Hi,
Thanks for review feedback from Russell in [1] and [2]. I have changed
the v4 implementation as follow.
v4 changes:
1/5 - Squash v3:1/7 & 2/7 patches into v4:1/6 so that it passes build.
2/5 - [No change] same as v3:3/7
3/5 - [Fix] Fix issues identified by Russell in [1]
4/5 - [Fix] Drop v3:5/7 patch per input by Russell in [2] and make
dwmac-intel clear the ovr_an_inband flag if fixed-link
is used in ACPI _DSD.
5/5 - [No change] same as v3:7/7
The patches are built with C=1 and W=1 and I have found no additional
warn and error from these patches (as advised by Jakub)
The record for v3 changes is in [3]
1/7 - [New] Update xpcs_do_config to accept advertising input
2/7 - [New] Fix to compilation issue introduced v1. Update xpcs_do_config
for sja1105.
3/7 - Same as 3/4 of v1 series.
4/7 - [Fix] Fix numerous issues identified by Russell King.
5/7 - [New] Make fixed-link setting takes precedence over ovr_an_inband.
This is a fix to a bug introduced earlier. Separate patch
will be sent later.
6/7 - [New] Allow phy-mode ACPI _DSD setting for dwmac-intel to overwrite
the phy_interface detected through PCI DevID.
7/7 - [New] Make mdio register flow to skip PHY scanning if fixed-link
is specified.
Reference:
[1] https://patchwork.kernel.org/comment/24890210/
[2] https://patchwork.kernel.org/comment/24890222/
[3] https://patchwork.kernel.org/project/netdevbpf/cover/[email protected]/
Thanks
Boon Leong
Ong Boon Leong (5):
net: make xpcs_do_config to accept advertising for pcs-xpcs and
sja1105
stmmac: intel: prepare to support 1000BASE-X phy interface setting
net: pcs: xpcs: add CL37 1000BASE-X AN support
stmmac: intel: add phy-mode and fixed-link ACPI _DSD setting support
net: stmmac: make mdio register skips PHY scanning for fixed-link
drivers/net/dsa/sja1105/sja1105_main.c | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 30 ++-
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +-
.../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 ++
drivers/net/pcs/pcs-xpcs.c | 178 +++++++++++++++++-
drivers/net/pcs/pcs-xpcs.h | 3 +-
include/linux/pcs/pcs-xpcs.h | 3 +-
7 files changed, 228 insertions(+), 13 deletions(-)
--
2.25.1
For CL37 1000BASE-X AN, DW xPCS does not support C22 method but offers
C45 vendor-specific MII MMD for programming.
We also add the ability to disable Autoneg (through ethtool for certain
network switch that supports 1000BASE-X (1000Mbps and Full-Duplex) but
not Autoneg capability.
v3: Fixes to issues spotted by Russell King. Thanks!
https://patchwork.kernel.org/comment/24890210/
Use phylink_mii_c22_pcs_decode_state(), remove unnecessary
interrupt clearing and skip speed & duplex setting if AN
is enabled.
v2: Fixes to issues spotted by Russell King in v1. Thanks!
https://patchwork.kernel.org/comment/24826650/
Use phylink_mii_c22_pcs_encode_advertisement() and implement
C45 MII ADV handling since IP only support C45 access.
