Hi all
Sorry for reporting by mail. I do not know how else.
Notebook "HP Pavilion g6", GPT, LVM, UEFI, Secure boot
Linux mint 17.1 64 rebecca, up to date
After installing kernel "4.0.4-040004-generic #201505171336 SMP Sun May
17 17:37:22 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux" the Notebook goes
to hibernation as expected but does does not resume from. After pressing
power button it goes to command line telling something like "...resuming
from disk...." disapearing view moments later (black screen, no
keyboard). Nothing more happening.
Clean restart however working as expected by cycling power off and on
(pressing power button).
Kind regards
Markus
2015-06-02 12:18 GMT-03:00 Markus Weyermann <[email protected]>:
> Notebook "HP Pavilion g6", GPT, LVM, UEFI, Secure boot
Command dmesg and more infos.
Albino
Forwarding email for linux-kernel.
2015-06-02 16:29 GMT-03:00 Markus Weyermann <[email protected]>:
> Dear Albino
>
> I dont know what you mean by "more Infos".
>
> dmesg:
>
> [ 0.367432] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
> [ 0.367512] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
> [ 0.367524] pci 0000:00:02.0: reg 0x10: [mem 0xc2000000-0xc23fffff 64bit]
> [ 0.367531] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff
> 64bit pref]
> [ 0.367536] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
> [ 0.367634] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
> [ 0.367659] pci 0000:00:14.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
> [ 0.367735] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.367765] pci 0000:00:14.0: System wakeup disabled by ACPI
> [ 0.367808] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
> [ 0.367830] pci 0000:00:16.0: reg 0x10: [mem 0xc2614000-0xc261400f 64bit]
> [ 0.367901] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
> [ 0.367977] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
> [ 0.368000] pci 0000:00:1a.0: reg 0x10: [mem 0xc2619000-0xc26193ff]
> [ 0.368096] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> [ 0.368333] pci 0000:00:1a.0: System wakeup disabled by ACPI
> [ 0.368380] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
> [ 0.368398] pci 0000:00:1b.0: reg 0x10: [mem 0xc2610000-0xc2613fff 64bit]
> [ 0.368479] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.368511] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.368552] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
> [ 0.368640] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.368674] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.368714] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
> [ 0.368801] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.368835] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.368875] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
> [ 0.368962] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.368996] pci 0000:00:1c.2: System wakeup disabled by ACPI
> [ 0.369047] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
> [ 0.369069] pci 0000:00:1d.0: reg 0x10: [mem 0xc2618000-0xc26183ff]
> [ 0.369166] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.369317] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.369367] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
> [ 0.369542] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
> [ 0.369562] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
> [ 0.369571] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
> [ 0.369580] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
> [ 0.369588] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
> [ 0.369597] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
> [ 0.369605] pci 0000:00:1f.2: reg 0x24: [mem 0xc2617000-0xc26177ff]
> [ 0.369656] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.369720] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
> [ 0.369737] pci 0000:00:1f.3: reg 0x10: [mem 0xc2615000-0xc26150ff 64bit]
> [ 0.369759] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
> [ 0.369929] pci 0000:01:00.0: [1814:539b] type 00 class 0x028000
> [ 0.369954] pci 0000:01:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff]
> [ 0.377449] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.377456] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
> [ 0.377555] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
> [ 0.377579] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
> [ 0.377614] pci 0000:02:00.0: reg 0x18: [mem 0xc2404000-0xc2404fff
> 64bit pref]
> [ 0.377637] pci 0000:02:00.0: reg 0x20: [mem 0xc2400000-0xc2403fff
> 64bit pref]
> [ 0.377754] pci 0000:02:00.0: supports D1 D2
> [ 0.377756] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.377806] pci 0000:02:00.0: System wakeup disabled by ACPI
> [ 0.385419] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.385427] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
> [ 0.385452] pci 0000:00:1c.1: bridge window [mem
> 0xc2400000-0xc24fffff 64bit pref]
> [ 0.385630] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
> [ 0.385704] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1000fff]
> [ 0.386236] pci 0000:03:00.0: supports D1 D2
> [ 0.386238] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
> [ 0.393487] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [ 0.393492] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
> [ 0.393496] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
> [ 0.393502] pci 0000:00:1c.2: bridge window [mem
> 0xc0000000-0xc0ffffff 64bit pref]
> [ 0.394024] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394075] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394123] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394171] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394218] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394267] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394313] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394361] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12
> 14 15) *0, disabled.
