On Sun, 20 Feb 2022 11:53:12 +0800, Tyrone Ting wrote:
> From: Tyrone Ting <[email protected]>
>
> Add compatible and nuvoton,sys-mgr description for NPCM i2c module.
>
> Signed-off-by: Tyrone Ting <[email protected]>
> Signed-off-by: Tali Perry <[email protected]>
> ---
> .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 17 ++++++++++++-----
> 1 file changed, 12 insertions(+), 5 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml:19:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
./Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml:20:7: [warning] wrong indentation: expected 7 but found 6 (indentation)
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1595125
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
Hi Rob:
Thank you for your comments and they will be addressed.
Rob Herring <[email protected]> 於 2022年2月21日 週一 上午10:36寫道：
>
> On Sun, 20 Feb 2022 11:53:12 +0800, Tyrone Ting wrote:
> > From: Tyrone Ting <[email protected]>
> >
> > Add compatible and nuvoton,sys-mgr description for NPCM i2c module.
> >
> > Signed-off-by: Tyrone Ting <[email protected]>
> > Signed-off-by: Tali Perry <[email protected]>
> > ---
> > .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 17 ++++++++++++-----
> > 1 file changed, 12 insertions(+), 5 deletions(-)
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml:19:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
> ./Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml:20:7: [warning] wrong indentation: expected 7 but found 6 (indentation)
>
> dtschema/dtc warnings/errors:
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/patch/1595125
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
>
Best regards,
Tyrone