The NAU88L25 is an ultra-low power high performance audio codec designed
for smartphone, tablet PC, and other portable devices by Nuvoton, now
add linux driver support for it.
Signed-off-by: Chih-Chiang Chang <[email protected]>
---
v3->v2:
- fix the wrong definition of reg_default
- fix the flow of set_sys_clk() and nau8825_set_bias_level()
- remove unnecessary code in nau8825_volatile_register() and nau8825_i2c_probe()
- add trigger function for ADC/DAC control
- add some register definitions
- fix some coding style issues
v2->v1:
- fixes according to Lars-Peter Clausen's review comments
- removes unused platform data file
- corrects the naming of DAPM input widget
- fixes some wrong coding of SOC widgets and other codes
- adds definition and remark for config FLL clock
- moves the code of reset hardware registers from codec_probe() to i2c_probe()
- removes unused codes
sound/soc/codecs/Kconfig | 5 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/nau8825.c | 724 +++++++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/nau8825.h | 399 +++++++++++++++++++++++++
4 files changed, 1130 insertions(+)
create mode 100644 sound/soc/codecs/nau8825.c
create mode 100644 sound/soc/codecs/nau8825.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index efaafce..1edb781 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -76,6 +76,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_MAX9877 if I2C
select SND_SOC_MC13783 if MFD_MC13XXX
select SND_SOC_ML26124 if I2C
+ select SND_SOC_NAU8825 if I2C
select SND_SOC_HDMI_CODEC
select SND_SOC_PCM1681 if I2C
select SND_SOC_PCM1792A if SPI_MASTER
@@ -470,6 +471,10 @@ config SND_SOC_MAX98925
config SND_SOC_MAX9850
tristate
+config SND_SOC_NAU8825
+ tristate "Nuvoton NAU8825 CODEC"
+ depends on I2C
+
config SND_SOC_PCM1681
tristate "Texas Instruments PCM1681 CODEC"
depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index cf160d9..db0a4ec 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -69,6 +69,7 @@ snd-soc-max98925-objs := max98925.o
snd-soc-max9850-objs := max9850.o
snd-soc-mc13783-objs := mc13783.o
snd-soc-ml26124-objs := ml26124.o
+snd-soc-nau8825-objs := nau8825.o
snd-soc-hdmi-codec-objs := hdmi.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm1792a-codec-objs := pcm1792a.o
@@ -256,6 +257,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
+obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM1792A) += snd-soc-pcm1792a-codec.o
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
new file mode 100644
index 0000000..d3b306a
--- /dev/null
+++ b/sound/soc/codecs/nau8825.c
@@ -0,0 +1,724 @@
+/*
+ * nau8825.c
+ *
+ * Copyright 2015 Nuvoton Technology Corp.
+ * Author: Meng-Huang Kuo <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/acpi.h>
+#include <asm/div64.h>
+#include <sound/jack.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <linux/delay.h>
+#include "nau8825.h"
+
+static const DECLARE_TLV_DB_SCALE(out_hp_vol_tlv, -5400, 100, 0);
+static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -10350, 50, 0);
+
+static const struct snd_kcontrol_new nau8825_snd_controls[] = {
+ SOC_SINGLE_TLV("MIC Volume", NAU8825_ADC_DGAIN_CTRL,
+ NAU8825_ADC_DGAIN_SFT,
+ NAU8825_ADC_VOL_RSCL_RANGE, 0, adc_vol_tlv),
+ SOC_DOUBLE_TLV("HP Volume", NAU8825_HSVOL_CTRL,
+ NAU8825_L_HSVOL_SFT, NAU8825_R_HSVOL_SFT,
+ NAU8825_VOL_RSCL_RANGE, 1, out_hp_vol_tlv),
+};
+
+static const struct snd_kcontrol_new nau8825_hpo_mix[] = {
+ SOC_DAPM_SINGLE("HP L Switch", NAU8825_HSVOL_CTRL,
+ NAU8825_L_MUTE_SFT, 1, 1),
+ SOC_DAPM_SINGLE("HP R Switch", NAU8825_HSVOL_CTRL,
+ NAU8825_R_MUTE_SFT, 1, 1),
+};
+
+static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
+ /* Input */
+ SND_SOC_DAPM_INPUT("MIC"),
+ SND_SOC_DAPM_SUPPLY("MIC BIAS", NAU8825_BOOST, NAU8825_G_BIAS_SFT, 0,
+ NULL, 0),
+ /* Audio Interface */
+ SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
+ /* DACs */
+ SND_SOC_DAPM_DAC("DAC L1", NULL, NAU8825_DAC_CTRL,
+ NAU8825_DAC_L_SFT, 0),
+ SND_SOC_DAPM_DAC("DAC R1", NULL, NAU8825_DAC_CTRL,
+ NAU8825_DAC_R_SFT, 0),
+ /* SPO/HPO/LOUT/Mono Mixer */
+ SND_SOC_DAPM_MIXER("HPO MIX", SND_SOC_NOPM, 0, 0, nau8825_hpo_mix,
+ ARRAY_SIZE(nau8825_hpo_mix)),
+ SND_SOC_DAPM_SUPPLY("HP amp", NAU8825_CLASSG_CTRL,
+ NAU8825_CLASSG_EN_SHIFT, 0, NULL, 0),
+ /* Output */
+ SND_SOC_DAPM_OUTPUT("HPOL"),
+ SND_SOC_DAPM_OUTPUT("HPOR"),
+};
+
+static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
+ {"AIF1TX", NULL, "MIC"},
+ {"DAC L1", NULL, "AIF1RX"},
+ {"DAC R1", NULL, "AIF1RX"},
+ {"HPO MIX", "HP L Switch", "DAC L1"},
+ {"HPO MIX", "HP R Switch", "DAC R1"},
+ {"HPOL", NULL, "HPO MIX"},
+ {"HPOR", NULL, "HPO MIX"},
+ {"HPOL", NULL, "HP amp"},
+ {"HPOR", NULL, "HP amp"},
+};
+
+static int nau8825_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+ unsigned int val_len = 0;
+
+ switch (params_width(params)) {
+ case 16:
+ break;
+ case 20:
+ val_len |= NAU8825_I2S_DL_20;
+ break;
+ case 24:
+ val_len |= NAU8825_I2S_DL_24;
+ break;
+ case 32:
+ val_len |= NAU8825_I2S_DL_32;
+ break;
+ default:
+ return -EINVAL;
+ }
+ regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_1,
+ NAU8825_I2S_DL_MASK, val_len);
+ return 0;
+}
+
+static int nau8825_dac_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ if (mute)
+ regmap_update_bits(nau8825->regmap, NAU8825_DAC_MUTE_CTRL,
+ NAU8825_SOFT_MUTE_MASK, NAU8825_SOFT_MUTE_EN);
+ else
+ regmap_update_bits(nau8825->regmap, NAU8825_DAC_MUTE_CTRL,
+ NAU8825_SOFT_MUTE_MASK, NAU8825_SOFT_MUTE_DIS);
+ return 0;
+}
+
+static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+ unsigned int reg_val = 0;
+
+ dev_dbg(codec->dev, " %s ###nau8825_set_dai_fmt %x\n", __func__, fmt);
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ reg_val |= NAU8825_I2S_BP_INV;
+ break;
+ default:
+ dev_alert(codec->dev, "Invalid DAI interface format\n");
+ return -EINVAL;
+ }
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ reg_val |= NAU8825_I2S_DF_I2S;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ reg_val |= NAU8825_I2S_DF_LEFT;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ reg_val |= NAU8825_I2S_DF_RIGHT;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ reg_val |= NAU8825_I2S_DF_PCM_A;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ reg_val |= NAU8825_I2S_DF_PCM_B;
+ reg_val |= NAU8825_I2S_PCMB_EN;
+ break;
+ default:
+ dev_alert(codec->dev, "Invalid DAI I2S/PCM format\n");
+ return -EINVAL;
+ }
+ regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_1,
+ NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK
+ | NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK,
+ reg_val);
+ return 0;
+}
+
+static void config_fll_clk_12m(struct snd_soc_codec *codec)
+{
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
+ NAU8825_CLK_MCLK_SRC_MASK, 0x0003);
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_1,
+ NAU8825_FLL_RATIO_MASK, 0x0001);
+ /* FLL 16-bit fractional input */
+ regmap_write(nau8825->regmap, NAU8825_FLL_2, 0xc49b);
+ /* FLL 10-bit integer input */
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_3,
+ NAU8825_FLL_INTEGER_MASK, 0x0020);
+ /* FLL pre-scaler */
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_4,
+ NAU8825_FLL_REF_DIV_MASK, 0x0800);
+ /* select divied VCO input */
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_5,
+ NAU8825_FLL_FILTER_SW_MASK, 0x0000);
+ /* FLL sigma delta modulator enable */
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
+ NAU8825_SDM_EN_MASK, 0x4000);
+}
+
+static void set_sys_clk(struct snd_soc_codec *codec, int sys_clk)
+{
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ pr_debug("%s :: sys_clk=%x\n", __func__, sys_clk);
+ switch (sys_clk) {
+ case NAU8825_INTERNALCLOCK:
+ regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
+ NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_DIS);
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
+ NAU8825_DCO_EN_MASK, NAU8825_DCO_EN);
+ regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
+ NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_EN);
+ break;
+ case NAU8825_MCLK:
+ default:
+ regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
+ NAU8825_DCO_EN_MASK, NAU8825_DCO_DIS);
+ regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
+ /* FLL clock source from MCLK */
+ regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
+ NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_DIS);
+ mdelay(2);
+ regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
+ NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_EN);
+ break;
+ }
+}
+
+static int nau8825_dai_set_sysclk(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ switch (clk_id) {
+ case NAU8825_MCLK:
+ config_fll_clk_12m(codec);
+ set_sys_clk(codec, clk_id);
+ break;
+ case NAU8825_INTERNALCLOCK:
+ set_sys_clk(codec, clk_id);
+ break;
+ default:
+ dev_err(codec->dev, "Wrong clock src\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int nau8825_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ /* All power is driven by DAPM system*/
+ dev_dbg(codec->dev, "###nau8825_set_bias_level BIAS_ON\n");
+ regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
+ NAU8825_VMIDSEL_MASK, NAU8825_VMIDSEL_125KOHM);
+ regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
+ NAU8825_VMID_MASK, NAU8825_VMID_EN);
+ regmap_update_bits(nau8825->regmap, NAU8825_BOOST,
+ NAU8825_G_BIAS_MASK, NAU8825_G_BIAS_EN);
+ break;
+ case SND_SOC_BIAS_OFF:
+ dev_dbg(codec->dev, "###nau8825_set_bias_level OFF\n");
+ set_sys_clk(codec, NAU8825_INTERNALCLOCK);
+ regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
+ NAU8825_VMID_MASK, NAU8825_VMID_DIS);
+ regmap_update_bits(nau8825->regmap, NAU8825_BOOST,
+ NAU8825_G_BIAS_MASK, NAU8825_G_BIAS_DIS);
+ break;
+ default:
+ break;
+ }
+ codec->dapm.bias_level = level;
+ dev_dbg(codec->dev, "## nau8825_set_bias_level %d\n", level);
+ return 0;
+}
+
+
+static const struct reg_default nau8825_reg[] = {
+ {0x000, 0x0000},
+ {0x001, 0x00ff},
+ {0x003, 0x0050},
+ {0x004, 0x0000},
+ {0x005, 0x3126},
+ {0x006, 0x0008},
+ {0x007, 0x0010},
+ {0x008, 0x0000},
+ {0x009, 0x6000},
+ {0x00a, 0xf13c},
+ {0x00c, 0x000c},
+ {0x00d, 0x0000},
+ {0x00f, 0x0800},
+ {0x010, 0x0000},
+ {0x011, 0x0000},
+ {0x012, 0x0010},
+ {0x013, 0x0015},
+ {0x014, 0x0110},
+ {0x015, 0x0000},
+ {0x016, 0x0000},
+ {0x017, 0x0000},
+ {0x018, 0x0000},
+ {0x019, 0x0000},
+ {0x01a, 0x0000},
+ {0x01b, 0x0000},
+ {0x01c, 0x000b},
+ {0x01d, 0x8010},
+ {0x01e, 0x0000},
+ {0x01f, 0x0000},
+ {0x020, 0x0000},
+ {0x021, 0x0000},
+ {0x022, 0x0000},
+ {0x023, 0x0000},
+ {0x024, 0x0000},
+ {0x025, 0x0000},
+ {0x026, 0x0000},
+ {0x027, 0x0000},
+ {0x028, 0x0000},
+ {0x029, 0x0000},
+ {0x02a, 0x0000},
