2024-05-28 20:47:56

by Dmitry Baryshkov

[permalink] [raw]
Subject: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver

The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
the onboard EC. Add glue driver to interface the platform's UCSI
implementation.

Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/usb/typec/ucsi/Kconfig | 9 ++
drivers/usb/typec/ucsi/Makefile | 1 +
drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
3 files changed, 199 insertions(+)

diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
index bdcb1764cfae..680e1b87b152 100644
--- a/drivers/usb/typec/ucsi/Kconfig
+++ b/drivers/usb/typec/ucsi/Kconfig
@@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
To compile the driver as a module, choose M here: the module will be
called ucsi_glink.

+config UCSI_LENOVO_YOGA_C630
+ tristate "UCSI Interface Driver for Lenovo Yoga C630"
+ depends on EC_LENOVO_YOGA_C630
+ help
+ This driver enables UCSI support on the Lenovo Yoga C630 laptop.
+
+ To compile the driver as a module, choose M here: the module will be
+ called ucsi_yoga_c630.
+
endif
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index b4679f94696b..aed41d23887b 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
+obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
new file mode 100644
index 000000000000..ca1ab5c81b87
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2024, Linaro Ltd
+ * Authors:
+ * Bjorn Andersson
+ * Dmitry Baryshkov
+ */
+#include <linux/auxiliary_bus.h>
+#include <linux/module.h>
+#include <linux/platform_data/lenovo-yoga-c630.h>
+
+#include "ucsi.h"
+
+struct yoga_c630_ucsi {
+ struct yoga_c630_ec *ec;
+ struct ucsi *ucsi;
+ struct notifier_block nb;
+ struct completion complete;
+ unsigned long flags;
+#define UCSI_C630_COMMAND_PENDING 0
+#define UCSI_C630_ACK_PENDING 1
+ u16 version;
+};
+
+static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,
+ void *val, size_t val_len)
+{
+ struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
+ u8 buf[YOGA_C630_UCSI_READ_SIZE];
+ int ret;
+
+ ret = yoga_c630_ec_ucsi_read(uec->ec, buf);
+ if (ret)
+ return ret;
+
+ if (offset == UCSI_VERSION) {
+ memcpy(val, &uec->version, min(val_len, sizeof(uec->version)));
+ return 0;
+ }
+
+ if (offset == UCSI_CCI)
+ memcpy(val, buf,
+ min(val_len, YOGA_C630_UCSI_CCI_SIZE));
+ else if (offset == UCSI_MESSAGE_IN)
+ memcpy(val, buf + YOGA_C630_UCSI_CCI_SIZE,
+ min(val_len, YOGA_C630_UCSI_DATA_SIZE));
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+static int yoga_c630_ucsi_async_write(struct ucsi *ucsi, unsigned int offset,
+ const void *val, size_t val_len)
+{
+ struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
+
+ if (offset != UCSI_CONTROL ||
+ val_len != YOGA_C630_UCSI_WRITE_SIZE)
+ return -EINVAL;
+
+ return yoga_c630_ec_ucsi_write(uec->ec, val);
+}
+
+static int yoga_c630_ucsi_sync_write(struct ucsi *ucsi, unsigned int offset,
+ const void *val, size_t val_len)
+{
+ struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
+ bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
+ int ret;
+
+ if (ack)
+ set_bit(UCSI_C630_ACK_PENDING, &uec->flags);
+ else
+ set_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
+
+ reinit_completion(&uec->complete);
+
+ ret = yoga_c630_ucsi_async_write(ucsi, offset, val, val_len);
+ if (ret)
+ goto out_clear_bit;
+
+ if (!wait_for_completion_timeout(&uec->complete, 5 * HZ))
+ ret = -ETIMEDOUT;
+
+out_clear_bit:
+ if (ack)
+ clear_bit(UCSI_C630_ACK_PENDING, &uec->flags);
+ else
+ clear_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
+
+ return ret;
+}
+
+const struct ucsi_operations yoga_c630_ucsi_ops = {
+ .read = yoga_c630_ucsi_read,
+ .sync_write = yoga_c630_ucsi_sync_write,
+ .async_write = yoga_c630_ucsi_async_write,
+};
+
+static int yoga_c630_ucsi_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct yoga_c630_ucsi *uec = container_of(nb, struct yoga_c630_ucsi, nb);
+ u32 cci;
+ int ret;
+
+ if (action == LENOVO_EC_EVENT_USB || action == LENOVO_EC_EVENT_HPD) {
+ ucsi_connector_change(uec->ucsi, 1);
+ return NOTIFY_OK;
+ }
+
+ if (action != LENOVO_EC_EVENT_UCSI)
+ return NOTIFY_DONE;
+
+ ret = uec->ucsi->ops->read(uec->ucsi, UCSI_CCI, &cci, sizeof(cci));
+ if (ret)
+ return NOTIFY_DONE;
+
+ if (UCSI_CCI_CONNECTOR(cci))
+ ucsi_connector_change(uec->ucsi, UCSI_CCI_CONNECTOR(cci));
+
+ if (cci & UCSI_CCI_ACK_COMPLETE &&
+ test_bit(UCSI_C630_ACK_PENDING, &uec->flags))
+ complete(&uec->complete);
+ if (cci & UCSI_CCI_COMMAND_COMPLETE &&
+ test_bit(UCSI_C630_COMMAND_PENDING, &uec->flags))
+ complete(&uec->complete);
+
+ return NOTIFY_OK;
+}
+
+static int yoga_c630_ucsi_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct yoga_c630_ec *ec = adev->dev.platform_data;
+ struct yoga_c630_ucsi *uec;
+ int ret;
+
+ uec = devm_kzalloc(&adev->dev, sizeof(*uec), GFP_KERNEL);
+ if (!uec)
+ return -ENOMEM;
+
+ uec->ec = ec;
+ init_completion(&uec->complete);
+ uec->nb.notifier_call = yoga_c630_ucsi_notify;
+
+ uec->ucsi = ucsi_create(&adev->dev, &yoga_c630_ucsi_ops);
+ if (IS_ERR(uec->ucsi))
+ return PTR_ERR(uec->ucsi);
+
+ ucsi_set_drvdata(uec->ucsi, uec);
+
+ uec->version = yoga_c630_ec_ucsi_get_version(uec->ec);
+
+ auxiliary_set_drvdata(adev, uec);
+
+ ret = yoga_c630_ec_register_notify(ec, &uec->nb);
+ if (ret)
+ return ret;
+
+ return ucsi_register(uec->ucsi);
+}
+
+static void yoga_c630_ucsi_remove(struct auxiliary_device *adev)
+{
+ struct yoga_c630_ucsi *uec = auxiliary_get_drvdata(adev);
+
+ yoga_c630_ec_unregister_notify(uec->ec, &uec->nb);
+ ucsi_unregister(uec->ucsi);
+}
+
+static const struct auxiliary_device_id yoga_c630_ucsi_id_table[] = {
+ { .name = YOGA_C630_MOD_NAME "." YOGA_C630_DEV_UCSI, },
+ {}
+};
+MODULE_DEVICE_TABLE(auxiliary, yoga_c630_ucsi_id_table);
+
+static struct auxiliary_driver yoga_c630_ucsi_driver = {
+ .name = YOGA_C630_DEV_UCSI,
+ .id_table = yoga_c630_ucsi_id_table,
+ .probe = yoga_c630_ucsi_probe,
+ .remove = yoga_c630_ucsi_remove,
+};
+
+module_auxiliary_driver(yoga_c630_ucsi_driver);
+
+MODULE_DESCRIPTION("Lenovo Yoga C630 UCSI");
+MODULE_LICENSE("GPL");

