2021-02-12 01:39:31

by Min Li

[permalink] [raw]
Subject: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

From: Min Li <[email protected]>

This driver supports 1588 related functions of ClockMatrix(TM)
and 82P33xxx families of timing and synchronization devices.

The driver is developed to be only used by Renesas PTP Clock
Manager for Linux (pcm4l) software. It supports 1588/PTP
releated functionalities that specific to Renesas devices
but are not supported by general PHC framework. So pcm4l
will use both the existing PHC driver and this module to
complete 1588/PTP support. The supported functons are:

-set combomode
-get dpll's state
-get dpll's ffo

This driver must work with Renesas MFD driver to access SMU
through I2C/SPI.

Changes since v1:
-Provide more background for purpose of the change.
-Provide compat_ioctl support
-Fix ioctl cmd definition

Signed-off-by: Min Li <[email protected]>
---
drivers/misc/Kconfig | 13 ++
drivers/misc/Makefile | 3 +
drivers/misc/rsmu_cdev.c | 449 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/misc/rsmu_cdev.h | 75 ++++++++
drivers/misc/rsmu_cm.c | 214 ++++++++++++++++++++++
drivers/misc/rsmu_sabre.c | 153 ++++++++++++++++
include/uapi/linux/rsmu.h | 61 +++++++
7 files changed, 968 insertions(+)
create mode 100644 drivers/misc/rsmu_cdev.c
create mode 100644 drivers/misc/rsmu_cdev.h
create mode 100644 drivers/misc/rsmu_cm.c
create mode 100644 drivers/misc/rsmu_sabre.c
create mode 100644 include/uapi/linux/rsmu.h

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index fafa8b0..70144f3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -466,6 +466,19 @@ config HISI_HIKEY_USB
switching between the dual-role USB-C port and the USB-A host ports
using only one USB controller.