+ {0x02b, 0x0010},
+ {0x02c, 0x0001},
+ {0x02d, 0x0000},
+ {0x02f, 0x0000},
+ {0x030, 0x01cf},
+ {0x031, 0x0000},
+ {0x032, 0x0000},
+ {0x033, 0x00cf},
+ {0x034, 0x0000},
+ {0x038, 0x1486},
+ {0x039, 0x0f12},
+ {0x03a, 0x25ff},
+ {0x03b, 0x3457},
+ {0x045, 0x1486},
+ {0x046, 0x0f12},
+ {0x047, 0x25f9},
+ {0x048, 0x3457},
+ {0x04c, 0x0000},
+ {0x04d, 0x0000},
+ {0x050, 0x0000},
+ {0x051, 0x0000},
+ {0x055, 0x0000},
+ {0x058, 0x0000},
+ {0x059, 0x0000},
+ {0x066, 0x0000},
+ {0x068, 0x0000},
+ {0x069, 0x0000},
+ {0x06a, 0x0020},
+ {0x071, 0x0011},
+ {0x072, 0x0020},
+ {0x073, 0x0008},
+ {0x074, 0x0006},
+ {0x076, 0x0000},
+ {0x077, 0x0000},
+ {0x07f, 0x0000},
+ {0x080, 0x0300},
+ {0x081, 0x0000},
+ {0x082, 0x0000},
+};
+
+static int nau8825_codec_remove(struct snd_soc_codec *codec)
+{
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
+ regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
+ return 0;
+}
+
+static int nau8825_codec_probe(struct snd_soc_codec *codec)
+{
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ /* bias current settings */
+ regmap_write(nau8825->regmap, 0x0072, 0x0260);
+ /* enable bias */
+ nau8825_set_bias_level(codec, SND_SOC_BIAS_ON);
+ mdelay(10);
+ /* DAC digital default gain 0 dB */
+ regmap_write(nau8825->regmap, 0x0033, 0x00cf);
+ regmap_write(nau8825->regmap, 0x0034, 0x02cf);
+ /* DAC driver default gain -29 dB */
+ regmap_write(nau8825->regmap, 0x0032, 0x075d);
+ /* ADC digital default gain 8 dB */
+ regmap_write(nau8825->regmap, 0x0030, 0x00d2);
+ /* ehance I2C SDA driver strength */
+ regmap_write(nau8825->regmap, 0x0080, 0x0800);
+ /* enable ADC/DAC clocks */
+ regmap_write(nau8825->regmap, 0x0001, 0x07fd);
+ /* headphone output */
+ regmap_write(nau8825->regmap, 0x00C, 0x000c);
+ return 0;
+}
+
+static const struct snd_soc_codec_driver soc_codec_driver_nau8825 = {
+ .probe = nau8825_codec_probe,
+ .remove = nau8825_codec_remove,
+ .suspend_bias_off = true,
+ .set_bias_level = nau8825_set_bias_level,
+ .controls = nau8825_snd_controls,
+ .num_controls = ARRAY_SIZE(nau8825_snd_controls),
+ .dapm_widgets = nau8825_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets),
+ .dapm_routes = nau8825_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes),
+};
+
+static bool nau8825_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case NAU8825_RESET:
+ case NAU8825_ENA_CTRL:
+ case NAU8825_CLK_EN:
+ case NAU8825_CLK_DIVIDER:
+ case NAU8825_FLL_1:
+ case NAU8825_FLL_2:
+ case NAU8825_FLL_3:
+ case NAU8825_FLL_4:
+ case NAU8825_FLL_5:
+ case NAU8825_FLL_6:
+ case NAU8825_HEADSET_CTRL:
+ case NAU8825_JACK_DET_CTRL:
+ case NAU8825_IRQ_MASK:
+ case NAU8825_IRQ_STATUS:
+ case NAU8825_IRQ_CLEAR:
+ case NAU8825_IRQ_CTRL:
+ case NAU8825_SAR_ADC:
+ case NAU8825_VDET_COEFFICIENT:
+ case NAU8825_VDET_THRESHOLD_1:
+ case NAU8825_VDET_THRESHOLD_2:
+ case NAU8825_GPIO12_CTRL:
+ case NAU8825_GPIO34_CTRL:
+ case NAU8825_I2S_PCM_CTRL_1:
+ case NAU8825_I2S_PCM_CTRL_2:
+ case NAU8825_ADC_RATE:
+ case NAU8825_DAC_CTRL1:
+ case NAU8825_DAC_CTRL2:
+ case NAU8825_IMM_MODE_CTRL:
+ case NAU8825_IMM_RMS_VALUE:
+ case NAU8825_ADC_DGAIN_CTRL:
+ case NAU8825_DAC_MUTE_CTRL:
+ case NAU8825_HSVOL_CTRL:
+ case NAU8825_DACL_CTRL:
+ case NAU8825_DACR_CTRL:
+ case NAU8825_SAR_ADC_OUTPUT:
+ case NAU8825_ANALOG_CTRL_2:
+ case NAU8825_ANALOG_ADC_1:
+ case NAU8825_ANALOG_ADC_2:
+ case NAU8825_DAC_CTRL:
+ case NAU8825_MIC_BIAS:
+ case NAU8825_BOOST:
+ case NAU8825_CLASSG_CTRL:
+ case NAU8825_I2C_DEVICE_ID:
+ case NAU8825_BIAS_ADJ:
+ case NAU8825_POWER_UP_CTRL:
+ case NAU8825_CHARGE_BUMP_CTRL:
+ case NAU8825_CHARGE_BUMP_RD:
+ case NAU8825_GENERAL_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool nau8825_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case NAU8825_RESET:
+ case NAU8825_CLK_DIVIDER:
+ case NAU8825_FLL_1:
+ case NAU8825_FLL_2:
+ case NAU8825_FLL_3:
+ case NAU8825_FLL_4:
+ case NAU8825_FLL_5:
+ case NAU8825_FLL_6:
+ case NAU8825_ANALOG_CTRL_2:
+ case NAU8825_ANALOG_ADC_1:
+ case NAU8825_ANALOG_ADC_2:
+ case NAU8825_DAC_CTRL:
+ case NAU8825_MIC_BIAS:
+ case NAU8825_BOOST:
+ case NAU8825_CLASSG_CTRL:
+ case NAU8825_I2C_DEVICE_ID:
+ case NAU8825_BIAS_ADJ:
+ case NAU8825_POWER_UP_CTRL:
+ case NAU8825_CHARGE_BUMP_CTRL:
+ case NAU8825_GENERAL_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config nau8825_regmap = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .use_single_rw = true,
+ .max_register = NAU8825_MAX_REGISTER,
+ .volatile_reg = nau8825_volatile_register,
+ .readable_reg = nau8825_readable_register,
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = nau8825_reg,
+ .num_reg_defaults = ARRAY_SIZE(nau8825_reg),
+};
+
+static int ena_adc(struct nau8825_priv *nau8825)
+{
+ /* adc & clock settings */
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_ADC_CLK_MASK, NAU8825_ADC_CLK_EN);
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_ADC_MASK, NAU8825_ADC_EN);
+ /* adc PGA settings */
+ regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
+ NAU8825_FEPGA_GAIN_MASK, 0x1b00);
+ regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
+ NAU8825_FEPGA_MASK, NAU8825_FEPGA_EN);
+ /* mic bias output level (1.1V) */
+ regmap_update_bits(nau8825->regmap, NAU8825_MIC_BIAS,
+ NAU8825_MIC_BIAS_LVL_MSK, 0x04);
+ /* enable mic bias */
+ regmap_update_bits(nau8825->regmap, NAU8825_MIC_BIAS,
+ NAU8825_MIC_POWERUP_MSK, NAU8825_MIC_POWERUP_EN);
+ mdelay(10);
+ return 0;
+}
+
+static int dis_adc(struct nau8825_priv *nau8825)
+{
+ /* disable PGA */
+ regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
+ NAU8825_FEPGA_MASK, NAU8825_FEPGA_DIS);
+ /* adc & clock settings */
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_ADC_MASK, NAU8825_ADC_DIS);
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_ADC_CLK_MASK, NAU8825_ADC_CLK_DIS);
+ return 0;
+}
+
+static int ena_dac(struct nau8825_priv *nau8825)
+{
+ /* charge bump settings */
+ regmap_update_bits(nau8825->regmap, NAU8825_CHARGE_BUMP_CTRL,
+ 0x07ff, 0x720);
+ /* enable DAC clock */
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_DAC_CLK_MASK, NAU8825_DAC_CLK_EN);
+ /* enable DAC channel */
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_DAC_MASK, NAU8825_DAC_EN);
+ /* classG parameter settings */
+ regmap_update_bits(nau8825->regmap, NAU8825_CLASSG_CTRL,
+ ~NAU8825_CLASSG_EN_MASK, 0x2007);
+ /* enable DAC */
+ regmap_write(nau8825->regmap, NAU8825_DAC_CTRL, 0x332c);
+ /* output driver settings */
+ regmap_write(nau8825->regmap, NAU8825_POWER_UP_CTRL, 0x073c);
+ /* power up main driver */
+ regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
+ NAU8825_PUP_MAIN_MASK, NAU8825_PUP_MAIN_ENA);
+ mdelay(200);
+ /* enable charge bump */
+ regmap_update_bits(nau8825->regmap, NAU8825_CHARGE_BUMP_CTRL,
+ NAU8825_PD_DAC_MASK, NAU8825_PD_DAC_DIS);
+ return 0;
+}
+
+static int dis_dac(struct nau8825_priv *nau8825)
+{
+ /* disable charge bump */
+ regmap_update_bits(nau8825->regmap, NAU8825_CHARGE_BUMP_CTRL,
+ NAU8825_PD_DAC_MASK, NAU8825_PD_DAC_ENA);
+ /* disable classG */
+ regmap_update_bits(nau8825->regmap, NAU8825_CLASSG_CTRL,
+ NAU8825_CLASSG_PATH_MASK, NAU8825_CLASSG_PATH_DIS);
+ /* disable DAC */
+ regmap_update_bits(nau8825->regmap, NAU8825_DAC_CTRL,
+ NAU8825_DAC_LR_MASK, NAU8825_DAC_LR_DIS);
+ regmap_update_bits(nau8825->regmap, NAU8825_DAC_CTRL,
+ NAU8825_DAC_CLK_LR_MASK, NAU8825_DAC_CLK_LR_DIS);
+ /* disable output driver */
+ regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
+ 0x3f, 0x00);
+ /* disable DAC channel */
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_L_DAC_MASK, NAU8825_L_DAC_DIS);
+ /* disable DAC clock */
+ regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
+ NAU8825_DAC_CLK_MASK, NAU8825_DAC_CLK_DIS);
+ return 0;
+}
+
+static int nau8825_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ config_fll_clk_12m(codec);
+ set_sys_clk(codec, NAU8825_MCLK);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ena_dac(nau8825);
+ else
+ ena_adc(nau8825);
+ break;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dis_dac(nau8825);
+ else
+ dis_adc(nau8825);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000
+#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
+ | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops nau8825_dai_ops = {
+ .trigger = nau8825_trigger,
+ .hw_params = nau8825_hw_params,
+ .set_sysclk = nau8825_dai_set_sysclk,
+ .set_fmt = nau8825_set_dai_fmt,
+ .digital_mute = nau8825_dac_mute,
+};
+
+static struct snd_soc_dai_driver nau8825_dai_driver[] = {
+ {
+ .name = "nau8825-aif1",
+ .playback = {
+ .stream_name = "AIF1 Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = NAU8825_RATES,
+ .formats = NAU8825_FORMATS,
+ },
+ .capture = {
+ .stream_name = "AIF1 Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = NAU8825_RATES,
+ .formats = NAU8825_FORMATS,
+ },
+ .ops = &nau8825_dai_ops,
+ }
+};
+
+
+static int nau8825_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *i2c_id)
+{
+ struct nau8825_priv *nau8825;
+ int ret;
+
+ nau8825 = devm_kzalloc(&i2c->dev, sizeof(*nau8825),
+ GFP_KERNEL);
+ if (nau8825 == NULL)
+ return -ENOMEM;
+ nau8825->i2c = i2c;
+ i2c_set_clientdata(i2c, nau8825);
+ nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap);
+ if (IS_ERR(nau8825->regmap)) {
+ ret = PTR_ERR(nau8825->regmap);
+ dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
+ return ret;
+ }
+ /* software reset */
+ regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
+ regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
+
+ /* register sound card */
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_driver_nau8825,
+ nau8825_dai_driver,
+ ARRAY_SIZE(nau8825_dai_driver));
+ return ret;
+}
+
+static int nau8825_i2c_remove(struct i2c_client *i2c)
+{
+ snd_soc_unregister_codec(&i2c->dev);
+ return 0;
+}
+
+static const struct i2c_device_id nau8825_i2c_id[] = {
+ {"nau8825", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, nau8825_i2c_id);
+
+static const struct acpi_device_id nau8825_acpi_match[] = {
+ { "10508825", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match);
+
+static struct i2c_driver nau8825_i2c_driver = {
+ .driver = {
+ .name = "nau8825",
+ .owner = THIS_MODULE,
+ .acpi_match_table = ACPI_PTR(nau8825_acpi_match),
+ },
+ .probe = nau8825_i2c_probe,
+ .remove = (nau8825_i2c_remove),
+ .id_table = nau8825_i2c_id,
+};
+module_i2c_driver(nau8825_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC NAU8825 codec driver");
+MODULE_AUTHOR("Nuvoton");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h
new file mode 100644
index 0000000..3050e7c
--- /dev/null
+++ b/sound/soc/codecs/nau8825.h
@@ -0,0 +1,399 @@
+/*
+ * nau8825.h
+ *
+ * Copyright 2015 Nuvoton Technology Corp.
