IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
Gen2 one is already supported, document the bindings for the Gen3 one.
Signed-off-by: Robert Marko <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 8b850c5ab116..220788ce215f 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -19,6 +19,7 @@ properties:
enum:
- qcom,ipq6018-qmp-pcie-phy
- qcom,ipq6018-qmp-usb3-phy
+ - qcom,ipq8074-qmp-gen3-pcie-phy
- qcom,ipq8074-qmp-pcie-phy
- qcom,ipq8074-qmp-usb3-phy
- qcom,msm8996-qmp-pcie-phy
@@ -312,6 +313,7 @@ allOf:
contains:
enum:
- qcom,ipq6018-qmp-pcie-phy
+ - qcom,ipq8074-qmp-gen3-pcie-phy
- qcom,ipq8074-qmp-pcie-phy
then:
properties:
--
2.36.1
IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
Gen2 one is already supported, so add the support for the Gen3 one.
It uses the same register layout as IPQ6018.
Signed-off-by: Robert Marko <[email protected]>
---
Changes in v2:
* Rebase onto next-20220621 to apply on the refactored driver
* Remove non existant has_phy_com_ctrl and has_lane_rst
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 171 ++++++++++++++++++++++-
1 file changed, 169 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index b2cd0cf965d8..b4836417b2c0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -450,6 +450,133 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
};
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BIAS_EN_CTRL_BY_PSM, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP_EN, 0x42),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE0, 0x355),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE0, 0x35555),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE0, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE0, 0x1a0a),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE0, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_SELECT, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_BUF_ENABLE, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SYSCLK_EN_SEL, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_HSCLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DEC_START_MODE1, 0x68),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START3_MODE1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START2_MODE1, 0x2aa),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_DIV_FRAC_START1_MODE1, 0x2aaab),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP2_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_LOCK_CMP1_MODE1, 0x3414),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CP_CTRL_MODE1, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_PLL_CCTRL_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN1_MODE1, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_INTEGLOOP_GAIN0_MODE1, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE2_MODE1, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_VCO_TUNE1_MODE1, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORE_CLK_EN, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE0, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_EP_DIV_MODE1, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_PLL_CLK_ENABLE1, 0x90),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_TX0_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0xe),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1b),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_PI_CONTROLS, 0x70),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x73),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_10_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_LOW, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH2, 0xc8),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH3, 0x09),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_01_HIGH4, 0xb1),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_LOW, 0xf0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH2, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH3, 0xd3),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_MODE_00_HIGH4, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_FO_GAIN, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_RX0_UCDR_SO_GAIN, 0x02),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_gen3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_L, 0x9),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNT_VAL_H_TOL, 0x42),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(PCS_COM_FLL_CNTRL1, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_H, 0x0),
+ QMP_PHY_INIT_CFG(PCS_COM_P2U3_WAKEUP_DLY_TIME_AUXCLK_L, 0x1),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_H, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_H, 0x00),
+ QMP_PHY_INIT_CFG(PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L, 0x01),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG1, 0x11),
+ QMP_PHY_INIT_CFG(PCS_PCIE_EQ_CONFIG2, 0xb),
+ QMP_PHY_INIT_CFG(PCS_PCIE_POWER_STATE_CONFIG4, 0x07),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_CONFIG2, 0x52),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG2, 0x50),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG4, 0x1a),
+ QMP_PHY_INIT_CFG(PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x6),
+ QMP_PHY_INIT_CFG(PCS_COM_G12S1_TXDEEMPH_M3P5DB, 0x10),
+ QMP_PHY_INIT_CFG(PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_DCC_CAL_CONFIG, 0x01),
+ QMP_PHY_INIT_CFG(PCS_COM_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(PCS_COM_REFGEN_REQ_CONFIG1, 0x0d),
+};
+
static const struct qmp_phy_init_tbl sdm845_qmp_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
@@ -1421,6 +1548,34 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.pwrdn_delay_max = 1005, /* us */
};
+static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_gen3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_gen3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_tx_tbl),
+ .rx_tbl = ipq8074_pcie_gen3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_gen3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_gen3_pcs_tbl),
+ .clk_list = ipq8074_pciephy_clk_l,
+ .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l),
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = ipq_pciephy_gen3_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
.type = PHY_TYPE_PCIE,
.nlanes = 1,
@@ -2107,6 +2262,7 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
{
struct clk_fixed_rate *fixed;
struct clk_init_data init = { };
+ u32 rate;
int ret;
ret = of_property_read_string(np, "clock-output-names", &init.name);
@@ -2121,8 +2277,16 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
init.ops = &clk_fixed_rate_ops;
- /* controllers using QMP phys use 125MHz pipe clock interface */
- fixed->fixed_rate = 125000000;
+ /*
+ * Controllers using QMP PHY-s use 125MHz pipe clock interface
+ * unless other frequency is specified in the DTS.
