This is a massive rework and a respin of Kristen Accardi's marvellous
FG-KASLR series (v5).
The major differences since v5 [0]:
* You can now tune the number of functions per each section to
achieve the preferable vmlinux size or protection level. Default
is still as one section per function.
This can be handy for storage-constrained systems. 4-8 fps are
still strong, but reduce the size of the final vmlinu{x,z}
significantly (see the comparison below);
* I don't use orphan sections anymore. It's not reliable at all /
may differ from linker to linker, and also conflicts with
CONFIG_LD_ORPHAN_WARN which is great for catching random bugs ->
* All the .text.* sections are now being described explicitly in the
linker script. A Perl script is used to take the original LDS, the
original object file, read a list of input sections from it and
generate the resulting LDS.
This costs a bit of linking time as LD tends to think hard when
processing scripts > 1 Mb (a subject for future BFD and LLD
patches). It adds about 60-80 seconds to the whole linking process
(BTF step, 2-3 kallsyms steps and the final step), but "better
safe than sorry".
In addition, that approach allows to reserve some space at the end
of text (8-12 Kb, no impact on vmlinux size as THP-aligned (2 Mb)
rodata goes right after it) and add some link-time assertions ->
* Input .text section now must be empty, otherwise the linkage will
be stopped. This is implemented by the size assertion in the
resulting LD script and is designed to plug the potentional layout
leakage. This also means that ->
* "Regular" ASM functions are now being placed into unique separate
functions the same way compiler does this for C functions. This is
achieved by hijacking the commonly used macros. The symbol name is
now being taken as a base for its new section name.
This gives a better opportunity to LTO, DCE and FG-KASLR, as ASM
code can now also be randomized or garbage-collected;
* It's now fully compatible with ClangLTO, ClangCFI,
CONFIG_LD_ORPHAN_WARN and some all the rest stuff landed since the
last revision has been published;
* `-z unique-symbol` linker flag is now used to ensure livepatching
works even with randomized sections. Position-based search is not
needed in this case;
* Kallsyms are now being shuffled and displayed in random order not
only when FG-KASLR is enabled, but all the time (for unpriviledged
access);
* Tons of code were improved and deduplicated all over the place.
The series has been compile-time and runtime tested on the following
setups with no issues:
- x86_64, GCC 11, Binutils 2.35;
- x86_64, Clang/LLVM 13, ClangLTO + ClangCFI (from Sami's tree).
Some numbers for comparison:
* make -j65 -- time of the full kernel compilation with the named
option enabled (and -j$(($(nproc) + 1))), give to see mainly how
linkers choke on big LD scripts;
* boot -- time elapsed from starting the kernel by the bootloader
to login prompt, affected mostly by the main FG-KASLR preboot
loop which shuffles function sections;
* vmlinux.o -- the size of the final vmlinux.o, altered by relocs
and -ffunction-sections;
* vmlinux -- the size of the final vmlinux, depends directly on the
number of (function) sections;
* bzImage -- the size of the final compressed kernel, same as with
vmlinux;
* bogoops/s -- stress-ng -c$(nproc) results on the kernel with the
named feature enabled;
* fps -- the number of functions per section, controlled by
CONFIG_FG_KASLR_SHIFT and CONFIG_MODULE_FG_KASLR_SHIFT.
16 fps means shift = 4, 8 fps on shift = 2, 1 fps for shift = 0.
feat make -j65 boot vmlinux.o vmlinux bzImage bogoops/s
Relocatable 4m38.478s 24.440s 72014208 58579520 9396192 57640.39
KASLR 4m39.344s 24.204s 72020624 87805776 9740352 57393.80
FG-K 16 fps 6m16.493s 25.429s 83759856 87194160 10885632 57784.76
FG-K 8 fps 6m20.190s 25.094s 83759856 88741328 10985248 56625.84
FG-K 1 fps 7m09.611s 25.922s 83759856 95681128 11352192 56953.99
From v8 ([1]):
- the list of vmlinux symbols needed by both objcopy and fgkaslr.c
is now being expanded automatically from a header file. For
objcopy plain text, a direct cpp call is used, in C file I define
a generator macro and then include the header (Peter);
- unify compare and adjust functions between ORC and non-ORC
symbols (Peter);
- place ORC sorting function in a separate file
(arch/x86/lib/orc.c) to be able to just include it and not repeat
the same code for the second time in the pre-boot environment
(Peter);
- turn ASM functions sections on by default, not by new macros.
This involves `--sectname-subst` GAS flag and a fistful of ASM
code tweaks (Peter, Nicolas Pitre);
- make the feature above optional for FG-KASLR, not a required one.
For sure, unrandomized blob of ASM .text is a hole, but better
than nothing. ASM function sections is here for x86 anyways;
- deduplicate lots of code apart from ORC sorting and vmlinux
symbols. Introduce a new common macro for shuffling an array
and use it all the way through (Peter);
- use `-z unique-symbol` linker flag to make position-based search
in livepatching code obsolete. This is now preferred and enabled
when available, and is a requirement for FG-KASLR where pos-based
search is impossible (Peter, Josh, HJL);
- always print kallsyms in random order for unpriviledged users,
not only when FG-KASLR is enabled. This allowed to simplify code,
and you can consider it as yet another hardening (Ard, Josh,
Peter);
- change ".lds" ext for module linker scripts to ".ko.lds" as ".lds"
can't be treated purely as of generated / build artifacts. There's
a bunch of LDSes inside the tree, and they all are valid. Since
it's not that easy to distinguish where is what on `make clean`
and stuff like ".mod.c" is being deleted using a call to `find`,
just pick ".ko.lds".
It makes it even more clear that this script is for the final
module, not any intermediate files.
From v7 (unreleased):
- rebase on top of 5.16-rc3, notably:
- drop 4 patches already taken in mainline;
- adopt to the new exception handlers logics;
- changed two new x86 ASM crypto module to generate function
sections. Also:
- improve generate_text_sections.pl script to address changes in
Clang 13 emitting __cfi_check_fail() only on final linking;
- retest on the latest stable Clang/LLVM stack (13);
- add missing .lds rule to the top .gitignore.
From v6 ([2]):
- rebase on top of 5.15-rc1 and
db2b0c5d7b6f ("objtool: Support pv_opsindirect calls for noinstr")
from tip's objtool/core as there is plenty of counter-intuitive
conflicts between these two;
- change livepatch bit (#12) logics from forced overrride to exit
with errno and a error message to make it more clear to the users
(Miroslav);
- expand the cover letter a bit, add some build-time and runtime
numbers (Kees, Kristen).
The series is also available here: [3]
[0] https://lore.kernel.org/kernel-hardening/[email protected]
[1] https://lore.kernel.org/kernel-hardening/[email protected]
[2] https://lore.kernel.org/kernel-hardening/[email protected]
[3] https://github.com/alobakin/linux/pull/3
The original v5 cover letter:
Function Granular Kernel Address Space Layout Randomization (fgkaslr)
---------------------------------------------------------------------
This patch set is an implementation of finer grained kernel address space
randomization. It rearranges your kernel code at load time
on a per-function level granularity, with only around a second added to
boot time.
Changes in v5:
--------------
* fixed a bug in the code which increases boot heap size for
CONFIG_FG_KASLR which prevented the boot heap from being increased
for CONFIG_FG_KASLR when using bzip2 compression. Thanks to Andy Lavr
for finding the problem and identifying the solution.
* changed the adjustment of the orc_unwind_ip table at boot time to
disregard relocs associated with this table, and instead inspect the
entries separately. Relocs are not able to be used since they are
no longer correct once the table is resorted at buildtime.
* changed how orc_unwind_ip addresses in randomized sections are identified
to include the byte immediately after the end of the section.
* updated module code to use kvmalloc/kvfree based on suggestions from
Evgenii Shatokhin <[email protected]>.
* changed kernel commandline to disable fgkaslr to simply "nofgkaslr" to
match the nokaslr option. fgkaslr="X" can be added at a later date
if it is needed.
* Added a patch to force livepatch to require symbols to be unique if
using while fgkaslr either for core or modules.
Changes in v4:
-------------
* dropped the patch to split out change to STATIC definition in
x86/boot/compressed/misc.c and replaced with a patch authored
by Kees Cook to avoid the duplicate malloc definitions
* Added a section to Documentation/admin-guide/kernel-parameters.txt
to document the fgkaslr boot option.
* redesigned the patch to hide the new layout when reading
/proc/kallsyms. The previous implementation utilized a dynamically
allocated linked list to display the kernel and module symbols
in alphabetical order. The new implementation uses a randomly
shuffled index array to display the kernel and module symbols
in a random order.
Changes in v3:
-------------
* Makefile changes to accommodate CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
* removal of extraneous ALIGN_PAGE from _etext changes
* changed variable names in x86/tools/relocs to be less confusing
* split out change to STATIC definition in x86/boot/compressed/misc.c
* Updates to Documentation to make it more clear what is preserved in .text
* much more detailed commit message for function granular KASLR patch
* minor tweaks and changes that make for more readable code
* this cover letter updated slightly to add additional details
Changes in v2:
--------------
* Fix to address i386 build failure
* Allow module reordering patch to be configured separately so that
arm (or other non-x86_64 arches) can take advantage of module function
reordering. This support has not be tested by me, but smoke tested by
Ard Biesheuvel <[email protected]> on arm.
* Fix build issue when building on arm as reported by
Ard Biesheuvel <[email protected]>
Patches to objtool are included because they are dependencies for this
patchset, however they have been submitted by their maintainer separately.
Background
----------
KASLR was merged into the kernel with the objective of increasing the
difficulty of code reuse attacks. Code reuse attacks reused existing code
snippets to get around existing memory protections. They exploit software bugs
which expose addresses of useful code snippets to control the flow of
execution for their own nefarious purposes. KASLR moves the entire kernel
code text as a unit at boot time in order to make addresses less predictable.
The order of the code within the segment is unchanged - only the base address
is shifted. There are a few shortcomings to this algorithm.
1. Low Entropy - there are only so many locations the kernel can fit in. This
means an attacker could guess without too much trouble.
2. Knowledge of a single address can reveal the offset of the base address,
exposing all other locations for a published/known kernel image.
3. Info leaks abound.
Finer grained ASLR has been proposed as a way to make ASLR more resistant
to info leaks. It is not a new concept at all, and there are many variations
possible. Function reordering is an implementation of finer grained ASLR
which randomizes the layout of an address space on a function level
granularity. We use the term "fgkaslr" in this document to refer to the
technique of function reordering when used with KASLR, as well as finer grained
KASLR in general.
Proposed Improvement
--------------------
This patch set proposes adding function reordering on top of the existing
KASLR base address randomization. The over-arching objective is incremental
improvement over what we already have. It is designed to work in combination
with the existing solution. The implementation is really pretty simple, and
there are 2 main area where changes occur:
* Build time
GCC has had an option to place functions into individual .text sections for
many years now. This option can be used to implement function reordering at
load time. The final compiled vmlinux retains all the section headers, which
can be used to help find the address ranges of each function. Using this
information and an expanded table of relocation addresses, individual text
sections can be suffled immediately after decompression. Some data tables
inside the kernel that have assumptions about order require re-sorting
after being updated when applying relocations. In order to modify these tables,
a few key symbols are excluded from the objcopy symbol stripping process for
use after shuffling the text segments.
Some highlights from the build time changes to look for:
The top level kernel Makefile was modified to add the gcc flag if it
is supported. Currently, I am applying this flag to everything it is
possible to randomize. Anything that is written in C and not present in a
special input section is randomized. The final binary segment 0 retains a
consolidated .text section, as well as all the individual .text.* sections.
Future work could turn off this flags for selected files or even entire
subsystems, although obviously at the cost of security.
The relocs tool is updated to add relative relocations. This information
previously wasn't included because it wasn't necessary when moving the
entire .text segment as a unit.
A new file was created to contain a list of symbols that objcopy should
keep. We use those symbols at load time as described below.
* Load time
The boot kernel was modified to parse the vmlinux elf file after
decompression to check for our interesting symbols that we kept, and to
look for any .text.* sections to randomize. The consolidated .text section
is skipped and not moved. The sections are shuffled randomly, and copied
into memory following the .text section in a new random order. The existing
code which updated relocation addresses was modified to account for
not just a fixed delta from the load address, but the offset that the function
section was moved to. This requires inspection of each address to see if
it was impacted by a randomization. We use a bsearch to make this less
horrible on performance. Any tables that need to be modified with new
addresses or resorted are updated using the symbol addresses parsed from the
elf symbol table.
In order to hide our new layout, symbols reported through /proc/kallsyms
will be displayed in a random order.
Security Considerations
-----------------------
The objective of this patch set is to improve a technology that is already
merged into the kernel (KASLR). This code will not prevent all attacks,
but should instead be considered as one of several tools that can be used.
In particular, this code is meant to make KASLR more effective in the presence
of info leaks.
How much entropy we are adding to the existing entropy of standard KASLR will
depend on a few variables. Firstly and most obviously, the number of functions
that are randomized matters. This implementation keeps the existing .text
section for code that cannot be randomized - for example, because it was
assembly code. The less sections to randomize, the less entropy. In addition,
due to alignment (16 bytes for x86_64), the number of bits in a address that
the attacker needs to guess is reduced, as the lower bits are identical.
Performance Impact
------------------
There are two areas where function reordering can impact performance: boot
time latency, and run time performance.
* Boot time latency
This implementation of finer grained KASLR impacts the boot time of the kernel
in several places. It requires additional parsing of the kernel ELF file to
obtain the section headers of the sections to be randomized. It calls the
random number generator for each section to be randomized to determine that
section's new memory location. It copies the decompressed kernel into a new
area of memory to avoid corruption when laying out the newly randomized
sections. It increases the number of relocations the kernel has to perform at
boot time vs. standard KASLR, and it also requires a lookup on each address
that needs to be relocated to see if it was in a randomized section and needs
to be adjusted by a new offset. Finally, it re-sorts a few data tables that
are required to be sorted by address.
Booting a test VM on a modern, well appointed system showed an increase in
latency of approximately 1 second.
* Run time
The performance impact at run-time of function reordering varies by workload.
Using kcbench, a kernel compilation benchmark, the performance of a kernel
build with finer grained KASLR was about 1% slower than a kernel with standard
KASLR. Analysis with perf showed a slightly higher percentage of
L1-icache-load-misses. Other workloads were examined as well, with varied
results. Some workloads performed significantly worse under FGKASLR, while
others stayed the same or were mysteriously better. In general, it will
depend on the code flow whether or not finer grained KASLR will impact
your workload, and how the underlying code was designed. Because the layout
changes per boot, each time a system is rebooted the performance of a workload
may change.
Future work could identify hot areas that may not be randomized and either
leave them in the .text section or group them together into a single section
that may be randomized. If grouping things together helps, one other thing to
consider is that if we could identify text blobs that should be grouped together
to benefit a particular code flow, it could be interesting to explore
whether this security feature could be also be used as a performance
feature if you are interested in optimizing your kernel layout for a
particular workload at boot time. Optimizing function layout for a particular
workload has been researched and proven effective - for more information
read the Facebook paper "Optimizing Function Placement for Large-Scale
Data-Center Applications" (see references section below).
Image Size
----------
Adding additional section headers as a result of compiling with
-ffunction-sections will increase the size of the vmlinux ELF file.
With a standard distro config, the resulting vmlinux was increased by
about 3%. The compressed image is also increased due to the header files,
as well as the extra relocations that must be added. You can expect fgkaslr
to increase the size of the compressed image by about 15%.
Memory Usage
------------
fgkaslr increases the amount of heap that is required at boot time,
although this extra memory is released when the kernel has finished
decompression. As a result, it may not be appropriate to use this feature on
systems without much memory.
Building
--------
To enable fine grained KASLR, you need to have the following config options
set (including all the ones you would use to build normal KASLR)
CONFIG_FG_KASLR=y
In addition, fgkaslr is only supported for the X86_64 architecture.
Modules
-------
Modules are randomized similarly to the rest of the kernel by shuffling
the sections at load time prior to moving them into memory. The module must
also have been build with the -ffunction-sections compiler option.
Although fgkaslr for the kernel is only supported for the X86_64 architecture,
it is possible to use fgkaslr with modules on other architectures. To enable
this feature, select
CONFIG_MODULE_FG_KASLR=y
This option is selected automatically for X86_64 when CONFIG_FG_KASLR is set.
Disabling
---------
Disabling normal KASLR using the nokaslr command line option also disables
fgkaslr. It is also possible to disable fgkaslr separately by booting with
nofgkaslr on the commandline.
References
----------
There are a lot of academic papers which explore finer grained ASLR.
This paper in particular contributed the most to my implementation design
as well as my overall understanding of the problem space:
Selfrando: Securing the Tor Browser against De-anonymization Exploits,
M. Conti, S. Crane, T. Frassetto, et al.
For more information on how function layout impacts performance, see:
Optimizing Function Placement for Large-Scale Data-Center Applications,
G. Ottoni, B. Maher
Alexander Lobakin (9):
modpost: fix removing numeric suffixes
livepatch: use `-z unique-symbol` if available to nuke pos-based
search
arch: introduce ASM function sections
x86: support ASM function sections
x86: decouple ORC table sorting into a separate file
FG-KASLR: use a scripted approach to handle .text.* sections
x86/boot: allow FG-KASLR to be selected
module: use a scripted approach for FG-KASLR
maintainers: add MAINTAINERS entry for FG-KASLR
Kristen Carlson Accardi (6):
kallsyms: Hide layout
Makefile: Add build and config option for CONFIG_FG_KASLR
x86/tools: Add relative relocs for randomized functions
x86: Add support for function granular KASLR
module: Reorder functions
Documentation: add documentation for FG-KASLR
.gitignore | 1 +
.../admin-guide/kernel-parameters.txt | 6 +
Documentation/security/fgkaslr.rst | 172 ++++
Documentation/security/index.rst | 1 +
MAINTAINERS | 12 +
Makefile | 41 +-
arch/Kconfig | 10 +
arch/x86/Kconfig | 2 +
arch/x86/boot/Makefile | 1 +
arch/x86/boot/compressed/.gitignore | 1 +
arch/x86/boot/compressed/Makefile | 21 +-
arch/x86/boot/compressed/fgkaslr.c | 755 ++++++++++++++++++
arch/x86/boot/compressed/gen-symbols.h | 30 +
arch/x86/boot/compressed/head_32.S | 2 +-
arch/x86/boot/compressed/head_64.S | 32 +-
arch/x86/boot/compressed/misc.c | 153 +++-
arch/x86/boot/compressed/misc.h | 28 +
arch/x86/boot/compressed/utils.c | 13 +
arch/x86/boot/pmjump.S | 2 +-
arch/x86/crypto/aesni-intel_asm.S | 4 +-
arch/x86/crypto/poly1305-x86_64-cryptogams.pl | 4 +
arch/x86/entry/entry_64.S | 2 +-
arch/x86/include/asm/boot.h | 13 +-
arch/x86/include/asm/orc_types.h | 7 +
arch/x86/include/asm/paravirt.h | 2 +
arch/x86/include/asm/qspinlock_paravirt.h | 2 +
arch/x86/kernel/head_32.S | 4 +-
arch/x86/kernel/head_64.S | 4 +-
arch/x86/kernel/kprobes/core.c | 2 +
arch/x86/kernel/kvm.c | 2 +
arch/x86/kernel/relocate_kernel_32.S | 10 +-
arch/x86/kernel/relocate_kernel_64.S | 12 +-
arch/x86/kernel/unwind_orc.c | 63 +-
arch/x86/kernel/vmlinux.lds.S | 10 +-
arch/x86/kvm/emulate.c | 7 +-
arch/x86/lib/Makefile | 1 +
arch/x86/lib/copy_user_64.S | 2 +-
arch/x86/lib/error-inject.c | 2 +
arch/x86/lib/getuser.S | 5 +-
arch/x86/lib/memcpy_64.S | 4 +-
arch/x86/lib/memmove_64.S | 5 +-
arch/x86/lib/memset_64.S | 5 +-
arch/x86/lib/orc.c | 76 ++
arch/x86/lib/putuser.S | 2 +-
arch/x86/power/hibernate_asm_32.S | 10 +-
arch/x86/power/hibernate_asm_64.S | 10 +-
arch/x86/tools/relocs.c | 32 +-
arch/x86/tools/relocs.h | 4 +-
arch/x86/tools/relocs_common.c | 14 +-
include/asm-generic/vmlinux.lds.h | 57 +-
include/linux/linkage.h | 120 ++-
include/linux/random.h | 16 +
include/uapi/linux/elf.h | 1 +
init/Kconfig | 69 ++
kernel/kallsyms.c | 93 ++-
kernel/livepatch/core.c | 20 +-
kernel/module.c | 73 +-
scripts/Makefile.modfinal | 20 +-
scripts/generate_text_sections.pl | 172 ++++
scripts/link-vmlinux.sh | 29 +-
scripts/mod/modpost.c | 48 +-
scripts/module.lds.S | 14 +-
scripts/sorttable.h | 5 -
tools/arch/x86/include/asm/orc_types.h | 7 +
64 files changed, 2123 insertions(+), 224 deletions(-)
create mode 100644 Documentation/security/fgkaslr.rst
create mode 100644 arch/x86/boot/compressed/fgkaslr.c
create mode 100644 arch/x86/boot/compressed/gen-symbols.h
create mode 100644 arch/x86/boot/compressed/utils.c
create mode 100644 arch/x86/lib/orc.c
create mode 100755 scripts/generate_text_sections.pl
--
2.33.1
For now, that condition from remove_dot():
if (m && (s[n + m] == '.' || s[n + m] == 0))
which was designed to test if it's a dot or a \0 after the suffix
is never satisfied.
This is due to that s[n + m] always points to the last digit of a
numeric suffix, not on the symbol next to it:
param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
So it's off by one and was like that since 2014.
`-z uniq-symbol` linker flag which we are planning to use to
simplify livepatching brings numeric suffixes back, fix this.
Otherwise:
ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL
Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning")
Cc: [email protected] # 3.17+
Signed-off-by: Alexander Lobakin <[email protected]>
---
scripts/mod/modpost.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index cb8ab7d91d30..ccc6d35580f2 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1971,7 +1971,7 @@ static char *remove_dot(char *s)
if (n && s[n]) {
size_t m = strspn(s + n + 1, "0123456789");
- if (m && (s[n + m] == '.' || s[n + m] == 0))
+ if (m && (s[n + m + 1] == '.' || s[n + m + 1] == 0))
s[n] = 0;
/* strip trailing .lto */
--
2.33.1
Address places which need special care and enable
CONFIG_ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS.
Notably:
- propagate --sectname-subst to aflags in x86/boot/Makefile and
x86/boot/compressed/Makefile as both override aflags;
- symbols starting with a dot (like ".Lbad_gs") should be handled
manually with SYM_*_START_SECT(.Lbad_gs, bad_gs) as "two dots"
is a special (and CPP doesn't want to concatenate two dots in
general);
- some symbols explicitly need to reside in one section (like
kexec control code, hibernation page etc.);
- macros creating aliases for functions (like __memcpy() for
memcpy() etc.) should go after the main declaration (as
aliases should be declared in the same section and they
don't have SYM_PUSH_SECTION() inside);
- things like ".org", ".align" should be manually pushed to
the same section the next symbol goes to;
- expand indirect_thunk and .fixup wildcards in vmlinux.lds.S
to catch symbols back into the "main" section;
- inline ASM functions like __raw_callee*() should be pushed
manually as well.
With these changes and `-ffunction-sections enabled`, "plain"
".text" section is empty which means that everything works
right as expected.
Signed-off-by: Alexander Lobakin <[email protected]>
---
arch/x86/Kconfig | 1 +
arch/x86/boot/Makefile | 1 +
arch/x86/boot/compressed/Makefile | 1 +
arch/x86/boot/compressed/head_32.S | 2 +-
arch/x86/boot/compressed/head_64.S | 32 ++++++++++++-------
arch/x86/boot/pmjump.S | 2 +-
arch/x86/crypto/aesni-intel_asm.S | 4 +--
arch/x86/crypto/poly1305-x86_64-cryptogams.pl | 4 +++
arch/x86/entry/entry_64.S | 2 +-
arch/x86/include/asm/paravirt.h | 2 ++
arch/x86/include/asm/qspinlock_paravirt.h | 2 ++
arch/x86/kernel/head_32.S | 4 +--
arch/x86/kernel/head_64.S | 4 +--
arch/x86/kernel/kprobes/core.c | 2 ++
arch/x86/kernel/kvm.c | 2 ++
arch/x86/kernel/relocate_kernel_32.S | 10 +++---
arch/x86/kernel/relocate_kernel_64.S | 12 ++++---
arch/x86/kernel/vmlinux.lds.S | 4 +--
arch/x86/kvm/emulate.c | 7 +++-
arch/x86/lib/copy_user_64.S | 2 +-
arch/x86/lib/error-inject.c | 2 ++
arch/x86/lib/getuser.S | 5 ++-
arch/x86/lib/memcpy_64.S | 4 +--
arch/x86/lib/memmove_64.S | 5 ++-
arch/x86/lib/memset_64.S | 5 +--
arch/x86/lib/putuser.S | 2 +-
arch/x86/power/hibernate_asm_32.S | 10 +++---
arch/x86/power/hibernate_asm_64.S | 10 +++---
28 files changed, 91 insertions(+), 52 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5c2ccb85f2ef..3e4ea355147b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -102,6 +102,7 @@ config X86
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_STACKWALK
select ARCH_SUPPORTS_ACPI
+ select ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEBUG_PAGEALLOC
select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index b5aecb524a8a..080990b09f06 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -68,6 +68,7 @@ targets += cpustr.h
KBUILD_CFLAGS := $(REALMODE_CFLAGS) -D_SETUP
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
+KBUILD_AFLAGS += $(SECSUBST_AFLAGS)
KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
GCOV_PROFILE := n
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 431bf7f846c3..4bf32db56010 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -55,6 +55,7 @@ KBUILD_CFLAGS += $(CLANG_FLAGS)
CFLAGS_sev.o += -I$(objtree)/arch/x86/lib/
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
+KBUILD_AFLAGS += $(SECSUBST_AFLAGS)
GCOV_PROFILE := n
UBSAN_SANITIZE :=n
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 659fad53ca82..a3a667f5e5cd 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -158,8 +158,8 @@ SYM_FUNC_START_ALIAS(efi_stub_entry)
call efi_main
/* efi_main returns the possibly relocated address of startup_32 */
jmp *%eax
-SYM_FUNC_END(efi32_stub_entry)
SYM_FUNC_END_ALIAS(efi_stub_entry)
+SYM_FUNC_END(efi32_stub_entry)
#endif
.text
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 572c535cf45b..c496dab184ef 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -72,7 +72,7 @@
#define rva(X) ((X) - startup_32)
.code32
-SYM_FUNC_START(startup_32)
+SYM_FUNC_START_SECT(startup_32, startup)
/*
* 32bit entry is 0 and it is ABI so immutable!
* If we come here directly from a bootloader,
@@ -297,8 +297,10 @@ SYM_FUNC_START(startup_32)
SYM_FUNC_END(startup_32)
#ifdef CONFIG_EFI_MIXED
+SYM_PUSH_SECTION(startup)
.org 0x190
-SYM_FUNC_START(efi32_stub_entry)
+SYM_POP_SECTION()
+SYM_FUNC_START_SECT(efi32_stub_entry, startup)
add $0x4, %esp /* Discard return address */
popl %ecx
popl %edx
@@ -332,8 +334,10 @@ SYM_FUNC_END(efi32_stub_entry)
#endif
.code64
+SYM_PUSH_SECTION(startup)
.org 0x200
-SYM_CODE_START(startup_64)
+SYM_POP_SECTION()
+SYM_CODE_START_SECT(startup_64, startup)
/*
* 64bit entry is 0x200 and it is ABI so immutable!
