For git users patches are available in git:
git://github.com/aryabinin/linux.git kasan/arm64v4
Changes since v3:
- Generate KASAN_SHADOW_OFFSET in Makefile
- zero_p*_populate() functions now return void
- Switch x86 to generic kasan_populate_zero_shadow() too
- Add license headers
- fix memleak in kasan_populate_zero_shadow:
Following code could leak memory when pgd_populate() is nop:
void *p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
pgd_populate(&init_mm, pgd, p);
This was replaced by:
pgd_populate(&init_mm, pgd, early_alloc(PAGE_SIZE, NUMA_NO_NODE));
Changes since v2:
- Rebase on top of v4.2-rc3
- Address feedback from Catalin.
- Print memory assignment from Linus
- Add message about KASAN being initialized
Changes since v1:
- Address feedback from Catalin.
- Generalize some kasan init code from arch/x86/mm/kasan_init_64.c
and reuse it for arm64.
- Some bugfixes, including:
add missing arm64/include/asm/kasan.h
add tlb flush after changing ttbr1
- Add code comments.
Andrey Ryabinin (6):
x86/kasan: generate KASAN_SHADOW_OFFSET in Makefile
mm: kasan: introduce generic kasan_populate_zero_shadow()
arm64: introduce VA_START macro - the first kernel virtual address.
arm64: move PGD_SIZE definition to pgalloc.h
arm64: add KASAN support
x86/kasan: switch to generic kasan_populate_zero_shadow()
Linus Walleij (1):
ARM64: kasan: print memory assignment
arch/arm64/Kconfig | 1 +
arch/arm64/Makefile | 6 ++
arch/arm64/include/asm/kasan.h | 36 +++++++++
arch/arm64/include/asm/memory.h | 2 +
arch/arm64/include/asm/pgalloc.h | 1 +
arch/arm64/include/asm/pgtable.h | 9 ++-
arch/arm64/include/asm/string.h | 16 ++++
arch/arm64/kernel/arm64ksyms.c | 3 +
arch/arm64/kernel/head.S | 3 +
arch/arm64/kernel/module.c | 16 +++-
arch/arm64/kernel/setup.c | 2 +
arch/arm64/lib/memcpy.S | 3 +
arch/arm64/lib/memmove.S | 7 +-
arch/arm64/lib/memset.S | 3 +
arch/arm64/mm/Makefile | 3 +
arch/arm64/mm/init.c | 6 ++
arch/arm64/mm/kasan_init.c | 165 +++++++++++++++++++++++++++++++++++++++
arch/arm64/mm/pgd.c | 2 -
arch/x86/Kconfig | 5 --
arch/x86/Makefile | 2 +
arch/x86/include/asm/kasan.h | 21 +++--
arch/x86/mm/kasan_init_64.c | 123 ++---------------------------
include/linux/kasan.h | 9 ++-
mm/kasan/Makefile | 2 +-
mm/kasan/kasan_init.c | 151 +++++++++++++++++++++++++++++++++++
scripts/Makefile.kasan | 2 +-
26 files changed, 457 insertions(+), 142 deletions(-)
create mode 100644 arch/arm64/include/asm/kasan.h
create mode 100644 arch/arm64/mm/kasan_init.c
create mode 100644 mm/kasan/kasan_init.c
--
2.4.5
ARM64 has several different address space layouts and its
going to have one more at least. Different address space layouts
have different shadow offsets, so every new layout require adding
new default value for CONFIG_KASAN_SHADOW_OFFSET.
It's possible to generate KASAN_SHADOW_OFFSET in Makefile, so
the shadow address for every possible layout will be auto-generated.
However, we should do this in x86 too, because generic code
depend on having CONFIG_KASAN_SHADOW_OFFSET.
There is no functional changes here.
Signed-off-by: Andrey Ryabinin <[email protected]>
---
arch/x86/Kconfig | 5 -----
arch/x86/Makefile | 2 ++
arch/x86/include/asm/kasan.h | 21 +++++++++++++--------
include/linux/kasan.h | 1 -
scripts/Makefile.kasan | 2 +-
5 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b3a1a5d..6d6dd6f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -255,11 +255,6 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y
-config KASAN_SHADOW_OFFSET
- hex
- depends on KASAN
- default 0xdffffc0000000000
-
config HAVE_INTEL_TXT
def_bool y
depends on INTEL_IOMMU && ACPI
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 118e6de..c666989 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -39,6 +39,8 @@ ifdef CONFIG_X86_NEED_RELOCS
LDFLAGS_vmlinux := --emit-relocs
endif
+KASAN_SHADOW_OFFSET := 0xdffffc0000000000
+
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
diff --git a/arch/x86/include/asm/kasan.h b/arch/x86/include/asm/kasan.h
index 74a2a8d..88881f6 100644
--- a/arch/x86/include/asm/kasan.h
+++ b/arch/x86/include/asm/kasan.h
@@ -1,17 +1,22 @@
#ifndef _ASM_X86_KASAN_H
#define _ASM_X86_KASAN_H
-/*
- * Compiler uses shadow offset assuming that addresses start
- * from 0. Kernel addresses don't start from 0, so shadow
- * for kernel really starts from compiler's shadow offset +
- * 'kernel address space start' >> KASAN_SHADOW_SCALE_SHIFT
- */
-#define KASAN_SHADOW_START (KASAN_SHADOW_OFFSET + \
- (0xffff800000000000ULL >> 3))
+#define KASAN_SHADOW_START (0xffffec0000000000ULL)
/* 47 bits for kernel address -> (47 - 3) bits for shadow */
#define KASAN_SHADOW_END (KASAN_SHADOW_START + (1ULL << (47 - 3)))
+/*
+ * This value is used to map an address to the corresponding shadow
+ * address by the following formula:
+ * shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
+ *
+ * (1 << 61) shadow addresses - [KASAN_SHADOW_OFFSET,KASAN_SHADOW_END]
+ * cover all 64-bits of virtual addresses. So KASAN_SHADOW_OFFSET
+ * should satisfy the following equation:
+ * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - (1ULL << 61)
+ */
+#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1UL << (64 - 3)))
+
#ifndef __ASSEMBLY__
#ifdef CONFIG_KASAN
diff --git a/include/linux/kasan.h b/include/linux/kasan.h
index 5486d77..6fb1c7d 100644
--- a/include/linux/kasan.h
+++ b/include/linux/kasan.h
@@ -10,7 +10,6 @@ struct vm_struct;
#ifdef CONFIG_KASAN
#define KASAN_SHADOW_SCALE_SHIFT 3
-#define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
#include <asm/kasan.h>
#include <linux/sched.h>
diff --git a/scripts/Makefile.kasan b/scripts/Makefile.kasan
index 3f874d2..19d9a61 100644
--- a/scripts/Makefile.kasan
+++ b/scripts/Makefile.kasan
@@ -8,7 +8,7 @@ endif
CFLAGS_KASAN_MINIMAL := -fsanitize=kernel-address
CFLAGS_KASAN := $(call cc-option, -fsanitize=kernel-address \
- -fasan-shadow-offset=$(CONFIG_KASAN_SHADOW_OFFSET) \
+ -fasan-shadow-offset=$(KASAN_SHADOW_OFFSET) \
--param asan-stack=1 --param asan-globals=1 \
--param asan-instrumentation-with-call-threshold=$(call_threshold))
--
2.4.5
Introduce generic kasan_populate_zero_shadow(start, end).
This function maps kasan_zero_page to the [start, end] addresses.
In follow on patches it will be used for ARMv8 (and maybe other
architectures) and will replace x86_64 specific populate_zero_shadow().
Signed-off-by: Andrey Ryabinin <[email protected]>
---
arch/x86/mm/kasan_init_64.c | 14 ----
include/linux/kasan.h | 8 +++
mm/kasan/Makefile | 2 +-
mm/kasan/kasan_init.c | 151 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 160 insertions(+), 15 deletions(-)
create mode 100644 mm/kasan/kasan_init.c
diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index e1840f3..812086c 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -12,20 +12,6 @@
extern pgd_t early_level4_pgt[PTRS_PER_PGD];
extern struct range pfn_mapped[E820_X_MAX];
-static pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
-static pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
-static pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
-
-/*
- * This page used as early shadow. We don't use empty_zero_page
- * at early stages, stack instrumentation could write some garbage
- * to this page.