+ */
+ ret = of_property_read_u32(np, "clock-output-rate", &rate);
+ if (ret)
+ fixed->fixed_rate = 125000000;
+ else
+ fixed->fixed_rate = rate;
+
fixed->hw.init = &init;
ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
@@ -2255,6 +2419,9 @@ static const struct of_device_id qcom_qmp_phy_pcie_of_match_table[] = {
}, {
.compatible = "qcom,ipq8074-qmp-pcie-phy",
.data = &ipq8074_pciephy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy",
+ .data = &ipq8074_pciephy_gen3_cfg,
}, {
.compatible = "qcom,ipq6018-qmp-pcie-phy",
.data = &ipq6018_pciephy_cfg,
--
2.36.1
On Tue, 21 Jun 2022 at 14:18, Robert Marko <[email protected]> wrote:
>
> IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
> Gen2 one is already supported, so add the support for the Gen3 one.
> It uses the same register layout as IPQ6018.
>
> Signed-off-by: Robert Marko <[email protected]>
> ---
> Changes in v2:
> * Rebase onto next-20220621 to apply on the refactored driver
> * Remove non existant has_phy_com_ctrl and has_lane_rst
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 171 ++++++++++++++++++++++-
> 1 file changed, 169 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index b2cd0cf965d8..b4836417b2c0 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
[skipped]
> @@ -2121,8 +2277,16 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
>
> init.ops = &clk_fixed_rate_ops;
>
> - /* controllers using QMP phys use 125MHz pipe clock interface */
> - fixed->fixed_rate = 125000000;
> + /*
> + * Controllers using QMP PHY-s use 125MHz pipe clock interface
> + * unless other frequency is specified in the DTS.
> + */
> + ret = of_property_read_u32(np, "clock-output-rate", &rate);
The clock-output-rate is a new property, which doesn't exist yet. If
the rate is peculiar to your platform/PHY, I'd suggest adding a field
to the qmp configuration instead.
> + if (ret)
> + fixed->fixed_rate = 125000000;
> + else
> + fixed->fixed_rate = rate;
> +
> fixed->hw.init = &init;
>
> ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> @@ -2255,6 +2419,9 @@ static const struct of_device_id qcom_qmp_phy_pcie_of_match_table[] = {
> }, {
> .compatible = "qcom,ipq8074-qmp-pcie-phy",
> .data = &ipq8074_pciephy_cfg,
> + }, {
> + .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy",
> + .data = &ipq8074_pciephy_gen3_cfg,
> }, {
> .compatible = "qcom,ipq6018-qmp-pcie-phy",
> .data = &ipq6018_pciephy_cfg,
> --
> 2.36.1
>
--
With best wishes
Dmitry
On Tue, 21 Jun 2022 at 19:26, Dmitry Baryshkov
<[email protected]> wrote:
>
> On Tue, 21 Jun 2022 at 14:18, Robert Marko <[email protected]> wrote:
> >
> > IPQ8074 has 2 different single lane PCIe PHY-s, one Gen2 and one Gen3.
> > Gen2 one is already supported, so add the support for the Gen3 one.
> > It uses the same register layout as IPQ6018.
> >
> > Signed-off-by: Robert Marko <[email protected]>
> > ---
> > Changes in v2:
> > * Rebase onto next-20220621 to apply on the refactored driver
> > * Remove non existant has_phy_com_ctrl and has_lane_rst
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 171 ++++++++++++++++++++++-
> > 1 file changed, 169 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> > index b2cd0cf965d8..b4836417b2c0 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>
> [skipped]
>
> > @@ -2121,8 +2277,16 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
> >
> > init.ops = &clk_fixed_rate_ops;
> >
> > - /* controllers using QMP phys use 125MHz pipe clock interface */
> > - fixed->fixed_rate = 125000000;
> > + /*
> > + * Controllers using QMP PHY-s use 125MHz pipe clock interface
> > + * unless other frequency is specified in the DTS.
> > + */
> > + ret = of_property_read_u32(np, "clock-output-rate", &rate);
>
> The clock-output-rate is a new property, which doesn't exist yet. If
> the rate is peculiar to your platform/PHY, I'd suggest adding a field
> to the qmp configuration instead.
Hi,
That sounds like a better idea than adding new DT property, it's
specific only to the Gen3 PHY
for IPQ8074.
I will change it for v3.
Regards,
Robert
>
> > + if (ret)
> > + fixed->fixed_rate = 125000000;
> > + else
> > + fixed->fixed_rate = rate;
> > +
> > fixed->hw.init = &init;
> >
> > ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
> > @@ -2255,6 +2419,9 @@ static const struct of_device_id qcom_qmp_phy_pcie_of_match_table[] = {
> > }, {
> > .compatible = "qcom,ipq8074-qmp-pcie-phy",
> > .data = &ipq8074_pciephy_cfg,
> > + }, {
> > + .compatible = "qcom,ipq8074-qmp-gen3-pcie-phy",
> > + .data = &ipq8074_pciephy_gen3_cfg,
> > }, {
> > .compatible = "qcom,ipq6018-qmp-pcie-phy",
> > .data = &ipq6018_pciephy_cfg,
> > --
> > 2.36.1
> >
>
>
> --
> With best wishes
> Dmitry