2016-04-01 11:26:21

by Vivek Gautam

[permalink] [raw]
Subject: [PATCH 1/2] phy: Group vendor specific phy drivers

Adding vendor specific directories in phy to group
phy drivers under their respective vendor umbrella.

Signed-off-by: Vivek Gautam <[email protected]>
---

With growing number of phy drivers, it makes sense to
group these drivers under their respective vendor/platform
umbrella directory.

Build-tested 'multi_v7_defconfig'.

drivers/phy/Kconfig | 386 +---------------------
drivers/phy/Makefile | 57 +---
drivers/phy/bcom/Kconfig | 27 ++
drivers/phy/bcom/Makefile | 3 +
drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
drivers/phy/hisi/Kconfig | 20 ++
drivers/phy/hisi/Makefile | 2 +
drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
drivers/phy/marvell/Kconfig | 50 +++
drivers/phy/marvell/Makefile | 6 +
drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
drivers/phy/qcom/Kconfig | 23 ++
drivers/phy/qcom/Makefile | 5 +
drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
drivers/phy/rcar/Kconfig | 16 +
drivers/phy/rcar/Makefile | 2 +
drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
drivers/phy/rockchip/Kconfig | 23 ++
drivers/phy/rockchip/Makefile | 3 +
drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
drivers/phy/samsung/Kconfig | 87 +++++
drivers/phy/samsung/Makefile | 10 +
drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
drivers/phy/st/Kconfig | 51 +++
drivers/phy/st/Makefile | 6 +
drivers/phy/{ => st}/phy-miphy28lp.c | 0
drivers/phy/{ => st}/phy-miphy365x.c | 0
drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
drivers/phy/{ => st}/phy-stih407-usb.c | 0
drivers/phy/{ => st}/phy-stih41x-usb.c | 0
drivers/phy/sunxi/Kconfig | 28 ++
drivers/phy/sunxi/Makefile | 2 +
drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
drivers/phy/ti/Kconfig | 67 ++++
drivers/phy/ti/Makefile | 6 +
drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
drivers/phy/{ => ti}/phy-omap-control.c | 0
drivers/phy/{ => ti}/phy-omap-usb2.c | 0
drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
drivers/phy/{ => ti}/phy-tusb1210.c | 0
drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
drivers/phy/{ => ti}/ulpi_phy.h | 0
71 files changed, 464 insertions(+), 416 deletions(-)
create mode 100644 drivers/phy/bcom/Kconfig
create mode 100644 drivers/phy/bcom/Makefile
rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
create mode 100644 drivers/phy/hisi/Kconfig
create mode 100644 drivers/phy/hisi/Makefile
rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
create mode 100644 drivers/phy/marvell/Kconfig
create mode 100644 drivers/phy/marvell/Makefile
rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
create mode 100644 drivers/phy/qcom/Kconfig
create mode 100644 drivers/phy/qcom/Makefile
rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
create mode 100644 drivers/phy/rcar/Kconfig
create mode 100644 drivers/phy/rcar/Makefile
rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
create mode 100644 drivers/phy/rockchip/Kconfig
create mode 100644 drivers/phy/rockchip/Makefile
rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
create mode 100644 drivers/phy/samsung/Kconfig
create mode 100644 drivers/phy/samsung/Makefile
rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
create mode 100644 drivers/phy/st/Kconfig
create mode 100644 drivers/phy/st/Makefile
rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
create mode 100644 drivers/phy/sunxi/Kconfig
create mode 100644 drivers/phy/sunxi/Makefile
rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
create mode 100644 drivers/phy/ti/Kconfig
create mode 100644 drivers/phy/ti/Makefile
rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
rename drivers/phy/{ => ti}/ulpi_phy.h (100%)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 26566db..80c8c68 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,45 +15,6 @@ config GENERIC_PHY
phy users can obtain reference to the PHY. All the users of this
framework should select this config.

-config PHY_BERLIN_USB
- tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the USB PHY on Marvell Berlin SoCs.
-
-config PHY_BERLIN_SATA
- tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the SATA PHY on Marvell Berlin SoCs.
-
-config ARMADA375_USBCLUSTER_PHY
- def_bool y
- depends on MACH_ARMADA_375 || COMPILE_TEST
- depends on OF && HAS_IOMEM
- select GENERIC_PHY
-
-config PHY_DM816X_USB
- tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this for dm816x USB to work.
-
-config PHY_EXYNOS_MIPI_VIDEO
- tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
- depends on HAS_IOMEM
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- select GENERIC_PHY
- default y if ARCH_S5PV210 || ARCH_EXYNOS
- help
- Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
- and EXYNOS SoCs.
-
config PHY_LPC18XX_USB_OTG
tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG
This driver is need for USB0 support on LPC18xx/43xx and takes
care of enabling and clock setup.

-config PHY_PXA_28NM_HSIC
- tristate "Marvell USB HSIC 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB HSIC PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell ehci driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_PXA_28NM_USB2
- tristate "Marvell USB 2.0 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB 2.0 PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell udc/ehci/otg driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_MVEBU_SATA
- def_bool y
- depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
- depends on OF
- select GENERIC_PHY
-
-config PHY_MIPHY28LP
- tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
- depends on ARCH_STI
- select GENERIC_PHY
- help
- Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
- that is part of STMicroelectronics STiH407 SoC.
-
-config PHY_MIPHY365X
- tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
- depends on ARCH_STI
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- help
- Enable this to support the miphy transceiver (for SATA/PCIE)
- that is part of STMicroelectronics STiH41x SoC series.
-
-config PHY_RCAR_GEN2
- tristate "Renesas R-Car generation 2 USB PHY driver"
- depends on ARCH_SHMOBILE
- depends on GENERIC_PHY
- help
- Support for USB PHY found on Renesas R-Car generation 2 SoCs.
-
-config PHY_RCAR_GEN3_USB2
- tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
- depends on OF && ARCH_SHMOBILE
- select GENERIC_PHY
- help
- Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
-
-config OMAP_CONTROL_PHY
- tristate "OMAP CONTROL PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- help
- Enable this to add support for the PHY part present in the control
- module. This driver has API to power on the USB2 PHY and to write to
- the mailbox. The mailbox is present only in omap4 and the register to
- power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
- additional register to power on USB3 PHY/SATA PHY/PCIE PHY
- (PIPE3 PHY).
-
-config OMAP_USB2
- tristate "OMAP USB2 PHY Driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the transceiver that is part of SOC. This
- driver takes care of all the PHY functionality apart from comparator.
- The USB OTG controller communicates with the comparator using this
- driver.
-
-config TI_PIPE3
- tristate "TI PIPE3 PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- select GENERIC_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the PIPE3 PHY that is part of TI SOCs. This
- driver takes care of all the PHY functionality apart from comparator.
- This driver interacts with the "OMAP Control PHY Driver" to power
- on/off the PHY.
-
-config TWL4030_USB
- tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this to support the USB OTG transceiver on TWL4030
- family chips (including the TWL5030 and TPS659x0 devices).
- This transceiver supports high and full speed devices plus,
- in host mode, low speed.
-
-config PHY_EXYNOS_DP_VIDEO
- tristate "EXYNOS SoC series Display Port PHY driver"
- depends on OF
- depends on ARCH_EXYNOS || COMPILE_TEST
- default ARCH_EXYNOS
- select GENERIC_PHY
- help
- Support for Display Port PHY found on Samsung EXYNOS SoCs.
-
-config BCM_KONA_USB2_PHY
- tristate "Broadcom Kona USB2 PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support the Broadcom Kona USB 2.0 PHY.
-
-config PHY_EXYNOS5250_SATA
- tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- select I2C
- select I2C_S3C2410
- select MFD_SYSCON
- help
- Enable this to support SATA SerDes/Phy found on Samsung's
- Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
- SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
- port to accept one SATA device.
-
-config PHY_HIX5HD2_SATA
- tristate "HIX5HD2 SATA PHY Driver"
- depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Support for SATA PHY on Hisilicon hix5hd2 Soc.
-
config PHY_MT65XX_USB3
tristate "Mediatek USB3.0 PHY Driver"
depends on ARCH_MEDIATEK && OF
@@ -222,93 +35,6 @@ config PHY_MT65XX_USB3
for mt65xx SoCs. it supports two usb2.0 ports and
one usb3.0 port.

-config PHY_HI6220_USB
- tristate "hi6220 USB PHY support"
- depends on (ARCH_HISI && ARM64) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the HISILICON HI6220 USB PHY.
-
- To compile this driver as a module, choose M here.
-
-config PHY_SUN4I_USB
- tristate "Allwinner sunxi SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on EXTCON
- depends on POWER_SUPPLY
- select GENERIC_PHY
- help
- Enable this to support the transceiver that is part of Allwinner
- sunxi SoCs.
-
- This driver controls the entire USB PHY block, both the USB OTG
- parts, as well as the 2 regular USB 2 host PHYs.
-
-config PHY_SUN9I_USB
- tristate "Allwinner sun9i SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on USB_COMMON
- select GENERIC_PHY
- help
- Enable this to support the transceiver that is part of Allwinner
- sun9i SoCs.
-
- This driver controls each individual USB 2 host PHY.
-
-config PHY_SAMSUNG_USB2
- tristate "Samsung USB 2.0 PHY driver"
- depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
- select GENERIC_PHY
- select MFD_SYSCON
- default ARCH_EXYNOS
- help
- Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support
- for particular PHYs will be enabled based on the SoC type in addition
- to this driver.
-
-config PHY_S5PV210_USB2
- bool "Support for S5PV210"
- depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
- help
- Enable USB PHY support for S5PV210. This option requires that Samsung
- USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of S5PV210 two phys
- are available - device and host.
-
-config PHY_EXYNOS4210_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default CPU_EXYNOS4210
-
-config PHY_EXYNOS4X12_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
-
-config PHY_EXYNOS5250_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS5250 || SOC_EXYNOS5420
-
-config PHY_EXYNOS5_USBDRD
- tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
- depends on HAS_IOMEM
- depends on USB_DWC3_EXYNOS
- select GENERIC_PHY
- select MFD_SYSCON
- default y
- help
- Enable USB DRD PHY support for Exynos 5 SoC series.
- This driver provides PHY interface for USB 3.0 DRD controller
- present on Exynos5 SoC series.
-
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
@@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB
help
Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.

-config PHY_QCOM_APQ8064_SATA
- tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_QCOM_IPQ806X_SATA
- tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_ROCKCHIP_USB
- tristate "Rockchip USB2 PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip USB 2.0 PHY.
-
-config PHY_ROCKCHIP_EMMC
- tristate "Rockchip EMMC PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip EMMC PHY.
-
-config PHY_ROCKCHIP_DP
- tristate "Rockchip Display Port PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip Display Port PHY.
-
-config PHY_ST_SPEAR1310_MIPHY
- tristate "ST SPEAR1310-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1310 || COMPILE_TEST
- help
- Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
-
-config PHY_ST_SPEAR1340_MIPHY
- tristate "ST SPEAR1340-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1340 || COMPILE_TEST
- help
- Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
-
config PHY_XGENE
tristate "APM X-Gene 15Gbps PHY support"
depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
@@ -372,53 +49,20 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.

-config PHY_STIH407_USB
- tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
- depends on RESET_CONTROLLER
- depends on ARCH_STI || COMPILE_TEST
- select GENERIC_PHY
- help
- Enable this support to enable the picoPHY device used by USB2
- and USB3 controllers on STMicroelectronics STiH407 SoC families.
-
-config PHY_STIH41X_USB
- tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
- depends on ARCH_STI
- select GENERIC_PHY
- help
- Enable this to support the USB transceiver that is part of
- STMicroelectronics STiH41x SoC series.
-
-config PHY_QCOM_UFS
- tristate "Qualcomm UFS PHY driver"
- depends on OF && ARCH_QCOM
- select GENERIC_PHY
- help
- Support for UFS PHY on QCOM chipsets.
-
-config PHY_TUSB1210
- tristate "TI TUSB1210 ULPI PHY module"
- depends on USB_ULPI_BUS
- select GENERIC_PHY
- help
- Support for TI TUSB1210 USB ULPI PHY.
-
-config PHY_BRCMSTB_SATA
- tristate "Broadcom STB SATA PHY driver"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
- depends on OF
- select GENERIC_PHY
- help
- Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
- Likely useful only with CONFIG_SATA_BRCMSTB enabled.
-
-config PHY_CYGNUS_PCIE
- tristate "Broadcom Cygnus PCIe PHY driver"
- depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_CYGNUS
- help
- Enable this to support the Broadcom Cygnus PCIe PHY.
- If unsure, say N.
+menuconfig PHY_PLAT
+ bool "Platform Phy drivers"
+
+if PHY_PLAT
+source "drivers/phy/bcom/Kconfig"
+source "drivers/phy/hisi/Kconfig"
+source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/qcom/Kconfig"
+source "drivers/phy/rcar/Kconfig"
+source "drivers/phy/rockchip/Kconfig"
+source "drivers/phy/samsung/Kconfig"
+source "drivers/phy/st/Kconfig"
+source "drivers/phy/sunxi/Kconfig"
+source "drivers/phy/ti/Kconfig"
+endif

endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 24596a9..73d563b 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,52 +3,19 @@
#

obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
-obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
-obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
-obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
-obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
-obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
-obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
-obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
-obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
-obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
-obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
-obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
-obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
-obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
-obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
-obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
-obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
-obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
-obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
-obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
-phy-exynos-usb2-y += phy-samsung-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
-obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
-obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
-obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
-obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
-obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
-obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
-obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
-obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+
+# Phy drivers for different platforms.
+obj-$(CONFIG_PHY_PLAT) += bcom/ \
+ hisi/ \
+ marvell/ \
+ qcom/ \
+ rcar/ \
+ rockchip/ \
+ samsung/ \
+ st/ \
+ sunxi/ \
+ ti/
diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig
new file mode 100644
index 0000000..8243372
--- /dev/null
+++ b/drivers/phy/bcom/Kconfig
@@ -0,0 +1,27 @@
+#
+# PHY drivers for Broadcom platforms
+#
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
+config BCM_KONA_USB2_PHY
+ tristate "Broadcom Kona USB2 PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the Broadcom Kona USB 2.0 PHY.
+
+config PHY_BRCMSTB_SATA
+ tristate "Broadcom STB SATA PHY driver"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ depends on OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
+ Likely useful only with CONFIG_SATA_BRCMSTB enabled.
diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile
new file mode 100644
index 0000000..f30fa76
--- /dev/null
+++ b/drivers/phy/bcom/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
+obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c
similarity index 100%
rename from drivers/phy/phy-bcm-cygnus-pcie.c
rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/bcom/phy-bcm-kona-usb2.c
similarity index 100%
rename from drivers/phy/phy-bcm-kona-usb2.c
rename to drivers/phy/bcom/phy-bcm-kona-usb2.c
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/bcom/phy-brcmstb-sata.c
similarity index 100%
rename from drivers/phy/phy-brcmstb-sata.c
rename to drivers/phy/bcom/phy-brcmstb-sata.c
diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig
new file mode 100644
index 0000000..affa9ed
--- /dev/null
+++ b/drivers/phy/hisi/Kconfig
@@ -0,0 +1,20 @@
+#
+# PHY drivers for HiSilicon platforms
+#
+config PHY_HIX5HD2_SATA
+ tristate "HIX5HD2 SATA PHY Driver"
+ depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for SATA PHY on Hisilicon hix5hd2 Soc.
+
+config PHY_HI6220_USB
+ tristate "hi6220 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI6220 USB PHY.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile
new file mode 100644
index 0000000..6059ed8
--- /dev/null
+++ b/drivers/phy/hisi/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisi/phy-hi6220-usb.c
similarity index 100%
rename from drivers/phy/phy-hi6220-usb.c
rename to drivers/phy/hisi/phy-hi6220-usb.c
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisi/phy-hix5hd2-sata.c
similarity index 100%
rename from drivers/phy/phy-hix5hd2-sata.c
rename to drivers/phy/hisi/phy-hix5hd2-sata.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
new file mode 100644
index 0000000..6c1576c
--- /dev/null
+++ b/drivers/phy/marvell/Kconfig
@@ -0,0 +1,50 @@
+#
+# PHY drivers for Marvell platforms
+#
+config ARMADA375_USBCLUSTER_PHY
+ def_bool y
+ depends on MACH_ARMADA_375 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+
+config PHY_BERLIN_USB
+ tristate "Marvell Berlin USB PHY Driver"
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the USB PHY on Marvell Berlin SoCs.
+
+config PHY_BERLIN_SATA
+ tristate "Marvell Berlin SATA PHY driver"
+ depends on ARCH_BERLIN && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
+config PHY_MVEBU_SATA
+ def_bool y
+ depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_PXA_28NM_HSIC
+ tristate "Marvell USB HSIC 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB HSIC PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell ehci driver.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+ tristate "Marvell USB 2.0 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB 2.0 PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
new file mode 100644
index 0000000..f4fa255
--- /dev/null
+++ b/drivers/phy/marvell/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
+obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
+obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
+obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
similarity index 100%
rename from drivers/phy/phy-armada375-usb2.c
rename to drivers/phy/marvell/phy-armada375-usb2.c
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
similarity index 100%
rename from drivers/phy/phy-berlin-sata.c
rename to drivers/phy/marvell/phy-berlin-sata.c
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
similarity index 100%
rename from drivers/phy/phy-berlin-usb.c
rename to drivers/phy/marvell/phy-berlin-usb.c
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
similarity index 100%
rename from drivers/phy/phy-mvebu-sata.c
rename to drivers/phy/marvell/phy-mvebu-sata.c
diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-hsic.c
rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c
diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-usb2.c
rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
new file mode 100644
index 0000000..9718d01
--- /dev/null
+++ b/drivers/phy/qcom/Kconfig
@@ -0,0 +1,23 @@
+#
+# PHY drivers for Qualcomm platforms
+#
+config PHY_QCOM_APQ8064_SATA
+ tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_UFS
+ tristate "Qualcomm UFS PHY driver"
+ depends on OF && ARCH_QCOM
+ select GENERIC_PHY
+ help
+ Support for UFS PHY on QCOM chipsets.
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
new file mode 100644
index 0000000..2db3e77
--- /dev/null
+++ b/drivers/phy/qcom/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \
+ += phy-qcom-ufs-qmp-20nm.o \
+ += phy-qcom-ufs-qmp-14nm.o
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qcom/phy-qcom-apq8064-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-apq8064-sata.c
rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c
diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-ipq806x-sata.c
rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qcom/phy-qcom-ufs-i.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-i.h
rename to drivers/phy/qcom/phy-qcom-ufs-i.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h
rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs.c
rename to drivers/phy/qcom/phy-qcom-ufs.c
diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig
new file mode 100644
index 0000000..169b5e2
--- /dev/null
+++ b/drivers/phy/rcar/Kconfig
@@ -0,0 +1,16 @@
+#
+# PHY drivers for Renesas's r-car platforms
+#
+config PHY_RCAR_GEN2
+ tristate "Renesas R-Car generation 2 USB PHY driver"
+ depends on ARCH_SHMOBILE
+ depends on GENERIC_PHY
+ help
+ Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+ tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+ depends on OF && ARCH_SHMOBILE
+ select GENERIC_PHY
+ help
+ Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile
new file mode 100644
index 0000000..695241a
--- /dev/null
+++ b/drivers/phy/rcar/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/rcar/phy-rcar-gen2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen2.c
rename to drivers/phy/rcar/phy-rcar-gen2.c
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/rcar/phy-rcar-gen3-usb2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen3-usb2.c
rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 0000000..c575d1e
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,23 @@
+#
+# PHY drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_USB
+ tristate "Rockchip USB2 PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB 2.0 PHY.
+
+config PHY_ROCKCHIP_EMMC
+ tristate "Rockchip EMMC PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 0000000..c15acc1
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
similarity index 100%
rename from drivers/phy/phy-rockchip-dp.c
rename to drivers/phy/rockchip/phy-rockchip-dp.c
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
similarity index 100%
rename from drivers/phy/phy-rockchip-emmc.c
rename to drivers/phy/rockchip/phy-rockchip-emmc.c
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
similarity index 100%
rename from drivers/phy/phy-rockchip-usb.c
rename to drivers/phy/rockchip/phy-rockchip-usb.c
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 0000000..80bdea7
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,87 @@
+#
+# PHY drivers for Samsung platforms
+#
+config PHY_SAMSUNG_USB2
+ tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default ARCH_EXYNOS
+ help
+ Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
+
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_EXYNOS5_USBDRD
+ tristate "Exynos5 SoC series USB DRD PHY driver"
+ depends on ARCH_EXYNOS && OF
+ depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default y
+ help
+ Enable USB DRD PHY support for Exynos 5 SoC series.
+ This driver provides PHY interface for USB 3.0 DRD controller
+ present on Exynos5 SoC series.
+
+config PHY_EXYNOS_DP_VIDEO
+ tristate "EXYNOS SoC series Display Port PHY driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select GENERIC_PHY
+ help
+ Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+config PHY_EXYNOS_MIPI_VIDEO
+ tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+ depends on HAS_IOMEM
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ default y if ARCH_S5PV210 || ARCH_EXYNOS
+ help
+ Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+ and EXYNOS SoCs.
+
+config PHY_EXYNOS5250_SATA
+ tristate "Exynos5250 Sata SerDes/PHY driver"
+ depends on SOC_EXYNOS5250
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ select I2C
+ select I2C_S3C2410
+ select MFD_SYSCON
+ help
+ Enable this to support SATA SerDes/Phy found on Samsung's
+ Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+ SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+ port to accept one SATA device.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 0000000..585dbd7
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-dp-video.c
rename to drivers/phy/samsung/phy-exynos-dp-video.c
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-mipi-video.c
rename to drivers/phy/samsung/phy-exynos-mipi-video.c
diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4210-usb2.c
rename to drivers/phy/samsung/phy-exynos4210-usb2.c
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4x12-usb2.c
rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
similarity index 100%
rename from drivers/phy/phy-exynos5-usbdrd.c
rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-sata.c
rename to drivers/phy/samsung/phy-exynos5250-sata.c
diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-usb2.c
rename to drivers/phy/samsung/phy-exynos5250-usb2.c
diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
similarity index 100%
rename from drivers/phy/phy-s5pv210-usb2.c
rename to drivers/phy/samsung/phy-s5pv210-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.c
rename to drivers/phy/samsung/phy-samsung-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.h
rename to drivers/phy/samsung/phy-samsung-usb2.h
diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
new file mode 100644
index 0000000..651b2bf
--- /dev/null
+++ b/drivers/phy/st/Kconfig
@@ -0,0 +1,51 @@
+#
+# PHY drivers for ST Micro platforms
+#
+config PHY_MIPHY28LP
+ tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
+ depends on ARCH_STI
+ select GENERIC_PHY
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
+ that is part of STMicroelectronics STiH407 SoC.
+
+config PHY_MIPHY365X
+ tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
+ depends on ARCH_STI
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE)
+ that is part of STMicroelectronics STiH41x SoC series.
+
+config PHY_ST_SPEAR1310_MIPHY
+ tristate "ST SPEAR1310-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1310 || COMPILE_TEST
+ help
+ Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+config PHY_ST_SPEAR1340_MIPHY
+ tristate "ST SPEAR1340-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1340 || COMPILE_TEST
+ help
+ Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
+config PHY_STIH407_USB
+ tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on RESET_CONTROLLER
+ depends on ARCH_STI || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this support to enable the picoPHY device used by USB2
+ and USB3 controllers on STMicroelectronics STiH407 SoC families.
+
+config PHY_STIH41X_USB
+ tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
+ depends on ARCH_STI
+ select GENERIC_PHY
+ help
+ Enable this to support the USB transceiver that is part of
+ STMicroelectronics STiH41x SoC series.
diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
new file mode 100644
index 0000000..907561b
--- /dev/null
+++ b/drivers/phy/st/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
+obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
+obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
+obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
+obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
+obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
similarity index 100%
rename from drivers/phy/phy-miphy28lp.c
rename to drivers/phy/st/phy-miphy28lp.c
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c
similarity index 100%
rename from drivers/phy/phy-miphy365x.c
rename to drivers/phy/st/phy-miphy365x.c
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1310-miphy.c
rename to drivers/phy/st/phy-spear1310-miphy.c
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1340-miphy.c
rename to drivers/phy/st/phy-spear1340-miphy.c
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
similarity index 100%
rename from drivers/phy/phy-stih407-usb.c
rename to drivers/phy/st/phy-stih407-usb.c
diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/st/phy-stih41x-usb.c
similarity index 100%
rename from drivers/phy/phy-stih41x-usb.c
rename to drivers/phy/st/phy-stih41x-usb.c
diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig
new file mode 100644
index 0000000..eb06427
--- /dev/null
+++ b/drivers/phy/sunxi/Kconfig
@@ -0,0 +1,28 @@
+#
+# PHY drivers for Allwinner's sunxi platforms
+#
+config PHY_SUN4I_USB
+ tristate "Allwinner sunxi SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on EXTCON
+ depends on POWER_SUPPLY
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sunxi SoCs.
+
+ This driver controls the entire USB PHY block, both the USB OTG
+ parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN9I_USB
+ tristate "Allwinner sun9i SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sun9i SoCs.
+
+ This driver controls each individual USB 2 host PHY.
diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile
new file mode 100644
index 0000000..8605529c
--- /dev/null
+++ b/drivers/phy/sunxi/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/sunxi/phy-sun4i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun4i-usb.c
rename to drivers/phy/sunxi/phy-sun4i-usb.c
diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/sunxi/phy-sun9i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun9i-usb.c
rename to drivers/phy/sunxi/phy-sun9i-usb.c
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 0000000..1e3e307
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,67 @@
+#
+# PHY drivers for TI platforms
+#
+config PHY_DM816X_USB
+ tristate "TI dm816x USB PHY driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for dm816x USB to work.
+
+config OMAP_CONTROL_PHY
+ tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ help
+ Enable this to add support for the PHY part present in the control
+ module. This driver has API to power on the USB2 PHY and to write to
+ the mailbox. The mailbox is present only in omap4 and the register to
+ power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+ additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+ (PIPE3 PHY).
+
+config OMAP_USB2
+ tristate "OMAP USB2 PHY Driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the transceiver that is part of SOC. This
+ driver takes care of all the PHY functionality apart from comparator.
+ The USB OTG controller communicates with the comparator using this
+ driver.
+
+config TI_PIPE3
+ tristate "TI PIPE3 PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ select GENERIC_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+ driver takes care of all the PHY functionality apart from comparator.
+ This driver interacts with the "OMAP Control PHY Driver" to power
+ on/off the PHY.
+
+config PHY_TUSB1210
+ tristate "TI TUSB1210 ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for TI TUSB1210 USB ULPI PHY.
+
+config TWL4030_USB
+ tristate "TWL4030 USB Transceiver Driver"
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on TWL4030
+ family chips (including the TWL5030 and TPS659x0 devices).
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
new file mode 100644
index 0000000..2d16f77
--- /dev/null
+++ b/drivers/phy/ti/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
+obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
+obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
similarity index 100%
rename from drivers/phy/phy-dm816x-usb.c
rename to drivers/phy/ti/phy-dm816x-usb.c
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c
similarity index 100%
rename from drivers/phy/phy-omap-control.c
rename to drivers/phy/ti/phy-omap-control.c
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
similarity index 100%
rename from drivers/phy/phy-omap-usb2.c
rename to drivers/phy/ti/phy-omap-usb2.c
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
similarity index 100%
rename from drivers/phy/phy-ti-pipe3.c
rename to drivers/phy/ti/phy-ti-pipe3.c
diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
similarity index 100%
rename from drivers/phy/phy-tusb1210.c
rename to drivers/phy/ti/phy-tusb1210.c
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
similarity index 100%
rename from drivers/phy/phy-twl4030-usb.c
rename to drivers/phy/ti/phy-twl4030-usb.c
diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h
similarity index 100%
rename from drivers/phy/ulpi_phy.h
rename to drivers/phy/ti/ulpi_phy.h
--
1.9.1


