2011-05-10 15:11:56

by Par-Gunnar HJALMDAHL

[permalink] [raw]
Subject: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

This patch adds support for the ST-Ericsson CG2900
Connectivity Combo controller (Bluetooth, FM, GPS).

Signed-off-by: Par-Gunnar Hjalmdahl <[email protected]>
Acked-by: Linus Walleij <[email protected]>
---
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/cg2900/Kconfig | 70 +
drivers/staging/cg2900/Makefile | 12 +
drivers/staging/cg2900/TODO | 23 +
drivers/staging/cg2900/bluetooth/Makefile | 9 +
drivers/staging/cg2900/bluetooth/btcg2900.c | 1209 ++++++++
drivers/staging/cg2900/bluetooth/cg2900_uart.c | 2074 +++++++++++++
drivers/staging/cg2900/bluetooth/hci_ldisc.c | 657 ++++
drivers/staging/cg2900/bluetooth/hci_uart.h | 105 +
drivers/staging/cg2900/board-mop500-cg2900.c | 202 ++
drivers/staging/cg2900/devices-cg2900.c | 342 +++
drivers/staging/cg2900/devices-cg2900.h | 31 +
drivers/staging/cg2900/include/cg2900.h | 278 ++
drivers/staging/cg2900/include/cg2900_audio.h | 473 +++
drivers/staging/cg2900/include/cg2900_hci.h | 19 +
drivers/staging/cg2900/mfd/Makefile | 18 +
drivers/staging/cg2900/mfd/cg2900_audio.c | 3462 ++++++++++++++++++++++
drivers/staging/cg2900/mfd/cg2900_char_devices.c | 707 +++++
drivers/staging/cg2900/mfd/cg2900_chip.c | 3415 +++++++++++++++++++++
drivers/staging/cg2900/mfd/cg2900_chip.h | 613 ++++
drivers/staging/cg2900/mfd/cg2900_core.c | 713 +++++
drivers/staging/cg2900/mfd/cg2900_core.h | 51 +
drivers/staging/cg2900/mfd/cg2900_lib.c | 281 ++
drivers/staging/cg2900/mfd/cg2900_lib.h | 61 +
drivers/staging/cg2900/mfd/cg2900_test.c | 402 +++
drivers/staging/cg2900/mfd/stlc2690_chip.c | 1653 +++++++++++
drivers/staging/cg2900/mfd/stlc2690_chip.h | 47 +
28 files changed, 16930 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/cg2900/Kconfig
create mode 100644 drivers/staging/cg2900/Makefile
create mode 100644 drivers/staging/cg2900/TODO
create mode 100644 drivers/staging/cg2900/bluetooth/Makefile
create mode 100644 drivers/staging/cg2900/bluetooth/btcg2900.c
create mode 100644 drivers/staging/cg2900/bluetooth/cg2900_uart.c
create mode 100644 drivers/staging/cg2900/bluetooth/hci_ldisc.c
create mode 100644 drivers/staging/cg2900/bluetooth/hci_uart.h
create mode 100644 drivers/staging/cg2900/board-mop500-cg2900.c
create mode 100644 drivers/staging/cg2900/devices-cg2900.c
create mode 100644 drivers/staging/cg2900/devices-cg2900.h
create mode 100644 drivers/staging/cg2900/include/cg2900.h
create mode 100644 drivers/staging/cg2900/include/cg2900_audio.h
create mode 100644 drivers/staging/cg2900/include/cg2900_hci.h
create mode 100644 drivers/staging/cg2900/mfd/Makefile
create mode 100644 drivers/staging/cg2900/mfd/cg2900_audio.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_char_devices.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_chip.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_chip.h
create mode 100644 drivers/staging/cg2900/mfd/cg2900_core.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_core.h
create mode 100644 drivers/staging/cg2900/mfd/cg2900_lib.c
create mode 100644 drivers/staging/cg2900/mfd/cg2900_lib.h
create mode 100644 drivers/staging/cg2900/mfd/cg2900_test.c
create mode 100644 drivers/staging/cg2900/mfd/stlc2690_chip.c
create mode 100644 drivers/staging/cg2900/mfd/stlc2690_chip.h

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index dcd8a76..c9b5506 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -173,5 +173,7 @@ source "drivers/staging/gma500/Kconfig"

source "drivers/staging/altera-stapl/Kconfig"

