This reverts commit c2d94f72140a28d0f516b7c5e8274a9c185a04ff.
The `lg_lp120up1_mode` defined in panel-edp.c is not working for some
panels used on elm/hana devices. Move the panel node out of the aux-bus
subnode so the driver only uses the modes retrieved from the EDID.
Signed-off-by: Pin-yen Lin <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++-----------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index d452cab28c67..d45a2aeb0eb1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -90,6 +90,18 @@ switch-volume-up {
};
};
+ panel: panel {
+ compatible = "lg,lp120up1";
+ power-supply = <&panel_fixed_3v3>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&ps8640_out>;
+ };
+ };
+ };
+
panel_fixed_3v3: regulator1 {
compatible = "regulator-fixed";
regulator-name = "PANEL_3V3";
@@ -282,20 +294,6 @@ ps8640_out: endpoint {
};
};
};
-
- aux-bus {
- panel: panel {
- compatible = "lg,lp120up1";
- power-supply = <&panel_fixed_3v3>;
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&ps8640_out>;
- };
- };
- };
- };
};
};
--
2.40.0.rc1.284.g88254d51c5-goog
Il 15/03/23 05:11, Pin-yen Lin ha scritto:
> This reverts commit c2d94f72140a28d0f516b7c5e8274a9c185a04ff.
>
> The `lg_lp120up1_mode` defined in panel-edp.c is not working for some
> panels used on elm/hana devices. Move the panel node out of the aux-bus
> subnode so the driver only uses the modes retrieved from the EDID.
>
> Signed-off-by: Pin-yen Lin <[email protected]>
>
This commit was sent to fix display functionality on MT8173-Elm (Acer Chromebook
R13).... apparently this should get fixed with [1].
Investigating if this is the case.
Regards,
Angelo
[1]:
https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
> ---
>
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++-----------
> 1 file changed, 12 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index d452cab28c67..d45a2aeb0eb1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -90,6 +90,18 @@ switch-volume-up {
> };
> };
>
> + panel: panel {
> + compatible = "lg,lp120up1";
> + power-supply = <&panel_fixed_3v3>;
> + backlight = <&backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&ps8640_out>;
> + };
> + };
> + };
> +
> panel_fixed_3v3: regulator1 {
> compatible = "regulator-fixed";
> regulator-name = "PANEL_3V3";
> @@ -282,20 +294,6 @@ ps8640_out: endpoint {
> };
> };
> };
> -
> - aux-bus {
> - panel: panel {
> - compatible = "lg,lp120up1";
> - power-supply = <&panel_fixed_3v3>;
> - backlight = <&backlight>;
> -
> - port {
> - panel_in: endpoint {
> - remote-endpoint = <&ps8640_out>;
> - };
> - };
> - };
> - };
> };
> };
>
Hi all,
I would like to drop this patch because 102e80d1fa2c ("drm/bridge:
ps8640: Use atomic variants of drm_bridge_funcs") breaks the
ps8640_bridge_get_edid function. The atomic helper requires an atomic
state to do the chain enablement, but we don't have that in the
.get_edid callback.
The latest ChromeOS tree uses the "aux-bus" with "edp-panel"
compatible string, and it seems to be working well. I'll upload
another patch to update this.
Best regards,
Pin-yen
On Wed, Mar 15, 2023 at 6:34 PM AngeloGioacchino Del Regno
<[email protected]> wrote:
>
> Il 15/03/23 05:11, Pin-yen Lin ha scritto:
> > This reverts commit c2d94f72140a28d0f516b7c5e8274a9c185a04ff.
> >
> > The `lg_lp120up1_mode` defined in panel-edp.c is not working for some
> > panels used on elm/hana devices. Move the panel node out of the aux-bus
> > subnode so the driver only uses the modes retrieved from the EDID.
> >
> > Signed-off-by: Pin-yen Lin <[email protected]>
> >
>
> This commit was sent to fix display functionality on MT8173-Elm (Acer Chromebook
> R13).... apparently this should get fixed with [1].
>
> Investigating if this is the case.
>
> Regards,
> Angelo
>
> [1]:
> https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/
>
> > ---
> >
> > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 26 +++++++++-----------
> > 1 file changed, 12 insertions(+), 14 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > index d452cab28c67..d45a2aeb0eb1 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> > @@ -90,6 +90,18 @@ switch-volume-up {
> > };
> > };
> >
> > + panel: panel {
> > + compatible = "lg,lp120up1";
> > + power-supply = <&panel_fixed_3v3>;
> > + backlight = <&backlight>;
> > +
> > + port {
> > + panel_in: endpoint {
> > + remote-endpoint = <&ps8640_out>;
> > + };
> > + };
> > + };
> > +
> > panel_fixed_3v3: regulator1 {
> > compatible = "regulator-fixed";
> > regulator-name = "PANEL_3V3";
> > @@ -282,20 +294,6 @@ ps8640_out: endpoint {
> > };
> > };
> > };
> > -
> > - aux-bus {
> > - panel: panel {
> > - compatible = "lg,lp120up1";
> > - power-supply = <&panel_fixed_3v3>;
> > - backlight = <&backlight>;
> > -
> > - port {
> > - panel_in: endpoint {
> > - remote-endpoint = <&ps8640_out>;
> > - };
> > - };
> > - };
> > - };
> > };
> > };
> >
>