2010-12-20 10:48:52

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH v2] i.MX51 Framebuffer support

The following series adds i.MX51 framebuffer support based on the IPUv3. It
is not perfect but I decided it is good enough to open it for a wider audience
and collect first reviews. I tested this on a babbage board using both outputs
(VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
I also tested it on one custom board using a fixed display setting.

Changes since v1:

- added full overlay support for i.MX51
- more data structures protection
- IPU clock now gets disabled when unused
- many minor cleanups due to comments received from the first round.


The following changes since commit 28a4f908acb342350b9ecbfcdf0a999cb83e05aa:

ARM: mx5: check for error in ioremap (2010-12-14 09:55:53 +0100)

are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git ipuv3

Sascha Hauer (9):
ARM i.MX51: Add ipu clock support
ARM i.MX51: rename IPU irqs
Add a mfd IPUv3 driver
fb: export fb mode db table
Add i.MX5 framebuffer driver
ARM i.MX51: Add IPU device support
ARM i.MX5: Allow to increase max zone order
ARM i.MX5: increase dma consistent size for IPU support
ARM i.MX51 babbage: Add framebuffer support

arch/arm/Kconfig | 4 +-
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 74 ++
arch/arm/mach-mx5/clock-mx51-mx53.c | 140 ++++
arch/arm/mach-mx5/devices-imx51.h | 4 +
arch/arm/plat-mxc/devices/Kconfig | 4 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-imx_ipuv3.c | 47 ++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 +
arch/arm/plat-mxc/include/mach/ipu-v3.h | 49 ++
arch/arm/plat-mxc/include/mach/memory.h | 3 +-
arch/arm/plat-mxc/include/mach/mx51.h | 4 +-
drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1 +
drivers/mfd/imx-ipu-v3/Makefile | 3 +
drivers/mfd/imx-ipu-v3/ipu-common.c | 708 +++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-cpmem.c | 612 +++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dc.c | 364 +++++++++
drivers/mfd/imx-ipu-v3/ipu-di.c | 550 +++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dmfc.c | 355 +++++++++
drivers/mfd/imx-ipu-v3/ipu-dp.c | 476 ++++++++++++
drivers/mfd/imx-ipu-v3/ipu-prv.h | 216 ++++++
drivers/video/Kconfig | 11 +
drivers/video/Makefile | 1 +
drivers/video/modedb.c | 7 +-
drivers/video/mx5fb.c | 934 +++++++++++++++++++++++
include/linux/fb.h | 3 +
include/linux/mfd/imx-ipu-v3.h | 219 ++++++
28 files changed, 4802 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
create mode 100644 arch/arm/plat-mxc/include/mach/ipu-v3.h
create mode 100644 drivers/mfd/imx-ipu-v3/Makefile
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-common.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-cpmem.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-di.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dmfc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dp.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-prv.h
create mode 100644 drivers/video/mx5fb.c
create mode 100644 include/linux/mfd/imx-ipu-v3.h


2010-12-20 10:48:55

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 2/9] ARM i.MX51: rename IPU irqs

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/plat-mxc/include/mach/mx51.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index fa3a2a5..873807f 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -251,8 +251,8 @@
#define MX51_MXC_INT_IOMUX 7
#define MX51_INT_NFC 8
#define MX51_MXC_INT_VPU 9
-#define MX51_MXC_INT_IPU_ERR 10
-#define MX51_MXC_INT_IPU_SYN 11
+#define MX51_INT_IPU_ERR 10
+#define MX51_INT_IPU_SYN 11
#define MX51_MXC_INT_GPU 12
#define MX51_MXC_INT_RESV13 13
#define MX51_MXC_INT_USB_H1 14
--
1.7.2.3

2010-12-20 10:48:54

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 8/9] ARM i.MX5: increase dma consistent size for IPU support

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/plat-mxc/include/mach/memory.h | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 9a9a000..987b42a 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -40,7 +40,8 @@
# endif
#endif

-#if defined(CONFIG_MX3_VIDEO)
+#if defined(CONFIG_MX3_VIDEO) || defined(CONFIG_MFD_IMX_IPU_V3) || \
+ defined(CONFIG_MFD_IMX_IPU_V3_MODULE)
/*
* Increase size of DMA-consistent memory region.
* This is required for mx3 camera driver to capture at least two QXGA frames.
--
1.7.2.3

2010-12-20 10:49:20

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 5/9] Add i.MX5 framebuffer driver

This patch adds framebuffer support to the Freescale i.MX SoCs
equipped with an IPU v3, so far these are the i.MX50/51/53.

This driver has been tested on the i.MX51 babbage board with
both DVI and analog VGA in different resolutions and color depths.
It has also been tested on a custom i.MX51 board using a fixed
resolution panel.

Signed-off-by: Sascha Hauer <[email protected]>
---
drivers/video/Kconfig | 11 +
drivers/video/Makefile | 1 +
drivers/video/mx5fb.c | 934 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 946 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/mx5fb.c

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 27c1fb4..1901915 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2236,6 +2236,17 @@ config FB_MX3
far only synchronous displays are supported. If you plan to use
an LCD display with your i.MX31 system, say Y here.

+config FB_MX5
+ tristate "MX5 Framebuffer support"
+ depends on FB && MFD_IMX_IPU_V3
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is a framebuffer device for the i.MX51 LCD Controller. If you
+ plan to use an LCD display with your i.MX51 system, say Y here.
+
config FB_BROADSHEET
tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
depends on FB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 485e8ed..ad408d2 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
obj-$(CONFIG_FB_BFIN_LQ035Q1) += bfin-lq035q1-fb.o
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
obj-$(CONFIG_FB_MX3) += mx3fb.o
+obj-$(CONFIG_FB_MX5) += mx5fb.o
obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o

# the test framebuffer is last
diff --git a/drivers/video/mx5fb.c b/drivers/video/mx5fb.c
new file mode 100644
index 0000000..f7824c9
--- /dev/null
+++ b/drivers/video/mx5fb.c
@@ -0,0 +1,934 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Framebuffer Framebuffer Driver for SDC
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/console.h>
+#include <linux/mfd/imx-ipu-v3.h>
+#include <asm/uaccess.h>
+#include <mach/ipu-v3.h>
+
+#define DRIVER_NAME "imx-ipuv3-fb"
+
+struct imx_ipu_fb_info {
+ int ipu_channel_num;
+ struct ipu_channel *ipu_ch;
+ int dc;
+ int di_no;
+ u32 ipu_di_pix_fmt;
+ u32 ipu_in_pix_fmt;
+
+ u32 pseudo_palette[16];
+
+ struct ipu_dp *dp;
+ struct dmfc_channel *dmfc;
+ struct ipu_di *di;
+ struct fb_info *slave;
+ struct fb_info *master;
+ bool enabled;
+
+ /* overlay specific fields */
+ bool blank_state;
+ int ovlxres, ovlyres;
+};
+
+static int imx_ipu_fb_set_fix(struct fb_info *info)
+{
+ struct fb_fix_screeninfo *fix = &info->fix;
+ struct fb_var_screeninfo *var = &info->var;
+
+ fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->accel = FB_ACCEL_NONE;
+ fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+
+ return 0;
+}
+
+static int imx_ipu_fb_map_video_memory(struct fb_info *fbi)
+{
+ int size;
+
+ size = fbi->var.yres_virtual * fbi->fix.line_length;
+
+ if (fbi->screen_base) {
+ if (fbi->fix.smem_len >= size)
+ return 0;
+
+ dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+ fbi->screen_base, fbi->fix.smem_start);
+ }
+
+ fbi->screen_base = dma_alloc_writecombine(fbi->device,
+ size,
+ (dma_addr_t *)&fbi->fix.smem_start,
+ GFP_DMA);
+ if (fbi->screen_base == 0) {
+ dev_err(fbi->device, "Unable to allocate framebuffer memory (%d)\n",
+ fbi->fix.smem_len);
+ fbi->fix.smem_len = 0;
+ fbi->fix.smem_start = 0;
+ return -ENOMEM;
+ }
+
+ fbi->fix.smem_len = size;
+ fbi->screen_size = fbi->fix.smem_len;
+
+ dev_dbg(fbi->device, "allocated fb @ paddr=0x%08lx, size=%d\n",
+ fbi->fix.smem_start, fbi->fix.smem_len);
+
+ /* Clear the screen */
+ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+ return 0;
+}
+
+static void imx_ipu_fb_enable(struct fb_info *fbi)
+{
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+
+ if (mxc_fbi->enabled)
+ return;
+
+ ipu_di_enable(mxc_fbi->di);
+ ipu_dmfc_enable_channel(mxc_fbi->dmfc);
+ ipu_idmac_enable_channel(mxc_fbi->ipu_ch);
+ ipu_dc_enable_channel(mxc_fbi->dc);
+ ipu_dp_enable_channel(mxc_fbi->dp);
+ mxc_fbi->enabled = 1;
+}
+
+static void imx_ipu_fb_disable(struct fb_info *fbi)
+{
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+
+ if (!mxc_fbi->enabled)
+ return;
+
+ ipu_dp_disable_channel(mxc_fbi->dp);
+ ipu_dc_disable_channel(mxc_fbi->dc);
+ ipu_idmac_disable_channel(mxc_fbi->ipu_ch);
+ ipu_dmfc_disable_channel(mxc_fbi->dmfc);
+ ipu_di_disable(mxc_fbi->di);
+
+ mxc_fbi->enabled = 0;
+}
+
+static int calc_vref(struct fb_var_screeninfo *var)
+{
+ unsigned long htotal, vtotal;
+
+ htotal = var->xres + var->right_margin + var->hsync_len + var->left_margin;
+ vtotal = var->yres + var->lower_margin + var->vsync_len + var->upper_margin;
+
+ if (!htotal || !vtotal)
+ return 60;
+
+ return PICOS2KHZ(var->pixclock) * 1000 / vtotal / htotal;
+}
+
+static int calc_bandwidth(struct fb_var_screeninfo *var, unsigned int vref)
+{
+ return var->xres * var->yres * vref;
+}
+
+static int imx_ipu_fb_set_par(struct fb_info *fbi)
+{
+ int ret;
+ struct ipu_di_signal_cfg sig_cfg;
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+ u32 out_pixel_fmt;
+ int interlaced = 0;
+ struct fb_var_screeninfo *var = &fbi->var;
+ int enabled = mxc_fbi->enabled;
+
+ dev_dbg(fbi->device, "Reconfiguring framebuffer %dx%d-%d\n",
+ fbi->var.xres, fbi->var.yres, fbi->var.bits_per_pixel);
+
+ if (enabled)
+ imx_ipu_fb_disable(fbi);
+
+ fbi->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+ ret = imx_ipu_fb_map_video_memory(fbi);
+ if (ret)
+ return ret;
+
+ if (var->vmode & FB_VMODE_INTERLACED)
+ interlaced = 1;
+
+ memset(&sig_cfg, 0, sizeof(sig_cfg));
+ out_pixel_fmt = mxc_fbi->ipu_di_pix_fmt;
+
+ if (var->vmode & FB_VMODE_INTERLACED)
+ sig_cfg.interlaced = 1;
+ if (var->vmode & FB_VMODE_ODD_FLD_FIRST) /* PAL */
+ sig_cfg.odd_field_first = 1;
+ if (var->sync & FB_SYNC_EXT)
+ sig_cfg.ext_clk = 1;
+ if (var->sync & FB_SYNC_HOR_HIGH_ACT)
+ sig_cfg.Hsync_pol = 1;
+ if (var->sync & FB_SYNC_VERT_HIGH_ACT)
+ sig_cfg.Vsync_pol = 1;
+ if (!(var->sync & FB_SYNC_CLK_LAT_FALL))
+ sig_cfg.clk_pol = 1;
+ if (var->sync & FB_SYNC_DATA_INVERT)
+ sig_cfg.data_pol = 1;
+ if (!(var->sync & FB_SYNC_OE_LOW_ACT))
+ sig_cfg.enable_pol = 1;
+ if (var->sync & FB_SYNC_CLK_IDLE_EN)
+ sig_cfg.clkidle_en = 1;
+
+ dev_dbg(fbi->device, "pixclock = %lu.%03lu MHz\n",
+ PICOS2KHZ(var->pixclock) / 1000,
+ PICOS2KHZ(var->pixclock) % 1000);
+
+ sig_cfg.width = var->xres;
+ sig_cfg.height = var->yres;
+ sig_cfg.pixel_fmt = out_pixel_fmt;
+ sig_cfg.h_start_width = var->left_margin;
+ sig_cfg.h_sync_width = var->hsync_len;
+ sig_cfg.h_end_width = var->right_margin;
+ sig_cfg.v_start_width = var->upper_margin;
+ sig_cfg.v_sync_width = var->vsync_len;
+ sig_cfg.v_end_width = var->lower_margin;
+ sig_cfg.v_to_h_sync = 0;
+
+ if (mxc_fbi->dp) {
+ ret = ipu_dp_setup_channel(mxc_fbi->dp, mxc_fbi->ipu_in_pix_fmt,
+ out_pixel_fmt, 1);
+ if (ret) {
+ dev_dbg(fbi->device, "initializing display processor failed with %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ ret = ipu_dc_init_sync(mxc_fbi->dc, mxc_fbi->di_no, interlaced,
+ out_pixel_fmt, fbi->var.xres);
+ if (ret) {
+ dev_dbg(fbi->device, "initializing display controller failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ipu_di_init_sync_panel(mxc_fbi->di,
+ PICOS2KHZ(var->pixclock) * 1000UL,
+ &sig_cfg);
+ if (ret) {
+ dev_dbg(fbi->device, "initializing panel failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ fbi->mode = (struct fb_videomode *)fb_match_mode(var, &fbi->modelist);
+ var->xoffset = var->yoffset = 0;
+
+ if (fbi->var.vmode & FB_VMODE_INTERLACED)
+ interlaced = 1;
+
+ ret = ipu_idmac_init_channel_buffer(mxc_fbi->ipu_ch,
+ mxc_fbi->ipu_in_pix_fmt,
+ var->xres, var->yres,
+ fbi->fix.line_length,
+ IPU_ROTATE_NONE,
+ fbi->fix.smem_start,
+ 0,
+ 0, 0, interlaced);
+ if (ret) {
+ dev_dbg(fbi->device, "init channel buffer failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ipu_dmfc_init_channel(mxc_fbi->dmfc, var->xres);
+ if (ret) {
+ dev_dbg(fbi->device, "initializing dmfc channel failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ipu_dmfc_alloc_bandwidth(mxc_fbi->dmfc, calc_bandwidth(var, calc_vref(var)));
+ if (ret) {
+ dev_dbg(fbi->device, "allocating dmfc bandwidth failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ if (enabled)
+ imx_ipu_fb_enable(fbi);
+
+ return ret;
+}
+
+/*
+ * These are the bitfields for each
+ * display depth that we support.
+ */
+struct imxfb_rgb {
+ struct fb_bitfield red;
+ struct fb_bitfield green;
+ struct fb_bitfield blue;
+ struct fb_bitfield transp;
+};
+
+static struct imxfb_rgb def_rgb_8 = {
+ .red = { .offset = 5, .length = 3, },
+ .green = { .offset = 2, .length = 3, },
+ .blue = { .offset = 0, .length = 2, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
+static struct imxfb_rgb def_rgb_16 = {
+ .red = { .offset = 11, .length = 5, },
+ .green = { .offset = 5, .length = 6, },
+ .blue = { .offset = 0, .length = 5, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
+static struct imxfb_rgb def_rgb_24 = {
+ .red = { .offset = 16, .length = 8, },
+ .green = { .offset = 8, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
+static struct imxfb_rgb def_rgb_32 = {
+ .red = { .offset = 16, .length = 8, },
+ .green = { .offset = 8, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 24, .length = 8, },
+};
+
+/*
+ * Check framebuffer variable parameters and adjust to valid values.
+ *
+ * @param var framebuffer variable parameters
+ *
+ * @param info framebuffer information pointer
+ */
+static int imx_ipu_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct imx_ipu_fb_info *mxc_fbi = info->par;
+ struct imxfb_rgb *rgb;
+
+ /* we don't support xpan, force xres_virtual to be equal to xres */
+ var->xres_virtual = var->xres;
+
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+
+ switch (var->bits_per_pixel) {
+ case 8:
+ rgb = &def_rgb_8;
+ break;
+ case 16:
+ rgb = &def_rgb_16;
+ mxc_fbi->ipu_in_pix_fmt = IPU_PIX_FMT_RGB565;
+ break;
+ case 24:
+ rgb = &def_rgb_24;
+ mxc_fbi->ipu_in_pix_fmt = IPU_PIX_FMT_BGR24;
+ break;
+ case 32:
+ rgb = &def_rgb_32;
+ mxc_fbi->ipu_in_pix_fmt = IPU_PIX_FMT_BGR32;
+ break;
+ default:
+ var->bits_per_pixel = 24;
+ rgb = &def_rgb_24;
+ mxc_fbi->ipu_in_pix_fmt = IPU_PIX_FMT_BGR24;
+ }
+
+ var->red = rgb->red;
+ var->green = rgb->green;
+ var->blue = rgb->blue;
+ var->transp = rgb->transp;
+
+ return 0;
+}
+
+static inline unsigned int chan_to_field(u_int chan, struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int imx_ipu_fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int trans, struct fb_info *fbi)
+{
+ unsigned int val;
+ int ret = 1;
+
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (fbi->var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+ switch (fbi->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = fbi->pseudo_palette;
+
+ val = chan_to_field(red, &fbi->var.red);
+ val |= chan_to_field(green, &fbi->var.green);
+ val |= chan_to_field(blue, &fbi->var.blue);
+
+ pal[regno] = val;
+ ret = 0;
+ }
+ break;
+
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ break;
+ }
+
+ return ret;
+}
+
+static void imx_ipu_fb_enable_overlay(struct fb_info *fbi);
+static void imx_ipu_fb_disable_overlay(struct fb_info *fbi);
+
+static int imx_ipu_fb_blank(int blank, struct fb_info *info)
+{
+ struct imx_ipu_fb_info *mxc_fbi = info->par;
+
+ dev_dbg(info->device, "blank = %d\n", blank);
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ if (mxc_fbi->slave)
+ imx_ipu_fb_disable_overlay(mxc_fbi->slave);
+ imx_ipu_fb_disable(info);
+ break;
+ case FB_BLANK_UNBLANK:
+ imx_ipu_fb_enable(info);
+ if (mxc_fbi->slave)
+ imx_ipu_fb_enable_overlay(mxc_fbi->slave);
+ break;
+ }
+
+ return 0;
+}
+
+static int imx_ipu_fb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct imx_ipu_fb_info *mxc_fbi = info->par;
+ unsigned long base;
+ int ret;
+
+ if (info->var.yoffset == var->yoffset)
+ return 0; /* No change, do nothing */
+
+ base = var->yoffset * var->xres_virtual * var->bits_per_pixel / 8;
+ base += info->fix.smem_start;
+
+ ret = ipu_wait_for_interrupt(IPU_IRQ_EOF(mxc_fbi->ipu_channel_num), 100);
+ if (ret)
+ return ret;
+
+ if (ipu_idmac_update_channel_buffer(mxc_fbi->ipu_ch, 0, base)) {
+ dev_err(info->device,
+ "Error updating SDC buf to address=0x%08lX\n", base);
+ }
+
+ info->var.yoffset = var->yoffset;
+
+ return 0;
+}
+
+static struct fb_ops imx_ipu_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_set_par = imx_ipu_fb_set_par,
+ .fb_check_var = imx_ipu_fb_check_var,
+ .fb_setcolreg = imx_ipu_fb_setcolreg,
+ .fb_pan_display = imx_ipu_fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = imx_ipu_fb_blank,
+};
+
+/*
+ * Overlay functions
+ */
+static void imx_ipu_fb_enable_overlay(struct fb_info *fbi)
+{
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+
+ /*
+ * This function is called unconditionally from imx_ipu_fb_blank to
+ * enable/disable the overlay when the background is (un)blanked. So
+ * we decide upon blank_state whether we should actually enable the
+ * overlay.
+ */
+ if (!mxc_fbi->blank_state)
+ return;
+
+ if (mxc_fbi->enabled)
+ return;
+
+ ipu_dmfc_enable_channel(mxc_fbi->dmfc);
+ ipu_idmac_enable_channel(mxc_fbi->ipu_ch);
+ ipu_dp_enable_fg(mxc_fbi->dp);
+ mxc_fbi->enabled = 1;
+ ipu_dp_set_color_key(mxc_fbi->dp, 1, 0x434343);
+}
+
+static void imx_ipu_fb_disable_overlay(struct fb_info *fbi)
+{
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+
+ if (!mxc_fbi->enabled)
+ return;
+
+ ipu_dp_disable_fg(mxc_fbi->dp);
+ ipu_wait_for_interrupt(451, 100);
+ ipu_idmac_disable_channel(mxc_fbi->ipu_ch);
+ ipu_dmfc_disable_channel(mxc_fbi->dmfc);
+ mxc_fbi->enabled = 0;
+}
+
+#define NONSTD_TO_XPOS(x) (((x) >> 0) & 0xfff)
+#define NONSTD_TO_YPOS(x) (((x) >> 12) & 0xfff)
+#define NONSTD_TO_ALPHA(x) (((x) >> 24) & 0xff)
+
+static int imx_ipu_fb_check_var_overlay(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct imx_ipu_fb_info *mxc_fbi = info->par;
+ struct fb_info *fbi_master = mxc_fbi->master;
+ struct fb_var_screeninfo *var_master = &fbi_master->var;
+ int ret;
+ static int xpos, ypos;
+
+ xpos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_YPOS(var->nonstd);
+
+ ret = imx_ipu_fb_check_var(var, info);
+ if (ret)
+ return ret;
+
+ if (var->xres + xpos > var_master->xres)
+ return -EINVAL;
+ if (var->yres + ypos > var_master->yres)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int imx_ipu_fb_set_par_overlay(struct fb_info *fbi)
+{
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+ struct fb_var_screeninfo *var = &fbi->var;
+ struct fb_info *fbi_master = mxc_fbi->master;
+ struct imx_ipu_fb_info *mxc_fbi_master = fbi_master->par;
+ struct fb_var_screeninfo *var_master = &fbi_master->var;
+ int ret;
+ int interlaced = 0;
+ int enabled = mxc_fbi->enabled;
+ int xpos, ypos, alpha;
+ int resolution_change;
+
+ dev_dbg(fbi->device, "Reconfiguring framebuffer %dx%d-%d\n",
+ fbi->var.xres, fbi->var.yres, fbi->var.bits_per_pixel);
+
+ resolution_change = mxc_fbi->ovlxres != var->xres ||
+ mxc_fbi->ovlyres != var->yres;
+
+ if (enabled && resolution_change)
+ imx_ipu_fb_disable_overlay(fbi);
+
+ fbi->fix.line_length = var->xres_virtual *
+ var->bits_per_pixel / 8;
+
+ xpos = NONSTD_TO_XPOS(var->nonstd);
+ ypos = NONSTD_TO_YPOS(var->nonstd);
+ alpha = NONSTD_TO_ALPHA(var->nonstd);
+
+ if (resolution_change) {
+ ret = imx_ipu_fb_map_video_memory(fbi);
+ if (ret)
+ return ret;
+ }
+
+ if (!resolution_change && enabled)
+ ipu_wait_for_interrupt(IPU_IRQ_EOF(mxc_fbi_master->ipu_channel_num), 100);
+
+ ipu_dp_set_window_pos(mxc_fbi->dp, xpos, ypos);
+ ipu_dp_set_global_alpha(mxc_fbi->dp, 1, alpha, 1);
+
+ var->xoffset = var->yoffset = 0;
+
+ if (resolution_change) {
+ if (var->vmode & FB_VMODE_INTERLACED)
+ interlaced = 1;
+
+ ret = ipu_idmac_init_channel_buffer(mxc_fbi->ipu_ch,
+ mxc_fbi->ipu_in_pix_fmt,
+ var->xres, var->yres,
+ fbi->fix.line_length,
+ IPU_ROTATE_NONE,
+ fbi->fix.smem_start,
+ 0,
+ 0, 0, interlaced);
+ if (ret) {
+ dev_dbg(fbi->device, "init channel buffer failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ipu_dmfc_init_channel(mxc_fbi->dmfc, var->xres);
+ if (ret) {
+ dev_dbg(fbi->device, "initializing dmfc channel failed with %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = ipu_dmfc_alloc_bandwidth(mxc_fbi->dmfc, calc_bandwidth(var, calc_vref(var_master)));
+ if (ret) {
+ dev_dbg(fbi->device, "allocating dmfc bandwidth failed with %d\n",
+ ret);
+ return ret;
+ }
+ mxc_fbi->ovlxres = var->xres;
+ mxc_fbi->ovlyres = var->yres;
+ }
+
+ if (enabled && resolution_change)
+ imx_ipu_fb_enable_overlay(fbi);
+
+ return ret;
+}
+
+static int imx_ipu_fb_blank_overlay(int blank, struct fb_info *fbi)
+{
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+
+ dev_dbg(fbi->device, "blank = %d\n", blank);
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ mxc_fbi->blank_state = 0;
+ imx_ipu_fb_disable_overlay(fbi);
+ break;
+ case FB_BLANK_UNBLANK:
+ mxc_fbi->blank_state = 1;
+ imx_ipu_fb_enable_overlay(fbi);
+ break;
+ }
+
+ return 0;
+}
+
+static struct fb_ops imx_ipu_fb_overlay_ops = {
+ .owner = THIS_MODULE,
+ .fb_set_par = imx_ipu_fb_set_par_overlay,
+ .fb_check_var = imx_ipu_fb_check_var_overlay,
+ .fb_setcolreg = imx_ipu_fb_setcolreg,
+ .fb_pan_display = imx_ipu_fb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = imx_ipu_fb_blank_overlay,
+};
+
+static struct fb_info *imx_ipu_fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+ struct fb_info *fbi;
+ struct imx_ipu_fb_info *mxc_fbi;
+
+ fbi = framebuffer_alloc(sizeof(struct imx_ipu_fb_info), dev);
+ if (!fbi)
+ return NULL;
+
+ BUG_ON(fbi->par == NULL);
+ mxc_fbi = fbi->par;
+
+ fbi->var.activate = FB_ACTIVATE_NOW;
+
+ fbi->fbops = ops;
+ fbi->flags = FBINFO_FLAG_DEFAULT;
+ fbi->pseudo_palette = mxc_fbi->pseudo_palette;
+
+ fb_alloc_cmap(&fbi->cmap, 16, 0);
+
+ return fbi;
+}
+
+static int imx_ipu_fb_init_overlay(struct platform_device *pdev,
+ struct fb_info *fbi_master, int ipu_channel)
+{
+ struct imx_ipu_fb_info *mxc_fbi_master = fbi_master->par;
+ struct fb_info *ovlfbi;
+ struct imx_ipu_fb_info *ovl_mxc_fbi;
+ int ret;
+
+ ovlfbi = imx_ipu_fb_init_fbinfo(&pdev->dev, &imx_ipu_fb_overlay_ops);
+ if (!ovlfbi)
+ return -ENOMEM;
+
+ ovl_mxc_fbi = ovlfbi->par;
+ ovl_mxc_fbi->ipu_ch = ipu_idmac_get(ipu_channel);
+ ovl_mxc_fbi->dmfc = ipu_dmfc_get(ipu_channel);
+ ovl_mxc_fbi->di = NULL;
+ ovl_mxc_fbi->dp = mxc_fbi_master->dp;
+ ovl_mxc_fbi->master = fbi_master;
+ mxc_fbi_master->slave = ovlfbi;
+
+ ovlfbi->var.xres = 240;
+ ovlfbi->var.yres = 320;
+ ovlfbi->var.yres_virtual = ovlfbi->var.yres;
+ ovlfbi->var.xres_virtual = ovlfbi->var.xres;
+ imx_ipu_fb_check_var(&ovlfbi->var, ovlfbi);
+ imx_ipu_fb_set_fix(ovlfbi);
+
+ ret = register_framebuffer(ovlfbi);
+ if (ret) {
+ framebuffer_release(ovlfbi);
+ return ret;
+ }
+
+ ipu_dp_set_global_alpha(ovl_mxc_fbi->dp, 0, 0, 1);
+ ipu_dp_set_color_key(ovl_mxc_fbi->dp, 1, 0x434343);
+
+ imx_ipu_fb_set_par_overlay(ovlfbi);
+
+ return 0;
+}
+
+static void imx_ipu_fb_exit_overlay(struct platform_device *pdev,
+ struct fb_info *fbi_master, int ipu_channel)
+{
+ struct imx_ipu_fb_info *mxc_fbi_master = fbi_master->par;
+ struct fb_info *ovlfbi = mxc_fbi_master->slave;
+ struct imx_ipu_fb_info *ovl_mxc_fbi = ovlfbi->par;
+
+ imx_ipu_fb_blank_overlay(FB_BLANK_POWERDOWN, ovlfbi);
+
+ unregister_framebuffer(ovlfbi);
+
+ ipu_idmac_put(ovl_mxc_fbi->ipu_ch);
+ ipu_dmfc_free_bandwidth(ovl_mxc_fbi->dmfc);
+ ipu_dmfc_put(ovl_mxc_fbi->dmfc);
+
+ framebuffer_release(ovlfbi);
+}
+
+static int imx_ipu_fb_find_mode(struct fb_info *fbi)
+{
+ int ret;
+ struct fb_videomode *mode_array;
+ struct fb_modelist *modelist;
+ struct fb_var_screeninfo *var = &fbi->var;
+ int i = 0;
+
+ list_for_each_entry(modelist, &fbi->modelist, list)
+ i++;
+
+ mode_array = kmalloc(sizeof (struct fb_modelist) * i, GFP_KERNEL);
+ if (!mode_array)
+ return -ENOMEM;
+
+ i = 0;
+ list_for_each_entry(modelist, &fbi->modelist, list)
+ mode_array[i++] = modelist->mode;
+
+ ret = fb_find_mode(&fbi->var, fbi, NULL, mode_array, i, NULL, 16);
+ if (ret == 0)
+ return -EINVAL;
+
+ dev_dbg(fbi->device, "found %dx%d-%d hs:%d:%d:%d vs:%d:%d:%d\n",
+ var->xres, var->yres, var->bits_per_pixel,
+ var->hsync_len, var->left_margin, var->right_margin,
+ var->vsync_len, var->upper_margin, var->lower_margin);
+
+ kfree(mode_array);
+
+ return 0;
+}
+
+static int __devinit imx_ipu_fb_probe(struct platform_device *pdev)
+{
+ struct fb_info *fbi;
+ struct imx_ipu_fb_info *mxc_fbi;
+ struct ipuv3_fb_platform_data *plat_data = pdev->dev.platform_data;
+ int ret = 0, i;
+
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ fbi = imx_ipu_fb_init_fbinfo(&pdev->dev, &imx_ipu_fb_ops);
+ if (!fbi)
+ return -ENOMEM;
+
+ mxc_fbi = fbi->par;
+
+ mxc_fbi->ipu_channel_num = plat_data->ipu_channel_bg;
+ mxc_fbi->dc = plat_data->dc_channel;
+ mxc_fbi->ipu_di_pix_fmt = plat_data->interface_pix_fmt;
+ mxc_fbi->di_no = plat_data->display;
+
+ mxc_fbi->ipu_ch = ipu_idmac_get(plat_data->ipu_channel_bg);
+ if (IS_ERR(mxc_fbi->ipu_ch)) {
+ ret = PTR_ERR(mxc_fbi->ipu_ch);
+ goto failed_request_ipu;
+ }
+
+ mxc_fbi->dmfc = ipu_dmfc_get(plat_data->ipu_channel_bg);
+ if (IS_ERR(mxc_fbi->ipu_ch)) {
+ ret = PTR_ERR(mxc_fbi->ipu_ch);
+ goto failed_request_dmfc;
+ }
+
+ if (plat_data->dp_channel >= 0) {
+ mxc_fbi->dp = ipu_dp_get(plat_data->dp_channel);
+ if (IS_ERR(mxc_fbi->dp)) {
+ ret = PTR_ERR(mxc_fbi->ipu_ch);
+ goto failed_request_dp;
+ }
+ }
+
+ mxc_fbi->di = ipu_di_get(plat_data->display);
+ if (IS_ERR(mxc_fbi->di)) {
+ ret = PTR_ERR(mxc_fbi->di);
+ goto failed_request_di;
+ }
+
+ fbi->var.yres_virtual = fbi->var.yres;
+
+ INIT_LIST_HEAD(&fbi->modelist);
+ for (i = 0; i < plat_data->num_modes; i++)
+ fb_add_videomode(&plat_data->modes[i], &fbi->modelist);
+
+ if (plat_data->flags & IMX_IPU_FB_USE_MODEDB) {
+ for (i = 0; i < num_fb_modes; i++)
+ fb_add_videomode(&fb_modes[i], &fbi->modelist);
+ }
+
+ imx_ipu_fb_find_mode(fbi);
+
+ imx_ipu_fb_check_var(&fbi->var, fbi);
+ imx_ipu_fb_set_fix(fbi);
+ ret = register_framebuffer(fbi);
+ if (ret < 0)
+ goto failed_register;
+
+ imx_ipu_fb_set_par(fbi);
+ imx_ipu_fb_blank(FB_BLANK_UNBLANK, fbi);
+
+ if (plat_data->ipu_channel_fg >= 0 && plat_data->flags & IMX_IPU_FB_USE_OVERLAY)
+ imx_ipu_fb_init_overlay(pdev, fbi, plat_data->ipu_channel_fg);
+
+ platform_set_drvdata(pdev, fbi);
+
+ return 0;
+
+failed_register:
+ ipu_di_put(mxc_fbi->di);
+failed_request_di:
+ if (plat_data->dp_channel >= 0)
+ ipu_dp_put(mxc_fbi->dp);
+failed_request_dp:
+ ipu_dmfc_put(mxc_fbi->dmfc);
+failed_request_dmfc:
+ ipu_idmac_put(mxc_fbi->ipu_ch);
+failed_request_ipu:
+ fb_dealloc_cmap(&fbi->cmap);
+ framebuffer_release(fbi);
+
+ return ret;
+}
+
+static int __devexit imx_ipu_fb_remove(struct platform_device *pdev)
+{
+ struct fb_info *fbi = platform_get_drvdata(pdev);
+ struct imx_ipu_fb_info *mxc_fbi = fbi->par;
+ struct ipuv3_fb_platform_data *plat_data = pdev->dev.platform_data;
+
+ if (plat_data->ipu_channel_fg >= 0 && plat_data->flags & IMX_IPU_FB_USE_OVERLAY)
+ imx_ipu_fb_exit_overlay(pdev, fbi, plat_data->ipu_channel_fg);
+
+ imx_ipu_fb_blank(FB_BLANK_POWERDOWN, fbi);
+
+ dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+ fbi->screen_base, fbi->fix.smem_start);
+
+ if (&fbi->cmap)
+ fb_dealloc_cmap(&fbi->cmap);
+
+ unregister_framebuffer(fbi);
+
+ if (plat_data->dp_channel >= 0)
+ ipu_dp_put(mxc_fbi->dp);
+ ipu_dmfc_free_bandwidth(mxc_fbi->dmfc);
+ ipu_dmfc_put(mxc_fbi->dmfc);
+ ipu_di_put(mxc_fbi->di);
+ ipu_idmac_put(mxc_fbi->ipu_ch);
+
+ framebuffer_release(fbi);
+
+ return 0;
+}
+
+static struct platform_driver imx_ipu_fb_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+ .probe = imx_ipu_fb_probe,
+ .remove = __devexit_p(imx_ipu_fb_remove),
+};
+
+static int __init imx_ipu_fb_init(void)
+{
+ return platform_driver_register(&imx_ipu_fb_driver);
+}
+
+static void __exit imx_ipu_fb_exit(void)
+{
+ platform_driver_unregister(&imx_ipu_fb_driver);
+}
+
+module_init(imx_ipu_fb_init);
+module_exit(imx_ipu_fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX framebuffer driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("fb");
--
1.7.2.3