- * Latter we reuse it as zero shadow for large ranges of memory
- * that allowed to access, but not instrumented by kasan
- * (vmalloc/vmemmap ...).
- */
-static unsigned char kasan_zero_page[PAGE_SIZE] __page_aligned_bss;
-
static int __init map_range(struct range *range)
{
unsigned long start;
diff --git a/include/linux/kasan.h b/include/linux/kasan.h
index 6fb1c7d..d795f53 100644
--- a/include/linux/kasan.h
+++ b/include/linux/kasan.h
@@ -12,8 +12,16 @@ struct vm_struct;
#define KASAN_SHADOW_SCALE_SHIFT 3
#include <asm/kasan.h>
+#include <asm/pgtable.h>
#include <linux/sched.h>
+extern unsigned char kasan_zero_page[PAGE_SIZE];
+extern pte_t kasan_zero_pte[PTRS_PER_PTE];
+extern pmd_t kasan_zero_pmd[PTRS_PER_PMD];
+extern pud_t kasan_zero_pud[PTRS_PER_PUD];
+
+void kasan_populate_zero_shadow(const void *from, const void *to);
+
static inline void *kasan_mem_to_shadow(const void *addr)
{
return (void *)((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
diff --git a/mm/kasan/Makefile b/mm/kasan/Makefile
index bd837b8..6471014 100644
--- a/mm/kasan/Makefile
+++ b/mm/kasan/Makefile
@@ -5,4 +5,4 @@ CFLAGS_REMOVE_kasan.o = -pg
# see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63533
CFLAGS_kasan.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
-obj-y := kasan.o report.o
+obj-y := kasan.o report.o kasan_init.o
diff --git a/mm/kasan/kasan_init.c b/mm/kasan/kasan_init.c
new file mode 100644
index 0000000..e276853
--- /dev/null
+++ b/mm/kasan/kasan_init.c
@@ -0,0 +1,151 @@
+/*
+ * This file contains some kasan initialization code.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/pfn.h>
+
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+/*
+ * This page serves two purposes:
+ * - It used as early shadow memory. The entire shadow region populated
+ * with this page, before we will be able to setup normal shadow memory.
+ * - Latter it reused it as zero shadow to cover large ranges of memory
+ * that allowed to access, but not handled by kasan (vmalloc/vmemmap ...).
+ */
+unsigned char kasan_zero_page[PAGE_SIZE] __page_aligned_bss;
+
+#if CONFIG_PGTABLE_LEVELS > 3
+pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
+#endif
+#if CONFIG_PGTABLE_LEVELS > 2
+pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
+#endif
+pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
+
+static __init void *early_alloc(size_t size, int node)
+{
+ return memblock_virt_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
+ BOOTMEM_ALLOC_ACCESSIBLE, node);
+}
+
+static void __init zero_pte_populate(pmd_t *pmd, unsigned long addr,
+ unsigned long end)
+{
+ pte_t *pte = pte_offset_kernel(pmd, addr);
+ pte_t zero_pte;
+
+ zero_pte = pfn_pte(PFN_DOWN(__pa(kasan_zero_page)), PAGE_KERNEL);
+ zero_pte = pte_wrprotect(zero_pte);
+
+ while (addr + PAGE_SIZE <= end) {
+ set_pte_at(&init_mm, addr, pte, zero_pte);
+ addr += PAGE_SIZE;
+ pte = pte_offset_kernel(pmd, addr);
+ }
+}
+
+static void __init zero_pmd_populate(pud_t *pud, unsigned long addr,
+ unsigned long end)
+{
+ pmd_t *pmd = pmd_offset(pud, addr);
+ unsigned long next;
+
+ do {
+ next = pmd_addr_end(addr, end);
+
+ if (IS_ALIGNED(addr, PMD_SIZE) && end - addr >= PMD_SIZE) {
+ pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
+ continue;
+ }
+
+ if (pmd_none(*pmd)) {
+ pmd_populate_kernel(&init_mm, pmd,
+ early_alloc(PAGE_SIZE, NUMA_NO_NODE));
+ }
+ zero_pte_populate(pmd, addr, next);
+ } while (pmd++, addr = next, addr != end);
+}
+
+static void __init zero_pud_populate(pgd_t *pgd, unsigned long addr,
+ unsigned long end)
+{
+ pud_t *pud = pud_offset(pgd, addr);
+ unsigned long next;
+
+ do {
+ next = pud_addr_end(addr, end);
+ if (IS_ALIGNED(addr, PUD_SIZE) && end - addr >= PUD_SIZE) {
+ pmd_t *pmd;
+
+ pud_populate(&init_mm, pud, kasan_zero_pmd);
+ pmd = pmd_offset(pud, addr);
+ pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
+ continue;
+ }
+
+ if (pud_none(*pud)) {
+ pud_populate(&init_mm, pud,
+ early_alloc(PAGE_SIZE, NUMA_NO_NODE));
+ }
+ zero_pmd_populate(pud, addr, next);
+ } while (pud++, addr = next, addr != end);
+}
+
+/**
+ * kasan_populate_zero_shadow - populate shadow memory region with
+ * kasan_zero_page
+ * @from - start of the memory range to populate
+ * @to - end of the memory range to populate
+ */
+void __init kasan_populate_zero_shadow(const void *from, const void *to)
+{
+ unsigned long addr = (unsigned long)from;
+ unsigned long end = (unsigned long)to;
+ pgd_t *pgd = pgd_offset_k(addr);
+ unsigned long next;
+
+ do {
+ next = pgd_addr_end(addr, end);
+
+ if (IS_ALIGNED(addr, PGDIR_SIZE) && end - addr >= PGDIR_SIZE) {
+ pud_t *pud;
+ pmd_t *pmd;
+
+ /*
+ * kasan_zero_pud should be populated with pmds
+ * at this moment.
+ * [pud,pmd]_populate*() below needed only for
+ * 3,2 - level page tables where we don't have
+ * puds,pmds, so pgd_populate(), pud_populate()
+ * is noops.
+ */
+ pgd_populate(&init_mm, pgd, kasan_zero_pud);
+ pud = pud_offset(pgd, addr);
+ pud_populate(&init_mm, pud, kasan_zero_pmd);
+ pmd = pmd_offset(pud, addr);
+ pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
+ continue;
+ }
+
+ if (pgd_none(*pgd)) {
+ pgd_populate(&init_mm, pgd,
+ early_alloc(PAGE_SIZE, NUMA_NO_NODE));
+ }
+ zero_pud_populate(pgd, addr, next);
+ } while (pgd++, addr = next, addr != end);
+}
--
2.4.5
In order to not use lengthy (UL(0xffffffffffffffff) << VA_BITS) everywhere,
replace it with VA_START.
Signed-off-by: Andrey Ryabinin <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
---
arch/arm64/include/asm/memory.h | 2 ++
arch/arm64/include/asm/pgtable.h | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index f800d45..288c19d 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -42,12 +42,14 @@
* PAGE_OFFSET - the virtual address of the start of the kernel image (top
* (VA_BITS - 1))
* VA_BITS - the maximum number of bits for virtual addresses.
+ * VA_START - the first kernel virtual address.
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 128MB of the kernel text.
*/
#define VA_BITS (CONFIG_ARM64_VA_BITS)
+#define VA_START (UL(0xffffffffffffffff) << VA_BITS)
#define PAGE_OFFSET (UL(0xffffffffffffffff) << (VA_BITS - 1))
#define MODULES_END (PAGE_OFFSET)
#define MODULES_VADDR (MODULES_END - SZ_64M)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 56283f8..a1f9f61 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -40,7 +40,7 @@
* fixed mappings and modules
*/
#define VMEMMAP_SIZE ALIGN((1UL << (VA_BITS - PAGE_SHIFT)) * sizeof(struct page), PUD_SIZE)
-#define VMALLOC_START (UL(0xffffffffffffffff) << VA_BITS)
+#define VMALLOC_START (VA_START)
#define VMALLOC_END (PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
#define vmemmap ((struct page *)(VMALLOC_END + SZ_64K))
--
2.4.5
This will be used by KASAN latter.
