2009-07-09 21:10:26

by Stephen Hemminger

[permalink] [raw]
Subject: Clock incorrect on 2.6.31-rc2

My system (desktop Ubuntu 9.0) runs fine with 2.6.30, but with 2.6.31-rc2 it does
not keep time correctly. Also ntptime reports an error.

$ ntptime
ntp_gettime() returns code 5 (ERROR)
time ce00daf1.8e997000 Thu, Jul 9 2009 14:09:05.557, (.557029),
maximum error 25016 us, estimated error 16 us
ntp_adjtime() returns code 5 (ERROR)
modes 0x0 (),
offset 0.000 us, frequency 7.827 ppm, interval 1 s,
maximum error 25016 us, estimated error 16 us,
status 0x40 (UNSYNC),
time constant 4, precision 1.000 us, tolerance 500 ppm,

Config is:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc2
# Mon Jul 6 21:21:43 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_IBS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_CLOCK is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_NEW_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_CPU_DEBUG=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_ASK_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE=y
# CONFIG_IP_FIB_HASH is not set
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_DELL_LAPTOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_SCH=m
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
CONFIG_IGB=m
CONFIG_IGB_DCA=y
# CONFIG_IGBVF is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_CNIC is not set
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
CONFIG_JME=m
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LM95241=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=m
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_M66592 is not set
CONFIG_USB_GADGET_AMD5536UDC=y
CONFIG_USB_AMD5536UDC=m
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD64 is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
# CONFIG_RTC_DRV_DS1390 is not set
CONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=m
# CONFIG_RTC_DRV_DS3234 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y


2009-07-09 21:45:50

by Thomas Gleixner

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Thu, 9 Jul 2009, Stephen Hemminger wrote:

NTP expert CC'ed

> My system (desktop Ubuntu 9.0) runs fine with 2.6.30, but with 2.6.31-rc2 it does
> not keep time correctly. Also ntptime reports an error.
>
> $ ntptime
> ntp_gettime() returns code 5 (ERROR)
> time ce00daf1.8e997000 Thu, Jul 9 2009 14:09:05.557, (.557029),
> maximum error 25016 us, estimated error 16 us
> ntp_adjtime() returns code 5 (ERROR)
> modes 0x0 (),
> offset 0.000 us, frequency 7.827 ppm, interval 1 s,
> maximum error 25016 us, estimated error 16 us,
> status 0x40 (UNSYNC),
> time constant 4, precision 1.000 us, tolerance 500 ppm,

2009-07-09 21:58:47

by john stultz

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Thu, Jul 9, 2009 at 2:10 PM, Stephen Hemminger<[email protected]> wrote:
> My system (desktop Ubuntu 9.0) runs fine with 2.6.30, but with 2.6.31-rc2 it does
> not keep time correctly. Also ntptime reports an error.

Can you better describe how it does not keep time? Is time moving too
slow? too fast?

Could you include output from the following commands with 2.6.31-rc2
(and 2.6.30 if you have the time).
$ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
$ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
$ dmesg
$ ntpdc -c peers
$ ntpdc -c kerninfo

> $ ntptime
> ntp_gettime() returns code 5 (ERROR)
> ?time ce00daf1.8e997000 ?Thu, Jul ?9 2009 14:09:05.557, (.557029),
> ?maximum error 25016 us, estimated error 16 us
> ntp_adjtime() returns code 5 (ERROR)
> ?modes 0x0 (),
> ?offset 0.000 us, frequency 7.827 ppm, interval 1 s,
> ?maximum error 25016 us, estimated error 16 us,
> ?status 0x40 (UNSYNC),
> ?time constant 4, precision 1.000 us, tolerance 500 ppm,

The error above just comes from NTP not being in sync.

thanks
-john

2009-07-09 22:39:18

by Stephen Hemminger

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Thu, 9 Jul 2009 14:58:37 -0700
john stultz <[email protected]> wrote:

> On Thu, Jul 9, 2009 at 2:10 PM, Stephen Hemminger<[email protected]> wrote:
> > My system (desktop Ubuntu 9.0) runs fine with 2.6.30, but with 2.6.31-rc2 it does
> > not keep time correctly. Also ntptime reports an error.
>
> Can you better describe how it does not keep time? Is time moving too
> slow? too fast?

The clock just seemed to stop, or be wildly stuck in past.


>
> Could you include output from the following commands with 2.6.31-rc2
> (and 2.6.30 if you have the time).
> $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> $ dmesg
> $ ntpdc -c peers
> $ ntpdc -c kerninfo

$ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
tsc hpet acpi_pm
$ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
tsc

# ntpdc -c peers
remote local st poll reach delay offset disp
=======================================================================
*ussprometheus.r 192.168.1.3 2 128 377 0.09094 0.007730 0.06786

# ntpdc -c kerninfo
pll offset: 0.005107 s
pll frequency: 155.028 ppm
maximum error: 0.219122 s
estimated error: 0.007209 s
status: 0001 pll
pll time constant: 7
precision: 1e-06 s
frequency tolerance: 500 ppm


