From: Fabio Estevam <[email protected]>
The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need
the PER and IPG clocks to be functional, so add the clock entries.
This also fixes the following schema warning:
imx8qm-apalis-eval.dtb: jpegdec@58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Mirela Rabulea <[email protected]>
---
Changes since v4:
- Remove redundant description and update subject prefix (per Krzysztof's feddback)
Changes since v3:
- Add items for clocks (per Krzysztof's feddback)
- Add description for clocks (per Conor's feddback to the other similar patch from Alexander)
- Add "media:" to the subject
- Add Mirela's signed-off
- For the similar patches that were sent for this issue, should Co-developed-by/Signed-off-by be added? Alexander Stein? Frank Li?
Changes since v2:
- Remove clock-names. (Mirela)
.../devicetree/bindings/media/nxp,imx8-jpeg.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 3d9d1db37040..2be30c5fdc83 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -31,6 +31,11 @@ properties:
reg:
maxItems: 1
+ clocks:
+ items:
+ - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
+ - description: IP bus clock for register access (ipg)
+
interrupts:
description: |
There are 4 slots available in the IP, which the driver may use
@@ -49,6 +54,7 @@ properties:
required:
- compatible
- reg
+ - clocks
- interrupts
- power-domains
@@ -56,12 +62,15 @@ additionalProperties: false
examples:
- |
+ #include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/firmware/imx/rsrc.h>
jpegdec: jpegdec@58400000 {
compatible = "nxp,imx8qxp-jpgdec";
reg = <0x58400000 0x00050000 >;
+ clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
@@ -76,6 +85,8 @@ examples:
jpegenc: jpegenc@58450000 {
compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
reg = <0x58450000 0x00050000 >;
+ clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+ <&img_jpeg__lpcg IMX_LPCG_CLK_4>;
interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
--
2.25.1
Hi Mirela,
On Mon, Apr 8, 2024 at 4:58 AM Mirela Rabulea <[email protected]> wrote:
>
> From: Fabio Estevam <[email protected]>
>
> The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need
> the PER and IPG clocks to be functional, so add the clock entries.
>
> This also fixes the following schema warning:
>
> imx8qm-apalis-eval.dtb: jpegdec@58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
>
> Signed-off-by: Fabio Estevam <[email protected]>
> Signed-off-by: Mirela Rabulea <[email protected]>
Thanks for submitting this series.
In the Subject, you added an extra : "..nxp,imx8-jpeg:: Add". Please
remove the extra :.
My From and Signed-off-by tags e-mails do not match.
Please use the email from the Signed-off-by in the From field as well.
The same applies to patch 2/2.
Thanks