This patchset improves the performance of accounted kernel memory allocations
by ~30% as measured by a micro-benchmark [1]. The benchmark is very
straightforward: 1M of 64 bytes-large kmalloc() allocations.
Below are results with the disabled kernel memory accounting, the original state
and with this patchset applied.
| | Kmem disabled | Original | Patched | Delta |
|-------------+---------------+----------+---------+--------|
| User cgroup | 29764 | 84548 | 59078 | -30.0% |
| Root cgroup | 29742 | 48342 | 31501 | -34.8% |
As we can see, the patchset removes the majority of the overhead when there is
no actual accounting (a task belongs to the root memory cgroup) and almost
halves the accounting overhead otherwise.
The main idea is to get rid of unnecessary memcg to objcg conversions and switch
to a scope-based protection of objcgs, which eliminates extra operations with
objcg reference counters under a rcu read lock. More details are provided in
individual commit descriptions.
v5:
- fixed another refcnt bug spotted by Vlastimil
- small refactoring of current_obj_cgroup()
- added a patch for get_obj_cgroup() refactoring
v4:
- fixed a bug spotted by Vlastimil
- cosmetic changes, per Vlastimil
v3:
- fixed a bug spotted by Shakeel
- added some comments, per Shakeel
v2:
- fixed a bug discovered by Naresh Kamboju
- code changes asked by Johannes (added comments, open-coded bit ops)
- merged in a couple of small fixes
v1:
- made the objcg update fully lockless
- fixed !CONFIG_MMU build issues
rfc:
https://lwn.net/Articles/945722/
--
[1]:
static int memory_alloc_test(struct seq_file *m, void *v)
{
unsigned long i, j;
void **ptrs;
ktime_t start, end;
s64 delta, min_delta = LLONG_MAX;
ptrs = kvmalloc(sizeof(void *) * 1000000, GFP_KERNEL);
if (!ptrs)
return -ENOMEM;
for (j = 0; j < 100; j++) {
start = ktime_get();
for (i = 0; i < 1000000; i++)
ptrs[i] = kmalloc(64, GFP_KERNEL_ACCOUNT);
end = ktime_get();
delta = ktime_us_delta(end, start);
if (delta < min_delta)
min_delta = delta;
for (i = 0; i < 1000000; i++)
kfree(ptrs[i]);
}
kvfree(ptrs);
seq_printf(m, "%lld us\n", min_delta);
return 0;
}
--
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Roman Gushchin (6):
mm: kmem: optimize get_obj_cgroup_from_current()
mm: kmem: add direct objcg pointer to task_struct
mm: kmem: make memcg keep a reference to the original objcg
mm: kmem: scoped objcg protection
percpu: scoped objcg protection
mm: kmem: reimplement get_obj_cgroup_from_current()
include/linux/memcontrol.h | 28 +++++-
include/linux/sched.h | 4 +
include/linux/sched/mm.h | 4 +
mm/memcontrol.c | 187 +++++++++++++++++++++++++++++++------
mm/percpu.c | 8 +-
mm/slab.h | 15 +--
6 files changed, 204 insertions(+), 42 deletions(-)
--
2.42.0
Switch to a scope-based protection of the objcg pointer on slab/kmem
allocation paths. Instead of using the get_() semantics in the
pre-allocation hook and put the reference afterwards, let's rely
on the fact that objcg is pinned by the scope.
It's possible because:
1) if the objcg is received from the current task struct, the task is
keeping a reference to the objcg.
2) if the objcg is received from an active memcg (remote charging),
the memcg is pinned by the scope and has a reference to the
corresponding objcg.
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
---
include/linux/memcontrol.h | 9 ++++++++
include/linux/sched/mm.h | 4 ++++
mm/memcontrol.c | 47 ++++++++++++++++++++++++++++++++++++--
mm/slab.h | 15 ++++++------
4 files changed, 66 insertions(+), 9 deletions(-)
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 277690af383d..a89df289144d 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -1769,6 +1769,15 @@ bool mem_cgroup_kmem_disabled(void);
int __memcg_kmem_charge_page(struct page *page, gfp_t gfp, int order);
void __memcg_kmem_uncharge_page(struct page *page, int order);
+/*
+ * The returned objcg pointer is safe to use without additional
+ * protection within a scope. The scope is defined either by
+ * the current task (similar to the "current" global variable)
+ * or by set_active_memcg() pair.