> [ 0.394460] ACPI: Enabled 4 GPEs in block 00 to 3F
> [ 0.394504] ACPI : EC: GPE = 0x1d, I/O: command/status = 0x66, data =
> 0x62
> [ 0.394600] vgaarb: setting as boot device: PCI:0000:00:02.0
> [ 0.394602] vgaarb: device added:
> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.394605] vgaarb: loaded
> [ 0.394607] vgaarb: bridge control possible 0000:00:02.0
> [ 0.394837] SCSI subsystem initialized
> [ 0.394879] libata version 3.00 loaded.
> [ 0.394905] ACPI: bus type USB registered
> [ 0.394921] usbcore: registered new interface driver usbfs
> [ 0.394931] usbcore: registered new interface driver hub
> [ 0.394956] usbcore: registered new device driver usb
> [ 0.395144] PCI: Using ACPI for IRQ routing
> [ 0.402676] PCI: pci_cache_line_size set to 64 bytes
> [ 0.402793] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
> [ 0.402795] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
> [ 0.402796] e820: reserve RAM buffer [mem 0xaa0bf000-0xabffffff]
> [ 0.402798] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
> [ 0.402799] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
> [ 0.402912] NetLabel: Initializing
> [ 0.402913] NetLabel: domain hash size = 128
> [ 0.402914] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.402926] NetLabel: unlabeled traffic allowed by default
> [ 0.402993] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [ 0.402998] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> [ 0.405040] Switched to clocksource hpet
> [ 0.410347] AppArmor: AppArmor Filesystem Enabled
> [ 0.410415] pnp: PnP ACPI init
> [ 0.410752] system 00:00: [io 0x0680-0x069f] has been reserved
> [ 0.410755] system 00:00: [io 0x1000-0x100f] has been reserved
> [ 0.410757] system 00:00: [io 0xffff] has been reserved
> [ 0.410759] system 00:00: [io 0xffff] has been reserved
> [ 0.410761] system 00:00: [io 0x0400-0x0453] could not be reserved
> [ 0.410763] system 00:00: [io 0x0458-0x047f] has been reserved
> [ 0.410764] system 00:00: [io 0x0500-0x057f] has been reserved
> [ 0.410766] system 00:00: [io 0x164e-0x164f] has been reserved
> [ 0.410768] system 00:00: [io 0x0454-0x0457] has been reserved
> [ 0.410770] system 00:00: [io 0x0380-0x0387] has been reserved
> [ 0.410773] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.410805] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.410836] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303
> (active)
> [ 0.410872] pnp 00:03: Plug and Play ACPI device, IDs SYN1e60 SYN1e00
> SYN0002 PNP0f13 (active)
> [ 0.411041] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.411044] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
> [ 0.411045] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
> [ 0.411047] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
> [ 0.411049] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.411051] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
> [ 0.411053] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
> [ 0.411055] system 00:04: [mem 0xff000000-0xffffffff] could not be
> reserved
> [ 0.411057] system 00:04: [mem 0xfee00000-0xfeefffff] could not be
> reserved
> [ 0.411059] system 00:04: [mem 0xafa00000-0xafa00fff] has been reserved
> [ 0.411062] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.411244] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
> [ 0.411246] system 00:05: [mem 0x40004000-0x40004fff] has been reserved
> [ 0.411249] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.411266] pnp: PnP ACPI: found 6 devices
> [ 0.417693] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.417699] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]
> [ 0.417708] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.417712] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
> [ 0.417720] pci 0000:00:1c.1: bridge window [mem
> 0xc2400000-0xc24fffff 64bit pref]
> [ 0.417726] pci 0000:00:1c.2: PCI bridge to [bus 03-08]
> [ 0.417730] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
> [ 0.417735] pci 0000:00:1c.2: bridge window [mem 0xc1000000-0xc1ffffff]
> [ 0.417740] pci 0000:00:1c.2: bridge window [mem
> 0xc0000000-0xc0ffffff 64bit pref]
> [ 0.417747] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 0.417749] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 0.417751] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
> window]
> [ 0.417753] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff
> window]
> [ 0.417755] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff
> window]
> [ 0.417756] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff
> window]
> [ 0.417758] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff
> window]
> [ 0.417760] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff
> window]
> [ 0.417761] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff
> window]
> [ 0.417763] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff
> window]
> [ 0.417765] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff
> window]
> [ 0.417766] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff
> window]
> [ 0.417768] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff
> window]
> [ 0.417770] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff
> window]
> [ 0.417772] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff
> window]
> [ 0.417773] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff
> window]
> [ 0.417775] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfeafffff
> window]
> [ 0.417777] pci_bus 0000:01: resource 1 [mem 0xc2500000-0xc25fffff]
> [ 0.417779] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
> [ 0.417781] pci_bus 0000:02: resource 2 [mem 0xc2400000-0xc24fffff
> 64bit pref]
> [ 0.417782] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
> [ 0.417784] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
> [ 0.417786] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff
> 64bit pref]
> [ 0.417816] NET: Registered protocol family 2
> [ 0.417997] TCP established hash table entries: 65536 (order: 7,
> 524288 bytes)
> [ 0.418156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.418275] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.418290] TCP: reno registered
> [ 0.418302] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.418331] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.418389] NET: Registered protocol family 1
> [ 0.418402] pci 0000:00:02.0: Video device with shadowed ROM
> [ 0.449249] PCI: CLS 64 bytes, default 64
> [ 0.449298] Trying to unpack rootfs image as initramfs...
> [ 0.953777] Freeing initrd memory: 29340K (ffff8800346a2000 -
> ffff880036349000)
> [ 0.953787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.953790] software IO TLB [mem 0xa31b7000-0xa71b7000] (64MB) mapped
> at [ffff8800a31b7000-ffff8800a71b6fff]
> [ 0.953833] Simple Boot Flag at 0x44 set to 0x1
> [ 0.954119] RAPL PMU detected, hw unit 2^-16 Joules, API unit is
> 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
> [ 0.954229] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954237] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954247] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954255] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954263] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954271] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954280] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954288] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
> [ 0.954345] microcode: Microcode Update Driver: v2.00
> <[email protected]>, Peter Oruba
> [ 0.954371] Scanning for low memory corruption every 60 seconds
> [ 0.954738] futex hash table entries: 2048 (order: 5, 131072 bytes)
> [ 0.954761] Initialise system trusted keyring
> [ 0.954782] audit: initializing netlink subsys (disabled)
> [ 0.954797] audit: type=2000 audit(1433268991.904:1): initialized
> [ 0.955191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.956707] zpool: loaded
> [ 0.956709] zbud: loaded
> [ 0.956865] VFS: Disk quotas dquot_6.5.2
> [ 0.956900] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 0.957337] fuse init (API version 7.23)
> [ 0.957476] Key type big_key registered
> [ 0.957884] Key type asymmetric registered
> [ 0.957888] Asymmetric key parser 'x509' registered
> [ 0.957940] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 251)
> [ 0.957994] io scheduler noop registered
> [ 0.957998] io scheduler deadline registered (default)
> [ 0.958031] io scheduler cfq registered
> [ 0.958482] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.958497] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.958530] efifb: probing for efifb
> [ 0.958548] efifb: framebuffer at 0xb0000000, mapped to
> 0xffffc90010f00000, using 4160k, total 4160k
> [ 0.958549] efifb: mode is 1366x768x32, linelength=5504, pages=1
> [ 0.958550] efifb: scrolling: redraw
> [ 0.958552] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [ 0.960991] Console: switching to colour frame buffer device 170x48
> [ 0.963246] fb0: EFI VGA frame buffer device
> [ 0.963256] intel_idle: MWAIT substates: 0x21120
> [ 0.963257] intel_idle: v0.4 model 0x3A
> [ 0.963258] intel_idle: lapic_timer_reliable_states 0xffffffff
> [ 0.963940] ACPI: AC Adapter [ACAD] (on-line)
> [ 0.964030] input: Lid Switch as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [ 0.964619] ACPI: Lid Switch [LID0]
> [ 0.964661] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> [ 0.964665] ACPI: Power Button [PWRB]
> [ 0.964707] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 0.964709] ACPI: Power Button [PWRF]
> [ 0.966168] [Firmware Bug]: Invalid critical threshold (0)
> [ 0.967956] thermal LNXTHERM:00: registered as thermal_zone0
> [ 0.967958] ACPI: Thermal Zone [TZ01] (58 C)
> [ 0.967989] GHES: HEST is not enabled!