2010-12-20 10:49:19

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 3/9] Add a mfd IPUv3 driver

The IPU is the Image Processing Unit found on i.MX50/51/53 SoCs. It
features several units for image processing, this patch adds support
for the units needed for Framebuffer support, namely:

- Display Controller (dc)
- Display Interface (di)
- Display Multi Fifo Controller (dmfc)
- Display Processor (dp)
- Image DMA Controller (idmac)

This patch is based on the Freescale driver, but follows a different
approach. The Freescale code implements logical idmac channels and
the handling of the subunits is hidden in common idmac code pathes
in big switch/case statements. This patch instead just provides code
and resource management for the different subunits. The user, in this
case the framebuffer driver, decides how the different units play
together.

The IPU has other units missing in this patch:

- CMOS Sensor Interface (csi)
- Video Deinterlacer (vdi)
- Sensor Multi FIFO Controler (smfc)
- Image Converter (ic)
- Image Rotator (irt)

So expect more files to come in this directory.

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/plat-mxc/include/mach/ipu-v3.h | 49 +++
drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1 +
drivers/mfd/imx-ipu-v3/Makefile | 3 +
drivers/mfd/imx-ipu-v3/ipu-common.c | 708 +++++++++++++++++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-cpmem.c | 612 ++++++++++++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dc.c | 364 ++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-di.c | 550 ++++++++++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dmfc.c | 355 ++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-dp.c | 476 +++++++++++++++++++++
drivers/mfd/imx-ipu-v3/ipu-prv.h | 216 ++++++++++
include/linux/mfd/imx-ipu-v3.h | 219 ++++++++++
12 files changed, 3560 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-mxc/include/mach/ipu-v3.h
create mode 100644 drivers/mfd/imx-ipu-v3/Makefile
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-common.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-cpmem.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-di.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dmfc.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-dp.c
create mode 100644 drivers/mfd/imx-ipu-v3/ipu-prv.h
create mode 100644 include/linux/mfd/imx-ipu-v3.h

diff --git a/arch/arm/plat-mxc/include/mach/ipu-v3.h b/arch/arm/plat-mxc/include/mach/ipu-v3.h
new file mode 100644
index 0000000..f8900b9
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ipu-v3.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#ifndef __MACH_IPU_V3_H_
+#define __MACH_IPU_V3_H_
+
+/* IPU specific extensions to struct fb_videomode flag field */
+#define FB_SYNC_OE_LOW_ACT (1 << 8)
+#define FB_SYNC_CLK_LAT_FALL (1 << 9)
+#define FB_SYNC_DATA_INVERT (1 << 10)
+#define FB_SYNC_CLK_IDLE_EN (1 << 11)
+#define FB_SYNC_SHARP_MODE (1 << 12)
+#define FB_SYNC_SWAP_RGB (1 << 13)
+
+struct ipuv3_fb_platform_data {
+ const struct fb_videomode *modes;
+ int num_modes;
+ char *mode_str;
+ u32 interface_pix_fmt;
+
+#define IMX_IPU_FB_USE_MODEDB (1 << 0)
+#define IMX_IPU_FB_USE_OVERLAY (1 << 1)
+ unsigned long flags;
+
+ int ipu_channel_bg;
+ int ipu_channel_fg;
+ int dc_channel;
+ int dp_channel;
+ int display;
+};
+
+struct imx_ipuv3_platform_data {
+ int rev;
+ struct ipuv3_fb_platform_data *fb_head0_platform_data;
+ struct ipuv3_fb_platform_data *fb_head1_platform_data;
+};
+
+#endif /* __MACH_IPU_V3_H_ */
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3a1493b..3c81879 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -606,6 +606,13 @@ config MFD_VX855
VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
and/or vx855_gpio drivers for this to do anything useful.

+config MFD_IMX_IPU_V3
+ tristate "Support the Image Processing Unit (IPU) found on the i.MX51"
+ depends on ARCH_MX51
+ select MFD_CORE
+ help
+ Say yes here to support the IPU on i.MX51.
+
endif # MFD_SUPPORT

menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f54b365..7873b13 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_MFD_JANZ_CMODIO) += janz-cmodio.o
obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
+obj-$(CONFIG_MFD_IMX_IPU_V3) += imx-ipu-v3/
diff --git a/drivers/mfd/imx-ipu-v3/Makefile b/drivers/mfd/imx-ipu-v3/Makefile
new file mode 100644
index 0000000..ff70fe8
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MFD_IMX_IPU_V3) += imx-ipu-v3.o
+
+imx-ipu-v3-objs := ipu-common.o ipu-dc.o ipu-di.o ipu-dp.o ipu-dmfc.o ipu-cpmem.o
diff --git a/drivers/mfd/imx-ipu-v3/ipu-common.c b/drivers/mfd/imx-ipu-v3/ipu-common.c
new file mode 100644
index 0000000..d96245f
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-common.c
@@ -0,0 +1,708 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/imx-ipu-v3.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+#include <mach/common.h>
+#include <linux/mfd/core.h>
+#include <mach/ipu-v3.h>
+
+#include "ipu-prv.h"
+
+static struct clk *ipu_clk;
+static struct device *ipu_dev;
+
+static DEFINE_SPINLOCK(ipu_lock);
+static DEFINE_MUTEX(ipu_channel_lock);
+void __iomem *ipu_cm_reg;
+void __iomem *ipu_idmac_reg;
+
+static int ipu_use_count;
+
+static struct ipu_channel channels[64];
+
+struct ipu_channel *ipu_idmac_get(unsigned num)
+{
+ struct ipu_channel *channel;
+
+ dev_dbg(ipu_dev, "%s %d\n", __func__, num);
+
+ if (num > 63)
+ return ERR_PTR(-ENODEV);
+
+ mutex_lock(&ipu_channel_lock);
+
+ channel = &channels[num];
+
+ if (channel->busy) {
+ channel = ERR_PTR(-EBUSY);
+ goto out;
+ }
+
+ channel->busy = 1;
+ channel->num = num;
+
+out:
+ mutex_unlock(&ipu_channel_lock);
+
+ return channel;
+}
+EXPORT_SYMBOL(ipu_idmac_get);
+
+void ipu_idmac_put(struct ipu_channel *channel)
+{
+ dev_dbg(ipu_dev, "%s %d\n", __func__, channel->num);
+
+ mutex_lock(&ipu_channel_lock);
+
+ channel->busy = 0;
+
+ mutex_unlock(&ipu_channel_lock);
+}
+EXPORT_SYMBOL(ipu_idmac_put);
+
+void ipu_idmac_set_double_buffer(struct ipu_channel *channel, bool doublebuffer)
+{
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ reg = ipu_cm_read(IPU_CHA_DB_MODE_SEL(channel->num));
+ if (doublebuffer)
+ reg |= idma_mask(channel->num);
+ else
+ reg &= ~idma_mask(channel->num);
+ ipu_cm_write(reg, IPU_CHA_DB_MODE_SEL(channel->num));
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+}
+EXPORT_SYMBOL(ipu_idmac_set_double_buffer);
+
+int ipu_module_enable(u32 mask)
+{
+ unsigned long lock_flags;
+ u32 ipu_conf;
+
+ spin_lock_irqsave(&ipu_lock, lock_flags);
+
+ ipu_conf = ipu_cm_read(IPU_CONF);
+ ipu_conf |= mask;
+ ipu_cm_write(ipu_conf, IPU_CONF);
+
+ spin_unlock_irqrestore(&ipu_lock, lock_flags);
+
+ return 0;
+}
+
+int ipu_module_disable(u32 mask)
+{
+ unsigned long lock_flags;
+ u32 ipu_conf;
+
+ spin_lock_irqsave(&ipu_lock, lock_flags);
+
+ ipu_conf = ipu_cm_read(IPU_CONF);
+ ipu_conf &= ~mask;
+ ipu_cm_write(ipu_conf, IPU_CONF);
+
+ spin_unlock_irqrestore(&ipu_lock, lock_flags);
+
+ return 0;
+}
+
+void ipu_idmac_select_buffer(struct ipu_channel *channel, u32 buf_num)
+{
+ unsigned int chno = channel->num;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ /* Mark buffer as ready. */
+ if (buf_num == 0)
+ ipu_cm_write(idma_mask(chno), IPU_CHA_BUF0_RDY(chno));
+ else
+ ipu_cm_write(idma_mask(chno), IPU_CHA_BUF1_RDY(chno));
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+}
+EXPORT_SYMBOL(ipu_idmac_select_buffer);
+
+int ipu_idmac_enable_channel(struct ipu_channel *channel)
+{
+ u32 val;
+ unsigned long flags;
+
+ ipu_get();
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ val = ipu_idmac_read(IDMAC_CHA_EN(channel->num));
+ val |= idma_mask(channel->num);
+ ipu_idmac_write(val, IDMAC_CHA_EN(channel->num));
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_idmac_enable_channel);
+
+int ipu_idmac_disable_channel(struct ipu_channel *channel)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ /* Disable DMA channel(s) */
+ val = ipu_idmac_read(IDMAC_CHA_EN(channel->num));
+ val &= ~idma_mask(channel->num);
+ ipu_idmac_write(val, IDMAC_CHA_EN(channel->num));
+
+ /* Set channel buffers NOT to be ready */
+ ipu_cm_write(0xf0000000, IPU_GPR); /* write one to clear */
+
+ if (ipu_idma_is_set(IPU_CHA_BUF0_RDY, channel->num)) {
+ ipu_cm_write(idma_mask(channel->num),
+ IPU_CHA_BUF0_RDY(channel->num));
+ }
+ if (ipu_idma_is_set(IPU_CHA_BUF1_RDY, channel->num)) {
+ ipu_cm_write(idma_mask(channel->num),
+ IPU_CHA_BUF1_RDY(channel->num));
+ }
+
+ ipu_cm_write(0x0, IPU_GPR); /* write one to set */
+
+ /* Reset the double buffer */
+ val = ipu_cm_read(IPU_CHA_DB_MODE_SEL(channel->num));
+ val &= ~idma_mask(channel->num);
+ ipu_cm_write(val, IPU_CHA_DB_MODE_SEL(channel->num));
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+
+ ipu_put();
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_idmac_disable_channel);
+
+static LIST_HEAD(ipu_irq_handlers);
+
+static void ipu_irq_update_irq_mask(void)
+{
+ struct ipu_irq_handler *handler;
+ int i;
+
+ DECLARE_IPU_IRQ_BITMAP(irqs);
+
+ bitmap_zero(irqs, IPU_IRQ_COUNT);
+
+ list_for_each_entry(handler, &ipu_irq_handlers, list)
+ bitmap_or(irqs, irqs, handler->ipu_irqs, IPU_IRQ_COUNT);
+
+ for (i = 0; i < BITS_TO_LONGS(IPU_IRQ_COUNT); i++)
+ ipu_cm_write(irqs[i], IPU_INT_CTRL(i + 1));
+}
+
+int ipu_irq_add_handler(struct ipu_irq_handler *ipuirq)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ list_add_tail(&ipuirq->list, &ipu_irq_handlers);
+ ipu_irq_update_irq_mask();
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(ipu_irq_add_handler);
+
+void ipu_irq_remove_handler(struct ipu_irq_handler *handler)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ list_del(&handler->list);
+ ipu_irq_update_irq_mask();
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+}
+EXPORT_SYMBOL(ipu_irq_remove_handler);
+
+int ipu_irq_update_handler(struct ipu_irq_handler *handler,
+ unsigned long *bitmap)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ipu_lock, flags);
+
+ bitmap_copy(handler->ipu_irqs, bitmap, IPU_IRQ_COUNT);
+ ipu_irq_update_irq_mask();
+
+ spin_unlock_irqrestore(&ipu_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_irq_update_handler);
+
+static void ipu_completion_handler(unsigned long *bitmask, void *context)
+{
+ struct completion *completion = context;
+
+ complete(completion);
+}
+
+int ipu_wait_for_interrupt(int interrupt, int timeout_ms)
+{
+ struct ipu_irq_handler handler;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ int ret;
+
+ bitmap_zero(handler.ipu_irqs, IPU_IRQ_COUNT);
+ bitmap_set(handler.ipu_irqs, interrupt, 1);
+
+ ipu_cm_write(1 << (interrupt % 32), IPU_INT_STAT(interrupt / 32 + 1));
+
+ handler.handler = ipu_completion_handler;
+ handler.context = &completion;
+ ipu_irq_add_handler(&handler);
+
+ ret = wait_for_completion_timeout(&completion,
+ msecs_to_jiffies(timeout_ms));
+
+ ipu_irq_remove_handler(&handler);
+
+ if (ret > 0)
+ ret = 0;
+ else
+ ret = -ETIMEDOUT;
+
+ return ret;
+}
+EXPORT_SYMBOL(ipu_wait_for_interrupt);
+
+static irqreturn_t ipu_irq_handler(int irq, void *desc)
+{
+ DECLARE_IPU_IRQ_BITMAP(status);
+ struct ipu_irq_handler *handler;
+ int i;
+
+ for (i = 0; i < BITS_TO_LONGS(IPU_IRQ_COUNT); i++) {
+ status[i] = ipu_cm_read(IPU_INT_STAT(i + 1));
+ ipu_cm_write(status[i], IPU_INT_STAT(i + 1));
+ }
+
+ list_for_each_entry(handler, &ipu_irq_handlers, list) {
+ DECLARE_IPU_IRQ_BITMAP(tmp);
+ if (bitmap_and(tmp, status, handler->ipu_irqs, IPU_IRQ_COUNT))
+ handler->handler(tmp, handler->context);
+ }
+
+ return IRQ_HANDLED;
+}
+
+ipu_color_space_t format_to_colorspace(u32 fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_RGB666:
+ case IPU_PIX_FMT_RGB565:
+ case IPU_PIX_FMT_BGR24:
+ case IPU_PIX_FMT_RGB24:
+ case IPU_PIX_FMT_BGR32:
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_RGB32:
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_ABGR32:
+ case IPU_PIX_FMT_LVDS666:
+ case IPU_PIX_FMT_LVDS888:
+ return RGB;
+
+ default:
+ return YCbCr;
+ }
+}
+
+static int ipu_reset(void)
+{
+ int timeout = 10000;
+ u32 val;
+
+ /* hard reset the IPU */
+ val = readl(MX51_IO_ADDRESS(MX51_SRC_BASE_ADDR));
+ val |= 1 << 3;
+ writel(val, MX51_IO_ADDRESS(MX51_SRC_BASE_ADDR));
+
+ ipu_cm_write(0x807FFFFF, IPU_MEM_RST);
+
+ while (ipu_cm_read(IPU_MEM_RST) & 0x80000000) {
+ if (!timeout--)
+ return -ETIME;
+ udelay(100);
+ }
+
+ return 0;
+}
+
+/*
+ * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
+ * the Freescale marketing division. However this did not remove the
+ * hardware from the chip which still needs to be configured...
+ */
+static int __devinit ipu_mipi_setup(void)
+{
+ struct clk *hsc_clk;
+ void __iomem *hsc_addr;
+ int ret = 0;
+
+ hsc_addr = ioremap(MX51_MIPI_HSC_BASE_ADDR, PAGE_SIZE);
+ if (!hsc_addr)
+ return -ENOMEM;
+
+ hsc_clk = clk_get_sys(NULL, "mipi_hsp");
+ if (IS_ERR(hsc_clk)) {
+ ret = PTR_ERR(hsc_clk);
+ goto unmap;
+ }
+ clk_enable(hsc_clk);
+
+ /* setup MIPI module to legacy mode */
+ __raw_writel(0xF00, hsc_addr);
+
+ /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
+ __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
+ hsc_addr + 0x800);
+
+ clk_disable(hsc_clk);
+ clk_put(hsc_clk);
+unmap:
+ iounmap(hsc_addr);
+
+ return ret;
+}
+
+static int ipu_submodules_init(struct platform_device *pdev,
+ unsigned long ipu_base, struct clk *ipu_clk)
+{
+ char *unit;
+ int ret;
+
+ ret = ipu_di_init(pdev, 0, ipu_base + IPU_DI0_REG_BASE,
+ IPU_CONF_DI0_EN, ipu_clk);
+ if (ret) {
+ unit = "di0";
+ goto err_di_0;
+ }
+
+ ret = ipu_di_init(pdev, 1, ipu_base + IPU_DI1_REG_BASE,
+ IPU_CONF_DI1_EN, ipu_clk);
+ if (ret) {
+ unit = "di1";
+ goto err_di_1;
+ }
+
+ ret = ipu_dc_init(pdev, ipu_base + IPU_DC_REG_BASE,
+ ipu_base + IPU_DC_TMPL_REG_BASE);
+ if (ret) {
+ unit = "dc_template";
+ goto err_dc;
+ }
+
+ ret = ipu_dmfc_init(pdev, ipu_base + IPU_DMFC_REG_BASE, ipu_clk);
+ if (ret) {
+ unit = "dmfc";
+ goto err_dmfc;
+ }
+
+ ret = ipu_dp_init(pdev, ipu_base + IPU_SRM_REG_BASE);
+ if (ret) {
+ unit = "dp";
+ goto err_dp;
+ }
+
+ ret = ipu_cpmem_init(pdev, ipu_base + IPU_CPMEM_REG_BASE);
+ if (ret) {
+ unit = "cpmem";
+ goto err_cpmem;
+ }
+
+ return 0;
+
+err_cpmem:
+ ipu_dp_exit(pdev);
+err_dp:
+ ipu_dmfc_exit(pdev);
+err_dmfc:
+ ipu_dc_exit(pdev);
+err_dc:
+ ipu_di_exit(pdev, 1);
+err_di_1:
+ ipu_di_exit(pdev, 0);
+err_di_0:
+ dev_err(&pdev->dev, "init %s failed with %d\n", unit, ret);
+ return ret;
+}
+
+void ipu_get(void)
+{
+ mutex_lock(&ipu_channel_lock);
+
+ ipu_use_count++;
+
+ if (ipu_use_count == 1)
+ clk_enable(ipu_clk);
+
+ mutex_unlock(&ipu_channel_lock);
+}
+
+void ipu_put(void)
+{
+ mutex_lock(&ipu_channel_lock);
+
+ ipu_use_count--;
+
+ if (ipu_use_count == 0)
+ clk_disable(ipu_clk);
+
+ if (ipu_use_count < 0) {
+ dev_err(ipu_dev, "ipu use count < 0\n");
+ ipu_use_count = 0;
+ }
+
+ mutex_unlock(&ipu_channel_lock);
+}
+
+static void ipu_submodules_exit(struct platform_device *pdev,
+ unsigned long ipu_base)
+{
+ ipu_cpmem_exit(pdev);
+ ipu_dp_exit(pdev);
+ ipu_dmfc_exit(pdev);
+ ipu_dc_exit(pdev);
+ ipu_di_exit(pdev, 1);
+ ipu_di_exit(pdev, 0);
+}
+
+static int ipu_add_subdevice_pdata(struct platform_device *pdev,
+ const char *name, int id, void *pdata, size_t pdata_size)
+{
+ struct mfd_cell cell = {
+ .platform_data = pdata,
+ .data_size = pdata_size,
+ };
+
+ cell.name = name;
+
+ return mfd_add_devices(&pdev->dev, id, &cell, 1, NULL, 0);
+}
+
+static int ipu_add_client_devices(struct platform_device *pdev)
+{
+ struct imx_ipuv3_platform_data *plat_data = pdev->dev.platform_data;
+ struct ipuv3_fb_platform_data *fbdata;
+
+ fbdata = plat_data->fb_head0_platform_data;
+ if (fbdata) {
+ fbdata->ipu_channel_bg =
+ MX51_IPU_CHANNEL_MEM_BG_SYNC;
+ fbdata->ipu_channel_fg =
+ MX51_IPU_CHANNEL_MEM_FG_SYNC;
+ fbdata->dc_channel = 5;
+ fbdata->dp_channel = IPU_DP_FLOW_SYNC;
+
+ ipu_add_subdevice_pdata(pdev, "imx-ipuv3-fb", 0,
+ fbdata, sizeof(*fbdata));
+ }
+
+ fbdata = plat_data->fb_head1_platform_data;
+ if (fbdata) {
+ fbdata->ipu_channel_bg =
+ MX51_IPU_CHANNEL_MEM_DC_SYNC;
+ fbdata->ipu_channel_fg = -1;
+ fbdata->dc_channel = 1;
+ fbdata->dp_channel = -1;
+
+ ipu_add_subdevice_pdata(pdev, "imx-ipuv3-fb", 1,
+ fbdata, sizeof(*fbdata));
+ }
+
+ return 0;
+}
+
+static int __devinit ipu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ unsigned long ipu_base;
+ int ret, irq1, irq2;
+
+ /* There can be only one */
+ if (ipu_dev)
+ return -EBUSY;
+
+ spin_lock_init(&ipu_lock);
+
+ ipu_dev = &pdev->dev;
+
+ irq1 = platform_get_irq(pdev, 0);
+ irq2 = platform_get_irq(pdev, 1);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!res || irq1 < 0 || irq2 < 0)
+ return -ENODEV;
+
+ ipu_base = res->start;
+
+ ipu_cm_reg = ioremap(ipu_base + IPU_CM_REG_BASE, PAGE_SIZE);
+ if (!ipu_cm_reg) {
+ ret = -ENOMEM;
+ goto failed_ioremap1;
+ }
+
+ ipu_idmac_reg = ioremap(ipu_base + IPU_IDMAC_REG_BASE, PAGE_SIZE);
+ if (!ipu_idmac_reg) {
+ ret = -ENOMEM;
+ goto failed_ioremap2;
+ }
+
+ ret = ipu_mipi_setup();
+ if (ret)
+ goto failed_mipi_setup;
+
+ ipu_clk = clk_get(&pdev->dev, "ipu");
+ if (IS_ERR(ipu_clk)) {
+ ret = PTR_ERR(ipu_clk);
+ dev_err(&pdev->dev, "clk_get failed with %d", ret);
+ goto failed_clk_get;
+ }
+
+ ipu_get();
+
+ ret = request_irq(irq1, ipu_irq_handler, IRQF_DISABLED, pdev->name,
+ &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "request irq %d failed with: %d\n", irq1, ret);
+ goto failed_request_irq1;
+ }
+
+ ret = request_irq(irq2, ipu_irq_handler, IRQF_DISABLED, pdev->name,
+ &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "request irq %d failed with: %d\n", irq2, ret);
+ goto failed_request_irq2;
+ }
+
+ ipu_reset();
+
+ ret = ipu_submodules_init(pdev, ipu_base, ipu_clk);
+ if (ret)
+ goto failed_submodules_init;
+
+ /* Set sync refresh channels as high priority */
+ ipu_idmac_write(0x18800000, IDMAC_CHA_PRI(0));
+
+ ret = ipu_add_client_devices(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "adding client devices failed with %d\n", ret);
+ goto failed_add_clients;
+ }
+
+ ipu_put();
+
+ return 0;
+
+failed_add_clients:
+ ipu_submodules_exit(pdev, ipu_base);
+failed_submodules_init:
+ free_irq(irq2, &pdev->dev);
+failed_request_irq2:
+ free_irq(irq1, &pdev->dev);
+ ipu_put();
+failed_request_irq1:
+ clk_put(ipu_clk);
+failed_clk_get:
+failed_mipi_setup:
+ iounmap(ipu_idmac_reg);
+failed_ioremap2:
+ iounmap(ipu_cm_reg);
+failed_ioremap1:
+
+ return ret;
+}
+
+static int __devexit ipu_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+ unsigned long ipu_base;
+ int irq1, irq2;
+
+ irq1 = platform_get_irq(pdev, 0);
+ irq2 = platform_get_irq(pdev, 1);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ipu_base = res->start;
+
+ mfd_remove_devices(&pdev->dev);
+ ipu_submodules_exit(pdev, ipu_base);
+ free_irq(irq2, &pdev->dev);
+ free_irq(irq1, &pdev->dev);
+ iounmap(ipu_idmac_reg);
+ iounmap(ipu_cm_reg);
+
+ if (ipu_use_count != 0) {
+ dev_err(ipu_dev, "unbalanced use count: %d\n", ipu_use_count);
+ clk_disable(ipu_clk);
+ }
+
+ clk_put(ipu_clk);
+ ipu_dev = NULL;
+
+ return 0;
+}
+
+static struct platform_driver mxcipu_driver = {
+ .driver = {
+ .name = "imx-ipuv3",
+ },
+ .probe = ipu_probe,
+ .remove = __devexit_p(ipu_remove),
+};
+
+static int __init ipu_gen_init(void)
+{
+ int32_t ret;
+
+ ret = platform_driver_register(&mxcipu_driver);
+ return 0;
+}
+subsys_initcall(ipu_gen_init);
+
+static void __exit ipu_gen_uninit(void)
+{
+ platform_driver_unregister(&mxcipu_driver);
+}
+module_exit(ipu_gen_uninit);
+
+MODULE_DESCRIPTION("i.MX IPU v3 driver");
+MODULE_AUTHOR("Sascha Hauer <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/imx-ipu-v3/ipu-cpmem.c b/drivers/mfd/imx-ipu-v3/ipu-cpmem.c
new file mode 100644
index 0000000..faff5ee
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-cpmem.c
@@ -0,0 +1,612 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mfd/imx-ipu-v3.h>
+#include <linux/types.h>
+#include <linux/bitrev.h>
+#include <linux/io.h>
+
+#include "ipu-prv.h"
+
+#define __F(word, ofs, size) ((((word) * 160 + (ofs)) << 8) | (size))
+
+#define IPU_FIELD_XV __F(0, 0, 10)
+#define IPU_FIELD_YV __F(0, 10, 9)
+#define IPU_FIELD_XB __F(0, 19, 13)
+#define IPU_FIELD_YB __F(0, 32, 12)
+#define IPU_FIELD_NSB_B __F(0, 44, 1)
+#define IPU_FIELD_CF __F(0, 45, 1)
+#define IPU_FIELD_UBO __F(0, 46, 22)
+#define IPU_FIELD_VBO __F(0, 68, 22)
+#define IPU_FIELD_IOX __F(0, 90, 4)
+#define IPU_FIELD_RDRW __F(0, 94, 1)
+#define IPU_FIELD_SO __F(0, 113, 1)
+#define IPU_FIELD_BNDM __F(0, 114, 3)
+#define IPU_FIELD_BM __F(0, 117, 2)
+#define IPU_FIELD_ROT __F(0, 119, 1)
+#define IPU_FIELD_HF __F(0, 120, 1)
+#define IPU_FIELD_VF __F(0, 121, 1)
+#define IPU_FIELD_THE __F(0, 122, 1)
+#define IPU_FIELD_CAP __F(0, 123, 1)
+#define IPU_FIELD_CAE __F(0, 124, 1)
+#define IPU_FIELD_FW __F(0, 125, 13)
+#define IPU_FIELD_FH __F(0, 138, 12)
+#define IPU_FIELD_EBA0 __F(1, 0, 29)
+#define IPU_FIELD_EBA1 __F(1, 29, 29)
+#define IPU_FIELD_ILO __F(1, 58, 20)
+#define IPU_FIELD_NPB __F(1, 78, 7)
+#define IPU_FIELD_PFS __F(1, 85, 4)
+#define IPU_FIELD_ALU __F(1, 89, 1)
+#define IPU_FIELD_ALBM __F(1, 90, 3)
+#define IPU_FIELD_ID __F(1, 93, 2)
+#define IPU_FIELD_TH __F(1, 95, 7)
+#define IPU_FIELD_SLY __F(1, 102, 14)
+#define IPU_FIELD_WID3 __F(1, 125, 3)
+#define IPU_FIELD_SLUV __F(1, 128, 14)
+#define IPU_FIELD_CRE __F(1, 149, 1)
+
+#define IPU_FIELD_XV __F(0, 0, 10)
+#define IPU_FIELD_YV __F(0, 10, 9)
+#define IPU_FIELD_XB __F(0, 19, 13)
+#define IPU_FIELD_YB __F(0, 32, 12)
+#define IPU_FIELD_NSB_B __F(0, 44, 1)
+#define IPU_FIELD_CF __F(0, 45, 1)
+#define IPU_FIELD_SX __F(0, 46, 12)
+#define IPU_FIELD_SY __F(0, 58, 11)
+#define IPU_FIELD_NS __F(0, 69, 10)
+#define IPU_FIELD_SDX __F(0, 79, 7)
+#define IPU_FIELD_SM __F(0, 86, 10)
+#define IPU_FIELD_SCC __F(0, 96, 1)
+#define IPU_FIELD_SCE __F(0, 97, 1)
+#define IPU_FIELD_SDY __F(0, 98, 7)
+#define IPU_FIELD_SDRX __F(0, 105, 1)
+#define IPU_FIELD_SDRY __F(0, 106, 1)
+#define IPU_FIELD_BPP __F(0, 107, 3)
+#define IPU_FIELD_DEC_SEL __F(0, 110, 2)
+#define IPU_FIELD_DIM __F(0, 112, 1)
+#define IPU_FIELD_SO __F(0, 113, 1)
+#define IPU_FIELD_BNDM __F(0, 114, 3)
+#define IPU_FIELD_BM __F(0, 117, 2)
+#define IPU_FIELD_ROT __F(0, 119, 1)
+#define IPU_FIELD_HF __F(0, 120, 1)
+#define IPU_FIELD_VF __F(0, 121, 1)
+#define IPU_FIELD_THE __F(0, 122, 1)
+#define IPU_FIELD_CAP __F(0, 123, 1)
+#define IPU_FIELD_CAE __F(0, 124, 1)
+#define IPU_FIELD_FW __F(0, 125, 13)
+#define IPU_FIELD_FH __F(0, 138, 12)
+#define IPU_FIELD_EBA0 __F(1, 0, 29)
+#define IPU_FIELD_EBA1 __F(1, 29, 29)
+#define IPU_FIELD_ILO __F(1, 58, 20)
+#define IPU_FIELD_NPB __F(1, 78, 7)
+#define IPU_FIELD_PFS __F(1, 85, 4)
+#define IPU_FIELD_ALU __F(1, 89, 1)
+#define IPU_FIELD_ALBM __F(1, 90, 3)
+#define IPU_FIELD_ID __F(1, 93, 2)
+#define IPU_FIELD_TH __F(1, 95, 7)
+#define IPU_FIELD_SL __F(1, 102, 14)
+#define IPU_FIELD_WID0 __F(1, 116, 3)
+#define IPU_FIELD_WID1 __F(1, 119, 3)
+#define IPU_FIELD_WID2 __F(1, 122, 3)
+#define IPU_FIELD_WID3 __F(1, 125, 3)
+#define IPU_FIELD_OFS0 __F(1, 128, 5)
+#define IPU_FIELD_OFS1 __F(1, 133, 5)
+#define IPU_FIELD_OFS2 __F(1, 138, 5)
+#define IPU_FIELD_OFS3 __F(1, 143, 5)
+#define IPU_FIELD_SXYS __F(1, 148, 1)
+#define IPU_FIELD_CRE __F(1, 149, 1)
+#define IPU_FIELD_DEC_SEL2 __F(1, 150, 1)
+
+static u32 *ipu_cpmem_base;
+static struct device *ipu_dev;
+
+struct ipu_ch_param_word {
+ u32 data[5];
+ u32 res[3];
+};
+
+struct ipu_ch_param {
+ struct ipu_ch_param_word word[2];
+};
+
+static u32 ipu_bytes_per_pixel(u32 fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_GENERIC: /* generic data */
+ case IPU_PIX_FMT_RGB332:
+ case IPU_PIX_FMT_YUV420P:
+ case IPU_PIX_FMT_YUV422P:
+ return 1;
+
+ case IPU_PIX_FMT_RGB565:
+ case IPU_PIX_FMT_YUYV:
+ case IPU_PIX_FMT_UYVY:
+ return 2;
+
+ case IPU_PIX_FMT_BGR24:
+ case IPU_PIX_FMT_RGB24:
+ return 3;
+
+ case IPU_PIX_FMT_GENERIC_32: /* generic data */
+ case IPU_PIX_FMT_BGR32:
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_RGB32:
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_ABGR32:
+ return 4;
+
+ default:
+ return 1;
+ }
+}
+
+bool ipu_pixel_format_has_alpha(u32 fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_ABGR32:
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+#define ipu_ch_param_addr(ch) (((struct ipu_ch_param *)ipu_cpmem_base) + (ch))
+
+static inline void ipu_ch_param_set_field(struct ipu_ch_param *base, u32 wbs, u32 v)
+{
+ u32 bit = (wbs >> 8) % 160;
+ u32 size = wbs & 0xff;
+ u32 word = (wbs >> 8) / 160;
+ u32 i = bit / 32;
+ u32 ofs = bit % 32;
+ u32 mask = (1 << size) - 1;
+
+ pr_debug("%s %d %d %d\n", __func__, word, bit , size);
+
+ base->word[word].data[i] &= ~(mask << ofs);
+ base->word[word].data[i] |= v << ofs;
+
+ if ((bit + size - 1) / 32 > i) {
+ base->word[word].data[i + 1] &= ~(v >> (mask ? (32 - ofs) : 0));
+ base->word[word].data[i + 1] |= v >> (ofs ? (32 - ofs) : 0);
+ }
+}
+
+static inline u32 ipu_ch_param_read_field(struct ipu_ch_param *base, u32 wbs)
+{
+ u32 bit = (wbs >> 8) % 160;
+ u32 size = wbs & 0xff;
+ u32 word = (wbs >> 8) / 160;
+ u32 i = bit / 32;
+ u32 ofs = bit % 32;
+ u32 mask = (1 << size) - 1;
+ u32 val = 0;
+
+ pr_debug("%s %d %d %d\n", __func__, word, bit , size);
+
+ val = (base->word[word].data[i] >> ofs) & mask;
+
+ if ((bit + size - 1) / 32 > i) {
+ u32 tmp;
+ tmp = base->word[word].data[i + 1];
+ tmp &= mask >> (ofs ? (32 - ofs) : 0);
+ val |= tmp << (ofs ? (32 - ofs) : 0);
+ }
+
+ return val;
+}
+
+static inline void ipu_ch_params_set_packing(struct ipu_ch_param *p,
+ int red_width, int red_offset,
+ int green_width, int green_offset,
+ int blue_width, int blue_offset,
+ int alpha_width, int alpha_offset)
+{
+ /* Setup red width and offset */
+ ipu_ch_param_set_field(p, IPU_FIELD_WID0, red_width - 1);
+ ipu_ch_param_set_field(p, IPU_FIELD_OFS0, red_offset);
+ /* Setup green width and offset */
+ ipu_ch_param_set_field(p, IPU_FIELD_WID1, green_width - 1);
+ ipu_ch_param_set_field(p, IPU_FIELD_OFS1, green_offset);
+ /* Setup blue width and offset */
+ ipu_ch_param_set_field(p, IPU_FIELD_WID2, blue_width - 1);
+ ipu_ch_param_set_field(p, IPU_FIELD_OFS2, blue_offset);
+ /* Setup alpha width and offset */
+ ipu_ch_param_set_field(p, IPU_FIELD_WID3, alpha_width - 1);
+ ipu_ch_param_set_field(p, IPU_FIELD_OFS3, alpha_offset);
+}
+
+static inline void ipu_ch_param_dump(int ch)
+{
+ struct ipu_ch_param *p = ipu_ch_param_addr(ch);
+ pr_debug("ch %d word 0 - %08X %08X %08X %08X %08X\n", ch,
+ p->word[0].data[0], p->word[0].data[1], p->word[0].data[2],
+ p->word[0].data[3], p->word[0].data[4]);
+ pr_debug("ch %d word 1 - %08X %08X %08X %08X %08X\n", ch,
+ p->word[1].data[0], p->word[1].data[1], p->word[1].data[2],
+ p->word[1].data[3], p->word[1].data[4]);