2016-04-01 11:26:24

by Vivek Gautam

[permalink] [raw]
Subject: [PATCH 2/2] arm: mach-spear: Enable PHY_PLAT to meet dependency

mach-spear enables PHY_ST_SPEAR1310_MIPHY and
PHY_ST_SPEAR1340_MIPHY, which now fall under PHY_PLAT
config. So select CONFIG_PHY_PLAT as well to resolve
dependencies.

Signed-off-by: Vivek Gautam <[email protected]>
Cc: Shiraz Hashim <[email protected]>
---
arch/arm/mach-spear/Kconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index ea9ea95..c0a62fd 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -29,6 +29,7 @@ if ARCH_SPEAR13XX
config MACH_SPEAR1310
bool "SPEAr1310 Machine support with Device Tree"
select PINCTRL_SPEAR1310
+ select PHY_PLAT
select PHY_ST_SPEAR1310_MIPHY
help
Supports ST SPEAr1310 machine configured via the device-tree
@@ -36,6 +37,7 @@ config MACH_SPEAR1310
config MACH_SPEAR1340
bool "SPEAr1340 Machine support with Device Tree"
select PINCTRL_SPEAR1340
+ select PHY_PLAT
select PHY_ST_SPEAR1340_MIPHY
help
Supports ST SPEAr1340 machine configured via the device-tree
--
1.9.1

2016-04-01 11:39:25

by Viresh Kumar

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

On 01-04-16, 16:59, Vivek Gautam wrote:
> Adding vendor specific directories in phy to group
> phy drivers under their respective vendor umbrella.
>
> Signed-off-by: Vivek Gautam <[email protected]>
> ---
> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>

Acked-by: Viresh Kumar <[email protected]>

--
viresh

2016-04-01 11:42:23

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi,

On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote:
> create mode 100644 drivers/phy/sunxi/Kconfig
> create mode 100644 drivers/phy/sunxi/Makefile
> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)

That would be allwinner in this case, sunxi is the SoC family
Allwinner produces.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


Attachments:
(No filename) (477.00 B)
signature.asc (819.00 B)
Digital signature
Download all attachments

2016-04-01 11:42:32

by Viresh Kumar

[permalink] [raw]
Subject: Re: [PATCH 2/2] arm: mach-spear: Enable PHY_PLAT to meet dependency

On 01-04-16, 16:59, Vivek Gautam wrote:
> mach-spear enables PHY_ST_SPEAR1310_MIPHY and
> PHY_ST_SPEAR1340_MIPHY, which now fall under PHY_PLAT
> config. So select CONFIG_PHY_PLAT as well to resolve
> dependencies.
>
> Signed-off-by: Vivek Gautam <[email protected]>
> Cc: Shiraz Hashim <[email protected]>
> ---
> arch/arm/mach-spear/Kconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
> index ea9ea95..c0a62fd 100644
> --- a/arch/arm/mach-spear/Kconfig
> +++ b/arch/arm/mach-spear/Kconfig
> @@ -29,6 +29,7 @@ if ARCH_SPEAR13XX
> config MACH_SPEAR1310
> bool "SPEAr1310 Machine support with Device Tree"
> select PINCTRL_SPEAR1310
> + select PHY_PLAT
> select PHY_ST_SPEAR1310_MIPHY
> help
> Supports ST SPEAr1310 machine configured via the device-tree
> @@ -36,6 +37,7 @@ config MACH_SPEAR1310
> config MACH_SPEAR1340
> bool "SPEAr1340 Machine support with Device Tree"
> select PINCTRL_SPEAR1340
> + select PHY_PLAT
> select PHY_ST_SPEAR1340_MIPHY
> help
> Supports ST SPEAr1340 machine configured via the device-tree

Acked-by: Viresh Kumar <[email protected]>

--
viresh

2016-04-01 12:51:57

by Vivek Gautam

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi,


On Fri, Apr 1, 2016 at 4:42 AM, Maxime Ripard
<[email protected]> wrote:
> Hi,
>
> On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote:
>> create mode 100644 drivers/phy/sunxi/Kconfig
>> create mode 100644 drivers/phy/sunxi/Makefile
>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>
> That would be allwinner in this case, sunxi is the SoC family
> Allwinner produces.

Sure, will change this.
I will change rcar --> renesas too. That should make the directory
names homogeneous (vendor-name).
Thanks for reviewing.

>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com



--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India

2016-04-01 12:52:38

by Vivek Gautam

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

On Fri, Apr 1, 2016 at 4:39 AM, Viresh Kumar <[email protected]> wrote:
> On 01-04-16, 16:59, Vivek Gautam wrote:
>> Adding vendor specific directories in phy to group
>> phy drivers under their respective vendor umbrella.
>>
>> Signed-off-by: Vivek Gautam <[email protected]>
>> ---
>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>
>
> Acked-by: Viresh Kumar <[email protected]>
Thanks Viresh.

>
> --
> viresh
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html



--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India

2016-04-01 13:07:14

by Kishon Vijay Abraham I

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi,

On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
> Adding vendor specific directories in phy to group
> phy drivers under their respective vendor umbrella.
>
> Signed-off-by: Vivek Gautam <[email protected]>
> ---
>
> With growing number of phy drivers, it makes sense to
> group these drivers under their respective vendor/platform
> umbrella directory.
>
> Build-tested 'multi_v7_defconfig'.
>
> drivers/phy/Kconfig | 386 +---------------------
> drivers/phy/Makefile | 57 +---
> drivers/phy/bcom/Kconfig | 27 ++
> drivers/phy/bcom/Makefile | 3 +
> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
> drivers/phy/hisi/Kconfig | 20 ++
> drivers/phy/hisi/Makefile | 2 +
> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
> drivers/phy/marvell/Kconfig | 50 +++
> drivers/phy/marvell/Makefile | 6 +
> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
> drivers/phy/qcom/Kconfig | 23 ++
> drivers/phy/qcom/Makefile | 5 +
> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
> drivers/phy/rcar/Kconfig | 16 +
> drivers/phy/rcar/Makefile | 2 +
> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
> drivers/phy/rockchip/Kconfig | 23 ++
> drivers/phy/rockchip/Makefile | 3 +
> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
> drivers/phy/samsung/Kconfig | 87 +++++
> drivers/phy/samsung/Makefile | 10 +
> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
> drivers/phy/st/Kconfig | 51 +++
> drivers/phy/st/Makefile | 6 +
> drivers/phy/{ => st}/phy-miphy28lp.c | 0
> drivers/phy/{ => st}/phy-miphy365x.c | 0
> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
> drivers/phy/{ => st}/phy-stih407-usb.c | 0
> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
> drivers/phy/sunxi/Kconfig | 28 ++
> drivers/phy/sunxi/Makefile | 2 +
> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
> drivers/phy/ti/Kconfig | 67 ++++
> drivers/phy/ti/Makefile | 6 +
> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
> drivers/phy/{ => ti}/phy-omap-control.c | 0
> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
> drivers/phy/{ => ti}/phy-tusb1210.c | 0
> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
> drivers/phy/{ => ti}/ulpi_phy.h | 0

ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
driver.
> 71 files changed, 464 insertions(+), 416 deletions(-)
> create mode 100644 drivers/phy/bcom/Kconfig
> create mode 100644 drivers/phy/bcom/Makefile
> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
> create mode 100644 drivers/phy/hisi/Kconfig
> create mode 100644 drivers/phy/hisi/Makefile
> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
> create mode 100644 drivers/phy/marvell/Kconfig
> create mode 100644 drivers/phy/marvell/Makefile
> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
> create mode 100644 drivers/phy/qcom/Kconfig
> create mode 100644 drivers/phy/qcom/Makefile
> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
> create mode 100644 drivers/phy/rcar/Kconfig
> create mode 100644 drivers/phy/rcar/Makefile
> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
> create mode 100644 drivers/phy/rockchip/Kconfig
> create mode 100644 drivers/phy/rockchip/Makefile
> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
> create mode 100644 drivers/phy/samsung/Kconfig
> create mode 100644 drivers/phy/samsung/Makefile
> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
> create mode 100644 drivers/phy/st/Kconfig
> create mode 100644 drivers/phy/st/Makefile
> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
> create mode 100644 drivers/phy/sunxi/Kconfig
> create mode 100644 drivers/phy/sunxi/Makefile
> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
> create mode 100644 drivers/phy/ti/Kconfig
> create mode 100644 drivers/phy/ti/Makefile
> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..80c8c68 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -15,45 +15,6 @@ config GENERIC_PHY
> phy users can obtain reference to the PHY. All the users of this
> framework should select this config.
>

> +menuconfig PHY_PLAT
> + bool "Platform Phy drivers"

Not really convinced about adding a new config here. This will create new
dependencies and will also start breaking users of oldconfig.

Also not all of them are platform drivers (e.g ULPI PHY drivers).

Thanks
Kishon

2016-04-01 13:35:33

by Vivek Gautam

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi,


On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <[email protected]> wrote:
> Hi,
>
> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>> Adding vendor specific directories in phy to group
>> phy drivers under their respective vendor umbrella.
>>
>> Signed-off-by: Vivek Gautam <[email protected]>
>> ---
>>
>> With growing number of phy drivers, it makes sense to
>> group these drivers under their respective vendor/platform
>> umbrella directory.
>>
>> Build-tested 'multi_v7_defconfig'.
>>
>> drivers/phy/Kconfig | 386 +---------------------
>> drivers/phy/Makefile | 57 +---
>> drivers/phy/bcom/Kconfig | 27 ++
>> drivers/phy/bcom/Makefile | 3 +
>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
>> drivers/phy/hisi/Kconfig | 20 ++
>> drivers/phy/hisi/Makefile | 2 +
>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
>> drivers/phy/marvell/Kconfig | 50 +++
>> drivers/phy/marvell/Makefile | 6 +
>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
>> drivers/phy/qcom/Kconfig | 23 ++
>> drivers/phy/qcom/Makefile | 5 +
>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
>> drivers/phy/rcar/Kconfig | 16 +
>> drivers/phy/rcar/Makefile | 2 +
>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
>> drivers/phy/rockchip/Kconfig | 23 ++
>> drivers/phy/rockchip/Makefile | 3 +
>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
>> drivers/phy/samsung/Kconfig | 87 +++++
>> drivers/phy/samsung/Makefile | 10 +
>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>> drivers/phy/st/Kconfig | 51 +++
>> drivers/phy/st/Makefile | 6 +
>> drivers/phy/{ => st}/phy-miphy28lp.c | 0
>> drivers/phy/{ => st}/phy-miphy365x.c | 0
>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>> drivers/phy/{ => st}/phy-stih407-usb.c | 0
>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
>> drivers/phy/sunxi/Kconfig | 28 ++
>> drivers/phy/sunxi/Makefile | 2 +
>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
>> drivers/phy/ti/Kconfig | 67 ++++
>> drivers/phy/ti/Makefile | 6 +
>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
>> drivers/phy/{ => ti}/phy-omap-control.c | 0
>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
>> drivers/phy/{ => ti}/phy-tusb1210.c | 0
>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
>> drivers/phy/{ => ti}/ulpi_phy.h | 0
>
> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
> driver.

Yes, you are right. But i was hesitant to add a multi-level header
file include in the phy driver
which uses it.

