This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO
controller via device tree.
Tested on FriendlyARM mini2440, based on s3c2440 SoC.
Changes since v5 (as reported by Arnd Bergmann)
- fix module device table name that was causing an error when building
the driver as a module
Changes since v4 (as suggested by Jaehoon Chung):
- using just a flag as a data structure for the driver to check for
s3c2400 compatibility
Changes since v3 (as suggested by Rob Herring):
- describing properties that wasn't documented and removing unnecessary
comment in the device tree binding
Changes since v2:
- struct "s3cmci_drv_data" and flag "is2440" renamed
- copying the whole driver data struct instead of only its member so
it will be easier to extend the information in the future
- using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties
from device tree
Changes since v1:
- pinctrl description removed from DT binding
- unit and label on DT binding renamed to mmc
Sergio Prado (2):
dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
mmc: host: s3cmci: allow probing from device tree
.../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++
drivers/mmc/host/s3cmci.c | 257 ++++++++++-----------
2 files changed, 168 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
--
1.9.1
Adds the device tree bindings description for Samsung S3C24XX
MMC/SD/SDIO controller, used as a connectivity interface with external
MMC, SD and SDIO storage mediums.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Sergio Prado <[email protected]>
---
.../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
new file mode 100644
index 000000000000..5f68feb9f9d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
@@ -0,0 +1,42 @@
+* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
+
+Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
+with external MMC, SD and SDIO storage mediums.
+
+This file documents differences between the core mmc properties described by
+mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
+implementation.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
+ - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
+ - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
+- reg: register location and length
+- interrupts: mmc controller interrupt
+- clocks: Should reference the controller clock
+- clock-names: Should contain "sdi"
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Optional Properties:
+- bus-width: number of data lines (see mmc.txt)
+- cd-gpios: gpio for card detection (see mmc.txt)
+- wp-gpios: gpio for write protection (see mmc.txt)
+
+Example:
+
+ mmc0: mmc@5a000000 {
+ compatible = "samsung,s3c2440-sdi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdi_pins>;
+ reg = <0x5a000000 0x100000>;
+ interrupts = <0 0 21 3>;
+ clocks = <&clocks PCLK_SDI>;
+ clock-names = "sdi";
+ bus-width = <4>;
+ cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
+ };
--
1.9.1
Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device
tree.
Signed-off-by: Sergio Prado <[email protected]>
---
drivers/mmc/host/s3cmci.c | 257 +++++++++++++++++++++++-----------------------
1 file changed, 126 insertions(+), 131 deletions(-)
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 7a173f8c455b..c101f7e178f7 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -24,6 +24,10 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
#include <plat/gpio-cfg.h>
#include <mach/dma.h>
@@ -807,21 +811,6 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id)
}
-/*
- * ISR for the CardDetect Pin
-*/
-
-static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
-{
- struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
-
- dbg(host, dbg_irq, "card detect\n");
-
- mmc_detect_change(host->mmc, msecs_to_jiffies(500));
-
- return IRQ_HANDLED;
-}
-
static void s3cmci_dma_done_callback(void *arg)