$ dmesg
[ 0.000000] Linux version 2.6.31-rc2 (shemminger@nehalam) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #149 SMP Tue Jul 7 18:22:50 PDT 2009
[ 0.000000] Command line: root=/dev/sda1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask E00000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[ 0.000000] 0100000000 - 01c0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1c0000000 @ 13000-1b000
[ 0.000000] RAMDISK: 36c2e000 - 37fefab2
[ 0.000000] ACPI: RSDP 00000000000fb320 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00044 (v01 121808 RSDT1124 20081218 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 121808 FACP1124 20081218 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0B181 (v01 A1087 A1087001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 121808 APIC1124 20081218 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 121808 OEMMCFG 20081218 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 121808 OEMB1124 20081218 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 121808 OEMHPET 20081218 MSFT 00000097)
[ 0.000000] ACPI: DMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 121808 OEMOSFR 20081218 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79aa30 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001c0000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [0000000000016000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000051fff] pages 38
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 01c0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001681e90] TEXT DATA BSS ==> [0001000000 - 0001681e90]
[ 0.000000] #3 [0036c2e000 - 0037fefab2] RAMDISK ==> [0036c2e000 - 0037fefab2]
[ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
[ 0.000000] #5 [0001682000 - 0001682290] BRK ==> [0001682000 - 0001682290]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000016000] PGTABLE ==> [0000013000 - 0000016000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff880028600000-ffff88002e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] On node 0 totalpages: 1570571
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 109 pages reserved
[ 0.000000] DMA zone: 3806 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 763840 pages, LIFO batch:31
[ 0.000000] Normal zone: 12288 pages used for memmap
[ 0.000000] Normal zone: 774144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf798000
[ 0.000000] PM: Registered nosave memory: 00000000bf798000 - 00000000bf7dc000
[ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028054000, static data 75872 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1541790
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 6089856k/7340032k available (3252k kernel code, 1057748k absent, 192428k reserved, 2135k data, 496k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] NR_IRQS:512
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2673.143 MHz processor.
[ 0.003787] Console: colour VGA+ 80x25
[ 0.003788] console [tty0] enabled
[ 0.019748] hpet clockevent registered
[ 0.019751] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.019889] Calibrating delay loop (skipped), value calculated using timer frequency.. 5346.28 BogoMIPS (lpj=2673143)
[ 0.020165] Security Framework initialized
[ 0.020296] SELinux: Disabled at boot.
[ 0.020835] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022505] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023266] Mount-cache hash table entries: 256
[ 0.023496] CPU: Physical Processor ID: 0
[ 0.023626] CPU: Processor Core ID: 0
[ 0.023764] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.023921] CPU: L2 cache: 256K
[ 0.024050] CPU: L3 cache: 8192K
[ 0.024179] CPU 0/0x0 -> Node 0
[ 0.024308] mce: CPU supports 9 MCE banks
[ 0.024444] CPU0: Thermal monitoring enabled (TM1)
[ 0.024577] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.024878] using mwait in idle threads.
[ 0.025019] ACPI: Core revision 20090521
[ 0.176199] Setting APIC routing to flat
[ 0.176774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.186909] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.288738] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.299129] Initializing CPU#1
[ 0.359628] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.359633] CPU: Physical Processor ID: 0
[ 0.359634] CPU: Processor Core ID: 1
[ 0.359635] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.359637] CPU: L2 cache: 256K
[ 0.359637] CPU: L3 cache: 8192K
[ 0.359639] CPU 1/0x2 -> Node 0
[ 0.359641] mce: CPU supports 9 MCE banks
[ 0.359648] CPU1: Thermal monitoring enabled (TM1)
[ 0.359651] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.360205] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.360686] CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.365442] Skipping synchronization checks as TSC is reliable.
[ 0.365627] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.376116] Initializing CPU#2
[ 0.436590] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672339)
[ 0.436595] CPU: Physical Processor ID: 0
[ 0.436596] CPU: Processor Core ID: 2
[ 0.436598] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.436599] CPU: L2 cache: 256K
[ 0.436600] CPU: L3 cache: 8192K
[ 0.436601] CPU 2/0x4 -> Node 0
[ 0.436603] mce: CPU supports 9 MCE banks
[ 0.436611] CPU2: Thermal monitoring enabled (TM1)
[ 0.436613] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.437168] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.437676] CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.439521] Skipping synchronization checks as TSC is reliable.
[ 0.439708] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.450195] Initializing CPU#3
[ 0.510554] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672336)
[ 0.510559] CPU: Physical Processor ID: 0
[ 0.510560] CPU: Processor Core ID: 3
[ 0.510562] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.510563] CPU: L2 cache: 256K
[ 0.510564] CPU: L3 cache: 8192K
[ 0.510565] CPU 3/0x6 -> Node 0
[ 0.510567] mce: CPU supports 9 MCE banks
[ 0.510575] CPU3: Thermal monitoring enabled (TM1)
[ 0.510577] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.511132] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.511661] CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.516579] Skipping synchronization checks as TSC is reliable.
[ 0.516761] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.527249] Initializing CPU#4
[ 0.587516] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672335)
[ 0.587522] CPU: Physical Processor ID: 0
[ 0.587523] CPU: Processor Core ID: 0
[ 0.587525] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.587527] CPU: L2 cache: 256K
[ 0.587528] CPU: L3 cache: 8192K
[ 0.587530] CPU 4/0x1 -> Node 0
[ 0.587532] mce: CPU supports 9 MCE banks
[ 0.587540] CPU4: Thermal monitoring enabled (TM1)
[ 0.587542] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.588201] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.588929] CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.590777] Skipping synchronization checks as TSC is reliable.
[ 0.590964] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.601451] Initializing CPU#5
[ 0.663480] Calibrating delay using timer specific routine.. 5558.45 BogoMIPS (lpj=2779229)
[ 0.663486] CPU: Physical Processor ID: 0
[ 0.663487] CPU: Processor Core ID: 1
[ 0.663488] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.663490] CPU: L2 cache: 256K
[ 0.663490] CPU: L3 cache: 8192K
[ 0.663492] CPU 5/0x3 -> Node 0
[ 0.663494] mce: CPU supports 9 MCE banks
[ 0.663501] CPU5: Thermal monitoring enabled (TM1)
[ 0.663504] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.664207] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.664919] CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.666764] Skipping synchronization checks as TSC is reliable.
[ 0.666947] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.677434] Initializing CPU#6
[ 0.737443] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.737448] CPU: Physical Processor ID: 0
[ 0.737449] CPU: Processor Core ID: 2
[ 0.737450] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.737451] CPU: L2 cache: 256K
[ 0.737452] CPU: L3 cache: 8192K
[ 0.737454] CPU 6/0x5 -> Node 0
[ 0.737456] mce: CPU supports 9 MCE banks
[ 0.737463] CPU6: Thermal monitoring enabled (TM1)
[ 0.737465] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.738168] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.738895] CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.740740] Skipping synchronization checks as TSC is reliable.
[ 0.740922] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.751410] Initializing CPU#7
