commit 1fd0d85affe4d6 ("soundwire: qcom: Add flag for software clock gating check")
added a flag for software clock gating check, however in commit
33ba01788889666 ("soundwire: qcom: Add support for controlling audio CGCR from HLOS")
the same check was added without the flag, so we would still end up failing
the software clock gating check.
Originally reported by Amit Pundir on DB845c, I also saw it on the
Lenovo Yoga C630, right before the splat, we would see
qcom-soundwire wcd934x-soundwire.6.auto: Failed to get audio_cgcr reset required for soundwire-v1.6.0
however, SDM845 has a soundwire-v1.3.0
Since the flag was added in 1fd0d85affe, lets just remove this one.
Fixes: 33ba01788889 ("soundwire: qcom: Add support for controlling audio CGCR from HLOS")
Signed-off-by: Steev Klimaszewski <[email protected]>
Reported-by: Amit Pundir <[email protected]>
---
drivers/soundwire/qcom.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 709a7c1e0704..b621f7fb866f 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -1355,10 +1355,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
ctrl->bus.compute_params = &qcom_swrm_compute_params;
ctrl->bus.clk_stop_timeout = 300;
- ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
- if (IS_ERR(ctrl->audio_cgcr))
- dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n");
-
ret = qcom_swrm_get_port_config(ctrl);
if (ret)
goto err_clk;
--
2.35.1
Hi Steev,
Thank you for looking into this crash. Srini submitted the same fix
earlier this week
https://www.spinics.net/lists/alsa-devel/msg146137.html
Regards,
Amit Pundir
On Thu, 18 Aug 2022 at 09:21, Steev Klimaszewski <[email protected]> wrote:
>
> commit 1fd0d85affe4d6 ("soundwire: qcom: Add flag for software clock gating check")
> added a flag for software clock gating check, however in commit
> 33ba01788889666 ("soundwire: qcom: Add support for controlling audio CGCR from HLOS")
> the same check was added without the flag, so we would still end up failing
> the software clock gating check.
>
> Originally reported by Amit Pundir on DB845c, I also saw it on the
> Lenovo Yoga C630, right before the splat, we would see
>
> qcom-soundwire wcd934x-soundwire.6.auto: Failed to get audio_cgcr reset required for soundwire-v1.6.0
>
> however, SDM845 has a soundwire-v1.3.0
>
> Since the flag was added in 1fd0d85affe, lets just remove this one.
>
> Fixes: 33ba01788889 ("soundwire: qcom: Add support for controlling audio CGCR from HLOS")
> Signed-off-by: Steev Klimaszewski <[email protected]>
> Reported-by: Amit Pundir <[email protected]>
> ---
> drivers/soundwire/qcom.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index 709a7c1e0704..b621f7fb866f 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -1355,10 +1355,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
> ctrl->bus.compute_params = &qcom_swrm_compute_params;
> ctrl->bus.clk_stop_timeout = 300;
>
> - ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
> - if (IS_ERR(ctrl->audio_cgcr))
> - dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n");
> -
> ret = qcom_swrm_get_port_config(ctrl);
> if (ret)
> goto err_clk;
> --
> 2.35.1
>
Oh perfect, I'm not sure how I missed that when I was searching. This
can be abandoned but it's nice to know I got the fix right :D
On Fri, Aug 19, 2022 at 3:51 AM Amit Pundir <[email protected]> wrote:
>
> Hi Steev,
>
> Thank you for looking into this crash. Srini submitted the same fix
> earlier this week
> https://www.spinics.net/lists/alsa-devel/msg146137.html
>
> Regards,
> Amit Pundir
>
> On Thu, 18 Aug 2022 at 09:21, Steev Klimaszewski <[email protected]> wrote:
> >
> > commit 1fd0d85affe4d6 ("soundwire: qcom: Add flag for software clock gating check")
> > added a flag for software clock gating check, however in commit
> > 33ba01788889666 ("soundwire: qcom: Add support for controlling audio CGCR from HLOS")
> > the same check was added without the flag, so we would still end up failing
> > the software clock gating check.
> >
> > Originally reported by Amit Pundir on DB845c, I also saw it on the
> > Lenovo Yoga C630, right before the splat, we would see
> >
> > qcom-soundwire wcd934x-soundwire.6.auto: Failed to get audio_cgcr reset required for soundwire-v1.6.0
> >
> > however, SDM845 has a soundwire-v1.3.0
> >
> > Since the flag was added in 1fd0d85affe, lets just remove this one.
> >
> > Fixes: 33ba01788889 ("soundwire: qcom: Add support for controlling audio CGCR from HLOS")
> > Signed-off-by: Steev Klimaszewski <[email protected]>
> > Reported-by: Amit Pundir <[email protected]>
> > ---
> > drivers/soundwire/qcom.c | 4 ----
> > 1 file changed, 4 deletions(-)
> >
> > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> > index 709a7c1e0704..b621f7fb866f 100644
> > --- a/drivers/soundwire/qcom.c
> > +++ b/drivers/soundwire/qcom.c
> > @@ -1355,10 +1355,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
> > ctrl->bus.compute_params = &qcom_swrm_compute_params;
> > ctrl->bus.clk_stop_timeout = 300;
> >
> > - ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
> > - if (IS_ERR(ctrl->audio_cgcr))
> > - dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n");
> > -
> > ret = qcom_swrm_get_port_config(ctrl);
> > if (ret)
> > goto err_clk;
> > --
> > 2.35.1
> >