+ * Author: Meng-Huang Kuo <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _NAU8825_H
+#define _NAU8825_H
+
+#define NAU8825_RESET 0x00
+#define NAU8825_ENA_CTRL 0x01
+#define NAU8825_CLK_EN 0x02
+#define NAU8825_CLK_DIVIDER 0x03
+#define NAU8825_FLL_1 0x04
+#define NAU8825_FLL_2 0x05
+#define NAU8825_FLL_3 0x06
+#define NAU8825_FLL_4 0x07
+#define NAU8825_FLL_5 0x08
+#define NAU8825_FLL_6 0x09
+#define NAU8825_HEADSET_CTRL 0x0C
+#define NAU8825_JACK_DET_CTRL 0x0D
+#define NAU8825_IRQ_MASK 0x0F
+#define NAU8825_IRQ_STATUS 0x10
+#define NAU8825_IRQ_CLEAR 0x11
+#define NAU8825_BTN_STATUS 0x11
+#define NAU8825_IRQ_CTRL 0x12
+#define NAU8825_SAR_ADC 0x13
+#define NAU8825_VDET_COEFFICIENT 0x14
+#define NAU8825_VDET_THRESHOLD_1 0x15
+#define NAU8825_VDET_THRESHOLD_2 0x16
+#define NAU8825_GPIO34_CTRL 0x19
+#define NAU8825_GPIO12_CTRL 0x1A
+#define NAU8825_TDM_CTRL 0x1B
+#define NAU8825_I2S_PCM_CTRL_1 0x1C
+#define NAU8825_I2S_PCM_CTRL_2 0x1D
+#define NAU8825_BIQ_CTRL 0x20
+#define NAU8825_BIQ_COF1 0x21
+#define NAU8825_BIQ_COF2 0x22
+#define NAU8825_BIQ_COF3 0x23
+#define NAU8825_BIQ_COF4 0x24
+#define NAU8825_BIQ_COF5 0x25
+#define NAU8825_BIQ_COF6 0x26
+#define NAU8825_BIQ_COF7 0x27
+#define NAU8825_BIQ_COF8 0x28
+#define NAU8825_BIQ_COF9 0x29
+#define NAU8825_BIQ_COF10 0x2A
+#define NAU8825_ADC_RATE 0x2B
+#define NAU8825_DAC_CTRL1 0x2C
+#define NAU8825_DAC_CTRL2 0x2D
+#define NAU8825_DAC_DGAIN_CTRL 0x2F
+#define NAU8825_ADC_DGAIN_CTRL 0x30
+#define NAU8825_DAC_MUTE_CTRL 0x31
+#define NAU8825_HSVOL_CTRL 0x32
+#define NAU8825_DACL_CTRL 0x33
+#define NAU8825_DACR_CTRL 0x34
+#define NAU8825_ADC_DRC_KNEE_IP12 0x38
+#define NAU8825_ADC_DRC_KNEE_IP34 0x39
+#define NAU8825_ADC_DRC_SLOPES 0x3A
+#define NAU8825_ADC_DRC_ATKDCY 0x3B
+#define NAU8825_DAC_DRC_KNEE_IP12 0x45
+#define NAU8825_DAC_DRC_KNEE_IP34 0x46
+#define NAU8825_DAC_DRC_SLOPES 0x47
+#define NAU8825_DAC_DRC_ATKDCY 0x48
+#define NAU8825_IMM_MODE_CTRL 0x4C
+#define NAU8825_IMM_RMS_VALUE 0x4D
+#define NAU8825_CLASSG_CTRL 0x50
+#define NAU8825_I2C_DEVICE_ID 0x58
+#define NAU8825_SAR_ADC_OUTPUT 0x59
+#define NAU8825_BIAS_ADJ 0x66
+#define NAU8825_ANALOG_CTRL_2 0x6A
+#define NAU8825_ANALOG_ADC_1 0x71
+#define NAU8825_ANALOG_ADC_2 0x72
+#define NAU8825_DAC_CTRL 0x73
+#define NAU8825_MIC_BIAS 0x74
+#define NAU8825_BOOST 0x76
+#define NAU8825_POWER_UP_CTRL 0x7F
+#define NAU8825_CHARGE_BUMP_CTRL 0x80
+#define NAU8825_CHARGE_BUMP_RD 0x81
+#define NAU8825_GENERAL_STATUS 0x82
+#define NAU8825_MAX_REGISTER 0xFF
+
+/* reg. NAU8825_ENA_CTRL (0x01) */
+#define NAU8825_R_DAC_MASK (0x1 << 10)
+#define NAU8825_R_DAC_EN (0x1 << 10)
+#define NAU8825_R_DAC_DIS (0x0 << 10)
+#define NAU8825_L_DAC_MASK (0x1 << 9)
+#define NAU8825_L_DAC_EN (0x1 << 9)
+#define NAU8825_L_DAC_DIS (0x0 << 9)
+#define NAU8825_DAC_MASK (0x3 << 9)
+#define NAU8825_DAC_EN (0x3 << 9)
+#define NAU8825_DAC_DIS (0x0 << 9)
+
+#define NAU8825_R_DAC_MASK (0x1 << 10)
+#define NAU8825_R_DAC_EN (0x1 << 10)
+#define NAU8825_R_DAC_DIS (0x0 << 10)
+#define NAU8825_L_DAC_MASK (0x1 << 9)
+#define NAU8825_L_DAC_EN (0x1 << 9)
+#define NAU8825_L_DAC_DIS (0x0 << 9)
+#define NAU8825_ADC_MASK (0x1 << 8)
+#define NAU8825_ADC_EN (0x1 << 8)
+#define NAU8825_ADC_DIS (0x0 << 8)
+#define NAU8825_ADC_CLK_MASK (0x1 << 7)
+#define NAU8825_ADC_CLK_EN (0x1 << 7)
+#define NAU8825_ADC_CLK_DIS (0x0 << 7)
+#define NAU8825_DAC_CLK_MASK (0x1 << 6)
+#define NAU8825_DAC_CLK_EN (0x1 << 6)
+#define NAU8825_DAC_CLK_DIS (0x0 << 6)
+#define NAU8825_IMM_CLK_MASK (0x1 << 5)
+#define NAU8825_IMM_CLK_EN (0x1 << 5)
+#define NAU8825_IMM_CLK_DIS (0x0 << 5)
+#define NAU8825_I2S_CLK_MASK (0x1 << 4)
+#define NAU8825_I2S_CLK_EN (0x1 << 4)
+#define NAU8825_I2S_CLK_DIS (0x0 << 4)
+#define NAU8825_BIST_CLK_MASK (0x1 << 3)
+#define NAU8825_BIST_CLK_EN (0x1 << 3)
+#define NAU8825_BIST_CLK_DIS (0x0 << 3)
+#define NAU8825_OTP_CLK_MASK (0x1 << 2)
+#define NAU8825_OTP_CLK_EN (0x1 << 2)
+#define NAU8825_OTP_CLK_DIS (0x0 << 2)
+#define NAU8825_SAR_CLK_MASK (0x1 << 1)
+#define NAU8825_SAR_CLK_EN (0x1 << 1)
+#define NAU8825_SAR_CLK_DIS (0x0 << 1)
+#define NAU8825_DRC_CLK_MASK (0x1 << 0)
+#define NAU8825_DRC_CLK_EN (0x1 << 0)
+#define NAU8825_DRC_CLK_DIS (0x0 << 0)
+
+/* reg. NAU8825_CLK_DIVIDER (0x03) */
+#define NAU8825_SYSCLK_EN_MASK (0x1 << 15)
+#define NAU8825_SYSCLK_EN (0x1 << 15)
+#define NAU8825_SYSCLK_DIS (0x0 << 15)
+#define NAU8825_CLK_MCLK_SRC_MASK (0xF << 0)
+
+/* reg. NAU8825_FLL_1 (0x04) */
+#define NAU8825_FLL_RATIO_MASK (0x7F << 0)
+
+/* reg. NAU8825_FLL_3 (0x06) */
+#define NAU8825_FLL_INTEGER_MASK (0x3FF << 0)
+
+/* reg. NAU8825_FLL_4 (0x07) */
+#define NAU8825_FLL_REF_DIV_MASK (0x3 << 10)
+
+/* reg. NAU8825_FLL_5 (0x08) */
+#define NAU8825_FLL_FILTER_SW_MASK (0x1 << 14)
+
+/* reg. NAU8825_FLL_6 (0x09) */
+#define NAU8825_DCO_EN_MASK (0x1 << 15)
+#define NAU8825_DCO_EN (0x1 << 15)
+#define NAU8825_DCO_DIS (0x0 << 15)
+#define NAU8825_SDM_EN_MASK (0x1 << 14)
+
+/* reg. NAU8825_HEADSET_CTRL (0x0c) */
+#define NAU8825_RESET_HSD_MASK (0x1 << 15)
+#define NAU8825_RESET_HSD_EN (0x1 << 15)
+#define NAU8825_RESET_HSD_DIS (0x0 << 15)
+#define NAU8825_AUTO_DETECT_MASK (0x1 << 6)
+#define NAU8825_AUTO_DETECT_EN (0x1 << 6)
+#define NAU8825_AUTO_DETECT_DIS (0x0 << 6)
+#define NAU8825_MANUAL_START_MASK (0x1 << 4)
+#define NAU8825_MANUAL_START_EN (0x1 << 4)
+#define NAU8825_MANUAL_START_DIS (0x0 << 4)
+#define NAU8825_ENGND_MASK (0x3 << 2)
+
+/* reg. NAU8825_JACK_DET_CTRL (0x0d) */
+#define NAU8825_DB_BP_MODE_MASK (0x1 << 8)
+#define NAU8825_DB_BP_MODE_EN (0x1 << 8)
+#define NAU8825_DB_BP_MODE_DIS (0x0 << 8)
+
+/* reg. NAU8825_IRQ_MASK (0x0f) */
+#define NAU8825_IRQ_QE_MASK (0x1 << 11)
+#define NAU8825_IRQ_QE_EN (0x1 << 11)
+#define NAU8825_IRQ_QE_DIS (0x0 << 11)
+#define NAU8825_IRQ_EJECT_MASK (0x1 << 2)
+#define NAU8825_IRQ_EJECT_EN (0x1 << 2)
+#define NAU8825_IRQ_EJECT_DIS (0x0 << 2)
+
+
+/* reg. NAU8825_IRQ_STATUS (0x10) */
+#define NAU8825_HSD_COMPLETE_INT (0x1 << 10)
+#define NAU8825_EMRG_INT (0x1 << 9)
+#define NAU8825_RMS_INT (0x1 << 8)
+#define NAU8825_BTN_RELEASE_INT (0x1 << 7)
+#define NAU8825_LONG_BTN_INT (0x1 << 6)
+#define NAU8825_SHORT_BTN_INT (0x1 << 5)
+#define NAU8825_BTN_INT (0x7 << 5)
+#define NAU8825_MIC_DET_INT (0x1 << 4)
+#define NAU8825_JACK_EJCT_INT (0x3 << 2)
+#define NAU8825_JACK_DET_INT (0x3 << 0)
+#define NAU8825_JACK_OUT (0x1 << 2)
+#define NAU8825_JACK_IN (0x1 << 0)
+#define NAU8825_JACK_INT (0xF << 0)
+
+/* reg. NAU8825_BTN_STATUS (0x11) */
+#define NAU8825_SHORT_BTN_MASK (0xFF << 8)
+#define NAU8825_LONG_BTN_MASK (0xFF << 0)
+#define NAU8825_BTN_0 (0x01 << 0)
+#define NAU8825_BTN_1 (0x01 << 1)
+#define NAU8825_BTN_2 (0x01 << 2)
+#define NAU8825_BTN_3 (0x01 << 3)
+
+/* reg. NAU8825_IRQ_CTRL (0x12) */
+#define NAU8825_HEADSET_INT_MASK (0x1 << 10)
+#define NAU8825_HEADSET_INT_EN (0x0 << 10)
+#define NAU8825_HEADSET_INT_DIS (0x1 << 10)
+#define NAU8825_RMS_INT_MASK (0x1 << 8)
+#define NAU8825_RMS_INT_EN (0x0 << 8)
+#define NAU8825_RMS_INT_DIS (0x1 << 8)
+#define NAU8825_KEYREL_INT_MASK (0x1 << 7)
+#define NAU8825_KEYREL_INT_EN (0x0 << 7)
+#define NAU8825_KEYREL_INT_DIS (0x1 << 7)
+#define NAU8825_LONGKEY_INT_MASK (0x1 << 6)
+#define NAU8825_LONGKEY_INT_EN (0x0 << 6)
+#define NAU8825_LONGKEY_INT_DIS (0x1 << 6)
+#define NAU8825_SHORTKEY_INT_MASK (0x1 << 5)
+#define NAU8825_SHORTKEY_INT_EN (0x0 << 5)
+#define NAU8825_SHORTKEY_INT_DIS (0x1 << 5)
+#define NAU8825_EJECT_INT_MASK (0x1 << 2)
+#define NAU8825_EJECT_INT_EN (0x0 << 2)
+#define NAU8825_EJECT_INT_DIS (0x1 << 2)
+#define NAU8825_JACK_IN_INT_MASK (0x1 << 0)
+#define NAU8825_JACK_IN_INT_EN (0x0 << 0)
+#define NAU8825_JACK_IN_INT_DIS (0x1 << 0)
+
+/* reg. NAU8825_SAR_ADC (0x13) */
+#define NAU8825_SAR_EN_MASK (0x1 << 12)
+#define NAU8825_SAR_EN (0x1 << 12)
+#define NAU8825_SAR_DIS (0x0 << 12)
+#define NAU8825_JKSLV_MASK (0x1 << 11)
+#define NAU8825_JKSLV_EN (0x1 << 11)
+#define NAU8825_JKSLV_DIS (0x0 << 11)
+
+/* reg. NAU8825_I2S_PCM_CTRL_1 (0x1C) */
+#define NAU8825_I2S_TRI_STATE_MASK (0x1 << 15)
+#define NAU8825_I2S_TRI_STATE_EN (0x1 << 15)
+#define NAU8825_I2S_TRI_STATE_DIS (0x0 << 15)
+#define NAU8825_I2S_BP_MASK (0x1 << 7)
+#define NAU8825_I2S_BP_INV (0x1 << 7)
+#define NAU8825_I2S_PCMB_MASK (0x1 << 6)
+#define NAU8825_I2S_PCMB_EN (0x1 << 6)
+#define NAU8825_I2S_DL_MASK (0x3 << 2)
+#define NAU8825_I2S_DF_MASK 0x3
+#define NAU8825_I2S_DF_RIGHT 0x0
+#define NAU8825_I2S_DF_LEFT 0x1
+#define NAU8825_I2S_DF_I2S 0x2
+#define NAU8825_I2S_DF_PCM_A 0x3
+#define NAU8825_I2S_DF_PCM_B 0x3
+
+/* reg. NAU8825_I2S_PCM_CTRL_2 (0x1D) */
+#define NAU8825_I2S_MS_MASK (0x1 << 3)
+#define NAU8825_I2S_MS_MASTER (0x1 << 3)
+#define NAU8825_I2S_MS_SLAVE (0x0 << 3)
+
+/* reg. NAU8825_BIQ_CTRL (0x20) */
+#define NAU8825_BIQ_WRT_MASK (0x1 << 4)
+#define NAU8825_BIQ_WRT_EN (0x1 << 4)
+#define NAU8825_BIQ_WRT_DIS (0x0 << 4)
+
+/* reg. NAU8825_ADC_DGAIN_CTRL (0x30) */
+#define NAU8825_ADC_DGAIN_SFT 0
+
+/* reg. NAU8825_DAC_MUTE_CTRL (0x31) */
+#define NAU8825_SOFT_MUTE_MASK (0x1 << 9)
+#define NAU8825_SOFT_MUTE_EN (0x1 << 9)
+#define NAU8825_SOFT_MUTE_DIS (0x0 << 9)
+
+/* reg. NAU8825_HSVOL_CTRL (0x32) */
+#define NAU8825_R_MUTE (0x1 << 15)
+#define NAU8825_R_MUTE_SFT 15
+#define NAU8825_L_MUTE (0x1 << 14)
+#define NAU8825_L_MUTE_SFT 14
+#define NAU8825_L_HSVOL_SFT 6
+#define NAU8825_R_HSVOL_SFT 0
+
+/* reg. NAU8825_IMM_MODE_CTRL (0x4C) */
+#define NAU8825_IMM_MODE_EN_MASK (0x1 << 3)
+#define NAU8825_IMM_MODE_EN (0x1 << 3)
+#define NAU8825_IMM_MODE_DIS (0x0 << 3)
+
+/* reg. NAU8825_CLASSG_CTRL (0x50) */
+#define NAU8825_CLASSG_PATH_MASK (0x3 << 1)
+#define NAU8825_CLASSG_PATH_EN (0x3 << 1)
+#define NAU8825_CLASSG_PATH_DIS (0x3 << 0)
+#define NAU8825_CLASSG_LEFT_SHIFT 1
+#define NAU8825_CLASSG_EN_SHIFT 0
+#define NAU8825_CLASSG_EN_MASK (0x1 << 0)
+#define NAU8825_CLASSG_EN_SHIFT 0
+
+/*#define NAU8825_I2C_DEVICE_ID (0x58) */
+#define NAU8825_GPIO2JD1 (0x1 << 7)
+
+/* reg. NAU8825_BIAS_ADJ (0x66) */
+#define NAU8825_VMID_MASK (0x1 << 6)
+#define NAU8825_VMID_EN (0x1 << 6)
+#define NAU8825_VMID_DIS (0x0 << 6)
+#define NAU8825_VMIDSEL_MASK (0x3 << 4)
+#define NAU8825_VMIDSEL_125KOHM (0x2 << 4)
+
+/* reg. NAU8825_ANALOG_CTRL_2 (0x6A) */
+#define NAU8825_VMID_MASK (0x1 << 6)
+#define NAU8825_VMID_EN (0x1 << 6)
+#define NAU8825_VMID_DIS (0x0 << 6)
+
+/* reg. NAU8825_DAC_CTRL (0x73) */
+#define NAU8825_DAC_R_SFT 13
+#define NAU8825_DAC_L_SFT 12
+#define NAU8825_DAC_CLK_R_SFT 9
+#define NAU8825_DAC_CLK_L_SFT 8
+#define NAU8825_DAC_LR_MASK (0x3 << 12)
+#define NAU8825_DAC_LR_EN (0x3 << 12)
+#define NAU8825_DAC_LR_DIS (0x0 << 12)
+#define NAU8825_DAC_CLK_LR_MASK (0x3 << 8)
