Thanks to David Woodhouse for help.
Signed-off-by: Jaswinder Singh Rajput <[email protected]>
---
drivers/net/e100.c | 289 ++++++++++++------------------------
firmware/Makefile | 2 +
firmware/WHENCE | 11 ++
firmware/e100/d101m_ucode.bin.ihex | 38 +++++
firmware/e100/d101s_ucode.bin.ihex | 38 +++++
firmware/e100/d102e_ucode.bin.ihex | 38 +++++
6 files changed, 219 insertions(+), 197 deletions(-)
create mode 100644 firmware/e100/d101m_ucode.bin.ihex
create mode 100644 firmware/e100/d101s_ucode.bin.ihex
create mode 100644 firmware/e100/d102e_ucode.bin.ihex
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 9f38b16..c2b3fce 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -161,6 +161,7 @@
#include <linux/skbuff.h>
#include <linux/ethtool.h>
#include <linux/string.h>
+#include <linux/firmware.h>
#include <asm/unaligned.h>
@@ -174,10 +175,17 @@
#define E100_WATCHDOG_PERIOD (2 * HZ)
#define E100_NAPI_WEIGHT 16
+#define FIRMWARE_D101M "e100/d101m_ucode.bin"
+#define FIRMWARE_D101S "e100/d101s_ucode.bin"
+#define FIRMWARE_D102E "e100/d102e_ucode.bin"
+
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_D101M);
+MODULE_FIRMWARE(FIRMWARE_D101S);
+MODULE_FIRMWARE(FIRMWARE_D102E);
static int debug = 3;
static int eeprom_bad_csum_allow = 0;
@@ -1049,178 +1057,6 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}
-/********************************************************/
-/* Micro code for 8086:1229 Rev 8 */
-/********************************************************/
-
-/* Parameter values for the D101M B-step */
-#define D101M_CPUSAVER_TIMER_DWORD 78
-#define D101M_CPUSAVER_BUNDLE_DWORD 65
-#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
-
-#define D101M_B_RCVBUNDLE_UCODE \
-{\
-0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
-0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
-0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
-0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
-0x00380438, 0x00000000, 0x00140000, 0x00380555, \
-0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
-0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
-0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
-0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
-0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
-0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
-0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
-0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
-0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
-0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
-0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
-0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
-0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
-0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
-0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
-0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
-0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
-0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
-0x00380559, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
-0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
-0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
-}
-
-/********************************************************/
-/* Micro code for 8086:1229 Rev 9 */
-/********************************************************/
-
-/* Parameter values for the D101S */
-#define D101S_CPUSAVER_TIMER_DWORD 78
-#define D101S_CPUSAVER_BUNDLE_DWORD 67
-#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
-
-#define D101S_RCVBUNDLE_UCODE \
-{\
-0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
-0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
-0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
-0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
-0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
-0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
-0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
-0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
-0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
-0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
-0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
-0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
-0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
-0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
-0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
-0x00101313, 0x00380700, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
-0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
-0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
-0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
-0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
-0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
-0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
-0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
-0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
-0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00130831, \
-0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
-0x00041000, 0x00010004, 0x00380700 \
-}
-
-/********************************************************/
-/* Micro code for the 8086:1229 Rev F/10 */
-/********************************************************/
-
-/* Parameter values for the D102 E-step */
-#define D102_E_CPUSAVER_TIMER_DWORD 42
-#define D102_E_CPUSAVER_BUNDLE_DWORD 54
-#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
-
-#define D102_E_RCVBUNDLE_UCODE \
-{\
-0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
-0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
