This patch set aims to improve logging in seccomp by:
1) Empowering administrators to be able to permit or quiet logging of
specific seccomp actions
2) Allowing applications to request logging of all actions, except for
RET_ALLOW, in the filter being loaded (subject to the
administrator's wishes in #1)
3) By making it possible for application developers to request logging
of specific syscalls while developing filters for their application
(subject to the administrator's wishes in #1)
With this patch set applied, the logic for deciding if an action will be
logged is as described in the commit message of the final patch.
* Changes since v5:
- Rebase onto
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/?h=seccomp/kill_process
(kees)
+ Redefine the value of SECCOMP_FILTER_FLAG_LOG to account for the
new SECCOMP_FILTER_FLAG_KILL_PROCESS
+ Add SECCOMP_FILTER_FLAG_KILL_PROCESS to the
detect_seccomp_filter_flags selftest
- Reorder patches to move SECCOMP_GET_ACTION_AVAIL patch behind
actions_avail sysctl patch (kees)
- Reorder patches to move the selftest to detect filter flag support
before the patch that adds SECCOMP_FILTER_FLAG_LOG (kees)
- Add psuedo code showing the high level logic of when and when not to
log to the commit message of each patch that changes the logging
behavior (inspired by kees)
- Add Suggested-by to the SECCOMP_GET_ACTION_AVAIL patch to credit
Andy for the idea (tyhicks)
- Use sizeof(seccomp_actions_avail), instead of strlen(), to avoid
variable length "names" array in seccomp_actions_logged_handler()
(smatch)
- Only check the actions_logged sysctl value for "kill" when first
introducing the actions_logged sysctl since filters cannot yet set
the FILTER_FLAG_LOG flag (kees)
- Mention how the actions_logged sysctl could quiet SECCOMP_RET_LOG
actions in seccomp_filter.rst documentation (kees)
Tyler
This patch creates a read-only sysctl containing an ordered list of
seccomp actions that the kernel supports. The ordering, from left to
right, is the lowest action value (kill) to the highest action value
(allow). Currently, a read of the sysctl file would return "kill trap
errno trace allow". The contents of this sysctl file can be useful for
userspace code as well as the system administrator.
The path to the sysctl is:
/proc/sys/kernel/seccomp/actions_avail
libseccomp and other userspace code can easily determine which actions
the current kernel supports. The set of actions supported by the current
kernel may be different than the set of action macros found in kernel
headers that were installed where the userspace code was built.
In addition, this sysctl will allow system administrators to know which
actions are supported by the kernel and make it easier to configure
exactly what seccomp logs through the audit subsystem. Support for this
level of logging configuration will come in a future patch.
Signed-off-by: Tyler Hicks <[email protected]>
---
Documentation/sysctl/kernel.txt | 1 +
Documentation/userspace-api/seccomp_filter.rst | 16 ++++++++
kernel/seccomp.c | 51 ++++++++++++++++++++++++++
3 files changed, 68 insertions(+)
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index bac23c1..995c42c 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -74,6 +74,7 @@ show up in /proc/sys/kernel:
- reboot-cmd [ SPARC only ]
- rtsig-max
- rtsig-nr
+- seccomp/ ==> Documentation/userspace-api/seccomp_filter.rst
- sem
- sem_next_id [ sysv ipc ]
- sg-big-buff [ generic SCSI device (sg) ]
diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst
index f71eb5e..35fc7cb 100644
--- a/Documentation/userspace-api/seccomp_filter.rst
+++ b/Documentation/userspace-api/seccomp_filter.rst
@@ -169,7 +169,23 @@ The ``samples/seccomp/`` directory contains both an x86-specific example
and a more generic example of a higher level macro interface for BPF
program generation.
+Sysctls
+=======
+
+Seccomp's sysctl files can be found in the ``/proc/sys/kernel/seccomp/``
+directory. Here's a description of each file in that directory:
+
+``actions_avail``:
+ A read-only ordered list of seccomp return values (refer to the
+ ``SECCOMP_RET_*`` macros above) in string form. The ordering, from
+ left-to-right, is the least permissive return value to the most
+ permissive return value.
+ The list represents the set of seccomp return values supported
+ by the kernel. A userspace program may use this list to
+ determine if the actions found in the ``seccomp.h``, when the
+ program was built, differs from the set of actions actually
+ supported in the current running kernel.
Adding architecture support
===========================
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 6a196d1..ee77eb3 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -17,11 +17,13 @@
#include <linux/audit.h>
#include <linux/compat.h>
#include <linux/coredump.h>
+#include <linux/kmemleak.h>
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/seccomp.h>
#include <linux/slab.h>
#include <linux/syscalls.h>
+#include <linux/sysctl.h>
#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
#include <asm/syscall.h>
@@ -980,3 +982,52 @@ long seccomp_get_filter(struct task_struct *task, unsigned long filter_off,
return ret;
}
#endif
+
+#ifdef CONFIG_SYSCTL
+
+/* Human readable action names for friendly sysctl interaction */
+#define SECCOMP_RET_KILL_NAME "kill"
+#define SECCOMP_RET_TRAP_NAME "trap"
+#define SECCOMP_RET_ERRNO_NAME "errno"
+#define SECCOMP_RET_TRACE_NAME "trace"
+#define SECCOMP_RET_ALLOW_NAME "allow"
+
+static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " "
+ SECCOMP_RET_TRAP_NAME " "
+ SECCOMP_RET_ERRNO_NAME " "
+ SECCOMP_RET_TRACE_NAME " "
+ SECCOMP_RET_ALLOW_NAME;
+
+static struct ctl_path seccomp_sysctl_path[] = {
+ { .procname = "kernel", },
+ { .procname = "seccomp", },
+ { }
+};
+
+static struct ctl_table seccomp_sysctl_table[] = {
+ {
+ .procname = "actions_avail",
+ .data = (void *) &seccomp_actions_avail,
+ .maxlen = sizeof(seccomp_actions_avail),
+ .mode = 0444,
+ .proc_handler = proc_dostring,
+ },
+ { }
+};
+
+static int __init seccomp_sysctl_init(void)
+{
+ struct ctl_table_header *hdr;
+
+ hdr = register_sysctl_paths(seccomp_sysctl_path, seccomp_sysctl_table);
+ if (!hdr)
+ pr_warn("seccomp: sysctl registration failed\n");
+ else
+ kmemleak_not_leak(hdr);
+
+ return 0;
+}
+
+device_initcall(seccomp_sysctl_init)
+
+#endif /* CONFIG_SYSCTL */
--
2.7.4
Userspace code that needs to check if the kernel supports a given action
may not be able to use the /proc/sys/kernel/seccomp/actions_avail
sysctl. The process may be running in a sandbox and, therefore,
sufficient filesystem access may not be available. This patch adds an
operation to the seccomp(2) syscall that allows userspace code to ask
the kernel if a given action is available.
