I propose the following patch to support Hauppauge HVR-1200 analog
video, nothing more than a clone of HVR-1500. Patch based on Linux 4.9
commit 69973b830859bc6529a7a0468ba0d80ee5117826
I have tested composite and S-Video inputs.
With the change, HVR-1200 devices have a /dev/video<n> entry which is
accessible in the normal way.
Let me know if you need anything more.
Nigel Kettlewell
---
drivers/media/pci/cx23885/cx23885-cards.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
b/drivers/media/pci/cx23885/cx23885-cards.c
index 99ba8d6..5be38f1 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -195,7 +195,30 @@ struct cx23885_board cx23885_boards[] = {
},
[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
.name = "Hauppauge WinTV-HVR1200",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61, /* 0xc2 >> 1 */
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .gpio0 = 0,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
.name = "Hauppauge WinTV-HVR1700",
@@ -2262,6 +2285,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_MPX885:
case CX23885_BOARD_MYGICA_X8507:
--
2.9.4
On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
<[email protected]> wrote:
> I propose the following patch to support Hauppauge HVR-1200 analog video,
> nothing more than a clone of HVR-1500. Patch based on Linux 4.9 commit
> 69973b830859bc6529a7a0468ba0d80ee5117826
>
> I have tested composite and S-Video inputs.
>
> With the change, HVR-1200 devices have a /dev/video<n> entry which is
> accessible in the normal way.
>
> Let me know if you need anything more.
I'm not confident the tuner config for this board is correct. The
HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
and IIRC it didn't have an xc3028.
I don't dispute that with the patch in question the composite/s-video
are probably working ok, but I wouldn't recommend accepting this patch
as-is until the tuner is verified for DVB-T and analog (ideally both).
Can you provide the output of dmesg on device load? If it's filled
with a bunch of errors showing xc3028 firmware load failures, that
would be a smoking gun that it doesn't have the xc3028.
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
[adding kernel mailing lists missed from my reply]
Thank you, yes I think I cribbed too much from the 1500. I think the
tuner part is not necessary: I have no analog over-the-air signal so I
cannot test it, hence I have removed the tuner element from the patch
(below).
I have tested DVB-T which works fine. dmesg shows no errors (attached).
DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
--dvb-adapter=0 --programs=8373
<works>
/usr/local/bin/v4l2-ctl --set-input 1
/usr/local/bin/v4l2-ctl -s 0x000000f7
cat /dev/video0 > /tmp/svideo.raw
<ctrl-c>
ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
/tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
<svideo.mpg plays>
Revised patch:
---
drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
b/drivers/media/pci/cx23885/cx23885-cards.c
index 0350f13..1b685f0 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
},
[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
.name = "Hauppauge WinTV-HVR1200",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .gpio0 = 0,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .gpio0 = 0,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
.name = "Hauppauge WinTV-HVR1700",
@@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_MPX885:
case CX23885_BOARD_MYGICA_X8507:
--
2.9.4
> Nigel Kettlewell <mailto:[email protected]>
> 19 September 2017 12:49
> Thank you, yes I think I cribbed too much from the 1500. I think the
> tuner part is not necessary: I have no analog over-the-air signal so I
> cannot test it, hence I have removed the tuner element from the patch
> (below).
>
> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>
> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
> --dvb-adapter=0 --programs=8373
> <works>
>
> /usr/local/bin/v4l2-ctl --set-input 1
> /usr/local/bin/v4l2-ctl -s 0x000000f7
> cat /dev/video0 > /tmp/svideo.raw
> <ctrl-c>
> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
> <svideo.mpg plays>
>
> Revised patch:
>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
> b/drivers/media/pci/cx23885/cx23885-cards.c
> index 0350f13..1b685f0 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
> },
> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
> .name = "Hauppauge WinTV-HVR1200",
> + .porta = CX23885_ANALOG_VIDEO,
> .portc = CX23885_MPEG_DVB,
> + .input = {{
> + .type = CX23885_VMUX_COMPOSITE1,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN6_CH1,
> + .gpio0 = 0,
> + }, {
> + .type = CX23885_VMUX_SVIDEO,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN8_CH1 |
> + CX25840_SVIDEO_ON,
> + .gpio0 = 0,
> + } },
> },
> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
> .name = "Hauppauge WinTV-HVR1700",
> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
> case CX23885_BOARD_HAUPPAUGE_HVR1500:
> case CX23885_BOARD_MPX885:
> case CX23885_BOARD_MYGICA_X8507:
> --
> 2.9.4
>
>
>
> Devin Heitmueller <mailto:[email protected]>
> 18 September 2017 13:57
> On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
>
> I'm not confident the tuner config for this board is correct. The
> HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
> and IIRC it didn't have an xc3028.