--
2.39.2



2024-05-29 15:23:57

by Dmitry Baryshkov

[permalink] [raw]
Subject: Re: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver

On Wed, 29 May 2024 at 17:20, Ilpo Järvinen
<[email protected]> wrote:
>
> On Tue, 28 May 2024, Dmitry Baryshkov wrote:
>
> > The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
> > the onboard EC. Add glue driver to interface the platform's UCSI
> > implementation.
> >
> > Signed-off-by: Dmitry Baryshkov <[email protected]>
> > ---
> > drivers/usb/typec/ucsi/Kconfig | 9 ++
> > drivers/usb/typec/ucsi/Makefile | 1 +
> > drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
> > 3 files changed, 199 insertions(+)
> >
> > diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> > index bdcb1764cfae..680e1b87b152 100644
> > --- a/drivers/usb/typec/ucsi/Kconfig
> > +++ b/drivers/usb/typec/ucsi/Kconfig
> > @@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
> > To compile the driver as a module, choose M here: the module will be
> > called ucsi_glink.
> >
> > +config UCSI_LENOVO_YOGA_C630
> > + tristate "UCSI Interface Driver for Lenovo Yoga C630"
> > + depends on EC_LENOVO_YOGA_C630
> > + help
> > + This driver enables UCSI support on the Lenovo Yoga C630 laptop.
> > +
> > + To compile the driver as a module, choose M here: the module will be
> > + called ucsi_yoga_c630.
> > +
> > endif
> > diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> > index b4679f94696b..aed41d23887b 100644
> > --- a/drivers/usb/typec/ucsi/Makefile
> > +++ b/drivers/usb/typec/ucsi/Makefile
> > @@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> > obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> > obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> > obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> > +obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> > diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> > new file mode 100644
> > index 000000000000..ca1ab5c81b87
> > --- /dev/null
> > +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> > @@ -0,0 +1,189 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2022-2024, Linaro Ltd
> > + * Authors:
> > + * Bjorn Andersson
> > + * Dmitry Baryshkov
> > + */
> > +#include <linux/auxiliary_bus.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_data/lenovo-yoga-c630.h>
> > +
> > +#include "ucsi.h"
> > +
> > +struct yoga_c630_ucsi {
> > + struct yoga_c630_ec *ec;
> > + struct ucsi *ucsi;
> > + struct notifier_block nb;
> > + struct completion complete;
>
> Add includes for what you used here.
>
> > + unsigned long flags;
> > +#define UCSI_C630_COMMAND_PENDING 0
> > +#define UCSI_C630_ACK_PENDING 1
> > + u16 version;
> > +};
> > +
> > +static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,
>
> extra space
>
> > + void *val, size_t val_len)
> > +{
> > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
>
> Missing include for ucsi_get_drvdata

I'll review my includes, but this comment and the comment for
ucsi_operations are clearly wrong. There is a corresponding include.

>
> > + u8 buf[YOGA_C630_UCSI_READ_SIZE];
> > + int ret;
> > +
> > + ret = yoga_c630_ec_ucsi_read(uec->ec, buf);
> > + if (ret)
> > + return ret;
> > +
> > + if (offset == UCSI_VERSION) {
> > + memcpy(val, &uec->version, min(val_len, sizeof(uec->version)));
> > + return 0;
> > + }
> > +
> > + if (offset == UCSI_CCI)
> > + memcpy(val, buf,
> > + min(val_len, YOGA_C630_UCSI_CCI_SIZE));
>
> Fits to one line.
>
> > + else if (offset == UCSI_MESSAGE_IN)
> > + memcpy(val, buf + YOGA_C630_UCSI_CCI_SIZE,
> > + min(val_len, YOGA_C630_UCSI_DATA_SIZE));
> > + else
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static int yoga_c630_ucsi_async_write(struct ucsi *ucsi, unsigned int offset,
>
> extra space, there seems to be more of them below but I won't mark them.
>
> > + const void *val, size_t val_len)
> > +{
> > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> > +
> > + if (offset != UCSI_CONTROL ||
> > + val_len != YOGA_C630_UCSI_WRITE_SIZE)
> > + return -EINVAL;
> > +
> > + return yoga_c630_ec_ucsi_write(uec->ec, val);
> > +}
> > +
> > +static int yoga_c630_ucsi_sync_write(struct ucsi *ucsi, unsigned int offset,
> > + const void *val, size_t val_len)
> > +{
> > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> > + bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
> > + int ret;
> > +
> > + if (ack)
> > + set_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> > + else
> > + set_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
>
> Include for set_bit()
>
> > + reinit_completion(&uec->complete);
> > +
> > + ret = yoga_c630_ucsi_async_write(ucsi, offset, val, val_len);
> > + if (ret)
> > + goto out_clear_bit;
> > +
> > + if (!wait_for_completion_timeout(&uec->complete, 5 * HZ))
> > + ret = -ETIMEDOUT;
> > +
> > +out_clear_bit:
> > + if (ack)
> > + clear_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> > + else
> > + clear_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> > +
> > + return ret;
> > +}
> > +
> > +const struct ucsi_operations yoga_c630_ucsi_ops = {
>
> Include for ucsi_operations.
>
> > + .read = yoga_c630_ucsi_read,
> > + .sync_write = yoga_c630_ucsi_sync_write,
> > + .async_write = yoga_c630_ucsi_async_write,
> > +};
> > +
> > +static int yoga_c630_ucsi_notify(struct notifier_block *nb,
> > + unsigned long action, void *data)
> > +{
> > + struct yoga_c630_ucsi *uec = container_of(nb, struct yoga_c630_ucsi, nb);
>
> Include for container_of
>
> --
> i.
>