If the action is supported by the kernel, 0 is returned. If the action
is not supported by the kernel, -1 is returned with errno set to
-EOPNOTSUPP. If this check is attempted on a kernel that doesn't support
this new operation, -1 is returned with errno set to -EINVAL meaning
that userspace code will have the ability to differentiate between the
two error cases.
Signed-off-by: Tyler Hicks <[email protected]>
Suggested-by: Andy Lutomirski <[email protected]>
---
include/uapi/linux/seccomp.h | 5 ++--
kernel/seccomp.c | 26 +++++++++++++++++++
tools/testing/selftests/seccomp/seccomp_bpf.c | 36 +++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
index 4b75d8c..95d20d2 100644
--- a/include/uapi/linux/seccomp.h
+++ b/include/uapi/linux/seccomp.h
@@ -11,8 +11,9 @@
#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */
/* Valid operations for seccomp syscall. */
-#define SECCOMP_SET_MODE_STRICT 0
-#define SECCOMP_SET_MODE_FILTER 1
+#define SECCOMP_SET_MODE_STRICT 0
+#define SECCOMP_SET_MODE_FILTER 1
+#define SECCOMP_GET_ACTION_AVAIL 2
/* Valid flags for SECCOMP_SET_MODE_FILTER */
#define SECCOMP_FILTER_FLAG_TSYNC 1
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index ee77eb3..1e57eff 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -854,6 +854,27 @@ static inline long seccomp_set_mode_filter(unsigned int flags,
}
#endif
+static long seccomp_get_action_avail(const char __user *uaction)
+{
+ u32 action;
+
+ if (copy_from_user(&action, uaction, sizeof(action)))
+ return -EFAULT;
+
+ switch (action) {
+ case SECCOMP_RET_KILL:
+ case SECCOMP_RET_TRAP:
+ case SECCOMP_RET_ERRNO:
+ case SECCOMP_RET_TRACE:
+ case SECCOMP_RET_ALLOW:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
/* Common entry point for both prctl and syscall. */
static long do_seccomp(unsigned int op, unsigned int flags,
const char __user *uargs)
@@ -865,6 +886,11 @@ static long do_seccomp(unsigned int op, unsigned int flags,
return seccomp_set_mode_strict();
case SECCOMP_SET_MODE_FILTER:
return seccomp_set_mode_filter(flags, uargs);
+ case SECCOMP_GET_ACTION_AVAIL:
+ if (flags != 0)
+ return -EINVAL;
+
+ return seccomp_get_action_avail(uargs);
default:
return -EINVAL;
}
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 92f2779..d3a78ec 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -116,6 +116,10 @@ struct seccomp_data {
#define SECCOMP_SET_MODE_FILTER 1
#endif
+#ifndef SECCOMP_GET_ACTION_AVAIL
+#define SECCOMP_GET_ACTION_AVAIL 2
+#endif
+
#ifndef SECCOMP_FILTER_FLAG_TSYNC
#define SECCOMP_FILTER_FLAG_TSYNC 1
#endif
@@ -2552,6 +2556,38 @@ TEST(syscall_restart)
_metadata->passed = 0;
}
+TEST(get_action_avail)
+{
+ __u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP,
+ SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE,
+ SECCOMP_RET_ALLOW };
+ __u32 unknown_action = 0x10000000U;
+ int i;
+ long ret;
+
+ ret = seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &actions[0]);
+ ASSERT_NE(ENOSYS, errno) {
+ TH_LOG("Kernel does not support seccomp syscall!");
+ }
+ ASSERT_NE(EINVAL, errno) {
+ TH_LOG("Kernel does not support SECCOMP_GET_ACTION_AVAIL operation!");
+ }
+ EXPECT_EQ(ret, 0);
+
+ for (i = 0; i < ARRAY_SIZE(actions); i++) {
+ ret = seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &actions[i]);
+ EXPECT_EQ(ret, 0) {
+ TH_LOG("Expected action (0x%X) not available!",
+ actions[i]);
+ }
+ }
+
+ /* Check that an unknown action is handled properly (EOPNOTSUPP) */
+ ret = seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &unknown_action);
+ EXPECT_EQ(ret, -1);
+ EXPECT_EQ(errno, EOPNOTSUPP);
+}
+
/*
* TODO:
* - add microbenchmarks
--
2.7.4
Adminstrators can write to this sysctl to set the seccomp actions that
are allowed to be logged. Any actions not found in this sysctl will not
be logged.
For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and
SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were
written to the sysctl. SECCOMP_RET_TRACE actions would not be logged
since its string representation ("trace") wasn't present in the sysctl
value.
The path to the sysctl is:
/proc/sys/kernel/seccomp/actions_logged
The actions_avail sysctl can be read to discover the valid action names
that can be written to the actions_logged sysctl with the exception of
"allow". SECCOMP_RET_ALLOW actions cannot be configured for logging.
The default setting for the sysctl is to allow all actions to be logged
except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are
currently logged, an upcoming patch will allow applications to request
additional actions to be logged.
