2015-07-07 05:37:24

by duson

[permalink] [raw]
Subject: [PATCH] Input: elan_i2c - Change the hover event from MT to ST

We want the hover event like BTN_LEFT, even no contract object,
it still can be reported to upper OS system.

Signed-off by: Duson Lin <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 62641f2..5b5f403 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -771,7 +771,7 @@ static const struct attribute_group *elan_sysfs_groups[] = {
*/
static void elan_report_contact(struct elan_tp_data *data,
int contact_num, bool contact_valid,
- bool hover_event, u8 *finger_data)
+ u8 *finger_data)
{
struct input_dev *input = data->input;
unsigned int pos_x, pos_y;
@@ -815,9 +815,7 @@ static void elan_report_contact(struct elan_tp_data *data,
input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
input_report_abs(input, ABS_MT_POSITION_X, pos_x);
input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y);
- input_report_abs(input, ABS_MT_DISTANCE, hover_event);
- input_report_abs(input, ABS_MT_PRESSURE,
- hover_event ? 0 : scaled_pressure);
+ input_report_abs(input, ABS_MT_PRESSURE, scaled_pressure);
input_report_abs(input, ABS_TOOL_WIDTH, mk_x);
input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
@@ -839,14 +837,14 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
hover_event = hover_info & 0x40;
for (i = 0; i < ETP_MAX_FINGERS; i++) {
contact_valid = tp_info & (1U << (3 + i));
- elan_report_contact(data, i, contact_valid, hover_event,
- finger_data);
+ elan_report_contact(data, i, contact_valid, finger_data);

if (contact_valid)
finger_data += ETP_FINGER_DATA_LEN;
}

input_report_key(input, BTN_LEFT, tp_info & 0x01);
+ input_report_abs(input, ABS_DISTANCE, hover_event != 0);
input_mt_report_pointer_emulation(input, true);
input_sync(input);
}
@@ -922,6 +920,7 @@ static int elan_setup_input_device(struct elan_tp_data *data)
input_abs_set_res(input, ABS_Y, data->y_res);
input_set_abs_params(input, ABS_PRESSURE, 0, ETP_MAX_PRESSURE, 0, 0);
input_set_abs_params(input, ABS_TOOL_WIDTH, 0, ETP_FINGER_WIDTH, 0, 0);
+ input_set_abs_params(input, ABS_DISTANCE, 0, 1, 0, 0);

/* And MT parameters */
input_set_abs_params(input, ABS_MT_POSITION_X, 0, data->max_x, 0, 0);
@@ -934,7 +933,6 @@ static int elan_setup_input_device(struct elan_tp_data *data)
ETP_FINGER_WIDTH * max_width, 0, 0);
input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0,
ETP_FINGER_WIDTH * min_width, 0, 0);
- input_set_abs_params(input, ABS_MT_DISTANCE, 0, 1, 0, 0);

data->input = input;





2015-07-07 18:06:38

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST

On Tue, Jul 07, 2015 at 01:37:14PM +0800, duson wrote:
> We want the hover event like BTN_LEFT, even no contract object,
> it still can be reported to upper OS system.
>
> Signed-off by: Duson Lin <[email protected]>

Applied, thank you.

