Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.
This series is a bunch of fixes in patches 1-3 found by setting
'additionalProperties: false' and then patch 4 sets additionalProperties
on a bunch of schema.
Rob
Rob Herring (4):
dt-bindings: iio/accel: Drop duplicate adi,adxl345/6 from
trivial-devices.yaml
dt-bindings: sram: qcom: Clean-up 'ranges' and child node names
dt-bindings: Clean-up schema errors due to missing
'addtionalProperties: false'
dt-bindings: Add missing 'additionalProperties: false'
.../arm/altera/socfpga-clk-manager.yaml | 2 ++
.../amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
.../bindings/arm/msm/qcom,llcc.yaml | 2 ++
.../devicetree/bindings/arm/renesas,prr.yaml | 2 ++
.../bindings/arm/samsung/exynos-chipid.yaml | 2 ++
.../devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
.../arm/samsung/samsung-secure-firmware.yaml | 2 ++
.../bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
.../devicetree/bindings/clock/fsl,plldig.yaml | 5 ++++
.../bindings/clock/imx8mn-clock.yaml | 2 ++
.../bindings/clock/imx8mp-clock.yaml | 2 ++
.../bindings/clock/milbeaut-clock.yaml | 2 ++
.../bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
.../bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
.../bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
.../bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
.../bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
.../bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
.../bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
.../devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
.../devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
.../bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
.../bindings/clock/qcom,rpmhcc.yaml | 2 ++
.../bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
.../bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
.../bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
.../bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
.../bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
.../bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
.../bindings/display/amlogic,meson-vpu.yaml | 2 ++
.../bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
.../devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
.../devicetree/bindings/eeprom/at24.yaml | 2 ++
...ntel,ixp4xx-network-processing-engine.yaml | 3 +++
.../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
.../gpio/socionext,uniphier-gpio.yaml | 4 +++
.../bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
.../bindings/gpu/arm,mali-bifrost.yaml | 8 +++---
.../bindings/gpu/arm,mali-midgard.yaml | 5 ++++
.../bindings/gpu/arm,mali-utgard.yaml | 2 ++
.../bindings/gpu/samsung-rotator.yaml | 2 ++
.../bindings/hwmon/adi,adm1177.yaml | 2 ++
.../bindings/hwmon/adi,ltc2947.yaml | 2 ++
.../bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
.../devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
.../bindings/iio/accel/adi,adxl345.yaml | 10 +++++---
.../bindings/iio/accel/bosch,bma400.yaml | 2 ++
.../bindings/iio/adc/adi,ad7192.yaml | 1 -
.../bindings/iio/adc/adi,ad7780.yaml | 2 ++
.../bindings/iio/adc/avia-hx711.yaml | 2 ++
.../bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
.../bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
.../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
.../iio/chemical/plantower,pms7003.yaml | 2 ++
.../iio/chemical/sensirion,sps30.yaml | 2 ++
.../bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
.../bindings/iio/light/adux1020.yaml | 2 ++
.../devicetree/bindings/iio/light/bh1750.yaml | 2 ++
.../bindings/iio/light/isl29018.yaml | 2 ++
.../bindings/iio/light/noa1305.yaml | 2 ++
.../bindings/iio/light/stk33xx.yaml | 2 ++
.../bindings/iio/light/tsl2583.yaml | 2 ++
.../bindings/iio/light/tsl2772.yaml | 2 ++
.../bindings/iio/light/veml6030.yaml | 2 ++
.../bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
.../bindings/iio/pressure/bmp085.yaml | 5 ++++
.../iio/proximity/devantech-srf04.yaml | 2 ++
.../bindings/iio/proximity/parallax-ping.yaml | 2 ++
.../bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
.../bindings/input/gpio-vibrator.yaml | 2 ++
.../bindings/input/max77650-onkey.yaml | 3 +++
.../intel,ixp4xx-interrupt.yaml | 2 ++
.../bindings/iommu/samsung,sysmmu.yaml | 2 ++
.../bindings/leds/leds-max77650.yaml | 3 +++
.../bindings/leds/rohm,bd71828-leds.yaml | 3 +++
.../mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
.../bindings/media/amlogic,gx-vdec.yaml | 2 ++
.../media/amlogic,meson-gx-ao-cec.yaml | 11 +++++---
.../bindings/media/renesas,ceu.yaml | 2 ++
.../devicetree/bindings/mfd/max77650.yaml | 2 ++
.../bindings/mfd/rohm,bd71828-pmic.yaml | 5 ++++
.../misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++
.../bindings/net/ti,cpsw-switch.yaml | 25 +++++++++++++------
.../phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++
.../phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
.../bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++
.../bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++
.../bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++
.../pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++
.../pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++
.../pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++
.../bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++
.../bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
.../bindings/power/reset/syscon-poweroff.yaml | 2 ++
.../bindings/power/reset/syscon-reboot.yaml | 2 ++
.../power/supply/max77650-charger.yaml | 3 +++
.../devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++
.../regulator/max77650-regulator.yaml | 5 +++-
.../bindings/reset/amlogic,meson-reset.yaml | 2 ++
.../reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++
.../bindings/rng/amlogic,meson-rng.yaml | 2 ++
.../devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++
.../bindings/rtc/renesas,sh-rtc.yaml | 2 ++
.../devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++
.../bindings/serial/amlogic,meson-uart.yaml | 2 ++
.../bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
.../bindings/sound/adi,adau7118.yaml | 2 ++
.../bindings/sound/qcom,wcd934x.yaml | 2 ++
.../bindings/sound/renesas,fsi.yaml | 2 ++
.../bindings/sound/samsung,odroid.yaml | 2 ++
.../bindings/sound/samsung-i2s.yaml | 2 ++
.../devicetree/bindings/sram/qcom,ocmem.yaml | 14 ++++++-----
.../bindings/thermal/amlogic,thermal.yaml | 4 +++
.../bindings/timer/arm,arch_timer.yaml | 2 ++
.../bindings/timer/arm,arch_timer_mmio.yaml | 4 +++
.../bindings/timer/arm,global_timer.yaml | 2 ++
.../bindings/timer/intel,ixp4xx-timer.yaml | 2 ++
.../timer/samsung,exynos4210-mct.yaml | 2 ++
.../devicetree/bindings/trivial-devices.yaml | 6 ++---
119 files changed, 296 insertions(+), 29 deletions(-)
--
2.20.1
The 'adi,adxl345' definition is a duplicate as there's a full binding in:
Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
The trivial-devices binding doesn't capture that 'adi,adxl346' has a
fallback compatible 'adi,adxl345', so let's add it to adi,adxl345.yaml.
Cc: Michael Hennerich <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Hartmut Knaack <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Peter Meerwald-Stadler <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 10 +++++++---
Documentation/devicetree/bindings/trivial-devices.yaml | 4 ----
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index c602b6fe1c0c..d124eba1ce54 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -17,9 +17,13 @@ description: |
properties:
compatible:
- enum:
- - adi,adxl345
- - adi,adxl375
+ oneOf:
+ - items:
+ - const: adi,adxl346
+ - const: adi,adxl345
+ - enum:
+ - adi,adxl345
+ - adi,adxl375
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 978de7d37c66..51d1f6e43c02 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -42,10 +42,6 @@ properties:
- adi,adt7476
# +/-1C TDM Extended Temp Range I.C
- adi,adt7490
- # Three-Axis Digital Accelerometer
- - adi,adxl345
- # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
- - adi,adxl346
# AMS iAQ-Core VOC Sensor
- ams,iaq-core
# i2c serial eeprom (24cxx)
--
2.20.1
Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.
Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.
So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++
.../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++
Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++
.../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++
Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
.../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++
.../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++
Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++
Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++
Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
.../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++
.../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
.../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
.../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
.../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
.../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
.../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
.../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++
.../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
.../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++
Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++
Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++
Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++
Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++
Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++
Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++
Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
.../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
.../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
.../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++
.../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++
Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++
Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++
.../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++
.../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++
.../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++
.../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++
Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++
.../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++
Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++
Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++
Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++
.../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
.../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++
Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++
Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++
.../bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++
Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 2 ++
.../devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++
.../bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++
.../devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++
Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++
.../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++
.../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++
.../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++
.../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++
.../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
.../devicetree/bindings/power/reset/syscon-poweroff.yaml | 2 ++
.../devicetree/bindings/power/reset/syscon-reboot.yaml | 2 ++
.../devicetree/bindings/power/supply/max77650-charger.yaml | 3 +++
Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++
.../devicetree/bindings/regulator/max77650-regulator.yaml | 3 +++
.../devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++
.../bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++
Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++
Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++
Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml | 2 ++
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++
.../devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++
.../devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 ++
Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml | 2 ++
Documentation/devicetree/bindings/sound/renesas,fsi.yaml | 2 ++
Documentation/devicetree/bindings/sound/samsung,odroid.yaml | 2 ++
Documentation/devicetree/bindings/sound/samsung-i2s.yaml | 2 ++
Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 2 ++
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++
Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 2 ++
.../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
Documentation/devicetree/bindings/timer/arm,global_timer.yaml | 2 ++
.../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 2 ++
.../devicetree/bindings/timer/samsung,exynos4210-mct.yaml | 2 ++
Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
117 files changed, 240 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index e4131fa42b26..572381306681 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -21,6 +21,8 @@ properties:
required:
- compatible
+additionalProperties: false
+
examples:
- |
clkmgr@ffd04000 {
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 853d7d2b56f5..66213bd95e6e 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -43,6 +43,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
ao-secure@140 {
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
index 79902f470e4b..c3a8604dfa80 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -43,6 +43,8 @@ required:
- reg-names
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
index 7f8d17f33983..dd087643a9f8 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
@@ -27,6 +27,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
prr: chipid@ff000044 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
index afcd70803c12..0425d333b50d 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
@@ -30,6 +30,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
chipid@10000000 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index 73b56fc5bf58..c9651892710e 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -89,6 +89,8 @@ required:
- clock-names
- clocks
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
index 51d23b6f8a94..3d9abad3c749 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
@@ -23,6 +23,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
firmware@203f000 {
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 0dedf94c8578..baff80197d5a 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -29,6 +29,8 @@ required:
- reg
- clocks
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/stm32mp1-clks.h>
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index d1c040228cf7..a203d5d498db 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -44,6 +44,8 @@ required:
- clocks
- '#clock-cells'
+additionalProperties: false
+
examples:
# Display PIXEL Clock node:
- |
diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
index cd0b8a341321..03386b0861a2 100644
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
@@ -52,6 +52,8 @@ required:
- clock-names
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
index 89aee63c9019..4351a1dbb4f7 100644
--- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
@@ -52,6 +52,8 @@ required:
- clock-names
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index f0b804a7f096..0e8b07710451 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -35,6 +35,8 @@ required:
- clocks
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock controller node:
- |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 3647007f82ca..eacccc88bbf6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -68,6 +68,8 @@ required:
- nvmem-cell-names
- '#thermal-sensor-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@900000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 89c6e070e7ac..98572b4a9b60 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -40,6 +40,8 @@ required:
- '#clock-cells'
- '#reset-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 18e4e77b8cfa..5a5b2214f0ca 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -56,6 +56,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@300000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 1d3cae980471..a0bb713929b0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -66,6 +66,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index 8cdece395eba..ce06f3f8c3e3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -40,6 +40,8 @@ required:
- '#clock-cells'
- '#reset-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index ee4f968e2909..a345320e0e49 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -58,6 +58,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 888e9a708390..36f3b3668ced 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -56,6 +56,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index d18f8ab9eeee..e533bb0cfd2b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -74,6 +74,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
# Example for GCC for MSM8960:
- |
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 85518494ce43..f684fe67db84 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -74,6 +74,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
index 7d853c1a85e5..d747bb58f0a7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -50,6 +50,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 2cd158f13bab..c9fd748b4d7c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -35,6 +35,8 @@ required:
- compatible
- '#clock-cells'
+additionalProperties: false
+
examples:
# Example for GCC for SDM845: The below node should be defined inside
# &apps_rsc node.
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index 0429062f1585..58cdfd5924d3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -58,6 +58,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
index 5785192cc4be..8635e35fd3f0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
@@ -52,6 +52,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
index 31df901884ac..0071b9701960 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
@@ -48,6 +48,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 89269ddfbdcd..ad47d747a3e4 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -67,6 +67,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
index bac04f1c5d79..7a052ac5dc00 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
@@ -52,6 +52,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
index 9d216c0f11d4..2a6a81ab0318 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
@@ -48,6 +48,8 @@ required:
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index d1205a6697a0..d8e573eeb5ec 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -107,6 +107,8 @@ required:
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
vpu: vpu@d0100000 {
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index 2ca3ddbe1ff4..e7f2ad7dab5e 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -43,6 +43,8 @@ required:
- interrupts
- '#dma-cells'
+additionalProperties: false
+
examples:
- |
dma@3000000 {
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index f04870d84542..a5dc070d0ca7 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -68,6 +68,8 @@ required:
- mbox-names
- memory-region
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/firmware/imx/rsrc.h>
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 0f6d8db18d6c..a15787e504f0 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -172,6 +172,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index 878a2079ebb6..1bd2870c3a9c 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -34,9 +34,12 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
npe@c8006000 {
compatible = "intel,ixp4xx-network-processing-engine";
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
};
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 64e279a4bc10..5f1ed20e43ee 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -47,6 +47,8 @@ required:
- "#gpio-cells"
- gpio-controller
+additionalProperties: false
+
dependencies:
interrupt-controller: [ interrupts ]
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index c58ff9a94f45..1a54db04f29d 100644
--- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -64,6 +64,8 @@ required:
- gpio-ranges
- socionext,interrupt-ranges
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
index d102888c1be7..a36aec27069c 100644
--- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
@@ -49,6 +49,8 @@ required:
- "#gpio-cells"
- gpio-controller
+additionalProperties: false
+
examples:
- |
logicvc: logicvc@43c00000 {
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 05fd9a404ff7..0b229a7d4a98 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -53,6 +53,8 @@ required:
- interrupt-names
- clocks
+additionalProperties: false
+
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 6819cde050df..0407e45eb8c4 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -94,6 +94,8 @@ required:
- interrupt-names
- clocks
+additionalProperties: false
+
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index afde81be3c29..f5401cc8de4a 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -115,6 +115,8 @@ required:
- clocks
- clock-names
+additionalProperties: false
+
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index f4dfa6fc724c..665c6e3b31d3 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -36,6 +36,8 @@ required:
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
rotator@12810000 {
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 2a9822075b36..154bee851139 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -47,6 +47,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 6a742a51e2f9..44a63fffb4be 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -87,6 +87,8 @@ required:
- reg
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
index 5d42e1304202..e8feee38c76c 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -32,6 +32,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 168235ad5d81..3f043e943668 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -76,6 +76,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
index c1c6d6f223cf..8723a336229e 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -36,6 +36,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 9acde6d2e2d9..a67ba67dab51 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -67,6 +67,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index 91ab9c842273..77605f17901c 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -53,6 +53,8 @@ required:
- dout-gpios
- avdd-supply
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 59009997dca0..118809a03279 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -32,6 +32,8 @@ required:
- vref-supply
- reg
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 0ce290473fb0..8ffeceb6abae 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -52,6 +52,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index acf36eef728b..b1627441a0b2 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -69,6 +69,8 @@ required:
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
patternProperties:
"^filter@[0-9]+$":
type: object
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
index 19e53930ebf6..1fe561574019 100644
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -38,6 +38,8 @@ required:
- compatible
- vcc-supply
+additionalProperties: false
+
examples:
- |
serial {
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
index 50a50a0d7070..a93d1972a5c2 100644
--- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
@@ -24,6 +24,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index a285eaba7125..e51a585bd5a3 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -34,6 +34,8 @@ required:
- reg
- vref-supply
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
index 69bd5c06319d..d7d14f2f1c20 100644
--- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
+++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
@@ -28,6 +28,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1cc60d7ecfa0..1a88b3c253d5 100644
--- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -28,6 +28,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
index cbb00be8f359..0ea278b07d1c 100644
--- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
@@ -38,6 +38,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
index 17e7f140b69b..fe7bfe1adbda 100644
--- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
+++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
@@ -29,6 +29,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index aae8a6d627c9..f92bf7b2b7f0 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -30,6 +30,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
index e86ef64ecf03..7b92ba8cbb9f 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
@@ -32,6 +32,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
index ed2c3d5eadf5..e8f7d1ada57b 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -62,6 +62,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
index 0ff9b11f9d18..fb19a2d7a849 100644
--- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -45,6 +45,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 9f5ca9c42025..64c18f1693f0 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -33,6 +33,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 5d4aec0e0d24..49257f9251e8 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -52,6 +52,8 @@ required:
- vddd-supply
- vdda-supply
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index 4e80ea7c1475..7ac5eb7560e0 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -56,6 +56,8 @@ required:
- trig-gpios
- echo-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
index a079c9921af6..ada55f186f3c 100644
--- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -42,6 +42,8 @@ required:
- compatible
- ping-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index d4922f9f0376..acc030c1b20e 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -398,6 +398,8 @@ required:
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index b98bf9363c8f..2384465eaa19 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -26,6 +26,8 @@ required:
- compatible
- enable-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 2f2e0b6ebbbd..3a2ad6ec64db 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -33,3 +33,6 @@ properties:
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index 507c141ea760..ccc507f384d2 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -44,6 +44,8 @@ required:
- interrupt-controller
- '#interrupt-cells'
+additionalProperties: false
+
examples:
- |
intcon: interrupt-controller@c8003000 {
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index 7cdd3aaa2ba4..0e33cd9e010e 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -80,6 +80,8 @@ required:
- clock-names
- "#iommu-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
index 8c43f1e1bf7d..c6f96cabd4d1 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -49,3 +49,6 @@ required:
- compatible
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index b50f4bcc98f1..90edf9d33b33 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -50,3 +50,6 @@ patternProperties:
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index 319280563648..aa2b3bf56b57 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -41,6 +41,8 @@ required:
- interrupts
- "#mbox-cells"
+additionalProperties: false
+
examples:
- |
mailbox@c883c404 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 335717e15970..37d77e065491 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -124,6 +124,8 @@ required:
- amlogic,ao-sysctrl
- amlogic,canvas
+additionalProperties: false
+
examples:
- |
vdec: video-decoder@c8820000 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index e8ce37fcbfec..95ffa8bc0533 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -82,6 +82,8 @@ required:
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
cec_AO: cec@100 {
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index 8e9251a0f9ef..fcb5f13704a5 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -59,6 +59,8 @@ required:
- interrupts
- port
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 480385789394..b0a0f0d3d9d4 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -73,6 +73,8 @@ required:
- gpio-controller
- "#gpio-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 38dc4f8b0ceb..3a6a1a26e2b3 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -77,6 +77,8 @@ required:
- gpio-controller
- "#gpio-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
index 0ea21a6f70b4..38ab0499102d 100644
--- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -38,6 +38,8 @@ required:
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index b9e9696da5be..976f139bb66e 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -167,6 +167,8 @@ required:
- '#address-cells'
- '#size-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
index e5922b427342..c03b83103e87 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
@@ -34,6 +34,8 @@ required:
- resets
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/sun50i-h6-ccu.h>
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
index 346f9c35427c..453c083cf44c 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
@@ -44,6 +44,8 @@ required:
- reset-names
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
phy@46000 {
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 0ccee64c6962..9a346d6290d9 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -40,6 +40,8 @@ required:
- reg
- clocks
+additionalProperties: false
+
examples:
- |
sysconf: chiptop@e0200000 {
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
index 5ab436189f3b..00609ace677c 100644
--- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -31,6 +31,8 @@ required:
- reset-gpios
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 452cee1aed32..fd1982c56104 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -159,6 +159,8 @@ required:
- "#reset-cells"
- ranges
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/soc/ti,sci_pm_domain.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 135c7dfbc180..7651a675ab2d 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -57,6 +57,8 @@ patternProperties:
required:
- compatible
+additionalProperties: false
+
examples:
- |
syscon: scu@1e6e2000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 824f7fd1d51b..36feaf5e2dff 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -70,6 +70,8 @@ required:
- compatible
- aspeed,external-nodes
+additionalProperties: false
+
examples:
- |
apb {
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ac8d1c30a8ed..45af29bc3202 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -92,6 +92,8 @@ patternProperties:
required:
- compatible
+additionalProperties: false
+
examples:
- |
syscon: scu@1e6e2000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index ef4de32cb17c..46a0478cb924 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -194,6 +194,8 @@ required:
- ranges
- pins-are-numbered
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index d3098c924b25..6c6079fe1351 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -68,6 +68,8 @@ required:
- "#power-domain-cells"
- amlogic,ao-sysctrl
+additionalProperties: false
+
examples:
- |
pwrc: power-controller {
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
index 520e07e6f21b..3412fe7e1e80 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -41,6 +41,8 @@ required:
- regmap
- offset
+additionalProperties: false
+
allOf:
- if:
not:
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index d38006b1f1f4..b80772cb9f06 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -41,6 +41,8 @@ required:
- regmap
- offset
+additionalProperties: false
+
allOf:
- if:
not:
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
index deef010ec535..62eeddb65aed 100644
--- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -32,3 +32,6 @@ properties:
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
index 9e21b83d717e..239b49fad805 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -55,6 +55,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c@1 {
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 50690487edc8..ce0a4021ae7f 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -29,3 +29,6 @@ patternProperties:
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index b3f57d81f007..92922d3afd14 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -29,6 +29,8 @@ required:
- reg
- "#reset-cells"
+additionalProperties: false
+
examples:
- |
reset-controller@c884404 {
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
index 411bd76f1b64..512a33bdb208 100644
--- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -28,6 +28,8 @@ required:
- reg
- "#reset-cells"
+additionalProperties: false
+
examples:
- |
reset-controller@8b2c800 {
diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
index a9ff3cb35c5e..444be32a8a29 100644
--- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
@@ -29,6 +29,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
rng@c8834000 {
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
index 42d9a38e4e1a..89ab67f20a7f 100644
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
@@ -35,6 +35,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
rng {
diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
index dcff573cbdb1..b95cb017f469 100644
--- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
@@ -51,6 +51,8 @@ required:
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/r7s72100-clock.h>
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 0a54296d7218..48c6cafca90c 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -111,6 +111,8 @@ required:
- clocks
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/mfd/stm32f4-rcc.h>
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 214fe8beddc3..d4178ab0d675 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -62,6 +62,8 @@ required:
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
serial@84c0 {
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index f548594d020b..cb008fd188d8 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -40,6 +40,8 @@ required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
canvas: video-lut@48 {
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 75e0cbe6be70..76ee695097bf 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -59,6 +59,8 @@ required:
- iovdd-supply
- dvdd-supply
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 38eaf0c028f9..a495d5fc0d23 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -139,6 +139,8 @@ required:
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
codec@1,0{
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
index 140a37fc3c0b..d1b65554e681 100644
--- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -63,6 +63,8 @@ required:
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
sh_fsi2: sound@ec230000 {
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index c6b244352d05..8ff2d39e7d17 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -69,6 +69,8 @@ required:
- cpu
- codec
+additionalProperties: false
+
examples:
- |
sound {
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index 53e3bad4178c..b2ad093d94df 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -115,6 +115,8 @@ required:
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/exynos-audss-clk.h>
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 469cec133647..930188bc5e6a 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -56,6 +56,8 @@ required:
- '#size-cells'
- ranges
+additionalProperties: false
+
patternProperties:
"-sram@[0-9a-f]+$":
type: object
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index 93fe7b10a82e..e43ec50bda37 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -42,6 +42,8 @@ required:
- clocks
- amlogic,ao-secure
+additionalProperties: false
+
examples:
- |
cpu_temp: temperature-sensor@ff634800 {
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index 6deead07728e..fa255672e8e5 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -82,6 +82,8 @@ properties:
required:
- compatible
+additionalProperties: false
+
oneOf:
- required:
- interrupts
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index f7ef6646bade..582bbef62b95 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -95,6 +95,8 @@ required:
- '#address-cells'
- '#size-cells'
+additionalProperties: false
+
examples:
- |
timer@f0000000 {
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
index 21c24a8e28fd..4956c8f409d2 100644
--- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
@@ -35,6 +35,8 @@ required:
- reg
- clocks
+additionalProperties: false
+
examples:
- |
timer@2c000600 {
diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
index 2807225db902..1a721d8af67a 100644
--- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
@@ -32,6 +32,8 @@ required:
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 273e359854dd..37bd01a62c52 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -52,6 +52,8 @@ required:
- interrupts
- reg
+additionalProperties: false
+
examples:
- |
// In this example, the IP contains two local timers, using separate
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 51d1f6e43c02..bcae5f9b1d7f 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -369,4 +369,6 @@ required:
- compatible
- reg
+additionalProperties: false
+
...
--
2.20.1
The regex for child nodes doesn't match the example. This wasn't flagged
with 'additionalProperties: false' missing. The child node schema was also
incorrect with 'ranges' property as it applies to child nodes and should
be moved up to the parent node.
Fixes: 957fd69d396b ("dt-bindings: soc: qcom: add On Chip MEMory (OCMEM) bindings")
Cc: Brian Masney <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/sram/qcom,ocmem.yaml | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 222990f9923c..469cec133647 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -43,6 +43,9 @@ properties:
'#size-cells':
const: 1
+ ranges:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -51,9 +54,10 @@ required:
- clock-names
- '#address-cells'
- '#size-cells'
+ - ranges
patternProperties:
- "^.+-sram$":
+ "-sram@[0-9a-f]+$":
type: object
description: A region of reserved memory.
@@ -61,12 +65,8 @@ patternProperties:
reg:
maxItems: 1
- ranges:
- maxItems: 1
-
required:
- reg
- - ranges
examples:
- |
@@ -88,9 +88,9 @@ examples:
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0 0xfec00000 0x100000>;
gmu-sram@0 {
reg = <0x0 0x100000>;
- ranges = <0 0 0xfec00000 0x100000>;
};
};
--
2.20.1
Numerous schemas are missing 'additionalProperties: false' statements which
ensures a binding doesn't have any extra undocumented properties or child
nodes. Fixing this reveals various missing properties, so let's fix all
those occurrences.
Cc: Stephen Boyd <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Bartosz Golaszewski <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Hartmut Knaack <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Peter Meerwald-Stadler <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Guillaume La Roque <[email protected]>
Cc: Zhang Rui <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/clock/fsl,plldig.yaml | 3 +++
.../gpio/socionext,uniphier-gpio.yaml | 2 ++
.../bindings/gpu/arm,mali-bifrost.yaml | 6 ++---
.../bindings/gpu/arm,mali-midgard.yaml | 3 +++
.../bindings/iio/adc/adi,ad7192.yaml | 1 -
.../bindings/iio/pressure/bmp085.yaml | 3 +++
.../media/amlogic,meson-gx-ao-cec.yaml | 9 +++++---
.../bindings/mfd/rohm,bd71828-pmic.yaml | 3 +++
.../bindings/net/ti,cpsw-switch.yaml | 23 ++++++++++++-------
.../regulator/max77650-regulator.yaml | 2 +-
.../bindings/thermal/amlogic,thermal.yaml | 2 ++
.../bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
12 files changed, 43 insertions(+), 16 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index c8350030b374..d1c040228cf7 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -21,6 +21,9 @@ properties:
reg:
maxItems: 1
+ clocks:
+ maxItems: 1
+
'#clock-cells':
const: 0
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index 580a39e09d39..c58ff9a94f45 100644
--- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -41,6 +41,8 @@ properties:
minimum: 0
maximum: 512
+ gpio-ranges: true
+
gpio-ranges-group-names:
$ref: /schemas/types.yaml#/definitions/string-array
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index e8b99adcb1bd..05fd9a404ff7 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -43,6 +43,9 @@ properties:
operating-points-v2: true
+ resets:
+ maxItems: 2
+
required:
- compatible
- reg
@@ -57,9 +60,6 @@ allOf:
contains:
const: amlogic,meson-g12a-mali
then:
- properties:
- resets:
- minItems: 2
required:
- resets
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 8d966f3ff3db..6819cde050df 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -75,6 +75,9 @@ properties:
mali-supply: true
+ power-domains:
+ maxItems: 1
+
resets:
minItems: 1
maxItems: 2
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 84d25bd39488..d0913034b1d8 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -106,7 +106,6 @@ examples:
spi-cpha;
clocks = <&ad7192_mclk>;
clock-names = "mclk";
- #interrupt-cells = <2>;
interrupts = <25 0x2>;
interrupt-parent = <&gpio>;
dvdd-supply = <&dvdd>;
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 519137e5c170..5d4aec0e0d24 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -25,6 +25,9 @@ properties:
- bosch,bmp280
- bosch,bme280
+ reg:
+ maxItems: 1
+
vddd-supply:
description:
digital voltage regulator (see regulator/regulator.txt)
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index 41197578f19a..e8ce37fcbfec 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -24,6 +24,12 @@ properties:
reg:
maxItems: 1
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
interrupts:
maxItems: 1
@@ -47,7 +53,6 @@ allOf:
- description: AO-CEC clock
clock-names:
- maxItems: 1
items:
- const: core
@@ -66,7 +71,6 @@ allOf:
- description: AO-CEC clock generator source
clock-names:
- maxItems: 1
items:
- const: oscin
@@ -88,4 +92,3 @@ examples:
clock-names = "core";
hdmi-phandle = <&hdmi_tx>;
};
-
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 4fbb9e734284..38dc4f8b0ceb 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -41,6 +41,9 @@ properties:
"#clock-cells":
const: 0
+ clock-output-names:
+ const: bd71828-32k-out
+
rohm,charger-sense-resistor-ohms:
minimum: 10000000
maximum: 50000000
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index ac8c76369a86..b9e9696da5be 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -37,6 +37,12 @@ properties:
description:
The physical base address and size of full the CPSW module IO range
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
ranges: true
clocks:
@@ -111,13 +117,6 @@ properties:
- reg
- phys
- mdio:
- type: object
- allOf:
- - $ref: "ti,davinci-mdio.yaml#"
- description:
- CPSW MDIO bus.
