2015-04-10 01:10:44

by Mitchel Humpherys

[permalink] [raw]
Subject: [PATCH v2 1/2] staging: ion: chunk_heap: use pr_debug for heap creation print

We're currently printing to the kernel log at `info' level when we
successfully create the chunk heap, but success messages should be done
at `debug' level. Fix this.

Signed-off-by: Mitchel Humpherys <[email protected]>
---
drivers/staging/android/ion/ion_chunk_heap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/android/ion/ion_chunk_heap.c b/drivers/staging/android/ion/ion_chunk_heap.c
index 3e6ec2ee6802..54746157d799 100644
--- a/drivers/staging/android/ion/ion_chunk_heap.c
+++ b/drivers/staging/android/ion/ion_chunk_heap.c
@@ -173,7 +173,7 @@ struct ion_heap *ion_chunk_heap_create(struct ion_platform_heap *heap_data)
chunk_heap->heap.ops = &chunk_heap_ops;
chunk_heap->heap.type = ION_HEAP_TYPE_CHUNK;
chunk_heap->heap.flags = ION_HEAP_FLAG_DEFER_FREE;
- pr_info("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
+ pr_debug("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
heap_data->size, heap_data->align);

return &chunk_heap->heap;
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


2015-04-10 01:10:52

by Mitchel Humpherys

[permalink] [raw]
Subject: [PATCH v2 2/2] staging: ion: chunk_heap: use %pad for printing dma_addr_t's

We're currently using %lu and %ld to print some variables of type
dma_addr_t, which results in the following warning when dma_addr_t is
64-bits wide:

drivers/staging/android/ion/ion_chunk_heap.c: In function 'ion_chunk_heap_create':
drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
pr_info("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
^
drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'dma_addr_t' [-Wformat=]

Fix this by using %pad as instructed in printk-formats.txt.

Signed-off-by: Mitchel Humpherys <[email protected]>
---
drivers/staging/android/ion/ion_chunk_heap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/ion/ion_chunk_heap.c b/drivers/staging/android/ion/ion_chunk_heap.c
index 54746157d799..6b3e18aa1c64 100644
--- a/drivers/staging/android/ion/ion_chunk_heap.c
+++ b/drivers/staging/android/ion/ion_chunk_heap.c
@@ -173,8 +173,8 @@ struct ion_heap *ion_chunk_heap_create(struct ion_platform_heap *heap_data)
chunk_heap->heap.ops = &chunk_heap_ops;
chunk_heap->heap.type = ION_HEAP_TYPE_CHUNK;
chunk_heap->heap.flags = ION_HEAP_FLAG_DEFER_FREE;
- pr_debug("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
- heap_data->size, heap_data->align);
+ pr_debug("%s: base %pad size %zu align %pad\n", __func__,
+ &chunk_heap->base, heap_data->size, &heap_data->align);

return &chunk_heap->heap;

--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

2015-05-04 08:23:08

by Dan Carpenter

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] staging: ion: chunk_heap: use %pad for printing dma_addr_t's

On Thu, Apr 09, 2015 at 06:10:04PM -0700, Mitchel Humpherys wrote:
> We're currently using %lu and %ld to print some variables of type
> dma_addr_t, which results in the following warning when dma_addr_t is
> 64-bits wide:
>
> drivers/staging/android/ion/ion_chunk_heap.c: In function 'ion_chunk_heap_create':
> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
> pr_info("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
> ^
> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'dma_addr_t' [-Wformat=]
>
> Fix this by using %pad as instructed in printk-formats.txt.
>
> Signed-off-by: Mitchel Humpherys <[email protected]>

This one was just merged and I was about to email you that it introduces
some new Smatch warnings, but actually looking at it, it's just wrong.

We want to print "chunk_heap->base" and not "&chunk_heap->base".

And anyway "&chunk_heap->base" is a regular pointer, not a dma_addr_t.

