+ void **freelist = READ_ONCE(c->freelist);
+
+ set_freepointer(s, tail_obj, freelist);
if (unlikely(!this_cpu_cmpxchg_double(
s->cpu_slab->freelist, s->cpu_slab->tid,
- c->freelist, tid,
+ freelist, tid,
head, next_tid(tid)))) {
note_cmpxchg_failure("slab_free", s, tid);
From: Mike Gilbert <[email protected]>
[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ]
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c | 2 +-
tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c | 2 +-
tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c | 2 ++
tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +-
4 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
index 2116df9ad8325..c097a3748674f 100644
--- a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
@@ -83,7 +83,7 @@ static struct pci_access *pci_acc;
static struct pci_dev *amd_fam14h_pci_dev;
static int nbp1_entered;
-struct timespec start_time;
+static struct timespec start_time;
static unsigned long long timediff;
#ifdef DEBUG
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
index 5b3205f162174..5277df27191f3 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -21,7 +21,7 @@ struct cpuidle_monitor cpuidle_sysfs_monitor;
static unsigned long long **previous_count;
static unsigned long long **current_count;
-struct timespec start_time;
+static struct timespec start_time;
static unsigned long long timediff;
static int cpuidle_get_count_percent(unsigned int id, double *percent,
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
index 05f953f0f0a0c..80a21cb67d94f 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -29,6 +29,8 @@ struct cpuidle_monitor *all_monitors[] = {
0
};
+int cpu_count;
+
static struct cpuidle_monitor *monitors[MONITORS_MAX];
static unsigned int avail_monitors;
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
index 9e43f3371fbc6..3558bbae2b5dc 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
@@ -18,7 +18,7 @@
#define CSTATE_NAME_LEN 5
#define CSTATE_DESC_LEN 60
-int cpu_count;
+extern int cpu_count;
/* Hard to define the right names ...: */
enum power_range_e {
--
2.20.1
From: Cristian Marussi <[email protected]>
commit d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream.
On a system with only one CPU online, when another one CPU panics while
starting-up, smp_send_stop() will fail to send any STOP message to the
other already online core, resulting in a system still responsive and
alive at the end of the panic procedure.
[ 186.700083] CPU3: shutdown
[ 187.075462] CPU2: shutdown
[ 187.162869] CPU1: shutdown
[ 188.689998] ------------[ cut here ]------------
[ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 188.692444] Modules linked in:
[ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104
[ 188.693175] Hardware name: Foundation-v8A (DT)
[ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[ 188.694183] pc : has_cpuid_feature+0xf0/0x348
[ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8
[ 188.694410] sp : ffff800011b1bf60
[ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000
[ 188.694707] x27: 0000000000000000 x26: 0000000000000000
[ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c
[ 188.694905] x23: 0000000000000000 x22: 0000000000000000
[ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38
[ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004
[ 188.695187] x17: 0000000000000000 x16: 0000000000000000
[ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa
[ 188.695371] x13: 0000000000000002 x12: 0000000000002592
[ 188.695472] x11: 0000000000000080 x10: 00400032b5503510
[ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204
[ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001
[ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000
[ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8
[ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480
[ 188.696253] Call trace:
[ 188.696410] has_cpuid_feature+0xf0/0x348
[ 188.696504] verify_local_elf_hwcaps+0x84/0xe8
[ 188.696591] check_local_cpu_capabilities+0x44/0x128
[ 188.696666] secondary_start_kernel+0xf4/0x188
[ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[ 188.698639] ---[ end trace 3f12ca47652f7b72 ]---
[ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task!
[ 188.699546] Kernel Offset: disabled
[ 188.699828] CPU features: 0x00004,20c02008
[ 188.700012] Memory Limit: none
[ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
[root@arch ~]# echo Helo
Helo
[root@arch ~]# cat /proc/cpuinfo | grep proce
processor : 0
Make smp_send_stop() account also for the online status of the calling CPU
while evaluating how many CPUs are effectively online: this way, the right
number of STOPs is sent, so enforcing a proper freeze of the system at the
end of panic even under the above conditions.
