2014-06-25 10:41:24

by Naveen Krishna Chatradhi

[permalink] [raw]
Subject: [PATCH 1/2] i2c: exynos5: remove an unnecessary read of FIFO_STATUS register

This patch removes an extra read of FIFO_STATUS register in the interrrupt
service routine. Which is read again before the actual use.

Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
---
drivers/i2c/busses/i2c-exynos5.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 63d2292..0d1a7bc 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -405,7 +405,6 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)

int_status = readl(i2c->regs + HSI2C_INT_STATUS);
writel(int_status, i2c->regs + HSI2C_INT_STATUS);
- fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);

/* handle interrupt related to the transfer status */
if (int_status & HSI2C_INT_I2C) {
--
1.7.9.5


2014-06-25 10:41:28

by Naveen Krishna Chatradhi

[permalink] [raw]
Subject: [PATCH 2/2] i2c: exynos5: fix minor styling nits

This patch removes an extra line and fixes a styling nit
in exynos5_i2c_message_start()

Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
---
drivers/i2c/busses/i2c-exynos5.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 0d1a7bc..4c2e6f3 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -525,7 +525,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
if (i2c->msg->flags & I2C_M_RD) {
i2c_ctl |= HSI2C_RXCHON;

- i2c_auto_conf = HSI2C_READ_WRITE;
+ i2c_auto_conf |= HSI2C_READ_WRITE;

trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
(i2c->variant->fifo_depth * 3 / 4) : i2c->msg->len;
@@ -548,7 +548,6 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
writel(i2c_ctl, i2c->regs + HSI2C_CTL);

-
/*
* Enable interrupts before starting the transfer so that we don't
* miss any INT_I2C interrupts.
--
1.7.9.5

2014-06-25 10:49:36

by Sachin Kamat

[permalink] [raw]
Subject: Re: [PATCH 2/2] i2c: exynos5: fix minor styling nits

Hi Naveen,

On Wed, Jun 25, 2014 at 4:08 PM, Naveen Krishna Chatradhi
<[email protected]> wrote:
> This patch removes an extra line and fixes a styling nit
> in exynos5_i2c_message_start()
>
> Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
> ---
> drivers/i2c/busses/i2c-exynos5.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
> index 0d1a7bc..4c2e6f3 100644
> --- a/drivers/i2c/busses/i2c-exynos5.c
> +++ b/drivers/i2c/busses/i2c-exynos5.c
> @@ -525,7 +525,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
> if (i2c->msg->flags & I2C_M_RD) {
> i2c_ctl |= HSI2C_RXCHON;
>
> - i2c_auto_conf = HSI2C_READ_WRITE;
> + i2c_auto_conf |= HSI2C_READ_WRITE;

This change looks more than just a styling nit. Please update the commit message
accordingly.

--
Regards,
Sachin.

2014-06-26 04:59:03

by Naveen Krishna Ch

[permalink] [raw]
Subject: Re: [PATCH 2/2] i2c: exynos5: fix minor styling nits

Hello Sachin,

On 25 June 2014 16:19, Sachin Kamat <[email protected]> wrote:
> Hi Naveen,
>
> On Wed, Jun 25, 2014 at 4:08 PM, Naveen Krishna Chatradhi
> <[email protected]> wrote:
>> This patch removes an extra line and fixes a styling nit
>> in exynos5_i2c_message_start()
>>
>> Signed-off-by: Naveen Krishna Chatradhi <[email protected]>
>> ---
>> drivers/i2c/busses/i2c-exynos5.c | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
>> index 0d1a7bc..4c2e6f3 100644
>> --- a/drivers/i2c/busses/i2c-exynos5.c
>> +++ b/drivers/i2c/busses/i2c-exynos5.c
>> @@ -525,7 +525,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
>> if (i2c->msg->flags & I2C_M_RD) {
>> i2c_ctl |= HSI2C_RXCHON;
>>
>> - i2c_auto_conf = HSI2C_READ_WRITE;
>> + i2c_auto_conf |= HSI2C_READ_WRITE;
>
> This change looks more than just a styling nit. Please update the commit message
> accordingly.

Yea, change looks so.

But, This is not an going to change the way code works.

As, i2c_auto_conf is initialized to '0' at the beginning of the function
and HSI2C_READ_WRITE is defined as (1u << 16)

This being the 1st usage, I thought using "|=" is better way of assignment.

Will edit the commit message accordingly.

>
> --
> Regards,
> Sachin.

Thanks,



--
Shine bright,
(: Nav :)