--
With best wishes
Dmitry

2024-05-29 15:42:14

by Bryan O'Donoghue

[permalink] [raw]
Subject: Re: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver

On 28/05/2024 21:44, Dmitry Baryshkov wrote:
> The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
> the onboard EC. Add glue driver to interface the platform's UCSI
> implementation.
>
> Signed-off-by: Dmitry Baryshkov <[email protected]>
> ---
> drivers/usb/typec/ucsi/Kconfig | 9 ++
> drivers/usb/typec/ucsi/Makefile | 1 +
> drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
> 3 files changed, 199 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index bdcb1764cfae..680e1b87b152 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
> To compile the driver as a module, choose M here: the module will be
> called ucsi_glink.
>
> +config UCSI_LENOVO_YOGA_C630
> + tristate "UCSI Interface Driver for Lenovo Yoga C630"
> + depends on EC_LENOVO_YOGA_C630
> + help
> + This driver enables UCSI support on the Lenovo Yoga C630 laptop.
> +
> + To compile the driver as a module, choose M here: the module will be
> + called ucsi_yoga_c630.
> +
> endif
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index b4679f94696b..aed41d23887b 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> +obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> new file mode 100644
> index 000000000000..ca1ab5c81b87
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> @@ -0,0 +1,189 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2024, Linaro Ltd
> + * Authors:
> + * Bjorn Andersson
> + * Dmitry Baryshkov
> + */
> +#include <linux/auxiliary_bus.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/lenovo-yoga-c630.h>
> +
> +#include "ucsi.h"
> +
> +struct yoga_c630_ucsi {
> + struct yoga_c630_ec *ec;
> + struct ucsi *ucsi;
> + struct notifier_block nb;
> + struct completion complete;
> + unsigned long flags;
> +#define UCSI_C630_COMMAND_PENDING 0
> +#define UCSI_C630_ACK_PENDING 1
> + u16 version;
> +};
> +
> +static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,
> + void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> + u8 buf[YOGA_C630_UCSI_READ_SIZE];
> + int ret;
> +
> + ret = yoga_c630_ec_ucsi_read(uec->ec, buf);
> + if (ret)
> + return ret;
> +
> + if (offset == UCSI_VERSION) {
> + memcpy(val, &uec->version, min(val_len, sizeof(uec->version)));
> + return 0;
> + }
> +
> + if (offset == UCSI_CCI)
> + memcpy(val, buf,
> + min(val_len, YOGA_C630_UCSI_CCI_SIZE));
> + else if (offset == UCSI_MESSAGE_IN)
> + memcpy(val, buf + YOGA_C630_UCSI_CCI_SIZE,
> + min(val_len, YOGA_C630_UCSI_DATA_SIZE));

For some reason I believe multi-lines like this, including function
calls that are split over lines should be encapsulated with {}

else if(x) {
memcpy(x,y,
z);
}

If checkpatch doesn't complain about it feel free not to do that though.

