Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
generates and supplies clocks to all modules within the BMC.
Signed-off-by: Tomer Maimon <[email protected]>
---
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++++++++++++++++++++++
3 files changed, 767 insertions(+)
create mode 100644 drivers/clk/clk-npcm8xx.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 48f8f4221e21..9aa915f6e233 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -428,6 +428,12 @@ config COMMON_CLK_K210
help
Support for the Canaan Kendryte K210 RISC-V SoC clocks.
+config COMMON_CLK_NPCM8XX
+ tristate "Clock driver for the NPCM8XX SoC Family"
+ depends on ARCH_NPCM || COMPILE_TEST
+ help
+ This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family.
+
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d5db170d38d2..b0ec1184a744 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ARCH_MILBEAUT_M10V) += clk-milbeaut.o
obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o
+obj-$(CONFIG_COMMON_CLK_NPCM8XX) += clk-npcm8xx.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
obj-$(CONFIG_COMMON_CLK_OXNAS) += clk-oxnas.o
obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
diff --git a/drivers/clk/clk-npcm8xx.c b/drivers/clk/clk-npcm8xx.c
new file mode 100644
index 000000000000..0b23d638a47a
--- /dev/null
+++ b/drivers/clk/clk-npcm8xx.c
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nuvoton NPCM8xx Clock Generator
+ * All the clocks are initialized by the bootloader, so this driver allow only
+ * reading of current settings directly from the hardware.
+ *
+ * Copyright (C) 2020 Nuvoton Technologies
+ * Author: Tomer Maimon <[email protected]>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/nuvoton,npcm8xx-clock.h>
+
+#define NPCM8XX_REF_CLK 25000000
+
+struct npcm8xx_clk_pll {
+ struct clk_hw hw;
+ void __iomem *pllcon;
+ u8 flags;
+};
+
+#define to_npcm8xx_clk_pll(_hw) container_of(_hw, struct npcm8xx_clk_pll, hw)
+
+#define PLLCON_LOKI BIT(31)
+#define PLLCON_LOKS BIT(30)
+#define PLLCON_FBDV GENMASK(27, 16)
+#define PLLCON_OTDV2 GENMASK(15, 13)
+#define PLLCON_PWDEN BIT(12)
+#define PLLCON_OTDV1 GENMASK(10, 8)
+#define PLLCON_INDV GENMASK(5, 0)
+
+static unsigned long npcm8xx_clk_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct npcm8xx_clk_pll *pll = to_npcm8xx_clk_pll(hw);
+ unsigned long fbdv, indv, otdv1, otdv2;
+ unsigned int val;
+ u64 ret;
+
+ if (parent_rate == 0) {
+ pr_debug("%s: parent rate is zero\n", __func__);
+ return 0;
+ }
+
+ val = readl_relaxed(pll->pllcon);
+
+ indv = FIELD_GET(PLLCON_INDV, val);
+ fbdv = FIELD_GET(PLLCON_FBDV, val);
+ otdv1 = FIELD_GET(PLLCON_OTDV1, val);
+ otdv2 = FIELD_GET(PLLCON_OTDV2, val);
+
+ ret = (u64)parent_rate * fbdv;
+ do_div(ret, indv * otdv1 * otdv2);
+
+ return ret;
+}
+
+static const struct clk_ops npcm8xx_clk_pll_ops = {
+ .recalc_rate = npcm8xx_clk_pll_recalc_rate,
+};
+
+static struct clk_hw *
+npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
+ const char *name, const char *parent_name,
+ unsigned long flags)
+{
+ struct npcm8xx_clk_pll *pll;
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ int ret;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
+
+ init.name = name;
+ init.ops = &npcm8xx_clk_pll_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = flags;
+
+ pll->pllcon = pllcon;
+ pll->hw.init = &init;
+
+ hw = &pll->hw;
+
+ ret = devm_clk_hw_register(dev, hw);
+ if (ret) {
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+
+ return hw;
+}
+
+#define NPCM8XX_CLKEN1 (0x00)
+#define NPCM8XX_CLKEN2 (0x28)
+#define NPCM8XX_CLKEN3 (0x30)
+#define NPCM8XX_CLKEN4 (0x70)
+#define NPCM8XX_CLKSEL (0x04)
+#define NPCM8XX_CLKDIV1 (0x08)
+#define NPCM8XX_CLKDIV2 (0x2C)
+#define NPCM8XX_CLKDIV3 (0x58)
+#define NPCM8XX_CLKDIV4 (0x7C)
+#define NPCM8XX_PLLCON0 (0x0C)
+#define NPCM8XX_PLLCON1 (0x10)
+#define NPCM8XX_PLLCON2 (0x54)
+#define NPCM8XX_SWRSTR (0x14)
+#define NPCM8XX_IRQWAKECON (0x18)
+#define NPCM8XX_IRQWAKEFLAG (0x1C)
+#define NPCM8XX_IPSRST1 (0x20)
+#define NPCM8XX_IPSRST2 (0x24)
+#define NPCM8XX_IPSRST3 (0x34)
+#define NPCM8XX_WD0RCR (0x38)
+#define NPCM8XX_WD1RCR (0x3C)
+#define NPCM8XX_WD2RCR (0x40)
+#define NPCM8XX_SWRSTC1 (0x44)
+#define NPCM8XX_SWRSTC2 (0x48)
+#define NPCM8XX_SWRSTC3 (0x4C)
+#define NPCM8XX_SWRSTC4 (0x50)
+#define NPCM8XX_CORSTC (0x5C)
+#define NPCM8XX_PLLCONG (0x60)
+#define NPCM8XX_AHBCKFI (0x64)
+#define NPCM8XX_SECCNT (0x68)
+#define NPCM8XX_CNTR25M (0x6C)
+#define NPCM8XX_THRTL_CNT (0xC0)
+
+struct npcm8xx_clk_gate_data {
+ u32 reg;
+ u8 bit_idx;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ /*
+ * If this clock is exported via DT, set onecell_idx to constant
+ * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+ * this specific clock. Otherwise, set to -1.
+ */
+ int onecell_idx;
+};
+
+struct npcm8xx_clk_mux_data {
+ u8 shift;
+ u8 mask;
+ u32 *table;
+ const char *name;
+ const char * const *parent_names;
+ u8 num_parents;
+ unsigned long flags;
+ /*
+ * If this clock is exported via DT, set onecell_idx to constant
+ * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+ * this specific clock. Otherwise, set to -1.
+ */
+ int onecell_idx;
+};
+
+struct npcm8xx_clk_div_fixed_data {
+ u8 mult;
+ u8 div;
+ const char *name;
+ const char *parent_name;
+ u8 clk_divider_flags;
+ /*
+ * If this clock is exported via DT, set onecell_idx to constant
+ * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+ * this specific clock. Otherwise, set to -1.
+ */
+ int onecell_idx;
+};
+
+struct npcm8xx_clk_div_data {
+ u32 reg;
+ u8 shift;
+ u8 width;
+ const char *name;
+ const char *parent_name;
+ u8 clk_divider_flags;
+ unsigned long flags;
+ /*
+ * If this clock is exported via DT, set onecell_idx to constant
+ * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+ * this specific clock. Otherwise, set to -1.
+ */
+ int onecell_idx;
+};
+
+struct npcm8xx_clk_pll_data {
+ u32 reg;
+ const char *name;
+ const char *parent_name;
+ unsigned long flags;
+ /*
+ * If this clock is exported via DT, set onecell_idx to constant
+ * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
+ * this specific clock. Otherwise, set to -1.
+ */
+ int onecell_idx;
+};
+
+/*
+ * Single copy of strings used to refer to clocks within this driver indexed by
+ * above enum.