Signed-off-by: Andrey Ryabinin <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
---
arch/arm64/include/asm/pgalloc.h | 1 +
arch/arm64/mm/pgd.c | 2 --
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h
index 7642056..c150539 100644
--- a/arch/arm64/include/asm/pgalloc.h
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -27,6 +27,7 @@
#define check_pgt_cache() do { } while (0)
#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
#if CONFIG_PGTABLE_LEVELS > 2
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
index 71ca104..cb3ba1b 100644
--- a/arch/arm64/mm/pgd.c
+++ b/arch/arm64/mm/pgd.c
@@ -28,8 +28,6 @@
#include "mm.h"
-#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
-
static struct kmem_cache *pgd_cache;
pgd_t *pgd_alloc(struct mm_struct *mm)
--
2.4.5
This patch adds arch specific code for kernel address sanitizer
(see Documentation/kasan.txt).
1/8 of kernel addresses reserved for shadow memory. There was no
big enough hole for this, so virtual addresses for shadow were
stolen from vmalloc area.
At early boot stage the whole shadow region populated with just
one physical page (kasan_zero_page). Later, this page reused
as readonly zero shadow for some memory that KASan currently
don't track (vmalloc).
After mapping the physical memory, pages for shadow memory are
allocated and mapped.
Functions like memset/memmove/memcpy do a lot of memory accesses.
If bad pointer passed to one of these function it is important
to catch this. Compiler's instrumentation cannot do this since
these functions are written in assembly.
KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions
in mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in name, so we could call non-instrumented variant
if needed.
Some files built without kasan instrumentation (e.g. mm/slub.c).
Original mem* function replaced (via #define) with prefixed variants
to disable memory access checks for such files.
Signed-off-by: Andrey Ryabinin <[email protected]>
Tested-by: Linus Walleij <[email protected]>
---
arch/arm64/Kconfig | 1 +
arch/arm64/Makefile | 6 ++
arch/arm64/include/asm/kasan.h | 36 +++++++++
arch/arm64/include/asm/pgtable.h | 7 ++
arch/arm64/include/asm/string.h | 16 ++++
arch/arm64/kernel/arm64ksyms.c | 3 +
arch/arm64/kernel/head.S | 3 +
arch/arm64/kernel/module.c | 16 +++-
arch/arm64/kernel/setup.c | 2 +
arch/arm64/lib/memcpy.S | 3 +
arch/arm64/lib/memmove.S | 7 +-
arch/arm64/lib/memset.S | 3 +
arch/arm64/mm/Makefile | 3 +
arch/arm64/mm/kasan_init.c | 165 +++++++++++++++++++++++++++++++++++++++
14 files changed, 266 insertions(+), 5 deletions(-)
create mode 100644 arch/arm64/include/asm/kasan.h
create mode 100644 arch/arm64/mm/kasan_init.c
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 318175f..b4a379e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -46,6 +46,7 @@ config ARM64
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
select HAVE_ARCH_JUMP_LABEL
+ select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 4d2a925..2cacf55 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -40,6 +40,12 @@ else
TEXT_OFFSET := 0x00080000
endif
+# KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - 3)) - (1 << 61)
+KASAN_SHADOW_OFFSET := $(shell printf "0x%x\n" $$(( \
+ (-1 << $(CONFIG_ARM64_VA_BITS)) \
+ + (1 << ($(CONFIG_ARM64_VA_BITS) - 3)) \
+ - (1 << (64 - 3)) )) )
+
export TEXT_OFFSET GZFLAGS
core-y += arch/arm64/kernel/ arch/arm64/mm/
diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
new file mode 100644
index 0000000..71dfe14
--- /dev/null
+++ b/arch/arm64/include/asm/kasan.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_KASAN
+
+#include <asm/memory.h>
+
+/*
+ * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
+ * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/8 of kernel virtual addresses.
+ */
+#define KASAN_SHADOW_START (VA_START)
+#define KASAN_SHADOW_END (KASAN_SHADOW_START + (1UL << (VA_BITS - 3)))
+
+/*
+ * This value is used to map an address to the corresponding shadow
+ * address by the following formula:
+ * shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;
+ *
+ * (1 << 61) shadow addresses - [KASAN_SHADOW_OFFSET,KASAN_SHADOW_END]
+ * cover all 64-bits of virtual addresses. So KASAN_SHADOW_OFFSET
+ * should satisfy the following equation:
+ * KASAN_SHADOW_OFFSET = KASAN_SHADOW_END - (1ULL << 61)
+ */
+#define KASAN_SHADOW_OFFSET (KASAN_SHADOW_END - (1ULL << (64 - 3)))
+
+void kasan_init(void);
+
+#else
+static inline void kasan_init(void) { }
+#endif
+
+#endif
+#endif
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index a1f9f61..a071da4 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -40,7 +40,14 @@
* fixed mappings and modules
*/
#define VMEMMAP_SIZE ALIGN((1UL << (VA_BITS - PAGE_SHIFT)) * sizeof(struct page), PUD_SIZE)
+
+#ifndef CONFIG_KASAN
#define VMALLOC_START (VA_START)
+#else
+#include <asm/kasan.h>
+#define VMALLOC_START (KASAN_SHADOW_END + SZ_64K)
+#endif
+
#define VMALLOC_END (PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
#define vmemmap ((struct page *)(VMALLOC_END + SZ_64K))
diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h
index 64d2d48..2eb714c 100644
--- a/arch/arm64/include/asm/string.h
+++ b/arch/arm64/include/asm/string.h
@@ -36,17 +36,33 @@ extern __kernel_size_t strnlen(const char *, __kernel_size_t);
#define __HAVE_ARCH_MEMCPY
extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
#define __HAVE_ARCH_MEMMOVE
extern void *memmove(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
#define __HAVE_ARCH_MEMCHR
extern void *memchr(const void *, int, __kernel_size_t);
#define __HAVE_ARCH_MEMSET
extern void *memset(void *, int, __kernel_size_t);
+extern void *__memset(void *, int, __kernel_size_t);
#define __HAVE_ARCH_MEMCMP
extern int memcmp(const void *, const void *, size_t);
+
+#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+
+/*
+ * For files that are not instrumented (e.g. mm/slub.c) we
+ * should use not instrumented version of mem* functions.