>
> I don't dispute that with the patch in question the composite/s-video
> are probably working ok, but I wouldn't recommend accepting this patch
> as-is until the tuner is verified for DVB-T and analog (ideally both).
>
> Can you provide the output of dmesg on device load? If it's filled
> with a bunch of errors showing xc3028 firmware load failures, that
> would be a smoking gun that it doesn't have the xc3028.
>
> Devin
>
> Nigel Kettlewell <mailto:[email protected]>
> 17 September 2017 22:42
> I propose the following patch to support Hauppauge HVR-1200 analog
> video, nothing more than a clone of HVR-1500. Patch based on Linux 4.9
> commit 69973b830859bc6529a7a0468ba0d80ee5117826
>
> I have tested composite and S-Video inputs.
>
> With the change, HVR-1200 devices have a /dev/video<n> entry which is
> accessible in the normal way.
>
> Let me know if you need anything more.
>
> Nigel Kettlewell
>
>
>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
> b/drivers/media/pci/cx23885/cx23885-cards.c
> index 99ba8d6..5be38f1 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -195,7 +195,30 @@ struct cx23885_board cx23885_boards[] = {
> },
> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
> .name = "Hauppauge WinTV-HVR1200",
> + .porta = CX23885_ANALOG_VIDEO,
> .portc = CX23885_MPEG_DVB,
> + .tuner_type = TUNER_XC2028,
> + .tuner_addr = 0x61, /* 0xc2 >> 1 */
> + .input = {{
> + .type = CX23885_VMUX_TELEVISION,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN5_CH2 |
> + CX25840_VIN2_CH1,
> + .gpio0 = 0,
> + }, {
> + .type = CX23885_VMUX_COMPOSITE1,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN6_CH1,
> + .gpio0 = 0,
> + }, {
> + .type = CX23885_VMUX_SVIDEO,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN8_CH1 |
> + CX25840_SVIDEO_ON,
> + .gpio0 = 0,
> + } },
> },
> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
> .name = "Hauppauge WinTV-HVR1700",
> @@ -2262,6 +2285,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
> case CX23885_BOARD_HAUPPAUGE_HVR1500:
> case CX23885_BOARD_MPX885:
> case CX23885_BOARD_MYGICA_X8507:
> --
> 2.9.4
>
Hi Nigel,
Can you repost this as a proper patch? It doesn't apply (issues with tabs and
whitespace: please use tabs!), and I am missing a "Signed-off-by" line (see
https://elinux.org/Developer_Certificate_Of_Origin).
Thanks!
Hans
On 09/19/2017 09:16 PM, Nigel Kettlewell wrote:
> [adding kernel mailing lists missed from my reply]
>
> Thank you, yes I think I cribbed too much from the 1500. I think the
> tuner part is not necessary: I have no analog over-the-air signal so I
> cannot test it, hence I have removed the tuner element from the patch
> (below).