> [ 0.968128] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.970503] Linux agpgart interface v0.103
> [ 0.972654] brd: module loaded
> [ 0.973752] loop: module loaded
> [ 0.973979] libphy: Fixed MDIO Bus: probed
> [ 0.973984] tun: Universal TUN/TAP device driver, 1.6
> [ 0.973985] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
> [ 0.974042] PPP generic driver version 2.4.2
> [ 0.974223] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.974230] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 1
> [ 0.974322] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version
> 0x100 quirks 0x0000b930
> [ 0.974330] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [ 0.974415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.974417] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.974418] usb usb1: Product: xHCI Host Controller
> [ 0.974420] usb usb1: Manufacturer: Linux 4.0.4-040004-generic xhci-hcd
> [ 0.974421] usb usb1: SerialNumber: 0000:00:14.0
> [ 0.974533] hub 1-0:1.0: USB hub found
> [ 0.974544] hub 1-0:1.0: 4 ports detected
> [ 0.974888] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 0.974892] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
> bus number 2
> [ 0.974926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
> [ 0.974928] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.974929] usb usb2: Product: xHCI Host Controller
> [ 0.974931] usb usb2: Manufacturer: Linux 4.0.4-040004-generic xhci-hcd
> [ 0.974932] usb usb2: SerialNumber: 0000:00:14.0
> [ 0.975031] hub 2-0:1.0: USB hub found
> [ 0.975040] hub 2-0:1.0: 4 ports detected
> [ 0.975357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.975364] ehci-pci: EHCI PCI platform driver
> [ 0.975455] ehci-pci 0000:00:1a.0: EHCI Host Controller
> [ 0.975459] ehci-pci 0000:00:1a.0: new USB bus registered, assigned
> bus number 3
> [ 0.975472] ehci-pci 0000:00:1a.0: debug port 2
> [ 0.979369] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 0.979381] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2619000
> [ 0.989664] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> [ 0.989695] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.989696] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 0.989698] usb usb3: Product: EHCI Host Controller
> [ 0.989700] usb usb3: Manufacturer: Linux 4.0.4-040004-generic ehci_hcd
> [ 0.989701] usb usb3: SerialNumber: 0000:00:1a.0
> [ 0.989838] hub 3-0:1.0: USB hub found
> [ 0.989844] hub 3-0:1.0: 2 ports detected
> [ 0.990019] ehci-pci 0000:00:1d.0: EHCI Host Controller
> [ 0.990024] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
> bus number 4
> [ 0.990037] ehci-pci 0000:00:1d.0: debug port 2
> [ 0.993940] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 0.993952] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc2618000
> [ 1.005684] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> [ 1.005714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.005715] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.005717] usb usb4: Product: EHCI Host Controller
> [ 1.005718] usb usb4: Manufacturer: Linux 4.0.4-040004-generic ehci_hcd
> [ 1.005720] usb usb4: SerialNumber: 0000:00:1d.0
> [ 1.005903] hub 4-0:1.0: USB hub found
> [ 1.005912] hub 4-0:1.0: 2 ports detected
> [ 1.006020] ehci-platform: EHCI generic platform driver
> [ 1.006032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.006042] ohci-pci: OHCI PCI platform driver
> [ 1.006054] ohci-platform: OHCI generic platform driver
> [ 1.006064] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.006117] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
> at 0x60,0x64 irq 1,12
> [ 1.013855] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.013860] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.014106] mousedev: PS/2 mouse device common for all mice
> [ 1.014501] rtc_cmos 00:01: RTC can wake from S4
> [ 1.014663] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
> [ 1.014694] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram,
> hpet irqs
> [ 1.014711] i2c /dev entries driver
> [ 1.014761] device-mapper: uevent: version 1.0.3
> [ 1.014830] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22)
> initialised: [email protected]
> [ 1.014846] Intel P-state driver initializing.