There's one important exception to this sysctl. If a task is
specifically being audited, meaning that an audit context has been
allocated for the task, seccomp will log all actions other than
SECCOMP_RET_ALLOW despite the value of actions_logged. This exception
preserves the existing auditing behavior of tasks with an allocated
audit context.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if audit_enabled && task-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <[email protected]>
---
Documentation/userspace-api/seccomp_filter.rst | 18 +++
include/linux/audit.h | 6 +-
kernel/seccomp.c | 171 ++++++++++++++++++++++++-
3 files changed, 187 insertions(+), 8 deletions(-)
diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst
index 35fc7cb..2d1d8ab 100644
--- a/Documentation/userspace-api/seccomp_filter.rst
+++ b/Documentation/userspace-api/seccomp_filter.rst
@@ -187,6 +187,24 @@ directory. Here's a description of each file in that directory:
program was built, differs from the set of actions actually
supported in the current running kernel.
+``actions_logged``:
+ A read-write ordered list of seccomp return values (refer to the
+ ``SECCOMP_RET_*`` macros above) that are allowed to be logged. Writes
+ to the file do not need to be in ordered form but reads from the file
+ will be ordered in the same way as the actions_avail sysctl.
+
+ It is important to note that the value of ``actions_logged`` does not
+ prevent certain actions from being logged when the audit subsystem is
+ configured to audit a task. If the action is not found in
+ ``actions_logged`` list, the final decision on whether to audit the
+ action for that task is ultimately left up to the audit subsystem to
+ decide for all seccomp return values other than ``SECCOMP_RET_ALLOW``.
+
+ The ``allow`` string is not accepted in the ``actions_logged`` sysctl
+ as it is not possible to log ``SECCOMP_RET_ALLOW`` actions. Attempting
+ to write ``allow`` to the sysctl will result in an EINVAL being
+ returned.
+
Adding architecture support
===========================
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 2150bdc..8c30f06 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -314,11 +314,7 @@ void audit_core_dumps(long signr);
static inline void audit_seccomp(unsigned long syscall, long signr, int code)
{
- if (!audit_enabled)
- return;
-
- /* Force a record to be reported if a signal was delivered. */
- if (signr || unlikely(!audit_dummy_context()))
+ if (audit_enabled && unlikely(!audit_dummy_context()))
__audit_seccomp(syscall, signr, code);
}
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 1e57eff..2cb362a 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -545,6 +545,45 @@ static void seccomp_send_sigsys(int syscall, int reason)
}
#endif /* CONFIG_SECCOMP_FILTER */
+/* For use with seccomp_actions_logged */
+#define SECCOMP_LOG_KILL (1 << 0)
+#define SECCOMP_LOG_TRAP (1 << 2)
+#define SECCOMP_LOG_ERRNO (1 << 3)
+#define SECCOMP_LOG_TRACE (1 << 4)
+#define SECCOMP_LOG_ALLOW (1 << 5)
+
+static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP |
+ SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE;
+
+static inline void seccomp_log(unsigned long syscall, long signr, u32 action)
+{
+ bool log = false;
+
+ switch (action) {
+ case SECCOMP_RET_ALLOW:
+ case SECCOMP_RET_TRAP:
+ case SECCOMP_RET_ERRNO:
+ case SECCOMP_RET_TRACE:
+ break;
+ case SECCOMP_RET_KILL:
+ default:
+ log = seccomp_actions_logged & SECCOMP_LOG_KILL;
+ }
+
+ /*
+ * Force an audit message to be emitted when the action is RET_KILL and
+ * the action is allowed to be logged by the admin.
+ */
+ if (log)
+ return __audit_seccomp(syscall, signr, action);
+
+ /*
+ * Let the audit subsystem decide if the action should be audited based
+ * on whether the current task itself is being audited.
+ */
+ return audit_seccomp(syscall, signr, action);
+}
+
/*
* Secure computing mode 1 allows only read/write/exit/sigreturn.
* To be fully secure this must be combined with rlimit
@@ -570,7 +609,7 @@ static void __secure_computing_strict(int this_syscall)
#ifdef SECCOMP_DEBUG
dump_stack();
#endif
- audit_seccomp(this_syscall, SIGKILL, SECCOMP_RET_KILL);
+ seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL);
do_exit(SIGKILL);
}
@@ -680,7 +719,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
case SECCOMP_RET_KILL:
default:
- audit_seccomp(this_syscall, SIGSYS, action);
+ seccomp_log(this_syscall, SIGSYS, action);
/*
* The only way match can be NULL here is if something
@@ -719,7 +758,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
unreachable();
skip:
- audit_seccomp(this_syscall, 0, action);
+ seccomp_log(this_syscall, 0, action);
return -1;
}
#else
@@ -1024,6 +1063,127 @@ static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " "
SECCOMP_RET_TRACE_NAME " "
SECCOMP_RET_ALLOW_NAME;
+struct seccomp_log_name {
+ u32 log;
+ const char *name;
+};
+
+static const struct seccomp_log_name seccomp_log_names[] = {
+ { SECCOMP_LOG_KILL, SECCOMP_RET_KILL_NAME },
+ { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME },
+ { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME },
+ { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME },
+ { SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME },
+ { }
+};
+
+static bool seccomp_names_from_actions_logged(char *names, size_t size,
+ u32 actions_logged)
+{
+ const struct seccomp_log_name *cur;
+ bool append_space = false;
+
+ for (cur = seccomp_log_names; cur->name && size; cur++) {
+ ssize_t ret;
+
+ if (!(actions_logged & cur->log))
+ continue;
+
+ if (append_space) {
+ ret = strscpy(names, " ", size);
+ if (ret < 0)
+ return false;
+
+ names += ret;
+ size -= ret;
+ } else
+ append_space = true;
+