+ * Please, use obj_cgroup_get() to get a reference if the pointer
+ * needs to be used outside of the local scope.
+ */
+struct obj_cgroup *current_obj_cgroup(void);
struct obj_cgroup *get_obj_cgroup_from_current(void);
struct obj_cgroup *get_obj_cgroup_from_folio(struct folio *folio);
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 8d89c8c4fac1..9a19f1b42f64 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -403,6 +403,10 @@ DECLARE_PER_CPU(struct mem_cgroup *, int_active_memcg);
* __GFP_ACCOUNT allocations till the end of the scope will be charged to the
* given memcg.
*
+ * Please, make sure that caller has a reference to the passed memcg structure,
+ * so its lifetime is guaranteed to exceed the scope between two
+ * set_active_memcg() calls.
+ *
* NOTE: This function can nest. Users must save the return value and
* reset the previous value after their own charging scope is over.
*/
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index d964b91f00c8..e3d4b7fabb7d 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3088,6 +3088,49 @@ __always_inline struct obj_cgroup *get_obj_cgroup_from_current(void)
return objcg;
}
+__always_inline struct obj_cgroup *current_obj_cgroup(void)
+{
+ struct mem_cgroup *memcg;
+ struct obj_cgroup *objcg;
+
+ if (in_task()) {
+ memcg = current->active_memcg;
+ if (unlikely(memcg))
+ goto from_memcg;
+
+ objcg = READ_ONCE(current->objcg);
+ if (unlikely((unsigned long)objcg & CURRENT_OBJCG_UPDATE_FLAG))
+ objcg = current_objcg_update();
+ /*
+ * Objcg reference is kept by the task, so it's safe
+ * to use the objcg by the current task.
+ */
+ return objcg;
+ }
+
+ memcg = this_cpu_read(int_active_memcg);
+ if (unlikely(memcg))
+ goto from_memcg;
+
+ return NULL;
+
+from_memcg:
+ for (; !mem_cgroup_is_root(memcg); memcg = parent_mem_cgroup(memcg)) {
+ /*
+ * Memcg pointer is protected by scope (see set_active_memcg())
+ * and is pinning the corresponding objcg, so objcg can't go
+ * away and can be used within the scope without any additional
+ * protection.
+ */
+ objcg = rcu_dereference_check(memcg->objcg, 1);
+ if (likely(objcg))
+ break;
+ objcg = NULL;
+ }
+
+ return objcg;
+}
+
struct obj_cgroup *get_obj_cgroup_from_folio(struct folio *folio)
{
struct obj_cgroup *objcg;
@@ -3182,15 +3225,15 @@ int __memcg_kmem_charge_page(struct page *page, gfp_t gfp, int order)
struct obj_cgroup *objcg;
int ret = 0;
- objcg = get_obj_cgroup_from_current();
+ objcg = current_obj_cgroup();
if (objcg) {
ret = obj_cgroup_charge_pages(objcg, gfp, 1 << order);
if (!ret) {
+ obj_cgroup_get(objcg);
page->memcg_data = (unsigned long)objcg |
MEMCG_DATA_KMEM;
return 0;
}
- obj_cgroup_put(objcg);
}
return ret;
}
diff --git a/mm/slab.h b/mm/slab.h
index 799a315695c6..3d07fb428393 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -484,7 +484,12 @@ static inline bool memcg_slab_pre_alloc_hook(struct kmem_cache *s,
if (!(flags & __GFP_ACCOUNT) && !(s->flags & SLAB_ACCOUNT))
return true;
- objcg = get_obj_cgroup_from_current();
+ /*
+ * The obtained objcg pointer is safe to use within the current scope,
+ * defined by current task or set_active_memcg() pair.
+ * obj_cgroup_get() is used to get a permanent reference.