> [ 1.015081] ledtrig-cpu: registered to indicate activity on CPUs
> [ 1.015085] EFI Variables Facility v0.08 2004-May-17
> [ 1.027241] ACPI: Battery Slot [BAT0] (battery present)
> [ 1.032009] input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input3
> [ 1.302036] usb 3-1: new high-speed USB device number 2 using ehci-pci
> [ 1.318046] usb 4-1: new high-speed USB device number 2 using ehci-pci
> [ 1.450600] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.450603] usb 3-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 1.450888] hub 3-1:1.0: USB hub found
> [ 1.451095] hub 3-1:1.0: 6 ports detected
> [ 1.462608] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
> [ 1.462611] usb 4-1: New USB device strings: Mfr=0, Product=0,
> SerialNumber=0
> [ 1.462879] hub 4-1:1.0: USB hub found
> [ 1.462986] hub 4-1:1.0: 6 ports detected
> [ 1.496745] PCCT header not found.
> [ 1.496843] TCP: cubic registered
> [ 1.496926] NET: Registered protocol family 10
> [ 1.497238] NET: Registered protocol family 17
> [ 1.497249] Key type dns_resolver registered
> [ 1.497900] Loading compiled-in X.509 certificates
> [ 1.498587] Loaded X.509 cert 'Magrathea: Glacier signing key:
> a3b066b3f282dcaa6100a630f5e6827dfa1dd226'
> [ 1.498601] registered taskstats version 1
> [ 1.500328] Key type trusted registered
> [ 1.504389] Key type encrypted registered
> [ 1.504395] AppArmor: AppArmor sha1 policy hashing enabled
> [ 1.504399] ima: No TPM chip found, activating TPM-bypass!
> [ 1.504416] evm: HMAC attrs: 0x1
> [ 1.504911] Magic number: 3:777:290
> [ 1.504928] tty tty23: hash matches
> [ 1.505028] rtc_cmos 00:01: setting system clock to 2015-06-02
> 18:16:32 UTC (1433268992)
> [ 1.505085] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 1.505085] EDD information not available.
> [ 1.505161] PM: Hibernation image not present or could not be loaded.
> [ 1.505518] Freeing unused kernel memory: 1420K (ffffffff81d1e000 -
> ffffffff81e81000)
> [ 1.505519] Write protecting the kernel read-only data: 12288k
> [ 1.505768] Freeing unused kernel memory: 28K (ffff8800027f9000 -
> ffff880002800000)
> [ 1.505844] Freeing unused kernel memory: 176K (ffff880002bd4000 -
> ffff880002c00000)
> [ 1.514468] systemd-udevd[156]: starting version 204
> [ 1.526896] wmi: Mapper loaded
> [ 1.528469] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en
> = 1, pci->irq = 25
> [ 1.530275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 1.530284] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have
> ASPM control
> [ 1.530539] ahci 0000:00:1f.2: version 3.0
> [ 1.530702] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90010ea8000,
> 38:ea:a7:ef:c4:7f, XID 00c00000 IRQ 26
> [ 1.532800] [drm] Initialized drm 1.1.0 20060810
> [ 1.546272] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps
> 0x11 impl SATA mode
> [ 1.546277] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum
> part ems apst
> [ 1.554694] scsi host0: ahci
> [ 1.554789] scsi host1: ahci
> [ 1.554866] scsi host2: ahci
> [ 1.554945] scsi host3: ahci
> [ 1.555025] scsi host4: ahci
> [ 1.555102] scsi host5: ahci
> [ 1.555140] ata1: SATA max UDMA/133 abar m2048@0xc2617000 port
> 0xc2617100 irq 27
> [ 1.555141] ata2: DUMMY
> [ 1.555142] ata3: DUMMY
> [ 1.555143] ata4: DUMMY
> [ 1.555146] ata5: SATA max UDMA/133 abar m2048@0xc2617000 port
> 0xc2617300 irq 27
> [ 1.555146] ata6: DUMMY
> [ 1.555645] [drm] Memory usable by graphics device = 2048M
> [ 1.555648] checking generic (b0000000 410000) vs hw (b0000000 10000000)
> [ 1.555649] fb: switching to inteldrmfb from EFI VGA
> [ 1.555665] Console: switching to colour dummy device 80x25
> [ 1.555729] [drm] Replacing VGA console driver
> [ 1.578429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 1.578432] [drm] Driver supports precise vblank timestamp query.