+ */
+
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memmove(dst, src, len) __memmove(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+#endif
+
#endif
diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c
index a85843d..3b6d8cc 100644
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -51,6 +51,9 @@ EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(__memset);
+EXPORT_SYMBOL(__memcpy);
+EXPORT_SYMBOL(__memmove);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcmp);
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index c0ff3ce..945bd6d 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -449,6 +449,9 @@ __mmap_switched:
str_l x21, __fdt_pointer, x5 // Save FDT pointer
str_l x24, memstart_addr, x6 // Save PHYS_OFFSET
mov x29, #0
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
b start_kernel
ENDPROC(__mmap_switched)
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index 67bf410..7d90c0f 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -21,6 +21,7 @@
#include <linux/bitops.h>
#include <linux/elf.h>
#include <linux/gfp.h>
+#include <linux/kasan.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/moduleloader.h>
@@ -34,9 +35,18 @@
void *module_alloc(unsigned long size)
{
- return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
- GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
- NUMA_NO_NODE, __builtin_return_address(0));
+ void *p;
+
+ p = __vmalloc_node_range(size, MODULE_ALIGN, MODULES_VADDR, MODULES_END,
+ GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
+ NUMA_NO_NODE, __builtin_return_address(0));
+
+ if (p && (kasan_module_alloc(p, size) < 0)) {
+ vfree(p);
+ return NULL;
+ }
+
+ return p;
}
enum aarch64_reloc_op {
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index f3067d4..bf82ab8 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -54,6 +54,7 @@
#include <asm/elf.h>
#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
+#include <asm/kasan.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/smp_plat.h>
@@ -392,6 +393,7 @@ void __init setup_arch(char **cmdline_p)
acpi_boot_table_init();
paging_init();
+ kasan_init();
request_standard_resources();
early_ioremap_reset();
diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S
index 8a9a96d..42cc4b7 100644
--- a/arch/arm64/lib/memcpy.S
+++ b/arch/arm64/lib/memcpy.S
@@ -56,6 +56,8 @@ C_h .req x12
D_l .req x13
D_h .req x14
+ .weak memcpy
+ENTRY(__memcpy)
ENTRY(memcpy)
mov dst, dstin
cmp count, #16
@@ -199,3 +201,4 @@ ENTRY(memcpy)
b.ne .Ltail63
ret
ENDPROC(memcpy)
+ENDPROC(__memcpy)
diff --git a/arch/arm64/lib/memmove.S b/arch/arm64/lib/memmove.S
index 57b19ea..8819433 100644
--- a/arch/arm64/lib/memmove.S
+++ b/arch/arm64/lib/memmove.S
@@ -57,12 +57,14 @@ C_h .req x12
D_l .req x13
D_h .req x14
+ .weak memmove
+ENTRY(__memmove)
ENTRY(memmove)
cmp dstin, src
- b.lo memcpy
+ b.lo __memcpy
add tmp1, src, count
cmp dstin, tmp1
- b.hs memcpy /* No overlap. */
+ b.hs __memcpy /* No overlap. */
add dst, dstin, count
add src, src, count
@@ -195,3 +197,4 @@ ENTRY(memmove)
b.ne .Ltail63
ret
ENDPROC(memmove)
+ENDPROC(__memmove)
diff --git a/arch/arm64/lib/memset.S b/arch/arm64/lib/memset.S
index 7c72dfd..edc0e7d 100644
--- a/arch/arm64/lib/memset.S
+++ b/arch/arm64/lib/memset.S
@@ -54,6 +54,8 @@ dst .req x8
tmp3w .req w9
tmp3 .req x9
+ .weak memset
+ENTRY(__memset)
ENTRY(memset)
mov dst, dstin /* Preserve return value. */
and A_lw, val, #255
@@ -214,3 +216,4 @@ ENTRY(memset)
b.ne .Ltail_maybe_long
ret
ENDPROC(memset)
+ENDPROC(__memset)
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
index 773d37a..57f57fd 100644
--- a/arch/arm64/mm/Makefile
+++ b/arch/arm64/mm/Makefile
@@ -4,3 +4,6 @@ obj-y := dma-mapping.o extable.o fault.o init.o \
context.o proc.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_ARM64_PTDUMP) += dump.o
+
+obj-$(CONFIG_KASAN) += kasan_init.o
+KASAN_SANITIZE_kasan_init.o := n
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
new file mode 100644
index 0000000..f1e2e47
--- /dev/null
+++ b/arch/arm64/mm/kasan_init.c
@@ -0,0 +1,165 @@
+/*
+ * This file contains kasan initialization code for ARM64.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) "kasan: " fmt
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/start_kernel.h>
+
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
+
+static void __init kasan_early_pte_populate(pmd_t *pmd, unsigned long addr,
+ unsigned long end)
+{
+ pte_t *pte;
+ unsigned long next;
+
+ if (pmd_none(*pmd))
+ pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
+
+ pte = pte_offset_kernel(pmd, addr);
+ do {
+ next = addr + PAGE_SIZE;
+ set_pte(pte, pfn_pte(virt_to_pfn(kasan_zero_page),
+ PAGE_KERNEL));
+ } while (pte++, addr = next, addr != end && pte_none(*pte));
+}
+
+static void __init kasan_early_pmd_populate(pud_t *pud,
+ unsigned long addr,
+ unsigned long end)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ if (pud_none(*pud))
+ pud_populate(&init_mm, pud, kasan_zero_pmd);
+
+ pmd = pmd_offset(pud, addr);
+ do {
+ next = pmd_addr_end(addr, end);
+ kasan_early_pte_populate(pmd, addr, next);
+ } while (pmd++, addr = next, addr != end && pmd_none(*pmd));
+}
+
+static void __init kasan_early_pud_populate(pgd_t *pgd,
+ unsigned long addr,
+ unsigned long end)
+{
+ pud_t *pud;
+ unsigned long next;
+
+ if (pgd_none(*pgd))
+ pgd_populate(&init_mm, pgd, kasan_zero_pud);
+
+ pud = pud_offset(pgd, addr);
+ do {
+ next = pud_addr_end(addr, end);
+ kasan_early_pmd_populate(pud, addr, next);
+ } while (pud++, addr = next, addr != end && pud_none(*pud));
+}
+
+static void __init kasan_map_early_shadow(void)
+{
+ unsigned long addr = KASAN_SHADOW_START;
+ unsigned long end = KASAN_SHADOW_END;
+ unsigned long next;
+ pgd_t *pgd;
+
+ pgd = pgd_offset_k(addr);
+ do {
+ next = pgd_addr_end(addr, end);
+ kasan_early_pud_populate(pgd, addr, next);
+ } while (pgd++, addr = next, addr != end);
+}
+
+void __init kasan_early_init(void)
+{
+ BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << 61));
+ BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE));
+ BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
+ kasan_map_early_shadow();
+}
+
+static void __init clear_pgds(unsigned long start,
+ unsigned long end)
+{
+ /*
+ * Remove references to kasan page tables from
+ * swapper_pg_dir. pgd_clear() can't be used
+ * here because it's nop on 2,3-level pagetable setups
+ */
+ for (; start && start < end; start += PGDIR_SIZE)
+ set_pgd(pgd_offset_k(start), __pgd(0));
+}
+
+static void __init cpu_set_ttbr1(unsigned long ttbr1)
+{
+ asm(
+ " msr ttbr1_el1, %0\n"
+ " isb"
+ :
+ : "r" (ttbr1));
+}
+
+void __init kasan_init(void)
+{
+ struct memblock_region *reg;
+
+ /*
+ * We are going to perform proper setup of shadow memory.
+ * At first we should unmap early shadow (clear_pgds() call bellow).
+ * However, instrumented code couldn't execute without shadow memory.
+ * tmp_pg_dir used to keep early shadow mapped until full shadow
+ * setup will be finished.
+ */
+ memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
+ cpu_set_ttbr1(__pa(tmp_pg_dir));
+ flush_tlb_all();
+
+ clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+ kasan_populate_zero_shadow((void *)KASAN_SHADOW_START,
+ kasan_mem_to_shadow((void *)MODULES_VADDR));
+
+ for_each_memblock(memory, reg) {
+ void *start = (void *)__phys_to_virt(reg->base);
+ void *end = (void *)__phys_to_virt(reg->base + reg->size);
+
+ if (start >= end)
+ break;
+
+ /*
+ * end + 1 here is intentional. We check several shadow bytes in
+ * advance to slightly speed up fastpath. In some rare cases
+ * we could cross boundary of mapped shadow, so we just map
+ * some more here.
+ */
+ vmemmap_populate((unsigned long)kasan_mem_to_shadow(start),
+ (unsigned long)kasan_mem_to_shadow(end) + 1,
+ pfn_to_nid(virt_to_pfn(start)));
+ }
+
+ memset(kasan_zero_page, 0, PAGE_SIZE);
+ cpu_set_ttbr1(__pa(swapper_pg_dir));
+ flush_tlb_all();
+
+ /* At this point kasan is fully initialized. Enable error messages */
+ init_task.kasan_depth = 0;
+ pr_info("Kernel address sanitizer initialized\n");
+}
--
2.4.5
From: Linus Walleij <[email protected]>
This prints out the virtual memory assigned to KASan in the
boot crawl along with other memory assignments, if and only
if KASan is activated.