Tested-by: Emilio Riva <[email protected]>
Signed-off-by: Ong Boon Leong <[email protected]>
---
drivers/net/pcs/pcs-xpcs.c | 172 +++++++++++++++++++++++++++++++++++
drivers/net/pcs/pcs-xpcs.h | 3 +-
include/linux/pcs/pcs-xpcs.h | 1 +
3 files changed, 175 insertions(+), 1 deletion(-)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 48d81c40aab..edd0c1e40a7 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -77,6 +77,14 @@ static const int xpcs_sgmii_features[] = {
__ETHTOOL_LINK_MODE_MASK_NBITS,
};
+static const int xpcs_1000basex_features[] = {
+ ETHTOOL_LINK_MODE_Pause_BIT,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ ETHTOOL_LINK_MODE_Autoneg_BIT,
+ ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+ __ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
static const int xpcs_2500basex_features[] = {
ETHTOOL_LINK_MODE_Pause_BIT,
ETHTOOL_LINK_MODE_Asym_Pause_BIT,
@@ -102,6 +110,10 @@ static const phy_interface_t xpcs_sgmii_interfaces[] = {
PHY_INTERFACE_MODE_SGMII,
};
+static const phy_interface_t xpcs_1000basex_interfaces[] = {
+ PHY_INTERFACE_MODE_1000BASEX,
+};
+
static const phy_interface_t xpcs_2500basex_interfaces[] = {
PHY_INTERFACE_MODE_2500BASEX,
PHY_INTERFACE_MODE_MAX,
@@ -112,6 +124,7 @@ enum {
DW_XPCS_10GKR,
DW_XPCS_XLGMII,
DW_XPCS_SGMII,
+ DW_XPCS_1000BASEX,
DW_XPCS_2500BASEX,
DW_XPCS_INTERFACE_MAX,
};
@@ -189,6 +202,16 @@ int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val)
return mdiobus_c45_write(bus, addr, dev, reg, val);
}
+int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg,
+ u16 mask, u16 set)
+{
+ u32 reg_addr = mdiobus_c45_addr(dev, reg);
+ struct mii_bus *bus = xpcs->mdiodev->bus;
+ int addr = xpcs->mdiodev->addr;
+
+ return mdiobus_modify_changed(bus, addr, reg_addr, mask, set);
+}
+
static int xpcs_read_vendor(struct dw_xpcs *xpcs, int dev, u32 reg)
{
return xpcs_read(xpcs, dev, DW_VENDOR | reg);
@@ -237,6 +260,7 @@ static int xpcs_soft_reset(struct dw_xpcs *xpcs,
break;
case DW_AN_C37_SGMII:
case DW_2500BASEX:
+ case DW_AN_C37_1000BASEX:
dev = MDIO_MMD_VEND2;
break;
default:
@@ -772,6 +796,68 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
return ret;
}
+static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs, unsigned int mode,
+ const unsigned long *advertising)
+{
+ phy_interface_t interface = PHY_INTERFACE_MODE_1000BASEX;
+ int ret, mdio_ctrl, adv;
+ bool changed = 0;
+
+ /* According to Chap 7.12, to set 1000BASE-X C37 AN, AN must
+ * be disabled first:-
+ * 1) VR_MII_MMD_CTRL Bit(12)[AN_ENABLE] = 0b
+ * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 00b (1000BASE-X C37)
+ */
+ mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+ if (mdio_ctrl < 0)
+ return mdio_ctrl;
+
+ if (mdio_ctrl & AN_CL37_EN) {
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ mdio_ctrl & ~AN_CL37_EN);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~DW_VR_MII_PCS_MODE_MASK;
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
+ if (ret < 0)
+ return ret;
+
+ /* Check for advertising changes and update the C45 MII ADV
+ * register accordingly.
+ */
+ adv = phylink_mii_c22_pcs_encode_advertisement(interface,
+ advertising);
+ if (adv >= 0) {
+ ret = xpcs_modify_changed(xpcs, MDIO_MMD_VEND2,
+ MII_ADVERTISE, 0xffff, adv);
+ if (ret < 0)
+ return ret;
+
+ changed = ret;
+ }
+
+ /* Clear CL37 AN complete status */
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+ if (ret < 0)
+ return ret;
+
+ if (phylink_autoneg_inband(mode) &&
+ linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) {
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ mdio_ctrl | AN_CL37_EN);
+ if (ret < 0)
+ return ret;
+ }
+
+ return changed;
+}
+
static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
{
int ret;
@@ -817,6 +903,12 @@ int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
if (ret)
return ret;
break;
+ case DW_AN_C37_1000BASEX:
+ ret = xpcs_config_aneg_c37_1000basex(xpcs, mode,
+ advertising);
+ if (ret)
+ return ret;
+ break;
case DW_2500BASEX:
ret = xpcs_config_2500basex(xpcs);
if (ret)
@@ -921,6 +1013,29 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
return 0;
}
