From: Fenglin Wu <[email protected]>
GPIO is expected to be disabled iff PIN_CONFIG_BIAS_HIGH_IMPEDANCE is
configured. Update is_enabled flag in config_set() so that it can
reflect GPIO status correctly. Also modify EN_CTL register based on
is_enabled flag in config_set() to configure the GPIO properly.
Signed-off-by: Fenglin Wu <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index c2c0bab..a0edaa8 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -453,6 +453,7 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
pad = pctldev->desc->pins[pin].drv_data;
+ pad->is_enabled = true;
for (i = 0; i < nconfs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
@@ -600,6 +601,10 @@ static int pmic_gpio_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
return ret;
}
+ val = pad->is_enabled << PMIC_GPIO_REG_MASTER_EN_SHIFT;
+
+ ret = pmic_gpio_write(state, pad, PMIC_GPIO_REG_EN_CTL, val);
+
return ret;
}
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
On Tue, Sep 12, 2017 at 2:32 AM, <[email protected]> wrote:
> From: Fenglin Wu <[email protected]>
>
> GPIO is expected to be disabled iff PIN_CONFIG_BIAS_HIGH_IMPEDANCE is
> configured. Update is_enabled flag in config_set() so that it can
> reflect GPIO status correctly. Also modify EN_CTL register based on
> is_enabled flag in config_set() to configure the GPIO properly.
>
> Signed-off-by: Fenglin Wu <[email protected]>
Pending on Björn's review here.
Yours,
Linus Walleij