2022-08-02 21:48:04

by Andy Shevchenko

[permalink] [raw]
Subject: [PATCH net-next v1 1/1] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()

LED core provides a helper to parse default state from firmware node.
Use it instead of custom implementation.

Signed-off-by: Andy Shevchenko <[email protected]>
---
drivers/net/dsa/hirschmann/hellcreek_ptp.c | 45 ++++++++++++----------
1 file changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
index b28baab6d56a..793b2c296314 100644
--- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
+++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
@@ -297,7 +297,8 @@ static enum led_brightness hellcreek_led_is_gm_get(struct led_classdev *ldev)
static int hellcreek_led_setup(struct hellcreek *hellcreek)
{
struct device_node *leds, *led = NULL;
- const char *label, *state;
+ enum led_default_state state;
+ const char *label;
int ret = -EINVAL;

of_node_get(hellcreek->dev->of_node);
@@ -318,16 +319,17 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek)
ret = of_property_read_string(led, "label", &label);
hellcreek->led_sync_good.name = ret ? "sync_good" : label;

- ret = of_property_read_string(led, "default-state", &state);
- if (!ret) {
- if (!strcmp(state, "on"))
- hellcreek->led_sync_good.brightness = 1;
- else if (!strcmp(state, "off"))
- hellcreek->led_sync_good.brightness = 0;
- else if (!strcmp(state, "keep"))
- hellcreek->led_sync_good.brightness =
- hellcreek_get_brightness(hellcreek,
- STATUS_OUT_SYNC_GOOD);
+ state = led_init_default_state_get(of_fwnode_handle(led));
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ hellcreek->led_sync_good.brightness = 1;
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ hellcreek->led_sync_good.brightness =
+ hellcreek_get_brightness(hellcreek, STATUS_OUT_SYNC_GOOD);
+ break;
+ default:
+ hellcreek->led_sync_good.brightness = 0;
}

hellcreek->led_sync_good.max_brightness = 1;
@@ -344,16 +346,17 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek)
ret = of_property_read_string(led, "label", &label);
hellcreek->led_is_gm.name = ret ? "is_gm" : label;

- ret = of_property_read_string(led, "default-state", &state);
- if (!ret) {
- if (!strcmp(state, "on"))
- hellcreek->led_is_gm.brightness = 1;
- else if (!strcmp(state, "off"))
- hellcreek->led_is_gm.brightness = 0;
- else if (!strcmp(state, "keep"))
- hellcreek->led_is_gm.brightness =
- hellcreek_get_brightness(hellcreek,
- STATUS_OUT_IS_GM);
+ state = led_init_default_state_get(of_fwnode_handle(led));
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ hellcreek->led_is_gm.brightness = 1;
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ hellcreek->led_is_gm.brightness =
+ hellcreek_get_brightness(hellcreek, STATUS_OUT_IS_GM);
+ break;
+ default:
+ hellcreek->led_is_gm.brightness = 0;
}

hellcreek->led_is_gm.max_brightness = 1;
--
2.35.1



2022-08-03 05:40:16

by Kurt Kanzenbach

[permalink] [raw]
Subject: Re: [PATCH net-next v1 1/1] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()

On Wed Aug 03 2022, Andy Shevchenko wrote:
> LED core provides a helper to parse default state from firmware node.
> Use it instead of custom implementation.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
> ---
> drivers/net/dsa/hirschmann/hellcreek_ptp.c | 45 ++++++++++++----------
> 1 file changed, 24 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> index b28baab6d56a..793b2c296314 100644
> --- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> +++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> @@ -297,7 +297,8 @@ static enum led_brightness hellcreek_led_is_gm_get(struct led_classdev *ldev)
> static int hellcreek_led_setup(struct hellcreek *hellcreek)
> {
> struct device_node *leds, *led = NULL;
> - const char *label, *state;
> + enum led_default_state state;
> + const char *label;
> int ret = -EINVAL;
>
> of_node_get(hellcreek->dev->of_node);
> @@ -318,16 +319,17 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek)
> ret = of_property_read_string(led, "label", &label);
> hellcreek->led_sync_good.name = ret ? "sync_good" : label;
>
> - ret = of_property_read_string(led, "default-state", &state);
> - if (!ret) {
> - if (!strcmp(state, "on"))
> - hellcreek->led_sync_good.brightness = 1;
> - else if (!strcmp(state, "off"))
> - hellcreek->led_sync_good.brightness = 0;
> - else if (!strcmp(state, "keep"))
> - hellcreek->led_sync_good.brightness =
> - hellcreek_get_brightness(hellcreek,
> - STATUS_OUT_SYNC_GOOD);
> + state = led_init_default_state_get(of_fwnode_handle(led));

