2023-04-10 03:17:06

by Jun Chen

[permalink] [raw]
Subject: [PATCH] scsi: lpfc: silence an incorrect device output

In lpfc_sli4_pci_mem_unset, case LPFC_SLI_INTF_IF_TYPE_1 does not have a
break statement, resulting in an incorrect device output.

Fix this by adding a break statement before the default option.

Signed-off-by: Jun Chen <[email protected]>
Reviewed-by: Dongliang Mu <[email protected]>
---
drivers/scsi/lpfc/lpfc_init.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d062220d3232..da3a45441639 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12105,6 +12105,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
iounmap(phba->sli4_hba.dpp_regs_memmap_p);
break;
case LPFC_SLI_INTF_IF_TYPE_1:
+ break;
default:
dev_printk(KERN_ERR, &phba->pcidev->dev,
"FATAL - unsupported SLI4 interface type - %d\n",
--
2.25.1


2023-04-11 21:36:40

by Justin Tee

[permalink] [raw]
Subject: Re: [PATCH] scsi: lpfc: silence an incorrect device output

Hi Jun,

Broadcom no longer supports LPFC_SLI_INTF_IF_TYPE_1 adapters, but the
patch looks fine.

Reviewed-by: Justin Tee <[email protected]>

Thanks,
Justin

On Sun, Apr 9, 2023 at 8:14 PM Jun Chen <[email protected]> wrote:
>
> In lpfc_sli4_pci_mem_unset, case LPFC_SLI_INTF_IF_TYPE_1 does not have a
> break statement, resulting in an incorrect device output.
>
> Fix this by adding a break statement before the default option.
>
> Signed-off-by: Jun Chen <[email protected]>
> Reviewed-by: Dongliang Mu <[email protected]>
> ---
> drivers/scsi/lpfc/lpfc_init.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index d062220d3232..da3a45441639 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -12105,6 +12105,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
> iounmap(phba->sli4_hba.dpp_regs_memmap_p);
> break;
> case LPFC_SLI_INTF_IF_TYPE_1:
> + break;
> default:
> dev_printk(KERN_ERR, &phba->pcidev->dev,
> "FATAL - unsupported SLI4 interface type - %d\n",
> --
> 2.25.1
>

2023-04-12 01:32:44

by Martin K. Petersen

[permalink] [raw]
Subject: Re: [PATCH] scsi: lpfc: silence an incorrect device output


Jun,

> In lpfc_sli4_pci_mem_unset, case LPFC_SLI_INTF_IF_TYPE_1 does not have
> a break statement, resulting in an incorrect device output.

Applied to 6.4/scsi-staging, thanks!

--
Martin K. Petersen Oracle Linux Engineering