> + else
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int yoga_c630_ucsi_async_write(struct ucsi *ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> +
> + if (offset != UCSI_CONTROL ||
> + val_len != YOGA_C630_UCSI_WRITE_SIZE)
> + return -EINVAL;
> +
> + return yoga_c630_ec_ucsi_write(uec->ec, val);
> +}
> +
> +static int yoga_c630_ucsi_sync_write(struct ucsi *ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> + bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
> + int ret;
> +
> + if (ack)
> + set_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> + else
> + set_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> +
> + reinit_completion(&uec->complete);
> +
> + ret = yoga_c630_ucsi_async_write(ucsi, offset, val, val_len);
> + if (ret)
> + goto out_clear_bit;
> +
> + if (!wait_for_completion_timeout(&uec->complete, 5 * HZ))
> + ret = -ETIMEDOUT;
> +
> +out_clear_bit:
> + if (ack)
> + clear_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> + else
> + clear_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> +
> + return ret;
> +}
> +
> +const struct ucsi_operations yoga_c630_ucsi_ops = {
> + .read = yoga_c630_ucsi_read,
> + .sync_write = yoga_c630_ucsi_sync_write,
> + .async_write = yoga_c630_ucsi_async_write,
> +};
> +
> +static int yoga_c630_ucsi_notify(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct yoga_c630_ucsi *uec = container_of(nb, struct yoga_c630_ucsi, nb);
> + u32 cci;
> + int ret;
> +
> + if (action == LENOVO_EC_EVENT_USB || action == LENOVO_EC_EVENT_HPD) {
> + ucsi_connector_change(uec->ucsi, 1);
> + return NOTIFY_OK;
> + }
> +
> + if (action != LENOVO_EC_EVENT_UCSI)
> + return NOTIFY_DONE;

Is this disjunction on action a good candidate for a switch(){}


> +
> + ret = uec->ucsi->ops->read(uec->ucsi, UCSI_CCI, &cci, sizeof(cci));
> + if (ret)
> + return NOTIFY_DONE;
> +
> + if (UCSI_CCI_CONNECTOR(cci))
> + ucsi_connector_change(uec->ucsi, UCSI_CCI_CONNECTOR(cci));
> +
> + if (cci & UCSI_CCI_ACK_COMPLETE &&
> + test_bit(UCSI_C630_ACK_PENDING, &uec->flags))
> + complete(&uec->complete);
> + if (cci & UCSI_CCI_COMMAND_COMPLETE &&
> + test_bit(UCSI_C630_COMMAND_PENDING, &uec->flags))
> + complete(&uec->complete);

IMO these multi-line clauses should end up with a {} around the complete
even though its not required.

Emphasis on the O.

Reviewed-by: Bryan O'Donoghue <[email protected]>

2024-05-29 17:52:33

by Ilpo Järvinen

[permalink] [raw]
Subject: Re: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver

On Wed, 29 May 2024, Dmitry Baryshkov wrote:

> On Wed, 29 May 2024 at 17:20, Ilpo J?rvinen
> <[email protected]> wrote:
> >
> > On Tue, 28 May 2024, Dmitry Baryshkov wrote:
> >
> > > The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
> > > the onboard EC. Add glue driver to interface the platform's UCSI
> > > implementation.
> > >
> > > Signed-off-by: Dmitry Baryshkov <[email protected]>
> > > ---
> > > drivers/usb/typec/ucsi/Kconfig | 9 ++
> > > drivers/usb/typec/ucsi/Makefile | 1 +
> > > drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
> > > 3 files changed, 199 insertions(+)
> > >
> > > diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> > > index bdcb1764cfae..680e1b87b152 100644
> > > --- a/drivers/usb/typec/ucsi/Kconfig
> > > +++ b/drivers/usb/typec/ucsi/Kconfig
> > > @@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
> > > To compile the driver as a module, choose M here: the module will be
> > > called ucsi_glink.
> > >
> > > +config UCSI_LENOVO_YOGA_C630
> > > + tristate "UCSI Interface Driver for Lenovo Yoga C630"
> > > + depends on EC_LENOVO_YOGA_C630
> > > + help
> > > + This driver enables UCSI support on the Lenovo Yoga C630 laptop.
> > > +
> > > + To compile the driver as a module, choose M here: the module will be
> > > + called ucsi_yoga_c630.
> > > +
> > > endif
> > > diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> > > index b4679f94696b..aed41d23887b 100644
> > > --- a/drivers/usb/typec/ucsi/Makefile
> > > +++ b/drivers/usb/typec/ucsi/Makefile
> > > @@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> > > obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> > > obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> > > obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> > > +obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> > > diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> > > new file mode 100644
> > > index 000000000000..ca1ab5c81b87
> > > --- /dev/null
> > > +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> > > @@ -0,0 +1,189 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Copyright (c) 2022-2024, Linaro Ltd
> > > + * Authors:
> > > + * Bjorn Andersson
> > > + * Dmitry Baryshkov
> > > + */
> > > +#include <linux/auxiliary_bus.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_data/lenovo-yoga-c630.h>
> > > +
> > > +#include "ucsi.h"
> > > +
> > > +struct yoga_c630_ucsi {
> > > + struct yoga_c630_ec *ec;
> > > + struct ucsi *ucsi;
> > > + struct notifier_block nb;
> > > + struct completion complete;
> >
> > Add includes for what you used here.
> >
> > > + unsigned long flags;
> > > +#define UCSI_C630_COMMAND_PENDING 0
> > > +#define UCSI_C630_ACK_PENDING 1
> > > + u16 version;
> > > +};
> > > +
> > > +static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,
> >
> > extra space
> >
> > > + void *val, size_t val_len)
> > > +{
> > > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> >
> > Missing include for ucsi_get_drvdata
>
> I'll review my includes, but this comment and the comment for
> ucsi_operations are clearly wrong. There is a corresponding include.

