This fixes openvswitch's handling of nat packets in the related state.
In nf_ct_nat_execute(), which is called from nf_ct_nat(), ICMP/ICMPv6
packets in the IP_CT_RELATED or IP_CT_RELATED_REPLY state, which have
not been dropped, will follow the goto, however the placement of the
goto label means that updating the action bit field will be bypassed.
This causes ovs_nat_update_key() to not be called from ovs_ct_nat()
which means the openvswitch match key for the ICMP/ICMPv6 packet is not
updated and the pre-nat value will be retained for the key, which will
result in the wrong openflow rule being matched for that packet.
Move the goto label above where the action bit field is being set so
that it is updated in all cases where the packet is accepted.
Fixes: ebddb1404900 ("net: move the nat function to nf_nat_ovs for ovs and tc")
Signed-off-by: Brad Cowie <[email protected]>
---
net/netfilter/nf_nat_ovs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_nat_ovs.c b/net/netfilter/nf_nat_ovs.c
index 551abd2da614..0f9a559f6207 100644
--- a/net/netfilter/nf_nat_ovs.c
+++ b/net/netfilter/nf_nat_ovs.c
@@ -75,9 +75,10 @@ static int nf_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
}
err = nf_nat_packet(ct, ctinfo, hooknum, skb);
+out:
if (err == NF_ACCEPT)
*action |= BIT(maniptype);
-out:
+
return err;
}
--
2.34.1
+ Xin Long <[email protected]>
Aaron Conole <[email protected]>
[email protected]
On Fri, Dec 22, 2023 at 11:43:11AM +1300, Brad Cowie wrote:
> This fixes openvswitch's handling of nat packets in the related state.
>
> In nf_ct_nat_execute(), which is called from nf_ct_nat(), ICMP/ICMPv6
> packets in the IP_CT_RELATED or IP_CT_RELATED_REPLY state, which have
> not been dropped, will follow the goto, however the placement of the
> goto label means that updating the action bit field will be bypassed.
>
> This causes ovs_nat_update_key() to not be called from ovs_ct_nat()
> which means the openvswitch match key for the ICMP/ICMPv6 packet is not
> updated and the pre-nat value will be retained for the key, which will
> result in the wrong openflow rule being matched for that packet.
>
> Move the goto label above where the action bit field is being set so
> that it is updated in all cases where the packet is accepted.
>
> Fixes: ebddb1404900 ("net: move the nat function to nf_nat_ovs for ovs and tc")
> Signed-off-by: Brad Cowie <[email protected]>
Thanks Brad,
I agree with your analysis and that the problem appears to
have been introduced by the cited commit.
I am curious to know what use case triggers this /
why it when unnoticed for a year.
But in any case, this fix looks good to me.
Reviewed-by: Simon Horman <[email protected]>
> ---
> net/netfilter/nf_nat_ovs.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/net/netfilter/nf_nat_ovs.c b/net/netfilter/nf_nat_ovs.c
> index 551abd2da614..0f9a559f6207 100644
> --- a/net/netfilter/nf_nat_ovs.c
> +++ b/net/netfilter/nf_nat_ovs.c
> @@ -75,9 +75,10 @@ static int nf_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
> }
>
> err = nf_nat_packet(ct, ctinfo, hooknum, skb);
> +out:
> if (err == NF_ACCEPT)
> *action |= BIT(maniptype);
> -out:
> +
> return err;
> }
>
> --
> 2.34.1
>
> _______________________________________________
> dev mailing list
> [email protected]
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>
On Sun, 24 Dec 2023 at 10:13, Simon Horman <[email protected]> wrote:
> Thanks Brad,
>
> I agree with your analysis and that the problem appears to
> have been introduced by the cited commit.
Thanks for the review Simon.
> I am curious to know what use case triggers this /
> why it when unnoticed for a year.
We encountered this issue while upgrading some routers from
linux 5.15 to 6.2. The dataplane on these routers is provided
by an openvswitch bridge which is controlled via openflow by
faucet. These routers are also performing SNAT on all traffic
to/from the wan interface via openvswitch conntrack openflow
rules.
We noticed that after upgrading the linux kernel, traceroute/mtr
no longer worked when run from clients behind the router.
We eventually discovered the reason for this is that the
ICMP time exceeded messages elicited by traceroute were
matching openflow rules with the incorrect destination ip,
despite there being an openflow rule to undo the nat.
Other packets in the established or new state matched the
expected openflow rules.
A git bisect between 5.15 and 6.2 showed that this change in
behaviour was introduced by commit ebddb1404900. After the
above patch is applied our routers perform nat correctly
again for traceroute/mtr.