+source "drivers/staging/cg2900/Kconfig"
+
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 7d38925..2ab6505 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217) += cptm1217/
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/
obj-$(CONFIG_DRM_PSB) += gma500/
+obj-$(CONFIG_CG2900) += cg2900/
diff --git a/drivers/staging/cg2900/Kconfig b/drivers/staging/cg2900/Kconfig
new file mode 100644
index 0000000..0d1ad7c
--- /dev/null
+++ b/drivers/staging/cg2900/Kconfig
@@ -0,0 +1,70 @@
+#
+# CG2900
+#
+
+config CG2900
+ tristate "Support ST-Ericsson CG2900 main structure"
+ depends on NET && MFD_SUPPORT
+ help
+ ST-Ericsson CG2900 Connectivity Combo controller main
+ structure.
+ Supports multiple functionalities muxed over a Bluetooth HCI H:4
+ interface.
+ CG2900 support Bluetooth, FM radio, and GPS.
+
+config CG2900_CHIP
+ tristate "Support CG2900 Connectivity controller"
+ depends on CG2900
+ help
+ ST-Ericsson CG2900 Connectivity Controller chip handler.
+ Contains chip handler performing driver initialization
+ such as patchdownload and also instantiates the supported
+ MFD devices.
+
+config STLC2690_CHIP
+ tristate "Support STLC2690 Connectivity controller"
+ depends on CG2900
+ help
+ ST-Ericsson STLC2690 Connectivity Controller chip handler.
+ Contains chip handler performing driver initialization
+ such as patchdownload and also instantiates the supported
+ MFD devices.
+
+config CG2900_UART
+ tristate "Support CG2900 UART transport"
+ depends on CG2900 && BT
+ help
+ UART driver for ST-Ericsson CG2900 Connectivity Controller.
+ Contains functions for setting baud rate and to transport
+ data to and from the CG2900 controller over UART.
+ Also handles low power handling for the CG2900 when using UART as
+ transport.
+
+config CG2900_AUDIO
+ tristate "Support CG2900 audio interface"
+ depends on CG2900
+ help
+ ST-Ericsson CG2900 Connectivity audio interface driver.
+ Gives a module the ability to setup audio paths
+ within the CG2900 controller.
+ Supports both a normal function API and using character device
+ from user space.
+
+config CG2900_TEST
+ tristate "Support CG2900 Test Char Device"
+ depends on CG2900
+ help
+ ST-Ericsson CG2900 Test Character Device driver.
+ Creates a character device which can be used by
+ a test framework in user space to emulate a connected chip.
+ Note that this is used to test the chip handler driver,
+ not to test the connected chip.
+
+config BT_CG2900
+ tristate "ST-Ericsson CG2900 Bluetooth driver"
+ depends on CG2900 && BT
+ help
+ Select if ST-Ericsson CG2900 Connectivity controller shall be used as
+ Bluetooth controller for BlueZ.
+ This driver registers to the Bluetooth stack and when opened,
+ enables the CG2900 controller in a proper way.
diff --git a/drivers/staging/cg2900/Makefile b/drivers/staging/cg2900/Makefile
new file mode 100644
index 0000000..c6414c2
--- /dev/null
+++ b/drivers/staging/cg2900/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for ST-Ericsson CG2900 connectivity combo controller
+#
+
+ccflags-y := \
+ -Idrivers/staging/cg2900/include \
+ -Iarch/arm/mach-ux500
+
+obj-$(CONFIG_CG2900) += board-mop500-cg2900.o devices-cg2900.o
+
+obj-y += mfd/
+obj-y += bluetooth/
diff --git a/drivers/staging/cg2900/TODO b/drivers/staging/cg2900/TODO
new file mode 100644
index 0000000..e122eba
--- /dev/null
+++ b/drivers/staging/cg2900/TODO
@@ -0,0 +1,23 @@
+TODO
+----
+
+ - Decide upon main driver architecture.
+
+ - Decide if the CG2900 driver should be a separate driver as today or if it
+ should be a sub-driver using the TI-ST (Shared Transport) driver that is also
+ written for a combo connectivity controller.
+
+ - Decide if cg2900_uart should register on top of hci_ldisc.c (as now) or if it
+ should instead register on top of hci_h4.c thereby reusing hci_h4
+ implementation.
+
+ - Update the hci_ldisc.c so that it will allow drivers to be registered without
+ registering them directly to the Bluetooth stack. Also extend the hci_ldisc.c
+ with more functions to abstract the tty API in a conformative way (currently
+ sometimes the tty API used, sometimes the hci_ldisc interface).
+
+ - Decide if the CG2900 driver should use imported structs and defines to create
+ Bluetooth packets as today or if the Bluetooth stack in the Kernel should be
+ extended so it is possible to use generic functions to send and receive
+ commands and events both from the Bluetooth stack itself and from external
+ drivers such as the CG2900 driver.
diff --git a/drivers/staging/cg2900/bluetooth/Makefile b/drivers/staging/cg2900/bluetooth/Makefile
new file mode 100644
index 0000000..936a4a2
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for ST-Ericsson CG2900 connectivity combo controller
+#
+
+ccflags-y := \
+ -Idrivers/staging/cg2900/include
+
+obj-$(CONFIG_BT_CG2900) += btcg2900.o
+obj-$(CONFIG_CG2900_UART) += cg2900_uart.o hci_ldisc.o
diff --git a/drivers/staging/cg2900/bluetooth/btcg2900.c b/drivers/staging/cg2900/bluetooth/btcg2900.c
new file mode 100644
index 0000000..92be28d
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/btcg2900.c
@@ -0,0 +1,1209 @@
+/*
+ * Bluetooth driver for ST-Ericsson CG2900 connectivity controller.
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected])
+ * Henrik Possung ([email protected])
+ * Josef Kindberg ([email protected])
+ * Dariusz Szymszak ([email protected])
+ * Kjell Andersson ([email protected])
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <asm/byteorder.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "cg2900.h"
+
+#define BT_HEADER_LENGTH 0x03
+
+#define STLC2690_HCI_REV 0x0600
+#define CG2900_PG1_HCI_REV 0x0101
+#define CG2900_PG2_HCI_REV 0x0200
+#define CG2900_PG1_SPECIAL_HCI_REV 0x0700
+
+#define NAME "BTCG2900 "
+
+/* Wait for 5 seconds for a response to our requests */
+#define RESP_TIMEOUT 5000
+
+/* Bluetooth error codes */
+#define HCI_ERR_NO_ERROR 0x00
+#define HCI_ERR_CMD_DISALLOWED 0x0C
+
+/**
+ * enum reset_state - RESET-states of the HCI driver.
+ *
+ * @RESET_IDLE: No reset in progress.
+ * @RESET_ACTIVATED: Reset in progress.
+ * @RESET_UNREGISTERED: hdev is unregistered.
+ */
+
+enum reset_state {
+ RESET_IDLE,
+ RESET_ACTIVATED,
+ RESET_UNREGISTERED
+};
+
+/**
+ * enum enable_state - ENABLE-states of the HCI driver.
+ *
+ * @ENABLE_IDLE: The HCI driver is loaded but not opened.
+ * @ENABLE_WAITING_BT_ENABLED_CC: The HCI driver is waiting for a command
+ * complete event from the BT chip as a
+ * response to a BT Enable (true) command.
+ * @ENABLE_BT_ENABLED: The BT chip is enabled.
+ * @ENABLE_WAITING_BT_DISABLED_CC: The HCI driver is waiting for a command
+ * complete event from the BT chip as a
+ * response to a BT Enable (false) command.
+ * @ENABLE_BT_DISABLED: The BT chip is disabled.
+ * @ENABLE_BT_ERROR: The HCI driver is in a bad state, some
+ * thing has failed and is not expected to
+ * work properly.
+ */
+enum enable_state {
+ ENABLE_IDLE,
+ ENABLE_WAITING_BT_ENABLED_CC,
+ ENABLE_BT_ENABLED,
+ ENABLE_WAITING_BT_DISABLED_CC,
+ ENABLE_BT_DISABLED,
+ ENABLE_BT_ERROR
+};
+
+/* Defines which state the driver has when BT is active */
+#define BTCG2900_ACTIVE_STATE ENABLE_BT_ENABLED
+
+/**
+ * struct btcg2900_info - Specifies HCI driver private data.
+ *
+ * This type specifies CG2900 HCI driver private data.
+ *
+ * @list: list_head struct.
+ * @parent: Parent to this BT device. All BT channels will have
+ * common parent.
+ * @cmd: Device structure for BT command channel.
+ * @evt: Device structure for BT event channel.
+ * @acl: Device structure for BT ACL channel.
+ * @pdev: Device structure for platform device.
+ * @hdev: Device structure for HCI device.
+ * @reset_state: Device enum for HCI driver reset state.
+ * @enable_state: Device enum for HCI driver BT enable state.
+ */
+struct btcg2900_info {
+ struct list_head list;
+ struct device *parent;
+ struct device *cmd;
+ struct device *evt;
+ struct device *acl;
+ struct hci_dev *hdev;
+ enum reset_state reset_state;
+ enum enable_state enable_state;
+};
+
+/**
+ * struct enable_info - Specifies data for sending enable commands.
+ *
+ * @enable: True if command should enable the functionality.
+ * @name: Name of the command, only informative.
+ * @get_cmd: Function for retrieving command.
+ * @success: State to set upon success.
+ * @awaiting_cc: State to set while waiting for response.
+ * @failed: State to set upon failure.
+ */
+struct enable_info {
+ bool enable;
+ char *name;
+ struct sk_buff* (*get_cmd)(struct btcg2900_info *info, bool enable);
+ enum enable_state success;
+ enum enable_state awaiting_cc;
+ enum enable_state failed;
+};
+
+/**
+ * struct dev_info - Specifies private data used when receiving callbacks from CG2900 driver.
+ *
+ * @hci_data_type: Type of data according to BlueZ.
+ */
+struct dev_info {
+ u8 hci_data_type;
+};
+
+/* Defines for vs_bt_enable_cmd */
+#define BT_VS_BT_ENABLE 0xFF10
+#define VS_BT_DISABLE 0x00
+#define VS_BT_ENABLE 0x01
+
+/**
+ * struct vs_bt_enable_cmd - Specifies HCI VS Bluetooth_Enable command.
+ *
+ * @op_code: HCI command op code.
+ * @len: Parameter length of command.
+ * @enable: 0 for disable BT, 1 for enable BT.
+ */
+struct vs_bt_enable_cmd {
+ __le16 op_code;
+ u8 len;
+ u8 enable;
+} __packed;
+
+/*
+ * hci_wait_queue - Main Wait Queue in HCI driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(hci_wait_queue);
+
+/*
+ * btcg2900_devices - List of active CG2900 BT devices.
+ */
+static LIST_HEAD(btcg2900_devices);
+
+/* Internal function declarations */
+static int register_bluetooth(struct btcg2900_info *info);
+
+/* Internal functions */
+
+/**
+ * get_bt_enable_cmd() - Get HCI BT enable command.
+ * @info: Device info structure.
+ * @bt_enable: true if Bluetooth IP shall be enabled, false otherwise.
+ *
+ * Returns:
+ * NULL if no command shall be sent,
+ * sk_buffer with command otherwise.
+ */
+static struct sk_buff *get_bt_enable_cmd(struct btcg2900_info *info,
+ bool bt_enable)
+{
+ struct sk_buff *skb;
+ struct vs_bt_enable_cmd *cmd;
+ struct cg2900_rev_data rev_data;
+ struct cg2900_user_data *pf_data;
+
+ pf_data = dev_get_platdata(info->cmd);
+
+ if (!pf_data->get_local_revision(pf_data, &rev_data)) {
+ BT_ERR(NAME "Couldn't get revision");
+ return NULL;
+ }
+
+ /* If connected chip does not support the command return NULL */
+ if (CG2900_PG1_SPECIAL_HCI_REV != rev_data.revision &&
+ CG2900_PG1_HCI_REV != rev_data.revision &&
+ CG2900_PG2_HCI_REV != rev_data.revision)
+ return NULL;
+
+ /* CG2900 used */
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ BT_ERR(NAME "Could not allocate skb");
+ return NULL;
+ }
+
+ cmd = (struct vs_bt_enable_cmd *)skb_put(skb, sizeof(*cmd));
+ cmd->op_code = cpu_to_le16(BT_VS_BT_ENABLE);
+ cmd->len = sizeof(*cmd) - BT_HEADER_LENGTH;
+ if (bt_enable)
+ cmd->enable = VS_BT_ENABLE;
+ else
+ cmd->enable = VS_BT_DISABLE;
+
+ return skb;
+}
+
+/**
+ * close_bt_users() - Close all BT channels.
+ * @info: HCI driver info structure.
+ */
+static void close_bt_users(struct btcg2900_info *info)
+{
+ struct cg2900_user_data *pf_data;
+
+ pf_data = dev_get_platdata(info->cmd);
+ if (pf_data->opened)
+ pf_data->close(pf_data);
+
+ pf_data = dev_get_platdata(info->acl);
+ if (pf_data->opened)
+ pf_data->close(pf_data);
+
+ pf_data = dev_get_platdata(info->evt);
+ if (pf_data->opened)
+ pf_data->close(pf_data);
+}
+
+/**
+ * handle_bt_enable_comp() - Handle received BtEnable Complete event.
+ * @info: Info structure.
+ * @skb: Buffer with data coming from device.
+ *
+ * Returns:
+ * true if data has been handled internally,
+ * false otherwise.
+ */
+static bool handle_bt_enable_comp(struct btcg2900_info *info, u8 status)
+{
+ if (info->enable_state != ENABLE_WAITING_BT_ENABLED_CC &&
+ info->enable_state != ENABLE_WAITING_BT_DISABLED_CC)
+ return false;
+ /*
+ * This is the command complete event for
+ * the HCI_Cmd_VS_Bluetooth_Enable.
+ * Check result and update state.
+ *
+ * The BT chip is enabled/disabled. Either it was enabled/
+ * disabled now (status NO_ERROR) or it was already enabled/
+ * disabled (assuming status CMD_DISALLOWED is already enabled/
+ * disabled).
+ */
+ if (status != HCI_ERR_NO_ERROR && status != HCI_ERR_CMD_DISALLOWED) {
+ BT_ERR(NAME "Could not enable/disable BT core (0x%X)",
+ status);
+ BT_DBG("New enable_state: ENABLE_BT_ERROR");
+ info->enable_state = ENABLE_BT_ERROR;
+ goto finished;
+ }
+
+ if (info->enable_state == ENABLE_WAITING_BT_ENABLED_CC) {
+ BT_DBG("New enable_state: ENABLE_BT_ENABLED");
+ info->enable_state = ENABLE_BT_ENABLED;
+ BT_INFO("CG2900 BT core is enabled");
+ } else {
+ BT_DBG("New enable_state: ENABLE_BT_DISABLED");
+ info->enable_state = ENABLE_BT_DISABLED;
+ BT_INFO("CG2900 BT core is disabled");
+ }
+
+finished:
+ /* Wake up whoever is waiting for this result. */
+ wake_up_all(&hci_wait_queue);
+ return true;
+}
+
+/**
+ * handle_bt_enable_stat() - Handle received BtEnable Status event.
+ * @info: Info structure.
+ * @skb: Buffer with data coming from device.
+ *
+ * Returns:
+ * true if data has been handled internally,
+ * false otherwise.
+ */
+static bool handle_bt_enable_stat(struct btcg2900_info *info, u8 status)
+{
+ if (info->enable_state != ENABLE_WAITING_BT_DISABLED_CC &&
+ info->enable_state != ENABLE_WAITING_BT_ENABLED_CC)
+ return false;
+
+ BT_DBG("HCI Driver received Command Status (BT enable): 0x%X", status);
+ /*
+ * This is the command status event for the HCI_Cmd_VS_Bluetooth_Enable.
+ * Just free the packet.
+ */
+ return true;
+}
+
+/**
+ * handle_rx_evt() - Check if received data is response to internal command.
+ * @info: Info structure.
+ * @skb: Buffer with data coming from device.
+ *
+ * Returns:
+ * true if data has been handled internally,
+ * false otherwise.
+ */
+static bool handle_rx_evt(struct btcg2900_info *info, struct sk_buff *skb)
+{
+ struct hci_event_hdr *evt = (struct hci_event_hdr *)skb->data;
+ struct hci_ev_cmd_complete *cmd_complete;
+ struct hci_ev_cmd_status *cmd_status;
+ u16 op_code;
+ u8 status;
+ bool pkt_handled = false;
+
+ /* If BT is active no internal packets shall be generated */
+ if (info->enable_state == BTCG2900_ACTIVE_STATE)
+ return false;
+
+ if (evt->evt == HCI_EV_CMD_COMPLETE) {
+ cmd_complete = (struct hci_ev_cmd_complete *)(evt + 1);
+ status = *((u8 *)(cmd_complete + 1));
+ op_code = le16_to_cpu(cmd_complete->opcode);
+
+ if (op_code == BT_VS_BT_ENABLE)
+ pkt_handled = handle_bt_enable_comp(info, status);
+ } else if (evt->evt == HCI_EV_CMD_STATUS) {
+ cmd_status = (struct hci_ev_cmd_status *)(evt + 1);
+ op_code = le16_to_cpu(cmd_status->opcode);
+ status = cmd_status->status;
+
+ if (op_code == BT_VS_BT_ENABLE)
+ pkt_handled = handle_bt_enable_stat(info, status);
+ }
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+/**
+ * hci_read_cb() - Callback for handling data received from CG2900 driver.
+ * @dev: Device receiving data.
+ * @skb: Buffer with data coming from device.
+ */
+static void hci_read_cb(struct cg2900_user_data *user, struct sk_buff *skb)
+{
+ int err = 0;
+ struct dev_info *dev_info;
+ struct btcg2900_info *info;
+
+ dev_info = cg2900_get_usr(user);
+ info = dev_get_drvdata(user->dev);
+
+ if (user->dev != info->evt || !handle_rx_evt(info, skb)) {
+ bt_cb(skb)->pkt_type = dev_info->hci_data_type;
+ skb->dev = (struct net_device *)info->hdev;
+ /* Update BlueZ stats */
+ info->hdev->stat.byte_rx += skb->len;
+ if (bt_cb(skb)->pkt_type == HCI_ACLDATA_PKT)
+ info->hdev->stat.acl_rx++;
+ else
+ info->hdev->stat.evt_rx++;
+
+ BT_DBG("Data receive %d bytes", skb->len);
+
+ /* Provide BlueZ with received frame*/
+ err = hci_recv_frame(skb);
+ /* If err, skb have been freed in hci_recv_frame() */
+ if (err)
+ BT_ERR(NAME "Failed in supplying packet to Bluetooth"
+ " stack (%d)", err);
+ }
+}
+
+/**
+ * hci_reset_cb() - Callback for handling reset from CG2900 driver.
+ * @dev: CPD device resetting.
+ */
+static void hci_reset_cb(struct cg2900_user_data *dev)
+{
+ int err;
+ struct btcg2900_info *info;
+ struct cg2900_user_data *pf_data;
+
+ BT_INFO(NAME "hci_reset_cb");
+
+ info = dev_get_drvdata(dev->dev);
+
+ BT_DBG("New reset_state: RESET_ACTIVATED");
+ info->reset_state = RESET_ACTIVATED;
+
+ /*
+ * Continue to deregister hdev if all channels has been reset else
+ * return.
+ */
+ pf_data = dev_get_platdata(info->acl);
+ if (pf_data->opened)
+ return;
+ pf_data = dev_get_platdata(info->cmd);
+ if (pf_data->opened)
+ return;
+ pf_data = dev_get_platdata(info->evt);
+ if (pf_data->opened)
+ return;
+
+ /*
+ * Deregister HCI device. Close and Destruct functions should
+ * in turn be called by BlueZ.
+ */
+ BT_DBG("Deregister HCI device");
+ err = hci_unregister_dev(info->hdev);
+ if (err)
+ BT_ERR(NAME "Can not deregister HCI device! (%d)", err);
+ /*
+ * Now we are in trouble. Try to register a new hdev
+ * anyway even though this will cost some memory.
+ */
+
+ wait_event_timeout(hci_wait_queue,
+ (RESET_UNREGISTERED == info->reset_state),
+ msecs_to_jiffies(RESP_TIMEOUT));
+ if (RESET_UNREGISTERED != info->reset_state)
+ /*
+ * Now we are in trouble. Try to register a new hdev
+ * anyway even though this will cost some memory.
+ */
+ BT_ERR(NAME "Timeout expired. Could not deregister HCI device");
+
+ /* Init and register hdev */
+ BT_DBG("Register HCI device");
+ err = register_bluetooth(info);
+ if (err)
+ BT_ERR(NAME "HCI Device registration error (%d)", err);
+}
+
+/**
+ * send_enable_cmd() - Send a command with only enable/disable functionality.
+ * @info: Info structure.
+ * @en_info: Enable info structure.
+ *
+ * Returns:
+ * 0 if successful,
+ * -EACCES if correct response to command is not received,
+ * Error codes from CG2900 write.
+ */
+static int send_enable_cmd(struct btcg2900_info *info,
+ struct enable_info *en_info)
+{
+ struct sk_buff *enable_cmd;
+ int err;
+ struct cg2900_user_data *pf_data;
+
+ /*
+ * Call function that returns the chip dependent enable HCI command.
+ * If NULL is returned, then no bt_enable command should be sent to the
+ * chip.
+ */
+ enable_cmd = en_info->get_cmd(info, en_info->enable);
+ if (!enable_cmd) {
+ BT_DBG("%s New enable_state: %d", en_info->name,
+ en_info->success);
+ info->enable_state = en_info->success;
+ return 0;
+ }
+
+ /* Set the HCI state before sending command to chip. */
+ BT_DBG("%s New enable_state: %d", en_info->name, en_info->awaiting_cc);
+ info->enable_state = en_info->awaiting_cc;
+
+ /* Send command to chip */
+ pf_data = dev_get_platdata(info->cmd);
+ err = pf_data->write(pf_data, enable_cmd);
+ if (err) {
+ BT_ERR("Couldn't send %s command (%d)", en_info->name, err);
+ kfree_skb(enable_cmd);
+ info->enable_state = en_info->failed;
+ return err;
+ }
+
+ /*
+ * Wait for callback to receive command complete and then wake us up
+ * again.
+ */
+ wait_event_timeout(hci_wait_queue,
+ info->enable_state == en_info->success,
+ msecs_to_jiffies(RESP_TIMEOUT));
+ /* Check the current state to see if it worked */
+ if (info->enable_state != en_info->success) {
+ BT_ERR("Could not change %s state (%d)",
+ en_info->name, info->enable_state);
+ BT_DBG("%s New enable_state: %d", en_info->name,
+ en_info->failed);
+ info->enable_state = en_info->failed;
+ return -EACCES;
+ }
+
+ return 0;
+}
+
+/**
+ * btcg2900_open() - Open HCI interface.
+ * @hdev: HCI device being opened.
+ *
+ * BlueZ callback function for opening HCI interface to device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL pointer is supplied.
+ * -EOPNOTSUPP if supplied packet type is not supported.
+ * -EBUSY if device is already opened.
+ * -EACCES if opening of channels failed.
+ */
+static int btcg2900_open(struct hci_dev *hdev)
+{
+ struct btcg2900_info *info;
+ struct cg2900_user_data *pf_data;
+ int err;
+ struct enable_info en_info;
+
+ BT_INFO("Open ST-Ericsson CG2900 driver");
+
+ if (!hdev) {
+ BT_ERR(NAME "NULL supplied for hdev");
+ return -EINVAL;
+ }
+
+ info = (struct btcg2900_info *)hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for driver_data");
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(HCI_RUNNING, &(hdev->flags))) {
+ BT_ERR(NAME "Device already opened!");
+ return -EBUSY;
+ }
+
+ pf_data = dev_get_platdata(info->acl);
+ err = pf_data->open(pf_data);
+ if (err) {
+ BT_ERR("Couldn't open BT ACL channel (%d)", err);
+ goto handle_error;
+ }
+
+ pf_data = dev_get_platdata(info->cmd);
+ err = pf_data->open(pf_data);
+ if (err) {
+ BT_ERR("Couldn't open BT CMD channel (%d)", err);
+ goto handle_error;
+ }
+
+ pf_data = dev_get_platdata(info->evt);
+ err = pf_data->open(pf_data);
+ if (err) {
+ BT_ERR("Couldn't open BT EVT channel (%d)", err);
+ goto handle_error;
+ }
+
+ if (info->reset_state == RESET_ACTIVATED) {
+ BT_DBG("New reset_state: RESET_IDLE");
+ info->reset_state = RESET_IDLE;
+ }
+
+ /* First enable the BT core */
+ en_info.enable = true;
+ en_info.get_cmd = get_bt_enable_cmd;
+ en_info.name = "VS BT Enable (true)";
+ en_info.success = ENABLE_BT_ENABLED;
+ en_info.awaiting_cc = ENABLE_WAITING_BT_ENABLED_CC;
+ en_info.failed = ENABLE_BT_DISABLED;
+
+ err = send_enable_cmd(info, &en_info);
+ if (err) {
+ BT_ERR("Couldn't enable BT core (%d)", err);
+ goto handle_error;
+ }
+
+ return 0;
+
+handle_error:
+ close_bt_users(info);
+ clear_bit(HCI_RUNNING, &(hdev->flags));
+ return err;
+
+}
+
+/**
+ * btcg2900_close() - Close HCI interface.
+ * @hdev: HCI device being closed.
+ *
+ * BlueZ callback function for closing HCI interface.
+ * It flushes the interface first.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL pointer is supplied.
+ * -EOPNOTSUPP if supplied packet type is not supported.
+ * -EBUSY if device is not opened.
+ */
+static int btcg2900_close(struct hci_dev *hdev)
+{
+ struct btcg2900_info *info = NULL;
+ int err;
+ struct enable_info en_info;
+
+ BT_DBG("btcg2900_close");
+
+ if (!hdev) {
+ BT_ERR(NAME "NULL supplied for hdev");
+ return -EINVAL;
+ }
+
+ info = (struct btcg2900_info *)hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for driver_data");
+ return -EINVAL;
+ }
+
+ if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags))) {
+ BT_ERR(NAME "Device already closed!");
+ return -EBUSY;
+ }
+
+ /* Do not do this if there is an reset ongoing */
+ if (info->reset_state == RESET_ACTIVATED)
+ goto remove_users;
+
+ /* Now disable the BT core */
+ en_info.enable = false;
+ en_info.get_cmd = get_bt_enable_cmd;
+ en_info.name = "VS BT Enable (false)";
+ en_info.success = ENABLE_BT_DISABLED;
+ en_info.awaiting_cc = ENABLE_WAITING_BT_DISABLED_CC;
+ en_info.failed = ENABLE_BT_ENABLED;
+
+ err = send_enable_cmd(info, &en_info);
+ if (err)
+ BT_ERR("Couldn't disable BT core (%d)", err);
+
+remove_users:
+ /* Finally deregister all users and free allocated data */
+ close_bt_users(info);
+ return 0;
+}
+
+/**
+ * btcg2900_send() - Send packet to device.
+ * @skb: sk buffer to be sent.
+ *
+ * BlueZ callback function for sending sk buffer.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL pointer is supplied.
+ * -EOPNOTSUPP if supplied packet type is not supported.
+ * Error codes from cg2900_write.
+ */
+static int btcg2900_send(struct sk_buff *skb)
+{
+ struct hci_dev *hdev;
+ struct btcg2900_info *info;
+ struct cg2900_user_data *pf_data;
+ int err = 0;
+
+ if (!skb) {
+ BT_ERR(NAME "NULL supplied for skb");
+ return -EINVAL;
+ }
+
+ hdev = (struct hci_dev *)(skb->dev);
+ if (!hdev) {
+ BT_ERR(NAME "NULL supplied for hdev");
+ return -EINVAL;
+ }
+
+ info = (struct btcg2900_info *)hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for info");
+ return -EINVAL;
+ }
+
+ /* Update BlueZ stats */
+ hdev->stat.byte_tx += skb->len;
+
+ BT_DBG("Data transmit %d bytes", skb->len);
+
+ switch (bt_cb(skb)->pkt_type) {
+ case HCI_COMMAND_PKT:
+ BT_DBG("Sending HCI_COMMAND_PKT");
+ pf_data = dev_get_platdata(info->cmd);
+ err = pf_data->write(pf_data, skb);
+ hdev->stat.cmd_tx++;
+ break;
+ case HCI_ACLDATA_PKT:
+ BT_DBG("Sending HCI_ACLDATA_PKT");
+ pf_data = dev_get_platdata(info->acl);
+ err = pf_data->write(pf_data, skb);
+ hdev->stat.acl_tx++;
+ break;
+ default:
+ BT_ERR(NAME "Trying to transmit unsupported packet type"
+ " (0x%.2X)", bt_cb(skb)->pkt_type);
+ err = -EOPNOTSUPP;
+ break;
+ };
+
+ return err;
+}
+
+/**
+ * btcg2900_destruct() - Destruct HCI interface.
+ * @hdev: HCI device being destructed.
+ */
+static void btcg2900_destruct(struct hci_dev *hdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("btcg2900_destruct");
+
+ info = hdev->driver_data;
+ if (!info) {
+ BT_ERR(NAME "NULL supplied for info");
+ return;
+ }
+
+ /*
+ * When destruct is called it means that the Bluetooth stack is done
+ * with the HCI device and we can now free it.
+ * Normally we do this only when removing the whole module through
+ * btcg2900_remove(), but when being reset we free the device here and
+ * we then set the reset state so that the reset handler can allocate a
+ * new HCI device and then register it to the Bluetooth stack.
+ */
+ if (info->reset_state == RESET_ACTIVATED) {
+ if (info->hdev) {
+ hci_free_dev(info->hdev);
+ info->hdev = NULL;
+ }
+ BT_DBG("New reset_state: RESET_UNREGISTERED");
+ info->reset_state = RESET_UNREGISTERED;
+ wake_up_all(&hci_wait_queue);
+ }
+}
+
+/**
+ * get_info() - Return info structure for this device.
+ * @dev: Current device.
+ *
+ * Returns:
+ * Pointer to info struct if there is no error.
+ * ERR_PTR(-ENOMEM) if allocation fails.
+ */
+static struct btcg2900_info *get_info(struct device *dev)
+{
+ struct list_head *cursor;
+ struct btcg2900_info *tmp;
+ struct btcg2900_info *info = NULL;
+
+ /* Find the info structure */
+ list_for_each(cursor, &btcg2900_devices) {
+ tmp = list_entry(cursor, struct btcg2900_info, list);
+ if (tmp->parent == dev->parent) {
+ info = tmp;
+ break;
+ }
+ }
+
+ if (info)
+ return info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ BT_ERR("Could not allocate info struct");
+ return ERR_PTR(-ENOMEM);
+ }
+ info->parent = dev->parent;
+ list_add_tail(&info->list, &btcg2900_devices);
+ BT_DBG("CG2900 device added");
+ return info;
+}
+
+/**
+ * device_removed() - Remove device from list if there are no channels left.
+ * @info: BTCG2900 info structure.
+ */
+static void device_removed(struct btcg2900_info *info)
+{
+ struct list_head *cursor;
+ struct btcg2900_info *tmp;
+
+ if (info->acl || info->cmd || info->evt)
+ /* There are still devices active */
+ return;
+
+ /* Find the info structure and delete it */
+ list_for_each(cursor, &btcg2900_devices) {
+ tmp = list_entry(cursor, struct btcg2900_info, list);
+ if (tmp == info) {
+ list_del(cursor);
+ break;
+ }
+ }
+ kfree(info);
+ BT_DBG("CG2900 device removed");
+}
+
+/**
+ * register_bluetooth() - Initialize module.
+ *
+ * Alloc, init, and register HCI device to BlueZ.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * Error codes from hci_register_dev.
+ */
+static int register_bluetooth(struct btcg2900_info *info)
+{
+ int err;
+ struct cg2900_user_data *pf_data;
+
+ /* Check if all channels have been probed */
+ if (!info->acl || !info->cmd || !info->evt)
+ return 0;
+
+ pf_data = dev_get_platdata(info->cmd);
+
+ info->hdev = hci_alloc_dev();
+ if (!info->hdev) {
+ BT_ERR("Could not allocate mem for CG2900 BT driver");
+ return -ENOMEM;
+ }
+
+ SET_HCIDEV_DEV(info->hdev, info->parent);
+ info->hdev->bus = pf_data->channel_data.bt_bus;
+ info->hdev->driver_data = info;
+ info->hdev->owner = THIS_MODULE;
+ info->hdev->open = btcg2900_open;
+ info->hdev->close = btcg2900_close;
+ info->hdev->send = btcg2900_send;
+ info->hdev->destruct = btcg2900_destruct;
+
+ err = hci_register_dev(info->hdev);
+ if (err) {
+ BT_ERR("Can not register BTCG2900 HCI device (%d)", err);
+ hci_free_dev(info->hdev);
+ info->hdev = NULL;
+ }
+
+ BT_INFO("CG2900 registered");
+
+ BT_DBG("New enable_state: ENABLE_IDLE");
+ info->enable_state = ENABLE_IDLE;
+ BT_DBG("New reset_state: RESET_IDLE");
+ info->reset_state = RESET_IDLE;
+
+ return err;
+}
+
+/**
+ * probe_common() - Initialize channel and register to BT stack.
+ * @dev: Current device.
+ * @info: BTCG2900 info structure.
+ * @hci_data_type: Data type of this channel, e.g. ACL.
+ *
+ * Allocate and initialize private data. Register to Bluetooth stack.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * Error codes from register_bluetooth.
+ */
+static int probe_common(struct platform_device *pdev,
+ struct btcg2900_info *info,
+ u8 hci_data_type)
+{
+ int err;
+ struct cg2900_user_data *pf_data;
+ struct dev_info *dev_info;
+ struct device *dev = &pdev->dev;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info) {
+ BT_ERR("Could not allocate dev_info");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, info);
+
+ pf_data = dev_get_platdata(dev);
+ pf_data->dev = dev;
+ pf_data->read_cb = hci_read_cb;
+ pf_data->reset_cb = hci_reset_cb;
+ if (!dev_get_platdata(dev))
+ dev->platform_data = pf_data;
+ else
+ dev_err(dev, "Platform data set when it shouldn't be\n");
+
+ /* Init and register hdev */
+ err = register_bluetooth(info);
+ if (err) {
+ BT_ERR("HCI Device registration error (%d)", err);
+ kfree(dev_info);
+ return err;
+ }
+ dev_info->hci_data_type = hci_data_type;
+ cg2900_set_usr(pf_data, dev_info);
+
+ return 0;
+}
+
+/**
+ * btcg2900_cmd_probe() - Initialize command channel.
+ * @pdev: Platform device.
+ *
+ * Allocate and initialize private data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from get_info and probe_common.
+ */
+static int __devinit btcg2900_cmd_probe(struct platform_device *pdev)
+{
+ int err;
+ struct btcg2900_info *info;
+
+ BT_DBG("Starting CG2900 Command channel");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->cmd = &pdev->dev;
+
+ err = probe_common(pdev, info, HCI_COMMAND_PKT);
+ if (err) {
+ BT_ERR("Failed to initialize channel");
+ info->cmd = NULL;
+ device_removed(info);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * btcg2900_acl_probe() - Initialize command channel.
+ * @pdev: Platform device.
+ *
+ * Allocate and initialize private data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from get_info and probe_common.
+ */
+static int __devinit btcg2900_acl_probe(struct platform_device *pdev)
+{
+ int err;
+ struct btcg2900_info *info;
+
+ BT_DBG("Starting CG2900 ACL channel");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->acl = &pdev->dev;
+
+ err = probe_common(pdev, info, HCI_ACLDATA_PKT);
+ if (err) {
+ BT_ERR("Failed to initialize channel");
+ info->acl = NULL;
+ device_removed(info);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * btcg2900_evt_probe() - Initialize event channel.
+ * @pdev: Platform device.
+ *
+ * Allocate and initialize private data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from get_info and probe_common.
+ */
+static int __devinit btcg2900_evt_probe(struct platform_device *pdev)
+{
+ int err;
+ struct btcg2900_info *info;
+
+ BT_DBG("Starting CG2900 Event channel");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->evt = &pdev->dev;
+
+ err = probe_common(pdev, info, HCI_EVENT_PKT);
+ if (err) {
+ BT_ERR("Failed to initialize channel");
+ info->evt = NULL;
+ device_removed(info);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * remove_common() - Remove channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from hci_unregister_dev.
+ */
+static int remove_common(struct platform_device *pdev,
+ struct btcg2900_info *info)
+{
+ int err = 0;
+ struct cg2900_user_data *pf_data;
+ struct dev_info *dev_info;
+
+ pf_data = dev_get_platdata(&pdev->dev);
+ dev_info = cg2900_get_usr(pf_data);
+
+ kfree(dev_info);
+ cg2900_set_usr(pf_data, NULL);
+
+ if (!info->hdev)
+ goto finished;
+
+ BT_INFO("Unregistering CG2900");
+ err = hci_unregister_dev(info->hdev);
+ if (err)
+ BT_ERR("Can not unregister HCI device (%d)", err);
+ hci_free_dev(info->hdev);
+ info->hdev = NULL;
+
+finished:
+ device_removed(info);
+ return err;
+}
+
+/**
+ * btcg2900_cmd_remove() - Remove command channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from remove_common.
+ */
+static int __devexit btcg2900_cmd_remove(struct platform_device *pdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("Removing CG2900 Command channel");
+
+ info = dev_get_drvdata(&pdev->dev);
+ info->cmd = NULL;
+ return remove_common(pdev, info);
+}
+
+/**
+ * btcg2900_acl_remove() - Remove ACL channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from remove_common.
+ */
+static int __devexit btcg2900_acl_remove(struct platform_device *pdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("Removing CG2900 ACL channel");
+
+ info = dev_get_drvdata(&pdev->dev);
+ info->acl = NULL;
+ return remove_common(pdev, info);
+}
+
+/**
+ * btcg2900_evt_remove() - Remove event channel.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from remove_common.
+ */
+static int __devexit btcg2900_evt_remove(struct platform_device *pdev)
+{
+ struct btcg2900_info *info;
+
+ BT_DBG("Removing CG2900 Event channel");
+
+ info = dev_get_drvdata(&pdev->dev);
+ info->evt = NULL;
+ return remove_common(pdev, info);
+}
+
+static struct platform_driver btcg2900_cmd_driver = {
+ .driver = {
+ .name = "cg2900-btcmd",
+ .owner = THIS_MODULE,
+ },
+ .probe = btcg2900_cmd_probe,
+ .remove = __devexit_p(btcg2900_cmd_remove),
+};
+
+static struct platform_driver btcg2900_acl_driver = {
+ .driver = {
+ .name = "cg2900-btacl",
+ .owner = THIS_MODULE,
+ },
+ .probe = btcg2900_acl_probe,
+ .remove = __devexit_p(btcg2900_acl_remove),
+};
+
+static struct platform_driver btcg2900_evt_driver = {
+ .driver = {
+ .name = "cg2900-btevt",
+ .owner = THIS_MODULE,
+ },
+ .probe = btcg2900_evt_probe,
+ .remove = __devexit_p(btcg2900_evt_remove),
+};
+
+/**
+ * btcg2900_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init btcg2900_init(void)
+{
+ int err;
+
+ BT_DBG("btcg2900_init");
+
+ err = platform_driver_register(&btcg2900_cmd_driver);
+ if (err) {
+ BT_ERR("Failed to register cmd (%d)", err);
+ return err;
+ }
+ err = platform_driver_register(&btcg2900_acl_driver);
+ if (err) {
+ BT_ERR("Failed to register acl (%d)", err);
+ return err;
+ }
+ err = platform_driver_register(&btcg2900_evt_driver);
+ if (err) {
+ BT_ERR("Failed to register evt (%d)", err);
+ return err;
+ }
+ return err;
+}
+
+/**
+ * btcg2900_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit btcg2900_exit(void)
+{
+ BT_DBG("btcg2900_exit");
+ platform_driver_unregister(&btcg2900_cmd_driver);
+ platform_driver_unregister(&btcg2900_acl_driver);
+ platform_driver_unregister(&btcg2900_evt_driver);
+}
+
+module_init(btcg2900_init);
+module_exit(btcg2900_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_AUTHOR("Henrik Possung ST-Ericsson");
+MODULE_AUTHOR("Josef Kindberg ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth HCI H:4 Driver for ST-Ericsson controller");
diff --git a/drivers/staging/cg2900/bluetooth/cg2900_uart.c b/drivers/staging/cg2900/bluetooth/cg2900_uart.c
new file mode 100644
index 0000000..4417525
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/cg2900_uart.c
@@ -0,0 +1,2074 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * Lukasz Rymanowski ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth UART Driver for ST-Ericsson CG2900 connectivity controller.
+ */
+#define NAME "cg2900_uart"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/atomic.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/timer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/tty.h>
+#include <linux/tty_ldisc.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+
+#include "hci_uart.h"
+
+#define MAIN_DEV (uart_info->dev)
+
+/* Workqueues' names */
+#define UART_WQ_NAME "cg2900_uart_wq"
+#define UART_NAME "cg2900_uart"
+
+/*
+ * A BT command complete event without any parameters is the defined size plus
+ * 1 byte extra for the status field which is always present in a
+ * command complete event.
+ */
+#define HCI_BT_CMD_COMPLETE_LEN (sizeof(struct hci_ev_cmd_complete) + 1)
+
+/* Timers used in milliseconds */
+#define UART_TX_TIMEOUT 100
+#define UART_RX_TIMEOUT 20
+#define UART_RESP_TIMEOUT 1000
+#define UART_RESUME_TIMEOUT 20
+
+/* Number of bytes to reserve at start of sk_buffer when receiving packet */
+#define RX_SKB_RESERVE 8
+/* Max size of received packet (not including reserved bytes) */
+#define RX_SKB_MAX_SIZE 1024
+
+/* Size of the header in the different packets */
+#define HCI_BT_EVT_HDR_SIZE 2
+#define HCI_BT_ACL_HDR_SIZE 4
+#define HCI_FM_RADIO_HDR_SIZE 1
+#define HCI_GNSS_HDR_SIZE 3
+
+/* Position of length field in the different packets */
+#define HCI_EVT_LEN_POS 2
+#define HCI_ACL_LEN_POS 3
+#define FM_RADIO_LEN_POS 1
+#define GNSS_LEN_POS 2
+
+/* Baud rate defines */
+#define ZERO_BAUD_RATE 0
+#define DEFAULT_BAUD_RATE 115200
+#define HIGH_BAUD_RATE 3000000
+
+#define BT_SIZE_OF_HDR (sizeof(__le16) + sizeof(__u8))
+#define BT_PARAM_LEN(__pkt_len) (__pkt_len - BT_SIZE_OF_HDR)
+
+/* Standardized Bluetooth H:4 channels */
+#define HCI_BT_CMD_H4_CHANNEL 0x01
+#define HCI_BT_ACL_H4_CHANNEL 0x02
+#define HCI_BT_SCO_H4_CHANNEL 0x03
+#define HCI_BT_EVT_H4_CHANNEL 0x04
+
+#define BT_BDADDR_SIZE 6
+
+/* Reserve 1 byte for the HCI H:4 header */
+#define HCI_H4_SIZE 1
+#define CG2900_SKB_RESERVE HCI_H4_SIZE
+
+/* Default H4 channels which may change depending on connected controller */
+#define HCI_FM_RADIO_H4_CHANNEL 0x08
+#define HCI_GNSS_H4_CHANNEL 0x09
+
+/* Bluetooth error codes */
+#define HCI_BT_ERROR_NO_ERROR 0x00
+
+/* Bytes in the command Hci_Cmd_ST_Set_Uart_Baud_Rate */
+#define CG2900_BAUD_RATE_57600 0x03
+#define CG2900_BAUD_RATE_115200 0x02
+#define CG2900_BAUD_RATE_230400 0x01
+#define CG2900_BAUD_RATE_460800 0x00
+#define CG2900_BAUD_RATE_921600 0x20
+#define CG2900_BAUD_RATE_2000000 0x25
+#define CG2900_BAUD_RATE_3000000 0x27
+#define CG2900_BAUD_RATE_4000000 0x2B
+
+/* GNSS */
+struct gnss_hci_hdr {
+ __u8 op_code;
+ __le16 plen;
+} __packed;
+
+/* FM legacy command packet */
+struct fm_leg_cmd {
+ __u8 length;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 fm_function;
+ union { /* Payload varies with function */
+ __le16 irqmask;
+ struct fm_leg_fm_cmd {
+ __le16 head;
+ __le16 data[];
+ } fm_cmd;
+ };
+} __packed;
+
+/* FM legacy command complete packet */
+struct fm_leg_cmd_cmpl {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 cmd_status;
+ __u8 fm_function;
+ __le16 response_head;
+ __le16 data[];
+} __packed;
+
+/* FM legacy interrupt packet, PG2 style */
+struct fm_leg_irq_v2 {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 event_type;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+/* FM legacy interrupt packet, PG1 style */
+struct fm_leg_irq_v1 {
+ __u8 param_length;
+ __u8 opcode;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+union fm_leg_evt_or_irq {
+ __u8 param_length;
+ struct fm_leg_cmd_cmpl evt;
+ struct fm_leg_irq_v2 irq_v2;
+ struct fm_leg_irq_v1 irq_v1;
+} __packed;
+
+/* BT VS SetBaudRate command */
+#define CG2900_BT_OP_VS_SET_BAUD_RATE 0xFC09
+struct bt_vs_set_baud_rate_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 baud_rate;
+} __packed;
+
+/**
+ * enum uart_rx_state - UART RX-state for UART.
+ * @W4_PACKET_TYPE: Waiting for packet type.
+ * @W4_EVENT_HDR: Waiting for BT event header.
+ * @W4_ACL_HDR: Waiting for BT ACL header.
+ * @W4_FM_RADIO_HDR: Waiting for FM header.
+ * @W4_GNSS_HDR: Waiting for GNSS header.
+ * @W4_DATA: Waiting for data in rest of the packet (after header).
+ */
+enum uart_rx_state {
+ W4_PACKET_TYPE,
+ W4_EVENT_HDR,
+ W4_ACL_HDR,
+ W4_FM_RADIO_HDR,
+ W4_GNSS_HDR,
+ W4_DATA
+};
+
+/**
+ * enum sleep_state - Sleep-state for UART.
+ * @CHIP_AWAKE: Chip is awake.
+ * @CHIP_FALLING_ASLEEP: Chip is falling asleep.
+ * @CHIP_ASLEEP: Chip is asleep.
+ * @CHIP_SUSPENDED: Chip in suspend state.
+ * @CHIP_RESUMING: Chip is going back from suspend state.
+ * @CHIP_POWERED_DOWN: Chip is off.
+ */
+enum sleep_state {
+ CHIP_AWAKE,
+ CHIP_FALLING_ASLEEP,
+ CHIP_ASLEEP,
+ CHIP_SUSPENDED,
+ CHIP_RESUMING,
+ CHIP_POWERED_DOWN
+};
+
+/**
+ * enum baud_rate_change_state - Baud rate-state for UART.
+ * @BAUD_IDLE: No baud rate change is ongoing.
+ * @BAUD_SENDING_RESET: HCI reset has been sent. Waiting for command complete
+ * event.
+ * @BAUD_START: Set baud rate cmd scheduled for sending.
+ * @BAUD_SENDING: Set baud rate cmd sending in progress.
+ * @BAUD_WAITING: Set baud rate cmd sent, waiting for command complete
+ * event.
+ * @BAUD_SUCCESS: Baud rate change has succeeded.
+ * @BAUD_FAIL: Baud rate change has failed.
+ */
+enum baud_rate_change_state {
+ BAUD_IDLE,
+ BAUD_SENDING_RESET,
+ BAUD_START,
+ BAUD_SENDING,
+ BAUD_WAITING,
+ BAUD_SUCCESS,
+ BAUD_FAIL
+};
+
+/**
+ * struct uart_work_struct - Work structure for UART module.
+ * @work: Work structure.
+ * @data: Pointer to private data.
+ *
+ * This structure is used to pack work for work queue.
+ */
+struct uart_work_struct {
+ struct work_struct work;
+ void *data;
+};
+
+/**
+ * struct uart_delayed_work_struct - Work structure for UART module.
+ * @delayed_work: Work structure.
+ * @data: Pointer to private data.
+ *
+ * This structure is used to pack work for work queue.
+ */
+struct uart_delayed_work_struct {
+ struct delayed_work work;
+ void *data;
+};
+
+/**
+ * struct uart_info - Main UART info structure.
+ * @rx_state: Current RX state.
+ * @rx_count: Number of bytes left to receive.
+ * @rx_skb: SK_buffer to store the received data into.
+ * @tx_queue: TX queue for sending data to chip.
+ * @hu: Hci uart structure.
+ * @wq: UART work queue.
+ * @baud_rate_state: UART baud rate change state.
+ * @baud_rate: Current baud rate setting.
+ * @sleep_state: UART sleep state.
+ * @sleep_work: Delayed sleep work struct.
+ * @wakeup_work: Wake-up work struct.
+ * @restart_sleep_work: Reschedule sleep_work and wake-up work struct.
+ * @sleep_state_lock: Used to protect chip state.
+ * @sleep_allowed: Indicates if tty has functions needed for sleep mode.
+ * @tx_in_progress: Indicates data sending in progress.
+ * @rx_in_progress: Indicates data receiving in progress.
+ * @transmission_lock: Spin_lock to protect tx/rx_in_progress.
+ * @regulator: Regulator.
+ * @regulator_enabled: True if regulator is enabled.
+ * @dev: Pointer to CG2900 uart device.
+ * @chip_dev: Chip device for current UART transport.
+ * @cts_irq: CTS interrupt for this UART.
+ * @cts_gpio: CTS GPIO for this UART.
+ */
+struct uart_info {
+ enum uart_rx_state rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head tx_queue;
+
+ struct hci_uart *hu;
+
+ struct workqueue_struct *wq;
+ enum baud_rate_change_state baud_rate_state;
+ int baud_rate;
+ enum sleep_state sleep_state;
+ struct uart_delayed_work_struct sleep_work;
+ struct uart_work_struct wakeup_work;
+ struct uart_work_struct restart_sleep_work;
+ struct mutex sleep_state_lock;
+ bool sleep_allowed;
+ bool tx_in_progress;
+ bool rx_in_progress;
+ spinlock_t transmission_lock;
+ struct regulator *regulator;
+ bool regulator_enabled;
+ struct device *dev;
+ struct cg2900_chip_dev chip_dev;
+ int cts_irq;
+ int cts_gpio;
+};
+
+/* Module parameters */
+static int uart_default_baud = DEFAULT_BAUD_RATE;
+static int uart_high_baud = HIGH_BAUD_RATE;
+static int uart_debug;
+
+static DECLARE_WAIT_QUEUE_HEAD(uart_wait_queue);
+
+static void wake_up_chip(struct uart_info *uart_info);
+
+/**
+ * is_chip_flow_off() - Check if chip has set flow off.
+ * @tty: Pointer to tty.
+ *
+ * Returns:
+ * true - chip flows off.
+ * false - chip flows on.
+ */
+static bool is_chip_flow_off(struct uart_info *uart_info)
+{
+ int lines;
+
+ lines = hci_uart_tiocmget(uart_info->hu);
+
+ if (lines & TIOCM_CTS)
+ return false;
+ else
+ return true;
+}
+
+/**
+ * create_work_item() - Create work item and add it to the work queue.
+ * @uart_info: Main Uart structure.
+ * @work_func: Work function.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EBUSY if not possible to queue work.
+ * -ENOMEM if allocation fails.
+ */
+static int create_work_item(struct uart_info *uart_info,
+ work_func_t work_func)
+{
+ struct uart_work_struct *new_work;
+ int res;
+
+ new_work = kmalloc(sizeof(*new_work), GFP_ATOMIC);
+ if (!new_work) {
+ dev_err(MAIN_DEV,
+ "Failed to alloc memory for uart_work_struct\n");
+ return -ENOMEM;
+ }
+
+ new_work->data = uart_info;
+ INIT_WORK(&new_work->work, work_func);
+
+ res = queue_work(uart_info->wq, &new_work->work);
+ if (!res) {
+ dev_err(MAIN_DEV,
+ "Failed to queue work_struct because it's already "
+ "in the queue\n");
+ kfree(new_work);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/**
+ * handle_cts_irq() - Called to handle CTS interrupt in work context.
+ * @work: work which needs to be done.
+ *
+ * The handle_cts_irq() function is a work handler called if interrupt on CTS
+ * occurred. It wakes up the transport.
+ */
+static void handle_cts_irq(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /* Mark that there is an ongoing transfer. */
+ uart_info->rx_in_progress = true;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ if (uart_info->sleep_state == CHIP_SUSPENDED) {
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_RESUMING\n");
+ uart_info->sleep_state = CHIP_RESUMING;
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ } else {
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ wake_up_chip(uart_info);
+ }
+
+ kfree(current_work);
+}
+
+/**
+ * cts_interrupt() - Called to handle CTS interrupt.
+ * @irq: Interrupt that occurred.
+ * @dev_id: Device ID where interrupt occurred.
+ *
+ * The cts_interrupt() function is called if interrupt on CTS occurred.
+ * It disables the interrupt and starts a new work thread to handle
+ * the interrupt.
+ */
+static irqreturn_t cts_interrupt(int irq, void *dev_id)
+{
+ struct uart_info *uart_info = dev_get_drvdata(dev_id);
+#ifdef CONFIG_PM
+ disable_irq_wake(irq);
+#endif
+ disable_irq_nosync(irq);
+
+ /* Create work and leave IRQ context. */
+ (void)create_work_item(uart_info, handle_cts_irq);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * set_cts_irq() - Enable interrupt on CTS.
+ * @uart_info: Main Uart structure.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from request_irq and disable_uart.
+ */
+static int set_cts_irq(struct uart_info *uart_info)
+{
+ int err;
+ int cts_val = 0;
+
+ /* Set IRQ on CTS. */
+ err = request_irq(uart_info->cts_irq,
+ cts_interrupt,
+ IRQF_TRIGGER_FALLING,
+ UART_NAME,
+ uart_info->dev);
+ if (err) {
+ dev_err(MAIN_DEV, "Could not request CTS IRQ (%d)\n", err);
+ return err;
+ }
+
+ /*
+ * It may happen that there was already an interrupt on CTS just before
+ * the enable_irq() call above. If the CTS line is low now it means that
+ * it's happened, so disable the CTS interrupt and return -ECANCELED.
+ */
+ cts_val = gpio_get_value(uart_info->cts_gpio);
+ if (!cts_val) {
+ dev_dbg(MAIN_DEV, "Missed interrupt, going back to "
+ "awake state\n");
+ free_irq(uart_info->cts_irq, uart_info->dev);
+ return -ECANCELED;
+ }
+
+#ifdef CONFIG_PM
+ enable_irq_wake(uart_info->cts_irq);
+#endif
+ return 0;
+}
+
+/**
+ * disable_uart_pins() - Disable the UART pins.
+ * @uart_info: Main Uart structure.
+ */
+static void disable_uart_pins(struct uart_info *uart_info)
+{
+ struct cg2900_platform_data *pf_data;
+
+ pf_data = dev_get_platdata(uart_info->dev);
+
+ if (pf_data->uart.disable_uart) {
+ int err = pf_data->uart.disable_uart(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV,
+ "Unable to disable UART Hardware (%d)\n", err);
+ }
+}
+
+/**
+ * enable_uart_pins() - Enable the UART pins.
+ * @uart_info: Main Uart structure.
+ */
+static void enable_uart_pins(struct uart_info *uart_info)
+{
+ struct cg2900_platform_data *pf_data;
+
+ pf_data = dev_get_platdata(uart_info->dev);
+
+ if (pf_data->uart.enable_uart) {
+ int err = pf_data->uart.enable_uart(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV,
+ "Unable to enable UART Hardware (%d)\n", err);
+ }
+}
+
+/**
+ * unset_cts_irq() - Disable interrupt on CTS.
+ * @uart_info: Main Uart structure.
+ */
+static void unset_cts_irq(struct uart_info *uart_info)
+{
+ /* Free CTS interrupt */
+ free_irq(uart_info->cts_irq, uart_info->dev);
+}
+
+/**
+ * get_sleep_timeout() - Get sleep timeout.
+ * @uart_info: Main Uart structure.
+ *
+ * Check all conditions for sleep and return sleep timeout.
+ * Return:
+ * 0: sleep not allowed.
+ * other: Timeout value in ms.
+ */
+static unsigned long get_sleep_timeout(struct uart_info *uart_info)
+{
+ unsigned long timeout_jiffies = cg2900_get_sleep_timeout();
+
+ if (timeout_jiffies &&
+ uart_info->hu &&
+ uart_info->hu->fd &&
+ uart_info->sleep_allowed)
+ return timeout_jiffies;
+
+ return 0;
+}
+
+/**
+ * work_wake_up_chip() - Called to wake up of the transport in work context.
+ * @work: work which needs to be done.
+ */
+static void work_wake_up_chip(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+
+ wake_up_chip(uart_info);
+}
+
+/**
+ * wake_up_chip() - Wakes up the chip and transport.
+ * @work: pointer to a work struct if the function was called that way.
+ *
+ * Depending on the current sleep state it may wake up the transport.
+ */
+static void wake_up_chip(struct uart_info *uart_info)
+{
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ /* Resuming state is special. Need to get back chip to awake state. */
+ if (!timeout_jiffies && uart_info->sleep_state != CHIP_RESUMING)
+ return;
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ /*
+ * If chip is powered down we cannot wake it up here. It has to be woken
+ * up through a call to uart_set_chip_power()
+ */
+ if (CHIP_POWERED_DOWN == uart_info->sleep_state)
+ goto finished;
+
+ /*
+ * This function indicates data is transmitted.
+ * Therefore see to that the chip is awake.
+ */
+ if (CHIP_AWAKE == uart_info->sleep_state)
+ goto finished;
+
+ if (CHIP_ASLEEP == uart_info->sleep_state ||
+ CHIP_RESUMING == uart_info->sleep_state) {
+ /* Wait before disabling IRQ */
+ schedule_timeout_killable(
+ msecs_to_jiffies(UART_RESUME_TIMEOUT));
+
+ /* Disable IRQ only when it was enabled. */
+ unset_cts_irq(uart_info);
+ (void)hci_uart_set_baudrate(uart_info->hu,
+ uart_info->baud_rate);
+
+ enable_uart_pins(uart_info);
+
+ /*
+ * Wait before flowing on. Otherwise UART might not be ready in
+ * time
+ */
+ schedule_timeout_killable(
+ msecs_to_jiffies(UART_RESUME_TIMEOUT));
+
+ /* Set FLOW on. */
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_ON);
+ }
+
+ /* Unset BREAK. */
+ dev_dbg(MAIN_DEV, "wake_up_chip: Clear break\n");
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_AWAKE\n");
+ uart_info->sleep_state = CHIP_AWAKE;
+
+finished:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+}
+
+/**
+ * set_chip_sleep_mode() - Put the chip and transport to sleep mode.
+ * @work: pointer to work_struct.
+ *
+ * The set_chip_sleep_mode() function is called if there are no ongoing data
+ * transmissions. It tries to put the chip in sleep mode.
+ *
+ */
+static void set_chip_sleep_mode(struct work_struct *work)
+{
+ int err = 0;
+ struct delayed_work *delayed_work =
+ container_of(work, struct delayed_work, work);
+ struct uart_delayed_work_struct *current_work = container_of(
+ delayed_work, struct uart_delayed_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+ int chars_in_buffer;
+
+ if (!timeout_jiffies)
+ return;
+
+ if (uart_info->tx_in_progress || uart_info->rx_in_progress) {
+ dev_dbg(MAIN_DEV, "Not going to sleep, TX/RX in progress\n");
+ return;
+ }
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ switch (uart_info->sleep_state) {
+ case CHIP_FALLING_ASLEEP:
+ if (!is_chip_flow_off(uart_info)) {
+ dev_dbg(MAIN_DEV, "Chip flow is on, it's not ready to"
+ "sleep yet\n");
+ goto schedule_sleep_work;
+ }
+
+ /* Flow OFF. */
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_OFF);
+
+ disable_uart_pins(uart_info);
+
+ /*
+ * Set baud zero.
+ * This cause shut off UART clock as well.
+ */
+ (void)hci_uart_set_baudrate(uart_info->hu,
+ ZERO_BAUD_RATE);
+ err = set_cts_irq(uart_info);
+ if (err < 0) {
+ enable_uart_pins(uart_info);
+ (void)hci_uart_set_baudrate(uart_info->hu,
+ uart_info->baud_rate);
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_ON);
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_AWAKE\n");
+ uart_info->sleep_state = CHIP_AWAKE;
+
+ if (err == -ECANCELED)
+ goto finished;
+ else {
+ dev_err(MAIN_DEV, "Can not set interrupt on "
+ "CTS, err:%d\n", err);
+ goto error;
+ }
+ }
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_ASLEEP\n");
+ uart_info->sleep_state = CHIP_ASLEEP;
+ break;
+ case CHIP_AWAKE:
+ chars_in_buffer = hci_uart_chars_in_buffer(uart_info->hu);
+ if (chars_in_buffer) {
+ dev_dbg(MAIN_DEV, "sleep_timer_expired: "
+ "tx not finished, stay awake and "
+ "restart the sleep timer\n");
+ goto schedule_sleep_work;
+ }
+
+ dev_dbg(MAIN_DEV, "sleep_timer_expired: Set break\n");
+ hci_uart_set_break(uart_info->hu, BREAK_ON);
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_FALLING_ASLEEP\n");
+ uart_info->sleep_state = CHIP_FALLING_ASLEEP;
+ goto schedule_sleep_work;
+
+ case CHIP_POWERED_DOWN:
+ case CHIP_SUSPENDED:
+ case CHIP_ASLEEP: /* Fallthrough. */
+ default:
+ dev_dbg(MAIN_DEV,
+ "Chip sleeps, is suspended or powered down\n");
+ break;
+ }
+
+ mutex_unlock(&(uart_info->sleep_state_lock));
+
+ return;
+
+finished:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ return;
+schedule_sleep_work:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ if (timeout_jiffies)
+ queue_delayed_work(uart_info->wq, &uart_info->sleep_work.work,
+ timeout_jiffies);
+ return;
+error:
+ /* Disable sleep mode.*/
+ dev_err(MAIN_DEV, "Disable sleep mode\n");
+ uart_info->sleep_allowed = false;
+ mutex_unlock(&(uart_info->sleep_state_lock));
+}
+
+#ifdef CONFIG_PM
+/**
+ * cg2900_uart_suspend() - Called by Linux PM to put the device in a low power mode.
+ * @pdev: Pointer to platform device.
+ * @state: New state.
+ *
+ * In UART case, CG2900 driver does nothing on suspend.
+ *
+ * Returns:
+ * 0 - Success.
+ */
+static int cg2900_uart_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int err = 0;
+ struct uart_info *uart_info = dev_get_drvdata(&pdev->dev);
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ if (uart_info->sleep_state == CHIP_POWERED_DOWN)
+ goto finished;
+
+ if (uart_info->sleep_state != CHIP_ASLEEP) {
+ err = -EBUSY;
+ goto finished;
+ }
+
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_SUSPENDED\n");
+ uart_info->sleep_state = CHIP_SUSPENDED;
+
+finished:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ return err;
+}
+
+/**
+ * cg2900_uart_resume() - Called to bring a device back from a low power state.
+ * @pdev: Pointer to platform device.
+ *
+ * In UART case, CG2900 driver does nothing on resume.
+ *
+ * Returns:
+ * 0 - Success.
+ */
+static int cg2900_uart_resume(struct platform_device *pdev)
+{
+ struct uart_info *uart_info = dev_get_drvdata(&pdev->dev);
+
+ mutex_lock(&(uart_info->sleep_state_lock));
+
+ if (uart_info->sleep_state == CHIP_RESUMING)
+ /* System resume because of trafic on UART. Lets wakeup.*/
+ (void)queue_work(uart_info->wq, &uart_info->wakeup_work.work);
+ else if (uart_info->sleep_state != CHIP_POWERED_DOWN) {
+ /* No need to wakeup chip. Go back to Asleep state.*/
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_ASLEEP\n");
+ uart_info->sleep_state = CHIP_ASLEEP;
+ }
+
+ mutex_unlock(&(uart_info->sleep_state_lock));
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * cg2900_enable_regulator() - Enable regulator.
+ * @uart_info: Main Uart structure.
+ *
+ * Returns:
+ * 0 - Success.
+ * Error from regulator_get, regulator_enable.
+ */
+static int cg2900_enable_regulator(struct uart_info *uart_info)
+{
+#ifdef CONFIG_REGULATOR
+ int err;
+
+ /* Get and enable regulator. */
+ uart_info->regulator = regulator_get(uart_info->dev, "gbf_1v8");
+ if (IS_ERR(uart_info->regulator)) {
+ dev_err(MAIN_DEV, "Not able to find regulator\n");
+ err = PTR_ERR(uart_info->regulator);
+ } else {
+ err = regulator_enable(uart_info->regulator);
+ if (err)
+ dev_err(MAIN_DEV, "Not able to enable regulator\n");
+ else
+ uart_info->regulator_enabled = true;
+ }
+ return err;
+#else
+ return 0;
+#endif
+}
+
+/**
+ * cg2900_disable_regulator() - Disable regulator.
+ * @uart_info: Main Uart structure.
+ *
+ */
+static void cg2900_disable_regulator(struct uart_info *uart_info)
+{
+#ifdef CONFIG_REGULATOR
+ /* Disable and put regulator. */
+ if (uart_info->regulator && uart_info->regulator_enabled) {
+ regulator_disable(uart_info->regulator);
+ uart_info->regulator_enabled = false;
+ }
+ regulator_put(uart_info->regulator);
+ uart_info->regulator = NULL;
+#endif
+}
+
+/**
+ * is_set_baud_rate_cmd() - Checks if data contains set baud rate hci cmd.
+ * @data: Pointer to data array to check.
+ *
+ * Returns:
+ * true - if cmd found;
+ * false - otherwise.
+ */
+static bool is_set_baud_rate_cmd(const char *data)
+{
+ struct hci_command_hdr *cmd;
+
+ if (data[0] != HCI_BT_CMD_H4_CHANNEL)
+ return false;
+
+ cmd = (struct hci_command_hdr *)&data[1];
+ if (le16_to_cpu(cmd->opcode) == CG2900_BT_OP_VS_SET_BAUD_RATE &&
+ cmd->plen == BT_PARAM_LEN(sizeof(struct bt_vs_set_baud_rate_cmd)))
+ return true;
+
+ return false;
+}
+
+/**
+ * is_bt_cmd_complete_no_param() - Checks if data contains command complete event for a certain command.
+ * @skb: sk_buffer containing the data including H:4 header.
+ * @opcode: Command op code.
+ * @status: Command status.
+ *
+ * Returns:
+ * true - If this is the command complete we were looking for;
+ * false - otherwise.
+ */
+static bool is_bt_cmd_complete_no_param(struct sk_buff *skb, u16 opcode,
+ u8 *status)
+{
+ struct hci_event_hdr *event;
+ struct hci_ev_cmd_complete *complete;
+ u8 *data = &(skb->data[0]);
+
+ if (HCI_BT_EVT_H4_CHANNEL != *data)
+ return false;
+
+ data += HCI_H4_SIZE;
+ event = (struct hci_event_hdr *)data;
+ if (HCI_EV_CMD_COMPLETE != event->evt ||
+ HCI_BT_CMD_COMPLETE_LEN != event->plen)
+ return false;
+
+ data += sizeof(*event);
+ complete = (struct hci_ev_cmd_complete *)data;
+ if (opcode != le16_to_cpu(complete->opcode))
+ return false;
+
+ if (status) {
+ /*
+ * All command complete have the status field at first byte of
+ * packet data.
+ */
+ data += sizeof(*complete);
+ *status = *data;
+ }
+ return true;
+}
+
+/**
+ * alloc_rx_skb() - Alloc an sk_buff structure for receiving data from controller.
+ * @size: Size in number of octets.
+ * @priority: Allocation priority, e.g. GFP_KERNEL.
+ *
+ * Returns:
+ * Pointer to sk_buff structure.
+ */
+static struct sk_buff *alloc_rx_skb(unsigned int size, gfp_t priority)
+{
+ struct sk_buff *skb;
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(size + RX_SKB_RESERVE, priority);
+ if (skb)
+ skb_reserve(skb, RX_SKB_RESERVE);
+
+ return skb;
+}
+
+/**
+ * finish_setting_baud_rate() - Handles sending the ste baud rate hci cmd.
+ * @hu: Pointer to associated Hci uart structure.
+ *
+ * finish_setting_baud_rate() makes sure that the set baud rate cmd has
+ * been really sent out on the wire and then switches the tty driver to new
+ * baud rate.
+ */
+static void finish_setting_baud_rate(struct hci_uart *hu)
+{
+ struct uart_info *uart_info =
+ (struct uart_info *)dev_get_drvdata(hu->proto->dev);
+ /*
+ * Give the tty driver time to send data and proceed. If it hasn't
+ * been sent we can't do much about it anyway.
+ */
+ schedule_timeout_killable(msecs_to_jiffies(UART_TX_TIMEOUT));
+
+ /*
+ * Now set the termios struct to the new baudrate. Start by storing
+ * the old termios.
+ */
+ if (hci_uart_set_baudrate(hu, uart_info->baud_rate) < 0) {
+ /* Something went wrong.*/
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ } else {
+ dev_dbg(MAIN_DEV, "Setting termios to new baud rate\n");
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_WAITING\n");
+ uart_info->baud_rate_state = BAUD_WAITING;
+ }
+
+ hci_uart_flow_ctrl(hu, FLOW_ON);
+}
+
+/**
+ * alloc_set_baud_rate_cmd() - Allocates new sk_buff and fills in the change baud rate hci cmd.
+ * @uart_info: Main Uart structure.
+ * @baud: (in/out) Requested new baud rate. Updated to default baud rate
+ * upon invalid value.
+ *
+ * Returns:
+ * Pointer to allocated sk_buff if successful;
+ * NULL otherwise.
+ */
+static struct sk_buff *alloc_set_baud_rate_cmd(struct uart_info *uart_info,
+ int *baud)
+{
+ struct sk_buff *skb;
+ u8 *h4;
+ struct bt_vs_set_baud_rate_cmd *cmd;
+
+ skb = alloc_skb(sizeof(*cmd) + CG2900_SKB_RESERVE, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(MAIN_DEV,
+ "alloc_set_baud_rate_cmd: Failed to alloc skb\n");
+ return NULL;
+ }
+ skb_reserve(skb, CG2900_SKB_RESERVE);
+
+ cmd = (struct bt_vs_set_baud_rate_cmd *)skb_put(skb, sizeof(cmd));
+
+ /* Create the Hci_Cmd_ST_Set_Uart_Baud_Rate packet */
+ cmd->opcode = cpu_to_le16(CG2900_BT_OP_VS_SET_BAUD_RATE);
+ cmd->plen = BT_PARAM_LEN(sizeof(cmd));
+
+ switch (*baud) {
+ case 57600:
+ cmd->baud_rate = CG2900_BAUD_RATE_57600;
+ break;
+ case 115200:
+ cmd->baud_rate = CG2900_BAUD_RATE_115200;
+ break;
+ case 230400:
+ cmd->baud_rate = CG2900_BAUD_RATE_230400;
+ break;
+ case 460800:
+ cmd->baud_rate = CG2900_BAUD_RATE_460800;
+ break;
+ case 921600:
+ cmd->baud_rate = CG2900_BAUD_RATE_921600;
+ break;
+ case 2000000:
+ cmd->baud_rate = CG2900_BAUD_RATE_2000000;
+ break;
+ case 3000000:
+ cmd->baud_rate = CG2900_BAUD_RATE_3000000;
+ break;
+ case 4000000:
+ cmd->baud_rate = CG2900_BAUD_RATE_4000000;
+ break;
+ default:
+ dev_err(MAIN_DEV,
+ "Invalid speed requested (%d), using 115200 bps "
+ "instead\n", *baud);
+ cmd->baud_rate = CG2900_BAUD_RATE_115200;
+ *baud = 115200;
+ break;
+ };
+
+ h4 = skb_push(skb, HCI_H4_SIZE);
+ *h4 = HCI_BT_CMD_H4_CHANNEL;
+
+ return skb;
+}
+
+/**
+ * work_do_transmit() - Transmit data packet to connectivity controller over UART.
+ * @work: Pointer to work info structure. Contains uart_info structure
+ * pointer.
+ */
+static void work_do_transmit(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+
+ kfree(current_work);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /* Mark that there is an ongoing transfer. */
+ uart_info->tx_in_progress = true;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ /* Wake up the chip and transport. */
+ wake_up_chip(uart_info);
+
+ (void)hci_uart_tx_wakeup(uart_info->hu);
+}
+
+/**
+ * work_hw_deregistered() - Handle HW deregistered.
+ * @work: Reference to work data.
+ */
+static void work_hw_deregistered(struct work_struct *work)
+{
+ struct uart_work_struct *current_work;
+ struct uart_info *uart_info;
+ int err;
+ current_work = container_of(work, struct uart_work_struct, work);
+ uart_info = (struct uart_info *)current_work->data;
+
+ err = cg2900_deregister_trans_driver(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV, "Could not deregister UART from Core (%d)\n",
+ err);
+
+ kfree(current_work);
+}
+
+/**
+ * set_baud_rate() - Sets new baud rate for the UART.
+ * @hu: Pointer to hci_uart structure.
+ * @baud: New baud rate.
+ *
+ * This function first sends the HCI command
+ * Hci_Cmd_ST_Set_Uart_Baud_Rate. It then changes the baud rate in HW, and
+ * finally it waits for the Command Complete event for the
+ * Hci_Cmd_ST_Set_Uart_Baud_Rate command.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EALREADY if baud rate change is already in progress.
+ * -EFAULT if one or more of the UART related structs is not allocated.
+ * -ENOMEM if skb allocation has failed.
+ * -EPERM if setting the new baud rate has failed.
+ * Errors from create_work_item.
+ */
+static int set_baud_rate(struct hci_uart *hu, int baud)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ int old_baud_rate;
+ struct uart_info *uart_info =
+ (struct uart_info *)dev_get_drvdata(hu->proto->dev);
+
+ dev_dbg(MAIN_DEV, "set_baud_rate (%d baud)\n", baud);
+
+ if (uart_info->baud_rate_state != BAUD_IDLE) {
+ dev_err(MAIN_DEV,
+ "Trying to set new baud rate before old setting "
+ "is finished\n");
+ return -EALREADY;
+ }
+
+ /*
+ * Wait some time to be sure that any RX process has finished (which
+ * flows on RTS in the end) before flowing off the RTS.
+ */
+ schedule_timeout_killable(msecs_to_jiffies(UART_RX_TIMEOUT));
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_OFF);
+
+ /*
+ * Store old baud rate so that we can restore it if something goes
+ * wrong.
+ */
+ old_baud_rate = uart_info->baud_rate;
+
+ skb = alloc_set_baud_rate_cmd(uart_info, &baud);
+ if (!skb) {
+ dev_err(MAIN_DEV, "alloc_set_baud_rate_cmd failed\n");
+ return -ENOMEM;
+ }
+
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_START\n");
+ uart_info->baud_rate_state = BAUD_START;
+ uart_info->baud_rate = baud;
+
+ /* Queue the sk_buffer... */
+ skb_queue_tail(&uart_info->tx_queue, skb);
+
+ /* ... and call the common UART TX function */
+ err = create_work_item(uart_info, work_do_transmit);
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Failed to send change baud rate cmd, freeing skb\n");
+ skb = skb_dequeue_tail(&uart_info->tx_queue);
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ uart_info->baud_rate = old_baud_rate;
+ kfree_skb(skb);
+ return err;
+ }
+
+ dev_dbg(MAIN_DEV, "Set baud rate cmd scheduled for sending\n");
+
+ /*
+ * Now wait for the command complete.
+ * It will come at the new baudrate.
+ */
+ wait_event_timeout(uart_wait_queue,
+ ((BAUD_SUCCESS == uart_info->baud_rate_state) ||
+ (BAUD_FAIL == uart_info->baud_rate_state)),
+ msecs_to_jiffies(UART_RESP_TIMEOUT));
+ if (BAUD_SUCCESS == uart_info->baud_rate_state)
+ dev_info(MAIN_DEV, "Baud rate changed to %d baud\n", baud);
+ else {
+ dev_err(MAIN_DEV, "Failed to set new baud rate (%d)\n",
+ uart_info->baud_rate_state);
+ err = -EPERM;
+ }
+
+ /* Finally flush the TTY so we are sure that is no bad data there */
+ hci_uart_flush_buffer(hu);
+ dev_dbg(MAIN_DEV, "Flushing TTY after baud rate change\n");
+ /* Finished. Set state to IDLE */
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+
+ return err;
+}
+
+/**
+ * uart_write() - Transmit data to CG2900 over UART.
+ * @dev: Transport device information.
+ * @skb: SK buffer to transmit.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Errors from create_work_item.
+ */
+static int uart_write(struct cg2900_chip_dev *dev, struct sk_buff *skb)
+{
+ int err;
+ struct uart_info *uart_info = dev_get_drvdata(dev->dev);
+
+ if (uart_debug)
+ dev_dbg(MAIN_DEV, "uart_write: data len = %d\n", skb->len);
+
+ /* Queue the sk_buffer... */
+ skb_queue_tail(&uart_info->tx_queue, skb);
+
+ /* ...and start TX operation */
+
+ err = create_work_item(uart_info, work_do_transmit);
+ if (err)
+ dev_err(MAIN_DEV,
+ "Failed to create work item (%d) uart_tty_wakeup\n",
+ err);
+
+ return err;
+}
+
+/**
+ * uart_open() - Open the CG2900 UART for data transfers.
+ * @dev: Transport device information.
+ *
+ * Returns:
+ * 0 if there is no error,
+ * -EACCES if write to transport failed,
+ * -EIO if chip did not answer to commands.
+ * Errors from set_baud_rate.
+ */
+static int uart_open(struct cg2900_chip_dev *dev)
+{
+ u8 *h4;
+ struct sk_buff *skb;
+ struct hci_command_hdr *cmd;
+ struct uart_info *uart_info = dev_get_drvdata(dev->dev);
+
+ /*
+ * Chip has just been started up. It has a system to autodetect
+ * exact baud rate and transport to use. There are only a few commands
+ * it will recognize and HCI Reset is one of them.
+ * We therefore start with sending that before actually changing
+ * baud rate.
+ *
+ * Create the Hci_Reset packet
+ */
+
+ skb = alloc_skb(sizeof(*cmd) + HCI_H4_SIZE, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(MAIN_DEV, "Couldn't allocate sk_buff with length %d\n",
+ sizeof(*cmd));
+ return -EACCES;
+ }
+ skb_reserve(skb, HCI_H4_SIZE);
+ cmd = (struct hci_command_hdr *)skb_put(skb, sizeof(*cmd));
+ cmd->opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd->plen = 0; /* No parameters for HCI reset */
+
+ h4 = skb_push(skb, HCI_H4_SIZE);
+ *h4 = HCI_BT_CMD_H4_CHANNEL;
+
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_SENDING_RESET\n");
+ uart_info->baud_rate_state = BAUD_SENDING_RESET;
+ dev_dbg(MAIN_DEV, "Sending HCI reset before baud rate change\n");
+
+
+ /* Queue the sk_buffer... */
+ skb_queue_tail(&uart_info->tx_queue, skb);
+
+ (void)hci_uart_tx_wakeup(uart_info->hu);
+
+ /*
+ * Wait for command complete. If error, exit without changing
+ * baud rate.
+ */
+ wait_event_timeout(uart_wait_queue,
+ BAUD_IDLE == uart_info->baud_rate_state,
+ msecs_to_jiffies(UART_RESP_TIMEOUT));
+ if (BAUD_IDLE != uart_info->baud_rate_state) {
+ dev_err(MAIN_DEV, "Failed to send HCI Reset\n");
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ return -EIO;
+ }
+
+ /* Just return if there will be no change of baud rate */
+ if (uart_default_baud != uart_high_baud)
+ return set_baud_rate(uart_info->hu, uart_high_baud);
+ else
+ return 0;
+}
+
+/**
+ * uart_set_chip_power() - Enable or disable the CG2900.
+ * @chip_on: true if chip shall be enabled, false otherwise.
+ */
+static void uart_set_chip_power(struct cg2900_chip_dev *dev, bool chip_on)
+{
+ int uart_baudrate = uart_default_baud;
+ struct cg2900_platform_data *pf_data;
+ struct uart_info *uart_info;
+
+ pf_data = dev_get_platdata(dev->dev);
+ uart_info = dev_get_drvdata(dev->dev);
+
+ dev_info(MAIN_DEV, "Set chip power: %s\n",
+ (chip_on ? "ENABLE" : "DISABLE"));
+
+ /* Cancel any ongoing works.*/
+ cancel_work_sync(&uart_info->wakeup_work.work);
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ mutex_lock(&uart_info->sleep_state_lock);
+
+ if (!uart_info->hu) {
+ dev_err(MAIN_DEV, "Hci uart struct is not allocated\n");
+ goto unlock;
+ }
+
+ if (chip_on) {
+ if (uart_info->sleep_state != CHIP_POWERED_DOWN) {
+ dev_err(MAIN_DEV, "Chip is already powered up (%d)\n",
+ uart_info->sleep_state);
+ goto unlock;
+ }
+
+ if (cg2900_enable_regulator(uart_info))
+ goto unlock;
+
+ if (pf_data->enable_chip) {
+ pf_data->enable_chip(dev);
+ dev_dbg(MAIN_DEV, "New sleep_state: CHIP_AWAKE\n");
+ uart_info->sleep_state = CHIP_AWAKE;
+ }
+
+ (void)hci_uart_set_baudrate(uart_info->hu, uart_baudrate);
+
+ hci_uart_flow_ctrl(uart_info->hu, FLOW_ON);
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+ } else {
+ /* Turn off the chip.*/
+ switch (uart_info->sleep_state) {
+ case CHIP_AWAKE:
+ break;
+ case CHIP_FALLING_ASLEEP:
+ hci_uart_set_break(uart_info->hu, BREAK_OFF);
+ break;
+ case CHIP_SUSPENDED:
+ case CHIP_ASLEEP:
+ unset_cts_irq(uart_info);
+ enable_uart_pins(uart_info);
+ break;
+ default:
+ break;
+ }
+
+ if (pf_data->disable_chip) {
+ pf_data->disable_chip(dev);
+ dev_dbg(MAIN_DEV,
+ "New sleep_state: CHIP_POWERED_DOWN\n");
+ uart_info->sleep_state = CHIP_POWERED_DOWN;
+ }
+ cg2900_disable_regulator(uart_info);
+ /*
+ * Setting baud rate to 0 will tell UART driver to shut off its
+ * clocks.
+ */
+ (void)hci_uart_set_baudrate(uart_info->hu, ZERO_BAUD_RATE);
+ }
+
+unlock:
+ mutex_unlock(&(uart_info->sleep_state_lock));
+}
+
+/**
+ * uart_chip_startup_finished() - CG2900 startup finished.
+ * @dev: Transport device information.
+ */
+static void uart_chip_startup_finished(struct cg2900_chip_dev *dev)
+{
+ struct uart_info *uart_info = dev_get_drvdata(dev->dev);
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ /* Schedule work to put the chip and transport to sleep. */
+ if (timeout_jiffies)
+ queue_delayed_work(uart_info->wq, &uart_info->sleep_work.work,
+ timeout_jiffies);
+}
+/**
+ * uart_close() - Close the CG2900 UART for data transfers.
+ * @dev: Transport device information.
+ *
+ * Returns:
+ * 0 if there is no error.
+ */
+static int uart_close(struct cg2900_chip_dev *dev)
+{
+ /* The chip is already shut down. Power off the chip. */
+ uart_set_chip_power(dev, false);
+ return 0;
+}
+
+/**
+ * send_skb_to_core() - Sends packet received from UART to CG2900 Core.
+ * @skb: Received data packet.
+ *
+ * This function checks if UART is waiting for Command complete event,
+ * see set_baud_rate.
+ * If it is waiting it checks if it is the expected packet and the status.
+ * If not is passes the packet to CG2900 Core.
+ */
+static void send_skb_to_core(struct uart_info *uart_info, struct sk_buff *skb)
+{
+ u8 status;
+
+ if (!skb) {
+ dev_err(MAIN_DEV, "send_skb_to_core: Received NULL as skb\n");
+ return;
+ }
+
+ if (BAUD_WAITING == uart_info->baud_rate_state) {
+ /*
+ * Should only really be one packet received now:
+ * the CmdComplete for the SetBaudrate command
+ * Let's see if this is the packet we are waiting for.
+ */
+ if (!is_bt_cmd_complete_no_param(skb,
+ CG2900_BT_OP_VS_SET_BAUD_RATE, &status)) {