+#define NAU8825_DAC_CLK_LR_EN (0x3 << 8)
+#define NAU8825_DAC_CLK_LR_DIS (0x0 << 8)
+#define NAU8825_DAC_CLK_DELAY_MASK (0x7 << 4)
+#define NAU8825_DAC_REF_VOLT_MASK (0x3 << 2)
+
+/* reg. NAU8825_MIC_BIAS (0x74) */
+#define NAU8825_INT2KB_MSK (0x1 << 14)
+#define NAU8825_INT2KB_EN (0x1 << 14)
+#define NAU8825_INT2KB_DIS (0x0 << 14)
+#define NAU8825_INT2KA_MSK (0x1 << 12)
+#define NAU8825_INT2KA_EN (0x1 << 12)
+#define NAU8825_INT2KA_DIS (0x0 << 12)
+#define NAU8825_MIC_POWERUP_MSK (0x1 << 8)
+#define NAU8825_MIC_POWERUP_EN (0x1 << 8)
+#define NAU8825_MIC_POWERUP_DIS (0x0 << 8)
+#define NAU8825_MIC_BIAS_LVL_MSK (0x7 << 0)
+
+/* reg. NAU8825_BOOST (0x76) */
+#define NAU8825_G_BIAS_MASK (0x1 << 12)
+#define NAU8825_G_BIAS_SFT 12
+#define NAU8825_G_BIAS_EN (0x1 << 12)
+#define NAU8825_G_BIAS_DIS (0x0 << 12)
+#define NAU8825_BOOST_DRV_MASK (0x1 << 9)
+#define NAU8825_BOOST_DRV_EN (0x0 << 9)
+#define NAU8825_BOOST_DRV_DIS (0x1 << 9)
+
+/* reg. NAU8825_POWER_UP_CTRL (0x7F) */
+#define NAU8825_FEPGA_MASK (0x1 << 14)
+#define NAU8825_FEPGA_EN (0x1 << 14)
+#define NAU8825_FEPGA_DIS (0x0 << 14)
+#define NAU8825_FEPGA_GAIN_MASK (0x3F << 8)
+#define NAU8825_OUTPUT_DRIVER_MASK (0x3F << 0)
+#define NAU8825_OUTPUT_DRIVER_EN (0x3F << 0)
+#define NAU8825_OUTPUT_DRIVER_DIS (0x0 << 0)
+#define NAU8825_PUP_INTEG_MASK (0x3 << 4)
+#define NAU8825_PUP_INTEG_ENA (0x3 << 4)
+#define NAU8825_PUP_INTEG_DIS (0x0 << 4)
+#define NAU8825_PUP_OUT_MASK (0x3 << 2)
+#define NAU8825_PUP_OUT_ENA (0x3 << 2)
+#define NAU8825_PUP_OUT_DIS (0x0 << 2)
+#define NAU8825_PUP_MAIN_MASK (0x3 << 0)
+#define NAU8825_PUP_MAIN_ENA (0x3 << 0)
+#define NAU8825_PUP_MAIN_DIS (0x0 << 0)
+
+
+/* reg. NAU8825_CHARGE_BUMP_CTRL (0x80) */
+#define NAU8825_PD_DAC_MASK (0x3 << 8)
+#define NAU8825_PD_DAC_ENA (0x3 << 8)
+#define NAU8825_PD_DAC_DIS (0x0 << 8)
+#define NAU8825_CB_CLK_MASK (0x1 << 7)
+#define NAU8825_CB_CLK_EN (0x1 << 7)
+#define NAU8825_CB_CLK_DIS (0x0 << 7)
+#define NAU8825_CB_MASK (0x1 << 5)
+#define NAU8825_CB_EN (0x1 << 5)
+#define NAU8825_CB_DIS (0x0 << 5)
+
+/* reg. NAU8825_GENERAL_STATUS (0x82) */
+#define NAU8825_OUT12_MASK (0x3 << 10)
+#define NAU8825_OUT2EN_OUT1EN (0x3 << 10)
+#define NAU8825_OUT2EN_OUT1DIS (0x2 << 10)
+#define NAU8825_OUT2DIS_OUT1EN (0x1 << 10)
+#define NAU8825_OUT2DIS_OUT1DIS (0x0 << 10)
+
+/* Volume Rescale */
+#define NAU8825_VOL_RSCL_RANGE 0x36
+#define NAU8825_ADC_VOL_RSCL_RANGE 0xFF
+
+/* Data format */
+#define NAU8825_I2S_DL_16 (0x0 << 2)
+#define NAU8825_I2S_DL_20 (0x1 << 2)
+#define NAU8825_I2S_DL_24 (0x2 << 2)
+#define NAU8825_I2S_DL_32 (0x3 << 2)
+
+enum {
+ NAU8825_INTERNALCLOCK = 0,
+ NAU8825_MCLK,
+};
+
+struct nau8825_priv {
+ struct regmap *regmap;
+ struct i2c_client *i2c;
+};
+#endif /* _NAU8825_H */
+
--
1.9.3
On Mon, 2015-07-13 at 15:33 +0800, Chih-Chiang Chang wrote:
> +static void set_sys_clk(struct snd_soc_codec *codec, int sys_clk)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + pr_debug("%s :: sys_clk=%x\n", __func__, sys_clk);
> + switch (sys_clk) {
> + case NAU8825_INTERNALCLOCK:
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
> + NAU8825_DCO_EN_MASK, NAU8825_DCO_EN);
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_EN);
> + break;
> + case NAU8825_MCLK:
> + default:
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
> + NAU8825_DCO_EN_MASK, NAU8825_DCO_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_2,
> + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
> + /* FLL clock source from MCLK */
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_DIS);
> + mdelay(2);
Probably best to sleep here rather than block, especially if this code
will be used in init/PM sequences.
Btw, is there anyway to check whether the FLL actually achieves lock
after the 2ms ?
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_EN);
> + break;
> + }
> +}
> +
Thanks
Liam
On Mon, Jul 13, 2015 at 03:33:06PM +0800, Chih-Chiang Chang wrote:
> +static const struct snd_kcontrol_new nau8825_snd_controls[] = {
> + SOC_SINGLE_TLV("MIC Volume", NAU8825_ADC_DGAIN_CTRL,
> + NAU8825_ADC_DGAIN_SFT,
> + NAU8825_ADC_VOL_RSCL_RANGE, 0, adc_vol_tlv),
> + SOC_DOUBLE_TLV("HP Volume", NAU8825_HSVOL_CTRL,
> + NAU8825_L_HSVOL_SFT, NAU8825_R_HSVOL_SFT,
> + NAU8825_VOL_RSCL_RANGE, 1, out_hp_vol_tlv),
HP would normally be Headphone, MIC Microphone or Mic.
> +static const struct snd_kcontrol_new nau8825_hpo_mix[] = {
> + SOC_DAPM_SINGLE("HP L Switch", NAU8825_HSVOL_CTRL,
> + NAU8825_L_MUTE_SFT, 1, 1),
> + SOC_DAPM_SINGLE("HP R Switch", NAU8825_HSVOL_CTRL,
> + NAU8825_R_MUTE_SFT, 1, 1),
Left and Right please.
> +static int nau8825_dac_mute(struct snd_soc_dai *codec_dai, int mute)
> +{
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + if (mute)
> + regmap_update_bits(nau8825->regmap, NAU8825_DAC_MUTE_CTRL,
> + NAU8825_SOFT_MUTE_MASK, NAU8825_SOFT_MUTE_EN);
> + else
> + regmap_update_bits(nau8825->regmap, NAU8825_DAC_MUTE_CTRL,
> + NAU8825_SOFT_MUTE_MASK, NAU8825_SOFT_MUTE_DIS);
Please use the kernel coding style. It also looks like you're using
spaces not tabs... indeed now I check with checkpatch it seems you
didn't.
> + /* interface format */
> + switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> + case SND_SOC_DAIFMT_NB_NF:
> + break;
> + case SND_SOC_DAIFMT_IB_NF:
> + reg_val |= NAU8825_I2S_BP_INV;
> + break;
> + default:
> + dev_alert(codec->dev, "Invalid DAI interface format\n");
Why are you using dev_alert?
> +static void set_sys_clk(struct snd_soc_codec *codec, int sys_clk)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + pr_debug("%s :: sys_clk=%x\n", __func__, sys_clk);
dev_dbg()
> + case NAU8825_MCLK:
> + default:
Why is there a default case here that's not just returning an error?
> + switch (level) {
> + case SND_SOC_BIAS_ON:
> + /* All power is driven by DAPM system*/
> + dev_dbg(codec->dev, "###nau8825_set_bias_level BIAS_ON\n");
> + regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
> + NAU8825_VMIDSEL_MASK, NAU8825_VMIDSEL_125KOHM);
> + regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
> + NAU8825_VMID_MASK, NAU8825_VMID_EN);
> + regmap_update_bits(nau8825->regmap, NAU8825_BOOST,
> + NAU8825_G_BIAS_MASK, NAU8825_G_BIAS_EN);
> + break;
You appear to be enabling VMID and other supplies only when you get to
_BIAS_ON after everything else has been enabled. In CODECs where this
is a good idea usually some delay is needed to wait for VMID to ramp
before anything tries to actually play audio otherwise you get audio
playing on a partially ramped VMID and clipping or worse. If VMID can
be ramped quickly it is more normal to ramp it in _STANDBY.
Can you explain what's going on here?
> +static int nau8825_codec_probe(struct snd_soc_codec *codec)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + /* bias current settings */
> + regmap_write(nau8825->regmap, 0x0072, 0x0260);
> + /* enable bias */
> + nau8825_set_bias_level(codec, SND_SOC_BIAS_ON);
> + mdelay(10);
It looks like you need a ramp... also this appears to leave things
powered on which is not good, the device should default to idle.
> + /* DAC digital default gain 0 dB */
> + regmap_write(nau8825->regmap, 0x0033, 0x00cf);
> + regmap_write(nau8825->regmap, 0x0034, 0x02cf);
> + /* DAC driver default gain -29 dB */
> + regmap_write(nau8825->regmap, 0x0032, 0x075d);
> + /* ADC digital default gain 8 dB */
> + regmap_write(nau8825->regmap, 0x0030, 0x00d2);
No, use the hardware defaults.
> + /* enable ADC/DAC clocks */
> + regmap_write(nau8825->regmap, 0x0001, 0x07fd);
Why is this not managed via DAPM?
> +static int ena_adc(struct nau8825_priv *nau8825)
> +{
> + /* adc & clock settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_ADC_CLK_MASK, NAU8825_ADC_CLK_EN);
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_ADC_MASK, NAU8825_ADC_EN);
> + /* adc PGA settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + NAU8825_FEPGA_GAIN_MASK, 0x1b00);
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + NAU8825_FEPGA_MASK, NAU8825_FEPGA_EN);
> + /* mic bias output level (1.1V) */
> + regmap_update_bits(nau8825->regmap, NAU8825_MIC_BIAS,
> + NAU8825_MIC_BIAS_LVL_MSK, 0x04);
> + /* enable mic bias */
> + regmap_update_bits(nau8825->regmap, NAU8825_MIC_BIAS,
> + NAU8825_MIC_POWERUP_MSK, NAU8825_MIC_POWERUP_EN);
> + mdelay(10);
> + return 0;
> +}
This looks like the sort of sequence DAPM can generate - why are DAPM
widgets not being used?
> +static int dis_dac(struct nau8825_priv *nau8825)
> +{
> + /* disable charge bump */
These are more usually called a charge pump.
> +static int nau8825_trigger(struct snd_pcm_substream *substream,
> + int cmd, struct snd_soc_dai *dai)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + config_fll_clk_12m(codec);
> + set_sys_clk(codec, NAU8825_MCLK);
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> + ena_dac(nau8825);
> + else
> + ena_adc(nau8825);
> + break;
No, this is all compeltely non-idiomatic and I'm surprised it even runs
successfully for you. This is doing I2C I/O in the trigger function
which is called from atomic context, at the very least I would expect
this to be causing lots of warnings. You should be using DAPM to manage
the power up and down sequences (as some comments earlier in the driver
claimed it was doing). There are quite a few serious problems here
which mostly seem to come down to trying to have power sequences outside
of DAPM, there is some DAPM code but it's obviously at best not very
complete. Look at how other drivers handle power management.
I've not reviwed any of the rest of this driver.
Hi Chih-Chiang
On Mon, Jul 13, 2015 at 12:33 AM, Chih-Chiang Chang
<[email protected]> wrote:
> The NAU88L25 is an ultra-low power high performance audio codec designed
> for smartphone, tablet PC, and other portable devices by Nuvoton, now
> add linux driver support for it.
At ChromeOS we work with Nuvoton hw engineers on driver for this nice
chip as well.
Here is current driver code
https://github.com/anatol/linux/blob/nau8825/sound/soc/codecs/nau8825.c
The functionality is mostly ready. Our driver handles playback,
capture, mic jack detection, an button presses (4 buttons according
Android specification). We need to resolve a few remaining issues,
such as
- chip needs better way to recognize high-impedance input (e.g. Bose
Quiet Comfort 15 headset)
- implement headset cross talk automatic configuration
- general code cleanup
But otherwise driver is functional and used for testing in our next
generation device.
What do you think about joining efforts on this software development
to make great driver for this chip?
