From: Constantine Shulyupin <[email protected]>
Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
and set MUSB_OTG configuration by default
because this configuration options are removed from Kconfig.
Signed-off-by: Constantine Shulyupin <[email protected]>
---
arch/arm/mach-davinci/usb.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index f77b953..34509ff 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data usb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
/* OTG requires a Mini-AB connector */
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#elif defined(CONFIG_USB_MUSB_HOST)
- .mode = MUSB_HOST,
-#endif
.clock = "usb",
.config = &musb_config,
};
--
1.7.9.5
Hi,
On Mon, Oct 08, 2012 at 18:47:07, Constantine Shulyupin wrote:
> From: Constantine Shulyupin <[email protected]>
>
> Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
> CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
> and set MUSB_OTG configuration by default
> because this configuration options are removed from Kconfig.
>
> Signed-off-by: Constantine Shulyupin <[email protected]>
>
> ---
> arch/arm/mach-davinci/usb.c | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
> index f77b953..34509ff 100644
> --- a/arch/arm/mach-davinci/usb.c
> +++ b/arch/arm/mach-davinci/usb.c
> @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
> };
>
> static struct musb_hdrc_platform_data usb_data = {
> -#if defined(CONFIG_USB_MUSB_OTG)
> /* OTG requires a Mini-AB connector */
> .mode = MUSB_OTG,
> -#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
> - .mode = MUSB_PERIPHERAL,
> -#elif defined(CONFIG_USB_MUSB_HOST)
> - .mode = MUSB_HOST,
> -#endif
> .clock = "usb",
> .config = &musb_config,
> };
Tested it on DM6446-EVM for host mode with MSC thumb drive and gadget
mode with g-ether. It works.
Acked-by: Manjunathappa, Prakash <[email protected]>
Thanks,
Prakash
> --
> 1.7.9.5
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
Hello Manjunathappa
On 11.10.2012 07:42, Manjunathappa, Prakash wrote:
> Hi,
> On Mon, Oct 08, 2012 at 18:47:07, Constantine Shulyupin wrote:
>> From: Constantine Shulyupin<[email protected]>
>>
>> Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
>> CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
>> and set MUSB_OTG configuration by default
>> because this configuration options are removed from Kconfig.
>>
>> Signed-off-by: Constantine Shulyupin<[email protected]>
>>
>> ---
>> arch/arm/mach-davinci/usb.c | 6 ------
>> 1 file changed, 6 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
>> index f77b953..34509ff 100644
>> --- a/arch/arm/mach-davinci/usb.c
>> +++ b/arch/arm/mach-davinci/usb.c
>> @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
>> };
>>
>> static struct musb_hdrc_platform_data usb_data = {
>> -#if defined(CONFIG_USB_MUSB_OTG)
>> /* OTG requires a Mini-AB connector */
>> .mode = MUSB_OTG,
>> -#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
>> - .mode = MUSB_PERIPHERAL,
>> -#elif defined(CONFIG_USB_MUSB_HOST)
>> - .mode = MUSB_HOST,
>> -#endif
>> .clock = "usb",
>> .config =&musb_config,
>> };
>
> Tested it on DM6446-EVM for host mode with MSC thumb drive and gadget
> mode with g-ether. It works.
>
> Acked-by: Manjunathappa, Prakash<[email protected]>
I sent a similiar patch here:
http://comments.gmane.org/gmane.linux.usb.general/54512
If the issues, mentioned from Sergei for my patch, nullified I add my:
Acked-by: Heiko Schocher <[email protected]>
for this patch.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 10/11/2012 12:05 PM, Heiko Schocher wrote:
> Hello Manjunathappa
>
> On 11.10.2012 07:42, Manjunathappa, Prakash wrote:
>> Hi,
>> On Mon, Oct 08, 2012 at 18:47:07, Constantine Shulyupin wrote:
>>> From: Constantine Shulyupin<[email protected]>
>>>
>>> Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
>>> CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
>>> and set MUSB_OTG configuration by default
>>> because this configuration options are removed from Kconfig.