+ */
+#define NPCM8XX_CLK_S_REFCLK "refclk"
+#define NPCM8XX_CLK_S_SYSBYPCK "sysbypck"
+#define NPCM8XX_CLK_S_MCBYPCK "mcbypck"
+#define NPCM8XX_CLK_S_PLL0 "pll0"
+#define NPCM8XX_CLK_S_PLL1 "pll1"
+#define NPCM8XX_CLK_S_PLL1_DIV2 "pll1_div2"
+#define NPCM8XX_CLK_S_PLL2 "pll2"
+#define NPCM8XX_CLK_S_PLL_GFX "pll_gfx"
+#define NPCM8XX_CLK_S_PLL2_DIV2 "pll2_div2"
+#define NPCM8XX_CLK_S_PIX_MUX "gfx_pixel"
+#define NPCM8XX_CLK_S_MC_MUX "mc_phy"
+#define NPCM8XX_CLK_S_CPU_MUX "cpu" /* AKA system clock */
+#define NPCM8XX_CLK_S_MC "mc"
+#define NPCM8XX_CLK_S_AXI "axi" /* AKA CLK2 */
+#define NPCM8XX_CLK_S_AHB "ahb" /* AKA CLK4 */
+#define NPCM8XX_CLK_S_CLKOUT_MUX "clkout_mux"
+#define NPCM8XX_CLK_S_UART_MUX "uart_mux"
+#define NPCM8XX_CLK_S_SD_MUX "sd_mux"
+#define NPCM8XX_CLK_S_GFXM_MUX "gfxm_mux"
+#define NPCM8XX_CLK_S_SU_MUX "serial_usb_mux"
+#define NPCM8XX_CLK_S_DVC_MUX "dvc_mux"
+#define NPCM8XX_CLK_S_GFX_MUX "gfx_mux"
+#define NPCM8XX_CLK_S_ADC_MUX "adc_mux"
+#define NPCM8XX_CLK_S_SPI0 "spi0"
+#define NPCM8XX_CLK_S_SPI1 "spi1"
+#define NPCM8XX_CLK_S_SPI3 "spi3"
+#define NPCM8XX_CLK_S_SPIX "spix"
+#define NPCM8XX_CLK_S_APB1 "apb1"
+#define NPCM8XX_CLK_S_APB2 "apb2"
+#define NPCM8XX_CLK_S_APB3 "apb3"
+#define NPCM8XX_CLK_S_APB4 "apb4"
+#define NPCM8XX_CLK_S_APB5 "apb5"
+#define NPCM8XX_CLK_S_APB19 "apb19"
+#define NPCM8XX_CLK_S_TOCK "tock"
+#define NPCM8XX_CLK_S_CLKOUT "clkout"
+#define NPCM8XX_CLK_S_PRE_ADC "pre adc"
+#define NPCM8XX_CLK_S_UART "uart"
+#define NPCM8XX_CLK_S_UART2 "uart2"
+#define NPCM8XX_CLK_S_TIMER "timer"
+#define NPCM8XX_CLK_S_MMC "mmc"
+#define NPCM8XX_CLK_S_SDHC "sdhc"
+#define NPCM8XX_CLK_S_ADC "adc"
+#define NPCM8XX_CLK_S_GFX "gfx0_gfx1_mem"
+#define NPCM8XX_CLK_S_USBIF "serial_usbif"
+#define NPCM8XX_CLK_S_USB_HOST "usb_host"
+#define NPCM8XX_CLK_S_USB_BRIDGE "usb_bridge"
+#define NPCM8XX_CLK_S_PCI "pci"
+#define NPCM8XX_CLK_S_TH "th"
+#define NPCM8XX_CLK_S_ATB "atb"
+#define NPCM8XX_CLK_S_PRE_CLK "pre_clk"
+
+#define NPCM8XX_CLK_S_RG_MUX "rg_mux"
+#define NPCM8XX_CLK_S_RCP_MUX "rcp_mux"
+#define NPCM8XX_CLK_S_RG "rg"
+#define NPCM8XX_CLK_S_RCP "rcp"
+
+static u32 pll_mux_table[] = {0, 1, 2, 3};
+static const char * const pll_mux_parents[] = {
+ NPCM8XX_CLK_S_PLL0,
+ NPCM8XX_CLK_S_PLL1,
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_PLL2_DIV2,
+};
+
+static u32 cpuck_mux_table[] = {0, 1, 2, 3, 7};
+static const char * const cpuck_mux_parents[] = {
+ NPCM8XX_CLK_S_PLL0,
+ NPCM8XX_CLK_S_PLL1,
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_SYSBYPCK,
+ NPCM8XX_CLK_S_PLL2,
+};
+
+static u32 pixcksel_mux_table[] = {0, 2};
+static const char * const pixcksel_mux_parents[] = {
+ NPCM8XX_CLK_S_PLL_GFX,
+ NPCM8XX_CLK_S_REFCLK,
+};
+
+static u32 sucksel_mux_table[] = {2, 3};
+static const char * const sucksel_mux_parents[] = {
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_PLL2_DIV2,
+};
+
+static u32 mccksel_mux_table[] = {0, 2, 3};
+static const char * const mccksel_mux_parents[] = {
+ NPCM8XX_CLK_S_PLL1_DIV2,
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_MCBYPCK,
+};
+
+static u32 clkoutsel_mux_table[] = {0, 1, 2, 3, 4};
+static const char * const clkoutsel_mux_parents[] = {
+ NPCM8XX_CLK_S_PLL0,
+ NPCM8XX_CLK_S_PLL1,
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_PLL_GFX, // divided by 2
+ NPCM8XX_CLK_S_PLL2_DIV2,
+};
+
+static u32 gfxmsel_mux_table[] = {2, 3};
+static const char * const gfxmsel_mux_parents[] = {
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_PLL2_DIV2,
+};
+
+static u32 dvcssel_mux_table[] = {2, 3};
+static const char * const dvcssel_mux_parents[] = {
+ NPCM8XX_CLK_S_REFCLK,
+ NPCM8XX_CLK_S_PLL2,
+};
+
+static const struct npcm8xx_clk_pll_data npcm8xx_plls[] = {
+ {NPCM8XX_PLLCON0, NPCM8XX_CLK_S_PLL0, NPCM8XX_CLK_S_REFCLK, 0, -1},
+ {NPCM8XX_PLLCON1, NPCM8XX_CLK_S_PLL1, NPCM8XX_CLK_S_REFCLK, 0, -1},
+ {NPCM8XX_PLLCON2, NPCM8XX_CLK_S_PLL2, NPCM8XX_CLK_S_REFCLK, 0, -1},
+ {NPCM8XX_PLLCONG, NPCM8XX_CLK_S_PLL_GFX, NPCM8XX_CLK_S_REFCLK, 0, -1},
+};
+
+static const struct npcm8xx_clk_mux_data npcm8xx_muxes[] = {
+ {0, GENMASK(1, 0), cpuck_mux_table, NPCM8XX_CLK_S_CPU_MUX,
+ cpuck_mux_parents, ARRAY_SIZE(cpuck_mux_parents), CLK_IS_CRITICAL,
+ NPCM8XX_CLK_CPU},
+
+ {4, GENMASK(1, 0), pixcksel_mux_table, NPCM8XX_CLK_S_PIX_MUX,
+ pixcksel_mux_parents, ARRAY_SIZE(pixcksel_mux_parents), 0,
+ NPCM8XX_CLK_GFX_PIXEL},
+
+ {6, GENMASK(1, 0), pll_mux_table, NPCM8XX_CLK_S_SD_MUX,
+ pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1},
+
+ {8, GENMASK(1, 0), pll_mux_table, NPCM8XX_CLK_S_UART_MUX,
+ pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1},
+
+ {10, GENMASK(1, 0), sucksel_mux_table, NPCM8XX_CLK_S_SU_MUX,
+ sucksel_mux_parents, ARRAY_SIZE(sucksel_mux_parents), 0, -1},
+
+ {12, GENMASK(1, 0), mccksel_mux_table, NPCM8XX_CLK_S_MC_MUX,
+ mccksel_mux_parents, ARRAY_SIZE(mccksel_mux_parents), 0, -1},
+
+ {14, GENMASK(1, 0), pll_mux_table, NPCM8XX_CLK_S_ADC_MUX,
+ pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1},
+
+ {16, GENMASK(1, 0), pll_mux_table, NPCM8XX_CLK_S_GFX_MUX,
+ pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1},
+
+ {18, GENMASK(2, 0), clkoutsel_mux_table, NPCM8XX_CLK_S_CLKOUT_MUX,
+ clkoutsel_mux_parents, ARRAY_SIZE(clkoutsel_mux_parents), 0, -1},
+
+ {21, GENMASK(1, 0), gfxmsel_mux_table, NPCM8XX_CLK_S_GFXM_MUX,
+ gfxmsel_mux_parents, ARRAY_SIZE(gfxmsel_mux_parents), 0, -1},
+
+ {23, GENMASK(1, 0), dvcssel_mux_table, NPCM8XX_CLK_S_DVC_MUX,
+ dvcssel_mux_parents, ARRAY_SIZE(dvcssel_mux_parents), 0, -1},
+
+ {25, GENMASK(1, 0), pll_mux_table, NPCM8XX_CLK_S_RG_MUX,
+ pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1},
+
+ {27, GENMASK(1, 0), pll_mux_table, NPCM8XX_CLK_S_RCP_MUX,
+ pll_mux_parents, ARRAY_SIZE(pll_mux_parents), 0, -1},
+};
+
+/* fixed ratio dividers (no register): */
+static const struct npcm8xx_clk_div_fixed_data npcm8xx_divs_fx[] = {
+ { 1, 2, NPCM8XX_CLK_S_MC, NPCM8XX_CLK_S_MC_MUX, 0, NPCM8XX_CLK_MC},
+ { 1, 2, NPCM8XX_CLK_S_AXI, NPCM8XX_CLK_S_TH, 0, NPCM8XX_CLK_AXI},
+ { 1, 2, NPCM8XX_CLK_S_ATB, NPCM8XX_CLK_S_AXI, 0, NPCM8XX_CLK_ATB},
+ { 1, 2, NPCM8XX_CLK_S_PRE_CLK, NPCM8XX_CLK_S_CPU_MUX, 0, -1},
+ { 1, 2, NPCM8XX_CLK_S_PLL1_DIV2, NPCM8XX_CLK_S_PLL1, 0, -1},
+ { 1, 2, NPCM8XX_CLK_S_PLL2_DIV2, NPCM8XX_CLK_S_PLL2, 0, -1},
+};
+
+/* configurable dividers: */
+static const struct npcm8xx_clk_div_data npcm8xx_divs[] = {
+ {NPCM8XX_CLKDIV1, 28, 3, NPCM8XX_CLK_S_ADC, NPCM8XX_CLK_S_PRE_ADC,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+ NPCM8XX_CLK_ADC},
+ /* bit 30-28 ADCCKDIV*/
+ {NPCM8XX_CLKDIV1, 26, 2, NPCM8XX_CLK_S_AHB, NPCM8XX_CLK_S_PRE_CLK,
+ CLK_DIVIDER_READ_ONLY, CLK_IS_CRITICAL, NPCM8XX_CLK_AHB},
+ /* bit 28-26 CLK4DIV*/
+ {NPCM8XX_CLKDIV1, 21, 5, NPCM8XX_CLK_S_PRE_ADC,
+ NPCM8XX_CLK_S_ADC_MUX, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_PRE_ADC},
+ /* bit 25-21 PRE-ADCCKDIV*/
+ {NPCM8XX_CLKDIV1, 16, 5, NPCM8XX_CLK_S_UART,
+ NPCM8XX_CLK_S_UART_MUX, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_UART},
+ /* bit 20-16 UARTDIV*/
+ {NPCM8XX_CLKDIV1, 11, 5, NPCM8XX_CLK_S_MMC,
+ NPCM8XX_CLK_S_SD_MUX, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_MMC},
+ /* bit 15-11 MMCCKDIV*/
+ {NPCM8XX_CLKDIV1, 6, 5, NPCM8XX_CLK_S_SPI3,
+ NPCM8XX_CLK_S_AHB, 0, 0, NPCM8XX_CLK_SPI3},
+ /* bit 10-6 AHB3CKDIV*/
+ {NPCM8XX_CLKDIV1, 2, 4, NPCM8XX_CLK_S_PCI,