-
cpts:
type: object
description:
@@ -148,6 +147,15 @@ properties:
- clocks
- clock-names
+patternProperties:
+ "^mdio@":
+ type: object
+ allOf:
+ - $ref: "ti,davinci-mdio.yaml#"
+ description:
+ CPSW MDIO bus.
+
+
required:
- compatible
- reg
@@ -174,7 +182,6 @@ examples:
#address-cells = <1>;
#size-cells = <1>;
syscon = <&scm_conf>;
- inctrl-names = "default", "sleep";
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 7d724159f890..50690487edc8 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -24,7 +24,7 @@ properties:
const: maxim,max77650-regulator
patternProperties:
- "^regulator@[0-3]$":
+ "^regulator-(ldo|sbb[0-2])$":
$ref: "regulator.yaml#"
required:
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index f761681e4c0d..93fe7b10a82e 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -32,6 +32,8 @@ properties:
description: phandle to the ao-secure syscon
$ref: '/schemas/types.yaml#/definitions/phandle'
+ '#thermal-sensor-cells':
+ const: 0
required:
- compatible
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 102f319833d9..f7ef6646bade 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -32,6 +32,8 @@ properties:
'#size-cells':
const: 1
+ ranges: true
+
clock-frequency:
description: The frequency of the main counter, in Hz. Should be present
only where necessary to work around broken firmware which does not configure
--
2.20.1
On Wed, Mar 25, 2020 at 04:05:41PM -0600, Rob Herring wrote:
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
Acked-by: Mark Brown <[email protected]>
On Wed, Mar 25, 2020 at 04:05:39PM -0600, Rob Herring wrote:
> The regex for child nodes doesn't match the example. This wasn't flagged
> with 'additionalProperties: false' missing. The child node schema was also
> incorrect with 'ranges' property as it applies to child nodes and should
> be moved up to the parent node.
>
> Fixes: 957fd69d396b ("dt-bindings: soc: qcom: add On Chip MEMory (OCMEM) bindings")
> Cc: Brian Masney <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Brian Masney <[email protected]>
On Wed, 2020-03-25 at 16:05 -0600, Rob Herring wrote:
> [External]
>
> The 'adi,adxl345' definition is a duplicate as there's a full binding in:
> Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
>
> The trivial-devices binding doesn't capture that 'adi,adxl346' has a
> fallback compatible 'adi,adxl345', so let's add it to adi,adxl345.yaml.
>
Acked-by: Alexandru Ardelean <[email protected]>
> Cc: Michael Hennerich <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 10 +++++++---
> Documentation/devicetree/bindings/trivial-devices.yaml | 4 ----
> 2 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index c602b6fe1c0c..d124eba1ce54 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -17,9 +17,13 @@ description: |
>
> properties:
> compatible:
> - enum:
> - - adi,adxl345
> - - adi,adxl375
> + oneOf:
> + - items:
> + - const: adi,adxl346
> + - const: adi,adxl345
> + - enum:
> + - adi,adxl345
> + - adi,adxl375
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml
> b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 978de7d37c66..51d1f6e43c02 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -42,10 +42,6 @@ properties:
> - adi,adt7476
> # +/-1C TDM Extended Temp Range I.C
> - adi,adt7490
> - # Three-Axis Digital Accelerometer
> - - adi,adxl345
> - # Three-Axis Digital Accelerometer (backward-compatibility value
> "adi,adxl345" must be listed too)
> - - adi,adxl346
> # AMS iAQ-Core VOC Sensor
> - ams,iaq-core
> # i2c serial eeprom (24cxx)
On Wed, 2020-03-25 at 16:05 -0600, Rob Herring wrote:
> Numerous schemas are missing 'additionalProperties: false' statements which
> ensures a binding doesn't have any extra undocumented properties or child
> nodes. Fixing this reveals various missing properties, so let's fix all
> those occurrences.
>
For 'bindings/iio/adc/adi,ad7192.yaml'
Acked-by: Alexandru Ardelean <[email protected]>
> Cc: Stephen Boyd <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Guillaume La Roque <[email protected]>
> Cc: Zhang Rui <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/clock/fsl,plldig.yaml | 3 +++
> .../gpio/socionext,uniphier-gpio.yaml | 2 ++
> .../bindings/gpu/arm,mali-bifrost.yaml | 6 ++---
> .../bindings/gpu/arm,mali-midgard.yaml | 3 +++
> .../bindings/iio/adc/adi,ad7192.yaml | 1 -
> .../bindings/iio/pressure/bmp085.yaml | 3 +++
> .../media/amlogic,meson-gx-ao-cec.yaml | 9 +++++---
> .../bindings/mfd/rohm,bd71828-pmic.yaml | 3 +++
> .../bindings/net/ti,cpsw-switch.yaml | 23 ++++++++++++-------
> .../regulator/max77650-regulator.yaml | 2 +-
> .../bindings/thermal/amlogic,thermal.yaml | 2 ++
> .../bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> 12 files changed, 43 insertions(+), 16 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> index c8350030b374..d1c040228cf7 100644
> --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> @@ -21,6 +21,9 @@ properties:
> reg:
> maxItems: 1
>
> + clocks:
> + maxItems: 1
> +
> '#clock-cells':
> const: 0
>
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-
> gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-
> gpio.yaml
> index 580a39e09d39..c58ff9a94f45 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -41,6 +41,8 @@ properties:
> minimum: 0
> maximum: 512
>
> + gpio-ranges: true
> +
> gpio-ranges-group-names:
> $ref: /schemas/types.yaml#/definitions/string-array
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> index e8b99adcb1bd..05fd9a404ff7 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> @@ -43,6 +43,9 @@ properties:
>
> operating-points-v2: true
>
> + resets:
> + maxItems: 2
> +
> required:
> - compatible
> - reg
> @@ -57,9 +60,6 @@ allOf:
> contains:
> const: amlogic,meson-g12a-mali
> then:
> - properties:
> - resets:
> - minItems: 2
> required:
> - resets
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> index 8d966f3ff3db..6819cde050df 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> @@ -75,6 +75,9 @@ properties:
>
> mali-supply: true
>
> + power-domains:
> + maxItems: 1
> +
> resets:
> minItems: 1
> maxItems: 2
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> index 84d25bd39488..d0913034b1d8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> @@ -106,7 +106,6 @@ examples:
> spi-cpha;
> clocks = <&ad7192_mclk>;
> clock-names = "mclk";
> - #interrupt-cells = <2>;
> interrupts = <25 0x2>;
> interrupt-parent = <&gpio>;
> dvdd-supply = <&dvdd>;
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index 519137e5c170..5d4aec0e0d24 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -25,6 +25,9 @@ properties:
> - bosch,bmp280
> - bosch,bme280
>
> + reg:
> + maxItems: 1
> +
> vddd-supply:
> description:
> digital voltage regulator (see regulator/regulator.txt)
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-
> cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-
> cec.yaml
> index 41197578f19a..e8ce37fcbfec 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> @@ -24,6 +24,12 @@ properties:
> reg:
> maxItems: 1
>
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + maxItems: 1
> +
> interrupts:
> maxItems: 1
>
> @@ -47,7 +53,6 @@ allOf:
> - description: AO-CEC clock
>
> clock-names:
> - maxItems: 1
> items:
> - const: core
>
> @@ -66,7 +71,6 @@ allOf:
> - description: AO-CEC clock generator source
>
> clock-names:
> - maxItems: 1
> items:
> - const: oscin
>
> @@ -88,4 +92,3 @@ examples:
> clock-names = "core";
> hdmi-phandle = <&hdmi_tx>;
> };
> -
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> index 4fbb9e734284..38dc4f8b0ceb 100644
> --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> @@ -41,6 +41,9 @@ properties:
> "#clock-cells":
> const: 0
>
> + clock-output-names:
> + const: bd71828-32k-out
> +
> rohm,charger-sense-resistor-ohms:
> minimum: 10000000
> maximum: 50000000
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index ac8c76369a86..b9e9696da5be 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -37,6 +37,12 @@ properties:
> description:
> The physical base address and size of full the CPSW module IO range
>
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> ranges: true
>
> clocks:
> @@ -111,13 +117,6 @@ properties:
> - reg
> - phys
>
> - mdio:
> - type: object
> - allOf:
> - - $ref: "ti,davinci-mdio.yaml#"
> - description:
> - CPSW MDIO bus.
> -
> cpts:
> type: object
> description:
> @@ -148,6 +147,15 @@ properties:
> - clocks
> - clock-names
>
> +patternProperties:
> + "^mdio@":
> + type: object
> + allOf:
> + - $ref: "ti,davinci-mdio.yaml#"
> + description:
> + CPSW MDIO bus.
> +
> +
> required:
> - compatible
> - reg
> @@ -174,7 +182,6 @@ examples:
> #address-cells = <1>;
> #size-cells = <1>;
> syscon = <&scm_conf>;
> - inctrl-names = "default", "sleep";
>
> interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/Documentation/devicetree/bindings/regulator/max77650-
> regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-
> regulator.yaml
> index 7d724159f890..50690487edc8 100644
> --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> @@ -24,7 +24,7 @@ properties:
> const: maxim,max77650-regulator
>
> patternProperties:
> - "^regulator@[0-3]$":
> + "^regulator-(ldo|sbb[0-2])$":
> $ref: "regulator.yaml#"
>
> required:
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> index f761681e4c0d..93fe7b10a82e 100644
> --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -32,6 +32,8 @@ properties:
> description: phandle to the ao-secure syscon
> $ref: '/schemas/types.yaml#/definitions/phandle'
>
> + '#thermal-sensor-cells':
> + const: 0
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> index 102f319833d9..f7ef6646bade 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> @@ -32,6 +32,8 @@ properties:
> '#size-cells':
> const: 1
>
> + ranges: true
> +
> clock-frequency:
> description: The frequency of the main counter, in Hz. Should be present
> only where necessary to work around broken firmware which does not
> configure
On Wed, 2020-03-25 at 16:05 -0600, Rob Herring wrote:
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
>
> So let's stick with the json-schema defined default and add
> 'additionalProperties: false' where needed. This will be a continual
> review comment and game of wack-a-mole.
For
Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
.../devicetree/bindings/iio/temperature/adi,ltc2983.yaml
Documentation/devicetree/bindings/sound/adi,adau7118.yaml
[also, if i missed any, also for any other ADI or LTC bindings]
Acked-by: Alexandru Ardelean <[email protected]>
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++
> .../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
> Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++
> Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++
> .../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++
> Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
> .../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++
> .../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
> Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
> .../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
> .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
> Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
> Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
> .../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++
> .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
> Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
> .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++
> Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++
> .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
> Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++
> .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
> Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++
> Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++
> .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++
> Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++
> Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++
> Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++
> .../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
> Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
> .../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
> Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++
> .../bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++
> Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 2 ++
> .../devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++
> .../bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++
> .../devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++
> .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-poweroff.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-reboot.yaml | 2 ++
> .../devicetree/bindings/power/supply/max77650-charger.yaml | 3 +++
> Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++
> .../devicetree/bindings/regulator/max77650-regulator.yaml | 3 +++
> .../devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++
> .../bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++
> Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++
> Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++
> .../devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++
> .../devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
> Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 ++
> Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml | 2 ++
> Documentation/devicetree/bindings/sound/renesas,fsi.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung,odroid.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung-i2s.yaml | 2 ++
> Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 2 ++
> Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 2 ++
> .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,global_timer.yaml | 2 ++
> .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 2 ++
> .../devicetree/bindings/timer/samsung,exynos4210-mct.yaml | 2 ++
> Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
> 117 files changed, 240 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-
> manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-
> manager.yaml
> index e4131fa42b26..572381306681 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> @@ -21,6 +21,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> clkmgr@ffd04000 {
> diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-
> ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-
> gx-ao-secure.yaml
> index 853d7d2b56f5..66213bd95e6e 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-
> secure.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-
> secure.yaml
> @@ -43,6 +43,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> ao-secure@140 {
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> index 79902f470e4b..c3a8604dfa80 100644
> --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> @@ -43,6 +43,8 @@ required:
> - reg-names
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> index 7f8d17f33983..dd087643a9f8 100644
> --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> @@ -27,6 +27,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> prr: chipid@ff000044 {
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> index afcd70803c12..0425d333b50d 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> @@ -30,6 +30,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> chipid@10000000 {
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> index 73b56fc5bf58..c9651892710e 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -89,6 +89,8 @@ required:
> - clock-names
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos5250.h>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-
> firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-
> firmware.yaml
> index 51d23b6f8a94..3d9abad3c749 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-
> firmware.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-
> firmware.yaml
> @@ -23,6 +23,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> firmware@203f000 {
> diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> index 0dedf94c8578..baff80197d5a 100644
> --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> @@ -29,6 +29,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/stm32mp1-clks.h>
> diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> index d1c040228cf7..a203d5d498db 100644
> --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> @@ -44,6 +44,8 @@ required:
> - clocks
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Display PIXEL Clock node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> index cd0b8a341321..03386b0861a2 100644
> --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> @@ -52,6 +52,8 @@ required:
> - clock-names
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock Control Module node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> index 89aee63c9019..4351a1dbb4f7 100644
> --- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> @@ -52,6 +52,8 @@ required:
> - clock-names
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock Control Module node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> index f0b804a7f096..0e8b07710451 100644
> --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> @@ -35,6 +35,8 @@ required:
> - clocks
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock controller node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> index 3647007f82ca..eacccc88bbf6 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> @@ -68,6 +68,8 @@ required:
> - nvmem-cell-names
> - '#thermal-sensor-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@900000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> index 89c6e070e7ac..98572b4a9b60 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> @@ -40,6 +40,8 @@ required:
> - '#clock-cells'
> - '#reset-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@1800000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> index 18e4e77b8cfa..5a5b2214f0ca 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> @@ -56,6 +56,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@300000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> index 1d3cae980471..a0bb713929b0 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> @@ -66,6 +66,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmcc.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> index 8cdece395eba..ce06f3f8c3e3 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> @@ -40,6 +40,8 @@ required:
> - '#clock-cells'
> - '#reset-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@1800000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> index ee4f968e2909..a345320e0e49 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> @@ -58,6 +58,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> index 888e9a708390..36f3b3668ced 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> @@ -56,6 +56,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index d18f8ab9eeee..e533bb0cfd2b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -74,6 +74,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> # Example for GCC for MSM8960:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> index 85518494ce43..f684fe67db84 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> @@ -74,6 +74,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> index 7d853c1a85e5..d747bb58f0a7 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> @@ -50,6 +50,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-msm8998.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> index 2cd158f13bab..c9fd748b4d7c 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Example for GCC for SDM845: The below node should be defined inside
> # &apps_rsc node.