Does it makes sense to move this ulpi_phy.h to include/linux/phy ?

>> 71 files changed, 464 insertions(+), 416 deletions(-)
>> create mode 100644 drivers/phy/bcom/Kconfig
>> create mode 100644 drivers/phy/bcom/Makefile
>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>> create mode 100644 drivers/phy/hisi/Kconfig
>> create mode 100644 drivers/phy/hisi/Makefile
>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>> create mode 100644 drivers/phy/marvell/Kconfig
>> create mode 100644 drivers/phy/marvell/Makefile
>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>> create mode 100644 drivers/phy/qcom/Kconfig
>> create mode 100644 drivers/phy/qcom/Makefile
>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>> create mode 100644 drivers/phy/rcar/Kconfig
>> create mode 100644 drivers/phy/rcar/Makefile
>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>> create mode 100644 drivers/phy/rockchip/Kconfig
>> create mode 100644 drivers/phy/rockchip/Makefile
>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>> create mode 100644 drivers/phy/samsung/Kconfig
>> create mode 100644 drivers/phy/samsung/Makefile
>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>> create mode 100644 drivers/phy/st/Kconfig
>> create mode 100644 drivers/phy/st/Makefile
>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>> create mode 100644 drivers/phy/sunxi/Kconfig
>> create mode 100644 drivers/phy/sunxi/Makefile
>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>> create mode 100644 drivers/phy/ti/Kconfig
>> create mode 100644 drivers/phy/ti/Makefile
>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 26566db..80c8c68 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>> phy users can obtain reference to the PHY. All the users of this
>> framework should select this config.
>>
>
>> +menuconfig PHY_PLAT
>> + bool "Platform Phy drivers"
>
> Not really convinced about adding a new config here. This will create new
> dependencies and will also start breaking users of oldconfig.

This serves including all the directory paths in the 'make' for
driver/phy/Makefile.

Otherwise each directory will have to be built as per particular platform
And, not all drivers of a vendor are built for one-kind of platform,
for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
Similarly, Broadcom phy drivers are based on multiple platforms, and so
does Marvell's.

Please suggest a concise way to include the vendor directories in the build path
in drivers/phy/Makefile.

>
> Also not all of them are platform drivers (e.g ULPI PHY drivers).
I Think this applies to ulpi_phy only at this moment, which we can resolve
by moving that to include/linux path.

>
> Thanks
> Kishon
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html



--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India

2016-04-01 15:17:32

by Heiko Stuebner

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Am Freitag, 1. April 2016, 16:59:15 schrieb Vivek Gautam:
> Adding vendor specific directories in phy to group
> phy drivers under their respective vendor umbrella.
>
> Signed-off-by: Vivek Gautam <[email protected]>

I don't have a preference about the phy-locations either way, so for
Rockchip phys