-0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
-0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
-0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
-0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
-0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-}
-
-static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
-{
-/* *INDENT-OFF* */
- static struct {
- u32 ucode[UCODE_SIZE + 1];
- u8 mac;
- u8 timer_dword;
- u8 bundle_dword;
- u8 min_size_dword;
- } ucode_opts[] = {
- { D101M_B_RCVBUNDLE_UCODE,
- mac_82559_D101M,
- D101M_CPUSAVER_TIMER_DWORD,
- D101M_CPUSAVER_BUNDLE_DWORD,
- D101M_CPUSAVER_MIN_SIZE_DWORD },
- { D101S_RCVBUNDLE_UCODE,
- mac_82559_D101S,
- D101S_CPUSAVER_TIMER_DWORD,
- D101S_CPUSAVER_BUNDLE_DWORD,
- D101S_CPUSAVER_MIN_SIZE_DWORD },
- { D102_E_RCVBUNDLE_UCODE,
- mac_82551_F,
- D102_E_CPUSAVER_TIMER_DWORD,
- D102_E_CPUSAVER_BUNDLE_DWORD,
- D102_E_CPUSAVER_MIN_SIZE_DWORD },
- { D102_E_RCVBUNDLE_UCODE,
- mac_82551_10,
- D102_E_CPUSAVER_TIMER_DWORD,
- D102_E_CPUSAVER_BUNDLE_DWORD,
- D102_E_CPUSAVER_MIN_SIZE_DWORD },
- { {0}, 0, 0, 0, 0}
- }, *opts;
-/* *INDENT-ON* */
-
/*************************************************************************
* CPUSaver parameters
*
@@ -1280,42 +1116,101 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb
#define BUNDLEMAX (u16)6
#define INTDELAY (u16)1536 /* 0x600 */
+/* Initialize firmware */
+static const struct firmware *e100_request_firmware(struct nic *nic)
+{
+ const char *fw_name;
+ const struct firmware *fw;
+ u8 timer, bundle, min_size;
+ int err;
+
/* do not load u-code for ICH devices */
if (nic->flags & ich)
- goto noloaducode;
+ return NULL;
/* Search for ucode match against h/w revision */
- for (opts = ucode_opts; opts->mac; opts++) {
- int i;
- u32 *ucode = opts->ucode;
- if (nic->mac != opts->mac)
- continue;
-
- /* Insert user-tunable settings */
- ucode[opts->timer_dword] &= 0xFFFF0000;
- ucode[opts->timer_dword] |= INTDELAY;
- ucode[opts->bundle_dword] &= 0xFFFF0000;
- ucode[opts->bundle_dword] |= BUNDLEMAX;
- ucode[opts->min_size_dword] &= 0xFFFF0000;
- ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
-
- for (i = 0; i < UCODE_SIZE; i++)
- cb->u.ucode[i] = cpu_to_le32(ucode[i]);
- cb->command = cpu_to_le16(cb_ucode | cb_el);
- return;
- }
-
-noloaducode:
- cb->command = cpu_to_le16(cb_nop | cb_el);
-}
-
-static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
- void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
-{
+ if (nic->mac == mac_82559_D101M)
+ fw_name = FIRMWARE_D101M;
+ else if (nic->mac == mac_82559_D101S)
+ fw_name = FIRMWARE_D101S;
+ else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
+ fw_name = FIRMWARE_D102E;
+ else /* No ucode on other devices */
+ return NULL;
+
+ err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+ if (err) {
+ DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
+ fw_name, err);
+ return ERR_PTR(err);
+ }
+ /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
+ indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
+ if (fw->size != UCODE_SIZE * 4 + 3) {
+ DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
+ fw_name, fw->size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
+ min_size >= UCODE_SIZE) {
+ DPRINTK(PROBE, ERR,
+ "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
+ fw_name, timer, bundle, min_size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+ /* OK, firmware is validated and ready to use... */
+ return fw;
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ const struct firmware *fw = (void *)skb;
+ u8 timer, bundle, min_size;
+
+ /* It's not a real skb; we just abused the fact that e100_exec_cb
+ will pass it through to here... */
+ cb->skb = NULL;
+
+ /* firmware is stored as little endian already */
+ memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ /* Insert user-tunable settings in cb->u.ucode */
+ cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
+ cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
+ cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
+
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+}
+
+static inline int e100_load_ucode_wait(struct nic *nic)
+{
+ const struct firmware *fw;
int err = 0, counter = 50;
struct cb *cb = nic->cb_to_clean;
- if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
+ fw = e100_request_firmware(nic);
+ /* If it's NULL, then no ucode is required */
+ if (!fw || IS_ERR(fw))
+ return PTR_ERR(fw);
+
+ if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
/* must restart cuc */
@@ -1435,7 +1330,7 @@ static int e100_hw_init(struct nic *nic)
return err;
if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
return err;
- if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
+ if ((err = e100_load_ucode_wait(nic)))
return err;
if((err = e100_exec_cb(nic, NULL, e100_configure)))
return err;
diff --git a/firmware/Makefile b/firmware/Makefile
index 4993a4b..d99000d 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -28,6 +28,8 @@ fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
cxgb3/t3fw-7.0.0.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
+fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
+ e100/d102e_ucode.bin
fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 8f06639..040967f 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -360,3 +360,14 @@ License: GPLv2 or OpenIB.org BSD license, no source visible
--------------------------------------------------------------------------
+Driver: e100 -- Intel PRO/100 Ethernet NIC
+
+File: e100/d101m_ucode.bin
+File: e100/d101s_ucode.bin
+File: e100/d102e_ucode.bin