+ pr_debug("PFS 0x%x\n", ipu_ch_param_read_field(p, IPU_FIELD_PFS));
+ pr_debug("BPP 0x%x\n", ipu_ch_param_read_field(p, IPU_FIELD_BPP));
+ pr_debug("NPB 0x%x\n", ipu_ch_param_read_field(p, IPU_FIELD_NPB));
+
+ pr_debug("FW %d\n", ipu_ch_param_read_field(p, IPU_FIELD_FW));
+ pr_debug("FH %d\n", ipu_ch_param_read_field(p, IPU_FIELD_FH));
+ pr_debug("Stride %d\n", ipu_ch_param_read_field(p, IPU_FIELD_SL));
+
+ pr_debug("Width0 %d+1\n", ipu_ch_param_read_field(p, IPU_FIELD_WID0));
+ pr_debug("Width1 %d+1\n", ipu_ch_param_read_field(p, IPU_FIELD_WID1));
+ pr_debug("Width2 %d+1\n", ipu_ch_param_read_field(p, IPU_FIELD_WID2));
+ pr_debug("Width3 %d+1\n", ipu_ch_param_read_field(p, IPU_FIELD_WID3));
+ pr_debug("Offset0 %d\n", ipu_ch_param_read_field(p, IPU_FIELD_OFS0));
+ pr_debug("Offset1 %d\n", ipu_ch_param_read_field(p, IPU_FIELD_OFS1));
+ pr_debug("Offset2 %d\n", ipu_ch_param_read_field(p, IPU_FIELD_OFS2));
+ pr_debug("Offset3 %d\n", ipu_ch_param_read_field(p, IPU_FIELD_OFS3));
+}
+
+static inline void ipu_ch_param_set_burst_size(u32 ch,
+ u16 burst_pixels)
+{
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_NPB,
+ burst_pixels - 1);
+};
+
+static inline int ipu_ch_param_get_burst_size(u32 ch)
+{
+ return ipu_ch_param_read_field(ipu_ch_param_addr(ch), IPU_FIELD_NPB) + 1;
+};
+
+static inline int ipu_ch_param_get_bpp(u32 ch)
+{
+ return ipu_ch_param_read_field(ipu_ch_param_addr(ch), IPU_FIELD_BPP);
+};
+
+static inline void ipu_ch_param_set_buffer(u32 ch, int bufNum,
+ dma_addr_t phyaddr)
+{
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch),
+ bufNum ? IPU_FIELD_EBA1 : IPU_FIELD_EBA0,
+ phyaddr / 8);
+};
+
+#define IPU_FIELD_ROT_HF_VF __F(0, 119, 3)
+
+static inline void ipu_ch_param_set_rotation(u32 ch,
+ ipu_rotate_mode_t rot)
+{
+ u32 temp_rot = bitrev8(rot) >> 5;
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_ROT_HF_VF, temp_rot);
+};
+
+static inline void ipu_ch_param_set_block_mode(u32 ch)
+{
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_BM, 1);
+};
+
+static inline void ipu_ch_param_set_alpha_use_separate_channel(u32 ch,
+ bool option)
+{
+ if (option)
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_ALU, 1);
+ else
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_ALU, 0);
+};
+
+static inline void ipu_ch_param_set_alpha_condition_read(u32 ch)
+{
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_CRE, 1);
+};
+
+static inline void ipu_ch_param_set_alpha_buffer_memory(u32 ch)
+{
+ int alp_mem_idx;
+
+ switch (ch) {
+ case 14: /* PRP graphic */
+ alp_mem_idx = 0;
+ break;
+ case 15: /* PP graphic */
+ alp_mem_idx = 1;
+ break;
+ case 23: /* DP BG SYNC graphic */
+ alp_mem_idx = 4;
+ break;
+ case 27: /* DP FG SYNC graphic */
+ alp_mem_idx = 2;
+ break;
+ default:
+ dev_err(ipu_dev, "unsupported correlated channel of local alpha channel\n");
+ return;
+ }
+
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_ALBM, alp_mem_idx);
+};
+
+static inline void ipu_ch_param_set_interlaced_scan(u32 ch)
+{
+ u32 stride;
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_SO, 1);
+ stride = ipu_ch_param_read_field(ipu_ch_param_addr(ch), IPU_FIELD_SL) + 1;
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_ILO, stride / 8);
+ stride *= 2;
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_SLY, stride - 1);
+};
+
+static inline void ipu_ch_param_set_high_priority(u32 ch)
+{
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_ID, 1);
+};
+
+static inline void ipu_ch_params_set_alpha_width(u32 ch, int alpha_width)
+{
+ ipu_ch_param_set_field(ipu_ch_param_addr(ch), IPU_FIELD_WID3,
+ alpha_width - 1);
+}
+
+static int ipu_ch_param_init(int ch,
+ u32 pixel_fmt, u32 width,
+ u32 height, u32 stride,
+ u32 u, u32 v,
+ u32 uv_stride, dma_addr_t addr0,
+ dma_addr_t addr1)
+{
+ u32 u_offset = 0;
+ u32 v_offset = 0;
+ struct ipu_ch_param params;
+
+ memset(&params, 0, sizeof(params));
+
+ ipu_ch_param_set_field(&params, IPU_FIELD_FW, width - 1);
+ ipu_ch_param_set_field(&params, IPU_FIELD_FH, height - 1);
+ ipu_ch_param_set_field(&params, IPU_FIELD_SLY, stride - 1);
+ ipu_ch_param_set_field(&params, IPU_FIELD_EBA0, addr0 >> 3);
+ ipu_ch_param_set_field(&params, IPU_FIELD_EBA1, addr1 >> 3);
+
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_GENERIC:
+ /* Represents 8-bit Generic data */
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 5); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 6); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 63); /* burst size */
+
+ break;
+ case IPU_PIX_FMT_GENERIC_32:
+ /* Represents 32-bit Generic data */
+ break;
+ case IPU_PIX_FMT_RGB565:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 3); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 7); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 15); /* burst size */
+
+ ipu_ch_params_set_packing(&params, 5, 0, 6, 5, 5, 11, 8, 16);
+ break;
+ case IPU_PIX_FMT_BGR24:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 1); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 7); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 19); /* burst size */
+
+ ipu_ch_params_set_packing(&params, 8, 0, 8, 8, 8, 16, 8, 24);
+ break;
+ case IPU_PIX_FMT_RGB24:
+ case IPU_PIX_FMT_YUV444:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 1); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 7); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 19); /* burst size */
+
+ ipu_ch_params_set_packing(&params, 8, 16, 8, 8, 8, 0, 8, 24);
+ break;
+ case IPU_PIX_FMT_BGRA32:
+ case IPU_PIX_FMT_BGR32:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 0); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 7); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 15); /* burst size */
+
+ ipu_ch_params_set_packing(&params, 8, 8, 8, 16, 8, 24, 8, 0);
+ break;
+ case IPU_PIX_FMT_RGBA32:
+ case IPU_PIX_FMT_RGB32:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 0); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 7); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 15); /* burst size */
+
+ ipu_ch_params_set_packing(&params, 8, 24, 8, 16, 8, 8, 8, 0);
+ break;
+ case IPU_PIX_FMT_ABGR32:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 0); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 7); /* pix format */
+
+ ipu_ch_params_set_packing(&params, 8, 0, 8, 8, 8, 16, 8, 24);
+ break;
+ case IPU_PIX_FMT_UYVY:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 3); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 0xA); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 15); /* burst size */
+ break;
+ case IPU_PIX_FMT_YUYV:
+ ipu_ch_param_set_field(&params, IPU_FIELD_BPP, 3); /* bits/pixel */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 0x8); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 31); /* burst size */
+ break;
+ case IPU_PIX_FMT_YUV420P2:
+ case IPU_PIX_FMT_YUV420P:
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 2); /* pix format */
+
+ if (uv_stride < stride / 2)
+ uv_stride = stride / 2;
+
+ u_offset = stride * height;
+ v_offset = u_offset + (uv_stride * height / 2);
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 31); /* burst size */
+ break;
+ case IPU_PIX_FMT_YVU422P:
+ /* BPP & pixel format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 1); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 31); /* burst size */
+
+ if (uv_stride < stride / 2)
+ uv_stride = stride / 2;
+
+ v_offset = (v == 0) ? stride * height : v;
+ u_offset = (u == 0) ? v_offset + v_offset / 2 : u;
+ break;
+ case IPU_PIX_FMT_YUV422P:
+ /* BPP & pixel format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 1); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 31); /* burst size */
+
+ if (uv_stride < stride / 2)
+ uv_stride = stride / 2;
+
+ u_offset = (u == 0) ? stride * height : u;
+ v_offset = (v == 0) ? u_offset + u_offset / 2 : v;
+ break;
+ case IPU_PIX_FMT_NV12:
+ /* BPP & pixel format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_PFS, 4); /* pix format */
+ ipu_ch_param_set_field(&params, IPU_FIELD_NPB, 31); /* burst size */
+ uv_stride = stride;
+ u_offset = (u == 0) ? stride * height : u;
+ break;
+ default:
+ dev_err(ipu_dev, "mxc ipu: unimplemented pixel format: %d\n",
+ pixel_fmt);
+ return -EINVAL;
+ }
+ /* set burst size to 16 */
+ if (uv_stride)
+ ipu_ch_param_set_field(&params, IPU_FIELD_SLUV, uv_stride - 1);
+
+ if (u > u_offset)
+ u_offset = u;
+
+ if (v > v_offset)
+ v_offset = v;
+
+ ipu_ch_param_set_field(&params, IPU_FIELD_UBO, u_offset / 8);
+ ipu_ch_param_set_field(&params, IPU_FIELD_VBO, v_offset / 8);
+
+ pr_debug("initializing idma ch %d @ %p\n", ch, ipu_ch_param_addr(ch));
+ memcpy(ipu_ch_param_addr(ch), &params, sizeof(params));
+ return 0;
+}
+
+/*
+ * This function is called to initialize a buffer for a IPU channel.
+ *
+ * @param channel The IPU channel.
+ *
+ * @param pixel_fmt Input parameter for pixel format of buffer.
+ * Pixel format is a FOURCC ASCII code.
+ *
+ * @param width Input parameter for width of buffer in pixels.
+ *
+ * @param height Input parameter for height of buffer in pixels.
+ *
+ * @param stride Input parameter for stride length of buffer
+ * in pixels.
+ *
+ * @param rot_mode Input parameter for rotation setting of buffer.
+ * A rotation setting other than
+ * IPU_ROTATE_VERT_FLIP
+ * should only be used for input buffers of
+ * rotation channels.
+ *
+ * @param phyaddr_0 Input parameter buffer 0 physical address.
+ *
+ * @param phyaddr_1 Input parameter buffer 1 physical address.
+ * Setting this to a value other than NULL enables
+ * double buffering mode.
+ *
+ * @param u private u offset for additional cropping,
+ * zero if not used.
+ *
+ * @param v private v offset for additional cropping,
+ * zero if not used.
+ *
+ * @return Returns 0 on success or negative error code on fail
+ */
+int ipu_idmac_init_channel_buffer(struct ipu_channel *channel,
+ u32 pixel_fmt,
+ u16 width, u16 height,
+ u32 stride,
+ ipu_rotate_mode_t rot_mode,
+ dma_addr_t phyaddr_0, dma_addr_t phyaddr_1,
+ u32 u, u32 v, bool interlaced)
+{
+ int ret = 0;
+ u32 dma_chan = channel->num;
+
+ if (stride < width * ipu_bytes_per_pixel(pixel_fmt))
+ stride = width * ipu_bytes_per_pixel(pixel_fmt);
+
+ if (stride % 4) {
+ dev_err(ipu_dev,
+ "Stride not 32-bit aligned, stride = %d\n", stride);
+ return -EINVAL;
+ }
+
+ ipu_get();
+
+ /* Build parameter memory data for DMA channel */
+ ret = ipu_ch_param_init(dma_chan, pixel_fmt, width, height, stride, u, v, 0,
+ phyaddr_0, phyaddr_1);
+ if (ret)
+ goto out;
+
+ if (rot_mode)
+ ipu_ch_param_set_rotation(dma_chan, rot_mode);
+
+ if (interlaced)
+ ipu_ch_param_set_interlaced_scan(dma_chan);
+
+ if (idmac_idma_is_set(IDMAC_CHA_PRI, dma_chan))
+ ipu_ch_param_set_high_priority(dma_chan);
+
+ ipu_ch_param_dump(dma_chan);
+out:
+ ipu_put();
+
+ return ret;
+}
+EXPORT_SYMBOL(ipu_idmac_init_channel_buffer);
+
+int ipu_idmac_update_channel_buffer(struct ipu_channel *channel,
+ u32 buf_num, dma_addr_t phyaddr)
+{
+ u32 dma_chan = channel->num;
+
+ ipu_ch_param_set_buffer(dma_chan, buf_num, phyaddr);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_idmac_update_channel_buffer);
+
+int ipu_cpmem_init(struct platform_device *pdev, unsigned long base)
+{
+ ipu_cpmem_base = ioremap(base, PAGE_SIZE);
+ if (!ipu_cpmem_base)
+ return -ENOMEM;
+ ipu_dev = &pdev->dev;
+ return 0;
+}
+
+void ipu_cpmem_exit(struct platform_device *pdev)
+{
+ iounmap(ipu_cpmem_base);
+}
diff --git a/drivers/mfd/imx-ipu-v3/ipu-dc.c b/drivers/mfd/imx-ipu-v3/ipu-dc.c
new file mode 100644
index 0000000..b8c601e
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-dc.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/imx-ipu-v3.h>
+
+#include "ipu-prv.h"
+
+#define ASYNC_SER_WAVE 6
+
+#define DC_DISP_ID_SERIAL 2
+#define DC_DISP_ID_ASYNC 3
+
+#define DC_MAP_CONF_PTR(n) (ipu_dc_reg + 0x0108 + ((n) & ~0x1) * 2)
+#define DC_MAP_CONF_VAL(n) (ipu_dc_reg + 0x0144 + ((n) & ~0x1) * 2)
+
+#define DC_EVT_NF 0
+#define DC_EVT_NL 1
+#define DC_EVT_EOF 2
+#define DC_EVT_NFIELD 3
+#define DC_EVT_EOL 4
+#define DC_EVT_EOFIELD 5
+#define DC_EVT_NEW_ADDR 6
+#define DC_EVT_NEW_CHAN 7
+#define DC_EVT_NEW_DATA 8
+
+#define DC_EVT_NEW_ADDR_W_0 0
+#define DC_EVT_NEW_ADDR_W_1 1
+#define DC_EVT_NEW_CHAN_W_0 2
+#define DC_EVT_NEW_CHAN_W_1 3
+#define DC_EVT_NEW_DATA_W_0 4
+#define DC_EVT_NEW_DATA_W_1 5
+#define DC_EVT_NEW_ADDR_R_0 6
+#define DC_EVT_NEW_ADDR_R_1 7
+#define DC_EVT_NEW_CHAN_R_0 8
+#define DC_EVT_NEW_CHAN_R_1 9
+#define DC_EVT_NEW_DATA_R_0 10
+#define DC_EVT_NEW_DATA_R_1 11
+
+#define DC_WR_CH_CONF(ch) (ipu_dc_reg + dc_channels[ch].channel_offset)
+#define DC_WR_CH_ADDR(ch) (ipu_dc_reg + dc_channels[ch].channel_offset + 4)
+#define DC_RL_CH(ch, evt) (ipu_dc_reg + dc_channels[ch].channel_offset + 8 + ((evt) & ~0x1) * 2)
+
+#define DC_GEN (ipu_dc_reg + 0x00D4)
+#define DC_DISP_CONF1(disp) (ipu_dc_reg + 0x00D8 + disp * 4)
+#define DC_DISP_CONF2(disp) (ipu_dc_reg + 0x00E8 + disp * 4)
+#define DC_STAT (ipu_dc_reg + 0x01C8)
+
+#define WROD(lf) (0x18 | (lf << 1))
+
+#define DC_WR_CH_CONF_FIELD_MODE (1 << 9)
+#define DC_WR_CH_CONF_PROG_TYPE_OFFSET 5
+#define DC_WR_CH_CONF_PROG_TYPE_MASK (7 << 5)
+#define DC_WR_CH_CONF_PROG_DI_ID (1 << 2)
+#define DC_WR_CH_CONF_PROG_DISP_ID_OFFSET 3
+#define DC_WR_CH_CONF_PROG_DISP_ID_MASK (3 << 3)
+
+static void __iomem *ipu_dc_reg;
+static void __iomem *ipu_dc_tmpl_reg;
+static struct device *ipu_dev;
+
+struct ipu_dc {
+ unsigned int di; /* The display interface number assigned to this dc channel */
+ unsigned int channel_offset;
+};
+
+static struct ipu_dc dc_channels[10];
+
+static void ipu_dc_link_event(int chan, int event, int addr, int priority)
+{
+ u32 reg;
+
+ reg = __raw_readl(DC_RL_CH(chan, event));
+ reg &= ~(0xFFFF << (16 * (event & 0x1)));
+ reg |= ((addr << 8) | priority) << (16 * (event & 0x1));
+ __raw_writel(reg, DC_RL_CH(chan, event));
+}
+
+static void ipu_dc_write_tmpl(int word, u32 opcode, u32 operand, int map,
+ int wave, int glue, int sync)
+{
+ u32 reg;
+ int stop = 1;
+
+ reg = sync;
+ reg |= (glue << 4);
+ reg |= (++wave << 11);
+ reg |= (++map << 15);
+ reg |= (operand << 20) & 0xFFF00000;
+ __raw_writel(reg, ipu_dc_tmpl_reg + word * 8);
+
+ reg = (operand >> 12);
+ reg |= opcode << 4;
+ reg |= (stop << 9);
+ __raw_writel(reg, ipu_dc_tmpl_reg + word * 8 + 4);
+}
+
+static int ipu_pixfmt_to_map(u32 fmt)
+{
+ switch (fmt) {
+ case IPU_PIX_FMT_GENERIC:
+ case IPU_PIX_FMT_RGB24:
+ return 0;
+ case IPU_PIX_FMT_RGB666:
+ return 1;
+ case IPU_PIX_FMT_YUV444:
+ return 2;
+ case IPU_PIX_FMT_RGB565:
+ return 3;
+ case IPU_PIX_FMT_LVDS666:
+ return 4;
+ }
+
+ return -EINVAL;
+}
+
+#define SYNC_WAVE 0
+
+int ipu_dc_init_sync(int dc_chan, int di, bool interlaced, u32 pixel_fmt, u32 width)
+{
+ u32 reg = 0, map;
+
+ dc_channels[dc_chan].di = di;
+
+ map = ipu_pixfmt_to_map(pixel_fmt);
+ if (map < 0) {
+ dev_dbg(ipu_dev, "IPU_DISP: No MAP\n");
+ return -EINVAL;
+ }
+
+ ipu_get();
+
+ if (interlaced) {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 0, 3);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 0, 2);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 0, 1);
+
+ /* Init template microcode */
+ ipu_dc_write_tmpl(0, WROD(0), 0, map, SYNC_WAVE, 0, 8);
+ } else {
+ if (di) {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 2, 3);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 3, 2);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 4, 1);
+ /* Init template microcode */
+ ipu_dc_write_tmpl(2, WROD(0), 0, map, SYNC_WAVE, 8, 5);
+ ipu_dc_write_tmpl(3, WROD(0), 0, map, SYNC_WAVE, 4, 5);
+ ipu_dc_write_tmpl(4, WROD(0), 0, map, SYNC_WAVE, 0, 5);
+ } else {
+ ipu_dc_link_event(dc_chan, DC_EVT_NL, 5, 3);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOL, 6, 2);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA, 7, 1);
+ /* Init template microcode */
+ ipu_dc_write_tmpl(5, WROD(0), 0, map, SYNC_WAVE, 8, 5);
+ ipu_dc_write_tmpl(6, WROD(0), 0, map, SYNC_WAVE, 4, 5);
+ ipu_dc_write_tmpl(7, WROD(0), 0, map, SYNC_WAVE, 0, 5);
+ }
+ }
+ ipu_dc_link_event(dc_chan, DC_EVT_NF, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NFIELD, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOF, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_EOFIELD, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_CHAN, 0, 0);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_ADDR, 0, 0);
+
+ reg = 0x2;
+ reg |= di << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET;
+ reg |= di << 2;
+ if (interlaced)
+ reg |= DC_WR_CH_CONF_FIELD_MODE;
+
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+
+ __raw_writel(0x00000000, DC_WR_CH_ADDR(dc_chan));
+
+ __raw_writel(0x00000084, DC_GEN);
+
+ __raw_writel(width, DC_DISP_CONF2(di));
+
+ ipu_module_enable(IPU_CONF_DC_EN);
+
+ ipu_put();
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dc_init_sync);
+
+void ipu_dc_init_async(int dc_chan, int di, bool interlaced)
+{
+ u32 reg = 0;
+ dc_channels[dc_chan].di = di;
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_0, 0x64, 1);
+ ipu_dc_link_event(dc_chan, DC_EVT_NEW_DATA_W_1, 0x64, 1);
+
+ reg = 0x3;
+ reg |= DC_DISP_ID_SERIAL << DC_WR_CH_CONF_PROG_DISP_ID_OFFSET;
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+
+ __raw_writel(0x00000000, DC_WR_CH_ADDR(dc_chan));
+
+ __raw_writel(0x00000084, DC_GEN);
+
+ ipu_module_enable(IPU_CONF_DC_EN);
+}
+EXPORT_SYMBOL(ipu_dc_init_async);
+
+void ipu_dc_enable_channel(u32 dc_chan)
+{
+ int di;
+ u32 reg;
+
+ di = dc_channels[dc_chan].di;
+
+ /* Make sure other DC sync channel is not assigned same DI */
+ reg = __raw_readl(DC_WR_CH_CONF(6 - dc_chan));
+ if ((di << 2) == (reg & DC_WR_CH_CONF_PROG_DI_ID)) {
+ reg &= ~DC_WR_CH_CONF_PROG_DI_ID;
+ reg |= di ? 0 : DC_WR_CH_CONF_PROG_DI_ID;
+ __raw_writel(reg, DC_WR_CH_CONF(6 - dc_chan));
+ }
+
+ reg = __raw_readl(DC_WR_CH_CONF(dc_chan));
+ reg |= 4 << DC_WR_CH_CONF_PROG_TYPE_OFFSET;
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+}
+EXPORT_SYMBOL(ipu_dc_enable_channel);
+
+void ipu_dc_disable_channel(u32 dc_chan)
+{
+ u32 reg;
+ int irq = 0, ret, timeout = 50;
+
+ if (dc_chan == 1) {
+ irq = IPU_IRQ_DC_FC_1;
+ } else if (dc_chan == 5) {
+ irq = IPU_IRQ_DP_SF_END;
+ } else {
+ return;
+ }
+
+ ret = ipu_wait_for_interrupt(irq, 50);
+ if (ret)
+ return;
+
+ /* Wait for DC triple buffer to empty */
+ if (dc_channels[dc_chan].di == 0)
+ while ((__raw_readl(DC_STAT) & 0x00000002)
+ != 0x00000002) {
+ msleep(2);
+ timeout -= 2;
+ if (timeout <= 0)
+ break;
+ }
+ else if (dc_channels[dc_chan].di == 1)
+ while ((__raw_readl(DC_STAT) & 0x00000020)
+ != 0x00000020) {
+ msleep(2);
+ timeout -= 2;
+ if (timeout <= 0)
+ break;
+ }
+
+ reg = __raw_readl(DC_WR_CH_CONF(dc_chan));
+ reg &= ~DC_WR_CH_CONF_PROG_TYPE_MASK;
+ __raw_writel(reg, DC_WR_CH_CONF(dc_chan));
+}
+EXPORT_SYMBOL(ipu_dc_disable_channel);
+
+static void ipu_dc_map_config(int map, int byte_num, int offset, int mask)
+{
+ int ptr = map * 3 + byte_num;
+ u32 reg;
+
+ reg = __raw_readl(DC_MAP_CONF_VAL(ptr));
+ reg &= ~(0xffff << (16 * (ptr & 0x1)));
+ reg |= ((offset << 8) | mask) << (16 * (ptr & 0x1));
+ __raw_writel(reg, DC_MAP_CONF_VAL(ptr));
+
+ reg = __raw_readl(DC_MAP_CONF_PTR(map));
+ reg &= ~(0x1f << ((16 * (map & 0x1)) + (5 * byte_num)));
+ reg |= ptr << ((16 * (map & 0x1)) + (5 * byte_num));
+ __raw_writel(reg, DC_MAP_CONF_PTR(map));
+}
+
+static void ipu_dc_map_clear(int map)
+{
+ u32 reg = __raw_readl(DC_MAP_CONF_PTR(map));
+ __raw_writel(reg & ~(0xffff << (16 * (map & 0x1))),
+ DC_MAP_CONF_PTR(map));
+}
+
+int ipu_dc_init(struct platform_device *pdev, unsigned long base, unsigned long template_base)
+{
+ static int channel_offsets[] = { 0, 0x1c, 0x38, 0x54, 0x58, 0x5c, 0x78, 0, 0x94, 0xb4};
+ int i;
+
+ ipu_dc_reg = ioremap(base, PAGE_SIZE);
+ if (!ipu_dc_reg)
+ return -ENOMEM;
+
+ ipu_dev = &pdev->dev;
+
+ ipu_dc_tmpl_reg = ioremap(template_base, PAGE_SIZE);
+ if (!ipu_dc_tmpl_reg) {
+ iounmap(ipu_dc_reg);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < 10; i++)
+ dc_channels[i].channel_offset = channel_offsets[i];
+
+ /* IPU_PIX_FMT_RGB24 */
+ ipu_dc_map_clear(0);
+ ipu_dc_map_config(0, 0, 7, 0xff);
+ ipu_dc_map_config(0, 1, 15, 0xff);
+ ipu_dc_map_config(0, 2, 23, 0xff);
+
+ /* IPU_PIX_FMT_RGB666 */
+ ipu_dc_map_clear(1);
+ ipu_dc_map_config(1, 0, 5, 0xfc);
+ ipu_dc_map_config(1, 1, 11, 0xfc);
+ ipu_dc_map_config(1, 2, 17, 0xfc);
+
+ /* IPU_PIX_FMT_YUV444 */
+ ipu_dc_map_clear(2);
+ ipu_dc_map_config(2, 0, 15, 0xff);
+ ipu_dc_map_config(2, 1, 23, 0xff);
+ ipu_dc_map_config(2, 2, 7, 0xff);
+
+ /* IPU_PIX_FMT_RGB565 */
+ ipu_dc_map_clear(3);
+ ipu_dc_map_config(3, 0, 4, 0xf8);
+ ipu_dc_map_config(3, 1, 10, 0xfc);
+ ipu_dc_map_config(3, 2, 15, 0xf8);
+
+ /* IPU_PIX_FMT_LVDS666 */
+ ipu_dc_map_clear(4);
+ ipu_dc_map_config(4, 0, 5, 0xfc);
+ ipu_dc_map_config(4, 1, 13, 0xfc);
+ ipu_dc_map_config(4, 2, 21, 0xfc);
+
+ return 0;
+}
+
+void ipu_dc_exit(struct platform_device *pdev)
+{
+ iounmap(ipu_dc_reg);
+ iounmap(ipu_dc_tmpl_reg);
+}
diff --git a/drivers/mfd/imx-ipu-v3/ipu-di.c b/drivers/mfd/imx-ipu-v3/ipu-di.c
new file mode 100644
index 0000000..62e3d01
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-di.c
@@ -0,0 +1,550 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/mfd/imx-ipu-v3.h>
+#include <linux/platform_device.h>
+
+#include "ipu-prv.h"
+
+#define SYNC_WAVE 0
+
+#define DC_DISP_ID_SYNC(di) (di)
+
+struct ipu_di {
+ void __iomem *base;
+ int id;
+ u32 module;
+ struct clk *clk;
+ struct clk *ipu_clk;
+ bool external_clk;
+ bool inuse;
+ bool initialized;
+};
+
+static struct ipu_di dis[2];
+
+static DEFINE_MUTEX(di_mutex);
+static struct device *ipu_dev;
+
+struct di_sync_config {
+ int run_count;
+ int run_src;
+ int offset_count;
+ int offset_src;
+ int repeat_count;
+ int cnt_clr_src;
+ int cnt_polarity_gen_en;
+ int cnt_polarity_clr_src;
+ int cnt_polarity_trigger_src;
+ int cnt_up;
+ int cnt_down;
+};
+
+enum di_pins {
+ DI_PIN11 = 0,
+ DI_PIN12 = 1,
+ DI_PIN13 = 2,
+ DI_PIN14 = 3,
+ DI_PIN15 = 4,
+ DI_PIN16 = 5,
+ DI_PIN17 = 6,
+ DI_PIN_CS = 7,
+
+ DI_PIN_SER_CLK = 0,
+ DI_PIN_SER_RS = 1,
+};
+
+enum di_sync_wave {
+ DI_SYNC_NONE = 0,
+ DI_SYNC_CLK = 1,
+ DI_SYNC_INT_HSYNC = 2,
+ DI_SYNC_HSYNC = 3,
+ DI_SYNC_VSYNC = 4,
+ DI_SYNC_DE = 6,
+};
+
+#define DI_GENERAL 0x0000
+#define DI_BS_CLKGEN0 0x0004
+#define DI_BS_CLKGEN1 0x0008
+#define DI_SW_GEN0(gen) (0x000c + 4 * ((gen) - 1))
+#define DI_SW_GEN1(gen) (0x0030 + 4 * ((gen) - 1))
+#define DI_STP_REP(gen) (0x0148 + 4 * (((gen) - 1)/2))
+#define DI_SYNC_AS_GEN 0x0054
+#define DI_DW_GEN(gen) (0x0058 + 4 * (gen))
+#define DI_DW_SET(gen, set) (0x0088 + 4 * ((gen) + 0xc * (set)))
+#define DI_SER_CONF 0x015c