On Sat, Dec 23, 2023 at 9:48 PM Brad Cowie <[email protected]> wrote:
>
> On Sun, 24 Dec 2023 at 10:13, Simon Horman <[email protected]> wrote:
> > Thanks Brad,
> >
> > I agree with your analysis and that the problem appears to
> > have been introduced by the cited commit.
>
> Thanks for the review Simon.
>
> > I am curious to know what use case triggers this /
> > why it when unnoticed for a year.
>
> We encountered this issue while upgrading some routers from
> linux 5.15 to 6.2. The dataplane on these routers is provided
> by an openvswitch bridge which is controlled via openflow by
> faucet. These routers are also performing SNAT on all traffic
> to/from the wan interface via openvswitch conntrack openflow
> rules.
>
> We noticed that after upgrading the linux kernel, traceroute/mtr
> no longer worked when run from clients behind the router.
> We eventually discovered the reason for this is that the
> ICMP time exceeded messages elicited by traceroute were
> matching openflow rules with the incorrect destination ip,
> despite there being an openflow rule to undo the nat.
> Other packets in the established or new state matched the
> expected openflow rules.
>
> A git bisect between 5.15 and 6.2 showed that this change in
> behaviour was introduced by commit ebddb1404900. After the
> above patch is applied our routers perform nat correctly
> again for traceroute/mtr.
Acked-by: Xin Long <[email protected]>
Simon Horman <[email protected]> writes:
> + Xin Long <[email protected]>
> Aaron Conole <[email protected]>
> [email protected]
>
> On Fri, Dec 22, 2023 at 11:43:11AM +1300, Brad Cowie wrote:
>> This fixes openvswitch's handling of nat packets in the related state.
>>
>> In nf_ct_nat_execute(), which is called from nf_ct_nat(), ICMP/ICMPv6
>> packets in the IP_CT_RELATED or IP_CT_RELATED_REPLY state, which have
>> not been dropped, will follow the goto, however the placement of the
>> goto label means that updating the action bit field will be bypassed.
>>
>> This causes ovs_nat_update_key() to not be called from ovs_ct_nat()
>> which means the openvswitch match key for the ICMP/ICMPv6 packet is not
>> updated and the pre-nat value will be retained for the key, which will
>> result in the wrong openflow rule being matched for that packet.
>>
>> Move the goto label above where the action bit field is being set so
>> that it is updated in all cases where the packet is accepted.
>>
>> Fixes: ebddb1404900 ("net: move the nat function to nf_nat_ovs for ovs and tc")
>> Signed-off-by: Brad Cowie <[email protected]>
>
> Thanks Brad,
>
> I agree with your analysis and that the problem appears to
> have been introduced by the cited commit.
>
> I am curious to know what use case triggers this /
> why it when unnoticed for a year.
>
> But in any case, this fix looks good to me.
>
> Reviewed-by: Simon Horman <[email protected]>
>
>> ---
LGTM. I guess we should try to codify the specific flows that were used
to flag this into the ovs selftest - we clearly have a missing case
after NAT lookup.
I'll add it to my (ever growing) list.
Meanwhile,
Acked-by: Aaron Conole <[email protected]>
>> net/netfilter/nf_nat_ovs.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/net/netfilter/nf_nat_ovs.c b/net/netfilter/nf_nat_ovs.c
>> index 551abd2da614..0f9a559f6207 100644
>> --- a/net/netfilter/nf_nat_ovs.c
>> +++ b/net/netfilter/nf_nat_ovs.c
>> @@ -75,9 +75,10 @@ static int nf_ct_nat_execute(struct sk_buff *skb, struct nf_conn *ct,
>> }
>>
>> err = nf_nat_packet(ct, ctinfo, hooknum, skb);
>> +out:
>> if (err == NF_ACCEPT)
>> *action |= BIT(maniptype);
>> -out:
>> +
>> return err;
>> }
>>
>> --
>> 2.34.1
>>
>> _______________________________________________
>> dev mailing list
>> [email protected]
>> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>>
Applied to nf.git, thanks everyone for reviewing.
On Wed, 3 Jan 2024 at 04:10, Aaron Conole <[email protected]> wrote:
> LGTM. I guess we should try to codify the specific flows that were used
> to flag this into the ovs selftest - we clearly have a missing case
> after NAT lookup.
Thanks for the review Aaron, and the sensible suggestion to add a
test to ovs to avoid this problem occuring again in future.
I've simplified our NAT ruleset and turned it into an ovs system test,
which I've submitted as a patch [1] to ovs-dev. The test reproduces
the issue introduced by ebddb1404900 and passes when e6345d2824a3
is applied.
[1]: https://mail.openvswitch.org/pipermail/ovs-dev/2024-January/410476.html