+
+Licence: Unknown
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------
diff --git a/firmware/e100/d101m_ucode.bin.ihex b/firmware/e100/d101m_ucode.bin.ihex
new file mode 100644
index 0000000..12971ed
--- /dev/null
+++ b/firmware/e100/d101m_ucode.bin.ihex
@@ -0,0 +1,38 @@
+:10000000150255003704FFFFFFFFFFFF8907A70612
+:10001000FFFFFFFFFFFF580501000C001213100047
+:1000200008000C00160238009C001000564020000A
+:10003000CC802300560038009C0010000B4C24009C
+:1000400000080000184812003804380000000000C2
+:1000500000001400550538000080300062061000D2
+:100060006105100008040E006148130002000C0036
+:10007000933010000080300024061000610510004D
+:1000800008040E00610810007E000C00212C2200E4
+:1000900002000C00933010007A0C380000000800B9
+:1000A000903010007A0C38000000000000000000C2
+:1000B00000000000000000009C0010002D4C2400F7
+:1000C000040001000010040037043A00104004004E
+:1000D0008A07380000000000990010007A6C2000A8
+:1000E0009C001000484C24002408130001000C0060
+:1000F00013121000750C260000100400040001000B
+:100100002608130006000C00A806220026C91300CA
+:1001100013131000A80638000000000000000000C3
+:1001200000000000000000000000000000000000CF
+:10013000000000000000000000060800101B100076
+:10014000040005002608100010121000340C3800BE
+:1001500000000000000000005B1521009900100065
+:10016000596520009C0010005945240036081300F2
+:1001700000000C00620C220001000C00131B100098
+:100180000E9C22000E0C21000E6C22000E6C210031
+:100190000EFC22000E5C21000E4C2100550538009B
+:1001A0000400010000100400678C27000008040010
+:1001B0000081010037043A002608130001000C00FA
+:1001C00059052200131310005905380000000000E3
+:1001D000000000000000000000000000000000001F
+:1001E00000000000000000000000000031081300C3
+:1001F0000B0910001348120080FF0C00AB0626000C
+:100200000010040004000100A806380000000000EF
+:0B02100000000000000000004E417ED6
+:00000001FF
+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
diff --git a/firmware/e100/d101s_ucode.bin.ihex b/firmware/e100/d101s_ucode.bin.ihex
new file mode 100644
index 0000000..102c7fe
--- /dev/null
+++ b/firmware/e100/d101s_ucode.bin.ihex
@@ -0,0 +1,38 @@
+:10000000420255007E04FFFFFFFFFFFF1808FF06B6
+:10001000FFFFFFFFFFFFA60501000C0012131000F9
+:1000200008000C00430238009C00100056402000DD
+:10003000D0802300560038009C0010008B4F240015
+:1000400000080000184812007F043800000000007B
+:1000500000001400A30538000080300010061000D6
+:100060006105100008040E006148130002000C0036
+:10007000933010000080300024061000610510004D
+:1000800008040E00610810007E000C00A12F220061
+:1000900002000C0093301000900F380000000800A0
+:1000A00090301000900F38000000000000000000A9
+:1000B00000000000000000009C001000AD4F240074
+:1000C00004000100001004007E043A001040040007
+:1000D000190838000000000099001000FD6F200092
+:1000E0009A001000FDAF20009C001000C84F2400B3
+:1000F0002408130001000C0013121000F70F260053
+:1001000000100400040001002608130006000C0083
+:100110000007220026C9130013131000000738003F
+:1001200000000000000000000000000000000000CF
+:10013000000000000000000000060800101B100076
+:10014000040005002608100010121000B60F380039
+:100150000000000000000000A91521009900100017
+:10016000A76520009A001000A7A520009C001000A1
+:10017000A74524003608130000000C00E40F2200FD
+:1001800001000C00131B10008E9F22008E0F210017
+:100190008E6F22008E6F21008EFF22008E5F210065
+:1001A0008E4F2100A3053800040001000010040058
+:1001B000E98F270000080400008101007E043A0056
+:1001C0002608130001000C00A705220013131000DD
+:1001D000A70538000000000000000000000000003B
+:1001E000000000000000000000000000000000000F
+:1001F00000000000310813000B0910001348120022
+:1002000080FF0C000307260000100400040001001A
+:0B02100000073800000000004E438093
+:00000001FF
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
diff --git a/firmware/e100/d102e_ucode.bin.ihex b/firmware/e100/d102e_ucode.bin.ihex
new file mode 100644
index 0000000..9e806da
--- /dev/null
+++ b/firmware/e100/d102e_ucode.bin.ihex
@@ -0,0 +1,38 @@
+:100000008F027D00F904420E850CED14E914FA14F8
+:10001000360EF70EFF1FFF1FB914E00000000000AE
+:100020000000000000000000BD14E000000000001F
+:100030000000000000000000D514E00000000000F7
+:1000400000000000000000000000000000000000B0
+:100050000000000000000000C114E00000000000EB
+:100060000000000000000000000000000000000090
+:100070000000000000000000000000000000000080
+:100080000000000000000000000000000000000070
+:100090000000000000000000C814E00000000000A4
+:1000A000000000000000000000062000EE14E00048
+:1000B000000000000000000080FF3000460E9400A9
+:1000C0000082030000201000430EE000000000004A
+:1000D000000000000000000006003000FB14E000FB
+:1000E0000000000000000000000000000000000010
+:1000F0000000000000000000000000000000000000
+:1001000000000000000000000000000000000000EF
+:100110000000000000000000416E90003C0E8000D6
+:10012000390EE00000000000FD6E9000FD0E900012
+:10013000F80EE000000000000000000000000000D9
+:1001400000000000000000000000000000000000AF
+:10015000000000000000000000000000000000009F
+:10016000000000000000000000000000000000008F
+:10017000000000000000000000000000000000007F
+:10018000000000000000000000000000000000006F
+:10019000000000000000000000000000000000005F
+:1001A000000000000000000000000000000000004F
+:1001B000000000000000000000000000000000003F
+:1001C000000000000000000000000000000000002F
+:1001D000000000000000000000000000000000001F
+:1001E000000000000000000000000000000000000F
+:1001F00000000000000000000000000000000000FF
+:1002000000000000000000000000000000000000EE
+:0B02100000000000000000002A362E55
+:00000001FF
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
--
1.5.5.1
On Tue, Dec 30, 2008 at 12:40 AM, Jaswinder Singh Rajput
<[email protected]> wrote:
> Thanks to David Woodhouse for help.