+#define DI_SSC 0x0160
+#define DI_POL 0x0164
+#define DI_AW0 0x0168
+#define DI_AW1 0x016c
+#define DI_SCR_CONF 0x0170
+#define DI_STAT 0x0174
+
+#define DI_SW_GEN0_RUN_COUNT(x) ((x) << 19)
+#define DI_SW_GEN0_RUN_SRC(x) ((x) << 16)
+#define DI_SW_GEN0_OFFSET_COUNT(x) ((x) << 3)
+#define DI_SW_GEN0_OFFSET_SRC(x) ((x) << 0)
+
+#define DI_SW_GEN1_CNT_POL_GEN_EN(x) ((x) << 29)
+#define DI_SW_GEN1_CNT_CLR_SRC(x) ((x) << 25)
+#define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x) ((x) << 12)
+#define DI_SW_GEN1_CNT_POL_CLR_SRC(x) ((x) << 9)
+#define DI_SW_GEN1_CNT_DOWN(x) ((x) << 16)
+#define DI_SW_GEN1_CNT_UP(x) (x)
+#define DI_SW_GEN1_AUTO_RELOAD (0x10000000)
+
+#define DI_DW_GEN_ACCESS_SIZE_OFFSET 24
+#define DI_DW_GEN_COMPONENT_SIZE_OFFSET 16
+
+#define DI_GEN_DI_CLK_EXT (1 << 20)
+#define DI_GEN_POLARITY_1 (1 << 0)
+#define DI_GEN_POLARITY_2 (1 << 1)
+#define DI_GEN_POLARITY_3 (1 << 2)
+#define DI_GEN_POLARITY_4 (1 << 3)
+#define DI_GEN_POLARITY_5 (1 << 4)
+#define DI_GEN_POLARITY_6 (1 << 5)
+#define DI_GEN_POLARITY_7 (1 << 6)
+#define DI_GEN_POLARITY_8 (1 << 7)
+
+#define DI_POL_DRDY_DATA_POLARITY (1 << 7)
+#define DI_POL_DRDY_POLARITY_15 (1 << 4)
+
+#define DI_VSYNC_SEL_OFFSET 13
+
+#define DI0_COUNTER_RELEASE (1 << 24)
+#define DI1_COUNTER_RELEASE (1 << 25)
+
+static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
+{
+ return __raw_readl(di->base + offset);
+}
+
+static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
+{
+ __raw_writel(value, di->base + offset);
+}
+
+static void ipu_di_data_wave_config(struct ipu_di *di,
+ int wave_gen,
+ int access_size, int component_size)
+{
+ u32 reg;
+ reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
+ (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
+ ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
+}
+
+static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin, int set,
+ int up, int down)
+{
+ u32 reg;
+
+ reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
+ reg &= ~(0x3 << (di_pin * 2));
+ reg |= set << (di_pin * 2);
+ ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
+
+ ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
+}
+
+static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config, int count)
+{
+ u32 reg;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ struct di_sync_config *c = &config[i];
+ int wave_gen = i + 1;
+
+ pr_debug("%s %d\n", __func__, wave_gen);
+ if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) || (c->repeat_count >= 0x1000) ||
+ (c->cnt_up >= 0x400) || (c->cnt_down >= 0x400)) {
+ dev_err(ipu_dev, "DI%d counters out of range.\n", di->id);
+ return;
+ }
+
+ reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
+ DI_SW_GEN0_RUN_SRC(c->run_src) |
+ DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
+ DI_SW_GEN0_OFFSET_SRC(c->offset_src);
+ ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));
+
+ reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
+ DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
+ DI_SW_GEN1_CNT_POL_TRIGGER_SRC(c->cnt_polarity_trigger_src) |
+ DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
+ DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
+ DI_SW_GEN1_CNT_UP(c->cnt_up);
+
+ if (c->repeat_count == 0) {
+ /* Enable auto reload */
+ reg |= DI_SW_GEN1_AUTO_RELOAD;
+ }
+
+ ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));
+
+ reg = ipu_di_read(di, DI_STP_REP(wave_gen));
+ reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
+ reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
+ ipu_di_write(di, reg, DI_STP_REP(wave_gen));
+ }
+}
+
+static void ipu_di_sync_config_interlaced(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
+{
+ u32 h_total = sig->width + sig->h_sync_width + sig->h_start_width + sig->h_end_width;
+ u32 v_total = sig->height + sig->v_sync_width + sig->v_start_width + sig->v_end_width;
+ u32 reg;
+ struct di_sync_config cfg[] = {
+ {
+ .run_count = h_total / 2 - 1,
+ .run_src = DI_SYNC_CLK,
+ }, {
+ .run_count = h_total - 11,
+ .run_src = DI_SYNC_CLK,
+ .cnt_down = 4,
+ }, {
+ .run_count = v_total * 2 - 1,
+ .run_src = DI_SYNC_INT_HSYNC,
+ .offset_count = 1,
+ .offset_src = DI_SYNC_INT_HSYNC,
+ .cnt_down = 4,
+ }, {
+ .run_count = v_total / 2 - 1,
+ .run_src = DI_SYNC_HSYNC,
+ .offset_count = sig->v_start_width,
+ .offset_src = DI_SYNC_HSYNC,
+ .repeat_count = 2,
+ .cnt_clr_src = DI_SYNC_VSYNC,
+ }, {
+ .run_src = DI_SYNC_HSYNC,
+ .repeat_count = sig->height / 2,
+ .cnt_clr_src = 4,
+ }, {
+ .run_count = v_total - 1,
+ .run_src = DI_SYNC_HSYNC,
+ }, {
+ .run_count = v_total / 2 - 1,
+ .run_src = DI_SYNC_HSYNC,
+ .offset_count = 9,
+ .offset_src = DI_SYNC_HSYNC,
+ .repeat_count = 2,
+ .cnt_clr_src = DI_SYNC_VSYNC,
+ }, {
+ .run_src = DI_SYNC_CLK,
+ .offset_count = sig->h_start_width,
+ .offset_src = DI_SYNC_CLK,
+ .repeat_count = sig->width,
+ .cnt_clr_src = 5,
+ }, {
+ .run_count = v_total - 1,
+ .run_src = DI_SYNC_INT_HSYNC,
+ .offset_count = v_total / 2,
+ .offset_src = DI_SYNC_INT_HSYNC,
+ .cnt_clr_src = DI_SYNC_HSYNC,
+ .cnt_down = 4,
+ }
+ };
+
+ ipu_di_sync_config(di, cfg, ARRAY_SIZE(cfg));
+
+ /* set gentime select and tag sel */
+ reg = ipu_di_read(di, DI_SW_GEN1(9));
+ reg &= 0x1FFFFFFF;
+ reg |= (3 - 1) << 29 | 0x00008000;
+ ipu_di_write(di, reg, DI_SW_GEN1(9));
+
+ ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
+}
+
+static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
+ struct ipu_di_signal_cfg *sig, int div)
+{
+ u32 h_total = sig->width + sig->h_sync_width + sig->h_start_width +
+ sig->h_end_width;
+ u32 v_total = sig->height + sig->v_sync_width + sig->v_start_width +
+ sig->v_end_width + (sig->v_end_width < 2 ? 1 : 0);
+ struct di_sync_config cfg[] = {
+ {
+ .run_count = h_total - 1,
+ .run_src = DI_SYNC_CLK,
+ } , {
+ .run_count = h_total - 1,
+ .run_src = DI_SYNC_CLK,
+ .offset_count = div * sig->v_to_h_sync,
+ .offset_src = DI_SYNC_CLK,
+ .cnt_polarity_gen_en = 1,
+ .cnt_polarity_trigger_src = DI_SYNC_CLK,
+ .cnt_down = sig->h_sync_width * 2,
+ } , {
+ .run_count = v_total - 1,
+ .run_src = DI_SYNC_INT_HSYNC,
+ .cnt_polarity_gen_en = 1,
+ .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
+ .cnt_down = sig->v_sync_width * 2,
+ } , {
+ .run_src = DI_SYNC_HSYNC,
+ .offset_count = sig->v_sync_width + sig->v_start_width,
+ .offset_src = DI_SYNC_HSYNC,
+ .repeat_count = sig->height,
+ .cnt_clr_src = DI_SYNC_VSYNC,
+ } , {
+ .run_src = DI_SYNC_CLK,
+ .offset_count = sig->h_sync_width + sig->h_start_width,
+ .offset_src = DI_SYNC_CLK,
+ .repeat_count = sig->width,
+ .cnt_clr_src = 5,
+ } , {
+ /* unused */
+ } , {
+ /* unused */
+ } , {
+ /* unused */
+ } , {
+ /* unused */
+ },
+ };
+
+ ipu_di_write(di, v_total - 1, DI_SCR_CONF);
+ ipu_di_sync_config(di, cfg, ARRAY_SIZE(cfg));
+}
+
+int ipu_di_init_sync_panel(struct ipu_di *di, u32 pixel_clk, struct ipu_di_signal_cfg *sig)
+{
+ u32 reg;
+ u32 disp_gen, di_gen, vsync_cnt;
+ u32 div;
+ u32 h_total, v_total;
+ struct clk *di_clk;
+
+ dev_dbg(ipu_dev, "disp %d: panel size = %d x %d\n",
+ di->id, sig->width, sig->height);
+
+ if ((sig->v_sync_width == 0) || (sig->h_sync_width == 0))
+ return -EINVAL;
+
+ h_total = sig->width + sig->h_sync_width + sig->h_start_width + sig->h_end_width;
+ v_total = sig->height + sig->v_sync_width + sig->v_start_width + sig->v_end_width;
+
+ mutex_lock(&di_mutex);
+ ipu_get();
+
+ /* Init clocking */
+ if (sig->ext_clk) {
+ di->external_clk = true;
+ di_clk = di->clk;
+ } else {
+ di->external_clk = false;
+ di_clk = di->ipu_clk;
+ }
+
+ /*
+ * Calculate divider
+ * Fractional part is 4 bits,
+ * so simply multiply by 2^4 to get fractional part.
+ */
+ div = (clk_get_rate(di_clk) * 16) / pixel_clk;
+ if (div < 0x10) /* Min DI disp clock divider is 1 */
+ div = 0x10;
+
+ disp_gen = ipu_cm_read(IPU_DISP_GEN);
+ disp_gen &= di->id ? ~DI1_COUNTER_RELEASE : ~DI0_COUNTER_RELEASE;
+ ipu_cm_write(disp_gen, IPU_DISP_GEN);
+
+ ipu_di_write(di, div, DI_BS_CLKGEN0);
+
+ /* Setup pixel clock timing */
+ /* Down time is half of period */
+ ipu_di_write(di, (div / 16) << 16, DI_BS_CLKGEN1);
+
+ ipu_di_data_wave_config(di, SYNC_WAVE, div / 16 - 1, div / 16 - 1);
+ ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div / 16 * 2);
+
+ div = div / 16; /* Now divider is integer portion */
+
+ di_gen = 0;
+ if (sig->ext_clk)
+ di_gen |= DI_GEN_DI_CLK_EXT;
+
+ if (sig->interlaced) {
+ ipu_di_sync_config_interlaced(di, sig);
+
+ /* set y_sel = 1 */
+ di_gen |= 0x10000000;
+ di_gen |= DI_GEN_POLARITY_5;
+ di_gen |= DI_GEN_POLARITY_8;
+
+ vsync_cnt = 7;
+
+ if (sig->Hsync_pol)
+ di_gen |= DI_GEN_POLARITY_3;
+ if (sig->Vsync_pol)
+ di_gen |= DI_GEN_POLARITY_2;
+ } else {
+ ipu_di_sync_config_noninterlaced(di, sig, div);
+
+ vsync_cnt = 3;
+
+ if (sig->Hsync_pol)
+ di_gen |= DI_GEN_POLARITY_2;
+ if (sig->Vsync_pol)
+ di_gen |= DI_GEN_POLARITY_3;
+ }
+
+ ipu_di_write(di, di_gen, DI_GENERAL);
+ ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
+ DI_SYNC_AS_GEN);
+
+ reg = ipu_di_read(di, DI_POL);
+ reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
+
+ if (sig->enable_pol)
+ reg |= DI_POL_DRDY_POLARITY_15;
+ if (sig->data_pol)
+ reg |= DI_POL_DRDY_DATA_POLARITY;
+
+ ipu_di_write(di, reg, DI_POL);
+
+ ipu_put();
+ mutex_unlock(&di_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_di_init_sync_panel);
+
+int ipu_di_enable(struct ipu_di *di)
+{
+ u32 reg;
+
+ ipu_get();
+ reg = ipu_cm_read(IPU_DISP_GEN);
+ if (di->id)
+ reg |= DI1_COUNTER_RELEASE;
+ else
+ reg |= DI0_COUNTER_RELEASE;
+ ipu_cm_write(reg, IPU_DISP_GEN);
+
+ if (di->external_clk)
+ clk_enable(di->clk);
+
+ ipu_module_enable(di->module);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_di_enable);
+
+int ipu_di_disable(struct ipu_di *di)
+{
+ u32 reg;
+
+ ipu_module_disable(di->module);
+ ipu_put();
+
+ if (di->external_clk)
+ clk_disable(di->clk);
+
+ reg = ipu_cm_read(IPU_DISP_GEN);
+ if (di->id)
+ reg &= ~DI1_COUNTER_RELEASE;
+ else
+ reg &= ~DI0_COUNTER_RELEASE;
+ ipu_cm_write(reg, IPU_DISP_GEN);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_di_disable);
+
+static DEFINE_MUTEX(ipu_di_lock);
+
+struct ipu_di *ipu_di_get(int disp)
+{
+ struct ipu_di *di;
+
+ if (disp > 1)
+ return ERR_PTR(-EINVAL);
+
+ di = &dis[disp];
+
+ mutex_lock(&ipu_di_lock);
+
+ if (!di->initialized) {
+ di = ERR_PTR(-ENOSYS);
+ goto out;
+ }
+
+ if (di->inuse) {
+ di = ERR_PTR(-EBUSY);
+ goto out;
+ }
+
+ di->inuse = true;
+out:
+ mutex_unlock(&ipu_di_lock);
+
+ return di;
+}
+EXPORT_SYMBOL(ipu_di_get);
+
+void ipu_di_put(struct ipu_di *di)
+{
+ mutex_lock(&ipu_di_lock);
+
+ di->inuse = false;
+
+ mutex_unlock(&ipu_di_lock);
+}
+EXPORT_SYMBOL(ipu_di_put);
+
+int ipu_di_init(struct platform_device *pdev, int id, unsigned long base,
+ u32 module, struct clk *ipu_clk)
+{
+ char *clkid;
+
+ if (id > 1)
+ return -EINVAL;
+
+ if (id)
+ clkid = "di1";
+ else
+ clkid = "di0";
+
+ ipu_dev = &pdev->dev;
+
+ dis[id].clk = clk_get(&pdev->dev, clkid);
+ dis[id].module = module;
+ dis[id].id = id;
+ dis[id].ipu_clk = ipu_clk;
+ dis[id].base = ioremap(base, PAGE_SIZE);
+ dis[id].initialized = true;
+ dis[id].inuse = false;
+ if (!dis[id].base)
+ return -ENOMEM;
+
+ /* Set MCU_T to divide MCU access window into 2 */
+ ipu_cm_write(0x00400000L | (IPU_MCU_T_DEFAULT << 18), IPU_DISP_GEN);
+
+ return 0;
+}
+
+void ipu_di_exit(struct platform_device *pdev, int id)
+{
+ clk_put(dis[id].clk);
+ iounmap(dis[id].base);
+ dis[id].initialized = false;
+}
diff --git a/drivers/mfd/imx-ipu-v3/ipu-dmfc.c b/drivers/mfd/imx-ipu-v3/ipu-dmfc.c
new file mode 100644
index 0000000..3d47a76
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-dmfc.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mfd/imx-ipu-v3.h>
+
+#include "ipu-prv.h"
+
+#define DMFC_RD_CHAN 0x0000
+#define DMFC_WR_CHAN 0x0004
+#define DMFC_WR_CHAN_DEF 0x0008
+#define DMFC_DP_CHAN 0x000c
+#define DMFC_DP_CHAN_DEF 0x0010
+#define DMFC_GENERAL1 0x0014
+#define DMFC_GENERAL2 0x0018
+#define DMFC_IC_CTRL 0x001c
+#define DMFC_STAT 0x0020
+
+#define DMFC_WR_CHAN_1_28 0
+#define DMFC_WR_CHAN_2_41 8
+#define DMFC_WR_CHAN_1C_42 16
+#define DMFC_WR_CHAN_2C_43 24
+
+#define DMFC_DP_CHAN_5B_23 0
+#define DMFC_DP_CHAN_5F_27 8
+#define DMFC_DP_CHAN_6B_24 16
+#define DMFC_DP_CHAN_6F_29 24
+
+#define DMFC_FIFO_SIZE_64 (3 << 3)
+#define DMFC_FIFO_SIZE_128 (2 << 3)
+#define DMFC_FIFO_SIZE_256 (1 << 3)
+#define DMFC_FIFO_SIZE_512 (0 << 3)
+
+#define DMFC_SEGMENT(x) ((x & 0x7) << 0)
+#define DMFC_BURSTSIZE_32 (0 << 6)
+#define DMFC_BURSTSIZE_16 (1 << 6)
+#define DMFC_BURSTSIZE_8 (2 << 6)
+#define DMFC_BURSTSIZE_4 (3 << 6)
+
+static struct device *ipu_dev;
+
+struct dmfc_channel {
+ int ipu_channel;
+ unsigned long channel_reg;
+ unsigned long shift;
+ unsigned eot_shift;
+ unsigned slots;
+ unsigned max_fifo_lines;
+ unsigned slotmask;
+ unsigned segment;
+};
+
+static struct dmfc_channel dmfcs[] = {
+ {
+ .ipu_channel = 23,
+ .channel_reg = DMFC_DP_CHAN,
+ .shift = DMFC_DP_CHAN_5B_23,
+ .eot_shift = 20,
+ .max_fifo_lines = 3,
+ }, {
+ .ipu_channel = 24,
+ .channel_reg = DMFC_DP_CHAN,
+ .shift = DMFC_DP_CHAN_6B_24,
+ .eot_shift = 22,
+ .max_fifo_lines = 1,
+ }, {
+ .ipu_channel = 27,
+ .channel_reg = DMFC_DP_CHAN,
+ .shift = DMFC_DP_CHAN_5F_27,
+ .eot_shift = 21,
+ .max_fifo_lines = 2,
+ }, {
+ .ipu_channel = 28,
+ .channel_reg = DMFC_WR_CHAN,
+ .shift = DMFC_WR_CHAN_1_28,
+ .eot_shift = 16,
+ .max_fifo_lines = 2,
+ }, {
+ .ipu_channel = 29,
+ .channel_reg = DMFC_DP_CHAN,
+ .shift = DMFC_DP_CHAN_6F_29,
+ .eot_shift = 23,
+ .max_fifo_lines = 1,
+ },
+};
+
+#define DMFC_NUM_CHANNELS ARRAY_SIZE(dmfcs)
+
+static int dmfc_use_count;
+static void __iomem *dmfc_regs;
+static unsigned long dmfc_bandwidth_per_slot;
+static DEFINE_MUTEX(dmfc_mutex);
+
+int ipu_dmfc_enable_channel(struct dmfc_channel *dmfc)
+{
+ mutex_lock(&dmfc_mutex);
+ ipu_get();
+
+ if (!dmfc_use_count)
+ ipu_module_enable(IPU_CONF_DMFC_EN);
+
+ dmfc_use_count++;
+
+ mutex_unlock(&dmfc_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dmfc_enable_channel);
+
+void ipu_dmfc_disable_channel(struct dmfc_channel *dmfc)
+{
+ mutex_lock(&dmfc_mutex);
+
+ dmfc_use_count--;
+
+ if (!dmfc_use_count)
+ ipu_module_disable(IPU_CONF_DMFC_EN);
+
+ if (dmfc_use_count < 0)
+ dmfc_use_count = 0;
+
+ ipu_put();
+ mutex_unlock(&dmfc_mutex);
+}
+EXPORT_SYMBOL(ipu_dmfc_disable_channel);
+
+static int ipu_dmfc_setup_channel(struct dmfc_channel *dmfc, int slots, int segment)
+{
+ u32 val, field;
+
+ dev_dbg(ipu_dev, "dmfc: using %d slots starting from segment %d for IPU channel %d\n",
+ slots, segment, dmfc->ipu_channel);
+
+ if (!dmfc)
+ return -EINVAL;
+
+ switch (slots) {
+ case 1:
+ field = DMFC_FIFO_SIZE_64;
+ break;
+ case 2:
+ field = DMFC_FIFO_SIZE_128;
+ break;
+ case 4:
+ field = DMFC_FIFO_SIZE_256;
+ break;
+ case 8:
+ field = DMFC_FIFO_SIZE_512;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ field |= DMFC_SEGMENT(segment) | DMFC_BURSTSIZE_8;
+
+ val = readl(dmfc_regs + dmfc->channel_reg);
+
+ val &= ~(0xff << dmfc->shift);
+ val |= field << dmfc->shift;
+
+ writel(val, dmfc_regs + dmfc->channel_reg);
+
+ dmfc->slots = slots;
+ dmfc->segment = segment;
+ dmfc->slotmask = ((1 << slots) - 1) << segment;
+
+ return 0;
+}
+
+static int dmfc_bandwidth_to_slots(unsigned long bandwidth)
+{
+ int slots = 1;
+
+ while (slots * dmfc_bandwidth_per_slot < bandwidth)
+ slots *= 2;
+
+ return slots;
+}
+
+static int dmfc_find_slots(int slots)
+{
+ unsigned slotmask_need, slotmask_used = 0;
+ int i, segment = 0;
+
+ slotmask_need = (1 << slots) - 1;
+
+ for (i = 0; i < DMFC_NUM_CHANNELS; i++)
+ slotmask_used |= dmfcs[i].slotmask;
+
+ while (slotmask_need <= 0xff) {
+ if (!(slotmask_used & slotmask_need))
+ return segment;
+
+ slotmask_need <<= 1;
+ segment++;
+ }
+
+ return -EBUSY;
+}
+
+void ipu_dmfc_free_bandwidth(struct dmfc_channel *dmfc)
+{
+ int i;
+
+ dev_dbg(ipu_dev, "dmfc: freeing %d slots starting from segment %d\n",
+ dmfc->slots, dmfc->segment);
+
+ mutex_lock(&dmfc_mutex);
+
+ if (!dmfc->slots)
+ goto out;
+
+ dmfc->slotmask = 0;
+ dmfc->slots = 0;
+ dmfc->segment = 0;
+
+ for (i = 0; i < ARRAY_SIZE(dmfcs); i++)
+ dmfcs[i].slotmask = 0;
+
+ for (i = 0; i < ARRAY_SIZE(dmfcs); i++) {
+ if (dmfcs[i].slots > 0) {
+ dmfcs[i].segment = dmfc_find_slots(dmfcs[i].slots);
+ dmfcs[i].slotmask = ((1 << dmfcs[i].slots) - 1) << dmfcs[i].segment;
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(dmfcs); i++) {
+ if (dmfcs[i].slots > 0)
+ ipu_dmfc_setup_channel(&dmfcs[i], dmfcs[i].slots, dmfcs[i].segment);
+ }
+out:
+ mutex_unlock(&dmfc_mutex);
+}
+EXPORT_SYMBOL(ipu_dmfc_free_bandwidth);
+
+int ipu_dmfc_alloc_bandwidth(struct dmfc_channel *dmfc,
+ unsigned long bandwidth_pixel_per_second)
+{
+ int slots = dmfc_bandwidth_to_slots(bandwidth_pixel_per_second);
+ int segment = 0, ret = 0;
+
+ dev_dbg(ipu_dev, "dmfc: trying to allocate %ldMpixel/s for IPU channel %d\n",
+ bandwidth_pixel_per_second / 1000000, dmfc->ipu_channel);
+
+ ipu_dmfc_free_bandwidth(dmfc);
+
+ ipu_get();
+ mutex_lock(&dmfc_mutex);
+
+ if (slots > 8) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ segment = dmfc_find_slots(slots);
+ if (segment < 0) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ipu_dmfc_setup_channel(dmfc, slots, segment);
+
+out:
+ ipu_put();
+ mutex_unlock(&dmfc_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(ipu_dmfc_alloc_bandwidth);
+
+int ipu_dmfc_init_channel(struct dmfc_channel *dmfc, int width)
+{
+ u32 dmfc_gen1;
+
+ ipu_get();
+
+ dmfc_gen1 = readl(dmfc_regs + DMFC_GENERAL1);
+
+ if ((dmfc->slots * 64 * 4) / width > dmfc->max_fifo_lines)
+ dmfc_gen1 |= 1 << dmfc->eot_shift;
+ else
+ dmfc_gen1 &= ~(1 << dmfc->eot_shift);
+
+ writel(dmfc_gen1, dmfc_regs + DMFC_GENERAL1);
+
+ ipu_put();
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dmfc_init_channel);
+
+struct dmfc_channel *ipu_dmfc_get(int ipu_channel)
+{
+ int i;
+
+ for (i = 0; i < DMFC_NUM_CHANNELS; i++)
+ if (dmfcs[i].ipu_channel == ipu_channel)
+ return &dmfcs[i];
+ return NULL;
+}
+EXPORT_SYMBOL(ipu_dmfc_get);
+
+void ipu_dmfc_put(struct dmfc_channel *dmfc)
+{
+ ipu_dmfc_free_bandwidth(dmfc);
+}
+EXPORT_SYMBOL(ipu_dmfc_put);
+
+int ipu_dmfc_init(struct platform_device *pdev, unsigned long base,
+ struct clk *ipu_clk)
+{
+ dmfc_regs = ioremap(base, PAGE_SIZE);
+
+ if (!dmfc_regs)
+ return -ENOMEM;
+
+ ipu_dev = &pdev->dev;
+
+ writel(0x0, dmfc_regs + DMFC_WR_CHAN);
+ writel(0x0, dmfc_regs + DMFC_DP_CHAN);
+
+ /*
+ * We have a total bandwidth of clkrate * 4pixel divided
+ * into 8 slots.
+ */
+ dmfc_bandwidth_per_slot = clk_get_rate(ipu_clk) / 4;
+
+ dev_dbg(ipu_dev, "dmfc: 8 slots with %ldMpixel/s bandwidth each\n",
+ dmfc_bandwidth_per_slot / 1000000);
+
+ writel(0x202020f6, dmfc_regs + DMFC_WR_CHAN_DEF);
+ writel(0x2020f6f6, dmfc_regs + DMFC_DP_CHAN_DEF);
+ writel(0x00000003, dmfc_regs + DMFC_GENERAL1);
+
+ return 0;
+}
+
+void ipu_dmfc_exit(struct platform_device *pdev)
+{
+ iounmap(dmfc_regs);
+}
diff --git a/drivers/mfd/imx-ipu-v3/ipu-dp.c b/drivers/mfd/imx-ipu-v3/ipu-dp.c
new file mode 100644
index 0000000..57a7fec
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-dp.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mfd/imx-ipu-v3.h>
+#include <linux/err.h>
+
+#include "ipu-prv.h"
+
+#define DP_SYNC 0
+#define DP_ASYNC0 0x60
+#define DP_ASYNC1 0xBC
+
+#define DP_COM_CONF(flow) (ipu_dp_base + flow)
+#define DP_GRAPH_WIND_CTRL(flow) (ipu_dp_base + 0x0004 + flow)
+#define DP_FG_POS(flow) (ipu_dp_base + 0x0008 + flow)
+#define DP_CSC_A_0(flow) (ipu_dp_base + 0x0044 + flow)
+#define DP_CSC_A_1(flow) (ipu_dp_base + 0x0048 + flow)
+#define DP_CSC_A_2(flow) (ipu_dp_base + 0x004C + flow)
+#define DP_CSC_A_3(flow) (ipu_dp_base + 0x0050 + flow)
+#define DP_CSC_0(flow) (ipu_dp_base + 0x0054 + flow)
+#define DP_CSC_1(flow) (ipu_dp_base + 0x0058 + flow)
+
+#define DP_COM_CONF_FG_EN (1 << 0)
+#define DP_COM_CONF_GWSEL (1 << 1)
+#define DP_COM_CONF_GWAM (1 << 2)
+#define DP_COM_CONF_GWCKE (1 << 3)
+#define DP_COM_CONF_CSC_DEF_MASK (3 << 8)
+#define DP_COM_CONF_CSC_DEF_OFFSET 8
+#define DP_COM_CONF_CSC_DEF_FG (3 << 8)
+#define DP_COM_CONF_CSC_DEF_BG (2 << 8)
+#define DP_COM_CONF_CSC_DEF_BOTH (1 << 8)
+
+struct ipu_dp {
+ u32 flow;
+ bool in_use;
+};
+
+static struct ipu_dp ipu_dp[3];
+static struct device *ipu_dev;
+
+static u32 ipu_flows[] = {DP_SYNC, DP_ASYNC0, DP_ASYNC1};
+
+enum csc_type_t {
+ RGB2YUV = 0,
+ YUV2RGB,
+ RGB2RGB,
+ YUV2YUV,
+ CSC_NONE,
+ CSC_NUM
+};
+
+static void __iomem *ipu_dp_base;
+static int dp_use_count;
+static DEFINE_MUTEX(dp_mutex);
+
+/* Y = R * .299 + G * .587 + B * .114;
+ U = R * -.169 + G * -.332 + B * .500 + 128.;
+ V = R * .500 + G * -.419 + B * -.0813 + 128.;*/
+static const int rgb2ycbcr_coeff[5][3] = {
+ { 153, 301, 58, },
+ { -87, -170, 0x0100, },
+ { 0x100, -215, -42, },
+ { 0x0000, 0x0200, 0x0200, }, /* B0, B1, B2 */
+ { 0x2, 0x2, 0x2, }, /* S0, S1, S2 */
+};
+
+/* R = (1.164 * (Y - 16)) + (1.596 * (Cr - 128));
+ G = (1.164 * (Y - 16)) - (0.392 * (Cb - 128)) - (0.813 * (Cr - 128));
+ B = (1.164 * (Y - 16)) + (2.017 * (Cb - 128); */
+static const int ycbcr2rgb_coeff[5][3] = {
+ { 0x095, 0x000, 0x0CC, },
+ { 0x095, 0x3CE, 0x398, },
+ { 0x095, 0x0FF, 0x000, },
+ { 0x3E42, 0x010A, 0x3DD6, }, /*B0,B1,B2 */
+ { 0x1, 0x1, 0x1, }, /*S0,S1,S2 */
+};
+
+/* Please keep S0, S1 and S2 as 0x2 by using this conversion */
+static int _rgb_to_yuv(int n, int red, int green, int blue)
+{
+ int c;
+
+ c = red * rgb2ycbcr_coeff[n][0];
+ c += green * rgb2ycbcr_coeff[n][1];
+ c += blue * rgb2ycbcr_coeff[n][2];
+ c /= 16;
+ c += rgb2ycbcr_coeff[3][n] * 4;
+ c += 8;
+ c /= 16;
+ if (c < 0)
+ c = 0;
+ if (c > 255)
+ c = 255;
+ return c;
+}
+
+struct dp_csc_param_t {
+ int mode;
+ void *coeff;
+};
+
+/*
+ * Row is for BG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE
+ * Column is for FG: RGB2YUV YUV2RGB RGB2RGB YUV2YUV CSC_NONE
+ */
+static struct dp_csc_param_t dp_csc_array[CSC_NUM][CSC_NUM] = {
+ {
+ { DP_COM_CONF_CSC_DEF_BOTH, &rgb2ycbcr_coeff, },
+ { 0, 0, },
+ { 0, 0, },
+ { DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff, },
+ { DP_COM_CONF_CSC_DEF_BG, &rgb2ycbcr_coeff, },
+ }, {
+ { 0, 0, },
+ { DP_COM_CONF_CSC_DEF_BOTH, &ycbcr2rgb_coeff, },
+ { DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff, },
+ { 0, 0, },
+ { DP_COM_CONF_CSC_DEF_BG, &ycbcr2rgb_coeff, },
+ }, {
+ { 0, 0, },
+ { DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff, },
+ { 0, 0, },
+ { 0, 0, },
+ { 0, 0, },
+ }, {
+ { DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff, },
+ { 0, 0, },
+ { 0, 0, },
+ { 0, 0, },
+ { 0, 0, },
+ }, {
+ { DP_COM_CONF_CSC_DEF_FG, &rgb2ycbcr_coeff, },
+ { DP_COM_CONF_CSC_DEF_FG, &ycbcr2rgb_coeff, },
+ { 0, 0, },
+ { 0, 0, },
+ { 0, 0, },
+ }
+};
+