So please send a new patch that removes the &.

regards,
dan carpenter

> ---
> drivers/staging/android/ion/ion_chunk_heap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/android/ion/ion_chunk_heap.c b/drivers/staging/android/ion/ion_chunk_heap.c
> index 54746157d799..6b3e18aa1c64 100644
> --- a/drivers/staging/android/ion/ion_chunk_heap.c
> +++ b/drivers/staging/android/ion/ion_chunk_heap.c
> @@ -173,8 +173,8 @@ struct ion_heap *ion_chunk_heap_create(struct ion_platform_heap *heap_data)
> chunk_heap->heap.ops = &chunk_heap_ops;
> chunk_heap->heap.type = ION_HEAP_TYPE_CHUNK;
> chunk_heap->heap.flags = ION_HEAP_FLAG_DEFER_FREE;
> - pr_debug("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
> - heap_data->size, heap_data->align);
> + pr_debug("%s: base %pad size %zu align %pad\n", __func__,
> + &chunk_heap->base, heap_data->size, &heap_data->align);
>
> return &chunk_heap->heap;
>
> --
> Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
> _______________________________________________
> devel mailing list
> [email protected]
> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

2015-05-04 20:05:55

by Colin Cross

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] staging: ion: chunk_heap: use %pad for printing dma_addr_t's

On Mon, May 4, 2015 at 1:22 AM, Dan Carpenter <[email protected]> wrote:
> On Thu, Apr 09, 2015 at 06:10:04PM -0700, Mitchel Humpherys wrote:
>> We're currently using %lu and %ld to print some variables of type
>> dma_addr_t, which results in the following warning when dma_addr_t is
>> 64-bits wide:
>>
>> drivers/staging/android/ion/ion_chunk_heap.c: In function 'ion_chunk_heap_create':
>> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
>> pr_info("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
>> ^
>> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'dma_addr_t' [-Wformat=]
>>
>> Fix this by using %pad as instructed in printk-formats.txt.
>>
>> Signed-off-by: Mitchel Humpherys <[email protected]>
>
> This one was just merged and I was about to email you that it introduces
> some new Smatch warnings, but actually looking at it, it's just wrong.
>
> We want to print "chunk_heap->base" and not "&chunk_heap->base".

This would be correct if base was a dma_addr_t...

> And anyway "&chunk_heap->base" is a regular pointer, not a dma_addr_t.

But it is actually an ion_phys_addr_t, which is currently typedef'd to
unsigned long. Are you using a local patch that replaces
ion_phys_addr_t with dma_addr_t?

> So please send a new patch that removes the &.

Removing the & is not correct, lib/vsprintf.c will dereference the arg
for %pad or %pap. I think this patch should just be dropped, the old
%lu was correct for what is in Linus' tree.

> regards,
> dan carpenter
>
>> ---
>> drivers/staging/android/ion/ion_chunk_heap.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/staging/android/ion/ion_chunk_heap.c b/drivers/staging/android/ion/ion_chunk_heap.c
>> index 54746157d799..6b3e18aa1c64 100644
>> --- a/drivers/staging/android/ion/ion_chunk_heap.c
>> +++ b/drivers/staging/android/ion/ion_chunk_heap.c
>> @@ -173,8 +173,8 @@ struct ion_heap *ion_chunk_heap_create(struct ion_platform_heap *heap_data)
>> chunk_heap->heap.ops = &chunk_heap_ops;
>> chunk_heap->heap.type = ION_HEAP_TYPE_CHUNK;
>> chunk_heap->heap.flags = ION_HEAP_FLAG_DEFER_FREE;
>> - pr_debug("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
>> - heap_data->size, heap_data->align);
>> + pr_debug("%s: base %pad size %zu align %pad\n", __func__,
>> + &chunk_heap->base, heap_data->size, &heap_data->align);
>>
>> return &chunk_heap->heap;
>>
>> --
>> Qualcomm Innovation Center, Inc.
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>
>> _______________________________________________
>> devel mailing list
>> [email protected]
>> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
>
> To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].