>>>
>>> Signed-off-by: Constantine Shulyupin<[email protected]>
>>>
>>> ---
>>> arch/arm/mach-davinci/usb.c | 6 ------
>>> 1 file changed, 6 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
>>> index f77b953..34509ff 100644
>>> --- a/arch/arm/mach-davinci/usb.c
>>> +++ b/arch/arm/mach-davinci/usb.c
>>> @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
>>> };
>>>
>>> static struct musb_hdrc_platform_data usb_data = {
>>> -#if defined(CONFIG_USB_MUSB_OTG)
>>> /* OTG requires a Mini-AB connector */
>>> .mode = MUSB_OTG,
>>> -#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
>>> - .mode = MUSB_PERIPHERAL,
>>> -#elif defined(CONFIG_USB_MUSB_HOST)
>>> - .mode = MUSB_HOST,
>>> -#endif
>>> .clock = "usb",
>>> .config =&musb_config,
>>> };
>>
>> Tested it on DM6446-EVM for host mode with MSC thumb drive and gadget
>> mode with g-ether. It works.
>>
>> Acked-by: Manjunathappa, Prakash<[email protected]>
>
> I sent a similiar patch here:
>
> http://comments.gmane.org/gmane.linux.usb.general/54512
>
> If the issues, mentioned from Sergei for my patch, nullified I add my:
The last outstanding issue from Sergei seems to be additional comments
describing why MUSB_OTG is OK to use.
Prakash/Constantine,
Did you have to make any hardware changes when testing host/gadget on
DM6446 EVM? Or change in kernel configuration?
It appears that there is no way to choose any of the config option
affecting the mode setting. Right now it seems to be just defaulting to
MUSB_UNDEFINED. Setting it to MUSB_OTG would be better than that.
Thanks,
Sekhar
I've tested gadget mode on DM365 without HW changes.
On Thu, Oct 11, 2012 at 10:50 AM, Sekhar Nori <[email protected]> wrote:
> On 10/11/2012 12:05 PM, Heiko Schocher wrote:
>> Hello Manjunathappa
>>
>> On 11.10.2012 07:42, Manjunathappa, Prakash wrote:
>>> Hi,
>>> On Mon, Oct 08, 2012 at 18:47:07, Constantine Shulyupin wrote:
>>>> From: Constantine Shulyupin<[email protected]>
>>>>
>>>> Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
>>>> CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
>>>> and set MUSB_OTG configuration by default
>>>> because this configuration options are removed from Kconfig.
>>>>
>>>> Signed-off-by: Constantine Shulyupin<[email protected]>
>>>>
>>>> ---
>>>> arch/arm/mach-davinci/usb.c | 6 ------
>>>> 1 file changed, 6 deletions(-)
>>>>
>>>> diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
>>>> index f77b953..34509ff 100644
>>>> --- a/arch/arm/mach-davinci/usb.c
>>>> +++ b/arch/arm/mach-davinci/usb.c
>>>> @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
>>>> };
>>>>
>>>> static struct musb_hdrc_platform_data usb_data = {
>>>> -#if defined(CONFIG_USB_MUSB_OTG)
>>>> /* OTG requires a Mini-AB connector */
>>>> .mode = MUSB_OTG,
>>>> -#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
>>>> - .mode = MUSB_PERIPHERAL,
>>>> -#elif defined(CONFIG_USB_MUSB_HOST)
>>>> - .mode = MUSB_HOST,
>>>> -#endif
>>>> .clock = "usb",
>>>> .config =&musb_config,
>>>> };
>>>
>>> Tested it on DM6446-EVM for host mode with MSC thumb drive and gadget
>>> mode with g-ether. It works.
>>>
>>> Acked-by: Manjunathappa, Prakash<[email protected]>
>>
>> I sent a similiar patch here:
>>
>> http://comments.gmane.org/gmane.linux.usb.general/54512
>>
>> If the issues, mentioned from Sergei for my patch, nullified I add my:
>
> The last outstanding issue from Sergei seems to be additional comments
> describing why MUSB_OTG is OK to use.
>
> Prakash/Constantine,
>
> Did you have to make any hardware changes when testing host/gadget on
> DM6446 EVM? Or change in kernel configuration?
>
> It appears that there is no way to choose any of the config option
> affecting the mode setting. Right now it seems to be just defaulting to
> MUSB_UNDEFINED. Setting it to MUSB_OTG would be better than that.
>
> Thanks,
> Sekhar
--
Constantine Shulyupin
http://www.MakeLinux.com/
Embedded Linux Systems,
Device Drivers, TI DaVinci
On 10/8/2012 6:47 PM, Constantine Shulyupin wrote:
> From: Constantine Shulyupin <[email protected]>
>
> Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
> CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
> and set MUSB_OTG configuration by default
> because this configuration options are removed from Kconfig.