> Signed-off-by: Chih-Chiang Chang <[email protected]>
> ---
> v3->v2:
> - fix the wrong definition of reg_default
> - fix the flow of set_sys_clk() and nau8825_set_bias_level()
> - remove unnecessary code in nau8825_volatile_register() and
> nau8825_i2c_probe()
> - add trigger function for ADC/DAC control
> - add some register definitions
> - fix some coding style issues
> v2->v1:
> - fixes according to Lars-Peter Clausen's review comments
> - removes unused platform data file
> - corrects the naming of DAPM input widget
> - fixes some wrong coding of SOC widgets and other codes
> - adds definition and remark for config FLL clock
> - moves the code of reset hardware registers from codec_probe() to
> i2c_probe()
> - removes unused codes
>
> sound/soc/codecs/Kconfig | 5 +
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/nau8825.c | 724
> +++++++++++++++++++++++++++++++++++++++++++++
> sound/soc/codecs/nau8825.h | 399 +++++++++++++++++++++++++
> 4 files changed, 1130 insertions(+)
> create mode 100644 sound/soc/codecs/nau8825.c
> create mode 100644 sound/soc/codecs/nau8825.h
>
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index efaafce..1edb781 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -76,6 +76,7 @@ config SND_SOC_ALL_CODECS
> select SND_SOC_MAX9877 if I2C
> select SND_SOC_MC13783 if MFD_MC13XXX
> select SND_SOC_ML26124 if I2C
> + select SND_SOC_NAU8825 if I2C
> select SND_SOC_HDMI_CODEC
> select SND_SOC_PCM1681 if I2C
> select SND_SOC_PCM1792A if SPI_MASTER
> @@ -470,6 +471,10 @@ config SND_SOC_MAX98925
> config SND_SOC_MAX9850
> tristate
>
> +config SND_SOC_NAU8825
> + tristate "Nuvoton NAU8825 CODEC"
> + depends on I2C
> +
> config SND_SOC_PCM1681
> tristate "Texas Instruments PCM1681 CODEC"
> depends on I2C
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index cf160d9..db0a4ec 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -69,6 +69,7 @@ snd-soc-max98925-objs := max98925.o
> snd-soc-max9850-objs := max9850.o
> snd-soc-mc13783-objs := mc13783.o
> snd-soc-ml26124-objs := ml26124.o
> +snd-soc-nau8825-objs := nau8825.o
> snd-soc-hdmi-codec-objs := hdmi.o
> snd-soc-pcm1681-objs := pcm1681.o
> snd-soc-pcm1792a-codec-objs := pcm1792a.o
> @@ -256,6 +257,7 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
> obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
> obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
> obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
> +obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o
> obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
> obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
> obj-$(CONFIG_SND_SOC_PCM1792A) += snd-soc-pcm1792a-codec.o
> diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
> new file mode 100644
> index 0000000..d3b306a
> --- /dev/null
> +++ b/sound/soc/codecs/nau8825.c
> @@ -0,0 +1,724 @@
> +/*
> + * nau8825.c
> + *
> + * Copyright 2015 Nuvoton Technology Corp.
> + * Author: Meng-Huang Kuo <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/pm.h>
> +#include <linux/i2c.h>
> +#include <linux/gpio.h>
> +#include <linux/device.h>
> +#include <linux/clk.h>
> +#include <linux/regmap.h>
> +#include <linux/acpi.h>
> +#include <asm/div64.h>
> +#include <sound/jack.h>
> +#include <sound/core.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/initval.h>
> +#include <sound/tlv.h>
> +#include <linux/delay.h>
> +#include "nau8825.h"
> +
> +static const DECLARE_TLV_DB_SCALE(out_hp_vol_tlv, -5400, 100, 0);
> +static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -10350, 50, 0);
> +
> +static const struct snd_kcontrol_new nau8825_snd_controls[] = {
> + SOC_SINGLE_TLV("MIC Volume", NAU8825_ADC_DGAIN_CTRL,
> + NAU8825_ADC_DGAIN_SFT,
> + NAU8825_ADC_VOL_RSCL_RANGE, 0, adc_vol_tlv),
> + SOC_DOUBLE_TLV("HP Volume", NAU8825_HSVOL_CTRL,
> + NAU8825_L_HSVOL_SFT, NAU8825_R_HSVOL_SFT,
> + NAU8825_VOL_RSCL_RANGE, 1, out_hp_vol_tlv),
> +};
> +
> +static const struct snd_kcontrol_new nau8825_hpo_mix[] = {
> + SOC_DAPM_SINGLE("HP L Switch", NAU8825_HSVOL_CTRL,
> + NAU8825_L_MUTE_SFT, 1, 1),
> + SOC_DAPM_SINGLE("HP R Switch", NAU8825_HSVOL_CTRL,
> + NAU8825_R_MUTE_SFT, 1, 1),
> +};
> +
> +static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
> + /* Input */
> + SND_SOC_DAPM_INPUT("MIC"),
> + SND_SOC_DAPM_SUPPLY("MIC BIAS", NAU8825_BOOST, NAU8825_G_BIAS_SFT, 0,
> + NULL, 0),
> + /* Audio Interface */
> + SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
> + SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
> + /* DACs */
> + SND_SOC_DAPM_DAC("DAC L1", NULL, NAU8825_DAC_CTRL,
> + NAU8825_DAC_L_SFT, 0),
> + SND_SOC_DAPM_DAC("DAC R1", NULL, NAU8825_DAC_CTRL,
> + NAU8825_DAC_R_SFT, 0),
> + /* SPO/HPO/LOUT/Mono Mixer */
> + SND_SOC_DAPM_MIXER("HPO MIX", SND_SOC_NOPM, 0, 0, nau8825_hpo_mix,
> + ARRAY_SIZE(nau8825_hpo_mix)),
> + SND_SOC_DAPM_SUPPLY("HP amp", NAU8825_CLASSG_CTRL,
> + NAU8825_CLASSG_EN_SHIFT, 0, NULL, 0),
> + /* Output */
> + SND_SOC_DAPM_OUTPUT("HPOL"),
> + SND_SOC_DAPM_OUTPUT("HPOR"),
> +};
> +
> +static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
> + {"AIF1TX", NULL, "MIC"},
> + {"DAC L1", NULL, "AIF1RX"},
> + {"DAC R1", NULL, "AIF1RX"},
> + {"HPO MIX", "HP L Switch", "DAC L1"},
> + {"HPO MIX", "HP R Switch", "DAC R1"},
> + {"HPOL", NULL, "HPO MIX"},
> + {"HPOR", NULL, "HPO MIX"},
> + {"HPOL", NULL, "HP amp"},
> + {"HPOR", NULL, "HP amp"},
> +};
> +
> +static int nau8825_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> + unsigned int val_len = 0;
> +
> + switch (params_width(params)) {
> + case 16:
> + break;
> + case 20:
> + val_len |= NAU8825_I2S_DL_20;
> + break;
> + case 24:
> + val_len |= NAU8825_I2S_DL_24;
> + break;
> + case 32:
> + val_len |= NAU8825_I2S_DL_32;
> + break;
> + default:
> + return -EINVAL;
> + }
> + regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_1,
> + NAU8825_I2S_DL_MASK, val_len);
> + return 0;
> +}
> +
> +static int nau8825_dac_mute(struct snd_soc_dai *codec_dai, int mute)
> +{
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + if (mute)
> + regmap_update_bits(nau8825->regmap, NAU8825_DAC_MUTE_CTRL,
> + NAU8825_SOFT_MUTE_MASK, NAU8825_SOFT_MUTE_EN);
> + else
> + regmap_update_bits(nau8825->regmap, NAU8825_DAC_MUTE_CTRL,
> + NAU8825_SOFT_MUTE_MASK, NAU8825_SOFT_MUTE_DIS);
> + return 0;
> +}
> +
> +static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int
> fmt)
> +{
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> + unsigned int reg_val = 0;
> +
> + dev_dbg(codec->dev, " %s ###nau8825_set_dai_fmt %x\n", __func__, fmt);
> + /* interface format */
> + switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> + case SND_SOC_DAIFMT_NB_NF:
> + break;
> + case SND_SOC_DAIFMT_IB_NF:
> + reg_val |= NAU8825_I2S_BP_INV;
> + break;
> + default:
> + dev_alert(codec->dev, "Invalid DAI interface format\n");
> + return -EINVAL;
> + }
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S:
> + reg_val |= NAU8825_I2S_DF_I2S;
> + break;
> + case SND_SOC_DAIFMT_LEFT_J:
> + reg_val |= NAU8825_I2S_DF_LEFT;
> + break;
> + case SND_SOC_DAIFMT_RIGHT_J:
> + reg_val |= NAU8825_I2S_DF_RIGHT;
> + break;
> + case SND_SOC_DAIFMT_DSP_A:
> + reg_val |= NAU8825_I2S_DF_PCM_A;
> + break;
> + case SND_SOC_DAIFMT_DSP_B:
> + reg_val |= NAU8825_I2S_DF_PCM_B;
> + reg_val |= NAU8825_I2S_PCMB_EN;
> + break;
> + default:
> + dev_alert(codec->dev, "Invalid DAI I2S/PCM format\n");
> + return -EINVAL;
> + }
> + regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_1,
> + NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK
> + | NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK,
> + reg_val);
> + return 0;
> +}
> +
> +static void config_fll_clk_12m(struct snd_soc_codec *codec)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_CLK_MCLK_SRC_MASK, 0x0003);
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_1,
> + NAU8825_FLL_RATIO_MASK, 0x0001);
> + /* FLL 16-bit fractional input */
> + regmap_write(nau8825->regmap, NAU8825_FLL_2, 0xc49b);
> + /* FLL 10-bit integer input */
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_3,
> + NAU8825_FLL_INTEGER_MASK, 0x0020);
> + /* FLL pre-scaler */
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_4,
> + NAU8825_FLL_REF_DIV_MASK, 0x0800);
> + /* select divied VCO input */
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_5,
> + NAU8825_FLL_FILTER_SW_MASK, 0x0000);
> + /* FLL sigma delta modulator enable */
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
> + NAU8825_SDM_EN_MASK, 0x4000);
> +}
> +
> +static void set_sys_clk(struct snd_soc_codec *codec, int sys_clk)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + pr_debug("%s :: sys_clk=%x\n", __func__, sys_clk);
> + switch (sys_clk) {
> + case NAU8825_INTERNALCLOCK:
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
> + NAU8825_DCO_EN_MASK, NAU8825_DCO_EN);
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_EN);
> + break;
> + case NAU8825_MCLK:
> + default:
> + regmap_update_bits(nau8825->regmap, NAU8825_FLL_6,
> + NAU8825_DCO_EN_MASK, NAU8825_DCO_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_I2S_PCM_CTRL_2,
> + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
> + /* FLL clock source from MCLK */
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_DIS);
> + mdelay(2);
> + regmap_update_bits(nau8825->regmap, NAU8825_CLK_DIVIDER,
> + NAU8825_SYSCLK_EN_MASK, NAU8825_SYSCLK_EN);
> + break;
> + }
> +}
> +
> +static int nau8825_dai_set_sysclk(struct snd_soc_dai *dai,
> + int clk_id, unsigned int freq, int dir)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> +
> + switch (clk_id) {
> + case NAU8825_MCLK:
> + config_fll_clk_12m(codec);
> + set_sys_clk(codec, clk_id);
> + break;
> + case NAU8825_INTERNALCLOCK:
> + set_sys_clk(codec, clk_id);
> + break;
> + default:
> + dev_err(codec->dev, "Wrong clock src\n");
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int nau8825_set_bias_level(struct snd_soc_codec *codec,
> + enum snd_soc_bias_level level)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + switch (level) {
> + case SND_SOC_BIAS_ON:
> + /* All power is driven by DAPM system*/
> + dev_dbg(codec->dev, "###nau8825_set_bias_level BIAS_ON\n");
> + regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
> + NAU8825_VMIDSEL_MASK, NAU8825_VMIDSEL_125KOHM);
> + regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
> + NAU8825_VMID_MASK, NAU8825_VMID_EN);
> + regmap_update_bits(nau8825->regmap, NAU8825_BOOST,
> + NAU8825_G_BIAS_MASK, NAU8825_G_BIAS_EN);
> + break;
> + case SND_SOC_BIAS_OFF:
> + dev_dbg(codec->dev, "###nau8825_set_bias_level OFF\n");
> + set_sys_clk(codec, NAU8825_INTERNALCLOCK);
> + regmap_update_bits(nau8825->regmap, NAU8825_BIAS_ADJ,
> + NAU8825_VMID_MASK, NAU8825_VMID_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_BOOST,
> + NAU8825_G_BIAS_MASK, NAU8825_G_BIAS_DIS);
> + break;
> + default:
> + break;
> + }
> + codec->dapm.bias_level = level;
> + dev_dbg(codec->dev, "## nau8825_set_bias_level %d\n", level);
> + return 0;
> +}
> +
> +
> +static const struct reg_default nau8825_reg[] = {
> + {0x000, 0x0000},
> + {0x001, 0x00ff},
> + {0x003, 0x0050},
> + {0x004, 0x0000},
> + {0x005, 0x3126},
> + {0x006, 0x0008},
> + {0x007, 0x0010},
> + {0x008, 0x0000},
> + {0x009, 0x6000},
> + {0x00a, 0xf13c},
> + {0x00c, 0x000c},
> + {0x00d, 0x0000},
> + {0x00f, 0x0800},
> + {0x010, 0x0000},
> + {0x011, 0x0000},
> + {0x012, 0x0010},
> + {0x013, 0x0015},
> + {0x014, 0x0110},
> + {0x015, 0x0000},
> + {0x016, 0x0000},
> + {0x017, 0x0000},
> + {0x018, 0x0000},
> + {0x019, 0x0000},
> + {0x01a, 0x0000},
> + {0x01b, 0x0000},
> + {0x01c, 0x000b},
> + {0x01d, 0x8010},
> + {0x01e, 0x0000},
> + {0x01f, 0x0000},
> + {0x020, 0x0000},
> + {0x021, 0x0000},
> + {0x022, 0x0000},
> + {0x023, 0x0000},
> + {0x024, 0x0000},
> + {0x025, 0x0000},
> + {0x026, 0x0000},
> + {0x027, 0x0000},
> + {0x028, 0x0000},