+ /*
+ * Received other event. Should not really happen,
+ * but pass the data to CG2900 Core anyway.
+ */
+ dev_dbg(MAIN_DEV, "Sending packet to CG2900 Core while "
+ "waiting for BaudRate CmdComplete\n");
+ uart_info->chip_dev.c_cb.data_from_chip
+ (&uart_info->chip_dev, skb);
+ return;
+ }
+
+ /*
+ * We have received complete event for our baud rate
+ * change command
+ */
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ dev_dbg(MAIN_DEV, "Received baud rate change complete "
+ "event OK\n");
+ dev_dbg(MAIN_DEV,
+ "New baud_rate_state: BAUD_SUCCESS\n");
+ uart_info->baud_rate_state = BAUD_SUCCESS;
+ } else {
+ dev_err(MAIN_DEV,
+ "Received baud rate change complete event "
+ "with status 0x%X\n", status);
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_FAIL\n");
+ uart_info->baud_rate_state = BAUD_FAIL;
+ }
+ wake_up_all(&uart_wait_queue);
+ kfree_skb(skb);
+ } else if (BAUD_SENDING_RESET == uart_info->baud_rate_state) {
+ /*
+ * Should only really be one packet received now:
+ * the CmdComplete for the Reset command
+ * Let's see if this is the packet we are waiting for.
+ */
+ if (!is_bt_cmd_complete_no_param(skb, HCI_OP_RESET, &status)) {
+ /*
+ * Received other event. Should not really happen,
+ * but pass the data to CG2900 Core anyway.
+ */
+ dev_dbg(MAIN_DEV, "Sending packet to CG2900 Core while "
+ "waiting for Reset CmdComplete\n");
+ uart_info->chip_dev.c_cb.data_from_chip
+ (&uart_info->chip_dev, skb);
+ return;
+ }
+
+ /*
+ * We have received complete event for our baud rate
+ * change command
+ */
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ dev_dbg(MAIN_DEV,
+ "Received HCI reset complete event OK\n");
+ /*
+ * Go back to BAUD_IDLE since this was not really
+ * baud rate change but just a preparation of the chip
+ * to be ready to receive commands.
+ */
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_IDLE\n");
+ uart_info->baud_rate_state = BAUD_IDLE;
+ } else {
+ dev_err(MAIN_DEV,
+ "Received HCI reset complete event with "
+ "status 0x%X", status);
+ dev_dbg(MAIN_DEV, "New baud_rate_state: BAUD_FAIL\n");
+ uart_info->baud_rate_state = BAUD_FAIL;
+ }
+ wake_up_all(&uart_wait_queue);
+ kfree_skb(skb);
+ } else {
+ /* Just pass data to CG2900 Core */
+ uart_info->chip_dev.c_cb.data_from_chip
+ (&uart_info->chip_dev, skb);
+ }
+}
+
+/**
+ * check_data_len() - Check number of bytes to receive.
+ * @len: Number of bytes left to receive.
+ */
+static void check_data_len(struct uart_info *uart_info, int len)
+{
+ /* First get number of bytes left in the sk_buffer */
+ register int room = skb_tailroom(uart_info->rx_skb);
+
+ if (!len) {
+ /* No data left to receive. Transmit to CG2900 Core */
+ send_skb_to_core(uart_info, uart_info->rx_skb);
+ } else if (len > room) {
+ dev_err(MAIN_DEV, "Data length is too large (%d > %d)\n",
+ len, room);
+ kfree_skb(uart_info->rx_skb);
+ } else {
+ /*
+ * "Normal" case. Switch to data receiving state and store
+ * data length.
+ */
+ uart_info->rx_state = W4_DATA;
+ uart_info->rx_count = len;
+ return;
+ }
+
+ uart_info->rx_state = W4_PACKET_TYPE;
+ uart_info->rx_skb = NULL;
+ uart_info->rx_count = 0;
+}
+
+/**
+ * work_restart_sleep() - Cancel pending sleep_work, wake-up driver and
+ * schedule new sleep_work in a work context.
+ * @work: work which needs to be done.
+ */
+static void work_restart_sleep(struct work_struct *work)
+{
+ struct uart_work_struct *current_work =
+ container_of(work, struct uart_work_struct, work);
+ struct uart_info *uart_info = (struct uart_info *)current_work->data;
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ uart_info->rx_in_progress = false;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work_sync(&uart_info->sleep_work.work);
+
+ wake_up_chip(uart_info);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /*
+ * If there are no ongoing transfers schedule the sleep work.
+ */
+ if (!(uart_info->tx_in_progress) && timeout_jiffies)
+ queue_delayed_work(uart_info->wq,
+ &uart_info->sleep_work.work,
+ timeout_jiffies);
+ spin_unlock_bh(&(uart_info->transmission_lock));
+}
+
+/**
+ * cg2900_hu_receive() - Handles received UART data.
+ * @data: Data received
+ * @count: Number of bytes received
+ *
+ * The cg2900_hu_receive() function handles received UART data and puts it
+ * together to one complete packet.
+ *
+ * Returns:
+ * Number of bytes not handled, i.e. 0 = no error.
+ */
+static int cg2900_hu_receive(struct hci_uart *hu,
+ void *data, int count)
+{
+ const u8 *r_ptr;
+ u8 *w_ptr;
+ int len;
+ struct hci_event_hdr *evt;
+ struct hci_acl_hdr *acl;
+ union fm_leg_evt_or_irq *fm;
+ struct gnss_hci_hdr *gnss;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+ u8 *tmp;
+
+ r_ptr = (const u8 *)data;
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ /* Mark that there is an ongoing transfer. */
+ uart_info->rx_in_progress = true;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ /* Cancel pending sleep work if there is any. */
+ cancel_delayed_work(&uart_info->sleep_work.work);
+
+ if (uart_debug)
+ print_hex_dump_bytes(NAME " RX:\t", DUMP_PREFIX_NONE,
+ data, count);
+
+ /* Continue while there is data left to handle */
+ while (count) {
+ /*
+ * If we have already received a packet we know how many bytes
+ * there are left.
+ */
+ if (!uart_info->rx_count)
+ goto check_h4_header;
+
+ /* First copy received data into the skb_rx */
+ len = min_t(unsigned int, uart_info->rx_count, count);
+ memcpy(skb_put(uart_info->rx_skb, len), r_ptr, len);
+ /* Update counters from the length and step the data pointer */
+ uart_info->rx_count -= len;
+ count -= len;
+ r_ptr += len;
+
+ if (uart_info->rx_count)
+ /*
+ * More data to receive to current packet. Break and
+ * wait for next data on the UART.
+ */
+ break;
+
+ /* Handle the different states */
+ tmp = uart_info->rx_skb->data + CG2900_SKB_RESERVE;
+ switch (uart_info->rx_state) {
+ case W4_DATA:
+ /*
+ * Whole data packet has been received.
+ * Transmit it to CG2900 Core.
+ */
+ send_skb_to_core(uart_info, uart_info->rx_skb);
+
+ uart_info->rx_state = W4_PACKET_TYPE;
+ uart_info->rx_skb = NULL;
+ continue;
+
+ case W4_EVENT_HDR:
+ evt = (struct hci_event_hdr *)tmp;
+ check_data_len(uart_info, evt->plen);
+ /* Header read. Continue with next bytes */
+ continue;
+
+ case W4_ACL_HDR:
+ acl = (struct hci_acl_hdr *)tmp;
+ check_data_len(uart_info, le16_to_cpu(acl->dlen));
+ /* Header read. Continue with next bytes */
+ continue;
+
+ case W4_FM_RADIO_HDR:
+ fm = (union fm_leg_evt_or_irq *)tmp;
+ check_data_len(uart_info, fm->param_length);
+ /* Header read. Continue with next bytes */
+ continue;
+
+ case W4_GNSS_HDR:
+ gnss = (struct gnss_hci_hdr *)tmp;
+ check_data_len(uart_info, le16_to_cpu(gnss->plen));
+ /* Header read. Continue with next bytes */
+ continue;
+
+ default:
+ dev_err(MAIN_DEV,
+ "Bad state indicating memory overwrite "
+ "(0x%X)\n", (u8)(uart_info->rx_state));
+ break;
+ }
+
+check_h4_header:
+ /* Check which H:4 packet this is and update RX states */
+ if (*r_ptr == HCI_BT_EVT_H4_CHANNEL) {
+ uart_info->rx_state = W4_EVENT_HDR;
+ uart_info->rx_count = HCI_BT_EVT_HDR_SIZE;
+ } else if (*r_ptr == HCI_BT_ACL_H4_CHANNEL) {
+ uart_info->rx_state = W4_ACL_HDR;
+ uart_info->rx_count = HCI_BT_ACL_HDR_SIZE;
+ } else if (*r_ptr == HCI_FM_RADIO_H4_CHANNEL) {
+ uart_info->rx_state = W4_FM_RADIO_HDR;
+ uart_info->rx_count = HCI_FM_RADIO_HDR_SIZE;
+ } else if (*r_ptr == HCI_GNSS_H4_CHANNEL) {
+ uart_info->rx_state = W4_GNSS_HDR;
+ uart_info->rx_count = HCI_GNSS_HDR_SIZE;
+ } else {
+ dev_err(MAIN_DEV, "Unknown HCI packet type 0x%X\n",
+ (u8)*r_ptr);
+ r_ptr++;
+ count--;
+ continue;
+ }
+
+ /*
+ * Allocate packet. We do not yet know the size and therefore
+ * allocate max size.
+ */
+ uart_info->rx_skb = alloc_rx_skb(RX_SKB_MAX_SIZE, GFP_ATOMIC);
+ if (!uart_info->rx_skb) {
+ dev_err(MAIN_DEV,
+ "Can't allocate memory for new packet\n");
+ uart_info->rx_state = W4_PACKET_TYPE;
+ uart_info->rx_count = 0;
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+ uart_info->rx_in_progress = false;
+ spin_unlock_bh(&(uart_info->transmission_lock));
+ return 0;
+ }
+
+ /* Write the H:4 header first in the sk_buffer */
+ w_ptr = skb_put(uart_info->rx_skb, 1);
+ *w_ptr = *r_ptr;
+
+ /* First byte (H4 header) read. Goto next byte */
+ r_ptr++;
+ count--;
+ }
+
+ (void)queue_work(uart_info->wq, &uart_info->restart_sleep_work.work);
+
+ return count;
+}
+
+/**
+ * cg2900_hu_open() - Called when UART line discipline changed to N_HCI.
+ * @hu: Pointer to associated Hci uart structure.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Errors from cg2900_register_trans_driver.
+ */
+static int cg2900_hu_open(struct hci_uart *hu)
+{
+ int err;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+
+ if (!uart_info)
+ return -EACCES;
+
+ dev_info(MAIN_DEV, "UART opened\n");
+
+ skb_queue_head_init(&uart_info->tx_queue);
+
+ uart_info->hu = hu;
+
+ /* Tell CG2900 Core that UART is connected */
+ err = cg2900_register_trans_driver(&uart_info->chip_dev);
+ if (err)
+ dev_err(MAIN_DEV, "Could not register transport driver (%d)\n",
+ err);
+
+ if (hu->tty->ops->tiocmget && hu->tty->ops->break_ctl)
+ uart_info->sleep_allowed = true;
+ else {
+ dev_err(MAIN_DEV, "Sleep mode not available\n");
+ uart_info->sleep_allowed = false;
+ }
+
+ return err;
+
+}
+
+/**
+ * cg2900_hu_close() - Close UART tty.
+ * @hu: Pointer to associated hci_uart structure.
+ *
+ * The uart_tty_close() function is called when the line discipline is changed
+ * to something else, the TTY is closed, or the TTY detects a hangup.
+ */
+static int cg2900_hu_close(struct hci_uart *hu)
+{
+ int err;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+
+
+ BUG_ON(!uart_info);
+ BUG_ON(!uart_info->wq);
+
+ /* Purge any stored sk_buffers */
+ skb_queue_purge(&uart_info->tx_queue);
+ if (uart_info->rx_skb) {
+ kfree_skb(uart_info->rx_skb);
+ uart_info->rx_skb = NULL;
+ }
+
+ dev_info(MAIN_DEV, "UART closed\n");
+ err = create_work_item(uart_info, work_hw_deregistered);
+ if (err)
+ dev_err(MAIN_DEV, "Failed to create work item (%d) "
+ "work_hw_deregistered\n", err);
+
+ uart_info->hu = NULL;
+
+ return 0;
+}
+
+/**
+ * cg2900_hu_dequeue() - Get new skbuff.
+ * @hu: Pointer to associated hci_uart structure.
+ *
+ * The uart_tty_close() function is called when the line discipline is changed
+ * to something else, the TTY is closed, or the TTY detects a hangup.
+ */
+static struct sk_buff *cg2900_hu_dequeue(struct hci_uart *hu)
+{
+ struct sk_buff *skb;
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+ unsigned long timeout_jiffies = get_sleep_timeout(uart_info);
+
+ spin_lock_bh(&(uart_info->transmission_lock));
+
+ skb = skb_dequeue(&uart_info->tx_queue);
+
+ if (!skb)
+ uart_info->tx_in_progress = false;
+
+ /*
+ * If there are no ongoing transfers schedule the sleep work.
+ */
+ if (!(uart_info->rx_in_progress) && timeout_jiffies && !skb)
+ queue_delayed_work(uart_info->wq,
+ &uart_info->sleep_work.work,
+ timeout_jiffies);
+
+ spin_unlock_bh(&(uart_info->transmission_lock));
+
+ if (BAUD_SENDING == uart_info->baud_rate_state && !skb)
+ finish_setting_baud_rate(hu);
+ /*
+ * If it's set baud rate cmd set correct baud state and after
+ * sending is finished inform the tty driver about the new
+ * baud rate.
+ */
+ if ((BAUD_START == uart_info->baud_rate_state) &&
+ skb && (is_set_baud_rate_cmd(skb->data))) {
+ dev_dbg(MAIN_DEV, "UART set baud rate cmd found\n");
+ uart_info->baud_rate_state = BAUD_SENDING;
+ }
+
+ if (uart_debug && skb)
+ print_hex_dump_bytes(NAME " TX:\t", DUMP_PREFIX_NONE,
+ skb->data, skb->len);
+
+ return skb;
+}
+
+/**
+ * cg2900_hu_flush() - Flush buffers.
+ * @hu: Pointer to associated hci_uart structure.
+ *
+ */
+static int cg2900_hu_flush(struct hci_uart *hu)
+{
+ struct uart_info *uart_info = dev_get_drvdata(hu->proto->dev);
+
+ dev_dbg(MAIN_DEV, "ui %p", uart_info);
+ skb_queue_purge(&uart_info->tx_queue);
+ return 0;
+}
+
+/**
+ * cg2900_uart_probe() - Initialize CG2900 UART resources.
+ * @pdev: Platform device.
+ *
+ * This function initializes the module and registers to the UART framework.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * -ECHILD for failed work queue creation.
+ * Error codes generated by tty_register_ldisc.
+ */
+static int __devinit cg2900_uart_probe(struct platform_device *pdev)
+{
+ int err = 0;
+ struct uart_info *uart_info;
+ struct hci_uart_proto *p;
+ struct resource *resource;
+
+ pr_debug("cg2900_uart_probe");
+
+ uart_info = kzalloc(sizeof(*uart_info), GFP_KERNEL);
+ if (!uart_info) {
+ pr_err("Couldn't allocate uart_info");
+ return -ENOMEM;
+ }
+
+ uart_info->sleep_state = CHIP_POWERED_DOWN;
+ mutex_init(&(uart_info->sleep_state_lock));
+
+ spin_lock_init(&(uart_info->transmission_lock));
+
+ uart_info->chip_dev.t_cb.open = uart_open;
+ uart_info->chip_dev.t_cb.close = uart_close;
+ uart_info->chip_dev.t_cb.write = uart_write;
+ uart_info->chip_dev.t_cb.set_chip_power = uart_set_chip_power;
+ uart_info->chip_dev.t_cb.chip_startup_finished =
+ uart_chip_startup_finished;
+ uart_info->chip_dev.pdev = pdev;
+ uart_info->chip_dev.dev = &pdev->dev;
+ uart_info->chip_dev.t_data = uart_info;
+
+ resource = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
+ "cts_irq");
+ if (!resource) {
+ dev_err(&pdev->dev, "CTS IRQ does not exist\n");
+ err = -EINVAL;
+ goto error_handling_free;
+ }
+ uart_info->cts_irq = resource->start;
+
+ resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
+ "cts_gpio");
+ if (!resource) {
+ dev_err(&pdev->dev, "CTS GPIO does not exist\n");
+ err = -EINVAL;
+ goto error_handling_free;
+ }
+ uart_info->cts_gpio = resource->start;
+
+ /* Init UART TX work queue */
+ uart_info->wq = create_singlethread_workqueue(UART_WQ_NAME);
+ if (!uart_info->wq) {
+ dev_err(MAIN_DEV, "Could not create workqueue\n");
+ err = -ECHILD; /* No child processes */
+ goto error_handling_free;
+ }
+
+ /* Initialize sleep work data */
+ uart_info->sleep_work.data = uart_info;
+ INIT_DELAYED_WORK(&uart_info->sleep_work.work, set_chip_sleep_mode);
+
+ /* Initialize wake-up work data */
+ uart_info->wakeup_work.data = uart_info;
+ INIT_WORK(&uart_info->wakeup_work.work, work_wake_up_chip);
+
+ /* Initialize after_receive work data */
+ uart_info->restart_sleep_work.data = uart_info;
+ INIT_WORK(&uart_info->restart_sleep_work.work, work_restart_sleep);
+
+ uart_info->dev = &pdev->dev;
+
+ p = kzalloc(sizeof(*p), GFP_KERNEL);
+ if (!p) {
+ dev_err(MAIN_DEV, "cg2900_uart_probe: Could not allocate p\n");
+ goto error_handling_wq;
+ }
+
+ p->dev = uart_info->dev;
+ p->id = HCI_UART_STE;
+ p->open = &cg2900_hu_open;
+ p->close = &cg2900_hu_close;
+ p->recv = &cg2900_hu_receive;
+ p->dequeue = &cg2900_hu_dequeue;
+ p->flush = &cg2900_hu_flush;
+
+ dev_set_drvdata(uart_info->dev, (void *)uart_info);
+
+ err = hci_uart_register_proto(p);
+ if (err) {
+ dev_err(MAIN_DEV, "cg2900_uart_probe: Can not register "
+ "protocol\n");
+ kfree(p);
+ goto error_handling_wq;
+ }
+
+ goto finished;
+
+error_handling_wq:
+ destroy_workqueue(uart_info->wq);
+error_handling_free:
+ kfree(uart_info);
+ uart_info = NULL;
+finished:
+ return err;
+}
+
+/**
+ * cg2900_uart_remove() - Release CG2900 UART resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes generated by tty_unregister_ldisc.
+ */
+static int __devexit cg2900_uart_remove(struct platform_device *pdev)
+{
+ struct uart_info *uart_info = dev_get_drvdata(&pdev->dev);
+
+ pr_debug("cg2900_uart_remove");
+
+ if (!uart_info)
+ return -ECHILD;
+
+ if (uart_info->hu)
+ hci_uart_unregister_proto(uart_info->hu->proto);
+
+ destroy_workqueue(uart_info->wq);
+
+ dev_info(MAIN_DEV, "CG2900 UART removed\n");
+ kfree(uart_info);
+ uart_info = NULL;
+ return 0;
+}
+
+static struct platform_driver cg2900_uart_driver = {
+ .driver = {
+ .name = "cg2900-uart",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_uart_probe,
+ .remove = __devexit_p(cg2900_uart_remove),
+#ifdef CONFIG_PM
+ .suspend = cg2900_uart_suspend,
+ .resume = cg2900_uart_resume
+#endif
+};
+
+
+/**
+ * cg2900_uart_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_uart_init(void)
+{
+ pr_debug("cg2900_uart_init");
+ return platform_driver_register(&cg2900_uart_driver);
+}
+
+/**
+ * cg2900_uart_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_uart_exit(void)
+{
+ pr_debug("cg2900_uart_exit");
+ platform_driver_unregister(&cg2900_uart_driver);
+}
+
+module_init(cg2900_uart_init);
+module_exit(cg2900_uart_exit);
+
+module_param(uart_default_baud, int, S_IRUGO);
+MODULE_PARM_DESC(uart_default_baud,
+ "Default UART baud rate, e.g. 115200. If not set 115200 will "
+ "be used.");
+
+module_param(uart_high_baud, int, S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(uart_high_baud,
+ "High speed UART baud rate, e.g. 4000000. If not set 3000000 "
+ "will be used.");
+
+module_param(uart_debug, int, S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(uart_debug, "Enable/Disable debug. 0 means Debug disabled.");
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ST-Ericsson CG2900 UART Driver");
diff --git a/drivers/staging/cg2900/bluetooth/hci_ldisc.c b/drivers/staging/cg2900/bluetooth/hci_ldisc.c
new file mode 100644
index 0000000..8c79085
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/hci_ldisc.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * This file is a staging solution and shall be integrated into
+ * /drivers/bluetooth/hci_ldisc.c.
+ *
+ * Original hci_ldisc.c file:
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <[email protected]>
+ * Copyright (C) 2004-2005 Marcel Holtmann <[email protected]>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+#define VERSION "2.3"
+
+#define TTY_BREAK_ON (-1)
+#define TTY_BREAK_OFF (0)
+
+static int reset;
+
+static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
+
+int cg2900_hci_uart_register_proto(struct hci_uart_proto *p)
+{
+ if (p->id >= HCI_UART_MAX_PROTO)
+ return -EINVAL;
+
+ if (hup[p->id])
+ return -EEXIST;
+
+ hup[p->id] = p;
+
+ return 0;
+}
+
+int cg2900_hci_uart_unregister_proto(struct hci_uart_proto *p)
+{
+ if (p->id >= HCI_UART_MAX_PROTO)
+ return -EINVAL;
+
+ if (!hup[p->id])
+ return -EINVAL;
+
+ hup[p->id] = NULL;
+
+ return 0;
+}
+
+static struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
+{
+ if (id >= HCI_UART_MAX_PROTO)
+ return NULL;
+
+ return hup[id];
+}
+
+static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
+{
+ struct hci_dev *hdev = hu->hdev;
+
+ if (!hdev)
+ return;
+
+ /* Update HCI stat counters */
+ switch (pkt_type) {
+ case HCI_COMMAND_PKT:
+ hdev->stat.cmd_tx++;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ hdev->stat.acl_tx++;
+ break;
+
+ case HCI_SCODATA_PKT:
+ hdev->stat.sco_tx++;
+ break;
+ }
+}
+
+static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
+{
+ struct sk_buff *skb = hu->tx_skb;
+
+ if (!skb)
+ skb = hu->proto->dequeue(hu);
+ else
+ hu->tx_skb = NULL;
+
+ return skb;
+}
+
+int cg2900_hci_uart_tx_wakeup(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+
+ if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
+ set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+ return 0;
+ }
+
+ BT_DBG("");
+
+restart:
+ clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+
+ while ((skb = hci_uart_dequeue(hu))) {
+ int len;
+
+ set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ len = tty->ops->write(tty, skb->data, skb->len);
+ if (hdev)
+ hdev->stat.byte_tx += len;
+
+ skb_pull(skb, len);
+ if (skb->len) {
+ hu->tx_skb = skb;
+ break;
+ }
+
+ hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type);
+ kfree_skb(skb);
+ }
+
+ if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
+ goto restart;
+
+ clear_bit(HCI_UART_SENDING, &hu->tx_state);
+ return 0;
+}
+
+int cg2900_hci_uart_set_break(struct hci_uart *hu, bool break_on)
+{
+ struct tty_struct *tty = hu->tty;
+ int state = TTY_BREAK_OFF;
+
+ if (break_on)
+ state = TTY_BREAK_ON;
+
+ if (tty->ops->break_ctl)
+ return tty->ops->break_ctl(tty, state);
+ else
+ return -EOPNOTSUPP;
+}
+
+void cg2900_hci_uart_flow_ctrl(struct hci_uart *hu, bool flow_on)
+{
+ if (flow_on)
+ tty_unthrottle(hu->tty);
+ else
+ tty_throttle(hu->tty);
+}
+
+int cg2900_hci_uart_set_baudrate(struct hci_uart *hu, int baud)
+{
+ struct ktermios old_termios;
+ struct tty_struct *tty = hu->tty;
+
+ if (!tty->ops->set_termios)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&(tty->termios_mutex));
+ /* Start by storing the old termios. */
+ memcpy(&old_termios, tty->termios, sizeof(old_termios));
+
+ tty_encode_baud_rate(tty, baud, baud);
+
+ /* Finally inform the driver */
+ tty->ops->set_termios(tty, &old_termios);
+
+ mutex_unlock(&(tty->termios_mutex));
+
+ return 0;
+}
+
+int cg2900_hci_uart_tiocmget(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+
+ if (!tty->ops->tiocmget)
+ return -EOPNOTSUPP;
+
+ return tty->ops->tiocmget(tty);
+}
+
+void cg2900_hci_uart_flush_buffer(struct hci_uart *hu)
+{
+ tty_driver_flush_buffer(hu->tty);
+}
+
+int cg2900_hci_uart_chars_in_buffer(struct hci_uart *hu)
+{
+ return tty_chars_in_buffer(hu->tty);
+}
+
+/* ------- Interface to HCI layer ------ */
+/* Initialize device */
+static int hci_uart_open(struct hci_dev *hdev)
+{
+ BT_DBG("%s %p", hdev->name, hdev);
+
+ /* Nothing to do for UART driver */
+
+ set_bit(HCI_RUNNING, &hdev->flags);
+
+ return 0;
+}
+
+/* Reset device */
+static int hci_uart_flush(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = (struct hci_uart *) hdev->driver_data;
+ struct tty_struct *tty = hu->tty;
+
+ BT_DBG("hdev %p tty %p", hdev, tty);
+
+ if (hu->tx_skb) {
+ kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
+ }
+
+ /* Flush any pending characters in the driver and discipline. */
+ tty_ldisc_flush(tty);
+ tty_driver_flush_buffer(tty);
+
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ hu->proto->flush(hu);
+
+ return 0;
+}
+
+/* Close device */
+static int hci_uart_close(struct hci_dev *hdev)
+{
+ BT_DBG("hdev %p", hdev);
+
+ if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
+ return 0;
+
+ hci_uart_flush(hdev);
+ hdev->flush = NULL;
+ return 0;
+}
+
+/* Send frames from HCI layer */
+static int hci_uart_send_frame(struct sk_buff *skb)
+{
+ struct hci_dev* hdev = (struct hci_dev *) skb->dev;
+ struct hci_uart *hu;
+
+ if (!hdev) {
+ BT_ERR("Frame for unknown device (hdev=NULL)");
+ return -ENODEV;
+ }
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return -EBUSY;
+
+ hu = (struct hci_uart *) hdev->driver_data;
+
+ BT_DBG("%s: type %d len %d", hdev->name, bt_cb(skb)->pkt_type,
+ skb->len);
+
+ hu->proto->enqueue(hu, skb);
+
+ hci_uart_tx_wakeup(hu);
+
+ return 0;
+}
+
+static void hci_uart_destruct(struct hci_dev *hdev)
+{
+ if (!hdev)
+ return;
+
+ BT_DBG("%s", hdev->name);
+ kfree(hdev->driver_data);
+}
+
+/* ------ LDISC part ------ */
+/* hci_uart_tty_open
+ *
+ * Called when line discipline changed to HCI_UART.
+ *
+ * Arguments:
+ * tty pointer to tty info structure
+ * Return Value:
+ * 0 if success, otherwise error code
+ */
+static int hci_uart_tty_open(struct tty_struct *tty)
+{
+ struct hci_uart *hu = (void *) tty->disc_data;
+
+ BT_DBG("tty %p", tty);
+
+ /* FIXME: This btw is bogus, nothing requires the old ldisc to clear
+ the pointer */
+ if (hu)
+ return -EEXIST;
+
+ /* Error if the tty has no write op instead of leaving an exploitable
+ hole */
+ if (tty->ops->write == NULL)
+ return -EOPNOTSUPP;
+
+ hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+ if (!hu) {
+ BT_ERR("Can't allocate control structure");
+ return -ENFILE;
+ }
+
+ tty->disc_data = hu;
+ hu->tty = tty;
+ tty->receive_room = 65536;
+
+ spin_lock_init(&hu->rx_lock);
+
+ /* Flush any pending characters in the driver and line discipline. */
+
+ /* FIXME: why is this needed. Note don't use ldisc_ref here as the
+ open path is before the ldisc is referencable */
+
+ if (tty->ldisc->ops->flush_buffer)
+ tty->ldisc->ops->flush_buffer(tty);
+ tty_driver_flush_buffer(tty);
+
+ return 0;
+}
+
+/* hci_uart_tty_close()
+ *
+ * Called when the line discipline is changed to something
+ * else, the tty is closed, or the tty detects a hangup.
+ */
+static void hci_uart_tty_close(struct tty_struct *tty)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+
+ BT_DBG("tty %p", tty);
+
+ /* Detach from the tty */
+ tty->disc_data = NULL;
+
+ if (hu) {
+ struct hci_dev *hdev = hu->hdev;
+
+ if (hdev)
+ hci_uart_close(hdev);
+
+ if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ hu->proto->close(hu);
+ if (hdev) {
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+ }
+ }
+ }
+}
+
+/* hci_uart_tty_wakeup()
+ *
+ * Callback for transmit wakeup. Called when low level
+ * device driver can accept more send data.
+ *
+ * Arguments: tty pointer to associated tty instance data
+ * Return Value: None
+ */
+static void hci_uart_tty_wakeup(struct tty_struct *tty)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+
+ BT_DBG("");
+
+ if (!hu)
+ return;
+
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
+ if (tty != hu->tty)
+ return;
+
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ hci_uart_tx_wakeup(hu);
+}
+
+/* hci_uart_tty_receive()
+ *
+ * Called by tty low level driver when receive data is
+ * available.
+ *
+ * Arguments: tty pointer to tty isntance data
+ * data pointer to received data
+ * flags pointer to flags for data
+ * count count of received data in bytes
+ *
+ * Return Value: None
+ */
+static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
+ char *flags, int count)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+
+ if (!hu || tty != hu->tty)
+ return;
+
+ if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return;
+
+ spin_lock(&hu->rx_lock);
+ hu->proto->recv(hu, (void *) data, count);
+ if (hu->hdev)
+ hu->hdev->stat.byte_rx += count;
+ spin_unlock(&hu->rx_lock);
+
+ tty_unthrottle(tty);
+}
+
+static int hci_uart_register_dev(struct hci_uart *hu)
+{
+ struct hci_dev *hdev;
+
+ BT_DBG("");
+
+ /* Initialize and register HCI device */
+ hdev = hci_alloc_dev();
+ if (!hdev) {
+ BT_ERR("Can't allocate HCI device");
+ return -ENOMEM;
+ }
+
+ hu->hdev = hdev;
+
+ hdev->bus = HCI_UART;
+ hdev->driver_data = hu;
+
+ hdev->open = hci_uart_open;
+ hdev->close = hci_uart_close;
+ hdev->flush = hci_uart_flush;
+ hdev->send = hci_uart_send_frame;
+ hdev->destruct = hci_uart_destruct;
+
+ hdev->owner = THIS_MODULE;
+
+ if (!reset)
+ set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+
+ if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
+ set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+ if (hci_register_dev(hdev) < 0) {
+ BT_ERR("Can't register HCI device");
+ hci_free_dev(hdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int hci_uart_set_proto(struct hci_uart *hu, int id)
+{
+ struct hci_uart_proto *p;
+ int err;
+
+ p = hci_uart_get_proto(id);
+ if (!p)
+ return -EPROTONOSUPPORT;
+
+ hu->proto = p;
+
+ err = p->open(hu);
+ if (err)
+ return err;
+
+ /*
+ * Protocol might register hdev by itself.
+ * In that case, there is no need to register it here.
+ */
+ if (!hu->proto->register_hci_dev)
+ return 0;
+
+ err = hci_uart_register_dev(hu);
+ if (err) {
+ p->close(hu);
+ return err;
+ }
+
+ return 0;
+}
+
+/* hci_uart_tty_ioctl()
+ *
+ * Process IOCTL system call for the tty device.
+ *
+ * Arguments:
+ *
+ * tty pointer to tty instance data
+ * file pointer to open file object for device
+ * cmd IOCTL command code
+ * arg argument for IOCTL call (cmd dependent)
+ *
+ * Return Value: Command dependent
+ */
+static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct hci_uart *hu = (void *)tty->disc_data;
+ int err = 0;
+
+ BT_DBG("");
+
+ /* Verify the status of the device */
+ if (!hu)
+ return -EBADF;
+
+ switch (cmd) {
+ case HCIUARTSETPROTO:
+ if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ err = hci_uart_set_proto(hu, arg);
+ if (err) {
+ clear_bit(HCI_UART_PROTO_SET, &hu->flags);
+ return err;
+ }
+ /* Keep file descriptor.*/
+ hu->fd = file;
+ } else
+ return -EBUSY;
+ break;
+
+ case HCIUARTGETPROTO:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return hu->proto->id;
+ return -EUNATCH;
+
+ case HCIUARTGETDEVICE:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+ if (hu->hdev)
+ return hu->hdev->id;
+ else
+ return -ENOMSG;
+ }
+ return -EUNATCH;
+
+ case HCIUARTSETFLAGS:
+ if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+ return -EBUSY;
+ hu->hdev_flags = arg;
+ break;
+
+ case HCIUARTGETFLAGS:
+ return hu->hdev_flags;
+
+ default:
+ err = n_tty_ioctl_helper(tty, file, cmd, arg);
+ break;
+ };
+
+ return err;
+}
+
+/*
+ * We don't provide read/write/poll interface for user space.
+ */
+static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user *buf, size_t nr)
+{
+ return 0;
+}
+
+static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *data, size_t count)
+{
+ return 0;
+}
+
+static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
+ struct file *filp, poll_table *wait)
+{
+ return 0;
+}
+
+static int __init cg2900_hci_uart_init(void)
+{
+ static struct tty_ldisc_ops hci_uart_ldisc;
+ int err;
+
+ BT_INFO("HCI UART driver ver %s", VERSION);
+
+ /* Register the tty discipline */
+
+ memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
+ hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
+ hci_uart_ldisc.name = "n_cg2900_hci";
+ hci_uart_ldisc.open = hci_uart_tty_open;
+ hci_uart_ldisc.close = hci_uart_tty_close;
+ hci_uart_ldisc.read = hci_uart_tty_read;
+ hci_uart_ldisc.write = hci_uart_tty_write;
+ hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
+ hci_uart_ldisc.poll = hci_uart_tty_poll;
+ hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
+ hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
+ hci_uart_ldisc.owner = THIS_MODULE;
+
+ err = tty_register_ldisc(N_CG2900_HCI, &hci_uart_ldisc);
+ if (err) {
+ BT_ERR("HCI line discipline registration failed. (%d)", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit cg2900_hci_uart_exit(void)
+{
+ int err;
+
+ /* Release tty registration of line discipline */
+ err = tty_unregister_ldisc(N_CG2900_HCI);
+ if (err)
+ BT_ERR("Can't unregister HCI line discipline (%d)", err);
+}
+
+module_init(cg2900_hci_uart_init);
+module_exit(cg2900_hci_uart_exit);
+
+module_param(reset, bool, 0644);
+MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl <[email protected]>");
+MODULE_DESCRIPTION("CG2900 Staging Bluetooth HCI UART driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_LDISC(N_CG2900_HCI);
diff --git a/drivers/staging/cg2900/bluetooth/hci_uart.h b/drivers/staging/cg2900/bluetooth/hci_uart.h
new file mode 100644
index 0000000..23a6951
--- /dev/null
+++ b/drivers/staging/cg2900/bluetooth/hci_uart.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * This file is a staging solution and shall be integrated into
+ * /drivers/bluetooth/hci_uart.h.
+ *
+ * Original hci_uart.h file:
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <[email protected]>
+ * Copyright (C) 2004-2005 Marcel Holtmann <[email protected]>
+ */
+
+/*
+ * Staging CG2900 Bluetooth HCI UART. Will be replaced by normal N_HCI when
+ * moved to normal driver folder.
+ */
+#ifndef N_CG2900_HCI
+#define N_CG2900_HCI 23
+#endif /* N_CG2900_HCI */
+
+/* Ioctls */
+#define HCIUARTSETPROTO _IOW('U', 200, int)
+#define HCIUARTGETPROTO _IOR('U', 201, int)
+#define HCIUARTGETDEVICE _IOR('U', 202, int)
+#define HCIUARTSETFLAGS _IOW('U', 203, int)
+#define HCIUARTGETFLAGS _IOR('U', 204, int)
+
+/* UART protocols */
+#define HCI_UART_MAX_PROTO 7
+
+#define HCI_UART_H4 0
+#define HCI_UART_BCSP 1
+#define HCI_UART_3WIRE 2
+#define HCI_UART_H4DS 3
+#define HCI_UART_LL 4
+#define HCI_UART_ATH3K 5
+#define HCI_UART_STE 6
+
+#define HCI_UART_RAW_DEVICE 0
+
+/* UART break and flow control parameters */
+#define BREAK_ON true
+#define BREAK_OFF false
+#define FLOW_ON true
+#define FLOW_OFF false
+
+struct hci_uart;
+
+struct hci_uart_proto {
+ unsigned int id;
+ int (*open)(struct hci_uart *hu);
+ int (*close)(struct hci_uart *hu);
+ int (*flush)(struct hci_uart *hu);
+ int (*recv)(struct hci_uart *hu, void *data, int len);
+ int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
+ struct sk_buff *(*dequeue)(struct hci_uart *hu);
+ bool register_hci_dev;
+ struct device *dev;
+};
+
+struct hci_uart {
+ struct tty_struct *tty;
+ struct hci_dev *hdev;
+ unsigned long flags;
+ unsigned long hdev_flags;
+
+ struct hci_uart_proto *proto;
+ void *priv;
+
+ struct sk_buff *tx_skb;
+ unsigned long tx_state;
+ spinlock_t rx_lock;
+
+ struct file *fd;
+};
+
+/* HCI_UART proto flag bits */
+#define HCI_UART_PROTO_SET 0
+
+/* TX states */
+#define HCI_UART_SENDING 1
+#define HCI_UART_TX_WAKEUP 2
+
+int cg2900_hci_uart_register_proto(struct hci_uart_proto *p);
+int cg2900_hci_uart_unregister_proto(struct hci_uart_proto *p);
+int cg2900_hci_uart_tx_wakeup(struct hci_uart *hu);
+int cg2900_hci_uart_set_baudrate(struct hci_uart *hu, int baud);
+int cg2900_hci_uart_set_break(struct hci_uart *hu, bool break_on);
+int cg2900_hci_uart_tiocmget(struct hci_uart *hu);
+void cg2900_hci_uart_flush_buffer(struct hci_uart *hu);
+void cg2900_hci_uart_flow_ctrl(struct hci_uart *hu, bool flow_on);
+int cg2900_hci_uart_chars_in_buffer(struct hci_uart *hu);
+
+#define hci_uart_register_proto cg2900_hci_uart_register_proto
+#define hci_uart_unregister_proto cg2900_hci_uart_unregister_proto
+#define hci_uart_tx_wakeup cg2900_hci_uart_tx_wakeup
+#define hci_uart_set_baudrate cg2900_hci_uart_set_baudrate
+#define hci_uart_set_break cg2900_hci_uart_set_break
+#define hci_uart_tiocmget cg2900_hci_uart_tiocmget
+#define hci_uart_flush_buffer cg2900_hci_uart_flush_buffer
+#define hci_uart_flow_ctrl cg2900_hci_uart_flow_ctrl
+#define hci_uart_chars_in_buffer cg2900_hci_uart_chars_in_buffer
diff --git a/drivers/staging/cg2900/board-mop500-cg2900.c b/drivers/staging/cg2900/board-mop500-cg2900.c
new file mode 100644
index 0000000..267fc1f
--- /dev/null
+++ b/drivers/staging/cg2900/board-mop500-cg2900.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2008-2011 ST-Ericsson
+ *
+ * Author: Par-Gunnar Hjalmdahl <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/mach-types.h>
+
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "devices-cg2900.h"
+#include "pins-db8500.h"
+
+
+#define CG2900_BT_ENABLE_GPIO 170
+#define CG2900_GBF_ENA_RESET_GPIO 171
+#define CG2900_BT_CTS_GPIO 0
+
+enum cg2900_gpio_pull_sleep cg2900_sleep_gpio[21] = {
+ CG2900_NO_PULL, /* GPIO 0: PTA_CONFX */
+ CG2900_PULL_DN, /* GPIO 1: PTA_STATUS */
+ CG2900_NO_PULL, /* GPIO 2: UART_CTSN */
+ CG2900_PULL_UP, /* GPIO 3: UART_RTSN */
+ CG2900_PULL_UP, /* GPIO 4: UART_TXD */
+ CG2900_NO_PULL, /* GPIO 5: UART_RXD */
+ CG2900_PULL_DN, /* GPIO 6: IOM_DOUT */
+ CG2900_NO_PULL, /* GPIO 7: IOM_FSC */
+ CG2900_NO_PULL, /* GPIO 8: IOM_CLK */
+ CG2900_NO_PULL, /* GPIO 9: IOM_DIN */
+ CG2900_PULL_DN, /* GPIO 10: PWR_REQ */
+ CG2900_PULL_DN, /* GPIO 11: HOST_WAKEUP */
+ CG2900_PULL_DN, /* GPIO 12: IIS_DOUT */
+ CG2900_NO_PULL, /* GPIO 13: IIS_WS */
+ CG2900_NO_PULL, /* GPIO 14: IIS_CLK */
+ CG2900_NO_PULL, /* GPIO 15: IIS_DIN */
+ CG2900_PULL_DN, /* GPIO 16: PTA_FREQ */
+ CG2900_PULL_DN, /* GPIO 17: PTA_RF_ACTIVE */
+ CG2900_NO_PULL, /* GPIO 18: NotConnected (J6428) */
+ CG2900_NO_PULL, /* GPIO 19: EXT_DUTY_CYCLE */
+ CG2900_NO_PULL, /* GPIO 20: EXT_FRM_SYNCH */
+};
+
+static struct platform_device ux500_cg2900_device = {
+ .name = "cg2900",
+};
+
+static struct platform_device ux500_cg2900_chip_device = {
+ .name = "cg2900-chip",
+ .dev = {
+ .parent = &ux500_cg2900_device.dev,
+ },
+};
+
+static struct platform_device ux500_stlc2690_chip_device = {
+ .name = "stlc2690-chip",
+ .dev = {
+ .parent = &ux500_cg2900_device.dev,
+ },
+};
+
+static struct cg2900_platform_data cg2900_test_platform_data = {
+ .bus = HCI_VIRTUAL,
+ .gpio_sleep = cg2900_sleep_gpio,
+};
+
+static struct platform_device ux500_cg2900_test_device = {
+ .name = "cg2900-test",
+ .dev = {
+ .parent = &ux500_cg2900_device.dev,
+ .platform_data = &cg2900_test_platform_data,
+ },
+};
+
+static struct resource cg2900_uart_resources[] = {
+ {
+ .start = CG2900_GBF_ENA_RESET_GPIO,
+ .end = CG2900_GBF_ENA_RESET_GPIO,
+ .flags = IORESOURCE_IO,
+ .name = "gbf_ena_reset",
+ },
+ {
+ .start = CG2900_BT_ENABLE_GPIO,
+ .end = CG2900_BT_ENABLE_GPIO,
+ .flags = IORESOURCE_IO,
+ .name = "bt_enable",
+ },
+ {
+ .start = CG2900_BT_CTS_GPIO,
+ .end = CG2900_BT_CTS_GPIO,
+ .flags = IORESOURCE_IO,
+ .name = "cts_gpio",
+ },
+ {
+ .start = NOMADIK_GPIO_TO_IRQ(CG2900_BT_CTS_GPIO),
+ .end = NOMADIK_GPIO_TO_IRQ(CG2900_BT_CTS_GPIO),
+ .flags = IORESOURCE_IRQ,
+ .name = "cts_irq",
+ },
+};
+
+static pin_cfg_t cg2900_uart_enabled[] = {
+ GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
+ GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
+ GPIO2_U0_RXD | PIN_INPUT_PULLUP,
+ GPIO3_U0_TXD | PIN_OUTPUT_HIGH
+};
+
+static pin_cfg_t cg2900_uart_disabled[] = {
+ GPIO0_GPIO | PIN_INPUT_PULLUP, /* CTS pull up. */
+ GPIO1_GPIO | PIN_OUTPUT_HIGH, /* RTS high-flow off. */
+ GPIO2_GPIO | PIN_INPUT_PULLUP, /* RX pull down. */
+ GPIO3_GPIO | PIN_OUTPUT_LOW /* TX low - break on. */
+};
+
+static struct cg2900_platform_data cg2900_uart_platform_data = {
+ .bus = HCI_UART,
+ .gpio_sleep = cg2900_sleep_gpio,
+ .uart = {
+ .n_uart_gpios = 4,
+ .uart_enabled = cg2900_uart_enabled,
+ .uart_disabled = cg2900_uart_disabled,
+ },
+};
+
+static struct platform_device ux500_cg2900_uart_device = {
+ .name = "cg2900-uart",
+ .dev = {
+ .platform_data = &cg2900_uart_platform_data,
+ .parent = &ux500_cg2900_device.dev,
+ },
+ .num_resources = ARRAY_SIZE(cg2900_uart_resources),
+ .resource = cg2900_uart_resources,
+};
+
+static bool mach_supported(void)
+{
+ if (machine_is_u8500() ||
+ machine_is_u5500() ||
+ machine_is_hrefv60() ||
+ machine_is_nomadik())
+ return true;
+
+ return false;
+}
+
+static int __init board_cg2900_init(void)
+{
+ int err;
+
+ if (!mach_supported())
+ return 0;
+
+ dcg2900_init_platdata(&cg2900_test_platform_data);
+ dcg2900_init_platdata(&cg2900_uart_platform_data);
+
+ err = platform_device_register(&ux500_cg2900_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_cg2900_uart_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_cg2900_test_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_cg2900_chip_device);
+ if (err)
+ return err;
+ err = platform_device_register(&ux500_stlc2690_chip_device);
+ if (err)
+ return err;
+
+ dev_info(&ux500_cg2900_device.dev, "CG2900 initialized\n");
+ return 0;
+}
+
+static void __exit board_cg2900_exit(void)
+{
+ if (!mach_supported())
+ return;
+
+ platform_device_unregister(&ux500_stlc2690_chip_device);
+ platform_device_unregister(&ux500_cg2900_chip_device);
+ platform_device_unregister(&ux500_cg2900_test_device);
+ platform_device_unregister(&ux500_cg2900_uart_device);
+ platform_device_unregister(&ux500_cg2900_device);
+
+ dev_info(&ux500_cg2900_device.dev, "CG2900 removed\n");
+}
+
+module_init(board_cg2900_init);
+module_exit(board_cg2900_exit);
diff --git a/drivers/staging/cg2900/devices-cg2900.c b/drivers/staging/cg2900/devices-cg2900.c
new file mode 100644
index 0000000..1f0fd36
--- /dev/null
+++ b/drivers/staging/cg2900/devices-cg2900.c
@@ -0,0 +1,342 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Board specific device support for the Linux Bluetooth HCI H:4 Driver
+ * for ST-Ericsson connectivity controller.
+ */
+#define NAME "devices-cg2900"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <asm-generic/errno-base.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/gpio/nomadik.h>
+
+#include "cg2900.h"
+#include "devices-cg2900.h"
+
+#define BT_VS_POWER_SWITCH_OFF 0xFD40
+
+#define H4_HEADER_LENGTH 0x01
+#define BT_HEADER_LENGTH 0x03
+
+#define STLC2690_HCI_REV 0x0600
+#define CG2900_PG1_HCI_REV 0x0101
+#define CG2900_PG2_HCI_REV 0x0200
+#define CG2900_PG1_SPECIAL_HCI_REV 0x0700
+
+#define CHIP_INITIAL_HIGH_TIMEOUT 5 /* ms */
+#define CHIP_INITIAL_LOW_TIMEOUT 2 /* us */
+
+struct vs_power_sw_off_cmd {
+ __le16 op_code;
+ u8 len;
+ u8 gpio_0_7_pull_up;
+ u8 gpio_8_15_pull_up;
+ u8 gpio_16_20_pull_up;
+ u8 gpio_0_7_pull_down;
+ u8 gpio_8_15_pull_down;
+ u8 gpio_16_20_pull_down;
+} __packed;
+
+struct dcg2900_info {
+ int gbf_gpio;
+ int bt_gpio;
+ bool sleep_gpio_set;
+ u8 gpio_0_7_pull_up;
+ u8 gpio_8_15_pull_up;
+ u8 gpio_16_20_pull_up;
+ u8 gpio_0_7_pull_down;
+ u8 gpio_8_15_pull_down;
+ u8 gpio_16_20_pull_down;
+ spinlock_t pdb_toggle_lock;
+};
+
+static void dcg2900_enable_chip(struct cg2900_chip_dev *dev)
+{
+ struct dcg2900_info *info = dev->b_data;
+ unsigned long flags;
+
+ if (info->gbf_gpio == -1)
+ return;
+
+ /*
+ * Due to a bug in some CG2900 we cannot just set GPIO high to enable
+ * the chip. We must do the following:
+ * 1: Set PDB high
+ * 2: Wait a few milliseconds
+ * 3: Set PDB low
+ * 4: Wait 2 microseconds
+ * 5: Set PDB high
+ * We disable interrupts step 3-5 to assure that step 4 does not take
+ * too long time (which would invalidate the fix).
+ */
+ gpio_set_value(info->gbf_gpio, 1);
+
+ schedule_timeout_uninterruptible(
+ msecs_to_jiffies(CHIP_INITIAL_HIGH_TIMEOUT));
+
+ spin_lock_irqsave(&info->pdb_toggle_lock, flags);
+ gpio_set_value(info->gbf_gpio, 0);
+ udelay(CHIP_INITIAL_LOW_TIMEOUT);
+ gpio_set_value(info->gbf_gpio, 1);
+ spin_unlock_irqrestore(&info->pdb_toggle_lock, flags);
+}
+
+static void dcg2900_disable_chip(struct cg2900_chip_dev *dev)
+{
+ struct dcg2900_info *info = dev->b_data;
+
+ if (info->gbf_gpio != -1)
+ gpio_set_value(info->gbf_gpio, 0);
+}
+
+static struct sk_buff *dcg2900_get_power_switch_off_cmd
+ (struct cg2900_chip_dev *dev, u16 *op_code)
+{
+ struct sk_buff *skb;
+ struct vs_power_sw_off_cmd *cmd;
+ struct dcg2900_info *info;
+ int i;
+
+ /* If connected chip does not support the command return NULL */
+ if (CG2900_PG1_SPECIAL_HCI_REV != dev->chip.hci_revision &&
+ CG2900_PG1_HCI_REV != dev->chip.hci_revision &&
+ CG2900_PG2_HCI_REV != dev->chip.hci_revision)
+ return NULL;
+
+ dev_dbg(dev->dev, "Generating PowerSwitchOff command\n");
+
+ info = dev->b_data;
+
+ skb = alloc_skb(sizeof(*cmd) + H4_HEADER_LENGTH, GFP_KERNEL);
+ if (!skb) {
+ dev_err(dev->dev, "Could not allocate skb\n");
+ return NULL;
+ }
+
+ skb_reserve(skb, H4_HEADER_LENGTH);
+ cmd = (struct vs_power_sw_off_cmd *)skb_put(skb, sizeof(*cmd));
+ cmd->op_code = cpu_to_le16(BT_VS_POWER_SWITCH_OFF);
+ cmd->len = sizeof(*cmd) - BT_HEADER_LENGTH;
+ /*
+ * Enter system specific GPIO settings here:
+ * Section data[3-5] is GPIO pull-up selection
+ * Section data[6-8] is GPIO pull-down selection
+ * Each section is a bitfield where
+ * - byte 0 bit 0 is GPIO 0
+ * - byte 0 bit 1 is GPIO 1
+ * - up to
+ * - byte 2 bit 4 which is GPIO 20
+ * where each bit means:
+ * - 0: No pull-up / no pull-down
+ * - 1: Pull-up / pull-down
+ * All GPIOs are set as input.
+ */
+ if (!info->sleep_gpio_set) {
+ struct cg2900_platform_data *pf_data;
+
+ pf_data = dev_get_platdata(dev->dev);
+ for (i = 0; i < 8; i++) {
+ if (pf_data->gpio_sleep[i] == CG2900_PULL_UP)
+ info->gpio_0_7_pull_up |= (1 << i);
+ else if (pf_data->gpio_sleep[i] == CG2900_PULL_DN)
+ info->gpio_0_7_pull_down |= (1 << i);
+ }
+ for (i = 8; i < 16; i++) {
+ if (pf_data->gpio_sleep[i] == CG2900_PULL_UP)
+ info->gpio_8_15_pull_up |= (1 << (i - 8));
+ else if (pf_data->gpio_sleep[i] == CG2900_PULL_DN)
+ info->gpio_8_15_pull_down |= (1 << (i - 8));
+ }
+ for (i = 16; i < 21; i++) {
+ if (pf_data->gpio_sleep[i] == CG2900_PULL_UP)
+ info->gpio_16_20_pull_up |= (1 << (i - 16));
+ else if (pf_data->gpio_sleep[i] == CG2900_PULL_DN)
+ info->gpio_16_20_pull_down |= (1 << (i - 16));
+ }
+ info->sleep_gpio_set = true;
+ }
+ cmd->gpio_0_7_pull_up = info->gpio_0_7_pull_up;
+ cmd->gpio_8_15_pull_up = info->gpio_8_15_pull_up;
+ cmd->gpio_16_20_pull_up = info->gpio_16_20_pull_up;
+ cmd->gpio_0_7_pull_down = info->gpio_0_7_pull_down;
+ cmd->gpio_8_15_pull_down = info->gpio_8_15_pull_down;
+ cmd->gpio_16_20_pull_down = info->gpio_16_20_pull_down;
+
+
+ if (op_code)
+ *op_code = BT_VS_POWER_SWITCH_OFF;
+
+ return skb;
+}
+
+static int dcg2900_init(struct cg2900_chip_dev *dev)
+{
+ int err = 0;
+ struct dcg2900_info *info;
+ struct resource *resource;
+ const char *gbf_name;
+ const char *bt_name = NULL;
+
+ /* First retrieve and save the resources */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Could not allocate dcg2900_info\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&info->pdb_toggle_lock);
+
+ if (!dev->pdev->num_resources) {
+ dev_dbg(dev->dev, "No resources available\n");
+ info->gbf_gpio = -1;
+ info->bt_gpio = -1;
+ goto finished;
+ }
+
+ resource = platform_get_resource_byname(dev->pdev, IORESOURCE_IO,
+ "gbf_ena_reset");
+ if (!resource) {
+ dev_err(dev->dev, "GBF GPIO does not exist\n");
+ err = -EINVAL;
+ goto err_handling;
+ }
+ info->gbf_gpio = resource->start;
+ gbf_name = resource->name;
+
+ resource = platform_get_resource_byname(dev->pdev, IORESOURCE_IO,
+ "bt_enable");
+ /* BT Enable GPIO may not exist */
+ if (resource) {
+ info->bt_gpio = resource->start;
+ bt_name = resource->name;
+ }
+
+ /* Now setup the GPIOs */
+ err = gpio_request(info->gbf_gpio, gbf_name);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_request failed with err: %d\n", err);
+ goto err_handling;
+ }
+
+ err = gpio_direction_output(info->gbf_gpio, 0);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_direction_output failed with err: %d\n",
+ err);
+ goto err_handling_free_gpio_gbf;
+ }
+
+ if (!bt_name) {
+ info->bt_gpio = -1;
+ goto finished;
+ }
+
+ err = gpio_request(info->bt_gpio, bt_name);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_request failed with err: %d\n", err);
+ goto err_handling_free_gpio_gbf;
+ }
+
+ err = gpio_direction_output(info->bt_gpio, 1);
+ if (err < 0) {
+ dev_err(dev->dev, "gpio_direction_output failed with err: %d\n",
+ err);
+ goto err_handling_free_gpio_bt;
+ }
+
+finished:
+ dev->b_data = info;
+ return 0;
+
+err_handling_free_gpio_bt:
+ gpio_free(info->bt_gpio);
+err_handling_free_gpio_gbf:
+ gpio_free(info->gbf_gpio);
+err_handling:
+ kfree(info);
+ return err;
+}
+
+static void dcg2900_exit(struct cg2900_chip_dev *dev)
+{
+ struct dcg2900_info *info = dev->b_data;
+
+ dcg2900_disable_chip(dev);
+ if (info->bt_gpio != -1)
+ gpio_free(info->bt_gpio);
+ if (info->gbf_gpio != -1)
+ gpio_free(info->gbf_gpio);
+ kfree(info);
+ dev->b_data = NULL;
+}
+
+static int dcg2900_disable_uart(struct cg2900_chip_dev *dev)
+{
+ int err;
+ struct cg2900_platform_data *pdata = dev_get_platdata(dev->dev);
+
+ /*
+ * Without this delay we get interrupt on CTS immediately
+ * due to some turbulences on this line.
+ */
+ mdelay(4);
+
+ /* Disable UART functions. */
+ err = nmk_config_pins(pdata->uart.uart_disabled,
+ pdata->uart.n_uart_gpios);
+ if (err)
+ goto error;
+
+ return 0;
+
+error:
+ (void)nmk_config_pins(pdata->uart.uart_enabled,
+ pdata->uart.n_uart_gpios);
+ dev_err(dev->dev, "Cannot set interrupt (%d)\n", err);
+ return err;
+}
+
+static int dcg2900_enable_uart(struct cg2900_chip_dev *dev)
+{
+ int err;
+ struct cg2900_platform_data *pdata = dev_get_platdata(dev->dev);
+
+ /* Restore UART settings. */
+ err = nmk_config_pins(pdata->uart.uart_enabled,
+ pdata->uart.n_uart_gpios);
+ if (err)
+ dev_err(dev->dev, "Unable to enable UART (%d)\n", err);
+
+ return err;
+}
+
+void dcg2900_init_platdata(struct cg2900_platform_data *data)
+{
+ data->init = dcg2900_init;
+ data->exit = dcg2900_exit;
+ data->enable_chip = dcg2900_enable_chip;
+ data->disable_chip = dcg2900_disable_chip;
+ data->get_power_switch_off_cmd = dcg2900_get_power_switch_off_cmd;
+
+ data->uart.enable_uart = dcg2900_enable_uart;
+ data->uart.disable_uart = dcg2900_disable_uart;
+}
diff --git a/drivers/staging/cg2900/devices-cg2900.h b/drivers/staging/cg2900/devices-cg2900.h
new file mode 100644
index 0000000..e365a4f
--- /dev/null
+++ b/drivers/staging/cg2900/devices-cg2900.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Par-Gunnar Hjalmdahl <[email protected]>
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_CG2900_H
+#define __DEVICES_CG2900_H
+
+#include "cg2900.h"
+
+/**
+ * enum cg2900_gpio_pull_sleep - GPIO pull setting in sleep.
+ * @CG2900_NO_PULL: Normal input in sleep (no pull up or down).
+ * @CG2900_PULL_UP: Pull up in sleep.
+ * @CG2900_PULL_DN: Pull down in sleep.
+ */
+enum cg2900_gpio_pull_sleep {
+ CG2900_NO_PULL,
+ CG2900_PULL_UP,
+ CG2900_PULL_DN
+};
+
+/**
+ * dcg2900_init_platdata() - Initializes platform data with callback functions.
+ * @data: Platform data.
+ */
+extern void dcg2900_init_platdata(struct cg2900_platform_data *data);
+
+#endif /* __DEVICES_CG2900_H */
diff --git a/drivers/staging/cg2900/include/cg2900.h b/drivers/staging/cg2900/include/cg2900.h
new file mode 100644
index 0000000..476ce15
--- /dev/null
+++ b/drivers/staging/cg2900/include/cg2900.h
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 connectivity
+ * controller.
+ */
+
+#ifndef _CG2900_H_
+#define _CG2900_H_
+
+#include <linux/types.h>
+
+/* Perform reset. No parameters used */
+#define CG2900_CHAR_DEV_IOCTL_RESET _IOW('U', 210, int)
+/* Check for reset */
+#define CG2900_CHAR_DEV_IOCTL_CHECK4RESET _IOR('U', 212, int)
+/* Retrieve revision info */
+#define CG2900_CHAR_DEV_IOCTL_GET_REVISION _IOR('U', 213, \
+ struct cg2900_rev_data)
+
+#define CG2900_CHAR_DEV_IOCTL_EVENT_IDLE 0
+#define CG2900_CHAR_DEV_IOCTL_EVENT_RESET 1
+
+/**
+ * struct cg2900_rev_data - Contains revision data for the local controller.
+ * @revision: Revision of the controller, e.g. to indicate that it is
+ * a CG2900 controller.
+ * @sub_version: Subversion of the controller, e.g. to indicate a certain
+ * tape-out of the controller.
+ *
+ * The values to match retrieved values to each controller may be retrieved from
+ * the manufacturer.
+ */
+struct cg2900_rev_data {
+ int revision;
+ int sub_version;
+};
+
+#ifdef __KERNEL__
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+
+/* Temporary solution while in staging directory */
+#include "cg2900_hci.h"
+
+/**
+ * struct cg2900_chip_rev_info - Chip info structure.
+ * @manufacturer: Chip manufacturer.
+ * @hci_version: Bluetooth version supported over HCI.
+ * @hci_revision: Chip revision, i.e. which chip is this.
+ * @lmp_pal_version: Bluetooth version supported over air.
+ * @hci_sub_version: Chip sub-version, i.e. which tape-out is this.
+ *
+ * Note that these values match the Bluetooth Assigned Numbers,
+ * see http://www.bluetooth.org/
+ */
+struct cg2900_chip_rev_info {
+ u16 manufacturer;
+ u8 hci_version;
+ u16 hci_revision;
+ u8 lmp_pal_version;
+ u16 hci_sub_version;
+};
+
+struct cg2900_chip_dev;
+
+/**
+ * struct cg2900_id_callbacks - Chip handler identification callbacks.
+ * @check_chip_support: Called when chip is connected. If chip is supported by
+ * driver, return true and fill in @callbacks in @dev.
+ *
+ * Note that the callback may be NULL. It must always be NULL checked before
+ * calling.
+ */
+struct cg2900_id_callbacks {
+ bool (*check_chip_support)(struct cg2900_chip_dev *dev);
+};
+
+/**
+ * struct cg2900_chip_callbacks - Callback functions registered by chip handler.
+ * @data_from_chip: Called when data shall be transmitted to user.
+ * @chip_removed: Called when chip is removed.
+ *
+ * Note that some callbacks may be NULL. They must always be NULL checked before
+ * calling.
+ */
+struct cg2900_chip_callbacks {
+ void (*data_from_chip)(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb);
+ void (*chip_removed)(struct cg2900_chip_dev *dev);
+};
+
+/**
+ * struct cg2900_trans_callbacks - Callback functions registered by transport.
+ * @open: CG2900 Core needs a transport.
+ * @close: CG2900 Core does not need a transport.
+ * @write: CG2900 Core transmits to the chip.
+ * @set_chip_power: CG2900 Core enables or disables the chip.
+ * @chip_startup_finished: CG2900 Chip startup finished notification.
+ *
+ * Note that some callbacks may be NULL. They must always be NULL checked before
+ * calling.
+ */
+struct cg2900_trans_callbacks {
+ int (*open)(struct cg2900_chip_dev *dev);
+ int (*close)(struct cg2900_chip_dev *dev);
+ int (*write)(struct cg2900_chip_dev *dev, struct sk_buff *skb);
+ void (*set_chip_power)(struct cg2900_chip_dev *dev, bool chip_on);
+ void (*chip_startup_finished)(struct cg2900_chip_dev *dev);
+};
+
+/**
+ * struct cg2900_chip_dev - Chip handler info structure.
+ * @dev: Device associated with this chip.
+ * @pdev: Platform device associated with this chip.
+ * @chip: Chip info such as manufacturer.
+ * @c_cb: Callback structure for the chip handler.
+ * @t_cb: Callback structure for the transport.
+ * @c_data: Arbitrary data set by chip handler.
+ * @t_data: Arbitrary data set by transport.
+ * @b_data: Arbitrary data set by board handler.
+ * @prv_data: Arbitrary data set by CG2900 Core.
+ */
+struct cg2900_chip_dev {
+ struct device *dev;
+ struct platform_device *pdev;
+ struct cg2900_chip_rev_info chip;
+ struct cg2900_chip_callbacks c_cb;
+ struct cg2900_trans_callbacks t_cb;
+ void *c_data;
+ void *t_data;
+ void *b_data;
+ void *prv_data;
+};
+
+/**
+ * struct cg2900_platform_data - Contains platform data for CG2900.
+ * @init: Callback called upon system start.
+ * @exit: Callback called upon system shutdown.
+ * @enable_chip: Callback called for enabling CG2900 chip.
+ * @disable_chip: Callback called for disabling CG2900 chip.
+ * @get_power_switch_off_cmd: Callback called to retrieve
+ * HCI VS_Power_Switch_Off command (command
+ * HCI requires platform specific GPIO data).
+ * @bus: Transport used, see @include/net/bluetooth/hci.h.
+ * @gpio_sleep: Array of GPIO sleep settings.
+ * @enable_uart: Callback called when switching from UART GPIO to
+ * UART HW.
+ * @disable_uart: Callback called when switching from UART HW to
+ * UART GPIO.
+ * @n_uart_gpios: Number of UART GPIOs.
+ * @uart_enabled: Array of size @n_uart_gpios with GPIO setting for
+ * enabling UART HW (switching from GPIO mode).
+ * @uart_disabled: Array of size @n_uart_gpios with GPIO setting for
+ * disabling UART HW (switching to GPIO mode).
+ * @uart: Platform data structure for UART transport.
+ *
+ * Any callback may be NULL if not needed.
+ */
+struct cg2900_platform_data {
+ int (*init)(struct cg2900_chip_dev *dev);
+ void (*exit)(struct cg2900_chip_dev *dev);
+ void (*enable_chip)(struct cg2900_chip_dev *dev);
+ void (*disable_chip)(struct cg2900_chip_dev *dev);
+ struct sk_buff* (*get_power_switch_off_cmd)(struct cg2900_chip_dev *dev,
+ u16 *op_code);
+
+ __u8 bus;
+ enum cg2900_gpio_pull_sleep *gpio_sleep;
+
+ struct {
+ int (*enable_uart)(struct cg2900_chip_dev *dev);
+ int (*disable_uart)(struct cg2900_chip_dev *dev);
+ int n_uart_gpios;
+ unsigned long *uart_enabled;
+ unsigned long *uart_disabled;
+ } uart;
+};
+
+/**
+ * struct cg2900_user_data - Contains platform data for CG2900 user.
+ * @dev: Current device. Set by CG2900 user upon probe.
+ * @opened: True if channel is opened.
+ * @user_data: Data set and used by CG2900 user.
+ * @private_data: Data set and used by CG2900 driver.
+ * @h4_channel: H4 channel. Set by CG2900 driver.
+ * @is_audio: True if this channel is an audio channel. Set by CG2900
+ * driver.
+ * @chip_independent: True if this channel does not require chip to be
+ * powered. Set by CG2900 driver.
+ * @bt_bus: Transport used, see @include/net/bluetooth/hci.h.
+ * @char_dev_name: Name to be used for character device.
+ * @channel_data: Input data specific to current device.
+ * @open: Open device channel. Set by CG2900 driver.
+ * @close: Close device channel. Set by CG2900 driver.
+ * @reset: Reset connectivity controller. Set by CG2900 driver.
+ * @alloc_skb: Alloc sk_buffer. Set by CG2900 driver.
+ * @write: Write to device channel. Set by CG2900 driver.
+ * @get_local_revision: Get revision data of conncected chip. Set by CG2900
+ * driver.
+ * @read_cb: Callback function called when data is received on the
+ * device channel. Set by CG2900 user. Mandatory.
+ * @reset_cb: Callback function called when the connectivity
+ * controller has been reset. Set by CG2900 user.
+ *
+ * Any callback may be NULL if not needed.
+ */
+struct cg2900_user_data {
+ struct device *dev;
+ bool opened;
+
+ void *user_data;
+ void *private_data;
+
+ int h4_channel;
+ bool is_audio;
+ bool chip_independent;
+
+ union {
+ __u8 bt_bus;
+ char *char_dev_name;
+ } channel_data;
+
+ int (*open)(struct cg2900_user_data *user_data);
+ void (*close)(struct cg2900_user_data *user_data);
+ int (*reset)(struct cg2900_user_data *user_data);
+ struct sk_buff * (*alloc_skb)(unsigned int size, gfp_t priority);
+ int (*write)(struct cg2900_user_data *user_data, struct sk_buff *skb);
+ bool (*get_local_revision)(struct cg2900_user_data *user_data,
+ struct cg2900_rev_data *rev_data);
+
+ void (*read_cb)(struct cg2900_user_data *user_data,
+ struct sk_buff *skb);
+ void (*reset_cb)(struct cg2900_user_data *user_data);
+};
+
+static inline void *cg2900_get_usr(struct cg2900_user_data *dev)
+{
+ if (dev)
+ return dev->user_data;
+ return NULL;
+}
+
+static inline void cg2900_set_usr(struct cg2900_user_data *dev, void *data)
+{
+ if (dev)
+ dev->user_data = data;
+}
+
+static inline void *cg2900_get_prv(struct cg2900_user_data *dev)
+{
+ if (dev)
+ return dev->private_data;
+ return NULL;
+}
+
+static inline void cg2900_set_prv(struct cg2900_user_data *dev, void *data)
+{
+ if (dev)
+ dev->private_data = data;
+}
+
+extern int cg2900_register_chip_driver(struct cg2900_id_callbacks *cb);
+extern void cg2900_deregister_chip_driver(struct cg2900_id_callbacks *cb);
+extern int cg2900_register_trans_driver(struct cg2900_chip_dev *dev);
+extern int cg2900_deregister_trans_driver(struct cg2900_chip_dev *dev);
+extern unsigned long cg2900_get_sleep_timeout(void);
+
+#endif /* __KERNEL__ */
+#endif /* _CG2900_H_ */
diff --git a/drivers/staging/cg2900/include/cg2900_audio.h b/drivers/staging/cg2900/include/cg2900_audio.h
new file mode 100644
index 0000000..ff0f053
--- /dev/null
+++ b/drivers/staging/cg2900/include/cg2900_audio.h
@@ -0,0 +1,473 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth Audio Driver for ST-Ericsson controller.
+ */
+
+#ifndef _CG2900_AUDIO_H_
+#define _CG2900_AUDIO_H_
+
+#include <linux/types.h>
+
+/*
+ * Digital Audio Interface configuration types
+ */
+
+/** CG2900_A2DP_MAX_AVDTP_HDR_LEN - Max length of a AVDTP header.
+ * Max length of a AVDTP header for an A2DP packet.
+ */
+#define CG2900_A2DP_MAX_AVDTP_HDR_LEN 25
+
+/*
+ * Op codes used when writing commands to the audio interface from user space
+ * using the char device.
+ */
+#define CG2900_OPCODE_SET_DAI_CONF 0x01
+#define CG2900_OPCODE_GET_DAI_CONF 0x02
+#define CG2900_OPCODE_CONFIGURE_ENDPOINT 0x03
+#define CG2900_OPCODE_START_STREAM 0x04
+#define CG2900_OPCODE_STOP_STREAM 0x05
+
+/**
+ * enum cg2900_dai_dir - Contains the DAI port directions alternatives.
+ * @DAI_DIR_B_RX_A_TX: Port B as Rx and port A as Tx.
+ * @DAI_DIR_B_TX_A_RX: Port B as Tx and port A as Rx.
+ */
+enum cg2900_dai_dir {
+ DAI_DIR_B_RX_A_TX = 0x00,
+ DAI_DIR_B_TX_A_RX = 0x01
+};
+
+/**
+ * enum cg2900_dai_mode - DAI mode alternatives.
+ * @DAI_MODE_SLAVE: Slave.
+ * @DAI_MODE_MASTER: Master.
+ */
+enum cg2900_dai_mode {
+ DAI_MODE_SLAVE = 0x00,
+ DAI_MODE_MASTER = 0x01
+};
+
+/**
+ * enum cg2900_dai_stream_ratio - Voice stream ratio alternatives.
+ * @STREAM_RATIO_FM16_VOICE16: FM 16kHz, Voice 16kHz.
+ * @STREAM_RATIO_FM16_VOICE8: FM 16kHz, Voice 8kHz.
+ * @STREAM_RATIO_FM48_VOICE16: FM 48kHz, Voice 16Khz.
+ * @STREAM_RATIO_FM48_VOICE8: FM 48kHz, Voice 8kHz.
+ *
+ * Contains the alternatives for the voice stream ratio between the Audio stream
+ * sample rate and the Voice stream sample rate.
+ */
+enum cg2900_dai_stream_ratio {
+ STREAM_RATIO_FM16_VOICE16 = 0x01,
+ STREAM_RATIO_FM16_VOICE8 = 0x02,
+ STREAM_RATIO_FM48_VOICE16 = 0x03,
+ STREAM_RATIO_FM48_VOICE8 = 0x06
+};
+
+/**
+ * enum cg2900_dai_fs_duration - Frame sync duration alternatives.
+ * @SYNC_DURATION_8: 8 frames sync duration.
+ * @SYNC_DURATION_16: 16 frames sync duration.
+ * @SYNC_DURATION_24: 24 frames sync duration.
+ * @SYNC_DURATION_32: 32 frames sync duration.
+ * @SYNC_DURATION_48: 48 frames sync duration.
+ * @SYNC_DURATION_50: 50 frames sync duration.
+ * @SYNC_DURATION_64: 64 frames sync duration.
+ * @SYNC_DURATION_75: 75 frames sync duration.
+ * @SYNC_DURATION_96: 96 frames sync duration.
+ * @SYNC_DURATION_125: 125 frames sync duration.
+ * @SYNC_DURATION_128: 128 frames sync duration.
+ * @SYNC_DURATION_150: 150 frames sync duration.
+ * @SYNC_DURATION_192: 192 frames sync duration.
+ * @SYNC_DURATION_250: 250 frames sync duration.
+ * @SYNC_DURATION_256: 256 frames sync duration.
+ * @SYNC_DURATION_300: 300 frames sync duration.
+ * @SYNC_DURATION_384: 384 frames sync duration.
+ * @SYNC_DURATION_500: 500 frames sync duration.
+ * @SYNC_DURATION_512: 512 frames sync duration.
+ * @SYNC_DURATION_600: 600 frames sync duration.
+ * @SYNC_DURATION_768: 768 frames sync duration.
+ *
+ * This parameter sets the PCM frame sync duration. It is calculated as the
+ * ratio between the bit clock and the frame rate. For example, if the bit
+ * clock is 512 kHz and the stream sample rate is 8 kHz, the PCM frame sync
+ * duration is 512 / 8 = 64.
+ */
+enum cg2900_dai_fs_duration {
+ SYNC_DURATION_8 = 0,
+ SYNC_DURATION_16 = 1,
+ SYNC_DURATION_24 = 2,
+ SYNC_DURATION_32 = 3,
+ SYNC_DURATION_48 = 4,
+ SYNC_DURATION_50 = 5,
+ SYNC_DURATION_64 = 6,
+ SYNC_DURATION_75 = 7,
+ SYNC_DURATION_96 = 8,
+ SYNC_DURATION_125 = 9,
+ SYNC_DURATION_128 = 10,
+ SYNC_DURATION_150 = 11,
+ SYNC_DURATION_192 = 12,
+ SYNC_DURATION_250 = 13,
+ SYNC_DURATION_256 = 14,
+ SYNC_DURATION_300 = 15,
+ SYNC_DURATION_384 = 16,
+ SYNC_DURATION_500 = 17,
+ SYNC_DURATION_512 = 18,
+ SYNC_DURATION_600 = 19,
+ SYNC_DURATION_768 = 20
+};
+
+/**
+ * enum cg2900_dai_bit_clk - Bit Clock alternatives.
+ * @BIT_CLK_128: 128 Kbits clock.
+ * @BIT_CLK_256: 256 Kbits clock.
+ * @BIT_CLK_512: 512 Kbits clock.
+ * @BIT_CLK_768: 768 Kbits clock.
+ * @BIT_CLK_1024: 1024 Kbits clock.
+ * @BIT_CLK_1411_76: 1411.76 Kbits clock.
+ * @BIT_CLK_1536: 1536 Kbits clock.
+ * @BIT_CLK_2000: 2000 Kbits clock.
+ * @BIT_CLK_2048: 2048 Kbits clock.
+ * @BIT_CLK_2400: 2400 Kbits clock.
+ * @BIT_CLK_2823_52: 2823.52 Kbits clock.
+ * @BIT_CLK_3072: 3072 Kbits clock.
+ *
+ * This parameter sets the bit clock speed. This is the clocking of the actual
+ * data. A usual parameter for eSCO voice is 512 kHz.
+ */
+enum cg2900_dai_bit_clk {
+ BIT_CLK_128 = 0x00,
+ BIT_CLK_256 = 0x01,
+ BIT_CLK_512 = 0x02,
+ BIT_CLK_768 = 0x03,
+ BIT_CLK_1024 = 0x04,
+ BIT_CLK_1411_76 = 0x05,
+ BIT_CLK_1536 = 0x06,
+ BIT_CLK_2000 = 0x07,
+ BIT_CLK_2048 = 0x08,
+ BIT_CLK_2400 = 0x09,
+ BIT_CLK_2823_52 = 0x0A,
+ BIT_CLK_3072 = 0x0B
+};
+
+/**
+ * enum cg2900_dai_sample_rate - Sample rates alternatives.
+ * @SAMPLE_RATE_8: 8 kHz sample rate.
+ * @SAMPLE_RATE_16: 16 kHz sample rate.
+ * @SAMPLE_RATE_44_1: 44.1 kHz sample rate.
+ * @SAMPLE_RATE_48: 48 kHz sample rate.
+ */
+enum cg2900_dai_sample_rate {
+ SAMPLE_RATE_8 = 0,
+ SAMPLE_RATE_16 = 1,
+ SAMPLE_RATE_44_1 = 2,
+ SAMPLE_RATE_48 = 3
+};
+
+/**
+ * enum cg2900_dai_port_protocol - Port protocol alternatives.
+ * @PORT_PROTOCOL_PCM: Protocol PCM.
+ * @PORT_PROTOCOL_I2S: Protocol I2S.
+ */
+enum cg2900_dai_port_protocol {
+ PORT_PROTOCOL_PCM = 0x00,
+ PORT_PROTOCOL_I2S = 0x01
+};
+
+/**
+ * enum cg2900_dai_channel_sel - The channel selection alternatives.
+ * @CHANNEL_SELECTION_RIGHT: Right channel used.
+ * @CHANNEL_SELECTION_LEFT: Left channel used.
+ * @CHANNEL_SELECTION_BOTH: Both channels used.
+ */
+enum cg2900_dai_channel_sel {
+ CHANNEL_SELECTION_RIGHT = 0x00,
+ CHANNEL_SELECTION_LEFT = 0x01,
+ CHANNEL_SELECTION_BOTH = 0x02
+};
+
+/**
+ * struct cg2900_dai_conf_i2s_pcm - Port configuration structure.
+ * @mode: Operational mode of the port configured.
+ * @i2s_channel_sel: I2S channels used. Only valid if used in I2S mode.
+ * @slot_0_used: True if SCO slot 0 is used.
+ * @slot_1_used: True if SCO slot 1 is used.
+ * @slot_2_used: True if SCO slot 2 is used.
+ * @slot_3_used: True if SCO slot 3 is used.
+ * @slot_0_dir: Direction of slot 0.
+ * @slot_1_dir: Direction of slot 1.
+ * @slot_2_dir: Direction of slot 2.
+ * @slot_3_dir: Direction of slot 3.
+ * @slot_0_start: Slot 0 start (relative to the PCM frame sync).
+ * @slot_1_start: Slot 1 start (relative to the PCM frame sync)
+ * @slot_2_start: Slot 2 start (relative to the PCM frame sync)
+ * @slot_3_start: Slot 3 start (relative to the PCM frame sync)
+ * @ratio: Voice stream ratio between the Audio stream sample rate
+ * and the Voice stream sample rate.
+ * @protocol: Protocol used on port.
+ * @duration: Frame sync duration.
+ * @clk: Bit clock.
+ * @sample_rate: Sample rate.
+ */
+struct cg2900_dai_conf_i2s_pcm {
+ enum cg2900_dai_mode mode;
+ enum cg2900_dai_channel_sel i2s_channel_sel;
+ bool slot_0_used;
+ bool slot_1_used;
+ bool slot_2_used;
+ bool slot_3_used;
+ enum cg2900_dai_dir slot_0_dir;
+ enum cg2900_dai_dir slot_1_dir;
+ enum cg2900_dai_dir slot_2_dir;
+ enum cg2900_dai_dir slot_3_dir;
+ __u8 slot_0_start;
+ __u8 slot_1_start;
+ __u8 slot_2_start;
+ __u8 slot_3_start;
+ enum cg2900_dai_stream_ratio ratio;
+ enum cg2900_dai_port_protocol protocol;
+ enum cg2900_dai_fs_duration duration;
+ enum cg2900_dai_bit_clk clk;
+ enum cg2900_dai_sample_rate sample_rate;
+};
+
+/**
+ * enum cg2900_dai_half_period - Half period duration alternatives.
+ * @HALF_PER_DUR_8: 8 Bits.
+ * @HALF_PER_DUR_16: 16 Bits.
+ * @HALF_PER_DUR_24: 24 Bits.
+ * @HALF_PER_DUR_25: 25 Bits.
+ * @HALF_PER_DUR_32: 32 Bits.
+ * @HALF_PER_DUR_48: 48 Bits.
+ * @HALF_PER_DUR_64: 64 Bits.
+ * @HALF_PER_DUR_75: 75 Bits.
+ * @HALF_PER_DUR_96: 96 Bits.
+ * @HALF_PER_DUR_128: 128 Bits.
+ * @HALF_PER_DUR_150: 150 Bits.
+ * @HALF_PER_DUR_192: 192 Bits.
+ *
+ * This parameter sets the number of bits contained in each I2S half period,
+ * i.e. each channel slot. A usual value is 16 bits.
+ */
+enum cg2900_dai_half_period {
+ HALF_PER_DUR_8 = 0x00,
+ HALF_PER_DUR_16 = 0x01,
+ HALF_PER_DUR_24 = 0x02,
+ HALF_PER_DUR_25 = 0x03,
+ HALF_PER_DUR_32 = 0x04,
+ HALF_PER_DUR_48 = 0x05,
+ HALF_PER_DUR_64 = 0x06,
+ HALF_PER_DUR_75 = 0x07,
+ HALF_PER_DUR_96 = 0x08,
+ HALF_PER_DUR_128 = 0x09,
+ HALF_PER_DUR_150 = 0x0A,
+ HALF_PER_DUR_192 = 0x0B
+};
+
+/**
+ * enum cg2900_dai_word_width - Word width alternatives.
+ * @WORD_WIDTH_16: 16 bits words.
+ * @WORD_WIDTH_32: 32 bits words.
+ */
+enum cg2900_dai_word_width {
+ WORD_WIDTH_16 = 0x00,
+ WORD_WIDTH_32 = 0x01
+};
+
+/**
+ * struct cg2900_dai_conf_i2s - Port configuration struct for I2S.
+ * @mode: Operational mode of the port.
+ * @half_period: Half period duration.
+ * @channel_sel: Channel selection.
+ * @sample_rate: Sample rate.
+ * @word_width: Word width.
+ */
+struct cg2900_dai_conf_i2s {
+ enum cg2900_dai_mode mode;
+ enum cg2900_dai_half_period half_period;
+ enum cg2900_dai_channel_sel channel_sel;
+ enum cg2900_dai_sample_rate sample_rate;
+ enum cg2900_dai_word_width word_width;
+};
+
+/**
+ * union cg2900_dai_port_conf - DAI port configuration union.
+ * @i2s: The configuration struct for a port supporting only I2S.
+ * @i2s_pcm: The configuration struct for a port supporting both PCM and I2S.
+ */
+union cg2900_dai_port_conf {
+ struct cg2900_dai_conf_i2s i2s;
+ struct cg2900_dai_conf_i2s_pcm i2s_pcm;
+};
+
+/**
+ * enum cg2900_dai_ext_port_id - DAI external port id alternatives.
+ * @PORT_0_I2S: Port id is 0 and it supports only I2S.
+ * @PORT_1_I2S_PCM: Port id is 1 and it supports both I2S and PCM.
+ */
+enum cg2900_dai_ext_port_id {
+ PORT_0_I2S,
+ PORT_1_I2S_PCM
+};
+
+/**
+ * enum cg2900_audio_endpoint_id - Audio endpoint id alternatives.
+ * @ENDPOINT_PORT_0_I2S: Internal audio endpoint of the external I2S
+ * interface.
+ * @ENDPOINT_PORT_1_I2S_PCM: Internal audio endpoint of the external I2S/PCM
+ * interface.
+ * @ENDPOINT_SLIMBUS_VOICE: Internal audio endpoint of the external Slimbus
+ * voice interface. (Currently not supported)
+ * @ENDPOINT_SLIMBUS_AUDIO: Internal audio endpoint of the external Slimbus
+ * audio interface. (Currently not supported)
+ * @ENDPOINT_BT_SCO_INOUT: Bluetooth SCO bidirectional.
+ * @ENDPOINT_BT_A2DP_SRC: Bluetooth A2DP source.
+ * @ENDPOINT_BT_A2DP_SNK: Bluetooth A2DP sink.
+ * @ENDPOINT_FM_RX: FM receive.
+ * @ENDPOINT_FM_TX: FM transmit.
+ * @ENDPOINT_ANALOG_OUT: Analog out.
+ * @ENDPOINT_DSP_AUDIO_IN: DSP audio in.
+ * @ENDPOINT_DSP_AUDIO_OUT: DSP audio out.
+ * @ENDPOINT_DSP_VOICE_IN: DSP voice in.
+ * @ENDPOINT_DSP_VOICE_OUT: DSP voice out.
+ * @ENDPOINT_DSP_TONE_IN: DSP tone in.
+ * @ENDPOINT_BURST_BUFFER_IN: Burst buffer in.
+ * @ENDPOINT_BURST_BUFFER_OUT: Burst buffer out.
+ * @ENDPOINT_MUSIC_DECODER: Music decoder.
+ * @ENDPOINT_HCI_AUDIO_IN: HCI audio in.
+ */
+enum cg2900_audio_endpoint_id {
+ ENDPOINT_PORT_0_I2S,
+ ENDPOINT_PORT_1_I2S_PCM,
+ ENDPOINT_SLIMBUS_VOICE,
+ ENDPOINT_SLIMBUS_AUDIO,
+ ENDPOINT_BT_SCO_INOUT,
+ ENDPOINT_BT_A2DP_SRC,
+ ENDPOINT_BT_A2DP_SNK,
+ ENDPOINT_FM_RX,
+ ENDPOINT_FM_TX,
+ ENDPOINT_ANALOG_OUT,
+ ENDPOINT_DSP_AUDIO_IN,
+ ENDPOINT_DSP_AUDIO_OUT,
+ ENDPOINT_DSP_VOICE_IN,
+ ENDPOINT_DSP_VOICE_OUT,
+ ENDPOINT_DSP_TONE_IN,
+ ENDPOINT_BURST_BUFFER_IN,
+ ENDPOINT_BURST_BUFFER_OUT,
+ ENDPOINT_MUSIC_DECODER,
+ ENDPOINT_HCI_AUDIO_IN
+};
+
+/**
+ * struct cg2900_dai_config - Configuration struct for Digital Audio Interface.
+ * @port: The port id to configure. Acts as a discriminator for @conf parameter
+ * which is a union.
+ * @conf: The configuration union that contains the parameters for the port.
+ */
+struct cg2900_dai_config {
+ enum cg2900_dai_ext_port_id port;
+ union cg2900_dai_port_conf conf;
+};
+
+/*
+ * Endpoint configuration types
+ */
+
+/**
+ * enum cg2900_endpoint_sample_rate - Audio endpoint configuration sample rate alternatives.
+ *
+ * This enum defines the same values as @cg2900_dai_sample_rate, but
+ * is kept to preserve the API.
+ *
+ * @ENDPOINT_SAMPLE_RATE_8_KHZ: 8 kHz sample rate.
+ * @ENDPOINT_SAMPLE_RATE_16_KHZ: 16 kHz sample rate.
+ * @ENDPOINT_SAMPLE_RATE_44_1_KHZ: 44.1 kHz sample rate.
+ * @ENDPOINT_SAMPLE_RATE_48_KHZ: 48 kHz sample rate.
+ */
+enum cg2900_endpoint_sample_rate {
+ ENDPOINT_SAMPLE_RATE_8_KHZ = SAMPLE_RATE_8,
+ ENDPOINT_SAMPLE_RATE_16_KHZ = SAMPLE_RATE_16,
+ ENDPOINT_SAMPLE_RATE_44_1_KHZ = SAMPLE_RATE_44_1,
+ ENDPOINT_SAMPLE_RATE_48_KHZ = SAMPLE_RATE_48
+};
+
+
+/**
+ * struct cg2900_endpoint_config_a2dp_src - A2DP source audio endpoint configurations.
+ * @sample_rate: Sample rate.
+ * @channel_count: Number of channels.
+ */
+struct cg2900_endpoint_config_a2dp_src {
+ enum cg2900_endpoint_sample_rate sample_rate;
+ unsigned int channel_count;
+};
+
+/**
+ * struct cg2900_endpoint_config_fm - Configuration parameters for an FM endpoint.
+ * @sample_rate: The sample rate alternatives for the FM audio endpoints.
+ */
+struct cg2900_endpoint_config_fm {
+ enum cg2900_endpoint_sample_rate sample_rate;
+};
+
+
+/**
+ * struct cg2900_endpoint_config_sco_in_out - SCO audio endpoint configuration structure.
+ * @sample_rate: Sample rate, valid values are
+ * * ENDPOINT_SAMPLE_RATE_8_KHZ
+ * * ENDPOINT_SAMPLE_RATE_16_KHZ.
+ */
+struct cg2900_endpoint_config_sco_in_out {
+ enum cg2900_endpoint_sample_rate sample_rate;
+};
+
+/**
+ * union cg2900_endpoint_config - Different audio endpoint configurations.
+ * @sco: SCO audio endpoint configuration structure.
+ * @a2dp_src: A2DP source audio endpoint configuration structure.
+ * @fm: FM audio endpoint configuration structure.
+ */
+union cg2900_endpoint_config_union {
+ struct cg2900_endpoint_config_sco_in_out sco;
+ struct cg2900_endpoint_config_a2dp_src a2dp_src;
+ struct cg2900_endpoint_config_fm fm;
+};
+
+/**
+ * struct cg2900_endpoint_config - Audio endpoint configuration.
+ * @endpoint_id: Identifies the audio endpoint. Works as a discriminator
+ * for the config union.
+ * @config: Union holding the configuration parameters for
+ * the endpoint.
+ */
+struct cg2900_endpoint_config {
+ enum cg2900_audio_endpoint_id endpoint_id;
+ union cg2900_endpoint_config_union config;
+};
+
+#ifdef __KERNEL__
+#include <linux/device.h>
+
+int cg2900_audio_get_devices(struct device *devices[], __u8 size);
+int cg2900_audio_open(unsigned int *session, struct device *parent);
+int cg2900_audio_close(unsigned int *session);
+int cg2900_audio_set_dai_config(unsigned int session,
+ struct cg2900_dai_config *config);