+ NPCM8XX_CLK_S_GFX_MUX, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_PCI},
+ /* bit 5-2 PCICKDIV*/
+
+ {NPCM8XX_CLKDIV2, 30, 2, NPCM8XX_CLK_S_APB4, NPCM8XX_CLK_S_AHB,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+ NPCM8XX_CLK_APB4},
+ /* bit 31-30 APB4CKDIV*/
+ {NPCM8XX_CLKDIV2, 28, 2, NPCM8XX_CLK_S_APB3, NPCM8XX_CLK_S_AHB,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+ NPCM8XX_CLK_APB3},
+ /* bit 29-28 APB3CKDIV*/
+ {NPCM8XX_CLKDIV2, 26, 2, NPCM8XX_CLK_S_APB2, NPCM8XX_CLK_S_AHB,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+ NPCM8XX_CLK_APB2},
+ /* bit 28-26 APB2CKDIV*/
+ {NPCM8XX_CLKDIV2, 24, 2, NPCM8XX_CLK_S_APB1, NPCM8XX_CLK_S_AHB,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+ NPCM8XX_CLK_APB1},
+ /* bit 25-24 APB1CKDIV*/
+ {NPCM8XX_CLKDIV2, 22, 2, NPCM8XX_CLK_S_APB5, NPCM8XX_CLK_S_AHB,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0,
+ NPCM8XX_CLK_APB5},
+ /* bit 23-22 APB5CKDIV*/
+ {NPCM8XX_CLKDIV2, 16, 5, NPCM8XX_CLK_S_CLKOUT, NPCM8XX_CLK_S_CLKOUT_MUX,
+ CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_CLKOUT},
+ /* bit 20-16 CLKOUTDIV*/
+ {NPCM8XX_CLKDIV2, 13, 3, NPCM8XX_CLK_S_GFX, NPCM8XX_CLK_S_GFX_MUX,
+ CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_GFX},
+ /* bit 15-13 GFXCKDIV*/
+ {NPCM8XX_CLKDIV2, 8, 5, NPCM8XX_CLK_S_USB_BRIDGE, NPCM8XX_CLK_S_SU_MUX,
+ CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SU},
+ /* bit 12-8 SUCKDIV*/
+ {NPCM8XX_CLKDIV2, 4, 4, NPCM8XX_CLK_S_USB_HOST, NPCM8XX_CLK_S_SU_MUX,
+ CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SU48},
+ /* bit 8-4 SU48CKDIV*/
+ {NPCM8XX_CLKDIV2, 0, 4, NPCM8XX_CLK_S_SDHC,
+ NPCM8XX_CLK_S_SD_MUX, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SDHC}
+ ,/* bit 3-0 SD1CKDIV*/
+
+ {NPCM8XX_CLKDIV3, 16, 8, NPCM8XX_CLK_S_SPI1,
+ NPCM8XX_CLK_S_AHB, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI1},
+ /* bit 23-16 SPI1CKDV*/
+ {NPCM8XX_CLKDIV3, 11, 5, NPCM8XX_CLK_S_UART2,
+ NPCM8XX_CLK_S_UART_MUX, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_UART2},
+ /* bit 15-11 UARTDIV2*/
+ {NPCM8XX_CLKDIV3, 6, 5, NPCM8XX_CLK_S_SPI0,
+ NPCM8XX_CLK_S_AHB, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPI0},
+ /* bit 10-6 SPI0CKDV*/
+ {NPCM8XX_CLKDIV3, 1, 5, NPCM8XX_CLK_S_SPIX,
+ NPCM8XX_CLK_S_AHB, CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_SPIX},
+
+ /* bit 5-1 SPIXCKDV*/
+ {NPCM8XX_CLKDIV4, 28, 4, NPCM8XX_CLK_S_RG, NPCM8XX_CLK_S_RG_MUX,
+ CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_RG},
+ /* bit 31-28 RGREFDIV*/
+ {NPCM8XX_CLKDIV4, 12, 4, NPCM8XX_CLK_S_RCP, NPCM8XX_CLK_S_RCP_MUX,
+ CLK_DIVIDER_READ_ONLY, 0, NPCM8XX_CLK_RCP},
+ /* bit 15-12 RCPREFDIV*/
+ {NPCM8XX_THRTL_CNT, 0, 2, NPCM8XX_CLK_S_TH, NPCM8XX_CLK_S_CPU_MUX,
+ CLK_DIVIDER_READ_ONLY | CLK_DIVIDER_POWER_OF_TWO, 0, NPCM8XX_CLK_TH},
+ /* bit 1-0 TH_DIV*/
+};
+
+static const struct npcm8xx_clk_gate_data npcm8xx_gates[] = {
+ {NPCM8XX_CLKEN1, 31, "smb1-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 30, "smb0-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 29, "smb7-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 28, "smb6-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 27, "adc-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN1, 26, "wdt-gate", NPCM8XX_CLK_S_TIMER, 0},
+ {NPCM8XX_CLKEN1, 25, "usbdev3-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 24, "usbdev6-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 23, "usbdev5-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 22, "usbdev4-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 21, "gmac4-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 20, "timer5_9-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN1, 19, "timer0_4-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN1, 18, "pwmm0-gate", NPCM8XX_CLK_S_APB3, 0},
+ {NPCM8XX_CLKEN1, 17, "huart-gate", NPCM8XX_CLK_S_UART, 0},
+ {NPCM8XX_CLKEN1, 16, "smb5-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 15, "smb4-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 14, "smb3-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 13, "smb2-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN1, 12, "mc-gate", NPCM8XX_CLK_S_MC, 0},
+ {NPCM8XX_CLKEN1, 11, "uart01-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN1, 10, "aes-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 9, "peci-gate", NPCM8XX_CLK_S_APB3, 0},
+ {NPCM8XX_CLKEN1, 8, "usbdev2-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 7, "uart23-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN1, 6, "gmac3-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 5, "usbdev1-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 4, "shm-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 3, "gdma0-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 2, "kcs-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN1, 1, "spi3-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN1, 0, "spi0-gate", NPCM8XX_CLK_S_AHB, 0},
+
+ {NPCM8XX_CLKEN2, 31, "cp-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 30, "tock-gate", NPCM8XX_CLK_S_TOCK, 0},
+ /* bit 29 is reserved */
+ {NPCM8XX_CLKEN2, 28, "gmac1-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 27, "usbif-gate", NPCM8XX_CLK_S_USBIF, 0},
+ {NPCM8XX_CLKEN2, 26, "usbhost1-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 25, "gmac2-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 24, "spi1-gate", NPCM8XX_CLK_S_APB5, 0},
+ {NPCM8XX_CLKEN2, 23, "pspi2-gate", NPCM8XX_CLK_S_APB5, 0},
+ /* bit 22 is reserved */
+ {NPCM8XX_CLKEN2, 21, "3des-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 20, "bt-gate", NPCM8XX_CLK_S_APB3, 0},
+ {NPCM8XX_CLKEN2, 19, "siox2-gate", NPCM8XX_CLK_S_APB3, 0},
+ {NPCM8XX_CLKEN2, 18, "siox1-gate", NPCM8XX_CLK_S_APB3, 0},
+ {NPCM8XX_CLKEN2, 17, "viruart2-gate", NPCM8XX_CLK_S_APB5, 0},
+ {NPCM8XX_CLKEN2, 16, "viruart1-gate", NPCM8XX_CLK_S_APB5, 0},
+ /* bit 15 is reserved */
+ {NPCM8XX_CLKEN2, 14, "vcd-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 13, "ece-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 12, "vdma-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 11, "ahbpcibrg-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 10, "gfxsys-gate", NPCM8XX_CLK_S_APB1, 0},
+ //{NPCM8XX_CLKEN2, 9, "sdhc-gate", NPCM8XX_CLK_S_AHB, 0},
+ /* bit 9 is reserved */
+ {NPCM8XX_CLKEN2, 8, "mmc-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN2, 7, "mft7-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 6, "mft6-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 5, "mft5-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 4, "mft4-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 3, "mft3-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 2, "mft2-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 1, "mft1-gate", NPCM8XX_CLK_S_APB4, 0},
+ {NPCM8XX_CLKEN2, 0, "mft0-gate", NPCM8XX_CLK_S_APB4, 0},
+