> + {0x029, 0x0000},
> + {0x02a, 0x0000},
> + {0x02b, 0x0010},
> + {0x02c, 0x0001},
> + {0x02d, 0x0000},
> + {0x02f, 0x0000},
> + {0x030, 0x01cf},
> + {0x031, 0x0000},
> + {0x032, 0x0000},
> + {0x033, 0x00cf},
> + {0x034, 0x0000},
> + {0x038, 0x1486},
> + {0x039, 0x0f12},
> + {0x03a, 0x25ff},
> + {0x03b, 0x3457},
> + {0x045, 0x1486},
> + {0x046, 0x0f12},
> + {0x047, 0x25f9},
> + {0x048, 0x3457},
> + {0x04c, 0x0000},
> + {0x04d, 0x0000},
> + {0x050, 0x0000},
> + {0x051, 0x0000},
> + {0x055, 0x0000},
> + {0x058, 0x0000},
> + {0x059, 0x0000},
> + {0x066, 0x0000},
> + {0x068, 0x0000},
> + {0x069, 0x0000},
> + {0x06a, 0x0020},
> + {0x071, 0x0011},
> + {0x072, 0x0020},
> + {0x073, 0x0008},
> + {0x074, 0x0006},
> + {0x076, 0x0000},
> + {0x077, 0x0000},
> + {0x07f, 0x0000},
> + {0x080, 0x0300},
> + {0x081, 0x0000},
> + {0x082, 0x0000},
> +};
> +
> +static int nau8825_codec_remove(struct snd_soc_codec *codec)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
> + regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
> + return 0;
> +}
> +
> +static int nau8825_codec_probe(struct snd_soc_codec *codec)
> +{
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + /* bias current settings */
> + regmap_write(nau8825->regmap, 0x0072, 0x0260);
> + /* enable bias */
> + nau8825_set_bias_level(codec, SND_SOC_BIAS_ON);
> + mdelay(10);
> + /* DAC digital default gain 0 dB */
> + regmap_write(nau8825->regmap, 0x0033, 0x00cf);
> + regmap_write(nau8825->regmap, 0x0034, 0x02cf);
> + /* DAC driver default gain -29 dB */
> + regmap_write(nau8825->regmap, 0x0032, 0x075d);
> + /* ADC digital default gain 8 dB */
> + regmap_write(nau8825->regmap, 0x0030, 0x00d2);
> + /* ehance I2C SDA driver strength */
> + regmap_write(nau8825->regmap, 0x0080, 0x0800);
> + /* enable ADC/DAC clocks */
> + regmap_write(nau8825->regmap, 0x0001, 0x07fd);
> + /* headphone output */
> + regmap_write(nau8825->regmap, 0x00C, 0x000c);
> + return 0;
> +}
> +
> +static const struct snd_soc_codec_driver soc_codec_driver_nau8825 = {
> + .probe = nau8825_codec_probe,
> + .remove = nau8825_codec_remove,
> + .suspend_bias_off = true,
> + .set_bias_level = nau8825_set_bias_level,
> + .controls = nau8825_snd_controls,
> + .num_controls = ARRAY_SIZE(nau8825_snd_controls),
> + .dapm_widgets = nau8825_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets),
> + .dapm_routes = nau8825_dapm_routes,
> + .num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes),
> +};
> +
> +static bool nau8825_readable_register(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case NAU8825_RESET:
> + case NAU8825_ENA_CTRL:
> + case NAU8825_CLK_EN:
> + case NAU8825_CLK_DIVIDER:
> + case NAU8825_FLL_1:
> + case NAU8825_FLL_2:
> + case NAU8825_FLL_3:
> + case NAU8825_FLL_4:
> + case NAU8825_FLL_5:
> + case NAU8825_FLL_6:
> + case NAU8825_HEADSET_CTRL:
> + case NAU8825_JACK_DET_CTRL:
> + case NAU8825_IRQ_MASK:
> + case NAU8825_IRQ_STATUS:
> + case NAU8825_IRQ_CLEAR:
> + case NAU8825_IRQ_CTRL:
> + case NAU8825_SAR_ADC:
> + case NAU8825_VDET_COEFFICIENT:
> + case NAU8825_VDET_THRESHOLD_1:
> + case NAU8825_VDET_THRESHOLD_2:
> + case NAU8825_GPIO12_CTRL:
> + case NAU8825_GPIO34_CTRL:
> + case NAU8825_I2S_PCM_CTRL_1:
> + case NAU8825_I2S_PCM_CTRL_2:
> + case NAU8825_ADC_RATE:
> + case NAU8825_DAC_CTRL1:
> + case NAU8825_DAC_CTRL2:
> + case NAU8825_IMM_MODE_CTRL:
> + case NAU8825_IMM_RMS_VALUE:
> + case NAU8825_ADC_DGAIN_CTRL:
> + case NAU8825_DAC_MUTE_CTRL:
> + case NAU8825_HSVOL_CTRL:
> + case NAU8825_DACL_CTRL:
> + case NAU8825_DACR_CTRL:
> + case NAU8825_SAR_ADC_OUTPUT:
> + case NAU8825_ANALOG_CTRL_2:
> + case NAU8825_ANALOG_ADC_1:
> + case NAU8825_ANALOG_ADC_2:
> + case NAU8825_DAC_CTRL:
> + case NAU8825_MIC_BIAS:
> + case NAU8825_BOOST:
> + case NAU8825_CLASSG_CTRL:
> + case NAU8825_I2C_DEVICE_ID:
> + case NAU8825_BIAS_ADJ:
> + case NAU8825_POWER_UP_CTRL:
> + case NAU8825_CHARGE_BUMP_CTRL:
> + case NAU8825_CHARGE_BUMP_RD:
> + case NAU8825_GENERAL_STATUS:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool nau8825_volatile_register(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case NAU8825_RESET:
> + case NAU8825_CLK_DIVIDER:
> + case NAU8825_FLL_1:
> + case NAU8825_FLL_2:
> + case NAU8825_FLL_3:
> + case NAU8825_FLL_4:
> + case NAU8825_FLL_5:
> + case NAU8825_FLL_6:
> + case NAU8825_ANALOG_CTRL_2:
> + case NAU8825_ANALOG_ADC_1:
> + case NAU8825_ANALOG_ADC_2:
> + case NAU8825_DAC_CTRL:
> + case NAU8825_MIC_BIAS:
> + case NAU8825_BOOST:
> + case NAU8825_CLASSG_CTRL:
> + case NAU8825_I2C_DEVICE_ID:
> + case NAU8825_BIAS_ADJ:
> + case NAU8825_POWER_UP_CTRL:
> + case NAU8825_CHARGE_BUMP_CTRL:
> + case NAU8825_GENERAL_STATUS:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static const struct regmap_config nau8825_regmap = {
> + .reg_bits = 16,
> + .val_bits = 16,
> + .use_single_rw = true,
> + .max_register = NAU8825_MAX_REGISTER,
> + .volatile_reg = nau8825_volatile_register,
> + .readable_reg = nau8825_readable_register,
> + .cache_type = REGCACHE_RBTREE,
> + .reg_defaults = nau8825_reg,
> + .num_reg_defaults = ARRAY_SIZE(nau8825_reg),
> +};
> +
> +static int ena_adc(struct nau8825_priv *nau8825)
> +{
> + /* adc & clock settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_ADC_CLK_MASK, NAU8825_ADC_CLK_EN);
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_ADC_MASK, NAU8825_ADC_EN);
> + /* adc PGA settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + NAU8825_FEPGA_GAIN_MASK, 0x1b00);
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + NAU8825_FEPGA_MASK, NAU8825_FEPGA_EN);
> + /* mic bias output level (1.1V) */
> + regmap_update_bits(nau8825->regmap, NAU8825_MIC_BIAS,
> + NAU8825_MIC_BIAS_LVL_MSK, 0x04);
> + /* enable mic bias */
> + regmap_update_bits(nau8825->regmap, NAU8825_MIC_BIAS,
> + NAU8825_MIC_POWERUP_MSK, NAU8825_MIC_POWERUP_EN);
> + mdelay(10);
> + return 0;
> +}
> +
> +static int dis_adc(struct nau8825_priv *nau8825)
> +{
> + /* disable PGA */
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + NAU8825_FEPGA_MASK, NAU8825_FEPGA_DIS);
> + /* adc & clock settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_ADC_MASK, NAU8825_ADC_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_ADC_CLK_MASK, NAU8825_ADC_CLK_DIS);
> + return 0;
> +}
> +
> +static int ena_dac(struct nau8825_priv *nau8825)
> +{
> + /* charge bump settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_CHARGE_BUMP_CTRL,
> + 0x07ff, 0x720);
> + /* enable DAC clock */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_DAC_CLK_MASK, NAU8825_DAC_CLK_EN);
> + /* enable DAC channel */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_DAC_MASK, NAU8825_DAC_EN);
> + /* classG parameter settings */
> + regmap_update_bits(nau8825->regmap, NAU8825_CLASSG_CTRL,
> + ~NAU8825_CLASSG_EN_MASK, 0x2007);
> + /* enable DAC */
> + regmap_write(nau8825->regmap, NAU8825_DAC_CTRL, 0x332c);
> + /* output driver settings */
> + regmap_write(nau8825->regmap, NAU8825_POWER_UP_CTRL, 0x073c);
> + /* power up main driver */
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + NAU8825_PUP_MAIN_MASK, NAU8825_PUP_MAIN_ENA);
> + mdelay(200);
> + /* enable charge bump */
> + regmap_update_bits(nau8825->regmap, NAU8825_CHARGE_BUMP_CTRL,
> + NAU8825_PD_DAC_MASK, NAU8825_PD_DAC_DIS);
> + return 0;
> +}
> +
> +static int dis_dac(struct nau8825_priv *nau8825)
> +{
> + /* disable charge bump */
> + regmap_update_bits(nau8825->regmap, NAU8825_CHARGE_BUMP_CTRL,
> + NAU8825_PD_DAC_MASK, NAU8825_PD_DAC_ENA);
> + /* disable classG */
> + regmap_update_bits(nau8825->regmap, NAU8825_CLASSG_CTRL,
> + NAU8825_CLASSG_PATH_MASK, NAU8825_CLASSG_PATH_DIS);
> + /* disable DAC */
> + regmap_update_bits(nau8825->regmap, NAU8825_DAC_CTRL,
> + NAU8825_DAC_LR_MASK, NAU8825_DAC_LR_DIS);
> + regmap_update_bits(nau8825->regmap, NAU8825_DAC_CTRL,
> + NAU8825_DAC_CLK_LR_MASK, NAU8825_DAC_CLK_LR_DIS);
> + /* disable output driver */
> + regmap_update_bits(nau8825->regmap, NAU8825_POWER_UP_CTRL,
> + 0x3f, 0x00);
> + /* disable DAC channel */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_L_DAC_MASK, NAU8825_L_DAC_DIS);
> + /* disable DAC clock */
> + regmap_update_bits(nau8825->regmap, NAU8825_ENA_CTRL,
> + NAU8825_DAC_CLK_MASK, NAU8825_DAC_CLK_DIS);
> + return 0;
> +}
> +
> +static int nau8825_trigger(struct snd_pcm_substream *substream,
> + int cmd, struct snd_soc_dai *dai)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct nau8825_priv *nau8825 = snd_soc_codec_get_drvdata(codec);
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + config_fll_clk_12m(codec);
> + set_sys_clk(codec, NAU8825_MCLK);
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> + ena_dac(nau8825);
> + else
> + ena_adc(nau8825);
> + break;
> + case SNDRV_PCM_TRIGGER_RESUME:
> + break;
> + case SNDRV_PCM_TRIGGER_STOP:
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> + dis_dac(nau8825);
> + else
> + dis_adc(nau8825);
> + break;
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> +#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000
> +#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |
> SNDRV_PCM_FMTBIT_S20_3LE \
> + | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
> +
> +static const struct snd_soc_dai_ops nau8825_dai_ops = {
> + .trigger = nau8825_trigger,
> + .hw_params = nau8825_hw_params,
> + .set_sysclk = nau8825_dai_set_sysclk,
> + .set_fmt = nau8825_set_dai_fmt,
> + .digital_mute = nau8825_dac_mute,
> +};
> +
> +static struct snd_soc_dai_driver nau8825_dai_driver[] = {
> + {
> + .name = "nau8825-aif1",
> + .playback = {
> + .stream_name = "AIF1 Playback",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = NAU8825_RATES,
> + .formats = NAU8825_FORMATS,
> + },
> + .capture = {
> + .stream_name = "AIF1 Capture",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = NAU8825_RATES,
> + .formats = NAU8825_FORMATS,
> + },
> + .ops = &nau8825_dai_ops,
> + }
> +};
> +
> +
> +static int nau8825_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *i2c_id)
> +{
> + struct nau8825_priv *nau8825;
> + int ret;
> +
> + nau8825 = devm_kzalloc(&i2c->dev, sizeof(*nau8825),
> + GFP_KERNEL);
> + if (nau8825 == NULL)
> + return -ENOMEM;
> + nau8825->i2c = i2c;
> + i2c_set_clientdata(i2c, nau8825);
> + nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap);
> + if (IS_ERR(nau8825->regmap)) {
> + ret = PTR_ERR(nau8825->regmap);
> + dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
> + return ret;
> + }
> + /* software reset */
> + regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
> + regmap_write(nau8825->regmap, NAU8825_RESET, 0x00);
> +
> + /* register sound card */
> + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_driver_nau8825,
> + nau8825_dai_driver,
> + ARRAY_SIZE(nau8825_dai_driver));
> + return ret;
> +}
> +
> +static int nau8825_i2c_remove(struct i2c_client *i2c)
> +{
> + snd_soc_unregister_codec(&i2c->dev);
> + return 0;
> +}
> +
> +static const struct i2c_device_id nau8825_i2c_id[] = {
> + {"nau8825", 0},
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, nau8825_i2c_id);
> +
> +static const struct acpi_device_id nau8825_acpi_match[] = {
> + { "10508825", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match);
> +
> +static struct i2c_driver nau8825_i2c_driver = {
> + .driver = {
> + .name = "nau8825",
> + .owner = THIS_MODULE,
> + .acpi_match_table = ACPI_PTR(nau8825_acpi_match),
> + },
> + .probe = nau8825_i2c_probe,
> + .remove = (nau8825_i2c_remove),
> + .id_table = nau8825_i2c_id,
> +};
> +module_i2c_driver(nau8825_i2c_driver);
> +
> +MODULE_DESCRIPTION("ASoC NAU8825 codec driver");
> +MODULE_AUTHOR("Nuvoton");
> +MODULE_LICENSE("GPL v2");
> diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h
> new file mode 100644
> index 0000000..3050e7c
> --- /dev/null
> +++ b/sound/soc/codecs/nau8825.h
> @@ -0,0 +1,399 @@
> +/*
> + * nau8825.h
> + *
> + * Copyright 2015 Nuvoton Technology Corp.
