2022-12-02 08:34:13

by Dicheng Wang

[permalink] [raw]
Subject: [PATCH -next] The USB audio driver does not contain the VID and PID of this sound card, so the driver is not loaded.

From: wangdicheng <[email protected]>

Add relevant information to the quirks-table.h file.
The test passes and the sound source file plays normally.

Cc: [email protected]
Signed-off-by: wangdicheng <[email protected]>
---
sound/usb/quirks-table.h | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 874fcf245747..1fb183895da0 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2802,6 +2802,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.idProduct = 0x1020,
},

+/* Ktmicro Usb_audio device */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x31b2,
+ .idProduct = 0x0011,
+},
+
/* QinHeng devices */
{
USB_DEVICE(0x1a86, 0x752d),
--
2.25.1


2022-12-02 13:38:25

by Takashi Iwai

[permalink] [raw]
Subject: Re: [PATCH -next] The USB audio driver does not contain the VID and PID of this sound card, so the driver is not loaded.

On Fri, 02 Dec 2022 09:29:08 +0100,
Dicheng Wang wrote:
>
> From: wangdicheng <[email protected]>
>
> Add relevant information to the quirks-table.h file.
> The test passes and the sound source file plays normally.
>
> Cc: [email protected]
> Signed-off-by: wangdicheng <[email protected]>

The code change itself looks good, but could you fix the patch subject
line? It should have the proper prefix (in this case something like
"ALSA: usb-audio: Blah blah..."), and the text is unnecessarily long.
Please make it concise.

Also, could you give the lsusb -v output of the corresponding device?
Just to make sure. If possible, it'd be better to use the existing
macro like USB_DEVICE_VENDOR_SPEC() or USB_AUDIO_DEVICE() instead.


thanks,

Takashi


> ---
> sound/usb/quirks-table.h | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
> index 874fcf245747..1fb183895da0 100644
> --- a/sound/usb/quirks-table.h
> +++ b/sound/usb/quirks-table.h
> @@ -2802,6 +2802,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
> .idProduct = 0x1020,
> },
>
> +/* Ktmicro Usb_audio device */
> +{
> + .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
> + .idVendor = 0x31b2,
> + .idProduct = 0x0011,
> +},
> +
> /* QinHeng devices */
> {
> USB_DEVICE(0x1a86, 0x752d),
> --
> 2.25.1
>