* We come here either from startup_32 or directly from a
@@ -533,8 +537,10 @@ trampoline_return:
SYM_CODE_END(startup_64)
#ifdef CONFIG_EFI_STUB
+SYM_PUSH_SECTION(startup)
.org 0x390
-SYM_FUNC_START(efi64_stub_entry)
+SYM_POP_SECTION()
+SYM_FUNC_START_SECT(efi64_stub_entry, startup)
SYM_FUNC_START_ALIAS(efi_stub_entry)
and $~0xf, %rsp /* realign the stack */
movq %rdx, %rbx /* save boot_params pointer */
@@ -542,12 +548,12 @@ SYM_FUNC_START_ALIAS(efi_stub_entry)
movq %rbx,%rsi
leaq rva(startup_64)(%rax), %rax
jmp *%rax
-SYM_FUNC_END(efi64_stub_entry)
SYM_FUNC_END_ALIAS(efi_stub_entry)
+SYM_FUNC_END(efi64_stub_entry)
#endif
.text
-SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
+SYM_FUNC_START_LOCAL_NOALIGN_SECT(.Lrelocated, relocated)
/*
* Clear BSS (stack is currently empty)
@@ -670,20 +676,22 @@ SYM_CODE_START(trampoline_32bit_src)
SYM_CODE_END(trampoline_32bit_src)
.code64
-SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled)
+SYM_FUNC_START_LOCAL_NOALIGN_SECT(.Lpaging_enabled, trampoline_32bit_src)
/* Return from the trampoline */
jmp *%rdi
SYM_FUNC_END(.Lpaging_enabled)
+SYM_PUSH_SECTION(trampoline_32bit_src)
/*
* The trampoline code has a size limit.
* Make sure we fail to compile if the trampoline code grows
* beyond TRAMPOLINE_32BIT_CODE_SIZE bytes.
*/
.org trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE
+SYM_POP_SECTION()
.code32
-SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
+SYM_FUNC_START_LOCAL_NOALIGN_SECT(.Lno_longmode, no_longmode)
/* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */
1:
hlt
@@ -747,7 +755,7 @@ SYM_DATA(efi_is64, .byte 1)
__HEAD
.code32
-SYM_FUNC_START(efi32_pe_entry)
+SYM_FUNC_START_SECT(efi32_pe_entry, startup)
/*
* efi_status_t efi32_pe_entry(efi_handle_t image_handle,
* efi_system_table_32_t *sys_table)
@@ -839,7 +847,7 @@ SYM_DATA_END(loaded_image_proto)
*
* Physical offset is expected in %ebp
*/
-SYM_FUNC_START(startup32_set_idt_entry)
+SYM_FUNC_START_SECT(startup32_set_idt_entry, startup)
push %ebx
push %ecx
@@ -872,7 +880,7 @@ SYM_FUNC_START(startup32_set_idt_entry)
SYM_FUNC_END(startup32_set_idt_entry)
#endif
-SYM_FUNC_START(startup32_load_idt)
+SYM_FUNC_START_SECT(startup32_load_idt, startup)
#ifdef CONFIG_AMD_MEM_ENCRYPT
/* #VC handler */
leal rva(startup32_vc_handler)(%ebp), %eax
@@ -904,7 +912,7 @@ SYM_FUNC_END(startup32_load_idt)
* succeed. An incorrect C-bit position will map all memory unencrypted, so that
* the compare will use the encrypted random data and fail.
*/
-SYM_FUNC_START(startup32_check_sev_cbit)
+SYM_FUNC_START_SECT(startup32_check_sev_cbit, startup)
#ifdef CONFIG_AMD_MEM_ENCRYPT
pushl %eax
pushl %ebx
diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S
index cbec8bd0841f..e647c17000a9 100644
--- a/arch/x86/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
@@ -46,7 +46,7 @@ SYM_FUNC_END(protected_mode_jump)
.code32
.section ".text32","ax"
-SYM_FUNC_START_LOCAL_NOALIGN(.Lin_pm32)
+SYM_FUNC_START_LOCAL_NOALIGN_SECT(.Lin_pm32, in_pm32)
# Set up data segments for flat 32-bit mode
movl %ecx, %ds
movl %ecx, %es
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 4e3972570916..d3d511058520 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -1752,8 +1752,8 @@ SYM_FUNC_END(aesni_gcm_finalize)
#endif
-SYM_FUNC_START_LOCAL_ALIAS(_key_expansion_128)
SYM_FUNC_START_LOCAL(_key_expansion_256a)
+SYM_FUNC_START_LOCAL_ALIAS(_key_expansion_128)
pshufd $0b11111111, %xmm1, %xmm1
shufps $0b00010000, %xmm0, %xmm4
pxor %xmm4, %xmm0
@@ -1763,8 +1763,8 @@ SYM_FUNC_START_LOCAL(_key_expansion_256a)
movaps %xmm0, (TKEYP)
add $0x10, TKEYP
ret
-SYM_FUNC_END(_key_expansion_256a)
SYM_FUNC_END_ALIAS(_key_expansion_128)
+SYM_FUNC_END(_key_expansion_256a)
SYM_FUNC_START_LOCAL(_key_expansion_192a)
pshufd $0b01010101, %xmm1, %xmm1
diff --git a/arch/x86/crypto/poly1305-x86_64-cryptogams.pl b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
index 71fae5a09e56..221a4596f390 100644
--- a/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
+++ b/arch/x86/crypto/poly1305-x86_64-cryptogams.pl
@@ -421,6 +421,7 @@ my ($H0,$H1,$H2,$H3,$H4, $T0,$T1,$T2,$T3,$T4, $D0,$D1,$D2,$D3,$D4, $MASK) =
map("%xmm$_",(0..15));
$code.=<<___;
+SYM_PUSH_SECTION(__poly1305_block)
.type __poly1305_block,\@abi-omnipotent
.align 32
__poly1305_block:
@@ -431,7 +432,9 @@ $code.=<<___;
pop $ctx
ret
.size __poly1305_block,.-__poly1305_block
+SYM_POP_SECTION()
+SYM_PUSH_SECTION(__poly1305_init_avx)
.type __poly1305_init_avx,\@abi-omnipotent
.align 32
__poly1305_init_avx:
@@ -596,6 +599,7 @@ __poly1305_init_avx:
pop %rbp
ret
.size __poly1305_init_avx,.-__poly1305_init_avx
+SYM_POP_SECTION()
___
&declare_function("poly1305_blocks_avx", 32, 4);
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 97b1f84bb53f..15eae25753fb 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -745,7 +745,7 @@ EXPORT_SYMBOL(asm_load_gs_index)
_ASM_EXTABLE(.Lgs_change, .Lbad_gs)
.section .fixup, "ax"
/* running with kernelgs */
-SYM_CODE_START_LOCAL_NOALIGN(.Lbad_gs)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(.Lbad_gs, bad_gs)
swapgs /* switch back to user gs */
.macro ZAP_GS
/* This can't be a string because the preprocessor needs to see it. */
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 21c4a694ca11..f045af533161 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -663,6 +663,7 @@ bool __raw_callee_save___native_vcpu_is_preempted(long cpu);
extern typeof(func) __raw_callee_save_##func; \
\
asm(".pushsection " section ", \"ax\";" \
+ ASM_PUSH_SECTION(__raw_callee_save_##func) ";" \
".globl " PV_THUNK_NAME(func) ";" \
".type " PV_THUNK_NAME(func) ", @function;" \
PV_THUNK_NAME(func) ":" \
@@ -673,6 +674,7 @@ bool __raw_callee_save___native_vcpu_is_preempted(long cpu);
FRAME_END \
"ret;" \
".size " PV_THUNK_NAME(func) ", .-" PV_THUNK_NAME(func) ";" \
+ ASM_POP_SECTION() ";" \
".popsection")
#define PV_CALLEE_SAVE_REGS_THUNK(func) \
diff --git a/arch/x86/include/asm/qspinlock_paravirt.h b/arch/x86/include/asm/qspinlock_paravirt.h
index 159622ee0674..209f610dda18 100644
--- a/arch/x86/include/asm/qspinlock_paravirt.h
+++ b/arch/x86/include/asm/qspinlock_paravirt.h
@@ -35,6 +35,7 @@ PV_CALLEE_SAVE_REGS_THUNK(__pv_queued_spin_unlock_slowpath);
* rdx = internal variable (set to 0)
*/
asm (".pushsection .text;"
+ ASM_PUSH_SECTION(__raw_callee_save___pv_queued_spin_unlock) ";"
".globl " PV_UNLOCK ";"
".type " PV_UNLOCK ", @function;"
".align 4,0x90;"
@@ -58,6 +59,7 @@ asm (".pushsection .text;"
FRAME_END
"ret;"
".size " PV_UNLOCK ", .-" PV_UNLOCK ";"
+ ASM_POP_SECTION() ";"
".popsection");
#else /* CONFIG_64BIT */
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index d8c64dab0efe..aa7a99876397 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -342,7 +342,7 @@ setup_once:
andl $0,setup_once_ref /* Once is enough, thanks */
ret
-SYM_FUNC_START(early_idt_handler_array)
+SYM_FUNC_START_SECT(early_idt_handler_array, early_idt_handler)
# 36(%esp) %eflags
# 32(%esp) %cs
# 28(%esp) %eip
@@ -359,7 +359,7 @@ SYM_FUNC_START(early_idt_handler_array)
.endr
SYM_FUNC_END(early_idt_handler_array)
-SYM_CODE_START_LOCAL(early_idt_handler_common)
+SYM_CODE_START_LOCAL_SECT(early_idt_handler_common, early_idt_handler)
/*
* The stack is the hardware frame, an error code or zero, and the
* vector number.
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index d8b3ebd2bb85..1bc081c92775 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -350,7 +350,7 @@ SYM_DATA(initial_stack, .quad init_thread_union + THREAD_SIZE - FRAME_SIZE)
__FINITDATA
__INIT
-SYM_CODE_START(early_idt_handler_array)
+SYM_CODE_START_SECT(early_idt_handler_array, early_idt_handler)
i = 0
.rept NUM_EXCEPTION_VECTORS
.if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
@@ -368,7 +368,7 @@ SYM_CODE_START(early_idt_handler_array)
UNWIND_HINT_IRET_REGS offset=16
SYM_CODE_END(early_idt_handler_array)
-SYM_CODE_START_LOCAL(early_idt_handler_common)
+SYM_CODE_START_LOCAL_SECT(early_idt_handler_common, early_idt_handler)
/*
* The stack is the hardware frame, an error code or zero, and the
* vector number.
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index fce99e249d61..6938dccfa4a7 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -1019,6 +1019,7 @@ NOKPROBE_SYMBOL(kprobe_int3_handler);
*/
asm(
".text\n"
+ ASM_PUSH_SECTION(__kretprobe_trampoline) "\n"
".global __kretprobe_trampoline\n"
".type __kretprobe_trampoline, @function\n"
"__kretprobe_trampoline:\n"
@@ -1053,6 +1054,7 @@ asm(
#endif
" ret\n"
".size __kretprobe_trampoline, .-__kretprobe_trampoline\n"
+ ASM_POP_SECTION() "\n"
);
NOKPROBE_SYMBOL(__kretprobe_trampoline);
/*
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 59abbdad7729..25a08ba473a0 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -1021,6 +1021,7 @@ extern bool __raw_callee_save___kvm_vcpu_is_preempted(long);
*/
asm(
".pushsection .text;"
+ASM_PUSH_SECTION(__raw_callee_save___kvm_vcpu_is_preempted) ";"
".global __raw_callee_save___kvm_vcpu_is_preempted;"
".type __raw_callee_save___kvm_vcpu_is_preempted, @function;"
"__raw_callee_save___kvm_vcpu_is_preempted:"
@@ -1029,6 +1030,7 @@ asm(
"setne %al;"
"ret;"
".size __raw_callee_save___kvm_vcpu_is_preempted, .-__raw_callee_save___kvm_vcpu_is_preempted;"
+ASM_POP_SECTION() ";"
".popsection");
#endif
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index f469153eca8a..9077aa9367ca 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -35,7 +35,7 @@
#define CP_PA_BACKUP_PAGES_MAP DATA(0x1c)
.text
-SYM_CODE_START_NOALIGN(relocate_kernel)
+SYM_CODE_START_NOALIGN_SECT(relocate_kernel, kexec_control_code)
/* Save the CPU context, used for jumping back */
pushl %ebx
@@ -94,7 +94,7 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
ret
SYM_CODE_END(relocate_kernel)
-SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(identity_mapped, kexec_control_code)
/* set return address to 0 if not preserving context */
pushl $0
/* store the start address on the stack */
@@ -193,7 +193,7 @@ SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
ret
SYM_CODE_END(identity_mapped)
-SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(virtual_mapped, kexec_control_code)
movl CR4(%edi), %eax
movl %eax, %cr4
movl CR3(%edi), %eax
@@ -212,7 +212,7 @@ SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
SYM_CODE_END(virtual_mapped)
/* Do the copies */
-SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(swap_pages, kexec_control_code)
movl 8(%esp), %edx
movl 4(%esp), %ecx
pushl %ebp
@@ -274,5 +274,7 @@ SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
ret
SYM_CODE_END(swap_pages)
+SYM_PUSH_SECTION(kexec_control_code)
.globl kexec_control_code_size
.set kexec_control_code_size, . - relocate_kernel
+SYM_POP_SECTION()
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index c8fe74a28143..91336d71dd2d 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -38,9 +38,11 @@
#define CP_PA_BACKUP_PAGES_MAP DATA(0x30)
.text
+SYM_PUSH_SECTION(kexec_control_code)
.align PAGE_SIZE
.code64
-SYM_CODE_START_NOALIGN(relocate_kernel)
+SYM_POP_SECTION()
+SYM_CODE_START_NOALIGN_SECT(relocate_kernel, kexec_control_code)
UNWIND_HINT_EMPTY
/*
* %rdi indirection_page
@@ -107,7 +109,7 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
ret
SYM_CODE_END(relocate_kernel)
-SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(identity_mapped, kexec_control_code)
UNWIND_HINT_EMPTY
/* set return address to 0 if not preserving context */
pushq $0
@@ -213,7 +215,7 @@ SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
ret
SYM_CODE_END(identity_mapped)
-SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(virtual_mapped, kexec_control_code)
UNWIND_HINT_EMPTY
movq RSP(%r8), %rsp
movq CR4(%r8), %rax
@@ -235,7 +237,7 @@ SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
SYM_CODE_END(virtual_mapped)
/* Do the copies */
-SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
+SYM_CODE_START_LOCAL_NOALIGN_SECT(swap_pages, kexec_control_code)
UNWIND_HINT_EMPTY
movq %rdi, %rcx /* Put the page_list in %rcx */
xorl %edi, %edi
@@ -291,5 +293,7 @@ SYM_CODE_START_LOCAL_NOALIGN(swap_pages)
ret
SYM_CODE_END(swap_pages)
+SYM_PUSH_SECTION(kexec_control_code)
.globl kexec_control_code_size
.set kexec_control_code_size, . - relocate_kernel
+SYM_POP_SECTION()
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 3d6dc12d198f..6f026400261e 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -137,12 +137,12 @@ SECTIONS
ALIGN_ENTRY_TEXT_END
SOFTIRQENTRY_TEXT
STATIC_CALL_TEXT
- *(.fixup)
+ *(SECT_WILDCARD(.fixup))
*(.gnu.warning)
#ifdef CONFIG_RETPOLINE
__indirect_thunk_start = .;
- *(.text.__x86.indirect_thunk)
+ *(SECT_WILDCARD(.text.__x86.indirect_thunk))
__indirect_thunk_end = .;
#endif
} :text =0xcccc
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 28b1a4e57827..00466f15c4ed 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -307,6 +307,7 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop);
#define __FOP_FUNC(name) \
+ __ASM_PUSH_SECTION(name) "\n\t" \
".align " __stringify(FASTOP_SIZE) " \n\t" \
".type " name ", @function \n\t" \
name ":\n\t"
@@ -316,7 +317,8 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop);
#define __FOP_RET(name) \
"ret \n\t" \
- ".size " name ", .-" name "\n\t"
+ ".size " name ", .-" name "\n\t" \
+ ASM_POP_SECTION() "\n\t"
#define FOP_RET(name) \
__FOP_RET(#name)
@@ -324,11 +326,13 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop);
#define FOP_START(op) \
extern void em_##op(struct fastop *fake); \
asm(".pushsection .text, \"ax\" \n\t" \
+ ASM_PUSH_SECTION(em_##op) "\n\t" \
".global em_" #op " \n\t" \
".align " __stringify(FASTOP_SIZE) " \n\t" \
"em_" #op ":\n\t"
#define FOP_END \
+ ASM_POP_SECTION() "\n\t" \
".popsection")
#define __FOPNOP(name) \
@@ -428,6 +432,7 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop);
/* Special case for SETcc - 1 instruction per cc */
#define FOP_SETCC(op) \
+ ASM_PUSH_SECTION(op) "\n\t" \
".align 4 \n\t" \
".type " #op ", @function \n\t" \
#op ": \n\t" \
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 2797e630b9b1..d351e1288a23 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -232,7 +232,7 @@ EXPORT_SYMBOL(copy_user_enhanced_fast_string)
* Output:
* eax uncopied bytes or 0 if successful.
*/
-SYM_CODE_START_LOCAL(.Lcopy_user_handle_tail)
+SYM_CODE_START_LOCAL_SECT(.Lcopy_user_handle_tail, copy_user_handle_tail)
movl %edx,%ecx
1: rep movsb
2: mov %ecx,%eax
diff --git a/arch/x86/lib/error-inject.c b/arch/x86/lib/error-inject.c
index be5b5fb1598b..e3ecab588a4c 100644
--- a/arch/x86/lib/error-inject.c
+++ b/arch/x86/lib/error-inject.c
@@ -7,11 +7,13 @@ asmlinkage void just_return_func(void);
asm(
".text\n"
+ ASM_PUSH_SECTION(just_return_func) "\n"
".type just_return_func, @function\n"
".globl just_return_func\n"
"just_return_func:\n"
" ret\n"
".size just_return_func, .-just_return_func\n"
+ ASM_POP_SECTION() "\n"
);
void override_function_with_return(struct pt_regs *regs)
diff --git a/arch/x86/lib/getuser.S b/arch/x86/lib/getuser.S
index fa1bc2104b32..35d93412605a 100644
--- a/arch/x86/lib/getuser.S
+++ b/arch/x86/lib/getuser.S
@@ -163,8 +163,7 @@ SYM_FUNC_START(__get_user_nocheck_8)
SYM_FUNC_END(__get_user_nocheck_8)
EXPORT_SYMBOL(__get_user_nocheck_8)
-
-SYM_CODE_START_LOCAL(.Lbad_get_user_clac)
+SYM_CODE_START_LOCAL_SECT(.Lbad_get_user_clac, bad_get_user_clac)
ASM_CLAC
bad_get_user:
xor %edx,%edx
@@ -173,7 +172,7 @@ bad_get_user:
SYM_CODE_END(.Lbad_get_user_clac)
#ifdef CONFIG_X86_32
-SYM_CODE_START_LOCAL(.Lbad_get_user_8_clac)
+SYM_CODE_START_LOCAL_SECT(.Lbad_get_user_8_clac, bad_get_user_8_clac)
ASM_CLAC
bad_get_user_8:
xor %edx,%edx
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 1cc9da6e29c7..1414c62f7c32 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -27,8 +27,8 @@
* Output:
* rax original destination
*/
-SYM_FUNC_START_ALIAS(__memcpy)
SYM_FUNC_START_WEAK(memcpy)
+SYM_FUNC_START_ALIAS(__memcpy)
ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
"jmp memcpy_erms", X86_FEATURE_ERMS
@@ -40,8 +40,8 @@ SYM_FUNC_START_WEAK(memcpy)
movl %edx, %ecx
rep movsb
ret
-SYM_FUNC_END(memcpy)
SYM_FUNC_END_ALIAS(__memcpy)
+SYM_FUNC_END(memcpy)
EXPORT_SYMBOL(memcpy)
EXPORT_SYMBOL(__memcpy)
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 64801010d312..e397791ec067 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -24,9 +24,8 @@
* Output:
* rax: dest
*/
-SYM_FUNC_START_WEAK(memmove)
SYM_FUNC_START(__memmove)
-
+SYM_FUNC_START_WEAK_ALIAS(memmove)
mov %rdi, %rax
/* Decide forward/backward copy mode */
@@ -206,7 +205,7 @@ SYM_FUNC_START(__memmove)
movb %r11b, (%rdi)
13:
retq
-SYM_FUNC_END(__memmove)
SYM_FUNC_END_ALIAS(memmove)
+SYM_FUNC_END(__memmove)
EXPORT_SYMBOL(__memmove)
EXPORT_SYMBOL(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 9827ae267f96..5fa7f64edc9c 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -17,8 +17,9 @@
*
* rax original destination
*/
-SYM_FUNC_START_WEAK(memset)
+
SYM_FUNC_START(__memset)
+SYM_FUNC_START_WEAK_ALIAS(memset)
/*
* Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
* to use it when possible. If not available, use fast string instructions.
@@ -41,8 +42,8 @@ SYM_FUNC_START(__memset)
rep stosb
movq %r9,%rax
ret
-SYM_FUNC_END(__memset)
SYM_FUNC_END_ALIAS(memset)
+SYM_FUNC_END(__memset)
EXPORT_SYMBOL(memset)
EXPORT_SYMBOL(__memset)
diff --git a/arch/x86/lib/putuser.S b/arch/x86/lib/putuser.S
index 0ea344c5ea43..a7e1be50841a 100644
--- a/arch/x86/lib/putuser.S
+++ b/arch/x86/lib/putuser.S
@@ -102,7 +102,7 @@ SYM_FUNC_END(__put_user_8)
EXPORT_SYMBOL(__put_user_8)
EXPORT_SYMBOL(__put_user_nocheck_8)
-SYM_CODE_START_LOCAL(.Lbad_put_user_clac)
+SYM_CODE_START_LOCAL_SECT(.Lbad_put_user_clac, bad_put_user_clac)
ASM_CLAC
.Lbad_put_user:
movl $-EFAULT,%ecx
diff --git a/arch/x86/power/hibernate_asm_32.S b/arch/x86/power/hibernate_asm_32.S
index 8786653ad3c0..492dd2bcce4b 100644
--- a/arch/x86/power/hibernate_asm_32.S
+++ b/arch/x86/power/hibernate_asm_32.S
@@ -16,7 +16,7 @@
.text
-SYM_FUNC_START(swsusp_arch_suspend)
+SYM_FUNC_START_SECT(swsusp_arch_suspend, hibernate_page)
movl %esp, saved_context_esp
movl %ebx, saved_context_ebx
movl %ebp, saved_context_ebp
@@ -35,7 +35,7 @@ SYM_FUNC_START(swsusp_arch_suspend)
ret
SYM_FUNC_END(swsusp_arch_suspend)
-SYM_CODE_START(restore_image)
+SYM_CODE_START_SECT(restore_image, hibernate_page)
/* prepare to jump to the image kernel */
movl restore_jump_address, %ebx
movl restore_cr3, %ebp
@@ -48,7 +48,7 @@ SYM_CODE_START(restore_image)
SYM_CODE_END(restore_image)
/* code below has been relocated to a safe page */
-SYM_CODE_START(core_restore_code)
+SYM_CODE_START_SECT(core_restore_code, hibernate_page)
movl temp_pgt, %eax
movl %eax, %cr3
@@ -81,8 +81,10 @@ done:
SYM_CODE_END(core_restore_code)
/* code below belongs to the image kernel */
+SYM_PUSH_SECTION(hibernate_page)
.align PAGE_SIZE
-SYM_FUNC_START(restore_registers)
+SYM_POP_SECTION()
+SYM_FUNC_START_SECT(restore_registers, hibernate_page)
/* go back to the original page tables */
movl %ebp, %cr3
movl mmu_cr4_features, %ecx
diff --git a/arch/x86/power/hibernate_asm_64.S b/arch/x86/power/hibernate_asm_64.S
index d9bed596d849..225be7a985d5 100644
--- a/arch/x86/power/hibernate_asm_64.S
+++ b/arch/x86/power/hibernate_asm_64.S
@@ -24,8 +24,10 @@
#include <asm/nospec-branch.h>
/* code below belongs to the image kernel */
+SYM_PUSH_SECTION(hibernate_page)
.align PAGE_SIZE
-SYM_FUNC_START(restore_registers)
+SYM_POP_SECTION()
+SYM_FUNC_START_SECT(restore_registers, hibernate_page)
/* go back to the original page tables */
movq %r9, %cr3
@@ -69,7 +71,7 @@ SYM_FUNC_START(restore_registers)
ret
SYM_FUNC_END(restore_registers)
-SYM_FUNC_START(swsusp_arch_suspend)
+SYM_FUNC_START_SECT(swsusp_arch_suspend, hibernate_page)
movq $saved_context, %rax
movq %rsp, pt_regs_sp(%rax)
movq %rbp, pt_regs_bp(%rax)
@@ -99,7 +101,7 @@ SYM_FUNC_START(swsusp_arch_suspend)
ret
SYM_FUNC_END(swsusp_arch_suspend)
-SYM_FUNC_START(restore_image)
+SYM_FUNC_START_SECT(restore_image, hibernate_page)
/* prepare to jump to the image kernel */
movq restore_jump_address(%rip), %r8
movq restore_cr3(%rip), %r9
@@ -118,7 +120,7 @@ SYM_FUNC_START(restore_image)
SYM_FUNC_END(restore_image)
/* code below has been relocated to a safe page */
-SYM_FUNC_START(core_restore_code)
+SYM_FUNC_START_SECT(core_restore_code, hibernate_page)
/* switch to temporary page tables */
movq %rax, %cr3
/* flush TLB */
--
2.33.1
Position-based search, which means that if we have several symbols
with the same name, we additionally need to provide an "index" of
the desired symbol, is fragile. Par exemple, it breaks when two
symbols with the same name are located in different sections.
Since a while, LD has a flag `-z unique-symbol` which appends
numeric suffixes to the functions with the same name (in symtab
and strtab).
Check for its availability and always prefer when the livepatching
is on. This needs a little adjustment to the modpost to make it
strip suffixes before adding exports.
depmod needs some treatment as well, tho its false-positibe warnings
about unknown symbols are harmless and don't alter the return code.
And there is a bunch more livepatch code to optimize-out after
introducing this, but let's leave it for later.
Suggested-by: H.J. Lu <[email protected]>
Suggested-by: Peter Zijlstra <[email protected]>
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
Makefile | 6 ++++++
init/Kconfig | 3 +++
kernel/livepatch/core.c | 20 +++++++++++++-------
scripts/mod/modpost.c | 42 ++++++++++++++++++++++-------------------
4 files changed, 45 insertions(+), 26 deletions(-)
diff --git a/Makefile b/Makefile
index d85f1ff79f5c..9dc15c67d132 100644
--- a/Makefile
+++ b/Makefile
@@ -882,6 +882,12 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
KBUILD_CFLAGS += -fno-inline-functions-called-once
endif
+# Prefer linking with the `-z unique-symbol` if available, this eliminates
+# position-based search
+ifeq ($(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)$(CONFIG_LIVEPATCH),yy)
+KBUILD_LDFLAGS += -z unique-symbol
+endif
+
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
LDFLAGS_vmlinux += --gc-sections
diff --git a/init/Kconfig b/init/Kconfig
index 4b7bac10c72d..37926d19a74a 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -86,6 +86,9 @@ config CC_HAS_ASM_INLINE
config CC_HAS_NO_PROFILE_FN_ATTR
def_bool $(success,echo '__attribute__((no_profile_instrument_function)) int x();' | $(CC) -x c - -c -o /dev/null -Werror)
+config LD_HAS_Z_UNIQUE_SYMBOL
+ def_bool $(ld-option,-z unique-symbol)
+
config CONSTRUCTORS
bool
diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index 335d988bd811..b2c787297f85 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -143,11 +143,13 @@ static int klp_find_callback(void *data, const char *name,
args->count++;
/*
- * Finish the search when the symbol is found for the desired position
- * or the position is not defined for a non-unique symbol.