Fixes: 08e875c16a16c ("arm64: SMP support")
Reported-by: Dave Martin <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Cristian Marussi <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/smp.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -901,11 +901,22 @@ void tick_broadcast(const struct cpumask
}
#endif
+/*
+ * The number of CPUs online, not counting this CPU (which may not be
+ * fully online and so not counted in num_online_cpus()).
+ */
+static inline unsigned int num_other_online_cpus(void)
+{
+ unsigned int this_cpu_online = cpu_online(smp_processor_id());
+
+ return num_online_cpus() - this_cpu_online;
+}
+
void smp_send_stop(void)
{
unsigned long timeout;
- if (num_online_cpus() > 1) {
+ if (num_other_online_cpus()) {
cpumask_t mask;
cpumask_copy(&mask, cpu_online_mask);
@@ -919,10 +930,10 @@ void smp_send_stop(void)
/* Wait up to one second for other CPUs to stop */
timeout = USEC_PER_SEC;
- while (num_online_cpus() > 1 && timeout--)
+ while (num_other_online_cpus() && timeout--)
udelay(1);
- if (num_online_cpus() > 1)
+ if (num_other_online_cpus())
pr_warning("SMP: failed to stop secondary CPUs %*pbl\n",
cpumask_pr_args(cpu_online_mask));
}
From: Marek Szyprowski <[email protected]>
[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]
Writing to the built-in strings arrays doesn't work if driver is loaded
as kernel module. This is also considered as a bad pattern. Fix this by
adding a call to clk_get() with legacy clock name. This fixes following
kernel oops if driver is loaded as module:
Unable to handle kernel paging request at virtual address bf047978
pgd = (ptrval)
[bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
Internal error: Oops: 80f [#1] SMP ARM
Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
videodev: Linux video capture interface: v2.00
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
...
Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
...
[<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
[<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
[<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
[<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
[<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
[<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
[<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
[<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
[<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
[<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
[<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
[<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xd979bfa8 to 0xd979bff0)
...
---[ end trace db16efe05faab470 ]---
Signed-off-by: Marek Szyprowski <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 5e202af7fbf53..2b6c04acb24f5 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1790,9 +1790,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
if (IS_ERR(dsi->clks[i])) {
if (strcmp(clk_names[i], "sclk_mipi") == 0) {
- strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
- i--;
- continue;
+ dsi->clks[i] = devm_clk_get(dev,
+ OLD_SCLK_MIPI_CLK_NAME);
+ if (!IS_ERR(dsi->clks[i]))
+ continue;
}
dev_info(dev, "failed to get the clock: %s\n",
--
2.20.1
On 4/1/20 9:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.218 release.
> There are 102 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 384 pass: 384 fail: 0
Guenter
On 01/04/2020 17:17, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.218 release.
> There are 102 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.218-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.9.218-rc1-g61ccfbbfe9f6
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Wed, 1 Apr 2020 at 22:06, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.218 release.
> There are 102 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.218-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.218-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 61ccfbbfe9f63b4a44ef11f9ad40d362970cc8fc
git describe: v4.9.217-103-g61ccfbbfe9f6
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.217-103-g61ccfbbfe9f6
No regressions (compared to build v4.9.217)
No fixes (compared to build v4.9.217)
Ran 28143 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* ltp-commands-tests
* ltp-cve-tests
* ltp-math-tests
* network-basic-tests
* ltp-ipc-tests
* ltp-open-posix-tests
* spectre-meltdown-checker-test
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 4/1/20 10:17 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.218 release.
> There are 102 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.218-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 4/1/2020 9:17 AM, Greg Kroah-Hartman wrote:
> From: Florian Fainelli <[email protected]>
>
> [ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]
>
> When both the switch and the bridge are learning about new addresses,
> switch ports attached to the bridge would see duplicate ARP frames
> because both entities would attempt to send them.