{
struct s3cmci_host *host = arg;
@@ -1177,19 +1166,6 @@ static void s3cmci_send_request(struct mmc_host *mmc)
s3cmci_enable_irq(host, true);
}
-static int s3cmci_card_present(struct mmc_host *mmc)
-{
- struct s3cmci_host *host = mmc_priv(mmc);
- struct s3c24xx_mci_pdata *pdata = host->pdata;
- int ret;
-
- if (pdata->no_detect)
- return -ENOSYS;
-
- ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
- return ret ^ pdata->detect_invert;
-}
-
static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct s3cmci_host *host = mmc_priv(mmc);
@@ -1198,7 +1174,7 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->cmd_is_stop = 0;
host->mrq = mrq;
- if (s3cmci_card_present(mmc) == 0) {
+ if (mmc_gpio_get_cd(mmc) == 0) {
dbg(host, dbg_err, "%s: no medium present\n", __func__);
host->mrq->cmd->error = -ENOMEDIUM;
mmc_request_done(mmc, mrq);
@@ -1242,8 +1218,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_ON:
case MMC_POWER_UP:
/* Configure GPE5...GPE10 pins in SD mode */
- s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
- S3C_GPIO_PULL_NONE);
+ if (!host->pdev->dev.of_node)
+ s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
+ S3C_GPIO_PULL_NONE);
if (host->pdata->set_power)
host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1255,7 +1232,8 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_POWER_OFF:
default:
- gpio_direction_output(S3C2410_GPE(5), 0);
+ if (!host->pdev->dev.of_node)
+ gpio_direction_output(S3C2410_GPE(5), 0);
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
@@ -1295,21 +1273,6 @@ static void s3cmci_reset(struct s3cmci_host *host)
writel(con, host->base + S3C2410_SDICON);
}
-static int s3cmci_get_ro(struct mmc_host *mmc)
-{
- struct s3cmci_host *host = mmc_priv(mmc);
- struct s3c24xx_mci_pdata *pdata = host->pdata;
- int ret;
-
- if (pdata->no_wprotect)
- return 0;
-
- ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0;
- ret ^= pdata->wprotect_invert;
-
- return ret;
-}
-
static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct s3cmci_host *host = mmc_priv(mmc);
@@ -1353,8 +1316,8 @@ static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
static struct mmc_host_ops s3cmci_ops = {
.request = s3cmci_request,
.set_ios = s3cmci_set_ios,
- .get_ro = s3cmci_get_ro,
- .get_cd = s3cmci_card_present,
+ .get_ro = mmc_gpio_get_ro,
+ .get_cd = mmc_gpio_get_cd,
.enable_sdio_irq = s3cmci_enable_sdio_irq,
};
@@ -1545,21 +1508,14 @@ static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
#endif /* CONFIG_DEBUG_FS */
-static int s3cmci_probe(struct platform_device *pdev)
+static int s3cmci_probe_pdata(struct s3cmci_host *host)
{
- struct s3cmci_host *host;
- struct mmc_host *mmc;
- int ret;
- int is2440;
- int i;
+ struct platform_device *pdev = host->pdev;
+ struct mmc_host *mmc = host->mmc;
+ struct s3c24xx_mci_pdata *pdata;
+ int i, ret;
- is2440 = platform_get_device_id(pdev)->driver_data;
-
- mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
- if (!mmc) {
- ret = -ENOMEM;
- goto probe_out;
- }
+ host->is2440 = platform_get_device_id(pdev)->driver_data;
for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
ret = gpio_request(i, dev_name(&pdev->dev));
@@ -1569,25 +1525,101 @@ static int s3cmci_probe(struct platform_device *pdev)
for (i--; i >= S3C2410_GPE(5); i--)
gpio_free(i);
- goto probe_free_host;
+ return ret;
+ }
+ }
+
+ if (!pdev->dev.platform_data)
+ pdev->dev.platform_data = &s3cmci_def_pdata;
+
+ pdata = pdev->dev.platform_data;
+
+ if (pdata->no_wprotect)
+ mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
+
+ if (pdata->no_detect)
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
+ if (pdata->wprotect_invert);
+ mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+
+ if (pdata->detect_invert)
+ mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+