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> index 0429062f1585..58cdfd5924d3 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> @@ -58,6 +58,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> index 5785192cc4be..8635e35fd3f0 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> @@ -52,6 +52,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> index 31df901884ac..0071b9701960 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> @@ -48,6 +48,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> index 89269ddfbdcd..ad47d747a3e4 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> @@ -67,6 +67,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> index bac04f1c5d79..7a052ac5dc00 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> @@ -52,6 +52,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> index 9d216c0f11d4..2a6a81ab0318 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> @@ -48,6 +48,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> index d1205a6697a0..d8e573eeb5ec 100644
> --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> @@ -107,6 +107,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> vpu: vpu@d0100000 {
> diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> index 2ca3ddbe1ff4..e7f2ad7dab5e 100644
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -43,6 +43,8 @@ required:
> - interrupts
> - '#dma-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> dma@3000000 {
> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> index f04870d84542..a5dc070d0ca7 100644
> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> @@ -68,6 +68,8 @@ required:
> - mbox-names
> - memory-region
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/firmware/imx/rsrc.h>
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml
> b/Documentation/devicetree/bindings/eeprom/at24.yaml
> index 0f6d8db18d6c..a15787e504f0 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.yaml
> +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
> @@ -172,6 +172,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-
> processing-engine.yaml
> b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-
> engine.yaml
> index 878a2079ebb6..1bd2870c3a9c 100644
> --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-
> processing-engine.yaml
> +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-
> processing-engine.yaml
> @@ -34,9 +34,12 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> npe@c8006000 {
> compatible = "intel,ixp4xx-network-processing-engine";
> reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
> };
> +...
> diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> index 64e279a4bc10..5f1ed20e43ee 100644
> --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> @@ -47,6 +47,8 @@ required:
> - "#gpio-cells"
> - gpio-controller
>
> +additionalProperties: false
> +
> dependencies:
> interrupt-controller: [ interrupts ]
>
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-
> gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-
> gpio.yaml
> index c58ff9a94f45..1a54db04f29d 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -64,6 +64,8 @@ required:
> - gpio-ranges
> - socionext,interrupt-ranges
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> index d102888c1be7..a36aec27069c 100644
> --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> @@ -49,6 +49,8 @@ required:
> - "#gpio-cells"
> - gpio-controller
>
> +additionalProperties: false
> +
> examples:
> - |
> logicvc: logicvc@43c00000 {
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> index 05fd9a404ff7..0b229a7d4a98 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> @@ -53,6 +53,8 @@ required:
> - interrupt-names
> - clocks
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> index 6819cde050df..0407e45eb8c4 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> @@ -94,6 +94,8 @@ required:
> - interrupt-names
> - clocks
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> index afde81be3c29..f5401cc8de4a 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> @@ -115,6 +115,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> index f4dfa6fc724c..665c6e3b31d3 100644
> --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> @@ -36,6 +36,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> rotator@12810000 {
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> index 2a9822075b36..154bee851139 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -47,6 +47,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> index 6a742a51e2f9..44a63fffb4be 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> @@ -87,6 +87,8 @@ required:
> - reg
>
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> index 5d42e1304202..e8feee38c76c 100644
> --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> @@ -32,6 +32,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 168235ad5d81..3f043e943668 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -76,6 +76,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> index c1c6d6f223cf..8723a336229e 100644
> --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> @@ -36,6 +36,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> index 9acde6d2e2d9..a67ba67dab51 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> @@ -67,6 +67,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> index 91ab9c842273..77605f17901c 100644
> --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> @@ -53,6 +53,8 @@ required:
> - dout-gpios
> - avdd-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> index 59009997dca0..118809a03279 100644
> --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> @@ -32,6 +32,8 @@ required:
> - vref-supply
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> index 0ce290473fb0..8ffeceb6abae 100644
> --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -52,6 +52,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index acf36eef728b..b1627441a0b2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -69,6 +69,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> patternProperties:
> "^filter@[0-9]+$":
> type: object
> diff --git
> a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> index 19e53930ebf6..1fe561574019 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> @@ -38,6 +38,8 @@ required:
> - compatible
> - vcc-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> serial {
> diff --git
> a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> index 50a50a0d7070..a93d1972a5c2 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> @@ -24,6 +24,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> index a285eaba7125..e51a585bd5a3 100644
> --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> @@ -34,6 +34,8 @@ required:
> - reg
> - vref-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> index 69bd5c06319d..d7d14f2f1c20 100644
> --- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> @@ -28,6 +28,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> index 1cc60d7ecfa0..1a88b3c253d5 100644
> --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> @@ -28,6 +28,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> index cbb00be8f359..0ea278b07d1c 100644
> --- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> @@ -38,6 +38,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> index 17e7f140b69b..fe7bfe1adbda 100644
> --- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> @@ -29,6 +29,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> index aae8a6d627c9..f92bf7b2b7f0 100644
> --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> @@ -30,6 +30,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> index e86ef64ecf03..7b92ba8cbb9f 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> @@ -32,6 +32,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> index ed2c3d5eadf5..e8f7d1ada57b 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> @@ -62,6 +62,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> index 0ff9b11f9d18..fb19a2d7a849 100644
> --- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> @@ -45,6 +45,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 9f5ca9c42025..64c18f1693f0 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -33,6 +33,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index 5d4aec0e0d24..49257f9251e8 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -52,6 +52,8 @@ required:
> - vddd-supply
> - vdda-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-
> srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-
> srf04.yaml
> index 4e80ea7c1475..7ac5eb7560e0 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -56,6 +56,8 @@ required:
> - trig-gpios
> - echo-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-
> ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> index a079c9921af6..ada55f186f3c 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> @@ -42,6 +42,8 @@ required:
> - compatible
> - ping-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git
> a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index d4922f9f0376..acc030c1b20e 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -398,6 +398,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> index b98bf9363c8f..2384465eaa19 100644
> --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> @@ -26,6 +26,8 @@ required:
> - compatible
> - enable-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> index 2f2e0b6ebbbd..3a2ad6ec64db 100644
> --- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> +++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> @@ -33,3 +33,6 @@ properties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/interrupt-
> controller/intel,ixp4xx-interrupt.yaml
> b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-
> interrupt.yaml
> index 507c141ea760..ccc507f384d2 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-
> interrupt.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-
> interrupt.yaml
> @@ -44,6 +44,8 @@ required:
> - interrupt-controller
> - '#interrupt-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> intcon: interrupt-controller@c8003000 {
> diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> index 7cdd3aaa2ba4..0e33cd9e010e 100644
> --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> @@ -80,6 +80,8 @@ required:
> - clock-names
> - "#iommu-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos5250.h>
> diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> index 8c43f1e1bf7d..c6f96cabd4d1 100644
> --- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> @@ -49,3 +49,6 @@ required:
> - compatible
> - "#address-cells"
> - "#size-cells"
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> index b50f4bcc98f1..90edf9d33b33 100644
> --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> @@ -50,3 +50,6 @@ patternProperties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-
> mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-
> mhu.yaml
> index 319280563648..aa2b3bf56b57 100644
> --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> @@ -41,6 +41,8 @@ required:
> - interrupts
> - "#mbox-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> mailbox@c883c404 {
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 335717e15970..37d77e065491 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -124,6 +124,8 @@ required:
> - amlogic,ao-sysctrl
> - amlogic,canvas
>
> +additionalProperties: false
> +
> examples:
> - |
> vdec: video-decoder@c8820000 {
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-
> cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-
> cec.yaml
> index e8ce37fcbfec..95ffa8bc0533 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> @@ -82,6 +82,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> cec_AO: cec@100 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> index 8e9251a0f9ef..fcb5f13704a5 100644
> --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> @@ -59,6 +59,8 @@ required:
> - interrupts
> - port
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml
> b/Documentation/devicetree/bindings/mfd/max77650.yaml
> index 480385789394..b0a0f0d3d9d4 100644
> --- a/Documentation/devicetree/bindings/mfd/max77650.yaml
> +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
> @@ -73,6 +73,8 @@ required:
> - gpio-controller
> - "#gpio-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> index 38dc4f8b0ceb..3a6a1a26e2b3 100644
> --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> @@ -77,6 +77,8 @@ required:
> - gpio-controller
> - "#gpio-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-
> manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-
> manager.yaml
> index 0ea21a6f70b4..38ab0499102d 100644
> --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-
> manager.yaml
> +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-
> manager.yaml
> @@ -38,6 +38,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index b9e9696da5be..976f139bb66e 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -167,6 +167,8 @@ required:
> - '#address-cells'
> - '#size-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-
> phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-
> phy.yaml
> index e5922b427342..c03b83103e87 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> @@ -34,6 +34,8 @@ required:
> - resets
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/sun50i-h6-ccu.h>
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-
> pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-
> pcie-phy.yaml
> index 346f9c35427c..453c083cf44c 100644
> --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-
> phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-
> phy.yaml
> @@ -44,6 +44,8 @@ required:
> - reset-names
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> phy@46000 {
> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> index 0ccee64c6962..9a346d6290d9 100644
> --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> @@ -40,6 +40,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> sysconf: chiptop@e0200000 {
> diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> index 5ab436189f3b..00609ace677c 100644
> --- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> @@ -31,6 +31,8 @@ required:
> - reset-gpios
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> index 452cee1aed32..fd1982c56104 100644
> --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> @@ -159,6 +159,8 @@ required:
> - "#reset-cells"
> - ranges
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/soc/ti,sci_pm_domain.h>
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-
> pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-
> pinctrl.yaml
> index 135c7dfbc180..7651a675ab2d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> @@ -57,6 +57,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> syscon: scu@1e6e2000 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-
> pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-
> pinctrl.yaml
> index 824f7fd1d51b..36feaf5e2dff 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> @@ -70,6 +70,8 @@ required:
> - compatible
> - aspeed,external-nodes
>
> +additionalProperties: false
> +
> examples:
> - |
> apb {
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-
> pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-
> pinctrl.yaml
> index ac8d1c30a8ed..45af29bc3202 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> @@ -92,6 +92,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> syscon: scu@1e6e2000 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> index ef4de32cb17c..46a0478cb924 100644
> --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> @@ -194,6 +194,8 @@ required:
> - ranges
> - pins-are-numbered
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/pinctrl/stm32-pinfunc.h>
> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-
> pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> index d3098c924b25..6c6079fe1351 100644
> --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> @@ -68,6 +68,8 @@ required:
> - "#power-domain-cells"
> - amlogic,ao-sysctrl
>
> +additionalProperties: false
> +
> examples:
> - |
> pwrc: power-controller {
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-
> poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-
> poweroff.yaml
> index 520e07e6f21b..3412fe7e1e80 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> @@ -41,6 +41,8 @@ required:
> - regmap
> - offset
>
> +additionalProperties: false
> +
> allOf:
> - if:
> not:
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> index d38006b1f1f4..b80772cb9f06 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> @@ -41,6 +41,8 @@ required:
> - regmap
> - offset
>
> +additionalProperties: false
> +
> allOf:
> - if:
> not:
> diff --git a/Documentation/devicetree/bindings/power/supply/max77650-
> charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-
> charger.yaml
> index deef010ec535..62eeddb65aed 100644
> --- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> @@ -32,3 +32,6 @@ properties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> index 9e21b83d717e..239b49fad805 100644
> --- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> +++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> @@ -55,6 +55,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c@1 {
> diff --git a/Documentation/devicetree/bindings/regulator/max77650-
> regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-
> regulator.yaml
> index 50690487edc8..ce0a4021ae7f 100644
> --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> @@ -29,3 +29,6 @@ patternProperties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> index b3f57d81f007..92922d3afd14 100644
> --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> @@ -29,6 +29,8 @@ required:
> - reg
> - "#reset-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> reset-controller@c884404 {
> diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-
> rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-
> rescal.yaml
> index 411bd76f1b64..512a33bdb208 100644
> --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-
> rescal.yaml
> +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-
> rescal.yaml
> @@ -28,6 +28,8 @@ required:
> - reg
> - "#reset-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> reset-controller@8b2c800 {
> diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> index a9ff3cb35c5e..444be32a8a29 100644
> --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> @@ -29,6 +29,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> rng@c8834000 {
> diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> index 42d9a38e4e1a..89ab67f20a7f 100644
> --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> rng {
> diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> index dcff573cbdb1..b95cb017f469 100644
> --- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> @@ -51,6 +51,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/r7s72100-clock.h>
> diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> index 0a54296d7218..48c6cafca90c 100644
> --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> @@ -111,6 +111,8 @@ required:
> - clocks
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/mfd/stm32f4-rcc.h>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> index 214fe8beddc3..d4178ab0d675 100644
> --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> @@ -62,6 +62,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> serial@84c0 {
> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> index f548594d020b..cb008fd188d8 100644
> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> @@ -40,6 +40,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> canvas: video-lut@48 {
> diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> index 75e0cbe6be70..76ee695097bf 100644
> --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> @@ -59,6 +59,8 @@ required:
> - iovdd-supply
> - dvdd-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> index 38eaf0c028f9..a495d5fc0d23 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> @@ -139,6 +139,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> codec@1,0{
> diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> index 140a37fc3c0b..d1b65554e681 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> @@ -63,6 +63,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> sh_fsi2: sound@ec230000 {
> diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> index c6b244352d05..8ff2d39e7d17 100644
> --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> @@ -69,6 +69,8 @@ required:
> - cpu
> - codec
>
> +additionalProperties: false
> +
> examples:
> - |
> sound {
> diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> index 53e3bad4178c..b2ad093d94df 100644
> --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> @@ -115,6 +115,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos-audss-clk.h>
> diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> index 469cec133647..930188bc5e6a 100644
> --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> @@ -56,6 +56,8 @@ required:
> - '#size-cells'
> - ranges
>
> +additionalProperties: false
> +
> patternProperties:
> "-sram@[0-9a-f]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> index 93fe7b10a82e..e43ec50bda37 100644
> --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -42,6 +42,8 @@ required:
> - clocks
> - amlogic,ao-secure
>
> +additionalProperties: false
> +
> examples:
> - |
> cpu_temp: temperature-sensor@ff634800 {
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> index 6deead07728e..fa255672e8e5 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> @@ -82,6 +82,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> oneOf:
> - required:
> - interrupts
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> index f7ef6646bade..582bbef62b95 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> @@ -95,6 +95,8 @@ required:
> - '#address-cells'
> - '#size-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> timer@f0000000 {
> diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> index 21c24a8e28fd..4956c8f409d2 100644
> --- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> @@ -35,6 +35,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> timer@2c000600 {
> diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> index 2807225db902..1a721d8af67a 100644
> --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> @@ -32,6 +32,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-
> mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> index 273e359854dd..37bd01a62c52 100644
> --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> @@ -52,6 +52,8 @@ required:
> - interrupts
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> // In this example, the IP contains two local timers, using separate
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml
> b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 51d1f6e43c02..bcae5f9b1d7f 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -369,4 +369,6 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> ...
