2018-12-03 04:01:05

by Yueyi Li

[permalink] [raw]
Subject: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.

Found warning:

WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
The function valid_phys_addr_range() references
the function __init memblock_is_reserved().
This is often because valid_phys_addr_range lacks a __init
annotation or the annotation of memblock_is_reserved is wrong.

Use __init_memblock instead of __init.

Signed-off-by: liyueyi <[email protected]>
---

Changes v2: correct typo in 'warning'.

mm/memblock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/memblock.c b/mm/memblock.c
index 9a2d5ae..81ae63c 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -1727,7 +1727,7 @@ static int __init_memblock memblock_search(struct memblock_type *type, phys_addr
return -1;
}

-bool __init memblock_is_reserved(phys_addr_t addr)
+bool __init_memblock memblock_is_reserved(phys_addr_t addr)
{
return memblock_search(&memblock.reserved, addr) != -1;
}
--
2.7.4



2018-12-03 09:11:39

by Michal Hocko

[permalink] [raw]
Subject: Re: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.

On Mon 03-12-18 04:00:08, Yueyi Li wrote:
> Found warning:
>
> WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
> WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
> The function valid_phys_addr_range() references
> the function __init memblock_is_reserved().
> This is often because valid_phys_addr_range lacks a __init
> annotation or the annotation of memblock_is_reserved is wrong.
>
> Use __init_memblock instead of __init.

Yes, it really doesn't make much sense to stand this out of all other
helpers.

> Signed-off-by: liyueyi <[email protected]>

Acked-by: Michal Hocko <[email protected]>

> ---
>
> Changes v2: correct typo in 'warning'.
>
> mm/memblock.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/mm/memblock.c b/mm/memblock.c
> index 9a2d5ae..81ae63c 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -1727,7 +1727,7 @@ static int __init_memblock memblock_search(struct memblock_type *type, phys_addr
> return -1;
> }
>
> -bool __init memblock_is_reserved(phys_addr_t addr)
> +bool __init_memblock memblock_is_reserved(phys_addr_t addr)
> {
> return memblock_search(&memblock.reserved, addr) != -1;
> }
> --
> 2.7.4
>

--
Michal Hocko
SUSE Labs

2018-12-03 11:12:02

by David Hildenbrand

[permalink] [raw]
Subject: Re: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.

On 03.12.18 05:00, Yueyi Li wrote:
> Found warning:
>
> WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
> WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
> The function valid_phys_addr_range() references
> the function __init memblock_is_reserved().
> This is often because valid_phys_addr_range lacks a __init
> annotation or the annotation of memblock_is_reserved is wrong.
>
> Use __init_memblock instead of __init.
>
> Signed-off-by: liyueyi <[email protected]>
> ---
>
> Changes v2: correct typo in 'warning'.
>
> mm/memblock.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/mm/memblock.c b/mm/memblock.c
> index 9a2d5ae..81ae63c 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -1727,7 +1727,7 @@ static int __init_memblock memblock_search(struct memblock_type *type, phys_addr
> return -1;
> }
>
> -bool __init memblock_is_reserved(phys_addr_t addr)
> +bool __init_memblock memblock_is_reserved(phys_addr_t addr)
> {
> return memblock_search(&memblock.reserved, addr) != -1;
> }
>

Reviewed-by: David Hildenbrand <[email protected]>

--

Thanks,

David / dhildenb

2018-12-03 17:48:05

by Mike Rapoport

[permalink] [raw]
Subject: Re: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.

On Mon, Dec 03, 2018 at 04:00:08AM +0000, Yueyi Li wrote:
> Found warning:
>
> WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
> WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
> The function valid_phys_addr_range() references
> the function __init memblock_is_reserved().
> This is often because valid_phys_addr_range lacks a __init
> annotation or the annotation of memblock_is_reserved is wrong.
>
> Use __init_memblock instead of __init.
>
> Signed-off-by: liyueyi <[email protected]>

Acked-by: Mike Rapoport <[email protected]>

> ---
>
> Changes v2: correct typo in 'warning'.
>
> mm/memblock.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/mm/memblock.c b/mm/memblock.c
> index 9a2d5ae..81ae63c 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -1727,7 +1727,7 @@ static int __init_memblock memblock_search(struct memblock_type *type, phys_addr
> return -1;
> }
>
> -bool __init memblock_is_reserved(phys_addr_t addr)
> +bool __init_memblock memblock_is_reserved(phys_addr_t addr)
> {
> return memblock_search(&memblock.reserved, addr) != -1;
> }
> --
> 2.7.4
>

--
Sincerely yours,
Mike.


2018-12-04 03:05:07

by Wei Yang

[permalink] [raw]
Subject: Re: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.