>
> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>
> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
> --dvb-adapter=0 --programs=8373
> <works>
>
> /usr/local/bin/v4l2-ctl --set-input 1
> /usr/local/bin/v4l2-ctl -s 0x000000f7
> cat /dev/video0 > /tmp/svideo.raw
> <ctrl-c>
> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
> <svideo.mpg plays>
>
> Revised patch:
>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
> b/drivers/media/pci/cx23885/cx23885-cards.c
> index 0350f13..1b685f0 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
> },
> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
> .name = "Hauppauge WinTV-HVR1200",
> + .porta = CX23885_ANALOG_VIDEO,
> .portc = CX23885_MPEG_DVB,
> + .input = {{
> + .type = CX23885_VMUX_COMPOSITE1,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN6_CH1,
> + .gpio0 = 0,
> + }, {
> + .type = CX23885_VMUX_SVIDEO,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN8_CH1 |
> + CX25840_SVIDEO_ON,
> + .gpio0 = 0,
> + } },
> },
> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
> .name = "Hauppauge WinTV-HVR1700",
> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
> case CX23885_BOARD_HAUPPAUGE_HVR1500:
> case CX23885_BOARD_MPX885:
> case CX23885_BOARD_MYGICA_X8507:
> --
> 2.9.4
>
>> Nigel Kettlewell <mailto:[email protected]>
>> 19 September 2017 12:49
>> Thank you, yes I think I cribbed too much from the 1500. I think the
>> tuner part is not necessary: I have no analog over-the-air signal so I
>> cannot test it, hence I have removed the tuner element from the patch
>> (below).
>>
>> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>>
>> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
>> --dvb-adapter=0 --programs=8373
>> <works>
>>
>> /usr/local/bin/v4l2-ctl --set-input 1
>> /usr/local/bin/v4l2-ctl -s 0x000000f7
>> cat /dev/video0 > /tmp/svideo.raw
>> <ctrl-c>
>> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
>> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
>> <svideo.mpg plays>
>>
>> Revised patch:
>>
>> ---
>> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>> b/drivers/media/pci/cx23885/cx23885-cards.c
>> index 0350f13..1b685f0 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>> .name = "Hauppauge WinTV-HVR1200",
>> + .porta = CX23885_ANALOG_VIDEO,
>> .portc = CX23885_MPEG_DVB,
>> + .input = {{
>> + .type = CX23885_VMUX_COMPOSITE1,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN6_CH1,
>> + .gpio0 = 0,
>> + }, {
>> + .type = CX23885_VMUX_SVIDEO,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN8_CH1 |
>> + CX25840_SVIDEO_ON,
>> + .gpio0 = 0,
>> + } },
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>> .name = "Hauppauge WinTV-HVR1700",
>> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>> case CX23885_BOARD_MPX885:
>> case CX23885_BOARD_MYGICA_X8507:
>> --
>> 2.9.4
>>
>>
>>
>> Devin Heitmueller <mailto:[email protected]>
>> 18 September 2017 13:57
>> On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
>>
>> I'm not confident the tuner config for this board is correct. The
>> HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
>> and IIRC it didn't have an xc3028.
>>
>> I don't dispute that with the patch in question the composite/s-video
>> are probably working ok, but I wouldn't recommend accepting this patch
>> as-is until the tuner is verified for DVB-T and analog (ideally both).
>>
>> Can you provide the output of dmesg on device load? If it's filled
>> with a bunch of errors showing xc3028 firmware load failures, that
>> would be a smoking gun that it doesn't have the xc3028.
>>
>> Devin
>>
>> Nigel Kettlewell <mailto:[email protected]>
>> 17 September 2017 22:42
>> I propose the following patch to support Hauppauge HVR-1200 analog
>> video, nothing more than a clone of HVR-1500. Patch based on Linux 4.9
>> commit 69973b830859bc6529a7a0468ba0d80ee5117826
>>
>> I have tested composite and S-Video inputs.
>>
>> With the change, HVR-1200 devices have a /dev/video<n> entry which is
>> accessible in the normal way.
>>
>> Let me know if you need anything more.