>
> Signed-off-by: Jaswinder Singh Rajput <[email protected]>
> ---
> drivers/net/e100.c | 289 ++++++++++++------------------------
> firmware/Makefile | 2 +
> firmware/WHENCE | 11 ++
> firmware/e100/d101m_ucode.bin.ihex | 38 +++++
> firmware/e100/d101s_ucode.bin.ihex | 38 +++++
> firmware/e100/d102e_ucode.bin.ihex | 38 +++++
> 6 files changed, 219 insertions(+), 197 deletions(-)
> create mode 100644 firmware/e100/d101m_ucode.bin.ihex
> create mode 100644 firmware/e100/d101s_ucode.bin.ihex
> create mode 100644 firmware/e100/d102e_ucode.bin.ihex
>
> diff --git a/drivers/net/e100.c b/drivers/net/e100.c
> index 9f38b16..c2b3fce 100644
> --- a/drivers/net/e100.c
> +++ b/drivers/net/e100.c
> @@ -161,6 +161,7 @@
> #include <linux/skbuff.h>
> #include <linux/ethtool.h>
> #include <linux/string.h>
> +#include <linux/firmware.h>
> #include <asm/unaligned.h>
>
>
> @@ -174,10 +175,17 @@
> #define E100_WATCHDOG_PERIOD (2 * HZ)
> #define E100_NAPI_WEIGHT 16
>
> +#define FIRMWARE_D101M "e100/d101m_ucode.bin"
> +#define FIRMWARE_D101S "e100/d101s_ucode.bin"
> +#define FIRMWARE_D102E "e100/d102e_ucode.bin"
> +
> MODULE_DESCRIPTION(DRV_DESCRIPTION);
> MODULE_AUTHOR(DRV_COPYRIGHT);
> MODULE_LICENSE("GPL");
> MODULE_VERSION(DRV_VERSION);
> +MODULE_FIRMWARE(FIRMWARE_D101M);
> +MODULE_FIRMWARE(FIRMWARE_D101S);
> +MODULE_FIRMWARE(FIRMWARE_D102E);
>
> static int debug = 3;
> static int eeprom_bad_csum_allow = 0;
> @@ -1049,178 +1057,6 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
> c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
> }
>
> -/********************************************************/
> -/* Micro code for 8086:1229 Rev 8 */
> -/********************************************************/
> -
> -/* Parameter values for the D101M B-step */
> -#define D101M_CPUSAVER_TIMER_DWORD 78
> -#define D101M_CPUSAVER_BUNDLE_DWORD 65
> -#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
> -
> -#define D101M_B_RCVBUNDLE_UCODE \
> -{\
> -0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
> -0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
> -0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
> -0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
> -0x00380438, 0x00000000, 0x00140000, 0x00380555, \
> -0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
> -0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
> -0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
> -0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
> -0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
> -0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
> -0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
> -0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
> -0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
> -0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
> -0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
> -0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
> -0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
> -0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
> -0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
> -0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
> -0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
> -0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
> -0x00380559, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
> -0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
> -0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
> -}
> -
> -/********************************************************/
> -/* Micro code for 8086:1229 Rev 9 */
> -/********************************************************/
> -
> -/* Parameter values for the D101S */
> -#define D101S_CPUSAVER_TIMER_DWORD 78
> -#define D101S_CPUSAVER_BUNDLE_DWORD 67
> -#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
> -
> -#define D101S_RCVBUNDLE_UCODE \
> -{\
> -0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
> -0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
> -0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
> -0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
> -0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
> -0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
> -0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
> -0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
> -0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
> -0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
> -0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
> -0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
> -0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
> -0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
> -0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
> -0x00101313, 0x00380700, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
> -0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
> -0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
> -0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
> -0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
> -0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
> -0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
> -0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