On 25/03/2020 23:05, Rob Herring wrote:
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
>
> So let's stick with the json-schema defined default and add
> 'additionalProperties: false' where needed. This will be a continual
> review comment and game of wack-a-mole.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++
> .../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
> Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++
> Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++
> .../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++
> Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
> .../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++
> .../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
> Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
> .../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
> .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
> Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
> Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
> .../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++
> .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
> Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
> .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++
> Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++
> .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
> Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++
> .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
> Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++
> Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++
> .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++
> Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++
> Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++
> Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++
> .../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
> Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
> .../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
> Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++
> .../bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++
> Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 2 ++
> .../devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++
> .../bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++
> .../devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++
> .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-poweroff.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-reboot.yaml | 2 ++
> .../devicetree/bindings/power/supply/max77650-charger.yaml | 3 +++
> Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++
> .../devicetree/bindings/regulator/max77650-regulator.yaml | 3 +++
> .../devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++
> .../bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++
> Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++
> Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++
> .../devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++
> .../devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
> Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 ++
> Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml | 2 ++
> Documentation/devicetree/bindings/sound/renesas,fsi.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung,odroid.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung-i2s.yaml | 2 ++
> Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 2 ++
> Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 2 ++
> .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,global_timer.yaml | 2 ++
> .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 2 ++
> .../devicetree/bindings/timer/samsung,exynos4210-mct.yaml | 2 ++
> Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
> 117 files changed, 240 insertions(+)
>
For:
.../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
.../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
.../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
.../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
.../bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
.../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
.../devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++
Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++
.../devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++
.../devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++
Reviewed-by: Neil Armstrong <[email protected]>
On 25/03/2020 23:05, Rob Herring wrote:
> Numerous schemas are missing 'additionalProperties: false' statements which
> ensures a binding doesn't have any extra undocumented properties or child
> nodes. Fixing this reveals various missing properties, so let's fix all
> those occurrences.
>
> Cc: Stephen Boyd <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Guillaume La Roque <[email protected]>
> Cc: Zhang Rui <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/clock/fsl,plldig.yaml | 3 +++
> .../gpio/socionext,uniphier-gpio.yaml | 2 ++
> .../bindings/gpu/arm,mali-bifrost.yaml | 6 ++---
> .../bindings/gpu/arm,mali-midgard.yaml | 3 +++
> .../bindings/iio/adc/adi,ad7192.yaml | 1 -
> .../bindings/iio/pressure/bmp085.yaml | 3 +++
> .../media/amlogic,meson-gx-ao-cec.yaml | 9 +++++---
> .../bindings/mfd/rohm,bd71828-pmic.yaml | 3 +++
> .../bindings/net/ti,cpsw-switch.yaml | 23 ++++++++++++-------
> .../regulator/max77650-regulator.yaml | 2 +-
> .../bindings/thermal/amlogic,thermal.yaml | 2 ++
> .../bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> 12 files changed, 43 insertions(+), 16 deletions(-)
>
For:
.../bindings/gpu/arm,mali-bifrost.yaml | 6 ++---
.../bindings/gpu/arm,mali-midgard.yaml | 3 +++
.../media/amlogic,meson-gx-ao-cec.yaml | 9 +++++---
.../bindings/thermal/amlogic,thermal.yaml | 2 ++
Reviewed-by: Neil Armstrong <[email protected]>
On Wed, 25 Mar 2020 16:05:40 -0600
Rob Herring <[email protected]> wrote:
> Numerous schemas are missing 'additionalProperties: false' statements which
> ensures a binding doesn't have any extra undocumented properties or child
> nodes. Fixing this reveals various missing properties, so let's fix all
> those occurrences.
>
> Cc: Stephen Boyd <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Guillaume La Roque <[email protected]>
> Cc: Zhang Rui <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
Acked-by: Jonathan Cameron <[email protected]> #for-iio
> ---
> .../devicetree/bindings/clock/fsl,plldig.yaml | 3 +++
> .../gpio/socionext,uniphier-gpio.yaml | 2 ++
> .../bindings/gpu/arm,mali-bifrost.yaml | 6 ++---
> .../bindings/gpu/arm,mali-midgard.yaml | 3 +++
> .../bindings/iio/adc/adi,ad7192.yaml | 1 -
> .../bindings/iio/pressure/bmp085.yaml | 3 +++
> .../media/amlogic,meson-gx-ao-cec.yaml | 9 +++++---
> .../bindings/mfd/rohm,bd71828-pmic.yaml | 3 +++
> .../bindings/net/ti,cpsw-switch.yaml | 23 ++++++++++++-------
> .../regulator/max77650-regulator.yaml | 2 +-
> .../bindings/thermal/amlogic,thermal.yaml | 2 ++
> .../bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> 12 files changed, 43 insertions(+), 16 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> index c8350030b374..d1c040228cf7 100644
> --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> @@ -21,6 +21,9 @@ properties:
> reg:
> maxItems: 1
>
> + clocks:
> + maxItems: 1
> +
> '#clock-cells':
> const: 0
>
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> index 580a39e09d39..c58ff9a94f45 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -41,6 +41,8 @@ properties:
> minimum: 0
> maximum: 512
>
> + gpio-ranges: true
> +
> gpio-ranges-group-names:
> $ref: /schemas/types.yaml#/definitions/string-array
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> index e8b99adcb1bd..05fd9a404ff7 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> @@ -43,6 +43,9 @@ properties:
>
> operating-points-v2: true
>
> + resets:
> + maxItems: 2
> +
> required:
> - compatible
> - reg
> @@ -57,9 +60,6 @@ allOf:
> contains:
> const: amlogic,meson-g12a-mali
> then:
> - properties:
> - resets:
> - minItems: 2
> required:
> - resets
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> index 8d966f3ff3db..6819cde050df 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> @@ -75,6 +75,9 @@ properties:
>
> mali-supply: true
>
> + power-domains:
> + maxItems: 1
> +
> resets:
> minItems: 1
> maxItems: 2
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> index 84d25bd39488..d0913034b1d8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> @@ -106,7 +106,6 @@ examples:
> spi-cpha;
> clocks = <&ad7192_mclk>;
> clock-names = "mclk";
> - #interrupt-cells = <2>;
> interrupts = <25 0x2>;
> interrupt-parent = <&gpio>;
> dvdd-supply = <&dvdd>;
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index 519137e5c170..5d4aec0e0d24 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -25,6 +25,9 @@ properties:
> - bosch,bmp280
> - bosch,bme280
>
> + reg:
> + maxItems: 1
> +
> vddd-supply:
> description:
> digital voltage regulator (see regulator/regulator.txt)
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> index 41197578f19a..e8ce37fcbfec 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> @@ -24,6 +24,12 @@ properties:
> reg:
> maxItems: 1
>
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + maxItems: 1
> +
> interrupts:
> maxItems: 1
>
> @@ -47,7 +53,6 @@ allOf:
> - description: AO-CEC clock
>
> clock-names:
> - maxItems: 1
> items:
> - const: core
>
> @@ -66,7 +71,6 @@ allOf:
> - description: AO-CEC clock generator source
>
> clock-names:
> - maxItems: 1
> items:
> - const: oscin
>
> @@ -88,4 +92,3 @@ examples:
> clock-names = "core";
> hdmi-phandle = <&hdmi_tx>;
> };
> -
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> index 4fbb9e734284..38dc4f8b0ceb 100644
> --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> @@ -41,6 +41,9 @@ properties:
> "#clock-cells":
> const: 0
>
> + clock-output-names:
> + const: bd71828-32k-out
> +
> rohm,charger-sense-resistor-ohms:
> minimum: 10000000
> maximum: 50000000
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index ac8c76369a86..b9e9696da5be 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -37,6 +37,12 @@ properties:
> description:
> The physical base address and size of full the CPSW module IO range
>
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 1
> +
> ranges: true
>
> clocks:
> @@ -111,13 +117,6 @@ properties:
> - reg
> - phys
>
> - mdio:
> - type: object
> - allOf:
> - - $ref: "ti,davinci-mdio.yaml#"
> - description:
> - CPSW MDIO bus.
> -
> cpts:
> type: object
> description:
> @@ -148,6 +147,15 @@ properties:
> - clocks
> - clock-names
>
> +patternProperties:
> + "^mdio@":
> + type: object
> + allOf:
> + - $ref: "ti,davinci-mdio.yaml#"
> + description:
> + CPSW MDIO bus.
> +
> +
> required:
> - compatible
> - reg
> @@ -174,7 +182,6 @@ examples:
> #address-cells = <1>;
> #size-cells = <1>;
> syscon = <&scm_conf>;
> - inctrl-names = "default", "sleep";
>
> interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> index 7d724159f890..50690487edc8 100644
> --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> @@ -24,7 +24,7 @@ properties:
> const: maxim,max77650-regulator
>
> patternProperties:
> - "^regulator@[0-3]$":
> + "^regulator-(ldo|sbb[0-2])$":
> $ref: "regulator.yaml#"
>
> required:
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> index f761681e4c0d..93fe7b10a82e 100644
> --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -32,6 +32,8 @@ properties:
> description: phandle to the ao-secure syscon
> $ref: '/schemas/types.yaml#/definitions/phandle'
>
> + '#thermal-sensor-cells':
> + const: 0
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> index 102f319833d9..f7ef6646bade 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> @@ -32,6 +32,8 @@ properties:
> '#size-cells':
> const: 1
>
> + ranges: true
> +
> clock-frequency:
> description: The frequency of the main counter, in Hz. Should be present
> only where necessary to work around broken firmware which does not configure
On Wed, 25 Mar 2020 16:05:41 -0600
Rob Herring <[email protected]> wrote:
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
>
> So let's stick with the json-schema defined default and add
> 'additionalProperties: false' where needed. This will be a continual
> review comment and game of wack-a-mole.
>
> Signed-off-by: Rob Herring <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
for IIO ones.
Thanks.
> ---
> .../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++
> .../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
> Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++
> Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++
> .../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++
> Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
> .../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++
> .../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
> Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
> .../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
> .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
> Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
> Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
> .../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++
> .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
> Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
> .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++
> Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++
> .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
> Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++
> .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
> Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++
> Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++
> .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++
> Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++
> Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++
> Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++
> .../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
> Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
> .../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
> Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++
> .../bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++
> Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 2 ++
> .../devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++
> .../bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++
> .../devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++
> .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-poweroff.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-reboot.yaml | 2 ++
> .../devicetree/bindings/power/supply/max77650-charger.yaml | 3 +++
> Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++
> .../devicetree/bindings/regulator/max77650-regulator.yaml | 3 +++
> .../devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++
> .../bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++
> Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++
> Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++
> .../devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++
> .../devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
> Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 ++
> Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml | 2 ++
> Documentation/devicetree/bindings/sound/renesas,fsi.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung,odroid.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung-i2s.yaml | 2 ++
> Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 2 ++
> Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 2 ++
> .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,global_timer.yaml | 2 ++
> .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 2 ++
> .../devicetree/bindings/timer/samsung,exynos4210-mct.yaml | 2 ++
> Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
> 117 files changed, 240 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> index e4131fa42b26..572381306681 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> @@ -21,6 +21,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> clkmgr@ffd04000 {
> diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> index 853d7d2b56f5..66213bd95e6e 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> @@ -43,6 +43,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> ao-secure@140 {
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> index 79902f470e4b..c3a8604dfa80 100644
> --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> @@ -43,6 +43,8 @@ required:
> - reg-names
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> index 7f8d17f33983..dd087643a9f8 100644
> --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> @@ -27,6 +27,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> prr: chipid@ff000044 {
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> index afcd70803c12..0425d333b50d 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> @@ -30,6 +30,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> chipid@10000000 {
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> index 73b56fc5bf58..c9651892710e 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -89,6 +89,8 @@ required:
> - clock-names
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos5250.h>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
> index 51d23b6f8a94..3d9abad3c749 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
> @@ -23,6 +23,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> firmware@203f000 {
> diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> index 0dedf94c8578..baff80197d5a 100644
> --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> @@ -29,6 +29,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/stm32mp1-clks.h>
> diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> index d1c040228cf7..a203d5d498db 100644
> --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> @@ -44,6 +44,8 @@ required:
> - clocks
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Display PIXEL Clock node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> index cd0b8a341321..03386b0861a2 100644
> --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> @@ -52,6 +52,8 @@ required:
> - clock-names
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock Control Module node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> index 89aee63c9019..4351a1dbb4f7 100644
> --- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> @@ -52,6 +52,8 @@ required:
> - clock-names
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock Control Module node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> index f0b804a7f096..0e8b07710451 100644
> --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> @@ -35,6 +35,8 @@ required:
> - clocks
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock controller node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> index 3647007f82ca..eacccc88bbf6 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> @@ -68,6 +68,8 @@ required:
> - nvmem-cell-names
> - '#thermal-sensor-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@900000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> index 89c6e070e7ac..98572b4a9b60 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> @@ -40,6 +40,8 @@ required:
> - '#clock-cells'
> - '#reset-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@1800000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> index 18e4e77b8cfa..5a5b2214f0ca 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> @@ -56,6 +56,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@300000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> index 1d3cae980471..a0bb713929b0 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> @@ -66,6 +66,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmcc.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> index 8cdece395eba..ce06f3f8c3e3 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> @@ -40,6 +40,8 @@ required:
> - '#clock-cells'
> - '#reset-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@1800000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> index ee4f968e2909..a345320e0e49 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> @@ -58,6 +58,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> index 888e9a708390..36f3b3668ced 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> @@ -56,6 +56,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index d18f8ab9eeee..e533bb0cfd2b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -74,6 +74,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> # Example for GCC for MSM8960:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> index 85518494ce43..f684fe67db84 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> @@ -74,6 +74,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> index 7d853c1a85e5..d747bb58f0a7 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> @@ -50,6 +50,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-msm8998.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> index 2cd158f13bab..c9fd748b4d7c 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Example for GCC for SDM845: The below node should be defined inside
> # &apps_rsc node.
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> index 0429062f1585..58cdfd5924d3 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> @@ -58,6 +58,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> index 5785192cc4be..8635e35fd3f0 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> @@ -52,6 +52,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> index 31df901884ac..0071b9701960 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> @@ -48,6 +48,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> index 89269ddfbdcd..ad47d747a3e4 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> @@ -67,6 +67,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> index bac04f1c5d79..7a052ac5dc00 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> @@ -52,6 +52,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> index 9d216c0f11d4..2a6a81ab0318 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> @@ -48,6 +48,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> index d1205a6697a0..d8e573eeb5ec 100644
> --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> @@ -107,6 +107,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> vpu: vpu@d0100000 {
> diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> index 2ca3ddbe1ff4..e7f2ad7dab5e 100644
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -43,6 +43,8 @@ required:
> - interrupts
> - '#dma-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> dma@3000000 {
> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> index f04870d84542..a5dc070d0ca7 100644
> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> @@ -68,6 +68,8 @@ required:
> - mbox-names
> - memory-region
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/firmware/imx/rsrc.h>
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
> index 0f6d8db18d6c..a15787e504f0 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.yaml
> +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
> @@ -172,6 +172,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
> index 878a2079ebb6..1bd2870c3a9c 100644
> --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
> +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
> @@ -34,9 +34,12 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> npe@c8006000 {
> compatible = "intel,ixp4xx-network-processing-engine";
> reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
> };
> +...
> diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> index 64e279a4bc10..5f1ed20e43ee 100644
> --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> @@ -47,6 +47,8 @@ required:
> - "#gpio-cells"
> - gpio-controller
>
> +additionalProperties: false
> +
> dependencies:
> interrupt-controller: [ interrupts ]
>
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> index c58ff9a94f45..1a54db04f29d 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -64,6 +64,8 @@ required:
> - gpio-ranges
> - socionext,interrupt-ranges
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> index d102888c1be7..a36aec27069c 100644
> --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> @@ -49,6 +49,8 @@ required:
> - "#gpio-cells"
> - gpio-controller
>
> +additionalProperties: false
> +
> examples:
> - |
> logicvc: logicvc@43c00000 {
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> index 05fd9a404ff7..0b229a7d4a98 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> @@ -53,6 +53,8 @@ required:
> - interrupt-names
> - clocks
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> index 6819cde050df..0407e45eb8c4 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> @@ -94,6 +94,8 @@ required:
> - interrupt-names
> - clocks
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> index afde81be3c29..f5401cc8de4a 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> @@ -115,6 +115,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> index f4dfa6fc724c..665c6e3b31d3 100644
> --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> @@ -36,6 +36,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> rotator@12810000 {
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> index 2a9822075b36..154bee851139 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -47,6 +47,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> index 6a742a51e2f9..44a63fffb4be 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> @@ -87,6 +87,8 @@ required:
> - reg
>
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> index 5d42e1304202..e8feee38c76c 100644
> --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> @@ -32,6 +32,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 168235ad5d81..3f043e943668 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -76,6 +76,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> index c1c6d6f223cf..8723a336229e 100644
> --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> @@ -36,6 +36,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> index 9acde6d2e2d9..a67ba67dab51 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> @@ -67,6 +67,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> index 91ab9c842273..77605f17901c 100644
> --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> @@ -53,6 +53,8 @@ required:
> - dout-gpios
> - avdd-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> index 59009997dca0..118809a03279 100644
> --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> @@ -32,6 +32,8 @@ required:
> - vref-supply
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> index 0ce290473fb0..8ffeceb6abae 100644
> --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -52,6 +52,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index acf36eef728b..b1627441a0b2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -69,6 +69,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> patternProperties:
> "^filter@[0-9]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> index 19e53930ebf6..1fe561574019 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> @@ -38,6 +38,8 @@ required:
> - compatible
> - vcc-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> serial {
> diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> index 50a50a0d7070..a93d1972a5c2 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> @@ -24,6 +24,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> index a285eaba7125..e51a585bd5a3 100644
> --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> @@ -34,6 +34,8 @@ required:
> - reg
> - vref-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> index 69bd5c06319d..d7d14f2f1c20 100644
> --- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> @@ -28,6 +28,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> index 1cc60d7ecfa0..1a88b3c253d5 100644
> --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> @@ -28,6 +28,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> index cbb00be8f359..0ea278b07d1c 100644
> --- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> @@ -38,6 +38,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> index 17e7f140b69b..fe7bfe1adbda 100644
> --- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> @@ -29,6 +29,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> index aae8a6d627c9..f92bf7b2b7f0 100644
> --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> @@ -30,6 +30,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> index e86ef64ecf03..7b92ba8cbb9f 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> @@ -32,6 +32,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> index ed2c3d5eadf5..e8f7d1ada57b 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> @@ -62,6 +62,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> index 0ff9b11f9d18..fb19a2d7a849 100644
> --- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> @@ -45,6 +45,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 9f5ca9c42025..64c18f1693f0 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -33,6 +33,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index 5d4aec0e0d24..49257f9251e8 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -52,6 +52,8 @@ required:
> - vddd-supply
> - vdda-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> index 4e80ea7c1475..7ac5eb7560e0 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -56,6 +56,8 @@ required:
> - trig-gpios
> - echo-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> index a079c9921af6..ada55f186f3c 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> @@ -42,6 +42,8 @@ required:
> - compatible
> - ping-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index d4922f9f0376..acc030c1b20e 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -398,6 +398,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> index b98bf9363c8f..2384465eaa19 100644
> --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> @@ -26,6 +26,8 @@ required:
> - compatible
> - enable-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> index 2f2e0b6ebbbd..3a2ad6ec64db 100644
> --- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> +++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> @@ -33,3 +33,6 @@ properties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
> index 507c141ea760..ccc507f384d2 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
> @@ -44,6 +44,8 @@ required:
> - interrupt-controller
> - '#interrupt-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> intcon: interrupt-controller@c8003000 {
> diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> index 7cdd3aaa2ba4..0e33cd9e010e 100644
> --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> @@ -80,6 +80,8 @@ required:
> - clock-names
> - "#iommu-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos5250.h>
> diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> index 8c43f1e1bf7d..c6f96cabd4d1 100644
> --- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> @@ -49,3 +49,6 @@ required:
> - compatible
> - "#address-cells"
> - "#size-cells"
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> index b50f4bcc98f1..90edf9d33b33 100644
> --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> @@ -50,3 +50,6 @@ patternProperties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> index 319280563648..aa2b3bf56b57 100644
> --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> @@ -41,6 +41,8 @@ required:
> - interrupts
> - "#mbox-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> mailbox@c883c404 {
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 335717e15970..37d77e065491 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -124,6 +124,8 @@ required:
> - amlogic,ao-sysctrl
> - amlogic,canvas
>
> +additionalProperties: false
> +
> examples:
> - |
> vdec: video-decoder@c8820000 {
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> index e8ce37fcbfec..95ffa8bc0533 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> @@ -82,6 +82,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> cec_AO: cec@100 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> index 8e9251a0f9ef..fcb5f13704a5 100644
> --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> @@ -59,6 +59,8 @@ required:
> - interrupts
> - port
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
> index 480385789394..b0a0f0d3d9d4 100644
> --- a/Documentation/devicetree/bindings/mfd/max77650.yaml
> +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
> @@ -73,6 +73,8 @@ required:
> - gpio-controller
> - "#gpio-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> index 38dc4f8b0ceb..3a6a1a26e2b3 100644
> --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> @@ -77,6 +77,8 @@ required:
> - gpio-controller
> - "#gpio-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
> index 0ea21a6f70b4..38ab0499102d 100644
> --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
> +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
> @@ -38,6 +38,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index b9e9696da5be..976f139bb66e 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -167,6 +167,8 @@ required:
> - '#address-cells'
> - '#size-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> index e5922b427342..c03b83103e87 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> @@ -34,6 +34,8 @@ required:
> - resets
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/sun50i-h6-ccu.h>
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
> index 346f9c35427c..453c083cf44c 100644
> --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
> @@ -44,6 +44,8 @@ required:
> - reset-names
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> phy@46000 {
> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> index 0ccee64c6962..9a346d6290d9 100644
> --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> @@ -40,6 +40,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> sysconf: chiptop@e0200000 {
> diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> index 5ab436189f3b..00609ace677c 100644
> --- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> @@ -31,6 +31,8 @@ required:
> - reset-gpios
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> index 452cee1aed32..fd1982c56104 100644
> --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> @@ -159,6 +159,8 @@ required:
> - "#reset-cells"
> - ranges
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/soc/ti,sci_pm_domain.h>
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> index 135c7dfbc180..7651a675ab2d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> @@ -57,6 +57,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> syscon: scu@1e6e2000 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> index 824f7fd1d51b..36feaf5e2dff 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> @@ -70,6 +70,8 @@ required:
> - compatible
> - aspeed,external-nodes
>
> +additionalProperties: false
> +
> examples:
> - |
> apb {
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> index ac8d1c30a8ed..45af29bc3202 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> @@ -92,6 +92,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> syscon: scu@1e6e2000 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> index ef4de32cb17c..46a0478cb924 100644
> --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> @@ -194,6 +194,8 @@ required:
> - ranges
> - pins-are-numbered
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/pinctrl/stm32-pinfunc.h>
> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> index d3098c924b25..6c6079fe1351 100644
> --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> @@ -68,6 +68,8 @@ required:
> - "#power-domain-cells"
> - amlogic,ao-sysctrl
>
> +additionalProperties: false
> +
> examples:
> - |
> pwrc: power-controller {
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> index 520e07e6f21b..3412fe7e1e80 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> @@ -41,6 +41,8 @@ required:
> - regmap
> - offset
>
> +additionalProperties: false
> +
> allOf:
> - if:
> not:
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> index d38006b1f1f4..b80772cb9f06 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> @@ -41,6 +41,8 @@ required:
> - regmap
> - offset
>
> +additionalProperties: false
> +
> allOf:
> - if:
> not:
> diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> index deef010ec535..62eeddb65aed 100644
> --- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> @@ -32,3 +32,6 @@ properties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> index 9e21b83d717e..239b49fad805 100644
> --- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> +++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> @@ -55,6 +55,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c@1 {
> diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> index 50690487edc8..ce0a4021ae7f 100644
> --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> @@ -29,3 +29,6 @@ patternProperties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> index b3f57d81f007..92922d3afd14 100644
> --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> @@ -29,6 +29,8 @@ required:
> - reg
> - "#reset-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> reset-controller@c884404 {
> diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
> index 411bd76f1b64..512a33bdb208 100644
> --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
> +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
> @@ -28,6 +28,8 @@ required:
> - reg
> - "#reset-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> reset-controller@8b2c800 {
> diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> index a9ff3cb35c5e..444be32a8a29 100644
> --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> @@ -29,6 +29,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> rng@c8834000 {
> diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> index 42d9a38e4e1a..89ab67f20a7f 100644
> --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> rng {
> diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> index dcff573cbdb1..b95cb017f469 100644
> --- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> @@ -51,6 +51,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/r7s72100-clock.h>
> diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> index 0a54296d7218..48c6cafca90c 100644
> --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> @@ -111,6 +111,8 @@ required:
> - clocks
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/mfd/stm32f4-rcc.h>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> index 214fe8beddc3..d4178ab0d675 100644
> --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> @@ -62,6 +62,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> serial@84c0 {
> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> index f548594d020b..cb008fd188d8 100644
> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> @@ -40,6 +40,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> canvas: video-lut@48 {
> diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> index 75e0cbe6be70..76ee695097bf 100644
> --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> @@ -59,6 +59,8 @@ required:
> - iovdd-supply
> - dvdd-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> index 38eaf0c028f9..a495d5fc0d23 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> @@ -139,6 +139,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> codec@1,0{
> diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> index 140a37fc3c0b..d1b65554e681 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> @@ -63,6 +63,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> sh_fsi2: sound@ec230000 {
> diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> index c6b244352d05..8ff2d39e7d17 100644
> --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> @@ -69,6 +69,8 @@ required:
> - cpu
> - codec
>
> +additionalProperties: false
> +
> examples:
> - |
> sound {
> diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> index 53e3bad4178c..b2ad093d94df 100644
> --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> @@ -115,6 +115,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos-audss-clk.h>
> diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> index 469cec133647..930188bc5e6a 100644
> --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> @@ -56,6 +56,8 @@ required:
> - '#size-cells'
> - ranges
>
> +additionalProperties: false
> +
> patternProperties:
> "-sram@[0-9a-f]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> index 93fe7b10a82e..e43ec50bda37 100644
> --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -42,6 +42,8 @@ required:
> - clocks
> - amlogic,ao-secure
>
> +additionalProperties: false
> +
> examples:
> - |
> cpu_temp: temperature-sensor@ff634800 {
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> index 6deead07728e..fa255672e8e5 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> @@ -82,6 +82,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> oneOf:
> - required:
> - interrupts
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> index f7ef6646bade..582bbef62b95 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> @@ -95,6 +95,8 @@ required:
> - '#address-cells'
> - '#size-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> timer@f0000000 {
> diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> index 21c24a8e28fd..4956c8f409d2 100644
> --- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> @@ -35,6 +35,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> timer@2c000600 {
> diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> index 2807225db902..1a721d8af67a 100644
> --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> @@ -32,6 +32,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> index 273e359854dd..37bd01a62c52 100644
> --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> @@ -52,6 +52,8 @@ required:
> - interrupts
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> // In this example, the IP contains two local timers, using separate
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 51d1f6e43c02..bcae5f9b1d7f 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -369,4 +369,6 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> ...
Le mer. 25 mars 2020 à 23:06, Rob Herring <[email protected]> a écrit :
>
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
>
> So let's stick with the json-schema defined default and add
> 'additionalProperties: false' where needed. This will be a continual
> review comment and game of wack-a-mole.
for stm32 bindings:
Reviewed-by Benjamin Gaignard <[email protected]>
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++
> .../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
> Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++
> Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++
> .../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++
> Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
> .../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++
> .../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
> Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
> .../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
> .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
> Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
> Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
> .../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++
> .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
> Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
> .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++
> Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++
> .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
> Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++
> .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
> Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++
> Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++
> .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++
> Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++
> Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++
> Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++
> .../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
> Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
> .../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
> Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++
> .../bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 2 ++
> Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml | 2 ++
> .../devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml | 2 ++
> .../bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml | 2 ++
> .../devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml | 2 ++
> Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 2 ++
> .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml | 2 ++
> .../devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-poweroff.yaml | 2 ++
> .../devicetree/bindings/power/reset/syscon-reboot.yaml | 2 ++
> .../devicetree/bindings/power/supply/max77650-charger.yaml | 3 +++
> Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml | 2 ++
> .../devicetree/bindings/regulator/max77650-regulator.yaml | 3 +++
> .../devicetree/bindings/reset/amlogic,meson-reset.yaml | 2 ++
> .../bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml | 2 ++
> Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml | 2 ++
> Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml | 2 ++
> Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 2 ++
> .../devicetree/bindings/serial/amlogic,meson-uart.yaml | 2 ++
> .../devicetree/bindings/soc/amlogic/amlogic,canvas.yaml | 2 ++
> Documentation/devicetree/bindings/sound/adi,adau7118.yaml | 2 ++
> Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml | 2 ++
> Documentation/devicetree/bindings/sound/renesas,fsi.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung,odroid.yaml | 2 ++
> Documentation/devicetree/bindings/sound/samsung-i2s.yaml | 2 ++
> Documentation/devicetree/bindings/sram/qcom,ocmem.yaml | 2 ++
> Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,arch_timer.yaml | 2 ++
> .../devicetree/bindings/timer/arm,arch_timer_mmio.yaml | 2 ++
> Documentation/devicetree/bindings/timer/arm,global_timer.yaml | 2 ++
> .../devicetree/bindings/timer/intel,ixp4xx-timer.yaml | 2 ++
> .../devicetree/bindings/timer/samsung,exynos4210-mct.yaml | 2 ++
> Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
> 117 files changed, 240 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> index e4131fa42b26..572381306681 100644
> --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
> @@ -21,6 +21,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> clkmgr@ffd04000 {
> diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> index 853d7d2b56f5..66213bd95e6e 100644
> --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> @@ -43,6 +43,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> ao-secure@140 {
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> index 79902f470e4b..c3a8604dfa80 100644
> --- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
> @@ -43,6 +43,8 @@ required:
> - reg-names
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> index 7f8d17f33983..dd087643a9f8 100644
> --- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> +++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
> @@ -27,6 +27,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> prr: chipid@ff000044 {
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> index afcd70803c12..0425d333b50d 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> @@ -30,6 +30,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> chipid@10000000 {
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> index 73b56fc5bf58..c9651892710e 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -89,6 +89,8 @@ required:
> - clock-names
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos5250.h>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
> index 51d23b6f8a94..3d9abad3c749 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
> @@ -23,6 +23,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> firmware@203f000 {
> diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> index 0dedf94c8578..baff80197d5a 100644
> --- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> +++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
> @@ -29,6 +29,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/stm32mp1-clks.h>
> diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> index d1c040228cf7..a203d5d498db 100644
> --- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> +++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
> @@ -44,6 +44,8 @@ required:
> - clocks
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Display PIXEL Clock node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> index cd0b8a341321..03386b0861a2 100644
> --- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
> @@ -52,6 +52,8 @@ required:
> - clock-names
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock Control Module node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> index 89aee63c9019..4351a1dbb4f7 100644
> --- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
> @@ -52,6 +52,8 @@ required:
> - clock-names
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock Control Module node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> index f0b804a7f096..0e8b07710451 100644
> --- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
> @@ -35,6 +35,8 @@ required:
> - clocks
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Clock controller node:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> index 3647007f82ca..eacccc88bbf6 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
> @@ -68,6 +68,8 @@ required:
> - nvmem-cell-names
> - '#thermal-sensor-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@900000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> index 89c6e070e7ac..98572b4a9b60 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
> @@ -40,6 +40,8 @@ required:
> - '#clock-cells'
> - '#reset-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@1800000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> index 18e4e77b8cfa..5a5b2214f0ca 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
> @@ -56,6 +56,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@300000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> index 1d3cae980471..a0bb713929b0 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
> @@ -66,6 +66,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmcc.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> index 8cdece395eba..ce06f3f8c3e3 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
> @@ -40,6 +40,8 @@ required:
> - '#clock-cells'
> - '#reset-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> clock-controller@1800000 {
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> index ee4f968e2909..a345320e0e49 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
> @@ -58,6 +58,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> index 888e9a708390..36f3b3668ced 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
> @@ -56,6 +56,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index d18f8ab9eeee..e533bb0cfd2b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -74,6 +74,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> # Example for GCC for MSM8960:
> - |
> diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> index 85518494ce43..f684fe67db84 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
> @@ -74,6 +74,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> index 7d853c1a85e5..d747bb58f0a7 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
> @@ -50,6 +50,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-msm8998.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> index 2cd158f13bab..c9fd748b4d7c 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - '#clock-cells'
>
> +additionalProperties: false
> +
> examples:
> # Example for GCC for SDM845: The below node should be defined inside
> # &apps_rsc node.