+static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
+ struct phylink_link_state *state)
+{
+ int lpa, bmsr;
+
+ if (state->an_enabled) {
+ /* Reset link state */
+ state->link = false;
+
+ lpa = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_LPA);
+ if (lpa < 0 || lpa & LPA_RFAULT)
+ return lpa;
+
+ bmsr = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_BMSR);
+ if (bmsr < 0)
+ return bmsr;
+
+ phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
+ }
+
+ return 0;
+}
+
static void xpcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
@@ -948,6 +1063,13 @@ static void xpcs_get_state(struct phylink_pcs *pcs,
ERR_PTR(ret));
}
break;
+ case DW_AN_C37_1000BASEX:
+ ret = xpcs_get_state_c37_1000basex(xpcs, state);
+ if (ret) {
+ pr_err("xpcs_get_state_c37_1000basex returned %pe\n",
+ ERR_PTR(ret));
+ }
+ break;
default:
return;
}
@@ -983,6 +1105,35 @@ static void xpcs_link_up_sgmii(struct dw_xpcs *xpcs, unsigned int mode,
pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
}
+static void xpcs_link_up_1000basex(struct dw_xpcs *xpcs, unsigned int mode,
+ int speed, int duplex)
+{
+ int val, ret;
+
+ if (phylink_autoneg_inband(mode))
+ return;
+
+ switch (speed) {
+ case SPEED_1000:
+ val = BMCR_SPEED1000;
+ break;
+ case SPEED_100:
+ case SPEED_10:
+ default:
+ pr_err("%s: speed = %d\n", __func__, speed);
+ return;
+ }
+
+ if (duplex == DUPLEX_FULL)
+ val |= BMCR_FULLDPLX;
+ else
+ pr_err("%s: half duplex not supported\n", __func__);
+
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val);
+ if (ret)
+ pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
+}
+
void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex)
{
@@ -992,9 +1143,23 @@ void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
return xpcs_config_usxgmii(xpcs, speed);
if (interface == PHY_INTERFACE_MODE_SGMII)
return xpcs_link_up_sgmii(xpcs, mode, speed, duplex);
+ if (interface == PHY_INTERFACE_MODE_1000BASEX)
+ return xpcs_link_up_1000basex(xpcs, mode, speed, duplex);
}
EXPORT_SYMBOL_GPL(xpcs_link_up);
+static void xpcs_an_restart(struct phylink_pcs *pcs)
+{
+ struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+ int ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+ if (ret >= 0) {
+ ret |= BMCR_ANRESTART;
+ xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret);
+ }
+}
+
static u32 xpcs_get_id(struct dw_xpcs *xpcs)
{
int ret;
@@ -1060,6 +1225,12 @@ static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
.num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces),
.an_mode = DW_AN_C37_SGMII,
},
+ [DW_XPCS_1000BASEX] = {
+ .supported = xpcs_1000basex_features,
+ .interface = xpcs_1000basex_interfaces,
+ .num_interfaces = ARRAY_SIZE(xpcs_1000basex_interfaces),
+ .an_mode = DW_AN_C37_1000BASEX,
+ },
[DW_XPCS_2500BASEX] = {
.supported = xpcs_2500basex_features,
.interface = xpcs_2500basex_interfaces,
@@ -1115,6 +1286,7 @@ static const struct phylink_pcs_ops xpcs_phylink_ops = {
.pcs_validate = xpcs_validate,
.pcs_config = xpcs_config,
.pcs_get_state = xpcs_get_state,
+ .pcs_an_restart = xpcs_an_restart,
.pcs_link_up = xpcs_link_up,
};
diff --git a/drivers/net/pcs/pcs-xpcs.h b/drivers/net/pcs/pcs-xpcs.h
index 35651d32a22..5164f2e9584 100644
--- a/drivers/net/pcs/pcs-xpcs.h
+++ b/drivers/net/pcs/pcs-xpcs.h
@@ -109,7 +109,8 @@
int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg);
int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val);
-
+int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg,
+ u16 mask, u16 set);
int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs);
int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs);
int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs);
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index 37eb97cc228..d2da1e0b4a9 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -17,6 +17,7 @@
#define DW_AN_C73 1
#define DW_AN_C37_SGMII 2
#define DW_2500BASEX 3
+#define DW_AN_C37_1000BASEX 4
struct xpcs_id;
--
2.25.1
stmmac_mdio_register() lacks fixed-link consideration and only skip PHY
scanning if it has done DT style PHY discovery. So, for DT or ACPI _DSD
setting of fixed-link, the PHY scanning should not happen.