Example dmesg from the Juno Development board:
Memory: 1691156K/2080768K available (5465K kernel code, 444K rwdata,
2160K rodata, 340K init, 217K bss, 373228K reserved, 16384K cma-reserved)
Virtual kernel memory layout:
kasan : 0xffffff8000000000 - 0xffffff9000000000 ( 64 GB)
vmalloc : 0xffffff9000000000 - 0xffffffbdbfff0000 ( 182 GB)
vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
0xffffffbdc2000000 - 0xffffffbdc3fc0000 ( 31 MB actual)
fixed : 0xffffffbffabfd000 - 0xffffffbffac00000 ( 12 KB)
PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB)
.init : 0xffffffc0007f5000 - 0xffffffc00084a000 ( 340 KB)
.text : 0xffffffc000080000 - 0xffffffc0007f45b4 ( 7634 KB)
.data : 0xffffffc000850000 - 0xffffffc0008bf200 ( 445 KB)
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Andrey Ryabinin <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
---
arch/arm64/mm/init.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index ad87ce8..3930692 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -298,6 +298,9 @@ void __init mem_init(void)
#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
pr_notice("Virtual kernel memory layout:\n"
+#ifdef CONFIG_KASAN
+ " kasan : 0x%16lx - 0x%16lx (%6ld GB)\n"
+#endif
" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n"
#ifdef CONFIG_SPARSEMEM_VMEMMAP
" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n"
@@ -310,6 +313,9 @@ void __init mem_init(void)
" .init : 0x%p" " - 0x%p" " (%6ld KB)\n"
" .text : 0x%p" " - 0x%p" " (%6ld KB)\n"
" .data : 0x%p" " - 0x%p" " (%6ld KB)\n",
+#ifdef CONFIG_KASAN
+ MLG(KASAN_SHADOW_START, KASAN_SHADOW_END),
+#endif
MLG(VMALLOC_START, VMALLOC_END),
#ifdef CONFIG_SPARSEMEM_VMEMMAP
MLG((unsigned long)vmemmap,
--
2.4.5
Now when we have generic kasan_populate_zero_shadow() we could
use it for x86.
Signed-off-by: Andrey Ryabinin <[email protected]>
---
arch/x86/mm/kasan_init_64.c | 109 ++------------------------------------------
1 file changed, 5 insertions(+), 104 deletions(-)
diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index 812086c..9ce5da2 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -48,106 +48,6 @@ static void __init kasan_map_early_shadow(pgd_t *pgd)
}
}
-static int __init zero_pte_populate(pmd_t *pmd, unsigned long addr,
- unsigned long end)
-{
- pte_t *pte = pte_offset_kernel(pmd, addr);
-
- while (addr + PAGE_SIZE <= end) {
- WARN_ON(!pte_none(*pte));
- set_pte(pte, __pte(__pa_nodebug(kasan_zero_page)
- | __PAGE_KERNEL_RO));
- addr += PAGE_SIZE;
- pte = pte_offset_kernel(pmd, addr);
- }
- return 0;
-}
-
-static int __init zero_pmd_populate(pud_t *pud, unsigned long addr,
- unsigned long end)
-{
- int ret = 0;
- pmd_t *pmd = pmd_offset(pud, addr);
-
- while (IS_ALIGNED(addr, PMD_SIZE) && addr + PMD_SIZE <= end) {
- WARN_ON(!pmd_none(*pmd));
- set_pmd(pmd, __pmd(__pa_nodebug(kasan_zero_pte)
- | _KERNPG_TABLE));
- addr += PMD_SIZE;
- pmd = pmd_offset(pud, addr);
- }
- if (addr < end) {
- if (pmd_none(*pmd)) {
- void *p = vmemmap_alloc_block(PAGE_SIZE, NUMA_NO_NODE);
- if (!p)
- return -ENOMEM;
- set_pmd(pmd, __pmd(__pa_nodebug(p) | _KERNPG_TABLE));
- }
- ret = zero_pte_populate(pmd, addr, end);
- }
- return ret;
-}
-
-
-static int __init zero_pud_populate(pgd_t *pgd, unsigned long addr,
- unsigned long end)
-{
- int ret = 0;
- pud_t *pud = pud_offset(pgd, addr);
-
- while (IS_ALIGNED(addr, PUD_SIZE) && addr + PUD_SIZE <= end) {
- WARN_ON(!pud_none(*pud));
- set_pud(pud, __pud(__pa_nodebug(kasan_zero_pmd)
- | _KERNPG_TABLE));
- addr += PUD_SIZE;
- pud = pud_offset(pgd, addr);
- }
-
- if (addr < end) {
- if (pud_none(*pud)) {
- void *p = vmemmap_alloc_block(PAGE_SIZE, NUMA_NO_NODE);
- if (!p)
- return -ENOMEM;
- set_pud(pud, __pud(__pa_nodebug(p) | _KERNPG_TABLE));
- }
- ret = zero_pmd_populate(pud, addr, end);
- }
- return ret;
-}
-
-static int __init zero_pgd_populate(unsigned long addr, unsigned long end)
-{
- int ret = 0;
- pgd_t *pgd = pgd_offset_k(addr);
-
- while (IS_ALIGNED(addr, PGDIR_SIZE) && addr + PGDIR_SIZE <= end) {
- WARN_ON(!pgd_none(*pgd));
- set_pgd(pgd, __pgd(__pa_nodebug(kasan_zero_pud)
- | _KERNPG_TABLE));
- addr += PGDIR_SIZE;
- pgd = pgd_offset_k(addr);
- }
-
- if (addr < end) {
- if (pgd_none(*pgd)) {
- void *p = vmemmap_alloc_block(PAGE_SIZE, NUMA_NO_NODE);
- if (!p)
- return -ENOMEM;
- set_pgd(pgd, __pgd(__pa_nodebug(p) | _KERNPG_TABLE));
- }
- ret = zero_pud_populate(pgd, addr, end);
- }
- return ret;
-}
-
-
-static void __init populate_zero_shadow(const void *start, const void *end)
-{
- if (zero_pgd_populate((unsigned long)start, (unsigned long)end))
- panic("kasan: unable to map zero shadow!");
-}
-
-
#ifdef CONFIG_KASAN_INLINE
static int kasan_die_handler(struct notifier_block *self,
unsigned long val,
@@ -199,7 +99,7 @@ void __init kasan_init(void)
clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
- populate_zero_shadow((void *)KASAN_SHADOW_START,
+ kasan_populate_zero_shadow((void *)KASAN_SHADOW_START,
kasan_mem_to_shadow((void *)PAGE_OFFSET));
for (i = 0; i < E820_X_MAX; i++) {
@@ -209,14 +109,15 @@ void __init kasan_init(void)
if (map_range(&pfn_mapped[i]))
panic("kasan: unable to allocate shadow!");
}
- populate_zero_shadow(kasan_mem_to_shadow((void *)PAGE_OFFSET + MAXMEM),
- kasan_mem_to_shadow((void *)__START_KERNEL_map));
+ kasan_populate_zero_shadow(
+ kasan_mem_to_shadow((void *)PAGE_OFFSET + MAXMEM),
+ kasan_mem_to_shadow((void *)__START_KERNEL_map));
vmemmap_populate((unsigned long)kasan_mem_to_shadow(_stext),
(unsigned long)kasan_mem_to_shadow(_end),
NUMA_NO_NODE);
- populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
+ kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
(void *)KASAN_SHADOW_END);
memset(kasan_zero_page, 0, PAGE_SIZE);
--
2.4.5
On 07/24/2015 07:41 PM, Andrey Ryabinin wrote:
> - fix memleak in kasan_populate_zero_shadow:
> Following code could leak memory when pgd_populate() is nop:
> void *p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
> pgd_populate(&init_mm, pgd, p);
It's not a leak actually, because this code is under if (pgd_none(*pgd)).
But gcc complains warns about unused variable p, so this has to be changed anyways.
> This was replaced by:
> pgd_populate(&init_mm, pgd, early_alloc(PAGE_SIZE, NUMA_NO_NODE));
> Introduce generic kasan_populate_zero_shadow(start, end).
> This function maps kasan_zero_page to the [start, end] addresses.
>
> In follow on patches it will be used for ARMv8 (and maybe other
> architectures) and will replace x86_64 specific populate_zero_shadow().