+config RSMU
+ tristate "Renesas Synchronization Management Unit (SMU)"
+ depends on MFD_RSMU_I2C || MFD_RSMU_SPI
+ help
+ This option enables support for Renesas SMU, such as Clockmatrix and
+ 82P33XXX series. The driver is developed to be only used by Renesas
+ PTP Clock Manager for Linux (pcm4l) software. It supports 1588/PTP
+ releated functionalities that specific to Renesas devices but are not
+ supported by general PHC framework. So pcm4l will use both the
+ existing PHC driver and this module to complete 1588/PTP support.
+ This driver must work with Renesas MFD driver to access SMU
+ through I2C/SPI.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d23231e..3054c0d 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,3 +57,6 @@ obj-$(CONFIG_HABANA_AI) += habanalabs/
obj-$(CONFIG_UACCE) += uacce/
obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o
+
+rsmu-objs := rsmu_cdev.o rsmu_cm.o rsmu_sabre.o
+obj-$(CONFIG_RSMU) += rsmu.o
diff --git a/drivers/misc/rsmu_cdev.c b/drivers/misc/rsmu_cdev.c
new file mode 100644
index 0000000..4af3e3d
--- /dev/null
+++ b/drivers/misc/rsmu_cdev.c
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This driver is developed for the IDT ClockMatrix(TM) and 82P33xxx families of
+ * timing and synchronization devices. It exposes rsmu interface in sysfs and
+ * supports file operations like open(), close() and ioctl().
+ *
+ * This driver is developed to be only used by Renesas PTP Clock Manager for
+ * Linux (pcm4l) software.
+ *
+ * This driver supports 1588/PTP releated functionalities that
+ * specific to Renesas devices but are not supported by general PHC framework.
+ * So pcm4l will use both the existing PHC driver and this driver to complete
+ * 1588/PTP support.
+ *
+ * This driver must work with Renesas MFD driver to access SMU through
+ * I2C/SPI. Also, the MFD driver is responsible for creating platform device
+ * and invoking this driver to run.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/rsmu.h>
+#include <uapi/linux/rsmu.h>
+
+#include "rsmu_cdev.h"
+
+#define DRIVER_NAME "rsmu"
+#define DRIVER_MAX_DEV BIT(MINORBITS)
+
+static struct class *rsmu_class;
+static dev_t rsmu_cdevt;
+static u8 scsr_page;
+
+static int
+rsmu_set_combomode(struct rsmu_cdev *rsmu, void __user *arg)
+{
+ struct rsmu_combomode mode;
+ int err;
+
+ if (copy_from_user(&mode, arg, sizeof(mode)))
+ return -EFAULT;
+
+ mutex_lock(rsmu->lock);
+ switch (rsmu->type) {
+ case RSMU_CM:
+ err = rsmu_cm_set_combomode(rsmu, mode.dpll, mode.mode);
+ break;
+ case RSMU_SABRE:
+ err = rsmu_sabre_set_combomode(rsmu, mode.dpll, mode.mode);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ mutex_unlock(rsmu->lock);
+
+ return err;
+}
+
+static int
+rsmu_get_dpll_state(struct rsmu_cdev *rsmu, void __user *arg)
+{
+ struct rsmu_get_state state_request;
+ u8 state;
+ int err;
+
+ if (copy_from_user(&state_request, arg, sizeof(state_request)))
+ return -EFAULT;
+
+ mutex_lock(rsmu->lock);
+ switch (rsmu->type) {
+ case RSMU_CM:
+ err = rsmu_cm_get_dpll_state(rsmu, state_request.dpll, &state);
+ break;
+ case RSMU_SABRE:
+ err = rsmu_sabre_get_dpll_state(rsmu, state_request.dpll,
+ &state);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ mutex_unlock(rsmu->lock);
+
+ state_request.state = state;
+ if (copy_to_user(arg, &state_request, sizeof(state_request)))
+ return -EFAULT;
+
+ return err;
+}
+
+static int
+rsmu_get_dpll_ffo(struct rsmu_cdev *rsmu, void __user *arg)
+{
+ struct rsmu_get_ffo ffo_request;
+ int err;
+
+ if (copy_from_user(&ffo_request, arg, sizeof(ffo_request)))
+ return -EFAULT;
+
+ mutex_lock(rsmu->lock);
+ switch (rsmu->type) {
+ case RSMU_CM:
+ err = rsmu_cm_get_dpll_ffo(rsmu, ffo_request.dpll,
+ &ffo_request);
+ break;
+ case RSMU_SABRE:
+ err = rsmu_sabre_get_dpll_ffo(rsmu, ffo_request.dpll,
+ &ffo_request);
+ break;
+ default:
+ err = -EINVAL;
+ }
+ mutex_unlock(rsmu->lock);
+
+ if (copy_to_user(arg, &ffo_request, sizeof(ffo_request)))
+ return -EFAULT;
+
+ return err;
+}
+
+static ssize_t scsr_show_regs_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ struct rsmu_cdev *rsmu = dev_get_drvdata(dev);