+ ret = strscpy(names, cur->name, size);
+ if (ret < 0)
+ return false;
+
+ names += ret;
+ size -= ret;
+ }
+
+ return true;
+}
+
+static bool seccomp_action_logged_from_name(u32 *action_logged,
+ const char *name)
+{
+ const struct seccomp_log_name *cur;
+
+ for (cur = seccomp_log_names; cur->name; cur++) {
+ if (!strcmp(cur->name, name)) {
+ *action_logged = cur->log;
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static bool seccomp_actions_logged_from_names(u32 *actions_logged, char *names)
+{
+ char *name;
+
+ *actions_logged = 0;
+ while ((name = strsep(&names, " ")) && *name) {
+ u32 action_logged = 0;
+
+ if (!seccomp_action_logged_from_name(&action_logged, name))
+ return false;
+
+ *actions_logged |= action_logged;
+ }
+
+ return true;
+}
+
+static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ char names[sizeof(seccomp_actions_avail)];
+ struct ctl_table table;
+ int ret;
+
+ if (write && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ memset(names, 0, sizeof(names));
+
+ if (!write) {
+ if (!seccomp_names_from_actions_logged(names, sizeof(names),
+ seccomp_actions_logged))
+ return -EINVAL;
+ }
+
+ table = *ro_table;
+ table.data = names;
+ table.maxlen = sizeof(names);
+ ret = proc_dostring(&table, write, buffer, lenp, ppos);
+ if (ret)
+ return ret;
+
+ if (write) {
+ u32 actions_logged;
+
+ if (!seccomp_actions_logged_from_names(&actions_logged,
+ table.data))
+ return -EINVAL;
+
+ if (actions_logged & SECCOMP_LOG_ALLOW)
+ return -EINVAL;
+
+ seccomp_actions_logged = actions_logged;
+ }
+
+ return 0;
+}
+
static struct ctl_path seccomp_sysctl_path[] = {
{ .procname = "kernel", },
{ .procname = "seccomp", },
@@ -1038,6 +1198,11 @@ static struct ctl_table seccomp_sysctl_table[] = {
.mode = 0444,
.proc_handler = proc_dostring,
},
+ {
+ .procname = "actions_logged",
+ .mode = 0644,
+ .proc_handler = seccomp_actions_logged_handler,
+ },
{ }
};
--
2.7.4
Userspace needs to be able to reliably detect the support of a filter
flag. A good way of doing that is by attempting to enter filter mode,
with the flag bit(s) in question set, and a NULL pointer for the args
parameter of seccomp(2). EFAULT indicates that the flag is valid and
EINVAL indicates that the flag is invalid.
This patch adds a selftest that can be used to test this method of
detection in userspace.
Signed-off-by: Tyler Hicks <[email protected]>
---
tools/testing/selftests/seccomp/seccomp_bpf.c | 59 +++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index d3a78ec..ed4528c 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -1918,6 +1918,65 @@ TEST(seccomp_syscall_mode_lock)
}
}
+/* Test detection of known and unknown filter flags. Userspace needs to be able
+ * to check if a filter flag is supported by the current kernel and a good way
+ * of doing that is by attempting to enter filter mode, with the flag bit in
+ * question set, and a NULL pointer for the _args_ parameter. EFAULT indicates
+ * that the flag is valid and EINVAL indicates that the flag is invalid.
+ */
+TEST(detect_seccomp_filter_flags)
+{
+ unsigned int flags[] = { SECCOMP_FILTER_FLAG_TSYNC,
+ SECCOMP_FILTER_FLAG_KILL_PROCESS };
+ unsigned int flag, all_flags;
+ int i;
+ long ret;
+
+ /* Test detection of known-good filter flags */
+ for (i = 0, all_flags = 0; i < ARRAY_SIZE(flags); i++) {
+ flag = flags[i];
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL);
+ ASSERT_NE(ENOSYS, errno) {
+ TH_LOG("Kernel does not support seccomp syscall!");
+ }
+ EXPECT_EQ(-1, ret);
+ EXPECT_EQ(EFAULT, errno) {
+ TH_LOG("Failed to detect that a known-good filter flag (0x%X) is supported!",
+ flag);
+ }
+
+ all_flags |= flag;
+ }
+
+ /* Test detection of all known-good filter flags */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, all_flags, NULL);
+ EXPECT_EQ(-1, ret);
+ EXPECT_EQ(EFAULT, errno) {
+ TH_LOG("Failed to detect that all known-good filter flags (0x%X) are supported!",
+ all_flags);
+ }
+
+ /* Test detection of an unknown filter flag */
+ flag = -1;
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL);
+ EXPECT_EQ(-1, ret);
+ EXPECT_EQ(EINVAL, errno) {
+ TH_LOG("Failed to detect that an unknown filter flag (0x%X) is unsupported!",
+ flag);
+ }
+
+ /* Test detection of an unknown filter flag that may simply need to be
+ * added to this test
+ */
+ flag = flags[ARRAY_SIZE(flags) - 1] << 1;
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, flag, NULL);
+ EXPECT_EQ(-1, ret);
+ EXPECT_EQ(EINVAL, errno) {
+ TH_LOG("Failed to detect that an unknown filter flag (0x%X) is unsupported! Does a new flag need to be added to this test?",
+ flag);
+ }
+}
+
TEST(TSYNC_first)
{
struct sock_filter filter[] = {
--
2.7.4
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <[email protected]>
---
Documentation/userspace-api/seccomp_filter.rst | 9 +++
include/uapi/linux/seccomp.h | 1 +
kernel/seccomp.c | 23 ++++--
tools/testing/selftests/seccomp/seccomp_bpf.c | 97 +++++++++++++++++++++++++-
4 files changed, 124 insertions(+), 6 deletions(-)
diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst
index 2d1d8ab..f497735 100644
--- a/Documentation/userspace-api/seccomp_filter.rst
+++ b/Documentation/userspace-api/seccomp_filter.rst
@@ -141,6 +141,15 @@ In precedence order, they are:
allow use of ptrace, even of other sandboxed processes, without
extreme care; ptracers can use this mechanism to escape.)
+``SECCOMP_RET_LOG``:
+ Results in the system call being executed after it is logged. This
+ should be used by application developers to learn which syscalls their
+ application needs without having to iterate through multiple test and
+ development cycles to build the list.
+
+ This action will only be logged if "log" is present in the
+ actions_logged sysctl string.