+ * Finish the search when unique symbol names are enabled
+ * or the symbol is found for the desired position or the
+ * position is not defined for a non-unique symbol.
*/
- if ((args->pos && (args->count == args->pos)) ||
- (!args->pos && (args->count > 1)))
+ if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL) ||
+ (args->pos && args->count == args->pos) ||
+ (!args->pos && args->count > 1))
return 1;
return 0;
@@ -171,17 +173,21 @@ static int klp_find_object_symbol(const char *objname, const char *name,
/*
* Ensure an address was found. If sympos is 0, ensure symbol is unique;
- * otherwise ensure the symbol position count matches sympos.
+ * otherwise ensure the symbol position count matches sympos. If the LD
+ * `-z unique` flag is enabled, sympos checks are not relevant.
*/
- if (args.addr == 0)
+ if (args.addr == 0) {
pr_err("symbol '%s' not found in symbol table\n", name);
- else if (args.count > 1 && sympos == 0) {
+ } else if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)) {
+ goto out_ok;
+ } else if (args.count > 1 && sympos == 0) {
pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",
name, objname);
} else if (sympos != args.count && sympos > 0) {
pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",
sympos, name, objname ? objname : "vmlinux");
} else {
+out_ok:
*addr = args.addr;
return 0;
}
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index ccc6d35580f2..f39cc73a082c 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -689,11 +689,28 @@ static void handle_modversion(const struct module *mod,
sym_set_crc(symname, crc);
}
+static char *remove_dot(char *s)
+{
+ size_t n = strcspn(s, ".");
+
+ if (n && s[n]) {
+ size_t m = strspn(s + n + 1, "0123456789");
+
+ if (m && (s[n + m + 1] == '.' || s[n + m + 1] == 0))
+ s[n] = 0;
+
+ /* strip trailing .lto */
+ if (strends(s, ".lto"))
+ s[strlen(s) - 4] = '\0';
+ }
+
+ return s;
+}
+
static void handle_symbol(struct module *mod, struct elf_info *info,
const Elf_Sym *sym, const char *symname)
{
enum export export;
- const char *name;
if (strstarts(symname, "__ksymtab"))
export = export_from_secname(info, get_secindex(info, sym));
@@ -734,8 +751,11 @@ static void handle_symbol(struct module *mod, struct elf_info *info,
default:
/* All exported symbols */
if (strstarts(symname, "__ksymtab_")) {
- name = symname + strlen("__ksymtab_");
- sym_add_exported(name, mod, export);
+ char *name;
+
+ name = NOFAIL(strdup(symname + strlen("__ksymtab_")));
+ sym_add_exported(remove_dot(name), mod, export);
+ free(name);
}
if (strcmp(symname, "init_module") == 0)
mod->has_init = 1;
@@ -1965,22 +1985,6 @@ static void check_sec_ref(struct module *mod, const char *modname,
}
}
-static char *remove_dot(char *s)
-{
- size_t n = strcspn(s, ".");
-
- if (n && s[n]) {
- size_t m = strspn(s + n + 1, "0123456789");
- if (m && (s[n + m + 1] == '.' || s[n + m + 1] == 0))
- s[n] = 0;
-
- /* strip trailing .lto */
- if (strends(s, ".lto"))
- s[strlen(s) - 4] = '\0';
- }
- return s;
-}
-
static void read_symbols(const char *modname)
{
const char *symname;
--
2.33.1
In order to be able to sort ORC entries from both the kernel and
the pre-boot compressed environment, place ORC sorting function
into the new file arch/x86/lib/orc.c.
It can be then included directly by the pre-boot code, and
ORC_COMPRESSED_BOOT definition guards out the sort_mutex which
is unavailable and unneeded in that environment.
Placing orc_ip() into `include/asm/orc_types.h` wipes out
sorttable.h's little code dup.
Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
arch/x86/include/asm/orc_types.h | 7 +++
arch/x86/kernel/unwind_orc.c | 63 +--------------------
arch/x86/lib/Makefile | 1 +
arch/x86/lib/orc.c | 76 ++++++++++++++++++++++++++
scripts/sorttable.h | 5 --
tools/arch/x86/include/asm/orc_types.h | 7 +++
6 files changed, 92 insertions(+), 67 deletions(-)
create mode 100644 arch/x86/lib/orc.c
diff --git a/arch/x86/include/asm/orc_types.h b/arch/x86/include/asm/orc_types.h
index 5a2baf28a1dc..7708548713c4 100644
--- a/arch/x86/include/asm/orc_types.h
+++ b/arch/x86/include/asm/orc_types.h
@@ -67,6 +67,13 @@ struct orc_entry {
#endif
} __packed;
+static inline unsigned long orc_ip(const int *ip)
+{
+ return (unsigned long)ip + *ip;
+}
+
+void orc_sort(int *ip_table, struct orc_entry *orc_table, u32 num_orcs);
+
#endif /* __ASSEMBLY__ */
#endif /* _ORC_TYPES_H */
diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c
index 2de3c8c5eba9..e5748bf15966 100644
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -25,11 +25,6 @@ extern struct orc_entry __stop_orc_unwind[];
static bool orc_init __ro_after_init;
static unsigned int lookup_num_blocks __ro_after_init;
-static inline unsigned long orc_ip(const int *ip)
-{
- return (unsigned long)ip + *ip;
-}
-
static struct orc_entry *__orc_find(int *ip_table, struct orc_entry *u_table,
unsigned int num_entries, unsigned long ip)
{
@@ -188,53 +183,6 @@ static struct orc_entry *orc_find(unsigned long ip)
}
#ifdef CONFIG_MODULES
-
-static DEFINE_MUTEX(sort_mutex);
-static int *cur_orc_ip_table = __start_orc_unwind_ip;
-static struct orc_entry *cur_orc_table = __start_orc_unwind;
-
-static void orc_sort_swap(void *_a, void *_b, int size)
-{
- struct orc_entry *orc_a, *orc_b;
- struct orc_entry orc_tmp;
- int *a = _a, *b = _b, tmp;
- int delta = _b - _a;
-
- /* Swap the .orc_unwind_ip entries: */
- tmp = *a;
- *a = *b + delta;
- *b = tmp - delta;
-
- /* Swap the corresponding .orc_unwind entries: */
- orc_a = cur_orc_table + (a - cur_orc_ip_table);
- orc_b = cur_orc_table + (b - cur_orc_ip_table);
- orc_tmp = *orc_a;
- *orc_a = *orc_b;
- *orc_b = orc_tmp;
-}
-
-static int orc_sort_cmp(const void *_a, const void *_b)
-{
- struct orc_entry *orc_a;
- const int *a = _a, *b = _b;
- unsigned long a_val = orc_ip(a);
- unsigned long b_val = orc_ip(b);
-
- if (a_val > b_val)
- return 1;
- if (a_val < b_val)
- return -1;
-
- /*
- * The "weak" section terminator entries need to always be on the left
- * to ensure the lookup code skips them in favor of real entries.
- * These terminator entries exist to handle any gaps created by
- * whitelisted .o files which didn't get objtool generation.
- */
- orc_a = cur_orc_table + (a - cur_orc_ip_table);
- return orc_a->sp_reg == ORC_REG_UNDEFINED && !orc_a->end ? -1 : 1;
-}
-
void unwind_module_init(struct module *mod, void *_orc_ip, size_t orc_ip_size,
void *_orc, size_t orc_size)
{
@@ -246,16 +194,7 @@ void unwind_module_init(struct module *mod, void *_orc_ip, size_t orc_ip_size,
orc_size % sizeof(*orc) != 0 ||
num_entries != orc_size / sizeof(*orc));
- /*
- * The 'cur_orc_*' globals allow the orc_sort_swap() callback to
- * associate an .orc_unwind_ip table entry with its corresponding
- * .orc_unwind entry so they can both be swapped.
- */
- mutex_lock(&sort_mutex);
- cur_orc_ip_table = orc_ip;
- cur_orc_table = orc;
- sort(orc_ip, num_entries, sizeof(int), orc_sort_cmp, orc_sort_swap);
- mutex_unlock(&sort_mutex);
+ orc_sort(orc_ip, orc, num_entries);
mod->arch.orc_unwind_ip = orc_ip;
mod->arch.orc_unwind = orc;
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index c6506c6a7092..4335518adcaf 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -50,6 +50,7 @@ lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o insn-eval.o
lib-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
lib-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
lib-$(CONFIG_RETPOLINE) += retpoline.o
+lib-$(CONFIG_UNWINDER_ORC) += orc.o
obj-y += msr.o msr-reg.o msr-reg-export.o hweight.o
obj-y += iomem.o
diff --git a/arch/x86/lib/orc.c b/arch/x86/lib/orc.c
new file mode 100644
index 000000000000..5c37494bbbb5
--- /dev/null
+++ b/arch/x86/lib/orc.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ORC sorting shared by the compressed boot code and ORC module
+ * support.
+ */
+
+#include <asm/orc_types.h>
+#include <linux/mutex.h>
+#include <linux/sort.h>
+
+#ifndef ORC_COMPRESSED_BOOT
+static DEFINE_MUTEX(sort_mutex);
+
+#define sort_mutex_lock() mutex_lock(&sort_mutex)
+#define sort_mutex_unlock() mutex_unlock(&sort_mutex)
+#else /* ORC_COMPRESSED_BOOT */
+#define sort_mutex_lock()
+#define sort_mutex_unlock()
+#endif /* ORC_COMPRESSED_BOOT */
+
+static int *cur_orc_ip_table;
+static struct orc_entry *cur_orc_table;
+
+static void orc_sort_swap(void *_a, void *_b, int size)
+{
+ struct orc_entry *orc_a, *orc_b;
+ int *a = _a, *b = _b, tmp;
+ int delta = _b - _a;
+
+ /* Swap the .orc_unwind_ip entries: */
+ tmp = *a;
+ *a = *b + delta;
+ *b = tmp - delta;
+
+ /* Swap the corresponding .orc_unwind entries: */
+ orc_a = cur_orc_table + (a - cur_orc_ip_table);
+ orc_b = cur_orc_table + (b - cur_orc_ip_table);
+ swap(*orc_a, *orc_b);
+}
+
+static int orc_sort_cmp(const void *_a, const void *_b)
+{
+ const int *a = _a, *b = _b;
+ unsigned long a_val = orc_ip(a);
+ unsigned long b_val = orc_ip(b);
+ struct orc_entry *orc_a;
+
+ if (a_val > b_val)
+ return 1;
+ if (a_val < b_val)
+ return -1;
+
+ /*
+ * The "weak" section terminator entries need to always be on the left
+ * to ensure the lookup code skips them in favor of real entries.
+ * These terminator entries exist to handle any gaps created by
+ * whitelisted .o files which didn't get objtool generation.
+ */
+ orc_a = cur_orc_table + (a - cur_orc_ip_table);
+ return orc_a->sp_reg == ORC_REG_UNDEFINED && !orc_a->end ? -1 : 1;
+}
+
+void orc_sort(int *ip_table, struct orc_entry *orc_table, u32 num_orcs)
+{
+ /*
+ * The 'cur_orc_*' globals allow the orc_sort_swap() callback to
+ * associate an .orc_unwind_ip table entry with its corresponding
+ * .orc_unwind entry so they can both be swapped.
+ */
+ sort_mutex_lock();
+ cur_orc_ip_table = ip_table;
+ cur_orc_table = orc_table;
+ sort(ip_table, num_orcs, sizeof(int), orc_sort_cmp,
+ orc_sort_swap);
+ sort_mutex_unlock();
+}
diff --git a/scripts/sorttable.h b/scripts/sorttable.h
index a2baa2fefb13..44f8d7d654ff 100644
--- a/scripts/sorttable.h
+++ b/scripts/sorttable.h
@@ -96,11 +96,6 @@ struct orc_entry *g_orc_table;
pthread_t orc_sort_thread;
-static inline unsigned long orc_ip(const int *ip)
-{
- return (unsigned long)ip + *ip;
-}
-
static int orc_sort_cmp(const void *_a, const void *_b)
{
struct orc_entry *orc_a;
diff --git a/tools/arch/x86/include/asm/orc_types.h b/tools/arch/x86/include/asm/orc_types.h
index 5a2baf28a1dc..7708548713c4 100644
--- a/tools/arch/x86/include/asm/orc_types.h
+++ b/tools/arch/x86/include/asm/orc_types.h
@@ -67,6 +67,13 @@ struct orc_entry {
#endif
} __packed;
+static inline unsigned long orc_ip(const int *ip)
+{
+ return (unsigned long)ip + *ip;
+}
+
+void orc_sort(int *ip_table, struct orc_entry *orc_table, u32 num_orcs);
+
#endif /* __ASSEMBLY__ */
#endif /* _ORC_TYPES_H */
--
2.33.1
From: Kristen Carlson Accardi <[email protected]>
When reordering functions, the relative offsets for relocs that
are either in the randomized sections, or refer to the randomized
sections will need to be adjusted. Add code to detect whether a
reloc satisfies these cases, and if so, add them to the appropriate
reloc list.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Tested-by: Tony Luck <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
[ alobakin: don't split relocs' usage string across lines ]
Signed-off-by: Alexander Lobakin <[email protected]>
---
arch/x86/boot/compressed/Makefile | 7 ++++++-
arch/x86/tools/relocs.c | 32 +++++++++++++++++++++++++++----
arch/x86/tools/relocs.h | 4 ++--
arch/x86/tools/relocs_common.c | 14 +++++++++-----
4 files changed, 45 insertions(+), 12 deletions(-)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 4bf32db56010..2cf809f5c642 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -107,6 +107,11 @@ $(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE
$(call if_changed,ld)
OBJCOPYFLAGS_vmlinux.bin := -R .comment -S
+
+ifdef CONFIG_FG_KASLR
+RELOCS_ARGS += --fg-kaslr
+endif
+
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
@@ -114,7 +119,7 @@ targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relo
CMD_RELOCS = arch/x86/tools/relocs
quiet_cmd_relocs = RELOCS $@
- cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $<
+ cmd_relocs = $(CMD_RELOCS) $(RELOCS_ARGS) $< > $@;$(CMD_RELOCS) $(RELOCS_ARGS) --abs-relocs $<
$(obj)/vmlinux.relocs: vmlinux FORCE
$(call if_changed,relocs)
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index c736cf2ac76b..8aa1f39be561 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -45,6 +45,8 @@ struct section {
};
static struct section *secs;
+static int fgkaslr_mode;
+
static const char * const sym_regex_kernel[S_NSYMTYPES] = {
/*
* Following symbols have been audited. There values are constant and do
@@ -823,6 +825,24 @@ static int is_percpu_sym(ElfW(Sym) *sym, const char *symname)
strncmp(symname, "init_per_cpu_", 13);
}
+static int is_function_section(struct section *sec)
+{
+ if (!fgkaslr_mode)
+ return 0;
+
+ return !strncmp(sec_name(sec->shdr.sh_info), ".text.", 6);
+}
+
+static int is_randomized_sym(ElfW(Sym) *sym)
+{
+ if (!fgkaslr_mode)
+ return 0;
+
+ if (sym->st_shndx > shnum)
+ return 0;
+
+ return !strncmp(sec_name(sym_index(sym)), ".text.", 6);
+}
static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
const char *symname)
@@ -848,12 +868,15 @@ static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
case R_X86_64_PC32:
case R_X86_64_PLT32:
/*
- * PC relative relocations don't need to be adjusted unless
- * referencing a percpu symbol.
+ * we need to keep pc relative relocations for sections which
+ * might be randomized, and for the percpu section.
+ * We also need to keep relocations for any offset which might
+ * reference an address in a section which has been randomized.
*
* NB: R_X86_64_PLT32 can be treated as R_X86_64_PC32.
*/
- if (is_percpu_sym(sym, symname))
+ if (is_function_section(sec) || is_randomized_sym(sym) ||
+ is_percpu_sym(sym, symname))
add_reloc(&relocs32neg, offset);
break;
@@ -1168,8 +1191,9 @@ static void print_reloc_info(void)
void process(FILE *fp, int use_real_mode, int as_text,
int show_absolute_syms, int show_absolute_relocs,
- int show_reloc_info)
+ int show_reloc_info, int fgkaslr)
{
+ fgkaslr_mode = fgkaslr;
regex_init(use_real_mode);
read_ehdr(fp);
read_shdrs(fp);
diff --git a/arch/x86/tools/relocs.h b/arch/x86/tools/relocs.h
index 4c49c82446eb..269db511b243 100644
--- a/arch/x86/tools/relocs.h
+++ b/arch/x86/tools/relocs.h
@@ -32,8 +32,8 @@ enum symtype {
void process_32(FILE *fp, int use_real_mode, int as_text,
int show_absolute_syms, int show_absolute_relocs,
- int show_reloc_info);
+ int show_reloc_info, int fgkaslr);
void process_64(FILE *fp, int use_real_mode, int as_text,
int show_absolute_syms, int show_absolute_relocs,
- int show_reloc_info);
+ int show_reloc_info, int fgkaslr);
#endif /* RELOCS_H */
diff --git a/arch/x86/tools/relocs_common.c b/arch/x86/tools/relocs_common.c
index 6634352a20bc..d6acda36575a 100644
--- a/arch/x86/tools/relocs_common.c
+++ b/arch/x86/tools/relocs_common.c
@@ -12,14 +12,13 @@ void die(char *fmt, ...)
static void usage(void)
{
- die("relocs [--abs-syms|--abs-relocs|--reloc-info|--text|--realmode]" \
- " vmlinux\n");
+ die("relocs [--abs-syms|--abs-relocs|--reloc-info|--text|--realmode|--fg-kaslr] vmlinux\n");
}
int main(int argc, char **argv)
{
int show_absolute_syms, show_absolute_relocs, show_reloc_info;
- int as_text, use_real_mode;
+ int as_text, use_real_mode, fgkaslr_opt;
const char *fname;
FILE *fp;
int i;
@@ -30,6 +29,7 @@ int main(int argc, char **argv)
show_reloc_info = 0;
as_text = 0;
use_real_mode = 0;
+ fgkaslr_opt = 0;
fname = NULL;
for (i = 1; i < argc; i++) {
char *arg = argv[i];
@@ -54,6 +54,10 @@ int main(int argc, char **argv)
use_real_mode = 1;
continue;
}
+ if (strcmp(arg, "--fg-kaslr") == 0) {
+ fgkaslr_opt = 1;
+ continue;
+ }
}
else if (!fname) {
fname = arg;
@@ -75,11 +79,11 @@ int main(int argc, char **argv)
if (e_ident[EI_CLASS] == ELFCLASS64)
process_64(fp, use_real_mode, as_text,
show_absolute_syms, show_absolute_relocs,
- show_reloc_info);
+ show_reloc_info, fgkaslr_opt);
else
process_32(fp, use_real_mode, as_text,
show_absolute_syms, show_absolute_relocs,
- show_reloc_info);
+ show_reloc_info, fgkaslr_opt);
fclose(fp);
return 0;
}
--
2.33.1
From: Kristen Carlson Accardi <[email protected]>
Allow user to select CONFIG_FG_KASLR if dependencies are met. Change
the make file to build with -ffunction-sections if CONFIG_FG_KASLR.
While the only architecture that supports CONFIG_FG_KASLR does not
currently enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION, make sure these
2 features play nicely together for the future by ensuring that if
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is selected when used with
CONFIG_FG_KASLR the function sections will not be consolidated back
into .text. Thanks to Kees Cook for the dead code elimination changes.
alobakin:
Improve cflags management in the top Makefile: don't turn on
-f{data,function}-sections with ClangLTO as this is a no-op
provoking a full rebuild.
Add ".symtab_shndx" to the list of known sections since we are going
to support it. Otherwise LD will emit a warning when there are more
than 64k sections and CONFIG_LD_ORPHAN_WARN=y.
Turn ".text" LD script wildcard into ".text.__unused__" to make sure
all kernel code will land into our special sections.
Make FG-KASLR depend on `-z unique-symbol`. With every function being
in a separate section (randomly ordered each boot), position-based
search is impossible. This flag is likely to be widely available.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Tony Luck <[email protected]>
Co-developed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
Makefile | 17 ++++++++++++++---
arch/Kconfig | 6 +++++-
include/asm-generic/vmlinux.lds.h | 20 ++++++++++++++++++--
include/linux/linkage.h | 3 ++-
init/Kconfig | 18 ++++++++++++++++--
5 files changed, 55 insertions(+), 9 deletions(-)
diff --git a/Makefile b/Makefile
index b921b1fabf70..3346269341d4 100644
--- a/Makefile
+++ b/Makefile
@@ -883,7 +883,7 @@ KBUILD_CFLAGS += -fno-inline-functions-called-once
endif
# Prefer linking with the `-z unique-symbol` if available, this eliminates
-# position-based search
+# position-based search. Also is a requirement for FG-KASLR
ifeq ($(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)$(CONFIG_LIVEPATCH),yy)
KBUILD_LDFLAGS += -z unique-symbol
endif
@@ -892,7 +892,7 @@ endif
# `include/linux/linkage.h` for explanation. This flag is to enable GAS to
# insert the name of the previous section instead of `%S` inside .pushsection
ifdef CONFIG_HAVE_ASM_FUNCTION_SECTIONS
-ifneq ($(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION)$(CONFIG_LTO_CLANG),)
+ifneq ($(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION)$(CONFIG_LTO_CLANG)$(CONFIG_FG_KASLR),)
SECSUBST_AFLAGS := -Wa,--sectname-subst
KBUILD_AFLAGS_KERNEL += $(SECSUBST_AFLAGS)
KBUILD_CFLAGS_KERNEL += $(SECSUBST_AFLAGS)
@@ -906,8 +906,19 @@ KBUILD_CFLAGS_MODULE += -Wa,--sectname-subst
endif
endif # CONFIG_HAVE_ASM_FUNCTION_SECTIONS
+# ClangLTO implies `-ffunction-sections -fdata-sections`, no need
+# to specify them manually and trigger a pointless full rebuild
+ifndef CONFIG_LTO_CLANG
+ifneq ($(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION)$(CONFIG_FG_KASLR),)
+KBUILD_CFLAGS_KERNEL += -ffunction-sections
+endif
+
+ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+KBUILD_CFLAGS_KERNEL += -fdata-sections
+endif
+endif # CONFIG_LTO_CLANG
+
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
-KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
LDFLAGS_vmlinux += --gc-sections
endif
diff --git a/arch/Kconfig b/arch/Kconfig
index b31a836bc252..01c026d090d4 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1316,7 +1316,11 @@ config ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS
bool
help
An arch should select this if it can be built and run with its
- ASM functions placed into separate sections to improve DCE and LTO.
+ ASM functions placed into separate sections to improve DCE, LTO
+ and FG-KASLR.
+
+config ARCH_SUPPORTS_FG_KASLR
+ bool
source "kernel/gcov/Kconfig"
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index e7b8a84e0e64..586465b2abb2 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -100,14 +100,12 @@
* sections to be brought in with rodata.
*/
#if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
-#define TEXT_MAIN SECT_WILDCARD(.text)
#define DATA_MAIN SECT_WILDCARD(.data) .data..L* .data..compoundliteral* .data.$__unnamed_* .data.$L*
#define SDATA_MAIN SECT_WILDCARD(.sdata)
#define RODATA_MAIN SECT_WILDCARD(.rodata) .rodata..L*
#define BSS_MAIN SECT_WILDCARD(.bss) .bss..compoundliteral*
#define SBSS_MAIN SECT_WILDCARD(.sbss)
#else
-#define TEXT_MAIN .text
#define DATA_MAIN .data
#define SDATA_MAIN .sdata
#define RODATA_MAIN .rodata
@@ -115,6 +113,23 @@
#define SBSS_MAIN .sbss
#endif
+/*
+ * LTO_CLANG, LD_DEAD_CODE_DATA_ELIMINATION and FG_KASLR options enable
+ * -ffunction-sections, which produces separately named .text sections. In
+ * the case of CONFIG_FG_KASLR, they need to stay distict so they can be
+ * separately randomized. Without CONFIG_FG_KASLR, the separate .text
+ * sections can be collected back into a common section, which makes the
+ * resulting image slightly smaller
+ */
+#if (defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || \
+ defined(CONFIG_LTO_CLANG)) && !defined(CONFIG_FG_KASLR)
+#define TEXT_MAIN SECT_WILDCARD(.text)
+#elif defined(CONFIG_FG_KASLR)
+#define TEXT_MAIN .text.__unused__
+#else
+#define TEXT_MAIN .text
+#endif
+
/*
* GCC 4.5 and later have a 32 bytes section alignment for structures.
* Except GCC 4.9, that feels the need to align on 64 bytes.
@@ -843,6 +858,7 @@
#define ELF_DETAILS \
.comment 0 : { *(.comment) } \
.symtab 0 : { *(.symtab) } \
+ .symtab_shndx 0 : { *(.symtab_shndx) } \
.strtab 0 : { *(.strtab) } \
.shstrtab 0 : { *(.shstrtab) }
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 0c0ddf4429dc..f3c96fb6a534 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -75,10 +75,11 @@
/*
* Allow ASM symbols to have their own unique sections if they are being
- * generated by the compiler for C functions (DCE, LTO).
+ * generated by the compiler for C functions (DCE, FG-KASLR, LTO).
*/
#if defined(CONFIG_HAVE_ASM_FUNCTION_SECTIONS) && \
((defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) && !defined(MODULE)) || \
+ (defined(CONFIG_FG_KASLR) && !defined(MODULE)) || \
(defined(CONFIG_LTO_CLANG)))
#define SYM_PUSH_SECTION(name) \
diff --git a/init/Kconfig b/init/Kconfig
index 3babc0aeac61..a74b3c3acb49 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1394,8 +1394,8 @@ config HAVE_ASM_FUNCTION_SECTIONS
This enables ASM function sections if both architecture
and toolchain supports that. It allows creating a separate
.text section for each ASM function in order to improve
- DCE and LTO (works the same way as -ffunction-sections for
- C code).
+ DCE, LTO and FG-KASLR (works the same way as -ffunction-sections
+ for C code).
config HAVE_LD_DEAD_CODE_DATA_ELIMINATION
bool
@@ -2065,6 +2065,20 @@ config PROFILING
config TRACEPOINTS
bool
+config FG_KASLR
+ bool "Function Granular Kernel Address Space Layout Randomization"
+ depends on ARCH_SUPPORTS_FG_KASLR
+ depends on $(cc-option,-ffunction-sections)
+ depends on LD_HAS_Z_UNIQUE_SYMBOL || !LIVEPATCH
+ help
+ This option improves the randomness of the kernel text
+ over basic Kernel Address Space Layout Randomization (KASLR)
+ by reordering the kernel text at boot time. This feature
+ uses information generated at compile time to re-layout the
+ kernel text section at boot time at function level granularity.
+
+ If unsure, say N.
+
endmenu # General setup
source "arch/Kconfig"
--
2.33.1
From: Kristen Carlson Accardi <[email protected]>
This commit contains the changes required to re-layout the kernel text
sections generated by -ffunction-sections shortly after decompression.
Documentation of the feature is also added.
After decompression, the decompressed image's elf headers are parsed.
In order to manually update certain data structures that are built with
relative offsets during the kernel build process, certain symbols are
not stripped by objdump and their location is retained in the elf symbol
tables. These addresses are saved.
If the image was built with -ffunction-sections, there will be ELF section
headers present which contain information about the address range of each
section. Anything that is not broken out into function sections (i.e. is
consolidated into .text) is left in it's original location, but any other
executable section which begins with ".text." is located and shuffled
randomly within the remaining text segment address range.
After the sections have been copied to their new locations, but before
relocations have been applied, the kallsyms tables must be updated to
reflect the new symbol locations. Because it is expected that these tables
will be sorted by address, the kallsyms tables will need to be sorted
after the update.
When applying relocations, the address of the relocation needs to be
adjusted by the offset from the original location of the section that was
randomized to it's new location. In addition, if a value at that relocation
was a location in the text segment that was randomized, it's value will be
adjusted to a new location.