[ 0.811406] Calibrating delay using timer specific routine.. 5344.67 BogoMIPS (lpj=2672337)
[ 0.811412] CPU: Physical Processor ID: 0
[ 0.811412] CPU: Processor Core ID: 3
[ 0.811414] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.811415] CPU: L2 cache: 256K
[ 0.811416] CPU: L3 cache: 8192K
[ 0.811418] CPU 7/0x7 -> Node 0
[ 0.811420] mce: CPU supports 9 MCE banks
[ 0.811427] CPU7: Thermal monitoring enabled (TM1)
[ 0.811429] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.812131] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.812872] CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.814717] Skipping synchronization checks as TSC is reliable.
[ 0.814857] Brought up 8 CPUs
[ 0.814986] Total of 8 processors activated (42972.78 BogoMIPS).
[ 0.815561] NET: Registered protocol family 16
[ 0.815926] ACPI: bus type pci registered
[ 0.816146] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.816282] PCI: Not using MMCONFIG.
[ 0.816413] PCI: Using configuration type 1 for base access
[ 0.818061] bio: create slab <bio-0> at 0
[ 0.818962] ACPI: EC: Look up EC in DSDT
[ 0.854058] ACPI: Interpreter enabled
[ 0.854190] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.854476] ACPI: Using IOAPIC for interrupt routing
[ 0.854654] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.856873] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.863205] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.871465] ACPI Warning: Incorrect checksum in table [OEMB] - 7C, should be 74 20090521 tbutils-246
[ 0.871895] ACPI: No dock devices found.
[ 0.872151] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.872365] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.872503] pci 0000:00:00.0: PME# disabled
[ 0.875629] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.875765] pci 0000:00:01.0: PME# disabled
[ 0.875947] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.876081] pci 0000:00:03.0: PME# disabled
[ 0.876269] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.876405] pci 0000:00:07.0: PME# disabled
[ 0.876645] pci 0000:00:13.0: reg 10 32bit mmio: [0xfec8a000-0xfec8afff]
[ 0.876673] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.876808] pci 0000:00:13.0: PME# disabled
[ 0.877140] pci 0000:00:1a.0: reg 20 io port: [0x6800-0x681f]
[ 0.877201] pci 0000:00:1a.1: reg 20 io port: [0x6880-0x689f]
[ 0.877263] pci 0000:00:1a.2: reg 20 io port: [0x6c00-0x6c1f]
[ 0.877331] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfadff000-0xfadff3ff]
[ 0.877381] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.877518] pci 0000:00:1a.7: PME# disabled
[ 0.877683] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfadf8000-0xfadfbfff]
[ 0.877720] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.877856] pci 0000:00:1b.0: PME# disabled
[ 0.878036] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.878171] pci 0000:00:1c.0: PME# disabled
[ 0.878354] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.878490] pci 0000:00:1c.2: PME# disabled
[ 0.878672] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.878808] pci 0000:00:1c.3: PME# disabled
[ 0.878991] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.879126] pci 0000:00:1c.4: PME# disabled
[ 0.879308] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.879444] pci 0000:00:1c.5: PME# disabled
[ 0.879622] pci 0000:00:1d.0: reg 20 io port: [0x6080-0x609f]
[ 0.879684] pci 0000:00:1d.1: reg 20 io port: [0x6400-0x641f]
[ 0.879746] pci 0000:00:1d.2: reg 20 io port: [0x6480-0x649f]
[ 0.879812] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfadfe000-0xfadfe3ff]
[ 0.879862] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.879997] pci 0000:00:1d.7: PME# disabled
[ 0.880235] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.880470] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.880607] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.880842] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
[ 0.881120] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.881125] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.881130] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.881135] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.881140] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f]
[ 0.881144] pci 0000:00:1f.2: reg 24 io port: [0xffa0-0xffaf]
[ 0.881185] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfadfd000-0xfadfd0ff]
[ 0.881197] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.881235] pci 0000:00:1f.5: reg 10 io port: [0x6000-0x6007]
[ 0.881240] pci 0000:00:1f.5: reg 14 io port: [0x5c00-0x5c03]
[ 0.881245] pci 0000:00:1f.5: reg 18 io port: [0x5880-0x5887]
[ 0.881250] pci 0000:00:1f.5: reg 1c io port: [0x5800-0x5803]
[ 0.881254] pci 0000:00:1f.5: reg 20 io port: [0x5480-0x548f]
[ 0.881259] pci 0000:00:1f.5: reg 24 io port: [0x5400-0x540f]
[ 0.881338] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.881475] pci 0000:01:00.0: PME# disabled
[ 0.883457] pci 0000:00:01.0: bridge io port: [0x7000-0x8fff]
[ 0.883464] pci 0000:00:01.0: bridge 32bit mmio: [0xfae00000-0xfb8fffff]
[ 0.883522] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.883658] pci 0000:02:02.0: PME# disabled
[ 0.883849] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.883985] pci 0000:02:04.0: PME# disabled
[ 0.884156] pci 0000:01:00.0: bridge io port: [0x7000-0x8fff]
[ 0.884160] pci 0000:01:00.0: bridge 32bit mmio: [0xfae00000-0xfb8fffff]
[ 0.884211] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb3a0000-0xfb3bffff]
[ 0.884218] pci 0000:03:00.0: reg 14 32bit mmio: [0xfae00000-0xfaffffff]
[ 0.884225] pci 0000:03:00.0: reg 18 io port: [0x7880-0x789f]
[ 0.884232] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb3d8000-0xfb3dbfff]
[ 0.884342] pci 0000:03:00.1: reg 10 32bit mmio: [0xfb3e0000-0xfb3fffff]
[ 0.884349] pci 0000:03:00.1: reg 14 32bit mmio: [0xfb000000-0xfb1fffff]
[ 0.884356] pci 0000:03:00.1: reg 18 io port: [0x7c00-0x7c1f]
[ 0.884363] pci 0000:03:00.1: reg 1c 32bit mmio: [0xfb3dc000-0xfb3dffff]
[ 0.886478] pci 0000:02:02.0: bridge io port: [0x7000-0x7fff]
[ 0.886482] pci 0000:02:02.0: bridge 32bit mmio: [0xfae00000-0xfb3fffff]
[ 0.886536] pci 0000:04:00.0: reg 10 32bit mmio: [0xfb8a0000-0xfb8bffff]
[ 0.886543] pci 0000:04:00.0: reg 14 32bit mmio: [0xfb400000-0xfb5fffff]
[ 0.886550] pci 0000:04:00.0: reg 18 io port: [0x8880-0x889f]
[ 0.886557] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb8d8000-0xfb8dbfff]
[ 0.886668] pci 0000:04:00.1: reg 10 32bit mmio: [0xfb8e0000-0xfb8fffff]
[ 0.886675] pci 0000:04:00.1: reg 14 32bit mmio: [0xfb600000-0xfb7fffff]
[ 0.886682] pci 0000:04:00.1: reg 18 io port: [0x8c00-0x8c1f]
[ 0.886689] pci 0000:04:00.1: reg 1c 32bit mmio: [0xfb8dc000-0xfb8dffff]
[ 0.888482] pci 0000:02:04.0: bridge io port: [0x8000-0x8fff]
[ 0.888485] pci 0000:02:04.0: bridge 32bit mmio: [0xfb400000-0xfb8fffff]
[ 0.888532] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.888539] pci 0000:05:00.0: reg 18 64bit mmio: [0xfb9e0000-0xfb9effff]
[ 0.888544] pci 0000:05:00.0: reg 20 io port: [0x9000-0x90ff]
[ 0.888551] pci 0000:05:00.0: reg 30 32bit mmio: [0xfb9c0000-0xfb9dffff]
[ 0.888567] pci 0000:05:00.0: supports D1 D2
[ 0.888594] pci 0000:05:00.1: reg 10 64bit mmio: [0xfb9f0000-0xfb9fffff]
[ 0.888622] pci 0000:05:00.1: supports D1 D2
[ 0.888638] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.888913] pci 0000:00:03.0: bridge io port: [0x9000-0x9fff]
[ 0.888916] pci 0000:00:03.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
[ 0.888920] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.888985] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf9f00000-0xf9ffffff]
[ 0.889040] pci 0000:0a:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff]
[ 0.889047] pci 0000:0a:00.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.889071] pci 0000:0a:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff]
[ 0.889109] pci 0000:0a:00.0: supports D1 D2
[ 0.889110] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.889248] pci 0000:0a:00.0: PME# disabled
[ 0.891496] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.891500] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 0.891556] pci 0000:09:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.891574] pci 0000:09:00.0: reg 20 64bit mmio: [0xfbcff000-0xfbcfffff]
[ 0.891582] pci 0000:09:00.0: reg 30 32bit mmio: [0xfbc80000-0xfbcbffff]
[ 0.891613] pci 0000:09:00.0: supports D1
[ 0.891614] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.891750] pci 0000:09:00.0: PME# disabled
[ 0.891905] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.892198] pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