+int cg2900_audio_get_dai_config(unsigned int session,
+ struct cg2900_dai_config *config);
+int cg2900_audio_config_endpoint(unsigned int session,
+ struct cg2900_endpoint_config *config);
+int cg2900_audio_start_stream(unsigned int session,
+ enum cg2900_audio_endpoint_id ep_1,
+ enum cg2900_audio_endpoint_id ep_2,
+ unsigned int *stream_handle);
+int cg2900_audio_stop_stream(unsigned int session,
+ unsigned int stream_handle);
+
+#endif /* __KERNEL__ */
+#endif /* _CG2900_AUDIO_H_ */
diff --git a/drivers/staging/cg2900/include/cg2900_hci.h b/drivers/staging/cg2900/include/cg2900_hci.h
new file mode 100644
index 0000000..e094a9d
--- /dev/null
+++ b/drivers/staging/cg2900/include/cg2900_hci.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * This file is a staging solution and shall be integrated into
+ * /include/net/bluetooth/hci.h.
+ */
+
+#ifndef __CG2900_HCI_H
+#define __CG2900_HCI_H
+
+#define HCI_EV_HW_ERROR 0x10
+struct hci_ev_hw_error {
+ __u8 hw_code;
+} __packed;
+
+#endif /* __CG2900_HCI_H */
diff --git a/drivers/staging/cg2900/mfd/Makefile b/drivers/staging/cg2900/mfd/Makefile
new file mode 100644
index 0000000..bdbd8de
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for ST-Ericsson CG2900 connectivity combo controller
+#
+
+ccflags-y := \
+ -Idrivers/staging/cg2900/include
+
+obj-$(CONFIG_CG2900) += cg2900_core.o cg2900_lib.o
+export-objs := cg2900_core.o cg2900_lib.o
+
+obj-$(CONFIG_CG2900) += cg2900_char_devices.o
+
+obj-$(CONFIG_CG2900_TEST) += cg2900_test.o
+
+obj-$(CONFIG_CG2900_CHIP) += cg2900_chip.o
+obj-$(CONFIG_STLC2690_CHIP) += stlc2690_chip.o
+
+obj-$(CONFIG_CG2900_AUDIO) += cg2900_audio.o
diff --git a/drivers/staging/cg2900/mfd/cg2900_audio.c b/drivers/staging/cg2900/mfd/cg2900_audio.c
new file mode 100644
index 0000000..6eadd96
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_audio.c
@@ -0,0 +1,3462 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth Audio Driver for ST-Ericsson CG2900 controller.
+ */
+#define NAME "cg2900_audio"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_audio.h"
+#include "cg2900_chip.h"
+
+#define MAX_NBR_OF_USERS 10
+#define FIRST_USER 1
+
+#define DEFAULT_SCO_HANDLE 0x0008
+
+/* Use a timeout of 5 seconds when waiting for a command response */
+#define RESP_TIMEOUT 5000
+
+#define BT_DEV (info->dev_bt)
+#define FM_DEV (info->dev_fm)
+
+/* Bluetooth error codes */
+#define HCI_BT_ERROR_NO_ERROR 0x00
+
+/* Used to select proper API, ignoring subrevisions etc */
+enum chip_revision {
+ CHIP_REV_PG1,
+ CHIP_REV_PG2
+};
+
+/**
+ * enum chip_resp_state - State when communicating with the CG2900 controller.
+ * @IDLE: No outstanding packets to the controller.
+ * @WAITING: Packet has been sent to the controller. Waiting for
+ * response.
+ * @RESP_RECEIVED: Response from controller has been received but not yet
+ * handled.
+ */
+enum chip_resp_state {
+ IDLE,
+ WAITING,
+ RESP_RECEIVED
+};
+
+/**
+ * enum main_state - Main state for the CG2900 Audio driver.
+ * @OPENED: Audio driver has registered to CG2900 Core.
+ * @CLOSED: Audio driver is not registered to CG2900 Core.
+ * @RESET: A reset of CG2900 Core has occurred and no user has re-opened
+ * the audio driver.
+ */
+enum main_state {
+ OPENED,
+ CLOSED,
+ RESET
+};
+
+/**
+ * struct endpoint_list - List for storing endpoint configuration nodes.
+ * @ep_list: Pointer to first node in list.
+ * @management_mutex: Mutex for handling access to list.
+ */
+struct endpoint_list {
+ struct list_head ep_list;
+ struct mutex management_mutex;
+};
+
+/**
+ * struct endpoint_config_node - Node for storing endpoint configuration.
+ * @list: list_head struct.
+ * @endpoint_id: Endpoint ID.
+ * @config: Stored configuration for this endpoint.
+ */
+struct endpoint_config_node {
+ struct list_head list;
+ enum cg2900_audio_endpoint_id endpoint_id;
+ union cg2900_endpoint_config_union config;
+};
+
+/**
+ * struct audio_info - Main CG2900 Audio driver info structure.
+ * @list: list_head struct.
+ * @state: Current state of the CG2900 Audio driver.
+ * @revision: Chip revision, used to select API.
+ * @misc_dev: The misc device created by this driver.
+ * @misc_registered: True if misc device is registered.
+ * @parent: Parent device.
+ * @dev_bt: Device registered by this driver for the BT
+ * audio channel.
+ * @dev_fm: Device registered by this driver for the FM
+ * audio channel.
+ * @management_mutex: Mutex for handling access to CG2900 Audio driver
+ * management.
+ * @bt_mutex: Mutex for handling access to BT audio channel.
+ * @fm_mutex: Mutex for handling access to FM audio channel.
+ * @nbr_of_users_active: Number of sessions open in the CG2900 Audio
+ * driver.
+ * @i2s_config: DAI I2S configuration.
+ * @i2s_pcm_config: DAI PCM_I2S configuration.
+ * @i2s_config_known: @true if @i2s_config has been set,
+ * @false otherwise.
+ * @i2s_pcm_config_known: @true if @i2s_pcm_config has been set,
+ * @false otherwise.
+ * @endpoints: List containing the endpoint configurations.
+ * @stream_ids: Bitmask for in-use stream ids (only used with
+ * PG2 chip API).
+ */
+struct audio_info {
+ struct list_head list;
+ enum main_state state;
+ enum chip_revision revision;
+ struct miscdevice misc_dev;
+ bool misc_registered;
+ struct device *parent;
+ struct device *dev_bt;
+ struct device *dev_fm;
+ struct mutex management_mutex;
+ struct mutex bt_mutex;
+ struct mutex fm_mutex;
+ int nbr_of_users_active;
+ struct cg2900_dai_conf_i2s i2s_config;
+ struct cg2900_dai_conf_i2s_pcm i2s_pcm_config;
+ bool i2s_config_known;
+ bool i2s_pcm_config_known;
+ struct endpoint_list endpoints;
+ u8 stream_ids[16];
+};
+
+/**
+ * struct audio_user - CG2900 audio user info structure.
+ * @session: Stored session for the char device.
+ * @resp_state: State for controller communications.
+ * @info: CG2900 audio info structure.
+ */
+struct audio_user {
+ int session;
+ enum chip_resp_state resp_state;
+ struct audio_info *info;
+};
+
+/**
+ * struct audio_cb_info - Callback info structure registered in @user_data.
+ * @user: Audio user currently awaiting data on the channel.
+ * @wq: Wait queue for this channel.
+ * @skb_queue: Sk buffer queue.
+ */
+struct audio_cb_info {
+ struct audio_user *user;
+ wait_queue_head_t wq;
+ struct sk_buff_head skb_queue;
+};
+
+/**
+ * struct char_dev_info - CG2900 character device info structure.
+ * @session: Stored session for the char device.
+ * @stored_data: Data returned when executing last command, if any.
+ * @stored_data_len: Length of @stored_data in bytes.
+ * @management_mutex: Mutex for handling access to char dev management.
+ * @rw_mutex: Mutex for handling access to char dev writes and reads.
+ * @info: CG2900 audio info struct.
+ * @rx_queue: Data queue.
+ */
+struct char_dev_info {
+ int session;
+ u8 *stored_data;
+ int stored_data_len;
+ struct mutex management_mutex;
+ struct mutex rw_mutex;
+ struct audio_info *info;
+ struct sk_buff_head rx_queue;
+};
+
+/*
+ * cg2900_audio_devices - List of active CG2900 audio devices.
+ */
+LIST_HEAD(cg2900_audio_devices);
+
+/*
+ * cg2900_audio_sessions - Pointers to currently opened sessions (maps
+ * session ID to user info).
+ */
+static struct audio_user *cg2900_audio_sessions[MAX_NBR_OF_USERS];
+
+/*
+ * Internal conversion functions
+ *
+ * Since the CG2900 APIs uses several different ways to encode the
+ * same parameter in different cases, we have to use translator
+ * functions.
+ */
+
+/**
+ * session_config_sample_rate() - Convert sample rate to format used in VS_Set_SessionConfiguration.
+ * @rate: Sample rate in API encoding.
+ */
+static u8 session_config_sample_rate(enum cg2900_endpoint_sample_rate rate)
+{
+ static const u8 codes[] = {
+ [ENDPOINT_SAMPLE_RATE_8_KHZ] = CG2900_BT_SESSION_RATE_8K,
+ [ENDPOINT_SAMPLE_RATE_16_KHZ] = CG2900_BT_SESSION_RATE_16K,
+ [ENDPOINT_SAMPLE_RATE_44_1_KHZ] = CG2900_BT_SESSION_RATE_44_1K,
+ [ENDPOINT_SAMPLE_RATE_48_KHZ] = CG2900_BT_SESSION_RATE_48K
+ };
+
+ return codes[rate];
+}
+
+/**
+ * mc_i2s_sample_rate() - Convert sample rate to format used in VS_Port_Config for I2S.
+ * @rate: Sample rate in API encoding.
+ */
+static u8 mc_i2s_sample_rate(enum cg2900_dai_sample_rate rate)
+{
+ static const u8 codes[] = {
+ [SAMPLE_RATE_8] = CG2900_MC_I2S_SAMPLE_RATE_8,
+ [SAMPLE_RATE_16] = CG2900_MC_I2S_SAMPLE_RATE_16,
+ [SAMPLE_RATE_44_1] = CG2900_MC_I2S_SAMPLE_RATE_44_1,
+ [SAMPLE_RATE_48] = CG2900_MC_I2S_SAMPLE_RATE_48
+ };
+
+ return codes[rate];
+}
+
+/**
+ * mc_pcm_sample_rate() - Convert sample rate to format used in VS_Port_Config for PCM/I2S.
+ * @rate: Sample rate in API encoding.
+ */
+static u8 mc_pcm_sample_rate(enum cg2900_dai_sample_rate rate)
+{
+ static const u8 codes[] = {
+ [SAMPLE_RATE_8] = CG2900_MC_PCM_SAMPLE_RATE_8,
+ [SAMPLE_RATE_16] = CG2900_MC_PCM_SAMPLE_RATE_16,
+ [SAMPLE_RATE_44_1] = CG2900_MC_PCM_SAMPLE_RATE_44_1,
+ [SAMPLE_RATE_48] = CG2900_MC_PCM_SAMPLE_RATE_48
+ };
+
+ return codes[rate];
+}
+
+/**
+ * mc_i2s_channel_select() - Convert channel selection to format used in VS_Port_Config.
+ * @sel: Channel selection in API encoding.
+ */
+static u8 mc_i2s_channel_select(enum cg2900_dai_channel_sel sel)
+{
+ static const u8 codes[] = {
+ [CHANNEL_SELECTION_RIGHT] = CG2900_MC_I2S_RIGHT_CHANNEL,
+ [CHANNEL_SELECTION_LEFT] = CG2900_MC_I2S_LEFT_CHANNEL,
+ [CHANNEL_SELECTION_BOTH] = CG2900_MC_I2S_BOTH_CHANNELS
+ };
+ return codes[sel];
+}
+
+/**
+ * get_fs_duration() - Convert framesync-enumeration to real value.
+ * @duration: Framsync duration (API encoding).
+ *
+ * Returns:
+ * Duration in bits.
+ */
+static u16 get_fs_duration(enum cg2900_dai_fs_duration duration)
+{
+ static const u16 values[] = {
+ [SYNC_DURATION_8] = 8,
+ [SYNC_DURATION_16] = 16,
+ [SYNC_DURATION_24] = 24,
+ [SYNC_DURATION_32] = 32,
+ [SYNC_DURATION_48] = 48,
+ [SYNC_DURATION_50] = 50,
+ [SYNC_DURATION_64] = 64,
+ [SYNC_DURATION_75] = 75,
+ [SYNC_DURATION_96] = 96,
+ [SYNC_DURATION_125] = 125,
+ [SYNC_DURATION_128] = 128,
+ [SYNC_DURATION_150] = 150,
+ [SYNC_DURATION_192] = 192,
+ [SYNC_DURATION_250] = 250,
+ [SYNC_DURATION_256] = 256,
+ [SYNC_DURATION_300] = 300,
+ [SYNC_DURATION_384] = 384,
+ [SYNC_DURATION_500] = 500,
+ [SYNC_DURATION_512] = 512,
+ [SYNC_DURATION_600] = 600,
+ [SYNC_DURATION_768] = 768
+ };
+ return values[duration];
+}
+
+/**
+ * mc_i2s_role() - Convert master/slave encoding to format for I2S-ports.
+ * @mode: Master/slave in API encoding.
+ */
+static u8 mc_i2s_role(enum cg2900_dai_mode mode)
+{
+ if (mode == DAI_MODE_SLAVE)
+ return CG2900_I2S_MODE_SLAVE;
+ else
+ return CG2900_I2S_MODE_MASTER;
+}
+
+/**
+ * mc_pcm_role() - Convert master/slave encoding to format for PCM/I2S-port.
+ * @mode: Master/slave in API encoding.
+ */
+static u8 mc_pcm_role(enum cg2900_dai_mode mode)
+{
+ if (mode == DAI_MODE_SLAVE)
+ return CG2900_PCM_MODE_SLAVE;
+ else
+ return CG2900_PCM_MODE_MASTER;
+}
+
+/**
+ * fm_get_conversion() - Convert sample rate to convert up/down used in X_Set_Control FM commands.
+ * @srate: Sample rate.
+ */
+static u16 fm_get_conversion(enum cg2900_endpoint_sample_rate srate)
+{
+ if (srate >= ENDPOINT_SAMPLE_RATE_44_1_KHZ)
+ return CG2900_FM_CMD_SET_CTRL_CONV_UP;
+ else
+ return CG2900_FM_CMD_SET_CTRL_CONV_DOWN;
+}
+
+/**
+ * get_info() - Return info structure for this device.
+ * @dev: Current device.
+ *
+ * This function returns the info structure on the following basis:
+ * * If dev is NULL return first info struct found. If none is found return
+ * NULL.
+ * * If dev is valid we will return corresponding info struct if dev is the
+ * parent of the info struct or if dev's parent is the parent of the info
+ * struct.
+ * * If dev is valid and no info structure is found, a new info struct is
+ * allocated, initialized, and returned.
+ *
+ * Returns:
+ * Pointer to info struct if there is no error.
+ * NULL if NULL was supplied and no info structure exist.
+ * ERR_PTR(-ENOMEM) if allocation fails.
+ */
+static struct audio_info *get_info(struct device *dev)
+{
+ struct list_head *cursor;
+ struct audio_info *tmp;
+ struct audio_info *info = NULL;
+
+ /*
+ * Find the info structure for dev. If NULL is supplied for dev
+ * just return first device found.
+ */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ if (!dev || tmp->parent == dev->parent || tmp->parent == dev) {
+ info = tmp;
+ break;
+ }
+ }
+
+ if (!dev || info)
+ return info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev, "Could not allocate info struct\n");
+ return ERR_PTR(-ENOMEM);
+ }
+ info->parent = dev->parent;
+
+ /* Initiate the mutexes */
+ mutex_init(&(info->management_mutex));
+ mutex_init(&(info->bt_mutex));
+ mutex_init(&(info->fm_mutex));
+ mutex_init(&(info->endpoints.management_mutex));
+
+ /* Initiate the endpoint list */
+ INIT_LIST_HEAD(&info->endpoints.ep_list);
+
+ list_add_tail(&info->list, &cg2900_audio_devices);
+
+ dev_info(dev, "CG2900 device added\n");
+ return info;
+}
+
+/**
+ * flush_endpoint_list() - Deletes all stored endpoints in @list.
+ * @list: List of endpoints.
+ */
+static void flush_endpoint_list(struct endpoint_list *list)
+{
+ struct list_head *cursor, *next;
+ struct endpoint_config_node *tmp;
+
+ mutex_lock(&list->management_mutex);
+ list_for_each_safe(cursor, next, &(list->ep_list)) {
+ tmp = list_entry(cursor, struct endpoint_config_node, list);
+ list_del(cursor);
+ kfree(tmp);
+ }
+ mutex_unlock(&list->management_mutex);
+}
+
+/**
+ * device_removed() - Remove device from list if there are no channels left.
+ * @info: CG2900 audio info structure.
+ */
+static void device_removed(struct audio_info *info)
+{
+ struct list_head *cursor;
+ struct audio_info *tmp;
+
+ if (info->dev_bt || info->dev_fm)
+ /* There are still devices active */
+ return;
+
+ /* Find the stored info structure */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ if (tmp == info) {
+ list_del(cursor);
+ break;
+ }
+ }
+
+ flush_endpoint_list(&info->endpoints);
+
+ mutex_destroy(&info->management_mutex);
+ mutex_destroy(&info->bt_mutex);
+ mutex_destroy(&info->fm_mutex);
+ mutex_destroy(&info->endpoints.management_mutex);
+
+ kfree(info);
+ pr_info("CG2900 Audio device removed");
+}
+
+/**
+ * read_cb() - Handle data received from STE connectivity driver.
+ * @dev: Device receiving data.
+ * @skb: Buffer with data coming form device.
+ */
+static void read_cb(struct cg2900_user_data *dev, struct sk_buff *skb)
+{
+ struct audio_cb_info *cb_info;
+
+ cb_info = cg2900_get_usr(dev);
+
+ if (!(cb_info->user)) {
+ dev_err(dev->dev, "NULL supplied as cb_info->user\n");
+ return;
+ }
+
+ /* Mark that packet has been received */
+ dev_dbg(dev->dev, "New resp_state: RESP_RECEIVED");
+ cb_info->user->resp_state = RESP_RECEIVED;
+ skb_queue_tail(&cb_info->skb_queue, skb);
+ wake_up_all(&cb_info->wq);
+}
+
+/**
+ * reset_cb() - Reset callback function.
+ * @dev: CG2900_Core device resetting.
+ */
+static void reset_cb(struct cg2900_user_data *dev)
+{
+ struct audio_info *info;
+
+ dev_dbg(dev->dev, "reset_cb\n");
+
+ info = dev_get_drvdata(dev->dev);
+ mutex_lock(&info->management_mutex);
+ info->nbr_of_users_active = 0;
+ info->state = RESET;
+ mutex_unlock(&info->management_mutex);
+}
+
+/**
+ * get_session_user() - Check that supplied session is within valid range.
+ * @session: Session ID.
+ *
+ * Returns:
+ * Audio_user if there is no error.
+ * NULL for bad session ID.
+ */
+static struct audio_user *get_session_user(int session)
+{
+ struct audio_user *audio_user;
+
+ if (session < FIRST_USER || session >= MAX_NBR_OF_USERS) {
+ pr_err("Calling with invalid session %d", session);
+ return NULL;
+ }
+
+ audio_user = cg2900_audio_sessions[session];
+ if (!audio_user)
+ pr_err("Calling with non-opened session %d", session);
+ return audio_user;
+}
+
+/**
+ * del_endpoint_private() - Deletes an endpoint from @list.
+ * @endpoint_id: Endpoint ID.
+ * @list: List of endpoints.
+ *
+ * Deletes an endpoint from the supplied endpoint list.
+ * This function is not protected by any semaphore.
+ */
+static void del_endpoint_private(enum cg2900_audio_endpoint_id endpoint_id,
+ struct endpoint_list *list)
+{
+ struct list_head *cursor, *next;
+ struct endpoint_config_node *tmp;
+
+ list_for_each_safe(cursor, next, &(list->ep_list)) {
+ tmp = list_entry(cursor, struct endpoint_config_node, list);
+ if (tmp->endpoint_id == endpoint_id) {
+ list_del(cursor);
+ kfree(tmp);
+ }
+ }
+}
+
+/**
+ * add_endpoint() - Add endpoint node to @list.
+ * @ep_config: Endpoint configuration.
+ * @list: List of endpoints.
+ *
+ * Add endpoint node to the supplied list and copies supplied config to node.
+ * If a node already exists for the supplied endpoint, the old node is removed
+ * and replaced by the new node.
+ */
+static void add_endpoint(struct cg2900_endpoint_config *ep_config,
+ struct endpoint_list *list)
+{
+ struct endpoint_config_node *item;
+
+ item = kzalloc(sizeof(*item), GFP_KERNEL);
+ if (!item) {
+ pr_err("add_endpoint: Failed to alloc memory");
+ return;
+ }
+
+ /* Store values */
+ item->endpoint_id = ep_config->endpoint_id;
+ memcpy(&(item->config), &(ep_config->config), sizeof(item->config));
+
+ mutex_lock(&(list->management_mutex));
+
+ /*
+ * Check if endpoint ID already exist in list.
+ * If that is the case, remove it.
+ */
+ if (!list_empty(&(list->ep_list)))
+ del_endpoint_private(ep_config->endpoint_id, list);
+
+ list_add_tail(&(item->list), &(list->ep_list));
+
+ mutex_unlock(&(list->management_mutex));
+}
+
+/**
+ * find_endpoint() - Finds endpoint identified by @endpoint_id in @list.
+ * @endpoint_id: Endpoint ID.
+ * @list: List of endpoints.
+ *
+ * Returns:
+ * Endpoint configuration if there is no error.
+ * NULL if no configuration can be found for @endpoint_id.
+ */
+static union cg2900_endpoint_config_union *
+find_endpoint(enum cg2900_audio_endpoint_id endpoint_id,
+ struct endpoint_list *list)
+{
+ struct list_head *cursor, *next;
+ struct endpoint_config_node *tmp;
+ struct endpoint_config_node *ret_ep = NULL;
+
+ mutex_lock(&list->management_mutex);
+ list_for_each_safe(cursor, next, &(list->ep_list)) {
+ tmp = list_entry(cursor, struct endpoint_config_node, list);
+ if (tmp->endpoint_id == endpoint_id) {
+ ret_ep = tmp;
+ break;
+ }
+ }
+ mutex_unlock(&list->management_mutex);
+
+ if (ret_ep)
+ return &(ret_ep->config);
+ else
+ return NULL;
+}
+
+/**
+ * new_stream_id() - Allocate a new stream id.
+ * @info: Current audio info struct.
+ *
+ * Returns:
+ * 0-127 new valid id.
+ * -ENOMEM if no id is available.
+ */
+static s8 new_stream_id(struct audio_info *info)
+{
+ int r;
+
+ mutex_lock(&info->management_mutex);
+
+ r = find_first_zero_bit(info->stream_ids,
+ 8 * sizeof(info->stream_ids));
+
+ if (r >= 8 * sizeof(info->stream_ids)) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ set_bit(r, (unsigned long int *)info->stream_ids);
+
+out:
+ mutex_unlock(&info->management_mutex);
+ return r;
+}
+
+/**
+ * release_stream_id() - Release a stream id.
+ * @info: Current audio info struct.
+ * @id: Stream to release.
+ */
+static void release_stream_id(struct audio_info *info, u8 id)
+{
+ if (id >= 8 * sizeof(info->stream_ids))
+ return;
+
+ mutex_lock(&info->management_mutex);
+ clear_bit(id, (unsigned long int *)info->stream_ids);
+ mutex_unlock(&info->management_mutex);
+}
+
+/**
+ * receive_fm_write_response() - Wait for and handle the response to an FM Legacy WriteCommand request.
+ * @audio_user: Audio user to check for.
+ * @command: FM command to wait for.
+ *
+ * This function first waits (up to 5 seconds) for a response to an FM
+ * write command and when one arrives, it checks that it is the one we
+ * are waiting for and also that no error has occurred.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int receive_fm_write_response(struct audio_user *audio_user,
+ u16 command)
+{
+ int err = 0;
+ int res;
+ struct sk_buff *skb;
+ struct fm_leg_cmd_cmpl *pkt;
+ u16 rsp_cmd;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = audio_user->info;
+ pf_data = dev_get_platdata(info->dev_fm);
+ cb_info = cg2900_get_usr(pf_data);
+
+ /*
+ * Wait for callback to receive command complete and then wake us up
+ * again.
+ */
+ res = wait_event_timeout(cb_info->wq,
+ audio_user->resp_state == RESP_RECEIVED,
+ msecs_to_jiffies(RESP_TIMEOUT));
+ if (!res) {
+ dev_err(FM_DEV, "Timeout while waiting for return packet\n");
+ return -ECOMM;
+ } else if (res < 0) {
+ dev_err(FM_DEV,
+ "Error %d occurred while waiting for return packet\n",
+ res);
+ return -ECOMM;
+ }
+
+ /* OK, now we should have received answer. Let's check it. */
+ skb = skb_dequeue_tail(&cb_info->skb_queue);
+ if (!skb) {
+ dev_err(FM_DEV, "No skb in queue when it should be there\n");
+ return -EIO;
+ }
+
+ pkt = (struct fm_leg_cmd_cmpl *)skb->data;
+
+ /* Check if we received the correct event */
+ if (pkt->opcode != CG2900_FM_GEN_ID_LEGACY) {
+ dev_err(FM_DEV,
+ "Received unknown FM packet. 0x%X %X %X %X %X\n",
+ skb->data[0], skb->data[1], skb->data[2],
+ skb->data[3], skb->data[4]);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ /* FM Legacy Command complete event */
+ rsp_cmd = cg2900_get_fm_cmd_id(le16_to_cpu(pkt->response_head));
+
+ if (pkt->fm_function != CG2900_FM_CMD_PARAM_WRITECOMMAND ||
+ rsp_cmd != command) {
+ dev_err(FM_DEV,
+ "Received unexpected packet func 0x%X cmd 0x%04X\n",
+ pkt->fm_function, rsp_cmd);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ if (pkt->cmd_status != CG2900_FM_CMD_STATUS_COMMAND_SUCCEEDED) {
+ dev_err(FM_DEV, "FM Command failed (%d)\n", pkt->cmd_status);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+ /* Operation succeeded. We are now done */
+
+error_handling_free_skb:
+ kfree_skb(skb);
+ return err;
+}
+
+/**
+ * receive_bt_cmd_complete() - Wait for and handle an BT Command Complete event.
+ * @audio_user: Audio user to check for.
+ * @rsp: Opcode of BT command to wait for.
+ * @data: Pointer to buffer if any received data should be stored (except
+ * status).
+ * @data_len: Length of @data in bytes.
+ *
+ * This function first waits for BT Command Complete event (up to 5 seconds)
+ * and when one arrives, it checks that it is the one we are waiting for and
+ * also that no error has occurred.
+ * If @data is supplied it also copies received data into @data.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int receive_bt_cmd_complete(struct audio_user *audio_user, u16 rsp,
+ void *data, int data_len)
+{
+ int err = 0;
+ int res;
+ struct sk_buff *skb;
+ struct bt_cmd_cmpl_event *evt;
+ u16 opcode;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = audio_user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ /*
+ * Wait for callback to receive command complete and then wake us up
+ * again.
+ */
+ res = wait_event_timeout(cb_info->wq,
+ audio_user->resp_state == RESP_RECEIVED,
+ msecs_to_jiffies(RESP_TIMEOUT));
+ if (!res) {
+ dev_err(BT_DEV, "Timeout while waiting for return packet\n");
+ return -ECOMM;
+ } else if (res < 0) {
+ /* We timed out or an error occurred */
+ dev_err(BT_DEV,
+ "Error %d occurred while waiting for return packet\n",
+ res);
+ return -ECOMM;
+ }
+
+ /* OK, now we should have received answer. Let's check it. */
+ skb = skb_dequeue_tail(&cb_info->skb_queue);
+ if (!skb) {
+ dev_err(BT_DEV, "No skb in queue when it should be there\n");
+ return -EIO;
+ }
+
+ evt = (struct bt_cmd_cmpl_event *)skb->data;
+ if (evt->eventcode != HCI_EV_CMD_COMPLETE) {
+ dev_err(BT_DEV,
+ "We did not receive the event we expected (0x%X)\n",
+ evt->eventcode);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ opcode = le16_to_cpu(evt->opcode);
+ if (opcode != rsp) {
+ dev_err(BT_DEV,
+ "Received cmd complete for unexpected command: "
+ "0x%04X\n", opcode);
+ err = -EIO;
+ goto error_handling_free_skb;
+ }
+
+ if (evt->status != HCI_BT_ERROR_NO_ERROR) {
+ dev_err(BT_DEV, "Received command complete with err %d\n",
+ evt->status);
+ err = -EIO;
+ /*
+ * In data there might be more detailed error code.
+ * Let's copy it.
+ */
+ }
+
+ /*
+ * Copy the rest of the parameters if a buffer has been supplied.
+ * The caller must have set the length correctly.
+ */
+ if (data)
+ memcpy(data, evt->data, data_len);
+
+ /* Operation succeeded. We are now done */
+
+error_handling_free_skb:
+ kfree_skb(skb);
+ return err;
+}
+
+/**
+ * send_vs_delete_stream() - Delete an audio stream defined by @stream_handle.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: Handle of the audio stream.
+ *
+ * This function is used to delete an audio stream defined by a stream
+ * handle.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * Errors from @cg2900_write.
+ * -EIO for other errors.
+ */
+static int send_vs_delete_stream(struct audio_user *audio_user,
+ unsigned int stream_handle)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ u16 opcode;
+ struct audio_info *info = audio_user->info;
+ struct cg2900_user_data *pf_data = dev_get_platdata(info->dev_bt);
+ struct audio_cb_info *cb_info = cg2900_get_usr(pf_data);
+
+ /* Now delete the stream - format command... */
+ if (info->revision == CHIP_REV_PG1) {
+ struct bt_vs_reset_session_cfg_cmd *cmd;
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Reset_Session_Configuration\n");
+
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "Could not allocate skb\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ cmd = (struct bt_vs_reset_session_cfg_cmd *)
+ skb_put(skb, sizeof(*cmd));
+
+ opcode = CG2900_BT_VS_RESET_SESSION_CONFIG;
+ cmd->opcode = cpu_to_le16(opcode);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd));
+ cmd->id = (u8)stream_handle;
+ } else {
+ struct mc_vs_delete_stream_cmd *cmd;
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Delete_Stream\n");
+
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "Could not allocate skb\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ cmd = (struct mc_vs_delete_stream_cmd *)
+ skb_put(skb, sizeof(*cmd));
+
+ opcode = CG2900_MC_VS_DELETE_STREAM;
+ cmd->opcode = cpu_to_le16(opcode);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd));
+ cmd->stream = (u8)stream_handle;
+ }
+
+ /* ...and send it */
+ cb_info->user = audio_user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ audio_user->resp_state = WAITING;
+
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ goto error_handling_free_skb;
+ }
+
+ /* wait for response */
+ if (info->revision == CHIP_REV_PG1) {
+ err = receive_bt_cmd_complete(audio_user, opcode, NULL, 0);
+ } else {
+ u8 vs_err;
+
+ /* All commands in PG2 API returns one byte extra status */
+ err = receive_bt_cmd_complete(audio_user, opcode,
+ &vs_err, sizeof(vs_err));
+
+ if (err)
+ dev_err(BT_DEV,
+ "VS_DELETE_STREAM - failed with error 0x%02X\n",
+ vs_err);
+ else
+ release_stream_id(info, stream_handle);
+ }
+
+ return err;
+
+error_handling_free_skb:
+ kfree_skb(skb);
+ return err;
+}
+
+/**
+ * send_vs_session_ctrl() - Formats an sends a CG2900_BT_VS_SESSION_CTRL command.
+ * @user: Audio user this command belongs to.
+ * @stream_handle: Handle to stream.
+ * @command: Command to execute on stream, should be one of
+ * CG2900_BT_SESSION_START, CG2900_BT_SESSION_STOP,
+ * CG2900_BT_SESSION_PAUSE, CG2900_BT_SESSION_RESUME.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_session_ctrl(struct audio_user *user,
+ u8 stream_handle, u8 command)
+{
+ int err = 0;
+ struct bt_vs_session_ctrl_cmd *pkt;
+ struct sk_buff *skb;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Session_Control handle: %d cmd: %d\n",
+ stream_handle, command);
+
+ skb = pf_data->alloc_skb(sizeof(*pkt), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV,
+ "send_vs_session_ctrl: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ /* Enter data into the skb */
+ pkt = (struct bt_vs_session_ctrl_cmd *) skb_put(skb, sizeof(*pkt));
+
+ pkt->opcode = cpu_to_le16(CG2900_BT_VS_SESSION_CTRL);
+ pkt->plen = BT_PARAM_LEN(sizeof(*pkt));
+ pkt->id = stream_handle;
+ pkt->control = command; /* Start/stop etc */
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ err = receive_bt_cmd_complete(user, CG2900_BT_VS_SESSION_CTRL,
+ NULL, 0);
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_session_config() - Formats an sends a CG2900_BT_VS_SESSION_CONFIG command.
+ * @user: Audio user this command belongs to.
+ * @config_stream: Custom function for configuring the stream.
+ * @priv_data: Private data passed to @config_stream untouched.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Space is allocated for one stream and a custom function is used to
+ * fill in the stream configuration.
+ *
+ * Returns:
+ * 0-255 stream handle if no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_session_config(struct audio_user *user,
+ void(*config_stream)(struct audio_info *, void *,
+ struct session_config_stream *),
+ void *priv_data)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct bt_vs_session_config_cmd *pkt;
+ u8 session_id;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "BT: HCI_VS_Set_Session_Configuration\n");
+
+ skb = pf_data->alloc_skb(sizeof(*pkt), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV,
+ "send_vs_session_config: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ pkt = (struct bt_vs_session_config_cmd *)skb_put(skb, sizeof(*pkt));
+ /* zero the packet so we don't have to set all reserved fields */
+ memset(pkt, 0, sizeof(*pkt));
+
+ /* Common parameters */
+ pkt->opcode = cpu_to_le16(CG2900_BT_VS_SET_SESSION_CONFIG);
+ pkt->plen = BT_PARAM_LEN(sizeof(*pkt));
+ pkt->n_streams = 1; /* 1 stream configuration supplied */
+
+ /* Let the custom-function fill in the rest */
+ config_stream(info, priv_data, &pkt->stream);
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ err = receive_bt_cmd_complete(user,
+ CG2900_BT_VS_SET_SESSION_CONFIG,
+ &session_id, sizeof(session_id));
+ /* Return session id/stream handle if success */
+ if (!err)
+ err = session_id;
+
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_fm_write_1_param() - Formats and sends an FM legacy write command with one parameter.
+ * @user: Audio user this command belongs to.
+ * @command: Command.
+ * @param: Parameter for command.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the fm_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_fm_write_1_param(struct audio_user *user,
+ u16 command, u16 param)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct fm_leg_cmd *cmd;
+ size_t len;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_fm);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(FM_DEV, "send_fm_write_1_param cmd 0x%X param 0x%X\n",
+ command, param);
+
+ /* base package + one parameter */
+ len = sizeof(*cmd) + sizeof(cmd->fm_cmd.data[0]);
+
+ skb = pf_data->alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(FM_DEV,
+ "send_fm_write_1_param: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ cmd = (struct fm_leg_cmd *)skb_put(skb, len);
+
+ cmd->length = CG2900_FM_CMD_PARAM_LEN(len);
+ cmd->opcode = CG2900_FM_GEN_ID_LEGACY;
+ cmd->read_write = CG2900_FM_CMD_LEG_PARAM_WRITE;
+ cmd->fm_function = CG2900_FM_CMD_PARAM_WRITECOMMAND;
+ /* one parameter - builtin assumption for this function */
+ cmd->fm_cmd.head = cpu_to_le16(cg2900_make_fm_cmd_id(command, 1));
+ cmd->fm_cmd.data[0] = cpu_to_le16(param);
+
+ cb_info->user = user;
+ dev_dbg(FM_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(FM_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ err = receive_fm_write_response(user, command);
+finished:
+ dev_dbg(FM_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_stream_ctrl() - Formats an sends a CG2900_MC_VS_STREAM_CONTROL command.
+ * @user: Audio user this command belongs to.
+ * @stream: Stream id.
+ * @command: Start/stop etc.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * While the HCI command allows for multiple streams in one command,
+ * this function only handles one.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_stream_ctrl(struct audio_user *user, u8 stream, u8 command)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct mc_vs_stream_ctrl_cmd *cmd;
+ size_t len;
+ u8 vs_err;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "send_vs_stream_ctrl stream %d command %d\n", stream,
+ command);
+
+ /* basic length + one stream */
+ len = sizeof(*cmd) + sizeof(cmd->stream[0]);
+
+ skb = pf_data->alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "send_vs_stream_ctrl:Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ cmd = (struct mc_vs_stream_ctrl_cmd *)skb_put(skb, len);
+
+ cmd->opcode = cpu_to_le16(CG2900_MC_VS_STREAM_CONTROL);
+ cmd->plen = BT_PARAM_LEN(len);
+ cmd->command = command;
+
+ /* one stream */
+ cmd->n_streams = 1;
+ cmd->stream[0] = stream;
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ /* All commands in PG2 API returns one byte with extra status */
+ err = receive_bt_cmd_complete(user,
+ CG2900_MC_VS_STREAM_CONTROL,
+ &vs_err, sizeof(vs_err));
+ if (err)
+ dev_err(BT_DEV,
+ "VS_STREAM_CONTROL - failed with error 0x%02x\n",
+ vs_err);
+
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_create_stream() - Formats an sends a CG2900_MC_VS_CREATE_STREAM command.
+ * @user: Audio user this command belongs to.
+ * @inport: Stream id.
+ * @outport: Start/stop etc.
+ * @order: Activation order.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_create_stream(struct audio_user *user, u8 inport,
+ u8 outport, u8 order)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct mc_vs_create_stream_cmd *cmd;
+ s8 id;
+ u8 vs_err;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV,
+ "send_vs_create_stream inport %d outport %d order %d\n",
+ inport, outport, order);
+
+ id = new_stream_id(info);
+ if (id < 0) {
+ dev_err(BT_DEV, "No free stream id\n");
+ err = -EIO;
+ goto finished;
+ }
+
+ skb = pf_data->alloc_skb(sizeof(*cmd), GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV,
+ "send_vs_create_stream: Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_release_id;
+ }
+
+ cmd = (struct mc_vs_create_stream_cmd *)skb_put(skb, sizeof(*cmd));
+
+ cmd->opcode = cpu_to_le16(CG2900_MC_VS_CREATE_STREAM);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd));
+ cmd->id = (u8)id;
+ cmd->inport = inport;
+ cmd->outport = outport;
+ cmd->order = order;
+
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished_release_id;
+ }
+
+ /* All commands in PG2 API returns one byte with extra status */
+ err = receive_bt_cmd_complete(user,
+ CG2900_MC_VS_CREATE_STREAM,
+ &vs_err, sizeof(vs_err));
+ if (err) {
+ dev_err(BT_DEV,
+ "VS_CREATE_STREAM - failed with error 0x%02x\n",
+ vs_err);
+ goto finished_release_id;
+ }
+
+ err = id;
+ goto finished;
+
+finished_release_id:
+ release_stream_id(info, id);
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * send_vs_port_cfg() - Formats an sends a CG2900_MC_VS_PORT_CONFIG command.
+ * @user: Audio user this command belongs to.
+ * @port: Port id to configure.
+ * @cfg: Pointer to specific configuration.
+ * @cfglen: Length of configuration.
+ *
+ * Packs and sends a command packet and waits for the response. Must
+ * be called with the bt_mutex held.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int send_vs_port_cfg(struct audio_user *user, u8 port,
+ const void *cfg, size_t cfglen)
+{
+ int err = 0;
+ struct sk_buff *skb;
+ struct mc_vs_port_cfg_cmd *cmd;
+ void *ptr;
+ u8 vs_err;
+ struct audio_cb_info *cb_info;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data;
+
+ info = user->info;
+ pf_data = dev_get_platdata(info->dev_bt);
+ cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "send_vs_port_cfg len %d\n", cfglen);
+
+ skb = pf_data->alloc_skb(sizeof(*cmd) + cfglen, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "send_vs_port_cfg: Could not allocate skb\n");
+ return -ENOMEM;
+ }
+
+ /* Fill in common part */
+ cmd = (struct mc_vs_port_cfg_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->opcode = cpu_to_le16(CG2900_MC_VS_PORT_CONFIG);
+ cmd->plen = BT_PARAM_LEN(sizeof(*cmd) + cfglen);
+ cmd->type = port;
+
+ /* Copy specific configuration */
+ ptr = skb_put(skb, cfglen);
+ memcpy(ptr, cfg, cfglen);
+
+ /* Send */
+ cb_info->user = user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ user->resp_state = WAITING;
+
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ kfree_skb(skb);
+ goto finished;
+ }
+
+ /* All commands in PG2 API returns one byte with extra status */
+ err = receive_bt_cmd_complete(user, CG2900_MC_VS_PORT_CONFIG,
+ &vs_err, sizeof(vs_err));
+ if (err)
+ dev_err(BT_DEV, "VS_PORT_CONFIG - failed with error 0x%02x\n",
+ vs_err);
+
+finished:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ user->resp_state = IDLE;
+ return err;
+}
+
+/**
+ * set_dai_config_pg1() - Internal implementation of @cg2900_audio_set_dai_config for PG1 hardware.
+ * @audio_user: Pointer to audio user struct.
+ * @config: Pointer to the configuration to set.
+ *
+ * Sets the Digital Audio Interface (DAI) configuration for PG1
+ * hardware. This is and internal function and basic
+ * argument-verification should have been done by the caller.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCESS if port is not supported.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int set_dai_config_pg1(struct audio_user *audio_user,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct cg2900_dai_conf_i2s_pcm *i2s_pcm;
+ struct sk_buff *skb = NULL;
+ struct bt_vs_set_hw_cfg_cmd_i2s *i2s_cmd;
+ struct bt_vs_set_hw_cfg_cmd_pcm *pcm_cmd;
+ struct audio_info *info = audio_user->info;
+ struct cg2900_user_data *pf_data = dev_get_platdata(info->dev_bt);
+ struct audio_cb_info *cb_info = cg2900_get_usr(pf_data);
+
+ dev_dbg(BT_DEV, "set_dai_config_pg1 port %d\n", config->port);
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time on
+ * each channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ /* Allocate the sk_buffer. The length is actually a max length since
+ * length varies depending on logical transport.
+ */
+ skb = pf_data->alloc_skb(CG2900_BT_LEN_VS_SET_HARDWARE_CONFIG,
+ GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "set_dai_config_pg1: Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_unlock_mutex;
+ }
+
+ /* Fill in hci-command according to received configuration */
+ switch (config->port) {
+ case PORT_0_I2S:
+ i2s_cmd = (struct bt_vs_set_hw_cfg_cmd_i2s *)
+ skb_put(skb, sizeof(*i2s_cmd));
+
+ i2s_cmd->opcode = cpu_to_le16(CG2900_BT_VS_SET_HARDWARE_CONFIG);
+ i2s_cmd->plen = BT_PARAM_LEN(sizeof(*i2s_cmd));
+
+ i2s_cmd->vp_type = PORT_PROTOCOL_I2S;
+ i2s_cmd->port_id = 0x00; /* First/only I2S port */
+ i2s_cmd->half_period = config->conf.i2s.half_period;
+
+ i2s_cmd->master_slave = mc_i2s_role(config->conf.i2s.mode);
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&info->i2s_config, &config->conf.i2s,
+ sizeof(config->conf.i2s));
+ info->i2s_config_known = true;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ case PORT_1_I2S_PCM:
+ pcm_cmd = (struct bt_vs_set_hw_cfg_cmd_pcm *)
+ skb_put(skb, sizeof(*pcm_cmd));
+
+ pcm_cmd->opcode = cpu_to_le16(CG2900_BT_VS_SET_HARDWARE_CONFIG);
+ pcm_cmd->plen = BT_PARAM_LEN(sizeof(*pcm_cmd));
+
+ i2s_pcm = &config->conf.i2s_pcm;
+
+ /*
+ * PG1 chips don't support I2S over the PCM/I2S bus,
+ * and PG2 chips don't use this command
+ */
+ if (i2s_pcm->protocol != PORT_PROTOCOL_PCM) {
+ dev_err(BT_DEV,
+ "I2S not supported over the PCM/I2S bus\n");
+ err = -EACCES;
+ goto error_handling_free_skb;
+ }
+
+ pcm_cmd->vp_type = PORT_PROTOCOL_PCM;
+ pcm_cmd->port_id = 0x00; /* First/only PCM port */
+
+ HWCONFIG_PCM_SET_MODE(pcm_cmd, mc_pcm_role(i2s_pcm->mode));
+
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 0, i2s_pcm->slot_0_dir);
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 1, i2s_pcm->slot_1_dir);
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 2, i2s_pcm->slot_2_dir);
+ HWCONFIG_PCM_SET_DIR(pcm_cmd, 3, i2s_pcm->slot_3_dir);
+
+ pcm_cmd->bit_clock = i2s_pcm->clk;
+ pcm_cmd->frame_len =
+ cpu_to_le16(get_fs_duration(i2s_pcm->duration));
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&info->i2s_pcm_config, &config->conf.i2s_pcm,
+ sizeof(config->conf.i2s_pcm));
+ info->i2s_pcm_config_known = true;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ default:
+ dev_err(BT_DEV, "Unknown port configuration %d\n",
+ config->port);
+ err = -EACCES;
+ goto error_handling_free_skb;
+ };
+
+ cb_info->user = audio_user;
+ dev_dbg(BT_DEV, "New resp_state: WAITING\n");
+ audio_user->resp_state = WAITING;
+
+ /* Send packet to controller */
+ err = pf_data->write(pf_data, skb);
+ if (err) {
+ dev_err(BT_DEV, "Error %d occurred while transmitting skb\n",
+ err);
+ goto error_handling_free_skb;
+ }
+
+ err = receive_bt_cmd_complete(audio_user,
+ CG2900_BT_VS_SET_HARDWARE_CONFIG,
+ NULL, 0);
+
+ goto finished_unlock_mutex;
+
+error_handling_free_skb:
+ kfree_skb(skb);
+finished_unlock_mutex:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * set_dai_config_pg2() - Internal implementation of @cg2900_audio_set_dai_config for PG2 hardware.
+ * @audio_user: Pointer to audio user struct.
+ * @config: Pointer to the configuration to set.
+ *
+ * Sets the Digital Audio Interface (DAI) configuration for PG2
+ * hardware. This is an internal function and basic
+ * argument-verification should have been done by the caller.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCESS if port is not supported.
+ * -ENOMEM if not possible to allocate packet.
+ * -ECOMM if no response was received.
+ * -EIO for other errors.
+ */
+static int set_dai_config_pg2(struct audio_user *audio_user,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct cg2900_dai_conf_i2s *i2s;
+ struct cg2900_dai_conf_i2s_pcm *i2s_pcm;
+
+ struct mc_vs_port_cfg_i2s i2s_cfg;
+ struct mc_vs_port_cfg_pcm_i2s pcm_cfg;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(BT_DEV, "set_dai_config_pg2 port %d\n", config->port);
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time on
+ * each channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ switch (config->port) {
+ case PORT_0_I2S:
+ i2s = &config->conf.i2s;
+
+ memset(&i2s_cfg, 0, sizeof(i2s_cfg)); /* just to be safe */
+
+ /* master/slave */
+ PORTCFG_I2S_SET_ROLE(i2s_cfg, mc_i2s_role(i2s->mode));
+
+ PORTCFG_I2S_SET_HALFPERIOD(i2s_cfg, i2s->half_period);
+ PORTCFG_I2S_SET_CHANNELS(i2s_cfg,
+ mc_i2s_channel_select(i2s->channel_sel));
+ PORTCFG_I2S_SET_SRATE(i2s_cfg,
+ mc_i2s_sample_rate(i2s->sample_rate));
+ switch (i2s->word_width) {
+ case WORD_WIDTH_16:
+ PORTCFG_I2S_SET_WORDLEN(i2s_cfg, CG2900_MC_I2S_WORD_16);
+ break;
+ case WORD_WIDTH_32:
+ PORTCFG_I2S_SET_WORDLEN(i2s_cfg, CG2900_MC_I2S_WORD_32);
+ break;
+ }
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&(info->i2s_config), &(config->conf.i2s),
+ sizeof(config->conf.i2s));
+ info->i2s_config_known = true;
+ mutex_unlock(&info->management_mutex);
+
+ /* Send */
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_I2S,
+ &i2s_cfg, sizeof(i2s_cfg));
+ break;
+
+ case PORT_1_I2S_PCM:
+ i2s_pcm = &config->conf.i2s_pcm;
+
+ memset(&pcm_cfg, 0, sizeof(pcm_cfg)); /* just to be safe */
+
+ /* master/slave */
+ PORTCFG_PCM_SET_ROLE(pcm_cfg, mc_pcm_role(i2s_pcm->mode));
+
+ /* set direction for all 4 slots */
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 0, i2s_pcm->slot_0_dir);
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 1, i2s_pcm->slot_1_dir);
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 2, i2s_pcm->slot_2_dir);
+ PORTCFG_PCM_SET_DIR(pcm_cfg, 3, i2s_pcm->slot_3_dir);
+
+ /* set used SCO slots, other use cases not supported atm */
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 0, i2s_pcm->slot_0_used);
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 1, i2s_pcm->slot_1_used);
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 2, i2s_pcm->slot_2_used);
+ PORTCFG_PCM_SET_SCO_USED(pcm_cfg, 3, i2s_pcm->slot_3_used);
+
+ /* slot starts */
+ pcm_cfg.slot_start[0] = i2s_pcm->slot_0_start;
+ pcm_cfg.slot_start[1] = i2s_pcm->slot_1_start;
+ pcm_cfg.slot_start[2] = i2s_pcm->slot_2_start;
+ pcm_cfg.slot_start[3] = i2s_pcm->slot_3_start;
+
+ /* audio/voice sample-rate ratio */
+ PORTCFG_PCM_SET_RATIO(pcm_cfg, i2s_pcm->ratio);
+
+ /* PCM or I2S mode */
+ PORTCFG_PCM_SET_MODE(pcm_cfg, i2s_pcm->protocol);
+
+ pcm_cfg.frame_len = i2s_pcm->duration;
+
+ PORTCFG_PCM_SET_BITCLK(pcm_cfg, i2s_pcm->clk);
+ PORTCFG_PCM_SET_SRATE(pcm_cfg,
+ mc_pcm_sample_rate(i2s_pcm->sample_rate));
+
+ /* Store the new configuration */
+ mutex_lock(&info->management_mutex);
+ memcpy(&(info->i2s_pcm_config), &(config->conf.i2s_pcm),
+ sizeof(config->conf.i2s_pcm));
+ info->i2s_pcm_config_known = true;
+ mutex_unlock(&info->management_mutex);
+
+ /* Send */
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_PCM_I2S,
+ &pcm_cfg, sizeof(pcm_cfg));
+ break;
+
+ default:
+ dev_err(BT_DEV, "Unknown port configuration %d\n",
+ config->port);
+ err = -EACCES;
+ };
+
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * struct i2s_fm_stream_config_priv - Helper struct for stream i2s-fm streams.
+ * @fm_config: FM endpoint configuration.
+ * @rx: true for FM-RX, false for FM-TX.
+ */
+struct i2s_fm_stream_config_priv {
+ struct cg2900_endpoint_config_fm *fm_config;
+ bool rx;
+
+};
+
+/**
+ * config_i2s_fm_stream() - Callback for @send_vs_session_config.
+ * @info: Audio info structure.
+ * @_priv: Pointer to a @i2s_fm_stream_config_priv struct.
+ * @cfg: Pointer to stream config block in command packet.
+ *
+ * Fills in stream configuration for I2S-FM RX/TX.
+ */
+
+static void config_i2s_fm_stream(struct audio_info *info, void *_priv,
+ struct session_config_stream *cfg)
+{
+ struct i2s_fm_stream_config_priv *priv = _priv;
+ struct session_config_vport *fm;
+ struct session_config_vport *i2s;
+
+ cfg->media_type = CG2900_BT_SESSION_MEDIA_TYPE_AUDIO;
+
+ if (info->i2s_config.channel_sel == CHANNEL_SELECTION_BOTH)
+ SESSIONCFG_SET_CHANNELS(cfg, CG2900_BT_MEDIA_CONFIG_STEREO);
+ else
+ SESSIONCFG_SET_CHANNELS(cfg, CG2900_BT_MEDIA_CONFIG_MONO);
+
+ SESSIONCFG_I2S_SET_SRATE(cfg,
+ session_config_sample_rate(priv->fm_config->sample_rate));
+
+ cfg->codec_type = CG2900_CODEC_TYPE_NONE;
+ /* codec mode and parameters not used */
+
+ if (priv->rx) {
+ fm = &cfg->inport; /* FM is input */
+ i2s = &cfg->outport; /* I2S is output */
+ } else {
+ i2s = &cfg->inport; /* I2S is input */
+ fm = &cfg->outport; /* FM is output */
+ }
+
+ fm->type = CG2900_BT_VP_TYPE_FM;
+
+ i2s->type = CG2900_BT_VP_TYPE_I2S;
+ i2s->i2s.index = CG2900_BT_SESSION_I2S_INDEX_I2S;
+ i2s->i2s.channel = info->i2s_config.channel_sel;
+}
+
+/**
+ * conn_start_i2s_to_fm_rx() - Start an audio stream connecting FM RX to I2S.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: [out] Pointer where to store the stream handle.
+ *
+ * This function sets up an FM RX to I2S stream.
+ * It does this by first setting the output mode and then the configuration of
+ * the External Sample Rate Converter.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * -EIO for other errors.
+ */
+static int conn_start_i2s_to_fm_rx(struct audio_user *audio_user,
+ unsigned int *stream_handle)
+{
+ int err = 0;
+ union cg2900_endpoint_config_union *fm_config;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(FM_DEV, "conn_start_i2s_to_fm_rx\n");
+
+ fm_config = find_endpoint(ENDPOINT_FM_RX, &info->endpoints);
+ if (!fm_config) {
+ dev_err(FM_DEV, "FM RX not configured before stream start\n");
+ return -EIO;
+ }
+
+ if (!(info->i2s_config_known)) {
+ dev_err(FM_DEV,
+ "I2S DAI not configured before stream start\n");
+ return -EIO;
+ }
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any
+ * time on each channel.
+ */
+ mutex_lock(&info->fm_mutex);
+ mutex_lock(&info->bt_mutex);
+
+ /*
+ * Now set the output mode of the External Sample Rate Converter by
+ * sending HCI_Write command with AUP_EXT_SetMode.
+ */
+ err = send_fm_write_1_param(audio_user,
+ CG2900_FM_CMD_ID_AUP_EXT_SET_MODE,
+ CG2900_FM_CMD_AUP_EXT_SET_MODE_PARALLEL);
+ if (err)
+ goto finished_unlock_mutex;
+
+ /*
+ * Now configure the External Sample Rate Converter by sending
+ * HCI_Write command with AUP_EXT_SetControl.
+ */
+ err = send_fm_write_1_param(
+ audio_user, CG2900_FM_CMD_ID_AUP_EXT_SET_CTRL,
+ fm_get_conversion(fm_config->fm.sample_rate));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* Set up the stream */
+ if (info->revision == CHIP_REV_PG1) {
+ struct i2s_fm_stream_config_priv stream_priv;
+
+ /* Now send HCI_VS_Set_Session_Configuration command */
+ stream_priv.fm_config = &fm_config->fm;
+ stream_priv.rx = true;
+ err = send_vs_session_config(audio_user, config_i2s_fm_stream,
+ &stream_priv);
+ } else {
+ struct mc_vs_port_cfg_fm fm_cfg;
+
+ memset(&fm_cfg, 0, sizeof(fm_cfg));
+
+ /* Configure port FM RX */
+ /* Expects 0-3 - same as user API - so no conversion needed */
+ PORTCFG_FM_SET_SRATE(fm_cfg, (u8)fm_config->fm.sample_rate);
+
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_FM_RX_1,
+ &fm_cfg, sizeof(fm_cfg));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* CreateStream */
+ err = send_vs_create_stream(audio_user,
+ CG2900_MC_PORT_FM_RX_1,
+ CG2900_MC_PORT_I2S,
+ 0); /* chip doesn't care */
+ }
+
+ if (err < 0)
+ goto finished_unlock_mutex;
+
+ /* Store the stream handle (used for start and stop stream) */
+ *stream_handle = (u8)err;
+ dev_dbg(FM_DEV, "stream_handle set to %d\n", *stream_handle);
+
+ /* Now start the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, *stream_handle,
+ CG2900_BT_SESSION_START);
+ else
+ err = send_vs_stream_ctrl(audio_user, *stream_handle,
+ CG2900_MC_STREAM_START);
+ /*Let's delete a stream.*/
+ if (err < 0) {
+ dev_dbg(BT_DEV, "Could not start a stream.");
+ (void)send_vs_delete_stream(audio_user, *stream_handle);
+ }
+
+finished_unlock_mutex:
+ dev_dbg(FM_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ mutex_unlock(&info->fm_mutex);
+ return err;
+}
+
+/**
+ * conn_start_i2s_to_fm_tx() - Start an audio stream connecting FM TX to I2S.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: [out] Pointer where to store the stream handle.
+ *
+ * This function sets up an I2S to FM TX stream.
+ * It does this by first setting the Audio Input source and then setting the
+ * configuration and input source of BT sample rate converter.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * -EIO for other errors.
+ */
+static int conn_start_i2s_to_fm_tx(struct audio_user *audio_user,
+ unsigned int *stream_handle)
+{
+ int err = 0;
+ union cg2900_endpoint_config_union *fm_config;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(FM_DEV, "conn_start_i2s_to_fm_tx\n");
+
+ fm_config = find_endpoint(ENDPOINT_FM_TX, &info->endpoints);
+ if (!fm_config) {
+ dev_err(FM_DEV, "FM TX not configured before stream start\n");
+ return -EIO;
+ }
+
+ if (!(info->i2s_config_known)) {
+ dev_err(FM_DEV,
+ "I2S DAI not configured before stream start\n");
+ return -EIO;
+ }
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time
+ * on each channel.
+ */
+ mutex_lock(&info->fm_mutex);
+ mutex_lock(&info->bt_mutex);
+
+ /*
+ * Select Audio Input Source by sending HCI_Write command with
+ * AIP_SetMode.
+ */
+ dev_dbg(FM_DEV, "FM: AIP_SetMode\n");
+ err = send_fm_write_1_param(audio_user, CG2900_FM_CMD_ID_AIP_SET_MODE,
+ CG2900_FM_CMD_AIP_SET_MODE_INPUT_DIG);
+ if (err)
+ goto finished_unlock_mutex;
+
+ /*
+ * Now configure the BT sample rate converter by sending HCI_Write
+ * command with AIP_BT_SetControl.
+ */
+ dev_dbg(FM_DEV, "FM: AIP_BT_SetControl\n");
+ err = send_fm_write_1_param(
+ audio_user, CG2900_FM_CMD_ID_AIP_BT_SET_CTRL,
+ fm_get_conversion(fm_config->fm.sample_rate));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /*
+ * Now set input of the BT sample rate converter by sending HCI_Write
+ * command with AIP_BT_SetMode.
+ */
+ dev_dbg(FM_DEV, "FM: AIP_BT_SetMode\n");
+ err = send_fm_write_1_param(audio_user,
+ CG2900_FM_CMD_ID_AIP_BT_SET_MODE,
+ CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_PAR);
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* Set up the stream */
+ if (info->revision == CHIP_REV_PG1) {
+ struct i2s_fm_stream_config_priv stream_priv;
+
+ /* Now send HCI_VS_Set_Session_Configuration command */
+ stream_priv.fm_config = &fm_config->fm;
+ stream_priv.rx = false;
+ err = send_vs_session_config(audio_user, config_i2s_fm_stream,
+ &stream_priv);
+ } else {
+ struct mc_vs_port_cfg_fm fm_cfg;
+
+ memset(&fm_cfg, 0, sizeof(fm_cfg));
+
+ /* Configure port FM TX */
+ /* Expects 0-3 - same as user API - so no conversion needed */
+ PORTCFG_FM_SET_SRATE(fm_cfg, (u8)fm_config->fm.sample_rate);
+
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_FM_TX,
+ &fm_cfg, sizeof(fm_cfg));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* CreateStream */
+ err = send_vs_create_stream(audio_user,
+ CG2900_MC_PORT_I2S,
+ CG2900_MC_PORT_FM_TX,
+ 0); /* chip doesn't care */
+ }
+
+ if (err < 0)
+ goto finished_unlock_mutex;
+
+ /* Store the stream handle (used for start and stop stream) */
+ *stream_handle = (u8)err;
+ dev_dbg(FM_DEV, "stream_handle set to %d\n", *stream_handle);
+
+ /* Now start the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, *stream_handle,
+ CG2900_BT_SESSION_START);
+ else
+ err = send_vs_stream_ctrl(audio_user, *stream_handle,
+ CG2900_MC_STREAM_START);
+ /* Let's delete and release stream.*/
+ if (err < 0) {
+ dev_dbg(BT_DEV, "Could not start a stream.");
+ (void)send_vs_delete_stream(audio_user, *stream_handle);
+ }
+
+finished_unlock_mutex:
+ dev_dbg(FM_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ mutex_unlock(&info->fm_mutex);
+ return err;
+}
+
+/**
+ * config_pcm_sco_stream() - Callback for @send_vs_session_config.
+ * @info: Audio info structure.
+ * @_priv: Pointer to a @cg2900_endpoint_config_sco_in_out struct.
+ * @cfg: Pointer to stream config block in command packet.
+ *
+ * Fills in stream configuration for PCM-SCO.
+ */
+static void config_pcm_sco_stream(struct audio_info *info, void *_priv,
+ struct session_config_stream *cfg)
+{
+ struct cg2900_endpoint_config_sco_in_out *sco_ep = _priv;
+
+ cfg->media_type = CG2900_BT_SESSION_MEDIA_TYPE_AUDIO;
+
+ SESSIONCFG_SET_CHANNELS(cfg, CG2900_BT_MEDIA_CONFIG_MONO);
+ SESSIONCFG_I2S_SET_SRATE(cfg,
+ session_config_sample_rate(sco_ep->sample_rate));
+
+ cfg->codec_type = CG2900_CODEC_TYPE_NONE;
+ /* codec mode and parameters not used */
+
+ cfg->inport.type = CG2900_BT_VP_TYPE_BT_SCO;
+ cfg->inport.sco.acl_handle = cpu_to_le16(DEFAULT_SCO_HANDLE);
+
+ cfg->outport.type = CG2900_BT_VP_TYPE_PCM;
+ cfg->outport.pcm.index = CG2900_BT_SESSION_PCM_INDEX_PCM_I2S;
+
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 0,
+ info->i2s_pcm_config.slot_0_used);
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 1,
+ info->i2s_pcm_config.slot_1_used);
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 2,
+ info->i2s_pcm_config.slot_2_used);
+ SESSIONCFG_PCM_SET_USED(cfg->outport, 3,
+ info->i2s_pcm_config.slot_3_used);
+
+ cfg->outport.pcm.slot_start[0] =
+ info->i2s_pcm_config.slot_0_start;
+ cfg->outport.pcm.slot_start[1] =
+ info->i2s_pcm_config.slot_1_start;
+ cfg->outport.pcm.slot_start[2] =
+ info->i2s_pcm_config.slot_2_start;
+ cfg->outport.pcm.slot_start[3] =
+ info->i2s_pcm_config.slot_3_start;
+}
+
+/**
+ * conn_start_pcm_to_sco() - Start an audio stream connecting Bluetooth (e)SCO to PCM_I2S.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: [out] Pointer where to store the stream handle.
+ *
+ * This function sets up a BT to_from PCM_I2S stream. It does this by
+ * first setting the Session configuration and then starting the Audio
+ * Stream.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * Errors from @cg2900_write
+ * -EIO for other errors.
+ */
+static int conn_start_pcm_to_sco(struct audio_user *audio_user,
+ unsigned int *stream_handle)
+{
+ int err = 0;
+ union cg2900_endpoint_config_union *bt_config;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(BT_DEV, "conn_start_pcm_to_sco\n");
+
+ bt_config = find_endpoint(ENDPOINT_BT_SCO_INOUT, &info->endpoints);
+ if (!bt_config) {
+ dev_err(BT_DEV, "BT not configured before stream start\n");
+ return -EIO;
+ }
+
+ if (!(info->i2s_pcm_config_known)) {
+ dev_err(BT_DEV,
+ "I2S_PCM DAI not configured before stream start\n");
+ return -EIO;
+ }
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any time on each
+ * channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ /* Set up the stream */
+ if (info->revision == CHIP_REV_PG1) {
+ err = send_vs_session_config(audio_user, config_pcm_sco_stream,
+ &bt_config->sco);
+ } else {
+ struct mc_vs_port_cfg_sco sco_cfg;
+
+ /* zero codec params etc */
+ memset(&sco_cfg, 0, sizeof(sco_cfg));
+ sco_cfg.acl_id = DEFAULT_SCO_HANDLE;
+ PORTCFG_SCO_SET_WBS(sco_cfg, 0); /* No WBS yet */
+ PORTCFG_SCO_SET_CODEC(sco_cfg, CG2900_CODEC_TYPE_NONE);
+
+ err = send_vs_port_cfg(audio_user, CG2900_MC_PORT_BT_SCO,
+ &sco_cfg, sizeof(sco_cfg));
+ if (err)
+ goto finished_unlock_mutex;
+
+ /* CreateStream */
+ err = send_vs_create_stream(audio_user,
+ CG2900_MC_PORT_PCM_I2S,
+ CG2900_MC_PORT_BT_SCO,
+ 0); /* chip doesn't care */
+ }
+
+ if (err < 0)
+ goto finished_unlock_mutex;
+
+ /* Store the stream handle (used for start and stop stream) */
+ *stream_handle = (u8)err;
+ dev_dbg(BT_DEV, "stream_handle set to %d\n", *stream_handle);
+
+ /* Now start the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, *stream_handle,
+ CG2900_BT_SESSION_START);
+ else
+ err = send_vs_stream_ctrl(audio_user, *stream_handle,
+ CG2900_MC_STREAM_START);
+ /* Let's delete and release stream.*/
+ if (err < 0) {
+ dev_dbg(BT_DEV, "Could not start a stream.");
+ (void)send_vs_delete_stream(audio_user, *stream_handle);
+ }
+
+finished_unlock_mutex:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * conn_stop_stream() - Stops an audio stream defined by @stream_handle.
+ * @audio_user: Audio user to check for.
+ * @stream_handle: Handle of the audio stream.
+ *
+ * This function is used to stop an audio stream defined by a stream
+ * handle. It does this by first stopping the stream and then
+ * resetting the session/stream.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ECOMM if no response was received.
+ * -ENOMEM upon allocation errors.
+ * Errors from @cg2900_write.
+ * -EIO for other errors.
+ */
+static int conn_stop_stream(struct audio_user *audio_user,
+ unsigned int stream_handle)
+{
+ int err = 0;
+ struct audio_info *info = audio_user->info;
+
+ dev_dbg(BT_DEV, "conn_stop_stream handle %d\n", stream_handle);
+
+ /*
+ * Use mutex to assure that only ONE command is sent at any
+ * time on each channel.
+ */
+ mutex_lock(&info->bt_mutex);
+
+ /* Now stop the stream */
+ if (info->revision == CHIP_REV_PG1)
+ err = send_vs_session_ctrl(audio_user, stream_handle,
+ CG2900_BT_SESSION_STOP);
+ else
+ err = send_vs_stream_ctrl(audio_user, stream_handle,
+ CG2900_MC_STREAM_STOP);
+ if (err)
+ goto finished_unlock_mutex;
+
+ err = send_vs_delete_stream(audio_user, stream_handle);
+
+finished_unlock_mutex:
+ dev_dbg(BT_DEV, "New resp_state: IDLE\n");
+ audio_user->resp_state = IDLE;
+ mutex_unlock(&info->bt_mutex);
+ return err;
+}
+
+/**
+ * cg2900_audio_get_devices() - Returns connected CG2900 Audio devices.
+ * @devices: Array of CG2900 Audio devices.
+ * @size: Max number of devices in array.
+ *
+ * Returns:
+ * 0 if no devices exist.
+ * > 0 is the number of devices inserted in the list.
+ * -EINVAL upon bad input parameter.
+ */
+int cg2900_audio_get_devices(struct device *devices[], __u8 size)
+{
+ struct list_head *cursor;
+ struct audio_info *tmp;
+ int i = 0;
+
+ if (!size) {
+ pr_err("No space to insert devices into list\n");
+ return 0;
+ }
+
+ if (!devices) {
+ pr_err("NULL submitted as devices array\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Go through and store the devices. If NULL is supplied for dev
+ * just return first device found.
+ */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ devices[i] = tmp->parent;
+ i++;
+ if (i == size)
+ break;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_get_devices);
+
+/**
+ * cg2900_audio_open() - Opens a session to the ST-Ericsson CG2900 Audio control interface.
+ * @session: [out] Address where to store the session identifier.
+ * Allocated by caller, must not be NULL.
+ * @parent: Parent device representing the CG2900 controller connected.
+ * If NULL is supplied the first available device is used.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCES if no info structure can be found.
+ * -EINVAL upon bad input parameter.
+ * -ENOMEM upon allocation failure.
+ * -EMFILE if no more user session could be opened.
+ * -EIO upon failure to register to CG2900.
+ * Error codes from get_info.
+ */
+int cg2900_audio_open(unsigned int *session, struct device *parent)
+{
+ int err = 0;
+ int i;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data_bt;
+ struct cg2900_user_data *pf_data_fm;
+
+ pr_debug("cg2900_audio_open");
+
+ info = get_info(parent);
+ if (!info) {
+ pr_err("No audio info exist");
+ return -EACCES;
+ } else if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ if (!session) {
+ pr_err("NULL supplied as session");
+ return -EINVAL;
+ }
+
+ mutex_lock(&info->management_mutex);
+
+ *session = 0;
+
+ /*
+ * First find a free session to use and allocate the session structure.
+ */
+ for (i = FIRST_USER;
+ i < MAX_NBR_OF_USERS && cg2900_audio_sessions[i];
+ i++)
+ ; /* Just loop until found or end reached */
+
+ if (i >= MAX_NBR_OF_USERS) {
+ pr_err("Couldn't find free user");
+ err = -EMFILE;
+ goto finished;
+ }
+
+ cg2900_audio_sessions[i] =
+ kzalloc(sizeof(*(cg2900_audio_sessions[0])), GFP_KERNEL);
+ if (!cg2900_audio_sessions[i]) {
+ pr_err("Could not allocate user");
+ err = -ENOMEM;
+ goto finished;
+ }
+ pr_debug("Found free session %d", i);
+ *session = i;
+ info->nbr_of_users_active++;
+
+ cg2900_audio_sessions[*session]->resp_state = IDLE;
+ cg2900_audio_sessions[*session]->session = *session;
+ cg2900_audio_sessions[*session]->info = info;
+
+ pf_data_bt = dev_get_platdata(info->dev_bt);
+ pf_data_fm = dev_get_platdata(info->dev_fm);
+
+ if (info->nbr_of_users_active == 1) {
+ struct cg2900_rev_data rev_data;
+
+ /*
+ * First user so register to CG2900 Core.
+ * First the BT audio device.
+ */
+ err = pf_data_bt->open(pf_data_bt);
+ if (err) {
+ dev_err(BT_DEV, "Failed to open BT audio channel\n");
+ goto error_handling;
+ }
+
+ /* Then the FM audio device */
+ err = pf_data_fm->open(pf_data_fm);
+ if (err) {
+ dev_err(FM_DEV, "Failed to open FM audio channel\n");
+ goto error_handling;
+ }
+
+ /* Read chip revision data */
+ if (!pf_data_bt->get_local_revision(pf_data_bt, &rev_data)) {
+ pr_err("Couldn't retrieve revision data");
+ err = -EIO;
+ goto error_handling;
+ }
+
+ /* Decode revision data */
+ switch (rev_data.revision) {
+ case CG2900_PG1_REV:
+ case CG2900_PG1_SPECIAL_REV:
+ info->revision = CHIP_REV_PG1;
+ break;
+
+ case CG2900_PG2_REV:
+ info->revision = CHIP_REV_PG2;
+ break;
+
+ default:
+ pr_err("Chip rev 0x%04X sub 0x%04X not supported",
+ rev_data.revision, rev_data.sub_version);
+ err = -EIO;
+ goto error_handling;
+ }
+
+ info->state = OPENED;
+ }
+
+ pr_info("Session %d opened", *session);
+
+ goto finished;
+
+error_handling:
+ if (pf_data_fm->opened)
+ pf_data_fm->close(pf_data_fm);
+ if (pf_data_bt->opened)
+ pf_data_bt->close(pf_data_bt);
+ info->nbr_of_users_active--;
+ kfree(cg2900_audio_sessions[*session]);
+ cg2900_audio_sessions[*session] = NULL;
+finished:
+ mutex_unlock(&info->management_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_open);
+
+/**
+ * cg2900_audio_close() - Closes an opened session to the ST-Ericsson CG2900 audio control interface.
+ * @session: [in_out] Pointer to session identifier to close.
+ * Will be 0 after this call.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ * -EACCES if session has not opened.
+ */
+int cg2900_audio_close(unsigned int *session)
+{
+ int err = 0;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+ struct cg2900_user_data *pf_data_bt;
+ struct cg2900_user_data *pf_data_fm;
+
+ pr_debug("cg2900_audio_close");
+
+ if (!session) {
+ pr_err("NULL pointer supplied");
+ return -EINVAL;
+ }
+
+ audio_user = get_session_user(*session);
+ if (!audio_user) {
+ pr_err("Invalid session ID");
+ return -EINVAL;
+ }
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ mutex_lock(&info->management_mutex);
+
+ pf_data_bt = dev_get_platdata(info->dev_bt);
+ pf_data_fm = dev_get_platdata(info->dev_fm);
+
+ if (!cg2900_audio_sessions[*session]) {
+ dev_err(BT_DEV, "Session %d not opened\n", *session);
+ err = -EACCES;
+ goto err_unlock_mutex;
+ }
+
+ kfree(cg2900_audio_sessions[*session]);
+ cg2900_audio_sessions[*session] = NULL;
+
+ info->nbr_of_users_active--;
+ if (info->nbr_of_users_active == 0) {
+ /* No more sessions open. Close channels */
+ pf_data_fm->close(pf_data_fm);
+ pf_data_bt->close(pf_data_bt);
+ info->state = CLOSED;
+ }
+
+ dev_info(BT_DEV, "Session %d closed\n", *session);
+
+ *session = 0;
+
+err_unlock_mutex:
+ mutex_unlock(&info->management_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_close);
+
+/**
+ * cg2900_audio_set_dai_config() - Sets the Digital Audio Interface configuration.
+ * @session: Session identifier this call is related to.
+ * @config: Pointer to the configuration to set.
+ * Allocated by caller, must not be NULL.
+ *
+ * Sets the Digital Audio Interface (DAI) configuration. The DAI is the external
+ * interface between the combo chip and the platform.
+ * For example the PCM or I2S interface.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ * -ENOMEM upon allocation failure.
+ * -EACCES if trying to set unsupported configuration.
+ * Errors from @receive_bt_cmd_complete.
+ */
+int cg2900_audio_set_dai_config(unsigned int session,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_set_dai_config session %d", session);
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ /* Different commands are used for PG1 and PG2 */
+ if (info->revision == CHIP_REV_PG1)
+ err = set_dai_config_pg1(audio_user, config);
+ else if (info->revision == CHIP_REV_PG2)
+ err = set_dai_config_pg2(audio_user, config);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_set_dai_config);
+
+/**
+ * cg2900_audio_get_dai_config() - Gets the current Digital Audio Interface configuration.
+ * @session: Session identifier this call is related to.
+ * @config: [out] Pointer to the configuration to get.
+ * Allocated by caller, must not be NULL.
+ *
+ * Gets the current Digital Audio Interface configuration. Currently this method
+ * can only be called after some one has called
+ * cg2900_audio_set_dai_config(), there is today no way of getting
+ * the static settings file parameters from this method.
+ * Note that the @port parameter within @config must be set when calling this
+ * function so that the ST-Ericsson CG2900 Audio driver will know which
+ * configuration to return.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened or configuration has not been set.
+ */
+int cg2900_audio_get_dai_config(unsigned int session,
+ struct cg2900_dai_config *config)
+{
+ int err = 0;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_get_dai_config session %d", session);
+
+ if (!config) {
+ pr_err("NULL supplied as config structure");
+ return -EINVAL;
+ }
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ /*
+ * Return DAI configuration based on the received port.
+ * If port has not been configured return error.
+ */
+ switch (config->port) {
+ case PORT_0_I2S:
+ mutex_lock(&info->management_mutex);
+ if (info->i2s_config_known)
+ memcpy(&config->conf.i2s,
+ &info->i2s_config,
+ sizeof(config->conf.i2s));
+ else
+ err = -EIO;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ case PORT_1_I2S_PCM:
+ mutex_lock(&info->management_mutex);
+ if (info->i2s_pcm_config_known)
+ memcpy(&config->conf.i2s_pcm,
+ &info->i2s_pcm_config,
+ sizeof(config->conf.i2s_pcm));
+ else
+ err = -EIO;
+ mutex_unlock(&info->management_mutex);
+ break;
+
+ default:
+ dev_err(BT_DEV, "Unknown port configuration %d\n",
+ config->port);
+ err = -EIO;
+ break;
+ };
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_get_dai_config);
+
+/**
+ * cg2900_audio_config_endpoint() - Configures one endpoint in the combo chip's audio system.
+ * @session: Session identifier this call is related to.
+ * @config: Pointer to the endpoint's configuration structure.
+ *
+ * Configures one endpoint in the combo chip's audio system.
+ * Supported @endpoint_id values are:
+ * * ENDPOINT_BT_SCO_INOUT
+ * * ENDPOINT_BT_A2DP_SRC
+ * * ENDPOINT_FM_RX
+ * * ENDPOINT_FM_TX
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ * -EACCES if supplied cg2900_dai_config struct contains not supported
+ * endpoint_id.
+ */
+int cg2900_audio_config_endpoint(unsigned int session,
+ struct cg2900_endpoint_config *config)
+{
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_config_endpoint\n");
+
+ if (!config) {
+ pr_err("NULL supplied as configuration structure");
+ return -EINVAL;
+ }
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ switch (config->endpoint_id) {
+ case ENDPOINT_BT_SCO_INOUT:
+ case ENDPOINT_BT_A2DP_SRC:
+ case ENDPOINT_FM_RX:
+ case ENDPOINT_FM_TX:
+ add_endpoint(config, &info->endpoints);
+ break;
+
+ case ENDPOINT_PORT_0_I2S:
+ case ENDPOINT_PORT_1_I2S_PCM:
+ case ENDPOINT_SLIMBUS_VOICE:
+ case ENDPOINT_SLIMBUS_AUDIO:
+ case ENDPOINT_BT_A2DP_SNK:
+ case ENDPOINT_ANALOG_OUT:
+ case ENDPOINT_DSP_AUDIO_IN:
+ case ENDPOINT_DSP_AUDIO_OUT:
+ case ENDPOINT_DSP_VOICE_IN:
+ case ENDPOINT_DSP_VOICE_OUT:
+ case ENDPOINT_DSP_TONE_IN:
+ case ENDPOINT_BURST_BUFFER_IN:
+ case ENDPOINT_BURST_BUFFER_OUT:
+ case ENDPOINT_MUSIC_DECODER:
+ case ENDPOINT_HCI_AUDIO_IN:
+ default:
+ dev_err(BT_DEV, "Unsupported endpoint_id %d\n",
+ config->endpoint_id);
+ return -EACCES;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_config_endpoint);
+
+static bool is_dai_port(enum cg2900_audio_endpoint_id ep)
+{
+ /* These are the only supported ones */
+ return (ep == ENDPOINT_PORT_0_I2S) || (ep == ENDPOINT_PORT_1_I2S_PCM);
+}
+
+/**
+ * cg2900_audio_start_stream() - Connects two endpoints and starts the audio stream.
+ * @session: Session identifier this call is related to.
+ * @ep_1: One of the endpoints, no relation to direction or role.
+ * @ep_2: The other endpoint, no relation to direction or role.
+ * @stream_handle: Pointer where to store the stream handle.
+ * Allocated by caller, must not be NULL.
+ *
+ * Connects two endpoints and starts the audio stream.
+ * Note that the endpoints need to be configured before the stream is started;
+ * DAI endpoints, such as ENDPOINT_PORT_0_I2S, are
+ * configured through @cg2900_audio_set_dai_config() while other
+ * endpoints are configured through @cg2900_audio_config_endpoint().
+ *
+ * Supported @endpoint_id values are:
+ * * ENDPOINT_PORT_0_I2S
+ * * ENDPOINT_PORT_1_I2S_PCM
+ * * ENDPOINT_BT_SCO_INOUT
+ * * ENDPOINT_FM_RX
+ * * ENDPOINT_FM_TX
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter or unsupported configuration.
+ * -EIO if driver has not been opened.
+ * Errors from @conn_start_i2s_to_fm_rx, @conn_start_i2s_to_fm_tx, and
+ * @conn_start_pcm_to_sco.
+ */
+int cg2900_audio_start_stream(unsigned int session,
+ enum cg2900_audio_endpoint_id ep_1,
+ enum cg2900_audio_endpoint_id ep_2,
+ unsigned int *stream_handle)
+{
+ int err;
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_start_stream session %d ep_1 %d ep_2 %d",
+ session, ep_1, ep_2);
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ /* Put digital interface in ep_1 to simplify comparison below */
+ if (!is_dai_port(ep_1)) {
+ /* Swap endpoints */
+ enum cg2900_audio_endpoint_id t = ep_1;
+ ep_1 = ep_2;
+ ep_2 = t;
+ }
+
+ if (ep_1 == ENDPOINT_PORT_1_I2S_PCM && ep_2 == ENDPOINT_BT_SCO_INOUT) {
+ err = conn_start_pcm_to_sco(audio_user, stream_handle);
+ } else if (ep_1 == ENDPOINT_PORT_0_I2S && ep_2 == ENDPOINT_FM_RX) {
+ err = conn_start_i2s_to_fm_rx(audio_user, stream_handle);
+ } else if (ep_1 == ENDPOINT_PORT_0_I2S && ep_2 == ENDPOINT_FM_TX) {
+ err = conn_start_i2s_to_fm_tx(audio_user, stream_handle);
+ } else {
+ dev_err(BT_DEV, "Endpoint config not handled: ep1: %d, "
+ "ep2: %d\n", ep_1, ep_2);
+ err = -EINVAL;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_start_stream);
+
+/**
+ * cg2900_audio_stop_stream() - Stops a stream and disconnects the endpoints.
