Currently NCSI driver will send several NCSI commands back to back without
waiting the response of previous NCSI command or timeout in some state
when NIC have multi channel. This operation against the single thread
manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1)
According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe
one channel at a time by sending NCSI commands (Clear initial state, Get
version ID, Get capabilities...), than repeat this steps until the max
number of channels which we got from NCSI command (Get capabilities) has
been probed.
Signed-off-by: DelphineCCChiu <[email protected]>
---
net/ncsi/internal.h | 2 ++
net/ncsi/ncsi-manage.c | 73 +++++++++++++++++++++---------------------
net/ncsi/ncsi-rsp.c | 4 ++-
3 files changed, 41 insertions(+), 38 deletions(-)
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 374412ed780b..ef0f8f73826f 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -325,6 +325,7 @@ struct ncsi_dev_priv {
spinlock_t lock; /* Protect the NCSI device */
unsigned int package_probe_id;/* Current ID during probe */
unsigned int package_num; /* Number of packages */
+ unsigned int channel_probe_id;/* Current cahnnel ID during probe */
struct list_head packages; /* List of packages */
struct ncsi_channel *hot_channel; /* Channel was ever active */
struct ncsi_request requests[256]; /* Request table */
@@ -343,6 +344,7 @@ struct ncsi_dev_priv {
bool multi_package; /* Enable multiple packages */
bool mlx_multi_host; /* Enable multi host Mellanox */
u32 package_whitelist; /* Packages to configure */
+ unsigned char channel_count; /* Num of channels to probe */
};
struct ncsi_cmd_arg {
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 745c788f1d1d..5ecf611c8820 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -510,17 +510,19 @@ static void ncsi_suspend_channel(struct ncsi_dev_priv *ndp)
break;
case ncsi_dev_state_suspend_gls:
- ndp->pending_req_num = np->channel_num;
+ ndp->pending_req_num = 1;
nca.type = NCSI_PKT_CMD_GLS;
nca.package = np->id;
+ nca.channel = ndp->channel_probe_id;
+ ret = ncsi_xmit_cmd(&nca);
+ if (ret)
+ goto error;
+ ndp->channel_probe_id++;
- nd->state = ncsi_dev_state_suspend_dcnt;
- NCSI_FOR_EACH_CHANNEL(np, nc) {
- nca.channel = nc->id;
- ret = ncsi_xmit_cmd(&nca);
- if (ret)
- goto error;
+ if (ndp->channel_probe_id == ndp->channel_count) {
+ ndp->channel_probe_id = 0;
+ nd->state = ncsi_dev_state_suspend_dcnt;
}
break;
@@ -1345,7 +1347,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
{
struct ncsi_dev *nd = &ndp->ndev;
struct ncsi_package *np;
- struct ncsi_channel *nc;
struct ncsi_cmd_arg nca;
unsigned char index;
int ret;
@@ -1423,23 +1424,6 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
nd->state = ncsi_dev_state_probe_cis;
break;
- case ncsi_dev_state_probe_cis:
- ndp->pending_req_num = NCSI_RESERVED_CHANNEL;
-
- /* Clear initial state */
- nca.type = NCSI_PKT_CMD_CIS;
- nca.package = ndp->active_package->id;
- for (index = 0; index < NCSI_RESERVED_CHANNEL; index++) {
- nca.channel = index;
- ret = ncsi_xmit_cmd(&nca);
- if (ret)
- goto error;
- }
-
- nd->state = ncsi_dev_state_probe_gvi;
- if (IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY))
- nd->state = ncsi_dev_state_probe_keep_phy;
- break;
case ncsi_dev_state_probe_keep_phy:
ndp->pending_req_num = 1;
@@ -1452,14 +1436,17 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
nd->state = ncsi_dev_state_probe_gvi;
break;
+ case ncsi_dev_state_probe_cis:
case ncsi_dev_state_probe_gvi:
case ncsi_dev_state_probe_gc:
case ncsi_dev_state_probe_gls:
np = ndp->active_package;
- ndp->pending_req_num = np->channel_num;
+ ndp->pending_req_num = 1;
- /* Retrieve version, capability or link status */
- if (nd->state == ncsi_dev_state_probe_gvi)
+ /* Clear initial state Retrieve version, capability or link status */
+ if (nd->state == ncsi_dev_state_probe_cis)
+ nca.type = NCSI_PKT_CMD_CIS;
+ else if (nd->state == ncsi_dev_state_probe_gvi)
nca.type = NCSI_PKT_CMD_GVI;
else if (nd->state == ncsi_dev_state_probe_gc)
nca.type = NCSI_PKT_CMD_GC;
@@ -1467,19 +1454,29 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
nca.type = NCSI_PKT_CMD_GLS;
nca.package = np->id;
- NCSI_FOR_EACH_CHANNEL(np, nc) {
- nca.channel = nc->id;
- ret = ncsi_xmit_cmd(&nca);
- if (ret)
- goto error;
- }
+ nca.channel = ndp->channel_probe_id;
- if (nd->state == ncsi_dev_state_probe_gvi)
+ ret = ncsi_xmit_cmd(&nca);
+ if (ret)