+ if (gpio_is_valid(pdata->gpio_detect)) {
+ ret = mmc_gpio_request_cd(mmc, pdata->gpio_detect, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "error requesting GPIO for CD %d\n",
+ ret);
+ return ret;
}
}
+ if (gpio_is_valid(pdata->gpio_wprotect)) {
+ ret = mmc_gpio_request_ro(mmc, pdata->gpio_wprotect);
+ if (ret) {
+ dev_err(&pdev->dev, "error requesting GPIO for WP %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int s3cmci_probe_dt(struct s3cmci_host *host)
+{
+ struct platform_device *pdev = host->pdev;
+ struct s3c24xx_mci_pdata *pdata;
+ struct mmc_host *mmc = host->mmc;
+ int ret;
+
+ host->is2440 = (int) of_device_get_match_data(&pdev->dev);
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ return ret;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+
+static int s3cmci_probe(struct platform_device *pdev)
+{
+ struct s3cmci_host *host;
+ struct mmc_host *mmc;
+ int ret;
+ int i;
+
+ mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto probe_out;
+ }
+
host = mmc_priv(mmc);
host->mmc = mmc;
host->pdev = pdev;
- host->is2440 = is2440;
+
+ if (pdev->dev.of_node)
+ ret = s3cmci_probe_dt(host);
+ else
+ ret = s3cmci_probe_pdata(host);
+
+ if (ret)
+ goto probe_free_host;
host->pdata = pdev->dev.platform_data;
- if (!host->pdata) {
- pdev->dev.platform_data = &s3cmci_def_pdata;
- host->pdata = &s3cmci_def_pdata;
- }
spin_lock_init(&host->complete_lock);
tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
- if (is2440) {
+ if (host->is2440) {
host->sdiimsk = S3C2440_SDIIMSK;
host->sdidata = S3C2440_SDIDATA;
host->clk_div = 1;
@@ -1645,43 +1677,6 @@ static int s3cmci_probe(struct platform_device *pdev)
disable_irq(host->irq);
host->irq_state = false;
- if (!host->pdata->no_detect) {
- ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
- if (ret) {
- dev_err(&pdev->dev, "failed to get detect gpio\n");
- goto probe_free_irq;
- }
-
- host->irq_cd = gpio_to_irq(host->pdata->gpio_detect);
-
- if (host->irq_cd >= 0) {
- if (request_irq(host->irq_cd, s3cmci_irq_cd,
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- DRIVER_NAME, host)) {
- dev_err(&pdev->dev,
- "can't get card detect irq.\n");
- ret = -ENOENT;
- goto probe_free_gpio_cd;
- }
- } else {
- dev_warn(&pdev->dev,
- "host detect has no irq available\n");
- gpio_direction_input(host->pdata->gpio_detect);
- }
- } else
- host->irq_cd = -1;
-
- if (!host->pdata->no_wprotect) {
- ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
- if (ret) {
- dev_err(&pdev->dev, "failed to get writeprotect\n");
- goto probe_free_irq_cd;
- }
-
- gpio_direction_input(host->pdata->gpio_wprotect);
- }
-
/* Depending on the dma state, get a DMA channel to use. */
if (s3cmci_host_usedma(host)) {
@@ -1689,7 +1684,7 @@ static int s3cmci_probe(struct platform_device *pdev)
ret = PTR_ERR_OR_ZERO(host->dma);
if (ret) {
dev_err(&pdev->dev, "cannot get DMA channel.\n");
- goto probe_free_gpio_wp;
+ goto probe_free_irq;
}
}
@@ -1768,18 +1763,6 @@ static int s3cmci_probe(struct platform_device *pdev)
if (s3cmci_host_usedma(host))
dma_release_channel(host->dma);
- probe_free_gpio_wp:
- if (!host->pdata->no_wprotect)
- gpio_free(host->pdata->gpio_wprotect);
-
- probe_free_gpio_cd:
- if (!host->pdata->no_detect)
- gpio_free(host->pdata->gpio_detect);
-
- probe_free_irq_cd:
- if (host->irq_cd >= 0)
- free_irq(host->irq_cd, host);
-
probe_free_irq:
free_irq(host->irq, host);
@@ -1790,8 +1773,9 @@ static int s3cmci_probe(struct platform_device *pdev)
release_mem_region(host->mem->start, resource_size(host->mem));
probe_free_gpio:
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
+ if (!pdev->dev.of_node)
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+ gpio_free(i);
probe_free_host:
mmc_free_host(mmc);
@@ -1818,7 +1802,6 @@ static int s3cmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