+ * @session: Session identifier this call is related to.
+ * @stream_handle: Handle to the stream to stop.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL upon bad input parameter.
+ * -EIO if driver has not been opened.
+ */
+int cg2900_audio_stop_stream(unsigned int session, unsigned int stream_handle)
+{
+ struct audio_user *audio_user;
+ struct audio_info *info;
+
+ pr_debug("cg2900_audio_stop_stream handle %d", stream_handle);
+
+ audio_user = get_session_user(session);
+ if (!audio_user)
+ return -EINVAL;
+
+ info = audio_user->info;
+
+ if (info->state != OPENED) {
+ dev_err(BT_DEV, "Audio driver not open\n");
+ return -EIO;
+ }
+
+ return conn_stop_stream(audio_user, stream_handle);
+}
+EXPORT_SYMBOL_GPL(cg2900_audio_stop_stream);
+
+/**
+ * audio_dev_open() - Open char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation failed.
+ * Errors from @cg2900_audio_open.
+ */
+static int audio_dev_open(struct inode *inode, struct file *filp)
+{
+ int err;
+ struct char_dev_info *char_dev_info;
+ int minor;
+ struct audio_info *info = NULL;
+ struct audio_info *tmp;
+ struct list_head *cursor;
+
+ pr_debug("audio_dev_open");
+
+ minor = iminor(inode);
+
+ /* Find the info struct for this file */
+ list_for_each(cursor, &cg2900_audio_devices) {
+ tmp = list_entry(cursor, struct audio_info, list);
+ if (tmp->misc_dev.minor == minor) {
+ info = tmp;
+ break;
+ }
+ }
+ if (!info) {
+ pr_err("Could not identify device in inode");
+ return -EINVAL;
+ }
+
+ /*
+ * Allocate the char dev info structure. It will be stored inside
+ * the file pointer and supplied when file_ops are called.
+ * It's free'd in audio_dev_release.
+ */
+ char_dev_info = kzalloc(sizeof(*char_dev_info), GFP_KERNEL);
+ if (!char_dev_info) {
+ dev_err(BT_DEV, "Couldn't allocate char_dev_info\n");
+ return -ENOMEM;
+ }
+ filp->private_data = char_dev_info;
+ char_dev_info->info = info;
+
+ mutex_init(&char_dev_info->management_mutex);
+ mutex_init(&char_dev_info->rw_mutex);
+ skb_queue_head_init(&char_dev_info->rx_queue);
+
+ mutex_lock(&char_dev_info->management_mutex);
+ err = cg2900_audio_open(&char_dev_info->session, info->dev_bt->parent);
+ mutex_unlock(&char_dev_info->management_mutex);
+ if (err) {
+ dev_err(BT_DEV, "Failed to open CG2900 Audio driver (%d)\n",
+ err);
+ goto error_handling_free_mem;
+ }
+
+ return 0;
+
+error_handling_free_mem:
+ kfree(char_dev_info);
+ filp->private_data = NULL;
+ return err;
+}
+
+/**
+ * audio_dev_release() - Release char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EBADF if NULL pointer was supplied in private data.
+ * Errors from @cg2900_audio_close.
+ */
+static int audio_dev_release(struct inode *inode, struct file *filp)
+{
+ int err = 0;
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info = dev->info;
+
+ dev_dbg(BT_DEV, "audio_dev_release\n");
+
+ mutex_lock(&dev->management_mutex);
+ err = cg2900_audio_close(&dev->session);
+ if (err)
+ /*
+ * Just print the error. Still free the char_dev_info since we
+ * don't know the filp structure is valid after this call
+ */
+ dev_err(BT_DEV, "Error %d when closing CG2900 audio driver\n",
+ err);
+
+ mutex_unlock(&dev->management_mutex);
+
+ kfree(dev);
+ filp->private_data = NULL;
+
+ return err;
+}
+
+/**
+ * audio_dev_read() - Return information to the user from last @write call.
+ * @filp: Pointer to the file struct.
+ * @buf: Received buffer.
+ * @count: Size of buffer.
+ * @f_pos: Position in buffer.
+ *
+ * The audio_dev_read() function returns information from
+ * the last @write call to same char device.
+ * The data is in the following format:
+ * * OpCode of command for this data
+ * * Data content (Length of data is determined by the command OpCode, i.e.
+ * fixed for each command)
+ *
+ * Returns:
+ * Bytes successfully read (could be 0).
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_to_user fails.
+ * -ENOMEM upon allocation failure.
+ */
+static ssize_t audio_dev_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info = dev->info;
+ unsigned int bytes_to_copy;
+ int err = 0;
+ struct sk_buff *skb;
+
+ dev_dbg(BT_DEV, "audio_dev_read count %d\n", count);
+
+ mutex_lock(&dev->rw_mutex);
+
+ skb = skb_dequeue(&dev->rx_queue);
+ if (!skb) {
+ /* No data to read */
+ bytes_to_copy = 0;
+ goto finished;
+ }
+
+ bytes_to_copy = min(count, (unsigned int)(skb->len));
+
+ err = copy_to_user(buf, skb->data, bytes_to_copy);
+ if (err) {
+ dev_err(BT_DEV, "copy_to_user error %d\n", err);
+ skb_queue_head(&dev->rx_queue, skb);
+ err = -EFAULT;
+ goto error_handling;
+ }
+
+ skb_pull(skb, bytes_to_copy);
+
+ if (skb->len > 0)
+ skb_queue_head(&dev->rx_queue, skb);
+ else
+ kfree_skb(skb);
+
+ goto finished;
+
+error_handling:
+ mutex_unlock(&dev->rw_mutex);
+ return (ssize_t)err;
+finished:
+ mutex_unlock(&dev->rw_mutex);
+ return bytes_to_copy;
+}
+
+/**
+ * audio_dev_write() - Call CG2900 Audio API function.
+ * @filp: Pointer to the file struct.
+ * @buf: Write buffer.
+ * @count: Size of the buffer write.
+ * @f_pos: Position of buffer.
+ *
+ * audio_dev_write() function executes supplied data and
+ * interprets it as if it was a function call to the CG2900 Audio API.
+ * The data is according to:
+ * * OpCode (4 bytes, see API).
+ * * Data according to OpCode (see API). No padding between parameters.
+ *
+ * Returns:
+ * Bytes successfully written (could be 0). Equals input @count if successful.
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_from_user fails.
+ * Error codes from all CG2900 Audio API functions.
+ */
+static ssize_t audio_dev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ u8 *rec_data;
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info;
+ int err = 0;
+ int op_code = 0;
+ u8 *curr_data;
+ unsigned int stream_handle;
+ struct cg2900_dai_config dai_config;
+ struct cg2900_endpoint_config ep_config;
+ enum cg2900_audio_endpoint_id ep_1;
+ enum cg2900_audio_endpoint_id ep_2;
+ int bytes_left = count;
+
+ pr_debug("audio_dev_write count %d", count);
+
+ if (!dev) {
+ pr_err("No dev supplied in private data");
+ return -EBADF;
+ }
+ info = dev->info;
+
+ rec_data = kmalloc(count, GFP_KERNEL);
+ if (!rec_data) {
+ dev_err(BT_DEV, "kmalloc failed (%d bytes)\n", count);
+ return -ENOMEM;
+ }
+
+ mutex_lock(&dev->rw_mutex);
+
+ err = copy_from_user(rec_data, buf, count);
+ if (err) {
+ dev_err(BT_DEV, "copy_from_user failed (%d)\n", err);
+ err = -EFAULT;
+ goto finished_mutex_unlock;
+ }
+
+ /* Initialize temporary data pointer used to traverse the packet */
+ curr_data = rec_data;
+
+ op_code = curr_data[0];
+ /* OpCode is int size to keep data int aligned */
+ curr_data += sizeof(unsigned int);
+ bytes_left -= sizeof(unsigned int);
+
+ switch (op_code) {
+ case CG2900_OPCODE_SET_DAI_CONF:
+ if (bytes_left < sizeof(dai_config)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_SET_DAI_CONF\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&dai_config, curr_data, sizeof(dai_config));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_SET_DAI_CONF port %d\n",
+ dai_config.port);
+ err = cg2900_audio_set_dai_config(dev->session, &dai_config);
+ break;
+
+ case CG2900_OPCODE_GET_DAI_CONF:
+ if (bytes_left < sizeof(dai_config)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_GET_DAI_CONF\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ /*
+ * Only need to copy the port really, but let's copy
+ * like this for simplicity. It's only test functionality
+ * after all.
+ */
+ memcpy(&dai_config, curr_data, sizeof(dai_config));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_GET_DAI_CONF port %d\n",
+ dai_config.port);
+ err = cg2900_audio_get_dai_config(dev->session, &dai_config);
+ if (!err) {
+ int len;
+ struct sk_buff *skb;
+
+ /*
+ * Command succeeded. Store data so it can be returned
+ * when calling read.
+ */
+ len = sizeof(op_code) + sizeof(dai_config);
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "CG2900_OPCODE_GET_DAI_CONF: "
+ "Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_mutex_unlock;
+ }
+ memcpy(skb_put(skb, sizeof(op_code)), &op_code,
+ sizeof(op_code));
+ memcpy(skb_put(skb, sizeof(dai_config)),
+ &dai_config, sizeof(dai_config));
+ skb_queue_tail(&dev->rx_queue, skb);
+ }
+ break;
+
+ case CG2900_OPCODE_CONFIGURE_ENDPOINT:
+ if (bytes_left < sizeof(ep_config)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_CONFIGURE_ENDPOINT\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&ep_config, curr_data, sizeof(ep_config));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_CONFIGURE_ENDPOINT ep_id %d\n",
+ ep_config.endpoint_id);
+ err = cg2900_audio_config_endpoint(dev->session, &ep_config);
+ break;
+
+ case CG2900_OPCODE_START_STREAM:
+ if (bytes_left < (sizeof(ep_1) + sizeof(ep_2))) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_START_STREAM\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&ep_1, curr_data, sizeof(ep_1));
+ curr_data += sizeof(ep_1);
+ memcpy(&ep_2, curr_data, sizeof(ep_2));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_START_STREAM ep_1 %d ep_2 %d\n",
+ ep_1, ep_2);
+
+ err = cg2900_audio_start_stream(dev->session,
+ ep_1, ep_2, &stream_handle);
+ if (!err) {
+ int len;
+ struct sk_buff *skb;
+
+ /*
+ * Command succeeded. Store data so it can be returned
+ * when calling read.
+ */
+ len = sizeof(op_code) + sizeof(stream_handle);
+ skb = alloc_skb(len, GFP_KERNEL);
+ if (!skb) {
+ dev_err(BT_DEV, "CG2900_OPCODE_START_STREAM: "
+ "Could not allocate skb\n");
+ err = -ENOMEM;
+ goto finished_mutex_unlock;
+ }
+ memcpy(skb_put(skb, sizeof(op_code)), &op_code,
+ sizeof(op_code));
+ memcpy(skb_put(skb, sizeof(stream_handle)),
+ &stream_handle, sizeof(stream_handle));
+ skb_queue_tail(&dev->rx_queue, skb);
+
+ dev_dbg(BT_DEV, "stream_handle %d\n", stream_handle);
+ }
+ break;
+
+ case CG2900_OPCODE_STOP_STREAM:
+ if (bytes_left < sizeof(stream_handle)) {
+ dev_err(BT_DEV, "Not enough data supplied for "
+ "CG2900_OPCODE_STOP_STREAM\n");
+ err = -EINVAL;
+ goto finished_mutex_unlock;
+ }
+ memcpy(&stream_handle, curr_data, sizeof(stream_handle));
+ dev_dbg(BT_DEV, "CG2900_OPCODE_STOP_STREAM stream_handle %d\n",
+ stream_handle);
+ err = cg2900_audio_stop_stream(dev->session, stream_handle);
+ break;
+
+ default:
+ dev_err(BT_DEV, "Received bad op_code %d\n", op_code);
+ break;
+ };
+
+finished_mutex_unlock:
+ kfree(rec_data);
+ mutex_unlock(&dev->rw_mutex);
+
+ if (err)
+ return err;
+ else
+ return count;
+}
+
+/**
+ * audio_dev_poll() - Handle POLL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @wait: Poll table supplied to caller.
+ *
+ * This function is used by the User Space application to see if the device is
+ * still open and if there is any data available for reading.
+ *
+ * Returns:
+ * Mask of current set POLL values.
+ */
+static unsigned int audio_dev_poll(struct file *filp, poll_table *wait)
+{
+ struct char_dev_info *dev = filp->private_data;
+ struct audio_info *info;
+ unsigned int mask = 0;
+
+ if (!dev) {
+ pr_err("No dev supplied in private data");
+ return POLLERR | POLLRDHUP;
+ }
+ info = dev->info;
+
+ if (RESET == info->state)
+ mask |= POLLERR | POLLRDHUP | POLLPRI;
+ else
+ /* Unless RESET we can transmit */
+ mask |= POLLOUT;
+
+ if (!skb_queue_empty(&dev->rx_queue))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static const struct file_operations char_dev_fops = {
+ .open = audio_dev_open,
+ .release = audio_dev_release,
+ .read = audio_dev_read,
+ .write = audio_dev_write,
+ .poll = audio_dev_poll
+};
+
+/**
+ * probe_common() - Register misc device.
+ * @info: Audio info structure.
+ * @dev: Current device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * Error codes from misc_register.
+ */
+static int probe_common(struct audio_info *info, struct device *dev)
+{
+ struct audio_cb_info *cb_info;
+ struct cg2900_user_data *pf_data;
+ int err;
+
+ cb_info = kzalloc(sizeof(*cb_info), GFP_KERNEL);
+ if (!cb_info) {
+ dev_err(dev, "Failed to allocate cb_info\n");
+ return -ENOMEM;
+ }
+ init_waitqueue_head(&cb_info->wq);
+ skb_queue_head_init(&cb_info->skb_queue);
+
+ pf_data = dev_get_platdata(dev);
+ cg2900_set_usr(pf_data, cb_info);
+ pf_data->dev = dev;
+ pf_data->read_cb = read_cb;
+ pf_data->reset_cb = reset_cb;
+
+ /* Only register misc device when both devices (BT and FM) are probed */
+ if (!info->dev_bt || !info->dev_fm)
+ return 0;
+
+ /* Prepare and register MISC device */
+ info->misc_dev.minor = MISC_DYNAMIC_MINOR;
+ info->misc_dev.name = NAME;
+ info->misc_dev.fops = &char_dev_fops;
+ info->misc_dev.parent = dev;
+ info->misc_dev.mode = S_IRUGO | S_IWUGO;
+
+ err = misc_register(&info->misc_dev);
+ if (err) {
+ dev_err(dev, "Error %d registering misc dev\n", err);
+ return err;
+ }
+ info->misc_registered = true;
+
+ dev_info(dev, "CG2900 Audio driver started\n");
+ return 0;
+}
+
+/**
+ * cg2900_audio_bt_probe() - Initialize CG2900 BT audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * -EEXIST if device has already been started.
+ * Error codes from probe_common.
+ */
+static int __devinit cg2900_audio_bt_probe(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_bt_probe\n");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->dev_bt = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, info);
+
+ err = probe_common(info, &pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not probe audio BT (%d)\n", err);
+ dev_set_drvdata(&pdev->dev, NULL);
+ device_removed(info);
+ }
+
+ return err;
+}
+
+/**
+ * cg2900_audio_bt_probe() - Initialize CG2900 FM audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -ENOMEM if allocation fails.
+ * -EEXIST if device has already been started.
+ * Error codes from probe_common.
+ */
+static int __devinit cg2900_audio_fm_probe(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_fm_probe\n");
+
+ info = get_info(&pdev->dev);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ info->dev_fm = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, info);
+
+ err = probe_common(info, &pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "Could not probe audio FM (%d)\n", err);
+ dev_set_drvdata(&pdev->dev, NULL);
+ device_removed(info);
+ }
+
+ return err;
+}
+
+/**
+ * common_remove() - Dergister misc device.
+ * @info: Audio info structure.
+ * @dev: Current device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes from misc_deregister.
+ */
+static int common_remove(struct audio_info *info, struct device *dev)
+{
+ int err;
+ struct audio_cb_info *cb_info;
+ struct cg2900_user_data *pf_data;
+
+ pf_data = dev_get_platdata(dev);
+ cb_info = cg2900_get_usr(pf_data);
+ skb_queue_purge(&cb_info->skb_queue);
+ wake_up_all(&cb_info->wq);
+ kfree(cb_info);
+
+ if (!info->misc_registered)
+ return 0;
+
+ err = misc_deregister(&info->misc_dev);
+ if (err)
+ dev_err(dev, "Error %d deregistering misc dev\n", err);
+ info->misc_registered = false;
+
+ dev_info(dev, "CG2900 Audio driver removed\n");
+ return err;
+}
+
+/**
+ * cg2900_audio_bt_remove() - Release CG2900 audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes from common_remove.
+ */
+static int __devexit cg2900_audio_bt_remove(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_bt_remove\n");
+
+ info = dev_get_drvdata(&pdev->dev);
+
+ info->dev_bt = NULL;
+
+ err = common_remove(info, &pdev->dev);
+ if (err)
+ dev_err(&pdev->dev,
+ "cg2900_audio_bt_remove:common_remove failed\n");
+
+ device_removed(info);
+
+ return 0;
+}
+
+/**
+ * cg2900_audio_fm_remove() - Release CG2900 audio resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * Error codes from common_remove.
+ */
+static int __devexit cg2900_audio_fm_remove(struct platform_device *pdev)
+{
+ int err;
+ struct audio_info *info;
+
+ dev_dbg(&pdev->dev, "cg2900_audio_fm_remove\n");
+
+ info = dev_get_drvdata(&pdev->dev);
+
+ info->dev_fm = NULL;
+
+ err = common_remove(info, &pdev->dev);
+ if (err)
+ dev_err(&pdev->dev,
+ "cg2900_audio_fm_remove:common_remove failed\n");
+
+ device_removed(info);
+
+ return 0;
+}
+
+static struct platform_driver cg2900_audio_bt_driver = {
+ .driver = {
+ .name = "cg2900-audiobt",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_audio_bt_probe,
+ .remove = __devexit_p(cg2900_audio_bt_remove),
+};
+
+static struct platform_driver cg2900_audio_fm_driver = {
+ .driver = {
+ .name = "cg2900-audiofm",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_audio_fm_probe,
+ .remove = __devexit_p(cg2900_audio_fm_remove),
+};
+
+/**
+ * cg2900_audio_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_audio_init(void)
+{
+ int err;
+
+ pr_debug("cg2900_audio_init");
+
+ err = platform_driver_register(&cg2900_audio_bt_driver);
+ if (err)
+ return err;
+ return platform_driver_register(&cg2900_audio_fm_driver);
+}
+
+/**
+ * cg2900_audio_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_audio_exit(void)
+{
+ pr_debug("cg2900_audio_exit");
+ platform_driver_unregister(&cg2900_audio_fm_driver);
+ platform_driver_unregister(&cg2900_audio_bt_driver);
+}
+
+module_init(cg2900_audio_init);
+module_exit(cg2900_audio_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_AUTHOR("Kjell Andersson ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth Audio ST-Ericsson controller");
diff --git a/drivers/staging/cg2900/mfd/cg2900_char_devices.c b/drivers/staging/cg2900/mfd/cg2900_char_devices.c
new file mode 100644
index 0000000..1277dec
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_char_devices.c
@@ -0,0 +1,707 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson connectivity controller.
+ */
+#define NAME "cg2900_char_dev"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/mfd/core.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+
+#define MAIN_DEV (dev->dev)
+
+/**
+ * struct char_dev_user - Stores device information.
+ * @dev: Current device.
+ * @miscdev: Registered device struct.
+ * @name: Name of device.
+ * @rx_queue: Data queue.
+ * @rx_wait_queue: Wait queue.
+ * @reset_wait_queue: Reset Wait queue.
+ * @read_mutex: Read mutex.
+ * @write_mutex: Write mutex.
+ * @list: List header for inserting into device list.
+ */
+struct char_dev_user {
+ struct device *dev;
+ struct miscdevice miscdev;
+ char *name;
+ struct sk_buff_head rx_queue;
+ wait_queue_head_t rx_wait_queue;
+ wait_queue_head_t reset_wait_queue;
+ struct mutex read_mutex;
+ struct mutex write_mutex;
+ struct list_head list;
+};
+
+/**
+ * struct char_info - Stores all current users.
+ * @open_mutex: Open mutex (used for both open and release).
+ * @man_mutex: Management mutex.
+ * @dev_users: List of char dev users.
+ */
+struct char_info {
+ struct mutex open_mutex;
+ struct mutex man_mutex;
+ struct list_head dev_users;
+};
+
+static struct char_info *char_info;
+
+/**
+ * char_dev_read_cb() - Handle data received from controller.
+ * @dev: Device receiving data.
+ * @skb: Buffer with data coming from controller.
+ *
+ * The char_dev_read_cb() function handles data received from the CG2900 driver.
+ */
+static void char_dev_read_cb(struct cg2900_user_data *dev, struct sk_buff *skb)
+{
+ struct char_dev_user *char_dev = dev_get_drvdata(dev->dev);
+
+ dev_dbg(dev->dev, "char_dev_read_cb len %d\n", skb->len);
+
+ skb_queue_tail(&char_dev->rx_queue, skb);
+
+ wake_up_interruptible(&char_dev->rx_wait_queue);
+}
+
+/**
+ * char_dev_reset_cb() - Handle reset from controller.
+ * @dev: Device resetting.
+ *
+ * The char_dev_reset_cb() function handles reset from the CG2900 driver.
+ */
+static void char_dev_reset_cb(struct cg2900_user_data *dev)
+{
+ struct char_dev_user *char_dev = dev_get_drvdata(dev->dev);
+
+ dev_dbg(dev->dev, "char_dev_reset_cb\n");
+
+ wake_up_interruptible(&char_dev->rx_wait_queue);
+ wake_up_interruptible(&char_dev->reset_wait_queue);
+}
+
+/**
+ * char_dev_open() - Open char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * The char_dev_open() function opens the char device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if device cannot be found in device list.
+ * Error codes from cg2900->open.
+ */
+static int char_dev_open(struct inode *inode, struct file *filp)
+{
+ int err;
+ int minor;
+ struct char_dev_user *dev = NULL;
+ struct char_dev_user *tmp;
+ struct list_head *cursor;
+ struct cg2900_user_data *user;
+
+ mutex_lock(&char_info->open_mutex);
+
+ minor = iminor(inode);
+
+ /* Find the device for this file */
+ mutex_lock(&char_info->man_mutex);
+ list_for_each(cursor, &char_info->dev_users) {
+ tmp = list_entry(cursor, struct char_dev_user, list);
+ if (tmp->miscdev.minor == minor) {
+ dev = tmp;
+ break;
+ }
+ }
+ mutex_unlock(&char_info->man_mutex);
+ if (!dev) {
+ pr_err("Could not identify device in inode");
+ err = -EINVAL;
+ goto error_handling;
+ }
+
+ filp->private_data = dev;
+ user = dev_get_platdata(dev->dev);
+
+ /* First initiate wait queues for this device. */
+ init_waitqueue_head(&dev->rx_wait_queue);
+ init_waitqueue_head(&dev->reset_wait_queue);
+
+ /* Register to CG2900 Driver */
+ err = user->open(user);
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Couldn't register to CG2900 for H:4 channel %s\n",
+ dev->name);
+ goto error_handling;
+ }
+ dev_info(MAIN_DEV, "char_dev %s opened\n", dev->name);
+
+error_handling:
+ mutex_unlock(&char_info->open_mutex);
+ return err;
+}
+
+/**
+ * char_dev_release() - Release char device.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * The char_dev_release() function release the char device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EBADF if NULL pointer was supplied in private data.
+ */
+static int char_dev_release(struct inode *inode, struct file *filp)
+{
+ int err = 0;
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+
+ pr_debug("char_dev_release");
+
+ if (!dev) {
+ pr_err("Calling with NULL pointer");
+ return -EBADF;
+ }
+
+ mutex_lock(&char_info->open_mutex);
+ mutex_lock(&dev->read_mutex);
+ mutex_lock(&dev->write_mutex);
+
+ user = dev_get_platdata(dev->dev);
+ if (user->opened)
+ user->close(user);
+
+ dev_info(MAIN_DEV, "char_dev %s closed\n", dev->name);
+
+ filp->private_data = NULL;
+ wake_up_interruptible(&dev->rx_wait_queue);
+ wake_up_interruptible(&dev->reset_wait_queue);
+
+ mutex_unlock(&dev->write_mutex);
+ mutex_unlock(&dev->read_mutex);
+ mutex_unlock(&char_info->open_mutex);
+
+ return err;
+}
+
+/**
+ * char_dev_read() - Queue and copy buffer to user.
+ * @filp: Pointer to the file struct.
+ * @buf: Received buffer.
+ * @count: Size of buffer.
+ * @f_pos: Position in buffer.
+ *
+ * The char_dev_read() function queues and copy the received buffer to
+ * the user space char device. If no data is available this function will block.
+ *
+ * Returns:
+ * Bytes successfully read (could be 0).
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_to_user fails.
+ * Error codes from wait_event_interruptible.
+ */
+static ssize_t char_dev_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *f_pos)
+{
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ struct sk_buff *skb;
+ int bytes_to_copy;
+ int err = 0;
+
+ pr_debug("char_dev_read");
+
+ if (!dev) {
+ pr_err("Calling with NULL pointer");
+ return -EBADF;
+ }
+ mutex_lock(&dev->read_mutex);
+
+ user = dev_get_platdata(dev->dev);
+
+ if (user->opened && skb_queue_empty(&dev->rx_queue)) {
+ err = wait_event_interruptible(dev->rx_wait_queue,
+ (!(skb_queue_empty(&dev->rx_queue))) ||
+ !user->opened);
+ if (err) {
+ dev_err(MAIN_DEV, "Failed to wait for event\n");
+ goto error_handling;
+ }
+ }
+
+ if (!user->opened) {
+ dev_err(MAIN_DEV, "Channel has been closed\n");
+ err = -EBADF;
+ goto error_handling;
+ }
+
+ skb = skb_dequeue(&dev->rx_queue);
+ if (!skb) {
+ dev_dbg(MAIN_DEV,
+ "skb queue is empty - return with zero bytes\n");
+ bytes_to_copy = 0;
+ goto finished;
+ }
+
+ bytes_to_copy = min(count, skb->len);
+
+ err = copy_to_user(buf, skb->data, bytes_to_copy);
+ if (err) {
+ dev_err(MAIN_DEV, "Error %d from copy_to_user\n", err);
+ skb_queue_head(&dev->rx_queue, skb);
+ err = -EFAULT;
+ goto error_handling;
+ }
+
+ skb_pull(skb, bytes_to_copy);
+
+ if (skb->len > 0)
+ skb_queue_head(&dev->rx_queue, skb);
+ else
+ kfree_skb(skb);
+
+ goto finished;
+
+error_handling:
+ mutex_unlock(&dev->read_mutex);
+ return (ssize_t)err;
+finished:
+ mutex_unlock(&dev->read_mutex);
+ return bytes_to_copy;
+}
+
+/**
+ * char_dev_write() - Copy buffer from user and write to CG2900 driver.
+ * @filp: Pointer to the file struct.
+ * @buf: Write buffer.
+ * @count: Size of the buffer write.
+ * @f_pos: Position of buffer.
+ *
+ * Returns:
+ * Bytes successfully written (could be 0).
+ * -EBADF if NULL pointer was supplied in private data.
+ * -EFAULT if copy_from_user fails.
+ */
+static ssize_t char_dev_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct sk_buff *skb;
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ int err = 0;
+
+ pr_debug("char_dev_write");
+
+ if (!dev) {
+ pr_err("Calling with NULL pointer");
+ return -EBADF;
+ }
+
+ user = dev_get_platdata(dev->dev);
+ if (!user->opened) {
+ dev_err(MAIN_DEV, "char_dev_write: Channel not opened\n");
+ return -EACCES;
+ }
+
+ mutex_lock(&dev->write_mutex);
+
+ skb = user->alloc_skb(count, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(MAIN_DEV, "Couldn't allocate sk_buff with length %d\n",
+ count);
+ goto error_handling;
+ }
+
+ err = copy_from_user(skb_put(skb, count), buf, count);
+ if (err) {
+ dev_err(MAIN_DEV, "Error %d from copy_from_user\n", err);
+ kfree_skb(skb);
+ err = -EFAULT;
+ goto error_handling;
+ }
+
+ err = user->write(user, skb);
+ if (err) {
+ dev_err(MAIN_DEV, "cg2900_write failed (%d)\n", err);
+ kfree_skb(skb);
+ goto error_handling;
+ }
+
+ mutex_unlock(&dev->write_mutex);
+ return count;
+
+error_handling:
+ mutex_unlock(&dev->write_mutex);
+ return err;
+}
+
+/**
+ * char_dev_unlocked_ioctl() - Handle IOCTL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @cmd: IOCTL command.
+ * @arg: IOCTL argument.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if supplied cmd is not supported.
+ * For cmd CG2900_CHAR_DEV_IOCTL_CHECK4RESET 0x01 is returned if device is
+ * reset and 0x02 is returned if device is closed.
+ */
+static long char_dev_unlocked_ioctl(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ struct cg2900_rev_data rev_data;
+ int err = 0;
+ int ret_val;
+ void __user *user_arg = (void __user *)arg;
+
+ dev_dbg(dev->dev, "char_dev_unlocked_ioctl for %s\n"
+ "\tDIR: %d\n"
+ "\tTYPE: %d\n"
+ "\tNR: %d\n"
+ "\tSIZE: %d",
+ dev->name, _IOC_DIR(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd),
+ _IOC_SIZE(cmd));
+
+ user = dev_get_platdata(dev->dev);
+
+ switch (cmd) {
+ case CG2900_CHAR_DEV_IOCTL_RESET:
+ if (!user->opened)
+ return -EACCES;
+ dev_dbg(MAIN_DEV, "ioctl reset command for device %s\n",
+ dev->name);
+ err = user->reset(user);
+ break;
+
+ case CG2900_CHAR_DEV_IOCTL_CHECK4RESET:
+ if (user->opened)
+ ret_val = CG2900_CHAR_DEV_IOCTL_EVENT_IDLE;
+ else
+ ret_val = CG2900_CHAR_DEV_IOCTL_EVENT_RESET;
+
+ dev_dbg(MAIN_DEV, "ioctl check for reset command for device %s",
+ dev->name);
+
+ err = copy_to_user(user_arg, &ret_val, sizeof(ret_val));
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Error %d from copy_to_user for reset\n", err);
+ return -EFAULT;
+ }
+ break;
+
+ case CG2900_CHAR_DEV_IOCTL_GET_REVISION:
+ if (!user->get_local_revision(user, &rev_data)) {
+ dev_err(MAIN_DEV, "No revision data available\n");
+ return -EIO;
+ }
+ dev_dbg(MAIN_DEV, "ioctl check for local revision info\n"
+ "\trevision 0x%04X\n"
+ "\tsub_version 0x%04X\n",
+ rev_data.revision, rev_data.sub_version);
+ err = copy_to_user(user_arg, &rev_data, sizeof(rev_data));
+ if (err) {
+ dev_err(MAIN_DEV,
+ "Error %d from copy_to_user for "
+ "revision\n", err);
+ return -EFAULT;
+ }
+ break;
+
+ default:
+ dev_err(MAIN_DEV, "Unknown ioctl command %08X\n", cmd);
+ err = -EINVAL;
+ break;
+ };
+
+ return err;
+}
+
+/**
+ * char_dev_poll() - Handle POLL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @wait: Poll table supplied to caller.
+ *
+ * Returns:
+ * Mask of current set POLL values
+ */
+static unsigned int char_dev_poll(struct file *filp, poll_table *wait)
+{
+ struct char_dev_user *dev = filp->private_data;
+ struct cg2900_user_data *user;
+ unsigned int mask = 0;
+
+ if (!dev) {
+ pr_debug("Device not open");
+ return POLLERR | POLLRDHUP;
+ }
+
+ user = dev_get_platdata(dev->dev);
+
+ poll_wait(filp, &dev->reset_wait_queue, wait);
+ poll_wait(filp, &dev->rx_wait_queue, wait);
+
+ if (!user->opened)
+ mask |= POLLERR | POLLRDHUP | POLLPRI;
+ else
+ mask |= POLLOUT; /* We can TX unless there is an error */
+
+ if (!(skb_queue_empty(&dev->rx_queue)))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+/*
+ * struct char_dev_fops - Char devices file operations.
+ * @read: Function that reads from the char device.
+ * @write: Function that writes to the char device.
+ * @unlocked_ioctl: Function that performs IO operations with
+ * the char device.
+ * @poll: Function that checks if there are possible operations
+ * with the char device.
+ * @open: Function that opens the char device.
+ * @release: Function that release the char device.
+ */
+static const struct file_operations char_dev_fops = {
+ .read = char_dev_read,
+ .write = char_dev_write,
+ .unlocked_ioctl = char_dev_unlocked_ioctl,
+ .poll = char_dev_poll,
+ .open = char_dev_open,
+ .release = char_dev_release
+};
+
+/**
+ * remove_dev() - Remove char device structure for device.
+ * @dev_usr: Char device user.
+ *
+ * The remove_dev() function releases the char_dev structure for this device.
+ */
+static void remove_dev(struct char_dev_user *dev_usr)
+{
+ if (!dev_usr)
+ return;
+
+ dev_dbg(dev_usr->dev,
+ "Removing char device %s with major %d and minor %d\n",
+ dev_usr->name,
+ MAJOR(dev_usr->miscdev.this_device->devt),
+ MINOR(dev_usr->miscdev.this_device->devt));
+
+ skb_queue_purge(&dev_usr->rx_queue);
+
+ mutex_destroy(&dev_usr->read_mutex);
+ mutex_destroy(&dev_usr->write_mutex);
+
+ /* Remove device node in file system. */
+ misc_deregister(&dev_usr->miscdev);
+ kfree(dev_usr);
+}
+
+/**
+ * cg2900_char_probe() - Initialize char device module.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM if allocation fails.
+ * -EACCES if device already have been initiated.
+ */
+static int __devinit cg2900_char_probe(struct platform_device *pdev)
+{
+ int err = 0;
+ struct char_dev_user *dev_usr;
+ struct cg2900_user_data *user;
+ struct device *dev = &pdev->dev;
+
+ dev_dbg(&pdev->dev, "cg2900_char_probe\n");
+
+ user = dev_get_platdata(dev);
+ user->dev = dev;
+ user->read_cb = char_dev_read_cb;
+ user->reset_cb = char_dev_reset_cb;
+ if (!dev_get_platdata(dev))
+ dev->platform_data = user;
+ else
+ dev_err(dev, "Platform data set when it shouldn't be\n");
+
+ dev_usr = kzalloc(sizeof(*dev_usr), GFP_KERNEL);
+ if (!dev_usr) {
+ dev_err(&pdev->dev, "Couldn't allocate dev_usr\n");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(&pdev->dev, dev_usr);
+ dev_usr->dev = &pdev->dev;
+
+ /* Store device name */
+ dev_usr->name = user->channel_data.char_dev_name;
+
+ /* Prepare miscdevice struct before registering the device */
+ dev_usr->miscdev.minor = MISC_DYNAMIC_MINOR;
+ dev_usr->miscdev.name = dev_usr->name;
+ dev_usr->miscdev.nodename = dev_usr->name;
+ dev_usr->miscdev.fops = &char_dev_fops;
+ dev_usr->miscdev.parent = &pdev->dev;
+ dev_usr->miscdev.mode = S_IRUGO | S_IWUGO;
+
+ err = misc_register(&dev_usr->miscdev);
+ if (err) {
+ dev_err(&pdev->dev, "Error %d registering misc dev\n", err);
+ goto err_free_usr;
+ }
+
+ dev_dbg(&pdev->dev, "Added char device %s with major %d and minor %d\n",
+ dev_usr->name, MAJOR(dev_usr->miscdev.this_device->devt),
+ MINOR(dev_usr->miscdev.this_device->devt));
+
+ mutex_init(&dev_usr->read_mutex);
+ mutex_init(&dev_usr->write_mutex);
+
+ skb_queue_head_init(&dev_usr->rx_queue);
+
+ mutex_lock(&char_info->man_mutex);
+ list_add_tail(&dev_usr->list, &char_info->dev_users);
+ mutex_unlock(&char_info->man_mutex);
+
+ return 0;
+
+err_free_usr:
+ kfree(dev_usr);
+ dev_set_drvdata(&pdev->dev, NULL);
+ return err;
+}
+
+/**
+ * cg2900_char_remove() - Release the char device module.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success (always success).
+ */
+static int __devexit cg2900_char_remove(struct platform_device *pdev)
+{
+ struct list_head *cursor, *next;
+ struct char_dev_user *tmp;
+ struct char_dev_user *user;
+
+ dev_dbg(&pdev->dev, "cg2900_char_remove\n");
+
+ user = dev_get_drvdata(&pdev->dev);
+
+ mutex_lock(&char_info->man_mutex);
+ list_for_each_safe(cursor, next, &char_info->dev_users) {
+ tmp = list_entry(cursor, struct char_dev_user, list);
+ if (tmp == user) {
+ list_del(cursor);
+ remove_dev(tmp);
+ dev_set_drvdata(&pdev->dev, NULL);
+ break;
+ }
+ }
+ mutex_unlock(&char_info->man_mutex);
+ return 0;
+}
+
+static struct platform_driver cg2900_char_driver = {
+ .driver = {
+ .name = "cg2900-chardev",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_char_probe,
+ .remove = __devexit_p(cg2900_char_remove),
+};
+
+/**
+ * cg2900_char_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_char_init(void)
+{
+ pr_debug("cg2900_char_init");
+
+ /* Initialize private data. */
+ char_info = kzalloc(sizeof(*char_info), GFP_ATOMIC);
+ if (!char_info) {
+ pr_err("Could not alloc char_info struct");
+ return -ENOMEM;
+ }
+
+ mutex_init(&char_info->open_mutex);
+ mutex_init(&char_info->man_mutex);
+ INIT_LIST_HEAD(&char_info->dev_users);
+
+ return platform_driver_register(&cg2900_char_driver);
+}
+
+/**
+ * cg2900_char_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_char_exit(void)
+{
+ struct list_head *cursor, *next;
+ struct char_dev_user *tmp;
+
+ pr_debug("cg2900_char_exit");
+
+ platform_driver_unregister(&cg2900_char_driver);
+
+ if (!char_info)
+ return;
+
+ list_for_each_safe(cursor, next, &char_info->dev_users) {
+ tmp = list_entry(cursor, struct char_dev_user, list);
+ list_del(cursor);
+ remove_dev(tmp);
+ }
+
+ mutex_destroy(&char_info->open_mutex);
+ mutex_destroy(&char_info->man_mutex);
+
+ kfree(char_info);
+ char_info = NULL;
+}
+
+module_init(cg2900_char_init);
+module_exit(cg2900_char_exit);
+
+MODULE_AUTHOR("Henrik Possung ST-Ericsson");
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ST-Ericsson CG2900 Char Devices Driver");
diff --git a/drivers/staging/cg2900/mfd/cg2900_chip.c b/drivers/staging/cg2900/mfd/cg2900_chip.c
new file mode 100644
index 0000000..f80a3db
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_chip.c
@@ -0,0 +1,3415 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+#define NAME "cg2900_chip"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_chip.h"
+#include "cg2900_core.h"
+#include "cg2900_lib.h"
+
+#define MAIN_DEV (main_info->dev)
+#define BOOT_DEV (info->user_in_charge->dev)
+
+#define WQ_NAME "cg2900_chip_wq"
+
+/*
+ * After waiting the first 500 ms we should just try to get the selftest results
+ * for another number of poll attempts
+ */
+#define MAX_NBR_OF_POLLS 50
+
+#define LINE_TOGGLE_DETECT_TIMEOUT 50 /* ms */
+#define CHIP_READY_TIMEOUT 100 /* ms */
+#define CHIP_STARTUP_TIMEOUT 15000 /* ms */
+#define CHIP_SHUTDOWN_TIMEOUT 15000 /* ms */
+#define POWER_SW_OFF_WAIT 500 /* ms */
+#define SELFTEST_INITIAL 500 /* ms */
+#define SELFTEST_POLLING 20 /* ms */
+
+/** CHANNEL_BT_CMD - Bluetooth HCI H:4 channel
+ * for Bluetooth commands in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_CMD 0x01
+
+/** CHANNEL_BT_ACL - Bluetooth HCI H:4 channel
+ * for Bluetooth ACL data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_ACL 0x02
+
+/** CHANNEL_BT_EVT - Bluetooth HCI H:4 channel
+ * for Bluetooth events in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_EVT 0x04
+
+/** CHANNEL_FM_RADIO - Bluetooth HCI H:4 channel
+ * for FM radio in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_FM_RADIO 0x08
+
+/** CHANNEL_GNSS - Bluetooth HCI H:4 channel
+ * for GNSS in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_GNSS 0x09
+
+/** CHANNEL_DEBUG - Bluetooth HCI H:4 channel
+ * for internal debug data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_DEBUG 0x0B
+
+/** CHANNEL_STE_TOOLS - Bluetooth HCI H:4 channel
+ * for development tools data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_STE_TOOLS 0x0D
+
+/** CHANNEL_HCI_LOGGER - Bluetooth HCI H:4 channel
+ * for logging all transmitted H4 packets (on all channels).
+ */
+#define CHANNEL_HCI_LOGGER 0xFA
+
+/** CHANNEL_CORE - Bluetooth HCI H:4 channel
+ * for user space control of the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_CORE 0xFD
+
+/** CG2900_BT_CMD - Bluetooth HCI H4 channel for Bluetooth commands.
+ */
+#define CG2900_BT_CMD "cg2900_bt_cmd"
+
+/** CG2900_BT_ACL - Bluetooth HCI H4 channel for Bluetooth ACL data.
+ */
+#define CG2900_BT_ACL "cg2900_bt_acl"
+
+/** CG2900_BT_EVT - Bluetooth HCI H4 channel for Bluetooth events.
+ */
+#define CG2900_BT_EVT "cg2900_bt_evt"
+
+/** CG2900_FM_RADIO - Bluetooth HCI H4 channel for FM radio.
+ */
+#define CG2900_FM_RADIO "cg2900_fm_radio"
+
+/** CG2900_GNSS - Bluetooth HCI H4 channel for GNSS.
+ */
+#define CG2900_GNSS "cg2900_gnss"
+
+/** CG2900_DEBUG - Bluetooth HCI H4 channel for internal debug data.
+ */
+#define CG2900_DEBUG "cg2900_debug"
+
+/** CG2900_STE_TOOLS - Bluetooth HCI H4 channel for development tools data.
+ */
+#define CG2900_STE_TOOLS "cg2900_ste_tools"
+
+/** CG2900_HCI_LOGGER - BT channel for logging all transmitted H4 packets.
+ * Data read is copy of all data transferred on the other channels.
+ * Only write allowed is configuration of the HCI Logger.
+ */
+#define CG2900_HCI_LOGGER "cg2900_hci_logger"
+
+/** CG2900_BT_AUDIO - HCI Channel for BT audio configuration commands.
+ * Maps to Bluetooth command and event channels.
+ */
+#define CG2900_BT_AUDIO "cg2900_bt_audio"
+
+/** CG2900_FM_AUDIO - HCI channel for FM audio configuration commands.
+ * Maps to FM Radio channel.
+ */
+#define CG2900_FM_AUDIO "cg2900_fm_audio"
+
+/** CG2900_CORE- Channel for keeping ST-Ericsson CG2900 enabled.
+ * Opening this channel forces the chip to stay powered.
+ * No data can be written to or read from this channel.
+ */
+#define CG2900_CORE "cg2900_core"
+
+/**
+ * enum main_state - Main-state for CG2900 driver.
+ * @CG2900_INIT: CG2900 initializing.
+ * @CG2900_IDLE: No user registered to CG2900 driver.
+ * @CG2900_BOOTING: CG2900 booting after first user is registered.
+ * @CG2900_CLOSING: CG2900 closing after last user has deregistered.
+ * @CG2900_RESETING: CG2900 reset requested.
+ * @CG2900_ACTIVE: CG2900 up and running with at least one user.
+ */
+enum main_state {
+ CG2900_INIT,
+ CG2900_IDLE,
+ CG2900_BOOTING,
+ CG2900_CLOSING,
+ CG2900_RESETING,
+ CG2900_ACTIVE
+};
+
+/**
+ * enum boot_state - BOOT-state for CG2900 chip driver.
+ * @BOOT_NOT_STARTED: Boot has not yet started.
+ * @BOOT_SEND_BD_ADDRESS: VS Store In FS command with BD address
+ * has been sent.
+ * @BOOT_GET_FILES_TO_LOAD: CG2900 chip driver is retrieving file to
+ * load.
+ * @BOOT_DOWNLOAD_PATCH: CG2900 chip driver is downloading
+ * patches.
+ * @BOOT_ACTIVATE_PATCHES_AND_SETTINGS: CG2900 chip driver is activating patches
+ * and settings.
+ * @BOOT_READ_SELFTEST_RESULT: CG2900 is performing selftests that
+ * shall be read out.
+ * @BOOT_DISABLE_BT: Disable BT Core.
+ * @BOOT_READY: CG2900 chip driver boot is ready.
+ * @BOOT_FAILED: CG2900 chip driver boot failed.
+ */
+enum boot_state {
+ BOOT_NOT_STARTED,
+ BOOT_SEND_BD_ADDRESS,
+ BOOT_GET_FILES_TO_LOAD,
+ BOOT_DOWNLOAD_PATCH,
+ BOOT_ACTIVATE_PATCHES_AND_SETTINGS,
+ BOOT_READ_SELFTEST_RESULT,
+ BOOT_DISABLE_BT,
+ BOOT_READY,
+ BOOT_FAILED
+};
+
+/**
+ * enum closing_state - CLOSING-state for CG2900 chip driver.
+ * @CLOSING_RESET: HCI RESET_CMD has been sent.
+ * @CLOSING_POWER_SWITCH_OFF: HCI VS_POWER_SWITCH_OFF command has been sent.
+ * @CLOSING_SHUT_DOWN: We have now shut down the chip.
+ */
+enum closing_state {
+ CLOSING_RESET,
+ CLOSING_POWER_SWITCH_OFF,
+ CLOSING_SHUT_DOWN
+};
+
+/**
+ * enum file_load_state - BOOT_FILE_LOAD-state for CG2900 chip driver.
+ * @FILE_LOAD_GET_PATCH: Loading patches.
+ * @FILE_LOAD_GET_STATIC_SETTINGS: Loading static settings.
+ * @FILE_LOAD_NO_MORE_FILES: No more files to load.
+ * @FILE_LOAD_FAILED: File loading failed.
+ */
+enum file_load_state {
+ FILE_LOAD_GET_PATCH,
+ FILE_LOAD_GET_STATIC_SETTINGS,
+ FILE_LOAD_NO_MORE_FILES,
+ FILE_LOAD_FAILED
+};
+
+/**
+ * enum download_state - BOOT_DOWNLOAD state.
+ * @DOWNLOAD_PENDING: Download in progress.
+ * @DOWNLOAD_SUCCESS: Download successfully finished.
+ * @DOWNLOAD_FAILED: Downloading failed.
+ */
+enum download_state {
+ DOWNLOAD_PENDING,
+ DOWNLOAD_SUCCESS,
+ DOWNLOAD_FAILED
+};
+
+/**
+ * enum fm_radio_mode - FM Radio mode.
+ * It's needed because some FM do-commands generate interrupts only when
+ * the FM driver is in specific mode and we need to know if we should expect
+ * the interrupt.
+ * @FM_RADIO_MODE_IDLE: Radio mode is Idle (default).
+ * @FM_RADIO_MODE_FMT: Radio mode is set to FMT (transmitter).
+ * @FM_RADIO_MODE_FMR: Radio mode is set to FMR (receiver).
+ */
+enum fm_radio_mode {
+ FM_RADIO_MODE_IDLE = 0,
+ FM_RADIO_MODE_FMT = 1,
+ FM_RADIO_MODE_FMR = 2
+};
+
+
+/**
+ * struct cg2900_channel_item - List object for channel.
+ * @list: list_head struct.
+ * @user: User for this channel.
+ */
+struct cg2900_channel_item {
+ struct list_head list;
+ struct cg2900_user_data *user;
+};
+
+/**
+ * struct cg2900_delayed_work_struct - Work structure for CG2900 chip.
+ * @delayed_work: Work structure.
+ * @data: Pointer to private data.
+ */
+struct cg2900_delayed_work_struct {
+ struct delayed_work work;
+ void *data;
+};
+
+/**
+ * struct cg2900_skb_data - Structure for storing private data in an sk_buffer.
+ * @dev: CG2900 device for this sk_buffer.
+ */
+struct cg2900_skb_data {
+ struct cg2900_user_data *user;
+};
+#define cg2900_skb_data(__skb) ((struct cg2900_skb_data *)((__skb)->cb))
+
+/**
+ * struct cg2900_chip_info - Main info structure for CG2900 chip driver.
+ * @dev: Current device. Same as @chip_dev->dev.
+ * @patch_file_name: Stores patch file name.
+ * @settings_file_name: Stores settings file name.
+ * @file_info: Firmware file info (patch or settings).
+ * @boot_state: Current BOOT-state of CG2900 chip driver.
+ * @closing_state: Current CLOSING-state of CG2900 chip driver.
+ * @file_load_state: Current BOOT_FILE_LOAD-state of CG2900 chip
+ * driver.
+ * @download_state: Current BOOT_DOWNLOAD-state of CG2900 chip
+ * driver.
+ * @wq: CG2900 chip driver workqueue.
+ * @chip_dev: Chip handler info.
+ * @tx_bt_lock: Spinlock used to protect some global structures
+ * related to internal BT command flow control.
+ * @tx_fm_lock: Spinlock used to protect some global structures
+ * related to internal FM command flow control.
+ * @tx_fm_audio_awaiting_irpt: Indicates if an FM interrupt event related to
+ * audio driver command is expected.
+ * @fm_radio_mode: Current FM radio mode.
+ * @tx_nr_pkts_allowed_bt: Number of packets allowed to send on BT HCI CMD
+ * H4 channel.
+ * @audio_bt_cmd_op: Stores the OpCode of the last sent audio driver
+ * HCI BT CMD.
+ * @audio_fm_cmd_id: Stores the command id of the last sent
+ * HCI FM RADIO command by the fm audio user.
+ * @hci_fm_cmd_func: Stores the command function of the last sent
+ * HCI FM RADIO command by the fm radio user.
+ * @tx_queue_bt: TX queue for HCI BT commands when nr of commands
+ * allowed is 0 (CG2900 internal flow control).
+ * @tx_queue_fm: TX queue for HCI FM commands when nr of commands
+ * allowed is 0 (CG2900 internal flow control).
+ * @user_in_charge: User currently operating. Normally used at
+ * channel open and close.
+ * @last_user: Last user of this chip. To avoid complications
+ * this will never be set for bt_audio and
+ * fm_audio.
+ * @logger: Logger user of this chip.
+ * @selftest_work: Delayed work for reading selftest results.
+ * @nbr_of_polls: Number of times we should poll for selftest
+ * results.
+ */
+struct cg2900_chip_info {
+ struct device *dev;
+ char *patch_file_name;
+ char *settings_file_name;
+ struct cg2900_file_info file_info;
+ enum main_state main_state;
+ enum boot_state boot_state;
+ enum closing_state closing_state;
+ enum file_load_state file_load_state;
+ enum download_state download_state;
+ struct workqueue_struct *wq;
+ struct cg2900_chip_dev *chip_dev;
+ spinlock_t tx_bt_lock;
+ spinlock_t tx_fm_lock;
+ spinlock_t rw_lock;
+ bool tx_fm_audio_awaiting_irpt;
+ enum fm_radio_mode fm_radio_mode;
+ int tx_nr_pkts_allowed_bt;
+ u16 audio_bt_cmd_op;
+ u16 audio_fm_cmd_id;
+ u16 hci_fm_cmd_func;
+ struct sk_buff_head tx_queue_bt;
+ struct sk_buff_head tx_queue_fm;
+ struct list_head open_channels;
+ struct cg2900_user_data *user_in_charge;
+ struct cg2900_user_data *last_user;
+ struct cg2900_user_data *logger;
+ struct cg2900_user_data *bt_audio;
+ struct cg2900_user_data *fm_audio;
+ struct cg2900_delayed_work_struct selftest_work;
+ int nbr_of_polls;
+};
+
+/**
+ * struct main_info - Main info structure for CG2900 chip driver.
+ * @dev: Device structure.
+ * @cell_base_id: Base ID for MFD cells.
+ * @man_mutex: Management mutex.
+ */
+struct main_info {
+ struct device *dev;
+ int cell_base_id;
+ struct mutex man_mutex;
+};
+
+static struct main_info *main_info;
+
+/*
+ * main_wait_queue - Main Wait Queue in CG2900 driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(main_wait_queue);
+
+static void chip_startup_finished(struct cg2900_chip_info *info, int err);
+static void chip_shutdown(struct cg2900_user_data *user);
+
+/**
+ * bt_is_open() - Checks if any BT user is in open state.
+ * @info: CG2900 info.
+ *
+ * Returns:
+ * true if a BT channel is open.
+ * false if no BT channel is open.
+ */
+static bool bt_is_open(struct cg2900_chip_info *info)
+{
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == CHANNEL_BT_CMD)
+ return true;
+ }
+ return false;
+}
+
+/**
+ * fm_is_open() - Checks if any FM user is in open state.
+ * @info: CG2900 info.
+ *
+ * Returns:
+ * true if a FM channel is open.
+ * false if no FM channel is open.
+ */
+static bool fm_is_open(struct cg2900_chip_info *info)
+{
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == CHANNEL_FM_RADIO)
+ return true;
+ }
+ return false;
+}
+
+/**
+ * fm_irpt_expected() - check if this FM command will generate an interrupt.
+ * @cmd_id: command identifier.
+ *
+ * Returns:
+ * true if the command will generate an interrupt.
+ * false if it won't.
+ */
+static bool fm_irpt_expected(struct cg2900_chip_info *info, u16 cmd_id)
+{
+ bool retval = false;
+
+ switch (cmd_id) {
+ case CG2900_FM_DO_AIP_FADE_START:
+ if (info->fm_radio_mode == FM_RADIO_MODE_FMT)
+ retval = true;
+ break;
+
+ case CG2900_FM_DO_AUP_BT_FADE_START:
+ case CG2900_FM_DO_AUP_EXT_FADE_START:
+ case CG2900_FM_DO_AUP_FADE_START:
+ if (info->fm_radio_mode == FM_RADIO_MODE_FMR)
+ retval = true;
+ break;
+
+ case CG2900_FM_DO_FMR_SETANTENNA:
+ case CG2900_FM_DO_FMR_SP_AFSWITCH_START:
+ case CG2900_FM_DO_FMR_SP_AFUPDATE_START:
+ case CG2900_FM_DO_FMR_SP_BLOCKSCAN_START:
+ case CG2900_FM_DO_FMR_SP_PRESETPI_START:
+ case CG2900_FM_DO_FMR_SP_SCAN_START:
+ case CG2900_FM_DO_FMR_SP_SEARCH_START:
+ case CG2900_FM_DO_FMR_SP_SEARCHPI_START:
+ case CG2900_FM_DO_FMR_SP_TUNE_SETCHANNEL:
+ case CG2900_FM_DO_FMR_SP_TUNE_STEPCHANNEL:
+ case CG2900_FM_DO_FMT_PA_SETCTRL:
+ case CG2900_FM_DO_FMT_PA_SETMODE:
+ case CG2900_FM_DO_FMT_SP_TUNE_SETCHANNEL:
+ case CG2900_FM_DO_GEN_ANTENNACHECK_START:
+ case CG2900_FM_DO_GEN_GOTOMODE:
+ case CG2900_FM_DO_GEN_POWERSUPPLY_SETMODE:
+ case CG2900_FM_DO_GEN_SELECTREFERENCECLOCK:
+ case CG2900_FM_DO_GEN_SETPROCESSINGCLOCK:
+ case CG2900_FM_DO_GEN_SETREFERENCECLOCKPLL:
+ case CG2900_FM_DO_TST_TX_RAMP_START:
+ retval = true;
+ break;
+
+ default:
+ break;
+ }
+
+ if (retval)
+ dev_dbg(info->dev, "Following interrupt event expected for this"
+ " Cmd complete evt: cmd_id = 0x%X\n",
+ cmd_id);
+
+ return retval;
+}
+
+/**
+ * fm_is_do_cmd_irpt() - Check if irpt_val is one of the FM DO command related interrupts.
+ * @irpt_val: interrupt value.
+ *
+ * Returns:
+ * true if it's do-command related interrupt value.
+ * false if it's not.
+ */
+static bool fm_is_do_cmd_irpt(u16 irpt_val)
+{
+ if ((irpt_val & CG2900_FM_IRPT_OPERATION_SUCCEEDED) ||
+ (irpt_val & CG2900_FM_IRPT_OPERATION_FAILED)) {
+ dev_dbg(MAIN_DEV, "Irpt evt for FM do-command found, "
+ "irpt_val = 0x%X\n", irpt_val);
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * fm_reset_flow_ctrl - Clears up internal FM flow control.
+ *
+ * Resets outstanding commands and clear FM TX list and set CG2900 FM mode to
+ * idle.
+ */
+static void fm_reset_flow_ctrl(struct cg2900_chip_info *info)
+{
+ dev_dbg(info->dev, "fm_reset_flow_ctrl\n");
+
+ skb_queue_purge(&info->tx_queue_fm);
+
+ /* Reset the fm_cmd_id. */
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+
+ info->fm_radio_mode = FM_RADIO_MODE_IDLE;
+}
+
+
+/**
+ * fm_parse_cmd - Parses a FM command packet.
+ * @data: FM command packet.
+ * @cmd_func: Out: FM legacy command function.
+ * @cmd_id: Out: FM legacy command ID.
+ */
+static void fm_parse_cmd(u8 *data, u8 *cmd_func, u16 *cmd_id)
+{
+ /* Move past H4-header to start of actual package */
+ struct fm_leg_cmd *pkt = (struct fm_leg_cmd *)(data + HCI_H4_SIZE);
+
+ *cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ *cmd_id = CG2900_FM_CMD_NONE;
+
+ if (pkt->opcode != CG2900_FM_GEN_ID_LEGACY) {
+ dev_err(MAIN_DEV, "fm_parse_cmd: Not an FM legacy command "
+ "0x%02X\n", pkt->opcode);
+ return;
+ }
+
+ *cmd_func = pkt->fm_function;
+ if (*cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND)
+ *cmd_id = cg2900_get_fm_cmd_id(le16_to_cpu(pkt->fm_cmd.head));
+}
+
+
+/**
+ * fm_parse_event - Parses a FM event packet
+ * @data: FM event packet.
+ * @event: Out: FM event.
+ * @cmd_func: Out: FM legacy command function.
+ * @cmd_id: Out: FM legacy command ID.
+ * @intr_val: Out: FM interrupt value.
+ */
+static void fm_parse_event(u8 *data, u8 *event, u8 *cmd_func, u16 *cmd_id,
+ u16 *intr_val)
+{
+ /* Move past H4-header to start of actual package */
+ union fm_leg_evt_or_irq *pkt = (union fm_leg_evt_or_irq *)data;
+
+ *cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ *cmd_id = CG2900_FM_CMD_NONE;
+ *intr_val = 0;
+ *event = CG2900_FM_EVENT_UNKNOWN;
+
+ if (pkt->evt.opcode == CG2900_FM_GEN_ID_LEGACY &&
+ pkt->evt.read_write == CG2900_FM_CMD_LEG_PARAM_WRITE) {
+ /* Command complete */
+ *event = CG2900_FM_EVENT_CMD_COMPLETE;
+ *cmd_func = pkt->evt.fm_function;
+ if (*cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND)
+ *cmd_id = cg2900_get_fm_cmd_id(
+ le16_to_cpu(pkt->evt.response_head));
+ } else if (pkt->irq_v2.opcode == CG2900_FM_GEN_ID_LEGACY &&
+ pkt->irq_v2.event_type == CG2900_FM_CMD_LEG_PARAM_IRQ) {
+ /* Interrupt, PG2 style */
+ *event = CG2900_FM_EVENT_INTERRUPT;
+ *intr_val = le16_to_cpu(pkt->irq_v2.irq);
+ } else if (pkt->irq_v1.opcode == CG2900_FM_GEN_ID_LEGACY) {
+ /* Interrupt, PG1 style */
+ *event = CG2900_FM_EVENT_INTERRUPT;
+ *intr_val = le16_to_cpu(pkt->irq_v1.irq);
+ } else
+ dev_err(MAIN_DEV, "fm_parse_event: Not an FM legacy command "
+ "0x%X %X %X %X\n", data[0], data[1], data[2], data[3]);
+}
+
+/**
+ * fm_update_mode - Updates the FM mode state machine.
+ * @data: FM command packet.
+ *
+ * Parses a FM command packet and updates the FM mode state machine.
+ */
+static void fm_update_mode(struct cg2900_chip_info *info, u8 *data)
+{
+ u8 cmd_func;
+ u16 cmd_id;
+
+ fm_parse_cmd(data, &cmd_func, &cmd_id);
+
+ if (cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND &&
+ cmd_id == CG2900_FM_DO_GEN_GOTOMODE) {
+ /* Move past H4-header to start of actual package */
+ struct fm_leg_cmd *pkt =
+ (struct fm_leg_cmd *)(data + HCI_H4_SIZE);
+
+ info->fm_radio_mode = le16_to_cpu(pkt->fm_cmd.data[0]);
+ dev_dbg(info->dev, "FM Radio mode changed to %d\n",
+ info->fm_radio_mode);
+ }
+}
+
+
+/**
+ * transmit_skb_from_tx_queue_bt() - Check flow control info and transmit skb.
+ *
+ * The transmit_skb_from_tx_queue_bt() function checks if there are tickets
+ * available and commands waiting in the TX queue and if so transmits them
+ * to the controller.
+ * It shall always be called within spinlock_bh.
+ */
+static void transmit_skb_from_tx_queue_bt(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *user;
+ struct cg2900_chip_info *info = dev->c_data;
+ struct sk_buff *skb;
+
+ dev_dbg(dev->dev, "transmit_skb_from_tx_queue_bt\n");
+
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_bt);
+ while (skb) {
+ if (info->tx_nr_pkts_allowed_bt <= 0) {
+ /*
+ * If no more packets allowed just return, we'll get
+ * back here after next Command Complete/Status event.
+ * Put skb back at head of queue.
+ */
+ skb_queue_head(&info->tx_queue_bt, skb);
+ return;
+ }
+
+ (info->tx_nr_pkts_allowed_bt)--;
+ dev_dbg(dev->dev, "tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ user = cg2900_skb_data(skb)->user; /* user is never NULL */
+
+ /*
+ * If it's a command from audio application, store the OpCode,
+ * it'll be used later to decide where to dispatch
+ * the Command Complete event.
+ */
+ if (info->bt_audio == user) {
+ struct hci_command_hdr *hdr = (struct hci_command_hdr *)
+ (skb->data + HCI_H4_SIZE);
+
+ info->audio_bt_cmd_op = le16_to_cpu(hdr->opcode);
+ dev_dbg(user->dev,
+ "Sending cmd from audio driver, saving "
+ "OpCode = 0x%04X\n", info->audio_bt_cmd_op);
+ }
+
+ cg2900_tx_to_chip(user, info->logger, skb);
+
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_bt);
+ }
+}
+
+/**
+ * transmit_skb_from_tx_queue_fm() - Check flow control info and transmit skb.
+ *
+ * The transmit_skb_from_tx_queue_fm() function checks if it possible to
+ * transmit and commands waiting in the TX queue and if so transmits them
+ * to the controller.
+ * It shall always be called within spinlock_bh.
+ */
+static void transmit_skb_from_tx_queue_fm(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *user;
+ struct cg2900_chip_info *info = dev->c_data;
+ struct sk_buff *skb;
+
+ dev_dbg(dev->dev, "transmit_skb_from_tx_queue_fm\n");
+
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_fm);
+ while (skb) {
+ u16 cmd_id;
+ u8 cmd_func;
+
+ if (info->audio_fm_cmd_id != CG2900_FM_CMD_NONE ||
+ info->hci_fm_cmd_func != CG2900_FM_CMD_PARAM_NONE) {
+ /*
+ * There are currently outstanding FM commands.
+ * Wait for them to finish. We will get back here later.
+ * Queue back the skb at head of list.
+ */
+ skb_queue_head(&info->tx_queue_bt, skb);
+ return;
+ }
+
+ user = cg2900_skb_data(skb)->user; /* user is never NULL */
+
+ if (!user->opened) {
+ /*
+ * Channel is not open. That means that the user that
+ * originally sent it has deregistered.
+ * Just throw it away and check the next skb in the
+ * queue.
+ */
+ kfree_skb(skb);
+ /* Dequeue an skb from the head of the list */
+ skb = skb_dequeue(&info->tx_queue_fm);
+ continue;
+ }
+
+ fm_parse_cmd(&(skb->data[0]), &cmd_func, &cmd_id);
+
+ /*
+ * Store the FM command function , it'll be used later to decide
+ * where to dispatch the Command Complete event.
+ */
+ if (info->fm_audio == user) {
+ info->audio_fm_cmd_id = cmd_id;
+ dev_dbg(user->dev, "Sending FM audio cmd 0x%04X\n",
+ info->audio_fm_cmd_id);
+ } else {
+ /* FM radio command */
+ info->hci_fm_cmd_func = cmd_func;
+ fm_update_mode(info, &skb->data[0]);
+ dev_dbg(user->dev, "Sending FM radio cmd 0x%04X\n",
+ info->hci_fm_cmd_func);
+ }
+
+ /*
+ * We have only one ticket on FM. Just return after
+ * sending the skb.
+ */
+ cg2900_tx_to_chip(user, info->logger, skb);
+ return;
+ }
+}
+
+/**
+ * update_flow_ctrl_bt() - Update number of outstanding commands for BT CMD.
+ * @dev: Current chip device.
+ * @skb: skb with received packet.
+ *
+ * The update_flow_ctrl_bt() checks if incoming data packet is
+ * BT Command Complete/Command Status Event and if so updates number of tickets
+ * and number of outstanding commands. It also calls function to send queued
+ * commands (if the list of queued commands is not empty).
+ */
+static void update_flow_ctrl_bt(struct cg2900_chip_dev *dev,
+ const struct sk_buff * const skb)
+{
+ u8 *data = skb->data;
+ struct hci_event_hdr *event;
+ struct cg2900_chip_info *info = dev->c_data;
+
+ event = (struct hci_event_hdr *)data;
+ data += sizeof(*event);
+
+ if (HCI_EV_CMD_COMPLETE == event->evt) {
+ struct hci_ev_cmd_complete *complete;
+ complete = (struct hci_ev_cmd_complete *)data;
+
+ /*
+ * If it's HCI Command Complete Event then we might get some
+ * HCI tickets back. Also we can decrease the number outstanding
+ * HCI commands (if it's not NOP command or one of the commands
+ * that generate both Command Status Event and Command Complete
+ * Event).
+ * Check if we have any HCI commands waiting in the TX list and
+ * send them if there are tickets available.
+ */
+ spin_lock_bh(&info->tx_bt_lock);
+ info->tx_nr_pkts_allowed_bt = complete->ncmd;
+ dev_dbg(dev->dev, "New tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ if (!skb_queue_empty(&info->tx_queue_bt))
+ transmit_skb_from_tx_queue_bt(dev);
+ spin_unlock_bh(&info->tx_bt_lock);
+ } else if (HCI_EV_CMD_STATUS == event->evt) {
+ struct hci_ev_cmd_status *status;
+ status = (struct hci_ev_cmd_status *)data;
+
+ /*
+ * If it's HCI Command Status Event then we might get some
+ * HCI tickets back. Also we can decrease the number outstanding
+ * HCI commands (if it's not NOP command).
+ * Check if we have any HCI commands waiting in the TX queue and
+ * send them if there are tickets available.
+ */
+ spin_lock_bh(&info->tx_bt_lock);
+ info->tx_nr_pkts_allowed_bt = status->ncmd;
+ dev_dbg(dev->dev, "New tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ if (!skb_queue_empty(&info->tx_queue_bt))
+ transmit_skb_from_tx_queue_bt(dev);
+ spin_unlock_bh(&info->tx_bt_lock);
+ }
+}
+
+/**
+ * update_flow_ctrl_fm() - Update packets allowed for FM channel.
+ * @dev: Current chip device.
+ * @skb: skb with received packet.
+ *
+ * The update_flow_ctrl_fm() checks if incoming data packet is FM packet
+ * indicating that the previous command has been handled and if so update
+ * packets. It also calls function to send queued commands (if the list of
+ * queued commands is not empty).
+ */
+static void update_flow_ctrl_fm(struct cg2900_chip_dev *dev,
+ const struct sk_buff * const skb)
+{
+ u8 cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ u16 cmd_id = CG2900_FM_CMD_NONE;
+ u16 irpt_val = 0;
+ u8 event = CG2900_FM_EVENT_UNKNOWN;
+ struct cg2900_chip_info *info = dev->c_data;
+
+ fm_parse_event(&(skb->data[0]), &event, &cmd_func, &cmd_id, &irpt_val);
+
+ if (event == CG2900_FM_EVENT_CMD_COMPLETE) {
+ /* FM legacy command complete event */
+ spin_lock_bh(&info->tx_fm_lock);
+ /*
+ * Check if it's not an write command complete event, because
+ * then it cannot be a DO command.
+ * If it's a write command complete event check that is not a
+ * DO command complete event before setting the outstanding
+ * FM packets to none.
+ */
+ if (cmd_func != CG2900_FM_CMD_PARAM_WRITECOMMAND ||
+ !fm_irpt_expected(info, cmd_id)) {
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ dev_dbg(dev->dev,
+ "FM_Write: Outstanding FM commands:\n"
+ "\tRadio: 0x%04X\n"
+ "\tAudio: 0x%04X\n",
+ info->hci_fm_cmd_func,
+ info->audio_fm_cmd_id);
+ transmit_skb_from_tx_queue_fm(dev);
+
+ /*
+ * If there was a write do command complete event check if it is
+ * DO command previously sent by the FM audio user. If that's
+ * the case we need remember that in order to be able to
+ * dispatch the interrupt to the correct user.
+ */
+ } else if (cmd_id == info->audio_fm_cmd_id) {
+ info->tx_fm_audio_awaiting_irpt = true;
+ dev_dbg(dev->dev,
+ "FM Audio waiting for interrupt = true\n");
+ }
+ spin_unlock_bh(&info->tx_fm_lock);
+ } else if (event == CG2900_FM_EVENT_INTERRUPT) {
+ /* FM legacy interrupt */
+ if (fm_is_do_cmd_irpt(irpt_val)) {
+ /*
+ * If it is an interrupt related to a DO command update
+ * the outstanding flow control and transmit blocked
+ * FM commands.
+ */
+ spin_lock_bh(&info->tx_fm_lock);
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ dev_dbg(dev->dev,
+ "FM_INT: Outstanding FM commands:\n"
+ "\tRadio: 0x%04X\n"
+ "\tAudio: 0x%04X\n",
+ info->hci_fm_cmd_func,
+ info->audio_fm_cmd_id);
+ info->tx_fm_audio_awaiting_irpt = false;
+ dev_dbg(dev->dev,
+ "FM Audio waiting for interrupt = false\n");
+ transmit_skb_from_tx_queue_fm(dev);
+ spin_unlock_bh(&info->tx_fm_lock);
+ }
+ }
+}
+
+/**
+ * send_bt_enable() - Send HCI VS BT Enable command to the chip.
+ * @info: Chip info structure.
+ * @bt_enable: Value for BT Enable parameter (e.g. CG2900_BT_DISABLE).
+ */
+static void send_bt_enable(struct cg2900_chip_info *info, u8 bt_enable)
+{
+ struct bt_vs_bt_enable_cmd cmd;
+
+ cmd.op_code = cpu_to_le16(CG2900_BT_OP_VS_BT_ENABLE);
+ cmd.plen = BT_PARAM_LEN(sizeof(cmd));
+ cmd.enable = bt_enable;
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger,
+ &cmd, sizeof(cmd));
+}
+
+/**
+ * send_bd_address() - Send HCI VS command with BD address to the chip.
+ */
+static void send_bd_address(struct cg2900_chip_info *info)
+{
+ struct bt_vs_store_in_fs_cmd *cmd;
+ u8 plen = sizeof(*cmd) + BT_BDADDR_SIZE;
+
+ cmd = kmalloc(plen, GFP_KERNEL);
+ if (!cmd) {
+ dev_err(info->dev, "send_bd_address could not allocate cmd\n");
+ return;
+ }
+
+ cmd->opcode = cpu_to_le16(CG2900_BT_OP_VS_STORE_IN_FS);
+ cmd->plen = BT_PARAM_LEN(plen);
+ cmd->user_id = CG2900_VS_STORE_IN_FS_USR_ID_BD_ADDR;
+ cmd->len = BT_BDADDR_SIZE;
+ /* Now copy the BD address received from user space control app. */
+ memcpy(cmd->data, bd_address, BT_BDADDR_SIZE);
+
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_SEND_BD_ADDRESS\n");
+ info->boot_state = BOOT_SEND_BD_ADDRESS;
+
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, cmd, plen);
+
+ kfree(cmd);
+}
+
+/**
+ * send_settings_file() - Transmit settings file.
+ *
+ * The send_settings_file() function transmit settings file.
+ * The file is read in parts to fit in HCI packets. When finished,
+ * close the settings file and send HCI reset to activate settings and patches.
+ */
+static void send_settings_file(struct cg2900_chip_info *info)
+{
+ int bytes_sent;
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_settings_file: Error %d occurred\n",
+ bytes_sent);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, bytes_sent);
+ return;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ /* Settings file finished. Release used resources */
+ dev_dbg(BOOT_DEV, "Settings file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_NO_MORE_FILES\n");
+ info->file_load_state = FILE_LOAD_NO_MORE_FILES;
+
+ /* Create and send HCI VS Store In FS command with bd address. */
+ send_bd_address(info);
+}
+
+/**
+ * send_patch_file - Transmit patch file.
+ *
+ * The send_patch_file() function transmit patch file.
+ * The file is read in parts to fit in HCI packets. When the complete file is
+ * transmitted, the file is closed.
+ * When finished, continue with settings file.
+ */
+static void send_patch_file(struct cg2900_chip_dev *dev)
+{
+ int err;
+ int bytes_sent;
+ struct cg2900_chip_info *info = dev->c_data;
+ int file_name_size = strlen("CG2900_XXXX_XXXX_settings.fw");
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_patch_file: Error %d occurred\n",
+ bytes_sent);
+ err = bytes_sent;
+ goto error_handling;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ dev_dbg(BOOT_DEV, "Patch file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ /*
+ * Create the settings file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->settings_file_name, file_name_size + 1,
+ "CG2900_%04X_%04X_settings.fw", dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading settings file %s\n",
+ info->settings_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Settings file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* Retrieve the settings file */
+ err = request_firmware(&info->file_info.fw_file,
+ info->settings_file_name,
+ info->dev);
+ if (err) {
+ dev_err(BOOT_DEV, "Couldn't get settings file (%d)\n", err);
+ goto error_handling;
+ }
+ /* Now send the settings file */
+ dev_dbg(BOOT_DEV,
+ "New file_load_state: FILE_LOAD_GET_STATIC_SETTINGS\n");
+ info->file_load_state = FILE_LOAD_GET_STATIC_SETTINGS;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ send_settings_file(info);
+ return;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, err);
+}
+
+/**
+ * work_power_off_chip() - Work item to power off the chip.
+ * @work: Reference to work data.
+ *
+ * The work_power_off_chip() function handles transmission of the HCI command
+ * vs_power_switch_off and then informs the CG2900 Core that this chip driver is
+ * finished and the Core driver can now shut off the chip.
+ */
+static void work_power_off_chip(struct work_struct *work)
+{
+ struct sk_buff *skb = NULL;
+ u8 *h4_header;
+ struct cg2900_platform_data *pf_data;
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_power_off_chip: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /*
+ * Get the VS Power Switch Off command to use based on connected
+ * connectivity controller
+ */
+ pf_data = dev_get_platdata(dev->dev);
+ if (pf_data->get_power_switch_off_cmd)
+ skb = pf_data->get_power_switch_off_cmd(dev, NULL);
+
+ /*
+ * Transmit the received command.
+ * If no command found for the device, just continue
+ */
+ if (!skb) {
+ dev_err(dev->dev,
+ "Could not retrieve PowerSwitchOff command\n");
+ goto shut_down_chip;
+ }
+
+ dev_dbg(dev->dev,
+ "Got power_switch_off command. Add H4 header and transmit\n");
+
+ /*
+ * Move the data pointer to the H:4 header position and store
+ * the H4 header
+ */
+ h4_header = skb_push(skb, CG2900_SKB_RESERVE);
+ *h4_header = CHANNEL_BT_CMD;
+
+ dev_dbg(dev->dev, "New closing_state: CLOSING_POWER_SWITCH_OFF\n");
+ info->closing_state = CLOSING_POWER_SWITCH_OFF;
+
+ if (info->user_in_charge)
+ cg2900_tx_to_chip(info->user_in_charge, info->logger, skb);
+ else
+ cg2900_tx_no_user(dev, skb);
+
+ /*
+ * Mandatory to wait 500ms after the power_switch_off command has been
+ * transmitted, in order to make sure that the controller is ready.
+ */
+ schedule_timeout_killable(msecs_to_jiffies(POWER_SW_OFF_WAIT));
+
+shut_down_chip:
+ dev_dbg(dev->dev, "New closing_state: CLOSING_SHUT_DOWN\n");
+ info->closing_state = CLOSING_SHUT_DOWN;
+
+ /* Close the transport, which will power off the chip */
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ /* Chip shut-down finished, set correct state and wake up the chip. */
+ dev_dbg(dev->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+ wake_up_all(&main_wait_queue);
+
+ kfree(my_work);
+}
+
+/**
+ * work_chip_shutdown() - Shut down the chip.
+ * @work: Reference to work data.
+ */
+static void work_chip_shutdown(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_user_data *user;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_chip_shutdown: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ user = my_work->user_data;
+
+ chip_shutdown(user);
+
+ kfree(my_work);
+}
+
+/**
+ * work_reset_after_error() - Handle reset.
+ * @work: Reference to work data.
+ *
+ * Handle a reset after received Command Complete event.
+ */
+static void work_reset_after_error(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_reset_after_error: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ chip_startup_finished(info, -EIO);
+
+ kfree(my_work);
+}
+
+/**
+ * work_load_patch_and_settings() - Start loading patches and settings.
+ * @work: Reference to work data.
+ */
+static void work_load_patch_and_settings(struct work_struct *work)
+{
+ int err = 0;
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int file_name_size = strlen("CG2900_XXXX_XXXX_patch.fw");
+
+ if (!work) {
+ dev_err(MAIN_DEV,
+ "work_load_patch_and_settings: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Check that we are in the right state */
+ if (info->boot_state != BOOT_GET_FILES_TO_LOAD)
+ goto finished;
+
+ /*
+ * Create the patch file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->patch_file_name, file_name_size + 1,
+ "CG2900_%04X_%04X_patch.fw", dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading patch file %s\n",
+ info->patch_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Patch file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* We now all info needed */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DOWNLOAD_PATCH\n");
+ info->boot_state = BOOT_DOWNLOAD_PATCH;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_GET_PATCH\n");
+ info->file_load_state = FILE_LOAD_GET_PATCH;
+ info->file_info.chunk_id = 0;
+ info->file_info.file_offset = 0;
+ info->file_info.fw_file = NULL;
+
+ /* OK. Now it is time to download the patches */
+ err = request_firmware(&(info->file_info.fw_file),
+ info->patch_file_name,
+ dev->dev);
+ if (err < 0) {
+ dev_err(BOOT_DEV, "Couldn't get patch file (%d)\n", err);
+ goto error_handling;
+ }
+ send_patch_file(dev);
+
+ goto finished;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+finished:
+ kfree(my_work);
+}
+
+/**
+ * work_cont_file_download() - A file block has been written.
+ * @work: Reference to work data.
+ *
+ * Handle a received HCI VS Write File Block Complete event.
+ * Normally this means continue to send files to the controller.
+ */
+static void work_cont_file_download(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_cont_file_download: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Continue to send patches or settings to the controller */
+ if (info->file_load_state == FILE_LOAD_GET_PATCH)
+ send_patch_file(dev);
+ else if (info->file_load_state == FILE_LOAD_GET_STATIC_SETTINGS)
+ send_settings_file(info);
+ else
+ dev_dbg(BOOT_DEV, "No more files to load\n");
+
+ kfree(my_work);
+}
+
+/**
+ * work_send_read_selftest_cmd() - HCI VS Read_SelfTests_Result command shall be sent.
+ * @work: Reference to work data.
+ */
+static void work_send_read_selftest_cmd(struct work_struct *work)
+{
+ struct delayed_work *del_work;
+ struct cg2900_delayed_work_struct *current_work;
+ struct cg2900_chip_info *info;
+ struct hci_command_hdr cmd;
+
+ if (!work) {
+ dev_err(MAIN_DEV,
+ "work_send_read_selftest_cmd: work == NULL\n");
+ return;
+ }
+
+ del_work = to_delayed_work(work);
+ current_work = container_of(del_work,
+ struct cg2900_delayed_work_struct, work);
+ info = current_work->data;
+
+ if (info->boot_state != BOOT_READ_SELFTEST_RESULT)
+ return;
+
+ cmd.opcode = cpu_to_le16(CG2900_BT_OP_VS_READ_SELTESTS_RESULT);
+ cmd.plen = 0; /* No parameters for Read Selftests Result */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+}
+
+/**
+ * handle_reset_cmd_complete() - Handles HCI Reset Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_reset_cmd_complete(struct cg2900_chip_dev *dev, u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV, "Received Reset complete event with status 0x%X\n",
+ status);
+
+ if (CG2900_CLOSING != info->main_state &&
+ CLOSING_RESET != info->closing_state)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ /*
+ * Continue in case of error, the chip is going to be shut down
+ * anyway.
+ */
+ dev_err(BOOT_DEV, "Command complete for HciReset received with "
+ "error 0x%X\n", status);
+ }
+
+ cg2900_create_work_item(info->wq, work_power_off_chip, dev);
+
+ return true;
+}
+
+/**
+ * handle_vs_store_in_fs_cmd_complete() - Handles HCI VS StoreInFS Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_store_in_fs_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV,
+ "Received Store_in_FS complete event with status 0x%X\n",
+ status);
+
+ if (info->boot_state != BOOT_SEND_BD_ADDRESS)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ struct hci_command_hdr cmd;
+
+ /* Send HCI SystemReset command to activate patches */
+ dev_dbg(BOOT_DEV,
+ "New boot_state: BOOT_ACTIVATE_PATCHES_AND_SETTINGS\n");
+ info->boot_state = BOOT_ACTIVATE_PATCHES_AND_SETTINGS;
+
+ cmd.opcode = cpu_to_le16(CG2900_BT_OP_VS_SYSTEM_RESET);
+ cmd.plen = 0; /* No parameters for System Reset */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+ } else {
+ dev_err(BOOT_DEV,
+ "Command complete for StoreInFS received with error "
+ "0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_complete() - Handles HCI VS WriteFileBlock Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status)
+ cg2900_create_work_item(info->wq, work_cont_file_download, dev);
+ else {
+ dev_err(BOOT_DEV,