After relocations have been applied, the exception table must be updated
with new symbol locations, and then re-sorted by the new address. The
orc table will have been updated as part of applying relocations, but since
it is expected to be sorted by address, it will need to be resorted.
alobakin:
Handle .altinstr_replacement relocations. Add vmlinux symbols to be
able to determine if a code location belongs to them, and treat this
code as text.
Use the new "gen-symbols.h" header file to ad hoc create a list of
symbols needed for both objcopy (as plain text) and C source
(fgkaslr.c, twice). With this approach, it's easier to add new
sections if needed.
Make use of our "arch/x86/lib/orc.c" introduced a bunch commits
earlier to sort ORC entries at pre-boot time -- include it directly,
similarly to extable.c et al.
Finally, use the new shuffle_array() macro landed in the kallsyms
commit to randomize our section list.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Tested-by: Tony Luck <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reported-by: kernel test robot <[email protected]> # #if -> #ifdef
Suggested-by: Peter Zijlstra <[email protected]> # gen-symbols, ORC, ...
Co-developed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
arch/x86/boot/compressed/.gitignore | 1 +
arch/x86/boot/compressed/Makefile | 15 +-
arch/x86/boot/compressed/fgkaslr.c | 755 +++++++++++++++++++++++++
arch/x86/boot/compressed/gen-symbols.h | 30 +
arch/x86/boot/compressed/misc.c | 153 ++++-
arch/x86/boot/compressed/misc.h | 28 +
arch/x86/boot/compressed/utils.c | 13 +
arch/x86/include/asm/boot.h | 13 +-
arch/x86/kernel/vmlinux.lds.S | 2 +
include/uapi/linux/elf.h | 1 +
10 files changed, 982 insertions(+), 29 deletions(-)
create mode 100644 arch/x86/boot/compressed/fgkaslr.c
create mode 100644 arch/x86/boot/compressed/gen-symbols.h
create mode 100644 arch/x86/boot/compressed/utils.c
diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore
index 25805199a506..bc5f8436be1d 100644
--- a/arch/x86/boot/compressed/.gitignore
+++ b/arch/x86/boot/compressed/.gitignore
@@ -3,5 +3,6 @@ relocs
vmlinux.bin.all
vmlinux.relocs
vmlinux.lds
+vmlinux.symbols
mkpiggy
piggy.S
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 2cf809f5c642..6f8dcbbbad80 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -90,6 +90,7 @@ vmlinux-objs-y := $(obj)/vmlinux.lds $(obj)/kernel_info.o $(obj)/head_$(BITS).o
vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o
vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o
+vmlinux-objs-$(CONFIG_FG_KASLR) += $(obj)/fgkaslr.o $(obj)/utils.o
ifdef CONFIG_X86_64
vmlinux-objs-y += $(obj)/ident_map_64.o
vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o
@@ -108,11 +109,21 @@ $(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE
OBJCOPYFLAGS_vmlinux.bin := -R .comment -S
+targets += vmlinux.symbols
+
ifdef CONFIG_FG_KASLR
+quiet_cmd_vmlinux_symbols = GEN $@
+ cmd_vmlinux_symbols = $(CPP) $(cpp_flags) -P -D"GEN(s)"=s -o $@ $<
+
+VMLINUX_SYMBOLS = $(obj)/vmlinux.symbols
+$(VMLINUX_SYMBOLS): $(src)/gen-symbols.h FORCE
+ $(call if_changed_dep,vmlinux_symbols)
+
+OBJCOPYFLAGS += --keep-symbols=$(VMLINUX_SYMBOLS)
RELOCS_ARGS += --fg-kaslr
-endif
+endif # CONFIG_FG_KASLR
-$(obj)/vmlinux.bin: vmlinux FORCE
+$(obj)/vmlinux.bin: vmlinux $(VMLINUX_SYMBOLS) FORCE
$(call if_changed,objcopy)
targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relocs
diff --git a/arch/x86/boot/compressed/fgkaslr.c b/arch/x86/boot/compressed/fgkaslr.c
new file mode 100644
index 000000000000..91b3b6ea3a93
--- /dev/null
+++ b/arch/x86/boot/compressed/fgkaslr.c
@@ -0,0 +1,755 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This contains the routines needed to reorder the kernel text section
+ * at boot time.
+ *
+ * Copyright (C) 2020-2021, Intel Corporation.
+ * Author: Kristen Carlson Accardi <[email protected]>
+ */
+
+#include "misc.h"
+#include "error.h"
+#include "pgtable.h"
+#include "../string.h"
+#include "../voffset.h"
+#include <linux/sort.h>
+#include <linux/random.h>
+#include <linux/bsearch.h>
+#include "../../include/asm/extable.h"
+#include "../../include/asm/orc_types.h"
+
+/*
+ * Use normal definitions of mem*() from string.c. There are already
+ * included header files which expect a definition of memset() and by
+ * the time we define memset macro, it is too late.
+ */
+#undef memcpy
+#undef memset
+#define memmove memmove
+
+void *memmove(void *dest, const void *src, size_t n);
+
+static int nofgkaslr;
+
+static unsigned long percpu_start;
+static unsigned long percpu_end;
+
+#define GEN(s) static long addr_##s;
+#include "gen-symbols.h"
+#undef GEN
+
+/* addresses in mapped address space */
+static int *base;
+static u8 *names;
+static unsigned long relative_base;
+static unsigned int *markers_addr;
+
+struct kallsyms_name {
+ u8 len;
+ u8 indecis[256];
+};
+
+static struct kallsyms_name *names_table;
+
+/* Array of pointers to sections headers for randomized sections */
+static Elf_Shdr **sections;
+
+/* Number of elements in the randomized section header array (sections) */
+static int sections_size;
+
+/* Array of all section headers, randomized or otherwise */
+static Elf_Shdr *sechdrs;
+
+static bool is_orc_unwind(long addr)
+{
+ if (addr >= addr___start_orc_unwind_ip &&
+ addr < addr___stop_orc_unwind_ip)
+ return true;
+ return false;
+}
+
+static bool is_text(long addr)
+{
+ if ((addr >= addr__stext && addr < addr__etext) ||
+ (addr >= addr__sinittext && addr < addr__einittext) ||
+ (addr >= addr___altinstr_replacement &&
+ addr < addr___altinstr_replacement_end))
+ return true;
+ return false;
+}
+
+bool is_percpu_addr(long pc, long offset)
+{
+ unsigned long ptr;
+ long address;
+
+ address = pc + offset + 4;
+
+ ptr = (unsigned long)address;
+
+ if (ptr >= percpu_start && ptr < percpu_end)
+ return true;
+
+ return false;
+}
+
+static bool cur_addr_orc;
+
+static int cmp_section_addr(const void *a, const void *b)
+{
+ const Elf_Shdr *s = *(const Elf_Shdr **)b;
+ unsigned long end = s->sh_addr + s->sh_size;
+ unsigned long ptr = (unsigned long)a;
+
+ if (cur_addr_orc)
+ /* orc relocations can be one past the end of the section */
+ end++;
+
+ if (ptr >= s->sh_addr && ptr < end)
+ return 0;
+
+ if (ptr < s->sh_addr)
+ return -1;
+
+ return 1;
+}
+
+/*
+ * Discover if the address is in a randomized section and if so,
+ * adjust by the saved offset.
+ */
+Elf_Shdr *adjust_address(long *address)
+{
+ Elf_Shdr **s, *shdr;
+
+ if (nofgkaslr)
+ return NULL;
+
+ s = bsearch((const void *)*address, sections, sections_size,
+ sizeof(*s), cmp_section_addr);
+ if (!s)
+ return NULL;
+
+ shdr = *s;
+ *address += shdr->sh_offset;
+
+ return shdr;
+}
+
+void adjust_relative_offset(long pc, long *value, Elf_Shdr *section)
+{
+ long address;
+ Elf_Shdr *s;
+
+ if (nofgkaslr)
+ return;
+
+ /*
+ * sometimes we are updating a relative offset that would
+ * normally be relative to the next instruction (such as a call).
+ * In this case to calculate the target, you need to add 32bits to
+ * the pc to get the next instruction value. However, sometimes
+ * targets are just data that was stored in a table such as ksymtab
+ * or cpu alternatives. In this case our target is not relative to
+ * the next instruction.
+ */
+
+ /* Calculate the address that this offset would call. */
+ if (!is_text(pc))
+ address = pc + *value;
+ else
+ address = pc + *value + 4;
+
+ /*
+ * orc ip addresses are sorted at build time after relocs have
+ * been applied, making the relocs no longer valid. Skip any
+ * relocs for the orc_unwind_ip table. These will be updated
+ * separately.
+ */
+ if (is_orc_unwind(pc))
+ return;
+
+ s = adjust_address(&address);
+
+ /*
+ * if the address is in section that was randomized,
+ * we need to adjust the offset.
+ */
+ if (s)
+ *value += s->sh_offset;
+
+ /*
+ * If the PC that this offset was calculated for was in a section
+ * that has been randomized, the value needs to be adjusted by the
+ * same amount as the randomized section was adjusted from it's original
+ * location.
+ */
+ if (section)
+ *value -= section->sh_offset;
+}
+
+static void kallsyms_swp(void *a, void *b, int size)
+{
+ struct kallsyms_name name_a;
+ int idx1, idx2;
+
+ /* Determine our index into the array. */
+ idx1 = (const int *)a - base;
+ idx2 = (const int *)b - base;
+ swap(base[idx1], base[idx2]);
+
+ /* Swap the names table. */
+ memcpy(&name_a, &names_table[idx1], sizeof(name_a));
+ memcpy(&names_table[idx1], &names_table[idx2],
+ sizeof(struct kallsyms_name));
+ memcpy(&names_table[idx2], &name_a, sizeof(struct kallsyms_name));
+}
+
+static int kallsyms_cmp(const void *a, const void *b)
+{
+ unsigned long uaddr_a, uaddr_b;
+ int addr_a, addr_b;
+
+ addr_a = *(const int *)a;
+ addr_b = *(const int *)b;
+
+ if (addr_a >= 0)
+ uaddr_a = addr_a;
+ if (addr_b >= 0)
+ uaddr_b = addr_b;
+
+ if (addr_a < 0)
+ uaddr_a = relative_base - 1 - addr_a;
+ if (addr_b < 0)
+ uaddr_b = relative_base - 1 - addr_b;
+
+ if (uaddr_b > uaddr_a)
+ return -1;
+
+ return 0;
+}
+
+static void deal_with_names(int num_syms)
+{
+ int num_bytes;
+ int offset;
+ int i, j;
+
+ /* we should have num_syms kallsyms_name entries */
+ num_bytes = num_syms * sizeof(*names_table);
+ names_table = malloc(num_syms * sizeof(*names_table));
+ if (!names_table) {
+ debug_putstr("\nbytes requested: ");
+ debug_puthex(num_bytes);
+ error("\nunable to allocate space for names table\n");
+ }
+
+ /* read all the names entries */
+ offset = 0;
+ for (i = 0; i < num_syms; i++) {
+ names_table[i].len = names[offset];
+ offset++;
+ for (j = 0; j < names_table[i].len; j++) {
+ names_table[i].indecis[j] = names[offset];
+ offset++;
+ }
+ }
+}
+
+static void write_sorted_names(int num_syms)
+{
+ unsigned int *markers;
+ int offset = 0;
+ int i, j;
+
+ /*
+ * we are going to need to regenerate the markers table, which is a
+ * table of offsets into the compressed stream every 256 symbols.
+ * this code copied almost directly from scripts/kallsyms.c
+ */
+ markers = malloc(sizeof(unsigned int) * ((num_syms + 255) / 256));
+ if (!markers) {
+ debug_putstr("\nfailed to allocate heap space of ");
+ debug_puthex(((num_syms + 255) / 256));
+ debug_putstr(" bytes\n");
+ error("Unable to allocate space for markers table");
+ }
+
+ for (i = 0; i < num_syms; i++) {
+ if ((i & 0xFF) == 0)
+ markers[i >> 8] = offset;
+
+ names[offset] = (u8)names_table[i].len;
+ offset++;
+ for (j = 0; j < names_table[i].len; j++) {
+ names[offset] = (u8)names_table[i].indecis[j];
+ offset++;
+ }
+ }
+
+ /* write new markers table over old one */
+ for (i = 0; i < ((num_syms + 255) >> 8); i++)
+ markers_addr[i] = markers[i];
+
+ free(markers);
+ free(names_table);
+}
+
+static void sort_kallsyms(unsigned long map)
+{
+ int num_syms;
+ int i;
+
+ debug_putstr("\nRe-sorting kallsyms...\n");
+
+ num_syms = *(int *)(addr_kallsyms_num_syms + map);
+ base = (int *)(addr_kallsyms_offsets + map);
+ relative_base = *(unsigned long *)(addr_kallsyms_relative_base + map);
+ markers_addr = (unsigned int *)(addr_kallsyms_markers + map);
+ names = (u8 *)(addr_kallsyms_names + map);
+
+ /*
+ * the kallsyms table was generated prior to any randomization.
+ * it is a bunch of offsets from "relative base". In order for
+ * us to check if a symbol has an address that was in a randomized
+ * section, we need to reconstruct the address to it's original
+ * value prior to handle_relocations.
+ */
+ for (i = 0; i < num_syms; i++) {
+ unsigned long addr;
+
+ /*
+ * according to kernel/kallsyms.c, positive offsets are absolute
+ * values and negative offsets are relative to the base.
+ */
+ if (base[i] >= 0)
+ addr = base[i];
+ else
+ addr = relative_base - 1 - base[i];
+
+ if (adjust_address(&addr))
+ /* here we need to recalcuate the offset */
+ base[i] = relative_base - 1 - addr;
+ }
+
+ /*
+ * here we need to read in all the kallsyms_names info
+ * so that we can regenerate it.
+ */
+ deal_with_names(num_syms);
+
+ sort(base, num_syms, sizeof(int), kallsyms_cmp, kallsyms_swp);
+
+ /* write the newly sorted names table over the old one */
+ write_sorted_names(num_syms);
+}
+
+/*
+ * We need to include this file here rather than in utils.c because
+ * some of the helper functions in extable.c are used to update
+ * the extable below and are defined as "static" in extable.c
+ */
+#include "../../../../lib/extable.c"
+
+static inline unsigned long
+ex_fixup_addr(const struct exception_table_entry *x)
+{
+ return ((unsigned long)&x->fixup + x->fixup);
+}
+
+static void update_ex_table(unsigned long map)
+{
+ struct exception_table_entry *start_ex_table =
+ (struct exception_table_entry *)(addr___start___ex_table + map);
+ int num_entries =
+ (addr___stop___ex_table - addr___start___ex_table) /
+ sizeof(struct exception_table_entry);
+ int i;
+
+ debug_putstr("\nUpdating exception table...");
+ for (i = 0; i < num_entries; i++) {
+ unsigned long fixup = ex_fixup_addr(&start_ex_table[i]);
+ unsigned long insn = ex_to_insn(&start_ex_table[i]);
+ unsigned long addr;
+ Elf_Shdr *s;
+
+ /* check each address to see if it needs adjusting */
+ addr = insn - map;
+ s = adjust_address(&addr);
+ if (s)
+ start_ex_table[i].insn += s->sh_offset;
+
+ addr = fixup - map;
+ s = adjust_address(&addr);
+ if (s)
+ start_ex_table[i].fixup += s->sh_offset;
+ }
+}
+
+static void sort_ex_table(unsigned long map)
+{
+ struct exception_table_entry *start_ex_table =
+ (struct exception_table_entry *)(addr___start___ex_table + map);
+ struct exception_table_entry *stop_ex_table =
+ (struct exception_table_entry *)(addr___stop___ex_table + map);
+
+ debug_putstr("\nRe-sorting exception table...");
+
+ sort_extable(start_ex_table, stop_ex_table);
+}
+
+#define ORC_COMPRESSED_BOOT
+#include "../../lib/orc.c"
+
+static void update_orc_table(unsigned long map)
+{
+ int *ip_table = (int *)(addr___start_orc_unwind_ip + map);
+ int num_entries, i;
+
+ num_entries = addr___stop_orc_unwind_ip - addr___start_orc_unwind_ip;
+ num_entries /= sizeof(int);
+
+ debug_putstr("\nUpdating orc tables...\n");
+ cur_addr_orc = true;
+
+ for (i = 0; i < num_entries; i++) {
+ unsigned long ip = orc_ip(ip_table + i);
+ Elf_Shdr *s;
+
+ /* check each address to see if it needs adjusting */
+ ip = ip - map;
+
+ /*
+ * objtool places terminator entries just outside the end of
+ * the section. To identify an orc_unwind_ip address that might
+ * need adjusting, the address should be compared differently
+ * than a normal address.
+ */
+ s = adjust_address(&ip);
+ if (s)
+ ip_table[i] += s->sh_offset;
+ }
+
+ cur_addr_orc = false;
+}
+
+static void sort_orc_table(unsigned long map)
+{
+ struct orc_entry *orc_table;
+ int num_entries;
+ int *ip_table;
+
+ orc_table = (struct orc_entry *)(addr___start_orc_unwind + map);
+ ip_table = (int *)(addr___start_orc_unwind_ip + map);
+
+ num_entries = addr___stop_orc_unwind_ip - addr___start_orc_unwind_ip;
+ num_entries /= sizeof(int);
+
+ debug_putstr("\nRe-sorting orc tables...\n");
+ orc_sort(ip_table, orc_table, num_entries);
+}
+
+void post_relocations_cleanup(unsigned long map)
+{
+ if (!nofgkaslr) {
+ update_ex_table(map);
+ sort_ex_table(map);
+ update_orc_table(map);
+ sort_orc_table(map);
+ }
+
+ /*
+ * maybe one day free will do something. So, we "free" this memory
+ * in either case
+ */
+ free(sections);
+ free(sechdrs);
+}
+
+void pre_relocations_cleanup(unsigned long map)
+{
+ if (nofgkaslr)
+ return;
+
+ sort_kallsyms(map);
+}
+
+static void move_text(int num_sections, char *secstrings, Elf_Shdr *text,
+ void *source, void *dest, Elf64_Phdr *phdr)
+{
+ unsigned long adjusted_addr;
+ int *index_list;
+ int copy_bytes;
+ void *stash;
+ int i, j;
+
+ memmove(dest, source + text->sh_offset, text->sh_size);
+ copy_bytes = text->sh_size;
+ dest += text->sh_size;
+ adjusted_addr = text->sh_addr + text->sh_size;
+
+ /*
+ * we leave the sections sorted in their original order
+ * by s->sh_addr, but shuffle the indexes in a random
+ * order for copying.
+ */
+ index_list = malloc(sizeof(int) * num_sections);
+ if (!index_list)
+ error("Failed to allocate space for index list");
+
+ for (i = 0; i < num_sections; i++)
+ index_list[i] = i;
+
+#define get_random_long() kaslr_get_random_long(NULL)
+ shuffle_array(index_list, num_sections);
+#undef get_random_long
+
+ /*
+ * to avoid overwriting earlier sections before they can get
+ * copied to dest, stash everything into a buffer first.
+ * this will cause our source address to be off by
+ * phdr->p_offset though, so we'll adjust s->sh_offset below.
+ *
+ * TBD: ideally we'd simply decompress higher up so that our
+ * copy wasn't in danger of overwriting anything important.
+ */
+ stash = malloc(phdr->p_filesz);
+ if (!stash)
+ error("Failed to allocate space for text stash");
+
+ memcpy(stash, source + phdr->p_offset, phdr->p_filesz);
+
+ /* now we'd walk through the sections. */
+ for (j = 0; j < num_sections; j++) {
+ unsigned long aligned_addr;
+ int pad_bytes;
+ Elf_Shdr *s;
+ void *src;
+
+ s = sections[index_list[j]];
+
+ /* align addr for this section */
+ aligned_addr = ALIGN(adjusted_addr, s->sh_addralign);
+
+ /*
+ * copy out of stash, so adjust offset
+ */
+ src = stash + s->sh_offset - phdr->p_offset;
+
+ /*
+ * Fill any space between sections with int3
+ */
+ pad_bytes = aligned_addr - adjusted_addr;
+ memset(dest, 0xcc, pad_bytes);
+
+ dest = (void *)ALIGN((unsigned long)dest, s->sh_addralign);
+
+ memmove(dest, src, s->sh_size);
+
+ dest += s->sh_size;
+ copy_bytes += s->sh_size + pad_bytes;
+ adjusted_addr = aligned_addr + s->sh_size;
+
+ /* we can blow away sh_offset for our own uses */
+ s->sh_offset = aligned_addr - s->sh_addr;
+ }
+
+ free(index_list);
+
+ /*
+ * move remainder of text segment. Ok to just use original source
+ * here since this area is untouched.
+ */
+ memmove(dest, source + text->sh_offset + copy_bytes,
+ phdr->p_filesz - copy_bytes);
+ free(stash);
+}
+
+static void parse_symtab(const Elf64_Sym *symtab, const char *strtab,
+ long num_syms)
+{
+ const Elf64_Sym *sym;
+
+ if (!symtab || !strtab)
+ return;
+
+ debug_putstr("\nLooking for symbols... ");
+
+ /*
+ * walk through the symbol table looking for the symbols
+ * that we care about.
+ */
+ for (sym = symtab; --num_syms >= 0; sym++) {
+ if (!sym->st_name)
+ continue;
+
+#define GEN(s) ({ \
+ if (!addr_##s && !strcmp(#s, strtab + sym->st_name)) { \
+ addr_##s = sym->st_value; \
+ continue; \
+ } \
+});
+#include "gen-symbols.h"
+#undef GEN
+ }
+}
+
+void layout_randomized_image(void *output, Elf64_Ehdr *ehdr, Elf64_Phdr *phdrs)
+{
+ Elf64_Sym *symtab = NULL;
+ Elf_Shdr *percpu = NULL;
+ Elf_Shdr *text = NULL;
+ unsigned int shstrndx;
+ int num_sections = 0;
+ unsigned long shnum;
+ char *strtab = NULL;
+ long num_syms = 0;
+ const char *sname;
+ char *secstrings;
+ Elf_Shdr shdr;
+ Elf_Shdr *s;
+ void *dest;
+ int i;
+
+ debug_putstr("\nParsing ELF section headers... ");
+
+ /*
+ * Even though fgkaslr may have been disabled, we still
+ * need to parse through the section headers to get the
+ * start and end of the percpu section. This is because
+ * if we were built with CONFIG_FG_KASLR, there are more
+ * relative relocations present in vmlinux.relocs than
+ * just the percpu, and only the percpu relocs need to be
+ * adjusted when using just normal base address kaslr.
+ */
+ if (cmdline_find_option_bool("nofgkaslr")) {
+ warn("FG_KASLR disabled on cmdline.");
+ nofgkaslr = 1;
+ }
+
+ /* read the first section header */
+ shnum = ehdr->e_shnum;
+ shstrndx = ehdr->e_shstrndx;
+ if (shnum == SHN_UNDEF || shstrndx == SHN_XINDEX) {
+ memcpy(&shdr, output + ehdr->e_shoff, sizeof(shdr));
+ if (shnum == SHN_UNDEF)
+ shnum = shdr.sh_size;
+ if (shstrndx == SHN_XINDEX)
+ shstrndx = shdr.sh_link;
+ }
+
+ /* we are going to need to allocate space for the section headers */
+ sechdrs = malloc(sizeof(*sechdrs) * shnum);
+ if (!sechdrs)
+ error("Failed to allocate space for shdrs");
+
+ sections = malloc(sizeof(*sections) * shnum);
+ if (!sections)
+ error("Failed to allocate space for section pointers");
+
+ memcpy(sechdrs, output + ehdr->e_shoff,
+ sizeof(*sechdrs) * shnum);
+
+ /* we need to allocate space for the section string table */
+ s = &sechdrs[shstrndx];
+
+ secstrings = malloc(s->sh_size);
+ if (!secstrings)
+ error("Failed to allocate space for shstr");
+
+ memcpy(secstrings, output + s->sh_offset, s->sh_size);
+
+ /*
+ * now we need to walk through the section headers and collect the
+ * sizes of the .text sections to be randomized.
+ */
+ for (i = 0; i < shnum; i++) {
+ s = &sechdrs[i];
+ sname = secstrings + s->sh_name;
+
+ if (s->sh_type == SHT_SYMTAB) {
+ /* only one symtab per image */
+ if (symtab)
+ error("Unexpected duplicate symtab");
+
+ symtab = malloc(s->sh_size);
+ if (!symtab)
+ error("Failed to allocate space for symtab");
+
+ memcpy(symtab, output + s->sh_offset, s->sh_size);
+ num_syms = s->sh_size / sizeof(*symtab);
+ continue;
+ }
+
+ if (s->sh_type == SHT_STRTAB && i != ehdr->e_shstrndx) {
+ if (strtab)
+ error("Unexpected duplicate strtab");
+
+ strtab = malloc(s->sh_size);
+ if (!strtab)
+ error("Failed to allocate space for strtab");
+
+ memcpy(strtab, output + s->sh_offset, s->sh_size);
+ }
+
+ if (!strcmp(sname, ".text")) {
+ if (text)
+ error("Unexpected duplicate .text section");
+
+ text = s;
+ continue;
+ }
+
+ if (!strcmp(sname, ".data..percpu")) {
+ /* get start addr for later */
+ percpu = s;
+ continue;
+ }
+
+ if (!(s->sh_flags & SHF_ALLOC) ||
+ !(s->sh_flags & SHF_EXECINSTR) ||
+ !(strstarts(sname, ".text")))
+ continue;
+
+ sections[num_sections] = s;
+
+ num_sections++;
+ }
+ sections[num_sections] = NULL;
+ sections_size = num_sections;
+
+ parse_symtab(symtab, strtab, num_syms);
+
+ for (i = 0; i < ehdr->e_phnum; i++) {
+ Elf64_Phdr *phdr = &phdrs[i];
+
+ switch (phdr->p_type) {
+ case PT_LOAD:
+ if ((phdr->p_align % 0x200000) != 0)
+ error("Alignment of LOAD segment isn't multiple of 2MB");
+ dest = output;
+ dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
+ if (!nofgkaslr &&
+ (text && phdr->p_offset == text->sh_offset)) {
+ move_text(num_sections, secstrings, text,
+ output, dest, phdr);
+ } else {
+ if (percpu &&
+ phdr->p_offset == percpu->sh_offset) {
+ percpu_start = percpu->sh_addr;
+ percpu_end = percpu_start +
+ phdr->p_filesz;
+ }
+ memmove(dest, output + phdr->p_offset,
+ phdr->p_filesz);
+ }
+ break;
+ default: /* Ignore other PT_* */
+ break;
+ }
+ }
+
+ /* we need to keep the section info to redo relocs */
+ free(secstrings);
+ free(phdrs);
+}
diff --git a/arch/x86/boot/compressed/gen-symbols.h b/arch/x86/boot/compressed/gen-symbols.h
new file mode 100644
index 000000000000..6828c80dd19f
--- /dev/null
+++ b/arch/x86/boot/compressed/gen-symbols.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * List of symbols needed for both C code and objcopy when FG-KASLR is on.
+ * We declare them once and then just use GEN() definition.
+ *
+ * Copyright (C) 2021, Intel Corporation.
+ * Author: Alexander Lobakin <[email protected]>
+ */
+
+#ifdef GEN
+GEN(__altinstr_replacement)
+GEN(__altinstr_replacement_end)
+GEN(__start___ex_table)
+GEN(__start_orc_unwind)
+GEN(__start_orc_unwind_ip)
+GEN(__stop___ex_table)
+GEN(__stop_orc_unwind_ip)
+GEN(_einittext)
+GEN(_etext)
+GEN(_sinittext)
+GEN(_stext)
+GEN(kallsyms_addresses)
+GEN(kallsyms_markers)
+GEN(kallsyms_names)
+GEN(kallsyms_num_syms)
+GEN(kallsyms_offsets)
+GEN(kallsyms_relative_base)
+GEN(kallsyms_token_index)
+GEN(kallsyms_token_table)
+#endif /* GEN */
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index a4339cb2d247..bd733e1abc75 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -207,10 +207,21 @@ static void handle_relocations(void *output, unsigned long output_len,
if (IS_ENABLED(CONFIG_X86_64))
delta = virt_addr - LOAD_PHYSICAL_ADDR;
- if (!delta) {
- debug_putstr("No relocation needed... ");
- return;
+ /*
+ * it is possible to have delta be zero and still have enabled
+ * fg kaslr. We need to perform relocations for fgkaslr regardless
+ * of whether the base address has moved.