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> index 0429062f1585..58cdfd5924d3 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
> @@ -58,6 +58,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> index 5785192cc4be..8635e35fd3f0 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
> @@ -52,6 +52,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> index 31df901884ac..0071b9701960 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
> @@ -48,6 +48,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> index 89269ddfbdcd..ad47d747a3e4 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
> @@ -67,6 +67,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> index bac04f1c5d79..7a052ac5dc00 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
> @@ -52,6 +52,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> index 9d216c0f11d4..2a6a81ab0318 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
> @@ -48,6 +48,8 @@ required:
> - '#reset-cells'
> - '#power-domain-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/qcom,rpmh.h>
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> index d1205a6697a0..d8e573eeb5ec 100644
> --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
> @@ -107,6 +107,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> vpu: vpu@d0100000 {
> diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> index 2ca3ddbe1ff4..e7f2ad7dab5e 100644
> --- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> +++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
> @@ -43,6 +43,8 @@ required:
> - interrupts
> - '#dma-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> dma@3000000 {
> diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> index f04870d84542..a5dc070d0ca7 100644
> --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> @@ -68,6 +68,8 @@ required:
> - mbox-names
> - memory-region
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/firmware/imx/rsrc.h>
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
> index 0f6d8db18d6c..a15787e504f0 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.yaml
> +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
> @@ -172,6 +172,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
> index 878a2079ebb6..1bd2870c3a9c 100644
> --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
> +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
> @@ -34,9 +34,12 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> npe@c8006000 {
> compatible = "intel,ixp4xx-network-processing-engine";
> reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
> };
> +...
> diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> index 64e279a4bc10..5f1ed20e43ee 100644
> --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> @@ -47,6 +47,8 @@ required:
> - "#gpio-cells"
> - gpio-controller
>
> +additionalProperties: false
> +
> dependencies:
> interrupt-controller: [ interrupts ]
>
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> index c58ff9a94f45..1a54db04f29d 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -64,6 +64,8 @@ required:
> - gpio-ranges
> - socionext,interrupt-ranges
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> index d102888c1be7..a36aec27069c 100644
> --- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
> @@ -49,6 +49,8 @@ required:
> - "#gpio-cells"
> - gpio-controller
>
> +additionalProperties: false
> +
> examples:
> - |
> logicvc: logicvc@43c00000 {
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> index 05fd9a404ff7..0b229a7d4a98 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
> @@ -53,6 +53,8 @@ required:
> - interrupt-names
> - clocks
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> index 6819cde050df..0407e45eb8c4 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
> @@ -94,6 +94,8 @@ required:
> - interrupt-names
> - clocks
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> index afde81be3c29..f5401cc8de4a 100644
> --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
> @@ -115,6 +115,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> allOf:
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> index f4dfa6fc724c..665c6e3b31d3 100644
> --- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
> @@ -36,6 +36,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> rotator@12810000 {
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> index 2a9822075b36..154bee851139 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
> @@ -47,6 +47,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> index 6a742a51e2f9..44a63fffb4be 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> @@ -87,6 +87,8 @@ required:
> - reg
>
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> index 5d42e1304202..e8feee38c76c 100644
> --- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
> @@ -32,6 +32,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 168235ad5d81..3f043e943668 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -76,6 +76,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> index c1c6d6f223cf..8723a336229e 100644
> --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
> @@ -36,6 +36,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> index 9acde6d2e2d9..a67ba67dab51 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> @@ -67,6 +67,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> index 91ab9c842273..77605f17901c 100644
> --- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
> @@ -53,6 +53,8 @@ required:
> - dout-gpios
> - avdd-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> index 59009997dca0..118809a03279 100644
> --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> @@ -32,6 +32,8 @@ required:
> - vref-supply
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> index 0ce290473fb0..8ffeceb6abae 100644
> --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -52,6 +52,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index acf36eef728b..b1627441a0b2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -69,6 +69,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> patternProperties:
> "^filter@[0-9]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> index 19e53930ebf6..1fe561574019 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
> @@ -38,6 +38,8 @@ required:
> - compatible
> - vcc-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> serial {
> diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> index 50a50a0d7070..a93d1972a5c2 100644
> --- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> +++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
> @@ -24,6 +24,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> index a285eaba7125..e51a585bd5a3 100644
> --- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
> @@ -34,6 +34,8 @@ required:
> - reg
> - vref-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> spi {
> diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> index 69bd5c06319d..d7d14f2f1c20 100644
> --- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
> @@ -28,6 +28,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> index 1cc60d7ecfa0..1a88b3c253d5 100644
> --- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
> @@ -28,6 +28,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> index cbb00be8f359..0ea278b07d1c 100644
> --- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
> @@ -38,6 +38,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> index 17e7f140b69b..fe7bfe1adbda 100644
> --- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
> @@ -29,6 +29,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> index aae8a6d627c9..f92bf7b2b7f0 100644
> --- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
> @@ -30,6 +30,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> index e86ef64ecf03..7b92ba8cbb9f 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
> @@ -32,6 +32,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> index ed2c3d5eadf5..e8f7d1ada57b 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> @@ -62,6 +62,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> index 0ff9b11f9d18..fb19a2d7a849 100644
> --- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
> @@ -45,6 +45,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 9f5ca9c42025..64c18f1693f0 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -33,6 +33,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index 5d4aec0e0d24..49257f9251e8 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -52,6 +52,8 @@ required:
> - vddd-supply
> - vdda-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> index 4e80ea7c1475..7ac5eb7560e0 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -56,6 +56,8 @@ required:
> - trig-gpios
> - echo-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> index a079c9921af6..ada55f186f3c 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
> @@ -42,6 +42,8 @@ required:
> - compatible
> - ping-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index d4922f9f0376..acc030c1b20e 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -398,6 +398,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> index b98bf9363c8f..2384465eaa19 100644
> --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
> @@ -26,6 +26,8 @@ required:
> - compatible
> - enable-gpios
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> index 2f2e0b6ebbbd..3a2ad6ec64db 100644
> --- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> +++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
> @@ -33,3 +33,6 @@ properties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
> index 507c141ea760..ccc507f384d2 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
> @@ -44,6 +44,8 @@ required:
> - interrupt-controller
> - '#interrupt-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> intcon: interrupt-controller@c8003000 {
> diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> index 7cdd3aaa2ba4..0e33cd9e010e 100644
> --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
> @@ -80,6 +80,8 @@ required:
> - clock-names
> - "#iommu-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos5250.h>
> diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> index 8c43f1e1bf7d..c6f96cabd4d1 100644
> --- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
> @@ -49,3 +49,6 @@ required:
> - compatible
> - "#address-cells"
> - "#size-cells"
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> index b50f4bcc98f1..90edf9d33b33 100644
> --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> @@ -50,3 +50,6 @@ patternProperties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> index 319280563648..aa2b3bf56b57 100644
> --- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
> @@ -41,6 +41,8 @@ required:
> - interrupts
> - "#mbox-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> mailbox@c883c404 {
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 335717e15970..37d77e065491 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -124,6 +124,8 @@ required:
> - amlogic,ao-sysctrl
> - amlogic,canvas
>
> +additionalProperties: false
> +
> examples:
> - |
> vdec: video-decoder@c8820000 {
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> index e8ce37fcbfec..95ffa8bc0533 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> @@ -82,6 +82,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> cec_AO: cec@100 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> index 8e9251a0f9ef..fcb5f13704a5 100644
> --- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
> @@ -59,6 +59,8 @@ required:
> - interrupts
> - port
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
> index 480385789394..b0a0f0d3d9d4 100644
> --- a/Documentation/devicetree/bindings/mfd/max77650.yaml
> +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
> @@ -73,6 +73,8 @@ required:
> - gpio-controller
> - "#gpio-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> index 38dc4f8b0ceb..3a6a1a26e2b3 100644
> --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
> @@ -77,6 +77,8 @@ required:
> - gpio-controller
> - "#gpio-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
> index 0ea21a6f70b4..38ab0499102d 100644
> --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
> +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
> @@ -38,6 +38,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index b9e9696da5be..976f139bb66e 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -167,6 +167,8 @@ required:
> - '#address-cells'
> - '#size-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> index e5922b427342..c03b83103e87 100644
> --- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
> @@ -34,6 +34,8 @@ required:
> - resets
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/sun50i-h6-ccu.h>
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
> index 346f9c35427c..453c083cf44c 100644
> --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
> @@ -44,6 +44,8 @@ required:
> - reset-names
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> phy@46000 {
> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> index 0ccee64c6962..9a346d6290d9 100644
> --- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
> @@ -40,6 +40,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> sysconf: chiptop@e0200000 {
> diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> index 5ab436189f3b..00609ace677c 100644
> --- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
> @@ -31,6 +31,8 @@ required:
> - reset-gpios
> - "#phy-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> index 452cee1aed32..fd1982c56104 100644
> --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
> @@ -159,6 +159,8 @@ required:
> - "#reset-cells"
> - ranges
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/soc/ti,sci_pm_domain.h>
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> index 135c7dfbc180..7651a675ab2d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> @@ -57,6 +57,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> syscon: scu@1e6e2000 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> index 824f7fd1d51b..36feaf5e2dff 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> @@ -70,6 +70,8 @@ required:
> - compatible
> - aspeed,external-nodes
>
> +additionalProperties: false
> +
> examples:
> - |
> apb {
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> index ac8d1c30a8ed..45af29bc3202 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> @@ -92,6 +92,8 @@ patternProperties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> examples:
> - |
> syscon: scu@1e6e2000 {
> diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> index ef4de32cb17c..46a0478cb924 100644
> --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> @@ -194,6 +194,8 @@ required:
> - ranges
> - pins-are-numbered
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/pinctrl/stm32-pinfunc.h>
> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> index d3098c924b25..6c6079fe1351 100644
> --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> @@ -68,6 +68,8 @@ required:
> - "#power-domain-cells"
> - amlogic,ao-sysctrl
>
> +additionalProperties: false
> +
> examples:
> - |
> pwrc: power-controller {
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> index 520e07e6f21b..3412fe7e1e80 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
> @@ -41,6 +41,8 @@ required:
> - regmap
> - offset
>
> +additionalProperties: false
> +
> allOf:
> - if:
> not:
> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> index d38006b1f1f4..b80772cb9f06 100644
> --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
> @@ -41,6 +41,8 @@ required:
> - regmap
> - offset
>
> +additionalProperties: false
> +
> allOf:
> - if:
> not:
> diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> index deef010ec535..62eeddb65aed 100644
> --- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
> @@ -32,3 +32,6 @@ properties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> index 9e21b83d717e..239b49fad805 100644
> --- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> +++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
> @@ -55,6 +55,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c@1 {
> diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> index 50690487edc8..ce0a4021ae7f 100644
> --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
> @@ -29,3 +29,6 @@ patternProperties:
>
> required:
> - compatible
> +additionalProperties: false
> +
> +...
> diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> index b3f57d81f007..92922d3afd14 100644
> --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
> @@ -29,6 +29,8 @@ required:
> - reg
> - "#reset-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> reset-controller@c884404 {
> diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
> index 411bd76f1b64..512a33bdb208 100644
> --- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
> +++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
> @@ -28,6 +28,8 @@ required:
> - reg
> - "#reset-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> reset-controller@8b2c800 {
> diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> index a9ff3cb35c5e..444be32a8a29 100644
> --- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> +++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
> @@ -29,6 +29,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> rng@c8834000 {
> diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> index 42d9a38e4e1a..89ab67f20a7f 100644
> --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
> @@ -35,6 +35,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> rng {
> diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> index dcff573cbdb1..b95cb017f469 100644
> --- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
> @@ -51,6 +51,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/r7s72100-clock.h>
> diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> index 0a54296d7218..48c6cafca90c 100644
> --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> @@ -111,6 +111,8 @@ required:
> - clocks
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/mfd/stm32f4-rcc.h>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> index 214fe8beddc3..d4178ab0d675 100644
> --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
> @@ -62,6 +62,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> serial@84c0 {
> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> index f548594d020b..cb008fd188d8 100644
> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
> @@ -40,6 +40,8 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> canvas: video-lut@48 {
> diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> index 75e0cbe6be70..76ee695097bf 100644
> --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> @@ -59,6 +59,8 @@ required:
> - iovdd-supply
> - dvdd-supply
>
> +additionalProperties: false
> +
> examples:
> - |
> i2c {
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> index 38eaf0c028f9..a495d5fc0d23 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> @@ -139,6 +139,8 @@ required:
> - "#address-cells"
> - "#size-cells"
>
> +additionalProperties: false
> +
> examples:
> - |
> codec@1,0{
> diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> index 140a37fc3c0b..d1b65554e681 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> @@ -63,6 +63,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> sh_fsi2: sound@ec230000 {
> diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> index c6b244352d05..8ff2d39e7d17 100644
> --- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
> @@ -69,6 +69,8 @@ required:
> - cpu
> - codec
>
> +additionalProperties: false
> +
> examples:
> - |
> sound {
> diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> index 53e3bad4178c..b2ad093d94df 100644
> --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
> @@ -115,6 +115,8 @@ required:
> - clocks
> - clock-names
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/clock/exynos-audss-clk.h>
> diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> index 469cec133647..930188bc5e6a 100644
> --- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> +++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
> @@ -56,6 +56,8 @@ required:
> - '#size-cells'
> - ranges
>
> +additionalProperties: false
> +
> patternProperties:
> "-sram@[0-9a-f]+$":
> type: object
> diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> index 93fe7b10a82e..e43ec50bda37 100644
> --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
> @@ -42,6 +42,8 @@ required:
> - clocks
> - amlogic,ao-secure
>
> +additionalProperties: false
> +
> examples:
> - |
> cpu_temp: temperature-sensor@ff634800 {
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> index 6deead07728e..fa255672e8e5 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
> @@ -82,6 +82,8 @@ properties:
> required:
> - compatible
>
> +additionalProperties: false
> +
> oneOf:
> - required:
> - interrupts
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> index f7ef6646bade..582bbef62b95 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> @@ -95,6 +95,8 @@ required:
> - '#address-cells'
> - '#size-cells'
>
> +additionalProperties: false
> +
> examples:
> - |
> timer@f0000000 {
> diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> index 21c24a8e28fd..4956c8f409d2 100644
> --- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
> @@ -35,6 +35,8 @@ required:
> - reg
> - clocks
>
> +additionalProperties: false
> +
> examples:
> - |
> timer@2c000600 {
> diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> index 2807225db902..1a721d8af67a 100644
> --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
> @@ -32,6 +32,8 @@ required:
> - reg
> - interrupts
>
> +additionalProperties: false
> +
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> index 273e359854dd..37bd01a62c52 100644
> --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
> @@ -52,6 +52,8 @@ required:
> - interrupts
> - reg
>
> +additionalProperties: false
> +
> examples:
> - |
> // In this example, the IP contains two local timers, using separate
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 51d1f6e43c02..bcae5f9b1d7f 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -369,4 +369,6 @@ required:
> - compatible
> - reg
>
> +additionalProperties: false
> +
> ...