>
> Signed-off-by: Andrey Ryabinin <[email protected]>
> ---
> arch/x86/mm/kasan_init_64.c | 14 ----
> include/linux/kasan.h | 8 +++
> mm/kasan/Makefile | 2 +-
> mm/kasan/kasan_init.c | 151
++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 160 insertions(+), 15 deletions(-)
> create mode 100644 mm/kasan/kasan_init.c
>
> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
> index e1840f3..812086c 100644
> --- a/arch/x86/mm/kasan_init_64.c
> +++ b/arch/x86/mm/kasan_init_64.c
> @@ -12,20 +12,6 @@
> extern pgd_t early_level4_pgt[PTRS_PER_PGD];
> extern struct range pfn_mapped[E820_X_MAX];
>
> -static pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
> -static pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
> -static pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
> -
> -/*
> - * This page used as early shadow. We don't use empty_zero_page
> - * at early stages, stack instrumentation could write some garbage
> - * to this page.
> - * Latter we reuse it as zero shadow for large ranges of memory
> - * that allowed to access, but not instrumented by kasan
> - * (vmalloc/vmemmap ...).
> - */
> -static unsigned char kasan_zero_page[PAGE_SIZE] __page_aligned_bss;
> -
> static int __init map_range(struct range *range)
> {
> unsigned long start;
> diff --git a/include/linux/kasan.h b/include/linux/kasan.h
> index 6fb1c7d..d795f53 100644
> --- a/include/linux/kasan.h
> +++ b/include/linux/kasan.h
> @@ -12,8 +12,16 @@ struct vm_struct;
> #define KASAN_SHADOW_SCALE_SHIFT 3
>
> #include <asm/kasan.h>
> +#include <asm/pgtable.h>
> #include <linux/sched.h>
>
> +extern unsigned char kasan_zero_page[PAGE_SIZE];
> +extern pte_t kasan_zero_pte[PTRS_PER_PTE];
> +extern pmd_t kasan_zero_pmd[PTRS_PER_PMD];
> +extern pud_t kasan_zero_pud[PTRS_PER_PUD];
> +
> +void kasan_populate_zero_shadow(const void *from, const void *to);
> +
> static inline void *kasan_mem_to_shadow(const void *addr)
> {
> return (void *)((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
> diff --git a/mm/kasan/Makefile b/mm/kasan/Makefile
> index bd837b8..6471014 100644
> --- a/mm/kasan/Makefile
> +++ b/mm/kasan/Makefile
> @@ -5,4 +5,4 @@ CFLAGS_REMOVE_kasan.o = -pg
> # see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63533
> CFLAGS_kasan.o := $(call cc-option, -fno-conserve-stack
-fno-stack-protector)
>
> -obj-y := kasan.o report.o
> +obj-y := kasan.o report.o kasan_init.o
> diff --git a/mm/kasan/kasan_init.c b/mm/kasan/kasan_init.c
> new file mode 100644
> index 0000000..e276853
> --- /dev/null
> +++ b/mm/kasan/kasan_init.c
> @@ -0,0 +1,151 @@
> +/*
> + * This file contains some kasan initialization code.
> + *
> + * Copyright (c) 2015 Samsung Electronics Co., Ltd.
> + * Author: Andrey Ryabinin
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/bootmem.h>
> +#include <linux/init.h>
> +#include <linux/kasan.h>
> +#include <linux/kernel.h>
> +#include <linux/memblock.h>
> +#include <linux/pfn.h>
> +
> +#include <asm/page.h>
> +#include <asm/pgalloc.h>
> +
> +/*
> + * This page serves two purposes:
> + * - It used as early shadow memory. The entire shadow region
populated
> + * with this page, before we will be able to setup normal shadow
memory.
> + * - Latter it reused it as zero shadow to cover large ranges of
memory
> + * that allowed to access, but not handled by kasan
(vmalloc/vmemmap ...).
> + */
> +unsigned char kasan_zero_page[PAGE_SIZE] __page_aligned_bss;
> +
> +#if CONFIG_PGTABLE_LEVELS > 3
> +pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
> +#endif
> +#if CONFIG_PGTABLE_LEVELS > 2
> +pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
> +#endif
You declare kasan_zero_pud and kasan_zero_pmd conditionally now, but use
unconditionally, at least in kasan_init in patch #5. If I'm not missing
something, this is wrong...
> +pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
> +
> +static __init void *early_alloc(size_t size, int node)
> +{
> + return memblock_virt_alloc_try_nid(size, size,
__pa(MAX_DMA_ADDRESS),
> + BOOTMEM_ALLOC_ACCESSIBLE, node);
> +}
> +
> +static void __init zero_pte_populate(pmd_t *pmd, unsigned long addr,
> + unsigned long end)
> +{
> + pte_t *pte = pte_offset_kernel(pmd, addr);
> + pte_t zero_pte;
> +
> + zero_pte = pfn_pte(PFN_DOWN(__pa(kasan_zero_page)), PAGE_KERNEL);
> + zero_pte = pte_wrprotect(zero_pte);
> +
> + while (addr + PAGE_SIZE <= end) {
> + set_pte_at(&init_mm, addr, pte, zero_pte);
> + addr += PAGE_SIZE;
> + pte = pte_offset_kernel(pmd, addr);
> + }
> +}
> +
> +static void __init zero_pmd_populate(pud_t *pud, unsigned long addr,
> + unsigned long end)
Functions zero_pmd_populate, zero_pud_populate and
kasan_populate_zero_shadow
are suspiciously similar. I think we can isolate common pieces to helpers to
reduce code duplication and increase readability...
> +{
> + pmd_t *pmd = pmd_offset(pud, addr);
> + unsigned long next;
> +
> + do {
> + next = pmd_addr_end(addr, end);
> +
> + if (IS_ALIGNED(addr, PMD_SIZE) && end - addr >= PMD_SIZE) {
This line is repeated 3 times. For me, it's more than enough to
wrap it to helper (if something similar does not exist somewhere):
static inline is_whole_entry(unsigned long start, unsigned long end,
unsigned long size);
> + pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
> + continue;
> + }
> +
> + if (pmd_none(*pmd)) {
> + pmd_populate_kernel(&init_mm, pmd,
> + early_alloc(PAGE_SIZE, NUMA_NO_NODE));
> + }
> + zero_pte_populate(pmd, addr, next);
> + } while (pmd++, addr = next, addr != end);
> +}
> +
> +static void __init zero_pud_populate(pgd_t *pgd, unsigned long addr,
> + unsigned long end)
> +{
> + pud_t *pud = pud_offset(pgd, addr);
> + unsigned long next;
> +
> + do {
> + next = pud_addr_end(addr, end);
> + if (IS_ALIGNED(addr, PUD_SIZE) && end - addr >= PUD_SIZE) {
> + pmd_t *pmd;
> +
> + pud_populate(&init_mm, pud, kasan_zero_pmd);
> + pmd = pmd_offset(pud, addr);
> + pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
This three lines are repeated in kasan_populate_zero_shadow()
So, maybe you'd wrap it with some
'pud_zero_populate_whole_pmd(pud, addr)'?
> + continue;
> + }
> +
> + if (pud_none(*pud)) {
> + pud_populate(&init_mm, pud,
> + early_alloc(PAGE_SIZE, NUMA_NO_NODE));
> + }
> + zero_pmd_populate(pud, addr, next);
> + } while (pud++, addr = next, addr != end);
> +}
> +
> +/**
> + * kasan_populate_zero_shadow - populate shadow memory region with
> + * kasan_zero_page
> + * @from - start of the memory range to populate
> + * @to - end of the memory range to populate
In description and here in comment you underline that 1st parameter is
start, and second is end. But you name them finally 'from' and 'to', and
for me this names are confusing. And for you too, in so far as you add
comment explaining it. I'm not insisting, but why don't you give parameters
more straight names? (If you are worrying about internal vars naming
conflict,
just use '_start' and '_end' for them.)
> + */
> +void __init kasan_populate_zero_shadow(const void *from, const void *to)
> +{
> + unsigned long addr = (unsigned long)from;
> + unsigned long end = (unsigned long)to;
> + pgd_t *pgd = pgd_offset_k(addr);
> + unsigned long next;
> +
> + do {
> + next = pgd_addr_end(addr, end);
> +
> + if (IS_ALIGNED(addr, PGDIR_SIZE) && end - addr >= PGDIR_SIZE) {
> + pud_t *pud;
> + pmd_t *pmd;
> +
> + /*
> + * kasan_zero_pud should be populated with pmds
> + * at this moment.