Applied your patch to net-next/master and this yields:

|drivers/net/dsa/hirschmann/hellcreek_ptp.c: In function ‘hellcreek_led_setup’:
|drivers/net/dsa/hirschmann/hellcreek_ptp.c:430:10: error: implicit declaration of function ‘led_init_default_state_get’; did you mean ‘led_get_default_pattern’? [-Werror=implicit-function-declaration]
| 430 | state = led_init_default_state_get(of_fwnode_handle(led));
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| | led_get_default_pattern

The header is missing:

|diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
|index df339f3e1803..430f39172d58 100644
|--- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
|+++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
|@@ -14,6 +14,8 @@
| #include "hellcreek_ptp.h"
| #include "hellcreek_hwtstamp.h"
|
|+#include "../../../leds/leds.h"
|+
| u16 hellcreek_ptp_read(struct hellcreek *hellcreek, unsigned int offset)
| {
| return readw(hellcreek->ptp_base + offset);

Maybe move led_init_default_state_get() to linux/leds.h?

Thanks,
Kurt


Attachments:
signature.asc (877.00 B)

2022-08-03 11:32:27

by Andy Shevchenko

[permalink] [raw]
Subject: Re: [PATCH net-next v1 1/1] net: dsa: hellcreek: Get rid of custom led_init_default_state_get()

On Wed, Aug 3, 2022 at 7:39 AM Kurt Kanzenbach <[email protected]> wrote:
>
> On Wed Aug 03 2022, Andy Shevchenko wrote:
> > LED core provides a helper to parse default state from firmware node.
> > Use it instead of custom implementation.
> >
> > Signed-off-by: Andy Shevchenko <[email protected]>
> > ---
> > drivers/net/dsa/hirschmann/hellcreek_ptp.c | 45 ++++++++++++----------
> > 1 file changed, 24 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> > index b28baab6d56a..793b2c296314 100644
> > --- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> > +++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> > @@ -297,7 +297,8 @@ static enum led_brightness hellcreek_led_is_gm_get(struct led_classdev *ldev)
> > static int hellcreek_led_setup(struct hellcreek *hellcreek)
> > {
> > struct device_node *leds, *led = NULL;
> > - const char *label, *state;
> > + enum led_default_state state;
> > + const char *label;
> > int ret = -EINVAL;
> >
> > of_node_get(hellcreek->dev->of_node);
> > @@ -318,16 +319,17 @@ static int hellcreek_led_setup(struct hellcreek *hellcreek)
> > ret = of_property_read_string(led, "label", &label);
> > hellcreek->led_sync_good.name = ret ? "sync_good" : label;
> >
> > - ret = of_property_read_string(led, "default-state", &state);
> > - if (!ret) {
> > - if (!strcmp(state, "on"))
> > - hellcreek->led_sync_good.brightness = 1;
> > - else if (!strcmp(state, "off"))
> > - hellcreek->led_sync_good.brightness = 0;
> > - else if (!strcmp(state, "keep"))
> > - hellcreek->led_sync_good.brightness =
> > - hellcreek_get_brightness(hellcreek,
> > - STATUS_OUT_SYNC_GOOD);
> > + state = led_init_default_state_get(of_fwnode_handle(led));
>
> Applied your patch to net-next/master and this yields:
>
> |drivers/net/dsa/hirschmann/hellcreek_ptp.c: In function ‘hellcreek_led_setup’:
> |drivers/net/dsa/hirschmann/hellcreek_ptp.c:430:10: error: implicit declaration of function ‘led_init_default_state_get’; did you mean ‘led_get_default_pattern’? [-Werror=implicit-function-declaration]
> | 430 | state = led_init_default_state_get(of_fwnode_handle(led));
> | | ^~~~~~~~~~~~~~~~~~~~~~~~~~
> | | led_get_default_pattern
>
> The header is missing:
>
> |diff --git a/drivers/net/dsa/hirschmann/hellcreek_ptp.c b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> |index df339f3e1803..430f39172d58 100644
> |--- a/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> |+++ b/drivers/net/dsa/hirschmann/hellcreek_ptp.c
> |@@ -14,6 +14,8 @@
> | #include "hellcreek_ptp.h"
> | #include "hellcreek_hwtstamp.h"
> |
> |+#include "../../../leds/leds.h"
> |+
> | u16 hellcreek_ptp_read(struct hellcreek *hellcreek, unsigned int offset)
> | {
> | return readw(hellcreek->ptp_base + offset);
>
> Maybe move led_init_default_state_get() to linux/leds.h?

Yep, thanks! Missed patch and all of them should be sent as a series...


--
With Best Regards,
Andy Shevchenko