Acked-by: Heiko Stuebner <[email protected]>

> ---
>
> With growing number of phy drivers, it makes sense to
> group these drivers under their respective vendor/platform
> umbrella directory.
>
> Build-tested 'multi_v7_defconfig'.
>
> drivers/phy/Kconfig | 386
> +--------------------- drivers/phy/Makefile
> | 57 +---
> drivers/phy/bcom/Kconfig | 27 ++
> drivers/phy/bcom/Makefile | 3 +
> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
> drivers/phy/hisi/Kconfig | 20 ++
> drivers/phy/hisi/Makefile | 2 +
> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
> drivers/phy/marvell/Kconfig | 50 +++
> drivers/phy/marvell/Makefile | 6 +
> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
> drivers/phy/qcom/Kconfig | 23 ++
> drivers/phy/qcom/Makefile | 5 +
> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
> drivers/phy/rcar/Kconfig | 16 +
> drivers/phy/rcar/Makefile | 2 +
> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
> drivers/phy/rockchip/Kconfig | 23 ++
> drivers/phy/rockchip/Makefile | 3 +
> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
> drivers/phy/samsung/Kconfig | 87 +++++
> drivers/phy/samsung/Makefile | 10 +
> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
> drivers/phy/st/Kconfig | 51 +++
> drivers/phy/st/Makefile | 6 +
> drivers/phy/{ => st}/phy-miphy28lp.c | 0
> drivers/phy/{ => st}/phy-miphy365x.c | 0
> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
> drivers/phy/{ => st}/phy-stih407-usb.c | 0
> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
> drivers/phy/sunxi/Kconfig | 28 ++
> drivers/phy/sunxi/Makefile | 2 +
> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
> drivers/phy/ti/Kconfig | 67 ++++
> drivers/phy/ti/Makefile | 6 +
> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
> drivers/phy/{ => ti}/phy-omap-control.c | 0
> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
> drivers/phy/{ => ti}/phy-tusb1210.c | 0
> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
> drivers/phy/{ => ti}/ulpi_phy.h | 0
> 71 files changed, 464 insertions(+), 416 deletions(-)
> create mode 100644 drivers/phy/bcom/Kconfig
> create mode 100644 drivers/phy/bcom/Makefile
> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
> create mode 100644 drivers/phy/hisi/Kconfig
> create mode 100644 drivers/phy/hisi/Makefile
> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
> create mode 100644 drivers/phy/marvell/Kconfig
> create mode 100644 drivers/phy/marvell/Makefile
> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
> create mode 100644 drivers/phy/qcom/Kconfig
> create mode 100644 drivers/phy/qcom/Makefile
> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
> create mode 100644 drivers/phy/rcar/Kconfig
> create mode 100644 drivers/phy/rcar/Makefile
> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
> create mode 100644 drivers/phy/rockchip/Kconfig
> create mode 100644 drivers/phy/rockchip/Makefile
> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
> create mode 100644 drivers/phy/samsung/Kconfig
> create mode 100644 drivers/phy/samsung/Makefile
> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
> create mode 100644 drivers/phy/st/Kconfig
> create mode 100644 drivers/phy/st/Makefile
> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
> create mode 100644 drivers/phy/sunxi/Kconfig
> create mode 100644 drivers/phy/sunxi/Makefile
> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
> create mode 100644 drivers/phy/ti/Kconfig
> create mode 100644 drivers/phy/ti/Makefile
> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..80c8c68 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -15,45 +15,6 @@ config GENERIC_PHY
> phy users can obtain reference to the PHY. All the users of this
> framework should select this config.
>
> -config PHY_BERLIN_USB
> - tristate "Marvell Berlin USB PHY Driver"
> - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the USB PHY on Marvell Berlin SoCs.
> -
> -config PHY_BERLIN_SATA
> - tristate "Marvell Berlin SATA PHY driver"
> - depends on ARCH_BERLIN && HAS_IOMEM && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the SATA PHY on Marvell Berlin SoCs.
> -
> -config ARMADA375_USBCLUSTER_PHY
> - def_bool y
> - depends on MACH_ARMADA_375 || COMPILE_TEST
> - depends on OF && HAS_IOMEM
> - select GENERIC_PHY
> -
> -config PHY_DM816X_USB
> - tristate "TI dm816x USB PHY driver"
> - depends on ARCH_OMAP2PLUS
> - depends on USB_SUPPORT
> - select GENERIC_PHY
> - select USB_PHY
> - help
> - Enable this for dm816x USB to work.
> -
> -config PHY_EXYNOS_MIPI_VIDEO
> - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> - depends on HAS_IOMEM
> - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> - select GENERIC_PHY
> - default y if ARCH_S5PV210 || ARCH_EXYNOS
> - help
> - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
> - and EXYNOS SoCs.
> -
> config PHY_LPC18XX_USB_OTG
> tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
> depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
> @@ -65,154 +26,6 @@ config PHY_LPC18XX_USB_OTG
> This driver is need for USB0 support on LPC18xx/43xx and takes
> care of enabling and clock setup.
>
> -config PHY_PXA_28NM_HSIC
> - tristate "Marvell USB HSIC 28nm PHY Driver"
> - depends on HAS_IOMEM
> - select GENERIC_PHY
> - help
> - Enable this to support Marvell USB HSIC PHY driver for Marvell
> - SoC. This driver will do the PHY initialization and shutdown.
> - The PHY driver will be used by Marvell ehci driver.
> -
> - To compile this driver as a module, choose M here.
> -
> -config PHY_PXA_28NM_USB2
> - tristate "Marvell USB 2.0 28nm PHY Driver"
> - depends on HAS_IOMEM
> - select GENERIC_PHY
> - help
> - Enable this to support Marvell USB 2.0 PHY driver for Marvell
> - SoC. This driver will do the PHY initialization and shutdown.
> - The PHY driver will be used by Marvell udc/ehci/otg driver.
> -
> - To compile this driver as a module, choose M here.
> -
> -config PHY_MVEBU_SATA
> - def_bool y
> - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
> - depends on OF
> - select GENERIC_PHY
> -
> -config PHY_MIPHY28LP
> - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
> - depends on ARCH_STI
> - select GENERIC_PHY
> - help
> - Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
> - that is part of STMicroelectronics STiH407 SoC.
> -
> -config PHY_MIPHY365X
> - tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
> - depends on ARCH_STI
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - help
> - Enable this to support the miphy transceiver (for SATA/PCIE)
> - that is part of STMicroelectronics STiH41x SoC series.
> -
> -config PHY_RCAR_GEN2
> - tristate "Renesas R-Car generation 2 USB PHY driver"
> - depends on ARCH_SHMOBILE
> - depends on GENERIC_PHY
> - help
> - Support for USB PHY found on Renesas R-Car generation 2 SoCs.
> -
> -config PHY_RCAR_GEN3_USB2
> - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> - depends on OF && ARCH_SHMOBILE
> - select GENERIC_PHY
> - help
> - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
> -
> -config OMAP_CONTROL_PHY
> - tristate "OMAP CONTROL PHY Driver"
> - depends on ARCH_OMAP2PLUS || COMPILE_TEST
> - help
> - Enable this to add support for the PHY part present in the control
> - module. This driver has API to power on the USB2 PHY and to write to
> - the mailbox. The mailbox is present only in omap4 and the register to
> - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
> - additional register to power on USB3 PHY/SATA PHY/PCIE PHY
> - (PIPE3 PHY).
> -
> -config OMAP_USB2
> - tristate "OMAP USB2 PHY Driver"
> - depends on ARCH_OMAP2PLUS
> - depends on USB_SUPPORT
> - select GENERIC_PHY
> - select USB_PHY
> - select OMAP_CONTROL_PHY
> - depends on OMAP_OCP2SCP
> - help
> - Enable this to support the transceiver that is part of SOC. This
> - driver takes care of all the PHY functionality apart from comparator.
> - The USB OTG controller communicates with the comparator using this
> - driver.
> -
> -config TI_PIPE3
> - tristate "TI PIPE3 PHY Driver"
> - depends on ARCH_OMAP2PLUS || COMPILE_TEST
> - select GENERIC_PHY
> - select OMAP_CONTROL_PHY
> - depends on OMAP_OCP2SCP
> - help
> - Enable this to support the PIPE3 PHY that is part of TI SOCs. This
> - driver takes care of all the PHY functionality apart from comparator.
> - This driver interacts with the "OMAP Control PHY Driver" to power
> - on/off the PHY.
> -
> -config TWL4030_USB
> - tristate "TWL4030 USB Transceiver Driver"
> - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> - depends on USB_SUPPORT
> - select GENERIC_PHY
> - select USB_PHY
> - help
> - Enable this to support the USB OTG transceiver on TWL4030
> - family chips (including the TWL5030 and TPS659x0 devices).
> - This transceiver supports high and full speed devices plus,
> - in host mode, low speed.
> -
> -config PHY_EXYNOS_DP_VIDEO
> - tristate "EXYNOS SoC series Display Port PHY driver"
> - depends on OF
> - depends on ARCH_EXYNOS || COMPILE_TEST
> - default ARCH_EXYNOS
> - select GENERIC_PHY
> - help
> - Support for Display Port PHY found on Samsung EXYNOS SoCs.
> -
> -config BCM_KONA_USB2_PHY
> - tristate "Broadcom Kona USB2 PHY Driver"
> - depends on HAS_IOMEM
> - select GENERIC_PHY
> - help
> - Enable this to support the Broadcom Kona USB 2.0 PHY.
> -
> -config PHY_EXYNOS5250_SATA
> - tristate "Exynos5250 Sata SerDes/PHY driver"
> - depends on SOC_EXYNOS5250
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - select I2C
> - select I2C_S3C2410
> - select MFD_SYSCON
> - help
> - Enable this to support SATA SerDes/Phy found on Samsung's
> - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> - port to accept one SATA device.
> -
> -config PHY_HIX5HD2_SATA
> - tristate "HIX5HD2 SATA PHY Driver"
> - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
> - select GENERIC_PHY
> - select MFD_SYSCON
> - help
> - Support for SATA PHY on Hisilicon hix5hd2 Soc.
> -
> config PHY_MT65XX_USB3
> tristate "Mediatek USB3.0 PHY Driver"
> depends on ARCH_MEDIATEK && OF
> @@ -222,93 +35,6 @@ config PHY_MT65XX_USB3
> for mt65xx SoCs. it supports two usb2.0 ports and
> one usb3.0 port.
>
> -config PHY_HI6220_USB
> - tristate "hi6220 USB PHY support"
> - depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> - select GENERIC_PHY
> - select MFD_SYSCON
> - help
> - Enable this to support the HISILICON HI6220 USB PHY.
> -
> - To compile this driver as a module, choose M here.
> -
> -config PHY_SUN4I_USB
> - tristate "Allwinner sunxi SoC USB PHY driver"
> - depends on ARCH_SUNXI && HAS_IOMEM && OF
> - depends on RESET_CONTROLLER
> - depends on EXTCON
> - depends on POWER_SUPPLY
> - select GENERIC_PHY
> - help
> - Enable this to support the transceiver that is part of Allwinner
> - sunxi SoCs.
> -
> - This driver controls the entire USB PHY block, both the USB OTG
> - parts, as well as the 2 regular USB 2 host PHYs.
> -
> -config PHY_SUN9I_USB
> - tristate "Allwinner sun9i SoC USB PHY driver"
> - depends on ARCH_SUNXI && HAS_IOMEM && OF
> - depends on RESET_CONTROLLER
> - depends on USB_COMMON
> - select GENERIC_PHY
> - help
> - Enable this to support the transceiver that is part of Allwinner
> - sun9i SoCs.
> -
> - This driver controls each individual USB 2 host PHY.
> -
> -config PHY_SAMSUNG_USB2
> - tristate "Samsung USB 2.0 PHY driver"
> - depends on HAS_IOMEM
> - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> - select GENERIC_PHY
> - select MFD_SYSCON
> - default ARCH_EXYNOS
> - help
> - Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> - SoCs. This driver provides the interface for USB 2.0 PHY. Support
> - for particular PHYs will be enabled based on the SoC type in addition
> - to this driver.
> -
> -config PHY_S5PV210_USB2
> - bool "Support for S5PV210"
> - depends on PHY_SAMSUNG_USB2
> - depends on ARCH_S5PV210
> - help
> - Enable USB PHY support for S5PV210. This option requires that Samsung
> - USB 2.0 PHY driver is enabled and means that support for this
> - particular SoC is compiled in the driver. In case of S5PV210 two phys
> - are available - device and host.
> -
> -config PHY_EXYNOS4210_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default CPU_EXYNOS4210
> -
> -config PHY_EXYNOS4X12_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
> -
> -config PHY_EXYNOS5250_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default SOC_EXYNOS5250 || SOC_EXYNOS5420
> -
> -config PHY_EXYNOS5_USBDRD
> - tristate "Exynos5 SoC series USB DRD PHY driver"
> - depends on ARCH_EXYNOS && OF
> - depends on HAS_IOMEM
> - depends on USB_DWC3_EXYNOS
> - select GENERIC_PHY
> - select MFD_SYSCON
> - default y
> - help
> - Enable USB DRD PHY support for Exynos 5 SoC series.
> - This driver provides PHY interface for USB 3.0 DRD controller
> - present on Exynos5 SoC series.
> -
> config PHY_PISTACHIO_USB
> tristate "IMG Pistachio USB2.0 PHY driver"
> depends on MACH_PISTACHIO
> @@ -316,55 +42,6 @@ config PHY_PISTACHIO_USB
> help
> Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
>
> -config PHY_QCOM_APQ8064_SATA
> - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
> - depends on ARCH_QCOM
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> -
> -config PHY_QCOM_IPQ806X_SATA
> - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
> - depends on ARCH_QCOM
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> -
> -config PHY_ROCKCHIP_USB
> - tristate "Rockchip USB2 PHY Driver"
> - depends on ARCH_ROCKCHIP && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the Rockchip USB 2.0 PHY.
> -
> -config PHY_ROCKCHIP_EMMC
> - tristate "Rockchip EMMC PHY Driver"
> - depends on ARCH_ROCKCHIP && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the Rockchip EMMC PHY.
> -
> -config PHY_ROCKCHIP_DP
> - tristate "Rockchip Display Port PHY Driver"
> - depends on ARCH_ROCKCHIP && OF
> - select GENERIC_PHY
> - help
> - Enable this to support the Rockchip Display Port PHY.
> -
> -config PHY_ST_SPEAR1310_MIPHY
> - tristate "ST SPEAR1310-MIPHY driver"
> - select GENERIC_PHY
> - depends on MACH_SPEAR1310 || COMPILE_TEST
> - help
> - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
> -
> -config PHY_ST_SPEAR1340_MIPHY
> - tristate "ST SPEAR1340-MIPHY driver"
> - select GENERIC_PHY
> - depends on MACH_SPEAR1340 || COMPILE_TEST
> - help
> - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
> -
> config PHY_XGENE
> tristate "APM X-Gene 15Gbps PHY support"
> depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
> @@ -372,53 +49,20 @@ config PHY_XGENE
> help
> This option enables support for APM X-Gene SoC multi-purpose PHY.
>
> -config PHY_STIH407_USB
> - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
> - depends on RESET_CONTROLLER
> - depends on ARCH_STI || COMPILE_TEST
> - select GENERIC_PHY
> - help
> - Enable this support to enable the picoPHY device used by USB2
> - and USB3 controllers on STMicroelectronics STiH407 SoC families.
> -
> -config PHY_STIH41X_USB
> - tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
> - depends on ARCH_STI
> - select GENERIC_PHY
> - help
> - Enable this to support the USB transceiver that is part of
> - STMicroelectronics STiH41x SoC series.
> -
> -config PHY_QCOM_UFS
> - tristate "Qualcomm UFS PHY driver"
> - depends on OF && ARCH_QCOM
> - select GENERIC_PHY
> - help
> - Support for UFS PHY on QCOM chipsets.
> -
> -config PHY_TUSB1210
> - tristate "TI TUSB1210 ULPI PHY module"
> - depends on USB_ULPI_BUS
> - select GENERIC_PHY
> - help
> - Support for TI TUSB1210 USB ULPI PHY.
> -
> -config PHY_BRCMSTB_SATA
> - tristate "Broadcom STB SATA PHY driver"
> - depends on ARCH_BRCMSTB || BMIPS_GENERIC
> - depends on OF
> - select GENERIC_PHY
> - help
> - Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB
> SoCs. - Likely useful only with CONFIG_SATA_BRCMSTB enabled.
> -
> -config PHY_CYGNUS_PCIE
> - tristate "Broadcom Cygnus PCIe PHY driver"
> - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
> - select GENERIC_PHY
> - default ARCH_BCM_CYGNUS
> - help
> - Enable this to support the Broadcom Cygnus PCIe PHY.
> - If unsure, say N.
> +menuconfig PHY_PLAT
> + bool "Platform Phy drivers"
> +
> +if PHY_PLAT
> +source "drivers/phy/bcom/Kconfig"
> +source "drivers/phy/hisi/Kconfig"
> +source "drivers/phy/marvell/Kconfig"
> +source "drivers/phy/qcom/Kconfig"
> +source "drivers/phy/rcar/Kconfig"
> +source "drivers/phy/rockchip/Kconfig"
> +source "drivers/phy/samsung/Kconfig"
> +source "drivers/phy/st/Kconfig"
> +source "drivers/phy/sunxi/Kconfig"
> +source "drivers/phy/ti/Kconfig"
> +endif
>
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..73d563b 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -3,52 +3,19 @@
> #
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
> -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
> -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
> -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
> -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
> -obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
> -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
> -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
> -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
> -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
> -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
> -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> -phy-exynos-usb2-y += phy-samsung-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
> -obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
> -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
> -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
> -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> -obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> +
> +# Phy drivers for different platforms.
> +obj-$(CONFIG_PHY_PLAT) += bcom/ \
> + hisi/ \
> + marvell/ \
> + qcom/ \
> + rcar/ \
> + rockchip/ \
> + samsung/ \
> + st/ \
> + sunxi/ \
> + ti/
> diff --git a/drivers/phy/bcom/Kconfig b/drivers/phy/bcom/Kconfig
> new file mode 100644
> index 0000000..8243372
> --- /dev/null
> +++ b/drivers/phy/bcom/Kconfig
> @@ -0,0 +1,27 @@
> +#
> +# PHY drivers for Broadcom platforms
> +#
> +config PHY_CYGNUS_PCIE
> + tristate "Broadcom Cygnus PCIe PHY driver"
> + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
> + select GENERIC_PHY
> + default ARCH_BCM_CYGNUS
> + help
> + Enable this to support the Broadcom Cygnus PCIe PHY.
> + If unsure, say N.
> +
> +config BCM_KONA_USB2_PHY
> + tristate "Broadcom Kona USB2 PHY Driver"
> + depends on HAS_IOMEM
> + select GENERIC_PHY
> + help
> + Enable this to support the Broadcom Kona USB 2.0 PHY.
> +
> +config PHY_BRCMSTB_SATA
> + tristate "Broadcom STB SATA PHY driver"
> + depends on ARCH_BRCMSTB || BMIPS_GENERIC
> + depends on OF
> + select GENERIC_PHY
> + help
> + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB
> SoCs. + Likely useful only with CONFIG_SATA_BRCMSTB enabled.
> diff --git a/drivers/phy/bcom/Makefile b/drivers/phy/bcom/Makefile
> new file mode 100644
> index 0000000..f30fa76
> --- /dev/null
> +++ b/drivers/phy/bcom/Makefile
> @@ -0,0 +1,3 @@
> +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> +obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c
> b/drivers/phy/bcom/phy-bcm-cygnus-pcie.c similarity index 100%
> rename from drivers/phy/phy-bcm-cygnus-pcie.c
> rename to drivers/phy/bcom/phy-bcm-cygnus-pcie.c
> diff --git a/drivers/phy/phy-bcm-kona-usb2.c
> b/drivers/phy/bcom/phy-bcm-kona-usb2.c similarity index 100%
> rename from drivers/phy/phy-bcm-kona-usb2.c
> rename to drivers/phy/bcom/phy-bcm-kona-usb2.c
> diff --git a/drivers/phy/phy-brcmstb-sata.c
> b/drivers/phy/bcom/phy-brcmstb-sata.c similarity index 100%
> rename from drivers/phy/phy-brcmstb-sata.c
> rename to drivers/phy/bcom/phy-brcmstb-sata.c
> diff --git a/drivers/phy/hisi/Kconfig b/drivers/phy/hisi/Kconfig
> new file mode 100644
> index 0000000..affa9ed
> --- /dev/null
> +++ b/drivers/phy/hisi/Kconfig
> @@ -0,0 +1,20 @@
> +#
> +# PHY drivers for HiSilicon platforms
> +#
> +config PHY_HIX5HD2_SATA
> + tristate "HIX5HD2 SATA PHY Driver"
> + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Support for SATA PHY on Hisilicon hix5hd2 Soc.
> +
> +config PHY_HI6220_USB
> + tristate "hi6220 USB PHY support"
> + depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Enable this to support the HISILICON HI6220 USB PHY.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/hisi/Makefile b/drivers/phy/hisi/Makefile
> new file mode 100644
> index 0000000..6059ed8
> --- /dev/null
> +++ b/drivers/phy/hisi/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> diff --git a/drivers/phy/phy-hi6220-usb.c
> b/drivers/phy/hisi/phy-hi6220-usb.c similarity index 100%
> rename from drivers/phy/phy-hi6220-usb.c
> rename to drivers/phy/hisi/phy-hi6220-usb.c
> diff --git a/drivers/phy/phy-hix5hd2-sata.c
> b/drivers/phy/hisi/phy-hix5hd2-sata.c similarity index 100%
> rename from drivers/phy/phy-hix5hd2-sata.c
> rename to drivers/phy/hisi/phy-hix5hd2-sata.c
> diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
> new file mode 100644
> index 0000000..6c1576c
> --- /dev/null
> +++ b/drivers/phy/marvell/Kconfig
> @@ -0,0 +1,50 @@
> +#
> +# PHY drivers for Marvell platforms
> +#
> +config ARMADA375_USBCLUSTER_PHY
> + def_bool y
> + depends on MACH_ARMADA_375 || COMPILE_TEST
> + depends on OF && HAS_IOMEM
> + select GENERIC_PHY
> +
> +config PHY_BERLIN_USB
> + tristate "Marvell Berlin USB PHY Driver"
> + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the USB PHY on Marvell Berlin SoCs.
> +
> +config PHY_BERLIN_SATA
> + tristate "Marvell Berlin SATA PHY driver"