+ */
+ objcg = current_obj_cgroup();
if (!objcg)
return true;
@@ -497,17 +502,14 @@ static inline bool memcg_slab_pre_alloc_hook(struct kmem_cache *s,
css_put(&memcg->css);
if (ret)
- goto out;
+ return false;
}
if (obj_cgroup_charge(objcg, flags, objects * obj_full_size(s)))
- goto out;
+ return false;
*objcgp = objcg;
return true;
-out:
- obj_cgroup_put(objcg);
- return false;
}
static inline void memcg_slab_post_alloc_hook(struct kmem_cache *s,
@@ -542,7 +544,6 @@ static inline void memcg_slab_post_alloc_hook(struct kmem_cache *s,
obj_cgroup_uncharge(objcg, obj_full_size(s));
}
}
- obj_cgroup_put(objcg);
}
static inline void memcg_slab_free_hook(struct kmem_cache *s, struct slab *slab,
--
2.42.0
Reimplement get_obj_cgroup_from_current() using current_obj_cgroup().
get_obj_cgroup_from_current() and current_obj_cgroup() share 80% of
the code, so the new implementation is almost trivial.
get_obj_cgroup_from_current() is a convenient function used by the
bpf subsystem, so there is no reason to get rid of it completely.
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
---
include/linux/memcontrol.h | 11 ++++++++++-
mm/memcontrol.c | 32 --------------------------------
2 files changed, 10 insertions(+), 33 deletions(-)
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index a89df289144d..ef26551a633f 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -1778,9 +1778,18 @@ void __memcg_kmem_uncharge_page(struct page *page, int order);
* needs to be used outside of the local scope.
*/
struct obj_cgroup *current_obj_cgroup(void);
-struct obj_cgroup *get_obj_cgroup_from_current(void);
struct obj_cgroup *get_obj_cgroup_from_folio(struct folio *folio);
+static inline struct obj_cgroup *get_obj_cgroup_from_current(void)
+{
+ struct obj_cgroup *objcg = current_obj_cgroup();
+
+ if (objcg)
+ obj_cgroup_get(objcg);
+
+ return objcg;
+}
+
int obj_cgroup_charge(struct obj_cgroup *objcg, gfp_t gfp, size_t size);
void obj_cgroup_uncharge(struct obj_cgroup *objcg, size_t size);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e3d4b7fabb7d..e13c10912c16 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -3056,38 +3056,6 @@ static struct obj_cgroup *current_objcg_update(void)
return objcg;
}
-__always_inline struct obj_cgroup *get_obj_cgroup_from_current(void)
-{
- struct mem_cgroup *memcg;
- struct obj_cgroup *objcg;
-
- if (in_task()) {
- memcg = current->active_memcg;
- if (unlikely(memcg))
- goto from_memcg;
-
- objcg = READ_ONCE(current->objcg);
- if (unlikely((unsigned long)objcg & CURRENT_OBJCG_UPDATE_FLAG))
- objcg = current_objcg_update();
-
- if (objcg) {
- obj_cgroup_get(objcg);
- return objcg;
- }
- } else {
- memcg = this_cpu_read(int_active_memcg);
- if (unlikely(memcg))
- goto from_memcg;
- }
- return NULL;
-
-from_memcg:
- rcu_read_lock();
- objcg = __get_obj_cgroup_from_memcg(memcg);
- rcu_read_unlock();
- return objcg;
-}
-
__always_inline struct obj_cgroup *current_obj_cgroup(void)
{
struct mem_cgroup *memcg;
--
2.42.0
Similar to slab and kmem, switch to a scope-based protection of the
objcg pointer to avoid.
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
---
mm/percpu.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/mm/percpu.c b/mm/percpu.c
index a7665de8485f..f53ba692d67a 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1628,14 +1628,12 @@ static bool pcpu_memcg_pre_alloc_hook(size_t size, gfp_t gfp,
if (!memcg_kmem_online() || !(gfp & __GFP_ACCOUNT))
return true;
- objcg = get_obj_cgroup_from_current();
+ objcg = current_obj_cgroup();
if (!objcg)
return true;
- if (obj_cgroup_charge(objcg, gfp, pcpu_obj_full_size(size))) {
- obj_cgroup_put(objcg);
+ if (obj_cgroup_charge(objcg, gfp, pcpu_obj_full_size(size)))
return false;
- }
*objcgp = objcg;
return true;
@@ -1649,6 +1647,7 @@ static void pcpu_memcg_post_alloc_hook(struct obj_cgroup *objcg,
return;
if (likely(chunk && chunk->obj_cgroups)) {
+ obj_cgroup_get(objcg);
chunk->obj_cgroups[off >> PCPU_MIN_ALLOC_SHIFT] = objcg;
rcu_read_lock();
@@ -1657,7 +1656,6 @@ static void pcpu_memcg_post_alloc_hook(struct obj_cgroup *objcg,
rcu_read_unlock();
} else {
obj_cgroup_uncharge(objcg, pcpu_obj_full_size(size));
- obj_cgroup_put(objcg);