+ {NPCM8XX_CLKEN3, 31, "gpiom7-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 30, "gpiom6-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 29, "gpiom5-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 28, "gpiom4-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 27, "gpiom3-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 26, "gpiom2-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 25, "gpiom1-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 24, "gpiom0-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 23, "espi-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 22, "smb11-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 21, "smb10-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 20, "smb9-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 19, "smb8-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 18, "smb15-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 17, "rng-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 16, "timer10_14-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN3, 15, "pcirc-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 14, "sececc-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 13, "sha-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 12, "smb14-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 11, "gdma2-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 10, "gdma1-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 9, "pcimbx-gate", NPCM8XX_CLK_S_AHB, 0},
+ /* bit 8 is reserved */
+ {NPCM8XX_CLKEN3, 7, "usbdev9-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 6, "usbdev8-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 5, "usbdev7-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 4, "usbdev0-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 3, "smb13-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 2, "spix-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN3, 1, "smb12-gate", NPCM8XX_CLK_S_APB2, 0},
+ {NPCM8XX_CLKEN3, 0, "pwmm1-gate", NPCM8XX_CLK_S_APB3, 0},
+
+ {NPCM8XX_CLKEN4, 31, "usbhost2-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN4, 30, "jtm2-gate", NPCM8XX_CLK_S_APB5, 0},
+ {NPCM8XX_CLKEN4, 29, "jtm1-gate", NPCM8XX_CLK_S_APB5, 0},
+ {NPCM8XX_CLKEN4, 28, "pwmm2-gate", NPCM8XX_CLK_S_APB3, 0},
+ /* bit 27 is reserved */
+ /* bit 26 is reserved */
+ /* bit 25 is reserved */
+ {NPCM8XX_CLKEN4, 24, "smb26-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 23, "smb25-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 22, "smb24-gate", NPCM8XX_CLK_S_APB19, 0},
+ /* bit 21 is reserved */
+ /* bit 20 is reserved */
+ {NPCM8XX_CLKEN4, 19, "pcimbx2-gate", NPCM8XX_CLK_S_AHB, 0},
+ {NPCM8XX_CLKEN4, 18, "uart6-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN4, 17, "uart5-gate", NPCM8XX_CLK_S_APB1, 0},
+ {NPCM8XX_CLKEN4, 16, "uart4-gate", NPCM8XX_CLK_S_APB1, 0},
+ /* bit 15 is reserved */
+ /* bit 14 is reserved */
+ {NPCM8XX_CLKEN4, 13, "i3c5-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 12, "i3c4-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 11, "i3c3-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 10, "i3c2-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 9, "i3c1-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 8, "i3c0-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 7, "smb23-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 6, "smb22-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 5, "smb21-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 4, "smb20-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 3, "smb19-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 2, "smb18-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 1, "smb17-gate", NPCM8XX_CLK_S_APB19, 0},
+ {NPCM8XX_CLKEN4, 0, "smb16-gate", NPCM8XX_CLK_S_APB19, 0},
+
+};
+
+static DEFINE_SPINLOCK(npcm8xx_clk_lock);
+
+static int npcm8xx_clk_probe(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *npcm8xx_clk_data;
+ struct device *dev = &pdev->dev;
+ void __iomem *clk_base;
+ struct clk_hw *hw;
+ int i;
+
+ npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
+ NPCM8XX_NUM_CLOCKS),
+ GFP_KERNEL);
+ if (!npcm8xx_clk_data)
+ return -ENOMEM;
+
+ clk_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(clk_base))
+ return PTR_ERR(clk_base);
+
+ npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
+
+ for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
+ npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
+
+ /* Reference 25MHz clock */
+ hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+ npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
+
+ /* Register plls */
+ for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
+ const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
+
+ hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
+ pll_data->name,
+ pll_data->parent_name,
+ pll_data->flags);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register pll\n");
+ return PTR_ERR(hw);
+ }
+
+ if (pll_data->onecell_idx >= 0)
+ npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
+ }
+
+ /* Register fixed dividers */
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
+ NPCM8XX_CLK_S_PLL1, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
+ return PTR_ERR(hw);
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
+ NPCM8XX_CLK_S_PLL2, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
+ return PTR_ERR(hw);
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
+ NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
+ return PTR_ERR(hw);
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
+ NPCM8XX_CLK_S_TH, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
+ return PTR_ERR(hw);
+ }
+
+ hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
+ NPCM8XX_CLK_S_AXI, 0, 1, 2);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
+ return PTR_ERR(hw);
+ }
+
+ /* Register muxes */
+ for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
+ const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
+
+ hw = clk_hw_register_mux_table(dev, mux_data->name,
+ mux_data->parent_names,
+ mux_data->num_parents,
+ mux_data->flags,
+ clk_base + NPCM8XX_CLKSEL,
+ mux_data->shift,
+ mux_data->mask, 0,
+ mux_data->table,
+ &npcm8xx_clk_lock);
+
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register mux\n");
+ return PTR_ERR(hw);
+ }
+
+ if (mux_data->onecell_idx >= 0)
+ npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
+ }
+
+ /* Register clock dividers specified in npcm8xx_divs */
+ for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
+ const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
+
+ hw = clk_hw_register_divider(dev, div_data->name,
+ div_data->parent_name,
+ div_data->flags,
+ clk_base + div_data->reg,
+ div_data->shift, div_data->width,
+ div_data->clk_divider_flags,
+ &npcm8xx_clk_lock);
+ if (IS_ERR(hw)) {
+ dev_err(dev, "npcm8xx_clk: Can't register div table\n");
+ return PTR_ERR(hw);
+ }
+
+ if (div_data->onecell_idx >= 0)
+ npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
+ }
+
+ return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ npcm8xx_clk_data);
+}
+
+static const struct of_device_id npcm8xx_clk_dt_ids[] = {
+ { .compatible = "nuvoton,npcm845-clk", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
+
+static struct platform_driver npcm8xx_clk_driver = {
+ .probe = npcm8xx_clk_probe,
+ .driver = {
+ .name = "npcm8xx_clk",
+ .of_match_table = npcm8xx_clk_dt_ids,
+ },
+};
+
+static int __init npcm8xx_clk_driver_init(void)
+{
+ return platform_driver_register(&npcm8xx_clk_driver);
+}
+arch_initcall(npcm8xx_clk_driver_init);
+
--
2.33.0
Le 19/06/2022 à 17:12, Tomer Maimon a écrit :
> Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
> generates and supplies clocks to all modules within the BMC.