> [ 1.578530] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 1.603080] ACPI: Video Device [GFX0] (multi-head: yes rom: no
> post: no)
> [ 1.603180] input: Video Bus as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
> [ 1.603304] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on
> minor 0
> [ 1.619877] fbcon: inteldrmfb (fb0) is primary device
> [ 1.734631] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
> [ 1.874696] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.874719] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.878252] ata1.00: ATA-8: TOSHIBA MQ01ABD050, AX001C, max UDMA/100
> [ 1.878255] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
> [ 1.878901] ata5.00: ATAPI: hp DVD A DS8A9SH, EH61, max UDMA/100
> [ 1.883276] ata1.00: configured for UDMA/100
> [ 1.883515] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0
> 1C PQ: 0 ANSI: 5
> [ 1.883885] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
> GB/465 GiB)
> [ 1.883887] sd 0:0:0:0: [sda] 4096-byte physical blocks
> [ 1.883935] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.883937] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.883949] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.883953] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1.885360] ata5.00: configured for UDMA/100
> [ 1.898498] usb 4-1.5: New USB device found, idVendor=04f2,
> idProduct=b34f
> [ 1.898501] usb 4-1.5: New USB device strings: Mfr=3, Product=1,
> SerialNumber=2
> [ 1.898504] usb 4-1.5: Product: HP Truevision HD
> [ 1.898506] usb 4-1.5: Manufacturer: Chicony Electronics Co.,Ltd.
> [ 1.898507] usb 4-1.5: SerialNumber: 0x0001
> [ 1.900204] scsi 4:0:0:0: CD-ROM hp DVD A DS8A9SH
> EH61 PQ: 0 ANSI: 5
> [ 1.928519] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram
> cd/rw xa/form2 cdda tray
> [ 1.928521] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 1.928750] sr 4:0:0:0: Attached scsi CD-ROM sr0
> [ 1.928890] sr 4:0:0:0: Attached scsi generic sg1 type 5
> [ 1.954748] tsc: Refined TSC clocksource calibration: 2195.017 MHz
> [ 2.027776] sda: sda1 sda2 sda3
> [ 2.028388] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 2.259514] psmouse serio1: synaptics: queried max coordinates: x
> [..5734], y [..4974]
> [ 2.276505] Console: switching to colour frame buffer device 170x48
> [ 2.278136] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 2.278137] i915 0000:00:02.0: registered panic notifier
> [ 2.290527] psmouse serio1: synaptics: queried min coordinates: x
> [1222..], y [910..]
> [ 2.351700] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5,
> id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400, board id: 2068, fw id: 1028260
> [ 2.390654] input: SynPS/2 Synaptics TouchPad as
> /devices/platform/i8042/serio1/input/input6
> [ 2.548403] random: lvm urandom read with 88 bits of entropy available
> [ 2.955910] Switched to clocksource tsc
> [ 3.198786] random: nonblocking pool is initialized
> [ 3.766861] EXT4-fs (dm-0): mounted filesystem with ordered data
> mode. Opts: (null)
> [ 16.661427] Adding 8273916k swap on /dev/mapper/mint--vg-swap_1.
> Priority:-1 extents:1 across:8273916k FS
> [ 16.706670] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
> [ 16.735621] systemd-udevd[494]: starting version 204
> [ 16.830795] EXT4-fs (sda2): mounting ext2 file system using the ext4
> subsystem
> [ 16.866256] EXT4-fs (sda2): mounted filesystem without journal. Opts:
> (null)
> [ 17.268281] Initializing HPQ6001 module
> [ 17.268338] input: HP Wireless hotkeys as /devices/virtual/input/input8
> [ 17.274392] ACPI Warning: SystemIO range
> 0x0000000000000428-0x000000000000042F conflicts with OpRegion
> 0x0000000000000400-0x000000000000047F (\PMIO) (20150204/utaddress-254)
> [ 17.274397] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274400] ACPI Warning: SystemIO range
> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
> [ 17.274403] ACPI Warning: SystemIO range
> 0x0000000000000540-0x000000000000054F conflicts with OpRegion
> 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO)
> (20150204/utaddress-254)
> [ 17.274406] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274407] ACPI Warning: SystemIO range
> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
> [ 17.274409] ACPI Warning: SystemIO range
> 0x0000000000000530-0x000000000000053F conflicts with OpRegion
> 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO)
> (20150204/utaddress-254)
> [ 17.274411] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274412] ACPI Warning: SystemIO range
> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
> [ 17.274414] ACPI Warning: SystemIO range
> 0x0000000000000500-0x000000000000052F conflicts with OpRegion
> 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO)
> (20150204/utaddress-254)
> [ 17.274416] ACPI: If an ACPI driver is available for this device, you
> should use it instead of the native driver
> [ 17.274417] lpc_ich: Resource conflict(s) found affecting gpio_ich
> [ 17.314154] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 17.345836] device-mapper: multipath: version 1.8.0 loaded
> [ 17.446329] hp_accel: laptop model unknown, using default axes
> configuration
> [ 17.455408] lis3lv02d: 8 bits 3DC sensor found
> [ 17.481401] input: HP WMI hotkeys as /devices/virtual/input/input9
> [ 17.498977] input: ST LIS3LV02DL Accelerometer as
> /devices/platform/lis3lv02d/input/input10
> [ 17.657604] lp: driver loaded but no devices found
> [ 17.677845] AVX version of gcm_enc/dec engaged.
