2020-05-07 15:14:59

by Grygorii Strashko

Subject: [PATCH v2] ARM: dts: am437x: fix networking on boards with ksz9031 phy

Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") the networking is broken on boards:
am437x-gp-evm
am437x-sk-evm
am437x-idk-evm

All above boards have phy-mode = "rgmii" and this is worked before, because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
KSZ9031 PHY starts handling phy mode properly and disables RX delay, as
result networking is become broken.

Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.

Cc: Oleksij Rempel <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Philippe Schenker <[email protected]>
Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Signed-off-by: Grygorii Strashko <[email protected]>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 811c8cae315b..d692e3b2812a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -943,7 +943,7 @@

&cpsw_emac0 {
phy-handle = <&ethphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-rxid";
};

&elm {
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 9f66f96d09c9..a958f9ee4a5a 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -504,7 +504,7 @@

&cpsw_emac0 {
phy-handle = <&ethphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-rxid";
};

&rtc {
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 25222497f828..4d5a7ca2e25d 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -833,13 +833,13 @@

&cpsw_emac0 {
phy-handle = <&ethphy0>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <1>;
};

&cpsw_emac1 {
phy-handle = <&ethphy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-rxid";
dual_emac_res_vlan = <2>;
};

--
2.17.1

2020-05-07 15:18:19

by Philippe Schenker

Subject: Re: [PATCH v2] ARM: dts: am437x: fix networking on boards with ksz9031 phy

On Thu, 2020-05-07 at 18:12 +0300, Grygorii Strashko wrote:
> Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for
> the
> KSZ9031 PHY") the networking is broken on boards:
> am437x-gp-evm
> am437x-sk-evm
> am437x-idk-evm
>
> All above boards have phy-mode = "rgmii" and this is worked before,
> because
> KSZ9031 PHY started with default RGMII internal delays configuration
> (TX
> off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
> KSZ9031 PHY starts handling phy mode properly and disables RX delay,
> as
> result networking is become broken.
>
> Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
> behavior.
>
> Cc: Oleksij Rempel <[email protected]>
> Cc: Andrew Lunn <[email protected]>
> Cc: Philippe Schenker <[email protected]>
> Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support
> for the KSZ9031 PHY")
> Signed-off-by: Grygorii Strashko <[email protected]>

Reviewed-by: Philippe Schenker <[email protected]>

> ---
> arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
> arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
> arch/arm/boot/dts/am437x-sk-evm.dts | 4 ++--
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts
> b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 811c8cae315b..d692e3b2812a 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -943,7 +943,7 @@
>
> &cpsw_emac0 {
> phy-handle = <&ethphy0>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> };
>
> &elm {
> diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts
> b/arch/arm/boot/dts/am437x-idk-evm.dts
> index 9f66f96d09c9..a958f9ee4a5a 100644
> --- a/arch/arm/boot/dts/am437x-idk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-idk-evm.dts
> @@ -504,7 +504,7 @@
>
> &cpsw_emac0 {
> phy-handle = <&ethphy0>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> };
>
> &rtc {
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts
> b/arch/arm/boot/dts/am437x-sk-evm.dts
> index 25222497f828..4d5a7ca2e25d 100644
> --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -833,13 +833,13 @@
>
> &cpsw_emac0 {
> phy-handle = <&ethphy0>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> dual_emac_res_vlan = <1>;
> };
>
> &cpsw_emac1 {
> phy-handle = <&ethphy1>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-rxid";
> dual_emac_res_vlan = <2>;
> };
>

2020-05-07 17:54:38

by Tony Lindgren

Subject: Re: [PATCH v2] ARM: dts: am437x: fix networking on boards with ksz9031 phy

* Philippe Schenker <[email protected]> [200507 15:17]:
> On Thu, 2020-05-07 at 18:12 +0300, Grygorii Strashko wrote:
> > Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for
> > the
> > KSZ9031 PHY") the networking is broken on boards:
> > am437x-gp-evm
> > am437x-sk-evm
> > am437x-idk-evm
> >
> > All above boards have phy-mode = "rgmii" and this is worked before,
> > because
> > KSZ9031 PHY started with default RGMII internal delays configuration
> > (TX
> > off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the
> > KSZ9031 PHY starts handling phy mode properly and disables RX delay,
> > as
> > result networking is become broken.
> >
> > Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
> > behavior.
> >
> > Cc: Oleksij Rempel <[email protected]>
> > Cc: Andrew Lunn <[email protected]>
> > Cc: Philippe Schenker <[email protected]>
> > Fixes: commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support
> > for the KSZ9031 PHY")
> > Signed-off-by: Grygorii Strashko <[email protected]>
>
> Reviewed-by: Philippe Schenker <[email protected]>

Thanks applying into fixes.

Tony