> + * Author: Meng-Huang Kuo <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _NAU8825_H
> +#define _NAU8825_H
> +
> +#define NAU8825_RESET 0x00
> +#define NAU8825_ENA_CTRL 0x01
> +#define NAU8825_CLK_EN 0x02
> +#define NAU8825_CLK_DIVIDER 0x03
> +#define NAU8825_FLL_1 0x04
> +#define NAU8825_FLL_2 0x05
> +#define NAU8825_FLL_3 0x06
> +#define NAU8825_FLL_4 0x07
> +#define NAU8825_FLL_5 0x08
> +#define NAU8825_FLL_6 0x09
> +#define NAU8825_HEADSET_CTRL 0x0C
> +#define NAU8825_JACK_DET_CTRL 0x0D
> +#define NAU8825_IRQ_MASK 0x0F
> +#define NAU8825_IRQ_STATUS 0x10
> +#define NAU8825_IRQ_CLEAR 0x11
> +#define NAU8825_BTN_STATUS 0x11
> +#define NAU8825_IRQ_CTRL 0x12
> +#define NAU8825_SAR_ADC 0x13
> +#define NAU8825_VDET_COEFFICIENT 0x14
> +#define NAU8825_VDET_THRESHOLD_1 0x15
> +#define NAU8825_VDET_THRESHOLD_2 0x16
> +#define NAU8825_GPIO34_CTRL 0x19
> +#define NAU8825_GPIO12_CTRL 0x1A
> +#define NAU8825_TDM_CTRL 0x1B
> +#define NAU8825_I2S_PCM_CTRL_1 0x1C
> +#define NAU8825_I2S_PCM_CTRL_2 0x1D
> +#define NAU8825_BIQ_CTRL 0x20
> +#define NAU8825_BIQ_COF1 0x21
> +#define NAU8825_BIQ_COF2 0x22
> +#define NAU8825_BIQ_COF3 0x23
> +#define NAU8825_BIQ_COF4 0x24
> +#define NAU8825_BIQ_COF5 0x25
> +#define NAU8825_BIQ_COF6 0x26
> +#define NAU8825_BIQ_COF7 0x27
> +#define NAU8825_BIQ_COF8 0x28
> +#define NAU8825_BIQ_COF9 0x29
> +#define NAU8825_BIQ_COF10 0x2A
> +#define NAU8825_ADC_RATE 0x2B
> +#define NAU8825_DAC_CTRL1 0x2C
> +#define NAU8825_DAC_CTRL2 0x2D
> +#define NAU8825_DAC_DGAIN_CTRL 0x2F
> +#define NAU8825_ADC_DGAIN_CTRL 0x30
> +#define NAU8825_DAC_MUTE_CTRL 0x31
> +#define NAU8825_HSVOL_CTRL 0x32
> +#define NAU8825_DACL_CTRL 0x33
> +#define NAU8825_DACR_CTRL 0x34
> +#define NAU8825_ADC_DRC_KNEE_IP12 0x38
> +#define NAU8825_ADC_DRC_KNEE_IP34 0x39
> +#define NAU8825_ADC_DRC_SLOPES 0x3A
> +#define NAU8825_ADC_DRC_ATKDCY 0x3B
> +#define NAU8825_DAC_DRC_KNEE_IP12 0x45
> +#define NAU8825_DAC_DRC_KNEE_IP34 0x46
> +#define NAU8825_DAC_DRC_SLOPES 0x47
> +#define NAU8825_DAC_DRC_ATKDCY 0x48
> +#define NAU8825_IMM_MODE_CTRL 0x4C
> +#define NAU8825_IMM_RMS_VALUE 0x4D
> +#define NAU8825_CLASSG_CTRL 0x50
> +#define NAU8825_I2C_DEVICE_ID 0x58
> +#define NAU8825_SAR_ADC_OUTPUT 0x59
> +#define NAU8825_BIAS_ADJ 0x66
> +#define NAU8825_ANALOG_CTRL_2 0x6A
> +#define NAU8825_ANALOG_ADC_1 0x71
> +#define NAU8825_ANALOG_ADC_2 0x72
> +#define NAU8825_DAC_CTRL 0x73
> +#define NAU8825_MIC_BIAS 0x74
> +#define NAU8825_BOOST 0x76
> +#define NAU8825_POWER_UP_CTRL 0x7F
> +#define NAU8825_CHARGE_BUMP_CTRL 0x80
> +#define NAU8825_CHARGE_BUMP_RD 0x81
> +#define NAU8825_GENERAL_STATUS 0x82
> +#define NAU8825_MAX_REGISTER 0xFF
> +
> +/* reg. NAU8825_ENA_CTRL (0x01) */
> +#define NAU8825_R_DAC_MASK (0x1 << 10)
> +#define NAU8825_R_DAC_EN (0x1 << 10)
> +#define NAU8825_R_DAC_DIS (0x0 << 10)
> +#define NAU8825_L_DAC_MASK (0x1 << 9)
> +#define NAU8825_L_DAC_EN (0x1 << 9)
> +#define NAU8825_L_DAC_DIS (0x0 << 9)
> +#define NAU8825_DAC_MASK (0x3 << 9)
> +#define NAU8825_DAC_EN (0x3 << 9)
> +#define NAU8825_DAC_DIS (0x0 << 9)
> +
> +#define NAU8825_R_DAC_MASK (0x1 << 10)
> +#define NAU8825_R_DAC_EN (0x1 << 10)
> +#define NAU8825_R_DAC_DIS (0x0 << 10)
> +#define NAU8825_L_DAC_MASK (0x1 << 9)
> +#define NAU8825_L_DAC_EN (0x1 << 9)
> +#define NAU8825_L_DAC_DIS (0x0 << 9)
> +#define NAU8825_ADC_MASK (0x1 << 8)
> +#define NAU8825_ADC_EN (0x1 << 8)
> +#define NAU8825_ADC_DIS (0x0 << 8)
> +#define NAU8825_ADC_CLK_MASK (0x1 << 7)
> +#define NAU8825_ADC_CLK_EN (0x1 << 7)
> +#define NAU8825_ADC_CLK_DIS (0x0 << 7)
> +#define NAU8825_DAC_CLK_MASK (0x1 << 6)
> +#define NAU8825_DAC_CLK_EN (0x1 << 6)
> +#define NAU8825_DAC_CLK_DIS (0x0 << 6)
> +#define NAU8825_IMM_CLK_MASK (0x1 << 5)
> +#define NAU8825_IMM_CLK_EN (0x1 << 5)
> +#define NAU8825_IMM_CLK_DIS (0x0 << 5)
> +#define NAU8825_I2S_CLK_MASK (0x1 << 4)
> +#define NAU8825_I2S_CLK_EN (0x1 << 4)
> +#define NAU8825_I2S_CLK_DIS (0x0 << 4)
> +#define NAU8825_BIST_CLK_MASK (0x1 << 3)
> +#define NAU8825_BIST_CLK_EN (0x1 << 3)
> +#define NAU8825_BIST_CLK_DIS (0x0 << 3)
> +#define NAU8825_OTP_CLK_MASK (0x1 << 2)
> +#define NAU8825_OTP_CLK_EN (0x1 << 2)
> +#define NAU8825_OTP_CLK_DIS (0x0 << 2)
> +#define NAU8825_SAR_CLK_MASK (0x1 << 1)
> +#define NAU8825_SAR_CLK_EN (0x1 << 1)
> +#define NAU8825_SAR_CLK_DIS (0x0 << 1)
> +#define NAU8825_DRC_CLK_MASK (0x1 << 0)
> +#define NAU8825_DRC_CLK_EN (0x1 << 0)
> +#define NAU8825_DRC_CLK_DIS (0x0 << 0)
> +
> +/* reg. NAU8825_CLK_DIVIDER (0x03) */
> +#define NAU8825_SYSCLK_EN_MASK (0x1 << 15)
> +#define NAU8825_SYSCLK_EN (0x1 << 15)
> +#define NAU8825_SYSCLK_DIS (0x0 << 15)
> +#define NAU8825_CLK_MCLK_SRC_MASK (0xF << 0)
> +
> +/* reg. NAU8825_FLL_1 (0x04) */
> +#define NAU8825_FLL_RATIO_MASK (0x7F << 0)
> +
> +/* reg. NAU8825_FLL_3 (0x06) */
> +#define NAU8825_FLL_INTEGER_MASK (0x3FF << 0)
> +
> +/* reg. NAU8825_FLL_4 (0x07) */
> +#define NAU8825_FLL_REF_DIV_MASK (0x3 << 10)
> +
> +/* reg. NAU8825_FLL_5 (0x08) */
> +#define NAU8825_FLL_FILTER_SW_MASK (0x1 << 14)
> +
> +/* reg. NAU8825_FLL_6 (0x09) */
> +#define NAU8825_DCO_EN_MASK (0x1 << 15)
> +#define NAU8825_DCO_EN (0x1 << 15)
> +#define NAU8825_DCO_DIS (0x0 << 15)
> +#define NAU8825_SDM_EN_MASK (0x1 << 14)
> +
> +/* reg. NAU8825_HEADSET_CTRL (0x0c) */
> +#define NAU8825_RESET_HSD_MASK (0x1 << 15)
> +#define NAU8825_RESET_HSD_EN (0x1 << 15)
> +#define NAU8825_RESET_HSD_DIS (0x0 << 15)
> +#define NAU8825_AUTO_DETECT_MASK (0x1 << 6)
> +#define NAU8825_AUTO_DETECT_EN (0x1 << 6)
> +#define NAU8825_AUTO_DETECT_DIS (0x0 << 6)
> +#define NAU8825_MANUAL_START_MASK (0x1 << 4)
> +#define NAU8825_MANUAL_START_EN (0x1 << 4)
> +#define NAU8825_MANUAL_START_DIS (0x0 << 4)
> +#define NAU8825_ENGND_MASK (0x3 << 2)
> +
> +/* reg. NAU8825_JACK_DET_CTRL (0x0d) */
> +#define NAU8825_DB_BP_MODE_MASK (0x1 << 8)
> +#define NAU8825_DB_BP_MODE_EN (0x1 << 8)
> +#define NAU8825_DB_BP_MODE_DIS (0x0 << 8)
> +
> +/* reg. NAU8825_IRQ_MASK (0x0f) */
> +#define NAU8825_IRQ_QE_MASK (0x1 << 11)
> +#define NAU8825_IRQ_QE_EN (0x1 << 11)
> +#define NAU8825_IRQ_QE_DIS (0x0 << 11)
> +#define NAU8825_IRQ_EJECT_MASK (0x1 << 2)
> +#define NAU8825_IRQ_EJECT_EN (0x1 << 2)
> +#define NAU8825_IRQ_EJECT_DIS (0x0 << 2)
> +
> +
> +/* reg. NAU8825_IRQ_STATUS (0x10) */
> +#define NAU8825_HSD_COMPLETE_INT (0x1 << 10)
> +#define NAU8825_EMRG_INT (0x1 << 9)
> +#define NAU8825_RMS_INT (0x1 << 8)
> +#define NAU8825_BTN_RELEASE_INT (0x1 << 7)
> +#define NAU8825_LONG_BTN_INT (0x1 << 6)
> +#define NAU8825_SHORT_BTN_INT (0x1 << 5)
> +#define NAU8825_BTN_INT (0x7 << 5)
> +#define NAU8825_MIC_DET_INT (0x1 << 4)
> +#define NAU8825_JACK_EJCT_INT (0x3 << 2)
> +#define NAU8825_JACK_DET_INT (0x3 << 0)
> +#define NAU8825_JACK_OUT (0x1 << 2)
> +#define NAU8825_JACK_IN (0x1 << 0)
> +#define NAU8825_JACK_INT (0xF << 0)
> +
> +/* reg. NAU8825_BTN_STATUS (0x11) */
> +#define NAU8825_SHORT_BTN_MASK (0xFF << 8)
> +#define NAU8825_LONG_BTN_MASK (0xFF << 0)
> +#define NAU8825_BTN_0 (0x01 << 0)
> +#define NAU8825_BTN_1 (0x01 << 1)
> +#define NAU8825_BTN_2 (0x01 << 2)
> +#define NAU8825_BTN_3 (0x01 << 3)
> +
> +/* reg. NAU8825_IRQ_CTRL (0x12) */
> +#define NAU8825_HEADSET_INT_MASK (0x1 << 10)
> +#define NAU8825_HEADSET_INT_EN (0x0 << 10)
> +#define NAU8825_HEADSET_INT_DIS (0x1 << 10)
> +#define NAU8825_RMS_INT_MASK (0x1 << 8)
> +#define NAU8825_RMS_INT_EN (0x0 << 8)
> +#define NAU8825_RMS_INT_DIS (0x1 << 8)
> +#define NAU8825_KEYREL_INT_MASK (0x1 << 7)
> +#define NAU8825_KEYREL_INT_EN (0x0 << 7)
> +#define NAU8825_KEYREL_INT_DIS (0x1 << 7)
> +#define NAU8825_LONGKEY_INT_MASK (0x1 << 6)
> +#define NAU8825_LONGKEY_INT_EN (0x0 << 6)
> +#define NAU8825_LONGKEY_INT_DIS (0x1 << 6)
> +#define NAU8825_SHORTKEY_INT_MASK (0x1 << 5)
> +#define NAU8825_SHORTKEY_INT_EN (0x0 << 5)
> +#define NAU8825_SHORTKEY_INT_DIS (0x1 << 5)
> +#define NAU8825_EJECT_INT_MASK (0x1 << 2)
> +#define NAU8825_EJECT_INT_EN (0x0 << 2)
> +#define NAU8825_EJECT_INT_DIS (0x1 << 2)
> +#define NAU8825_JACK_IN_INT_MASK (0x1 << 0)
> +#define NAU8825_JACK_IN_INT_EN (0x0 << 0)
> +#define NAU8825_JACK_IN_INT_DIS (0x1 << 0)
> +
> +/* reg. NAU8825_SAR_ADC (0x13) */
> +#define NAU8825_SAR_EN_MASK (0x1 << 12)
> +#define NAU8825_SAR_EN (0x1 << 12)
> +#define NAU8825_SAR_DIS (0x0 << 12)
> +#define NAU8825_JKSLV_MASK (0x1 << 11)
> +#define NAU8825_JKSLV_EN (0x1 << 11)
> +#define NAU8825_JKSLV_DIS (0x0 << 11)
> +
> +/* reg. NAU8825_I2S_PCM_CTRL_1 (0x1C) */
> +#define NAU8825_I2S_TRI_STATE_MASK (0x1 << 15)
> +#define NAU8825_I2S_TRI_STATE_EN (0x1 << 15)
> +#define NAU8825_I2S_TRI_STATE_DIS (0x0 << 15)
> +#define NAU8825_I2S_BP_MASK (0x1 << 7)
> +#define NAU8825_I2S_BP_INV (0x1 << 7)
> +#define NAU8825_I2S_PCMB_MASK (0x1 << 6)
> +#define NAU8825_I2S_PCMB_EN (0x1 << 6)
> +#define NAU8825_I2S_DL_MASK (0x3 << 2)
> +#define NAU8825_I2S_DF_MASK 0x3
> +#define NAU8825_I2S_DF_RIGHT 0x0
> +#define NAU8825_I2S_DF_LEFT 0x1
> +#define NAU8825_I2S_DF_I2S 0x2
> +#define NAU8825_I2S_DF_PCM_A 0x3
> +#define NAU8825_I2S_DF_PCM_B 0x3
> +
> +/* reg. NAU8825_I2S_PCM_CTRL_2 (0x1D) */
> +#define NAU8825_I2S_MS_MASK (0x1 << 3)
> +#define NAU8825_I2S_MS_MASTER (0x1 << 3)
> +#define NAU8825_I2S_MS_SLAVE (0x0 << 3)
> +
> +/* reg. NAU8825_BIQ_CTRL (0x20) */
> +#define NAU8825_BIQ_WRT_MASK (0x1 << 4)
> +#define NAU8825_BIQ_WRT_EN (0x1 << 4)
> +#define NAU8825_BIQ_WRT_DIS (0x0 << 4)
> +
> +/* reg. NAU8825_ADC_DGAIN_CTRL (0x30) */
> +#define NAU8825_ADC_DGAIN_SFT 0
> +
> +/* reg. NAU8825_DAC_MUTE_CTRL (0x31) */
> +#define NAU8825_SOFT_MUTE_MASK (0x1 << 9)
> +#define NAU8825_SOFT_MUTE_EN (0x1 << 9)
> +#define NAU8825_SOFT_MUTE_DIS (0x0 << 9)
> +
> +/* reg. NAU8825_HSVOL_CTRL (0x32) */
> +#define NAU8825_R_MUTE (0x1 << 15)
> +#define NAU8825_R_MUTE_SFT 15
> +#define NAU8825_L_MUTE (0x1 << 14)
> +#define NAU8825_L_MUTE_SFT 14
> +#define NAU8825_L_HSVOL_SFT 6
> +#define NAU8825_R_HSVOL_SFT 0
> +
> +/* reg. NAU8825_IMM_MODE_CTRL (0x4C) */
> +#define NAU8825_IMM_MODE_EN_MASK (0x1 << 3)
> +#define NAU8825_IMM_MODE_EN (0x1 << 3)
> +#define NAU8825_IMM_MODE_DIS (0x0 << 3)
> +
> +/* reg. NAU8825_CLASSG_CTRL (0x50) */
> +#define NAU8825_CLASSG_PATH_MASK (0x3 << 1)
> +#define NAU8825_CLASSG_PATH_EN (0x3 << 1)
> +#define NAU8825_CLASSG_PATH_DIS (0x3 << 0)
> +#define NAU8825_CLASSG_LEFT_SHIFT 1
> +#define NAU8825_CLASSG_EN_SHIFT 0
> +#define NAU8825_CLASSG_EN_MASK (0x1 << 0)
> +#define NAU8825_CLASSG_EN_SHIFT 0
> +
> +/*#define NAU8825_I2C_DEVICE_ID (0x58) */
> +#define NAU8825_GPIO2JD1 (0x1 << 7)
> +
> +/* reg. NAU8825_BIAS_ADJ (0x66) */