> + depends on ARCH_BERLIN && HAS_IOMEM && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the SATA PHY on Marvell Berlin SoCs.
> +
> +config PHY_MVEBU_SATA
> + def_bool y
> + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
> + depends on OF
> + select GENERIC_PHY
> +
> +config PHY_PXA_28NM_HSIC
> + tristate "Marvell USB HSIC 28nm PHY Driver"
> + depends on HAS_IOMEM
> + select GENERIC_PHY
> + help
> + Enable this to support Marvell USB HSIC PHY driver for Marvell
> + SoC. This driver will do the PHY initialization and shutdown.
> + The PHY driver will be used by Marvell ehci driver.
> +
> + To compile this driver as a module, choose M here.
> +
> +config PHY_PXA_28NM_USB2
> + tristate "Marvell USB 2.0 28nm PHY Driver"
> + depends on HAS_IOMEM
> + select GENERIC_PHY
> + help
> + Enable this to support Marvell USB 2.0 PHY driver for Marvell
> + SoC. This driver will do the PHY initialization and shutdown.
> + The PHY driver will be used by Marvell udc/ehci/otg driver.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
> new file mode 100644
> index 0000000..f4fa255
> --- /dev/null
> +++ b/drivers/phy/marvell/Makefile
> @@ -0,0 +1,6 @@
> +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
> +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
> +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
> diff --git a/drivers/phy/phy-armada375-usb2.c
> b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100%
> rename from drivers/phy/phy-armada375-usb2.c
> rename to drivers/phy/marvell/phy-armada375-usb2.c
> diff --git a/drivers/phy/phy-berlin-sata.c
> b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100%
> rename from drivers/phy/phy-berlin-sata.c
> rename to drivers/phy/marvell/phy-berlin-sata.c
> diff --git a/drivers/phy/phy-berlin-usb.c
> b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100%
> rename from drivers/phy/phy-berlin-usb.c
> rename to drivers/phy/marvell/phy-berlin-usb.c
> diff --git a/drivers/phy/phy-mvebu-sata.c
> b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100%
> rename from drivers/phy/phy-mvebu-sata.c
> rename to drivers/phy/marvell/phy-mvebu-sata.c
> diff --git a/drivers/phy/phy-pxa-28nm-hsic.c
> b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100%
> rename from drivers/phy/phy-pxa-28nm-hsic.c
> rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c
> diff --git a/drivers/phy/phy-pxa-28nm-usb2.c
> b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100%
> rename from drivers/phy/phy-pxa-28nm-usb2.c
> rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c
> diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
> new file mode 100644
> index 0000000..9718d01
> --- /dev/null
> +++ b/drivers/phy/qcom/Kconfig
> @@ -0,0 +1,23 @@
> +#
> +# PHY drivers for Qualcomm platforms
> +#
> +config PHY_QCOM_APQ8064_SATA
> + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
> + depends on ARCH_QCOM
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> +
> +config PHY_QCOM_IPQ806X_SATA
> + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
> + depends on ARCH_QCOM
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> +
> +config PHY_QCOM_UFS
> + tristate "Qualcomm UFS PHY driver"
> + depends on OF && ARCH_QCOM
> + select GENERIC_PHY
> + help
> + Support for UFS PHY on QCOM chipsets.
> diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
> new file mode 100644
> index 0000000..2db3e77
> --- /dev/null
> +++ b/drivers/phy/qcom/Makefile
> @@ -0,0 +1,5 @@
> +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o \
> + += phy-qcom-ufs-qmp-20nm.o \
> + += phy-qcom-ufs-qmp-14nm.o
> diff --git a/drivers/phy/phy-qcom-apq8064-sata.c
> b/drivers/phy/qcom/phy-qcom-apq8064-sata.c similarity index 100%
> rename from drivers/phy/phy-qcom-apq8064-sata.c
> rename to drivers/phy/qcom/phy-qcom-apq8064-sata.c
> diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c
> b/drivers/phy/qcom/phy-qcom-ipq806x-sata.c similarity index 100%
> rename from drivers/phy/phy-qcom-ipq806x-sata.c
> rename to drivers/phy/qcom/phy-qcom-ipq806x-sata.c
> diff --git a/drivers/phy/phy-qcom-ufs-i.h
> b/drivers/phy/qcom/phy-qcom-ufs-i.h similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-i.h
> rename to drivers/phy/qcom/phy-qcom-ufs-i.h
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.c
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-14nm.h
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.c
> diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h
> b/drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h similarity index 100%
> rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h
> rename to drivers/phy/qcom/phy-qcom-ufs-qmp-20nm.h
> diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qcom/phy-qcom-ufs.c
> similarity index 100%
> rename from drivers/phy/phy-qcom-ufs.c
> rename to drivers/phy/qcom/phy-qcom-ufs.c
> diff --git a/drivers/phy/rcar/Kconfig b/drivers/phy/rcar/Kconfig
> new file mode 100644
> index 0000000..169b5e2
> --- /dev/null
> +++ b/drivers/phy/rcar/Kconfig
> @@ -0,0 +1,16 @@
> +#
> +# PHY drivers for Renesas's r-car platforms
> +#
> +config PHY_RCAR_GEN2
> + tristate "Renesas R-Car generation 2 USB PHY driver"
> + depends on ARCH_SHMOBILE
> + depends on GENERIC_PHY
> + help
> + Support for USB PHY found on Renesas R-Car generation 2 SoCs.
> +
> +config PHY_RCAR_GEN3_USB2
> + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> + depends on OF && ARCH_SHMOBILE
> + select GENERIC_PHY
> + help
> + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
> diff --git a/drivers/phy/rcar/Makefile b/drivers/phy/rcar/Makefile
> new file mode 100644
> index 0000000..695241a
> --- /dev/null
> +++ b/drivers/phy/rcar/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
> +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
> diff --git a/drivers/phy/phy-rcar-gen2.c
> b/drivers/phy/rcar/phy-rcar-gen2.c similarity index 100%
> rename from drivers/phy/phy-rcar-gen2.c
> rename to drivers/phy/rcar/phy-rcar-gen2.c
> diff --git a/drivers/phy/phy-rcar-gen3-usb2.c
> b/drivers/phy/rcar/phy-rcar-gen3-usb2.c similarity index 100%
> rename from drivers/phy/phy-rcar-gen3-usb2.c
> rename to drivers/phy/rcar/phy-rcar-gen3-usb2.c
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> new file mode 100644
> index 0000000..c575d1e
> --- /dev/null
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -0,0 +1,23 @@
> +#
> +# PHY drivers for Rockchip platforms
> +#
> +config PHY_ROCKCHIP_USB
> + tristate "Rockchip USB2 PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip USB 2.0 PHY.
> +
> +config PHY_ROCKCHIP_EMMC
> + tristate "Rockchip EMMC PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip EMMC PHY.
> +
> +config PHY_ROCKCHIP_DP
> + tristate "Rockchip Display Port PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip Display Port PHY.
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> new file mode 100644
> index 0000000..c15acc1
> --- /dev/null
> +++ b/drivers/phy/rockchip/Makefile
> @@ -0,0 +1,3 @@
> +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> diff --git a/drivers/phy/phy-rockchip-dp.c
> b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100%
> rename from drivers/phy/phy-rockchip-dp.c
> rename to drivers/phy/rockchip/phy-rockchip-dp.c
> diff --git a/drivers/phy/phy-rockchip-emmc.c
> b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100%
> rename from drivers/phy/phy-rockchip-emmc.c
> rename to drivers/phy/rockchip/phy-rockchip-emmc.c
> diff --git a/drivers/phy/phy-rockchip-usb.c
> b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100%
> rename from drivers/phy/phy-rockchip-usb.c
> rename to drivers/phy/rockchip/phy-rockchip-usb.c
> diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> new file mode 100644
> index 0000000..80bdea7
> --- /dev/null
> +++ b/drivers/phy/samsung/Kconfig
> @@ -0,0 +1,87 @@
> +#
> +# PHY drivers for Samsung platforms
> +#
> +config PHY_SAMSUNG_USB2
> + tristate "Samsung USB 2.0 PHY driver"
> + depends on HAS_IOMEM
> + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> + select GENERIC_PHY
> + select MFD_SYSCON
> + default ARCH_EXYNOS
> + help
> + Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> + SoCs. This driver provides the interface for USB 2.0 PHY. Support
> + for particular PHYs will be enabled based on the SoC type in addition
> + to this driver.
> +
> +config PHY_S5PV210_USB2
> + bool "Support for S5PV210"
> + depends on PHY_SAMSUNG_USB2
> + depends on ARCH_S5PV210
> + help
> + Enable USB PHY support for S5PV210. This option requires that Samsung
> + USB 2.0 PHY driver is enabled and means that support for this
> + particular SoC is compiled in the driver. In case of S5PV210 two phys
> + are available - device and host.
> +
> +config PHY_EXYNOS4210_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default CPU_EXYNOS4210
> +
> +config PHY_EXYNOS4X12_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
> +
> +config PHY_EXYNOS5250_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default SOC_EXYNOS5250 || SOC_EXYNOS5420
> +
> +config PHY_EXYNOS5_USBDRD
> + tristate "Exynos5 SoC series USB DRD PHY driver"
> + depends on ARCH_EXYNOS && OF
> + depends on HAS_IOMEM
> + depends on USB_DWC3_EXYNOS
> + select GENERIC_PHY
> + select MFD_SYSCON
> + default y
> + help
> + Enable USB DRD PHY support for Exynos 5 SoC series.
> + This driver provides PHY interface for USB 3.0 DRD controller
> + present on Exynos5 SoC series.
> +
> +config PHY_EXYNOS_DP_VIDEO
> + tristate "EXYNOS SoC series Display Port PHY driver"
> + depends on OF
> + depends on ARCH_EXYNOS || COMPILE_TEST
> + default ARCH_EXYNOS
> + select GENERIC_PHY
> + help
> + Support for Display Port PHY found on Samsung EXYNOS SoCs.
> +
> +config PHY_EXYNOS_MIPI_VIDEO
> + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> + depends on HAS_IOMEM
> + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> + select GENERIC_PHY
> + default y if ARCH_S5PV210 || ARCH_EXYNOS
> + help
> + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
> + and EXYNOS SoCs.
> +
> +config PHY_EXYNOS5250_SATA
> + tristate "Exynos5250 Sata SerDes/PHY driver"
> + depends on SOC_EXYNOS5250
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + select I2C
> + select I2C_S3C2410
> + select MFD_SYSCON
> + help
> + Enable this to support SATA SerDes/Phy found on Samsung's
> + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> + port to accept one SATA device.
> diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
> new file mode 100644
> index 0000000..585dbd7
> --- /dev/null
> +++ b/drivers/phy/samsung/Makefile
> @@ -0,0 +1,10 @@
> +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> +phy-exynos-usb2-y += phy-samsung-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> diff --git a/drivers/phy/phy-exynos-dp-video.c
> b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100%
> rename from drivers/phy/phy-exynos-dp-video.c
> rename to drivers/phy/samsung/phy-exynos-dp-video.c
> diff --git a/drivers/phy/phy-exynos-mipi-video.c
> b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100%
> rename from drivers/phy/phy-exynos-mipi-video.c
> rename to drivers/phy/samsung/phy-exynos-mipi-video.c
> diff --git a/drivers/phy/phy-exynos4210-usb2.c
> b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100%
> rename from drivers/phy/phy-exynos4210-usb2.c
> rename to drivers/phy/samsung/phy-exynos4210-usb2.c
> diff --git a/drivers/phy/phy-exynos4x12-usb2.c
> b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100%
> rename from drivers/phy/phy-exynos4x12-usb2.c
> rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c
> b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100%
> rename from drivers/phy/phy-exynos5-usbdrd.c
> rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
> diff --git a/drivers/phy/phy-exynos5250-sata.c
> b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100%
> rename from drivers/phy/phy-exynos5250-sata.c
> rename to drivers/phy/samsung/phy-exynos5250-sata.c
> diff --git a/drivers/phy/phy-exynos5250-usb2.c
> b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100%
> rename from drivers/phy/phy-exynos5250-usb2.c
> rename to drivers/phy/samsung/phy-exynos5250-usb2.c
> diff --git a/drivers/phy/phy-s5pv210-usb2.c
> b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100%
> rename from drivers/phy/phy-s5pv210-usb2.c
> rename to drivers/phy/samsung/phy-s5pv210-usb2.c
> diff --git a/drivers/phy/phy-samsung-usb2.c
> b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100%
> rename from drivers/phy/phy-samsung-usb2.c
> rename to drivers/phy/samsung/phy-samsung-usb2.c
> diff --git a/drivers/phy/phy-samsung-usb2.h
> b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100%
> rename from drivers/phy/phy-samsung-usb2.h
> rename to drivers/phy/samsung/phy-samsung-usb2.h
> diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
> new file mode 100644
> index 0000000..651b2bf
> --- /dev/null
> +++ b/drivers/phy/st/Kconfig
> @@ -0,0 +1,51 @@
> +#
> +# PHY drivers for ST Micro platforms
> +#
> +config PHY_MIPHY28LP
> + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
> + depends on ARCH_STI
> + select GENERIC_PHY
> + help
> + Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
> + that is part of STMicroelectronics STiH407 SoC.
> +
> +config PHY_MIPHY365X
> + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
> + depends on ARCH_STI
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + help
> + Enable this to support the miphy transceiver (for SATA/PCIE)
> + that is part of STMicroelectronics STiH41x SoC series.
> +
> +config PHY_ST_SPEAR1310_MIPHY
> + tristate "ST SPEAR1310-MIPHY driver"
> + select GENERIC_PHY
> + depends on MACH_SPEAR1310 || COMPILE_TEST
> + help
> + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
> +
> +config PHY_ST_SPEAR1340_MIPHY
> + tristate "ST SPEAR1340-MIPHY driver"
> + select GENERIC_PHY
> + depends on MACH_SPEAR1340 || COMPILE_TEST
> + help
> + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
> +
> +config PHY_STIH407_USB
> + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
> + depends on RESET_CONTROLLER
> + depends on ARCH_STI || COMPILE_TEST
> + select GENERIC_PHY
> + help
> + Enable this support to enable the picoPHY device used by USB2
> + and USB3 controllers on STMicroelectronics STiH407 SoC families.
> +
> +config PHY_STIH41X_USB
> + tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
> + depends on ARCH_STI
> + select GENERIC_PHY
> + help
> + Enable this to support the USB transceiver that is part of
> + STMicroelectronics STiH41x SoC series.
> diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
> new file mode 100644
> index 0000000..907561b
> --- /dev/null
> +++ b/drivers/phy/st/Makefile
> @@ -0,0 +1,6 @@
> +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
> +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
> +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
> +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
> diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
> similarity index 100%
> rename from drivers/phy/phy-miphy28lp.c
> rename to drivers/phy/st/phy-miphy28lp.c
> diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/st/phy-miphy365x.c
> similarity index 100%
> rename from drivers/phy/phy-miphy365x.c
> rename to drivers/phy/st/phy-miphy365x.c
> diff --git a/drivers/phy/phy-spear1310-miphy.c
> b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100%
> rename from drivers/phy/phy-spear1310-miphy.c
> rename to drivers/phy/st/phy-spear1310-miphy.c
> diff --git a/drivers/phy/phy-spear1340-miphy.c
> b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100%
> rename from drivers/phy/phy-spear1340-miphy.c
> rename to drivers/phy/st/phy-spear1340-miphy.c
> diff --git a/drivers/phy/phy-stih407-usb.c
> b/drivers/phy/st/phy-stih407-usb.c similarity index 100%
> rename from drivers/phy/phy-stih407-usb.c
> rename to drivers/phy/st/phy-stih407-usb.c
> diff --git a/drivers/phy/phy-stih41x-usb.c
> b/drivers/phy/st/phy-stih41x-usb.c similarity index 100%
> rename from drivers/phy/phy-stih41x-usb.c
> rename to drivers/phy/st/phy-stih41x-usb.c
> diff --git a/drivers/phy/sunxi/Kconfig b/drivers/phy/sunxi/Kconfig
> new file mode 100644
> index 0000000..eb06427
> --- /dev/null
> +++ b/drivers/phy/sunxi/Kconfig
> @@ -0,0 +1,28 @@
> +#
> +# PHY drivers for Allwinner's sunxi platforms
> +#
> +config PHY_SUN4I_USB
> + tristate "Allwinner sunxi SoC USB PHY driver"
> + depends on ARCH_SUNXI && HAS_IOMEM && OF
> + depends on RESET_CONTROLLER
> + depends on EXTCON
> + depends on POWER_SUPPLY
> + select GENERIC_PHY
> + help
> + Enable this to support the transceiver that is part of Allwinner
> + sunxi SoCs.
> +
> + This driver controls the entire USB PHY block, both the USB OTG
> + parts, as well as the 2 regular USB 2 host PHYs.
> +
> +config PHY_SUN9I_USB
> + tristate "Allwinner sun9i SoC USB PHY driver"
> + depends on ARCH_SUNXI && HAS_IOMEM && OF
> + depends on RESET_CONTROLLER
> + depends on USB_COMMON
> + select GENERIC_PHY
> + help
> + Enable this to support the transceiver that is part of Allwinner
> + sun9i SoCs.
> +
> + This driver controls each individual USB 2 host PHY.
> diff --git a/drivers/phy/sunxi/Makefile b/drivers/phy/sunxi/Makefile
> new file mode 100644
> index 0000000..8605529c
> --- /dev/null
> +++ b/drivers/phy/sunxi/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> diff --git a/drivers/phy/phy-sun4i-usb.c
> b/drivers/phy/sunxi/phy-sun4i-usb.c similarity index 100%
> rename from drivers/phy/phy-sun4i-usb.c
> rename to drivers/phy/sunxi/phy-sun4i-usb.c
> diff --git a/drivers/phy/phy-sun9i-usb.c
> b/drivers/phy/sunxi/phy-sun9i-usb.c similarity index 100%
> rename from drivers/phy/phy-sun9i-usb.c
> rename to drivers/phy/sunxi/phy-sun9i-usb.c
> diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
> new file mode 100644
> index 0000000..1e3e307
> --- /dev/null
> +++ b/drivers/phy/ti/Kconfig
> @@ -0,0 +1,67 @@
> +#
> +# PHY drivers for TI platforms
> +#
> +config PHY_DM816X_USB
> + tristate "TI dm816x USB PHY driver"
> + depends on ARCH_OMAP2PLUS
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + help
> + Enable this for dm816x USB to work.
> +
> +config OMAP_CONTROL_PHY
> + tristate "OMAP CONTROL PHY Driver"
> + depends on ARCH_OMAP2PLUS || COMPILE_TEST
> + help
> + Enable this to add support for the PHY part present in the control
> + module. This driver has API to power on the USB2 PHY and to write to
> + the mailbox. The mailbox is present only in omap4 and the register to
> + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
> + additional register to power on USB3 PHY/SATA PHY/PCIE PHY
> + (PIPE3 PHY).
> +
> +config OMAP_USB2
> + tristate "OMAP USB2 PHY Driver"
> + depends on ARCH_OMAP2PLUS
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + select OMAP_CONTROL_PHY
> + depends on OMAP_OCP2SCP
> + help
> + Enable this to support the transceiver that is part of SOC. This
> + driver takes care of all the PHY functionality apart from comparator.
> + The USB OTG controller communicates with the comparator using this
> + driver.
> +
> +config TI_PIPE3
> + tristate "TI PIPE3 PHY Driver"
> + depends on ARCH_OMAP2PLUS || COMPILE_TEST
> + select GENERIC_PHY
> + select OMAP_CONTROL_PHY
> + depends on OMAP_OCP2SCP
> + help
> + Enable this to support the PIPE3 PHY that is part of TI SOCs. This
> + driver takes care of all the PHY functionality apart from comparator.
> + This driver interacts with the "OMAP Control PHY Driver" to power
> + on/off the PHY.
> +
> +config PHY_TUSB1210
> + tristate "TI TUSB1210 ULPI PHY module"
> + depends on USB_ULPI_BUS
> + select GENERIC_PHY
> + help
> + Support for TI TUSB1210 USB ULPI PHY.
> +
> +config TWL4030_USB
> + tristate "TWL4030 USB Transceiver Driver"
> + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> + depends on USB_SUPPORT
> + select GENERIC_PHY
> + select USB_PHY
> + help
> + Enable this to support the USB OTG transceiver on TWL4030
> + family chips (including the TWL5030 and TPS659x0 devices).
> + This transceiver supports high and full speed devices plus,
> + in host mode, low speed.
> diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
> new file mode 100644
> index 0000000..2d16f77
> --- /dev/null
> +++ b/drivers/phy/ti/Makefile
> @@ -0,0 +1,6 @@
> +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
> +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
> +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> diff --git a/drivers/phy/phy-dm816x-usb.c
> b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100%
> rename from drivers/phy/phy-dm816x-usb.c
> rename to drivers/phy/ti/phy-dm816x-usb.c
> diff --git a/drivers/phy/phy-omap-control.c
> b/drivers/phy/ti/phy-omap-control.c similarity index 100%
> rename from drivers/phy/phy-omap-control.c
> rename to drivers/phy/ti/phy-omap-control.c
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-omap-usb2.c
> rename to drivers/phy/ti/phy-omap-usb2.c
> diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
> similarity index 100%
> rename from drivers/phy/phy-ti-pipe3.c
> rename to drivers/phy/ti/phy-ti-pipe3.c
> diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
> similarity index 100%
> rename from drivers/phy/phy-tusb1210.c
> rename to drivers/phy/ti/phy-tusb1210.c
> diff --git a/drivers/phy/phy-twl4030-usb.c
> b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100%
> rename from drivers/phy/phy-twl4030-usb.c
> rename to drivers/phy/ti/phy-twl4030-usb.c
> diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ti/ulpi_phy.h
> similarity index 100%
> rename from drivers/phy/ulpi_phy.h
> rename to drivers/phy/ti/ulpi_phy.h