+ */
+ if (!IS_ENABLED(CONFIG_FG_KASLR) ||
+ cmdline_find_option_bool("nokaslr")) {
+ if (!delta) {
+ debug_putstr("No relocation needed... ");
+ return;
+ }
}
+
+ pre_relocations_cleanup(map);
+
debug_putstr("Performing relocations... ");
/*
@@ -234,35 +245,105 @@ static void handle_relocations(void *output, unsigned long output_len,
*/
for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) {
long extended = *reloc;
+ long value;
+
+ /*
+ * if using fgkaslr, we might have moved the address
+ * of the relocation. Check it to see if it needs adjusting
+ * from the original address.
+ */
+ adjust_address(&extended);
+
extended += map;
ptr = (unsigned long)extended;
if (ptr < min_addr || ptr > max_addr)
error("32-bit relocation outside of kernel!\n");
- *(uint32_t *)ptr += delta;
+ value = *(int32_t *)ptr;
+
+ /*
+ * If using fgkaslr, the value of the relocation
+ * might need to be changed because it referred
+ * to an address that has moved.
+ */
+ adjust_address(&value);
+
+ value += delta;
+
+ *(uint32_t *)ptr = value;
}
#ifdef CONFIG_X86_64
while (*--reloc) {
long extended = *reloc;
+ long oldvalue, value;
+ Elf64_Shdr *s;
+
+ /*
+ * if using fgkaslr, we might have moved the address
+ * of the relocation. Check it to see if it needs adjusting
+ * from the original address.
+ */
+ s = adjust_address(&extended);
+
extended += map;
ptr = (unsigned long)extended;
if (ptr < min_addr || ptr > max_addr)
error("inverse 32-bit relocation outside of kernel!\n");
- *(int32_t *)ptr -= delta;
+ value = *(int32_t *)ptr;
+ oldvalue = value;
+
+ /*
+ * If using fgkaslr, these relocs will contain
+ * relative offsets which might need to be
+ * changed because it referred
+ * to an address that has moved.
+ */
+ adjust_relative_offset(*reloc, &value, s);
+
+ /*
+ * only percpu symbols need to have their values adjusted for
+ * base address kaslr since relative offsets within the .text
+ * and .text.* sections are ok wrt each other.
+ */
+ if (is_percpu_addr(*reloc, oldvalue))
+ value -= delta;
+
+ *(int32_t *)ptr = value;
}
for (reloc--; *reloc; reloc--) {
long extended = *reloc;
+ long value;
+
+ /*
+ * if using fgkaslr, we might have moved the address
+ * of the relocation. Check it to see if it needs adjusting
+ * from the original address.
+ */
+ adjust_address(&extended);
+
extended += map;
ptr = (unsigned long)extended;
if (ptr < min_addr || ptr > max_addr)
error("64-bit relocation outside of kernel!\n");
- *(uint64_t *)ptr += delta;
+ value = *(int64_t *)ptr;
+
+ /*
+ * If using fgkaslr, the value of the relocation
+ * might need to be changed because it referred
+ * to an address that has moved.
+ */
+ adjust_address(&value);
+
+ value += delta;
+
+ *(uint64_t *)ptr = value;
}
+ post_relocations_cleanup(map);
#endif
}
#else
@@ -271,6 +352,35 @@ static inline void handle_relocations(void *output, unsigned long output_len,
{ }
#endif
+static void layout_image(void *output, Elf_Ehdr *ehdr, Elf_Phdr *phdrs)
+{
+ int i;
+ void *dest;
+ Elf_Phdr *phdr;
+
+ for (i = 0; i < ehdr->e_phnum; i++) {
+ phdr = &phdrs[i];
+
+ switch (phdr->p_type) {
+ case PT_LOAD:
+#ifdef CONFIG_X86_64
+ if ((phdr->p_align % 0x200000) != 0)
+ error("Alignment of LOAD segment isn't multiple of 2MB");
+#endif
+#ifdef CONFIG_RELOCATABLE
+ dest = output;
+ dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
+#else
+ dest = (void *)(phdr->p_paddr);
+#endif
+ memmove(dest, output + phdr->p_offset, phdr->p_filesz);
+ break;
+ default: /* Ignore other PT_* */
+ break;
+ }
+ }
+}
+
static void parse_elf(void *output)
{
#ifdef CONFIG_X86_64
@@ -282,6 +392,7 @@ static void parse_elf(void *output)
#endif
void *dest;
int i;
+ int nokaslr;
memcpy(&ehdr, output, sizeof(ehdr));
if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
@@ -292,6 +403,12 @@ static void parse_elf(void *output)
return;
}
+ if (IS_ENABLED(CONFIG_FG_KASLR)) {
+ nokaslr = cmdline_find_option_bool("nokaslr");
+ if (nokaslr)
+ warn("FG_KASLR disabled: 'nokaslr' on cmdline.");
+ }
+
debug_putstr("Parsing ELF... ");
phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
@@ -300,26 +417,10 @@ static void parse_elf(void *output)
memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
- for (i = 0; i < ehdr.e_phnum; i++) {
- phdr = &phdrs[i];
-
- switch (phdr->p_type) {
- case PT_LOAD:
-#ifdef CONFIG_X86_64
- if ((phdr->p_align % 0x200000) != 0)
- error("Alignment of LOAD segment isn't multiple of 2MB");
-#endif
-#ifdef CONFIG_RELOCATABLE
- dest = output;
- dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
-#else
- dest = (void *)(phdr->p_paddr);
-#endif
- memmove(dest, output + phdr->p_offset, phdr->p_filesz);
- break;
- default: /* Ignore other PT_* */ break;
- }
- }
+ if (IS_ENABLED(CONFIG_FG_KASLR) && !nokaslr)
+ layout_randomized_image(output, &ehdr, phdrs);
+ else
+ layout_image(output, &ehdr, phdrs);
free(phdrs);
}
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
index 16ed360b6692..1315a101c1c9 100644
--- a/arch/x86/boot/compressed/misc.h
+++ b/arch/x86/boot/compressed/misc.h
@@ -83,6 +83,34 @@ struct mem_vector {
u64 size;
};
+#ifdef CONFIG_X86_64
+#define Elf_Ehdr Elf64_Ehdr
+#define Elf_Phdr Elf64_Phdr
+#define Elf_Shdr Elf64_Shdr
+#else
+#define Elf_Ehdr Elf32_Ehdr
+#define Elf_Phdr Elf32_Phdr
+#define Elf_Shdr Elf32_Shdr
+#endif
+
+#ifdef CONFIG_FG_KASLR
+void layout_randomized_image(void *output, Elf_Ehdr *ehdr, Elf_Phdr *phdrs);
+void pre_relocations_cleanup(unsigned long map);
+void post_relocations_cleanup(unsigned long map);
+Elf_Shdr *adjust_address(long *address);
+void adjust_relative_offset(long pc, long *value, Elf_Shdr *section);
+bool is_percpu_addr(long pc, long offset);
+#else
+static inline void layout_randomized_image(void *output, Elf_Ehdr *ehdr,
+ Elf_Phdr *phdrs) { }
+static inline void pre_relocations_cleanup(unsigned long map) { }
+static inline void post_relocations_cleanup(unsigned long map) { }
+static inline Elf_Shdr *adjust_address(long *address) { return NULL; }
+static inline void adjust_relative_offset(long pc, long *value,
+ Elf_Shdr *section) { }
+static inline bool is_percpu_addr(long pc, long offset) { return true; }
+#endif
+
#ifdef CONFIG_RANDOMIZE_BASE
/* kaslr.c */
void choose_random_location(unsigned long input,
diff --git a/arch/x86/boot/compressed/utils.c b/arch/x86/boot/compressed/utils.c
new file mode 100644
index 000000000000..7c3c745f6251
--- /dev/null
+++ b/arch/x86/boot/compressed/utils.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This contains various libraries that are needed for FG-KASLR.
+ *
+ * Copyright (C) 2020-2021, Intel Corporation.
+ * Author: Kristen Carlson Accardi <[email protected]>
+ */
+
+#define _LINUX_KPROBES_H
+#define NOKPROBE_SYMBOL(fname)
+
+#include "../../../../lib/sort.c"
+#include "../../../../lib/bsearch.c"
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 9191280d9ea3..ce5fdee49046 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -24,7 +24,18 @@
# error "Invalid value for CONFIG_PHYSICAL_ALIGN"
#endif
-#if defined(CONFIG_KERNEL_BZIP2)
+#ifdef CONFIG_FG_KASLR
+/*
+ * We need extra boot heap when using fgkaslr because we make a copy
+ * of the original decompressed kernel to avoid issues with writing
+ * over ourselves when shuffling the sections. We also need extra
+ * space for resorting kallsyms after shuffling. This value could
+ * be decreased if free() would release memory properly, or if we
+ * could avoid the kernel copy. It would need to be increased if we
+ * find additional tables that need to be resorted.
+ */
+# define BOOT_HEAP_SIZE 0x4800000
+#elif defined(CONFIG_KERNEL_BZIP2)
# define BOOT_HEAP_SIZE 0x400000
#elif defined(CONFIG_KERNEL_ZSTD)
/*
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 6f026400261e..6620f069b7ef 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -304,7 +304,9 @@ SECTIONS
* get the address and the length of them to patch the kernel safely.
*/
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ __altinstr_replacement = .;
*(.altinstr_replacement)
+ __altinstr_replacement_end = .;
}
/*
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index 61bf4774b8f2..1c74d9594919 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -299,6 +299,7 @@ typedef struct elf64_phdr {
#define SHN_LIVEPATCH 0xff20
#define SHN_ABS 0xfff1
#define SHN_COMMON 0xfff2
+#define SHN_XINDEX 0xffff
#define SHN_HIRESERVE 0xffff
typedef struct elf32_shdr {
--
2.33.1
Now that we have full support of FG-KASLR from both kernel core
and x86 code, allow FG-KASLR to be enabled for x86_64 if the
"regular" KASLR is also turned on.
Signed-off-by: Alexander Lobakin <[email protected]>
---
arch/x86/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3e4ea355147b..f7472528f3dd 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -105,6 +105,7 @@ config X86
select ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEBUG_PAGEALLOC
+ select ARCH_SUPPORTS_FG_KASLR if X86_64 && RANDOMIZE_BASE
select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
select ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP if NR_CPUS <= 4096
select ARCH_SUPPORTS_LTO_CLANG
--
2.33.1
Instead of relying on the linker and his heuristics about where to
place (orphan) .text.* section, use a script to read vmlinux.o and
generate a new .tmp_vmlinux.lds which will contain an entry for
each of them. It relies on a magic marker inside the preprocessed
vmlinux.lds (which is harmless in case FG-KASLR is disabled) and
injects a list of input text sections there.
As a bonus, this approach allows us to configure FG-KASLR in terms
of number of functions per each section. The zero value means one
section per each functions, it is the strongest choice, but the
resulting vmlinux also has the biggest size here, as well as the
total number of sections and the boottime delay (which is still
barely noticeable). The values of 4-8 are still strong enough and
allows to save some space, and so on.
We also keep tracking the maximal alignment we found while
traversing through the readelf output and the number of times we
spotted it. It's actual only for values >= 64 and is required to
reserve some space between the last .text.* section and the _etext
marker.
The reason is that e.g. x86 has at least 3 ASM sections (4 with
ClangCFI) aligned to 4096, and when mixing them with the small
sections, we could go past the _etext and render the kernel
unbootable. This reserved space ensures this won't happen.
When CONFIG_HAVE_ASM_FUNCTION_SECTIONS=y, the generated script makes
sure you don't have anything in "plain" ".text" to not leak random
code. This assertion is omitted otherwise.
Signed-off-by: Alexander Lobakin <[email protected]>
---
arch/x86/kernel/vmlinux.lds.S | 4 +-
include/asm-generic/vmlinux.lds.h | 6 ++
init/Kconfig | 14 +++
scripts/generate_text_sections.pl | 165 ++++++++++++++++++++++++++++++
scripts/link-vmlinux.sh | 29 +++++-
5 files changed, 216 insertions(+), 2 deletions(-)
create mode 100755 scripts/generate_text_sections.pl
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 6620f069b7ef..6f039bf9de34 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -147,9 +147,11 @@ SECTIONS
#endif
} :text =0xcccc
+ TEXT_FG_KASLR
+
/* End of text section, which should occupy whole number of pages */
- _etext = .;
. = ALIGN(PAGE_SIZE);
+ _etext = .;
X86_ALIGN_RODATA_BEGIN
RO_DATA(PAGE_SIZE)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 586465b2abb2..e63d5a69f1bc 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -130,6 +130,12 @@
#define TEXT_MAIN .text
#endif
+/*
+ * Used by scripts/generate_text_sections.pl to inject text sections,
+ * harmless if FG-KASLR is disabled.
+ */
+#define TEXT_FG_KASLR __fg_kaslr_magic = .;
+
/*
* GCC 4.5 and later have a 32 bytes section alignment for structures.
* Except GCC 4.9, that feels the need to align on 64 bytes.
diff --git a/init/Kconfig b/init/Kconfig
index a74b3c3acb49..381b063b4925 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2079,6 +2079,20 @@ config FG_KASLR
If unsure, say N.
+config FG_KASLR_SHIFT
+ int "FG-KASLR granularity (number of functions per section shift)"
+ depends on FG_KASLR
+ range 0 16
+ default 0
+ help
+ This sets the number of functions that will be put in each section
+ as a power of two.
+ Decreasing the value increases the randomization, but also increases
+ the size of the final kernel/vmlinux due to the amount of sections.
+ 0 means that a separate section will be created for each function.
+ 16 almost disables the randomization, leaving only the manual
+ separation.
+
endmenu # General setup
source "arch/Kconfig"
diff --git a/scripts/generate_text_sections.pl b/scripts/generate_text_sections.pl
new file mode 100755
index 000000000000..c95b9be28920
--- /dev/null
+++ b/scripts/generate_text_sections.pl
@@ -0,0 +1,165 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Generates a new LD script with every .text.* section described for FG-KASLR
+# to avoid orphan/heuristic section placement and double-checks we don't have
+# any symbols in plain .text section.
+#
+# Copyright (C) 2021, Intel Corporation.
+# Author: Alexander Lobakin <[email protected]>
+#
+
+use strict;
+use warnings;
+
+## parameters
+my $add_assert = 0;
+my $expecting = 0;
+my $shift = 0;
+my $file;
+
+foreach (@ARGV) {
+ if ($_ eq '-a') {
+ $add_assert = 1;
+ } elsif ($_ eq '-s') {
+ $expecting = 1;
+ } elsif ($expecting) {
+ $shift = $_ + 0;
+ if ($shift < 0) {
+ $shift = 0;
+ } elsif ($shift > 16) {
+ $shift = 16;
+ }
+ $expecting = 0;
+ } elsif (!defined($file)) {
+ $file = $_;
+ } else {
+ die "$0: usage: $0 [-a] [-s shift] binary < linker script";
+ }
+}
+
+if (!defined($file)) {
+ die "$0: usage: $0 [-a] [-s shift] binary < linker script";
+}
+
+## environment
+my $readelf = $ENV{'READELF'} || die "$0: ERROR: READELF not set?";
+
+## text sections array
+my @sections = ();
+my $has_ccf = 0;
+
+## max alignment found to reserve some space. It would probably be
+## better to start from 64, but CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B
+## (which aligns every function to 64b) would kill us then
+my $max_align = 128;
+my $count = 0;
+
+sub read_sections {
+ open(my $fh, "\"$readelf\" -SW \"$file\" 2>/dev/null |")
+ or die "$0: ERROR: failed to execute \"$readelf\": $!";
+
+ while (<$fh>) {
+ my $name;
+ my $align;
+ chomp;
+
+ ($name, $align) = $_ =~ /^\s*\[[\s0-9]*\]\s*(\.\S*)\s*[A-Z]*\s*[0-9a-f]{16}\s*[0-9a-f]*\s*[0-9a-f]*\s*[0-9a-f]*\s*[0-9a-f]{2}\s*[A-Z]{2}\s*[0-9]\s*[0-9]\s*([0-9]*)$/;
+
+ if (!defined($name)) {
+ next;
+ }
+
+ ## Clang 13 onwards emits __cfi_check_fail only on final
+ ## linking, so it won't appear in .o files and will be
+ ## missing in @sections. Add it manually to prevent
+ ## spawning orphans.
+ if ($name eq ".text.__cfi_check_fail") {
+ $has_ccf = 1;
+ }
+
+ if (!($name =~ /^\.text(\.(?!hot\.|unknown\.|unlikely\.|.san\.)[0-9a-zA-Z_]*){1,2}((\.constprop|\.isra|\.part)\.[0-9]){0,2}(|\.[0-9cfi]*)$/)) {
+ next;
+ }
+
+ if ($align > $max_align) {
+ $max_align = $align;
+ $count = 1;
+ } elsif ($align == $max_align) {
+ $count++;
+ }
+
+ push(@sections, $name);
+ }
+
+ close($fh);
+
+ if (!$has_ccf) {
+ push(@sections, ".text.__cfi_check_fail");
+ }
+
+ @sections = sort @sections;
+}
+
+sub print_sections {
+ my $fps = 1 << $shift;
+ my $counter = 1;
+
+ print "\t.text.0 : ALIGN(16) {\n";
+ print "\t\t*(.text)\n";
+ print "\t}\n";
+
+ ## If we have ASM function sections, we shouldn't have anything
+ ## in here.
+ if ($add_assert) {
+ print "\tASSERT(SIZEOF(.text.0) == 0, \"Plain .text is not empty!\")\n\n";
+ }
+
+ if (!@sections) {
+ return;
+ }
+
+ while () {
+ print "\t.text.$counter : ALIGN(16) {\n";
+
+ my @a = (($counter - 1) * $fps .. ($counter * $fps) - 1);
+ for (@a) {
+ print "\t\t*($sections[$_])\n";
+
+ if ($sections[$_] eq $sections[-1]) {
+ print "\t}\n";
+ return;
+ }
+ }
+
+ print "\t}\n";
+ $counter++;
+ }
+}
+
+sub print_reserve {
+ ## If we have text sections aligned with 64 bytes or more, make
+ ## sure we reserve some space for them to not overlap _etext
+ ## while shuffling sections.
+ if (!$count) {
+ return;
+ }
+
+ print "\n\t. += $max_align * $count;\n";
+}
+
+sub print_lds {
+ while (<STDIN>) {
+ if ($_ =~ /^\s*__fg_kaslr_magic = \.;$/) {
+ print_sections();
+ print_reserve();
+ } else {
+ print $_;
+ }
+ }
+}
+
+## main
+
+read_sections();
+print_lds();
diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 5cdd9bc5c385..9d8894cb1c21 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -66,6 +66,22 @@ gen_symversions()
done
}
+# If CONFIG_FG_KASLR is selected, generate a linker script which will
+# declare all custom text sections for future boottime shuffling
+gen_text_sections()
+{
+ local a=""
+
+ [ -n "${CONFIG_HAVE_ASM_FUNCTION_SECTIONS}" ] && a="-a"
+
+ info GEN .tmp_vmlinux.lds
+
+ ${PERL} ${srctree}/scripts/generate_text_sections.pl \
+ ${a} -s "${CONFIG_FG_KASLR_SHIFT}" vmlinux.o \
+ < "${objtree}/${KBUILD_LDS}" \
+ > .tmp_vmlinux.lds
+}
+
# Link of vmlinux.o used for section mismatch analysis
# ${1} output file
modpost_link()
@@ -155,12 +171,19 @@ vmlinux_link()
local ld
local ldflags
local ldlibs
+ local lds
info LD ${output}
# skip output file argument
shift
+ if [ -n "${CONFIG_FG_KASLR}" ]; then
+ lds=".tmp_vmlinux.lds"
+ else
+ lds="${objtree}/${KBUILD_LDS}"
+ fi
+
if [ -n "${CONFIG_LTO_CLANG}" ]; then
# Use vmlinux.o instead of performing the slow LTO link again.
objs=vmlinux.o
@@ -182,7 +205,7 @@ vmlinux_link()
ldlibs=
fi
- ldflags="${ldflags} ${wl}--script=${objtree}/${KBUILD_LDS}"
+ ldflags="${ldflags} ${wl}--script=${lds}"
# The kallsyms linking does not need debug symbols included.
if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
@@ -342,6 +365,10 @@ info GEN modules.builtin
tr '\0' '\n' < modules.builtin.modinfo | sed -n 's/^[[:alnum:]:_]*\.file=//p' |
tr ' ' '\n' | uniq | sed -e 's:^:kernel/:' -e 's/$/.ko/' > modules.builtin
+if [ -n "${CONFIG_FG_KASLR}" ]; then
+ gen_text_sections
+fi
+
btf_vmlinux_bin_o=""
if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
btf_vmlinux_bin_o=.btf.vmlinux.bin.o
--
2.33.1
From: Kristen Carlson Accardi <[email protected]>
This patch makes /proc/kallsyms display in a random order, rather
than sorted by address in order to hide the newly randomized address
layout.
alobakin:
Don't depend FG-KASLR and always do that for unpriviledged accesses
as suggested by several folks.
Also, introduce and use a shuffle_array() macro which shuffles an
array using Fisher-Yates. We'll make use of it several more times
later on.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Tested-by: Tony Luck <[email protected]>
Reported-by: kernel test robot <[email protected]> # swap.cocci
Suggested-by: Ard Biesheuvel <[email protected]> # always do that
Suggested-by: Josh Poimboeuf <[email protected]> # always do that
Suggested-by: Peter Zijlstra <[email protected]> # always do that, macro
Co-developed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
include/linux/random.h | 16 ++++++++
kernel/kallsyms.c | 93 ++++++++++++++++++++++++++++++++++--------
2 files changed, 93 insertions(+), 16 deletions(-)
diff --git a/include/linux/random.h b/include/linux/random.h
index f45b8be3e3c4..c859a698089c 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -110,6 +110,22 @@ declare_get_random_var_wait(long)
unsigned long randomize_page(unsigned long start, unsigned long range);
+/**
+ * shuffle_array - use a Fisher Yates algorithm to shuffle an array.
+ * @arr: pointer to the array
+ * @nents: the number of elements in the array
+ */
+#define shuffle_array(arr, nents) ({ \
+ typeof(&(arr)[0]) __arr = &(arr)[0]; \
+ size_t __i; \
+ \
+ for (__i = (nents) - 1; __i > 0; __i--) { \
+ size_t __j = get_random_long() % (__i + 1); \
+ \
+ swap(__arr[__i], __arr[__j]); \
+ } \
+})
+
/*
* This is designed to be standalone for just prandom
* users, but for now we include it from <linux/random.h>
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 3011bc33a5ba..5d41b993113f 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -574,13 +574,15 @@ struct kallsym_iter {
loff_t pos_mod_end;
loff_t pos_ftrace_mod_end;
loff_t pos_bpf_end;
+ loff_t pos_end;
unsigned long value;
unsigned int nameoff; /* If iterating in core kernel symbols. */
char type;
char name[KSYM_NAME_LEN];
char module_name[MODULE_NAME_LEN];
int exported;
- int show_value;
+ bool show_layout;
+ loff_t shuffled_pos[];
};
int __weak arch_get_kallsym(unsigned int symnum, unsigned long *value,
@@ -660,11 +662,19 @@ static int get_ksymbol_bpf(struct kallsym_iter *iter)
*/
static int get_ksymbol_kprobe(struct kallsym_iter *iter)
{
+ int ret;
+
strlcpy(iter->module_name, "__builtin__kprobes", MODULE_NAME_LEN);
iter->exported = 0;
- return kprobe_get_kallsym(iter->pos - iter->pos_bpf_end,
- &iter->value, &iter->type,
- iter->name) < 0 ? 0 : 1;
+ ret = kprobe_get_kallsym(iter->pos - iter->pos_bpf_end,
+ &iter->value, &iter->type,
+ iter->name);
+ if (ret < 0) {
+ iter->pos_end = iter->pos;
+ return 0;
+ }
+
+ return 1;
}
/* Returns space to next name. */
@@ -687,11 +697,12 @@ static void reset_iter(struct kallsym_iter *iter, loff_t new_pos)
iter->name[0] = '\0';
iter->nameoff = get_symbol_offset(new_pos);
iter->pos = new_pos;
- if (new_pos == 0) {
+ if (iter->show_layout && new_pos == 0) {
iter->pos_arch_end = 0;
iter->pos_mod_end = 0;
iter->pos_ftrace_mod_end = 0;
iter->pos_bpf_end = 0;
+ iter->pos_end = 0;
}
}
@@ -720,13 +731,23 @@ static int update_iter_mod(struct kallsym_iter *iter, loff_t pos)
get_ksymbol_bpf(iter))
return 1;
- return get_ksymbol_kprobe(iter);
+ if ((!iter->pos_end || iter->pos_end > pos) &&
+ get_ksymbol_kprobe(iter))
+ return 1;
+
+ return 0;
}
/* Returns false if pos at or past end of file. */
static int update_iter(struct kallsym_iter *iter, loff_t pos)
{
- /* Module symbols can be accessed randomly. */
+ if (!iter->show_layout) {
+ if (pos > iter->pos_end)
+ return 0;
+
+ pos = iter->shuffled_pos[pos];
+ }
+
if (pos >= kallsyms_num_syms)
return update_iter_mod(iter, pos);
@@ -769,7 +790,7 @@ static int s_show(struct seq_file *m, void *p)
if (!iter->name[0])
return 0;
- value = iter->show_value ? (void *)iter->value : NULL;
+ value = iter->show_layout ? (void *)iter->value : NULL;
if (iter->module_name[0]) {
char type;
@@ -806,9 +827,10 @@ static inline int kallsyms_for_perf(void)
}
/*
- * We show kallsyms information even to normal users if we've enabled
- * kernel profiling and are explicitly not paranoid (so kptr_restrict
- * is clear, and sysctl_perf_event_paranoid isn't set).
+ * We show kallsyms information and display them sorted by address even
+ * to normal users if we've enabled kernel profiling and are explicitly
+ * not paranoid (so kptr_restrict is clear, and sysctl_perf_event_paranoid
+ * isn't set).
*
* Otherwise, require CAP_SYSLOG (assuming kptr_restrict isn't set to
* block even that).
@@ -838,16 +860,54 @@ static int kallsyms_open(struct inode *inode, struct file *file)
* using get_symbol_offset for every symbol.
*/
struct kallsym_iter *iter;
- iter = __seq_open_private(file, &kallsyms_op, sizeof(*iter));
- if (!iter)
- return -ENOMEM;
- reset_iter(iter, 0);
+ /*
+ * This fake iter is needed for the cases with unprivileged
+ * access. We need to know the exact number of symbols to
+ * randomize the display layout.
+ */
+ struct kallsym_iter fake;
+ size_t size = sizeof(*iter);
+ loff_t pos;
+
+ fake.show_layout = true;
+ reset_iter(&fake, 0);
/*
* Instead of checking this on every s_show() call, cache
* the result here at open time.