Ah, sorry about that. I completely missed there was that local include.

--
i.

2024-05-29 21:17:47

by Ilpo Järvinen

[permalink] [raw]
Subject: Re: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver

On Tue, 28 May 2024, Dmitry Baryshkov wrote:

> The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
> the onboard EC. Add glue driver to interface the platform's UCSI
> implementation.
>
> Signed-off-by: Dmitry Baryshkov <[email protected]>
> ---
> drivers/usb/typec/ucsi/Kconfig | 9 ++
> drivers/usb/typec/ucsi/Makefile | 1 +
> drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
> 3 files changed, 199 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index bdcb1764cfae..680e1b87b152 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
> To compile the driver as a module, choose M here: the module will be
> called ucsi_glink.
>
> +config UCSI_LENOVO_YOGA_C630
> + tristate "UCSI Interface Driver for Lenovo Yoga C630"
> + depends on EC_LENOVO_YOGA_C630
> + help
> + This driver enables UCSI support on the Lenovo Yoga C630 laptop.
> +
> + To compile the driver as a module, choose M here: the module will be
> + called ucsi_yoga_c630.
> +
> endif
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index b4679f94696b..aed41d23887b 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> +obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> new file mode 100644
> index 000000000000..ca1ab5c81b87
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> @@ -0,0 +1,189 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2024, Linaro Ltd
> + * Authors:
> + * Bjorn Andersson
> + * Dmitry Baryshkov
> + */
> +#include <linux/auxiliary_bus.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/lenovo-yoga-c630.h>
> +
> +#include "ucsi.h"
> +
> +struct yoga_c630_ucsi {
> + struct yoga_c630_ec *ec;
> + struct ucsi *ucsi;
> + struct notifier_block nb;
> + struct completion complete;

Add includes for what you used here.

> + unsigned long flags;
> +#define UCSI_C630_COMMAND_PENDING 0
> +#define UCSI_C630_ACK_PENDING 1
> + u16 version;
> +};
> +
> +static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,

extra space

> + void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);

Missing include for ucsi_get_drvdata

> + u8 buf[YOGA_C630_UCSI_READ_SIZE];
> + int ret;
> +
> + ret = yoga_c630_ec_ucsi_read(uec->ec, buf);
> + if (ret)
> + return ret;
> +
> + if (offset == UCSI_VERSION) {
> + memcpy(val, &uec->version, min(val_len, sizeof(uec->version)));
> + return 0;
> + }
> +
> + if (offset == UCSI_CCI)
> + memcpy(val, buf,
> + min(val_len, YOGA_C630_UCSI_CCI_SIZE));

Fits to one line.

> + else if (offset == UCSI_MESSAGE_IN)
> + memcpy(val, buf + YOGA_C630_UCSI_CCI_SIZE,
> + min(val_len, YOGA_C630_UCSI_DATA_SIZE));
> + else
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int yoga_c630_ucsi_async_write(struct ucsi *ucsi, unsigned int offset,

extra space, there seems to be more of them below but I won't mark them.

