Changes from v2:
* Remove regulator-enable-ramp-delay for cpu and gpu.
Chukun Pan (1):
arm64: dts: allwinner: h6: Enable CPU opp tables for OrangePi One Plus
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--
2.25.1
Enable CPU opp tables for OrangePi One Plus.
This needs to change the CPU regulator max voltage to fit
the OPP table.
Signed-off-by: Chukun Pan <[email protected]>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index 92745128fcfe..7773c51438ce 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -5,6 +5,7 @@
/dts-v1/;
#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -64,6 +65,10 @@ reg_vcc5v: vcc5v {
};
};
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
&de {
status = "okay";
};
@@ -208,7 +213,7 @@ reg_cldo3: cldo3 {
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
- regulator-max-microvolt = <1080000>;
+ regulator-max-microvolt = <1160000>;
regulator-name = "vdd-cpu";
};
--
2.25.1
On 5/10/22 10:30 AM, Chukun Pan wrote:
> Enable CPU opp tables for OrangePi One Plus.
>
> This needs to change the CPU regulator max voltage to fit
> the OPP table.
>
> Signed-off-by: Chukun Pan <[email protected]>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
> index 92745128fcfe..7773c51438ce 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
Putting the changes in this file also applies them to the OrangePi Lite2 and
OrangePi 3.
Did you test OrangePi Lite2? They both use the same PMIC with a similar
configuration, so it may be safe to assume that what works on OrangePi One Plus
also works there, but I am not sure.
OrangePi 3 already includes the OPP header and these changes, so it is safe but
redundant.
Either these changes need to be made in sun50i-h6-orangepi-one-plus.dts, or we
need to remove the duplicate changes from sun50i-h6-orangepi-3.dts.
Regards,
Samuel
> @@ -5,6 +5,7 @@
> /dts-v1/;
>
> #include "sun50i-h6.dtsi"
> +#include "sun50i-h6-cpu-opp.dtsi"
>
> #include <dt-bindings/gpio/gpio.h>
>
> @@ -64,6 +65,10 @@ reg_vcc5v: vcc5v {
> };
> };
>
> +&cpu0 {
> + cpu-supply = <®_dcdca>;
> +};
> +
> &de {
> status = "okay";
> };
> @@ -208,7 +213,7 @@ reg_cldo3: cldo3 {
> reg_dcdca: dcdca {
> regulator-always-on;
> regulator-min-microvolt = <810000>;
> - regulator-max-microvolt = <1080000>;
> + regulator-max-microvolt = <1160000>;
> regulator-name = "vdd-cpu";
> };
>
>