Tested-by: Emilio Riva <[email protected]>
Signed-off-by: Ong Boon Leong <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 ++++++-----
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 ++++++++++++++
2 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 73cae2938f6..bc8edd88175 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1141,19 +1141,20 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
*/
static int stmmac_init_phy(struct net_device *dev)
{
+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
struct stmmac_priv *priv = netdev_priv(dev);
- struct device_node *node;
int ret;
- node = priv->plat->phylink_node;
+ if (!fwnode)
+ fwnode = dev_fwnode(priv->device);
- if (node)
- ret = phylink_of_phy_connect(priv->phylink, node, 0);
+ if (fwnode)
+ ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
/* Some DT bindings do not set-up the PHY handle. Let's try to
* manually parse it
*/
- if (!node || ret) {
+ if (!fwnode || ret) {
int addr = priv->plat->phy_addr;
struct phy_device *phydev;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 03d3d1f7aa4..5f177ea8072 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -434,9 +434,11 @@ int stmmac_mdio_register(struct net_device *ndev)
int err = 0;
struct mii_bus *new_bus;
struct stmmac_priv *priv = netdev_priv(ndev);
+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
struct device_node *mdio_node = priv->plat->mdio_node;
struct device *dev = ndev->dev.parent;
+ struct fwnode_handle *fixed_node;
int addr, found, max_addr;
if (!mdio_bus_data)
@@ -490,6 +492,18 @@ int stmmac_mdio_register(struct net_device *ndev)
if (priv->plat->has_xgmac)
stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
+ /* If fixed-link is set, skip PHY scanning */
+ if (!fwnode)
+ fwnode = dev_fwnode(priv->device);
+
+ if (fwnode) {
+ fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
+ if (fixed_node) {
+ fwnode_handle_put(fixed_node);
+ goto bus_register_done;
+ }
+ }
+
if (priv->plat->phy_node || mdio_node)
goto bus_register_done;
--
2.25.1
xpcs_config() has 'advertising' input that is required for C37 1000BASE-X
AN in later patch series. So, we prepare xpcs_do_config() for it.
For sja1105, xpcs_do_config() is used for xpcs configuration without
depending on advertising input, so set to NULL.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Ong Boon Leong <[email protected]>
---
drivers/net/dsa/sja1105/sja1105_main.c | 2 +-
drivers/net/pcs/pcs-xpcs.c | 6 +++---
include/linux/pcs/pcs-xpcs.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 72b6fc1932b..b253e27bcfb 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2330,7 +2330,7 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
else
mode = MLO_AN_PHY;
- rc = xpcs_do_config(xpcs, priv->phy_mode[i], mode);
+ rc = xpcs_do_config(xpcs, priv->phy_mode[i], mode, NULL);
if (rc < 0)
goto out;
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 4cfd05c15ae..48d81c40aab 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -795,7 +795,7 @@ static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
}
int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
- unsigned int mode)
+ unsigned int mode, const unsigned long *advertising)
{
const struct xpcs_compat *compat;
int ret;
@@ -843,7 +843,7 @@ static int xpcs_config(struct phylink_pcs *pcs, unsigned int mode,
{
struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
- return xpcs_do_config(xpcs, interface, mode);
+ return xpcs_do_config(xpcs, interface, mode, advertising);
}
static int xpcs_get_state_c73(struct dw_xpcs *xpcs,
@@ -864,7 +864,7 @@ static int xpcs_get_state_c73(struct dw_xpcs *xpcs,
state->link = 0;
- return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND);
+ return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND, NULL);
}
if (state->an_enabled && xpcs_aneg_done_c73(xpcs, state, compat)) {
diff --git a/include/linux/pcs/pcs-xpcs.h b/include/linux/pcs/pcs-xpcs.h
index 266eb26fb02..37eb97cc228 100644
--- a/include/linux/pcs/pcs-xpcs.h
+++ b/include/linux/pcs/pcs-xpcs.h
@@ -30,7 +30,7 @@ int xpcs_get_an_mode(struct dw_xpcs *xpcs, phy_interface_t interface);
void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed, int duplex);
int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
- unsigned int mode);
+ unsigned int mode, const unsigned long *advertising);
void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces);
int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns,
int enable);
--
2.25.1
>diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>index 73cae2938f6..bc8edd88175 100644
>--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>@@ -1141,19 +1141,20 @@ static void stmmac_check_pcs_mode(struct
>stmmac_priv *priv)
> */
> static int stmmac_init_phy(struct net_device *dev)
> {
>+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat-
>>phylink_node);
This is an obvious mistake and will be fixed in next revision.
> struct stmmac_priv *priv = netdev_priv(dev);
>- struct device_node *node;
> int ret;
>
>- node = priv->plat->phylink_node;
>+ if (!fwnode)
>+ fwnode = dev_fwnode(priv->device);
>
>- if (node)
>- ret = phylink_of_phy_connect(priv->phylink, node, 0);
>+ if (fwnode)
>+ ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
>
> /* Some DT bindings do not set-up the PHY handle. Let's try to
> * manually parse it
> */
>- if (!node || ret) {
>+ if (!fwnode || ret) {
> int addr = priv->plat->phy_addr;
> struct phy_device *phydev;
>
>diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>index 03d3d1f7aa4..5f177ea8072 100644
>--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
>@@ -434,9 +434,11 @@ int stmmac_mdio_register(struct net_device *ndev)
> int err = 0;
> struct mii_bus *new_bus;
> struct stmmac_priv *priv = netdev_priv(ndev);
>+ struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat-
>>phylink_node);
> struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat-
>>mdio_bus_data;
> struct device_node *mdio_node = priv->plat->mdio_node;
> struct device *dev = ndev->dev.parent;
>+ struct fwnode_handle *fixed_node;
> int addr, found, max_addr;
>
> if (!mdio_bus_data)
>@@ -490,6 +492,18 @@ int stmmac_mdio_register(struct net_device *ndev)
> if (priv->plat->has_xgmac)
> stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
>
>+ /* If fixed-link is set, skip PHY scanning */
>+ if (!fwnode)
>+ fwnode = dev_fwnode(priv->device);
>+
>+ if (fwnode) {
>+ fixed_node = fwnode_get_named_child_node(fwnode, "fixed-
>link");
>+ if (fixed_node) {
>+ fwnode_handle_put(fixed_node);
>+ goto bus_register_done;
>+ }
>+ }
>+
> if (priv->plat->phy_node || mdio_node)
> goto bus_register_done;
>
>--
>2.25.1
On Tue, Jun 14, 2022 at 11:00:28AM +0800, Ong Boon Leong wrote:
> +int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg,
> + u16 mask, u16 set)
Why is this globally visible? I can find no reason for it in this patch
set.
> +{
> + u32 reg_addr = mdiobus_c45_addr(dev, reg);
> + struct mii_bus *bus = xpcs->mdiodev->bus;
> + int addr = xpcs->mdiodev->addr;
> +
> + return mdiobus_modify_changed(bus, addr, reg_addr, mask, set);
There is a mdiodev_modify_changed() which would be slightly cleaner
here.
Thanks!
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
>On Tue, Jun 14, 2022 at 11:00:28AM +0800, Ong Boon Leong wrote:
>> +int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg,
>> + u16 mask, u16 set)
>
>Why is this globally visible? I can find no reason for it in this patch
>set.
Ok. I will make it private.
>
>> +{
>> + u32 reg_addr = mdiobus_c45_addr(dev, reg);
>> + struct mii_bus *bus = xpcs->mdiodev->bus;
>> + int addr = xpcs->mdiodev->addr;
>> +
>> + return mdiobus_modify_changed(bus, addr, reg_addr, mask, set);
>
>There is a mdiodev_modify_changed() which would be slightly cleaner
>here.
>
Interesting. I could also add another patch to make the same change to
xpcs_read() and xpcs_write(). Ok?