> [ 17.677848] AES CTR mode by8 optimization enabled
> [ 17.745457] ppdev: user-space parallel port driver
> [ 17.865730] cfg80211: Calling CRDA to update world regulatory domain
> [ 18.003928] media: Linux media interface: v0.10
> [ 18.046828] cfg80211: World regulatory domain updated:
> [ 18.046831] cfg80211: DFS Master region: unset
> [ 18.046832] cfg80211: (start_freq - end_freq @ bandwidth),
> (max_antenna_gain, max_eirp), (dfs_cac_time)
> [ 18.046834] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046836] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046837] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046838] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.046839] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
> mBi, 2000 mBm), (N/A)
> [ 18.294279] Linux video capture interface: v2.00
> [ 18.373666] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390,
> rev 1502 detected
> [ 18.377795] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390
> detected
> [ 18.407552] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> [ 18.425361] intel_rapl: Found RAPL domain package
> [ 18.425365] intel_rapl: Found RAPL domain core
> [ 18.425366] intel_rapl: Found RAPL domain uncore
> [ 18.513909] sound hdaudioC0D0: autoconfig for 92HD87B2/4: line_outs=1
> (0xd/0x0/0x0/0x0/0x0) type:speaker
> [ 18.513913] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 18.513914] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> [ 18.513915] sound hdaudioC0D0: mono: mono_out=0x0
> [ 18.513917] sound hdaudioC0D0: inputs:
> [ 18.513918] sound hdaudioC0D0: Internal Mic=0x11
> [ 18.513920] sound hdaudioC0D0: Mic=0xc
> [ 18.546226] input: HDA Intel PCH Mic as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> [ 18.546287] input: HDA Intel PCH Headphone as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> [ 18.546338] input: HDA Intel PCH HDMI/DP,pcm=3 as
> /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
> [ 18.666979] init: failsafe main process (804) killed by TERM signal
> [ 18.782999] uvcvideo: Found UVC 1.00 device HP Truevision HD (04f2:b34f)
> [ 18.794320] input: HP Truevision HD as
> /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input14
> [ 18.794434] usbcore: registered new interface driver uvcvideo
> [ 18.794435] USB Video Class driver (1.1.1)
> [ 20.249433] init: cups main process (890) killed by HUP signal
> [ 20.249442] init: cups main process ended, respawning
> [ 20.360775] Bluetooth: Core ver 2.20
> [ 20.360790] NET: Registered protocol family 31
> [ 20.360791] Bluetooth: HCI device and connection manager initialized
> [ 20.360794] Bluetooth: HCI socket layer initialized
> [ 20.360796] Bluetooth: L2CAP socket layer initialized
> [ 20.360800] Bluetooth: SCO socket layer initialized
> [ 20.439989] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 20.439993] Bluetooth: BNEP filters: protocol multicast
> [ 20.439996] Bluetooth: BNEP socket layer initialized
> [ 20.615008] Bluetooth: RFCOMM TTY layer initialized
> [ 20.615015] Bluetooth: RFCOMM socket layer initialized
> [ 20.615021] Bluetooth: RFCOMM ver 1.11
> [ 21.750860] ieee80211 phy0: rt2x00lib_request_firmware: Info -
> Loading firmware file 'rt2860.bin'
> [ 22.012353] ieee80211 phy0: rt2x00lib_request_firmware: Info -
> Firmware detected - version: 0.34
> [ 22.140387] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> [ 22.268946] init: samba-ad-dc main process (965) terminated with status 1
> [ 22.419098] r8169 0000:02:00.0 eth0: link down