+ "Command complete for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_status() - Handles HCI VS WriteFileBlock Command Status event.
+ * @status: Returned status of WriteFileBlock command.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_status(struct cg2900_chip_dev *dev,
+ u8 status)
+{
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ /*
+ * Only do something if there is an error. Otherwise we will wait for
+ * CmdComplete.
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV,
+ "Command status for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_power_switch_off_cmd_complete() - Handles HCI VS PowerSwitchOff Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_power_switch_off_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (CLOSING_POWER_SWITCH_OFF != info->closing_state)
+ return false;
+
+ dev_dbg(BOOT_DEV,
+ "handle_vs_power_switch_off_cmd_complete status %d\n", status);
+
+ /*
+ * We were waiting for this but we don't need to do anything upon
+ * reception except warn for error status
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status)
+ dev_err(BOOT_DEV,
+ "Command Complete for PowerSwitchOff received with "
+ "error 0x%X", status);
+
+ return true;
+}
+
+/**
+ * handle_vs_system_reset_cmd_complete() - Handle HCI VS SystemReset Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_system_reset_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_ACTIVATE_PATCHES_AND_SETTINGS)
+ return false;
+
+ dev_dbg(BOOT_DEV, "handle_vs_system_reset_cmd_complete status %d\n",
+ status);
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ if (dev->chip.hci_revision == CG2900_PG2_REV) {
+ /*
+ * We must now wait for the selftest results. They will
+ * take a certain amount of time to finish so start a
+ * delayed work that will then send the command.
+ */
+ dev_dbg(BOOT_DEV,
+ "New boot_state: BOOT_READ_SELFTEST_RESULT\n");
+ info->boot_state = BOOT_READ_SELFTEST_RESULT;
+ queue_delayed_work(info->wq, &info->selftest_work.work,
+ msecs_to_jiffies(SELFTEST_INITIAL));
+ info->nbr_of_polls = 0;
+ } else {
+ /*
+ * We are now almost finished. Shut off BT Core. It will
+ * be re-enabled by the Bluetooth driver when needed.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DISABLE_BT\n");
+ info->boot_state = BOOT_DISABLE_BT;
+ send_bt_enable(info, CG2900_BT_DISABLE);
+ }
+ } else {
+ dev_err(BOOT_DEV,
+ "Received Reset complete event with status 0x%X\n",
+ status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_read_selftests_cmd_complete() - Handle HCI VS ReadSelfTestsResult Command Complete event.
+ * @dev: Current chip.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_read_selftests_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ struct bt_vs_read_selftests_result_evt *evt =
+ (struct bt_vs_read_selftests_result_evt *)data;
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_READ_SELFTEST_RESULT)
+ return false;
+
+ dev_dbg(BOOT_DEV,
+ "handle_vs_read_selftests_cmd_complete status %d result %d\n",
+ evt->status, evt->result);
+
+ if (HCI_BT_ERROR_NO_ERROR != evt->status)
+ goto err_handling;
+
+ if (CG2900_BT_SELFTEST_SUCCESSFUL == evt->result ||
+ CG2900_BT_SELFTEST_FAILED == evt->result) {
+ if (CG2900_BT_SELFTEST_FAILED == evt->result)
+ dev_err(BOOT_DEV, "CG2900 self test failed\n");
+
+ /*
+ * We are now almost finished. Shut off BT Core. It will
+ * be re-enabled by the Bluetooth driver when needed.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DISABLE_BT\n");
+ info->boot_state = BOOT_DISABLE_BT;
+ send_bt_enable(info, CG2900_BT_DISABLE);
+ return true;
+ } else if (CG2900_BT_SELFTEST_NOT_COMPLETED == evt->result) {
+ /*
+ * Self tests are not yet finished. Wait some more time
+ * before resending the command
+ */
+ if (info->nbr_of_polls > MAX_NBR_OF_POLLS) {
+ dev_err(BOOT_DEV, "Selftest results reached max"
+ " number of polls\n");
+ goto err_handling;
+ }
+ queue_delayed_work(info->wq, &info->selftest_work.work,
+ msecs_to_jiffies(SELFTEST_POLLING));
+ info->nbr_of_polls++;
+ return true;
+ }
+
+err_handling:
+ dev_err(BOOT_DEV,
+ "Received Read SelfTests Result complete event with "
+ "status 0x%X and result 0x%X\n",
+ evt->status, evt->result);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ return true;
+}
+
+/**
+ * handle_vs_bt_enable_cmd_status() - Handles HCI VS BtEnable Command Status event.
+ * @status: Returned status of BtEnable command.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_bt_enable_cmd_status(struct cg2900_chip_dev *dev,
+ u8 status)
+{
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DISABLE_BT)
+ return false;
+
+ dev_dbg(BOOT_DEV, "handle_vs_bt_enable_cmd_status status %d\n", status);
+
+ /*
+ * Only do something if there is an error. Otherwise we will wait for
+ * CmdComplete.
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV,
+ "Received BtEnable status event with status 0x%X\n",
+ status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_bt_enable_cmd_complete() - Handle HCI VS BtEnable Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_bt_enable_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct cg2900_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DISABLE_BT)
+ return false;
+
+ dev_dbg(BOOT_DEV, "handle_vs_bt_enable_cmd_complete status %d\n",
+ status);
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ /*
+ * The boot sequence is now finished successfully.
+ * Set states and signal to waiting thread.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_READY\n");
+ info->boot_state = BOOT_READY;
+ chip_startup_finished(info, 0);
+ } else {
+ dev_err(BOOT_DEV,
+ "Received BtEnable complete event with status 0x%X\n",
+ status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+ }
+
+ return true;
+}
+
+/**
+ * handle_rx_data_bt_evt() - Check if received data should be handled in CG2900 chip driver.
+ * @skb: Data packet
+ *
+ * The handle_rx_data_bt_evt() function checks if received data should be
+ * handled in CG2900 chip driver. If so handle it correctly.
+ * Received data is always HCI BT Event.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_rx_data_bt_evt(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ bool pkt_handled = false;
+ /* skb cannot be NULL here so it is safe to de-reference */
+ u8 *data = skb->data;
+ struct hci_event_hdr *evt;
+ u16 op_code;
+
+ evt = (struct hci_event_hdr *)data;
+ data += sizeof(*evt);
+
+ /* First check the event code. */
+ if (HCI_EV_CMD_COMPLETE == evt->evt) {
+ struct hci_ev_cmd_complete *cmd_complete;
+
+ cmd_complete = (struct hci_ev_cmd_complete *)data;
+ op_code = le16_to_cpu(cmd_complete->opcode);
+ dev_dbg(dev->dev,
+ "Received Command Complete: op_code = 0x%04X\n",
+ op_code);
+ /* Move to first byte after OCF */
+ data += sizeof(*cmd_complete);
+
+ if (op_code == HCI_OP_RESET)
+ pkt_handled = handle_reset_cmd_complete(dev, data);
+ else if (op_code == CG2900_BT_OP_VS_STORE_IN_FS)
+ pkt_handled = handle_vs_store_in_fs_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled =
+ handle_vs_write_file_block_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_POWER_SWITCH_OFF)
+ pkt_handled =
+ handle_vs_power_switch_off_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_SYSTEM_RESET)
+ pkt_handled = handle_vs_system_reset_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_BT_ENABLE)
+ pkt_handled = handle_vs_bt_enable_cmd_complete(dev,
+ data);
+ else if (op_code == CG2900_BT_OP_VS_READ_SELTESTS_RESULT)
+ pkt_handled = handle_vs_read_selftests_cmd_complete(dev,
+ data);
+ } else if (HCI_EV_CMD_STATUS == evt->evt) {
+ struct hci_ev_cmd_status *cmd_status;
+
+ cmd_status = (struct hci_ev_cmd_status *)data;
+
+ op_code = le16_to_cpu(cmd_status->opcode);
+
+ dev_dbg(dev->dev, "Received Command Status: op_code = 0x%04X\n",
+ op_code);
+
+ if (op_code == CG2900_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled = handle_vs_write_file_block_cmd_status
+ (dev, cmd_status->status);
+ else if (op_code == CG2900_BT_OP_VS_BT_ENABLE)
+ pkt_handled = handle_vs_bt_enable_cmd_status
+ (dev, cmd_status->status);
+ } else if (HCI_EV_HW_ERROR == evt->evt) {
+ struct hci_ev_hw_error *hw_error;
+
+ hw_error = (struct hci_ev_hw_error *)data;
+ /*
+ * Only do a printout. There might be a receiving stack that can
+ * handle this event
+ */
+ dev_err(dev->dev, "HW Error event received with error 0x%02X\n",
+ hw_error->hw_code);
+ return false;
+ } else
+ return false;
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+/**
+ * transmit_skb_with_flow_ctrl_bt() - Send the BT skb to the controller if it is allowed or queue it.
+ * @user: Current user.
+ * @skb: Data packet.
+ *
+ * The transmit_skb_with_flow_ctrl_bt() function checks if there are
+ * tickets available and if so transmits buffer to controller. Otherwise the skb
+ * and user name is stored in a list for later sending.
+ * If enabled, copy the transmitted data to the HCI logger as well.
+ */
+static void transmit_skb_with_flow_ctrl_bt(struct cg2900_user_data *user,
+ struct sk_buff *skb)
+{
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct cg2900_chip_info *info = dev->c_data;
+
+ /*
+ * Because there are more users of some H4 channels (currently audio
+ * application for BT command and FM channel) we need to have an
+ * internal HCI command flow control in CG2900 driver.
+ * So check here how many tickets we have and store skb in a queue if
+ * there are no tickets left. The skb will be sent later when we get
+ * more ticket(s).
+ */
+ spin_lock_bh(&info->tx_bt_lock);
+
+ if (info->tx_nr_pkts_allowed_bt > 0) {
+ info->tx_nr_pkts_allowed_bt--;
+ dev_dbg(user->dev, "New tx_nr_pkts_allowed_bt = %d\n",
+ info->tx_nr_pkts_allowed_bt);
+
+ /*
+ * If it's command from audio app store the OpCode,
+ * it'll be used later to decide where to dispatch Command
+ * Complete event.
+ */
+ if (info->bt_audio == user) {
+ struct hci_command_hdr *hdr = (struct hci_command_hdr *)
+ (skb->data + HCI_H4_SIZE);
+
+ info->audio_bt_cmd_op = le16_to_cpu(hdr->opcode);
+ dev_dbg(user->dev,
+ "Sending cmd from audio driver, saving "
+ "OpCode = 0x%X\n",
+ info->audio_bt_cmd_op);
+ }
+
+ cg2900_tx_to_chip(user, info->logger, skb);
+ } else {
+ dev_dbg(user->dev, "Not allowed to send cmd to controller, "
+ "storing in TX queue\n");
+
+ cg2900_skb_data(skb)->user = user;
+ skb_queue_tail(&info->tx_queue_bt, skb);
+ }
+ spin_unlock_bh(&info->tx_bt_lock);
+}
+
+/**
+ * transmit_skb_with_flow_ctrl_fm() - Send the FM skb to the controller if it is allowed or queue it.
+ * @user: Current user.
+ * @skb: Data packet.
+ *
+ * The transmit_skb_with_flow_ctrl_fm() function checks if chip is available and
+ * if so transmits buffer to controller. Otherwise the skb and user name is
+ * stored in a list for later sending.
+ * Also it updates the FM radio mode if it's FM GOTOMODE command, this is needed
+ * to know how to handle some FM DO commands complete events.
+ * If enabled, copy the transmitted data to the HCI logger as well.
+ */
+static void transmit_skb_with_flow_ctrl_fm(struct cg2900_user_data *user,
+ struct sk_buff *skb)
+{
+ u8 cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ u16 cmd_id = CG2900_FM_CMD_NONE;
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct cg2900_chip_info *info = dev->c_data;
+
+ fm_parse_cmd(&(skb->data[0]), &cmd_func, &cmd_id);
+
+ /*
+ * If this is an FM IP disable or reset send command and also reset
+ * the flow control and audio user.
+ */
+ if (cmd_func == CG2900_FM_CMD_PARAM_DISABLE ||
+ cmd_func == CG2900_FM_CMD_PARAM_RESET) {
+ spin_lock_bh(&info->tx_fm_lock);
+ fm_reset_flow_ctrl(info);
+ spin_unlock_bh(&info->tx_fm_lock);
+ cg2900_tx_to_chip(user, info->logger, skb);
+ return;
+ }
+
+ /*
+ * If this is a FM user and no FM audio user command pending just send
+ * FM command. It is up to the user of the FM channel to handle its own
+ * flow control.
+ */
+ spin_lock_bh(&info->tx_fm_lock);
+ if (info->fm_audio != user &&
+ info->audio_fm_cmd_id == CG2900_FM_CMD_NONE) {
+ info->hci_fm_cmd_func = cmd_func;
+ dev_dbg(user->dev, "Sending FM radio command 0x%04X\n",
+ info->hci_fm_cmd_func);
+ /* If a GotoMode command update FM mode */
+ fm_update_mode(info, &skb->data[0]);
+ cg2900_tx_to_chip(user, info->logger, skb);
+ } else if (info->fm_audio == user &&
+ info->hci_fm_cmd_func == CG2900_FM_CMD_PARAM_NONE &&
+ info->audio_fm_cmd_id == CG2900_FM_CMD_NONE) {
+ /*
+ * If it's command from fm audio user store the command id.
+ * It'll be used later to decide where to dispatch
+ * command complete event.
+ */
+ info->audio_fm_cmd_id = cmd_id;
+ dev_dbg(user->dev, "Sending FM audio command 0x%04X\n",
+ info->audio_fm_cmd_id);
+ cg2900_tx_to_chip(user, info->logger, skb);
+ } else {
+ dev_dbg(user->dev,
+ "Not allowed to send FM cmd to controller, storing in "
+ "TX queue\n");
+
+ cg2900_skb_data(skb)->user = user;
+ skb_queue_tail(&info->tx_queue_fm, skb);
+ }
+ spin_unlock_bh(&info->tx_fm_lock);
+}
+
+/**
+ * is_bt_audio_user() - Checks if this packet is for the BT audio user.
+ * @info: CG2900 info.
+ * @h4_channel: H:4 channel for this packet.
+ * @skb: Packet to check.
+ *
+ * Returns:
+ * true if packet is for BT audio user.
+ * false otherwise.
+ */
+static bool is_bt_audio_user(struct cg2900_chip_info *info, int h4_channel,
+ const struct sk_buff * const skb)
+{
+ struct hci_event_hdr *hdr;
+ u8 *payload;
+ u16 opcode;
+
+ if (h4_channel != CHANNEL_BT_EVT)
+ return false;
+
+ hdr = (struct hci_event_hdr *)skb->data;
+ payload = (u8 *)(hdr + 1); /* follows header */
+
+ if (HCI_EV_CMD_COMPLETE == hdr->evt)
+ opcode = le16_to_cpu(
+ ((struct hci_ev_cmd_complete *)payload)->opcode);
+ else if (HCI_EV_CMD_STATUS == hdr->evt)
+ opcode = le16_to_cpu(
+ ((struct hci_ev_cmd_status *)payload)->opcode);
+ else
+ return false;
+
+ if (opcode != info->audio_bt_cmd_op)
+ return false;
+
+ dev_dbg(info->bt_audio->dev, "Audio BT OpCode match = 0x%04X\n",
+ opcode);
+ info->audio_bt_cmd_op = CG2900_BT_OPCODE_NONE;
+ return true;
+}
+
+/**
+ * is_fm_audio_user() - Checks if this packet is for the FM audio user.
+ * @info: CG2900 info.
+ * @h4_channel: H:4 channel for this packet.
+ * @skb: Packet to check.
+ *
+ * Returns:
+ * true if packet is for BT audio user.
+ * false otherwise.
+ */
+static bool is_fm_audio_user(struct cg2900_chip_info *info, int h4_channel,
+ const struct sk_buff * const skb)
+{
+ u8 cmd_func;
+ u16 cmd_id;
+ u16 irpt_val;
+ u8 event;
+
+ if (h4_channel != CHANNEL_FM_RADIO)
+ return false;
+
+ cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ cmd_id = CG2900_FM_CMD_NONE;
+ irpt_val = 0;
+ event = CG2900_FM_EVENT_UNKNOWN;
+
+ fm_parse_event(&skb->data[0], &event, &cmd_func, &cmd_id,
+ &irpt_val);
+ /* Check if command complete event FM legacy interface. */
+ if ((event == CG2900_FM_EVENT_CMD_COMPLETE) &&
+ (cmd_func == CG2900_FM_CMD_PARAM_WRITECOMMAND) &&
+ (cmd_id == info->audio_fm_cmd_id)) {
+ dev_dbg(info->fm_audio->dev,
+ "FM Audio Function Code match = 0x%04X\n",
+ cmd_id);
+ return true;
+ }
+
+ /* Check if Interrupt legacy interface. */
+ if ((event == CG2900_FM_EVENT_INTERRUPT) &&
+ (fm_is_do_cmd_irpt(irpt_val)) &&
+ (info->tx_fm_audio_awaiting_irpt))
+ return true;
+
+ return false;
+}
+
+/**
+ * data_from_chip() - Called when data is received from the chip.
+ * @dev: Chip info.
+ * @cg2900_dev: CG2900 user for this packet.
+ * @skb: Packet received.
+ *
+ * The data_from_chip() function updates flow control and checks
+ * if packet is a response for a packet it itself has transmitted. If not it
+ * finds the correct user and sends the packet* to the user.
+ */
+static void data_from_chip(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ int h4_channel;
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+ struct cg2900_chip_info *info = dev->c_data;
+ struct cg2900_user_data *user = NULL;
+
+ spin_lock_bh(&info->rw_lock);
+ /* Copy RX Data into logger.*/
+ if (info->logger)
+ cg2900_send_to_hci_logger(info->logger, skb,
+ LOGGER_DIRECTION_RX);
+
+ h4_channel = skb->data[0];
+ skb_pull(skb, HCI_H4_SIZE);
+
+ /* First check if it is a BT or FM audio event */
+ if (is_bt_audio_user(info, h4_channel, skb))
+ user = info->bt_audio;
+ else if (is_fm_audio_user(info, h4_channel, skb))
+ user = info->fm_audio;
+ spin_unlock_bh(&info->rw_lock);
+
+ /* Now check if we should update flow control */
+ if (h4_channel == CHANNEL_BT_EVT)
+ update_flow_ctrl_bt(dev, skb);
+ else if (h4_channel == CHANNEL_FM_RADIO)
+ update_flow_ctrl_fm(dev, skb);
+
+ /* Then check if this is a response to data we have sent */
+ if (h4_channel == CHANNEL_BT_EVT && handle_rx_data_bt_evt(dev, skb))
+ return;
+
+ spin_lock_bh(&info->rw_lock);
+
+ if (user)
+ goto user_found;
+
+ /* Let's see if it is the last user */
+ if (info->last_user && info->last_user->h4_channel == h4_channel) {
+ user = info->last_user;
+ goto user_found;
+ }
+
+ /* Search through the list of all open channels to find the user */
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == h4_channel) {
+ user = tmp->user;
+ goto user_found;
+ }
+ }
+
+user_found:
+ if (user != info->bt_audio && user != info->fm_audio)
+ info->last_user = user;
+
+ spin_unlock_bh(&info->rw_lock);
+
+ if (user)
+ user->read_cb(user, skb);
+ else {
+ dev_err(dev->dev,
+ "Could not find corresponding user to h4_channel %d\n",
+ h4_channel);
+ kfree_skb(skb);
+ }
+}
+
+/**
+ * chip_removed() - Called when transport has been removed.
+ * @dev: Chip device.
+ *
+ * Removes registered MFD devices and frees internal resources.
+ */
+static void chip_removed(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_chip_info *info = dev->c_data;
+
+ cancel_delayed_work(&info->selftest_work.work);
+ mfd_remove_devices(dev->dev);
+ kfree(info->settings_file_name);
+ kfree(info->patch_file_name);
+ destroy_workqueue(info->wq);
+ kfree(info);
+ dev->c_data = NULL;
+ dev->c_cb.chip_removed = NULL;
+ dev->c_cb.data_from_chip = NULL;
+}
+
+/**
+ * last_bt_user_removed() - Called when last BT user is removed.
+ * @info: Chip handler info.
+ *
+ * Clears out TX queue for BT.
+ */
+static void last_bt_user_removed(struct cg2900_chip_info *info)
+{
+ spin_lock_bh(&info->tx_bt_lock);
+ skb_queue_purge(&info->tx_queue_bt);
+
+ /*
+ * Reset number of packets allowed and number of outstanding
+ * BT commands.
+ */
+ info->tx_nr_pkts_allowed_bt = 1;
+ /* Reset the audio_bt_cmd_op. */
+ info->audio_bt_cmd_op = CG2900_BT_OPCODE_NONE;
+ spin_unlock_bh(&info->tx_bt_lock);
+}
+
+/**
+ * last_fm_user_removed() - Called when last FM user is removed.
+ * @info: Chip handler info.
+ *
+ * Clears out TX queue for BT.
+ */
+static void last_fm_user_removed(struct cg2900_chip_info *info)
+{
+ spin_lock_bh(&info->tx_fm_lock);
+ fm_reset_flow_ctrl(info);
+ spin_unlock_bh(&info->tx_fm_lock);
+}
+
+/**
+ * chip_shutdown() - Reset and power the chip off.
+ * @user: MFD device.
+ */
+static void chip_shutdown(struct cg2900_user_data *user)
+{
+ struct hci_command_hdr cmd;
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct cg2900_chip_info *info = dev->c_data;
+
+ dev_dbg(user->dev, "chip_shutdown\n");
+
+ /* First do a quick power switch of the chip to assure a good state */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, false);
+
+ /*
+ * Wait 50ms before continuing to be sure that the chip detects
+ * chip power off.
+ */
+ schedule_timeout_killable(
+ msecs_to_jiffies(LINE_TOGGLE_DETECT_TIMEOUT));
+
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait 100ms before continuing to be sure that the chip is ready */
+ schedule_timeout_killable(msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ if (user != info->bt_audio && user != info->fm_audio)
+ info->last_user = user;
+ info->user_in_charge = user;
+
+ /*
+ * Transmit HCI reset command to ensure the chip is using
+ * the correct transport and to put BT part in reset.
+ */
+ dev_dbg(user->dev, "New closing_state: CLOSING_RESET\n");
+ info->closing_state = CLOSING_RESET;
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+}
+
+/**
+ * chip_startup_finished() - Called when chip startup has finished.
+ * @info: Chip handler info.
+ * @err: Result of chip startup, 0 for no error.
+ *
+ * Shuts down the chip upon error, sets state to active, wakes waiting threads,
+ * and informs transport that startup has finished.
+ */
+static void chip_startup_finished(struct cg2900_chip_info *info, int err)
+{
+ dev_dbg(BOOT_DEV, "chip_startup_finished (%d)\n", err);
+
+ if (err)
+ /* Shutdown the chip */
+ cg2900_create_work_item(info->wq, work_chip_shutdown,
+ info->user_in_charge);
+ else {
+ dev_dbg(BOOT_DEV, "New main_state: CG2900_ACTIVE\n");
+ info->main_state = CG2900_ACTIVE;
+ }
+
+ wake_up_all(&main_wait_queue);
+
+ if (err)
+ return;
+
+ if (!info->chip_dev->t_cb.chip_startup_finished)
+ dev_dbg(BOOT_DEV, "chip_startup_finished callback not found\n");
+ else
+ info->chip_dev->t_cb.chip_startup_finished(info->chip_dev);
+}
+
+/**
+ * cg2900_open() - Called when user wants to open an H4 channel.
+ * @user: MFD device to open.
+ *
+ * Checks that H4 channel is not already opened. If chip is not started, starts
+ * up the chip. Sets channel as opened and adds user to active users.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL or read_cb is NULL.
+ * -EBUSY if chip is in transit state (being started or shutdown).
+ * -EACCES if H4 channel is already opened.
+ * -ENOMEM if allocation fails.
+ * -EIO if chip startup fails.
+ * Error codes generated by t_cb.open.
+ */
+static int cg2900_open(struct cg2900_user_data *user)
+{
+ int err;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ struct list_head *cursor;
+ struct cg2900_channel_item *tmp;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ if (!user->read_cb) {
+ dev_err(user->dev, "cg2900_open: read_cb missing\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /*
+ * Add a minor wait in order to avoid CPU blocking, looping openings.
+ * Note there will of course be no wait if we are already in the right
+ * state.
+ */
+ err = wait_event_timeout(main_wait_queue,
+ (CG2900_IDLE == info->main_state ||
+ CG2900_ACTIVE == info->main_state),
+ msecs_to_jiffies(LINE_TOGGLE_DETECT_TIMEOUT));
+ if (err <= 0) {
+ if (CG2900_INIT == info->main_state)
+ dev_err(user->dev, "Transport not opened\n");
+ else
+ dev_err(user->dev, "cg2900_open currently busy (0x%X). "
+ "Try again\n", info->main_state);
+ err = -EBUSY;
+ goto err_free_mutex;
+ }
+
+ err = 0;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user->h4_channel == user->h4_channel &&
+ tmp->user->is_audio == user->is_audio) {
+ dev_err(user->dev, "Channel %d is already opened\n",
+ user->h4_channel);
+ err = -EACCES;
+ goto err_free_mutex;
+ }
+ }
+
+ tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ dev_err(user->dev, "Could not allocate tmp\n");
+ err = -ENOMEM;
+ goto err_free_mutex;
+ }
+ tmp->user = user;
+
+ if (CG2900_ACTIVE != info->main_state &&
+ !user->chip_independent) {
+ /* Open transport and start-up the chip */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait to be sure that the chip is ready */
+ schedule_timeout_killable(
+ msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ if (dev->t_cb.open) {
+ err = dev->t_cb.open(dev);
+ if (err) {
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, false);
+ goto err_free_list_item;
+ }
+ }
+
+ /* Start the boot sequence */
+ info->user_in_charge = user;
+ if (user != info->bt_audio && user != info->fm_audio)
+ info->last_user = user;
+ dev_dbg(user->dev, "New boot_state: BOOT_GET_FILES_TO_LOAD\n");
+ info->boot_state = BOOT_GET_FILES_TO_LOAD;
+ dev_dbg(user->dev, "New main_state: CG2900_BOOTING\n");
+ info->main_state = CG2900_BOOTING;
+ cg2900_create_work_item(info->wq, work_load_patch_and_settings,
+ dev);
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to start\n");
+ wait_event_timeout(main_wait_queue,
+ (CG2900_ACTIVE == info->main_state ||
+ CG2900_IDLE == info->main_state),
+ msecs_to_jiffies(CHIP_STARTUP_TIMEOUT));
+ if (CG2900_ACTIVE != info->main_state) {
+ dev_err(user->dev, "CG2900 driver failed to start\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+ err = -EIO;
+ goto err_free_list_item;
+ }
+ }
+
+ list_add_tail(&tmp->list, &info->open_channels);
+
+ user->opened = true;
+
+ dev_dbg(user->dev, "H:4 channel opened\n");
+
+ mutex_unlock(&main_info->man_mutex);
+ return 0;
+err_free_list_item:
+ kfree(tmp);
+err_free_mutex:
+ mutex_unlock(&main_info->man_mutex);
+ return err;
+}
+
+/**
+ * cg2900_hci_log_open() - Called when user wants to open HCI logger channel.
+ * @user: MFD device to open.
+ *
+ * Registers user as hci_logger and calls @cg2900_open to open the channel.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ * -EACCES if H4 channel is already opened.
+ * Error codes generated by cg2900_open.
+ */
+static int cg2900_hci_log_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_hci_log_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_hci_log_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->logger) {
+ dev_err(user->dev, "HCI Logger already stored\n");
+ return -EACCES;
+ }
+
+ info->logger = user;
+ err = cg2900_open(user);
+ if (err)
+ info->logger = NULL;
+ return err;
+}
+
+/**
+ * cg2900_bt_audio_open() - Called when user wants to open BT audio channel.
+ * @user: MFD device to open.
+ *
+ * Registers user as bt_audio and calls @cg2900_open to open the channel.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ * -EACCES if H4 channel is already opened.
+ * Error codes generated by cg2900_open.
+ */
+static int cg2900_bt_audio_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_bt_audio_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_bt_audio_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->bt_audio) {
+ dev_err(user->dev, "BT Audio already stored\n");
+ return -EACCES;
+ }
+
+ info->bt_audio = user;
+ err = cg2900_open(user);
+ if (err)
+ info->bt_audio = NULL;
+ return err;
+}
+
+/**
+ * cg2900_fm_audio_open() - Called when user wants to open FM audio channel.
+ * @user: MFD device to open.
+ *
+ * Registers user as fm_audio and calls @cg2900_open to open the channel.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ * -EACCES if H4 channel is already opened.
+ * Error codes generated by cg2900_open.
+ */
+static int cg2900_fm_audio_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_fm_audio_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "cg2900_fm_audio_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->fm_audio) {
+ dev_err(user->dev, "FM Audio already stored\n");
+ return -EACCES;
+ }
+
+ info->fm_audio = user;
+ err = cg2900_open(user);
+ if (err)
+ info->fm_audio = NULL;
+ return err;
+}
+
+/**
+ * cg2900_close() - Called when user wants to close an H4 channel.
+ * @user: MFD device to close.
+ *
+ * Clears up internal resources, sets channel as closed, and shuts down chip if
+ * this was the last user.
+ */
+static void cg2900_close(struct cg2900_user_data *user)
+{
+ bool keep_powered = false;
+ struct list_head *cursor, *next;
+ struct cg2900_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /*
+ * Go through each open channel. Remove our channel and check if there
+ * is any other channel that want to keep the chip running
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ if (tmp->user == user) {
+ list_del(cursor);
+ kfree(tmp);
+ } else if (!tmp->user->chip_independent)
+ keep_powered = true;
+ }
+
+ if (user->h4_channel == CHANNEL_BT_CMD && !bt_is_open(info))
+ last_bt_user_removed(info);
+ else if (user->h4_channel == CHANNEL_FM_RADIO && !fm_is_open(info))
+ last_fm_user_removed(info);
+
+ if (keep_powered)
+ /* This was not the last user, we're done. */
+ goto finished;
+
+ if (CG2900_IDLE == info->main_state)
+ /* Chip has already been shut down. */
+ goto finished;
+
+ dev_dbg(user->dev, "New main_state: CG2900_CLOSING\n");
+ info->main_state = CG2900_CLOSING;
+ chip_shutdown(user);
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to shut-down\n");
+ wait_event_timeout(main_wait_queue,
+ (CG2900_IDLE == info->main_state),
+ msecs_to_jiffies(CHIP_SHUTDOWN_TIMEOUT));
+
+ /* Force shutdown if we timed out */
+ if (CG2900_IDLE != info->main_state) {
+ dev_err(user->dev,
+ "ST-Ericsson CG2900 Core Driver was shut-down with "
+ "problems\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+ }
+
+finished:
+ mutex_unlock(&main_info->man_mutex);
+ user->opened = false;
+ dev_dbg(user->dev, "H:4 channel closed\n");
+}
+
+/**
+ * cg2900_hci_log_close() - Called when user wants to close HCI logger channel.
+ * @user: MFD device to close.
+ *
+ * Clears hci_logger user and calls @cg2900_close to close the channel.
+ */
+static void cg2900_hci_log_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_hci_log_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_hci_log_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (user != info->logger) {
+ dev_err(user->dev, "cg2900_hci_log_close: Trying to remove "
+ "another user\n");
+ return;
+ }
+
+ info->logger = NULL;
+ cg2900_close(user);
+}
+
+/**
+ * cg2900_bt_audio_close() - Called when user wants to close BT audio channel.
+ * @user: MFD device to close.
+ *
+ * Clears bt_audio user and calls @cg2900_close to close the channel.
+ */
+static void cg2900_bt_audio_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_bt_audio_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_bt_audio_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (user != info->bt_audio) {
+ dev_err(user->dev, "cg2900_bt_audio_close: Trying to remove "
+ "another user\n");
+ return;
+ }
+
+ info->bt_audio = NULL;
+ cg2900_close(user);
+}
+
+/**
+ * cg2900_fm_audio_close() - Called when user wants to close FM audio channel.
+ * @user: MFD device to close.
+ *
+ * Clears fm_audio user and calls @cg2900_close to close the channel.
+ */
+static void cg2900_fm_audio_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "cg2900_fm_audio_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "cg2900_fm_audio_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (user != info->fm_audio) {
+ dev_err(user->dev, "cg2900_fm_audio_close: Trying to remove "
+ "another user\n");
+ return;
+ }
+
+ info->fm_audio = NULL;
+ cg2900_close(user);
+}
+
+/**
+ * cg2900_reset() - Called when user wants to reset the chip.
+ * @user: MFD device to reset.
+ *
+ * Closes down the chip and calls reset_cb for all open users.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user is NULL.
+ */
+static int cg2900_reset(struct cg2900_user_data *user)
+{
+ struct list_head *cursor, *next;
+ struct cg2900_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_reset: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_info(user->dev, "cg2900_reset\n");
+
+ BUG_ON(!main_info);
+
+ mutex_lock(&main_info->man_mutex);
+
+ dev_dbg(user->dev, "New main_state: CG2900_RESETING\n");
+ info->main_state = CG2900_RESETING;
+
+ chip_shutdown(user);
+
+ /*
+ * Inform all opened channels about the reset and free the user devices
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct cg2900_channel_item, list);
+ list_del(cursor);
+ tmp->user->opened = false;
+ tmp->user->reset_cb(tmp->user);
+ kfree(tmp);
+ }
+
+ /* Reset finished. We are now idle until first channel is opened */
+ dev_dbg(user->dev, "New main_state: CG2900_IDLE\n");
+ info->main_state = CG2900_IDLE;
+
+ mutex_unlock(&main_info->man_mutex);
+
+ /*
+ * Send wake-up since this might have been called from a failed boot.
+ * No harm done if it is a CG2900 chip user who called.
+ */
+ wake_up_all(&main_wait_queue);
+
+ return 0;
+}
+
+/**
+ * cg2900_alloc_skb() - Allocates socket buffer.
+ * @size: Sk_buffer size in bytes.
+ * @priority: GFP priorit for allocation.
+ *
+ * Allocates a sk_buffer and reserves space for H4 header.
+ *
+ * Returns:
+ * sk_buffer if success.
+ * NULL if allocation fails.
+ */
+static struct sk_buff *cg2900_alloc_skb(unsigned int size, gfp_t priority)
+{
+ struct sk_buff *skb;
+
+ dev_dbg(MAIN_DEV, "cg2900_alloc_skb size %d bytes\n", size);
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(size + CG2900_SKB_RESERVE, priority);
+ if (skb)
+ skb_reserve(skb, CG2900_SKB_RESERVE);
+
+ return skb;
+}
+
+/**
+ * cg2900_write() - Called when user wants to write to the chip.
+ * @user: MFD device representing H4 channel to write to.
+ * @skb: Sk_buffer to transmit.
+ *
+ * Transmits the sk_buffer to the chip. If it is a BT cmd or FM audio packet it
+ * is checked that it is allowed to transmit the chip.
+ * Note that if error is returned it is up to the user to free the skb.
+ *
+ * Returns:
+ * 0 if success.
+ * -EINVAL if user or skb is NULL.
+ * -EACCES if channel is closed.
+ */
+static int cg2900_write(struct cg2900_user_data *user, struct sk_buff *skb)
+{
+ u8 *h4_header;
+ struct cg2900_chip_dev *dev;
+ struct cg2900_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_write: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ if (!skb) {
+ dev_err(user->dev, "cg2900_write with no sk_buffer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_dbg(user->dev, "cg2900_write length %d bytes\n", skb->len);
+
+ if (!user->opened) {
+ dev_err(user->dev,
+ "Trying to transmit data on a closed channel\n");
+ return -EACCES;
+ }
+
+ /*
+ * Move the data pointer to the H:4 header position and
+ * store the H4 header.
+ */
+ h4_header = skb_push(skb, CG2900_SKB_RESERVE);
+ *h4_header = (u8)user->h4_channel;
+
+ if (user->h4_channel == CHANNEL_BT_CMD)
+ transmit_skb_with_flow_ctrl_bt(user, skb);
+ else if (user->h4_channel == CHANNEL_FM_RADIO)
+ transmit_skb_with_flow_ctrl_fm(user, skb);
+ else
+ cg2900_tx_to_chip(user, info->logger, skb);
+
+ return 0;
+}
+
+/**
+ * cg2900_no_write() - Used for channels where it is not allowed to write.
+ * @user: MFD device representing H4 channel to write to.
+ * @skb: Sk_buffer to transmit.
+ *
+ * Returns:
+ * -EPERM.
+ */
+static int cg2900_no_write(struct cg2900_user_data *user,
+ __attribute__((unused)) struct sk_buff *skb)
+{
+ dev_err(user->dev, "Not allowed to send on this channel\n");
+ return -EPERM;
+}
+
+/**
+ * cg2900_get_local_revision() - Called to retrieve revision data for the chip.
+ * @user: MFD device to check.
+ * @rev_data: Revision data to fill in.
+ *
+ * Returns:
+ * true if success.
+ * false upon failure.
+ */
+static bool cg2900_get_local_revision(struct cg2900_user_data *user,
+ struct cg2900_rev_data *rev_data)
+{
+ struct cg2900_chip_dev *dev;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "cg2900_get_local_revision: Calling with "
+ "NULL pointer\n");
+ return false;
+ }
+
+ if (!rev_data) {
+ dev_err(user->dev, "Calling with rev_data NULL\n");
+ return false;
+ }
+
+ dev = cg2900_get_prv(user);
+
+ rev_data->revision = dev->chip.hci_revision;
+ rev_data->sub_version = dev->chip.hci_sub_version;
+
+ return true;
+}
+
+static struct cg2900_user_data btcmd_data = {
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data btacl_data = {
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data btevt_data = {
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data fm_data = {
+ .h4_channel = CHANNEL_FM_RADIO,
+};
+static struct cg2900_user_data gnss_data = {
+ .h4_channel = CHANNEL_GNSS,
+};
+static struct cg2900_user_data debug_data = {
+ .h4_channel = CHANNEL_DEBUG,
+};
+static struct cg2900_user_data ste_tools_data = {
+ .h4_channel = CHANNEL_STE_TOOLS,
+};
+static struct cg2900_user_data hci_logger_data = {
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = cg2900_no_write,
+ .open = cg2900_hci_log_open,
+ .close = cg2900_hci_log_close,
+};
+static struct cg2900_user_data core_data = {
+ .h4_channel = CHANNEL_CORE,
+ .write = cg2900_no_write,
+};
+static struct cg2900_user_data audio_bt_data = {
+ .h4_channel = CHANNEL_BT_CMD,
+ .is_audio = true,
+ .open = cg2900_bt_audio_open,
+ .close = cg2900_bt_audio_close,
+};
+static struct cg2900_user_data audio_fm_data = {
+ .h4_channel = CHANNEL_FM_RADIO,
+ .is_audio = true,
+ .open = cg2900_fm_audio_open,
+ .close = cg2900_fm_audio_close,
+};
+
+static struct mfd_cell cg2900_devs[] = {
+ {
+ .name = "cg2900-btcmd",
+ .platform_data = &btcmd_data,
+ .pdata_size = sizeof(btcmd_data),
+ },
+ {
+ .name = "cg2900-btacl",
+ .platform_data = &btacl_data,
+ .pdata_size = sizeof(btacl_data),
+ },
+ {
+ .name = "cg2900-btevt",
+ .platform_data = &btevt_data,
+ .pdata_size = sizeof(btevt_data),
+ },
+ {
+ .name = "cg2900-fm",
+ .platform_data = &fm_data,
+ .pdata_size = sizeof(fm_data),
+ },
+ {
+ .name = "cg2900-gnss",
+ .platform_data = &gnss_data,
+ .pdata_size = sizeof(gnss_data),
+ },
+ {
+ .name = "cg2900-debug",
+ .platform_data = &debug_data,
+ .pdata_size = sizeof(debug_data),
+ },
+ {
+ .name = "cg2900-stetools",
+ .platform_data = &ste_tools_data,
+ .pdata_size = sizeof(ste_tools_data),
+ },
+ {
+ .name = "cg2900-hcilogger",
+ .platform_data = &hci_logger_data,
+ .pdata_size = sizeof(hci_logger_data),
+ },
+ {
+ .name = "cg2900-core",
+ .platform_data = &core_data,
+ .pdata_size = sizeof(core_data),
+ },
+ {
+ .name = "cg2900-audiobt",
+ .platform_data = &audio_bt_data,
+ .pdata_size = sizeof(audio_bt_data),
+ },
+ {
+ .name = "cg2900-audiofm",
+ .platform_data = &audio_fm_data,
+ .pdata_size = sizeof(audio_fm_data),
+ },
+};
+
+static struct cg2900_user_data char_btcmd_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_CMD,
+ },
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data char_btacl_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_ACL,
+ },
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data char_btevt_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_EVT,
+ },
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data char_fm_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_FM_RADIO,
+ },
+ .h4_channel = CHANNEL_FM_RADIO,
+};
+static struct cg2900_user_data char_gnss_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_GNSS,
+ },
+ .h4_channel = CHANNEL_GNSS,
+};
+static struct cg2900_user_data char_debug_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_DEBUG,
+ },
+ .h4_channel = CHANNEL_DEBUG,
+};
+static struct cg2900_user_data char_ste_tools_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_STE_TOOLS,
+ },
+ .h4_channel = CHANNEL_STE_TOOLS,
+};
+static struct cg2900_user_data char_hci_logger_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_HCI_LOGGER,
+ },
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = cg2900_no_write,
+ .open = cg2900_hci_log_open,
+ .close = cg2900_hci_log_close,
+};
+static struct cg2900_user_data char_core_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_CORE,
+ },
+ .h4_channel = CHANNEL_CORE,
+ .write = cg2900_no_write,
+};
+static struct cg2900_user_data char_audio_bt_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_BT_AUDIO,
+ },
+ .h4_channel = CHANNEL_BT_CMD,
+ .is_audio = true,
+};
+static struct cg2900_user_data char_audio_fm_data = {
+ .channel_data = {
+ .char_dev_name = CG2900_FM_AUDIO,
+ },
+ .h4_channel = CHANNEL_FM_RADIO,
+ .is_audio = true,
+};
+
+static struct mfd_cell cg2900_char_devs[] = {
+ {
+ .name = "cg2900-chardev",
+ .id = 0,
+ .platform_data = &char_btcmd_data,
+ .pdata_size = sizeof(char_btcmd_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 1,
+ .platform_data = &char_btacl_data,
+ .pdata_size = sizeof(char_btacl_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 2,
+ .platform_data = &char_btevt_data,
+ .pdata_size = sizeof(char_btevt_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 3,
+ .platform_data = &char_fm_data,
+ .pdata_size = sizeof(char_fm_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 4,
+ .platform_data = &char_gnss_data,
+ .pdata_size = sizeof(char_gnss_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 5,
+ .platform_data = &char_debug_data,
+ .pdata_size = sizeof(char_debug_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 6,
+ .platform_data = &char_ste_tools_data,
+ .pdata_size = sizeof(char_ste_tools_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 7,
+ .platform_data = &char_hci_logger_data,
+ .pdata_size = sizeof(char_hci_logger_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 8,
+ .platform_data = &char_core_data,
+ .pdata_size = sizeof(char_core_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 9,
+ .platform_data = &char_audio_bt_data,
+ .pdata_size = sizeof(char_audio_bt_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 10,
+ .platform_data = &char_audio_fm_data,
+ .pdata_size = sizeof(char_audio_fm_data),
+ },
+};
+
+/**
+ * set_plat_data() - Initializes data for an MFD cell.
+ * @cell: MFD cell.
+ * @dev: Current chip.
+ *
+ * Sets each callback to default function unless already set.
+ */
+static void set_plat_data(struct mfd_cell *cell, struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *pf_data = cell->platform_data;
+
+ if (!pf_data->open)
+ pf_data->open = cg2900_open;
+ if (!pf_data->close)
+ pf_data->close = cg2900_close;
+ if (!pf_data->reset)
+ pf_data->reset = cg2900_reset;
+ if (!pf_data->alloc_skb)
+ pf_data->alloc_skb = cg2900_alloc_skb;
+ if (!pf_data->write)
+ pf_data->write = cg2900_write;
+ if (!pf_data->get_local_revision)
+ pf_data->get_local_revision = cg2900_get_local_revision;
+
+ cg2900_set_prv(pf_data, dev);
+}
+
+/**
+ * check_chip_support() - Checks if connected chip is handled by this driver.
+ * @dev: Chip info structure.
+ *
+ * First check if chip is supported by this driver. If that is the case fill in
+ * the callbacks in @dev and initiate internal variables. Finally create MFD
+ * devices for all supported H4 channels. When finished power off the chip.
+ *
+ * Returns:
+ * true if chip is handled by this driver.
+ * false otherwise.
+ */
+static bool check_chip_support(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_platform_data *pf_data;
+ struct cg2900_chip_info *info;
+ int i;
+ int err;
+
+ dev_dbg(dev->dev, "check_chip_support\n");
+
+ /*
+ * Check if this is a CG2900 revision.
+ * We do not care about the sub-version at the moment. Change this if
+ * necessary.
+ */
+ if ((dev->chip.manufacturer != CG2900_SUPP_MANUFACTURER) ||
+ (dev->chip.hci_revision != CG2900_PG1_SPECIAL_REV &&
+ (dev->chip.hci_revision < CG2900_SUPP_REVISION_MIN ||
+ dev->chip.hci_revision > CG2900_SUPP_REVISION_MAX))) {
+ dev_dbg(dev->dev, "Chip not supported by CG2900 driver\n"
+ "\tMan: 0x%02X\n"
+ "\tRev: 0x%04X\n"
+ "\tSub: 0x%04X\n",
+ dev->chip.manufacturer, dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ return false;
+ }
+
+ /* Store needed data */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Couldn't allocate info struct\n");
+ return false;
+ }
+
+ /* Initialize all variables */
+ skb_queue_head_init(&info->tx_queue_bt);
+ skb_queue_head_init(&info->tx_queue_fm);
+
+ INIT_LIST_HEAD(&info->open_channels);
+
+ spin_lock_init(&info->tx_bt_lock);
+ spin_lock_init(&info->tx_fm_lock);
+ spin_lock_init(&info->rw_lock);
+
+ info->tx_nr_pkts_allowed_bt = 1;
+ info->audio_bt_cmd_op = CG2900_BT_OPCODE_NONE;
+ info->audio_fm_cmd_id = CG2900_FM_CMD_NONE;
+ info->hci_fm_cmd_func = CG2900_FM_CMD_PARAM_NONE;
+ info->fm_radio_mode = FM_RADIO_MODE_IDLE;
+ info->chip_dev = dev;
+ info->dev = dev->dev;
+
+ info->wq = create_singlethread_workqueue(WQ_NAME);
+ if (!info->wq) {
+ dev_err(dev->dev, "Could not create workqueue\n");
+ goto err_handling_free_info;
+ }
+
+ info->patch_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->patch_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffer for patch file\n");
+ goto err_handling_destroy_wq;
+ }
+
+ info->settings_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->settings_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffers settings file\n");
+ goto err_handling_free_patch_name;
+ }
+
+ info->selftest_work.data = info;
+ INIT_DELAYED_WORK(&info->selftest_work.work,
+ work_send_read_selftest_cmd);
+
+ dev->c_data = info;
+ /* Set the callbacks */
+ dev->c_cb.data_from_chip = data_from_chip;
+ dev->c_cb.chip_removed = chip_removed;
+
+ mutex_lock(&main_info->man_mutex);
+
+ pf_data = dev_get_platdata(dev->dev);
+ btcmd_data.channel_data.bt_bus = pf_data->bus;
+ btacl_data.channel_data.bt_bus = pf_data->bus;
+ btevt_data.channel_data.bt_bus = pf_data->bus;
+
+ for (i = 0; i < ARRAY_SIZE(cg2900_devs); i++)
+ set_plat_data(&cg2900_devs[i], dev);
+ for (i = 0; i < ARRAY_SIZE(cg2900_char_devs); i++)
+ set_plat_data(&cg2900_char_devs[i], dev);
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id, cg2900_devs,
+ ARRAY_SIZE(cg2900_devs), NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add cg2900_devs (%d)\n", err);
+ goto err_handling_free_settings_name;
+ }
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id,
+ cg2900_char_devs, ARRAY_SIZE(cg2900_char_devs),
+ NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add cg2900_char_devs (%d)\n", err);
+ goto err_handling_remove_devs;
+ }
+
+ main_info->cell_base_id += 30;
+ mutex_unlock(&main_info->man_mutex);
+
+ dev_info(dev->dev, "Chip supported by the CG2900 chip driver\n");
+
+ /* Finish by turning off the chip */
+ cg2900_create_work_item(info->wq, work_power_off_chip, dev);
+
+ return true;
+
+err_handling_remove_devs:
+ mfd_remove_devices(dev->dev);
+err_handling_free_settings_name:
+ kfree(info->settings_file_name);
+ mutex_unlock(&main_info->man_mutex);
+err_handling_free_patch_name:
+ kfree(info->patch_file_name);
+err_handling_destroy_wq:
+ destroy_workqueue(info->wq);
+err_handling_free_info:
+ kfree(info);
+ return false;
+}
+
+static struct cg2900_id_callbacks chip_support_callbacks = {
+ .check_chip_support = check_chip_support,
+};
+
+/**
+ * cg2900_chip_probe() - Initialize CG2900 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * This function initializes the CG2900 driver, then registers to
+ * the CG2900 Core.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * Error codes generated by cg2900_register_chip_driver.
+ */
+static int __devinit cg2900_chip_probe(struct platform_device *pdev)
+{
+ int err;
+
+ dev_dbg(&pdev->dev, "cg2900_chip_probe\n");
+
+ main_info = kzalloc(sizeof(*main_info), GFP_ATOMIC);
+ if (!main_info) {
+ dev_err(&pdev->dev, "Couldn't allocate main_info\n");
+ return -ENOMEM;
+ }
+
+ main_info->dev = &pdev->dev;
+ mutex_init(&main_info->man_mutex);
+
+ err = cg2900_register_chip_driver(&chip_support_callbacks);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Couldn't register chip driver (%d)\n", err);
+ goto error_handling;
+ }
+
+ dev_info(&pdev->dev, "CG2900 chip driver started\n");
+
+ return 0;
+
+error_handling:
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return err;
+}
+
+/**
+ * cg2900_chip_remove() - Release CG2900 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success (always success).
+ */
+static int __devexit cg2900_chip_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "CG2900 chip driver removed\n");
+
+ cg2900_deregister_chip_driver(&chip_support_callbacks);
+
+ if (!main_info)
+ return 0;
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return 0;
+}
+
+static struct platform_driver cg2900_chip_driver = {
+ .driver = {
+ .name = "cg2900-chip",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_chip_probe,
+ .remove = __devexit_p(cg2900_chip_remove),
+};
+
+/**
+ * cg2900_chip_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_chip_init(void)
+{
+ pr_debug("cg2900_chip_init");
+ return platform_driver_register(&cg2900_chip_driver);
+}
+
+/**
+ * cg2900_chip_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_chip_exit(void)
+{
+ pr_debug("cg2900_chip_exit");
+ platform_driver_unregister(&cg2900_chip_driver);
+}
+
+module_init(cg2900_chip_init);
+module_exit(cg2900_chip_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux CG2900 Connectivity Device Driver");
diff --git a/drivers/staging/cg2900/mfd/cg2900_chip.h b/drivers/staging/cg2900/mfd/cg2900_chip.h
new file mode 100644
index 0000000..8860159
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_chip.h
@@ -0,0 +1,613 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+
+#ifndef _CG2900_CHIP_H_
+#define _CG2900_CHIP_H_
+
+/*
+ * Utility
+ */
+
+static inline void set_low_nibble(__u8 *var, __u8 value)
+{
+ *var = (*var & 0xf0) | (value & 0x0f);
+}
+
+static inline void set_high_nibble(__u8 *var, __u8 value)
+{
+ *var = (*var & 0x0f) | (value << 4);
+}
+
+static inline void store_bit(__u8 *var, size_t bit, __u8 value)
+{
+ *var = (*var & ~(1u << bit)) | (value << bit);
+}
+
+/*
+ * General chip defines
+ */
+
+/* Supported chips */
+#define CG2900_SUPP_MANUFACTURER 0x30
+#define CG2900_SUPP_REVISION_MIN 0x0100
+#define CG2900_SUPP_REVISION_MAX 0x0200
+
+/* Specific chip version data */
+#define CG2900_PG1_REV 0x0101
+#define CG2900_PG2_REV 0x0200
+#define CG2900_PG1_SPECIAL_REV 0x0700
+
+/*
+ * Bluetooth
+ */
+
+#define BT_SIZE_OF_HDR (sizeof(__le16) + sizeof(__u8))
+#define BT_PARAM_LEN(__pkt_len) (__pkt_len - BT_SIZE_OF_HDR)
+
+struct bt_cmd_cmpl_event {
+ __u8 eventcode;
+ __u8 plen;
+ __u8 n_commands;
+ __le16 opcode;
+ /*
+ * According to BT-specification what follows is "parameters"
+ * and unique to every command, but all commands start the
+ * parameters with the status field so include it here for
+ * convenience
+ */
+ __u8 status;
+ __u8 data[];
+} __packed;
+
+/* BT VS Store In FS command */
+#define CG2900_BT_OP_VS_STORE_IN_FS 0xFC22
+struct bt_vs_store_in_fs_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 user_id;
+ __u8 len;
+ __u8 data[];
+} __packed;
+
+#define CG2900_VS_STORE_IN_FS_USR_ID_BD_ADDR 0xFE
+
+/* BT VS Write File Block command */
+#define CG2900_BT_OP_VS_WRITE_FILE_BLOCK 0xFC2E
+struct bt_vs_write_file_block_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 data[];
+} __packed;
+
+#define CG2900_BT_DISABLE 0x00
+#define CG2900_BT_ENABLE 0x01
+
+/* BT VS BT Enable command */
+#define CG2900_BT_OP_VS_BT_ENABLE 0xFF10
+struct bt_vs_bt_enable_cmd {
+ __le16 op_code;
+ u8 plen;
+ u8 enable;
+} __packed;
+
+/* Bytes in the command Hci_Cmd_ST_Set_Uart_Baud_Rate */
+#define CG2900_BAUD_RATE_57600 0x03
+#define CG2900_BAUD_RATE_115200 0x02
+#define CG2900_BAUD_RATE_230400 0x01
+#define CG2900_BAUD_RATE_460800 0x00
+#define CG2900_BAUD_RATE_921600 0x20
+#define CG2900_BAUD_RATE_2000000 0x25
+#define CG2900_BAUD_RATE_3000000 0x27
+#define CG2900_BAUD_RATE_4000000 0x2B
+
+/* BT VS SetBaudRate command */
+#define CG2900_BT_OP_VS_SET_BAUD_RATE 0xFC09
+struct bt_vs_set_baud_rate_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 baud_rate;
+} __packed;
+
+#define CG2900_BT_SELFTEST_SUCCESSFUL 0x00
+#define CG2900_BT_SELFTEST_FAILED 0x01
+#define CG2900_BT_SELFTEST_NOT_COMPLETED 0x02
+
+/* BT VS ReadSelfTestsResult command & event */
+#define CG2900_BT_OP_VS_READ_SELTESTS_RESULT 0xFC10
+struct bt_vs_read_selftests_result_evt {
+ __u8 status;
+ __u8 result;
+} __packed;
+
+/* Bluetooth Vendor Specific Opcodes */
+#define CG2900_BT_OP_VS_POWER_SWITCH_OFF 0xFD40
+#define CG2900_BT_OP_VS_SYSTEM_RESET 0xFF12
+
+#define CG2900_BT_OPCODE_NONE 0xFFFF
+
+/*
+ * Common multimedia
+ */
+
+#define CG2900_CODEC_TYPE_NONE 0x00
+#define CG2900_CODEC_TYPE_SBC 0x01
+
+#define CG2900_PCM_MODE_SLAVE 0x00
+#define CG2900_PCM_MODE_MASTER 0x01
+
+#define CG2900_I2S_MODE_MASTER 0x00
+#define CG2900_I2S_MODE_SLAVE 0x01
+
+/*
+ * CG2900 PG1 multimedia API
+ */
+
+#define CG2900_BT_VP_TYPE_PCM 0x00
+#define CG2900_BT_VP_TYPE_I2S 0x01
+#define CG2900_BT_VP_TYPE_SLIMBUS 0x02
+#define CG2900_BT_VP_TYPE_FM 0x03
+#define CG2900_BT_VP_TYPE_BT_SCO 0x04
+#define CG2900_BT_VP_TYPE_BT_A2DP 0x05
+#define CG2900_BT_VP_TYPE_ANALOG 0x07
+
+#define CG2900_BT_VS_SET_HARDWARE_CONFIG 0xFD54
+/* These don't have the same length, so a union won't work */
+struct bt_vs_set_hw_cfg_cmd_pcm {
+ __le16 opcode;
+ __u8 plen;
+ __u8 vp_type;
+ __u8 port_id;
+ __u8 mode_dir; /* NB: mode is in bit 1 (not 0) */
+ __u8 bit_clock;
+ __le16 frame_len;
+} __packed;
+#define HWCONFIG_PCM_SET_MODE(pcfg, mode) \
+ set_low_nibble(&(pcfg)->mode_dir, (mode) << 1)
+#define HWCONFIG_PCM_SET_DIR(pcfg, idx, dir) \
+ store_bit(&(pcfg)->mode_dir, (idx) + 4, (dir))
+
+struct bt_vs_set_hw_cfg_cmd_i2s {
+ __le16 opcode;
+ __u8 plen;
+ __u8 vp_type;
+ __u8 port_id;
+ __u8 half_period;
+ __u8 master_slave;
+} __packed;
+
+/* Max length for allocating */
+#define CG2900_BT_LEN_VS_SET_HARDWARE_CONFIG \
+ (sizeof(struct bt_vs_set_hw_cfg_cmd_pcm))
+
+#define CG2900_BT_VS_SET_SESSION_CONFIG 0xFD55
+struct session_config_vport {
+ __u8 type;
+ union {
+ struct {
+ __le16 acl_handle;
+ __u8 reserved[10];
+ } sco;
+ struct {
+ __u8 reserved[12];
+ } fm;
+ struct {
+ __u8 index;
+ __u8 slots_used;
+ __u8 slot_start[4];
+ __u8 reserved[6];
+ } pcm;
+ struct {
+ __u8 index;
+ __u8 channel;
+ __u8 reserved[10];
+ } i2s;
+ };
+} __packed;
+#define SESSIONCFG_PCM_SET_USED(port, idx, use) \
+ store_bit(&(port).pcm.slots_used, (idx), (use))
+
+struct session_config_stream {
+ __u8 media_type;
+ __u8 csel_srate;
+ __u8 codec_type;
+ __u8 codec_mode;
+ __u8 codec_params[3];
+ struct session_config_vport inport;
+ struct session_config_vport outport;
+} __packed;
+#define SESSIONCFG_SET_CHANNELS(pcfg, chnl) \
+ set_low_nibble(&(pcfg)->csel_srate, (chnl))
+#define SESSIONCFG_I2S_SET_SRATE(pcfg, rate) \
+ set_high_nibble(&(pcfg)->csel_srate, (rate))
+
+struct bt_vs_session_config_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 n_streams; /* we only support one here */
+ struct session_config_stream stream;
+} __packed;
+
+#define CG2900_BT_SESSION_MEDIA_TYPE_AUDIO 0x00
+
+#define CG2900_BT_SESSION_RATE_8K 0x01
+#define CG2900_BT_SESSION_RATE_16K 0x02
+#define CG2900_BT_SESSION_RATE_44_1K 0x04
+#define CG2900_BT_SESSION_RATE_48K 0x05
+
+#define CG2900_BT_MEDIA_CONFIG_MONO 0x00
+#define CG2900_BT_MEDIA_CONFIG_STEREO 0x01
+#define CG2900_BT_MEDIA_CONFIG_JOINT_STEREO 0x02
+#define CG2900_BT_MEDIA_CONFIG_DUAL_CHANNEL 0x03
+
+#define CG2900_BT_SESSION_I2S_INDEX_I2S 0x00
+#define CG2900_BT_SESSION_PCM_INDEX_PCM_I2S 0x00
+
+
+#define CG2900_BT_VS_SESSION_CTRL 0xFD57
+struct bt_vs_session_ctrl_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 control;
+} __packed;
+
+#define CG2900_BT_SESSION_START 0x00
+#define CG2900_BT_SESSION_STOP 0x01
+#define CG2900_BT_SESSION_PAUSE 0x02
+#define CG2900_BT_SESSION_RESUME 0x03
+
+#define CG2900_BT_VS_RESET_SESSION_CONFIG 0xFD56
+struct bt_vs_reset_session_cfg_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+} __packed;
+
+/*
+ * CG2900 PG2 multimedia API
+ */
+
+#define CG2900_MC_PORT_PCM_I2S 0x00
+#define CG2900_MC_PORT_I2S 0x01
+#define CG2900_MC_PORT_BT_SCO 0x04
+#define CG2900_MC_PORT_FM_RX_0 0x07
+#define CG2900_MC_PORT_FM_RX_1 0x08
+#define CG2900_MC_PORT_FM_TX 0x09
+
+#define CG2900_MC_VS_PORT_CONFIG 0xFD64
+struct mc_vs_port_cfg_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 type;
+ /*
+ * one of the following configuration structs should follow, but they
+ * have different lengths so a union will not work
+ */
+} __packed;
+
+struct mc_vs_port_cfg_pcm_i2s {
+ __u8 role_dir;
+ __u8 sco_a2dp_slots_used;
+ __u8 fm_slots_used;
+ __u8 ring_slots_used;
+ __u8 slot_start[4];
+ __u8 ratio_mode;
+ __u8 frame_len;
+ __u8 bitclk_srate;
+} __packed;
+#define PORTCFG_PCM_SET_ROLE(cfg, role) \
+ set_low_nibble(&(cfg).role_dir, (role))
+#define PORTCFG_PCM_SET_DIR(cfg, idx, dir) \
+ store_bit(&(cfg).role_dir, (idx) + 4, (dir))
+static inline void portcfg_pcm_set_sco_used(struct mc_vs_port_cfg_pcm_i2s *cfg,
+ size_t index, __u8 use)
+{
+ if (use) {
+ /* clear corresponding slot in all cases */
+ cfg->sco_a2dp_slots_used &= ~(0x11 << index);
+ cfg->fm_slots_used &= ~(0x11 << index);
+ cfg->ring_slots_used &= ~(0x11 << index);
+ /* set for sco */
+ cfg->sco_a2dp_slots_used |= (1u << index);
+ } else {
+ /* only clear for sco */
+ cfg->sco_a2dp_slots_used &= ~(1u << index);
+ }
+}
+#define PORTCFG_PCM_SET_SCO_USED(cfg, idx, use) \
+ portcfg_pcm_set_sco_used(&cfg, idx, use)
+#define PORTCFG_PCM_SET_RATIO(cfg, r) \
+ set_low_nibble(&(cfg).ratio_mode, (r))
+#define PORTCFG_PCM_SET_MODE(cfg, mode) \
+ set_high_nibble(&(cfg).ratio_mode, (mode))
+#define PORTCFG_PCM_SET_BITCLK(cfg, clk) \
+ set_low_nibble(&(cfg).bitclk_srate, (clk))
+#define PORTCFG_PCM_SET_SRATE(cfg, rate) \
+ set_high_nibble(&(cfg).bitclk_srate, (rate))
+
+#define CG2900_MC_PCM_SAMPLE_RATE_8 1
+#define CG2900_MC_PCM_SAMPLE_RATE_16 2
+#define CG2900_MC_PCM_SAMPLE_RATE_44_1 4
+#define CG2900_MC_PCM_SAMPLE_RATE_48 6
+
+struct mc_vs_port_cfg_i2s {
+ __u8 role_hper;
+ __u8 csel_srate;
+ __u8 wordlen;
+};
+#define PORTCFG_I2S_SET_ROLE(cfg, role) \
+ set_low_nibble(&(cfg).role_hper, (role))
+#define PORTCFG_I2S_SET_HALFPERIOD(cfg, hper) \
+ set_high_nibble(&(cfg).role_hper, (hper))
+#define PORTCFG_I2S_SET_CHANNELS(cfg, chnl) \
+ set_low_nibble(&(cfg).csel_srate, (chnl))
+#define PORTCFG_I2S_SET_SRATE(cfg, rate) \
+ set_high_nibble(&(cfg).csel_srate, (rate))
+#define PORTCFG_I2S_SET_WORDLEN(cfg, len) \
+ set_low_nibble(&(cfg).wordlen, len)
+
+#define CG2900_MC_I2S_RIGHT_CHANNEL 1
+#define CG2900_MC_I2S_LEFT_CHANNEL 2
+#define CG2900_MC_I2S_BOTH_CHANNELS 3
+
+#define CG2900_MC_I2S_SAMPLE_RATE_8 0
+#define CG2900_MC_I2S_SAMPLE_RATE_16 1
+#define CG2900_MC_I2S_SAMPLE_RATE_44_1 2
+#define CG2900_MC_I2S_SAMPLE_RATE_48 4
+
+#define CG2900_MC_I2S_WORD_16 1
+#define CG2900_MC_I2S_WORD_32 3
+
+struct mc_vs_port_cfg_fm {
+ __u8 srate; /* NB: value goes in _upper_ nibble! */
+};
+#define PORTCFG_FM_SET_SRATE(cfg, rate) \
+ set_high_nibble(&(cfg).srate, (rate))
+
+struct mc_vs_port_cfg_sco {
+ __le16 acl_id;
+ __u8 wbs_codec;
+ __u8 sbc_params[3]; /* replace when we actually enable WBS... */
+} __packed;
+#define PORTCFG_SCO_SET_WBS(cfg, wbs) \
+ set_low_nibble(&(cfg).wbs_codec, (wbs))
+#define PORTCFG_SCO_SET_CODEC(cfg, codec) \
+ set_high_nibble(&(cfg).wbs_codec, (codec))
+
+#define CG2900_MC_VS_CREATE_STREAM 0xFD66
+struct mc_vs_create_stream_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 inport;
+ __u8 outport;
+ __u8 order; /* NB: not used by chip */
+} __packed;
+
+#define CG2900_MC_VS_DELETE_STREAM 0xFD67
+struct mc_vs_delete_stream_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 stream;
+} __packed;
+
+#define CG2900_MC_VS_STREAM_CONTROL 0xFD68
+struct mc_vs_stream_ctrl_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 command;
+ __u8 n_streams;
+ __u8 stream[];
+} __packed;
+
+#define CG2900_MC_STREAM_START 0x00
+#define CG2900_MC_STREAM_STOP 0x01
+#define CG2900_MC_STREAM_STOP_FLUSH 0x02
+
+#define CG2900_MC_VS_SET_FM_START_MODE 0xFD69
+
+/*
+ * FM
+ */
+
+/* FM legacy command packet */
+struct fm_leg_cmd {
+ __u8 length;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 fm_function;
+ union { /* Payload varies with function */
+ __le16 irqmask;
+ struct fm_leg_fm_cmd {
+ __le16 head;
+ __le16 data[];
+ } fm_cmd;
+ };
+} __packed;
+
+/* FM legacy command complete packet */
+struct fm_leg_cmd_cmpl {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 read_write;
+ __u8 cmd_status;
+ __u8 fm_function;
+ __le16 response_head;
+ __le16 data[];
+} __packed;
+
+/* FM legacy interrupt packet, PG2 style */
+struct fm_leg_irq_v2 {
+ __u8 param_length;
+ __u8 status;
+ __u8 opcode;
+ __u8 event_type;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+/* FM legacy interrupt packet, PG1 style */
+struct fm_leg_irq_v1 {
+ __u8 param_length;
+ __u8 opcode;
+ __u8 event_id;
+ __le16 irq;
+} __packed;
+
+union fm_leg_evt_or_irq {
+ __u8 param_length;
+ struct fm_leg_cmd_cmpl evt;
+ struct fm_leg_irq_v2 irq_v2;
+ struct fm_leg_irq_v1 irq_v1;
+} __packed;
+
+/* FM Opcode generic*/
+#define CG2900_FM_GEN_ID_LEGACY 0xFE
+
+/* FM event*/
+#define CG2900_FM_EVENT_UNKNOWN 0
+#define CG2900_FM_EVENT_CMD_COMPLETE 1
+#define CG2900_FM_EVENT_INTERRUPT 2
+
+/* FM do-command identifiers. */
+#define CG2900_FM_DO_AIP_FADE_START 0x0046
+#define CG2900_FM_DO_AUP_BT_FADE_START 0x01C2
+#define CG2900_FM_DO_AUP_EXT_FADE_START 0x0102
+#define CG2900_FM_DO_AUP_FADE_START 0x00A2
+#define CG2900_FM_DO_FMR_SETANTENNA 0x0663
+#define CG2900_FM_DO_FMR_SP_AFSWITCH_START 0x04A3
+#define CG2900_FM_DO_FMR_SP_AFUPDATE_START 0x0463
+#define CG2900_FM_DO_FMR_SP_BLOCKSCAN_START 0x0683
+#define CG2900_FM_DO_FMR_SP_PRESETPI_START 0x0443
+#define CG2900_FM_DO_FMR_SP_SCAN_START 0x0403
+#define CG2900_FM_DO_FMR_SP_SEARCH_START 0x03E3
+#define CG2900_FM_DO_FMR_SP_SEARCHPI_START 0x0703
+#define CG2900_FM_DO_FMR_SP_TUNE_SETCHANNEL 0x03C3
+#define CG2900_FM_DO_FMR_SP_TUNE_STEPCHANNEL 0x04C3
+#define CG2900_FM_DO_FMT_PA_SETCTRL 0x01A4
+#define CG2900_FM_DO_FMT_PA_SETMODE 0x01E4
+#define CG2900_FM_DO_FMT_SP_TUNE_SETCHANNEL 0x0064
+#define CG2900_FM_DO_GEN_ANTENNACHECK_START 0x02A1
+#define CG2900_FM_DO_GEN_GOTOMODE 0x0041
+#define CG2900_FM_DO_GEN_POWERSUPPLY_SETMODE 0x0221
+#define CG2900_FM_DO_GEN_SELECTREFERENCECLOCK 0x0201
+#define CG2900_FM_DO_GEN_SETPROCESSINGCLOCK 0x0241
+#define CG2900_FM_DO_GEN_SETREFERENCECLOCKPLL 0x01A1
+#define CG2900_FM_DO_TST_TX_RAMP_START 0x0147
+#define CG2900_FM_CMD_NONE 0xFFFF
+#define CG2900_FM_CMD_ID_GEN_GOTO_POWER_DOWN 0x0081
+#define CG2900_FM_CMD_ID_GEN_GOTO_STANDBY 0x0061
+
+/* FM Command IDs */
+#define CG2900_FM_CMD_ID_AUP_EXT_SET_MODE 0x0162
+#define CG2900_FM_CMD_ID_AUP_EXT_SET_CTRL 0x0182
+#define CG2900_FM_CMD_ID_AIP_SET_MODE 0x01C6
+#define CG2900_FM_CMD_ID_AIP_BT_SET_CTRL 0x01A6
+#define CG2900_FM_CMD_ID_AIP_BT_SET_MODE 0x01E6
+
+/* FM Command Parameters. */
+#define CG2900_FM_CMD_PARAM_ENABLE 0x00
+#define CG2900_FM_CMD_PARAM_DISABLE 0x01
+#define CG2900_FM_CMD_PARAM_RESET 0x02
+#define CG2900_FM_CMD_PARAM_WRITECOMMAND 0x10
+#define CG2900_FM_CMD_PARAM_SET_INT_MASK_ALL 0x20
+#define CG2900_FM_CMD_PARAM_GET_INT_MASK_ALL 0x21
+#define CG2900_FM_CMD_PARAM_SET_INT_MASK 0x22
+#define CG2900_FM_CMD_PARAM_GET_INT_MASK 0x23
+#define CG2900_FM_CMD_PARAM_FM_FW_DOWNLOAD 0x30
+#define CG2900_FM_CMD_PARAM_NONE 0xFF
+
+/* FM Legacy Command Parameters */
+#define CG2900_FM_CMD_LEG_PARAM_WRITE 0x00
+#define CG2900_FM_CMD_LEG_PARAM_IRQ 0x01
+
+/* FM Command Status. */
+#define CG2900_FM_CMD_STATUS_COMMAND_SUCCEEDED 0x00
+#define CG2900_FM_CMD_STATUS_HW_FAILURE 0x03
+#define CG2900_FM_CMD_STATUS_INVALID_PARAMS 0x12
+#define CG2900_FM_CMD_STATUS_UNINITILIZED 0x15
+#define CG2900_FM_CMD_STATUS_UNSPECIFIED_ERROR 0x1F
+#define CG2900_FM_CMD_STATUS_COMMAND_DISALLOWED 0x0C
+#define CG2900_FM_CMD_STATUS_FW_WRONG_SEQUENCE_NR 0xF1
+#define CG2900_FM_CMD_STATUS_FW_UNKNOWN_FILE 0xF2
+#define CG2900_FM_CMD_STATUS_FW_FILE_VER_MISMATCH 0xF3
+
+/* FM Interrupts. */
+#define CG2900_FM_IRPT_FIQ 0x0000
+#define CG2900_FM_IRPT_OPERATION_SUCCEEDED 0x0001
+#define CG2900_FM_IRPT_OPERATION_FAILED 0x0002
+#define CG2900_FM_IRPT_BUFFER_FULL 0x0008
+#define CG2900_FM_IRPT_BUFFER_EMPTY 0x0008
+#define CG2900_FM_IRPT_SIGNAL_QUALITY_LOW 0x0010
+#define CG2900_FM_IRPT_MUTE_STATUS_CHANGED 0x0010
+#define CG2900_FM_IRPT_MONO_STEREO_TRANSITION 0x0020
+#define CG2900_FM_IRPT_OVER_MODULATION 0x0020
+#define CG2900_FM_IRPT_RDS_SYNC_FOUND 0x0040
+#define CG2900_FM_IRPT_INPUT_OVERDRIVE 0x0040
+#define CG2900_FM_IRPT_RDS_SYNC_LOST 0x0080
+#define CG2900_FM_IRPT_PI_CODE_CHANGED 0x0100
+#define CG2900_FM_IRPT_REQUEST_BLOCK_AVALIBLE 0x0200
+#define CG2900_FM_IRPT_BUFFER_CLEARED 0x2000
+#define CG2900_FM_IRPT_WARM_BOOT_READY 0x4000
+#define CG2900_FM_IRPT_COLD_BOOT_READY 0x8000
+
+/* FM Legacy Function Command Parameters */
+
+/* AUP_EXT_SetMode Output enum */
+#define CG2900_FM_CMD_AUP_EXT_SET_MODE_DISABLED 0x0000
+#define CG2900_FM_CMD_AUP_EXT_SET_MODE_I2S 0x0001
+#define CG2900_FM_CMD_AUP_EXT_SET_MODE_PARALLEL 0x0002
+
+/* SetControl Conversion enum */
+#define CG2900_FM_CMD_SET_CTRL_CONV_UP 0x0000
+#define CG2900_FM_CMD_SET_CTRL_CONV_DOWN 0x0001
+
+/* AIP_SetMode Input enum */
+#define CG2900_FM_CMD_AIP_SET_MODE_INPUT_ANA 0x0000
+#define CG2900_FM_CMD_AIP_SET_MODE_INPUT_DIG 0x0001
+
+/* AIP_BT_SetMode Input enum */
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_RESERVED 0x0000
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_I2S 0x0001
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_PAR 0x0002
+#define CG2900_FM_CMD_AIP_BT_SET_MODE_INPUT_FIFO 0x0003
+
+/* FM Parameter Lengths = FM command length - length field (1 byte) */
+#define CG2900_FM_CMD_PARAM_LEN(len) (len - 1)
+
+/*
+ * FM Command ID mapped per byte and shifted 3 bits left
+ * Also adds number of parameters at first 3 bits of LSB.
+ */
+static inline __u16 cg2900_get_fm_cmd_id(__u16 opcode)
+{
+ return opcode >> 3;
+}
+
+static inline __u16 cg2900_make_fm_cmd_id(__u16 id, __u8 num_params)
+{
+ return (id << 3) | num_params;
+}
+
+/*
+ * GNSS
+ */
+
+struct gnss_hci_hdr {
+ __u8 op_code;
+ __le16 plen;
+} __packed;
+
+#endif /* _CG2900_CHIP_H_ */
diff --git a/drivers/staging/cg2900/mfd/cg2900_core.c b/drivers/staging/cg2900/mfd/cg2900_core.c
new file mode 100644
index 0000000..66a452f
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_core.c
@@ -0,0 +1,713 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+#define NAME "cg2900_core"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/stat.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+
+/* Device names */
+#define CG2900_CDEV_NAME "cg2900_core_test"
+#define CG2900_CLASS_NAME "cg2900_class"
+#define CG2900_DEVICE_NAME "cg2900_driver"
+#define CORE_WQ_NAME "cg2900_core_wq"
+
+#define LOGGER_DIRECTION_TX 0
+#define LOGGER_DIRECTION_RX 1
+
+/*
+ * Timeout values
+ */
+#define CHIP_READY_TIMEOUT (100) /* ms */
+#define REVISION_READOUT_TIMEOUT (500) /* ms */
+#define SLEEP_TIMEOUT_MS (10000) /* ms */
+
+/**
+ * enum boot_state - BOOT-state for CG2900 Core.
+ * @BOOT_RESET: HCI Reset has been sent.
+ * @BOOT_READ_LOCAL_VERSION_INFORMATION: ReadLocalVersionInformation
+ * command has been sent.
+ * @BOOT_READY: CG2900 Core boot is ready.
+ * @BOOT_FAILED: CG2900 Core boot failed.
+ */
+enum boot_state {
+ BOOT_RESET,
+ BOOT_READ_LOCAL_VERSION_INFORMATION,
+ BOOT_READY,
+ BOOT_FAILED
+};
+
+/**
+ * struct chip_handler_item - Structure to store chip handler cb.
+ * @list: list_head struct.
+ * @cb: Chip handler callback struct.
+ */
+struct chip_handler_item {
+ struct list_head list;
+ struct cg2900_id_callbacks cb;
+};
+
+/**
+ * struct core_info - Main info structure for CG2900 Core.
+ * @boot_state: Current BOOT-state of CG2900 Core.
+ * @wq: CG2900 Core workqueue.
+ * @chip_dev: Device structure for chip driver.
+ * @work: Work structure.
+ */
+struct core_info {
+ enum boot_state boot_state;
+ struct workqueue_struct *wq;
+ struct cg2900_chip_dev *chip_dev;
+ struct work_struct work;
+};
+
+/**
+ * struct main_info - Main info structure for CG2900 Core.
+ * @dev: Device structure for STE Connectivity driver.
+ * @man_mutex: Management mutex.
+ * @chip_handlers: List of the register handlers for different chips.
+ * @wq: Wait queue.
+ */
+struct main_info {
+ struct device *dev;
+ struct mutex man_mutex;
+ struct list_head chip_handlers;
+ wait_queue_head_t wq;
+};
+
+/* core_info - Main information object for CG2900 Core. */
+static struct main_info *main_info;
+
+/* Module parameters */
+u8 bd_address[] = {0x00, 0xBE, 0xAD, 0xDE, 0x80, 0x00};
+EXPORT_SYMBOL_GPL(bd_address);
+int bd_addr_count = BT_BDADDR_SIZE;
+
+static int sleep_timeout_ms = SLEEP_TIMEOUT_MS;
+
+/**
+ * send_bt_cmd() - Copy and send sk_buffer with no assigned user.
+ * @dev: Current chip to transmit to.
+ * @data: Data to send.
+ * @length: Length in bytes of data.
+ *
+ * The send_bt_cmd() function allocate sk_buffer, copy supplied
+ * data to it, and send the sk_buffer to controller.
+ */
+void send_bt_cmd(struct cg2900_chip_dev *dev, void *data, int length)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = alloc_skb(length + HCI_H4_SIZE, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(dev->dev, "send_bt_cmd: Couldn't alloc sk_buff with "
+ "length %d\n", length);
+ return;
+ }
+
+ skb_reserve(skb, HCI_H4_SIZE);
+ memcpy(skb_put(skb, length), data, length);
+ skb_push(skb, HCI_H4_SIZE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ err = dev->t_cb.write(dev, skb);
+ if (err) {
+ dev_err(dev->dev, "send_bt_cmd: Transport write failed (%d)\n",
+ err);
+ kfree_skb(skb);
+ }
+}
+
+/**
+ * handle_reset_cmd_complete_evt() - Handle a received HCI Command Complete event for a Reset command.
+ * @dev: Current device.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_reset_cmd_complete_evt(struct cg2900_chip_dev *dev, u8 *data)
+{
+ bool pkt_handled = false;
+ u8 status = data[0];
+ struct hci_command_hdr cmd;
+ struct core_info *info = dev->prv_data;
+
+ dev_dbg(dev->dev, "Received Reset complete event with status 0x%X\n",
+ status);
+
+ if (info->boot_state == BOOT_RESET) {
+ /* Transmit HCI Read Local Version Information command */
+ dev_dbg(dev->dev, "New boot_state: "
+ "BOOT_READ_LOCAL_VERSION_INFORMATION\n");
+ info->boot_state = BOOT_READ_LOCAL_VERSION_INFORMATION;
+ cmd.opcode = cpu_to_le16(HCI_OP_READ_LOCAL_VERSION);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ send_bt_cmd(dev, &cmd, sizeof(cmd));
+
+ pkt_handled = true;
+ }
+
+ return pkt_handled;
+}
+
+/**
+ * handle_read_local_version_info_cmd_complete_evt() - Handle a received HCI Command Complete event for a ReadLocalVersionInformation command.
+ * @dev: Current device.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool
+handle_read_local_version_info_cmd_complete_evt(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ struct hci_rp_read_local_version *evt;
+ struct core_info *info = dev->prv_data;
+
+ /* Check we're in the right state */
+ if (info->boot_state != BOOT_READ_LOCAL_VERSION_INFORMATION)
+ return false;
+
+ /* We got an answer for our HCI command. Extract data */
+ evt = (struct hci_rp_read_local_version *)data;
+
+ /* We will handle the packet */
+ if (HCI_BT_ERROR_NO_ERROR != evt->status) {
+ dev_err(dev->dev, "Received Read Local Version Information "
+ "with status 0x%X\n", evt->status);
+ dev_dbg(dev->dev, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ wake_up_all(&main_info->wq);
+ return true;
+ }
+
+ /* The command worked. Store the data */
+ dev->chip.hci_version = evt->hci_ver;
+ dev->chip.hci_revision = le16_to_cpu(evt->hci_rev);
+ dev->chip.lmp_pal_version = evt->lmp_ver;
+ dev->chip.manufacturer = le16_to_cpu(evt->manufacturer);
+ dev->chip.hci_sub_version = le16_to_cpu(evt->lmp_subver);
+ dev_info(dev->dev, "Received Read Local Version Information with:\n"
+ "\thci_version: 0x%02X\n"
+ "\thci_revision: 0x%04X\n"
+ "\tlmp_pal_version: 0x%02X\n"
+ "\tmanufacturer: 0x%04X\n"
+ "\thci_sub_version: 0x%04X\n",
+ dev->chip.hci_version, dev->chip.hci_revision,
+ dev->chip.lmp_pal_version, dev->chip.manufacturer,
+ dev->chip.hci_sub_version);
+
+ dev_dbg(dev->dev, "New boot_state: BOOT_READY\n");
+ info->boot_state = BOOT_READY;
+ wake_up_all(&main_info->wq);
+
+ return true;
+}
+
+/**
+ * handle_rx_data_bt_evt() - Check if data should be handled in CG2900 Core.
+ * @dev: Current chip
+ * @skb: Data packet
+ *
+ * The handle_rx_data_bt_evt() function checks if received data should be
+ * handled in CG2900 Core. If so handle it correctly.
+ * Received data is always HCI BT Event.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_rx_data_bt_evt(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ bool pkt_handled = false;
+ u8 *data = &skb->data[CG2900_SKB_RESERVE];
+ struct hci_event_hdr *evt;
+ struct hci_ev_cmd_complete *cmd_complete;
+ u16 op_code;
+
+ evt = (struct hci_event_hdr *)data;
+
+ /* First check the event code */
+ if (HCI_EV_CMD_COMPLETE != evt->evt)
+ return false;
+
+ data += sizeof(*evt);
+ cmd_complete = (struct hci_ev_cmd_complete *)data;
+
+ op_code = le16_to_cpu(cmd_complete->opcode);
+
+ dev_dbg(dev->dev, "Received Command Complete: op_code = 0x%04X\n",
+ op_code);
+ data += sizeof(*cmd_complete); /* Move to first byte after OCF */
+
+ if (op_code == HCI_OP_RESET)
+ pkt_handled = handle_reset_cmd_complete_evt(dev, data);
+ else if (op_code == HCI_OP_READ_LOCAL_VERSION)
+ pkt_handled = handle_read_local_version_info_cmd_complete_evt
+ (dev, data);
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+static void cg2900_data_from_chip(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ u8 h4_channel;
+
+ dev_dbg(dev->dev, "cg2900_data_from_chip\n");
+
+ if (!skb) {
+ dev_err(dev->dev, "No data supplied\n");
+ return;
+ }
+
+ h4_channel = skb->data[0];
+
+ /*
+ * First check if this is the response for something
+ * we have sent internally.
+ */
+ if (HCI_BT_EVT_H4_CHANNEL == h4_channel &&
+ handle_rx_data_bt_evt(dev, skb)) {
+ dev_dbg(dev->dev, "Received packet handled internally\n");