*/
- iter->show_value = kallsyms_show_value(file->f_cred);
+ fake.show_layout = kallsyms_show_value(file->f_cred);
+ if (fake.show_layout)
+ goto open;
+
+ for (pos = kallsyms_num_syms; update_iter_mod(&fake, pos); pos++)
+ ;
+
+ size = struct_size(iter, shuffled_pos, fake.pos_end + 1);
+
+open:
+ iter = __seq_open_private(file, &kallsyms_op, size);
+ if (!iter)
+ return -ENOMEM;
+
+ iter->show_layout = fake.show_layout;
+ reset_iter(iter, 0);
+
+ if (iter->show_layout)
+ return 0;
+
+ /* Copy the bounds since they were already discovered above */
+ iter->pos_arch_end = fake.pos_arch_end;
+ iter->pos_mod_end = fake.pos_mod_end;
+ iter->pos_ftrace_mod_end = fake.pos_ftrace_mod_end;
+ iter->pos_bpf_end = fake.pos_bpf_end;
+ iter->pos_end = fake.pos_end;
+
+ for (pos = 0; pos <= iter->pos_end; pos++)
+ iter->shuffled_pos[pos] = pos;
+
+ shuffle_array(iter->shuffled_pos, iter->pos_end + 1);
+
return 0;
}
@@ -858,6 +918,7 @@ const char *kdb_walk_kallsyms(loff_t *pos)
if (*pos == 0) {
memset(&kdb_walk_kallsyms_iter, 0,
sizeof(kdb_walk_kallsyms_iter));
+ kdb_walk_kallsyms_iter.show_layout = true;
reset_iter(&kdb_walk_kallsyms_iter, 0);
}
while (1) {
--
2.33.1
Use the same methods and scripts to generate an LD script for every
module containing all the output text sections.
The only difference there is that we don't need to reserve any space
as the memory for every section is being allocated dynamically.
I picked ".ko.lds" extension since there's a fistful of ".lds" files
inside the tree, so I couldn't count all of them as generated /
build artifacts. OTOH, we're limited in heuristics when cleaning as
dotconfig doesn't get included and stuff like ".mod.c" is just being
wiped using `find`.
Signed-off-by: Alexander Lobakin <[email protected]>
---
.gitignore | 1 +
include/asm-generic/vmlinux.lds.h | 12 ++++++++++++
init/Kconfig | 15 ++++++++++++++-
scripts/Makefile.modfinal | 20 +++++++++++++++++---
scripts/generate_text_sections.pl | 9 ++++++++-
scripts/module.lds.S | 14 +++++++++++++-
6 files changed, 65 insertions(+), 6 deletions(-)
diff --git a/.gitignore b/.gitignore
index 7afd412dadd2..d1b48f01037a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -26,6 +26,7 @@
*.gz
*.i
*.ko
+*.ko.lds
*.lex.c
*.ll
*.lst
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index e63d5a69f1bc..9f67660ace18 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -130,6 +130,18 @@
#define TEXT_MAIN .text
#endif
+/*
+ * Same for modules. However, LD_DEAD_CODE_DATA_ELIMINATION doesn't touch
+ * them, so no need to check for it here.
+ */
+#if defined(CONFIG_LTO_CLANG) && !defined(CONFIG_MODULE_FG_KASLR)
+#define TEXT_MAIN_MODULE SECT_WILDCARD(.text)
+#elif defined(CONFIG_MODULE_FG_KASLR)
+#define TEXT_MAIN_MODULE .text.__unused__
+#else
+#define TEXT_MAIN_MODULE .text
+#endif
+
/*
* Used by scripts/generate_text_sections.pl to inject text sections,
* harmless if FG-KASLR is disabled.
diff --git a/init/Kconfig b/init/Kconfig
index 38c82e21efd7..d4000885b27d 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2381,7 +2381,6 @@ config MODULE_FG_KASLR
depends on $(cc-option,-ffunction-sections)
depends on LD_HAS_Z_UNIQUE_SYMBOL || !LIVEPATCH
default FG_KASLR
- depends on BROKEN
help
This option randomizes the module text section by reordering the text
section by function at module load time. In order to use this
@@ -2390,6 +2389,20 @@ config MODULE_FG_KASLR
If unsure, say N.
+config MODULE_FG_KASLR_SHIFT
+ int "Module FG-KASLR granularity (functions per section shift)"
+ depends on MODULE_FG_KASLR
+ range 0 16
+ default 0
+ help
+ This sets the number of functions that will be put in each section
+ as a power of two.
+ Decreasing the value increases the randomization, but also increases
+ the size of the final kernel module due to the amount of sections.
+ 0 means that a separate section will be created for each function.
+ 16 almost disables the randomization, leaving only the manual
+ separation.
+
endif # MODULES
config MODULES_TREE_LOOKUP
diff --git a/scripts/Makefile.modfinal b/scripts/Makefile.modfinal
index 7f39599e9fae..4ca9d8fc978d 100644
--- a/scripts/Makefile.modfinal
+++ b/scripts/Makefile.modfinal
@@ -28,13 +28,25 @@ quiet_cmd_cc_o_c = CC [M] $@
%.mod.o: %.mod.c FORCE
$(call if_changed_dep,cc_o_c)
+ifdef CONFIG_MODULE_FG_KASLR
+quiet_cmd_gen_modules_lds = GEN [M] $@
+ cmd_gen_modules_lds = \
+ $(PERL) $(srctree)/scripts/generate_text_sections.pl \
+ $(if $(CONFIG_HAVE_ASM_FUNCTION_SECTIONS),-a) \
+ -s $(CONFIG_MODULE_FG_KASLR_SHIFT) $(filter %.o, $^) \
+ < $(filter %.lds, $^) > $@
+
+%.ko.lds: %$(mod-prelink-ext).o scripts/module.lds FORCE
+ $(call if_changed,gen_modules_lds)
+endif
+
ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
quiet_cmd_ld_ko_o = LD [M] $@
cmd_ld_ko_o += \
$(LD) -r $(KBUILD_LDFLAGS) \
$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
- -T scripts/module.lds -o $@ $(filter %.o, $^); \
+ -T $(filter %.lds, $^) -o $@ $(filter %.o, $^); \
$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
quiet_cmd_btf_ko = BTF [M] $@
@@ -56,13 +68,15 @@ if_changed_except = $(if $(call newer_prereqs_except,$(2))$(cmd-check), \
# Re-generate module BTFs if either module's .ko or vmlinux changed
-$(modules): %.ko: %$(mod-prelink-ext).o %.mod.o scripts/module.lds $(if $(KBUILD_BUILTIN),vmlinux) FORCE
+$(modules): %.ko: %$(mod-prelink-ext).o %.mod.o
+$(modules): %.ko: $(if $(CONFIG_MODULE_FG_KASLR),%.ko.lds,scripts/module.lds)
+$(modules): %.ko: $(if $(KBUILD_BUILTIN),vmlinux) FORCE
+$(call if_changed_except,ld_ko_o,vmlinux)
ifdef CONFIG_DEBUG_INFO_BTF_MODULES
+$(if $(newer-prereqs),$(call cmd,btf_ko))
endif
-targets += $(modules) $(modules:.ko=.mod.o)
+targets += $(modules) $(modules:.ko=.mod.o) $(modules:.ko=.ko.lds)
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
diff --git a/scripts/generate_text_sections.pl b/scripts/generate_text_sections.pl
index c95b9be28920..79a37a3c079f 100755
--- a/scripts/generate_text_sections.pl
+++ b/scripts/generate_text_sections.pl
@@ -48,6 +48,7 @@ my $readelf = $ENV{'READELF'} || die "$0: ERROR: READELF not set?";
## text sections array
my @sections = ();
my $has_ccf = 0;
+my $vmlinux = 0;
## max alignment found to reserve some space. It would probably be
## better to start from 64, but CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B
@@ -78,6 +79,12 @@ sub read_sections {
$has_ccf = 1;
}
+ ## If we're processing a module, don't reserve any space
+ ## at the end as its sections are being allocated separately.
+ if ($name eq ".sched.text") {
+ $vmlinux = 1;
+ }
+
if (!($name =~ /^\.text(\.(?!hot\.|unknown\.|unlikely\.|.san\.)[0-9a-zA-Z_]*){1,2}((\.constprop|\.isra|\.part)\.[0-9]){0,2}(|\.[0-9cfi]*)$/)) {
next;
}
@@ -141,7 +148,7 @@ sub print_reserve {
## If we have text sections aligned with 64 bytes or more, make
## sure we reserve some space for them to not overlap _etext
## while shuffling sections.
- if (!$count) {
+ if (!$vmlinux or !$count) {
return;
}
diff --git a/scripts/module.lds.S b/scripts/module.lds.S
index 1d0e1e4dc3d2..6e957aa614b1 100644
--- a/scripts/module.lds.S
+++ b/scripts/module.lds.S
@@ -3,6 +3,11 @@
* Archs are free to supply their own linker scripts. ld will
* combine them automatically.
*/
+
+#include <asm-generic/vmlinux.lds.h>
+
+#undef SANITIZER_DISCARDS
+
#ifdef CONFIG_CFI_CLANG
# include <asm/page.h>
# define ALIGN_CFI ALIGN(PAGE_SIZE)
@@ -58,9 +63,16 @@ SECTIONS {
*/
.text : ALIGN_CFI {
*(.text.__cfi_check)
- *(.text .text.[0-9a-zA-Z_]* .text..L.cfi*)
+ *(TEXT_MAIN_MODULE)
+ *(.text..L.cfi.jumptable .text..L.cfi.jumptable.*)
+ }
+#elif defined(CONFIG_MODULE_FG_KASLR)
+ .text : {
+ *(TEXT_MAIN_MODULE)
}
#endif
+
+ TEXT_FG_KASLR
}
/* bring in arch-specific sections */
--
2.33.1
From: Kristen Carlson Accardi <[email protected]>
Describe the main principles behind the FG-KASLR hardening feature
in a new doc section.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
.../admin-guide/kernel-parameters.txt | 6 +
Documentation/security/fgkaslr.rst | 172 ++++++++++++++++++
Documentation/security/index.rst | 1 +
3 files changed, 179 insertions(+)
create mode 100644 Documentation/security/fgkaslr.rst
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index fc34332c8d9a..b79423c5a41a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2224,6 +2224,12 @@
kernel and module base offset ASLR (Address Space
Layout Randomization).
+ nofgkaslr [KNL]
+ When CONFIG_FG_KASLR is set, this parameter
+ disables kernel function granular ASLR
+ (Address Space Layout Randomization).
+ See Documentation/security/fgkaslr.rst.
+
kasan_multi_shot
[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
report on every invalid memory access. Without this
diff --git a/Documentation/security/fgkaslr.rst b/Documentation/security/fgkaslr.rst
new file mode 100644
index 000000000000..50dc24f675b5
--- /dev/null
+++ b/Documentation/security/fgkaslr.rst
@@ -0,0 +1,172 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================================================
+Function Granular Kernel Address Space Layout Randomization (fgkaslr)
+=====================================================================
+
+:Date: 6 April 2020
+:Author: Kristen Accardi
+
+Kernel Address Space Layout Randomization (KASLR) was merged into the kernel
+with the objective of increasing the difficulty of code reuse attacks. Code
+reuse attacks reused existing code snippets to get around existing memory
+protections. They exploit software bugs which expose addresses of useful code
+snippets to control the flow of execution for their own nefarious purposes.
+KASLR as it was originally implemented moves the entire kernel code text as a
+unit at boot time in order to make addresses less predictable. The order of the
+code within the segment is unchanged - only the base address is shifted. There
+are a few shortcomings to this algorithm.
+
+1. Low Entropy - there are only so many locations the kernel can fit in. This
+ means an attacker could guess without too much trouble.
+2. Knowledge of a single address can reveal the offset of the base address,
+ exposing all other locations for a published/known kernel image.
+3. Info leaks abound.
+
+Finer grained ASLR has been proposed as a way to make ASLR more resistant
+to info leaks. It is not a new concept at all, and there are many variations
+possible. Function reordering is an implementation of finer grained ASLR
+which randomizes the layout of an address space on a function level
+granularity. The term "fgkaslr" is used in this document to refer to the
+technique of function reordering when used with KASLR, as well as finer grained
+KASLR in general.
+
+The objective of this patch set is to improve a technology that is already
+merged into the kernel (KASLR). This code will not prevent all code reuse
+attacks, and should be considered as one of several tools that can be used.
+
+Implementation Details
+======================
+
+The over-arching objective of the fgkaslr implementation is incremental
+improvement over the existing KASLR algorithm. It is designed to work with
+the existing solution, and there are two main area where code changes occur:
+Build time, and Load time.
+
+Build time
+----------
+
+GCC has had an option to place functions into individual .text sections
+for many years now (-ffunction-sections). This option is used to implement
+function reordering at load time. The final compiled vmlinux retains all the
+section headers, which can be used to help find the address ranges of each
+function. Using this information and an expanded table of relocation addresses,
+individual text sections can be shuffled immediately after decompression.
+Some data tables inside the kernel that have assumptions about order
+require sorting after the update. In order to modify these tables,
+a few key symbols from the objcopy symbol stripping process are preserved
+for use after shuffling the text segments. Any special input sections which are
+defined by the kernel build process and collected into the .text output
+segment are left unmodified and will still be present inside the .text segment,
+unrandomized other than normal base address randomization.
+
+Load time
+---------
+
+The boot kernel was modified to parse the vmlinux elf file after
+decompression to check for symbols for modifying data tables, and to
+look for any .text.* sections to randomize. The sections are then shuffled,
+and tables are updated or resorted. The existing code which updated relocation
+addresses was modified to account for not just a fixed delta from the load
+address, but the offset that the function section was moved to. This requires
+inspection of each address to see if it was impacted by a randomization.
+
+In order to hide the new layout, symbols reported through /proc/kallsyms will
+be displayed in a random order.
+
+Performance Impact
+==================
+
+There are two areas where function reordering can impact performance: boot
+time latency, and run time performance.
+
+Boot time latency
+-----------------
+
+This implementation of finer grained KASLR impacts the boot time of the kernel
+in several places. It requires additional parsing of the kernel ELF file to
+obtain the section headers of the sections to be randomized. It calls the
+random number generator for each section to be randomized to determine that
+section's new memory location. It copies the decompressed kernel into a new
+area of memory to avoid corruption when laying out the newly randomized
+sections. It increases the number of relocations the kernel has to perform at
+boot time vs. standard KASLR, and it also requires a lookup on each address
+that needs to be relocated to see if it was in a randomized section and needs
+to be adjusted by a new offset. Finally, it re-sorts a few data tables that
+are required to be sorted by address.
+
+Booting a test VM on a modern, well appointed system showed an increase in
+latency of approximately 1 second.
+
+Run time
+--------
+
+The performance impact at run-time of function reordering varies by workload.
+Randomly reordering the functions will cause an increase in cache misses
+for some workloads. Some workloads perform significantly worse under FGKASLR,
+while others stay the same or even improve. In general, it will depend on the
+code flow whether or not finer grained KASLR will impact a workload, and how
+the underlying code was designed. Because the layout changes per boot, each
+time a system is rebooted the performance of a workload may change.
+
+Image Size
+==========
+
+fgkaslr increases the size of the kernel binary due to the extra section
+headers that are included, as well as the extra relocations that need to
+be added. You can expect fgkaslr to increase the size of the resulting
+vmlinux by about 3%, and the compressed image (bzImage) by 15%.
+
+Memory Usage
+============
+
+fgkaslr increases the amount of heap that is required at boot time,
+although this extra memory is released when the kernel has finished
+decompression. As a result, it may not be appropriate to use this feature
+on systems without much memory.
+
+Building
+========
+
+To enable fine grained KASLR, you need to have the following config options
+set (including all the ones you would use to build normal KASLR)
+
+``CONFIG_FG_KASLR=y``
+
+fgkaslr for the kernel is only supported for the X86_64 architecture.
+
+Modules
+=======
+
+Modules are randomized similarly to the rest of the kernel by shuffling
+the sections at load time prior to moving them into memory. The module must
+also have been build with the -ffunction-sections compiler option.
+
+Although fgkaslr for the kernel is only supported for the X86_64 architecture,
+it is possible to use fgkaslr with modules on other architectures. To enable
+this feature, select the following config option:
+
+``CONFIG_MODULE_FG_KASLR``
+
+This option is selected automatically for X86_64 when CONFIG_FG_KASLR is set.
+
+Disabling
+=========
+
+Disabling normal kaslr using the nokaslr command line option also disables
+fgkaslr. In addition, it is possible to disable fgkaslr separately by booting
+with "nofgkaslr" on the commandline.
+
+Further Information
+===================
+
+There are a lot of academic papers which explore finer grained ASLR.
+This paper in particular contributed significantly to the implementation design.
+
+Selfrando: Securing the Tor Browser against De-anonymization Exploits,
+M. Conti, S. Crane, T. Frassetto, et al.
+
+For more information on how function layout impacts performance, see:
+
+Optimizing Function Placement for Large-Scale Data-Center Applications,
+G. Ottoni, B. Maher
diff --git a/Documentation/security/index.rst b/Documentation/security/index.rst
index 16335de04e8c..41444124090f 100644
--- a/Documentation/security/index.rst
+++ b/Documentation/security/index.rst
@@ -7,6 +7,7 @@ Security Documentation
credentials
IMA-templates
+ fgkaslr
keys/index
lsm
lsm-development
--
2.33.1
Sometimes it is useful to create a separate section for every
function (symbol in general) to be able then to selectively merge
them back into on or several others. This is how DCE and a part of
LTO work.
Currently, only C functions are in scope and the compilers are able
to do this automatically when `-ffunction-section` is specified.
Add a basic infra for supporting ASM function sections. If any of
the required build options (DCE, LTO, FG-KASLR later) is on and
the target architecture claims it supports them, all ASM functions
and "code" will be placed into separate named sections by default.
This is achieved using --sectname-subst GAS flag which will then
substitute "%S" in a .pushsection or .section directive with the
name of the current section. So,
.section .entry.text # current section is .entry.text
SYM_FUNC_START(foo)
-> .pushsection %S.foo # now the section is .entry.text.foo
do_something
SYM_FUNC_END(foo)
-> .popsection # back to .entry.text
Now the function "foo" is placed into .entry.text.foo and can be
garbage-collected if there are no consumers for it.
Otherwise, the linker script will merge it back into .entry.text.
Since modpost is being run on vmlinux.o, i.e. before the final
linking, expand its okay-list to cover new potential sections
(which will get processed afterwards).
Suggested-by: Peter Zijlstra <[email protected]> # always do, then merge
Suggested-by: Nicolas Pitre <[email protected]> # --sectname-subst flag
Signed-off-by: Alexander Lobakin <[email protected]>
---
Makefile | 18 +++++
arch/Kconfig | 6 ++
include/asm-generic/vmlinux.lds.h | 21 +++---
include/linux/linkage.h | 118 +++++++++++++++++++++++++++++-
init/Kconfig | 11 +++
scripts/mod/modpost.c | 6 +-
6 files changed, 167 insertions(+), 13 deletions(-)
diff --git a/Makefile b/Makefile
index 9dc15c67d132..b921b1fabf70 100644
--- a/Makefile
+++ b/Makefile
@@ -888,6 +888,24 @@ ifeq ($(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)$(CONFIG_LIVEPATCH),yy)
KBUILD_LDFLAGS += -z unique-symbol
endif
+# Allow ASM code to generate separate sections for each function. See
+# `include/linux/linkage.h` for explanation. This flag is to enable GAS to
+# insert the name of the previous section instead of `%S` inside .pushsection
+ifdef CONFIG_HAVE_ASM_FUNCTION_SECTIONS
+ifneq ($(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION)$(CONFIG_LTO_CLANG),)
+SECSUBST_AFLAGS := -Wa,--sectname-subst
+KBUILD_AFLAGS_KERNEL += $(SECSUBST_AFLAGS)
+KBUILD_CFLAGS_KERNEL += $(SECSUBST_AFLAGS)
+export SECSUBST_AFLAGS
+endif
+
+# Same for modules. LD DCE doesn't work for them, thus not checking for it
+ifneq ($(CONFIG_LTO_CLANG),)
+KBUILD_AFLAGS_MODULE += -Wa,--sectname-subst
+KBUILD_CFLAGS_MODULE += -Wa,--sectname-subst
+endif
+endif # CONFIG_HAVE_ASM_FUNCTION_SECTIONS
+
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
LDFLAGS_vmlinux += --gc-sections
diff --git a/arch/Kconfig b/arch/Kconfig
index d3c4ab249e9c..b31a836bc252 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1312,6 +1312,12 @@ config ARCH_HAS_PARANOID_L1D_FLUSH
config DYNAMIC_SIGFRAME
bool
+config ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS
+ bool
+ help
+ An arch should select this if it can be built and run with its
+ ASM functions placed into separate sections to improve DCE and LTO.
+
source "kernel/gcov/Kconfig"
source "scripts/gcc-plugins/Kconfig"
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 42f3866bca69..e7b8a84e0e64 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -84,6 +84,9 @@
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
+/* This is useful for collecting individual sections back into one main */
+#define SECT_WILDCARD(sect) sect sect.[0-9a-zA-Z_]*
+
/*
* LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which
* generates .data.identifier sections, which need to be pulled in with
@@ -97,12 +100,12 @@
* sections to be brought in with rodata.
*/
#if defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) || defined(CONFIG_LTO_CLANG)
-#define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
-#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..L* .data..compoundliteral* .data.$__unnamed_* .data.$L*
-#define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
-#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* .rodata..L*
-#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* .bss..compoundliteral*
-#define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
+#define TEXT_MAIN SECT_WILDCARD(.text)
+#define DATA_MAIN SECT_WILDCARD(.data) .data..L* .data..compoundliteral* .data.$__unnamed_* .data.$L*
+#define SDATA_MAIN SECT_WILDCARD(.sdata)
+#define RODATA_MAIN SECT_WILDCARD(.rodata) .rodata..L*
+#define BSS_MAIN SECT_WILDCARD(.bss) .bss..compoundliteral*
+#define SBSS_MAIN SECT_WILDCARD(.sbss)
#else
#define TEXT_MAIN .text
#define DATA_MAIN .data
@@ -564,7 +567,7 @@
#define NOINSTR_TEXT \
ALIGN_FUNCTION(); \
__noinstr_text_start = .; \
- *(.noinstr.text) \
+ *(SECT_WILDCARD(.noinstr.text)) \
__noinstr_text_end = .;
/*
@@ -621,7 +624,7 @@
#define ENTRY_TEXT \
ALIGN_FUNCTION(); \
__entry_text_start = .; \
- *(.entry.text) \
+ *(SECT_WILDCARD(.entry.text)) \
__entry_text_end = .;
#define IRQENTRY_TEXT \
@@ -643,7 +646,7 @@
__static_call_text_end = .;
/* Section used for early init (in .S files) */
-#define HEAD_TEXT KEEP(*(.head.text))
+#define HEAD_TEXT KEEP(*(SECT_WILDCARD(.head.text)))
#define HEAD_TEXT_SECTION \
.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index dbf8506decca..0c0ddf4429dc 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -73,6 +73,37 @@
#define __ALIGN_STR ".align 4,0x90"
#endif
+/*
+ * Allow ASM symbols to have their own unique sections if they are being
+ * generated by the compiler for C functions (DCE, LTO).
+ */
+#if defined(CONFIG_HAVE_ASM_FUNCTION_SECTIONS) && \
+ ((defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) && !defined(MODULE)) || \
+ (defined(CONFIG_LTO_CLANG)))
+
+#define SYM_PUSH_SECTION(name) \
+ .pushsection %S.name, "ax"
+
+#define SYM_POP_SECTION() \
+ .popsection
+
+#define __ASM_PUSH_SECTION(name) \
+ ".pushsection %S." name ", \"ax\""
+
+#else /* Just .text */
+
+#define SYM_PUSH_SECTION(name)
+#define SYM_POP_SECTION()
+#define __ASM_PUSH_SECTION(name)
+
+#endif /* Just .text */
+
+#define ASM_PUSH_SECTION(name) \
+ __ASM_PUSH_SECTION(__stringify(name))
+
+#define ASM_POP_SECTION() \
+ __stringify(SYM_POP_SECTION())
+
#ifdef __ASSEMBLY__
/* SYM_T_FUNC -- type used by assembler to mark functions */
@@ -209,6 +240,15 @@
SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
#endif
+/*
+ * SYM_FUNC_START_WEAK -- use where there are two global names for one
+ * function, and one of them is weak
+ */
+#ifndef SYM_FUNC_START_WEAK_ALIAS
+#define SYM_FUNC_START_WEAK_ALIAS(name) \
+ SYM_START(name, SYM_L_WEAK, SYM_A_ALIGN)
+#endif
+
/*
* SYM_FUNC_START_ALIAS -- use where there are two global names for one
* function
@@ -225,12 +265,24 @@
* later.
*/
#define SYM_FUNC_START(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
+ SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
+#endif
+
+/*
+ * SYM_FUNC_START_SECT -- use for global functions, will be conditionally
+ * placed into a section specified in the second argument
+ */
+#ifndef SYM_FUNC_START_SECT
+#define SYM_FUNC_START_SECT(name, to) \
+ SYM_PUSH_SECTION(to) ASM_NL \
SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
#endif
/* SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment */
#ifndef SYM_FUNC_START_NOALIGN
#define SYM_FUNC_START_NOALIGN(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
#endif
@@ -238,24 +290,38 @@
#ifndef SYM_FUNC_START_LOCAL
/* the same as SYM_FUNC_START_LOCAL_ALIAS, see comment near SYM_FUNC_START */
#define SYM_FUNC_START_LOCAL(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
#endif
/* SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o alignment */
#ifndef SYM_FUNC_START_LOCAL_NOALIGN
#define SYM_FUNC_START_LOCAL_NOALIGN(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
+ SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
+#endif
+
+/*
+ * SYM_FUNC_START_LOCAL_NOALIGN_SECT -- use for local functions, w/o alignment,
+ * will be conditionally placed into a section specified in the second argument
+ */
+#ifndef SYM_FUNC_START_LOCAL_NOALIGN_SECT
+#define SYM_FUNC_START_LOCAL_NOALIGN_SECT(name, to) \
+ SYM_PUSH_SECTION(to) ASM_NL \
SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
#endif
/* SYM_FUNC_START_WEAK -- use for weak functions */
#ifndef SYM_FUNC_START_WEAK
#define SYM_FUNC_START_WEAK(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
SYM_START(name, SYM_L_WEAK, SYM_A_ALIGN)
#endif
/* SYM_FUNC_START_WEAK_NOALIGN -- use for weak functions, w/o alignment */
#ifndef SYM_FUNC_START_WEAK_NOALIGN
#define SYM_FUNC_START_WEAK_NOALIGN(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
SYM_START(name, SYM_L_WEAK, SYM_A_NONE)
#endif
@@ -272,24 +338,59 @@
#ifndef SYM_FUNC_END
/* the same as SYM_FUNC_END_ALIAS, see comment near SYM_FUNC_START */
#define SYM_FUNC_END(name) \
- SYM_END(name, SYM_T_FUNC)
+ SYM_END(name, SYM_T_FUNC) ASM_NL \
+ SYM_POP_SECTION()
#endif
/* SYM_CODE_START -- use for non-C (special) functions */
#ifndef SYM_CODE_START
#define SYM_CODE_START(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
+ SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
+#endif
+
+/*
+ * SYM_CODE_START_SECT -- use for non-C (special) functions, will be
+ * conditionally placed into a section specified in the second argument
+ */
+#ifndef SYM_CODE_START_SECT
+#define SYM_CODE_START_SECT(name, to) \
+ SYM_PUSH_SECTION(to) ASM_NL \
SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
#endif
/* SYM_CODE_START_NOALIGN -- use for non-C (special) functions, w/o alignment */
#ifndef SYM_CODE_START_NOALIGN
#define SYM_CODE_START_NOALIGN(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
+ SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
+#endif
+
+/*
+ * SYM_CODE_START_NOALIGN_SECT -- use for non-C (special) functions,
+ * w/o alignment, will be conditionally placed into a section specified
+ * in the second argument
+ */
+#ifndef SYM_CODE_START_NOALIGN_SECT
+#define SYM_CODE_START_NOALIGN_SECT(name, to) \
+ SYM_PUSH_SECTION(to) ASM_NL \
SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
#endif
/* SYM_CODE_START_LOCAL -- use for local non-C (special) functions */
#ifndef SYM_CODE_START_LOCAL
#define SYM_CODE_START_LOCAL(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
+ SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
+#endif
+
+/*
+ * SYM_CODE_START_LOCAL -- use for local non-C (special) functions, will
+ * be conditionally placing into a section specified in the second argument
+ */
+#ifndef SYM_CODE_START_LOCAL_SECT
+#define SYM_CODE_START_LOCAL_SECT(name, to) \
+ SYM_PUSH_SECTION(to) ASM_NL \
SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
#endif
@@ -299,13 +400,26 @@
*/
#ifndef SYM_CODE_START_LOCAL_NOALIGN
#define SYM_CODE_START_LOCAL_NOALIGN(name) \
+ SYM_PUSH_SECTION(name) ASM_NL \
+ SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
+#endif
+
+/*
+ * SYM_CODE_START_LOCAL_NOALIGN_SECT -- use for local non-C (special)
+ * functions, w/o alignment, will be conditionally placed into a section
+ * specified in the second argument
+ */
+#ifndef SYM_CODE_START_LOCAL_NOALIGN_SECT
+#define SYM_CODE_START_LOCAL_NOALIGN_SECT(name, to) \
+ SYM_PUSH_SECTION(to) ASM_NL \
SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
#endif
/* SYM_CODE_END -- the end of SYM_CODE_START_LOCAL, SYM_CODE_START, ... */
#ifndef SYM_CODE_END
#define SYM_CODE_END(name) \
- SYM_END(name, SYM_T_NONE)
+ SYM_END(name, SYM_T_NONE) ASM_NL \
+ SYM_POP_SECTION()
#endif
/* === data annotations === */
diff --git a/init/Kconfig b/init/Kconfig
index 37926d19a74a..3babc0aeac61 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1386,6 +1386,17 @@ config CC_OPTIMIZE_FOR_SIZE
endchoice
+config HAVE_ASM_FUNCTION_SECTIONS
+ depends on ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS
+ depends on $(cc-option,-Wa$(comma)--sectname-subst)
+ def_bool y
+ help
+ This enables ASM function sections if both architecture
+ and toolchain supports that. It allows creating a separate
+ .text section for each ASM function in order to improve
+ DCE and LTO (works the same way as -ffunction-sections for
+ C code).