>>
>> Nigel Kettlewell
>>
>>
>>
>> ---
>> drivers/media/pci/cx23885/cx23885-cards.c | 24 ++++++++++++++++++++++++
>> 1 file changed, 24 insertions(+)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>> b/drivers/media/pci/cx23885/cx23885-cards.c
>> index 99ba8d6..5be38f1 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -195,7 +195,30 @@ struct cx23885_board cx23885_boards[] = {
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>> .name = "Hauppauge WinTV-HVR1200",
>> + .porta = CX23885_ANALOG_VIDEO,
>> .portc = CX23885_MPEG_DVB,
>> + .tuner_type = TUNER_XC2028,
>> + .tuner_addr = 0x61, /* 0xc2 >> 1 */
>> + .input = {{
>> + .type = CX23885_VMUX_TELEVISION,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN5_CH2 |
>> + CX25840_VIN2_CH1,
>> + .gpio0 = 0,
>> + }, {
>> + .type = CX23885_VMUX_COMPOSITE1,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN6_CH1,
>> + .gpio0 = 0,
>> + }, {
>> + .type = CX23885_VMUX_SVIDEO,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN8_CH1 |
>> + CX25840_SVIDEO_ON,
>> + .gpio0 = 0,
>> + } },
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>> .name = "Hauppauge WinTV-HVR1700",
>> @@ -2262,6 +2285,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>> case CX23885_BOARD_MPX885:
>> case CX23885_BOARD_MYGICA_X8507:
>> --
>> 2.9.4
>>
>
To be honest we should probably just drop this, I no longer have the
card in my machine so cannot re-test it if ever needed.
On 4 December 2017 at 12:01, Hans Verkuil <[email protected]> wrote:
> Hi Nigel,
>
> Can you repost this as a proper patch? It doesn't apply (issues with tabs and
> whitespace: please use tabs!), and I am missing a "Signed-off-by" line (see
> https://elinux.org/Developer_Certificate_Of_Origin).
>
> Thanks!
>
> Hans
>
> On 09/19/2017 09:16 PM, Nigel Kettlewell wrote:
>> [adding kernel mailing lists missed from my reply]
>>
>> Thank you, yes I think I cribbed too much from the 1500. I think the
>> tuner part is not necessary: I have no analog over-the-air signal so I
>> cannot test it, hence I have removed the tuner element from the patch
>> (below).
>>
>> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>>
>> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
>> --dvb-adapter=0 --programs=8373
>> <works>
>>
>> /usr/local/bin/v4l2-ctl --set-input 1
>> /usr/local/bin/v4l2-ctl -s 0x000000f7
>> cat /dev/video0 > /tmp/svideo.raw
>> <ctrl-c>
>> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
>> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
>> <svideo.mpg plays>
>>
>> Revised patch:
>>
>> ---
>> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>> b/drivers/media/pci/cx23885/cx23885-cards.c
>> index 0350f13..1b685f0 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>> .name = "Hauppauge WinTV-HVR1200",
>> + .porta = CX23885_ANALOG_VIDEO,
>> .portc = CX23885_MPEG_DVB,
>> + .input = {{
>> + .type = CX23885_VMUX_COMPOSITE1,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN6_CH1,
>> + .gpio0 = 0,
>> + }, {
>> + .type = CX23885_VMUX_SVIDEO,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN8_CH1 |
>> + CX25840_SVIDEO_ON,
>> + .gpio0 = 0,
>> + } },
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>> .name = "Hauppauge WinTV-HVR1700",
>> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>> case CX23885_BOARD_MPX885:
>> case CX23885_BOARD_MYGICA_X8507:
>> --
>> 2.9.4
>>
>>> Nigel Kettlewell <mailto:[email protected]>
>>> 19 September 2017 12:49
>>> Thank you, yes I think I cribbed too much from the 1500. I think the
>>> tuner part is not necessary: I have no analog over-the-air signal so I
>>> cannot test it, hence I have removed the tuner element from the patch
>>> (below).