[ 0.892201] pci 0000:00:1c.3: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
[ 0.892246] pci 0000:08:00.0: reg 10 io port: [0xbc00-0xbc07]
[ 0.892253] pci 0000:08:00.0: reg 14 io port: [0xb880-0xb883]
[ 0.892260] pci 0000:08:00.0: reg 18 io port: [0xb800-0xb807]
[ 0.892267] pci 0000:08:00.0: reg 1c io port: [0xb480-0xb483]
[ 0.892274] pci 0000:08:00.0: reg 20 io port: [0xb400-0xb40f]
[ 0.892281] pci 0000:08:00.0: reg 24 32bit mmio: [0xfbbffc00-0xfbbfffff]
[ 0.892319] pci 0000:08:00.0: supports D1
[ 0.892320] pci 0000:08:00.0: PME# supported from D0 D1 D3hot
[ 0.892457] pci 0000:08:00.0: PME# disabled
[ 0.892612] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.892905] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]
[ 0.892909] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
[ 0.892966] pci 0000:07:00.0: reg 10 64bit mmio: [0xfbafc000-0xfbafffff]
[ 0.892974] pci 0000:07:00.0: reg 18 io port: [0xa800-0xa8ff]
[ 0.892998] pci 0000:07:00.0: reg 30 32bit mmio: [0xfbac0000-0xfbadffff]
[ 0.893035] pci 0000:07:00.0: supports D1 D2
[ 0.893036] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.893173] pci 0000:07:00.0: PME# disabled
[ 0.894497] pci 0000:00:1c.5: bridge io port: [0xa000-0xafff]
[ 0.894501] pci 0000:00:1c.5: bridge 32bit mmio: [0xfba00000-0xfbafffff]
[ 0.894538] pci 0000:0c:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff]
[ 0.894544] pci 0000:0c:02.0: reg 14 io port: [0xec00-0xec7f]
[ 0.894584] pci 0000:0c:02.0: supports D2
[ 0.894585] pci 0000:0c:02.0: PME# supported from D2 D3hot D3cold
[ 0.894721] pci 0000:0c:02.0: PME# disabled
[ 0.894890] pci 0000:00:1e.0: transparent bridge
[ 0.895023] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.895026] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.895067] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.895367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.895471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.895525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.895575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.895624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.895674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.895723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.895773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.895823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 0.923077] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.923606] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.923916] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.924443] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.924969] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.925494] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.926017] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 0.926542] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.927160] SCSI subsystem initialized
[ 0.927360] libata version 3.00 loaded.
[ 0.927420] usbcore: registered new interface driver usbfs
[ 0.927574] usbcore: registered new interface driver hub
[ 0.927730] usbcore: registered new device driver usb
[ 0.927972] PCI: Using ACPI for IRQ routing
[ 0.932441] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.932711] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.939410] Switched to high resolution mode on CPU 0
[ 0.939449] Switched to high resolution mode on CPU 1
[ 0.939452] Switched to high resolution mode on CPU 3
[ 0.939455] Switched to high resolution mode on CPU 2
[ 0.939742] Switched to high resolution mode on CPU 4
[ 0.939799] Switched to high resolution mode on CPU 7
[ 0.939800] Switched to high resolution mode on CPU 6
[ 0.939804] Switched to high resolution mode on CPU 5
[ 0.942413] pnp: PnP ACPI init
[ 0.942553] ACPI: bus type pnp registered
[ 0.945432] pnp: PnP ACPI: found 15 devices
[ 0.945563] ACPI: ACPI bus type pnp unregistered
[ 0.945701] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 0.945837] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 0.945973] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 0.946109] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 0.946248] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.946384] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.946520] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.946655] system 00:08: ioport range 0x500-0x57f could not be reserved
[ 0.946792] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.946928] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.947064] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.947202] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.950415] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.950552] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.950694] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.950833] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.950969] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.951105] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.951241] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.951478] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.956557] pci 0000:02:02.0: PCI bridge, secondary bus 0000:03
[ 0.956693] pci 0000:02:02.0: IO window: 0x7000-0x7fff
[ 0.956829] pci 0000:02:02.0: MEM window: 0xfae00000-0xfb3fffff
[ 0.956965] pci 0000:02:02.0: PREFETCH window: disabled
[ 0.957099] pci 0000:02:04.0: PCI bridge, secondary bus 0000:04
[ 0.957234] pci 0000:02:04.0: IO window: 0x8000-0x8fff
[ 0.957370] pci 0000:02:04.0: MEM window: 0xfb400000-0xfb8fffff
[ 0.957507] pci 0000:02:04.0: PREFETCH window: disabled
[ 0.957641] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
[ 0.957776] pci 0000:01:00.0: IO window: 0x7000-0x8fff
[ 0.957912] pci 0000:01:00.0: MEM window: 0xfae00000-0xfb8fffff
[ 0.958047] pci 0000:01:00.0: PREFETCH window: disabled
[ 0.958182] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.958316] pci 0000:00:01.0: IO window: 0x7000-0x8fff
[ 0.958451] pci 0000:00:01.0: MEM window: 0xfae00000-0xfb8fffff
[ 0.958586] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.958721] pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
[ 0.958855] pci 0000:00:03.0: IO window: 0x9000-0x9fff
[ 0.958990] pci 0000:00:03.0: MEM window: 0xfb900000-0xfb9fffff
[ 0.959125] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.959360] pci 0000:00:07.0: PCI bridge, secondary bus 0000:06
[ 0.959494] pci 0000:00:07.0: IO window: disabled
[ 0.959627] pci 0000:00:07.0: MEM window: disabled
[ 0.959760] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.959894] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.960027] pci 0000:00:1c.0: IO window: disabled
[ 0.960161] pci 0000:00:1c.0: MEM window: disabled
[ 0.960294] pci 0000:00:1c.0: PREFETCH window: 0x000000f9f00000-0x000000f9ffffff
[ 0.960531] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0a
[ 0.960665] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.960800] pci 0000:00:1c.2: MEM window: 0xfbd00000-0xfbdfffff
[ 0.960935] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.961069] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09
[ 0.961203] pci 0000:00:1c.3: IO window: 0xc000-0xcfff
[ 0.961338] pci 0000:00:1c.3: MEM window: 0xfbc00000-0xfbcfffff
[ 0.961474] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.961608] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
[ 0.961743] pci 0000:00:1c.4: IO window: 0xb000-0xbfff
[ 0.961877] pci 0000:00:1c.4: MEM window: 0xfbb00000-0xfbbfffff
[ 0.962012] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.962146] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 0.962280] pci 0000:00:1c.5: IO window: 0xa000-0xafff
[ 0.962416] pci 0000:00:1c.5: MEM window: 0xfba00000-0xfbafffff
[ 0.962551] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.962686] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[ 0.962820] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.962954] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.963089] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.963228] pci 0000:00:01.0: setting latency timer to 64
[ 0.963237] pci 0000:01:00.0: setting latency timer to 64
[ 0.963245] pci 0000:02:02.0: setting latency timer to 64
[ 0.963254] pci 0000:02:04.0: setting latency timer to 64
[ 0.963260] pci 0000:00:03.0: setting latency timer to 64
[ 0.963266] pci 0000:00:07.0: setting latency timer to 64
[ 0.963274] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.963412] pci 0000:00:1c.0: setting latency timer to 64
[ 0.963419] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.963556] pci 0000:00:1c.2: setting latency timer to 64
