Use preferred of_device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <[email protected]>
---
Perhaps device_get_match_data() could be used here and all the ACPI
specific code dropped, but not sure if all the ACPI code is really
necessary.
---
drivers/ata/ahci_xgene.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index ccef5e63bdf9..81a1d838c0fc 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -13,9 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/ahci_platform.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
+#include <linux/of.h>
#include <linux/phy/phy.h>
#include "ahci.h"
@@ -735,7 +733,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
struct ahci_host_priv *hpriv;
struct xgene_ahci_context *ctx;
struct resource *res;
- const struct of_device_id *of_devid;
enum xgene_ahci_version version = XGENE_AHCI_V1;
const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
&xgene_ahci_v2_port_info };
@@ -778,10 +775,8 @@ static int xgene_ahci_probe(struct platform_device *pdev)
ctx->csr_mux = csr;
}
- of_devid = of_match_device(xgene_ahci_of_match, dev);
- if (of_devid) {
- if (of_devid->data)
- version = (unsigned long) of_devid->data;
+ if (dev->of_node) {
+ version = (enum xgene_ahci_version)of_device_get_match_data(dev);
}
#ifdef CONFIG_ACPI
else {
--
2.40.1
On Fri, Oct 06, 2023 at 04:44:33PM -0500, Rob Herring wrote:
> Use preferred of_device_get_match_data() instead of of_match_device() to
> get the driver match data. With this, adjust the includes to explicitly
> include the correct headers.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Perhaps device_get_match_data() could be used here and all the ACPI
> specific code dropped, but not sure if all the ACPI code is really
> necessary.
> ---
> drivers/ata/ahci_xgene.c | 11 +++--------
> 1 file changed, 3 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
> index ccef5e63bdf9..81a1d838c0fc 100644
> --- a/drivers/ata/ahci_xgene.c
> +++ b/drivers/ata/ahci_xgene.c
> @@ -13,9 +13,7 @@
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/ahci_platform.h>
> -#include <linux/of_address.h>
> -#include <linux/of_device.h>
> -#include <linux/of_irq.h>
> +#include <linux/of.h>
> #include <linux/phy/phy.h>
> #include "ahci.h"
>
> @@ -735,7 +733,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
> struct ahci_host_priv *hpriv;
> struct xgene_ahci_context *ctx;
> struct resource *res;
> - const struct of_device_id *of_devid;
> enum xgene_ahci_version version = XGENE_AHCI_V1;
> const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
> &xgene_ahci_v2_port_info };
> @@ -778,10 +775,8 @@ static int xgene_ahci_probe(struct platform_device *pdev)
> ctx->csr_mux = csr;
> }
>
> - of_devid = of_match_device(xgene_ahci_of_match, dev);
> - if (of_devid) {
> - if (of_devid->data)
> - version = (unsigned long) of_devid->data;
> + if (dev->of_node) {
> + version = (enum xgene_ahci_version)of_device_get_match_data(dev);
> }
Nit: braces can be removed.
> #ifdef CONFIG_ACPI
> else {
> --
> 2.40.1
>
With or without nit fixed:
Reviewed-by: Niklas Cassel <[email protected]>
On Mon, Oct 9, 2023 at 9:41 AM Niklas Cassel <[email protected]> wrote:
>
> On Fri, Oct 06, 2023 at 04:44:33PM -0500, Rob Herring wrote:
> > Use preferred of_device_get_match_data() instead of of_match_device() to
> > get the driver match data. With this, adjust the includes to explicitly
> > include the correct headers.
> >
> > Signed-off-by: Rob Herring <[email protected]>
> > ---
> > Perhaps device_get_match_data() could be used here and all the ACPI
> > specific code dropped, but not sure if all the ACPI code is really
> > necessary.
> > ---
> > drivers/ata/ahci_xgene.c | 11 +++--------
> > 1 file changed, 3 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
> > index ccef5e63bdf9..81a1d838c0fc 100644
> > --- a/drivers/ata/ahci_xgene.c
> > +++ b/drivers/ata/ahci_xgene.c
> > @@ -13,9 +13,7 @@
> > #include <linux/module.h>
> > #include <linux/platform_device.h>
> > #include <linux/ahci_platform.h>
> > -#include <linux/of_address.h>
> > -#include <linux/of_device.h>
> > -#include <linux/of_irq.h>
> > +#include <linux/of.h>
> > #include <linux/phy/phy.h>
> > #include "ahci.h"
> >
> > @@ -735,7 +733,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
> > struct ahci_host_priv *hpriv;
> > struct xgene_ahci_context *ctx;
> > struct resource *res;
> > - const struct of_device_id *of_devid;
> > enum xgene_ahci_version version = XGENE_AHCI_V1;
> > const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
> > &xgene_ahci_v2_port_info };
> > @@ -778,10 +775,8 @@ static int xgene_ahci_probe(struct platform_device *pdev)
> > ctx->csr_mux = csr;
> > }
> >
> > - of_devid = of_match_device(xgene_ahci_of_match, dev);
> > - if (of_devid) {
> > - if (of_devid->data)
> > - version = (unsigned long) of_devid->data;
> > + if (dev->of_node) {
> > + version = (enum xgene_ahci_version)of_device_get_match_data(dev);
> > }
>
> Nit: braces can be removed.