>
> Signed-off-by: Tomer Maimon <[email protected]>
> ---
> drivers/clk/Kconfig | 6 +
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 767 insertions(+)
> create mode 100644 drivers/clk/clk-npcm8xx.c
>
[...]
Hi, below a few comments related to error handling and possible
dev_err_probe() usage to savec a few LoC.
CJ
> +static struct clk_hw *
> +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
> + const char *name, const char *parent_name,
> + unsigned long flags)
> +{
> + struct npcm8xx_clk_pll *pll;
> + struct clk_init_data init;
> + struct clk_hw *hw;
> + int ret;
> +
> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> + if (!pll)
> + return ERR_PTR(-ENOMEM);
> +
> + pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
> +
> + init.name = name;
> + init.ops = &npcm8xx_clk_pll_ops;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = flags;
> +
> + pll->pllcon = pllcon;
> + pll->hw.init = &init;
> +
> + hw = &pll->hw;
> +
> + ret = devm_clk_hw_register(dev, hw);
> + if (ret) {
> + kfree(pll);
Hi,
there is no other kfree(() in this patch. It is handled by the framework
once the clk is registered or should there be another kfree() somewhere
or should pll be devm_alloc()'ed?
> + return ERR_PTR(ret);
> + }
> +
> + return hw;
> +}
> +
[...]
> +static int npcm8xx_clk_probe(struct platform_device *pdev)
> +{
> + struct clk_hw_onecell_data *npcm8xx_clk_data;
> + struct device *dev = &pdev->dev;
> + void __iomem *clk_base;
> + struct clk_hw *hw;
> + int i;
> +
> + npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
> + NPCM8XX_NUM_CLOCKS),
> + GFP_KERNEL);
> + if (!npcm8xx_clk_data)
> + return -ENOMEM;
> +
> + clk_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(clk_base))
> + return PTR_ERR(clk_base);
> +
> + npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
> +
> + for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
> + npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> +
> + /* Reference 25MHz clock */
> + hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);
Other resoruces are managed, but not this one.
Is it on purpose?
Is an error handling path needed or a devm_add_action_or_reset()?
> + if (IS_ERR(hw))
> + return PTR_ERR(hw);
> + npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
> +
> + /* Register plls */
> + for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
> + const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
> +
> + hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
> + pll_data->name,
> + pll_data->parent_name,
> + pll_data->flags);
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register pll\n");
> + return PTR_ERR(hw);
> + }
> +
> + if (pll_data->onecell_idx >= 0)
> + npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
> + }
> +
> + /* Register fixed dividers */
> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
> + NPCM8XX_CLK_S_PLL1, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
> + return PTR_ERR(hw);
return dev_err_probe()?
> + }
> +
> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
> + NPCM8XX_CLK_S_PLL2, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
> + return PTR_ERR(hw);
Same here and in other calls below.
> + }
> +
> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
> + NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
> + return PTR_ERR(hw);
> + }
> +
> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
> + NPCM8XX_CLK_S_TH, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
> + return PTR_ERR(hw);
> + }
> +
> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
> + NPCM8XX_CLK_S_AXI, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
> + return PTR_ERR(hw);
> + }
> +
> + /* Register muxes */
> + for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
> + const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
> +
> + hw = clk_hw_register_mux_table(dev, mux_data->name,
> + mux_data->parent_names,
> + mux_data->num_parents,
> + mux_data->flags,
> + clk_base + NPCM8XX_CLKSEL,
> + mux_data->shift,
> + mux_data->mask, 0,
> + mux_data->table,
> + &npcm8xx_clk_lock);
> +
Same here. Error handling?
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register mux\n");
> + return PTR_ERR(hw);
> + }
> +
> + if (mux_data->onecell_idx >= 0)
> + npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
> + }
> +
> + /* Register clock dividers specified in npcm8xx_divs */
> + for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
> + const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
> +
> + hw = clk_hw_register_divider(dev, div_data->name,
> + div_data->parent_name,
> + div_data->flags,
> + clk_base + div_data->reg,
> + div_data->shift, div_data->width,
> + div_data->clk_divider_flags,
> + &npcm8xx_clk_lock);
devm_clk_hw_register_divider()?
> + if (IS_ERR(hw)) {
> + dev_err(dev, "npcm8xx_clk: Can't register div table\n");
> + return PTR_ERR(hw);
> + }
> +
> + if (div_data->onecell_idx >= 0)
> + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
> + }
> +
> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> + npcm8xx_clk_data);
> +}
> +
> +static const struct of_device_id npcm8xx_clk_dt_ids[] = {
> + { .compatible = "nuvoton,npcm845-clk", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
> +
> +static struct platform_driver npcm8xx_clk_driver = {
> + .probe = npcm8xx_clk_probe,
> + .driver = {
> + .name = "npcm8xx_clk",
> + .of_match_table = npcm8xx_clk_dt_ids,
> + },
> +};
> +
> +static int __init npcm8xx_clk_driver_init(void)
> +{
> + return platform_driver_register(&npcm8xx_clk_driver);
> +}
> +arch_initcall(npcm8xx_clk_driver_init);
> +
Hi Christophe,
Thanks for your comments.
On Sun, 19 Jun 2022 at 20:14, Christophe JAILLET
<[email protected]> wrote:
>
> Le 19/06/2022 à 17:12, Tomer Maimon a écrit :
> > Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
> > generates and supplies clocks to all modules within the BMC.
> >
> > Signed-off-by: Tomer Maimon <[email protected]>
> > ---
> > drivers/clk/Kconfig | 6 +
> > drivers/clk/Makefile | 1 +
> > drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 767 insertions(+)
> > create mode 100644 drivers/clk/clk-npcm8xx.c
> >
>
> [...]
>
> Hi, below a few comments related to error handling and possible
> dev_err_probe() usage to savec a few LoC.