[ 0.963563] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.963700] pci 0000:00:1c.3: setting latency timer to 64
[ 0.963706] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.963843] pci 0000:00:1c.4: setting latency timer to 64
[ 0.963850] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.963987] pci 0000:00:1c.5: setting latency timer to 64
[ 0.963992] pci 0000:00:1e.0: setting latency timer to 64
[ 0.963995] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.963997] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.963999] pci_bus 0000:01: resource 0 io: [0x7000-0x8fff]
[ 0.964000] pci_bus 0000:01: resource 1 mem: [0xfae00000-0xfb8fffff]
[ 0.964002] pci_bus 0000:02: resource 0 io: [0x7000-0x8fff]
[ 0.964004] pci_bus 0000:02: resource 1 mem: [0xfae00000-0xfb8fffff]
[ 0.964006] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff]
[ 0.964007] pci_bus 0000:03: resource 1 mem: [0xfae00000-0xfb3fffff]
[ 0.964009] pci_bus 0000:04: resource 0 io: [0x8000-0x8fff]
[ 0.964011] pci_bus 0000:04: resource 1 mem: [0xfb400000-0xfb8fffff]
[ 0.964012] pci_bus 0000:05: resource 0 io: [0x9000-0x9fff]
[ 0.964014] pci_bus 0000:05: resource 1 mem: [0xfb900000-0xfb9fffff]
[ 0.964016] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.964018] pci_bus 0000:0b: resource 2 pref mem [0xf9f00000-0xf9ffffff]
[ 0.964019] pci_bus 0000:0a: resource 0 io: [0xd000-0xdfff]
[ 0.964021] pci_bus 0000:0a: resource 1 mem: [0xfbd00000-0xfbdfffff]
[ 0.964023] pci_bus 0000:09: resource 0 io: [0xc000-0xcfff]
[ 0.964024] pci_bus 0000:09: resource 1 mem: [0xfbc00000-0xfbcfffff]
[ 0.964026] pci_bus 0000:08: resource 0 io: [0xb000-0xbfff]
[ 0.964028] pci_bus 0000:08: resource 1 mem: [0xfbb00000-0xfbbfffff]
[ 0.964029] pci_bus 0000:07: resource 0 io: [0xa000-0xafff]
[ 0.964031] pci_bus 0000:07: resource 1 mem: [0xfba00000-0xfbafffff]
[ 0.964033] pci_bus 0000:0c: resource 0 io: [0xe000-0xefff]
[ 0.964034] pci_bus 0000:0c: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.964036] pci_bus 0000:0c: resource 3 io: [0x00-0xffff]
[ 0.964038] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.964059] NET: Registered protocol family 2
[ 0.964347] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.965314] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.966822] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.967387] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.967525] TCP reno registered
[ 0.967733] NET: Registered protocol family 1
[ 0.967897] Trying to unpack rootfs image as initramfs...
[ 1.371398] Freeing initrd memory: 20230k freed
[ 1.375558] audit: initializing netlink socket (disabled)
[ 1.375700] type=2000 audit(1247173664.089:1): initialized
[ 1.382005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.384290] msgmni has been set to 11933
[ 1.387695] alg: No test for stdrng (krng)
[ 1.387833] io scheduler noop registered
[ 1.387963] io scheduler anticipatory registered
[ 1.388094] io scheduler deadline registered
[ 1.388273] io scheduler cfq registered (default)
[ 1.388546] pci 0000:03:00.0: Disabling L0s
[ 1.388678] pci 0000:03:00.1: Disabling L0s
[ 1.388809] pci 0000:04:00.0: Disabling L0s
[ 1.388941] pci 0000:04:00.1: Disabling L0s
[ 1.389074] pci 0000:05:00.0: Boot video device
[ 1.389221] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.389228] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.389364] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.389369] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.389501] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.389506] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.389632] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.389638] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.389786] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.389792] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.389941] pcieport-driver 0000:00:1c.3: irq 53 for MSI/MSI-X
[ 1.389948] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.390092] pcieport-driver 0000:00:1c.4: irq 54 for MSI/MSI-X
[ 1.390099] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.390244] pcieport-driver 0000:00:1c.5: irq 55 for MSI/MSI-X
[ 1.390251] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.390394] pcieport-driver 0000:01:00.0: setting latency timer to 64
[ 1.390523] pcieport-driver 0000:02:02.0: irq 56 for MSI/MSI-X
[ 1.390532] pcieport-driver 0000:02:02.0: setting latency timer to 64
[ 1.390679] pcieport-driver 0000:02:04.0: irq 57 for MSI/MSI-X
[ 1.390687] pcieport-driver 0000:02:04.0: setting latency timer to 64
[ 1.390814] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390820] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390824] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390829] aer 0000:02:02.0:pcie22: AER service couldn't init device: no _OSC support
[ 1.390833] aer 0000:02:04.0:pcie22: AER service couldn't init device: no _OSC support
[ 1.391067] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.391302] ACPI: Power Button [PWRF]
[ 1.391492] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.391727] ACPI: Power Button [PWRB]
[ 1.392350] ACPI: SSDT 00000000bf798200 00403 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.393045] ACPI: SSDT 00000000bf79a280 003B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 1.393625] Monitor-Mwait will be used to enter C-1 state
[ 1.393639] Monitor-Mwait will be used to enter C-2 state
[ 1.393650] Monitor-Mwait will be used to enter C-3 state
[ 1.393679] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.393946] processor LNXCPU:00: registered as cooling_device0
[ 1.394504] ACPI: SSDT 00000000bf798610 00403 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
[ 1.395132] ACPI: SSDT 00000000bf79a640 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
[ 1.395784] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.396046] processor LNXCPU:01: registered as cooling_device1
[ 1.396597] ACPI: SSDT 00000000bf798a20 00403 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
[ 1.397231] ACPI: SSDT 00000000bf79a6d0 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
[ 1.397884] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 1.398146] processor LNXCPU:02: registered as cooling_device2
[ 1.398706] ACPI: SSDT 00000000bf798e30 00403 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
[ 1.399343] ACPI: SSDT 00000000bf79a760 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
[ 1.399993] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 1.400256] processor LNXCPU:03: registered as cooling_device3
[ 1.400817] ACPI: SSDT 00000000bf799240 00403 (v01 DpgPmm P005Ist 00000012 INTL 20060113)
[ 1.401458] ACPI: SSDT 00000000bf79a7f0 00085 (v01 PmRef P005Cst 00003000 INTL 20060113)
[ 1.402115] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
[ 1.402380] processor LNXCPU:04: registered as cooling_device4
[ 1.402932] ACPI: SSDT 00000000bf799650 00403 (v01 DpgPmm P006Ist 00000012 INTL 20060113)
[ 1.403575] ACPI: SSDT 00000000bf79a880 00085 (v01 PmRef P006Cst 00003000 INTL 20060113)
[ 1.404223] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
[ 1.404490] processor LNXCPU:05: registered as cooling_device5
[ 1.405052] ACPI: SSDT 00000000bf799a60 00403 (v01 DpgPmm P007Ist 00000012 INTL 20060113)
[ 1.405697] ACPI: SSDT 00000000bf79a910 00085 (v01 PmRef P007Cst 00003000 INTL 20060113)
[ 1.406345] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
[ 1.406609] processor LNXCPU:06: registered as cooling_device6
[ 1.407167] ACPI: SSDT 00000000bf799e70 00403 (v01 DpgPmm P008Ist 00000012 INTL 20060113)
[ 1.407807] ACPI: SSDT 00000000bf79a9a0 00085 (v01 PmRef P008Cst 00003000 INTL 20060113)
[ 1.408459] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
[ 1.408723] processor LNXCPU:07: registered as cooling_device7
[ 1.429222] Linux agpgart interface v0.103
[ 1.429379] [drm] Initialized drm 1.1.0 20060810
[ 1.429511] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.429859] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 1.431349] brd: module loaded
[ 1.431646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.431804] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.431954] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.431957] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.432134] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.436266] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.436402] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.436413] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfadff000
[ 1.446319] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.446525] usb usb1: configuration #1 chosen from 1 choice