> [ 22.419132] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 24.717319] init: plymouth-upstart-bridge main process ended, respawning
> [ 47.164869] wlan0: authenticate with 00:50:7f:cb:f6:e0
> [ 47.175079] wlan0: direct probe to 00:50:7f:cb:f6:e0 (try 1/3)
> [ 47.378217] wlan0: send auth to 00:50:7f:cb:f6:e0 (try 2/3)
> [ 47.379386] wlan0: authenticated
> [ 47.382224] wlan0: associate with 00:50:7f:cb:f6:e0 (try 1/3)
> [ 47.398705] wlan0: RX AssocResp from 00:50:7f:cb:f6:e0 (capab=0x411
> status=0 aid=2)
> [ 47.398799] wlan0: associated
> [ 47.398809] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> [ 82.070656] init: plymouth-stop pre-start process (2423) terminated
> with status 1
>
>
> Kind regards
> Markus
>
>
> Am 02.06.2015 um 20:25 schrieb Albino Biasutti Neto:
>> 2015-06-02 12:18 GMT-03:00 Markus Weyermann <[email protected]>:
>>> Notebook "HP Pavilion g6", GPT, LVM, UEFI, Secure boot
>>
>> Command dmesg and more infos.
>>
>>
>> Albino
>>
--
Albino
On Tue 2015-06-02 20:57:46, Albino Biasutti Neto wrote:
> Forwarding email for linux-kernel.
>
>
> 2015-06-02 16:29 GMT-03:00 Markus Weyermann <[email protected]>:
> > Dear Albino
> >
> > I dont know what you mean by "more Infos".
> >
Nothing too obvious there. Did it ever work?
lspci?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Pavel
I just verified:
3.19.0-18 does resume as well from "Bereitschaft" (probably standby) as
from "Ruhezustand" (hibernation).
4.0.4-040004 does resume from standby but not from hibernation.
lspci:
>
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM
Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core
processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC
Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller (rev 04)
01:00.0 Network controller: Ralink corp. Device 539b
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229
PCI Express Card Reader (rev 01)
>
Kind regards
Markus
Am 06.07.2015 um 14:22 schrieb Pavel Machek:
> On Tue 2015-06-02 20:57:46, Albino Biasutti Neto wrote:
>> Forwarding email for linux-kernel.
>>
>>
>> 2015-06-02 16:29 GMT-03:00 Markus Weyermann <[email protected]>:
>>> Dear Albino
>>>
>>> I dont know what you mean by "more Infos".
>>>
>
> Nothing too obvious there. Did it ever work?
>
> lspci?
>
> Pavel
>
On Mon 2015-07-06 20:13:45, Markus Weyermann wrote:
> Pavel
>
> I just verified:
>
> 3.19.0-18 does resume as well from "Bereitschaft" (probably standby) as
> from "Ruhezustand" (hibernation).
>
> 4.0.4-040004 does resume from standby but not from hibernation.
Ok, can you unload the Realtek/Ralink stuff and try hibernation?
Otherwise its Intel graphics, pretty boring stuff.
Is bisect an option?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Pavel
I don't know whats going on.
One time it seemed to run as expected. But I could not reproduce. Maybe
i missed something.
unloading
rt2800pci
rt2800mmio
rt2800lib
rt2x00pci
rt2x00mmio
rt2x00lib
r8169
does not change anything.
I'm probably not familiar enough with linux to bisect, sorry.
Kind regards
Markus
Am 07.07.2015 um 12:26 schrieb Pavel Machek:
> On Mon 2015-07-06 20:13:45, Markus Weyermann wrote:
>> Pavel
>>
>> I just verified:
>>
>> 3.19.0-18 does resume as well from "Bereitschaft" (probably standby) as
>> from "Ruhezustand" (hibernation).
>>
>> 4.0.4-040004 does resume from standby but not from hibernation.
>
> Ok, can you unload the Realtek/Ralink stuff and try hibernation?
> Otherwise its Intel graphics, pretty boring stuff.
>
> Is bisect an option?
> Pavel
>