+ } else {
+ dev_err(dev->dev,
+ "cg2900_data_from_chip: Received unexpected packet\n");
+ kfree_skb(skb);
+ }
+}
+
+/**
+ * work_hw_registered() - Called when the interface to HW has been established.
+ * @work: Reference to work data.
+ *
+ * Since there now is a transport identify the connected chip and decide which
+ * chip handler to use.
+ */
+static void work_hw_registered(struct work_struct *work)
+{
+ struct hci_command_hdr cmd;
+ struct cg2900_chip_dev *dev;
+ struct core_info *info;
+ bool chip_handled = false;
+ struct list_head *cursor;
+ struct chip_handler_item *tmp;
+
+ dev_dbg(main_info->dev, "work_hw_registered\n");
+
+ if (!work) {
+ dev_err(main_info->dev, "work_hw_registered: work == NULL\n");
+ return;
+ }
+
+ info = container_of(work, struct core_info, work);
+ dev = info->chip_dev;
+
+ /*
+ * This might look strange, but we need to read out
+ * the revision info in order to be able to shutdown the chip properly.
+ */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait 100ms before continuing to be sure that the chip is ready */
+ schedule_timeout_killable(msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ /* Set our function to receive data from chip */
+ dev->c_cb.data_from_chip = cg2900_data_from_chip;
+
+ /*
+ * Transmit HCI reset command to ensure the chip is using
+ * the correct transport
+ */
+ dev_dbg(dev->dev, "New boot_state: BOOT_RESET\n");
+ info->boot_state = BOOT_RESET;
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ send_bt_cmd(dev, &cmd, sizeof(cmd));
+
+ dev_dbg(dev->dev,
+ "Wait up to 500 milliseconds for revision to be read\n");
+ wait_event_timeout(main_info->wq,
+ (BOOT_READY == info->boot_state ||
+ BOOT_FAILED == info->boot_state),
+ msecs_to_jiffies(REVISION_READOUT_TIMEOUT));
+
+ if (BOOT_READY != info->boot_state) {
+ dev_err(dev->dev,
+ "Could not read out revision from the chip\n");
+ return;
+ }
+
+ dev->c_cb.data_from_chip = NULL;
+
+ mutex_lock(&main_info->man_mutex);
+ list_for_each(cursor, &main_info->chip_handlers) {
+ tmp = list_entry(cursor, struct chip_handler_item, list);
+ chip_handled = tmp->cb.check_chip_support(dev);
+ if (chip_handled) {
+ dev_info(dev->dev, "Chip handler found\n");
+ break;
+ }
+ }
+ mutex_unlock(&main_info->man_mutex);
+
+ if (!chip_handled)
+ dev_info(dev->dev, "No chip handler found\n");
+}
+
+/**
+ * cg2900_register_chip_driver() - Register a chip handler.
+ * @cb: Callbacks to call when chip is connected.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL is supplied as @cb.
+ * -ENOMEM if allocation fails or work queue can't be created.
+ */
+int cg2900_register_chip_driver(struct cg2900_id_callbacks *cb)
+{
+ struct chip_handler_item *item;
+
+ dev_dbg(main_info->dev, "cg2900_register_chip_driver\n");
+
+ if (!cb) {
+ dev_err(main_info->dev, "NULL supplied as cb\n");
+ return -EINVAL;
+ }
+
+ item = kzalloc(sizeof(*item), GFP_KERNEL);
+ if (!item) {
+ dev_err(main_info->dev,
+ "cg2900_register_chip_driver: "
+ "Failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ memcpy(&item->cb, cb, sizeof(cb));
+ mutex_lock(&main_info->man_mutex);
+ list_add_tail(&item->list, &main_info->chip_handlers);
+ mutex_unlock(&main_info->man_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cg2900_register_chip_driver);
+
+/**
+ * cg2900_deregister_chip_driver() - Deregister a chip handler.
+ * @cb: Callbacks to call when chip is connected.
+ */
+void cg2900_deregister_chip_driver(struct cg2900_id_callbacks *cb)
+{
+ struct chip_handler_item *tmp;
+ struct list_head *cursor, *next;
+
+ dev_dbg(main_info->dev, "cg2900_deregister_chip_driver\n");
+
+ if (!cb) {
+ dev_err(main_info->dev, "NULL supplied as cb\n");
+ return;
+ }
+ mutex_lock(&main_info->man_mutex);
+ list_for_each_safe(cursor, next, &main_info->chip_handlers) {
+ tmp = list_entry(cursor, struct chip_handler_item, list);
+ if (tmp->cb.check_chip_support == cb->check_chip_support) {
+ list_del(cursor);
+ kfree(tmp);
+ break;
+ }
+ }
+ mutex_unlock(&main_info->man_mutex);
+}
+EXPORT_SYMBOL_GPL(cg2900_deregister_chip_driver);
+
+/**
+ * cg2900_register_trans_driver() - Register a transport driver.
+ * @dev: Transport device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL is supplied as @cb.
+ * -ENOMEM if allocation fails or work queue can't be created.
+ * -EACCES if work can't be queued.
+ */
+int cg2900_register_trans_driver(struct cg2900_chip_dev *dev)
+{
+ int err;
+ struct cg2900_platform_data *pf_data;
+ struct core_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!dev || !dev->dev) {
+ dev_err(main_info->dev, "cg2900_register_trans_driver: "
+ "Received NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev->dev, "cg2900_register_trans_driver\n");
+
+ if (!dev->t_cb.write) {
+ dev_err(dev->dev, "cg2900_register_trans_driver: Write function"
+ " missing\n");
+ return -EINVAL;
+ }
+
+ pf_data = dev_get_platdata(dev->dev);
+ if (!pf_data) {
+ dev_err(dev->dev, "cg2900_register_trans_driver: Missing "
+ "platform data\n");
+ return -EINVAL;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Couldn't allocate info\n");
+ return -ENOMEM;
+ }
+
+ if (pf_data->init) {
+ err = pf_data->init(dev);
+ if (err) {
+ dev_err(dev->dev, "Platform init failed (%d)\n", err);
+ goto error_handling;
+ }
+ }
+
+ info->chip_dev = dev;
+ dev->prv_data = info;
+
+ info->wq = create_singlethread_workqueue(CORE_WQ_NAME);
+ if (!info->wq) {
+ dev_err(dev->dev, "Could not create workqueue\n");
+ err = -ENOMEM;
+ goto error_handling_exit;
+ }
+
+ dev_info(dev->dev, "Transport connected\n");
+
+ INIT_WORK(&info->work, work_hw_registered);
+ if (!queue_work(info->wq, &info->work)) {
+ dev_err(dev->dev, "Failed to queue work_hw_registered because "
+ "it's already in the queue\n");
+ err = -EACCES;
+ goto error_handling_wq;
+ }
+
+ return 0;
+
+error_handling_wq:
+ destroy_workqueue(info->wq);
+error_handling_exit:
+ if (pf_data->exit)
+ pf_data->exit(dev);
+error_handling:
+ kfree(info);
+ return err;
+}
+EXPORT_SYMBOL_GPL(cg2900_register_trans_driver);
+
+/**
+ * cg2900_deregister_trans_driver() - Deregister a transport driver.
+ * @dev: Transport device.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EINVAL if NULL is supplied as @cb.
+ * -ENOMEM if allocation fails or work queue can't be created.
+ */
+int cg2900_deregister_trans_driver(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_platform_data *pf_data;
+ struct core_info *info = dev->prv_data;
+
+ BUG_ON(!main_info);
+
+ dev_dbg(dev->dev, "cg2900_deregister_trans_driver\n");
+
+ if (dev->c_cb.chip_removed)
+ dev->c_cb.chip_removed(dev);
+
+ destroy_workqueue(info->wq);
+
+ dev->prv_data = NULL;
+ kfree(info);
+
+ dev_info(dev->dev, "Transport disconnected\n");
+
+ pf_data = dev_get_platdata(dev->dev);
+ if (!pf_data) {
+ dev_err(dev->dev, "Missing platform data\n");
+ return -EINVAL;
+ }
+
+ if (pf_data->exit)
+ pf_data->exit(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cg2900_deregister_trans_driver);
+
+/**
+ * cg2900_get_sleep_timeout() - Return sleep timeout in jiffies.
+ *
+ * Returns:
+ * Sleep timeout in jiffies. 0 means that sleep timeout shall not be used.
+ */
+unsigned long cg2900_get_sleep_timeout(void)
+{
+ if (!sleep_timeout_ms)
+ return 0;
+
+ return msecs_to_jiffies(sleep_timeout_ms);
+}
+EXPORT_SYMBOL_GPL(cg2900_get_sleep_timeout);
+
+/**
+ * cg2900_probe() - Initialize module.
+ *
+ * @pdev: Platform device.
+ *
+ * This function initialize the transport and CG2900 Core, then
+ * register to the transport framework.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ */
+static int __devinit cg2900_probe(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "cg2900_probe\n");
+
+ main_info = kzalloc(sizeof(*main_info), GFP_KERNEL);
+ if (!main_info) {
+ dev_err(&pdev->dev, "Couldn't allocate main_info\n");
+ return -ENOMEM;
+ }
+
+ main_info->dev = &pdev->dev;
+ mutex_init(&main_info->man_mutex);
+ INIT_LIST_HEAD(&main_info->chip_handlers);
+ init_waitqueue_head(&main_info->wq);
+
+ dev_info(&pdev->dev, "CG2900 Core driver started\n");
+
+ return 0;
+}
+
+/**
+ * cg2900_remove() - Remove module.
+ *
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM if core_info does not exist.
+ * -EINVAL if platform data does not exist in the device.
+ */
+static int __devexit cg2900_remove(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "cg2900_remove\n");
+
+ kfree(main_info);
+ main_info = NULL;
+
+ dev_info(&pdev->dev, "CG2900 Core driver removed\n");
+
+ return 0;
+}
+
+static struct platform_driver cg2900_driver = {
+ .driver = {
+ .name = "cg2900",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_probe,
+ .remove = __devexit_p(cg2900_remove),
+};
+
+/**
+ * cg2900_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_init(void)
+{
+ pr_debug("cg2900_init");
+ return platform_driver_register(&cg2900_driver);
+}
+
+/**
+ * cg2900_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_exit(void)
+{
+ pr_debug("cg2900_exit");
+ platform_driver_unregister(&cg2900_driver);
+}
+
+module_init(cg2900_init);
+module_exit(cg2900_exit);
+
+module_param(sleep_timeout_ms, int, S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(sleep_timeout_ms,
+ "Sleep timeout for data transmissions:\n"
+ "\tDefault 10000 ms\n"
+ "\t0 = disable\n"
+ "\t>0 = sleep timeout in milliseconds");
+
+module_param_array(bd_address, byte, &bd_addr_count,
+ S_IRUGO | S_IWUSR | S_IWGRP);
+MODULE_PARM_DESC(bd_address,
+ "Bluetooth Device address. "
+ "Default 0x00 0x80 0xDE 0xAD 0xBE 0xEF. "
+ "Enter as comma separated value.");
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux Bluetooth HCI H:4 CG2900 Connectivity Device Driver");
diff --git a/drivers/staging/cg2900/mfd/cg2900_core.h b/drivers/staging/cg2900/mfd/cg2900_core.h
new file mode 100644
index 0000000..bdd951a
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_core.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+
+#ifndef _CG2900_CORE_H_
+#define _CG2900_CORE_H_
+
+#include <linux/device.h>
+#include <linux/skbuff.h>
+
+/* Reserve 1 byte for the HCI H:4 header */
+#define HCI_H4_SIZE 1
+#define CG2900_SKB_RESERVE HCI_H4_SIZE
+
+/* Number of bytes to reserve at start of sk_buffer when receiving packet */
+#define RX_SKB_RESERVE 8
+
+#define BT_BDADDR_SIZE 6
+
+/* Standardized Bluetooth H:4 channels */
+#define HCI_BT_CMD_H4_CHANNEL 0x01
+#define HCI_BT_ACL_H4_CHANNEL 0x02
+#define HCI_BT_SCO_H4_CHANNEL 0x03
+#define HCI_BT_EVT_H4_CHANNEL 0x04
+
+/* Default H4 channels which may change depending on connected controller */
+#define HCI_FM_RADIO_H4_CHANNEL 0x08
+#define HCI_GNSS_H4_CHANNEL 0x09
+
+/* Bluetooth error codes */
+#define HCI_BT_ERROR_NO_ERROR 0x00
+
+/* Bluetooth lengths */
+#define HCI_BT_SEND_FILE_MAX_CHUNK_SIZE 254
+
+#define LOGGER_DIRECTION_TX 0
+#define LOGGER_DIRECTION_RX 1
+
+/* module_param declared in cg2900_core.c */
+extern u8 bd_address[BT_BDADDR_SIZE];
+
+#endif /* _CG2900_CORE_H_ */
diff --git a/drivers/staging/cg2900/mfd/cg2900_lib.c b/drivers/staging/cg2900/mfd/cg2900_lib.c
new file mode 100644
index 0000000..cb8ad46
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_lib.c
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+#define NAME "cg2900_lib"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+
+#include "cg2900.h"
+#include "cg2900_chip.h"
+#include "cg2900_core.h"
+#include "cg2900_lib.h"
+
+/*
+ * Max length in bytes for line buffer used to parse settings and patch file.
+ * Must be max length of name plus characters used to define chip version.
+ */
+#define LINE_BUFFER_LENGTH (NAME_MAX + 30)
+#define LOGGER_HEADER_SIZE 1
+/**
+ * cg2900_tx_to_chip() - Transmit buffer to the transport.
+ * @user: User data for BT command channel.
+ * @logger: User data for logger channel.
+ * @skb: Data packet.
+ *
+ * The transmit_skb_to_chip() function transmit buffer to the transport.
+ * If enabled, copy the transmitted data to the HCI logger as well.
+ */
+void cg2900_tx_to_chip(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger, struct sk_buff *skb)
+{
+ int err;
+ struct cg2900_chip_dev *chip_dev;
+
+ dev_dbg(user->dev, "cg2900_tx_to_chip %d bytes.\n", skb->len);
+
+ if (logger)
+ cg2900_send_to_hci_logger(logger, skb, LOGGER_DIRECTION_TX);
+
+ chip_dev = cg2900_get_prv(user);
+ err = chip_dev->t_cb.write(chip_dev, skb);
+ if (err) {
+ dev_err(user->dev, "cg2900_tx_to_chip: Transport write failed "
+ "(%d)\n", err);
+ kfree_skb(skb);
+ }
+}
+EXPORT_SYMBOL_GPL(cg2900_tx_to_chip);
+
+/**
+ * cg2900_tx_no_user() - Transmit buffer to the transport.
+ * @dev: Current chip to transmit to.
+ * @skb: Data packet.
+ *
+ * This function transmits buffer to the transport when no user exist (system
+ * startup for example).
+ */
+void cg2900_tx_no_user(struct cg2900_chip_dev *dev, struct sk_buff *skb)
+{
+ int err;
+
+ dev_dbg(dev->dev, "cg2900_tx_no_user %d bytes.\n", skb->len);
+
+ err = dev->t_cb.write(dev, skb);
+ if (err) {
+ dev_err(dev->dev, "cg2900_tx_no_user: Transport write failed "
+ "(%d)\n", err);
+ kfree_skb(skb);
+ }
+}
+EXPORT_SYMBOL_GPL(cg2900_tx_no_user);
+
+/**
+ * create_and_send_bt_cmd() - Copy and send sk_buffer.
+ * @user: User data for current channel.
+ * @logger: User data for logger channel.
+ * @data: Data to send.
+ * @length: Length in bytes of data.
+ *
+ * The create_and_send_bt_cmd() function allocate sk_buffer, copy supplied data
+ * to it, and send the sk_buffer to controller.
+ */
+void cg2900_send_bt_cmd(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ void *data, int length)
+{
+ struct sk_buff *skb;
+
+ skb = user->alloc_skb(length, GFP_ATOMIC);
+ if (!skb) {
+ dev_err(user->dev, "cg2900_send_bt_cmd: Couldn't alloc "
+ "sk_buff with length %d\n", length);
+ return;
+ }
+
+ memcpy(skb_put(skb, length), data, length);
+ skb_push(skb, HCI_H4_SIZE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ cg2900_tx_to_chip(user, logger, skb);
+}
+EXPORT_SYMBOL_GPL(cg2900_send_bt_cmd);
+
+/**
+ * cg2900_send_bt_cmd_no_user() - Copy and send sk_buffer with no assigned user.
+ * @dev: Current chip to transmit to.
+ * @data: Data to send.
+ * @length: Length in bytes of data.
+ *
+ * The cg2900_send_bt_cmd_no_user() function allocate sk_buffer, copy supplied
+ * data to it, and send the sk_buffer to controller.
+ */
+void cg2900_send_bt_cmd_no_user(struct cg2900_chip_dev *dev, void *data,
+ int length)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_skb(length + HCI_H4_SIZE, GFP_KERNEL);
+ if (!skb) {
+ dev_err(dev->dev, "cg2900_send_bt_cmd_no_user: Couldn't alloc "
+ "sk_buff with length %d\n", length);
+ return;
+ }
+
+ skb_reserve(skb, HCI_H4_SIZE);
+ memcpy(skb_put(skb, length), data, length);
+ skb_push(skb, HCI_H4_SIZE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ cg2900_tx_no_user(dev, skb);
+}
+EXPORT_SYMBOL_GPL(cg2900_send_bt_cmd_no_user);
+
+/**
+ * create_work_item() - Create work item and add it to the work queue.
+ * @wq: Work queue.
+ * @work_func: Work function.
+ * @user_data: Arbitrary data set by user.
+ *
+ * The create_work_item() function creates work item and add it to
+ * the work queue.
+ * Note that work is allocated by kmalloc and work must be freed when work
+ * function is started.
+ */
+void cg2900_create_work_item(struct workqueue_struct *wq, work_func_t work_func,
+ void *user_data)
+{
+ struct cg2900_work *new_work;
+ int err;
+
+ new_work = kmalloc(sizeof(*new_work), GFP_ATOMIC);
+ if (!new_work) {
+ pr_err("Failed to alloc memory for new_work");
+ return;
+ }
+
+ INIT_WORK(&new_work->work, work_func);
+ new_work->user_data = user_data;
+
+ err = queue_work(wq, &new_work->work);
+ if (!err) {
+ pr_err("Failed to queue work_struct because it's already "
+ "in the queue");
+ kfree(new_work);
+ }
+}
+EXPORT_SYMBOL_GPL(cg2900_create_work_item);
+
+/**
+ * read_and_send_file_part() - Transmit a part of the supplied file.
+ * @user: User data for current channel.
+ * @logger: User data for logger channel.
+ * @info: File information.
+ *
+ * The cg2900_read_and_send_file_part() function transmit a part of the supplied
+ * file to the controller.
+ *
+ * Returns:
+ * 0 if there is no more data in the file.
+ * >0 for number of bytes sent.
+ * -ENOMEM if skb allocation failed.
+ */
+int cg2900_read_and_send_file_part(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ struct cg2900_file_info *info)
+{
+ int bytes_to_copy;
+ struct sk_buff *skb;
+ struct bt_vs_write_file_block_cmd *cmd;
+ int plen;
+
+ /*
+ * Calculate number of bytes to copy;
+ * either max bytes for HCI packet or number of bytes left in file
+ */
+ bytes_to_copy = min((int)HCI_BT_SEND_FILE_MAX_CHUNK_SIZE,
+ (int)(info->fw_file->size - info->file_offset));
+
+ if (bytes_to_copy <= 0) {
+ /* Nothing more to read in file. */
+ dev_dbg(user->dev, "File download finished\n");
+ info->chunk_id = 0;
+ info->file_offset = 0;
+ return 0;
+ }
+
+ /* There is more data to send */
+ plen = sizeof(*cmd) + bytes_to_copy;
+ skb = user->alloc_skb(plen, GFP_KERNEL);
+ if (!skb) {
+ dev_err(user->dev, "Couldn't allocate sk_buffer\n");
+ return -ENOMEM;
+ }
+
+ skb_put(skb, plen);
+
+ cmd = (struct bt_vs_write_file_block_cmd *)skb->data;
+ cmd->opcode = cpu_to_le16(CG2900_BT_OP_VS_WRITE_FILE_BLOCK);
+ cmd->plen = BT_PARAM_LEN(plen);
+ cmd->id = info->chunk_id;
+ info->chunk_id++;
+
+ /* Copy the data from offset position */
+ memcpy(cmd->data,
+ &(info->fw_file->data[info->file_offset]),
+ bytes_to_copy);
+
+ /* Increase offset with number of bytes copied */
+ info->file_offset += bytes_to_copy;
+
+ skb_push(skb, CG2900_SKB_RESERVE);
+ skb->data[0] = HCI_BT_CMD_H4_CHANNEL;
+
+ cg2900_tx_to_chip(user, logger, skb);
+
+ return bytes_to_copy;
+}
+EXPORT_SYMBOL_GPL(cg2900_read_and_send_file_part);
+
+void cg2900_send_to_hci_logger(struct cg2900_user_data *logger,
+ struct sk_buff *skb,
+ u8 direction)
+{
+ struct sk_buff *skb_log;
+ u8 *p;
+
+ /*
+ * Alloc a new sk_buff and copy the data into it. Then send it to
+ * the HCI logger.
+ */
+ skb_log = alloc_skb(skb->len + LOGGER_HEADER_SIZE, GFP_NOWAIT);
+ if (!skb_log) {
+ pr_err("cg2900_send_to_hci_logger:\
+ Couldn't allocate skb_log\n");
+ return;
+ }
+ /* Reserve 1 byte for direction.*/
+ skb_reserve(skb_log, LOGGER_HEADER_SIZE);
+
+ memcpy(skb_put(skb_log, skb->len), skb->data, skb->len);
+ p = skb_push(skb_log, LOGGER_HEADER_SIZE);
+ *p = (u8) direction;
+
+ if (logger->read_cb)
+ logger->read_cb(logger, skb_log);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(cg2900_send_to_hci_logger);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux CG2900 Library functions");
diff --git a/drivers/staging/cg2900/mfd/cg2900_lib.h b/drivers/staging/cg2900/mfd/cg2900_lib.h
new file mode 100644
index 0000000..99d5ce6
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_lib.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson CG2900 GPS/BT/FM controller.
+ */
+
+#ifndef _CG2900_LIB_H_
+#define _CG2900_LIB_H_
+
+#include <linux/firmware.h>
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+
+#include "cg2900.h"
+
+/**
+ * struct cg2900_work - Generic work structure.
+ * @work: Work structure.
+ * @user_data: Arbitrary data set by user.
+ */
+struct cg2900_work {
+ struct work_struct work;
+ void *user_data;
+};
+
+/**
+ * struct cg2900_file_info - Info structure for file to download.
+ * @fw_file: Stores firmware file.
+ * @file_offset: Current read offset in firmware file.
+ * @chunk_id: Stores current chunk ID of write file
+ * operations.
+ */
+struct cg2900_file_info {
+ const struct firmware *fw_file;
+ int file_offset;
+ u8 chunk_id;
+};
+
+extern void cg2900_tx_to_chip(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ struct sk_buff *skb);
+extern void cg2900_tx_no_user(struct cg2900_chip_dev *dev, struct sk_buff *skb);
+extern void cg2900_send_bt_cmd(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ void *data, int length);
+extern void cg2900_send_bt_cmd_no_user(struct cg2900_chip_dev *dev, void *data,
+ int length);
+extern void cg2900_create_work_item(struct workqueue_struct *wq,
+ work_func_t work_func,
+ void *user_data);
+extern int cg2900_read_and_send_file_part(struct cg2900_user_data *user,
+ struct cg2900_user_data *logger,
+ struct cg2900_file_info *info);
+extern void cg2900_send_to_hci_logger(struct cg2900_user_data *logger,
+ struct sk_buff *skb,
+ u8 direction);
+
+#endif /* _CG2900_LIB_H_ */
diff --git a/drivers/staging/cg2900/mfd/cg2900_test.c b/drivers/staging/cg2900/mfd/cg2900_test.c
new file mode 100644
index 0000000..58ac616
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/cg2900_test.c
@@ -0,0 +1,402 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Driver for ST-Ericsson CG2900 test character device.
+ */
+#define NAME "cg2900_test"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/wait.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+
+#define MISC_DEV (info->misc_dev.this_device)
+
+/* Device names */
+#define CG2900_CDEV_NAME "cg2900_core_test"
+
+/**
+ * struct test_info - Main info structure for CG2900 test char device.
+ * @misc_dev: Registered Misc Device.
+ * @rx_queue: RX data queue.
+ * @dev: Device structure for STE Connectivity driver.
+ * @pdev: Platform device structure for STE Connectivity driver.
+ */
+struct test_info {
+ struct miscdevice misc_dev;
+ struct sk_buff_head rx_queue;
+ struct device *dev;
+ struct platform_device *pdev;
+};
+
+static struct test_info *test_info;
+
+/*
+ * main_wait_queue - Char device Wait Queue in CG2900 Core.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(char_wait_queue);
+
+/**
+ * tx_to_char_dev() - Handle data received from CG2900 Core.
+ * @dev: Current chip device information.
+ * @skb: Buffer with data coming form device.
+ */
+static int tx_to_char_dev(struct cg2900_chip_dev *dev, struct sk_buff *skb)
+{
+ struct test_info *info = dev->t_data;
+ skb_queue_tail(&info->rx_queue, skb);
+ wake_up_interruptible_all(&char_wait_queue);
+ return 0;
+}
+
+/**
+ * cg2900_test_open() - User space char device has been opened.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * -EACCES if transport already exists.
+ * -ENOMEM if allocation fails.
+ * Errors from create_work_item.
+ */
+static int cg2900_test_open(struct inode *inode, struct file *filp)
+{
+ struct test_info *info = test_info;
+ struct cg2900_chip_dev *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ dev_err(MISC_DEV, "Cannot allocate test_dev\n");
+ return -ENOMEM;
+ }
+ dev->dev = info->dev;
+ dev->pdev = info->pdev;
+ dev->t_data = info;
+ dev->t_cb.write = tx_to_char_dev;
+ filp->private_data = dev;
+
+ dev_info(MISC_DEV, "CG2900 test char dev opened\n");
+ return cg2900_register_trans_driver(dev);
+}
+
+/**
+ * cg2900_test_release() - User space char device has been closed.
+ * @inode: Device driver information.
+ * @filp: Pointer to the file struct.
+ *
+ * Returns:
+ * 0 if there is no error.
+ */
+static int cg2900_test_release(struct inode *inode, struct file *filp)
+{
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+
+ dev_info(MISC_DEV, "CG2900 test char dev closed\n");
+ skb_queue_purge(&info->rx_queue);
+ cg2900_deregister_trans_driver(dev);
+ kfree(dev);
+
+ return 0;
+}
+
+/**
+ * cg2900_test_read() - Queue and copy buffer to user space char device.
+ * @filp: Pointer to the file struct.
+ * @buf: Received buffer.
+ * @count: Count of received data in bytes.
+ * @f_pos: Position in buffer.
+ *
+ * Returns:
+ * >= 0 is number of bytes read.
+ * -EFAULT if copy_to_user fails.
+ */
+static ssize_t cg2900_test_read(struct file *filp, char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct sk_buff *skb;
+ int bytes_to_copy;
+ int err;
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+ struct sk_buff_head *rx_queue = &info->rx_queue;
+
+ dev_dbg(MISC_DEV, "cg2900_test_read count %d\n", count);
+
+ if (skb_queue_empty(rx_queue))
+ wait_event_interruptible(char_wait_queue,
+ !(skb_queue_empty(rx_queue)));
+
+ skb = skb_dequeue(rx_queue);
+ if (!skb) {
+ dev_dbg(MISC_DEV,
+ "skb queue is empty - return with zero bytes\n");
+ bytes_to_copy = 0;
+ goto finished;
+ }
+
+ bytes_to_copy = min(count, skb->len);
+ err = copy_to_user(buf, skb->data, bytes_to_copy);
+ if (err) {
+ skb_queue_head(rx_queue, skb);
+ return -EFAULT;
+ }
+
+ skb_pull(skb, bytes_to_copy);
+
+ if (skb->len > 0)
+ skb_queue_head(rx_queue, skb);
+ else
+ kfree_skb(skb);
+
+finished:
+ return bytes_to_copy;
+}
+
+/**
+ * cg2900_test_write() - Copy buffer from user and write to CG2900 Core.
+ * @filp: Pointer to the file struct.
+ * @buf: Read buffer.
+ * @count: Size of the buffer write.
+ * @f_pos: Position in buffer.
+ *
+ * Returns:
+ * >= 0 is number of bytes written.
+ * -EFAULT if copy_from_user fails.
+ */
+static ssize_t cg2900_test_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *f_pos)
+{
+ struct sk_buff *skb;
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+
+ dev_dbg(MISC_DEV, "cg2900_test_write count %d\n", count);
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(count + RX_SKB_RESERVE, GFP_KERNEL);
+ if (!skb) {
+ dev_err(MISC_DEV, "cg2900_test_write: Failed to alloc skb\n");
+ return -ENOMEM;
+ }
+ skb_reserve(skb, RX_SKB_RESERVE);
+
+ if (copy_from_user(skb_put(skb, count), buf, count)) {
+ kfree_skb(skb);
+ return -EFAULT;
+ }
+
+ dev->c_cb.data_from_chip(dev, skb);
+
+ return count;
+}
+
+/**
+ * cg2900_test_poll() - Handle POLL call to the interface.
+ * @filp: Pointer to the file struct.
+ * @wait: Poll table supplied to caller.
+ *
+ * Returns:
+ * Mask of current set POLL values (0 or (POLLIN | POLLRDNORM))
+ */
+static unsigned int cg2900_test_poll(struct file *filp, poll_table *wait)
+{
+ struct cg2900_chip_dev *dev = filp->private_data;
+ struct test_info *info = dev->t_data;
+ unsigned int mask = 0;
+
+ poll_wait(filp, &char_wait_queue, wait);
+
+ if (!(skb_queue_empty(&info->rx_queue)))
+ mask |= POLLIN | POLLRDNORM;
+
+ return mask;
+}
+
+static const struct file_operations test_char_dev_fops = {
+ .open = cg2900_test_open,
+ .release = cg2900_test_release,
+ .read = cg2900_test_read,
+ .write = cg2900_test_write,
+ .poll = cg2900_test_poll
+};
+
+/**
+ * test_char_dev_create() - Create a char device for testing.
+ * @info: Test device info.
+ *
+ * Creates a separate char device that will interact directly with userspace
+ * test application.
+ *
+ * Returns:
+ * 0 if there is no error.
+ * Error codes from misc_register.
+ */
+static int test_char_dev_create(struct test_info *info)
+{
+ int err;
+
+ /* Initialize the RX queue */
+ skb_queue_head_init(&info->rx_queue);
+
+ /* Prepare miscdevice struct before registering the device */
+ info->misc_dev.minor = MISC_DYNAMIC_MINOR;
+ info->misc_dev.name = CG2900_CDEV_NAME;
+ info->misc_dev.fops = &test_char_dev_fops;
+ info->misc_dev.parent = info->dev;
+ info->misc_dev.mode = S_IRUGO | S_IWUGO;
+
+ err = misc_register(&info->misc_dev);
+ if (err) {
+ dev_err(info->dev, "Error %d registering misc dev", err);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * test_char_dev_destroy() - Clean up after test_char_dev_create().
+ * @info: Test device info.
+ */
+static void test_char_dev_destroy(struct test_info *info)
+{
+ int err;
+
+ err = misc_deregister(&info->misc_dev);
+ if (err)
+ dev_err(info->dev, "Error %d deregistering misc dev\n", err);
+
+ /* Clean the message queue */
+ skb_queue_purge(&info->rx_queue);
+}
+
+/**
+ * cg2900_test_probe() - Initialize module.
+ *
+ * @pdev: Platform device.
+ *
+ * This function initializes and registers the test misc char device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * -EEXIST if device already exists.
+ * Error codes generated by test_char_dev_create.
+ */
+static int __devinit cg2900_test_probe(struct platform_device *pdev)
+{
+ int err;
+
+ dev_dbg(&pdev->dev, "cg2900_test_probe\n");
+
+ if (test_info) {
+ dev_err(&pdev->dev, "test_info exists\n");
+ return -EEXIST;
+ }
+
+ test_info = kzalloc(sizeof(*test_info), GFP_KERNEL);
+ if (!test_info) {
+ dev_err(&pdev->dev, "Couldn't allocate test_info\n");
+ return -ENOMEM;
+ }
+
+ test_info->dev = &pdev->dev;
+ test_info->pdev = pdev;
+
+ /* Create and add test char device. */
+ err = test_char_dev_create(test_info);
+ if (err) {
+ kfree(test_info);
+ test_info = NULL;
+ return err;
+ }
+
+ dev_set_drvdata(&pdev->dev, test_info);
+
+ dev_info(&pdev->dev, "CG2900 test char device driver started\n");
+
+ return 0;
+}
+
+/**
+ * cg2900_test_remove() - Remove module.
+ *
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM if core_info does not exist.
+ * -EINVAL if platform data does not exist in the device.
+ */
+static int __devexit cg2900_test_remove(struct platform_device *pdev)
+{
+ struct test_info *test_info;
+
+ dev_dbg(&pdev->dev, "cg2900_test_remove\n");
+ test_info = dev_get_drvdata(&pdev->dev);
+ test_char_dev_destroy(test_info);
+ dev_set_drvdata(&pdev->dev, NULL);
+ kfree(test_info);
+ test_info = NULL;
+ dev_info(&pdev->dev, "CG2900 Test char device driver removed\n");
+ return 0;
+}
+
+static struct platform_driver cg2900_test_driver = {
+ .driver = {
+ .name = "cg2900-test",
+ .owner = THIS_MODULE,
+ },
+ .probe = cg2900_test_probe,
+ .remove = __devexit_p(cg2900_test_remove),
+};
+
+/**
+ * cg2900_test_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init cg2900_test_init(void)
+{
+ pr_debug("cg2900_test_init");
+ return platform_driver_register(&cg2900_test_driver);
+}
+
+/**
+ * cg2900_test_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit cg2900_test_exit(void)
+{
+ pr_debug("cg2900_test_exit");
+ platform_driver_unregister(&cg2900_test_driver);
+}
+
+module_init(cg2900_test_init);
+module_exit(cg2900_test_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux CG2900 Test Char Device Driver");
diff --git a/drivers/staging/cg2900/mfd/stlc2690_chip.c b/drivers/staging/cg2900/mfd/stlc2690_chip.c
new file mode 100644
index 0000000..a1167d9
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/stlc2690_chip.c
@@ -0,0 +1,1653 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson STLC2690 BT/FM controller.
+ */
+#define NAME "stlc2690_chip"
+#define pr_fmt(fmt) NAME ": " fmt "\n"
+
+#include <asm/byteorder.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gfp.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/stat.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/core.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "cg2900.h"
+#include "cg2900_core.h"
+#include "cg2900_lib.h"
+#include "stlc2690_chip.h"
+
+#define MAIN_DEV (main_info->dev)
+#define BOOT_DEV (info->user_in_charge->dev)
+
+#define WQ_NAME "stlc2690_chip_wq"
+
+#define LINE_TOGGLE_DETECT_TIMEOUT 50 /* ms */
+#define CHIP_READY_TIMEOUT 100 /* ms */
+#define CHIP_STARTUP_TIMEOUT 15000 /* ms */
+#define CHIP_SHUTDOWN_TIMEOUT 15000 /* ms */
+
+/** CHANNEL_BT_CMD - Bluetooth HCI H:4 channel
+ * for Bluetooth commands in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_CMD 0x01
+
+/** CHANNEL_BT_ACL - Bluetooth HCI H:4 channel
+ * for Bluetooth ACL data in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_ACL 0x02
+
+/** CHANNEL_BT_EVT - Bluetooth HCI H:4 channel
+ * for Bluetooth events in the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_BT_EVT 0x04
+
+/** CHANNEL_HCI_LOGGER - Bluetooth HCI H:4 channel
+ * for logging all transmitted H4 packets (on all channels).
+ */
+#define CHANNEL_HCI_LOGGER 0xFA
+
+/** CHANNEL_CORE - Bluetooth HCI H:4 channel
+ * for user space control of the ST-Ericsson connectivity controller.
+ */
+#define CHANNEL_CORE 0xFD
+
+/*
+ * For the char dev names we keep the same names in order to be able to reuse
+ * the users and to keep a consistent interface.
+ */
+
+/** STLC2690_BT_CMD - Bluetooth HCI H4 channel for Bluetooth commands.
+ */
+#define STLC2690_BT_CMD "cg2900_bt_cmd"
+
+/** STLC2690_BT_ACL - Bluetooth HCI H4 channel for Bluetooth ACL data.
+ */
+#define STLC2690_BT_ACL "cg2900_bt_acl"
+
+/** STLC2690_BT_EVT - Bluetooth HCI H4 channel for Bluetooth events.
+ */
+#define STLC2690_BT_EVT "cg2900_bt_evt"
+
+/** STLC2690_HCI_LOGGER - BT channel for logging all transmitted H4 packets.
+ * Data read is copy of all data transferred on the other channels.
+ * Only write allowed is configuration of the HCI Logger.
+ */
+#define STLC2690_HCI_LOGGER "cg2900_hci_logger"
+
+/** STLC2690_CORE- Channel for keeping ST-Ericsson STLC2690 enabled.
+ * Opening this channel forces the chip to stay powered.
+ * No data can be written to or read from this channel.
+ */
+#define STLC2690_CORE "cg2900_core"
+
+/**
+ * enum main_state - Main-state for STLC2690 driver.
+ * @STLC2690_INIT: STLC2690 initializing.
+ * @STLC2690_IDLE: No user registered to STLC2690 driver.
+ * @STLC2690_BOOTING: STLC2690 booting after first user is registered.
+ * @STLC2690_CLOSING: STLC2690 closing after last user has deregistered.
+ * @STLC2690_RESETING: STLC2690 reset requested.
+ * @STLC2690_ACTIVE: STLC2690 up and running with at least one user.
+ */
+enum main_state {
+ STLC2690_INIT,
+ STLC2690_IDLE,
+ STLC2690_BOOTING,
+ STLC2690_CLOSING,
+ STLC2690_RESETING,
+ STLC2690_ACTIVE
+};
+
+/**
+ * enum boot_state - BOOT-state for STLC2690 chip driver.
+ * @BOOT_RESET: HCI Reset has been sent.
+ * @BOOT_SEND_BD_ADDRESS: VS Store In FS command with BD address
+ * has been sent.
+ * @BOOT_GET_FILES_TO_LOAD: STLC2690 chip driver is retrieving file
+ * to load.
+ * @BOOT_DOWNLOAD_PATCH: STLC2690 chip driver is downloading
+ * patches.
+ * @BOOT_ACTIVATE_PATCHES_AND_SETTINGS: STLC2690 chip driver is activating
+ * patches and settings.
+ * @BOOT_READY: STLC2690 chip driver boot is ready.
+ * @BOOT_FAILED: STLC2690 chip driver boot failed.
+ */
+enum boot_state {
+ BOOT_RESET,
+ BOOT_SEND_BD_ADDRESS,
+ BOOT_GET_FILES_TO_LOAD,
+ BOOT_DOWNLOAD_PATCH,
+ BOOT_ACTIVATE_PATCHES_AND_SETTINGS,
+ BOOT_READY,
+ BOOT_FAILED
+};
+
+/**
+ * enum file_load_state - BOOT_FILE_LOAD-state for STLC2690 chip driver.
+ * @FILE_LOAD_GET_PATCH: Loading patches.
+ * @FILE_LOAD_GET_STATIC_SETTINGS: Loading static settings.
+ * @FILE_LOAD_NO_MORE_FILES: No more files to load.
+ * @FILE_LOAD_FAILED: File loading failed.
+ */
+enum file_load_state {
+ FILE_LOAD_GET_PATCH,
+ FILE_LOAD_GET_STATIC_SETTINGS,
+ FILE_LOAD_NO_MORE_FILES,
+ FILE_LOAD_FAILED
+};
+
+/**
+ * enum download_state - BOOT_DOWNLOAD state.
+ * @DOWNLOAD_PENDING: Download in progress.
+ * @DOWNLOAD_SUCCESS: Download successfully finished.
+ * @DOWNLOAD_FAILED: Downloading failed.
+ */
+enum download_state {
+ DOWNLOAD_PENDING,
+ DOWNLOAD_SUCCESS,
+ DOWNLOAD_FAILED
+};
+
+
+/**
+ * struct stlc2690_channel_item - List object for channel.
+ * @list: list_head struct.
+ * @user: User for this channel.
+ */
+struct stlc2690_channel_item {
+ struct list_head list;
+ struct cg2900_user_data *user;
+};
+
+/**
+ * struct stlc2690_skb_data - Structure for storing private data in an sk_buffer.
+ * @dev: STLC2690 device for this sk_buffer.
+ */
+struct stlc2690_skb_data {
+ struct cg2900_user_data *user;
+};
+#define stlc2690_skb_data(__skb) ((struct stlc2690_skb_data *)((__skb)->cb))
+
+/**
+ * struct stlc2690_chip_info - Main info structure for STLC2690 chip driver.
+ * @patch_file_name: Stores patch file name.
+ * @settings_file_name: Stores settings file name.
+ * @file_info: Firmware file info (patch or settings).
+ * @main_state: Current MAIN-state of STLC2690 chip driver.
+ * @boot_state: Current BOOT-state of STLC2690 chip driver.
+ * @file_load_state: Current BOOT_FILE_LOAD-state of STLC2690 chip
+ * driver.
+ * @download_state: Current BOOT_DOWNLOAD-state of STLC2690 chip
+ * driver.
+ * @wq: STLC2690 chip driver workqueue.
+ * @chip_dev: Chip handler info.
+ * @user_in_charge: User currently operating. Normally used at
+ * channel open and close.
+ * @last_user: Last user of this chip.
+ * @logger: Logger user of this chip.
+ */
+struct stlc2690_chip_info {
+ char *patch_file_name;
+ char *settings_file_name;
+ struct cg2900_file_info file_info;
+ enum main_state main_state;
+ enum boot_state boot_state;
+ enum file_load_state file_load_state;
+ enum download_state download_state;
+ struct workqueue_struct *wq;
+ struct cg2900_chip_dev *chip_dev;
+ spinlock_t rw_lock;
+ struct list_head open_channels;
+ struct cg2900_user_data *user_in_charge;
+ struct cg2900_user_data *last_user;
+ struct cg2900_user_data *logger;
+};
+
+/**
+ * struct main_info - Main info structure for STLC2690 chip driver.
+ * @dev: Device structure.
+ * @cell_base_id: Base ID for MFD cells.
+ * @man_mutex: Management mutex.
+ */
+struct main_info {
+ struct device *dev;
+ int cell_base_id;
+ struct mutex man_mutex;
+};
+
+static struct main_info *main_info;
+
+/*
+ * main_wait_queue - Main Wait Queue in STLC2690 driver.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(main_wait_queue);
+
+static void chip_startup_finished(struct stlc2690_chip_info *info, int err);
+
+/**
+ * send_bd_address() - Send HCI VS command with BD address to the chip.
+ */
+static void send_bd_address(struct stlc2690_chip_info *info)
+{
+ struct bt_vs_store_in_fs_cmd *cmd;
+ u8 plen = sizeof(*cmd) + BT_BDADDR_SIZE;
+
+ cmd = kmalloc(plen, GFP_KERNEL);
+ if (!cmd)
+ return;
+
+ cmd->opcode = cpu_to_le16(STLC2690_BT_OP_VS_STORE_IN_FS);
+ cmd->plen = BT_PARAM_LEN(plen);
+ cmd->user_id = STLC2690_VS_STORE_IN_FS_USR_ID_BD_ADDR;
+ cmd->len = BT_BDADDR_SIZE;
+ /* Now copy the BD address received from user space control app. */
+ memcpy(cmd->data, bd_address, BT_BDADDR_SIZE);
+
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_SEND_BD_ADDRESS\n");
+ info->boot_state = BOOT_SEND_BD_ADDRESS;
+
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, cmd, plen);
+
+ kfree(cmd);
+}
+
+/**
+ * send_settings_file() - Transmit settings file.
+ *
+ * The send_settings_file() function transmit settings file.
+ * The file is read in parts to fit in HCI packets. When finished,
+ * close the settings file and send HCI reset to activate settings and patches.
+ */
+static void send_settings_file(struct stlc2690_chip_info *info)
+{
+ int bytes_sent;
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_settings_file: Error %d occurred\n",
+ bytes_sent);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, bytes_sent);
+ return;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ /* Settings file finished. Release used resources */
+ dev_dbg(BOOT_DEV, "Settings file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_NO_MORE_FILES\n");
+ info->file_load_state = FILE_LOAD_NO_MORE_FILES;
+
+ /* Create and send HCI VS Store In FS command with bd address. */
+ send_bd_address(info);
+}
+
+/**
+ * send_patch_file - Transmit patch file.
+ *
+ * The send_patch_file() function transmit patch file.
+ * The file is read in parts to fit in HCI packets. When the complete file is
+ * transmitted, the file is closed.
+ * When finished, continue with settings file.
+ */
+static void send_patch_file(struct cg2900_chip_dev *dev)
+{
+ int err;
+ int bytes_sent;
+ struct stlc2690_chip_info *info = dev->c_data;
+ int file_name_size = strlen("STLC2690_XXXX_XXXX_settings.fw");
+
+ bytes_sent = cg2900_read_and_send_file_part(info->user_in_charge,
+ info->logger,
+ &info->file_info);
+ if (bytes_sent > 0) {
+ /* Data sent. Wait for CmdComplete */
+ return;
+ } else if (bytes_sent < 0) {
+ dev_err(BOOT_DEV, "send_patch_file: Error %d occurred\n",
+ bytes_sent);
+ err = bytes_sent;
+ goto error_handling;
+ }
+
+ /* No data was sent. This file is finished */
+ info->download_state = DOWNLOAD_SUCCESS;
+
+ dev_dbg(BOOT_DEV, "Patch file finished, release used resources\n");
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+
+ /*
+ * Create the settings file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->settings_file_name, file_name_size + 1,
+ "STLC2690_%04X_%04X_settings.fw",
+ dev->chip.hci_revision, dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading settings file %s\n",
+ info->settings_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Settings file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* Retrieve the settings file */
+ err = request_firmware(&info->file_info.fw_file,
+ info->settings_file_name,
+ info->chip_dev->dev);
+ if (err) {
+ dev_err(BOOT_DEV, "Couldn't get settings file (%d)\n", err);
+ goto error_handling;
+ }
+ /* Now send the settings file */
+ dev_dbg(BOOT_DEV,
+ "New file_load_state: FILE_LOAD_GET_STATIC_SETTINGS\n");
+ info->file_load_state = FILE_LOAD_GET_STATIC_SETTINGS;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ send_settings_file(info);
+ return;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, err);
+}
+
+/**
+ * work_reset_after_error() - Handle reset.
+ * @work: Reference to work data.
+ *
+ * Handle a reset after received Command Complete event.
+ */
+static void work_reset_after_error(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_reset_after_error: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ chip_startup_finished(info, -EIO);
+
+ kfree(my_work);
+}
+
+/**
+ * work_load_patch_and_settings() - Start loading patches and settings.
+ * @work: Reference to work data.
+ */
+static void work_load_patch_and_settings(struct work_struct *work)
+{
+ int err = 0;
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+ int file_name_size = strlen("STLC2690_XXXX_XXXX_patch.fw");
+
+ if (!work) {
+ dev_err(MAIN_DEV,
+ "work_load_patch_and_settings: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Check that we are in the right state */
+ if (info->boot_state != BOOT_GET_FILES_TO_LOAD)
+ goto finished;
+
+ /*
+ * Create the patch file name from HCI revision and sub_version.
+ * file_name_size does not include terminating NULL character
+ * so add 1.
+ */
+ err = snprintf(info->patch_file_name, file_name_size + 1,
+ "STLC2690_%04X_%04X_patch.fw", dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ if (err == file_name_size) {
+ dev_dbg(BOOT_DEV, "Downloading patch file %s\n",
+ info->patch_file_name);
+ } else {
+ dev_err(BOOT_DEV, "Patch file name failed! err=%d\n", err);
+ goto error_handling;
+ }
+
+ /* We now all info needed */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_DOWNLOAD_PATCH\n");
+ info->boot_state = BOOT_DOWNLOAD_PATCH;
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_PENDING\n");
+ info->download_state = DOWNLOAD_PENDING;
+ dev_dbg(BOOT_DEV, "New file_load_state: FILE_LOAD_GET_PATCH\n");
+ info->file_load_state = FILE_LOAD_GET_PATCH;
+ info->file_info.chunk_id = 0;
+ info->file_info.file_offset = 0;
+ info->file_info.fw_file = NULL;
+
+ /* OK. Now it is time to download the patches */
+ err = request_firmware(&(info->file_info.fw_file),
+ info->patch_file_name,
+ dev->dev);
+ if (err < 0) {
+ dev_err(BOOT_DEV, "Couldn't get patch file (%d)\n", err);
+ goto error_handling;
+ }
+ send_patch_file(dev);
+
+ goto finished;
+
+error_handling:
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ chip_startup_finished(info, -EIO);
+finished:
+ kfree(my_work);
+}
+
+/**
+ * work_cont_file_download() - A file block has been written.
+ * @work: Reference to work data.
+ *
+ * Handle a received HCI VS Write File Block Complete event.
+ * Normally this means continue to send files to the controller.
+ */
+static void work_cont_file_download(struct work_struct *work)
+{
+ struct cg2900_work *my_work;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ if (!work) {
+ dev_err(MAIN_DEV, "work_cont_file_download: work == NULL\n");
+ return;
+ }
+
+ my_work = container_of(work, struct cg2900_work, work);
+ dev = my_work->user_data;
+ info = dev->c_data;
+
+ /* Continue to send patches or settings to the controller */
+ if (info->file_load_state == FILE_LOAD_GET_PATCH)
+ send_patch_file(dev);
+ else if (info->file_load_state == FILE_LOAD_GET_STATIC_SETTINGS)
+ send_settings_file(info);
+ else
+ dev_dbg(BOOT_DEV, "No more files to load\n");
+
+ kfree(my_work);
+}
+
+/**
+ * handle_reset_cmd_complete() - Handles HCI Reset Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_reset_cmd_complete(struct cg2900_chip_dev *dev, u8 *data)
+{
+ u8 status = data[0];
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV, "Received Reset complete event with status 0x%X\n",
+ status);
+
+ if (BOOT_RESET != info->boot_state &&
+ BOOT_ACTIVATE_PATCHES_AND_SETTINGS != info->boot_state)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV, "Command complete for HciReset received with "
+ "error 0x%X\n", status);
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ return true;
+ }
+
+ if (BOOT_RESET == info->boot_state) {
+ info->boot_state = BOOT_GET_FILES_TO_LOAD;
+ cg2900_create_work_item(info->wq, work_load_patch_and_settings,
+ dev);
+ } else {
+ /*
+ * The boot sequence is now finished successfully.
+ * Set states and signal to waiting thread.
+ */
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_READY\n");
+ info->boot_state = BOOT_READY;
+ chip_startup_finished(info, 0);
+ }
+
+ return true;
+}
+
+
+/**
+ * handle_vs_store_in_fs_cmd_complete() - Handles HCI VS StoreInFS Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_store_in_fs_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ dev_dbg(BOOT_DEV,
+ "Received Store_in_FS complete event with status 0x%X\n",
+ status);
+
+ if (info->boot_state != BOOT_SEND_BD_ADDRESS)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status) {
+ struct hci_command_hdr cmd;
+
+ /* Send HCI Reset command to activate patches */
+ dev_dbg(BOOT_DEV,
+ "New boot_state: BOOT_ACTIVATE_PATCHES_AND_SETTINGS\n");
+ info->boot_state = BOOT_ACTIVATE_PATCHES_AND_SETTINGS;
+
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for Reset */
+ cg2900_send_bt_cmd(info->user_in_charge, info->logger, &cmd,
+ sizeof(cmd));
+ } else {
+ dev_err(BOOT_DEV,
+ "Command complete for StoreInFS received with error "
+ "0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_complete() - Handles HCI VS WriteFileBlock Command Complete event.
+ * @data: Pointer to received HCI data packet.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_complete(struct cg2900_chip_dev *dev,
+ u8 *data)
+{
+ u8 status = data[0];
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ if (HCI_BT_ERROR_NO_ERROR == status)
+ cg2900_create_work_item(info->wq, work_cont_file_download, dev);
+ else {
+ dev_err(BOOT_DEV,
+ "Command complete for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_vs_write_file_block_cmd_status() - Handles HCI VS WriteFileBlock Command Status event.
+ * @status: Returned status of WriteFileBlock command.
+ *
+ * Returns:
+ * true, if packet was handled internally,
+ * false, otherwise.
+ */
+static bool handle_vs_write_file_block_cmd_status(struct cg2900_chip_dev *dev,
+ u8 status)
+{
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ if (info->boot_state != BOOT_DOWNLOAD_PATCH ||
+ info->download_state != DOWNLOAD_PENDING)
+ return false;
+
+ /*
+ * Only do something if there is an error. Otherwise we will wait for
+ * CmdComplete.
+ */
+ if (HCI_BT_ERROR_NO_ERROR != status) {
+ dev_err(BOOT_DEV,
+ "Command status for WriteFileBlock received with"
+ " error 0x%X\n", status);
+ dev_dbg(BOOT_DEV, "New download_state: DOWNLOAD_FAILED\n");
+ info->download_state = DOWNLOAD_FAILED;
+ dev_dbg(BOOT_DEV, "New boot_state: BOOT_FAILED\n");
+ info->boot_state = BOOT_FAILED;
+ if (info->file_info.fw_file) {
+ release_firmware(info->file_info.fw_file);
+ info->file_info.fw_file = NULL;
+ }
+ cg2900_create_work_item(info->wq, work_reset_after_error, dev);
+ }
+
+ return true;
+}
+
+/**
+ * handle_rx_data_bt_evt() - Check if received data should be handled in STLC2690 chip driver.
+ * @skb: Data packet
+ *
+ * The handle_rx_data_bt_evt() function checks if received data should be
+ * handled in STLC2690 chip driver. If so handle it correctly.
+ * Received data is always HCI BT Event.
+ *
+ * Returns:
+ * True, if packet was handled internally,
+ * False, otherwise.
+ */
+static bool handle_rx_data_bt_evt(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ bool pkt_handled = false;
+ /* skb cannot be NULL here so it is safe to de-reference */
+ u8 *data = skb->data;
+ struct hci_event_hdr *evt;
+ u16 op_code;
+
+ evt = (struct hci_event_hdr *)data;
+ data += sizeof(*evt);
+
+ /* First check the event code. */
+ if (HCI_EV_CMD_COMPLETE == evt->evt) {
+ struct hci_ev_cmd_complete *cmd_complete;
+
+ cmd_complete = (struct hci_ev_cmd_complete *)data;
+ op_code = le16_to_cpu(cmd_complete->opcode);
+ dev_dbg(dev->dev,
+ "Received Command Complete: op_code = 0x%04X\n",
+ op_code);
+ /* Move to first byte after OCF */
+ data += sizeof(*cmd_complete);
+
+ if (op_code == HCI_OP_RESET)
+ pkt_handled = handle_reset_cmd_complete(dev, data);
+ else if (op_code == STLC2690_BT_OP_VS_STORE_IN_FS)
+ pkt_handled = handle_vs_store_in_fs_cmd_complete(dev,
+ data);
+ else if (op_code == STLC2690_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled =
+ handle_vs_write_file_block_cmd_complete(dev,
+ data);
+ } else if (HCI_EV_CMD_STATUS == evt->evt) {
+ struct hci_ev_cmd_status *cmd_status;
+
+ cmd_status = (struct hci_ev_cmd_status *)data;
+
+ op_code = le16_to_cpu(cmd_status->opcode);
+
+ dev_dbg(dev->dev, "Received Command Status: op_code = 0x%04X\n",
+ op_code);
+
+ if (op_code == STLC2690_BT_OP_VS_WRITE_FILE_BLOCK)
+ pkt_handled = handle_vs_write_file_block_cmd_status
+ (dev, cmd_status->status);
+ } else if (HCI_EV_HW_ERROR == evt->evt) {
+ struct hci_ev_hw_error *hw_error;
+
+ hw_error = (struct hci_ev_hw_error *)data;
+ /*
+ * Only do a printout. There might be a receiving stack that can
+ * handle this event
+ */
+ dev_err(dev->dev, "HW Error event received with error 0x%02X\n",
+ hw_error->hw_code);
+ return false;
+ } else
+ return false;
+
+ if (pkt_handled)
+ kfree_skb(skb);
+
+ return pkt_handled;
+}
+
+/**
+ * data_from_chip() - Called when data is received from the chip.
+ * @dev: Chip info.
+ * @skb: Packet received.
+ *
+ * The data_from_chip() function checks if packet is a response for a packet it
+ * itself has transmitted. If not it finds the correct user and sends the packet
+ * to the user.
+ */
+static void data_from_chip(struct cg2900_chip_dev *dev,
+ struct sk_buff *skb)
+{
+ int h4_channel;
+ struct list_head *cursor;
+ struct stlc2690_channel_item *tmp;
+ struct stlc2690_chip_info *info = dev->c_data;
+ struct cg2900_user_data *user = NULL;
+
+ h4_channel = skb->data[0];
+ skb_pull(skb, HCI_H4_SIZE);
+
+ /* Then check if this is a response to data we have sent */
+ if (h4_channel == CHANNEL_BT_EVT && handle_rx_data_bt_evt(dev, skb))
+ return;
+
+ spin_lock_bh(&info->rw_lock);
+
+ /* Let's see if this packet has the same user as the last one */
+ if (info->last_user && info->last_user->h4_channel == h4_channel) {
+ user = info->last_user;
+ goto user_found;
+ }
+
+ /* Search through the list of all open channels to find the user */
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ if (tmp->user->h4_channel == h4_channel) {
+ user = tmp->user;
+ goto user_found;
+ }
+ }
+
+user_found:
+ info->last_user = user;
+ spin_unlock_bh(&info->rw_lock);
+
+ if (user)
+ user->read_cb(user, skb);
+ else {
+ dev_err(dev->dev,
+ "Could not find corresponding user to h4_channel %d\n",
+ h4_channel);
+ kfree_skb(skb);
+ }
+}
+
+static void chip_removed(struct cg2900_chip_dev *dev)
+{
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ mfd_remove_devices(dev->dev);
+ kfree(info->settings_file_name);
+ kfree(info->patch_file_name);
+ destroy_workqueue(info->wq);
+ kfree(info);
+ dev->c_data = NULL;
+ dev->c_cb.chip_removed = NULL;
+ dev->c_cb.data_from_chip = NULL;
+}
+
+/**
+ * chip_shutdown() - Reset and power the chip off.
+ */
+static void chip_shutdown(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev = cg2900_get_prv(user);
+ struct stlc2690_chip_info *info = dev->c_data;
+
+ dev_dbg(user->dev, "chip_shutdown\n");
+
+ /* Close the transport, which will power off the chip */
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ /* Chip shut-down finished, set correct state and wake up the chip. */
+ dev_dbg(dev->dev, "New main_state: STLC2690_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+ wake_up_all(&main_wait_queue);
+}
+
+static void chip_startup_finished(struct stlc2690_chip_info *info, int err)
+{
+ dev_dbg(BOOT_DEV, "chip_startup_finished (%d)\n", err);
+
+ if (err)
+ /* Shutdown the chip */
+ chip_shutdown(info->user_in_charge);
+ else {
+ dev_dbg(BOOT_DEV, "New main_state: CORE_ACTIVE\n");
+ info->main_state = STLC2690_ACTIVE;
+ }
+
+ wake_up_all(&main_wait_queue);
+
+ if (err)
+ return;
+
+ if (!info->chip_dev->t_cb.chip_startup_finished)
+ dev_err(BOOT_DEV, "chip_startup_finished callback not found\n");
+ else
+ info->chip_dev->t_cb.chip_startup_finished(info->chip_dev);
+}
+
+static int stlc2690_open(struct cg2900_user_data *user)
+{
+ int err;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+ struct list_head *cursor;
+ struct stlc2690_channel_item *tmp;
+ struct hci_command_hdr cmd;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "stlc2690_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "stlc2690_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /* Add a minor wait in order to avoid CPU blocking, looping openings */
+ err = wait_event_timeout(main_wait_queue,
+ (STLC2690_IDLE == info->main_state ||
+ STLC2690_ACTIVE == info->main_state),
+ msecs_to_jiffies(LINE_TOGGLE_DETECT_TIMEOUT));
+ if (err <= 0) {
+ if (STLC2690_INIT == info->main_state)
+ dev_err(user->dev, "Transport not opened\n");
+ else
+ dev_err(user->dev, "stlc2690_open currently busy "
+ "(0x%X). Try again\n", info->main_state);
+ err = -EBUSY;
+ goto err_free_mutex;
+ }
+
+ err = 0;
+
+ list_for_each(cursor, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ if (tmp->user->h4_channel == user->h4_channel) {
+ dev_err(user->dev, "Channel %d is already opened\n",
+ user->h4_channel);
+ err = -EACCES;
+ goto err_free_mutex;
+ }
+ }
+
+ tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
+ if (!tmp) {
+ dev_err(user->dev, "Could not allocate tmp\n");
+ err = -ENOMEM;
+ goto err_free_mutex;
+ }
+ tmp->user = user;
+
+ if (STLC2690_ACTIVE != info->main_state &&
+ !user->chip_independent) {
+ /* Open transport and start-up the chip */
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, true);
+
+ /* Wait to be sure that the chip is ready */
+ schedule_timeout_killable(
+ msecs_to_jiffies(CHIP_READY_TIMEOUT));
+
+ if (dev->t_cb.open)
+ err = dev->t_cb.open(dev);
+ if (err) {
+ if (dev->t_cb.set_chip_power)
+ dev->t_cb.set_chip_power(dev, false);
+ goto err_free_list_item;
+ }
+
+ /* Start the boot sequence */
+ info->user_in_charge = user;
+ info->last_user = user;
+ dev_dbg(user->dev, "New boot_state: BOOT_RESET\n");
+ info->boot_state = BOOT_RESET;
+ dev_dbg(user->dev, "New main_state: STLC2690_BOOTING\n");
+ info->main_state = STLC2690_BOOTING;
+ cmd.opcode = cpu_to_le16(HCI_OP_RESET);
+ cmd.plen = 0; /* No parameters for HCI reset */
+ cg2900_send_bt_cmd(user, info->logger, &cmd, sizeof(cmd));
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to start\n");
+ wait_event_timeout(main_wait_queue,
+ (STLC2690_ACTIVE == info->main_state ||
+ STLC2690_IDLE == info->main_state),
+ msecs_to_jiffies(CHIP_STARTUP_TIMEOUT));
+ if (STLC2690_ACTIVE != info->main_state) {
+ dev_err(user->dev, "STLC2690 driver failed to start\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CORE_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+ err = -EIO;
+ goto err_free_list_item;
+ }
+ }
+
+ list_add_tail(&tmp->list, &info->open_channels);
+
+ user->opened = true;
+
+ dev_dbg(user->dev, "H:4 channel opened\n");
+
+ mutex_unlock(&main_info->man_mutex);
+ return 0;
+err_free_list_item:
+ kfree(tmp);
+err_free_mutex:
+ mutex_unlock(&main_info->man_mutex);
+ return err;
+}
+
+static int stlc2690_hci_log_open(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+ int err;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_hci_log_open: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(user->dev, "stlc2690_hci_log_open\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ if (info->logger) {
+ dev_err(user->dev, "HCI Logger already stored\n");
+ return -EACCES;
+ }
+
+ info->logger = user;
+ err = stlc2690_open(user);
+ if (err)
+ info->logger = NULL;
+ return err;
+}
+
+static void stlc2690_close(struct cg2900_user_data *user)
+{
+ bool keep_powered = false;
+ struct list_head *cursor, *next;
+ struct stlc2690_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "stlc2690_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ mutex_lock(&main_info->man_mutex);
+
+ /*
+ * Go through each open channel. Remove our channel and check if there
+ * is any other channel that want to keep the chip running
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ if (tmp->user == user) {
+ list_del(cursor);
+ kfree(tmp);
+ } else if (!tmp->user->chip_independent)
+ keep_powered = true;
+ }
+
+ if (keep_powered)
+ /* This was not the last user, we're done. */
+ goto finished;
+
+ if (STLC2690_IDLE == info->main_state)
+ /* Chip has already been shut down. */
+ goto finished;
+
+ dev_dbg(user->dev, "New main_state: CORE_CLOSING\n");
+ info->main_state = STLC2690_CLOSING;
+ chip_shutdown(user);
+
+ dev_dbg(user->dev, "Wait up to 15 seconds for chip to shut-down\n");
+ wait_event_timeout(main_wait_queue,
+ STLC2690_IDLE == info->main_state,
+ msecs_to_jiffies(CHIP_SHUTDOWN_TIMEOUT));
+
+ /* Force shutdown if we timed out */
+ if (STLC2690_IDLE != info->main_state) {
+ dev_err(user->dev,
+ "ST-Ericsson STLC2690 Core Driver was shut-down with "
+ "problems\n");
+
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(user->dev, "New main_state: CORE_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+ }
+
+finished:
+ mutex_unlock(&main_info->man_mutex);
+ user->opened = false;
+ dev_dbg(user->dev, "H:4 channel closed\n");
+}
+
+static void stlc2690_hci_log_close(struct cg2900_user_data *user)
+{
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_hci_log_close: Calling with NULL pointer\n");
+ return;
+ }
+
+ dev_dbg(user->dev, "stlc2690_hci_log_close\n");
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ info->logger = NULL;
+ stlc2690_close(user);
+}
+
+static int stlc2690_reset(struct cg2900_user_data *user)
+{
+ struct list_head *cursor, *next;
+ struct stlc2690_channel_item *tmp;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_reset: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_info(user->dev, "stlc2690_reset\n");
+
+ BUG_ON(!main_info);
+
+ mutex_lock(&main_info->man_mutex);
+
+ dev_dbg(user->dev, "New main_state: CORE_RESETING\n");
+ info->main_state = STLC2690_RESETING;
+
+ chip_shutdown(user);
+
+ /*
+ * Inform all opened channels about the reset and free the user devices
+ */
+ list_for_each_safe(cursor, next, &info->open_channels) {
+ tmp = list_entry(cursor, struct stlc2690_channel_item, list);
+ list_del(cursor);
+ tmp->user->opened = false;
+ tmp->user->reset_cb(tmp->user);
+ kfree(tmp);
+ }
+
+ /* Reset finished. We are now idle until first channel is opened */
+ dev_dbg(user->dev, "New main_state: STLC2690_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+
+ mutex_unlock(&main_info->man_mutex);
+
+ /*
+ * Send wake-up since this might have been called from a failed boot.
+ * No harm done if it is a STLC2690 chip user who called.
+ */
+ wake_up_all(&main_wait_queue);
+
+ return 0;
+}
+
+static struct sk_buff *stlc2690_alloc_skb(unsigned int size, gfp_t priority)
+{
+ struct sk_buff *skb;
+
+ dev_dbg(MAIN_DEV, "stlc2690_alloc_skb size %d bytes\n", size);
+
+ /* Allocate the SKB and reserve space for the header */
+ skb = alloc_skb(size + CG2900_SKB_RESERVE, priority);
+ if (skb)
+ skb_reserve(skb, CG2900_SKB_RESERVE);
+
+ return skb;
+}
+
+static int stlc2690_write(struct cg2900_user_data *user, struct sk_buff *skb)
+{
+ int err = 0;
+ u8 *h4_header;
+ struct cg2900_chip_dev *dev;
+ struct stlc2690_chip_info *info;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV,
+ "stlc2690_write: Calling with NULL pointer\n");
+ return -EINVAL;
+ }
+
+ if (!skb) {
+ dev_err(user->dev, "stlc2690_write with no sk_buffer\n");
+ return -EINVAL;
+ }
+
+ dev = cg2900_get_prv(user);
+ info = dev->c_data;
+
+ dev_dbg(user->dev, "stlc2690_write length %d bytes\n", skb->len);
+
+ if (!user->opened) {
+ dev_err(user->dev,
+ "Trying to transmit data on a closed channel\n");
+ return -EACCES;
+ }
+
+ /*
+ * Move the data pointer to the H:4 header position and
+ * store the H4 header.
+ */
+ h4_header = skb_push(skb, CG2900_SKB_RESERVE);
+ *h4_header = (u8)user->h4_channel;
+ cg2900_tx_to_chip(user, info->logger, skb);
+
+ return err;
+}
+
+static int stlc2690_no_write(struct cg2900_user_data *user,
+ struct sk_buff *skb)
+{
+ dev_err(user->dev, "Not allowed to send on this channel\n");
+ return -EPERM;
+}
+
+static bool stlc2690_get_local_revision(struct cg2900_user_data *user,
+ struct cg2900_rev_data *rev_data)
+{
+ struct cg2900_chip_dev *dev;
+
+ BUG_ON(!main_info);
+
+ if (!user) {
+ dev_err(MAIN_DEV, "stlc2690_get_local_revision: Calling with "
+ "NULL pointer\n");
+ return false;
+ }
+
+ if (!rev_data) {
+ dev_err(user->dev, "Calling with rev_data NULL\n");
+ return false;
+ }
+
+ dev = cg2900_get_prv(user);
+
+ rev_data->revision = dev->chip.hci_revision;
+ rev_data->sub_version = dev->chip.hci_sub_version;
+
+ return true;
+}
+
+static struct cg2900_user_data btcmd_data = {
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data btacl_data = {
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data btevt_data = {
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data hci_logger_data = {
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = stlc2690_no_write,
+ .open = stlc2690_hci_log_open,
+ .close = stlc2690_hci_log_close,
+};
+static struct cg2900_user_data core_data = {
+ .h4_channel = CHANNEL_CORE,
+ .write = stlc2690_no_write,
+};
+
+static struct mfd_cell stlc2690_devs[] = {
+ {
+ .name = "cg2900-btcmd",
+ .platform_data = &btcmd_data,
+ .pdata_size = sizeof(btcmd_data),
+ },
+ {
+ .name = "cg2900-btacl",
+ .platform_data = &btacl_data,
+ .pdata_size = sizeof(btacl_data),
+ },
+ {
+ .name = "cg2900-btevt",
+ .platform_data = &btevt_data,
+ .pdata_size = sizeof(btevt_data),
+ },
+ {
+ .name = "cg2900-hcilogger",
+ .platform_data = &hci_logger_data,
+ .pdata_size = sizeof(hci_logger_data),
+ },
+ {
+ .name = "cg2900-core",
+ .platform_data = &core_data,
+ .pdata_size = sizeof(core_data),
+ },
+};
+
+static struct cg2900_user_data char_btcmd_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_BT_CMD,
+ },
+ .h4_channel = CHANNEL_BT_CMD,
+};
+static struct cg2900_user_data char_btacl_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_BT_ACL,
+ },
+ .h4_channel = CHANNEL_BT_ACL,
+};
+static struct cg2900_user_data char_btevt_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_BT_EVT,
+ },
+ .h4_channel = CHANNEL_BT_EVT,
+};
+static struct cg2900_user_data char_hci_logger_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_HCI_LOGGER,
+ },
+ .h4_channel = CHANNEL_HCI_LOGGER,
+ .chip_independent = true,
+ .write = stlc2690_no_write,
+ .open = stlc2690_hci_log_open,
+ .close = stlc2690_hci_log_close,
+};
+static struct cg2900_user_data char_core_data = {
+ .channel_data = {
+ .char_dev_name = STLC2690_CORE,
+ },
+ .h4_channel = CHANNEL_CORE,
+ .write = stlc2690_no_write,
+};
+
+static struct mfd_cell stlc2690_char_devs[] = {
+ {
+ .name = "cg2900-chardev",
+ .id = 0,
+ .platform_data = &char_btcmd_data,
+ .pdata_size = sizeof(char_btcmd_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 1,
+ .platform_data = &char_btacl_data,
+ .pdata_size = sizeof(char_btacl_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 2,
+ .platform_data = &char_btevt_data,
+ .pdata_size = sizeof(char_btevt_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 7,
+ .platform_data = &char_hci_logger_data,
+ .pdata_size = sizeof(char_hci_logger_data),
+ },
+ {
+ .name = "cg2900-chardev",
+ .id = 8,
+ .platform_data = &char_core_data,
+ .pdata_size = sizeof(char_core_data),
+ },
+};
+
+/**
+ * set_plat_data() - Initializes data for an MFD cell.
+ * @cell: MFD cell.
+ * @dev: Current chip.
+ *
+ * Sets each callback to default function unless already set.
+ */
+static void set_plat_data(struct mfd_cell *cell, struct cg2900_chip_dev *dev)
+{
+ struct cg2900_user_data *user = cell->platform_data;
+
+ if (!user->open)
+ user->open = stlc2690_open;
+ if (!user->close)
+ user->close = stlc2690_close;
+ if (!user->reset)
+ user->reset = stlc2690_reset;
+ if (!user->alloc_skb)
+ user->alloc_skb = stlc2690_alloc_skb;
+ if (!user->write)
+ user->write = stlc2690_write;
+ if (!user->get_local_revision)
+ user->get_local_revision = stlc2690_get_local_revision;
+
+ cg2900_set_prv(user, dev);
+}
+
+/**
+ * check_chip_support() - Checks if connected chip is handled by this driver.
+ * @dev: Chip info structure.
+ *
+ * If supported return true and fill in @callbacks.
+ *
+ * Returns:
+ * true if chip is handled by this driver.
+ * false otherwise.
+ */
+static bool check_chip_support(struct cg2900_chip_dev *dev)
+{
+ struct cg2900_platform_data *pf_data;
+ struct stlc2690_chip_info *info;
+ int i;
+ int err;
+
+ dev_dbg(dev->dev, "check_chip_support\n");
+
+ /*
+ * Check if this is a STLC2690 revision.
+ * We do not care about the sub-version at the moment. Change this if
+ * necessary.
+ */
+ if (dev->chip.manufacturer != STLC2690_SUPP_MANUFACTURER ||
+ dev->chip.hci_revision < STLC2690_SUPP_REVISION_MIN ||
+ dev->chip.hci_revision > STLC2690_SUPP_REVISION_MAX) {
+ dev_dbg(dev->dev, "Chip not supported by STLC2690 driver\n"
+ "\tMan: 0x%02X\n"
+ "\tRev: 0x%04X\n"
+ "\tSub: 0x%04X\n",
+ dev->chip.manufacturer, dev->chip.hci_revision,
+ dev->chip.hci_sub_version);
+ return false;
+ }
+
+ /* Store needed data */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(dev->dev, "Couldn't allocate info struct\n");
+ return false;
+ }
+
+ /* Initialize all variables */
+ INIT_LIST_HEAD(&info->open_channels);
+ spin_lock_init(&info->rw_lock);
+ info->chip_dev = dev;
+
+ info->wq = create_singlethread_workqueue(WQ_NAME);
+ if (!info->wq) {
+ dev_err(dev->dev, "Could not create workqueue\n");
+ goto err_handling_free_info;
+ }
+
+ info->patch_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->patch_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffer for patch file\n");
+ goto err_handling_destroy_wq;
+ }
+
+ info->settings_file_name = kzalloc(NAME_MAX + 1, GFP_ATOMIC);
+ if (!info->settings_file_name) {
+ dev_err(dev->dev,
+ "Couldn't allocate name buffers settings file\n");
+ goto err_handling_free_patch_name;
+ }
+
+ dev->c_data = info;
+ /* Set the callbacks */
+ dev->c_cb.data_from_chip = data_from_chip;
+ dev->c_cb.chip_removed = chip_removed,
+ info->chip_dev = dev;
+
+ mutex_lock(&main_info->man_mutex);
+
+ pf_data = dev_get_platdata(dev->dev);
+ btcmd_data.channel_data.bt_bus = pf_data->bus;
+ btacl_data.channel_data.bt_bus = pf_data->bus;
+ btevt_data.channel_data.bt_bus = pf_data->bus;
+
+ for (i = 0; i < ARRAY_SIZE(stlc2690_devs); i++)
+ set_plat_data(&stlc2690_devs[i], dev);
+ for (i = 0; i < ARRAY_SIZE(stlc2690_char_devs); i++)
+ set_plat_data(&stlc2690_char_devs[i], dev);
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id, stlc2690_devs,
+ ARRAY_SIZE(stlc2690_devs), NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add stlc2690_devs (%d)\n", err);
+ goto err_handling_free_settings_name;
+ }
+
+ err = mfd_add_devices(dev->dev, main_info->cell_base_id,
+ stlc2690_char_devs,
+ ARRAY_SIZE(stlc2690_char_devs), NULL, 0);
+ if (err) {
+ dev_err(dev->dev, "Failed to add stlc2690_char_devs (%d)\n",
+ err);
+ goto err_handling_remove_devs;
+ }
+
+ main_info->cell_base_id += 30;
+ mutex_unlock(&main_info->man_mutex);
+
+ dev_info(dev->dev, "Chip supported by the STLC2690 chip driver\n");
+
+ /* Close the transport, which will power off the chip */
+ if (dev->t_cb.close)
+ dev->t_cb.close(dev);
+
+ dev_dbg(dev->dev, "New main_state: STLC2690_IDLE\n");
+ info->main_state = STLC2690_IDLE;
+
+ return true;
+
+err_handling_remove_devs:
+ mfd_remove_devices(dev->dev);
+err_handling_free_settings_name:
+ kfree(info->settings_file_name);
+err_handling_free_patch_name:
+ kfree(info->patch_file_name);
+err_handling_destroy_wq:
+ destroy_workqueue(info->wq);
+err_handling_free_info:
+ kfree(info);
+ return false;
+}
+
+static struct cg2900_id_callbacks chip_support_callbacks = {
+ .check_chip_support = check_chip_support,
+};
+
+/**
+ * stlc2690_chip_probe() - Initialize STLC2690 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * This function initializes the STLC2690 driver, then registers to
+ * the CG2900 Core.
+ *
+ * Returns:
+ * 0 if success.
+ * -ENOMEM for failed alloc or structure creation.
+ * Error codes generated by cg2900_register_chip_driver.
+ */
+static int __devinit stlc2690_chip_probe(struct platform_device *pdev)
+{
+ int err;
+
+ dev_dbg(&pdev->dev, "stlc2690_chip_probe\n");
+
+ main_info = kzalloc(sizeof(*main_info), GFP_ATOMIC);
+ if (!main_info) {
+ dev_err(&pdev->dev, "Couldn't allocate main_info\n");
+ return -ENOMEM;
+ }
+
+ main_info->dev = &pdev->dev;
+ mutex_init(&main_info->man_mutex);
+
+ err = cg2900_register_chip_driver(&chip_support_callbacks);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Couldn't register chip driver (%d)\n", err);
+ goto error_handling;
+ }
+
+ dev_info(&pdev->dev, "STLC2690 chip driver started\n");
+
+ return 0;
+
+error_handling:
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return err;
+}
+
+/**
+ * stlc2690_chip_remove() - Release STLC2690 chip handler resources.
+ * @pdev: Platform device.
+ *
+ * Returns:
+ * 0 if success (always success).
+ */
+static int __devexit stlc2690_chip_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "STLC2690 chip driver removed\n");
+
+ cg2900_deregister_chip_driver(&chip_support_callbacks);
+
+ if (!main_info)
+ return 0;
+
+ mutex_destroy(&main_info->man_mutex);
+ kfree(main_info);
+ main_info = NULL;
+ return 0;
+}
+
+static struct platform_driver stlc2690_chip_driver = {
+ .driver = {
+ .name = "stlc2690-chip",
+ .owner = THIS_MODULE,
+ },
+ .probe = stlc2690_chip_probe,
+ .remove = __devexit_p(stlc2690_chip_remove),
+};
+
+/**
+ * stlc2690_chip_init() - Initialize module.
+ *
+ * Registers platform driver.
+ */
+static int __init stlc2690_chip_init(void)
+{
+ pr_debug("stlc2690_chip_init");
+ return platform_driver_register(&stlc2690_chip_driver);
+}
+
+/**
+ * stlc2690_chip_exit() - Remove module.
+ *
+ * Unregisters platform driver.
+ */
+static void __exit stlc2690_chip_exit(void)
+{
+ pr_debug("stlc2690_chip_exit");
+ platform_driver_unregister(&stlc2690_chip_driver);
+}
+
+module_init(stlc2690_chip_init);
+module_exit(stlc2690_chip_exit);
+
+MODULE_AUTHOR("Par-Gunnar Hjalmdahl ST-Ericsson");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Linux STLC2690 Connectivity Device Driver");
diff --git a/drivers/staging/cg2900/mfd/stlc2690_chip.h b/drivers/staging/cg2900/mfd/stlc2690_chip.h
new file mode 100644
index 0000000..d14e773
--- /dev/null
+++ b/drivers/staging/cg2900/mfd/stlc2690_chip.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Authors:
+ * Par-Gunnar Hjalmdahl ([email protected]) for ST-Ericsson.
+ * Henrik Possung ([email protected]) for ST-Ericsson.
+ * Josef Kindberg ([email protected]) for ST-Ericsson.
+ * Dariusz Szymszak ([email protected]) for ST-Ericsson.
+ * Kjell Andersson ([email protected]) for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Linux Bluetooth HCI H:4 Driver for ST-Ericsson STLC2690 BT/FM controller.
+ */
+
+#ifndef _STLC2690_CHIP_H_
+#define _STLC2690_CHIP_H_
+
+/* Supported chips */
+#define STLC2690_SUPP_MANUFACTURER 0x30
+#define STLC2690_SUPP_REVISION_MIN 0x0500
+#define STLC2690_SUPP_REVISION_MAX 0x06FF
+
+#define BT_SIZE_OF_HDR (sizeof(__le16) + sizeof(__u8))
+#define BT_PARAM_LEN(__pkt_len) (__pkt_len - BT_SIZE_OF_HDR)
+
+/* BT VS Store In FS command */
+#define STLC2690_BT_OP_VS_STORE_IN_FS 0xFC22
+struct bt_vs_store_in_fs_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 user_id;
+ __u8 len;
+ __u8 data[];
+} __packed;
+
+/* BT VS Write File Block command */
+#define STLC2690_BT_OP_VS_WRITE_FILE_BLOCK 0xFC2E
+struct bt_vs_write_file_block_cmd {
+ __le16 opcode;
+ __u8 plen;
+ __u8 id;
+ __u8 data[];
+} __packed;
+
+/* User ID for storing BD address in chip using Store_In_FS command */
+#define STLC2690_VS_STORE_IN_FS_USR_ID_BD_ADDR 0xFE
+
+#endif /* _STLC2690_CHIP_H_ */
--
1.7.4.3