[ 1.446691] hub 1-0:1.0: USB hub found
[ 1.446823] hub 1-0:1.0: 6 ports detected
[ 1.447011] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.447154] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.447156] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.447333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.451459] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.451593] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.451603] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfadfe000
[ 1.461316] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.461516] usb usb2: configuration #1 chosen from 1 choice
[ 1.461680] hub 2-0:1.0: USB hub found
[ 1.461812] hub 2-0:1.0: 6 ports detected
[ 1.462000] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.462156] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.462295] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.462297] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.462472] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.462731] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00006800
[ 1.462937] usb usb3: configuration #1 chosen from 1 choice
[ 1.463100] hub 3-0:1.0: USB hub found
[ 1.463232] hub 3-0:1.0: 2 ports detected
[ 1.463412] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.466624] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.466627] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.466805] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.467062] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006880
[ 1.467268] usb usb4: configuration #1 chosen from 1 choice
[ 1.467438] hub 4-0:1.0: USB hub found
[ 1.467570] hub 4-0:1.0: 2 ports detected
[ 1.467747] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.467885] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.467888] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.468062] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.468323] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00006c00
[ 1.468531] usb usb5: configuration #1 chosen from 1 choice
[ 1.468697] hub 5-0:1.0: USB hub found
[ 1.468829] hub 5-0:1.0: 2 ports detected
[ 1.469004] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.469143] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.469145] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.469320] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.469571] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080
[ 1.469777] usb usb6: configuration #1 chosen from 1 choice
[ 1.469939] hub 6-0:1.0: USB hub found
[ 1.470071] hub 6-0:1.0: 2 ports detected
[ 1.470249] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.470391] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.470394] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.470568] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.470821] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006400
[ 1.471026] usb usb7: configuration #1 chosen from 1 choice
[ 1.471189] hub 7-0:1.0: USB hub found
[ 1.471325] hub 7-0:1.0: 2 ports detected
[ 1.471501] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.471641] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.471643] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.471819] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.472071] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006480
[ 1.472276] usb usb8: configuration #1 chosen from 1 choice
[ 1.472443] hub 8-0:1.0: USB hub found
[ 1.472577] hub 8-0:1.0: 2 ports detected
[ 1.472795] usbcore: registered new interface driver libusual
[ 1.473004] PNP: No PS/2 controller found. Probing ports directly.
[ 1.473146] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 1.475668] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.475806] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.476024] mice: PS/2 mouse device common for all mice
[ 1.476735] cpuidle: using governor ladder
[ 1.477932] cpuidle: using governor menu
[ 1.478381] TCP cubic registered
[ 1.478515] NET: Registered protocol family 17
[ 1.478805] PM: Resume from disk failed.
[ 1.478813] registered taskstats version 1
[ 1.479091] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.479249] Initalizing network drop monitor service
[ 1.479398] Freeing unused kernel memory: 496k freed
[ 1.557242] fuse init (API version 7.12)
[ 1.608772] Platform driver 'floppy' needs updating - please use dev_pm_ops
[ 1.608953] Floppy drive(s): fd0 is 1.44M
[ 1.613407] dca service started, version 1.8
[ 1.616923] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 1.617060] Copyright (c) 2007-2009 Intel Corporation.
[ 1.617254] igb 0000:03:00.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41
[ 1.617417] igb 0000:03:00.0: setting latency timer to 64
[ 1.617721] igb 0000:03:00.0: irq 58 for MSI/MSI-X
[ 1.617725] igb 0000:03:00.0: irq 59 for MSI/MSI-X
[ 1.617728] igb 0000:03:00.0: irq 60 for MSI/MSI-X
[ 1.617732] igb 0000:03:00.0: irq 61 for MSI/MSI-X
[ 1.617735] igb 0000:03:00.0: irq 62 for MSI/MSI-X
[ 1.617739] igb 0000:03:00.0: irq 63 for MSI/MSI-X
[ 1.617742] igb 0000:03:00.0: irq 64 for MSI/MSI-X
[ 1.617745] igb 0000:03:00.0: irq 65 for MSI/MSI-X
[ 1.617748] igb 0000:03:00.0: irq 66 for MSI/MSI-X
[ 1.623661] sky2 driver version 1.23
[ 1.623963] sky2 0000:0a:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.624113] sky2 0000:0a:00.0: setting latency timer to 64
[ 1.624144] sky2 0000:0a:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.624264] FDC 0 is a post-1991 82077
[ 1.624558] sky2 0000:0a:00.0: irq 67 for MSI/MSI-X
[ 1.624842] sky2 eth0: addr 00:23:54:91:08:c2
[ 1.625230] sky2 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.625380] sky2 0000:07:00.0: setting latency timer to 64
[ 1.625398] sky2 0000:07:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.625616] sky2 0000:07:00.0: irq 68 for MSI/MSI-X
[ 1.625861] sky2 eth1: addr 00:23:54:91:08:c1
[ 1.629445] ahci 0000:08:00.0: version 3.0
[ 1.634460] ata_piix 0000:00:1f.2: version 2.13
[ 1.634482] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.634627] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.634946] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.635337] scsi0 : ata_piix
[ 1.637937] scsi1 : ata_piix
[ 1.639610] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14
[ 1.639757] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15
[ 1.641678] pata_marvell 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.641952] pata_marvell 0000:08:00.0: setting latency timer to 64
[ 1.642358] scsi2 : pata_marvell
[ 1.642527] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.642702] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.643005] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.643038] scsi3 : pata_marvell
[ 1.643194] scsi4 : ata_piix
[ 1.643374] ata3: PATA max UDMA/100 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 16
[ 1.643515] ata4: PATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 16
[ 1.643729] scsi5 : ata_piix
[ 1.645296] ata5: SATA max UDMA/133 cmd 0x6000 ctl 0x5c00 bmdma 0x5480 irq 20
[ 1.645442] ata6: SATA max UDMA/133 cmd 0x5880 ctl 0x5800 bmdma 0x5488 irq 20
[ 1.749385] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.797714] ata3.00: ATAPI: SONY DVD RW DW-U18A, UYS1, max UDMA/33
[ 1.803309] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.803478] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:d8
[ 1.803698] igb 0000:03:00.0: eth2: PBA No: d96950-002
[ 1.803835] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.803945] ata3.00: configured for UDMA/33
[ 1.804353] igb 0000:03:00.1: PCI INT B -> GSI 47 (level, low) -> IRQ 47
[ 1.804521] igb 0000:03:00.1: setting latency timer to 64
[ 1.804852] igb 0000:03:00.1: irq 69 for MSI/MSI-X
[ 1.804854] igb 0000:03:00.1: irq 70 for MSI/MSI-X
[ 1.804856] igb 0000:03:00.1: irq 71 for MSI/MSI-X
[ 1.804859] igb 0000:03:00.1: irq 72 for MSI/MSI-X
[ 1.804861] igb 0000:03:00.1: irq 73 for MSI/MSI-X
[ 1.804863] igb 0000:03:00.1: irq 74 for MSI/MSI-X
[ 1.804865] igb 0000:03:00.1: irq 75 for MSI/MSI-X
[ 1.804867] igb 0000:03:00.1: irq 76 for MSI/MSI-X
[ 1.804870] igb 0000:03:00.1: irq 77 for MSI/MSI-X
[ 1.863835] usb 1-5: configuration #1 chosen from 1 choice
[ 1.864131] hub 1-5:1.0: USB hub found
[ 1.864380] hub 1-5:1.0: 4 ports detected
[ 1.961455] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.972791] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.972794] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.988335] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 1.988472] igb 0000:03:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:d9