+ char *fmt = "%04x:%02x %02x %02x %02x %02x %02x %02x %02x\n";
+ int cnt = 0;
+ u8 regs[256];
+ u16 start;
+ int rows;
+ int row;
+ int err;
+
+ mutex_lock(rsmu->lock);
+ if (rsmu->type == RSMU_CM) {
+ rows = 32;
+ start = 0xc000 + ((u16)scsr_page << 8);
+ if (scsr_page >= 16)
+ err = -EINVAL;
+ else
+ err = rsmu_read(rsmu->mfd, start, regs, 256);
+ } else if (rsmu->type == RSMU_SABRE) {
+ rows = 16;
+ start = (u16)scsr_page << 7;
+ if (scsr_page >= 7)
+ err = -EINVAL;
+ else
+ err = rsmu_read(rsmu->mfd, start, regs, 128);
+
+ } else
+ err = -EINVAL;
+ mutex_unlock(rsmu->lock);
+
+ if (err)
+ return err;
+
+ for (row = 0; row < rows; row++) {
+ u8 index = row * 8;
+
+ cnt += snprintf(page + cnt, PAGE_SIZE - cnt - 1, fmt,
+ start + index, regs[index], regs[index + 1],
+ regs[index + 2], regs[index + 3],
+ regs[index + 4], regs[index + 5],
+ regs[index + 6], regs[index + 7]);
+ }
+
+ return cnt;
+}
+static DEVICE_ATTR_RO(scsr_show_regs);
+
+static ssize_t scsr_set_page_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rsmu_cdev *rsmu = dev_get_drvdata(dev);
+ u8 page;
+ u8 max;
+
+ if (kstrtou8(buf, 10, &page) < 0)
+ return -EINVAL;
+
+ if (rsmu->type == RSMU_CM)
+ max = 16;
+ else if (rsmu->type == RSMU_SABRE)
+ max = 7;
+ else
+ return -EINVAL;
+
+ if (page >= max)
+ return -EINVAL;
+
+ mutex_lock(rsmu->lock);
+ scsr_page = page;
+ mutex_unlock(rsmu->lock);
+
+ return count;
+}
+static DEVICE_ATTR_WO(scsr_set_page);
+
+static struct attribute *rsmu_attrs[] = {
+ &dev_attr_scsr_set_page.attr,
+ &dev_attr_scsr_show_regs.attr,
+ NULL
+};
+
+static const struct attribute_group rsmu_group = {
+ .attrs = rsmu_attrs
+};
+
+static int
+rsmu_open(struct inode *iptr, struct file *fptr)
+{
+ struct rsmu_cdev *rsmu;
+
+ rsmu = container_of(iptr->i_cdev, struct rsmu_cdev, rsmu_cdev);
+ if (!rsmu)
+ return -EAGAIN;
+
+ /* Only one open per device at a time */
+ if (!atomic_dec_and_test(&rsmu->open_count)) {
+ atomic_inc(&rsmu->open_count);
+ return -EBUSY;
+ }
+
+ fptr->private_data = rsmu;
+ return 0;
+}
+
+static int
+rsmu_release(struct inode *iptr, struct file *fptr)
+{
+ struct rsmu_cdev *rsmu;
+
+ rsmu = container_of(iptr->i_cdev, struct rsmu_cdev, rsmu_cdev);
+ if (!rsmu)
+ return -EAGAIN;
+
+ atomic_inc(&rsmu->open_count);
+ return 0;
+}
+
+static long
+rsmu_ioctl(struct file *fptr, unsigned int cmd, unsigned long data)
+{
+ struct rsmu_cdev *rsmu = fptr->private_data;
+ void __user *arg = (void __user *)data;
+ int err = 0;
+
+ if (!rsmu)
+ return -EINVAL;
+
+ switch (cmd) {
+ case RSMU_SET_COMBOMODE:
+ err = rsmu_set_combomode(rsmu, arg);
+ break;
+ case RSMU_GET_STATE:
+ err = rsmu_get_dpll_state(rsmu, arg);
+ break;
+ case RSMU_GET_FFO:
+ err = rsmu_get_dpll_ffo(rsmu, arg);
+ break;
+ default:
+ /* Should not get here */
+ dev_err(rsmu->dev, "Undefined RSMU IOCTL");
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static long rsmu_compat_ioctl(struct file *fptr, unsigned int cmd,
+ unsigned long data)
+{
+ return rsmu_ioctl(fptr, cmd, data);
+}
+
+static const struct file_operations rsmu_fops = {
+ .owner = THIS_MODULE,
+ .open = rsmu_open,
+ .release = rsmu_release,
+ .unlocked_ioctl = rsmu_ioctl,
+ .compat_ioctl = rsmu_compat_ioctl,
+};
+
+static int
+rsmu_probe(struct platform_device *pdev)
+{
+ struct rsmu_pdata *pdata = dev_get_platdata(&pdev->dev);
+ struct rsmu_cdev *rsmu;
+ struct device *rsmu_cdev;
+ int err;
+
+ rsmu = devm_kzalloc(&pdev->dev, sizeof(*rsmu), GFP_KERNEL);
+ if (!rsmu)
+ return -ENOMEM;
+
+ rsmu->dev = &pdev->dev;
+ rsmu->mfd = pdev->dev.parent;
+ rsmu->type = pdata->type;
+ rsmu->lock = pdata->lock;
+ rsmu->index = pdata->index;
+
+ /* Save driver private data */
+ platform_set_drvdata(pdev, rsmu);
+
+ cdev_init(&rsmu->rsmu_cdev, &rsmu_fops);
+ rsmu->rsmu_cdev.owner = THIS_MODULE;
+ err = cdev_add(&rsmu->rsmu_cdev,
+ MKDEV(MAJOR(rsmu_cdevt), 0), 1);
+ if (err < 0) {
+ dev_err(rsmu->dev, "cdev_add failed");
+ err = -EIO;
+ goto err_rsmu_dev;
+ }
+
+ if (!rsmu_class) {
+ err = -EIO;
+ dev_err(rsmu->dev, "rsmu class not created correctly");