+static enum csc_type_t fg_csc_type = CSC_NONE, bg_csc_type = CSC_NONE;
+
+static int color_key_4rgb = 1;
+
+int ipu_dp_set_color_key(struct ipu_dp *dp, bool enable, u32 color_key)
+{
+ u32 reg;
+ int y, u, v;
+ int red, green, blue;
+
+ mutex_lock(&dp_mutex);
+
+ color_key_4rgb = 1;
+ /* Transform color key from rgb to yuv if CSC is enabled */
+ if (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB))) {
+
+ dev_dbg(ipu_dev, "color key 0x%x need change to yuv fmt\n", color_key);
+
+ red = (color_key >> 16) & 0xFF;
+ green = (color_key >> 8) & 0xFF;
+ blue = color_key & 0xFF;
+
+ y = _rgb_to_yuv(0, red, green, blue);
+ u = _rgb_to_yuv(1, red, green, blue);
+ v = _rgb_to_yuv(2, red, green, blue);
+ color_key = (y << 16) | (u << 8) | v;
+
+ color_key_4rgb = 0;
+
+ dev_dbg(ipu_dev, "color key change to yuv fmt 0x%x\n", color_key);
+ }
+
+ if (enable) {
+ reg = __raw_readl(DP_GRAPH_WIND_CTRL(dp->flow)) & 0xFF000000L;
+ __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(dp->flow));
+
+ reg = __raw_readl(DP_COM_CONF(dp->flow));
+ __raw_writel(reg | DP_COM_CONF_GWCKE, DP_COM_CONF(dp->flow));
+ } else {
+ reg = __raw_readl(DP_COM_CONF(dp->flow));
+ __raw_writel(reg & ~DP_COM_CONF_GWCKE, DP_COM_CONF(dp->flow));
+ }
+
+ reg = ipu_cm_read(IPU_SRM_PRI2) | 0x8;
+ ipu_cm_write(reg, IPU_SRM_PRI2);
+
+ mutex_unlock(&dp_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dp_set_color_key);
+
+int ipu_dp_set_global_alpha(struct ipu_dp *dp, bool enable, u8 alpha, bool bg_chan)
+{
+ u32 reg;
+
+ mutex_lock(&dp_mutex);
+
+ reg = __raw_readl(DP_COM_CONF(dp->flow));
+ if (bg_chan)
+ reg &= ~DP_COM_CONF_GWSEL;
+ else
+ reg |= DP_COM_CONF_GWSEL;
+ __raw_writel(reg, DP_COM_CONF(dp->flow));
+
+ if (enable) {
+ reg = __raw_readl(DP_GRAPH_WIND_CTRL(dp->flow)) & 0x00FFFFFFL;
+ __raw_writel(reg | ((u32) alpha << 24),
+ DP_GRAPH_WIND_CTRL(dp->flow));
+
+ reg = __raw_readl(DP_COM_CONF(dp->flow));
+ __raw_writel(reg | DP_COM_CONF_GWAM, DP_COM_CONF(dp->flow));
+ } else {
+ reg = __raw_readl(DP_COM_CONF(dp->flow));
+ __raw_writel(reg & ~DP_COM_CONF_GWAM, DP_COM_CONF(dp->flow));
+ }
+
+ reg = ipu_cm_read(IPU_SRM_PRI2) | 0x8;
+ ipu_cm_write(reg, IPU_SRM_PRI2);
+
+ mutex_unlock(&dp_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dp_set_global_alpha);
+
+int ipu_dp_set_window_pos(struct ipu_dp *dp, u16 x_pos, u16 y_pos)
+{
+ u32 reg;
+
+ mutex_lock(&dp_mutex);
+
+ __raw_writel((x_pos << 16) | y_pos, DP_FG_POS(dp->flow));
+
+ reg = ipu_cm_read(IPU_SRM_PRI2);
+ reg |= 0x8;
+ ipu_cm_write(reg, IPU_SRM_PRI2);
+
+ mutex_unlock(&dp_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dp_set_window_pos);
+
+#define mask_a(a) ((u32)(a) & 0x3FF)
+#define mask_b(b) ((u32)(b) & 0x3FFF)
+
+void __ipu_dp_csc_setup(int dp, struct dp_csc_param_t dp_csc_param,
+ bool srm_mode_update)
+{
+ u32 reg;
+ const int (*coeff)[5][3];
+
+ if (dp_csc_param.mode >= 0) {
+ reg = __raw_readl(DP_COM_CONF(dp));
+ reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+ reg |= dp_csc_param.mode;
+ __raw_writel(reg, DP_COM_CONF(dp));
+ }
+
+ coeff = dp_csc_param.coeff;
+
+ if (coeff) {
+ __raw_writel(mask_a((*coeff)[0][0]) |
+ (mask_a((*coeff)[0][1]) << 16), DP_CSC_A_0(dp));
+ __raw_writel(mask_a((*coeff)[0][2]) |
+ (mask_a((*coeff)[1][0]) << 16), DP_CSC_A_1(dp));
+ __raw_writel(mask_a((*coeff)[1][1]) |
+ (mask_a((*coeff)[1][2]) << 16), DP_CSC_A_2(dp));
+ __raw_writel(mask_a((*coeff)[2][0]) |
+ (mask_a((*coeff)[2][1]) << 16), DP_CSC_A_3(dp));
+ __raw_writel(mask_a((*coeff)[2][2]) |
+ (mask_b((*coeff)[3][0]) << 16) |
+ ((*coeff)[4][0] << 30), DP_CSC_0(dp));
+ __raw_writel(mask_b((*coeff)[3][1]) | ((*coeff)[4][1] << 14) |
+ (mask_b((*coeff)[3][2]) << 16) |
+ ((*coeff)[4][2] << 30), DP_CSC_1(dp));
+ }
+
+ if (srm_mode_update) {
+ reg = ipu_cm_read(IPU_SRM_PRI2) | 0x8;
+ ipu_cm_write(reg, IPU_SRM_PRI2);
+ }
+}
+
+int ipu_dp_setup_channel(struct ipu_dp *dp, u32 in_pixel_fmt,
+ u32 out_pixel_fmt, int bg)
+{
+ int in_fmt, out_fmt;
+ enum csc_type_t *csc_type;
+ u32 reg;
+
+ ipu_get();
+
+ if (bg)
+ csc_type = &bg_csc_type;
+ else
+ csc_type = &fg_csc_type;
+
+ in_fmt = format_to_colorspace(in_pixel_fmt);
+ out_fmt = format_to_colorspace(out_pixel_fmt);
+
+ if (in_fmt == RGB) {
+ if (out_fmt == RGB)
+ *csc_type = RGB2RGB;
+ else
+ *csc_type = RGB2YUV;
+ } else {
+ if (out_fmt == RGB)
+ *csc_type = YUV2RGB;
+ else
+ *csc_type = YUV2YUV;
+ }
+
+ /* Transform color key from rgb to yuv if CSC is enabled */
+ reg = __raw_readl(DP_COM_CONF(dp->flow));
+ if (color_key_4rgb && (reg & DP_COM_CONF_GWCKE) &&
+ (((fg_csc_type == RGB2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == RGB2YUV)) ||
+ ((fg_csc_type == YUV2YUV) && (bg_csc_type == YUV2YUV)) ||
+ ((fg_csc_type == YUV2RGB) && (bg_csc_type == YUV2RGB)))) {
+ int red, green, blue;
+ int y, u, v;
+ u32 color_key = __raw_readl(DP_GRAPH_WIND_CTRL(dp->flow)) & 0xFFFFFFL;
+
+ dev_dbg(ipu_dev, "_ipu_dp_init color key 0x%x need change to yuv fmt!\n", color_key);
+
+ red = (color_key >> 16) & 0xFF;
+ green = (color_key >> 8) & 0xFF;
+ blue = color_key & 0xFF;
+
+ y = _rgb_to_yuv(0, red, green, blue);
+ u = _rgb_to_yuv(1, red, green, blue);
+ v = _rgb_to_yuv(2, red, green, blue);
+ color_key = (y << 16) | (u << 8) | v;
+
+ reg = __raw_readl(DP_GRAPH_WIND_CTRL(dp->flow)) & 0xFF000000L;
+ __raw_writel(reg | color_key, DP_GRAPH_WIND_CTRL(dp->flow));
+ color_key_4rgb = 0;
+
+ dev_dbg(ipu_dev, "_ipu_dp_init color key change to yuv fmt 0x%x!\n", color_key);
+ }
+
+ __ipu_dp_csc_setup(dp->flow, dp_csc_array[bg_csc_type][fg_csc_type], true);
+
+ ipu_put();
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dp_setup_channel);
+
+int ipu_dp_enable_channel(struct ipu_dp *dp)
+{
+ mutex_lock(&dp_mutex);
+ ipu_get();
+
+ if (!dp_use_count)
+ ipu_module_enable(IPU_CONF_DP_EN);
+
+ dp_use_count++;
+
+ mutex_unlock(&dp_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(ipu_dp_enable_channel);
+
+void ipu_dp_disable_channel(struct ipu_dp *dp)
+{
+ mutex_lock(&dp_mutex);
+
+ dp_use_count--;
+
+ if (!dp_use_count)
+ ipu_module_disable(IPU_CONF_DP_EN);
+
+ if (dp_use_count < 0)
+ dp_use_count = 0;
+
+ ipu_put();
+ mutex_unlock(&dp_mutex);
+}
+EXPORT_SYMBOL(ipu_dp_disable_channel);
+
+void ipu_dp_enable_fg(struct ipu_dp *dp)
+{
+ u32 reg;
+
+ /* Enable FG channel */
+ reg = __raw_readl(DP_COM_CONF(DP_SYNC));
+ __raw_writel(reg | DP_COM_CONF_FG_EN, DP_COM_CONF(DP_SYNC));
+
+ reg = ipu_cm_read(IPU_SRM_PRI2);
+ reg |= 0x8;
+ ipu_cm_write(reg, IPU_SRM_PRI2);
+}
+EXPORT_SYMBOL(ipu_dp_enable_fg);
+
+void ipu_dp_disable_fg(struct ipu_dp *dp)
+{
+ u32 reg, csc;
+
+ ipu_get();
+
+ reg = __raw_readl(DP_COM_CONF(DP_SYNC));
+ csc = reg & DP_COM_CONF_CSC_DEF_MASK;
+ if (csc == DP_COM_CONF_CSC_DEF_FG)
+ reg &= ~DP_COM_CONF_CSC_DEF_MASK;
+
+ reg &= ~DP_COM_CONF_FG_EN;
+ __raw_writel(reg, DP_COM_CONF(DP_SYNC));
+
+ reg = ipu_cm_read(IPU_SRM_PRI2) | 0x8;
+ ipu_cm_write(reg, IPU_SRM_PRI2);
+
+ ipu_put();
+}
+EXPORT_SYMBOL(ipu_dp_disable_fg);
+
+struct ipu_dp *ipu_dp_get(unsigned int flow)
+{
+ struct ipu_dp *dp;
+
+ if (flow > 2)
+ return ERR_PTR(-EINVAL);
+
+ dp = &ipu_dp[flow];
+
+ if (dp->in_use)
+ return ERR_PTR(-EBUSY);
+
+ dp->in_use = true;
+ dp->flow = ipu_flows[flow];
+
+ return dp;
+}
+EXPORT_SYMBOL(ipu_dp_get);
+
+void ipu_dp_put(struct ipu_dp *dp)
+{
+ dp->in_use = false;
+}
+EXPORT_SYMBOL(ipu_dp_put);
+
+int ipu_dp_init(struct platform_device *pdev, unsigned long base)
+{
+ ipu_dp_base = ioremap(base, PAGE_SIZE);
+ if (!ipu_dp_base)
+ return -ENOMEM;
+
+ ipu_dev = &pdev->dev;
+
+ return 0;
+}
+
+void ipu_dp_exit(struct platform_device *pdev)
+{
+ iounmap(ipu_dp_base);
+}
diff --git a/drivers/mfd/imx-ipu-v3/ipu-prv.h b/drivers/mfd/imx-ipu-v3/ipu-prv.h
new file mode 100644
index 0000000..339b554
--- /dev/null
+++ b/drivers/mfd/imx-ipu-v3/ipu-prv.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2010 Sascha Hauer <[email protected]>
+ * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ */
+#ifndef __IPU_PRV_H__
+#define __IPU_PRV_H__
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define MX51_IPU_CHANNEL_CSI0 0
+#define MX51_IPU_CHANNEL_CSI1 1
+#define MX51_IPU_CHANNEL_CSI2 2
+#define MX51_IPU_CHANNEL_CSI3 3
+#define MX51_IPU_CHANNEL_MEM_BG_SYNC 23
+#define MX51_IPU_CHANNEL_MEM_FG_SYNC 27
+#define MX51_IPU_CHANNEL_MEM_DC_SYNC 28
+#define MX51_IPU_CHANNEL_MEM_FG_SYNC_ALPHA 31
+#define MX51_IPU_CHANNEL_MEM_DC_ASYNC 41
+#define MX51_IPU_CHANNEL_ROT_ENC_MEM 45
+#define MX51_IPU_CHANNEL_ROT_VF_MEM 46
+#define MX51_IPU_CHANNEL_ROT_PP_MEM 47
+#define MX51_IPU_CHANNEL_ROT_ENC_MEM_OUT 48
+#define MX51_IPU_CHANNEL_ROT_VF_MEM_OUT 49
+#define MX51_IPU_CHANNEL_ROT_PP_MEM_OUT 50
+#define MX51_IPU_CHANNEL_MEM_BG_SYNC_ALPHA 51
+
+#define IPU_DISP0_BASE 0x00000000
+#define IPU_MCU_T_DEFAULT 8
+#define IPU_DISP1_BASE (IPU_MCU_T_DEFAULT << 25)
+#define IPU_CM_REG_BASE 0x1e000000
+#define IPU_IDMAC_REG_BASE 0x1e008000
+#define IPU_ISP_REG_BASE 0x1e010000
+#define IPU_DP_REG_BASE 0x1e018000
+#define IPU_IC_REG_BASE 0x1e020000
+#define IPU_IRT_REG_BASE 0x1e028000
+#define IPU_CSI0_REG_BASE 0x1e030000
+#define IPU_CSI1_REG_BASE 0x1e038000
+#define IPU_DI0_REG_BASE 0x1e040000
+#define IPU_DI1_REG_BASE 0x1e048000
+#define IPU_SMFC_REG_BASE 0x1e050000
+#define IPU_DC_REG_BASE 0x1e058000
+#define IPU_DMFC_REG_BASE 0x1e060000
+#define IPU_CPMEM_REG_BASE 0x1f000000
+#define IPU_LUT_REG_BASE 0x1f020000
+#define IPU_SRM_REG_BASE 0x1f040000
+#define IPU_TPM_REG_BASE 0x1f060000
+#define IPU_DC_TMPL_REG_BASE 0x1f080000
+#define IPU_ISP_TBPR_REG_BASE 0x1f0c0000
+#define IPU_VDI_REG_BASE 0x1e068000
+
+/* Register addresses */
+/* IPU Common registers */
+#define IPU_CM_REG(offset) (offset)
+
+#define IPU_CONF IPU_CM_REG(0)
+
+#define IPU_SRM_PRI1 IPU_CM_REG(0x00a0)
+#define IPU_SRM_PRI2 IPU_CM_REG(0x00a4)
+#define IPU_FS_PROC_FLOW1 IPU_CM_REG(0x00a8)
+#define IPU_FS_PROC_FLOW2 IPU_CM_REG(0x00ac)
+#define IPU_FS_PROC_FLOW3 IPU_CM_REG(0x00b0)
+#define IPU_FS_DISP_FLOW1 IPU_CM_REG(0x00b4)
+#define IPU_FS_DISP_FLOW2 IPU_CM_REG(0x00b8)
+#define IPU_SKIP IPU_CM_REG(0x00bc)
+#define IPU_DISP_ALT_CONF IPU_CM_REG(0x00c0)
+#define IPU_DISP_GEN IPU_CM_REG(0x00c4)
+#define IPU_DISP_ALT1 IPU_CM_REG(0x00c8)
+#define IPU_DISP_ALT2 IPU_CM_REG(0x00cc)
+#define IPU_DISP_ALT3 IPU_CM_REG(0x00d0)
+#define IPU_DISP_ALT4 IPU_CM_REG(0x00d4)
+#define IPU_SNOOP IPU_CM_REG(0x00d8)
+#define IPU_MEM_RST IPU_CM_REG(0x00dc)
+#define IPU_PM IPU_CM_REG(0x00e0)
+#define IPU_GPR IPU_CM_REG(0x00e4)
+#define IPU_CHA_DB_MODE_SEL(ch) IPU_CM_REG(0x0150 + 4 * ((ch) / 32))
+#define IPU_ALT_CHA_DB_MODE_SEL(ch) IPU_CM_REG(0x0168 + 4 * ((ch) / 32))
+#define IPU_CHA_CUR_BUF(ch) IPU_CM_REG(0x023C + 4 * ((ch) / 32))
+#define IPU_ALT_CUR_BUF0 IPU_CM_REG(0x0244)
+#define IPU_ALT_CUR_BUF1 IPU_CM_REG(0x0248)
+#define IPU_SRM_STAT IPU_CM_REG(0x024C)
+#define IPU_PROC_TASK_STAT IPU_CM_REG(0x0250)
+#define IPU_DISP_TASK_STAT IPU_CM_REG(0x0254)
+#define IPU_CHA_BUF0_RDY(ch) IPU_CM_REG(0x0268 + 4 * ((ch) / 32))
+#define IPU_CHA_BUF1_RDY(ch) IPU_CM_REG(0x0270 + 4 * ((ch) / 32))
+#define IPU_ALT_CHA_BUF0_RDY(ch) IPU_CM_REG(0x0278 + 4 * ((ch) / 32))
+#define IPU_ALT_CHA_BUF1_RDY(ch) IPU_CM_REG(0x0280 + 4 * ((ch) / 32))
+
+#define IPU_INT_CTRL(n) IPU_CM_REG(0x003C + 4 * ((n) - 1))
+#define IPU_INT_CTRL_IRQ(irq) IPU_INT_CTRL(((irq) / 32))
+#define IPU_INT_STAT_IRQ(irq) IPU_INT_STAT(((irq) / 32))
+#define IPU_INT_STAT(n) IPU_CM_REG(0x0200 + 4 * ((n) - 1))
+
+extern void __iomem *ipu_cm_reg;
+
+static inline u32 ipu_cm_read(unsigned offset)
+{
+ return __raw_readl(ipu_cm_reg + offset);
+}
+
+static inline void ipu_cm_write(u32 value, unsigned offset)
+{
+ __raw_writel(value, ipu_cm_reg + offset);
+}
+
+#define IPU_IDMAC_REG(offset) (offset)
+
+#define IDMAC_CONF IPU_IDMAC_REG(0x0000)
+#define IDMAC_CHA_EN(ch) IPU_IDMAC_REG(0x0004 + 4 * ((ch) / 32))
+#define IDMAC_SEP_ALPHA IPU_IDMAC_REG(0x000c)
+#define IDMAC_ALT_SEP_ALPHA IPU_IDMAC_REG(0x0010)
+#define IDMAC_CHA_PRI(ch) IPU_IDMAC_REG(0x0014 + 4 * ((ch) / 32))
+#define IDMAC_WM_EN(ch) IPU_IDMAC_REG(0x001c + 4 * ((ch) / 32))
+#define IDMAC_CH_LOCK_EN_1 IPU_IDMAC_REG(0x0024)
+#define IDMAC_CH_LOCK_EN_2 IPU_IDMAC_REG(0x0028)
+#define IDMAC_SUB_ADDR_0 IPU_IDMAC_REG(0x002c)
+#define IDMAC_SUB_ADDR_1 IPU_IDMAC_REG(0x0030)
+#define IDMAC_SUB_ADDR_2 IPU_IDMAC_REG(0x0034)
+#define IDMAC_BAND_EN(ch) IPU_IDMAC_REG(0x0040 + 4 * ((ch) / 32))
+#define IDMAC_CHA_BUSY(ch) IPU_IDMAC_REG(0x0100 + 4 * ((ch) / 32))
+
+extern void __iomem *ipu_idmac_reg;
+
+static inline u32 ipu_idmac_read(unsigned offset)
+{
+ return __raw_readl(ipu_idmac_reg + offset);
+}
+
+static inline void ipu_idmac_write(u32 value, unsigned offset)
+{
+ __raw_writel(value, ipu_idmac_reg + offset);
+}
+
+#define idmac_idma_is_set(reg, dma) (ipu_idmac_read(reg(dma)) & idma_mask(dma))
+#define idma_mask(ch) (1 << (ch & 0x1f))
+#define ipu_idma_is_set(reg, dma) (ipu_cm_read(reg(dma)) & idma_mask(dma))
+
+enum ipu_modules {
+ IPU_CONF_CSI0_EN = (1 << 0),
+ IPU_CONF_CSI1_EN = (1 << 1),
+ IPU_CONF_IC_EN = (1 << 2),
+ IPU_CONF_ROT_EN = (1 << 3),
+ IPU_CONF_ISP_EN = (1 << 4),
+ IPU_CONF_DP_EN = (1 << 5),
+ IPU_CONF_DI0_EN = (1 << 6),
+ IPU_CONF_DI1_EN = (1 << 7),
+ IPU_CONF_SMFC_EN = (1 << 8),
+ IPU_CONF_DC_EN = (1 << 9),
+ IPU_CONF_DMFC_EN = (1 << 10),
+
+ IPU_CONF_VDI_EN = (1 << 12),
+
+ IPU_CONF_IDMAC_DIS = (1 << 22),
+
+ IPU_CONF_IC_DMFC_SEL = (1 << 25),
+ IPU_CONF_IC_DMFC_SYNC = (1 << 26),
+ IPU_CONF_VDI_DMFC_SYNC = (1 << 27),
+
+ IPU_CONF_CSI0_DATA_SOURCE = (1 << 28),
+ IPU_CONF_CSI1_DATA_SOURCE = (1 << 29),
+ IPU_CONF_IC_INPUT = (1 << 30),
+ IPU_CONF_CSI_SEL = (1 << 31),
+};
+
+struct ipu_channel {
+ unsigned int num;
+
+ bool enabled;
+ bool busy;
+};
+
+ipu_color_space_t format_to_colorspace(u32 fmt);
+bool ipu_pixel_format_has_alpha(u32 fmt);
+
+u32 _ipu_channel_status(struct ipu_channel *channel);
+
+int _ipu_chan_is_interlaced(struct ipu_channel *channel);
+
+int ipu_module_enable(u32 mask);
+int ipu_module_disable(u32 mask);
+
+int ipu_di_init(struct platform_device *pdev, int id, unsigned long base,
+ u32 module, struct clk *ipu_clk);
+void ipu_di_exit(struct platform_device *pdev, int id);
+
+int ipu_dmfc_init(struct platform_device *pdev, unsigned long base,
+ struct clk *ipu_clk);
+void ipu_dmfc_exit(struct platform_device *pdev);
+
+int ipu_dp_init(struct platform_device *pdev, unsigned long base);
+void ipu_dp_exit(struct platform_device *pdev);
+
+int ipu_dc_init(struct platform_device *pdev, unsigned long base,
+ unsigned long template_base);
+void ipu_dc_exit(struct platform_device *pdev);
+
+int ipu_cpmem_init(struct platform_device *pdev, unsigned long base);
+void ipu_cpmem_exit(struct platform_device *pdev);
+
+void ipu_get(void);
+void ipu_put(void);
+
+#endif /* __IPU_PRV_H__ */
diff --git a/include/linux/mfd/imx-ipu-v3.h b/include/linux/mfd/imx-ipu-v3.h
new file mode 100644
index 0000000..7243360
--- /dev/null
+++ b/include/linux/mfd/imx-ipu-v3.h
@@ -0,0 +1,219 @@
+/*
+ * Copyright 2005-2009 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU Lesser General
+ * Public License. You may obtain a copy of the GNU Lesser General
+ * Public License Version 2.1 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/lgpl-license.html
+ * http://www.gnu.org/copyleft/lgpl.html
+ */
+
+#ifndef __ASM_ARCH_IPU_H__
+#define __ASM_ARCH_IPU_H__
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+#include <linux/bitmap.h>
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+typedef enum {
+ /* Note the enum values correspond to BAM value */
+ IPU_ROTATE_NONE = 0,
+ IPU_ROTATE_VERT_FLIP = 1,
+ IPU_ROTATE_HORIZ_FLIP = 2,
+ IPU_ROTATE_180 = 3,
+ IPU_ROTATE_90_RIGHT = 4,
+ IPU_ROTATE_90_RIGHT_VFLIP = 5,
+ IPU_ROTATE_90_RIGHT_HFLIP = 6,
+ IPU_ROTATE_90_LEFT = 7,
+} ipu_rotate_mode_t;
+
+/*
+ * IPU Pixel Formats
+ *
+ * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are
+ * the same used by V4L2 API.
+ */
+
+/* Generic or Raw Data Formats */
+#define IPU_PIX_FMT_GENERIC v4l2_fourcc('I', 'P', 'U', '0') /* IPU Generic Data */
+#define IPU_PIX_FMT_GENERIC_32 v4l2_fourcc('I', 'P', 'U', '1') /* IPU Generic Data */
+#define IPU_PIX_FMT_LVDS666 v4l2_fourcc('L', 'V', 'D', '6') /* IPU Generic Data */
+#define IPU_PIX_FMT_LVDS888 v4l2_fourcc('L', 'V', 'D', '8') /* IPU Generic Data */
+/* RGB Formats */
+#define IPU_PIX_FMT_RGB332 V4L2_PIX_FMT_RGB332 /* 8 RGB-3-3-2 */
+#define IPU_PIX_FMT_RGB555 V4L2_PIX_FMT_RGB555 /* 16 RGB-5-5-5 */
+#define IPU_PIX_FMT_RGB565 V4L2_PIX_FMT_RGB565 /* 1 6 RGB-5-6-5 */
+#define IPU_PIX_FMT_RGB666 v4l2_fourcc('R', 'G', 'B', '6') /* 18 RGB-6-6-6 */
+#define IPU_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', '6') /* 18 BGR-6-6-6 */
+#define IPU_PIX_FMT_BGR24 V4L2_PIX_FMT_BGR24 /* 24 BGR-8-8-8 */
+#define IPU_PIX_FMT_RGB24 V4L2_PIX_FMT_RGB24 /* 24 RGB-8-8-8 */
+#define IPU_PIX_FMT_BGR32 V4L2_PIX_FMT_BGR32 /* 32 BGR-8-8-8-8 */
+#define IPU_PIX_FMT_BGRA32 v4l2_fourcc('B', 'G', 'R', 'A') /* 32 BGR-8-8-8-8 */
+#define IPU_PIX_FMT_RGB32 V4L2_PIX_FMT_RGB32 /* 32 RGB-8-8-8-8 */
+#define IPU_PIX_FMT_RGBA32 v4l2_fourcc('R', 'G', 'B', 'A') /* 32 RGB-8-8-8-8 */
+#define IPU_PIX_FMT_ABGR32 v4l2_fourcc('A', 'B', 'G', 'R') /* 32 ABGR-8-8-8-8 */
+/* YUV Interleaved Formats */
+#define IPU_PIX_FMT_YUYV V4L2_PIX_FMT_YUYV /* 16 YUV 4:2:2 */
+#define IPU_PIX_FMT_UYVY V4L2_PIX_FMT_UYVY /* 16 YUV 4:2:2 */
+#define IPU_PIX_FMT_Y41P V4L2_PIX_FMT_Y41P /* 12 YUV 4:1:1 */
+#define IPU_PIX_FMT_YUV444 V4L2_PIX_FMT_YUV444 /* 24 YUV 4:4:4 */
+/* two planes -- one Y, one Cb + Cr interleaved */
+#define IPU_PIX_FMT_NV12 V4L2_PIX_FMT_NV12 /* 12 Y/CbCr 4:2:0 */
+/* YUV Planar Formats */
+#define IPU_PIX_FMT_GREY V4L2_PIX_FMT_GREY /* 8 Greyscale */
+#define IPU_PIX_FMT_YVU410P V4L2_PIX_FMT_YVU410P /* 9 YVU 4:1:0 */
+#define IPU_PIX_FMT_YUV410P V4L2_PIX_FMT_YUV410P /* 9 YUV 4:1:0 */
+#define IPU_PIX_FMT_YVU420P v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */
+#define IPU_PIX_FMT_YUV420P v4l2_fourcc('I', '4', '2', '0') /* 12 YUV 4:2:0 */
+#define IPU_PIX_FMT_YUV420P2 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */
+#define IPU_PIX_FMT_YVU422P v4l2_fourcc('Y', 'V', '1', '6') /* 16 YVU 4:2:2 */
+#define IPU_PIX_FMT_YUV422P V4L2_PIX_FMT_YUV422P /* 16 YUV 4:2:2 */
+
+/*
+ * Bitfield of Display Interface signal polarities.
+ */
+struct ipu_di_signal_cfg {
+ unsigned datamask_en:1;
+ unsigned ext_clk:1;
+ unsigned interlaced:1;
+ unsigned odd_field_first:1;
+ unsigned clksel_en:1;
+ unsigned clkidle_en:1;
+ unsigned data_pol:1; /* true = inverted */
+ unsigned clk_pol:1; /* true = rising edge */
+ unsigned enable_pol:1;
+ unsigned Hsync_pol:1; /* true = active high */
+ unsigned Vsync_pol:1;
+
+ u16 width;
+ u16 height;
+ u32 pixel_fmt;
+ u16 h_start_width;
+ u16 h_sync_width;
+ u16 h_end_width;
+ u16 v_start_width;
+ u16 v_sync_width;
+ u16 v_end_width;
+ u32 v_to_h_sync;
+};
+
+typedef enum {
+ RGB,
+ YCbCr,
+ YUV
+} ipu_color_space_t;
+
+#define IPU_IRQ_EOF(channel) (channel) /* 0 .. 63 */
+#define IPU_IRQ_NFACK(channel) ((channel) + 64) /* 64 .. 127 */
+#define IPU_IRQ_NFB4EOF(channel) ((channel) + 128) /* 128 .. 191 */
+#define IPU_IRQ_EOS(channel) ((channel) + 192) /* 192 .. 255 */
+
+#define IPU_IRQ_DP_SF_START (448 + 2)
+#define IPU_IRQ_DP_SF_END (448 + 3)
+#define IPU_IRQ_BG_SF_END IPU_IRQ_DP_SF_END,
+#define IPU_IRQ_DC_FC_0 (448 + 8)
+#define IPU_IRQ_DC_FC_1 (448 + 9)
+#define IPU_IRQ_DC_FC_2 (448 + 10)
+#define IPU_IRQ_DC_FC_3 (448 + 11)
+#define IPU_IRQ_DC_FC_4 (448 + 12)
+#define IPU_IRQ_DC_FC_6 (448 + 13)
+#define IPU_IRQ_VSYNC_PRE_0 (448 + 14)
+#define IPU_IRQ_VSYNC_PRE_1 (448 + 15)
+
+#define IPU_IRQ_COUNT (15 * 32)
+
+#define DECLARE_IPU_IRQ_BITMAP(name) DECLARE_BITMAP(name, IPU_IRQ_COUNT)
+
+struct ipu_irq_handler {
+ struct list_head list;
+ void (*handler)(unsigned long *, void *);
+ void *context;
+ DECLARE_IPU_IRQ_BITMAP(ipu_irqs);
+};
+
+int ipu_irq_add_handler(struct ipu_irq_handler *ipuirq);
+void ipu_irq_remove_handler(struct ipu_irq_handler *handler);
+int ipu_irq_update_handler(struct ipu_irq_handler *handler,
+ unsigned long *bitmap);
+int ipu_wait_for_interrupt(int interrupt, int timeout_ms);
+
+struct ipu_channel;
+
+/*
+ * IPU Image DMA Controller (idmac) functions
+ */
+struct ipu_channel *ipu_idmac_get(unsigned channel);
+void ipu_idmac_put(struct ipu_channel *);
+int ipu_idmac_init_channel_buffer(struct ipu_channel *channel,
+ u32 pixel_fmt,
+ u16 width, u16 height,
+ u32 stride,
+ ipu_rotate_mode_t rot_mode,
+ dma_addr_t phyaddr_0, dma_addr_t phyaddr_1,
+ u32 u_offset, u32 v_offset, bool interlaced);
+
+int ipu_idmac_update_channel_buffer(struct ipu_channel *channel,
+ u32 bufNum, dma_addr_t phyaddr);
+
+int ipu_idmac_enable_channel(struct ipu_channel *channel);
+int ipu_idmac_disable_channel(struct ipu_channel *channel);
+
+void ipu_idmac_set_double_buffer(struct ipu_channel *channel, bool doublebuffer);
+void ipu_idmac_select_buffer(struct ipu_channel *channel, u32 buf_num);
+
+/*
+ * IPU Display Controller (dc) functions
+ */
+int ipu_dc_init_sync(int dc_chan, int di, bool interlaced, u32 pixel_fmt, u32 width);
+void ipu_dc_init_async(int dc_chan, int di, bool interlaced);
+void ipu_dc_enable_channel(u32 dc_chan);
+void ipu_dc_disable_channel(u32 dc_chan);
+
+/*
+ * IPU Display Interface (di) functions
+ */
+struct ipu_di;
+struct ipu_di *ipu_di_get(int disp);
+void ipu_di_put(struct ipu_di *);
+int ipu_di_disable(struct ipu_di *);
+int ipu_di_enable(struct ipu_di *);
+int ipu_di_init_sync_panel(struct ipu_di *, u32 pixel_clk,
+ struct ipu_di_signal_cfg *sig);
+
+/*
+ * IPU Display Multi FIFO Controller (dmfc) functions
+ */
+struct dmfc_channel;
+int ipu_dmfc_enable_channel(struct dmfc_channel *dmfc);
+void ipu_dmfc_disable_channel(struct dmfc_channel *dmfc);
+int ipu_dmfc_alloc_bandwidth(struct dmfc_channel *dmfc, unsigned long bandwidth_mbs);
+void ipu_dmfc_free_bandwidth(struct dmfc_channel *dmfc);
+int ipu_dmfc_init_channel(struct dmfc_channel *dmfc, int width);
+struct dmfc_channel *ipu_dmfc_get(int ipu_channel);
+void ipu_dmfc_put(struct dmfc_channel *dmfc);
+
+/*
+ * IPU Display Processor (dp) functions
+ */
+#define IPU_DP_FLOW_SYNC 0
+#define IPU_DP_FLOW_ASYNC0 1
+#define IPU_DP_FLOW_ASYNC1 2
+
+struct ipu_dp *ipu_dp_get(unsigned int flow);
+void ipu_dp_put(struct ipu_dp *);
+int ipu_dp_enable_channel(struct ipu_dp *dp);
+void ipu_dp_disable_channel(struct ipu_dp *dp);
+void ipu_dp_enable_fg(struct ipu_dp *dp);
+void ipu_dp_disable_fg(struct ipu_dp *dp);
+int ipu_dp_setup_channel(struct ipu_dp *dp, u32 in_pixel_fmt,
+ u32 out_pixel_fmt, int bg);
+int ipu_dp_set_window_pos(struct ipu_dp *, u16 x_pos, u16 y_pos);
+int ipu_dp_set_color_key(struct ipu_dp *dp, bool enable, u32 colorKey);
+int ipu_dp_set_global_alpha(struct ipu_dp *dp, bool enable, u8 alpha,
+ bool bg_chan);
+
+#endif
--
1.7.2.3