[ 1.988688] igb 0000:03:00.1: eth3: PBA No: d96950-002
[ 1.988820] igb 0000:03:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 1.989176] igb 0000:04:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.989393] igb 0000:04:00.0: setting latency timer to 64
[ 1.989658] igb 0000:04:00.0: irq 78 for MSI/MSI-X
[ 1.989660] igb 0000:04:00.0: irq 79 for MSI/MSI-X
[ 1.989662] igb 0000:04:00.0: irq 80 for MSI/MSI-X
[ 1.989665] igb 0000:04:00.0: irq 81 for MSI/MSI-X
[ 1.989667] igb 0000:04:00.0: irq 82 for MSI/MSI-X
[ 1.989669] igb 0000:04:00.0: irq 83 for MSI/MSI-X
[ 1.989672] igb 0000:04:00.0: irq 84 for MSI/MSI-X
[ 1.989674] igb 0000:04:00.0: irq 85 for MSI/MSI-X
[ 1.989676] igb 0000:04:00.0: irq 86 for MSI/MSI-X
[ 2.086658] usb 2-1: configuration #1 chosen from 1 choice
[ 2.086950] hub 2-1:1.0: USB hub found
[ 2.087225] hub 2-1:1.0: 4 ports detected
[ 2.173321] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.173458] igb 0000:04:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:dc
[ 2.173674] igb 0000:04:00.0: eth4: PBA No: d96950-002
[ 2.173806] igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.174164] igb 0000:04:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
[ 2.174330] igb 0000:04:00.1: setting latency timer to 64
[ 2.174596] igb 0000:04:00.1: irq 87 for MSI/MSI-X
[ 2.174599] igb 0000:04:00.1: irq 88 for MSI/MSI-X
[ 2.174601] igb 0000:04:00.1: irq 89 for MSI/MSI-X
[ 2.174603] igb 0000:04:00.1: irq 90 for MSI/MSI-X
[ 2.174605] igb 0000:04:00.1: irq 91 for MSI/MSI-X
[ 2.174607] igb 0000:04:00.1: irq 92 for MSI/MSI-X
[ 2.174609] igb 0000:04:00.1: irq 93 for MSI/MSI-X
[ 2.174611] igb 0000:04:00.1: irq 94 for MSI/MSI-X
[ 2.174614] igb 0000:04:00.1: irq 95 for MSI/MSI-X
[ 2.260135] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 2.260309] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.271273] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 2.271415] ata1.01: SATA link down (SStatus 0 SControl 301)
[ 2.272631] scsi 2:0:0:0: CD-ROM SONY DVD RW DW-U18A UYS1 PQ: 0 ANSI: 5
[ 2.360369] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[ 2.375217] igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 2.375354] igb 0000:04:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 00:1b:21:06:2a:dd
[ 2.375584] igb 0000:04:00.1: eth5: PBA No: d96950-002
[ 2.375716] igb 0000:04:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 2.440925] mvsas 0000:09:00.0: mvsas: driver version 0.8.2
[ 2.441083] mvsas 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.441234] mvsas 0000:09:00.0: setting latency timer to 64
[ 2.442150] mvsas 0000:09:00.0: mvsas: PCI-E x1, Bandwidth Usage: 2.5 Gbps
[ 2.448073] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.448215] Uniform CD-ROM driver Revision: 3.20
[ 2.448438] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.450907] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.451781] usb 2-1.1: configuration #1 chosen from 1 choice
[ 2.457408] usbcore: registered new interface driver hiddev
[ 2.457651] usbcore: registered new interface driver usbhid
[ 2.457794] usbhid: v2.6:USB HID core driver
[ 2.463878] input: Belkin Corporation Flip CC as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[ 2.464234] belkin 0003:050D:3201.0001: input,hiddev96,hidraw0: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1d.7-1.1/input0
[ 2.526314] usb 2-1.3: new low speed USB device using ehci_hcd and address 4
[ 2.617231] usb 2-1.3: configuration #1 chosen from 1 choice
[ 2.619653] input: Kensington USB/PS2 Wheel Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[ 2.619940] generic-usb 0003:047D:1029.0002: input,hidraw1: USB HID v1.10 Mouse [Kensington USB/PS2 Wheel Mouse] on usb-0000:00:1d.7-1.3/input0
[ 2.693257] usb 2-1.4: new low speed USB device using ehci_hcd and address 5
[ 2.785799] usb 2-1.4: configuration #1 chosen from 1 choice
[ 2.803155] input: Key Tronic Keytronic USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.4/2-1.4:1.0/input/input4
[ 2.803472] generic-usb 0003:03F9:0100.0003: input,hidraw2: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:1d.7-1.4/input0
[ 5.000766] scsi6 : mvsas
[ 5.001228] drivers/scsi/mvsas/mv_sas.c 1250:set wide port phy map 1
[ 5.012251] scsi 6:0:0:0: Direct-Access FUJITSU MBA3147RC 0103 PQ: 0 ANSI: 5
[ 6.001744] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.191196] sd 6:0:0:0: [sda] 287277984 512-byte logical blocks: (147 GB/136 GiB)
[ 6.430591] sd 6:0:0:0: [sda] Write Protect is off
[ 6.430787] sd 6:0:0:0: [sda] Mode Sense: bf 00 00 08
[ 6.432080] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.437403] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 6.500196] sd 6:0:0:0: [sda] Attached SCSI disk
[ 11.830746] kjournald starting. Commit interval 5 seconds
[ 11.830752] EXT3-fs: mounted filesystem with writeback data mode.
[ 14.305882] udev: starting version 141
[ 14.512407] IPv4 FIB: Using LC-trie version 0.408
[ 14.516163] ACPI: WMI: Mapper loaded
[ 14.596483] rtc_cmos 00:03: RTC can wake from S4
[ 14.596677] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 14.596833] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 14.630668] Platform driver 'pcspkr' needs updating - please use dev_pm_ops
[ 14.630844] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 15.109551] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.109899] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.500672] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
[ 15.611381] Adding 1060280k swap on /dev/sda2. Priority:-1 extents:1 across:1060280k
[ 15.757706] EXT3 FS on sda1, internal journal
[ 16.043147] EXT4-fs (sda3): barriers enabled
[ 16.047231] kjournald2 starting: pid 4776, dev sda3:8, commit interval 5 seconds
[ 16.047503] EXT4-fs (sda3): internal journal on sda3:8
[ 16.047506] EXT4-fs (sda3): delayed allocation enabled
[ 16.047508] EXT4-fs: file extents enabled
[ 16.048108] EXT4-fs: mballoc enabled
[ 16.048118] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 16.564004] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x020b0001
[ 17.245831] NET: Registered protocol family 10
[ 17.246186] lo: Disabled Privacy Extensions
[ 18.107505] Bridge firewalling registered
[ 18.124812] virbr0: starting userspace STP failed, starting kernel STP
[ 18.287453] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.451520] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.688530] virbr3: starting userspace STP failed, starting kernel STP
[ 18.726066] virbr4: starting userspace STP failed, starting kernel STP
[ 18.755625] virbr2: starting userspace STP failed, starting kernel STP
[ 18.777510] virbr1: starting userspace STP failed, starting kernel STP
[ 20.087783] pci 0000:05:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 24.285950] sky2 eth1: enabling interface
[ 24.286864] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 24.290566] sky2 eth0: enabling interface
[ 24.291567] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.313003] ADDRCONF(NETDEV_UP): eth5: link is not ready
[ 24.326627] ADDRCONF(NETDEV_UP): eth4: link is not ready
[ 24.339791] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 24.352864] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 26.754544] sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both
[ 26.755496] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 28.367408] virbr0: no IPv6 routers present
[ 29.010256] virbr1: no IPv6 routers present
[ 29.137267] virbr2: no IPv6 routers present
[ 29.301231] virbr4: no IPv6 routers present
[ 29.506194] virbr3: no IPv6 routers present
[ 37.333717] eth1: no IPv6 routers present
[ 2402.706067] tun: Universal TUN/TAP device driver, 1.6
[ 2402.706070] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 2402.707593] device vnet0 entered promiscuous mode
[ 2402.708585] virbr0: topology change detected, propagating
[ 2402.708589] virbr0: port 1(vnet0) entering forwarding state
[ 2413.346614] vnet0: no IPv6 routers present
[ 2586.373657] device vnet1 entered promiscuous mode
[ 2586.374762] virbr0: topology change detected, propagating
[ 2586.374767] virbr0: port 2(vnet1) entering forwarding state
[ 2597.311968] vnet1: no IPv6 routers present
[ 2661.394421] virbr0: port 2(vnet1) entering disabled state
[ 2661.398597] device vnet1 left promiscuous mode
[ 2661.398603] virbr0: port 2(vnet1) entering disabled state
[ 2685.630391] device vnet1 entered promiscuous mode
[ 2685.631429] virbr0: topology change detected, propagating
[ 2685.631434] virbr0: port 2(vnet1) entering forwarding state
[ 2696.432735] vnet1: no IPv6 routers present