>
> Signed-off-by: Constantine Shulyupin <[email protected]>
Queuing this patch for v3.8. Since the config options are removed there
is no use having code which refers to them. The patch has been tested on
DM644x and DM365 in both host and gadget mode (I will add this
information to commit text while committing). Without this patch .mode
seems to be defaulting to MUSB_UNDEFINED which I think is definitely wrong.
Thanks,
Sekhar
>
> ---
> arch/arm/mach-davinci/usb.c | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
> index f77b953..34509ff 100644
> --- a/arch/arm/mach-davinci/usb.c
> +++ b/arch/arm/mach-davinci/usb.c
> @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
> };
>
> static struct musb_hdrc_platform_data usb_data = {
> -#if defined(CONFIG_USB_MUSB_OTG)
> /* OTG requires a Mini-AB connector */
> .mode = MUSB_OTG,
> -#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
> - .mode = MUSB_PERIPHERAL,
> -#elif defined(CONFIG_USB_MUSB_HOST)
> - .mode = MUSB_HOST,
> -#endif
> .clock = "usb",
> .config = &musb_config,
> };
>
Hi,
On Tue, Oct 23, 2012 at 06:04:53PM +0530, Sekhar Nori wrote:
> On 10/8/2012 6:47 PM, Constantine Shulyupin wrote:
> > From: Constantine Shulyupin <[email protected]>
> >
> > Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
> > CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
> > and set MUSB_OTG configuration by default
> > because this configuration options are removed from Kconfig.
> >
> > Signed-off-by: Constantine Shulyupin <[email protected]>
>
> Queuing this patch for v3.8. Since the config options are removed there
> is no use having code which refers to them. The patch has been tested on
> DM644x and DM365 in both host and gadget mode (I will add this
> information to commit text while committing). Without this patch .mode
> seems to be defaulting to MUSB_UNDEFINED which I think is definitely wrong.
sorry for the delay, this looks ok:
Acked-by: Felipe Balbi <[email protected]>
>
> Thanks,
> Sekhar
>
> >
> > ---
> > arch/arm/mach-davinci/usb.c | 6 ------
> > 1 file changed, 6 deletions(-)
> >
> > diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
> > index f77b953..34509ff 100644
> > --- a/arch/arm/mach-davinci/usb.c
> > +++ b/arch/arm/mach-davinci/usb.c
> > @@ -42,14 +42,8 @@ static struct musb_hdrc_config musb_config = {
> > };
> >
> > static struct musb_hdrc_platform_data usb_data = {
> > -#if defined(CONFIG_USB_MUSB_OTG)
> > /* OTG requires a Mini-AB connector */
> > .mode = MUSB_OTG,
> > -#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
> > - .mode = MUSB_PERIPHERAL,
> > -#elif defined(CONFIG_USB_MUSB_HOST)
> > - .mode = MUSB_HOST,
> > -#endif
> > .clock = "usb",
> > .config = &musb_config,
> > };
> >
--
balbi
On 10/23/2012 6:09 PM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Oct 23, 2012 at 06:04:53PM +0530, Sekhar Nori wrote:
>> On 10/8/2012 6:47 PM, Constantine Shulyupin wrote:
>>> From: Constantine Shulyupin <[email protected]>
>>>
>>> Remove USB configuration in arch/arm/mach-davinci/usb.c accordingly
>>> CONFIG_USB_MUSB_OTG CONFIG_USB_MUSB_PERIPHERAL CONFIG_USB_MUSB_HOST
>>> and set MUSB_OTG configuration by default
>>> because this configuration options are removed from Kconfig.
>>>
>>> Signed-off-by: Constantine Shulyupin <[email protected]>
>>
>> Queuing this patch for v3.8. Since the config options are removed there
>> is no use having code which refers to them. The patch has been tested on
>> DM644x and DM365 in both host and gadget mode (I will add this
>> information to commit text while committing). Without this patch .mode
>> seems to be defaulting to MUSB_UNDEFINED which I think is definitely wrong.
>
> sorry for the delay, this looks ok:
>
> Acked-by: Felipe Balbi <[email protected]>
Thanks Felipe, I added your ack.
Constantine,
Patches touching arch/arm/* should be prefixed with 'ARM:' and those
touching mach-davinci should be prefixed with 'davinci:'. I added these
two while committing the patch this time. Please take care next time on.
Thanks,
Sekhar