2010-12-20 10:50:31

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 1/9] ARM i.MX51: Add ipu clock support

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/mach-mx5/clock-mx51-mx53.c | 140 +++++++++++++++++++++++++++++++++++
1 files changed, 140 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 9fc65bb..f550d02 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -39,6 +39,9 @@ static struct clk periph_apm_clk;
static struct clk ahb_clk;
static struct clk ipg_clk;
static struct clk usboh3_clk;
+static struct clk emi_fast_clk;
+static struct clk ipu_clk;
+static struct clk mipi_hsc1_clk;

#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */

@@ -688,6 +691,19 @@ static unsigned long clk_emi_slow_get_rate(struct clk *clk)
return clk_get_rate(clk->parent) / div;
}

+static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+ u32 reg, div;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
+ MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
+ rate = clk_get_rate(clk->parent) / div;
+
+ return rate;
+}
+
/* External high frequency clock */
static struct clk ckih_clk = {
.get_rate = get_high_reference_clock_rate,
@@ -846,6 +862,109 @@ static struct clk emi_slow_clk = {
.get_rate = clk_emi_slow_get_rate,
};

+static int clk_ipu_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+
+ /* Enable handshake with IPU when certain clock rates are changed */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ /* Enable handshake with IPU when LPM is entered */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void clk_ipu_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable(clk);
+
+ /* Disable handshake with IPU whe dividers are changed */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg |= MXC_CCM_CCDR_IPU_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ /* Disable handshake with IPU when LPM is entered */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static struct clk ahbmux1_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk ipu_sec_clk = {
+ .parent = &emi_fast_clk,
+ .secondary = &ahbmux1_clk,
+};
+
+static struct clk ddr_hf_clk = {
+ .parent = &pll1_sw_clk,
+ .get_rate = _clk_ddr_hf_get_rate,
+};
+
+static struct clk ddr_clk = {
+ .parent = &ddr_hf_clk,
+};
+
+/* clock definitions for MIPI HSC unit which has been removed
+ * from documentation, but not from hardware
+ */
+static int _clk_hsc_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+ /* Handshake with IPU when certain clock rates are changed. */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void _clk_hsc_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable(clk);
+ /* No handshake with HSC as its not enabled. */
+ reg = __raw_readl(MXC_CCM_CCDR);
+ reg |= MXC_CCM_CCDR_HSC_HS_MASK;
+ __raw_writel(reg, MXC_CCM_CCDR);
+
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static struct clk mipi_hsp_clk = {
+ .parent = &ipu_clk,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
+ .enable = _clk_hsc_enable,
+ .disable = _clk_hsc_disable,
+ .secondary = &mipi_hsc1_clk,
+};
+
#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
static struct clk name = { \
.id = i, \
@@ -1077,6 +1196,23 @@ DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);

+DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
+DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
+DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
+
+/* IPU */
+DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
+
+DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
+ &ddr_clk, NULL);
+
+DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &pll3_sw_clk, NULL);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -1117,6 +1253,10 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+ _REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
+ _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
+ _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
+ _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
};

static struct clk_lookup mx53_lookups[] = {
--
1.7.2.3

2010-12-20 10:50:35

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/mach-mx5/Kconfig | 1 +
arch/arm/mach-mx5/board-mx51_babbage.c | 74 ++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 5011f42..2a936b7 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -22,6 +22,7 @@ config MACH_MX51_BABBAGE
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
+ select IMX_HAVE_PLATFORM_IMX_IPUV3
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 368a315..6c1576c 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -22,11 +22,13 @@
#include <linux/input.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
+#include <linux/mfd/imx-ipu-v3.h>

#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
#include <mach/mxc_ehci.h>
+#include <mach/ipu-v3.h>

#include <asm/irq.h>
#include <asm/setup.h>
@@ -158,6 +160,41 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
MX51_PAD_CSPI1_SS0__GPIO_4_24,
MX51_PAD_CSPI1_SS1__GPIO_4_25,
+
+ /* Display */
+ MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
+ MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
+ MX51_PAD_NANDF_D12__GPIO_3_28,
+
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0,
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1,
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2,
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3,
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4,
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5,
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6,
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7,
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8,
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9,
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10,
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11,
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12,
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13,
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14,
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15,
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16,
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17,
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18,
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19,
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20,
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21,
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22,
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23,
+#define MX51_PAD_DI_GP4__IPU_DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0, 0, NO_PAD_CTRL)
+ MX51_PAD_DI_GP4__IPU_DI2_PIN15,
+
+ /* I2C DVI enable */
+ MX51_PAD_CSI2_HSYNC__GPIO_4_14,
};

/* Serial ports */
@@ -346,6 +383,23 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
};

+static struct ipuv3_fb_platform_data babbage_fb0_data = {
+ .interface_pix_fmt = IPU_PIX_FMT_RGB24,
+ .flags = IMX_IPU_FB_USE_MODEDB | IMX_IPU_FB_USE_OVERLAY,
+ .display = 0,
+};
+
+static struct ipuv3_fb_platform_data babbage_fb1_data = {
+ .interface_pix_fmt = IPU_PIX_FMT_RGB565,
+ .flags = IMX_IPU_FB_USE_MODEDB,
+ .display = 1,
+};
+
+static struct imx_ipuv3_platform_data ipu_data = {
+ .fb_head0_platform_data = &babbage_fb0_data,
+ .fb_head1_platform_data = &babbage_fb1_data,
+};
+
/*
* Board specific initialization.
*/
@@ -392,6 +446,26 @@ static void __init mxc_board_init(void)
ARRAY_SIZE(mx51_babbage_spi_board_info));
imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
imx51_add_imx2_wdt(0, NULL);
+
+#define GPIO_DVI_DETECT (2 * 32 + 28)
+#define GPIO_DVI_RESET (2 * 32 + 5)
+#define GPIO_DVI_PWRDN (2 * 32 + 6)
+#define GPIO_DVI_I2C (3 * 32 + 14)
+
+ /* DVI Detect */
+ gpio_request(GPIO_DVI_DETECT, "dvi detect");
+ gpio_direction_input(GPIO_DVI_DETECT);
+ /* DVI Reset - Assert for i2c disabled mode */
+ gpio_request(GPIO_DVI_RESET, "dvi reset");
+ gpio_direction_output(GPIO_DVI_RESET, 0);
+ /* DVI Power-down */
+ gpio_request(GPIO_DVI_PWRDN, "dvi pwdn");
+ gpio_direction_output(GPIO_DVI_PWRDN, 1);
+
+ gpio_request(GPIO_DVI_I2C, "dvi i2c");
+ gpio_direction_output(GPIO_DVI_I2C, 0);
+
+ imx51_add_ipuv3(&ipu_data);
}

static void __init mx51_babbage_timer_init(void)
--
1.7.2.3

2010-12-20 10:50:29

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 6/9] ARM i.MX51: Add IPU device support

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/mach-mx5/devices-imx51.h | 4 ++
arch/arm/plat-mxc/devices/Kconfig | 4 ++
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-imx_ipuv3.c | 47 +++++++++++++++++++++++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 +++++
5 files changed, 66 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-imx_ipuv3.c

diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 6302e46..851c114 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -47,3 +47,7 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
#define imx51_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
+
+extern const struct imx_ipuv3_data imx51_ipuv3_data __initconst;
+#define imx51_add_ipuv3(pdata) \
+ imx_add_ipuv3(&imx51_ipuv3_data, pdata)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 2537166..262d9c5 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -71,3 +71,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX

config IMX_HAVE_PLATFORM_SPI_IMX
bool
+
+config IMX_HAVE_PLATFORM_IMX_IPUV3
+ bool
+
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 75cd2ec..0a6be0a 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_IPUV3) += platform-imx_ipuv3.o
diff --git a/arch/arm/plat-mxc/devices/platform-imx_ipuv3.c b/arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
new file mode 100644
index 0000000..2c6b913
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx_ipuv3.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx51_ipuv3_data_entry_single(soc) \
+ { \
+ .iobase = soc ## _IPU_CTRL_BASE_ADDR, \
+ .irq_err = soc ## _INT_IPU_ERR, \
+ .irq = soc ## _INT_IPU_SYN, \
+ }
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_ipuv3_data imx51_ipuv3_data __initconst =
+ imx51_ipuv3_data_entry_single(MX51);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_ipuv3(
+ const struct imx_ipuv3_data *data,
+ const struct imx_ipuv3_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_512M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq_err,
+ .end = data->irq_err,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx-ipuv3", -1,
+ res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
+
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8658c9c..8f5197f 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -264,3 +264,13 @@ struct imx_spi_imx_data {
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
+
+#include <mach/ipu-v3.h>
+struct imx_ipuv3_data {
+ resource_size_t iobase;
+ resource_size_t irq_err;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_ipuv3(
+ const struct imx_ipuv3_data *data,
+ const struct imx_ipuv3_platform_data *pdata);
--
1.7.2.3

2010-12-20 10:50:27

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 7/9] ARM i.MX5: Allow to increase max zone order

default setting of 11 allows us to allocate at maximum
2MB chunks of contiguous memory. For resolutions up to
1920x1080 32bpp we need much more memory, so make zone
order configurable

Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/Kconfig | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index db524e7..b3e070e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1410,8 +1410,8 @@ config SPARSE_IRQ
source "mm/Kconfig"

config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE
- range 11 64 if ARCH_SHMOBILE
+ int "Maximum zone order" if ARCH_SHMOBILE || ARCH_MX5
+ range 11 64 if ARCH_SHMOBILE || ARCH_MX5
default "9" if SA1111
default "11"
help
--
1.7.2.3

2010-12-20 10:50:25

by Sascha Hauer

[permalink] [raw]
Subject: [PATCH 4/9] fb: export fb mode db table

The different modes can be useful for drivers. Currently there is
no way to expose the modes to sysfs, so export them.