2016-04-01 15:31:56

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi Vivek,

[auto build test ERROR on rockchip/for-next]
[also build test ERROR on v4.6-rc1 next-20160401]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url: https://github.com/0day-ci/linux/commits/Vivek-Gautam/phy-Group-vendor-specific-phy-drivers/20160401-192920
base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
config: arm-allyesconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm

All errors (new ones prefixed by >>):

>> make[4]: *** No rule to make target 'drivers/phy/qcom/+=', needed by 'drivers/phy/qcom/built-in.o'.
make[4]: Target '__build' not remade because of errors.

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation


Attachments:
(No filename) (1.05 kB)
.config.gz (54.92 kB)
Download all attachments

2016-04-03 06:05:37

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote:
> Adding vendor specific directories in phy to group
> phy drivers under their respective vendor umbrella.
>
> Signed-off-by: Vivek Gautam <[email protected]>
> ---
>
> With growing number of phy drivers, it makes sense to
> group these drivers under their respective vendor/platform
> umbrella directory.
>
> Build-tested 'multi_v7_defconfig'.

Please update also the MAINTAINERS file. For many entires the path won't
match anymore.

Best regards,
Krzysztof

2016-04-05 04:52:08

by Vivek Gautam

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi Krzysztof,


On Sat, Apr 2, 2016 at 11:05 PM, Krzysztof Kozlowski
<[email protected]> wrote:
> On Fri, Apr 01, 2016 at 04:59:15PM +0530, Vivek Gautam wrote:
>> Adding vendor specific directories in phy to group
>> phy drivers under their respective vendor umbrella.
>>
>> Signed-off-by: Vivek Gautam <[email protected]>
>> ---
>>
>> With growing number of phy drivers, it makes sense to
>> group these drivers under their respective vendor/platform
>> umbrella directory.
>>
>> Build-tested 'multi_v7_defconfig'.
>
> Please update also the MAINTAINERS file. For many entires the path won't
> match anymore.

Thanks for pointing out. I will update the MAINTAINERS file as well.

>
> Best regards,
> Krzysztof
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html



--
Best Regards
Vivek Gautam
Samsung, India

2016-04-05 04:54:30

by Vivek Gautam

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

On Fri, Apr 1, 2016 at 8:31 AM, kbuild test robot <[email protected]> wrote:
> Hi Vivek,
>
> [auto build test ERROR on rockchip/for-next]
> [also build test ERROR on v4.6-rc1 next-20160401]
> [if your patch is applied to the wrong git tree, please drop us a note to help improving the system]
>
> url: https://github.com/0day-ci/linux/commits/Vivek-Gautam/phy-Group-vendor-specific-phy-drivers/20160401-192920
> base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next
> config: arm-allyesconfig (attached as .config)
> reproduce:
> wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> make.cross ARCH=arm
>
> All errors (new ones prefixed by >>):
>
>>> make[4]: *** No rule to make target 'drivers/phy/qcom/+=', needed by 'drivers/phy/qcom/built-in.o'.
> make[4]: Target '__build' not remade because of errors.

will fix this.

>
> ---
> 0-DAY kernel test infrastructure Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all Intel Corporation


--
Best Regards
Vivek Gautam
Samsung, India

2016-04-06 12:52:59

by Kishon Vijay Abraham I

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi,

On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote:
> Hi,
>
>
> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <[email protected]> wrote:
>> Hi,
>>
>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>>> Adding vendor specific directories in phy to group
>>> phy drivers under their respective vendor umbrella.
>>>
>>> Signed-off-by: Vivek Gautam <[email protected]>
>>> ---
>>>
>>> With growing number of phy drivers, it makes sense to
>>> group these drivers under their respective vendor/platform
>>> umbrella directory.
>>>
>>> Build-tested 'multi_v7_defconfig'.
>>>
>>> drivers/phy/Kconfig | 386 +---------------------
>>> drivers/phy/Makefile | 57 +---
>>> drivers/phy/bcom/Kconfig | 27 ++
>>> drivers/phy/bcom/Makefile | 3 +
>>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
>>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
>>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
>>> drivers/phy/hisi/Kconfig | 20 ++
>>> drivers/phy/hisi/Makefile | 2 +
>>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
>>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
>>> drivers/phy/marvell/Kconfig | 50 +++
>>> drivers/phy/marvell/Makefile | 6 +
>>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
>>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
>>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
>>> drivers/phy/qcom/Kconfig | 23 ++
>>> drivers/phy/qcom/Makefile | 5 +
>>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
>>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
>>> drivers/phy/rcar/Kconfig | 16 +
>>> drivers/phy/rcar/Makefile | 2 +
>>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
>>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
>>> drivers/phy/rockchip/Kconfig | 23 ++
>>> drivers/phy/rockchip/Makefile | 3 +
>>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
>>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
>>> drivers/phy/samsung/Kconfig | 87 +++++
>>> drivers/phy/samsung/Makefile | 10 +
>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>> drivers/phy/st/Kconfig | 51 +++
>>> drivers/phy/st/Makefile | 6 +
>>> drivers/phy/{ => st}/phy-miphy28lp.c | 0
>>> drivers/phy/{ => st}/phy-miphy365x.c | 0
>>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>>> drivers/phy/{ => st}/phy-stih407-usb.c | 0
>>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
>>> drivers/phy/sunxi/Kconfig | 28 ++
>>> drivers/phy/sunxi/Makefile | 2 +
>>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
>>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
>>> drivers/phy/ti/Kconfig | 67 ++++
>>> drivers/phy/ti/Makefile | 6 +
>>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
>>> drivers/phy/{ => ti}/phy-omap-control.c | 0
>>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
>>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
>>> drivers/phy/{ => ti}/phy-tusb1210.c | 0
>>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
>>> drivers/phy/{ => ti}/ulpi_phy.h | 0
>>
>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
>> driver.
>
> Yes, you are right. But i was hesitant to add a multi-level header
> file include in the phy driver
> which uses it.
>
> Does it makes sense to move this ulpi_phy.h to include/linux/phy ?