}
}
--
2.42.0
To charge a freshly allocated kernel object to a memory cgroup, the
kernel needs to obtain an objcg pointer. Currently it does it
indirectly by obtaining the memcg pointer first and then calling to
__get_obj_cgroup_from_memcg().
Usually tasks spend their entire life belonging to the same object
cgroup. So it makes sense to save the objcg pointer on task_struct
directly, so it can be obtained faster. It requires some work on fork,
exit and cgroup migrate paths, but these paths are way colder.
To avoid any costly synchronization the following rules are applied:
1) A task sets it's objcg pointer itself.
2) If a task is being migrated to another cgroup, the least
significant bit of the objcg pointer is set atomically.
3) On the allocation path the objcg pointer is obtained locklessly
using the READ_ONCE() macro and the least significant bit is
checked. If it's set, the following procedure is used to update
it locklessly:
- task->objcg is zeroed using cmpxcg
- new objcg pointer is obtained
- task->objcg is updated using try_cmpxchg
- operation is repeated if try_cmpxcg fails
It guarantees that no updates will be lost if task migration
is racing against objcg pointer update. It also allows to keep
both read and write paths fully lockless.
Because the task is keeping a reference to the objcg, it can't go away
while the task is alive.
This commit doesn't change the way the remote memcg charging works.
Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Shakeel Butt <[email protected]>
---
include/linux/sched.h | 4 ++
mm/memcontrol.c | 139 +++++++++++++++++++++++++++++++++++++++---
2 files changed, 134 insertions(+), 9 deletions(-)
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 77f01ac385f7..60de42715b56 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1443,6 +1443,10 @@ struct task_struct {
struct mem_cgroup *active_memcg;
#endif
+#ifdef CONFIG_MEMCG_KMEM
+ struct obj_cgroup *objcg;
+#endif
+
#ifdef CONFIG_BLK_CGROUP
struct gendisk *throttle_disk;
#endif
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 16ac2a5838fb..4c4b1f85f939 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -249,6 +249,9 @@ struct mem_cgroup *vmpressure_to_memcg(struct vmpressure *vmpr)
return container_of(vmpr, struct mem_cgroup, vmpressure);
}
+#define CURRENT_OBJCG_UPDATE_BIT 0
+#define CURRENT_OBJCG_UPDATE_FLAG (1UL << CURRENT_OBJCG_UPDATE_BIT)
+
#ifdef CONFIG_MEMCG_KMEM
static DEFINE_SPINLOCK(objcg_lock);
@@ -3001,6 +3004,58 @@ static struct obj_cgroup *__get_obj_cgroup_from_memcg(struct mem_cgroup *memcg)
return objcg;
}
+static struct obj_cgroup *current_objcg_update(void)
+{
+ struct mem_cgroup *memcg;
+ struct obj_cgroup *old, *objcg = NULL;
+
+ do {
+ /* Atomically drop the update bit. */
+ old = xchg(¤t->objcg, NULL);
+ if (old) {
+ old = (struct obj_cgroup *)
+ ((unsigned long)old & ~CURRENT_OBJCG_UPDATE_FLAG);
+ if (old)
+ obj_cgroup_put(old);
+
+ old = NULL;
+ }
+
+ /* If new objcg is NULL, no reason for the second atomic update. */
+ if (!current->mm || (current->flags & PF_KTHREAD))
+ return NULL;
+
+ /*
+ * Release the objcg pointer from the previous iteration,
+ * if try_cmpxcg() below fails.
+ */
+ if (unlikely(objcg)) {
+ obj_cgroup_put(objcg);
+ objcg = NULL;
+ }
+
+ /*
+ * Obtain the new objcg pointer. The current task can be
+ * asynchronously moved to another memcg and the previous
+ * memcg can be offlined. So let's get the memcg pointer
+ * and try get a reference to objcg under a rcu read lock.
+ */
+
+ rcu_read_lock();
+ memcg = mem_cgroup_from_task(current);
+ objcg = __get_obj_cgroup_from_memcg(memcg);
+ rcu_read_unlock();
+
+ /*
+ * Try set up a new objcg pointer atomically. If it
+ * fails, it means the update flag was set concurrently, so
+ * the whole procedure should be repeated.
+ */
+ } while (!try_cmpxchg(¤t->objcg, &old, objcg));
+
+ return objcg;
+}
+
__always_inline struct obj_cgroup *get_obj_cgroup_from_current(void)
{
struct mem_cgroup *memcg;
@@ -3008,19 +3063,26 @@ __always_inline struct obj_cgroup *get_obj_cgroup_from_current(void)
if (in_task()) {
memcg = current->active_memcg;
+ if (unlikely(memcg))
+ goto from_memcg;
- /* Memcg to charge can't be determined. */
- if (likely(!memcg) && (!current->mm || (current->flags & PF_KTHREAD)))
- return NULL;
+ objcg = READ_ONCE(current->objcg);
+ if (unlikely((unsigned long)objcg & CURRENT_OBJCG_UPDATE_FLAG))
+ objcg = current_objcg_update();
+
+ if (objcg) {
+ obj_cgroup_get(objcg);
+ return objcg;
+ }
} else {
memcg = this_cpu_read(int_active_memcg);
- if (likely(!memcg))
- return NULL;
+ if (unlikely(memcg))
+ goto from_memcg;
}
+ return NULL;
+from_memcg:
rcu_read_lock();
- if (!memcg)
- memcg = mem_cgroup_from_task(current);
objcg = __get_obj_cgroup_from_memcg(memcg);
rcu_read_unlock();
return objcg;
@@ -6345,6 +6407,7 @@ static void mem_cgroup_move_task(void)
mem_cgroup_clear_mc();
}
}
+
#else /* !CONFIG_MMU */
static int mem_cgroup_can_attach(struct cgroup_taskset *tset)
{
@@ -6358,8 +6421,39 @@ static void mem_cgroup_move_task(void)
}
#endif
+#ifdef CONFIG_MEMCG_KMEM
+static void mem_cgroup_fork(struct task_struct *task)
+{
+ /*
+ * Set the update flag to cause task->objcg to be initialized lazily
+ * on the first allocation. It can be done without any synchronization
+ * because it's always performed on the current task, so does
+ * current_objcg_update().
+ */
+ task->objcg = (struct obj_cgroup *)CURRENT_OBJCG_UPDATE_FLAG;
+}
+
+static void mem_cgroup_exit(struct task_struct *task)
+{
+ struct obj_cgroup *objcg = task->objcg;
+
+ objcg = (struct obj_cgroup *)
+ ((unsigned long)objcg & ~CURRENT_OBJCG_UPDATE_FLAG);
+ if (objcg)
+ obj_cgroup_put(objcg);
+
+ /*
+ * Some kernel allocations can happen after this point,
+ * but let's ignore them. It can be done without any synchronization
+ * because it's always performed on the current task, so does
+ * current_objcg_update().
+ */
+ task->objcg = NULL;
+}
+#endif
+
#ifdef CONFIG_LRU_GEN
-static void mem_cgroup_attach(struct cgroup_taskset *tset)
+static void mem_cgroup_lru_gen_attach(struct cgroup_taskset *tset)
{
struct task_struct *task;
struct cgroup_subsys_state *css;
@@ -6377,10 +6471,31 @@ static void mem_cgroup_attach(struct cgroup_taskset *tset)
task_unlock(task);
}
#else
+static void mem_cgroup_lru_gen_attach(struct cgroup_taskset *tset) {}
+#endif /* CONFIG_LRU_GEN */
+
+#ifdef CONFIG_MEMCG_KMEM
+static void mem_cgroup_kmem_attach(struct cgroup_taskset *tset)
+{
+ struct task_struct *task;
+ struct cgroup_subsys_state *css;
+
+ cgroup_taskset_for_each(task, css, tset) {
+ /* atomically set the update bit */
+ set_bit(CURRENT_OBJCG_UPDATE_BIT, (unsigned long *)&task->objcg);
+ }
+}
+#else
+static void mem_cgroup_kmem_attach(struct cgroup_taskset *tset) {}
+#endif /* CONFIG_MEMCG_KMEM */
+
+#if defined(CONFIG_LRU_GEN) || defined(CONFIG_MEMCG_KMEM)
static void mem_cgroup_attach(struct cgroup_taskset *tset)
{
+ mem_cgroup_lru_gen_attach(tset);
+ mem_cgroup_kmem_attach(tset);
}
-#endif /* CONFIG_LRU_GEN */
+#endif
static int seq_puts_memcg_tunable(struct seq_file *m, unsigned long value)
{
@@ -6824,9 +6939,15 @@ struct cgroup_subsys memory_cgrp_subsys = {
.css_reset = mem_cgroup_css_reset,
.css_rstat_flush = mem_cgroup_css_rstat_flush,
.can_attach = mem_cgroup_can_attach,
+#if defined(CONFIG_LRU_GEN) || defined(CONFIG_MEMCG_KMEM)
.attach = mem_cgroup_attach,
+#endif
.cancel_attach = mem_cgroup_cancel_attach,
.post_attach = mem_cgroup_move_task,
+#ifdef CONFIG_MEMCG_KMEM
+ .fork = mem_cgroup_fork,
+ .exit = mem_cgroup_exit,
+#endif
.dfl_cftypes = memory_files,
.legacy_cftypes = mem_cgroup_legacy_files,
.early_init = 0,
--
2.42.0
On 10/20/23 00:53, Roman Gushchin wrote:
> To charge a freshly allocated kernel object to a memory cgroup, the
> kernel needs to obtain an objcg pointer. Currently it does it
> indirectly by obtaining the memcg pointer first and then calling to
> __get_obj_cgroup_from_memcg().
>
> Usually tasks spend their entire life belonging to the same object
> cgroup. So it makes sense to save the objcg pointer on task_struct
> directly, so it can be obtained faster. It requires some work on fork,
> exit and cgroup migrate paths, but these paths are way colder.
>
> To avoid any costly synchronization the following rules are applied:
> 1) A task sets it's objcg pointer itself.
>
> 2) If a task is being migrated to another cgroup, the least
> significant bit of the objcg pointer is set atomically.
>
> 3) On the allocation path the objcg pointer is obtained locklessly
> using the READ_ONCE() macro and the least significant bit is
> checked. If it's set, the following procedure is used to update
> it locklessly:
> - task->objcg is zeroed using cmpxcg
> - new objcg pointer is obtained
> - task->objcg is updated using try_cmpxchg
> - operation is repeated if try_cmpxcg fails
> It guarantees that no updates will be lost if task migration
> is racing against objcg pointer update. It also allows to keep
> both read and write paths fully lockless.
>
> Because the task is keeping a reference to the objcg, it can't go away
> while the task is alive.
>
> This commit doesn't change the way the remote memcg charging works.
>
> Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
> Tested-by: Naresh Kamboju <[email protected]>
> Acked-by: Johannes Weiner <[email protected]>
> Acked-by: Shakeel Butt <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
On 10/20/23 00:53, Roman Gushchin wrote:
> Reimplement get_obj_cgroup_from_current() using current_obj_cgroup().
> get_obj_cgroup_from_current() and current_obj_cgroup() share 80% of
> the code, so the new implementation is almost trivial.
Great.
> get_obj_cgroup_from_current() is a convenient function used by the
> bpf subsystem, so there is no reason to get rid of it completely.
>
> Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Reviwed-by: Vlastimil Babka <[email protected]>
Thanks!
On Thu, Oct 19, 2023 at 3:54 PM Roman Gushchin <[email protected]> wrote:
>
> Reimplement get_obj_cgroup_from_current() using current_obj_cgroup().
> get_obj_cgroup_from_current() and current_obj_cgroup() share 80% of
> the code, so the new implementation is almost trivial.
>
> get_obj_cgroup_from_current() is a convenient function used by the
> bpf subsystem, so there is no reason to get rid of it completely.
>
> Signed-off-by: Roman Gushchin (Cruise) <[email protected]>
Acked-by: Shakeel Butt <[email protected]>