+
``SECCOMP_RET_ALLOW``:
Results in the system call being executed.
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
index 144a101..58a07f4 100644
--- a/include/uapi/linux/seccomp.h
+++ b/include/uapi/linux/seccomp.h
@@ -32,6 +32,7 @@
#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
+#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */
#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
/* Masks for the return value sections. */
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index e9ebaa5..cf841d7 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -556,10 +556,12 @@ static void seccomp_send_sigsys(int syscall, int reason)
#define SECCOMP_LOG_TRAP (1 << 2)
#define SECCOMP_LOG_ERRNO (1 << 3)
#define SECCOMP_LOG_TRACE (1 << 4)
-#define SECCOMP_LOG_ALLOW (1 << 5)
+#define SECCOMP_LOG_LOG (1 << 5)
+#define SECCOMP_LOG_ALLOW (1 << 6)
static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP |
- SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE;
+ SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE |
+ SECCOMP_LOG_LOG;
static inline void seccomp_log(unsigned long syscall, long signr, u32 action,
bool requested)
@@ -578,15 +580,18 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action,
case SECCOMP_RET_TRACE:
log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE;
break;
+ case SECCOMP_RET_LOG:
+ log = seccomp_actions_logged & SECCOMP_LOG_LOG;
+ break;
case SECCOMP_RET_KILL:
default:
log = seccomp_actions_logged & SECCOMP_LOG_KILL;
}
/*
- * Force an audit message to be emitted when the action is RET_KILL or
- * the FILTER_FLAG_LOG bit was set and the action is allowed to be
- * logged by the admin.
+ * Force an audit message to be emitted when the action is RET_KILL,
+ * RET_LOG, or the FILTER_FLAG_LOG bit was set and the action is
+ * allowed to be logged by the admin.
*/
if (log)
return __audit_seccomp(syscall, signr, action);
@@ -723,6 +728,10 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
return 0;
+ case SECCOMP_RET_LOG:
+ seccomp_log(this_syscall, 0, action, true);
+ return 0;
+
case SECCOMP_RET_ALLOW:
/*
* Note that the "match" filter will always be NULL for
@@ -919,6 +928,7 @@ static long seccomp_get_action_avail(const char __user *uaction)
case SECCOMP_RET_TRAP:
case SECCOMP_RET_ERRNO:
case SECCOMP_RET_TRACE:
+ case SECCOMP_RET_LOG:
case SECCOMP_RET_ALLOW:
break;
default:
@@ -1069,12 +1079,14 @@ long seccomp_get_filter(struct task_struct *task, unsigned long filter_off,
#define SECCOMP_RET_TRAP_NAME "trap"
#define SECCOMP_RET_ERRNO_NAME "errno"
#define SECCOMP_RET_TRACE_NAME "trace"
+#define SECCOMP_RET_LOG_NAME "log"
#define SECCOMP_RET_ALLOW_NAME "allow"
static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " "
SECCOMP_RET_TRAP_NAME " "
SECCOMP_RET_ERRNO_NAME " "
SECCOMP_RET_TRACE_NAME " "
+ SECCOMP_RET_LOG_NAME " "
SECCOMP_RET_ALLOW_NAME;
struct seccomp_log_name {
@@ -1087,6 +1099,7 @@ static const struct seccomp_log_name seccomp_log_names[] = {
{ SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME },
{ SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME },
{ SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME },
+ { SECCOMP_LOG_LOG, SECCOMP_RET_LOG_NAME },
{ SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME },
{ }
};
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index fd0fb32..f64c81d2 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -140,6 +140,10 @@ int seccomp(unsigned int op, unsigned int flags, void *args)
}
#endif
+#ifndef SECCOMP_RET_LOG
+#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */
+#endif
+
#if __BYTE_ORDER == __LITTLE_ENDIAN
#define syscall_arg(_n) (offsetof(struct seccomp_data, args[_n]))
#elif __BYTE_ORDER == __BIG_ENDIAN
@@ -395,6 +399,28 @@ TEST(empty_prog)
EXPECT_EQ(EINVAL, errno);
}
+TEST(log_all)
+{
+ struct sock_filter filter[] = {
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_LOG),
+ };
+ struct sock_fprog prog = {
+ .len = (unsigned short)ARRAY_SIZE(filter),
+ .filter = filter,
+ };
+ long ret;
+ pid_t parent = getppid();
+
+ ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
+ ASSERT_EQ(0, ret);
+
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog);
+ ASSERT_EQ(0, ret);
+
+ /* getppid() should succeed and be logged (no check for logging) */
+ EXPECT_EQ(parent, syscall(__NR_getppid));
+}
+
TEST_SIGNAL(unknown_ret_is_kill_inside, SIGSYS)
{
struct sock_filter filter[] = {
@@ -915,6 +941,7 @@ TEST_F(TRAP, handler)
FIXTURE_DATA(precedence) {
struct sock_fprog allow;
+ struct sock_fprog log;
struct sock_fprog trace;
struct sock_fprog error;
struct sock_fprog trap;
@@ -926,6 +953,13 @@ FIXTURE_SETUP(precedence)
struct sock_filter allow_insns[] = {
BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW),
};
+ struct sock_filter log_insns[] = {
+ BPF_STMT(BPF_LD|BPF_W|BPF_ABS,
+ offsetof(struct seccomp_data, nr)),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_getpid, 1, 0),
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW),
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_LOG),
+ };
struct sock_filter trace_insns[] = {
BPF_STMT(BPF_LD|BPF_W|BPF_ABS,
offsetof(struct seccomp_data, nr)),
@@ -962,6 +996,7 @@ FIXTURE_SETUP(precedence)
memcpy(self->_x.filter, &_x##_insns, sizeof(_x##_insns)); \
self->_x.len = (unsigned short)ARRAY_SIZE(_x##_insns)
FILTER_ALLOC(allow);
+ FILTER_ALLOC(log);
FILTER_ALLOC(trace);
FILTER_ALLOC(error);
FILTER_ALLOC(trap);
@@ -972,6 +1007,7 @@ FIXTURE_TEARDOWN(precedence)