> -0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
> -0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00130831, \
> -0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
> -0x00041000, 0x00010004, 0x00380700 \
> -}
> -
> -/********************************************************/
> -/* Micro code for the 8086:1229 Rev F/10 */
> -/********************************************************/
> -
> -/* Parameter values for the D102 E-step */
> -#define D102_E_CPUSAVER_TIMER_DWORD 42
> -#define D102_E_CPUSAVER_BUNDLE_DWORD 54
> -#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
> -
> -#define D102_E_RCVBUNDLE_UCODE \
> -{\
> -0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
> -0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
> -0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
> -0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
> -0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
> -0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
> -0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
> -0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
> -0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -0x00000000, 0x00000000, 0x00000000, 0x00000000, \
> -}
> -
> -static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
> -{
> -/* *INDENT-OFF* */
> - static struct {
> - u32 ucode[UCODE_SIZE + 1];
> - u8 mac;
> - u8 timer_dword;
> - u8 bundle_dword;
> - u8 min_size_dword;
> - } ucode_opts[] = {
> - { D101M_B_RCVBUNDLE_UCODE,
> - mac_82559_D101M,
> - D101M_CPUSAVER_TIMER_DWORD,
> - D101M_CPUSAVER_BUNDLE_DWORD,
> - D101M_CPUSAVER_MIN_SIZE_DWORD },
> - { D101S_RCVBUNDLE_UCODE,
> - mac_82559_D101S,
> - D101S_CPUSAVER_TIMER_DWORD,
> - D101S_CPUSAVER_BUNDLE_DWORD,
> - D101S_CPUSAVER_MIN_SIZE_DWORD },
> - { D102_E_RCVBUNDLE_UCODE,
> - mac_82551_F,
> - D102_E_CPUSAVER_TIMER_DWORD,
> - D102_E_CPUSAVER_BUNDLE_DWORD,
> - D102_E_CPUSAVER_MIN_SIZE_DWORD },
> - { D102_E_RCVBUNDLE_UCODE,
> - mac_82551_10,
> - D102_E_CPUSAVER_TIMER_DWORD,
> - D102_E_CPUSAVER_BUNDLE_DWORD,
> - D102_E_CPUSAVER_MIN_SIZE_DWORD },
> - { {0}, 0, 0, 0, 0}
> - }, *opts;
> -/* *INDENT-ON* */
> -
> /*************************************************************************
> * CPUSaver parameters
> *
> @@ -1280,42 +1116,101 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb
> #define BUNDLEMAX (u16)6
> #define INTDELAY (u16)1536 /* 0x600 */
>
> +/* Initialize firmware */
> +static const struct firmware *e100_request_firmware(struct nic *nic)
> +{
> + const char *fw_name;
> + const struct firmware *fw;
> + u8 timer, bundle, min_size;
> + int err;
> +
> /* do not load u-code for ICH devices */
> if (nic->flags & ich)
> - goto noloaducode;
> + return NULL;
>
> /* Search for ucode match against h/w revision */
> - for (opts = ucode_opts; opts->mac; opts++) {
> - int i;
> - u32 *ucode = opts->ucode;
> - if (nic->mac != opts->mac)
> - continue;
> -
> - /* Insert user-tunable settings */
> - ucode[opts->timer_dword] &= 0xFFFF0000;
> - ucode[opts->timer_dword] |= INTDELAY;
> - ucode[opts->bundle_dword] &= 0xFFFF0000;
> - ucode[opts->bundle_dword] |= BUNDLEMAX;
> - ucode[opts->min_size_dword] &= 0xFFFF0000;
> - ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
> -
> - for (i = 0; i < UCODE_SIZE; i++)
> - cb->u.ucode[i] = cpu_to_le32(ucode[i]);
> - cb->command = cpu_to_le16(cb_ucode | cb_el);
> - return;
> - }
> -
> -noloaducode:
> - cb->command = cpu_to_le16(cb_nop | cb_el);
> -}
> -
> -static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
> - void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
> -{
> + if (nic->mac == mac_82559_D101M)
> + fw_name = FIRMWARE_D101M;
> + else if (nic->mac == mac_82559_D101S)
> + fw_name = FIRMWARE_D101S;
> + else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
> + fw_name = FIRMWARE_D102E;
> + else /* No ucode on other devices */
> + return NULL;
> +
> + err = request_firmware(&fw, fw_name, &nic->pdev->dev);
> + if (err) {
> + DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
> + fw_name, err);
> + return ERR_PTR(err);
> + }
> + /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
> + indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
> + if (fw->size != UCODE_SIZE * 4 + 3) {
> + DPRINTK(PROBE, ERR, "Firmware \"%s\" has wrong size %zu\n",
> + fw_name, fw->size);
> + release_firmware(fw);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + /* Read timer, bundle and min_size from end of firmware blob */
> + timer = fw->data[UCODE_SIZE * 4];
> + bundle = fw->data[UCODE_SIZE * 4 + 1];
> + min_size = fw->data[UCODE_SIZE * 4 + 2];
> +
> + if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
> + min_size >= UCODE_SIZE) {
> + DPRINTK(PROBE, ERR,
> + "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
> + fw_name, timer, bundle, min_size);
> + release_firmware(fw);
> + return ERR_PTR(-EINVAL);
> + }
> + /* OK, firmware is validated and ready to use... */
> + return fw;
> +}
> +
> +static void e100_setup_ucode(struct nic *nic, struct cb *cb,
> + struct sk_buff *skb)
> +{
> + const struct firmware *fw = (void *)skb;
> + u8 timer, bundle, min_size;
> +
> + /* It's not a real skb; we just abused the fact that e100_exec_cb
> + will pass it through to here... */
> + cb->skb = NULL;
> +
> + /* firmware is stored as little endian already */
> + memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
> +
> + /* Read timer, bundle and min_size from end of firmware blob */
> + timer = fw->data[UCODE_SIZE * 4];
> + bundle = fw->data[UCODE_SIZE * 4 + 1];
> + min_size = fw->data[UCODE_SIZE * 4 + 2];
> +
> + /* Insert user-tunable settings in cb->u.ucode */
> + cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
> + cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
> + cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
> + cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
> + cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
> + cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
> +
> + cb->command = cpu_to_le16(cb_ucode | cb_el);
> +}
> +
> +static inline int e100_load_ucode_wait(struct nic *nic)
> +{
> + const struct firmware *fw;
> int err = 0, counter = 50;
> struct cb *cb = nic->cb_to_clean;
>
> - if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
> + fw = e100_request_firmware(nic);
> + /* If it's NULL, then no ucode is required */
> + if (!fw || IS_ERR(fw))
> + return PTR_ERR(fw);
> +
> + if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
> DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
>
> /* must restart cuc */
> @@ -1435,7 +1330,7 @@ static int e100_hw_init(struct nic *nic)
> return err;
> if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
> return err;
> - if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
> + if ((err = e100_load_ucode_wait(nic)))
> return err;
> if((err = e100_exec_cb(nic, NULL, e100_configure)))
> return err;
> diff --git a/firmware/Makefile b/firmware/Makefile
> index 4993a4b..d99000d 100644
> --- a/firmware/Makefile
> +++ b/firmware/Makefile
> @@ -28,6 +28,8 @@ fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
> cxgb3/t3c_psram-1.1.0.bin \
> cxgb3/t3fw-7.0.0.bin
> fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
> +fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
> + e100/d102e_ucode.bin
> fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
> fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
> fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
> diff --git a/firmware/WHENCE b/firmware/WHENCE
> index 8f06639..040967f 100644
> --- a/firmware/WHENCE
> +++ b/firmware/WHENCE
> @@ -360,3 +360,14 @@ License: GPLv2 or OpenIB.org BSD license, no source visible
>
> --------------------------------------------------------------------------
>
> +Driver: e100 -- Intel PRO/100 Ethernet NIC
> +
> +File: e100/d101m_ucode.bin
> +File: e100/d101s_ucode.bin
> +File: e100/d102e_ucode.bin
> +
> +Licence: Unknown
> +
> +Found in hex form in kernel source.
> +
> +--------------------------------------------------------------------------
> diff --git a/firmware/e100/d101m_ucode.bin.ihex b/firmware/e100/d101m_ucode.bin.ihex
> new file mode 100644
> index 0000000..12971ed
> --- /dev/null
> +++ b/firmware/e100/d101m_ucode.bin.ihex
> @@ -0,0 +1,38 @@
> +:10000000150255003704FFFFFFFFFFFF8907A70612
> +:10001000FFFFFFFFFFFF580501000C001213100047
> +:1000200008000C00160238009C001000564020000A
> +:10003000CC802300560038009C0010000B4C24009C
> +:1000400000080000184812003804380000000000C2
> +:1000500000001400550538000080300062061000D2
> +:100060006105100008040E006148130002000C0036
> +:10007000933010000080300024061000610510004D
> +:1000800008040E00610810007E000C00212C2200E4
> +:1000900002000C00933010007A0C380000000800B9
> +:1000A000903010007A0C38000000000000000000C2
> +:1000B00000000000000000009C0010002D4C2400F7
> +:1000C000040001000010040037043A00104004004E
> +:1000D0008A07380000000000990010007A6C2000A8
> +:1000E0009C001000484C24002408130001000C0060
> +:1000F00013121000750C260000100400040001000B
> +:100100002608130006000C00A806220026C91300CA
> +:1001100013131000A80638000000000000000000C3
> +:1001200000000000000000000000000000000000CF
> +:10013000000000000000000000060800101B100076
> +:10014000040005002608100010121000340C3800BE
> +:1001500000000000000000005B1521009900100065
> +:10016000596520009C0010005945240036081300F2
> +:1001700000000C00620C220001000C00131B100098
> +:100180000E9C22000E0C21000E6C22000E6C210031
> +:100190000EFC22000E5C21000E4C2100550538009B
> +:1001A0000400010000100400678C27000008040010
> +:1001B0000081010037043A002608130001000C00FA
> +:1001C00059052200131310005905380000000000E3
> +:1001D000000000000000000000000000000000001F
> +:1001E00000000000000000000000000031081300C3
> +:1001F0000B0910001348120080FF0C00AB0626000C
> +:100200000010040004000100A806380000000000EF
> +:0B02100000000000000000004E417ED6
> +:00000001FF
> +/********************************************************/
> +/* Micro code for 8086:1229 Rev 8 */
> +/********************************************************/
> diff --git a/firmware/e100/d101s_ucode.bin.ihex b/firmware/e100/d101s_ucode.bin.ihex
> new file mode 100644
> index 0000000..102c7fe
> --- /dev/null
> +++ b/firmware/e100/d101s_ucode.bin.ihex
> @@ -0,0 +1,38 @@
> +:10000000420255007E04FFFFFFFFFFFF1808FF06B6
> +:10001000FFFFFFFFFFFFA60501000C0012131000F9
> +:1000200008000C00430238009C00100056402000DD
> +:10003000D0802300560038009C0010008B4F240015
> +:1000400000080000184812007F043800000000007B
> +:1000500000001400A30538000080300010061000D6
> +:100060006105100008040E006148130002000C0036