+
config HAVE_LD_DEAD_CODE_DATA_ELIMINATION
bool
help
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index f39cc73a082c..a6e9e75ff3e5 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -960,7 +960,9 @@ static void check_section(const char *modname, struct elf_info *elf,
".kprobes.text", ".cpuidle.text", ".noinstr.text"
#define OTHER_TEXT_SECTIONS ".ref.text", ".head.text", ".spinlock.text", \
".fixup", ".entry.text", ".exception.text", ".text.*", \
- ".coldtext", ".softirqentry.text"
+ ".coldtext", ".softirqentry.text", ".text.unlikely.*", \
+ ".noinstr.text.*", ".head.text.*", ".fixup.*", \
+ ".entry.text.*"
#define INIT_SECTIONS ".init.*"
#define MEM_INIT_SECTIONS ".meminit.*"
@@ -1041,7 +1043,7 @@ enum mismatch {
struct sectioncheck {
const char *fromsec[20];
const char *bad_tosec[20];
- const char *good_tosec[20];
+ const char *good_tosec[25];
enum mismatch mismatch;
const char *symbol_white_list[20];
void (*handler)(const char *modname, struct elf_info *elf,
--
2.33.1
Add an entry for FG-KASLR containing the maintainers, reviewers,
public mailing lists, files and so on.
Signed-off-by: Alexander Lobakin <[email protected]>
---
MAINTAINERS | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8912b2c1260c..efdb313b6813 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7853,6 +7853,18 @@ L: [email protected]
S: Maintained
F: drivers/platform/x86/fujitsu-tablet.c
+FUNCTION-GRAINED KASLR (FG-KASLR)
+M: Alexander Lobakin <[email protected]>
+R: Kristen Carlson Accardi <[email protected]>
+R: Kees Cook <[email protected]>
+L: [email protected]
+S: Supported
+F: Documentation/security/fgkaslr.rst
+F: arch/x86/boot/compressed/fgkaslr.c
+F: arch/x86/boot/compressed/gen-symbols.h
+F: arch/x86/boot/compressed/utils.c
+F: scripts/generate_text_sections.pl
+
FUSE: FILESYSTEM IN USERSPACE
M: Miklos Szeredi <[email protected]>
L: [email protected]
--
2.33.1
From: Kristen Carlson Accardi <[email protected]>
Introduce a new config option to allow modules to be re-ordered
by function. This option can be enabled independently of the
kernel text KASLR or FG_KASLR settings so that it can be used
by architectures that do not support either of these features.
This option will be selected by default if CONFIG_FG_KASLR is
selected.
If a module has functions split out into separate text sections
(i.e. compiled with the -ffunction-sections flag), reorder the
functions to provide some code diversification to modules.
alobakin:
Make it work with ClangCFI -- in such builds, .text section must
always come first and be page-aligned. Exclude it from the shuffle
list and leave as it is.
Make this feature depend on `-z unique-symbol` as well, due to the
very same reasons.
Traditionally, use common shuffle_array() from <linux/random.h>.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Tested-by: Tony Luck <[email protected]>
Acked-by: Jessica Yu <[email protected]>
Tested-by: Jessica Yu <[email protected]>
Reported-by: kernel test robot <[email protected]> # swap.cocci
Co-developed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
---
Makefile | 6 +++-
include/linux/linkage.h | 1 +
init/Kconfig | 14 ++++++++
kernel/module.c | 73 +++++++++++++++++++++++++++++++++++++++--
4 files changed, 91 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 3346269341d4..74d270c77d96 100644
--- a/Makefile
+++ b/Makefile
@@ -900,7 +900,7 @@ export SECSUBST_AFLAGS
endif
# Same for modules. LD DCE doesn't work for them, thus not checking for it
-ifneq ($(CONFIG_LTO_CLANG),)
+ifneq ($(CONFIG_MODULE_FG_KASLR)$(CONFIG_LTO_CLANG),)
KBUILD_AFLAGS_MODULE += -Wa,--sectname-subst
KBUILD_CFLAGS_MODULE += -Wa,--sectname-subst
endif
@@ -909,6 +909,10 @@ endif # CONFIG_HAVE_ASM_FUNCTION_SECTIONS
# ClangLTO implies `-ffunction-sections -fdata-sections`, no need
# to specify them manually and trigger a pointless full rebuild
ifndef CONFIG_LTO_CLANG
+ifdef CONFIG_MODULE_FG_KASLR
+KBUILD_CFLAGS_MODULE += -ffunction-sections
+endif
+
ifneq ($(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION)$(CONFIG_FG_KASLR),)
KBUILD_CFLAGS_KERNEL += -ffunction-sections
endif
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index f3c96fb6a534..deb26069278a 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -80,6 +80,7 @@
#if defined(CONFIG_HAVE_ASM_FUNCTION_SECTIONS) && \
((defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) && !defined(MODULE)) || \
(defined(CONFIG_FG_KASLR) && !defined(MODULE)) || \
+ (defined(CONFIG_MODULE_FG_KASLR) && defined(MODULE)) || \
(defined(CONFIG_LTO_CLANG)))
#define SYM_PUSH_SECTION(name) \
diff --git a/init/Kconfig b/init/Kconfig
index 381b063b4925..38c82e21efd7 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2376,6 +2376,20 @@ config UNUSED_KSYMS_WHITELIST
one per line. The path can be absolute, or relative to the kernel
source tree.
+config MODULE_FG_KASLR
+ bool "Module Function Granular Layout Randomization"
+ depends on $(cc-option,-ffunction-sections)
+ depends on LD_HAS_Z_UNIQUE_SYMBOL || !LIVEPATCH
+ default FG_KASLR
+ depends on BROKEN
+ help
+ This option randomizes the module text section by reordering the text
+ section by function at module load time. In order to use this
+ feature, the module must have been compiled with the
+ -ffunction-sections compiler flag.
+
+ If unsure, say N.
+
endif # MODULES
config MODULES_TREE_LOOKUP
diff --git a/kernel/module.c b/kernel/module.c
index 84a9141a5e15..802e1098eaf4 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -57,6 +57,7 @@
#include <linux/bsearch.h>
#include <linux/dynamic_debug.h>
#include <linux/audit.h>
+#include <linux/random.h>
#include <uapi/linux/module.h>
#include "module-internal.h"
@@ -1527,7 +1528,7 @@ static void free_sect_attrs(struct module_sect_attrs *sect_attrs)
for (section = 0; section < sect_attrs->nsections; section++)
kfree(sect_attrs->attrs[section].battr.attr.name);
- kfree(sect_attrs);
+ kvfree(sect_attrs);
}
static void add_sect_attrs(struct module *mod, const struct load_info *info)
@@ -1544,7 +1545,7 @@ static void add_sect_attrs(struct module *mod, const struct load_info *info)
size[0] = ALIGN(struct_size(sect_attrs, attrs, nloaded),
sizeof(sect_attrs->grp.bin_attrs[0]));
size[1] = (nloaded + 1) * sizeof(sect_attrs->grp.bin_attrs[0]);
- sect_attrs = kzalloc(size[0] + size[1], GFP_KERNEL);
+ sect_attrs = kvzalloc(size[0] + size[1], GFP_KERNEL);
if (sect_attrs == NULL)
return;
@@ -2416,6 +2417,71 @@ static bool module_init_layout_section(const char *sname)
return module_init_section(sname);
}
+/*
+ * randomize_text()
+ * Look through the core section looking for executable code sections.
+ * Store sections in an array and then shuffle the sections
+ * to reorder the functions.
+ */
+static void randomize_text(struct module *mod, struct load_info *info)
+{
+ int max_sections = info->hdr->e_shnum;
+ int num_text_sections = 0;
+ Elf_Shdr **text_list;
+ int i, size;
+
+ text_list = kvmalloc_array(max_sections, sizeof(*text_list), GFP_KERNEL);
+ if (!text_list)
+ return;
+
+ for (i = 0; i < max_sections; i++) {
+ Elf_Shdr *shdr = &info->sechdrs[i];
+ const char *sname = info->secstrings + shdr->sh_name;
+
+ if (!(shdr->sh_flags & SHF_ALLOC) ||
+ !(shdr->sh_flags & SHF_EXECINSTR) ||
+ (shdr->sh_flags & ARCH_SHF_SMALL) ||
+ module_init_layout_section(sname))
+ continue;
+
+ /*
+ * With CONFIG_CFI_CLANG, .text with __cfi_check() must come
+ * before any other text sections, and be aligned to PAGE_SIZE.
+ * Don't include it in the shuffle list.
+ */
+ if (IS_ENABLED(CONFIG_CFI_CLANG) && !strcmp(sname, ".text"))
+ continue;
+
+ if (!num_text_sections)
+ size = shdr->sh_entsize;
+
+ text_list[num_text_sections] = shdr;
+ num_text_sections++;
+ }
+
+ if (!num_text_sections)
+ goto exit;
+
+ shuffle_array(text_list, num_text_sections);
+
+ for (i = 0; i < num_text_sections; i++) {
+ Elf_Shdr *shdr = text_list[i];
+
+ /*
+ * get_offset has a section index for it's last
+ * argument, that is only used by arch_mod_section_prepend(),
+ * which is only defined by parisc. Since this type
+ * of randomization isn't supported on parisc, we can
+ * safely pass in zero as the last argument, as it is
+ * ignored.
+ */
+ shdr->sh_entsize = get_offset(mod, &size, shdr, 0);
+ }
+
+exit:
+ kvfree(text_list);
+}
+
/*
* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
* might -- code, read-only data, read-write data, small data. Tally
@@ -2510,6 +2576,9 @@ static void layout_sections(struct module *mod, struct load_info *info)
break;
}
}
+
+ if (IS_ENABLED(CONFIG_MODULE_FG_KASLR))
+ randomize_text(mod, info);
}
static void set_license(struct module *mod, const char *license)
--
2.33.1
From: Alexander Lobakin <[email protected]>
Date: Thu, 23 Dec 2021 01:21:54 +0100
> This is a massive rework and a respin of Kristen Accardi's marvellous
> FG-KASLR series (v5).
[ snip ]
> The series is also available here: [3]
As per request, I've published a version rebased ontop of
linux-next-20211223 here: [4].
During the rebasing, I saw that some ASM code conflicts with, I
guess, Peter's "execute past ret" mitigation.
So I would also like to ask you to give me a branch which I should
pick to base my series on top of. There's a bunch of different x86
branches, like several in peterz-queue, x86/core etc., so I got lost
a little.
The one posted yesterday was based on the mainline 5.16-rc6.
> [0] https://lore.kernel.org/kernel-hardening/[email protected]
> [1] https://lore.kernel.org/kernel-hardening/[email protected]
> [2] https://lore.kernel.org/kernel-hardening/[email protected]
> [3] https://github.com/alobakin/linux/pull/3
[4] https://github.com/alobakin/linux/commits/next-fgkaslr
[ snip ]
Thanks,
Al
On Thu, Dec 23, 2021 at 04:15:04PM +0100, Alexander Lobakin wrote:
> From: Alexander Lobakin <[email protected]>
> Date: Thu, 23 Dec 2021 01:21:54 +0100
>
> > This is a massive rework and a respin of Kristen Accardi's marvellous
> > FG-KASLR series (v5).
>
> [ snip ]
>
> > The series is also available here: [3]
>
> As per request, I've published a version rebased ontop of
> linux-next-20211223 here: [4].
>
> During the rebasing, I saw that some ASM code conflicts with, I
> guess, Peter's "execute past ret" mitigation.
> So I would also like to ask you to give me a branch which I should
> pick to base my series on top of. There's a bunch of different x86
> branches, like several in peterz-queue, x86/core etc., so I got lost
> a little.
> The one posted yesterday was based on the mainline 5.16-rc6.
For anything tip related, tip/master isn't a bad target. I did two asm
related x86 series, both are in tip/x86/core I think (/me checks, yep).
Never base anything of my queue.git, that's all throw-away/staging
stuff. Either it lives and goes on into tip or not :-)
On Thu, Dec 23, 2021 at 01:21:55AM +0100, Alexander Lobakin wrote:
> For now, that condition from remove_dot():
>
> if (m && (s[n + m] == '.' || s[n + m] == 0))
>
> which was designed to test if it's a dot or a \0 after the suffix
> is never satisfied.
> This is due to that s[n + m] always points to the last digit of a
> numeric suffix, not on the symbol next to it:
>
> param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
>
> So it's off by one and was like that since 2014.
What's the relevance of this? Looking at
7d02b490e93c ("Kbuild, lto: Drop .number postfixes in modpost")
what you're fixing here is something LTO-related. How do you trigger
this?
For a Cc:stable patch, I'm missing a lot of context.
> `-z uniq-symbol` linker flag which we are planning to use to
^^
Who's "we"?
> simplify livepatching brings numeric suffixes back, fix this.
> Otherwise:
>
> ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL
>
> Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning")
> Cc: [email protected] # 3.17+
> Signed-off-by: Alexander Lobakin <[email protected]>
...
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Thu, Dec 23, 2021 at 01:21:54AM +0100, Alexander Lobakin wrote:
> This is a massive rework and a respin of Kristen Accardi's marvellous
> FG-KASLR series (v5).
Here would be the place to explain what this series actually does and
why it is marvellous.
From: Borislav Petkov <[email protected]>
Date: Thu, 23 Dec 2021 17:19:06 +0100
> On Thu, Dec 23, 2021 at 01:21:55AM +0100, Alexander Lobakin wrote:
> > For now, that condition from remove_dot():
> >
> > if (m && (s[n + m] == '.' || s[n + m] == 0))
> >
> > which was designed to test if it's a dot or a \0 after the suffix
> > is never satisfied.
> > This is due to that s[n + m] always points to the last digit of a
> > numeric suffix, not on the symbol next to it:
> >
> > param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
> >
> > So it's off by one and was like that since 2014.
>
> What's the relevance of this? Looking at
>
> 7d02b490e93c ("Kbuild, lto: Drop .number postfixes in modpost")
>
> what you're fixing here is something LTO-related. How do you trigger
> this?
It's just a couple lines below. I trigger this using `-z uniq-symbol`
which uses numeric suffixes for globals as well.
>
> For a Cc:stable patch, I'm missing a lot of context.
It fixes a commit dated 2014, thus Cc:stable. Although the
remove_dot() might've been introduced for neverlanded GCC LTO, but
in fact numeric suffixes are used a lot by the toolchains in regular
builds as well. Just not for globals, that's why it's "well hidden".
>
> > `-z uniq-symbol` linker flag which we are planning to use to
> ^^
>
> Who's "we"?
I thought it's a common saying in commit messages, isn't it?
>
> > simplify livepatching brings numeric suffixes back, fix this.
> > Otherwise:
> >
> > ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL
> >
> > Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning")
> > Cc: [email protected] # 3.17+
> > Signed-off-by: Alexander Lobakin <[email protected]>
>
> ...
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
Thanks,
Al
From: Christoph Hellwig <[email protected]>
Date: Thu, 23 Dec 2021 22:38:14 -0800
> On Thu, Dec 23, 2021 at 01:21:54AM +0100, Alexander Lobakin wrote:
> > This is a massive rework and a respin of Kristen Accardi's marvellous
> > FG-KASLR series (v5).
>
> Here would be the place to explain what this series actually does and
> why it is marvellous.
As I took this project over from another developer/team, I decided
to preserve the original cover letter and append it to the end of
mine, as well as to keep most of the original code in the separate
commits from mine.
For sure I could redo this if needed, is it really so?
Thanks,
Al
On Mon, Dec 27, 2021 at 07:22:46PM +0100, Alexander Lobakin wrote:
> It's just a couple lines below. I trigger this using `-z uniq-symbol`
> which uses numeric suffixes for globals as well.
Aha, so that's for the fgkaslr purposes now.
> It fixes a commit dated 2014, thus Cc:stable. Although the
> remove_dot() might've been introduced for neverlanded GCC LTO, but
> in fact numeric suffixes are used a lot by the toolchains in regular
> builds as well. Just not for globals, that's why it's "well hidden".
Does "well hidden" warrant a stable backport then? Because if no
toolchain is using numeric suffixes for globals, then no need for the
stable tag, I'd say.
> I thought it's a common saying in commit messages, isn't it?
Lemme give you my canned and a lot more eloquent explanation for that:
"Please use passive voice in your commit message: no "we" or "I", etc,
and describe your changes in imperative mood.
Also, pls read section "2) Describe your changes" in
Documentation/process/submitting-patches.rst for more details.
Also, see section "Changelog" in
Documentation/process/maintainer-tip.rst
Bottom line is: personal pronouns are ambiguous in text, especially with
so many parties/companies/etc developing the kernel so let's avoid them
please."
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
From: Borislav Petkov <[email protected]>
Date: Mon, 27 Dec 2021 22:26:02 +0100
> On Mon, Dec 27, 2021 at 07:22:46PM +0100, Alexander Lobakin wrote:
> > It's just a couple lines below. I trigger this using `-z uniq-symbol`
> > which uses numeric suffixes for globals as well.
>
> Aha, so that's for the fgkaslr purposes now.
Well, linking using unique names is meant to be used always
when available and livepatching is enabled, at least I hope so.
>
> > It fixes a commit dated 2014, thus Cc:stable. Although the
> > remove_dot() might've been introduced for neverlanded GCC LTO, but
> > in fact numeric suffixes are used a lot by the toolchains in regular
> > builds as well. Just not for globals, that's why it's "well hidden".
>
> Does "well hidden" warrant a stable backport then? Because if no
> toolchain is using numeric suffixes for globals, then no need for the
> stable tag, I'd say.
Hmm, makes sense. The fact that I haven't seen any similar reports
or issues (even on LTO builds) sorta says there are no benefits from
backporting this.
Ok, I'll drop the tag. It's never too late anyway to port this in
case someone will face it.
>
> > I thought it's a common saying in commit messages, isn't it?
>
> Lemme give you my canned and a lot more eloquent explanation for that:
>
> "Please use passive voice in your commit message: no "we" or "I", etc,
> and describe your changes in imperative mood.
>
> Also, pls read section "2) Describe your changes" in
> Documentation/process/submitting-patches.rst for more details.
>
> Also, see section "Changelog" in
> Documentation/process/maintainer-tip.rst
>
> Bottom line is: personal pronouns are ambiguous in text, especially with
> so many parties/companies/etc developing the kernel so let's avoid them
> please."
>
> Thx.
Ah, you're right. "Common used" doesn't mean "correct". I'll fix it
in the next spin being published after accumulating a bunch more
comments.
Thanks!
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
Al
On Mon, Dec 27, 2021 at 07:33:18PM +0100, Alexander Lobakin wrote:
> From: Christoph Hellwig <[email protected]>
> Date: Thu, 23 Dec 2021 22:38:14 -0800
>
> > On Thu, Dec 23, 2021 at 01:21:54AM +0100, Alexander Lobakin wrote:
> > > This is a massive rework and a respin of Kristen Accardi's marvellous
> > > FG-KASLR series (v5).
> >
> > Here would be the place to explain what this series actually does and
> > why it is marvellous.
>
> As I took this project over from another developer/team, I decided
> to preserve the original cover letter and append it to the end of
> mine, as well as to keep most of the original code in the separate
> commits from mine.
> For sure I could redo this if needed, is it really so?
A cover letter needs to explain what you're doing for the reader.
No one is going to page forever to look for that.
On Thu, Dec 23, 2021 at 01:21:56AM +0100, Alexander Lobakin wrote:
> [PATCH v9 02/15] livepatch: use `-z unique-symbol` if available to nuke pos-based search
nuke?
I think you wanna say something about avoiding position-based search if
toolchain supports -z ...
> Position-based search, which means that if we have several symbols
> with the same name, we additionally need to provide an "index" of
> the desired symbol, is fragile. Par exemple, it breaks when two
^^^^^^^^^^^^
We already have hard time with the English in commit messages, let's
avoid the French pls.
> symbols with the same name are located in different sections.
>
> Since a while, LD has a flag `-z unique-symbol` which appends
> numeric suffixes to the functions with the same name (in symtab
> and strtab).
> Check for its availability and always prefer when the livepatching
> is on.
Why only then?
It looks to me like we want this unconditionally, no?
> This needs a little adjustment to the modpost to make it
> strip suffixes before adding exports.
>
> depmod needs some treatment as well, tho its false-positibe warnings
Unknown word [false-positibe] in commit message, suggestions:
['false-positive', 'false-positioned', 'prepositional']
Please introduce a spellchecker into your patch creation workflow.
> about unknown symbols are harmless and don't alter the return code.
> And there is a bunch more livepatch code to optimize-out after
> introducing this, but let's leave it for later.
...
> @@ -171,17 +173,21 @@ static int klp_find_object_symbol(const char *objname, const char *name,
>
> /*
> * Ensure an address was found. If sympos is 0, ensure symbol is unique;
> - * otherwise ensure the symbol position count matches sympos.
> + * otherwise ensure the symbol position count matches sympos. If the LD
> + * `-z unique` flag is enabled, sympos checks are not relevant.
^^^^^^^^^^^
-z unique-symbol
> */
> - if (args.addr == 0)
> + if (args.addr == 0) {
> pr_err("symbol '%s' not found in symbol table\n", name);
> - else if (args.count > 1 && sympos == 0) {
> + } else if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)) {
> + goto out_ok;
This is silly - just do it all here.
> + } else if (args.count > 1 && sympos == 0) {
> pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",
> name, objname);
> } else if (sympos != args.count && sympos > 0) {
> pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",
> sympos, name, objname ? objname : "vmlinux");
> } else {
> +out_ok:
> *addr = args.addr;
> return 0;
> }
Looks straight-forward otherwise but I'm no livepatcher so I'd prefer if
they have a look too.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Thu, Dec 30, 2021 at 3:11 AM Borislav Petkov <[email protected]> wrote:
>
> On Thu, Dec 23, 2021 at 01:21:56AM +0100, Alexander Lobakin wrote:
> > [PATCH v9 02/15] livepatch: use `-z unique-symbol` if available to nuke pos-based search
>
> nuke?
>
> I think you wanna say something about avoiding position-based search if
> toolchain supports -z ...
>
> > Position-based search, which means that if we have several symbols
> > with the same name, we additionally need to provide an "index" of
> > the desired symbol, is fragile. Par exemple, it breaks when two
> ^^^^^^^^^^^^
>
> We already have hard time with the English in commit messages, let's
> avoid the French pls.
>
> > symbols with the same name are located in different sections.
> >
> > Since a while, LD has a flag `-z unique-symbol` which appends
> > numeric suffixes to the functions with the same name (in symtab
> > and strtab).
> > Check for its availability and always prefer when the livepatching
> > is on.
>
> Why only then?
>
> It looks to me like we want this unconditionally, no?
>
> > This needs a little adjustment to the modpost to make it
> > strip suffixes before adding exports.
> >
> > depmod needs some treatment as well, tho its false-positibe warnings
>
> Unknown word [false-positibe] in commit message, suggestions:
> ['false-positive', 'false-positioned', 'prepositional']
>
> Please introduce a spellchecker into your patch creation workflow.
>
> > about unknown symbols are harmless and don't alter the return code.
> > And there is a bunch more livepatch code to optimize-out after
> > introducing this, but let's leave it for later.
>
> ...
>
> > @@ -171,17 +173,21 @@ static int klp_find_object_symbol(const char *objname, const char *name,
> >
> > /*
> > * Ensure an address was found. If sympos is 0, ensure symbol is unique;
> > - * otherwise ensure the symbol position count matches sympos.
> > + * otherwise ensure the symbol position count matches sympos. If the LD
> > + * `-z unique` flag is enabled, sympos checks are not relevant.
> ^^^^^^^^^^^
>
> -z unique-symbol
>
> > */
> > - if (args.addr == 0)
> > + if (args.addr == 0) {
> > pr_err("symbol '%s' not found in symbol table\n", name);
> > - else if (args.count > 1 && sympos == 0) {
> > + } else if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)) {
> > + goto out_ok;
>
> This is silly - just do it all here.
>
> > + } else if (args.count > 1 && sympos == 0) {
> > pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",
> > name, objname);
> > } else if (sympos != args.count && sympos > 0) {
> > pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",
> > sympos, name, objname ? objname : "vmlinux");
> > } else {
> > +out_ok:
> > *addr = args.addr;
> > return 0;
> > }
>
> Looks straight-forward otherwise but I'm no livepatcher so I'd prefer if
> they have a look too.
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
>
Apologies since I haven't read the patch series.
The option does not exist in ld.lld and I am a bit concerning about
its semantics: https://maskray.me/blog/2020-11-15-explain-gnu-linker-options#z-unique-symbol
I thought that someone forwarded my comments (originally posted months
on a feature request ago) here but seems not.
(I am a ld.lld maintainer.)
On Thu, Dec 23, 2021 at 01:21:57AM +0100, Alexander Lobakin wrote:
> Subject: Re: [PATCH v9 03/15] kallsyms: Hide layout
That title is kinda laconic...
> From: Kristen Carlson Accardi <[email protected]>
>
> This patch makes /proc/kallsyms display in a random order, rather
Avoid having "This patch" or "This commit" in the commit message. It is
tautologically useless.
Also, do
$ git grep 'This patch' Documentation/process
for more details.
> than sorted by address in order to hide the newly randomized address
> layout.
Sorted by address?
My /proc/kallsyms says
$ awk '{ print $1 }' /proc/kallsyms | uniq -c
119086 0000000000000000
so all the addresses are 0. Aha, and when I list them as root, only then
I see non-null addresses.
So why do we that patch at all?
> alobakin:
> Don't depend FG-KASLR and always do that for unpriviledged accesses
Unknown word [unpriviledged] in commit message, suggestions:
['unprivileged', 'underprivileged', 'privileged']
> as suggested by several folks.
> Also, introduce and use a shuffle_array() macro which shuffles an
> array using Fisher-Yates.
Fisher-Yates what?
/me goes and looks at the wikipedia article.
Aha, a Fisher-Yates shuffle algoithm.
Don't be afraid to explain more in your commit messages and make them
more reader-friendly.