+ goto error;
+
+ if (nd->state == ncsi_dev_state_probe_cis) {
+ nd->state = ncsi_dev_state_probe_gvi;
+ if (IS_ENABLED(CONFIG_NCSI_OEM_CMD_KEEP_PHY) && ndp->channel_probe_id == 0)
+ nd->state = ncsi_dev_state_probe_keep_phy;
+ } else if (nd->state == ncsi_dev_state_probe_gvi) {
nd->state = ncsi_dev_state_probe_gc;
- else if (nd->state == ncsi_dev_state_probe_gc)
+ } else if (nd->state == ncsi_dev_state_probe_gc) {
nd->state = ncsi_dev_state_probe_gls;
- else
+ } else {
+ nd->state = ncsi_dev_state_probe_cis;
+ ndp->channel_probe_id++;
+ }
+
+ if (ndp->channel_probe_id == ndp->channel_count) {
+ ndp->channel_probe_id = 0;
nd->state = ncsi_dev_state_probe_dp;
+ }
break;
case ncsi_dev_state_probe_dp:
ndp->pending_req_num = 1;
@@ -1780,6 +1777,7 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
ndp->requests[i].ndp = ndp;
timer_setup(&ndp->requests[i].timer, ncsi_request_timeout, 0);
}
+ ndp->channel_count = NCSI_RESERVED_CHANNEL;
spin_lock_irqsave(&ncsi_dev_lock, flags);
list_add_tail_rcu(&ndp->node, &ncsi_dev_list);
@@ -1813,6 +1811,7 @@ int ncsi_start_dev(struct ncsi_dev *nd)
if (!(ndp->flags & NCSI_DEV_PROBED)) {
ndp->package_probe_id = 0;
+ ndp->channel_probe_id = 0;
nd->state = ncsi_dev_state_probe;
schedule_work(&ndp->work);
return 0;
diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
index bee290d0f48b..e28be33bdf2c 100644
--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -795,12 +795,13 @@ static int ncsi_rsp_handler_gc(struct ncsi_request *nr)
struct ncsi_rsp_gc_pkt *rsp;
struct ncsi_dev_priv *ndp = nr->ndp;
struct ncsi_channel *nc;
+ struct ncsi_package *np;
size_t size;
/* Find the channel */
rsp = (struct ncsi_rsp_gc_pkt *)skb_network_header(nr->rsp);
ncsi_find_package_and_channel(ndp, rsp->rsp.common.channel,
- NULL, &nc);
+ &np, &nc);
if (!nc)
return -ENODEV;
@@ -835,6 +836,7 @@ static int ncsi_rsp_handler_gc(struct ncsi_request *nr)
*/
nc->vlan_filter.bitmap = U64_MAX;
nc->vlan_filter.n_vids = rsp->vlan_cnt;
+ np->ndp->channel_count = rsp->channel_cnt;
return 0;
}
--
2.25.1
Hi,
On Wed, 2024-05-22 at 09:25 +0800, DelphineCCChiu wrote:
> Currently NCSI driver will send several NCSI commands back to back without
> waiting the response of previous NCSI command or timeout in some state
> when NIC have multi channel. This operation against the single thread
> manner defined by NCSI SPEC(section 6.3.2.3 in DSP0222_1.1.1)
>
> According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should probe
> one channel at a time by sending NCSI commands (Clear initial state, Get
> version ID, Get capabilities...), than repeat this steps until the max
> number of channels which we got from NCSI command (Get capabilities) has
> been probed.
>
> Signed-off-by: DelphineCCChiu <[email protected]>
As noted by Jakub, this looks like a fix. Please include a suitable
Fixes tag in the tag area and the target tree 'net' inside the subject
prefix.
Thanks!
Paolo
Hi,
> -----Original Message-----
> From: Paolo Abeni <[email protected]>
> Sent: Monday, May 27, 2024 5:11 PM
> To: Delphine_CC_Chiu/WYHQ/Wiwynn <[email protected]>;
> [email protected]; Samuel Mendoza-Jonas <[email protected]>; David
> S. Miller <[email protected]>; Eric Dumazet <[email protected]>;
> Jakub Kicinski <[email protected]>
> Cc: [email protected]; [email protected]
> Subject: Re: [PATCH v2] net/ncsi: Fix the multi thread manner of NCSI driver
>
> [External Sender]
>
> Hi,
>
> On Wed, 2024-05-22 at 09:25 +0800, DelphineCCChiu wrote:
> > Currently NCSI driver will send several NCSI commands back to back
> > without waiting the response of previous NCSI command or timeout in
> > some state when NIC have multi channel. This operation against the
> > single thread manner defined by NCSI SPEC(section 6.3.2.3 in
> > DSP0222_1.1.1)
> >
> > According to NCSI SPEC(section 6.2.13.1 in DSP0222_1.1.1), we should
> > probe one channel at a time by sending NCSI commands (Clear initial
> > state, Get version ID, Get capabilities...), than repeat this steps
> > until the max number of channels which we got from NCSI command (Get
> > capabilities) has been probed.
> >
> > Signed-off-by: DelphineCCChiu <[email protected]>
>
> As noted by Jakub, this looks like a fix. Please include a suitable Fixes tag in the
> tag area and the target tree 'net' inside the subject prefix.
>
> Thanks!
>
> Paolo
I have sent a V3 patch which contain Fixes tag and added 'net' in subject prefix.
Thanks!