> + * [pud,pmd]_populate*() below needed only for
> + * 3,2 - level page tables where we don't have
> + * puds,pmds, so pgd_populate(), pud_populate()
> + * is noops.
> + */
> + pgd_populate(&init_mm, pgd, kasan_zero_pud);
> + pud = pud_offset(pgd, addr);
> + pud_populate(&init_mm, pud, kasan_zero_pmd);
> + pmd = pmd_offset(pud, addr);
> + pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
> + continue;
> + }
> +
> + if (pgd_none(*pgd)) {
> + pgd_populate(&init_mm, pgd,
> + early_alloc(PAGE_SIZE, NUMA_NO_NODE));
> + }
> + zero_pud_populate(pgd, addr, next);
> + } while (pgd++, addr = next, addr != end);
> +}
> --
> 2.4.5
>
On Fri, Jul 24, 2015 at 07:41:57PM +0300, Andrey Ryabinin wrote:
> diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
> index 4d2a925..2cacf55 100644
> --- a/arch/arm64/Makefile
> +++ b/arch/arm64/Makefile
> @@ -40,6 +40,12 @@ else
> TEXT_OFFSET := 0x00080000
> endif
>
> +# KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - 3)) - (1 << 61)
> +KASAN_SHADOW_OFFSET := $(shell printf "0x%x\n" $$(( \
> + (-1 << $(CONFIG_ARM64_VA_BITS)) \
> + + (1 << ($(CONFIG_ARM64_VA_BITS) - 3)) \
> + - (1 << (64 - 3)) )) )
Does this work with any POSIX shell? Do we always have a 64-bit type?
As I wasn't sure about this, I suggested awk (or perl).
> +static void __init clear_pgds(unsigned long start,
> + unsigned long end)
> +{
> + /*
> + * Remove references to kasan page tables from
> + * swapper_pg_dir. pgd_clear() can't be used
> + * here because it's nop on 2,3-level pagetable setups
> + */
> + for (; start && start < end; start += PGDIR_SIZE)
> + set_pgd(pgd_offset_k(start), __pgd(0));
> +}
I don't think we need the "start" check, just "start < end". Do you
expect a start == 0 (or overflow)?
--
Catalin
On Fri, Jul 24, 2015 at 07:41:53PM +0300, Andrey Ryabinin wrote:
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index b3a1a5d..6d6dd6f 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -255,11 +255,6 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
> config ARCH_SUPPORTS_DEBUG_PAGEALLOC
> def_bool y
>
> -config KASAN_SHADOW_OFFSET
> - hex
> - depends on KASAN
> - default 0xdffffc0000000000
> -
> config HAVE_INTEL_TXT
> def_bool y
> depends on INTEL_IOMMU && ACPI
> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
> index 118e6de..c666989 100644
> --- a/arch/x86/Makefile
> +++ b/arch/x86/Makefile
> @@ -39,6 +39,8 @@ ifdef CONFIG_X86_NEED_RELOCS
> LDFLAGS_vmlinux := --emit-relocs
> endif
>
> +KASAN_SHADOW_OFFSET := 0xdffffc0000000000
To keep things simple for x86, can you not just define:
KASAN_SHADOW_OFFSET := $(CONFIG_KASAN_SHADOW_OFFSET)
or, even better, in scripts/Makefile.kasan:
KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
and set it under arch/arm64/Makefile only.
--
Catalin
On Fri, Jul 24, 2015 at 07:41:59PM +0300, Andrey Ryabinin wrote:
> Now when we have generic kasan_populate_zero_shadow() we could
> use it for x86.
>
> Signed-off-by: Andrey Ryabinin <[email protected]>
In the interest of facilitating the upstreaming of these patches (when
ready ;), can you merge this patch with 2/7? The second patch is already
touching x86, so just call it something like "x86/kasan: Generalise
kasan shadow mapping initialisation".
--
Catalin
On 07/27/2015 05:23 PM, Yury wrote:
>> +
>> +#if CONFIG_PGTABLE_LEVELS > 3
>> +pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
>> +#endif
>> +#if CONFIG_PGTABLE_LEVELS > 2
>> +pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
>> +#endif
>
> You declare kasan_zero_pud and kasan_zero_pmd conditionally now, but use
> unconditionally, at least in kasan_init in patch #5. If I'm not missing
> something, this is wrong...
>
These are used conditionally. E.g. pgd_populate() is nop if we have 2 or 3-level page tables
kasan_zero_pud will be unused (otherwise this wouldn't compile).
>> +pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
>> +
>> +static __init void *early_alloc(size_t size, int node)
>> +{
>> + return memblock_virt_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
>> + BOOTMEM_ALLOC_ACCESSIBLE, node);
>> +}
>> +
>> +static void __init zero_pte_populate(pmd_t *pmd, unsigned long addr,
>> + unsigned long end)
>> +{
>> + pte_t *pte = pte_offset_kernel(pmd, addr);
>> + pte_t zero_pte;
>> +
>> + zero_pte = pfn_pte(PFN_DOWN(__pa(kasan_zero_page)), PAGE_KERNEL);
>> + zero_pte = pte_wrprotect(zero_pte);
>> +
>> + while (addr + PAGE_SIZE <= end) {
>> + set_pte_at(&init_mm, addr, pte, zero_pte);
>> + addr += PAGE_SIZE;
>> + pte = pte_offset_kernel(pmd, addr);
>> + }
>> +}
>> +
>> +static void __init zero_pmd_populate(pud_t *pud, unsigned long addr,
>> + unsigned long end)
>
> Functions zero_pmd_populate, zero_pud_populate and kasan_populate_zero_shadow
> are suspiciously similar. I think we can isolate common pieces to helpers to
> reduce code duplication and increase readability...
>
I don't see how we could reduce duplication without hurting readability.
>> +{
>> + pmd_t *pmd = pmd_offset(pud, addr);
>> + unsigned long next;
>> +
>> + do {
>> + next = pmd_addr_end(addr, end);
>> +
>> + if (IS_ALIGNED(addr, PMD_SIZE) && end - addr >= PMD_SIZE) {
>
> This line is repeated 3 times. For me, it's more than enough to
> wrap it to helper (if something similar does not exist somewhere):
> static inline is_whole_entry(unsigned long start, unsigned long end, unsigned long size);
>
This is quite trivial one line condition, I don't think we need helper for this.
And is_whole_entry() looks like a bad name for such function.
>> + pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
>> + continue;
>> + }
>> +
>> + if (pmd_none(*pmd)) {
>> + pmd_populate_kernel(&init_mm, pmd,
>> + early_alloc(PAGE_SIZE, NUMA_NO_NODE));
>> + }
>> + zero_pte_populate(pmd, addr, next);
>> + } while (pmd++, addr = next, addr != end);
>> +}
>> +
>> +static void __init zero_pud_populate(pgd_t *pgd, unsigned long addr,
>> + unsigned long end)
>> +{
>> + pud_t *pud = pud_offset(pgd, addr);
>> + unsigned long next;
>> +
>> + do {
>> + next = pud_addr_end(addr, end);
>> + if (IS_ALIGNED(addr, PUD_SIZE) && end - addr >= PUD_SIZE) {
>> + pmd_t *pmd;
>> +
>> + pud_populate(&init_mm, pud, kasan_zero_pmd);
>> + pmd = pmd_offset(pud, addr);
>> + pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
>
> This three lines are repeated in kasan_populate_zero_shadow()
> So, maybe you'd wrap it with some
> 'pud_zero_populate_whole_pmd(pud, addr)'?
>
And I'm also disagree here. This doesn't even save any LOC, and
reviewer will have too look into this "pud_zero_populate_whole_pmd()"
to understand what it does (It's not clear from function's name).
So I think this will be worse than current code.