>
> CJ
>
> > +static struct clk_hw *
> > +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
> > + const char *name, const char *parent_name,
> > + unsigned long flags)
> > +{
> > + struct npcm8xx_clk_pll *pll;
> > + struct clk_init_data init;
> > + struct clk_hw *hw;
> > + int ret;
> > +
> > + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> > + if (!pll)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
> > +
> > + init.name = name;
> > + init.ops = &npcm8xx_clk_pll_ops;
> > + init.parent_names = &parent_name;
> > + init.num_parents = 1;
> > + init.flags = flags;
> > +
> > + pll->pllcon = pllcon;
> > + pll->hw.init = &init;
> > +
> > + hw = &pll->hw;
> > +
> > + ret = devm_clk_hw_register(dev, hw);
> > + if (ret) {
> > + kfree(pll);
>
> Hi,
>
> there is no other kfree(() in this patch. It is handled by the framework
> once the clk is registered or should there be another kfree() somewhere
> or should pll be devm_alloc()'ed?
Could use the devm_kzalloc but the hw is sent to the devm function and
not the pll struct.
>
>
> > + return ERR_PTR(ret);
> > + }
> > +
> > + return hw;
> > +}
> > +
>
> [...]
>
> > +static int npcm8xx_clk_probe(struct platform_device *pdev)
> > +{
> > + struct clk_hw_onecell_data *npcm8xx_clk_data;
> > + struct device *dev = &pdev->dev;
> > + void __iomem *clk_base;
> > + struct clk_hw *hw;
> > + int i;
> > +
> > + npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
> > + NPCM8XX_NUM_CLOCKS),
> > + GFP_KERNEL);
> > + if (!npcm8xx_clk_data)
> > + return -ENOMEM;
> > +
> > + clk_base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(clk_base))
> > + return PTR_ERR(clk_base);
> > +
> > + npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
> > +
> > + for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
> > + npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> > +
> > + /* Reference 25MHz clock */
> > + hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);
>
> Other resoruces are managed, but not this one.
> Is it on purpose?
This is the fixed clock - the SoC Reference clock, what do you mean by
not managed?
> Is an error handling path needed or a devm_add_action_or_reset()?
>
> > + if (IS_ERR(hw))
> > + return PTR_ERR(hw);
> > + npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
> > +
> > + /* Register plls */
> > + for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
> > + const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
> > +
> > + hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
> > + pll_data->name,
> > + pll_data->parent_name,
> > + pll_data->flags);
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register pll\n");
> > + return PTR_ERR(hw);
> > + }
> > +
> > + if (pll_data->onecell_idx >= 0)
> > + npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
> > + }
> > +
> > + /* Register fixed dividers */
> > + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
> > + NPCM8XX_CLK_S_PLL1, 0, 1, 2);
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
> > + return PTR_ERR(hw);
>
> return dev_err_probe()?
it will save online but still enter to a bigger function, I am not
sure that the error will be EPROBE_DEFER, and we have returned the
error in the code.
>
> > + }
> > +
> > + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
> > + NPCM8XX_CLK_S_PLL2, 0, 1, 2);
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
> > + return PTR_ERR(hw);
>
> Same here and in other calls below.
>
> > + }
> > +
> > + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
> > + NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
> > + return PTR_ERR(hw);
> > + }
> > +
> > + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
> > + NPCM8XX_CLK_S_TH, 0, 1, 2);
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
> > + return PTR_ERR(hw);
> > + }
> > +
> > + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
> > + NPCM8XX_CLK_S_AXI, 0, 1, 2);
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
> > + return PTR_ERR(hw);
> > + }
> > +
> > + /* Register muxes */
> > + for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
> > + const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
> > +
> > + hw = clk_hw_register_mux_table(dev, mux_data->name,
> > + mux_data->parent_names,
> > + mux_data->num_parents,
> > + mux_data->flags,
> > + clk_base + NPCM8XX_CLKSEL,
> > + mux_data->shift,
> > + mux_data->mask, 0,
> > + mux_data->table,
> > + &npcm8xx_clk_lock);
> > +
> Same here. Error handling?
what do you mean?
>
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register mux\n");
> > + return PTR_ERR(hw);
> > + }
> > +
> > + if (mux_data->onecell_idx >= 0)
> > + npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
> > + }
> > +
> > + /* Register clock dividers specified in npcm8xx_divs */
> > + for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
> > + const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
> > +
> > + hw = clk_hw_register_divider(dev, div_data->name,
> > + div_data->parent_name,
> > + div_data->flags,
> > + clk_base + div_data->reg,
> > + div_data->shift, div_data->width,
> > + div_data->clk_divider_flags,
> > + &npcm8xx_clk_lock);
>
> devm_clk_hw_register_divider()?
Will do.
>
> > + if (IS_ERR(hw)) {
> > + dev_err(dev, "npcm8xx_clk: Can't register div table\n");
> > + return PTR_ERR(hw);
> > + }
> > +
> > + if (div_data->onecell_idx >= 0)
> > + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
> > + }
> > +
> > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> > + npcm8xx_clk_data);
> > +}
> > +
> > +static const struct of_device_id npcm8xx_clk_dt_ids[] = {
> > + { .compatible = "nuvoton,npcm845-clk", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
> > +
> > +static struct platform_driver npcm8xx_clk_driver = {
> > + .probe = npcm8xx_clk_probe,
> > + .driver = {
> > + .name = "npcm8xx_clk",
> > + .of_match_table = npcm8xx_clk_dt_ids,
> > + },
> > +};
> > +
> > +static int __init npcm8xx_clk_driver_init(void)
> > +{
> > + return platform_driver_register(&npcm8xx_clk_driver);
> > +}
> > +arch_initcall(npcm8xx_clk_driver_init);
> > +
>
Best regards,
Tomer
Le 20/06/2022 à 14:48, Tomer Maimon a écrit :
> Hi Christophe,
>
> Thanks for your comments.
>
> On Sun, 19 Jun 2022 at 20:14, Christophe JAILLET
> <[email protected]> wrote:
>>
>> Le 19/06/2022 à 17:12, Tomer Maimon a écrit :
>>> Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
>>> generates and supplies clocks to all modules within the BMC.
>>>
>>> Signed-off-by: Tomer Maimon <tmaimon77-Re5JQEeQqe8AvxtiuMwx3w-XMD5yJDbdMQAvxtiuMwx3w@public.gmane.organe.org>
>>> ---
>>> drivers/clk/Kconfig | 6 +
>>> drivers/clk/Makefile | 1 +
>>> drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 767 insertions(+)
>>> create mode 100644 drivers/clk/clk-npcm8xx.c
>>>
>>
>> [...]
>>
>> Hi, below a few comments related to error handling and possible
>> dev_err_probe() usage to savec a few LoC.
>>
>> CJ
>>
>>> +static struct clk_hw *
>>> +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
>>> + const char *name, const char *parent_name,
>>> + unsigned long flags)
>>> +{
>>> + struct npcm8xx_clk_pll *pll;
>>> + struct clk_init_data init;
>>> + struct clk_hw *hw;
>>> + int ret;
>>> +
>>> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
>>> + if (!pll)
>>> + return ERR_PTR(-ENOMEM);
>>> +
>>> + pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
>>> +
>>> + init.name = name;
>>> + init.ops = &npcm8xx_clk_pll_ops;
>>> + init.parent_names = &parent_name;
>>> + init.num_parents = 1;
>>> + init.flags = flags;
>>> +
>>> + pll->pllcon = pllcon;
>>> + pll->hw.init = &init;
>>> +
>>> + hw = &pll->hw;
>>> +
>>> + ret = devm_clk_hw_register(dev, hw);
>>> + if (ret) {
>>> + kfree(pll);
>>
>> Hi,
>>
>> there is no other kfree(() in this patch. It is handled by the framework
>> once the clk is registered or should there be another kfree() somewhere
>> or should pll be devm_alloc()'ed?
> Could use the devm_kzalloc but the hw is sent to the devm function and
> not the pll struct.
My point, as explained below is that some resources are managed (i.e.
allocated by a devm_ function and released by the framework if the probe
fails or if the driver is removed), but not all.