yeah.. that should be okay.
>
>>> 71 files changed, 464 insertions(+), 416 deletions(-)
>>> create mode 100644 drivers/phy/bcom/Kconfig
>>> create mode 100644 drivers/phy/bcom/Makefile
>>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>>> create mode 100644 drivers/phy/hisi/Kconfig
>>> create mode 100644 drivers/phy/hisi/Makefile
>>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>>> create mode 100644 drivers/phy/marvell/Kconfig
>>> create mode 100644 drivers/phy/marvell/Makefile
>>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>>> create mode 100644 drivers/phy/qcom/Kconfig
>>> create mode 100644 drivers/phy/qcom/Makefile
>>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>>> create mode 100644 drivers/phy/rcar/Kconfig
>>> create mode 100644 drivers/phy/rcar/Makefile
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>>> create mode 100644 drivers/phy/rockchip/Kconfig
>>> create mode 100644 drivers/phy/rockchip/Makefile
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>>> create mode 100644 drivers/phy/samsung/Kconfig
>>> create mode 100644 drivers/phy/samsung/Makefile
>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>> create mode 100644 drivers/phy/st/Kconfig
>>> create mode 100644 drivers/phy/st/Makefile
>>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>>> create mode 100644 drivers/phy/sunxi/Kconfig
>>> create mode 100644 drivers/phy/sunxi/Makefile
>>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>>> create mode 100644 drivers/phy/ti/Kconfig
>>> create mode 100644 drivers/phy/ti/Makefile
>>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index 26566db..80c8c68 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>>> phy users can obtain reference to the PHY. All the users of this
>>> framework should select this config.
>>>
>>
>>> +menuconfig PHY_PLAT
>>> + bool "Platform Phy drivers"
>>
>> Not really convinced about adding a new config here. This will create new
>> dependencies and will also start breaking users of oldconfig.
>
> This serves including all the directory paths in the 'make' for
> driver/phy/Makefile.
>
> Otherwise each directory will have to be built as per particular platform
> And, not all drivers of a vendor are built for one-kind of platform,
> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
> Similarly, Broadcom phy drivers are based on multiple platforms, and so
> does Marvell's.
>
> Please suggest a concise way to include the vendor directories in the build path
> in drivers/phy/Makefile.

obj-y += vendor/?

-Kishon

>
>>
>> Also not all of them are platform drivers (e.g ULPI PHY drivers).
> I Think this applies to ulpi_phy only at this moment, which we can resolve
> by moving that to include/linux path.
>
>>
>> Thanks
>> Kishon
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>

2016-04-06 13:48:05

by Vivek Gautam

[permalink] [raw]
Subject: Re: [PATCH 1/2] phy: Group vendor specific phy drivers

Hi Kishon,


On Wed, Apr 6, 2016 at 5:51 AM, Kishon Vijay Abraham I <[email protected]> wrote:
> Hi,
>
> On Friday 01 April 2016 07:05 PM, Vivek Gautam wrote:
>> Hi,
>>
>>
>> On Fri, Apr 1, 2016 at 6:05 AM, Kishon Vijay Abraham I <[email protected]> wrote:
>>> Hi,
>>>
>>> On Friday 01 April 2016 04:59 PM, Vivek Gautam wrote:
>>>> Adding vendor specific directories in phy to group
>>>> phy drivers under their respective vendor umbrella.
>>>>
>>>> Signed-off-by: Vivek Gautam <[email protected]>
>>>> ---
>>>>
>>>> With growing number of phy drivers, it makes sense to
>>>> group these drivers under their respective vendor/platform
>>>> umbrella directory.
>>>>
>>>> Build-tested 'multi_v7_defconfig'.
>>>>
>>>> drivers/phy/Kconfig | 386 +---------------------
>>>> drivers/phy/Makefile | 57 +---
>>>> drivers/phy/bcom/Kconfig | 27 ++
>>>> drivers/phy/bcom/Makefile | 3 +
>>>> drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c | 0
>>>> drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c | 0
>>>> drivers/phy/{ => bcom}/phy-brcmstb-sata.c | 0
>>>> drivers/phy/hisi/Kconfig | 20 ++
>>>> drivers/phy/hisi/Makefile | 2 +
>>>> drivers/phy/{ => hisi}/phy-hi6220-usb.c | 0
>>>> drivers/phy/{ => hisi}/phy-hix5hd2-sata.c | 0
>>>> drivers/phy/marvell/Kconfig | 50 +++
>>>> drivers/phy/marvell/Makefile | 6 +
>>>> drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0
>>>> drivers/phy/{ => marvell}/phy-berlin-sata.c | 0
>>>> drivers/phy/{ => marvell}/phy-berlin-usb.c | 0
>>>> drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0
>>>> drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0
>>>> drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0
>>>> drivers/phy/qcom/Kconfig | 23 ++
>>>> drivers/phy/qcom/Makefile | 5 +
>>>> drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ufs-i.h | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h | 0
>>>> drivers/phy/{ => qcom}/phy-qcom-ufs.c | 0
>>>> drivers/phy/rcar/Kconfig | 16 +
>>>> drivers/phy/rcar/Makefile | 2 +
>>>> drivers/phy/{ => rcar}/phy-rcar-gen2.c | 0
>>>> drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c | 0
>>>> drivers/phy/rockchip/Kconfig | 23 ++
>>>> drivers/phy/rockchip/Makefile | 3 +
>>>> drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0
>>>> drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0
>>>> drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0
>>>> drivers/phy/samsung/Kconfig | 87 +++++
>>>> drivers/phy/samsung/Makefile | 10 +
>>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>>> drivers/phy/st/Kconfig | 51 +++
>>>> drivers/phy/st/Makefile | 6 +
>>>> drivers/phy/{ => st}/phy-miphy28lp.c | 0
>>>> drivers/phy/{ => st}/phy-miphy365x.c | 0
>>>> drivers/phy/{ => st}/phy-spear1310-miphy.c | 0
>>>> drivers/phy/{ => st}/phy-spear1340-miphy.c | 0
>>>> drivers/phy/{ => st}/phy-stih407-usb.c | 0
>>>> drivers/phy/{ => st}/phy-stih41x-usb.c | 0
>>>> drivers/phy/sunxi/Kconfig | 28 ++
>>>> drivers/phy/sunxi/Makefile | 2 +
>>>> drivers/phy/{ => sunxi}/phy-sun4i-usb.c | 0
>>>> drivers/phy/{ => sunxi}/phy-sun9i-usb.c | 0
>>>> drivers/phy/ti/Kconfig | 67 ++++
>>>> drivers/phy/ti/Makefile | 6 +
>>>> drivers/phy/{ => ti}/phy-dm816x-usb.c | 0
>>>> drivers/phy/{ => ti}/phy-omap-control.c | 0
>>>> drivers/phy/{ => ti}/phy-omap-usb2.c | 0
>>>> drivers/phy/{ => ti}/phy-ti-pipe3.c | 0
>>>> drivers/phy/{ => ti}/phy-tusb1210.c | 0
>>>> drivers/phy/{ => ti}/phy-twl4030-usb.c | 0
>>>> drivers/phy/{ => ti}/ulpi_phy.h | 0
>>>
>>> ulpi_phy.h is not specific to TI though at this point tusb1210 is the only ULPI
>>> driver.
>>
>> Yes, you are right. But i was hesitant to add a multi-level header
>> file include in the phy driver
>> which uses it.
>>
>> Does it makes sense to move this ulpi_phy.h to include/linux/phy ?
>
> yeah.. that should be okay.
Alright, i will move this file there then.

>>
>>>> 71 files changed, 464 insertions(+), 416 deletions(-)
>>>> create mode 100644 drivers/phy/bcom/Kconfig
>>>> create mode 100644 drivers/phy/bcom/Makefile
>>>> rename drivers/phy/{ => bcom}/phy-bcm-cygnus-pcie.c (100%)
>>>> rename drivers/phy/{ => bcom}/phy-bcm-kona-usb2.c (100%)
>>>> rename drivers/phy/{ => bcom}/phy-brcmstb-sata.c (100%)
>>>> create mode 100644 drivers/phy/hisi/Kconfig
>>>> create mode 100644 drivers/phy/hisi/Makefile
>>>> rename drivers/phy/{ => hisi}/phy-hi6220-usb.c (100%)
>>>> rename drivers/phy/{ => hisi}/phy-hix5hd2-sata.c (100%)
>>>> create mode 100644 drivers/phy/marvell/Kconfig
>>>> create mode 100644 drivers/phy/marvell/Makefile
>>>> rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%)
>>>> rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%)
>>>> rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%)
>>>> rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%)
>>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%)
>>>> rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%)
>>>> create mode 100644 drivers/phy/qcom/Kconfig
>>>> create mode 100644 drivers/phy/qcom/Makefile
>>>> rename drivers/phy/{ => qcom}/phy-qcom-apq8064-sata.c (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ipq806x-sata.c (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-i.h (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.c (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-14nm.h (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.c (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs-qmp-20nm.h (100%)
>>>> rename drivers/phy/{ => qcom}/phy-qcom-ufs.c (100%)
>>>> create mode 100644 drivers/phy/rcar/Kconfig
>>>> create mode 100644 drivers/phy/rcar/Makefile
>>>> rename drivers/phy/{ => rcar}/phy-rcar-gen2.c (100%)
>>>> rename drivers/phy/{ => rcar}/phy-rcar-gen3-usb2.c (100%)
>>>> create mode 100644 drivers/phy/rockchip/Kconfig
>>>> create mode 100644 drivers/phy/rockchip/Makefile
>>>> rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%)
>>>> rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%)
>>>> rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%)
>>>> create mode 100644 drivers/phy/samsung/Kconfig
>>>> create mode 100644 drivers/phy/samsung/Makefile
>>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>>> create mode 100644 drivers/phy/st/Kconfig
>>>> create mode 100644 drivers/phy/st/Makefile
>>>> rename drivers/phy/{ => st}/phy-miphy28lp.c (100%)
>>>> rename drivers/phy/{ => st}/phy-miphy365x.c (100%)
>>>> rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%)
>>>> rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%)
>>>> rename drivers/phy/{ => st}/phy-stih407-usb.c (100%)
>>>> rename drivers/phy/{ => st}/phy-stih41x-usb.c (100%)
>>>> create mode 100644 drivers/phy/sunxi/Kconfig
>>>> create mode 100644 drivers/phy/sunxi/Makefile
>>>> rename drivers/phy/{ => sunxi}/phy-sun4i-usb.c (100%)
>>>> rename drivers/phy/{ => sunxi}/phy-sun9i-usb.c (100%)
>>>> create mode 100644 drivers/phy/ti/Kconfig
>>>> create mode 100644 drivers/phy/ti/Makefile
>>>> rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%)
>>>> rename drivers/phy/{ => ti}/phy-omap-control.c (100%)
>>>> rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%)
>>>> rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%)
>>>> rename drivers/phy/{ => ti}/phy-tusb1210.c (100%)
>>>> rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%)
>>>> rename drivers/phy/{ => ti}/ulpi_phy.h (100%)
>>>>
>>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>>> index 26566db..80c8c68 100644
>>>> --- a/drivers/phy/Kconfig
>>>> +++ b/drivers/phy/Kconfig
>>>> @@ -15,45 +15,6 @@ config GENERIC_PHY
>>>> phy users can obtain reference to the PHY. All the users of this
>>>> framework should select this config.
>>>>
>>>
>>>> +menuconfig PHY_PLAT
>>>> + bool "Platform Phy drivers"
>>>
>>> Not really convinced about adding a new config here. This will create new
>>> dependencies and will also start breaking users of oldconfig.
>>
>> This serves including all the directory paths in the 'make' for
>> driver/phy/Makefile.
>>
>> Otherwise each directory will have to be built as per particular platform
>> And, not all drivers of a vendor are built for one-kind of platform,
>> for example, Samsung uses ARCH_EXYNOS, as well as ARCH_S5PV210
>> Similarly, Broadcom phy drivers are based on multiple platforms, and so
>> does Marvell's.
>>
>> Please suggest a concise way to include the vendor directories in the build path
>> in drivers/phy/Makefile.
>
> obj-y += vendor/?

Yea, correct. Thanks
Will respin the patch with all the comments.

>
> -Kishon
>
>>
>>>
>>> Also not all of them are platform drivers (e.g ULPI PHY drivers).
>> I Think this applies to ulpi_phy only at this moment, which we can resolve
>> by moving that to include/linux path.
>>
>>>
>>> Thanks
>>> Kishon
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>>> the body of a message to [email protected]
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>>



--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India