> ---
> drivers/input/mouse/elan_i2c_core.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
> index 62641f2..5b5f403 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -771,7 +771,7 @@ static const struct attribute_group *elan_sysfs_groups[] = {
> */
> static void elan_report_contact(struct elan_tp_data *data,
> int contact_num, bool contact_valid,
> - bool hover_event, u8 *finger_data)
> + u8 *finger_data)
> {
> struct input_dev *input = data->input;
> unsigned int pos_x, pos_y;
> @@ -815,9 +815,7 @@ static void elan_report_contact(struct elan_tp_data *data,
> input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
> input_report_abs(input, ABS_MT_POSITION_X, pos_x);
> input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y);
> - input_report_abs(input, ABS_MT_DISTANCE, hover_event);
> - input_report_abs(input, ABS_MT_PRESSURE,
> - hover_event ? 0 : scaled_pressure);
> + input_report_abs(input, ABS_MT_PRESSURE, scaled_pressure);
> input_report_abs(input, ABS_TOOL_WIDTH, mk_x);
> input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
> input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
> @@ -839,14 +837,14 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
> hover_event = hover_info & 0x40;
> for (i = 0; i < ETP_MAX_FINGERS; i++) {
> contact_valid = tp_info & (1U << (3 + i));
> - elan_report_contact(data, i, contact_valid, hover_event,
> - finger_data);
> + elan_report_contact(data, i, contact_valid, finger_data);
>
> if (contact_valid)
> finger_data += ETP_FINGER_DATA_LEN;
> }
>
> input_report_key(input, BTN_LEFT, tp_info & 0x01);
> + input_report_abs(input, ABS_DISTANCE, hover_event != 0);
> input_mt_report_pointer_emulation(input, true);
> input_sync(input);
> }
> @@ -922,6 +920,7 @@ static int elan_setup_input_device(struct elan_tp_data *data)
> input_abs_set_res(input, ABS_Y, data->y_res);
> input_set_abs_params(input, ABS_PRESSURE, 0, ETP_MAX_PRESSURE, 0, 0);
> input_set_abs_params(input, ABS_TOOL_WIDTH, 0, ETP_FINGER_WIDTH, 0, 0);
> + input_set_abs_params(input, ABS_DISTANCE, 0, 1, 0, 0);
>
> /* And MT parameters */
> input_set_abs_params(input, ABS_MT_POSITION_X, 0, data->max_x, 0, 0);
> @@ -934,7 +933,6 @@ static int elan_setup_input_device(struct elan_tp_data *data)
> ETP_FINGER_WIDTH * max_width, 0, 0);
> input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0,
> ETP_FINGER_WIDTH * min_width, 0, 0);
> - input_set_abs_params(input, ABS_MT_DISTANCE, 0, 1, 0, 0);
>
> data->input = input;
>
>
>
>
>

--
Dmitry

2015-07-08 22:58:49

by Benjamin Tissoires

[permalink] [raw]
Subject: Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST

On Tue, Jul 7, 2015 at 2:06 PM, Dmitry Torokhov
<[email protected]> wrote:
> On Tue, Jul 07, 2015 at 01:37:14PM +0800, duson wrote:
>> We want the hover event like BTN_LEFT, even no contract object,
>> it still can be reported to upper OS system.
>>
>> Signed-off by: Duson Lin <[email protected]>
>
> Applied, thank you.

Sorry for waking up too late but I am not sure we want this patch.

Why do we need to remove the ABS_MT_DISTANCE bits? I can understand
that we would want to to have ABS_DISTANCE for the pointer emulation,
but removing the per-finger information does not make much sense.
libinput knows now how to deal with per-finger hovering through
ABS_MT_DISTANCE, and you are just breaking the touchpad/screens with
this patch.

Cheers,
Benjamin

>
>> ---
>> drivers/input/mouse/elan_i2c_core.c | 12 +++++-------
>> 1 file changed, 5 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
>> index 62641f2..5b5f403 100644
>> --- a/drivers/input/mouse/elan_i2c_core.c
>> +++ b/drivers/input/mouse/elan_i2c_core.c
>> @@ -771,7 +771,7 @@ static const struct attribute_group *elan_sysfs_groups[] = {
>> */
>> static void elan_report_contact(struct elan_tp_data *data,
>> int contact_num, bool contact_valid,
>> - bool hover_event, u8 *finger_data)
>> + u8 *finger_data)
>> {
>> struct input_dev *input = data->input;
>> unsigned int pos_x, pos_y;
>> @@ -815,9 +815,7 @@ static void elan_report_contact(struct elan_tp_data *data,
>> input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
>> input_report_abs(input, ABS_MT_POSITION_X, pos_x);
>> input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y);
>> - input_report_abs(input, ABS_MT_DISTANCE, hover_event);
>> - input_report_abs(input, ABS_MT_PRESSURE,
>> - hover_event ? 0 : scaled_pressure);
>> + input_report_abs(input, ABS_MT_PRESSURE, scaled_pressure);
>> input_report_abs(input, ABS_TOOL_WIDTH, mk_x);
>> input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
>> input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
>> @@ -839,14 +837,14 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
>> hover_event = hover_info & 0x40;
>> for (i = 0; i < ETP_MAX_FINGERS; i++) {
>> contact_valid = tp_info & (1U << (3 + i));
>> - elan_report_contact(data, i, contact_valid, hover_event,
>> - finger_data);
>> + elan_report_contact(data, i, contact_valid, finger_data);
>>
>> if (contact_valid)
>> finger_data += ETP_FINGER_DATA_LEN;
>> }
>>
>> input_report_key(input, BTN_LEFT, tp_info & 0x01);
>> + input_report_abs(input, ABS_DISTANCE, hover_event != 0);
>> input_mt_report_pointer_emulation(input, true);
>> input_sync(input);
>> }
>> @@ -922,6 +920,7 @@ static int elan_setup_input_device(struct elan_tp_data *data)
>> input_abs_set_res(input, ABS_Y, data->y_res);
>> input_set_abs_params(input, ABS_PRESSURE, 0, ETP_MAX_PRESSURE, 0, 0);
>> input_set_abs_params(input, ABS_TOOL_WIDTH, 0, ETP_FINGER_WIDTH, 0, 0);
>> + input_set_abs_params(input, ABS_DISTANCE, 0, 1, 0, 0);
>>
>> /* And MT parameters */
>> input_set_abs_params(input, ABS_MT_POSITION_X, 0, data->max_x, 0, 0);
>> @@ -934,7 +933,6 @@ static int elan_setup_input_device(struct elan_tp_data *data)
>> ETP_FINGER_WIDTH * max_width, 0, 0);
>> input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0,
>> ETP_FINGER_WIDTH * min_width, 0, 0);
>> - input_set_abs_params(input, ABS_MT_DISTANCE, 0, 1, 0, 0);
>>
>> data->input = input;
>>
>>
>>
>>
>>
>
> --
> Dmitry
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