>>>
>>> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>>>
>>> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
>>> --dvb-adapter=0 --programs=8373
>>> <works>
>>>
>>> /usr/local/bin/v4l2-ctl --set-input 1
>>> /usr/local/bin/v4l2-ctl -s 0x000000f7
>>> cat /dev/video0 > /tmp/svideo.raw
>>> <ctrl-c>
>>> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
>>> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
>>> <svideo.mpg plays>
>>>
>>> Revised patch:
>>>
>>> ---
>>> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
>>> 1 file changed, 16 insertions(+)
>>>
>>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>>> b/drivers/media/pci/cx23885/cx23885-cards.c
>>> index 0350f13..1b685f0 100644
>>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>>> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>>> .name = "Hauppauge WinTV-HVR1200",
>>> + .porta = CX23885_ANALOG_VIDEO,
>>> .portc = CX23885_MPEG_DVB,
>>> + .input = {{
>>> + .type = CX23885_VMUX_COMPOSITE1,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN6_CH1,
>>> + .gpio0 = 0,
>>> + }, {
>>> + .type = CX23885_VMUX_SVIDEO,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN8_CH1 |
>>> + CX25840_SVIDEO_ON,
>>> + .gpio0 = 0,
>>> + } },
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>>> .name = "Hauppauge WinTV-HVR1700",
>>> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>>> case CX23885_BOARD_MPX885:
>>> case CX23885_BOARD_MYGICA_X8507:
>>> --
>>> 2.9.4
>>>
>>>
>>>
>>> Devin Heitmueller <mailto:[email protected]>
>>> 18 September 2017 13:57
>>> On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
>>>
>>> I'm not confident the tuner config for this board is correct. The
>>> HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
>>> and IIRC it didn't have an xc3028.
>>>
>>> I don't dispute that with the patch in question the composite/s-video
>>> are probably working ok, but I wouldn't recommend accepting this patch
>>> as-is until the tuner is verified for DVB-T and analog (ideally both).
>>>
>>> Can you provide the output of dmesg on device load? If it's filled
>>> with a bunch of errors showing xc3028 firmware load failures, that
>>> would be a smoking gun that it doesn't have the xc3028.
>>>
>>> Devin
>>>
>>> Nigel Kettlewell <mailto:[email protected]>
>>> 17 September 2017 22:42
>>> I propose the following patch to support Hauppauge HVR-1200 analog
>>> video, nothing more than a clone of HVR-1500. Patch based on Linux 4.9
>>> commit 69973b830859bc6529a7a0468ba0d80ee5117826
>>>
>>> I have tested composite and S-Video inputs.
>>>
>>> With the change, HVR-1200 devices have a /dev/video<n> entry which is
>>> accessible in the normal way.
>>>
>>> Let me know if you need anything more.
>>>
>>> Nigel Kettlewell
>>>
>>>
>>>
>>> ---
>>> drivers/media/pci/cx23885/cx23885-cards.c | 24 ++++++++++++++++++++++++
>>> 1 file changed, 24 insertions(+)
>>>
>>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>>> b/drivers/media/pci/cx23885/cx23885-cards.c
>>> index 99ba8d6..5be38f1 100644
>>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>>> @@ -195,7 +195,30 @@ struct cx23885_board cx23885_boards[] = {
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>>> .name = "Hauppauge WinTV-HVR1200",
>>> + .porta = CX23885_ANALOG_VIDEO,
>>> .portc = CX23885_MPEG_DVB,
>>> + .tuner_type = TUNER_XC2028,
>>> + .tuner_addr = 0x61, /* 0xc2 >> 1 */
>>> + .input = {{
>>> + .type = CX23885_VMUX_TELEVISION,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN5_CH2 |
>>> + CX25840_VIN2_CH1,
>>> + .gpio0 = 0,
>>> + }, {
>>> + .type = CX23885_VMUX_COMPOSITE1,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN6_CH1,
>>> + .gpio0 = 0,
>>> + }, {
>>> + .type = CX23885_VMUX_SVIDEO,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN8_CH1 |
>>> + CX25840_SVIDEO_ON,
>>> + .gpio0 = 0,
>>> + } },
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>>> .name = "Hauppauge WinTV-HVR1700",
>>> @@ -2262,6 +2285,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>>> case CX23885_BOARD_MPX885:
>>> case CX23885_BOARD_MYGICA_X8507:
>>> --
>>> 2.9.4
>>>
>>
>