On Mon, Dec 03, 2018 at 04:00:08AM +0000, Yueyi Li wrote:
>Found warning:
>
>WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
>WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
>The function valid_phys_addr_range() references
>the function __init memblock_is_reserved().
>This is often because valid_phys_addr_range lacks a __init
>annotation or the annotation of memblock_is_reserved is wrong.
>
>Use __init_memblock instead of __init.

Not familiar with this error, the change looks good to me while have
some questions.

1. I don't see valid_phys_addr_range() reference memblock_is_reserved().
This is in which file or arch?
2. In case a function reference memblock_is_reserved(), should it has
the annotation of __init_memblock too? Or just __init is ok? If my
understanding is correct, annotation __init is ok. Well, I don't see
valid_phys_addr_range() has an annotation.
3. The only valid_phys_addr_range() reference some memblock function is
the one in arch/arm64/mm/mmap.c. Do we suppose to add an annotation to
this?

>
>Signed-off-by: liyueyi <[email protected]>
>---
>
> Changes v2: correct typo in 'warning'.
>
> mm/memblock.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/mm/memblock.c b/mm/memblock.c
>index 9a2d5ae..81ae63c 100644
>--- a/mm/memblock.c
>+++ b/mm/memblock.c
>@@ -1727,7 +1727,7 @@ static int __init_memblock memblock_search(struct memblock_type *type, phys_addr
> return -1;
> }
>
>-bool __init memblock_is_reserved(phys_addr_t addr)
>+bool __init_memblock memblock_is_reserved(phys_addr_t addr)
> {
> return memblock_search(&memblock.reserved, addr) != -1;
> }
>--
>2.7.4

--
Wei Yang
Help you, Help me

2018-12-05 05:40:02

by Yueyi Li

[permalink] [raw]
Subject: Re: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.


On 2018/12/4 11:04, Wei Yang wrote:
> On Mon, Dec 03, 2018 at 04:00:08AM +0000, Yueyi Li wrote:
>> Found warning:
>>
>> WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
>> WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
>> The function valid_phys_addr_range() references
>> the function __init memblock_is_reserved().
>> This is often because valid_phys_addr_range lacks a __init
>> annotation or the annotation of memblock_is_reserved is wrong.
>>
>> Use __init_memblock instead of __init.
> Not familiar with this error, the change looks good to me while have
> some questions.
>
> 1. I don't see valid_phys_addr_range() reference memblock_is_reserved().
> This is in which file or arch?

Yes, I modified valid_phys_addr_range() for some other debugging.

> 2. In case a function reference memblock_is_reserved(), should it has
> the annotation of __init_memblock too? Or just __init is ok? If my
> understanding is correct, annotation __init is ok. Well, I don't see
> valid_phys_addr_range() has an annotation.
> 3. The only valid_phys_addr_range() reference some memblock function is
> the one in arch/arm64/mm/mmap.c. Do we suppose to add an annotation to
> this?

Actually, __init_memblock is null in arch arm64, this warning is due to
CONFIG_DEBUG_SECTION_MISMATCH enabled, the help text in lib/Kconfig.debug.



Thanks,
Yueyi

2018-12-05 07:00:21

by Wei Yang

[permalink] [raw]
Subject: Re: [PATCH v2] memblock: Anonotate memblock_is_reserved() with __init_memblock.

On Wed, Dec 05, 2018 at 05:37:37AM +0000, Yueyi Li wrote:
>
>On 2018/12/4 11:04, Wei Yang wrote:
>> On Mon, Dec 03, 2018 at 04:00:08AM +0000, Yueyi Li wrote:
>>> Found warning:
>>>
>>> WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
>>> WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
>>> The function valid_phys_addr_range() references
>>> the function __init memblock_is_reserved().
>>> This is often because valid_phys_addr_range lacks a __init
>>> annotation or the annotation of memblock_is_reserved is wrong.
>>>
>>> Use __init_memblock instead of __init.
>> Not familiar with this error, the change looks good to me while have
>> some questions.
>>
>> 1. I don't see valid_phys_addr_range() reference memblock_is_reserved().
>> This is in which file or arch?
>
>Yes, I modified valid_phys_addr_range() for some other debugging.
>
>> 2. In case a function reference memblock_is_reserved(), should it has
>> the annotation of __init_memblock too? Or just __init is ok? If my
>> understanding is correct, annotation __init is ok. Well, I don't see
>> valid_phys_addr_range() has an annotation.
>> 3. The only valid_phys_addr_range() reference some memblock function is
>> the one in arch/arm64/mm/mmap.c. Do we suppose to add an annotation to
>> this?
>
>Actually, __init_memblock is null in arch arm64, this warning is due to
>CONFIG_DEBUG_SECTION_MISMATCH enabled, the help text in lib/Kconfig.debug.
>

Ok, thanks.

>
>
>Thanks,
>Yueyi

--
Wei Yang
Help you, Help me