>
> > #ifdef CONFIG_ACPI
> > else {
Coding style says otherwise when the 'else' has braces.
Rob
On Mon, Oct 09, 2023 at 10:19:54AM -0500, Rob Herring wrote:
> On Mon, Oct 9, 2023 at 9:41 AM Niklas Cassel <[email protected]> wrote:
> >
> > On Fri, Oct 06, 2023 at 04:44:33PM -0500, Rob Herring wrote:
> > > Use preferred of_device_get_match_data() instead of of_match_device() to
> > > get the driver match data. With this, adjust the includes to explicitly
> > > include the correct headers.
> > >
> > > Signed-off-by: Rob Herring <[email protected]>
> > > ---
> > > Perhaps device_get_match_data() could be used here and all the ACPI
> > > specific code dropped, but not sure if all the ACPI code is really
> > > necessary.
> > > ---
> > > drivers/ata/ahci_xgene.c | 11 +++--------
> > > 1 file changed, 3 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
> > > index ccef5e63bdf9..81a1d838c0fc 100644
> > > --- a/drivers/ata/ahci_xgene.c
> > > +++ b/drivers/ata/ahci_xgene.c
> > > @@ -13,9 +13,7 @@
> > > #include <linux/module.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/ahci_platform.h>
> > > -#include <linux/of_address.h>
> > > -#include <linux/of_device.h>
> > > -#include <linux/of_irq.h>
> > > +#include <linux/of.h>
> > > #include <linux/phy/phy.h>
> > > #include "ahci.h"
> > >
> > > @@ -735,7 +733,6 @@ static int xgene_ahci_probe(struct platform_device *pdev)
> > > struct ahci_host_priv *hpriv;
> > > struct xgene_ahci_context *ctx;
> > > struct resource *res;
> > > - const struct of_device_id *of_devid;
> > > enum xgene_ahci_version version = XGENE_AHCI_V1;
> > > const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
> > > &xgene_ahci_v2_port_info };
> > > @@ -778,10 +775,8 @@ static int xgene_ahci_probe(struct platform_device *pdev)
> > > ctx->csr_mux = csr;
> > > }
> > >
> > > - of_devid = of_match_device(xgene_ahci_of_match, dev);
> > > - if (of_devid) {
> > > - if (of_devid->data)
> > > - version = (unsigned long) of_devid->data;
> > > + if (dev->of_node) {
> > > + version = (enum xgene_ahci_version)of_device_get_match_data(dev);
> > > }
> >
> > Nit: braces can be removed.
> >
> > > #ifdef CONFIG_ACPI
> > > else {
>
> Coding style says otherwise when the 'else' has braces.
Hello Rob,
I know what the coding style says when the 'else' has braces.
I simply missed that there was an else with braces, since there was a
closing brace on a line by itself. The coding style says that the closing
brace should be on the same line as the 'else':
https://www.kernel.org/doc/html/latest/process/coding-style.html#placing-braces-and-spaces
But I guess that isn't followed because of the #ifdef CONFIG_ACPI.
I guess a better option would be to use if (IS_ENABLED(CONFIG_ACPI))
instead of #ifdef CONFIG_ACPI, but that is orthogonal to your change,
so let's ignore my nit. I've given my R-b tag on the patch already.
Kind regards,
Niklas
On 10/7/23 06:44, Rob Herring wrote:
> Use preferred of_device_get_match_data() instead of of_match_device() to
> get the driver match data. With this, adjust the includes to explicitly
> include the correct headers.
>
> Signed-off-by: Rob Herring <[email protected]>
Applied to for-6.7. Thanks !
> ---
> Perhaps device_get_match_data() could be used here and all the ACPI
> specific code dropped, but not sure if all the ACPI code is really
> necessary.
Will have a look at that.
--
Damien Le Moal
Western Digital Research