> + const void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> +
> + if (offset != UCSI_CONTROL ||
> + val_len != YOGA_C630_UCSI_WRITE_SIZE)
> + return -EINVAL;
> +
> + return yoga_c630_ec_ucsi_write(uec->ec, val);
> +}
> +
> +static int yoga_c630_ucsi_sync_write(struct ucsi *ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> + bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
> + int ret;
> +
> + if (ack)
> + set_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> + else
> + set_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);

Include for set_bit()

> + reinit_completion(&uec->complete);
> +
> + ret = yoga_c630_ucsi_async_write(ucsi, offset, val, val_len);
> + if (ret)
> + goto out_clear_bit;
> +
> + if (!wait_for_completion_timeout(&uec->complete, 5 * HZ))
> + ret = -ETIMEDOUT;
> +
> +out_clear_bit:
> + if (ack)
> + clear_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> + else
> + clear_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> +
> + return ret;
> +}
> +
> +const struct ucsi_operations yoga_c630_ucsi_ops = {

Include for ucsi_operations.

> + .read = yoga_c630_ucsi_read,
> + .sync_write = yoga_c630_ucsi_sync_write,
> + .async_write = yoga_c630_ucsi_async_write,
> +};
> +
> +static int yoga_c630_ucsi_notify(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct yoga_c630_ucsi *uec = container_of(nb, struct yoga_c630_ucsi, nb);

Include for container_of

--
i.


2024-05-31 00:30:49

by Dmitry Baryshkov

[permalink] [raw]
Subject: Re: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver

On Wed, May 29, 2024 at 04:41:40PM +0100, Bryan O'Donoghue wrote:
> On 28/05/2024 21:44, Dmitry Baryshkov wrote:
> > The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
> > the onboard EC. Add glue driver to interface the platform's UCSI
> > implementation.
> >
> > Signed-off-by: Dmitry Baryshkov <[email protected]>
> > ---
> > drivers/usb/typec/ucsi/Kconfig | 9 ++
> > drivers/usb/typec/ucsi/Makefile | 1 +
> > drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
> > 3 files changed, 199 insertions(+)
> >
> > diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> > index bdcb1764cfae..680e1b87b152 100644
> > --- a/drivers/usb/typec/ucsi/Kconfig
> > +++ b/drivers/usb/typec/ucsi/Kconfig
> > @@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
> > To compile the driver as a module, choose M here: the module will be
> > called ucsi_glink.
> > +config UCSI_LENOVO_YOGA_C630
> > + tristate "UCSI Interface Driver for Lenovo Yoga C630"
> > + depends on EC_LENOVO_YOGA_C630
> > + help
> > + This driver enables UCSI support on the Lenovo Yoga C630 laptop.
> > +
> > + To compile the driver as a module, choose M here: the module will be
> > + called ucsi_yoga_c630.
> > +
> > endif
> > diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> > index b4679f94696b..aed41d23887b 100644
> > --- a/drivers/usb/typec/ucsi/Makefile
> > +++ b/drivers/usb/typec/ucsi/Makefile
> > @@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> > obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> > obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> > obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> > +obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> > diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> > new file mode 100644
> > index 000000000000..ca1ab5c81b87
> > --- /dev/null
> > +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> > @@ -0,0 +1,189 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2022-2024, Linaro Ltd
> > + * Authors:
> > + * Bjorn Andersson
> > + * Dmitry Baryshkov
> > + */
> > +#include <linux/auxiliary_bus.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_data/lenovo-yoga-c630.h>
> > +
> > +#include "ucsi.h"
> > +
> > +struct yoga_c630_ucsi {
> > + struct yoga_c630_ec *ec;
> > + struct ucsi *ucsi;
> > + struct notifier_block nb;
> > + struct completion complete;
> > + unsigned long flags;
> > +#define UCSI_C630_COMMAND_PENDING 0
> > +#define UCSI_C630_ACK_PENDING 1
> > + u16 version;
> > +};
> > +
> > +static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,
> > + void *val, size_t val_len)
> > +{
> > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> > + u8 buf[YOGA_C630_UCSI_READ_SIZE];
> > + int ret;
> > +
> > + ret = yoga_c630_ec_ucsi_read(uec->ec, buf);
> > + if (ret)
> > + return ret;
> > +
> > + if (offset == UCSI_VERSION) {
> > + memcpy(val, &uec->version, min(val_len, sizeof(uec->version)));
> > + return 0;
> > + }
> > +
> > + if (offset == UCSI_CCI)
> > + memcpy(val, buf,
> > + min(val_len, YOGA_C630_UCSI_CCI_SIZE));
> > + else if (offset == UCSI_MESSAGE_IN)
> > + memcpy(val, buf + YOGA_C630_UCSI_CCI_SIZE,
> > + min(val_len, YOGA_C630_UCSI_DATA_SIZE));
>
> For some reason I believe multi-lines like this, including function calls
> that are split over lines should be encapsulated with {}
>
> else if(x) {
> memcpy(x,y,
> z);
> }
>
> If checkpatch doesn't complain about it feel free not to do that though.