> +#define NAU8825_VMID_MASK (0x1 << 6)
> +#define NAU8825_VMID_EN (0x1 << 6)
> +#define NAU8825_VMID_DIS (0x0 << 6)
> +#define NAU8825_VMIDSEL_MASK (0x3 << 4)
> +#define NAU8825_VMIDSEL_125KOHM (0x2 << 4)
> +
> +/* reg. NAU8825_ANALOG_CTRL_2 (0x6A) */
> +#define NAU8825_VMID_MASK (0x1 << 6)
> +#define NAU8825_VMID_EN (0x1 << 6)
> +#define NAU8825_VMID_DIS (0x0 << 6)
> +
> +/* reg. NAU8825_DAC_CTRL (0x73) */
> +#define NAU8825_DAC_R_SFT 13
> +#define NAU8825_DAC_L_SFT 12
> +#define NAU8825_DAC_CLK_R_SFT 9
> +#define NAU8825_DAC_CLK_L_SFT 8
> +#define NAU8825_DAC_LR_MASK (0x3 << 12)
> +#define NAU8825_DAC_LR_EN (0x3 << 12)
> +#define NAU8825_DAC_LR_DIS (0x0 << 12)
> +#define NAU8825_DAC_CLK_LR_MASK (0x3 << 8)
> +#define NAU8825_DAC_CLK_LR_EN (0x3 << 8)
> +#define NAU8825_DAC_CLK_LR_DIS (0x0 << 8)
> +#define NAU8825_DAC_CLK_DELAY_MASK (0x7 << 4)
> +#define NAU8825_DAC_REF_VOLT_MASK (0x3 << 2)
> +
> +/* reg. NAU8825_MIC_BIAS (0x74) */
> +#define NAU8825_INT2KB_MSK (0x1 << 14)
> +#define NAU8825_INT2KB_EN (0x1 << 14)
> +#define NAU8825_INT2KB_DIS (0x0 << 14)
> +#define NAU8825_INT2KA_MSK (0x1 << 12)
> +#define NAU8825_INT2KA_EN (0x1 << 12)
> +#define NAU8825_INT2KA_DIS (0x0 << 12)
> +#define NAU8825_MIC_POWERUP_MSK (0x1 << 8)
> +#define NAU8825_MIC_POWERUP_EN (0x1 << 8)
> +#define NAU8825_MIC_POWERUP_DIS (0x0 << 8)
> +#define NAU8825_MIC_BIAS_LVL_MSK (0x7 << 0)
> +
> +/* reg. NAU8825_BOOST (0x76) */
> +#define NAU8825_G_BIAS_MASK (0x1 << 12)
> +#define NAU8825_G_BIAS_SFT 12
> +#define NAU8825_G_BIAS_EN (0x1 << 12)
> +#define NAU8825_G_BIAS_DIS (0x0 << 12)
> +#define NAU8825_BOOST_DRV_MASK (0x1 << 9)
> +#define NAU8825_BOOST_DRV_EN (0x0 << 9)
> +#define NAU8825_BOOST_DRV_DIS (0x1 << 9)
> +
> +/* reg. NAU8825_POWER_UP_CTRL (0x7F) */
> +#define NAU8825_FEPGA_MASK (0x1 << 14)
> +#define NAU8825_FEPGA_EN (0x1 << 14)
> +#define NAU8825_FEPGA_DIS (0x0 << 14)
> +#define NAU8825_FEPGA_GAIN_MASK (0x3F << 8)
> +#define NAU8825_OUTPUT_DRIVER_MASK (0x3F << 0)
> +#define NAU8825_OUTPUT_DRIVER_EN (0x3F << 0)
> +#define NAU8825_OUTPUT_DRIVER_DIS (0x0 << 0)
> +#define NAU8825_PUP_INTEG_MASK (0x3 << 4)
> +#define NAU8825_PUP_INTEG_ENA (0x3 << 4)
> +#define NAU8825_PUP_INTEG_DIS (0x0 << 4)
> +#define NAU8825_PUP_OUT_MASK (0x3 << 2)
> +#define NAU8825_PUP_OUT_ENA (0x3 << 2)
> +#define NAU8825_PUP_OUT_DIS (0x0 << 2)
> +#define NAU8825_PUP_MAIN_MASK (0x3 << 0)
> +#define NAU8825_PUP_MAIN_ENA (0x3 << 0)
> +#define NAU8825_PUP_MAIN_DIS (0x0 << 0)
> +
> +
> +/* reg. NAU8825_CHARGE_BUMP_CTRL (0x80) */
> +#define NAU8825_PD_DAC_MASK (0x3 << 8)
> +#define NAU8825_PD_DAC_ENA (0x3 << 8)
> +#define NAU8825_PD_DAC_DIS (0x0 << 8)
> +#define NAU8825_CB_CLK_MASK (0x1 << 7)
> +#define NAU8825_CB_CLK_EN (0x1 << 7)
> +#define NAU8825_CB_CLK_DIS (0x0 << 7)
> +#define NAU8825_CB_MASK (0x1 << 5)
> +#define NAU8825_CB_EN (0x1 << 5)
> +#define NAU8825_CB_DIS (0x0 << 5)
> +
> +/* reg. NAU8825_GENERAL_STATUS (0x82) */
> +#define NAU8825_OUT12_MASK (0x3 << 10)
> +#define NAU8825_OUT2EN_OUT1EN (0x3 << 10)
> +#define NAU8825_OUT2EN_OUT1DIS (0x2 << 10)
> +#define NAU8825_OUT2DIS_OUT1EN (0x1 << 10)
> +#define NAU8825_OUT2DIS_OUT1DIS (0x0 << 10)
> +
> +/* Volume Rescale */
> +#define NAU8825_VOL_RSCL_RANGE 0x36
> +#define NAU8825_ADC_VOL_RSCL_RANGE 0xFF
> +
> +/* Data format */
> +#define NAU8825_I2S_DL_16 (0x0 << 2)
> +#define NAU8825_I2S_DL_20 (0x1 << 2)
> +#define NAU8825_I2S_DL_24 (0x2 << 2)
> +#define NAU8825_I2S_DL_32 (0x3 << 2)
> +
> +enum {
> + NAU8825_INTERNALCLOCK = 0,
> + NAU8825_MCLK,
> +};
> +
> +struct nau8825_priv {
> + struct regmap *regmap;
> + struct i2c_client *i2c;
> +};
> +#endif /* _NAU8825_H */
> +
> --
> 1.9.3
>
> _______________________________________________
> Alsa-devel mailing list
> [email protected]
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Anatol,
Thanks for your suggestion. We are working on different architectures to
support NAU8825 ALSA driver, and I also think it is better we can have a
cooperation for driver development and upstream. We have checked your
code, and we think your implement version should more follow the ALSA
upstream coding standards.
We have another version of ALSA driver, which also supports most
features as you listed. And I think you already got it from our HW
engineers. The major difference between our architectures should be the
flow and sequence in sleep mode, and some other architecture dependence
codes.
For the upstream, we think it is better to have only one version source
and could support different architectures. Do you agree to use your
version to go on the upstream in future? If yes, we can port your driver
to our test platform, and then give the feedback to you.
On 2015/7/23 上午 01:57, Anatol Pomozov wrote:
> Hi Chih-Chiang
>
> On Mon, Jul 13, 2015 at 12:33 AM, Chih-Chiang Chang
> <[email protected]> wrote:
>> The NAU88L25 is an ultra-low power high performance audio codec designed
>> for smartphone, tablet PC, and other portable devices by Nuvoton, now
>> add linux driver support for it.
>
> At ChromeOS we work with Nuvoton hw engineers on driver for this nice
> chip as well.
>
> Here is current driver code
> https://github.com/anatol/linux/blob/nau8825/sound/soc/codecs/nau8825.c
>
> The functionality is mostly ready. Our driver handles playback,
> capture, mic jack detection, an button presses (4 buttons according
> Android specification). We need to resolve a few remaining issues,
> such as
> - chip needs better way to recognize high-impedance input (e.g. Bose
> Quiet Comfort 15 headset)
> - implement headset cross talk automatic configuration
> - general code cleanup
>
> But otherwise driver is functional and used for testing in our next
> generation device.
>
>
> What do you think about joining efforts on this software development
> to make great driver for this chip?
>
>> Signed-off-by: Chih-Chiang Chang <[email protected]>
>> ---
>> v3->v2:
>> - fix the wrong definition of reg_default
>> - fix the flow of set_sys_clk() and nau8825_set_bias_level()
>> - remove unnecessary code in nau8825_volatile_register() and
>> nau8825_i2c_probe()
>> - add trigger function for ADC/DAC control
>> - add some register definitions
>> - fix some coding style issues
>> v2->v1:
>> - fixes according to Lars-Peter Clausen's review comments
>> - removes unused platform data file
>> - corrects the naming of DAPM input widget
>> - fixes some wrong coding of SOC widgets and other codes
>> - adds definition and remark for config FLL clock
>> - moves the code of reset hardware registers from codec_probe() to
>> i2c_probe()
>> - removes unused codes
>>
>> sound/soc/codecs/Kconfig | 5 +
>> sound/soc/codecs/Makefile | 2 +
>> sound/soc/codecs/nau8825.c | 724
>> +++++++++++++++++++++++++++++++++++++++++++++
>> sound/soc/codecs/nau8825.h | 399 +++++++++++++++++++++++++
>> 4 files changed, 1130 insertions(+)
>> create mode 100644 sound/soc/codecs/nau8825.c
>> create mode 100644 sound/soc/codecs/nau8825.h
Hi
On Sun, Jul 26, 2015 at 11:25 PM, Chih-Chiang Chang
<[email protected]> wrote:
> Hi Anatol,
>
> Thanks for your suggestion. We are working on different architectures to
> support NAU8825 ALSA driver, and I also think it is better we can have a
> cooperation for driver development and upstream. We have checked your
> code, and we think your implement version should more follow the ALSA
> upstream coding standards.
>
> We have another version of ALSA driver, which also supports most
> features as you listed. And I think you already got it from our HW
> engineers. The major difference between our architectures should be the
> flow and sequence in sleep mode, and some other architecture dependence
> codes.
The driver does not have suspend/resume support yet. It would be great
to add it in the future.
> For the upstream, we think it is better to have only one version source
> and could support different architectures. Do you agree to use your
> version to go on the upstream in future?
Yes, it would be great. I will post my code upstream shortly.
Please let me know if you have any suggestions for the driver code.
> If yes, we can port your driver
> to our test platform, and then give the feedback to you.
>
> On 2015/7/23 上午 01:57, Anatol Pomozov wrote:
>> Hi Chih-Chiang
>>
>> On Mon, Jul 13, 2015 at 12:33 AM, Chih-Chiang Chang
>> <[email protected]> wrote:
>>> The NAU88L25 is an ultra-low power high performance audio codec designed
>>> for smartphone, tablet PC, and other portable devices by Nuvoton, now
>>> add linux driver support for it.
>>
>> At ChromeOS we work with Nuvoton hw engineers on driver for this nice
>> chip as well.
>>
>> Here is current driver code
>> https://github.com/anatol/linux/blob/nau8825/sound/soc/codecs/nau8825.c
>>
>> The functionality is mostly ready. Our driver handles playback,
>> capture, mic jack detection, an button presses (4 buttons according
>> Android specification). We need to resolve a few remaining issues,
>> such as
>> - chip needs better way to recognize high-impedance input (e.g. Bose
>> Quiet Comfort 15 headset)
>> - implement headset cross talk automatic configuration
>> - general code cleanup
>>
>> But otherwise driver is functional and used for testing in our next
>> generation device.
>>
>>
>> What do you think about joining efforts on this software development
>> to make great driver for this chip?
>>
>>> Signed-off-by: Chih-Chiang Chang <[email protected]>
>>> ---
>>> v3->v2:
>>> - fix the wrong definition of reg_default
>>> - fix the flow of set_sys_clk() and nau8825_set_bias_level()
>>> - remove unnecessary code in nau8825_volatile_register() and
>>> nau8825_i2c_probe()
>>> - add trigger function for ADC/DAC control
>>> - add some register definitions
>>> - fix some coding style issues
>>> v2->v1:
>>> - fixes according to Lars-Peter Clausen's review comments
>>> - removes unused platform data file
>>> - corrects the naming of DAPM input widget
>>> - fixes some wrong coding of SOC widgets and other codes
>>> - adds definition and remark for config FLL clock
>>> - moves the code of reset hardware registers from codec_probe() to
>>> i2c_probe()
>>> - removes unused codes
>>>
>>> sound/soc/codecs/Kconfig | 5 +
>>> sound/soc/codecs/Makefile | 2 +
>>> sound/soc/codecs/nau8825.c | 724
>>> +++++++++++++++++++++++++++++++++++++++++++++
>>> sound/soc/codecs/nau8825.h | 399 +++++++++++++++++++++++++
>>> 4 files changed, 1130 insertions(+)
>>> create mode 100644 sound/soc/codecs/nau8825.c
>>> create mode 100644 sound/soc/codecs/nau8825.h