2011-05-10 20:08:54

by Greg KH

[permalink] [raw]
Subject: Re: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

On Tue, May 10, 2011 at 05:10:32PM +0200, Par-Gunnar Hjalmdahl wrote:
> This patch adds support for the ST-Ericsson CG2900
> Connectivity Combo controller (Bluetooth, FM, GPS).
>
> Signed-off-by: Par-Gunnar Hjalmdahl <[email protected]>
> Acked-by: Linus Walleij <[email protected]>

{sigh}

This breaks the build again, the error messages are below :(

I'm about to give up here, so the next time you send this patch in, I
want some kind of proof that the code will at least build properly.

How you provide this is up to you.

Oh, and if the next one breaks stuff again, you will owe me a lot of
beer, although I think you owe me already...

thanks,

greg k-h

CC [M] drivers/staging/cg2900/mfd/cg2900_chip.o
drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: (near initialization for ‘cg2900_devs[0].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2941:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2941:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2945:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2945:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2945:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2945:3: error: (near initialization for ‘cg2900_devs[1].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2946:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2946:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2950:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2950:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2950:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2950:3: error: (near initialization for ‘cg2900_devs[2].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2951:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2951:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2955:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2955:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2955:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2955:3: error: (near initialization for ‘cg2900_devs[3].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2956:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2956:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2960:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2960:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2960:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2960:3: error: (near initialization for ‘cg2900_devs[4].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2961:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2961:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2965:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2965:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2965:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2965:3: error: (near initialization for ‘cg2900_devs[5].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2966:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2966:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2970:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2970:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2970:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2970:3: error: (near initialization for ‘cg2900_devs[6].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2971:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2971:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2975:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2975:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2975:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2975:3: error: (near initialization for ‘cg2900_devs[7].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2976:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2976:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2980:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2980:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2980:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2980:3: error: (near initialization for ‘cg2900_devs[8].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2981:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2981:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2985:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2985:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2985:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2985:3: error: (near initialization for ‘cg2900_devs[9].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2986:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2986:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2990:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2990:3: warning: initialization makes integer from pointer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:2990:3: error: initializer element is not computable at load time
drivers/staging/cg2900/mfd/cg2900_chip.c:2990:3: error: (near initialization for ‘cg2900_devs[10].id’)
drivers/staging/cg2900/mfd/cg2900_chip.c:2991:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:2991:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3073:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3073:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3074:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3074:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3079:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3079:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3080:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3080:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3085:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3085:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3086:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3086:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3091:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3091:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3092:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3092:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3097:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3097:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3098:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3098:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3103:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3103:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3104:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3104:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3109:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3109:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3110:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3110:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3115:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3115:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3116:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3116:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3121:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3121:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3122:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3122:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3127:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3127:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3128:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3128:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c:3133:3: error: unknown field ‘platform_data’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3133:3: warning: initialization from incompatible pointer type
drivers/staging/cg2900/mfd/cg2900_chip.c:3134:3: error: unknown field ‘pdata_size’ specified in initializer
drivers/staging/cg2900/mfd/cg2900_chip.c:3134:3: warning: initialization makes pointer from integer without a cast
drivers/staging/cg2900/mfd/cg2900_chip.c: In function ‘set_plat_data’:
drivers/staging/cg2900/mfd/cg2900_chip.c:3147:41: error: ‘struct mfd_cell’ has no member named ‘platform_data’
drivers/staging/cg2900/mfd/cg2900_chip.c:3147:37: warning: initialization from incompatible pointer type
make[4]: *** [drivers/staging/cg2900/mfd/cg2900_chip.o] Error 1

2011-05-11 00:07:35

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

2011/5/10 Greg KH <[email protected]>:

> On Tue, May 10, 2011 at 05:10:32PM +0200, Par-Gunnar Hjalmdahl wrote:
>> This patch adds support for the ST-Ericsson CG2900
>> Connectivity Combo controller (Bluetooth, FM, GPS).
>>
>> Signed-off-by: Par-Gunnar Hjalmdahl <[email protected]>
>> Acked-by: Linus Walleij <[email protected]>
>
> {sigh}
>
> This breaks the build again, the error messages are below :(

I suspect the problem is that Per-Gunnar does not know how to reproduce
your build errors. Are you building for some x86 combination, allyes, etc
for example? This is likely currently only tested and applicable for ux500
so a simple "depends on ARCH_U8500" under config CG2900 may solve
stuff.

Yours,
Linus Walleij

2011-05-11 01:58:49

by Greg KH

[permalink] [raw]
Subject: Re: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

On Wed, May 11, 2011 at 02:07:33AM +0200, Linus Walleij wrote:
> 2011/5/10 Greg KH <[email protected]>:
>
> > On Tue, May 10, 2011 at 05:10:32PM +0200, Par-Gunnar Hjalmdahl wrote:
> >> This patch adds support for the ST-Ericsson CG2900
> >> Connectivity Combo controller (Bluetooth, FM, GPS).
> >>
> >> Signed-off-by: Par-Gunnar Hjalmdahl <[email protected]>
> >> Acked-by: Linus Walleij <[email protected]>
> >
> > {sigh}
> >
> > This breaks the build again, the error messages are below :(
>
> I suspect the problem is that Per-Gunnar does not know how to reproduce
> your build errors. Are you building for some x86 combination, allyes, etc
> for example? This is likely currently only tested and applicable for ux500
> so a simple "depends on ARCH_U8500" under config CG2900 may solve
> stuff.

All I did was merely enable the driver to be built on my desktop,
something that any developer should have done, right?

And why can't the code be built for any architecture, what is forcing it
for only one platform? That's not the way drivers should be written,
right?

So please fix the real problem, don't just confine it to one
architecture, what is to keep this from showing up on another chip soon?

thanks,

greg k-h

2011-05-11 15:59:59

by Par-Gunnar HJALMDAHL

[permalink] [raw]
Subject: RE: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

> -----Original Message-----
> From: Greg KH [mailto:[email protected]]
> Sent: den 10 maj 2011 22:08
>
> {sigh}
>
> This breaks the build again, the error messages are below :(
>
> I'm about to give up here, so the next time you send this patch in, I
> want some kind of proof that the code will at least build properly.
>
> How you provide this is up to you.
>
> Oh, and if the next one breaks stuff again, you will owe me a lot of
> beer, although I think you owe me already...
>
> thanks,
>
> greg k-h
>
> CC [M] drivers/staging/cg2900/mfd/cg2900_chip.o
> drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: unknown field
> ‘platform_data’ specified in initializer
> drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: warning:
> initialization makes integer from pointer without a cast
> drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: initializer
> element is not computable at load time
> drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: (near
> initialization for ‘cg2900_devs[0].id’)

Hi Greg,

What linux-next tag did you base the patch on?
I used next-20110510 and in that tag the file include/Linux/mfd/core.h
The struct mfd_cell has a parameter called platform_data, while in your
build it seems it doesn't.
This was changed very recently in the core.h file (on April 6).
So for core.h the last commit ID I have in the tag I built upon is
558aa9c0d620b91a896d5e39ce8a570bed65589b.

Thanks,
P-G

????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2011-05-11 15:58:50

by Par-Gunnar HJALMDAHL

[permalink] [raw]
Subject: RE: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

> -----Original Message-----
> From: Greg KH [mailto:[email protected]]
> Sent: den 10 maj 2011 22:08
> {sigh}
>
> Oh, and if the next one breaks stuff again, you will owe me a lot of
> beer, although I think you owe me already...
>

I promise you a beer if we meet. :-)

/P-G
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2011-05-11 16:19:13

by Greg KH

[permalink] [raw]
Subject: Re: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

On Wed, May 11, 2011 at 10:34:47AM +0200, Par-Gunnar HJALMDAHL wrote:
> > -----Original Message-----
> > From: Greg KH [mailto:[email protected]]
> > Sent: den 10 maj 2011 22:08
> >
> > {sigh}
> >
> > This breaks the build again, the error messages are below :(
> >
> > I'm about to give up here, so the next time you send this patch in, I
> > want some kind of proof that the code will at least build properly.
> >
> > How you provide this is up to you.
> >
> > Oh, and if the next one breaks stuff again, you will owe me a lot of
> > beer, although I think you owe me already...
> >
> > thanks,
> >
> > greg k-h
> >
> > CC [M] drivers/staging/cg2900/mfd/cg2900_chip.o
> > drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: unknown field
> > ‘platform_data’ specified in initializer
> > drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: warning:
> > initialization makes integer from pointer without a cast
> > drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: initializer
> > element is not computable at load time
> > drivers/staging/cg2900/mfd/cg2900_chip.c:2940:3: error: (near
> > initialization for ‘cg2900_devs[0].id’)
>
> Hi Greg,
>
> What linux-next tag did you base the patch on?

My staging git tree. I can't apply to linux-next, only my tree,
linux-next then picks it up.

> I used next-20110510 and in that tag the file include/Linux/mfd/core.h
> The struct mfd_cell has a parameter called platform_data, while in your
> build it seems it doesn't.
> This was changed very recently in the core.h file (on April 6).
> So for core.h the last commit ID I have in the tag I built upon is
> 558aa9c0d620b91a896d5e39ce8a570bed65589b.

So do I need that patch on the staging-next tree also?

Or is it an issue of building this on x86-64...

thanks,

greg k-h

2011-05-12 11:56:03

by Par-Gunnar HJALMDAHL

[permalink] [raw]
Subject: RE: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

> -----Original Message-----
> From: Greg KH [mailto:[email protected]]
> Sent: den 11 maj 2011 15:49
>
> > I used next-20110510 and in that tag the file
> include/Linux/mfd/core.h
> > The struct mfd_cell has a parameter called platform_data, while in
> your
> > build it seems it doesn't.
> > This was changed very recently in the core.h file (on April 6).
> > So for core.h the last commit ID I have in the tag I built upon is
> > 558aa9c0d620b91a896d5e39ce8a570bed65589b.
>
> So do I need that patch on the staging-next tree also?
>
> Or is it an issue of building this on x86-64...
>
> thanks,
>
> greg k-h

Hi Greg,

I downloaded you staging tree and compared the logs for the core.h file.
Compared to linux-next tag next-20110510 it is missing 2 commits:
4dbee6b76fffd5740e87e286f4f4c1c15901bcae
558aa9c0d620b91a896d5e39ce8a570bed65589b
where the first one is the "oldest" one in the log and is the most
important one for my patch.
Another option would be for me to fix the patch for your tree, but
then I would probably have to fix it back in a few days when you update
your staging tree to Linux-next. How often is your tree updated?

The easiest is probably to wait a few days until you have the next-20110510
tag in your tree and then apply the patch.

Thanks,
P-G

????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay?ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?

2011-05-12 16:55:05

by Greg KH

[permalink] [raw]
Subject: Re: [PATCH v6] staging: Add ST-Ericsson CG2900 driver

On Thu, May 12, 2011 at 01:54:46PM +0200, Par-Gunnar HJALMDAHL wrote:
> Hi Greg,
>
> I downloaded you staging tree and compared the logs for the core.h file.
> Compared to linux-next tag next-20110510 it is missing 2 commits:
> 4dbee6b76fffd5740e87e286f4f4c1c15901bcae
> 558aa9c0d620b91a896d5e39ce8a570bed65589b
> where the first one is the "oldest" one in the log and is the most
> important one for my patch.

What trees are these patches coming from?

> Another option would be for me to fix the patch for your tree, but
> then I would probably have to fix it back in a few days when you update
> your staging tree to Linux-next. How often is your tree updated?

linux-next pulls from my tree, I don't pull from linux-next.

As I don't see those patches in Linus's tree, I can't merge my tree
forward to include them yet. I could take those patches also through my
tree if you want me to, or you could send this patch through the mfd
tree so that things build properly there too.

> The easiest is probably to wait a few days until you have the next-20110510
> tag in your tree and then apply the patch.

That will never happen, see above for how linux-next works.

thanks,

greg k-h