{
#define FILTER_FREE(_x) if (self->_x.filter) free(self->_x.filter)
FILTER_FREE(allow);
+ FILTER_FREE(log);
FILTER_FREE(trace);
FILTER_FREE(error);
FILTER_FREE(trap);
@@ -989,6 +1025,8 @@ TEST_F(precedence, allow_ok)
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
@@ -1013,6 +1051,8 @@ TEST_F_SIGNAL(precedence, kill_is_highest, SIGSYS)
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
@@ -1044,6 +1084,8 @@ TEST_F_SIGNAL(precedence, kill_is_highest_in_any_order, SIGSYS)
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trap);
@@ -1065,6 +1107,8 @@ TEST_F_SIGNAL(precedence, trap_is_second, SIGSYS)
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
@@ -1090,6 +1134,8 @@ TEST_F_SIGNAL(precedence, trap_is_second_in_any_order, SIGSYS)
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trap);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
@@ -1111,6 +1157,8 @@ TEST_F(precedence, errno_is_third)
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
@@ -1129,6 +1177,8 @@ TEST_F(precedence, errno_is_third_in_any_order)
ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error);
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
@@ -1151,6 +1201,8 @@ TEST_F(precedence, trace_is_fourth)
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace);
ASSERT_EQ(0, ret);
/* Should work just fine. */
@@ -1172,12 +1224,54 @@ TEST_F(precedence, trace_is_fourth_in_any_order)
ASSERT_EQ(0, ret);
ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
/* Should work just fine. */
EXPECT_EQ(parent, syscall(__NR_getppid));
/* No ptracer */
EXPECT_EQ(-1, syscall(__NR_getpid));
}
+TEST_F(precedence, log_is_fifth)
+{
+ pid_t mypid, parent;
+ long ret;
+
+ mypid = getpid();
+ parent = getppid();
+ ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
+ ASSERT_EQ(0, ret);
+
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
+ ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
+ /* Should work just fine. */
+ EXPECT_EQ(parent, syscall(__NR_getppid));
+ /* Should also work just fine */
+ EXPECT_EQ(mypid, syscall(__NR_getpid));
+}
+
+TEST_F(precedence, log_is_fifth_in_any_order)
+{
+ pid_t mypid, parent;
+ long ret;
+
+ mypid = getpid();
+ parent = getppid();
+ ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
+ ASSERT_EQ(0, ret);
+
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log);
+ ASSERT_EQ(0, ret);
+ ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow);
+ ASSERT_EQ(0, ret);
+ /* Should work just fine. */
+ EXPECT_EQ(parent, syscall(__NR_getppid));
+ /* Should also work just fine */
+ EXPECT_EQ(mypid, syscall(__NR_getpid));
+}
+
#ifndef PTRACE_O_TRACESECCOMP
#define PTRACE_O_TRACESECCOMP 0x00000080
#endif
@@ -2685,7 +2779,7 @@ TEST(get_action_avail)
{
__u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP,
SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE,
- SECCOMP_RET_ALLOW };
+ SECCOMP_RET_LOG, SECCOMP_RET_ALLOW };
__u32 unknown_action = 0x10000000U;
int i;
long ret;
@@ -2722,6 +2816,7 @@ TEST(get_action_avail)
* - 64-bit arg prodding
* - arch value testing (x86 modes especially)
* - verify that FILTER_FLAG_LOG filters generate log messages
+ * - verify that RET_LOG generates log messages
* - ...
*/
--
2.7.4
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 32 and 64 bit
x86, the new log member takes up one byte of an existing three byte hole
in the struct.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <[email protected]>
---
include/linux/seccomp.h | 3 +-
include/uapi/linux/seccomp.h | 1 +
kernel/seccomp.c | 26 +++++++---
tools/testing/selftests/seccomp/seccomp_bpf.c | 69 ++++++++++++++++++++++++++-
4 files changed, 91 insertions(+), 8 deletions(-)
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 59d001b..c881b10 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -4,7 +4,8 @@
#include <uapi/linux/seccomp.h>
#define SECCOMP_FILTER_FLAG_MASK (SECCOMP_FILTER_FLAG_TSYNC | \
- SECCOMP_FILTER_FLAG_KILL_PROCESS)
+ SECCOMP_FILTER_FLAG_KILL_PROCESS | \
+ SECCOMP_FILTER_FLAG_LOG)
#ifdef CONFIG_SECCOMP
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
index 95d20d2..144a101 100644
--- a/include/uapi/linux/seccomp.h
+++ b/include/uapi/linux/seccomp.h
@@ -18,6 +18,7 @@
/* Valid flags for SECCOMP_SET_MODE_FILTER */
#define SECCOMP_FILTER_FLAG_TSYNC 1
#define SECCOMP_FILTER_FLAG_KILL_PROCESS 2
+#define SECCOMP_FILTER_FLAG_LOG 4
/*
* All BPF programs must return a 32-bit value.
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 2cb362a..e9ebaa5 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -44,6 +44,7 @@
* get/put helpers should be used when accessing an instance
* outside of a lifetime-guarded section. In general, this
* is only needed for handling filters shared across tasks.
+ * @log: true if all actions except for SECCOMP_RET_ALLOW should be logged
* @prev: points to a previously installed, or inherited, filter
* @prog: the BPF program to evaluate
* @kill_process: if true, RET_KILL will kill process rather than thread.
@@ -61,6 +62,7 @@
struct seccomp_filter {
refcount_t usage;
bool kill_process;
+ bool log;
struct seccomp_filter *prev;
struct bpf_prog *prog;
};
@@ -475,6 +477,10 @@ static long seccomp_attach_filter(unsigned int flags,
if (flags & SECCOMP_FILTER_FLAG_KILL_PROCESS)
filter->kill_process = true;
+ /* Set log flag, if present. */
+ if (flags & SECCOMP_FILTER_FLAG_LOG)
+ filter->log = true;
+
/*
* If there is an existing filter, make it the prev and don't drop its
* task reference.