2009-07-09 23:23:17

by john stultz

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Thu, 2009-07-09 at 15:38 -0700, Stephen Hemminger wrote:
> On Thu, 9 Jul 2009 14:58:37 -0700
> john stultz <[email protected]> wrote:
>
> > On Thu, Jul 9, 2009 at 2:10 PM, Stephen Hemminger<[email protected]> wrote:
> > > My system (desktop Ubuntu 9.0) runs fine with 2.6.30, but with 2.6.31-rc2 it does
> > > not keep time correctly. Also ntptime reports an error.
> >
> > Can you better describe how it does not keep time? Is time moving too
> > slow? too fast?
>
> The clock just seemed to stop, or be wildly stuck in past.

Hrmm. And the box continues to function? If the clock stops, so does
timers, which will usually make a box seem to be totally hung.

>From the messages below, it doesn't seem to be stopped.

> > Could you include output from the following commands with 2.6.31-rc2
> > (and 2.6.30 if you have the time).
> > $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> > $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> > $ dmesg
> > $ ntpdc -c peers
> > $ ntpdc -c kerninfo
>
> $ cat /sys/devices/system/clocksource/clocksource0/available_clocksource
> tsc hpet acpi_pm
> $ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
> tsc


Ok. One thing to check is if the issue goes away if you either boot with
"clocksource=acpi_pm" or run

echo acpi_pm > /sys/devices/system/clocksource/clocksource0/current_clocksource

> # ntpdc -c peers
> remote local st poll reach delay offset disp
> =======================================================================
> *ussprometheus.r 192.168.1.3 2 128 377 0.09094 0.007730 0.06786

You don't seem to be very far off right now. Only 7ms. And it seems you
have gone into NTP sync state (the * denotes that).

I'm guessing ntptime no longer gives you errors now?

> # ntpdc -c kerninfo
> pll offset: 0.005107 s
> pll frequency: 155.028 ppm
> maximum error: 0.219122 s
> estimated error: 0.007209 s
> status: 0001 pll
> pll time constant: 7
> precision: 1e-06 s
> frequency tolerance: 500 ppm

This all looks normal.



> $ dmesg
> [ 0.000000] Linux version 2.6.31-rc2 (shemminger@nehalam) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #149 SMP Tue Jul 7 18:22:50 PDT 2009
[snip]
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2673.143 MHz processor.

You might watch from boot to boot if the above MHz is varying by too
much.

Everything else looks ok.


I'm a little stumped. Does the problem occur on every reboot? How long
does the box need to be up before you see an issue? Or does it go away
after a little while?

thanks
-john

2009-07-09 23:31:17

by Stephen Hemminger

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2


>
> I'm a little stumped. Does the problem occur on every reboot? How long
> does the box need to be up before you see an issue? Or does it go away
> after a little while?

It seemed to take a while (several hours). I will leave it running overnight

2009-07-14 18:45:50

by Philippe Troin

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

Stephen Hemminger <[email protected]> writes:

> > I'm a little stumped. Does the problem occur on every reboot? How long
> > does the box need to be up before you see an issue? Or does it go away
> > after a little while?
>
> It seemed to take a while (several hours). I will leave it running overnight

Interestingly, I am seeing the same problem on two boxes with
2.6.2{5,6}. I haven't checked yet more recent kernels.

The odd thing was that booting with "nohz=off highres=off" did not
help, the only cure was to recompile the kernel and disable
CONFIG_HIGH_RES_TIMERS and CONFIG_NO_HZ.

This is the thread back then:
http://marc.info/?t=121563147700003&r=1&w=2

Phil.

2009-07-15 22:57:58

by john stultz

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Tue, 2009-07-14 at 11:35 -0700, Philippe Troin wrote:
> Stephen Hemminger <[email protected]> writes:
>
> > > I'm a little stumped. Does the problem occur on every reboot? How long
> > > does the box need to be up before you see an issue? Or does it go away
> > > after a little while?
> >
> > It seemed to take a while (several hours). I will leave it running overnight
>
> Interestingly, I am seeing the same problem on two boxes with
> 2.6.2{5,6}. I haven't checked yet more recent kernels.

I suspect your issue and Stephen's issue are separate.

> The odd thing was that booting with "nohz=off highres=off" did not
> help, the only cure was to recompile the kernel and disable
> CONFIG_HIGH_RES_TIMERS and CONFIG_NO_HZ.
>
> This is the thread back then:
> http://marc.info/?t=121563147700003&r=1&w=2

Thomas, did you ever take a look at this? It looks like something's off
w/ hrt.

thanks
-john

2009-07-15 22:58:43

by john stultz

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Thu, 2009-07-09 at 16:30 -0700, Stephen Hemminger wrote:
> >
> > I'm a little stumped. Does the problem occur on every reboot? How long
> > does the box need to be up before you see an issue? Or does it go away
> > after a little while?
>
> It seemed to take a while (several hours). I will leave it running overnight

Hey Stephen,
Just checking in on this. Did you see the issue crop up again. Do you
have any more info?

thanks
-john

2009-07-16 15:08:07

by Stephen Hemminger

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

On Wed, 15 Jul 2009 15:58:00 -0700
john stultz <[email protected]> wrote:

> On Thu, 2009-07-09 at 16:30 -0700, Stephen Hemminger wrote:
> > >
> > > I'm a little stumped. Does the problem occur on every reboot? How long
> > > does the box need to be up before you see an issue? Or does it go away
> > > after a little while?
> >
> > It seemed to take a while (several hours). I will leave it running overnight
>
> Hey Stephen,
> Just checking in on this. Did you see the issue crop up again. Do you
> have any more info?
>
> thanks
> -john
>
>

did not reproduce :-( so can't collect more data.

--

2009-09-11 03:53:16

by Philippe Troin

[permalink] [raw]
Subject: Re: Clock incorrect on 2.6.31-rc2

john stultz <[email protected]> writes:

> On Tue, 2009-07-14 at 11:35 -0700, Philippe Troin wrote:
> > Stephen Hemminger <[email protected]> writes:
> >
> > > > I'm a little stumped. Does the problem occur on every reboot? How long
> > > > does the box need to be up before you see an issue? Or does it go away
> > > > after a little while?
> > >
> > > It seemed to take a while (several hours). I will leave it running overnight
> >
> > Interestingly, I am seeing the same problem on two boxes with
> > 2.6.2{5,6}. I haven't checked yet more recent kernels.
>
> I suspect your issue and Stephen's issue are separate.

Indeed.

The problem is fixed as of 2.6.29 (might have been fixed earlier, I
just checked this kernel version).

Phil.