>
> Fixes: 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
> Reported-by: Maxime Bizon <[email protected]>
> Signed-off-by: Florian Fainelli <[email protected]>
> Reviewed-by: Vivien Didelot <[email protected]>
> Signed-off-by: David S. Miller <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> ---
> net/dsa/tag_brcm.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> --- a/net/dsa/tag_brcm.c
> +++ b/net/dsa/tag_brcm.c
> @@ -84,6 +84,8 @@ static struct sk_buff *brcm_tag_xmit(str
> brcm_tag[2] = BRCM_IG_DSTMAP2_MASK;
> brcm_tag[3] = (1 << p->port) & BRCM_IG_DSTMAP1_MASK;
>
> + skb->offload_fwd_mark = 1;
This is incorrectly placed, the assignment should be in brcm_tag_rcv().
It looks like only linux-4.9.y is affected. Sorry for not noticing this
earlier. Do you want me to submit a correcting patch?
--
Florian
On Mon, Apr 06, 2020 at 05:42:16PM -0700, Florian Fainelli wrote:
>
>
> On 4/1/2020 9:17 AM, Greg Kroah-Hartman wrote:
> > From: Florian Fainelli <[email protected]>
> >
> > [ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]
> >
> > When both the switch and the bridge are learning about new addresses,
> > switch ports attached to the bridge would see duplicate ARP frames
> > because both entities would attempt to send them.
> >
> > Fixes: 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
> > Reported-by: Maxime Bizon <[email protected]>
> > Signed-off-by: Florian Fainelli <[email protected]>
> > Reviewed-by: Vivien Didelot <[email protected]>
> > Signed-off-by: David S. Miller <[email protected]>
> > Signed-off-by: Greg Kroah-Hartman <[email protected]>
> > ---
> > net/dsa/tag_brcm.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > --- a/net/dsa/tag_brcm.c
> > +++ b/net/dsa/tag_brcm.c
> > @@ -84,6 +84,8 @@ static struct sk_buff *brcm_tag_xmit(str
> > brcm_tag[2] = BRCM_IG_DSTMAP2_MASK;
> > brcm_tag[3] = (1 << p->port) & BRCM_IG_DSTMAP1_MASK;
> >
> > + skb->offload_fwd_mark = 1;
>
> This is incorrectly placed, the assignment should be in brcm_tag_rcv().
> It looks like only linux-4.9.y is affected. Sorry for not noticing this
> earlier. Do you want me to submit a correcting patch?
Yes please, that would make it easier for me.
thanks,
greg k-h
On Tue, Apr 07, 2020 at 07:42:27AM +0200, Greg Kroah-Hartman wrote:
> On Mon, Apr 06, 2020 at 05:42:16PM -0700, Florian Fainelli wrote:
> >
> >
> > On 4/1/2020 9:17 AM, Greg Kroah-Hartman wrote:
> > > From: Florian Fainelli <[email protected]>
> > >
> > > [ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]
> > >
> > > When both the switch and the bridge are learning about new addresses,
> > > switch ports attached to the bridge would see duplicate ARP frames
> > > because both entities would attempt to send them.
> > >
> > > Fixes: 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
> > > Reported-by: Maxime Bizon <[email protected]>
> > > Signed-off-by: Florian Fainelli <[email protected]>
> > > Reviewed-by: Vivien Didelot <[email protected]>
> > > Signed-off-by: David S. Miller <[email protected]>
> > > Signed-off-by: Greg Kroah-Hartman <[email protected]>
> > > ---
> > > net/dsa/tag_brcm.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > --- a/net/dsa/tag_brcm.c
> > > +++ b/net/dsa/tag_brcm.c
> > > @@ -84,6 +84,8 @@ static struct sk_buff *brcm_tag_xmit(str
> > > brcm_tag[2] = BRCM_IG_DSTMAP2_MASK;
> > > brcm_tag[3] = (1 << p->port) & BRCM_IG_DSTMAP1_MASK;
> > >
> > > + skb->offload_fwd_mark = 1;
> >
> > This is incorrectly placed, the assignment should be in brcm_tag_rcv().
> > It looks like only linux-4.9.y is affected. Sorry for not noticing this
> > earlier. Do you want me to submit a correcting patch?
>
> Yes please, that would make it easier for me.
And you already did that, thanks!