I think that it is not consistent and that maybe the release of the
corresponding resources should be handled in a way or another.
>>
>>
>>> + return ERR_PTR(ret);
>>> + }
>>> +
>>> + return hw;
>>> +}
>>> +
>>
>> [...]
>>
>>> +static int npcm8xx_clk_probe(struct platform_device *pdev)
>>> +{
>>> + struct clk_hw_onecell_data *npcm8xx_clk_data;
>>> + struct device *dev = &pdev->dev;
>>> + void __iomem *clk_base;
>>> + struct clk_hw *hw;
>>> + int i;
>>> +
>>> + npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
>>> + NPCM8XX_NUM_CLOCKS),
>>> + GFP_KERNEL);
>>> + if (!npcm8xx_clk_data)
>>> + return -ENOMEM;
>>> +
>>> + clk_base = devm_platform_ioremap_resource(pdev, 0);
>>> + if (IS_ERR(clk_base))
>>> + return PTR_ERR(clk_base);
>>> +
>>> + npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
>>> +
>>> + for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
>>> + npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
>>> +
>>> + /* Reference 25MHz clock */
>>> + hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);
>>
>> Other resoruces are managed, but not this one.
>> Is it on purpose?
> This is the fixed clock - the SoC Reference clock, what do you mean by
> not managed?
clk_hw_register_fixed_rate() allocates some memory. If an error occures
later on or if the driver is .remove()'ed, this memory will leak.
(unless I missed something).
Most of your other function calls use some devm_ variant, so the
corresponding resources are released automatically in case of error or
if the driver is unloaed.
>> Is an error handling path needed or a devm_add_action_or_reset()?
>>
>>> + if (IS_ERR(hw))
>>> + return PTR_ERR(hw);
>>> + npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
>>> +
>>> + /* Register plls */
>>> + for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
>>> + const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
>>> +
>>> + hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
>>> + pll_data->name,
>>> + pll_data->parent_name,
>>> + pll_data->flags);
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register pll\n");
>>> + return PTR_ERR(hw);
>>> + }
>>> +
>>> + if (pll_data->onecell_idx >= 0)
>>> + npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
>>> + }
>>> +
>>> + /* Register fixed dividers */
>>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
>>> + NPCM8XX_CLK_S_PLL1, 0, 1, 2);
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
>>> + return PTR_ERR(hw);
>>
>> return dev_err_probe()?
> it will save online but still enter to a bigger function, I am not
> sure that the error will be EPROBE_DEFER, and we have returned the
> error in the code.
It is mostly a matter of taste, so if you don't think my proposal
improves anything, just forget about it.
>>
>>> + }
>>> +
>>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
>>> + NPCM8XX_CLK_S_PLL2, 0, 1, 2);
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
>>> + return PTR_ERR(hw);
>>
>> Same here and in other calls below.
>>
>>> + }
>>> +
>>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
>>> + NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
>>> + return PTR_ERR(hw);
>>> + }
>>> +
>>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
>>> + NPCM8XX_CLK_S_TH, 0, 1, 2);
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
>>> + return PTR_ERR(hw);
>>> + }
>>> +
>>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
>>> + NPCM8XX_CLK_S_AXI, 0, 1, 2);
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
>>> + return PTR_ERR(hw);
>>> + }
>>> +
>>> + /* Register muxes */
>>> + for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
>>> + const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
>>> +
>>> + hw = clk_hw_register_mux_table(dev, mux_data->name,
>>> + mux_data->parent_names,
>>> + mux_data->num_parents,
>>> + mux_data->flags,
>>> + clk_base + NPCM8XX_CLKSEL,
>>> + mux_data->shift,
>>> + mux_data->mask, 0,
>>> + mux_data->table,
>>> + &npcm8xx_clk_lock);
>>> +
>> Same here. Error handling?
> what do you mean?
I mean the same as above. clk_hw_register_mux_table() allocates some
memory. If an error occures later on or if the driver is .remove()'ed,
this memory will leak. (unless I missed something).
Error handling was not a really good wording. You should read "should
the resources allocated by this function be released if an error occures
below"
>>
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register mux\n");
>>> + return PTR_ERR(hw);
>>> + }
>>> +
>>> + if (mux_data->onecell_idx >= 0)
>>> + npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
>>> + }
>>> +
>>> + /* Register clock dividers specified in npcm8xx_divs */
>>> + for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
>>> + const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
>>> +
>>> + hw = clk_hw_register_divider(dev, div_data->name,
>>> + div_data->parent_name,
>>> + div_data->flags,
>>> + clk_base + div_data->reg,
>>> + div_data->shift, div_data->width,
>>> + div_data->clk_divider_flags,
>>> + &npcm8xx_clk_lock);
>>
>> devm_clk_hw_register_divider()?
> Will do.
Here, the devm_ alternative exist. But my point is the same as above.
(release of resources in cae of error or if the driver is removed)
>>
>>> + if (IS_ERR(hw)) {
>>> + dev_err(dev, "npcm8xx_clk: Can't register div table\n");
>>> + return PTR_ERR(hw);
>>> + }
>>> +
>>> + if (div_data->onecell_idx >= 0)
>>> + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
>>> + }
>>> +
>>> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
>>> + npcm8xx_clk_data);
>>> +}
>>> +
>>> +static const struct of_device_id npcm8xx_clk_dt_ids[] = {
>>> + { .compatible = "nuvoton,npcm845-clk", },
>>> + { }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
>>> +
>>> +static struct platform_driver npcm8xx_clk_driver = {
>>> + .probe = npcm8xx_clk_probe,
>>> + .driver = {
>>> + .name = "npcm8xx_clk",
>>> + .of_match_table = npcm8xx_clk_dt_ids,
>>> + },
>>> +};
>>> +
>>> +static int __init npcm8xx_clk_driver_init(void)
>>> +{
>>> + return platform_driver_register(&npcm8xx_clk_driver);
>>> +}
>>> +arch_initcall(npcm8xx_clk_driver_init);
>>> +
>>
>
> Best regards,
>
> Tomer
>
Hi Christophe,
On Mon, 20 Jun 2022 at 20:59, Christophe JAILLET
<[email protected]> wrote:
>
> Le 20/06/2022 à 14:48, Tomer Maimon a écrit :
> > Hi Christophe,
> >
> > Thanks for your comments.
> >
> > On Sun, 19 Jun 2022 at 20:14, Christophe JAILLET
> > <[email protected]> wrote:
> >>
> >> Le 19/06/2022 à 17:12, Tomer Maimon a écrit :
> >>> Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which
> >>> generates and supplies clocks to all modules within the BMC.
> >>>
> >>> Signed-off-by: Tomer Maimon <tmaimon77-Re5JQEeQqe8AvxtiuMwx3w-XMD5yJDbdMQAvxtiuMwx3w@public.gmane.organe.org>
> >>> ---
> >>> drivers/clk/Kconfig | 6 +
> >>> drivers/clk/Makefile | 1 +
> >>> drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++++++++++++++++++++++
> >>> 3 files changed, 767 insertions(+)
> >>> create mode 100644 drivers/clk/clk-npcm8xx.c
> >>>
> >>
> >> [...]
> >>
> >> Hi, below a few comments related to error handling and possible
> >> dev_err_probe() usage to savec a few LoC.
> >>
> >> CJ
> >>
> >>> +static struct clk_hw *
> >>> +npcm8xx_clk_register_pll(struct device *dev, void __iomem *pllcon,
> >>> + const char *name, const char *parent_name,
> >>> + unsigned long flags)
> >>> +{
> >>> + struct npcm8xx_clk_pll *pll;
> >>> + struct clk_init_data init;
> >>> + struct clk_hw *hw;
> >>> + int ret;
> >>> +
> >>> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> >>> + if (!pll)
> >>> + return ERR_PTR(-ENOMEM);
> >>> +
> >>> + pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
> >>> +
> >>> + init.name = name;
> >>> + init.ops = &npcm8xx_clk_pll_ops;
> >>> + init.parent_names = &parent_name;
> >>> + init.num_parents = 1;
> >>> + init.flags = flags;
> >>> +
> >>> + pll->pllcon = pllcon;
> >>> + pll->hw.init = &init;
> >>> +
> >>> + hw = &pll->hw;
> >>> +
> >>> + ret = devm_clk_hw_register(dev, hw);
> >>> + if (ret) {
> >>> + kfree(pll);
> >>
> >> Hi,
> >>
> >> there is no other kfree(() in this patch. It is handled by the framework
> >> once the clk is registered or should there be another kfree() somewhere
> >> or should pll be devm_alloc()'ed?