- struct s3c24xx_mci_pdata *pd = host->pdata;
int i;
s3cmci_shutdown(pdev);
@@ -1832,15 +1815,9 @@ static int s3cmci_remove(struct platform_device *pdev)
free_irq(host->irq, host);
- if (!pd->no_wprotect)
- gpio_free(pd->gpio_wprotect);
-
- if (!pd->no_detect)
- gpio_free(pd->gpio_detect);
-
- for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
- gpio_free(i);
-
+ if (!pdev->dev.of_node)
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+ gpio_free(i);
iounmap(host->base);
release_mem_region(host->mem->start, resource_size(host->mem));
@@ -1849,6 +1826,23 @@ static int s3cmci_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id s3cmci_dt_match[] = {
+ {
+ .compatible = "samsung,s3c2410-sdi",
+ .data = (void *)0,
+ },
+ {
+ .compatible = "samsung,s3c2412-sdi",
+ .data = (void *)1,
+ },
+ {
+ .compatible = "samsung,s3c2440-sdi",
+ .data = (void *)1,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, s3cmci_dt_match);
+
static const struct platform_device_id s3cmci_driver_ids[] = {
{
.name = "s3c2410-sdi",
@@ -1868,6 +1862,7 @@ static int s3cmci_remove(struct platform_device *pdev)
static struct platform_driver s3cmci_driver = {
.driver = {
.name = "s3c-sdi",
+ .of_match_table = s3cmci_dt_match,
},
.id_table = s3cmci_driver_ids,
.probe = s3cmci_probe,
--
1.9.1
On 1 April 2017 at 01:50, Sergio Prado <[email protected]> wrote:
> Adds the device tree bindings description for Samsung S3C24XX
> MMC/SD/SDIO controller, used as a connectivity interface with external
> MMC, SD and SDIO storage mediums.
>
> Acked-by: Rob Herring <[email protected]>
> Signed-off-by: Sergio Prado <[email protected]>
Thanks, applied for next!
Kind regards
Uffe
> ---
> .../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> new file mode 100644
> index 000000000000..5f68feb9f9d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
> @@ -0,0 +1,42 @@
> +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
> +
> +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
> +with external MMC, SD and SDIO storage mediums.
> +
> +This file documents differences between the core mmc properties described by
> +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
> +implementation.
> +
> +Required SoC Specific Properties:
> +- compatible: should be one of the following
> + - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
> + - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
> + - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
> +- reg: register location and length
> +- interrupts: mmc controller interrupt
> +- clocks: Should reference the controller clock
> +- clock-names: Should contain "sdi"
> +
> +Required Board Specific Properties:
> +- pinctrl-0: Should specify pin control groups used for this controller.
> +- pinctrl-names: Should contain only one value - "default".
> +
> +Optional Properties:
> +- bus-width: number of data lines (see mmc.txt)
> +- cd-gpios: gpio for card detection (see mmc.txt)
> +- wp-gpios: gpio for write protection (see mmc.txt)
> +
> +Example:
> +
> + mmc0: mmc@5a000000 {
> + compatible = "samsung,s3c2440-sdi";
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdi_pins>;
> + reg = <0x5a000000 0x100000>;
> + interrupts = <0 0 21 3>;
> + clocks = <&clocks PCLK_SDI>;
> + clock-names = "sdi";
> + bus-width = <4>;
> + cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
> + };
> --
> 1.9.1
>
On 1 April 2017 at 01:50, Sergio Prado <[email protected]> wrote:
> Allows configuring Samsung S3C24XX MMC/SD/SDIO controller using a device
> tree.
>
> Signed-off-by: Sergio Prado <[email protected]>
Thanks, applied for next - however, by amending the change with the
fix from Arnd. See more below.
[...]
> +
> + if (pdata->wprotect_invert);
The above semicolon is removed to fix the expression.
> + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
> +
[...]
Kind regards
Uffe