> We'll make use of it several more times
> later on.
Not important for this commit.
...
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Thu, 23 Dec 2021, Alexander Lobakin wrote:
> For now, that condition from remove_dot():
>
> if (m && (s[n + m] == '.' || s[n + m] == 0))
>
> which was designed to test if it's a dot or a \0 after the suffix
> is never satisfied.
> This is due to that s[n + m] always points to the last digit of a
> numeric suffix, not on the symbol next to it:
>
> param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'
>
> So it's off by one and was like that since 2014.
>
> `-z uniq-symbol` linker flag which we are planning to use to
`-z unique-symbol`
Miroslav
> --- a/kernel/livepatch/core.c
> +++ b/kernel/livepatch/core.c
> @@ -143,11 +143,13 @@ static int klp_find_callback(void *data, const char *name,
> args->count++;
>
> /*
> - * Finish the search when the symbol is found for the desired position
> - * or the position is not defined for a non-unique symbol.
> + * Finish the search when unique symbol names are enabled
> + * or the symbol is found for the desired position or the
> + * position is not defined for a non-unique symbol.
> */
> - if ((args->pos && (args->count == args->pos)) ||
> - (!args->pos && (args->count > 1)))
> + if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL) ||
> + (args->pos && args->count == args->pos) ||
> + (!args->pos && args->count > 1))
> return 1;
>
> return 0;
> @@ -171,17 +173,21 @@ static int klp_find_object_symbol(const char *objname, const char *name,
>
> /*
> * Ensure an address was found. If sympos is 0, ensure symbol is unique;
> - * otherwise ensure the symbol position count matches sympos.
> + * otherwise ensure the symbol position count matches sympos. If the LD
> + * `-z unique` flag is enabled, sympos checks are not relevant.
> */
> - if (args.addr == 0)
> + if (args.addr == 0) {
> pr_err("symbol '%s' not found in symbol table\n", name);
> - else if (args.count > 1 && sympos == 0) {
> + } else if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)) {
> + goto out_ok;
> + } else if (args.count > 1 && sympos == 0) {
> pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",
> name, objname);
> } else if (sympos != args.count && sympos > 0) {
> pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",
> sympos, name, objname ? objname : "vmlinux");
> } else {
> +out_ok:
> *addr = args.addr;
> return 0;
> }
I think it would be better to return to something like
if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL))
sympos = 0;
in klp_find_object_symbol() just after kallsyms search is performed.
You would not need the above changes at all. I did not like it before when
sympos clearing was proposed, but the situation was different back then.
'-z unique-symbol' was not available. It has changed and we have a
guarantee that symbols are unique now. There would not be any impact on
the user.
What do you think?
Miroslav
On Thu, 30 Dec 2021, Fāng-ruì Sòng wrote:
> On Thu, Dec 30, 2021 at 3:11 AM Borislav Petkov <[email protected]> wrote:
> >
> > On Thu, Dec 23, 2021 at 01:21:56AM +0100, Alexander Lobakin wrote:
> > > [PATCH v9 02/15] livepatch: use `-z unique-symbol` if available to nuke pos-based search
...
> Apologies since I haven't read the patch series.
>
> The option does not exist in ld.lld and I am a bit concerning about
> its semantics: https://maskray.me/blog/2020-11-15-explain-gnu-linker-options#z-unique-symbol
>
> I thought that someone forwarded my comments (originally posted months
> on a feature request ago) here but seems not.
> (I am a ld.lld maintainer.)
Do you mean
https://lore.kernel.org/all/[email protected]/T/#u
?
Unfortunately, it did not lead anywhere. I think that '-z unique-symbol'
option should work fine as long as the live patching is concerned. Maybe I
misunderstood but your concerns mentioned at the blog do not apply. The
stability is not an issue for us since we (KLP) always work with already
built and fixed kernel. And(at least) GCC already uses number suffices for
IPA clones and it has not been a problem anywhere.
Am I wrong?
Thanks
Miroslav
From: Borislav Petkov <[email protected]>
Date: Thu, 30 Dec 2021 23:36:00 +0100
> On Thu, Dec 23, 2021 at 01:21:57AM +0100, Alexander Lobakin wrote:
> > Subject: Re: [PATCH v9 03/15] kallsyms: Hide layout
>
> That title is kinda laconic...
"kallsyms: randomize /proc/kallsyms output order"?
>
> > From: Kristen Carlson Accardi <[email protected]>
> >
> > This patch makes /proc/kallsyms display in a random order, rather
>
> Avoid having "This patch" or "This commit" in the commit message. It is
> tautologically useless.
>
> Also, do
>
> $ git grep 'This patch' Documentation/process
>
> for more details.
Goes straight from the original series. Worth changing anyways.
>
> > than sorted by address in order to hide the newly randomized address
> > layout.
>
> Sorted by address?
>
> My /proc/kallsyms says
>
> $ awk '{ print $1 }' /proc/kallsyms | uniq -c
> 119086 0000000000000000
>
> so all the addresses are 0. Aha, and when I list them as root, only then
> I see non-null addresses.
>
> So why do we that patch at all?
It displays zeros for non-roots, but the symbols are still sorted by
their addresses. As a result, if you leak one address, you could
determine some others.
This is especially critical with FG-KASLR as its text layout is
random each time and sorted /proc/kallsyms would make the entire
feature useless.
>
> > alobakin:
> > Don't depend FG-KASLR and always do that for unpriviledged accesses
>
> Unknown word [unpriviledged] in commit message, suggestions:
> ['unprivileged', 'underprivileged', 'privileged']
I either have some problems with checkpatch + codespell, or they
missed all that typos you're noticing. Thanks, and apologies =\
>
> > as suggested by several folks.
> > Also, introduce and use a shuffle_array() macro which shuffles an
> > array using Fisher-Yates.
>
> Fisher-Yates what?
>
> /me goes and looks at the wikipedia article.
>
> Aha, a Fisher-Yates shuffle algoithm.
>
> Don't be afraid to explain more in your commit messages and make them
> more reader-friendly.
Sure.
This patch initially was at the tail of the set, after the commits
where this algo is mentioned several times in a more detailed
manner, but I moved it to the head then as the requests for doing
this unconditionally converted it to a pre-requisite.
>
> > We'll make use of it several more times
> > later on.
>
> Not important for this commit.
>
> ...
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
Thanks!
Al
From: Miroslav Benes <[email protected]>
Date: Mon, 3 Jan 2022 14:55:42 +0100 (CET)
> On Thu, 30 Dec 2021, Fāng-ruì Sòng wrote:
>
> > On Thu, Dec 30, 2021 at 3:11 AM Borislav Petkov <[email protected]> wrote:
> > >
> > > On Thu, Dec 23, 2021 at 01:21:56AM +0100, Alexander Lobakin wrote:
> > > > [PATCH v9 02/15] livepatch: use `-z unique-symbol` if available to nuke pos-based search
>
> ...
>
> > Apologies since I haven't read the patch series.
> >
> > The option does not exist in ld.lld and I am a bit concerning about
> > its semantics: https://maskray.me/blog/2020-11-15-explain-gnu-linker-options#z-unique-symbol
> >
> > I thought that someone forwarded my comments (originally posted months
> > on a feature request ago) here but seems not.
> > (I am a ld.lld maintainer.)
>
> Do you mean
> https://lore.kernel.org/all/[email protected]/T/#u
> ?
>
> Unfortunately, it did not lead anywhere. I think that '-z unique-symbol'
> option should work fine as long as the live patching is concerned. Maybe I
> misunderstood but your concerns mentioned at the blog do not apply. The
> stability is not an issue for us since we (KLP) always work with already
> built and fixed kernel. And(at least) GCC already uses number suffices for
> IPA clones and it has not been a problem anywhere.
LLD doesn't have such an option, so FG-KASLR + livepatching builds
wouldn't be available for LLVM with the current approach (or we'd
still need a stub that prints "FG-KASLR is not compatible with
sympos != 0").
Unfortunately, I discovered this a bit late, just after sending this
revision.
OTOH, there's no easy alternative. <file + function> pair looks
appealing, but is it even possible for now to implement in the
kernel without much refactoring?
>
> Am I wrong?
>
> Thanks
>
> Miroslav
Thanks,
Al
From: Borislav Petkov <[email protected]>
Date: Thu, 30 Dec 2021 12:10:33 +0100
> On Thu, Dec 23, 2021 at 01:21:56AM +0100, Alexander Lobakin wrote:
> > [PATCH v9 02/15] livepatch: use `-z unique-symbol` if available to nuke pos-based search
>
> nuke?
>
> I think you wanna say something about avoiding position-based search if
> toolchain supports -z ...
Correct. A "vocabulary fail" moment.
>
> > Position-based search, which means that if we have several symbols
> > with the same name, we additionally need to provide an "index" of
> > the desired symbol, is fragile. Par exemple, it breaks when two
> ^^^^^^^^^^^^
>
> We already have hard time with the English in commit messages, let's
> avoid the French pls.
>
> > symbols with the same name are located in different sections.
> >
> > Since a while, LD has a flag `-z unique-symbol` which appends
> > numeric suffixes to the functions with the same name (in symtab
> > and strtab).
> > Check for its availability and always prefer when the livepatching
> > is on.
>
> Why only then?
>
> It looks to me like we want this unconditionally, no?
To be as least invasive as possible for now. We can turn it on
unconditionally after a while. LLD doesn't support it and this
and there are some different opinions about unique-symbol in
general.
Maybe FG-KASLR builds will reveal that some of the concerns are
true, who knows. It wouldn't need to get turned off back again
then.
>
> > This needs a little adjustment to the modpost to make it
> > strip suffixes before adding exports.
> >
> > depmod needs some treatment as well, tho its false-positibe warnings
>
> Unknown word [false-positibe] in commit message, suggestions:
> ['false-positive', 'false-positioned', 'prepositional']
>
> Please introduce a spellchecker into your patch creation workflow.
It's here, but refused to work this time or so <O> I have definitely
run checkpatch with codespell against the series I can't recall any
reported typos.
>
> > about unknown symbols are harmless and don't alter the return code.
> > And there is a bunch more livepatch code to optimize-out after
> > introducing this, but let's leave it for later.
>
> ...
>
> > @@ -171,17 +173,21 @@ static int klp_find_object_symbol(const char *objname, const char *name,
> >
> > /*
> > * Ensure an address was found. If sympos is 0, ensure symbol is unique;
> > - * otherwise ensure the symbol position count matches sympos.
> > + * otherwise ensure the symbol position count matches sympos. If the LD
> > + * `-z unique` flag is enabled, sympos checks are not relevant.
> ^^^^^^^^^^^
>
> -z unique-symbol
>
> > */
> > - if (args.addr == 0)
> > + if (args.addr == 0) {
> > pr_err("symbol '%s' not found in symbol table\n", name);
> > - else if (args.count > 1 && sympos == 0) {
> > + } else if (IS_ENABLED(CONFIG_LD_HAS_Z_UNIQUE_SYMBOL)) {
> > + goto out_ok;
>
> This is silly - just do it all here.
Yeah, a "big brain" moment from me. Or even reset sympos to 0 when
unique-symbol is enabled, like Mirek suggests.
>
> > + } else if (args.count > 1 && sympos == 0) {
> > pr_err("unresolvable ambiguity for symbol '%s' in object '%s'\n",
> > name, objname);
> > } else if (sympos != args.count && sympos > 0) {
> > pr_err("symbol position %lu for symbol '%s' in object '%s' not found\n",
> > sympos, name, objname ? objname : "vmlinux");
> > } else {
> > +out_ok:
> > *addr = args.addr;
> > return 0;
> > }
>
> Looks straight-forward otherwise but I'm no livepatcher so I'd prefer if
> they have a look too.
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
Thanks,
Al
On Mon, Jan 03, 2022 at 04:40:23PM +0100, Alexander Lobakin wrote:
> "kallsyms: randomize /proc/kallsyms output order"?
Better.
> It displays zeros for non-roots, but the symbols are still sorted by
> their addresses. As a result, if you leak one address, you could
> determine some others.
Because if an attacker has the corresponding vmlinux, he has the offsets
too so, game over?
> This is especially critical with FG-KASLR as its text layout is
> random each time and sorted /proc/kallsyms would make the entire
> feature useless.
Do you notice how exactly this needs to absolutely be in the commit
message? Instead of that "this patch" bla which is more or less obvious.
IOW, always talk about *why* you're doing a change.
> I either have some problems with checkpatch + codespell, or they
> missed all that typos you're noticing. Thanks, and apologies =\
No worries, and thank python's enchant module which I use to spellcheck
stuff.
So lemme look at the actual patch then :)
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On 2022-01-03, Alexander Lobakin wrote:
>From: Miroslav Benes <[email protected]>
>Date: Mon, 3 Jan 2022 14:55:42 +0100 (CET)
>
>> On Thu, 30 Dec 2021, Fāng-ruì Sòng wrote:
>>
>> > On Thu, Dec 30, 2021 at 3:11 AM Borislav Petkov <[email protected]> wrote:
>> > >
>> > > On Thu, Dec 23, 2021 at 01:21:56AM +0100, Alexander Lobakin wrote:
>> > > > [PATCH v9 02/15] livepatch: use `-z unique-symbol` if available to nuke pos-based search
>>
>> ...
>>
>> > Apologies since I haven't read the patch series.
>> >
>> > The option does not exist in ld.lld and I am a bit concerning about
>> > its semantics: https://maskray.me/blog/2020-11-15-explain-gnu-linker-options#z-unique-symbol
>> >
>> > I thought that someone forwarded my comments (originally posted months
>> > on a feature request ago) here but seems not.
>> > (I am a ld.lld maintainer.)
>>
>> Do you mean
>> https://lore.kernel.org/all/[email protected]/T/#u
>> ?
>>
>> Unfortunately, it did not lead anywhere. I think that '-z unique-symbol'
>> option should work fine as long as the live patching is concerned. Maybe I
>> misunderstood but your concerns mentioned at the blog do not apply. The
>> stability is not an issue for us since we (KLP) always work with already
>> built and fixed kernel. And(at least) GCC already uses number suffices for
>> IPA clones and it has not been a problem anywhere.
The stability problem may not happen frequently but is possible if the
compiler performs some IPA with new code.
Such disturbence is probably more likely with LTO or PGO.
For Clang LTO, Makefile currently specifies -mllvm -import-instr-limit=5.
If a function close to the boundary happens to cross the boundary,
if inlined into other translation units, the stability issue may affect
many translation units.
>LLD doesn't have such an option, so FG-KASLR + livepatching builds
>wouldn't be available for LLVM with the current approach (or we'd
>still need a stub that prints "FG-KASLR is not compatible with
>sympos != 0").
>Unfortunately, I discovered this a bit late, just after sending this
>revision.
>
>OTOH, there's no easy alternative. <file + function> pair looks
>appealing, but is it even possible for now to implement in the
>kernel without much refactoring?
<file + symbol> pair looks good to me and will solve the stability problem.
On Thu, Dec 23, 2021 at 01:21:57AM +0100, Alexander Lobakin wrote:
> @@ -687,11 +697,12 @@ static void reset_iter(struct kallsym_iter *iter, loff_t new_pos)
> iter->name[0] = '\0';
> iter->nameoff = get_symbol_offset(new_pos);
> iter->pos = new_pos;
> - if (new_pos == 0) {
if (!iter->show_layout)
return;
> + if (iter->show_layout && new_pos == 0) {
> iter->pos_arch_end = 0;
> iter->pos_mod_end = 0;
> iter->pos_ftrace_mod_end = 0;
> iter->pos_bpf_end = 0;
> + iter->pos_end = 0;
> }
> }
...
> @@ -838,16 +860,54 @@ static int kallsyms_open(struct inode *inode, struct file *file)
> * using get_symbol_offset for every symbol.
> */
> struct kallsym_iter *iter;
> - iter = __seq_open_private(file, &kallsyms_op, sizeof(*iter));
> - if (!iter)
> - return -ENOMEM;
> - reset_iter(iter, 0);
> + /*
> + * This fake iter is needed for the cases with unprivileged
> + * access. We need to know the exact number of symbols to
> + * randomize the display layout.
> + */
> + struct kallsym_iter fake;
> + size_t size = sizeof(*iter);
> + loff_t pos;
> +
> + fake.show_layout = true;
> + reset_iter(&fake, 0);
>
> /*
> * Instead of checking this on every s_show() call, cache
> * the result here at open time.
> */
> - iter->show_value = kallsyms_show_value(file->f_cred);
> + fake.show_layout = kallsyms_show_value(file->f_cred);
> + if (fake.show_layout)
> + goto open;
There are those silly labels again:
if (!fake.show_layout) {
for (... )
;
size = ...
}
iter = __seq_open_private(...
> +
> + for (pos = kallsyms_num_syms; update_iter_mod(&fake, pos); pos++)
> + ;
> +
> + size = struct_size(iter, shuffled_pos, fake.pos_end + 1);
> +
> +open:
> + iter = __seq_open_private(file, &kallsyms_op, size);
> + if (!iter)
> + return -ENOMEM;
> +
> + iter->show_layout = fake.show_layout;
> + reset_iter(iter, 0);
> +
> + if (iter->show_layout)
> + return 0;
> +
> + /* Copy the bounds since they were already discovered above */
> + iter->pos_arch_end = fake.pos_arch_end;
> + iter->pos_mod_end = fake.pos_mod_end;
> + iter->pos_ftrace_mod_end = fake.pos_ftrace_mod_end;
> + iter->pos_bpf_end = fake.pos_bpf_end;
> + iter->pos_end = fake.pos_end;
> +
> + for (pos = 0; pos <= iter->pos_end; pos++)
> + iter->shuffled_pos[pos] = pos;
> +
> + shuffle_array(iter->shuffled_pos, iter->pos_end + 1);
> +
> return 0;
> }
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Thu, Dec 23, 2021 at 01:21:58AM +0100, Alexander Lobakin wrote:
> Sometimes it is useful to create a separate section for every
> function (symbol in general) to be able then to selectively merge
> them back into on or several others. This is how DCE and a part of
^^
"one"
DCE == Dead Code Elimination?
In any case, write it out first please and then use the abbreviation.
> LTO work.
I would've said that too but that one at least has a Kconfig entry which
explains what it is so no need.
/me looks further
Aha there is LD_DEAD_CODE_DATA_ELIMINATION. So connect the two pls.
> Currently, only C functions are in scope
You mean, currently this is done only for C functions? The "in scope"
formulation sounds weird.
> and the compilers are able to do this automatically when
> `-ffunction-section` is specified.
-ffunction-sections, plural.
> Add a basic infra for supporting ASM function sections. If any of
yah s/ASM/asm/g. It's not like it is an acronym or so.
and also, you should explain that "asm function sections" means "put a
function symbol defined in asm, into a separate section".
> the required build options (DCE, LTO, FG-KASLR later) is on and
> the target architecture claims it supports them, all ASM functions
> and "code" will be placed into separate named sections by default.
> This is achieved using --sectname-subst GAS flag which will then
> substitute "%S" in a .pushsection or .section directive with the
Thanks for explaining this. The gas manpage is very, hm, verbose
<sarcarstic eyeroll> ;-\:
" --sectname-subst
Honor substitution sequences in section names.
"
...
> diff --git a/include/linux/linkage.h b/include/linux/linkage.h
> index dbf8506decca..0c0ddf4429dc 100644
> --- a/include/linux/linkage.h
> +++ b/include/linux/linkage.h
> @@ -73,6 +73,37 @@
> #define __ALIGN_STR ".align 4,0x90"
> #endif
>
> +/*
> + * Allow ASM symbols to have their own unique sections if they are being
> + * generated by the compiler for C functions (DCE, LTO).
> + */
> +#if defined(CONFIG_HAVE_ASM_FUNCTION_SECTIONS) && \
> + ((defined(CONFIG_LD_DEAD_CODE_DATA_ELIMINATION) && !defined(MODULE)) || \
> + (defined(CONFIG_LTO_CLANG)))
> +
> +#define SYM_PUSH_SECTION(name) \
> + .pushsection %S.name, "ax"
> +
> +#define SYM_POP_SECTION() \
> + .popsection
> +
> +#define __ASM_PUSH_SECTION(name) \
> + ".pushsection %S." name ", \"ax\""
> +
> +#else /* Just .text */
Just .text?
> +
> +#define SYM_PUSH_SECTION(name)
> +#define SYM_POP_SECTION()
> +#define __ASM_PUSH_SECTION(name)
> +
> +#endif /* Just .text */
> +
> +#define ASM_PUSH_SECTION(name) \
> + __ASM_PUSH_SECTION(__stringify(name))
> +
> +#define ASM_POP_SECTION() \
> + __stringify(SYM_POP_SECTION())
> +
> #ifdef __ASSEMBLY__
>
> /* SYM_T_FUNC -- type used by assembler to mark functions */
> @@ -209,6 +240,15 @@
> SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
> #endif
>
> +/*
> + * SYM_FUNC_START_WEAK -- use where there are two global names for one
SYM_FUNC_START_WEAK_ALIAS
> + * function, and one of them is weak
> + */
> +#ifndef SYM_FUNC_START_WEAK_ALIAS
> +#define SYM_FUNC_START_WEAK_ALIAS(name) \
> + SYM_START(name, SYM_L_WEAK, SYM_A_ALIGN)
> +#endif
> +
> /*
> * SYM_FUNC_START_ALIAS -- use where there are two global names for one
> * function
> @@ -225,12 +265,24 @@
> * later.
> */
> #define SYM_FUNC_START(name) \
> + SYM_PUSH_SECTION(name) ASM_NL \
> + SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
> +#endif
> +
> +/*
> + * SYM_FUNC_START_SECT -- use for global functions, will be conditionally
> + * placed into a section specified in the second argument
> + */
> +#ifndef SYM_FUNC_START_SECT
> +#define SYM_FUNC_START_SECT(name, to) \
(name, sect)
"to" reads kinda unclear what it is supposed to mean.
> + SYM_PUSH_SECTION(to) ASM_NL \
> SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)
> #endif
>
> /* SYM_FUNC_START_NOALIGN -- use for global functions, w/o alignment */
> #ifndef SYM_FUNC_START_NOALIGN
> #define SYM_FUNC_START_NOALIGN(name) \
> + SYM_PUSH_SECTION(name) ASM_NL \
> SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)
> #endif
>
> @@ -238,24 +290,38 @@
> #ifndef SYM_FUNC_START_LOCAL
> /* the same as SYM_FUNC_START_LOCAL_ALIAS, see comment near SYM_FUNC_START */
> #define SYM_FUNC_START_LOCAL(name) \
> + SYM_PUSH_SECTION(name) ASM_NL \
> SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)
> #endif
>
> /* SYM_FUNC_START_LOCAL_NOALIGN -- use for local functions, w/o alignment */
> #ifndef SYM_FUNC_START_LOCAL_NOALIGN
> #define SYM_FUNC_START_LOCAL_NOALIGN(name) \
> + SYM_PUSH_SECTION(name) ASM_NL \
> + SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)
> +#endif
> +
> +/*
> + * SYM_FUNC_START_LOCAL_NOALIGN_SECT -- use for local functions, w/o alignment,
> + * will be conditionally placed into a section specified in the second argument
> + */
> +#ifndef SYM_FUNC_START_LOCAL_NOALIGN_SECT
> +#define SYM_FUNC_START_LOCAL_NOALIGN_SECT(name, to) \
Ditto. And so on below.
...
> diff --git a/init/Kconfig b/init/Kconfig
> index 37926d19a74a..3babc0aeac61 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1386,6 +1386,17 @@ config CC_OPTIMIZE_FOR_SIZE
>
> endchoice
>
> +config HAVE_ASM_FUNCTION_SECTIONS
> + depends on ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS
> + depends on $(cc-option,-Wa$(comma)--sectname-subst)
> + def_bool y
> + help
> + This enables ASM function sections if both architecture
> + and toolchain supports that. It allows creating a separate
"... support it."
> + .text section for each ASM function in order to improve
s/.text // - the section name is specified by the macro arg.
> + DCE and LTO (works the same way as -ffunction-sections for
> + C code).
> +
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Mon, 17 Jan 2022, Borislav Petkov wrote:
> Thanks for explaining this. The gas manpage is very, hm, verbose
> <sarcarstic eyeroll> ;-\:
GNU tools tend to be far better documented in their info pages.
Nicolas
On Mon, Jan 17, 2022 at 04:38:33PM -0500, Nicolas Pitre wrote:
> On Mon, 17 Jan 2022, Borislav Petkov wrote:
>
> > Thanks for explaining this. The gas manpage is very, hm, verbose
> > <sarcarstic eyeroll> ;-\:
>
> GNU tools tend to be far better documented in their info pages.
Good point, the corresponding text in the info page explains this option
properly.
Now I need to remember that about GNU tools.
There are a couple of redirects in that manpage to the info pages "See
the info pages for documentation of ..." but I guess they should slap
something along those lines at the end too:
SEE ALSO
gcc(1), ld(1), and the Info entries for binutils and ld. Also, for
more info on gas options, see the corresponding info pages.
Or so. :-)
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Thu, Dec 23, 2021 at 01:21:59AM +0100, Alexander Lobakin wrote:
> Address places which need special care and enable
> CONFIG_ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS.
>
> Notably:
> - propagate --sectname-subst to aflags in x86/boot/Makefile and
> x86/boot/compressed/Makefile as both override aflags;
s/aflags/KBUILD_AFLAGS/
Let's be more precise pls.
> - symbols starting with a dot (like ".Lbad_gs") should be handled
> manually with SYM_*_START_SECT(.Lbad_gs, bad_gs) as "two dots"
> is a special (and CPP doesn't want to concatenate two dots in
> general);
> - some symbols explicitly need to reside in one section (like
> kexec control code, hibernation page etc.);
> - macros creating aliases for functions (like __memcpy() for
> memcpy() etc.) should go after the main declaration (as
> aliases should be declared in the same section and they
> don't have SYM_PUSH_SECTION() inside);
> - things like ".org", ".align" should be manually pushed to
> the same section the next symbol goes to;
> - expand indirect_thunk and .fixup wildcards in vmlinux.lds.S
$ git grep -E "\.fixup" arch/x86/*.S
$
I guess I'll continue with your new version since a bunch of stuff
has changed in arch/x86/ in the meantime so that that set would need
refreshing.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
From: Borislav Petkov <[email protected]>
Date: Fri, 21 Jan 2022 16:08:17 +0100
> On Thu, Dec 23, 2021 at 01:21:59AM +0100, Alexander Lobakin wrote:
> > Address places which need special care and enable
> > CONFIG_ARCH_SUPPORTS_ASM_FUNCTION_SECTIONS.
> >
> > Notably:
> > - propagate --sectname-subst to aflags in x86/boot/Makefile and
> > x86/boot/compressed/Makefile as both override aflags;
>
> s/aflags/KBUILD_AFLAGS/
>
> Let's be more precise pls.
>
> > - symbols starting with a dot (like ".Lbad_gs") should be handled
> > manually with SYM_*_START_SECT(.Lbad_gs, bad_gs) as "two dots"
> > is a special (and CPP doesn't want to concatenate two dots in
> > general);
> > - some symbols explicitly need to reside in one section (like
> > kexec control code, hibernation page etc.);
> > - macros creating aliases for functions (like __memcpy() for
> > memcpy() etc.) should go after the main declaration (as
> > aliases should be declared in the same section and they
> > don't have SYM_PUSH_SECTION() inside);
> > - things like ".org", ".align" should be manually pushed to
> > the same section the next symbol goes to;
> > - expand indirect_thunk and .fixup wildcards in vmlinux.lds.S
>
> $ git grep -E "\.fixup" arch/x86/*.S
> $
>
> I guess I'll continue with your new version since a bunch of stuff
> has changed in arch/x86/ in the meantime so that that set would need
> refreshing.
Yeah, sure. .fixup usage was removed in particular.
I'll queue v10 soon.
>
> Thx.
>
> --
> Regards/Gruss,
> Boris.
Thanks for the reviews,
Al
>
> https://people.kernel.org/tglx/notes-about-netiquette