> > Could use the devm_kzalloc but the hw is sent to the devm function and
> > not the pll struct.
>
> My point, as explained below is that some resources are managed (i.e.
> allocated by a devm_ function and released by the framework if the probe
> fails or if the driver is removed), but not all.
>
> I think that it is not consistent and that maybe the release of the
> corresponding resources should be handled in a way or another.
Thanks for your clarification will Address in V4
>
> >>
> >>
> >>> + return ERR_PTR(ret);
> >>> + }
> >>> +
> >>> + return hw;
> >>> +}
> >>> +
> >>
> >> [...]
> >>
> >>> +static int npcm8xx_clk_probe(struct platform_device *pdev)
> >>> +{
> >>> + struct clk_hw_onecell_data *npcm8xx_clk_data;
> >>> + struct device *dev = &pdev->dev;
> >>> + void __iomem *clk_base;
> >>> + struct clk_hw *hw;
> >>> + int i;
> >>> +
> >>> + npcm8xx_clk_data = devm_kzalloc(dev, struct_size(npcm8xx_clk_data, hws,
> >>> + NPCM8XX_NUM_CLOCKS),
> >>> + GFP_KERNEL);
> >>> + if (!npcm8xx_clk_data)
> >>> + return -ENOMEM;
> >>> +
> >>> + clk_base = devm_platform_ioremap_resource(pdev, 0);
> >>> + if (IS_ERR(clk_base))
> >>> + return PTR_ERR(clk_base);
> >>> +
> >>> + npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
> >>> +
> >>> + for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
> >>> + npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> >>> +
> >>> + /* Reference 25MHz clock */
> >>> + hw = clk_hw_register_fixed_rate(dev, "refclk", NULL, 0, NPCM8XX_REF_CLK);
> >>
> >> Other resoruces are managed, but not this one.
> >> Is it on purpose?
> > This is the fixed clock - the SoC Reference clock, what do you mean by
> > not managed?
>
> clk_hw_register_fixed_rate() allocates some memory. If an error occures
> later on or if the driver is .remove()'ed, this memory will leak.
> (unless I missed something).
>
> Most of your other function calls use some devm_ variant, so the
> corresponding resources are released automatically in case of error or
> if the driver is unloaed.
Thanks for your clarification will Address in V4
>
> >> Is an error handling path needed or a devm_add_action_or_reset()?
> >>
> >>> + if (IS_ERR(hw))
> >>> + return PTR_ERR(hw);
> >>> + npcm8xx_clk_data->hws[NPCM8XX_CLK_REFCLK] = hw;
> >>> +
> >>> + /* Register plls */
> >>> + for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
> >>> + const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
> >>> +
> >>> + hw = npcm8xx_clk_register_pll(dev, clk_base + pll_data->reg,
> >>> + pll_data->name,
> >>> + pll_data->parent_name,
> >>> + pll_data->flags);
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register pll\n");
> >>> + return PTR_ERR(hw);
> >>> + }
> >>> +
> >>> + if (pll_data->onecell_idx >= 0)
> >>> + npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
> >>> + }
> >>> +
> >>> + /* Register fixed dividers */
> >>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL1_DIV2,
> >>> + NPCM8XX_CLK_S_PLL1, 0, 1, 2);
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register fixed div\n");
> >>> + return PTR_ERR(hw);
> >>
> >> return dev_err_probe()?
> > it will save online but still enter to a bigger function, I am not
> > sure that the error will be EPROBE_DEFER, and we have returned the
> > error in the code.
>
> It is mostly a matter of taste, so if you don't think my proposal
> improves anything, just forget about it.
>
> >>
> >>> + }
> >>> +
> >>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PLL2_DIV2,
> >>> + NPCM8XX_CLK_S_PLL2, 0, 1, 2);
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register pll div2\n");
> >>> + return PTR_ERR(hw);
> >>
> >> Same here and in other calls below.
> >>
> >>> + }
> >>> +
> >>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_PRE_CLK,
> >>> + NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register ckclk div2\n");
> >>> + return PTR_ERR(hw);
> >>> + }
> >>> +
> >>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_AXI,
> >>> + NPCM8XX_CLK_S_TH, 0, 1, 2);
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register axi div2\n");
> >>> + return PTR_ERR(hw);
> >>> + }
> >>> +
> >>> + hw = devm_clk_hw_register_fixed_factor(dev, NPCM8XX_CLK_S_ATB,
> >>> + NPCM8XX_CLK_S_AXI, 0, 1, 2);
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register atb div2\n");
> >>> + return PTR_ERR(hw);
> >>> + }
> >>> +
> >>> + /* Register muxes */
> >>> + for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
> >>> + const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
> >>> +
> >>> + hw = clk_hw_register_mux_table(dev, mux_data->name,
> >>> + mux_data->parent_names,
> >>> + mux_data->num_parents,
> >>> + mux_data->flags,
> >>> + clk_base + NPCM8XX_CLKSEL,
> >>> + mux_data->shift,
> >>> + mux_data->mask, 0,
> >>> + mux_data->table,
> >>> + &npcm8xx_clk_lock);
> >>> +
> >> Same here. Error handling?
> > what do you mean?
>
> I mean the same as above. clk_hw_register_mux_table() allocates some
> memory. If an error occures later on or if the driver is .remove()'ed,
> this memory will leak. (unless I missed something).
>
> Error handling was not a really good wording. You should read "should
> the resources allocated by this function be released if an error occures
> below"
Thanks for your clarification will Address in V4
>
> >>
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register mux\n");
> >>> + return PTR_ERR(hw);
> >>> + }
> >>> +
> >>> + if (mux_data->onecell_idx >= 0)
> >>> + npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
> >>> + }
> >>> +
> >>> + /* Register clock dividers specified in npcm8xx_divs */
> >>> + for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
> >>> + const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
> >>> +
> >>> + hw = clk_hw_register_divider(dev, div_data->name,
> >>> + div_data->parent_name,
> >>> + div_data->flags,
> >>> + clk_base + div_data->reg,
> >>> + div_data->shift, div_data->width,
> >>> + div_data->clk_divider_flags,
> >>> + &npcm8xx_clk_lock);
> >>
> >> devm_clk_hw_register_divider()?
> > Will do.
>
> Here, the devm_ alternative exist. But my point is the same as above.
> (release of resources in cae of error or if the driver is removed)
>
> >>
> >>> + if (IS_ERR(hw)) {
> >>> + dev_err(dev, "npcm8xx_clk: Can't register div table\n");
> >>> + return PTR_ERR(hw);
> >>> + }
> >>> +
> >>> + if (div_data->onecell_idx >= 0)
> >>> + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
> >>> + }
> >>> +
> >>> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> >>> + npcm8xx_clk_data);
> >>> +}
> >>> +
> >>> +static const struct of_device_id npcm8xx_clk_dt_ids[] = {
> >>> + { .compatible = "nuvoton,npcm845-clk", },
> >>> + { }
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, npcm8xx_clk_dt_ids);
> >>> +
> >>> +static struct platform_driver npcm8xx_clk_driver = {
> >>> + .probe = npcm8xx_clk_probe,
> >>> + .driver = {
> >>> + .name = "npcm8xx_clk",
> >>> + .of_match_table = npcm8xx_clk_dt_ids,
> >>> + },
> >>> +};
> >>> +
> >>> +static int __init npcm8xx_clk_driver_init(void)
> >>> +{
> >>> + return platform_driver_register(&npcm8xx_clk_driver);
> >>> +}
> >>> +arch_initcall(npcm8xx_clk_driver_init);
> >>> +
> >>
> >
> > Best regards,
> >
> > Tomer
> >
>
Best regards,
Tomer