>> + continue;
>> + }
>> +
>> + if (pud_none(*pud)) {
>> + pud_populate(&init_mm, pud,
>> + early_alloc(PAGE_SIZE, NUMA_NO_NODE));
>> + }
>> + zero_pmd_populate(pud, addr, next);
>> + } while (pud++, addr = next, addr != end);
>> +}
>> +
>> +/**
>> + * kasan_populate_zero_shadow - populate shadow memory region with
>> + * kasan_zero_page
>> + * @from - start of the memory range to populate
>> + * @to - end of the memory range to populate
>
> In description and here in comment you underline that 1st parameter is
> start, and second is end. But you name them finally 'from' and 'to', and
> for me this names are confusing. And for you too, in so far as you add
> comment explaining it.
>
Right, I forgot to update commit description.
> I'm not insisting, but why don't you give parameters
> more straight names? (If you are worrying about internal vars naming conflict,
> just use '_start' and '_end' for them.)
>
Yes, I choose 'from', 'to' to avoid conflict with internal end variable.
But don't like this 'from', 'to', as I'm also don't like underscores, so
I think it would be better to name parameters as 'shadow_start' and 'shadow_end'.
Pretty clear and no conflicts.
On 07/27/2015 07:40 PM, Catalin Marinas wrote:
> On Fri, Jul 24, 2015 at 07:41:53PM +0300, Andrey Ryabinin wrote:
>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>> index b3a1a5d..6d6dd6f 100644
>> --- a/arch/x86/Kconfig
>> +++ b/arch/x86/Kconfig
>> @@ -255,11 +255,6 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
>> config ARCH_SUPPORTS_DEBUG_PAGEALLOC
>> def_bool y
>>
>> -config KASAN_SHADOW_OFFSET
>> - hex
>> - depends on KASAN
>> - default 0xdffffc0000000000
>> -
>> config HAVE_INTEL_TXT
>> def_bool y
>> depends on INTEL_IOMMU && ACPI
>> diff --git a/arch/x86/Makefile b/arch/x86/Makefile
>> index 118e6de..c666989 100644
>> --- a/arch/x86/Makefile
>> +++ b/arch/x86/Makefile
>> @@ -39,6 +39,8 @@ ifdef CONFIG_X86_NEED_RELOCS
>> LDFLAGS_vmlinux := --emit-relocs
>> endif
>>
>> +KASAN_SHADOW_OFFSET := 0xdffffc0000000000
>
> To keep things simple for x86, can you not just define:
>
> KASAN_SHADOW_OFFSET := $(CONFIG_KASAN_SHADOW_OFFSET)
>
> or, even better, in scripts/Makefile.kasan:
>
> KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
>
> and set it under arch/arm64/Makefile only.
>
Yes, this much better.
On 07/27/2015 07:57 PM, Catalin Marinas wrote:
> On Fri, Jul 24, 2015 at 07:41:59PM +0300, Andrey Ryabinin wrote:
>> Now when we have generic kasan_populate_zero_shadow() we could
>> use it for x86.
>>
>> Signed-off-by: Andrey Ryabinin <[email protected]>
>
> In the interest of facilitating the upstreaming of these patches (when
> ready ;), can you merge this patch with 2/7? The second patch is already
> touching x86, so just call it something like "x86/kasan: Generalise
> kasan shadow mapping initialisation".
>
Ok
On 07/27/2015 06:59 PM, Catalin Marinas wrote:
> On Fri, Jul 24, 2015 at 07:41:57PM +0300, Andrey Ryabinin wrote:
>> diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
>> index 4d2a925..2cacf55 100644
>> --- a/arch/arm64/Makefile
>> +++ b/arch/arm64/Makefile
>> @@ -40,6 +40,12 @@ else
>> TEXT_OFFSET := 0x00080000
>> endif
>>
>> +# KASAN_SHADOW_OFFSET = VA_START + (1 << (VA_BITS - 3)) - (1 << 61)
>> +KASAN_SHADOW_OFFSET := $(shell printf "0x%x\n" $$(( \
>> + (-1 << $(CONFIG_ARM64_VA_BITS)) \
>> + + (1 << ($(CONFIG_ARM64_VA_BITS) - 3)) \
>> + - (1 << (64 - 3)) )) )
>
> Does this work with any POSIX shell? Do we always have a 64-bit type?
> As I wasn't sure about this, I suggested awk (or perl).
>
Ok, It will be safer to use 32-bit arithmetic.
I've checked this on 32-bit bash, however this doesn't guarantee that it works with
any other version of bash or another shell.
>> +static void __init clear_pgds(unsigned long start,
>> + unsigned long end)
>> +{
>> + /*
>> + * Remove references to kasan page tables from
>> + * swapper_pg_dir. pgd_clear() can't be used
>> + * here because it's nop on 2,3-level pagetable setups
>> + */
>> + for (; start && start < end; start += PGDIR_SIZE)
>> + set_pgd(pgd_offset_k(start), __pgd(0));
>> +}
>
> I don't think we need the "start" check, just "start < end". Do you
> expect a start == 0 (or overflow)?
Right, we don't need this.
Andrey Ryabinin <[email protected]> writes:
> Introduce generic kasan_populate_zero_shadow(start, end).
> This function maps kasan_zero_page to the [start, end] addresses.
>
> In follow on patches it will be used for ARMv8 (and maybe other
> architectures) and will replace x86_64 specific populate_zero_shadow().
>
> Signed-off-by: Andrey Ryabinin <[email protected]>
This assume that we can have shared pgtable_t in generic code ? Is that
true for generic code ? Even if it is we may want to allow some arch to
override this ? On ppc64, we store the hardware hash page table slot
number in pte_t, Hence we won't be able to share pgtable_t.
> ---
> arch/x86/mm/kasan_init_64.c | 14 ----
> include/linux/kasan.h | 8 +++
> mm/kasan/Makefile | 2 +-
> mm/kasan/kasan_init.c | 151 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 160 insertions(+), 15 deletions(-)
> create mode 100644 mm/kasan/kasan_init.c
>
> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
> index e1840f3..812086c 100644
> --- a/arch/x86/mm/kasan_init_64.c
> +++ b/arch/x86/mm/kasan_init_64.c
> @@ -12,20 +12,6 @@
> extern pgd_t early_level4_pgt[PTRS_PER_PGD];
> extern struct range pfn_mapped[E820_X_MAX];
>
> -static pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
> -static pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
> -static pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
> -
> -/*
-aneesh
2015-08-10 9:01 GMT+03:00 Aneesh Kumar K.V <[email protected]>:
> Andrey Ryabinin <[email protected]> writes:
>
>> Introduce generic kasan_populate_zero_shadow(start, end).
>> This function maps kasan_zero_page to the [start, end] addresses.
>>
>> In follow on patches it will be used for ARMv8 (and maybe other
>> architectures) and will replace x86_64 specific populate_zero_shadow().
>>
>> Signed-off-by: Andrey Ryabinin <[email protected]>
>
> This assume that we can have shared pgtable_t in generic code ? Is that
> true for generic code ? Even if it is we may want to allow some arch to
> override this ? On ppc64, we store the hardware hash page table slot
> number in pte_t, Hence we won't be able to share pgtable_t.
>
So, ppc64 could define some config which will disable compilation of
mm/kasan/kasan_init.c.
However, it might be a bad idea to use such never defined config symbol now.
So I think this could be done later, in "KASAN for powerpc" series.
>
>
>> ---
>> arch/x86/mm/kasan_init_64.c | 14 ----
>> include/linux/kasan.h | 8 +++
>> mm/kasan/Makefile | 2 +-
>> mm/kasan/kasan_init.c | 151 ++++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 160 insertions(+), 15 deletions(-)
>> create mode 100644 mm/kasan/kasan_init.c
>>
>> diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
>> index e1840f3..812086c 100644
>> --- a/arch/x86/mm/kasan_init_64.c
>> +++ b/arch/x86/mm/kasan_init_64.c
>> @@ -12,20 +12,6 @@
>> extern pgd_t early_level4_pgt[PTRS_PER_PGD];
>> extern struct range pfn_mapped[E820_X_MAX];
>>
>> -static pud_t kasan_zero_pud[PTRS_PER_PUD] __page_aligned_bss;
>> -static pmd_t kasan_zero_pmd[PTRS_PER_PMD] __page_aligned_bss;
>> -static pte_t kasan_zero_pte[PTRS_PER_PTE] __page_aligned_bss;
>> -
>> -/*
>
> -aneesh
>