@@ -555,15 +561,22 @@ static void seccomp_send_sigsys(int syscall, int reason)
static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP |
SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE;
-static inline void seccomp_log(unsigned long syscall, long signr, u32 action)
+static inline void seccomp_log(unsigned long syscall, long signr, u32 action,
+ bool requested)
{
bool log = false;
switch (action) {
case SECCOMP_RET_ALLOW:
+ break;
case SECCOMP_RET_TRAP:
+ log = requested && seccomp_actions_logged & SECCOMP_LOG_TRAP;
+ break;
case SECCOMP_RET_ERRNO:
+ log = requested && seccomp_actions_logged & SECCOMP_LOG_ERRNO;
+ break;
case SECCOMP_RET_TRACE:
+ log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE;
break;
case SECCOMP_RET_KILL:
default:
@@ -571,8 +584,9 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action)
}
/*
- * Force an audit message to be emitted when the action is RET_KILL and
- * the action is allowed to be logged by the admin.
+ * Force an audit message to be emitted when the action is RET_KILL or
+ * the FILTER_FLAG_LOG bit was set and the action is allowed to be
+ * logged by the admin.
*/
if (log)
return __audit_seccomp(syscall, signr, action);
@@ -609,7 +623,7 @@ static void __secure_computing_strict(int this_syscall)
#ifdef SECCOMP_DEBUG
dump_stack();
#endif
- seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL);
+ seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL, true);
do_exit(SIGKILL);
}
@@ -719,7 +733,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
case SECCOMP_RET_KILL:
default:
- seccomp_log(this_syscall, SIGSYS, action);
+ seccomp_log(this_syscall, SIGSYS, action, true);
/*
* The only way match can be NULL here is if something
@@ -758,7 +772,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd,
unreachable();
skip:
- seccomp_log(this_syscall, 0, action);
+ seccomp_log(this_syscall, 0, action, match ? match->log : false);
return -1;
}
#else
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index ed4528c..fd0fb32 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -128,6 +128,10 @@ struct seccomp_data {
#define SECCOMP_FILTER_FLAG_KILL_PROCESS 2
#endif
+#ifndef SECCOMP_FILTER_FLAG_LOG
+#define SECCOMP_FILTER_FLAG_LOG 4
+#endif
+
#ifndef seccomp
int seccomp(unsigned int op, unsigned int flags, void *args)
{
@@ -1927,7 +1931,8 @@ TEST(seccomp_syscall_mode_lock)
TEST(detect_seccomp_filter_flags)
{
unsigned int flags[] = { SECCOMP_FILTER_FLAG_TSYNC,
- SECCOMP_FILTER_FLAG_KILL_PROCESS };
+ SECCOMP_FILTER_FLAG_KILL_PROCESS,
+ SECCOMP_FILTER_FLAG_LOG };
unsigned int flag, all_flags;
int i;
long ret;
@@ -2615,6 +2620,67 @@ TEST(syscall_restart)
_metadata->passed = 0;
}
+TEST_SIGNAL(filter_flag_log, SIGSYS)
+{
+ struct sock_filter allow_filter[] = {
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW),
+ };
+ struct sock_filter kill_filter[] = {
+ BPF_STMT(BPF_LD|BPF_W|BPF_ABS,
+ offsetof(struct seccomp_data, nr)),
+ BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_getpid, 0, 1),
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_KILL),
+ BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW),
+ };
+ struct sock_fprog allow_prog = {
+ .len = (unsigned short)ARRAY_SIZE(allow_filter),
+ .filter = allow_filter,
+ };
+ struct sock_fprog kill_prog = {
+ .len = (unsigned short)ARRAY_SIZE(kill_filter),
+ .filter = kill_filter,
+ };
+ long ret;
+ pid_t parent = getppid();
+
+ ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
+ ASSERT_EQ(0, ret);
+
+ /* Verify that the FILTER_FLAG_LOG flag isn't accepted in strict mode */
+ ret = seccomp(SECCOMP_SET_MODE_STRICT, SECCOMP_FILTER_FLAG_LOG,
+ &allow_prog);
+ ASSERT_NE(ENOSYS, errno) {
+ TH_LOG("Kernel does not support seccomp syscall!");
+ }
+ EXPECT_NE(0, ret) {
+ TH_LOG("Kernel accepted FILTER_FLAG_LOG flag in strict mode!");
+ }
+ EXPECT_EQ(EINVAL, errno) {
+ TH_LOG("Kernel returned unexpected errno for FILTER_FLAG_LOG flag in strict mode!");
+ }
+
+ /* Verify that a simple, permissive filter can be added with no flags */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, 0, &allow_prog);
+ EXPECT_EQ(0, ret);
+
+ /* See if the same filter can be added with the FILTER_FLAG_LOG flag */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_LOG,
+ &allow_prog);
+ ASSERT_NE(EINVAL, errno) {
+ TH_LOG("Kernel does not support the FILTER_FLAG_LOG flag!");
+ }
+ EXPECT_EQ(0, ret);
+
+ /* Ensure that the kill filter works with the FILTER_FLAG_LOG flag */
+ ret = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_LOG,
+ &kill_prog);
+ EXPECT_EQ(0, ret);
+
+ EXPECT_EQ(parent, syscall(__NR_getppid));
+ /* getpid() should never return. */
+ EXPECT_EQ(0, syscall(__NR_getpid));
+}
+
TEST(get_action_avail)
{
__u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP,
@@ -2655,6 +2721,7 @@ TEST(get_action_avail)
* - endianness checking when appropriate
* - 64-bit arg prodding
* - arch value testing (x86 modes especially)
+ * - verify that FILTER_FLAG_LOG filters generate log messages
* - ...
