From: Arnd Bergmann <[email protected]>
Kbuild does not support having a source file compiled multiple times
and linked into distinct modules, or built-in and modular at the
same time. For fs-edma, there are two common components that are
linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
module on Coldfire. This violates the rule for compile-testing:
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
I tried splitting out the common parts into a separate modules, but
that adds back the complexity that a cleanup patch removed, and it
gets harder with the addition of the tracepoints.
As a minimal workaround, address it at the Kconfig level, by disallowing
the broken configurations.
Link: https://lore.kernel.org/lkml/[email protected]/
Fixes: 66aac8ea0a6c ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c")
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/dma/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 965fa49668ff..b3873d01a2ab 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -394,7 +394,7 @@ config LS2X_APB_DMA
config MCF_EDMA
tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
- depends on M5441x || COMPILE_TEST
+ depends on M5441x || (COMPILE_TEST && FSL_EDMA=n)
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
--
2.39.2
> Subject: [PATCH] dmaengine: fsl-edma: avoid linking both modules
>
> From: Arnd Bergmann <[email protected]>
>
> Kbuild does not support having a source file compiled multiple times and
> linked into distinct modules, or built-in and modular at the same time. For fs-
> edma, there are two common components that are linked into the fsl-
> edma.ko for Arm and PowerPC, plus the mcf-edma.ko module on Coldfire.
> This violates the rule for compile-testing:
>
> scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is
> added to multiple modules: fsl-edma mcf-edma
> scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added
> to multiple modules: fsl-edma mcf-edma
>
> I tried splitting out the common parts into a separate modules, but that adds
> back the complexity that a cleanup patch removed, and it gets harder with
> the addition of the tracepoints.
>
> As a minimal workaround, address it at the Kconfig level, by disallowing the
> broken configurations.
>
> Link:
> https://lore.ke/
> rnel.org%2Flkml%2F20240110232255.1099757-1-
> arnd%40kernel.org%2F&data=05%7C02%7Cpeng.fan%40nxp.com%7Cfb9b0e
> 6533054fee3d0d08dc7f0cfbe4%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C638524940949353893%7CUnknown%7CTWFpbGZsb3d8eyJWIj
> oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0
> %7C%7C%7C&sdata=88jDqMK7okvOsZaMXT02p7coSRTr2r%2FArF1rbAp9P4
> w%3D&reserved=0
> Fixes: 66aac8ea0a6c ("dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL
> in fsl-edma-common.c")
> Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Peng Fan <[email protected]>
> ---
> drivers/dma/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index
> 965fa49668ff..b3873d01a2ab 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -394,7 +394,7 @@ config LS2X_APB_DMA
>
> config MCF_EDMA
> tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
> - depends on M5441x || COMPILE_TEST
> + depends on M5441x || (COMPILE_TEST && FSL_EDMA=n)
> select DMA_ENGINE
> select DMA_VIRTUAL_CHANNELS
> help
> --
> 2.39.2
On Tue, 28 May 2024 13:54:22 +0200, Arnd Bergmann wrote:
> Kbuild does not support having a source file compiled multiple times
> and linked into distinct modules, or built-in and modular at the
> same time. For fs-edma, there are two common components that are
> linked into the fsl-edma.ko for Arm and PowerPC, plus the mcf-edma.ko
> module on Coldfire. This violates the rule for compile-testing:
>
> scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-common.o is added to multiple modules: fsl-edma mcf-edma
> scripts/Makefile.build:236: drivers/dma/Makefile: fsl-edma-trace.o is added to multiple modules: fsl-edma mcf-edma
>
> [...]
Applied, thanks!
[1/1] dmaengine: fsl-edma: avoid linking both modules
commit: fa555b5026d0bf1ba7c9e645ff75e2725a982631
Best regards,
--
Vinod Koul <[email protected]>