+

2015-05-05 05:59:50

by Mitchel Humpherys

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] staging: ion: chunk_heap: use %pad for printing dma_addr_t's

On Mon, May 04 2015 at 01:05:50 PM, Colin Cross <[email protected]> wrote:
> On Mon, May 4, 2015 at 1:22 AM, Dan Carpenter <[email protected]> wrote:
>> On Thu, Apr 09, 2015 at 06:10:04PM -0700, Mitchel Humpherys wrote:
>>> We're currently using %lu and %ld to print some variables of type
>>> dma_addr_t, which results in the following warning when dma_addr_t is
>>> 64-bits wide:
>>>
>>> drivers/staging/android/ion/ion_chunk_heap.c: In function 'ion_chunk_heap_create':
>>> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
>>> pr_info("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
>>> ^
>>> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'dma_addr_t' [-Wformat=]
>>>
>>> Fix this by using %pad as instructed in printk-formats.txt.
>>>
>>> Signed-off-by: Mitchel Humpherys <[email protected]>
>>
>> This one was just merged and I was about to email you that it introduces
>> some new Smatch warnings, but actually looking at it, it's just wrong.
>>
>> We want to print "chunk_heap->base" and not "&chunk_heap->base".
>
> This would be correct if base was a dma_addr_t...
>
>> And anyway "&chunk_heap->base" is a regular pointer, not a dma_addr_t.
>
> But it is actually an ion_phys_addr_t, which is currently typedef'd to
> unsigned long. Are you using a local patch that replaces
> ion_phys_addr_t with dma_addr_t?
>
>> So please send a new patch that removes the &.
>
> Removing the & is not correct, lib/vsprintf.c will dereference the arg
> for %pad or %pap. I think this patch should just be dropped, the old
> %lu was correct for what is in Linus' tree.

Ah, you're absolutely correct. We have a local patch that makes
ion_phys_addr_t a dma_addr_t (needed for LPAE), which is why I needed to
convert the printk format...

Greg, can you please drop this patch from your tree? We'll only need
this if/when mainline Ion gets LPAE support...


-Mitch

--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

2015-05-08 07:26:33

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] staging: ion: chunk_heap: use %pad for printing dma_addr_t's

On Mon, May 04, 2015 at 10:59:39PM -0700, Mitchel Humpherys wrote:
> On Mon, May 04 2015 at 01:05:50 PM, Colin Cross <[email protected]> wrote:
> > On Mon, May 4, 2015 at 1:22 AM, Dan Carpenter <[email protected]> wrote:
> >> On Thu, Apr 09, 2015 at 06:10:04PM -0700, Mitchel Humpherys wrote:
> >>> We're currently using %lu and %ld to print some variables of type
> >>> dma_addr_t, which results in the following warning when dma_addr_t is
> >>> 64-bits wide:
> >>>
> >>> drivers/staging/android/ion/ion_chunk_heap.c: In function 'ion_chunk_heap_create':
> >>> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=]
> >>> pr_info("%s: base %lu size %zu align %ld\n", __func__, chunk_heap->base,
> >>> ^
> >>> drivers/staging/android/ion/ion_chunk_heap.c:176:2: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'dma_addr_t' [-Wformat=]
> >>>
> >>> Fix this by using %pad as instructed in printk-formats.txt.
> >>>
> >>> Signed-off-by: Mitchel Humpherys <[email protected]>
> >>
> >> This one was just merged and I was about to email you that it introduces
> >> some new Smatch warnings, but actually looking at it, it's just wrong.
> >>
> >> We want to print "chunk_heap->base" and not "&chunk_heap->base".
> >
> > This would be correct if base was a dma_addr_t...
> >
> >> And anyway "&chunk_heap->base" is a regular pointer, not a dma_addr_t.
> >
> > But it is actually an ion_phys_addr_t, which is currently typedef'd to
> > unsigned long. Are you using a local patch that replaces
> > ion_phys_addr_t with dma_addr_t?
> >
> >> So please send a new patch that removes the &.
> >
> > Removing the & is not correct, lib/vsprintf.c will dereference the arg
> > for %pad or %pap. I think this patch should just be dropped, the old
> > %lu was correct for what is in Linus' tree.
>
> Ah, you're absolutely correct. We have a local patch that makes
> ion_phys_addr_t a dma_addr_t (needed for LPAE), which is why I needed to
> convert the printk format...
>
> Greg, can you please drop this patch from your tree? We'll only need
> this if/when mainline Ion gets LPAE support...

Now dropped, thanks.

greg k-h