> +:10007000933010000080300024061000610510004D
> +:1000800008040E00610810007E000C00A12F220061
> +:1000900002000C0093301000900F380000000800A0
> +:1000A00090301000900F38000000000000000000A9
> +:1000B00000000000000000009C001000AD4F240074
> +:1000C00004000100001004007E043A001040040007
> +:1000D000190838000000000099001000FD6F200092
> +:1000E0009A001000FDAF20009C001000C84F2400B3
> +:1000F0002408130001000C0013121000F70F260053
> +:1001000000100400040001002608130006000C0083
> +:100110000007220026C9130013131000000738003F
> +:1001200000000000000000000000000000000000CF
> +:10013000000000000000000000060800101B100076
> +:10014000040005002608100010121000B60F380039
> +:100150000000000000000000A91521009900100017
> +:10016000A76520009A001000A7A520009C001000A1
> +:10017000A74524003608130000000C00E40F2200FD
> +:1001800001000C00131B10008E9F22008E0F210017
> +:100190008E6F22008E6F21008EFF22008E5F210065
> +:1001A0008E4F2100A3053800040001000010040058
> +:1001B000E98F270000080400008101007E043A0056
> +:1001C0002608130001000C00A705220013131000DD
> +:1001D000A70538000000000000000000000000003B
> +:1001E000000000000000000000000000000000000F
> +:1001F00000000000310813000B0910001348120022
> +:1002000080FF0C000307260000100400040001001A
> +:0B02100000073800000000004E438093
> +:00000001FF
> +/********************************************************/
> +/* Micro code for 8086:1229 Rev 9 */
> +/********************************************************/
> diff --git a/firmware/e100/d102e_ucode.bin.ihex b/firmware/e100/d102e_ucode.bin.ihex
> new file mode 100644
> index 0000000..9e806da
> --- /dev/null
> +++ b/firmware/e100/d102e_ucode.bin.ihex
> @@ -0,0 +1,38 @@
> +:100000008F027D00F904420E850CED14E914FA14F8
> +:10001000360EF70EFF1FFF1FB914E00000000000AE
> +:100020000000000000000000BD14E000000000001F
> +:100030000000000000000000D514E00000000000F7
> +:1000400000000000000000000000000000000000B0
> +:100050000000000000000000C114E00000000000EB
> +:100060000000000000000000000000000000000090
> +:100070000000000000000000000000000000000080
> +:100080000000000000000000000000000000000070
> +:100090000000000000000000C814E00000000000A4
> +:1000A000000000000000000000062000EE14E00048
> +:1000B000000000000000000080FF3000460E9400A9
> +:1000C0000082030000201000430EE000000000004A
> +:1000D000000000000000000006003000FB14E000FB
> +:1000E0000000000000000000000000000000000010
> +:1000F0000000000000000000000000000000000000
> +:1001000000000000000000000000000000000000EF
> +:100110000000000000000000416E90003C0E8000D6
> +:10012000390EE00000000000FD6E9000FD0E900012
> +:10013000F80EE000000000000000000000000000D9
> +:1001400000000000000000000000000000000000AF
> +:10015000000000000000000000000000000000009F
> +:10016000000000000000000000000000000000008F
> +:10017000000000000000000000000000000000007F
> +:10018000000000000000000000000000000000006F
> +:10019000000000000000000000000000000000005F
> +:1001A000000000000000000000000000000000004F
> +:1001B000000000000000000000000000000000003F
> +:1001C000000000000000000000000000000000002F
> +:1001D000000000000000000000000000000000001F
> +:1001E000000000000000000000000000000000000F
> +:1001F00000000000000000000000000000000000FF
> +:1002000000000000000000000000000000000000EE
> +:0B02100000000000000000002A362E55
> +:00000001FF
> +/********************************************************/
> +/* Micro code for the 8086:1229 Rev F/10 */
> +/********************************************************/
> --
> 1.5.5.1
>
Please hold off on committing, until we have had ample time to do some
regression testing. While this patch may have been in linux-next,
this is the first we have seen of it.
I am concerned that IPMI traffic will be adversely affected by this patch.
--
Cheers,
Jeff
From: "Jeff Kirsher" <[email protected]>
Date: Tue, 30 Dec 2008 14:33:36 -0800
> Please hold off on committing, until we have had ample time to do some
> regression testing. While this patch may have been in linux-next,
> this is the first we have seen of it.
>
> I am concerned that IPMI traffic will be adversely affected by this patch.
Status please?
On Sun, Jan 4, 2009 at 4:06 PM, David Miller <[email protected]> wrote:
> From: "Jeff Kirsher" <[email protected]>
> Date: Tue, 30 Dec 2008 14:33:36 -0800
>
>> Please hold off on committing, until we have had ample time to do some
>> regression testing. While this patch may have been in linux-next,
>> this is the first we have seen of it.
>>
>> I am concerned that IPMI traffic will be adversely affected by this patch.
>
> Status please?
> --
>
The only testing left to do is to make sure that ICH devices still
work and to make sure the IPMI traffic is not affected by this patch.
All other testing looks good. I am sorry that I have been slow to
give status, the holiday's have put a strain on available resources.
--
Cheers,
Jeff
From: "Jeff Kirsher" <[email protected]>
Date: Sun, 4 Jan 2009 18:20:24 -0800
> On Sun, Jan 4, 2009 at 4:06 PM, David Miller <[email protected]> wrote:
> > From: "Jeff Kirsher" <[email protected]>
> > Date: Tue, 30 Dec 2008 14:33:36 -0800
> >
> >> Please hold off on committing, until we have had ample time to do some
> >> regression testing. While this patch may have been in linux-next,
> >> this is the first we have seen of it.