2015-07-08 23:12:05

by Dmitry Torokhov

[permalink] [raw]
Subject: Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST

On Wed, Jul 08, 2015 at 06:58:36PM -0400, Benjamin Tissoires wrote:
> On Tue, Jul 7, 2015 at 2:06 PM, Dmitry Torokhov
> <[email protected]> wrote:
> > On Tue, Jul 07, 2015 at 01:37:14PM +0800, duson wrote:
> >> We want the hover event like BTN_LEFT, even no contract object,
> >> it still can be reported to upper OS system.
> >>
> >> Signed-off by: Duson Lin <[email protected]>
> >
> > Applied, thank you.
>
> Sorry for waking up too late but I am not sure we want this patch.
>
> Why do we need to remove the ABS_MT_DISTANCE bits? I can understand
> that we would want to to have ABS_DISTANCE for the pointer emulation,
> but removing the per-finger information does not make much sense.
> libinput knows now how to deal with per-finger hovering through
> ABS_MT_DISTANCE, and you are just breaking the touchpad/screens with
> this patch.

Because the device does not provide per-finger information about
hovering. It can only tell that there is "something" hovering over the
surface, but it doe snot provide the data that there are 2 fingers
hovering or that finger 1 was in contact but now is hovering, etc.

Thanks.

--
Dmitry

2015-07-08 23:25:02

by Benjamin Tissoires

[permalink] [raw]
Subject: Re: [PATCH] Input: elan_i2c - Change the hover event from MT to ST

On Wed, Jul 8, 2015 at 7:11 PM, Dmitry Torokhov
<[email protected]> wrote:
> On Wed, Jul 08, 2015 at 06:58:36PM -0400, Benjamin Tissoires wrote:
>> On Tue, Jul 7, 2015 at 2:06 PM, Dmitry Torokhov
>> <[email protected]> wrote:
>> > On Tue, Jul 07, 2015 at 01:37:14PM +0800, duson wrote:
>> >> We want the hover event like BTN_LEFT, even no contract object,
>> >> it still can be reported to upper OS system.
>> >>
>> >> Signed-off by: Duson Lin <[email protected]>
>> >
>> > Applied, thank you.
>>
>> Sorry for waking up too late but I am not sure we want this patch.
>>
>> Why do we need to remove the ABS_MT_DISTANCE bits? I can understand
>> that we would want to to have ABS_DISTANCE for the pointer emulation,
>> but removing the per-finger information does not make much sense.
>> libinput knows now how to deal with per-finger hovering through
>> ABS_MT_DISTANCE, and you are just breaking the touchpad/screens with
>> this patch.
>
> Because the device does not provide per-finger information about
> hovering. It can only tell that there is "something" hovering over the
> surface, but it doe snot provide the data that there are 2 fingers
> hovering or that finger 1 was in contact but now is hovering, etc.
>

OK, I see now. I have then no opinion on the patch itself (not sure
any client uses ABS_DISTANCE) :)

Cheers,
Benjamin