No, checkpatch --strict doesn't complain

>
> > + else
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static int yoga_c630_ucsi_async_write(struct ucsi *ucsi, unsigned int offset,
> > + const void *val, size_t val_len)
> > +{
> > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> > +
> > + if (offset != UCSI_CONTROL ||
> > + val_len != YOGA_C630_UCSI_WRITE_SIZE)
> > + return -EINVAL;
> > +
> > + return yoga_c630_ec_ucsi_write(uec->ec, val);
> > +}
> > +
> > +static int yoga_c630_ucsi_sync_write(struct ucsi *ucsi, unsigned int offset,
> > + const void *val, size_t val_len)
> > +{
> > + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> > + bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
> > + int ret;
> > +
> > + if (ack)
> > + set_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> > + else
> > + set_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> > +
> > + reinit_completion(&uec->complete);
> > +
> > + ret = yoga_c630_ucsi_async_write(ucsi, offset, val, val_len);
> > + if (ret)
> > + goto out_clear_bit;
> > +
> > + if (!wait_for_completion_timeout(&uec->complete, 5 * HZ))
> > + ret = -ETIMEDOUT;
> > +
> > +out_clear_bit:
> > + if (ack)
> > + clear_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> > + else
> > + clear_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> > +
> > + return ret;
> > +}
> > +
> > +const struct ucsi_operations yoga_c630_ucsi_ops = {
> > + .read = yoga_c630_ucsi_read,
> > + .sync_write = yoga_c630_ucsi_sync_write,
> > + .async_write = yoga_c630_ucsi_async_write,
> > +};
> > +
> > +static int yoga_c630_ucsi_notify(struct notifier_block *nb,
> > + unsigned long action, void *data)
> > +{
> > + struct yoga_c630_ucsi *uec = container_of(nb, struct yoga_c630_ucsi, nb);
> > + u32 cci;
> > + int ret;
> > +
> > + if (action == LENOVO_EC_EVENT_USB || action == LENOVO_EC_EVENT_HPD) {
> > + ucsi_connector_change(uec->ucsi, 1);
> > + return NOTIFY_OK;
> > + }
> > +
> > + if (action != LENOVO_EC_EVENT_UCSI)
> > + return NOTIFY_DONE;
>
> Is this disjunction on action a good candidate for a switch(){}

Ack, refactored the function by extracting the UCSI notification code
and then using the switch-case.

> > +
> > + ret = uec->ucsi->ops->read(uec->ucsi, UCSI_CCI, &cci, sizeof(cci));
> > + if (ret)
> > + return NOTIFY_DONE;
> > +
> > + if (UCSI_CCI_CONNECTOR(cci))
> > + ucsi_connector_change(uec->ucsi, UCSI_CCI_CONNECTOR(cci));
> > +
> > + if (cci & UCSI_CCI_ACK_COMPLETE &&
> > + test_bit(UCSI_C630_ACK_PENDING, &uec->flags))
> > + complete(&uec->complete);
> > + if (cci & UCSI_CCI_COMMAND_COMPLETE &&
> > + test_bit(UCSI_C630_COMMAND_PENDING, &uec->flags))
> > + complete(&uec->complete);
>
> IMO these multi-line clauses should end up with a {} around the complete
> even though its not required.
>
> Emphasis on the O.

I added an empty line inbetween, then it's easier to comprehent event
without curly brackets.

>
> Reviewed-by: Bryan O'Donoghue <[email protected]>

--
With best wishes
Dmitry