> --
> 2.20.1
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Wed, 25 Mar 2020, Rob Herring wrote:
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
>
> So let's stick with the json-schema defined default and add
> 'additionalProperties: false' where needed. This will be a continual
> review comment and game of wack-a-mole.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/altera/socfpga-clk-manager.yaml | 2 ++
> .../bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml | 2 ++
> Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml | 2 ++
> Documentation/devicetree/bindings/arm/renesas,prr.yaml | 2 ++
> .../devicetree/bindings/arm/samsung/exynos-chipid.yaml | 2 ++
> Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 ++
> .../bindings/arm/samsung/samsung-secure-firmware.yaml | 2 ++
> .../devicetree/bindings/arm/stm32/st,stm32-syscon.yaml | 2 ++
> Documentation/devicetree/bindings/clock/fsl,plldig.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mn-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/imx8mp-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/milbeaut-clock.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,gcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,mmcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,msm8998-gpucc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sc7180-videocc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-dispcc.yaml | 2 ++
> Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml | 2 ++
> .../devicetree/bindings/clock/qcom,sdm845-videocc.yaml | 2 ++
> .../devicetree/bindings/display/amlogic,meson-vpu.yaml | 2 ++
> .../devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml | 2 ++
> Documentation/devicetree/bindings/dsp/fsl,dsp.yaml | 2 ++
> Documentation/devicetree/bindings/eeprom/at24.yaml | 2 ++
> .../firmware/intel,ixp4xx-network-processing-engine.yaml | 3 +++
> .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml | 2 ++
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml | 2 ++
> Documentation/devicetree/bindings/gpu/samsung-rotator.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml | 2 ++
> Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml | 2 ++
> Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml | 2 ++
> Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 2 ++
> .../devicetree/bindings/iio/adc/microchip,mcp3911.yaml | 2 ++
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/plantower,pms7003.yaml | 2 ++
> .../devicetree/bindings/iio/chemical/sensirion,sps30.yaml | 2 ++
> Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/adux1020.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/bh1750.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/isl29018.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/noa1305.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2583.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/tsl2772.yaml | 2 ++
> Documentation/devicetree/bindings/iio/light/veml6030.yaml | 2 ++
> .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 ++
> Documentation/devicetree/bindings/iio/pressure/bmp085.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/devantech-srf04.yaml | 2 ++
> .../devicetree/bindings/iio/proximity/parallax-ping.yaml | 2 ++
> .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 2 ++
> Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 2 ++
> Documentation/devicetree/bindings/input/max77650-onkey.yaml | 3 +++
> .../bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml | 2 ++
> Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml | 2 ++
> Documentation/devicetree/bindings/leds/leds-max77650.yaml | 3 +++
> Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml | 3 +++
> .../devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml | 2 ++
> Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml | 2 ++
> .../devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml | 2 ++
> Documentation/devicetree/bindings/media/renesas,ceu.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/max77650.yaml | 2 ++
> Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 2 ++
Acked-by: Lee Jones <[email protected]>
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Wed, 25 Mar 2020, Rob Herring wrote:
> Numerous schemas are missing 'additionalProperties: false' statements which
> ensures a binding doesn't have any extra undocumented properties or child
> nodes. Fixing this reveals various missing properties, so let's fix all
> those occurrences.
>
> Cc: Stephen Boyd <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Guillaume La Roque <[email protected]>
> Cc: Zhang Rui <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/clock/fsl,plldig.yaml | 3 +++
> .../gpio/socionext,uniphier-gpio.yaml | 2 ++
> .../bindings/gpu/arm,mali-bifrost.yaml | 6 ++---
> .../bindings/gpu/arm,mali-midgard.yaml | 3 +++
> .../bindings/iio/adc/adi,ad7192.yaml | 1 -
> .../bindings/iio/pressure/bmp085.yaml | 3 +++
> .../media/amlogic,meson-gx-ao-cec.yaml | 9 +++++---
> .../bindings/mfd/rohm,bd71828-pmic.yaml | 3 +++
Acked-by: Lee Jones <[email protected]>
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Wed, Mar 25, 2020 at 11:05 PM Rob Herring <[email protected]> wrote:
> Numerous schemas are missing 'additionalProperties: false' statements which
> ensures a binding doesn't have any extra undocumented properties or child
> nodes. Fixing this reveals various missing properties, so let's fix all
> those occurrences.
>
> Cc: Stephen Boyd <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Guillaume La Roque <[email protected]>
> Cc: Zhang Rui <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected].
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
Sorry for errors caused by me,
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
Hi Rob.
On Wed, Mar 25, 2020 at 04:05:38PM -0600, Rob Herring wrote:
> The 'adi,adxl345' definition is a duplicate as there's a full binding in:
> Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
>
> The trivial-devices binding doesn't capture that 'adi,adxl346' has a
> fallback compatible 'adi,adxl345', so let's add it to adi,adxl345.yaml.
>
> Cc: Michael Hennerich <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 10 +++++++---
> Documentation/devicetree/bindings/trivial-devices.yaml | 4 ----
> 2 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index c602b6fe1c0c..d124eba1ce54 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -17,9 +17,13 @@ description: |
>
> properties:
> compatible:
> - enum:
> - - adi,adxl345
> - - adi,adxl375
> + oneOf:
> + - items:
> + - const: adi,adxl346
> + - const: adi,adxl345
> + - enum:
> + - adi,adxl345
> + - adi,adxl375
I assume it is my schema understanding that is poor.
But I cannot parse the above.
The mix of items, enum and const confuses me.
I guess that if I am confused then others may end in the same situation.
Can we improve readability here or amybe add a comment?
Sam
>
> reg:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 978de7d37c66..51d1f6e43c02 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -42,10 +42,6 @@ properties:
> - adi,adt7476
> # +/-1C TDM Extended Temp Range I.C
> - adi,adt7490
> - # Three-Axis Digital Accelerometer
> - - adi,adxl345
> - # Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
> - - adi,adxl346
> # AMS iAQ-Core VOC Sensor
> - ams,iaq-core
> # i2c serial eeprom (24cxx)
> --
> 2.20.1
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
On Thu, Mar 26, 2020 at 7:06 AM Rob Herring <[email protected]> wrote:
>
> Setting 'additionalProperties: false' is frequently omitted, but is
> important in order to check that there aren't extra undocumented
> properties in a binding.
>
> Ideally, we'd just add this automatically and make this the default, but
> there's some cases where it doesn't work. For example, if a common
> schema is referenced, then properties in the common schema aren't part
> of what's considered for 'additionalProperties'. Also, sometimes there
> are bus specific properties such as 'spi-max-frequency' that go into
> bus child nodes, but aren't defined in the child node's schema.
>
> So let's stick with the json-schema defined default and add
> 'additionalProperties: false' where needed. This will be a continual
> review comment and game of wack-a-mole.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
You may have already queue this up, but just in case.
Acked-by: Masahiro Yamada <[email protected]>
--
Best Regards
Masahiro Yamada
On Thu, Mar 26, 2020 at 7:06 AM Rob Herring <[email protected]> wrote:
>
> Numerous schemas are missing 'additionalProperties: false' statements which
> ensures a binding doesn't have any extra undocumented properties or child
> nodes. Fixing this reveals various missing properties, so let's fix all
> those occurrences.
>
> Cc: Stephen Boyd <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Hartmut Knaack <[email protected]>
> Cc: Lars-Peter Clausen <[email protected]>
> Cc: Peter Meerwald-Stadler <[email protected]>
> Cc: Neil Armstrong <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Kevin Hilman <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: "David S. Miller" <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Guillaume La Roque <[email protected]>
> Cc: Zhang Rui <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../gpio/socionext,uniphier-gpio.yaml | 2 ++
You may have already queue this up, but just in case.
Acked-by: Masahiro Yamada <[email protected]>
--
Best Regards
Masahiro Yamada
Hi Rob,
On Mon, Mar 30, 2020 at 4:09 PM Masahiro Yamada <[email protected]> wrote:
>
> On Thu, Mar 26, 2020 at 7:06 AM Rob Herring <[email protected]> wrote:
> >
> > Setting 'additionalProperties: false' is frequently omitted, but is
> > important in order to check that there aren't extra undocumented
> > properties in a binding.
> >
> > Ideally, we'd just add this automatically and make this the default, but
> > there's some cases where it doesn't work. For example, if a common
> > schema is referenced, then properties in the common schema aren't part
> > of what's considered for 'additionalProperties'. Also, sometimes there
> > are bus specific properties such as 'spi-max-frequency' that go into
> > bus child nodes, but aren't defined in the child node's schema.
> >
> > So let's stick with the json-schema defined default and add
> > 'additionalProperties: false' where needed. This will be a continual
> > review comment and game of wack-a-mole.
> >
> > Signed-off-by: Rob Herring <[email protected]>
> > ---
>
>
> > .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
>
>
> You may have already queue this up, but just in case.
>
> Acked-by: Masahiro Yamada <[email protected]>
I take back Ack for socionext,uniphier-gpio.yaml
Now "make dt_binding_check" produces a new warning.
gpio@55000000: 'interrupt-parent' does not match any of the regexes:
'pinctrl-[0-9]+'
This binding uses 'interrupt-parent'
without 'interrupts'.
Instead, the mapping of the interrupt numbers
is specified by the vendor-specific property
socionext,interrupt-ranges
I cannot add "interrupt-parent: true" because
dt-schema/meta-schemas/interrupts.yaml
has "interrupt-parent: false".
Is there any solution?
--
Best Regards
Masahiro Yamada
On Mon, Mar 30, 2020 at 2:38 AM Masahiro Yamada <[email protected]> wrote:
>
> Hi Rob,
>
> On Mon, Mar 30, 2020 at 4:09 PM Masahiro Yamada <[email protected]> wrote:
> >
> > On Thu, Mar 26, 2020 at 7:06 AM Rob Herring <[email protected]> wrote:
> > >
> > > Setting 'additionalProperties: false' is frequently omitted, but is
> > > important in order to check that there aren't extra undocumented
> > > properties in a binding.
> > >
> > > Ideally, we'd just add this automatically and make this the default, but
> > > there's some cases where it doesn't work. For example, if a common
> > > schema is referenced, then properties in the common schema aren't part
> > > of what's considered for 'additionalProperties'. Also, sometimes there
> > > are bus specific properties such as 'spi-max-frequency' that go into
> > > bus child nodes, but aren't defined in the child node's schema.
> > >
> > > So let's stick with the json-schema defined default and add
> > > 'additionalProperties: false' where needed. This will be a continual
> > > review comment and game of wack-a-mole.
> > >
> > > Signed-off-by: Rob Herring <[email protected]>
> > > ---
> >
> >
> > > .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 2 ++
> >
> >
> > You may have already queue this up, but just in case.
> >
> > Acked-by: Masahiro Yamada <[email protected]>
>
>
>
> I take back Ack for socionext,uniphier-gpio.yaml
>
>
>
> Now "make dt_binding_check" produces a new warning.
>
> gpio@55000000: 'interrupt-parent' does not match any of the regexes:
> 'pinctrl-[0-9]+'
>
>
> This binding uses 'interrupt-parent'
> without 'interrupts'.
>
> Instead, the mapping of the interrupt numbers
> is specified by the vendor-specific property
> socionext,interrupt-ranges
>
>
>
> I cannot add "interrupt-parent: true" because
> dt-schema/meta-schemas/interrupts.yaml
> has "interrupt-parent: false".
>
>
> Is there any solution?
I'd meant to just drop socionext,uniphier-gpio.yaml.
Rob
On Fri, Mar 27, 2020 at 2:22 PM Sam Ravnborg <[email protected]> wrote:
>
> Hi Rob.
>
> On Wed, Mar 25, 2020 at 04:05:38PM -0600, Rob Herring wrote:
> > The 'adi,adxl345' definition is a duplicate as there's a full binding in:
> > Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> >
> > The trivial-devices binding doesn't capture that 'adi,adxl346' has a
> > fallback compatible 'adi,adxl345', so let's add it to adi,adxl345.yaml.
> >
> > Cc: Michael Hennerich <[email protected]>
> > Cc: Jonathan Cameron <[email protected]>
> > Cc: Hartmut Knaack <[email protected]>
> > Cc: Lars-Peter Clausen <[email protected]>
> > Cc: Peter Meerwald-Stadler <[email protected]>
> > Cc: [email protected]
> > Signed-off-by: Rob Herring <[email protected]>
> > ---
> > .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 10 +++++++---
> > Documentation/devicetree/bindings/trivial-devices.yaml | 4 ----
> > 2 files changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > index c602b6fe1c0c..d124eba1ce54 100644
> > --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> > @@ -17,9 +17,13 @@ description: |
> >
> > properties:
> > compatible:
> > - enum:
> > - - adi,adxl345
> > - - adi,adxl375
> > + oneOf:
> > + - items:
> > + - const: adi,adxl346
> > + - const: adi,adxl345
> > + - enum:
> > + - adi,adxl345
> > + - adi,adxl375
>
> I assume it is my schema understanding that is poor.
> But I cannot parse the above.
>
> The mix of items, enum and const confuses me.
compatible can be one of 3 possibilities:
"adi,adxl346", "adi,adxl345"
"adi,adxl345"
"adi,adxl375"
For a single entry, 'items' can be omitted.
> I guess that if I am confused then others may end in the same situation.
> Can we improve readability here or amybe add a comment?
example-schema.yaml explains this to some extent. I'd rather improve that.
Rob