Signed-off-by: Sascha Hauer <[email protected]>
---
drivers/video/modedb.c | 7 ++++++-
include/linux/fb.h | 3 +++
2 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 0a4dbdc..82122a9 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -36,7 +36,7 @@ EXPORT_SYMBOL_GPL(fb_mode_option);
* Standard video mode definitions (taken from XFree86)
*/

-static const struct fb_videomode modedb[] = {
+const struct fb_videomode modedb[] = {
{
/* 640x400 @ 70 Hz, 31.5 kHz hsync */
NULL, 70, 640, 400, 39721, 40, 24, 39, 9, 96, 2,
@@ -277,6 +277,11 @@ static const struct fb_videomode modedb[] = {
},
};

+const struct fb_videomode *fb_modes = modedb;
+EXPORT_SYMBOL(fb_modes);
+const int num_fb_modes = ARRAY_SIZE(modedb);
+EXPORT_SYMBOL(num_fb_modes);
+
#ifdef CONFIG_FB_MODE_HELPERS
const struct fb_videomode vesa_modes[] = {
/* 0 640x350-85 VESA */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index d1631d3..e006172 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1151,6 +1151,9 @@ struct fb_videomode {
extern const char *fb_mode_option;
extern const struct fb_videomode vesa_modes[];

+extern const struct fb_videomode *fb_modes;
+extern const int num_fb_modes;
+
struct fb_modelist {
struct list_head list;
struct fb_videomode mode;
--
1.7.2.3

2010-12-20 12:35:21

by arden jay

[permalink] [raw]
Subject: Re: [PATCH 9/9] ARM i.MX51 babbage: Add framebuffer support

Hi Sascha,

2010/12/20 Sascha Hauer <[email protected]>:
> Signed-off-by: Sascha Hauer <[email protected]>
> ---
> ?arch/arm/mach-mx5/Kconfig ? ? ? ? ? ? ?| ? ?1 +
> ?arch/arm/mach-mx5/board-mx51_babbage.c | ? 74 ++++++++++++++++++++++++++++++++
> ?2 files changed, 75 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
> index 5011f42..2a936b7 100644
> --- a/arch/arm/mach-mx5/Kconfig
> +++ b/arch/arm/mach-mx5/Kconfig
> @@ -22,6 +22,7 @@ config MACH_MX51_BABBAGE
> ? ? ? ?select IMX_HAVE_PLATFORM_IMX_UART
> ? ? ? ?select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
> ? ? ? ?select IMX_HAVE_PLATFORM_SPI_IMX
> + ? ? ? select IMX_HAVE_PLATFORM_IMX_IPUV3
> ? ? ? ?help
> ? ? ? ? ?Include support for MX51 Babbage platform, also known as MX51EVK in
> ? ? ? ? ?u-boot. This includes specific configurations for the board and its
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index 368a315..6c1576c 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -22,11 +22,13 @@
> ?#include <linux/input.h>
> ?#include <linux/spi/flash.h>
> ?#include <linux/spi/spi.h>
> +#include <linux/mfd/imx-ipu-v3.h>
>
> ?#include <mach/common.h>
> ?#include <mach/hardware.h>
> ?#include <mach/iomux-mx51.h>
> ?#include <mach/mxc_ehci.h>
> +#include <mach/ipu-v3.h>
>
Why it needs imx-ipu-v3.h and ipu-v3.h?

> ?#include <asm/irq.h>
> ?#include <asm/setup.h>
> @@ -158,6 +160,41 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
> ? ? ? ?MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
> ? ? ? ?MX51_PAD_CSPI1_SS0__GPIO_4_24,
> ? ? ? ?MX51_PAD_CSPI1_SS1__GPIO_4_25,
> +
> + ? ? ? /* Display */
> + ? ? ? MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
> + ? ? ? MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
> + ? ? ? MX51_PAD_NANDF_D12__GPIO_3_28,
> +
> + ? ? ? MX51_PAD_DISP1_DAT0__DISP1_DAT0,
> + ? ? ? MX51_PAD_DISP1_DAT1__DISP1_DAT1,
> + ? ? ? MX51_PAD_DISP1_DAT2__DISP1_DAT2,
> + ? ? ? MX51_PAD_DISP1_DAT3__DISP1_DAT3,
> + ? ? ? MX51_PAD_DISP1_DAT4__DISP1_DAT4,
> + ? ? ? MX51_PAD_DISP1_DAT5__DISP1_DAT5,
> + ? ? ? MX51_PAD_DISP1_DAT6__DISP1_DAT6,
> + ? ? ? MX51_PAD_DISP1_DAT7__DISP1_DAT7,
> + ? ? ? MX51_PAD_DISP1_DAT8__DISP1_DAT8,
> + ? ? ? MX51_PAD_DISP1_DAT9__DISP1_DAT9,
> + ? ? ? MX51_PAD_DISP1_DAT10__DISP1_DAT10,
> + ? ? ? MX51_PAD_DISP1_DAT11__DISP1_DAT11,
> + ? ? ? MX51_PAD_DISP1_DAT12__DISP1_DAT12,
> + ? ? ? MX51_PAD_DISP1_DAT13__DISP1_DAT13,
> + ? ? ? MX51_PAD_DISP1_DAT14__DISP1_DAT14,
> + ? ? ? MX51_PAD_DISP1_DAT15__DISP1_DAT15,
> + ? ? ? MX51_PAD_DISP1_DAT16__DISP1_DAT16,
> + ? ? ? MX51_PAD_DISP1_DAT17__DISP1_DAT17,
> + ? ? ? MX51_PAD_DISP1_DAT18__DISP1_DAT18,
> + ? ? ? MX51_PAD_DISP1_DAT19__DISP1_DAT19,
> + ? ? ? MX51_PAD_DISP1_DAT20__DISP1_DAT20,
> + ? ? ? MX51_PAD_DISP1_DAT21__DISP1_DAT21,
> + ? ? ? MX51_PAD_DISP1_DAT22__DISP1_DAT22,
> + ? ? ? MX51_PAD_DISP1_DAT23__DISP1_DAT23,
> +#define MX51_PAD_DI_GP4__IPU_DI2_PIN15 ? ? ? ? ? ? ? ? IOMUX_PAD(0x758, 0x350, 4, 0x0, ? 0, NO_PAD_CTRL)
> + ? ? ? MX51_PAD_DI_GP4__IPU_DI2_PIN15,
> +
> + ? ? ? /* I2C DVI enable */
> + ? ? ? MX51_PAD_CSI2_HSYNC__GPIO_4_14,
> ?};
>
> ?/* Serial ports */
> @@ -346,6 +383,23 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
> ? ? ? ?.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
> ?};
>
> +static struct ipuv3_fb_platform_data babbage_fb0_data = {
> + ? ? ? .interface_pix_fmt = IPU_PIX_FMT_RGB24,
> + ? ? ? .flags = IMX_IPU_FB_USE_MODEDB | IMX_IPU_FB_USE_OVERLAY,
> + ? ? ? .display = 0,
> +};
> +
> +static struct ipuv3_fb_platform_data babbage_fb1_data = {
> + ? ? ? .interface_pix_fmt = IPU_PIX_FMT_RGB565,
> + ? ? ? .flags = IMX_IPU_FB_USE_MODEDB,
> + ? ? ? .display = 1,
> +};
> +
> +static struct imx_ipuv3_platform_data ipu_data = {
> + ? ? ? .fb_head0_platform_data = &babbage_fb0_data,
> + ? ? ? .fb_head1_platform_data = &babbage_fb1_data,
> +};
> +
> ?/*
> ?* Board specific initialization.
> ?*/
> @@ -392,6 +446,26 @@ static void __init mxc_board_init(void)
> ? ? ? ? ? ? ? ?ARRAY_SIZE(mx51_babbage_spi_board_info));
> ? ? ? ?imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
> ? ? ? ?imx51_add_imx2_wdt(0, NULL);
> +
> +#define GPIO_DVI_DETECT ? ? ? ?(2 * 32 + 28)
> +#define GPIO_DVI_RESET (2 * 32 + 5)
> +#define GPIO_DVI_PWRDN (2 * 32 + 6)
> +#define GPIO_DVI_I2C ? (3 * 32 + 14)
This should be in board-xxx.h.

> +
> + ? ? ? /* DVI Detect */
> + ? ? ? gpio_request(GPIO_DVI_DETECT, "dvi detect");
> + ? ? ? gpio_direction_input(GPIO_DVI_DETECT);
> + ? ? ? /* DVI Reset - Assert for i2c disabled mode */
> + ? ? ? gpio_request(GPIO_DVI_RESET, "dvi reset");
> + ? ? ? gpio_direction_output(GPIO_DVI_RESET, 0);
> + ? ? ? /* DVI Power-down */
> + ? ? ? gpio_request(GPIO_DVI_PWRDN, "dvi pwdn");
> + ? ? ? gpio_direction_output(GPIO_DVI_PWRDN, 1);
> +
> + ? ? ? gpio_request(GPIO_DVI_I2C, "dvi i2c");
> + ? ? ? gpio_direction_output(GPIO_DVI_I2C, 0);
> +
Can this implement as function, and passes to specified driver who needs it?

> + ? ? ? imx51_add_ipuv3(&ipu_data);
> ?}
>
> ?static void __init mx51_babbage_timer_init(void)
> --
> 1.7.2.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at ?http://www.tux.org/lkml/
>



--
cheers,
jay

2010-12-22 07:52:53

by Arnaud Patard

[permalink] [raw]
Subject: Re: [PATCH v2] i.MX51 Framebuffer support

Sascha Hauer <[email protected]> writes:

Hi,

> The following series adds i.MX51 framebuffer support based on the IPUv3. It
> is not perfect but I decided it is good enough to open it for a wider audience
> and collect first reviews. I tested this on a babbage board using both outputs
> (VGA/DVI) with different resolutions up to 1680x1050 and different colour depths.
> I also tested it on one custom board using a fixed display setting.

After adding code to my efika sb machine file and your patchset, I've
seen the light. Err, no. It was a penguin and a login prompt. I guess
it means your patchset is working here.

btw, would be nice to add some comments/docs about :
- the meaning of the fields of the imx_ipuv3_platform_data struct. it's
not clear
- same for .display field of the ipuv3_fb_platform_data

Arnaud

2010-12-22 10:18:13

by Peter Korsgaard

[permalink] [raw]
Subject: Re: [PATCH v2] i.MX51 Framebuffer support

>>>>> "Arnaud" == Arnaud Patard (Rtp) <[email protected]> writes:

Arnaud> Sascha Hauer <[email protected]> writes:
Arnaud> Hi,

>> The following series adds i.MX51 framebuffer support based on the
>> IPUv3. It is not perfect but I decided it is good enough to open it
>> for a wider audience and collect first reviews. I tested this on a
>> babbage board using both outputs (VGA/DVI) with different
>> resolutions up to 1680x1050 and different colour depths. I also
>> tested it on one custom board using a fixed display setting.

Arnaud> After adding code to my efika sb machine file and your patchset, I've
Arnaud> seen the light. Err, no. It was a penguin and a login prompt. I guess
Arnaud> it means your patchset is working here.

Cool. Care to submit that machine file support?

--
Bye, Peter Korsgaard

2010-12-23 20:41:23

by Arnaud Patard

[permalink] [raw]
Subject: Re: [PATCH v2] i.MX51 Framebuffer support

Peter Korsgaard <[email protected]> writes:
Hi,

>>>>>> "Arnaud" == Arnaud Patard (Rtp) <[email protected]> writes:
>
> Arnaud> Sascha Hauer <[email protected]> writes:
> Arnaud> Hi,
>
> >> The following series adds i.MX51 framebuffer support based on the
> >> IPUv3. It is not perfect but I decided it is good enough to open it
> >> for a wider audience and collect first reviews. I tested this on a
> >> babbage board using both outputs (VGA/DVI) with different
> >> resolutions up to 1680x1050 and different colour depths. I also
> >> tested it on one custom board using a fixed display setting.
>
> Arnaud> After adding code to my efika sb machine file and your patchset, I've
> Arnaud> seen the light. Err, no. It was a penguin and a login prompt. I guess
> Arnaud> it means your patchset is working here.
>
> Cool. Care to submit that machine file support?

Yes, I will (of course) but ... I'd like to see the usb issues I found
fixed because they're the only way to get usb on the sb and without usb,
you have no network, no keyboard, no way to connect any external device,
which makes the sb pretty useless. In the mean time, you can use my
patchset once I've added the fb support in it.

Arnaud

2011-02-01 10:51:32

by Samuel Ortiz

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

Hi Sascha,

On Mon, Dec 20, 2010 at 11:48:41AM +0100, Sascha Hauer wrote:
> The IPU is the Image Processing Unit found on i.MX50/51/53 SoCs. It
> features several units for image processing, this patch adds support
> for the units needed for Framebuffer support, namely:
>
> - Display Controller (dc)
> - Display Interface (di)
> - Display Multi Fifo Controller (dmfc)
> - Display Processor (dp)
> - Image DMA Controller (idmac)
>
> This patch is based on the Freescale driver, but follows a different
> approach. The Freescale code implements logical idmac channels and
> the handling of the subunits is hidden in common idmac code pathes
> in big switch/case statements. This patch instead just provides code
> and resource management for the different subunits. The user, in this
> case the framebuffer driver, decides how the different units play
> together.
>
> The IPU has other units missing in this patch:
>
> - CMOS Sensor Interface (csi)
> - Video Deinterlacer (vdi)
> - Sensor Multi FIFO Controler (smfc)
> - Image Converter (ic)
> - Image Rotator (irt)
>
> So expect more files to come in this directory.
I couldn't look into details as the patch is huge, but it looks mostly good.
One thing I don't really like is the

+static struct device *ipu_dev;
+void __iomem *ipu_cm_reg;
+void __iomem *ipu_idmac_reg;

part. I know there is currently no HW supporting more than one of those
controllers, but as a general principle I find this is not a good programming
habit.

Now, on a less technical note: I don't really see how this driver fits in the
MFD category, unless the upcoming units support brings something new. If I
were looking for the i.MX5x image processing unit, I would be looking under
drivers/video/.

Cheers,
Samuel.

--
Intel Open Source Technology Centre
http://oss.intel.com/

2011-02-01 10:59:14

by Sascha Hauer

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

On Tue, Feb 01, 2011 at 11:51:28AM +0100, Samuel Ortiz wrote:
> Hi Sascha,
>
> On Mon, Dec 20, 2010 at 11:48:41AM +0100, Sascha Hauer wrote:
> > The IPU is the Image Processing Unit found on i.MX50/51/53 SoCs. It
> > features several units for image processing, this patch adds support
> > for the units needed for Framebuffer support, namely:
> >
> > - Display Controller (dc)
> > - Display Interface (di)
> > - Display Multi Fifo Controller (dmfc)
> > - Display Processor (dp)
> > - Image DMA Controller (idmac)
> >
> > This patch is based on the Freescale driver, but follows a different
> > approach. The Freescale code implements logical idmac channels and
> > the handling of the subunits is hidden in common idmac code pathes
> > in big switch/case statements. This patch instead just provides code
> > and resource management for the different subunits. The user, in this
> > case the framebuffer driver, decides how the different units play
> > together.
> >
> > The IPU has other units missing in this patch:
> >
> > - CMOS Sensor Interface (csi)
> > - Video Deinterlacer (vdi)
> > - Sensor Multi FIFO Controler (smfc)
> > - Image Converter (ic)
> > - Image Rotator (irt)
> >
> > So expect more files to come in this directory.
> I couldn't look into details as the patch is huge, but it looks mostly good.
> One thing I don't really like is the
>
> +static struct device *ipu_dev;
> +void __iomem *ipu_cm_reg;
> +void __iomem *ipu_idmac_reg;
>
> part. I know there is currently no HW supporting more than one of those
> controllers, but as a general principle I find this is not a good programming
> habit.

Ok, will look into it.

>
> Now, on a less technical note: I don't really see how this driver fits in the
> MFD category, unless the upcoming units support brings something new. If I
> were looking for the i.MX5x image processing unit, I would be looking under
> drivers/video/.

The ipu unit also supports cameras which would go to drivers/media/video.
This is the original reason for putting it into drivers/mfd. That said,
I'm not very comfortable with putting it there, mostly because it
contains a lot of code to which a mfd maintainer can hardly say anything
to and because it's one framework more which has to synchronized when
changes to the IPU come.

Thanks,
Sascha

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

2011-02-01 11:45:04

by Samuel Ortiz

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

On Tue, Feb 01, 2011 at 11:59:09AM +0100, Sascha Hauer wrote:
> On Tue, Feb 01, 2011 at 11:51:28AM +0100, Samuel Ortiz wrote:
> > Hi Sascha,
> >
> > On Mon, Dec 20, 2010 at 11:48:41AM +0100, Sascha Hauer wrote:
> > > The IPU is the Image Processing Unit found on i.MX50/51/53 SoCs. It
> > > features several units for image processing, this patch adds support
> > > for the units needed for Framebuffer support, namely:
> > >
> > > - Display Controller (dc)
> > > - Display Interface (di)
> > > - Display Multi Fifo Controller (dmfc)
> > > - Display Processor (dp)
> > > - Image DMA Controller (idmac)
> > >
> > > This patch is based on the Freescale driver, but follows a different
> > > approach. The Freescale code implements logical idmac channels and
> > > the handling of the subunits is hidden in common idmac code pathes
> > > in big switch/case statements. This patch instead just provides code
> > > and resource management for the different subunits. The user, in this
> > > case the framebuffer driver, decides how the different units play
> > > together.
> > >
> > > The IPU has other units missing in this patch:
> > >
> > > - CMOS Sensor Interface (csi)
> > > - Video Deinterlacer (vdi)
> > > - Sensor Multi FIFO Controler (smfc)
> > > - Image Converter (ic)
> > > - Image Rotator (irt)
> > >
> > > So expect more files to come in this directory.
> > I couldn't look into details as the patch is huge, but it looks mostly good.
> > One thing I don't really like is the
> >
> > +static struct device *ipu_dev;
> > +void __iomem *ipu_cm_reg;
> > +void __iomem *ipu_idmac_reg;
> >
> > part. I know there is currently no HW supporting more than one of those
> > controllers, but as a general principle I find this is not a good programming
> > habit.
>
> Ok, will look into it.
>
> >
> > Now, on a less technical note: I don't really see how this driver fits in the
> > MFD category, unless the upcoming units support brings something new. If I
> > were looking for the i.MX5x image processing unit, I would be looking under
> > drivers/video/.
>
> The ipu unit also supports cameras which would go to drivers/media/video.
> This is the original reason for putting it into drivers/mfd.
Ok, makes a bit more sense.

> That said,
> I'm not very comfortable with putting it there, mostly because it
> contains a lot of code to which a mfd maintainer can hardly say anything
> to
I won't argue with that :)
I'm not really confortable with it neither, even though the code looks nice
and I'm quite sure you're committed to maintaining it in the long term.

> and because it's one framework more which has to synchronized when
> changes to the IPU come.
Ok, so would moving it do drivers/video/ make sense ?

Cheers,
Samuel.

--
Intel Open Source Technology Centre
http://oss.intel.com/

2011-02-01 11:52:03

by Russell King - ARM Linux

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

On Tue, Feb 01, 2011 at 12:44:54PM +0100, Samuel Ortiz wrote:
> Ok, so would moving it do drivers/video/ make sense ?

Isn't that for framebuffer drivers?

2011-02-01 12:04:57

by Arnaud Patard

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

Hi,

Russell King - ARM Linux <[email protected]> writes:

> On Tue, Feb 01, 2011 at 12:44:54PM +0100, Samuel Ortiz wrote:
>> Ok, so would moving it do drivers/video/ make sense ?
>
> Isn't that for framebuffer drivers?

For now, the ipu driver is used for framebuffer on imx5.

Arnaud

2011-02-01 12:51:36

by Sascha Hauer

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

On Tue, Feb 01, 2011 at 01:07:35PM +0100, Arnaud Patard wrote:
> Hi,
>
> Russell King - ARM Linux <[email protected]> writes:
>
> > On Tue, Feb 01, 2011 at 12:44:54PM +0100, Samuel Ortiz wrote:
> >> Ok, so would moving it do drivers/video/ make sense ?
> >
> > Isn't that for framebuffer drivers?
>
> For now, the ipu driver is used for framebuffer on imx5.

But it will hopefully be used for camera aswell.

How about arch/arm/plat-mxc?

Sascha


--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

2011-02-01 14:03:55

by Samuel Ortiz

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

On Tue, Feb 01, 2011 at 11:51:25AM +0000, Russell King - ARM Linux wrote:
> On Tue, Feb 01, 2011 at 12:44:54PM +0100, Samuel Ortiz wrote:
> > Ok, so would moving it do drivers/video/ make sense ?
>
> Isn't that for framebuffer drivers?
Mostly yes, but there are some display controller drivers there as well. See
drivers/video/omap*/.

Cheers,
Samuel.

--
Intel Open Source Technology Centre
http://oss.intel.com/

2011-02-01 16:47:29

by Uwe Kleine-König

[permalink] [raw]
Subject: Re: [PATCH 3/9] Add a mfd IPUv3 driver

Hello,

On Tue, Feb 01, 2011 at 01:51:29PM +0100, Sascha Hauer wrote:
> On Tue, Feb 01, 2011 at 01:07:35PM +0100, Arnaud Patard wrote:
> > Hi,
> >
> > Russell King - ARM Linux <[email protected]> writes:
> >
> > > On Tue, Feb 01, 2011 at 12:44:54PM +0100, Samuel Ortiz wrote:
> > >> Ok, so would moving it do drivers/video/ make sense ?
> > >
> > > Isn't that for framebuffer drivers?
> >
> > For now, the ipu driver is used for framebuffer on imx5.
>
> But it will hopefully be used for camera aswell.
>
> How about arch/arm/plat-mxc?
I'm sure Linus would object.

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |