2021-03-17 18:21:19

by Enric Balletbo i Serra

[permalink] [raw]
Subject: [PATCH v2 0/2] soc: mediatek: Prepare MMSYS for DDP routing using tables

Dear all,

This is the second version of this series intended to prepare the
mtk-mmsys driver to allow different DDP (Data Display Path) routing
tables per SoC. Note that the series has been tested only on MT8173 platform,
for MT2701 and MT2712 based devices we're using a default routing table
that should just work.

Thanks,
Enric

Changes in v2:
- Use a default table for mt2701, mt2712 and mt8173.
- Remove the mask field from routes struct as is not needed.

CK Hu (2):
soc: mediatek: mmsys: Create struct mtk_mmsys to store context data
soc: mediatek: mmsys: Use an array for setting the routing registers

drivers/soc/mediatek/mtk-mmsys.c | 300 +++++--------------------------
drivers/soc/mediatek/mtk-mmsys.h | 215 ++++++++++++++++++++++
2 files changed, 257 insertions(+), 258 deletions(-)
create mode 100644 drivers/soc/mediatek/mtk-mmsys.h

--
2.30.2


2021-03-30 09:12:19

by Matthias Brugger

[permalink] [raw]
Subject: Re: [PATCH v2 0/2] soc: mediatek: Prepare MMSYS for DDP routing using tables



On 17/03/2021 19:17, Enric Balletbo i Serra wrote:
> Dear all,
>
> This is the second version of this series intended to prepare the
> mtk-mmsys driver to allow different DDP (Data Display Path) routing
> tables per SoC. Note that the series has been tested only on MT8173 platform,
> for MT2701 and MT2712 based devices we're using a default routing table
> that should just work.

That's a good base to improve the driver.
Things I'd like to see:

Split the mmsys_default_routing_table in the SoC specific one. But each SoC
specific routing table in a new header file.

Whole series applied to v5.12-next/soc

Thanks a lot!
Matthias

>
> Thanks,
> Enric
>
> Changes in v2:
> - Use a default table for mt2701, mt2712 and mt8173.
> - Remove the mask field from routes struct as is not needed.
>
> CK Hu (2):
> soc: mediatek: mmsys: Create struct mtk_mmsys to store context data
> soc: mediatek: mmsys: Use an array for setting the routing registers
>
> drivers/soc/mediatek/mtk-mmsys.c | 300 +++++--------------------------
> drivers/soc/mediatek/mtk-mmsys.h | 215 ++++++++++++++++++++++
> 2 files changed, 257 insertions(+), 258 deletions(-)
> create mode 100644 drivers/soc/mediatek/mtk-mmsys.h
>