> >>
> >> I am concerned that IPMI traffic will be adversely affected by this patch.
> >
> > Status please?
> > --
>
> The only testing left to do is to make sure that ICH devices still
> work and to make sure the IPMI traffic is not affected by this patch.
> All other testing looks good. I am sorry that I have been slow to
> give status, the holiday's have put a strain on available resources.
Ok, thanks for the update.
On Sun, Jan 4, 2009 at 9:34 PM, David Miller <[email protected]> wrote:
> From: "Jeff Kirsher" <[email protected]>
> Date: Sun, 4 Jan 2009 18:20:24 -0800
>
>> On Sun, Jan 4, 2009 at 4:06 PM, David Miller <[email protected]> wrote:
>> > From: "Jeff Kirsher" <[email protected]>
>> > Date: Tue, 30 Dec 2008 14:33:36 -0800
>> >
>> >> Please hold off on committing, until we have had ample time to do some
>> >> regression testing. While this patch may have been in linux-next,
>> >> this is the first we have seen of it.
>> >>
>> >> I am concerned that IPMI traffic will be adversely affected by this patch.
>> >
>> > Status please?
>> > --
>>
>> The only testing left to do is to make sure that ICH devices still
>> work and to make sure the IPMI traffic is not affected by this patch.
>> All other testing looks good. I am sorry that I have been slow to
>> give status, the holiday's have put a strain on available resources.
>
> Ok, thanks for the update.
> --
>
So here is the latest testing update...
The only testing that we were not able to do was the IPMI testing,
because of the lack of resources. All other testing passed.
While all other testing passed, I am concerned about not being able to
test whether or not this change affects the ability to pass IPMI
traffic. I am not sure if the "gain" of using request_firmware() out
weighs the potential risk that IPMI traffic may be broken with this
patch. I guess I wondering what the gain is in using the
request_firmware() function?
>From past experience with IPMI traffic and the e100, the loading of
the microcode in the correct manner greatly affected whether IPMI
traffic would pass or not.
--
Cheers,
Jeff
On Wed, Jan 7, 2009 at 10:23 AM, Jeff Kirsher
<[email protected]> wrote:
> On Sun, Jan 4, 2009 at 9:34 PM, David Miller <[email protected]> wrote:
>> From: "Jeff Kirsher" <[email protected]>
>> Date: Sun, 4 Jan 2009 18:20:24 -0800
>>
>>> On Sun, Jan 4, 2009 at 4:06 PM, David Miller <[email protected]> wrote:
>>> > From: "Jeff Kirsher" <[email protected]>
>>> > Date: Tue, 30 Dec 2008 14:33:36 -0800
>>> >
>>> >> Please hold off on committing, until we have had ample time to do some
>>> >> regression testing. While this patch may have been in linux-next,
>>> >> this is the first we have seen of it.
>>> >>
>>> >> I am concerned that IPMI traffic will be adversely affected by this patch.
>>> >
>>> > Status please?
>>> > --
>>>
>>> The only testing left to do is to make sure that ICH devices still
>>> work and to make sure the IPMI traffic is not affected by this patch.
>>> All other testing looks good. I am sorry that I have been slow to
>>> give status, the holiday's have put a strain on available resources.
>>
>> Ok, thanks for the update.
>> --
>>
>
> So here is the latest testing update...
>
> The only testing that we were not able to do was the IPMI testing,
> because of the lack of resources. All other testing passed.
>
> While all other testing passed, I am concerned about not being able to
> test whether or not this change affects the ability to pass IPMI
> traffic. I am not sure if the "gain" of using request_firmware() out
> weighs the potential risk that IPMI traffic may be broken with this
> patch. I guess I wondering what the gain is in using the
> request_firmware() function?
>
> From past experience with IPMI traffic and the e100, the loading of
> the microcode in the correct manner greatly affected whether IPMI
> traffic would pass or not.
>
> --
> Cheers,
> Jeff
>
Removed bad email address ([email protected]) from CC. That email
address is no longer valid.
--
Cheers,
Jeff
From: "Jeff Kirsher" <[email protected]>
Date: Wed, 7 Jan 2009 10:23:44 -0800
> The only testing that we were not able to do was the IPMI testing,
> because of the lack of resources. All other testing passed.
>
> While all other testing passed, I am concerned about not being able to
> test whether or not this change affects the ability to pass IPMI
> traffic. I am not sure if the "gain" of using request_firmware() out
> weighs the potential risk that IPMI traffic may be broken with this
> patch. I guess I wondering what the gain is in using the
> request_firmware() function?
>
> >From past experience with IPMI traffic and the e100, the loading of
> the microcode in the correct manner greatly affected whether IPMI
> traffic would pass or not.
Jeff, I've lost all of my patience.
All drivers are being converted this way. I fought against doing it
to tg3 for various reasons, but the tide worked against me and I
accepted that.
We can't hold this patch up forever for a potential problem that you
don't have the resources to even test for more than a week.
I'm therefore adding this patch, and we'll fix or revert if the
"possible" IPMI problems do surface.