*/
--
2.7.4
On Thu, Aug 10, 2017 at 9:33 PM, Tyler Hicks <[email protected]> wrote:
> This patch set aims to improve logging in seccomp by:
>
> 1) Empowering administrators to be able to permit or quiet logging of
> specific seccomp actions
> 2) Allowing applications to request logging of all actions, except for
> RET_ALLOW, in the filter being loaded (subject to the
> administrator's wishes in #1)
> 3) By making it possible for application developers to request logging
> of specific syscalls while developing filters for their application
> (subject to the administrator's wishes in #1)
>
> With this patch set applied, the logic for deciding if an action will be
> logged is as described in the commit message of the final patch.
>
> * Changes since v5:
> - Rebase onto
> https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/?h=seccomp/kill_process
> (kees)
> + Redefine the value of SECCOMP_FILTER_FLAG_LOG to account for the
> new SECCOMP_FILTER_FLAG_KILL_PROCESS
> + Add SECCOMP_FILTER_FLAG_KILL_PROCESS to the
> detect_seccomp_filter_flags selftest
> - Reorder patches to move SECCOMP_GET_ACTION_AVAIL patch behind
> actions_avail sysctl patch (kees)
> - Reorder patches to move the selftest to detect filter flag support
> before the patch that adds SECCOMP_FILTER_FLAG_LOG (kees)
> - Add psuedo code showing the high level logic of when and when not to
> log to the commit message of each patch that changes the logging
> behavior (inspired by kees)
> - Add Suggested-by to the SECCOMP_GET_ACTION_AVAIL patch to credit
> Andy for the idea (tyhicks)
> - Use sizeof(seccomp_actions_avail), instead of strlen(), to avoid
> variable length "names" array in seccomp_actions_logged_handler()
> (smatch)
> - Only check the actions_logged sysctl value for "kill" when first
> introducing the actions_logged sysctl since filters cannot yet set
> the FILTER_FLAG_LOG flag (kees)
> - Mention how the actions_logged sysctl could quiet SECCOMP_RET_LOG
> actions in seccomp_filter.rst documentation (kees)
Thanks! This looks good; I made some minor comment style adjustments,
and changed the rebase slightly (as I continue to agonize over how to
do KILL_PROCESS best...)
I'll get this sent to James for -next.
-Kees
--
Kees Cook
Pixel Security
On Thu, Aug 10, 2017 at 9:33 PM, Tyler Hicks <[email protected]> wrote:
> +static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write,
> + void __user *buffer, size_t *lenp,
> + loff_t *ppos)
> +{
> + char names[sizeof(seccomp_actions_avail)];
> + struct ctl_table table;
> + int ret;
> +
> + if (write && !capable(CAP_SYS_ADMIN))
> + return -EPERM;
> +
> + memset(names, 0, sizeof(names));
> +
> + if (!write) {
> + if (!seccomp_names_from_actions_logged(names, sizeof(names),
> + seccomp_actions_logged))
> + return -EINVAL;
> + }
> +
> + table = *ro_table;
> + table.data = names;
> + table.maxlen = sizeof(names);
> + ret = proc_dostring(&table, write, buffer, lenp, ppos);
> + if (ret)
> + return ret;
> +
> + if (write) {
> + u32 actions_logged;
> +
> + if (!seccomp_actions_logged_from_names(&actions_logged,
> + table.data))
> + return -EINVAL;
> +
> + if (actions_logged & SECCOMP_LOG_ALLOW)
> + return -EINVAL;
> +
> + seccomp_actions_logged = actions_logged;
> + }
> +
> + return 0;
> +}
One thought here: should "kill" be always forced on during a write?
This flag effectively cannot be disabled, so listing it (or not) in
the sysctl may be confusing...
-Kees
--
Kees Cook
Pixel Security
On 08/11/2017 02:17 PM, Kees Cook wrote:
> On Thu, Aug 10, 2017 at 9:33 PM, Tyler Hicks <[email protected]> wrote:
>> +static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write,
>> + void __user *buffer, size_t *lenp,
>> + loff_t *ppos)
>> +{
>> + char names[sizeof(seccomp_actions_avail)];
>> + struct ctl_table table;
>> + int ret;
>> +
>> + if (write && !capable(CAP_SYS_ADMIN))
>> + return -EPERM;
>> +
>> + memset(names, 0, sizeof(names));
>> +
>> + if (!write) {
>> + if (!seccomp_names_from_actions_logged(names, sizeof(names),
>> + seccomp_actions_logged))
>> + return -EINVAL;
>> + }
>> +
>> + table = *ro_table;
>> + table.data = names;
>> + table.maxlen = sizeof(names);
>> + ret = proc_dostring(&table, write, buffer, lenp, ppos);
>> + if (ret)
>> + return ret;
>> +
>> + if (write) {
>> + u32 actions_logged;
>> +
>> + if (!seccomp_actions_logged_from_names(&actions_logged,
>> + table.data))
>> + return -EINVAL;
>> +
>> + if (actions_logged & SECCOMP_LOG_ALLOW)
>> + return -EINVAL;
>> +
>> + seccomp_actions_logged = actions_logged;
>> + }
>> +
>> + return 0;
>> +}
>
> One thought here: should "kill" be always forced on during a write?
> This flag effectively cannot be disabled, so listing it (or not) in
> the sysctl may be confusing...
"kill" can be silenced in the current implementation. Lets hammer out
whether or not that's the right thing to do and then we can discuss the
sysctl behavior on write. I don't personally have any concerns about an
admin being able to silence RET_KILL logs but let me know if you are
against it.
Tyler
>
> -Kees
>
On Fri, Aug 11, 2017 at 12:33 PM, Tyler Hicks <[email protected]> wrote:
> On 08/11/2017 02:17 PM, Kees Cook wrote:
>> One thought here: should "kill" be always forced on during a write?
>> This flag effectively cannot be disabled, so listing it (or not) in
>> the sysctl may be confusing...
>
> "kill" can be silenced in the current implementation. Lets hammer out
> whether or not that's the right thing to do and then we can discuss the
> sysctl behavior on write. I don't personally have any concerns about an
> admin being able to silence RET_KILL logs but let me know if you are
> against it.
Oh right, this is fine. Yeah, as long as the default is to log it
(which it is) I'm fine. Thanks!
-Kees
--
Kees Cook
Pixel Security