+ goto err_rsmu_cdev;
+ }
+
+ rsmu_cdev = device_create(rsmu_class, rsmu->dev,
+ MKDEV(MAJOR(rsmu_cdevt), 0),
+ rsmu, "rsmu%d", rsmu->index);
+ if (IS_ERR(rsmu_cdev)) {
+ dev_err(rsmu->dev, "unable to create char device");
+ err = PTR_ERR(rsmu_cdev);
+ goto err_rsmu_cdev;
+ }
+
+ err = sysfs_create_group(&rsmu_cdev->kobj, &rsmu_group);
+ if (err) {
+ dev_err(rsmu->dev, "sysfs_create_group failed\n");
+ goto err_rsmu_cdev;
+ }
+
+ atomic_set(&rsmu->open_count, 1);
+ dev_info(rsmu->dev, "Probe SMU type %d Successful\n", rsmu->type);
+ return 0;
+
+ /* Failure cleanup */
+err_rsmu_cdev:
+ cdev_del(&rsmu->rsmu_cdev);
+err_rsmu_dev:
+ return err;
+}
+
+static int
+rsmu_remove(struct platform_device *pdev)
+{
+ struct rsmu_cdev *rsmu;
+ struct device *dev = &pdev->dev;
+
+ rsmu = platform_get_drvdata(pdev);
+ if (!rsmu)
+ return -ENODEV;
+
+ if (!rsmu_class) {
+ dev_err(dev, "rsmu_class is NULL");
+ return -EIO;
+ }
+
+ device_destroy(rsmu_class, MKDEV(MAJOR(rsmu_cdevt), 0));
+ cdev_del(&rsmu->rsmu_cdev);
+
+ return 0;
+}
+
+static const struct platform_device_id rsmu_id_table[] = {
+ { "rsmu-cdev0", },
+ { "rsmu-cdev1", },
+ { "rsmu-cdev2", },
+ { "rsmu-cdev3", },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, rsmu_id_table);
+
+static const struct of_device_id rsmu_of_match[] = {
+ { .compatible = "renesas,rsmu-cdev0", },
+ { .compatible = "renesas,rsmu-cdev1", },
+ { .compatible = "renesas,rsmu-cdev2", },
+ { .compatible = "renesas,rsmu-cdev3", },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, rsmu_of_match);
+
+static struct platform_driver rsmu_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = rsmu_of_match,
+ },
+ .probe = rsmu_probe,
+ .remove = rsmu_remove,
+ .id_table = rsmu_id_table,
+};
+
+static int __init rsmu_init(void)
+{
+ int err;
+
+ rsmu_class = class_create(THIS_MODULE, DRIVER_NAME);
+ if (IS_ERR(rsmu_class)) {
+ err = PTR_ERR(rsmu_class);
+ pr_err("%s : Unable to register rsmu class", __func__);
+ return err;
+ }
+
+ err = alloc_chrdev_region(&rsmu_cdevt, 0, DRIVER_MAX_DEV, DRIVER_NAME);
+ if (err < 0) {
+ pr_err("%s : Unable to get major number", __func__);
+ goto err_rsmu_class;
+ }
+
+ err = platform_driver_register(&rsmu_driver);
+ if (err < 0) {
+ pr_err("%s Unabled to register %s driver",
+ __func__, DRIVER_NAME);
+ goto err_rsmu_drv;
+ }
+ return 0;
+
+ /* Error Path */
+err_rsmu_drv:
+ unregister_chrdev_region(rsmu_cdevt, DRIVER_MAX_DEV);
+err_rsmu_class:
+ class_destroy(rsmu_class);
+ return err;
+}
+
+static void __exit rsmu_exit(void)
+{
+ platform_driver_unregister(&rsmu_driver);
+ unregister_chrdev_region(rsmu_cdevt, DRIVER_MAX_DEV);
+ class_destroy(rsmu_class);
+ rsmu_class = NULL;
+}
+
+module_init(rsmu_init);
+module_exit(rsmu_exit);
+
+MODULE_DESCRIPTION("Renesas SMU character device driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/rsmu_cdev.h b/drivers/misc/rsmu_cdev.h
new file mode 100644
index 0000000..4b38790a
--- /dev/null
+++ b/drivers/misc/rsmu_cdev.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This driver is developed for the IDT ClockMatrix(TM) of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#ifndef __LINUX_RSMU_CDEV_H
+#define __LINUX_RSMU_CDEV_H
+
+#include <linux/cdev.h>
+
+/**
+ * struct rsmu_cdev - Driver data for RSMU character device
+ * @dev: pointer to platform device
+ * @mfd: pointer to MFD device
+ * @open_count: Count of char device being opened
+ * @rsmu_cdev: Character device handle
+ * @lock: Mutex to protect operations from being interrupted
+ */
+struct rsmu_cdev {
+ struct device *dev;
+ struct device *mfd;
+ struct cdev rsmu_cdev;
+ struct mutex *lock;
+ enum rsmu_type type;
+ atomic_t open_count;
+ u8 index;
+};
+
+/**
+ * Enumerated type listing DPLL combination modes
+ */
+enum rsmu_dpll_combomode {
+ E_COMBOMODE_CURRENT = 0,
+ E_COMBOMODE_FASTAVG,
+ E_COMBOMODE_SLOWAVG,
+ E_COMBOMODE_HOLDOVER,
+ E_COMBOMODE_MAX,
+};
+
+/**
+ * An id used to identify the respective child class states.
+ */
+enum rsmu_class_state {
+ E_SRVLOINITIALSTATE = 0,
+ E_SRVLOUNQUALIFIEDSTATE = 1,
+ E_SRVLOLOCKACQSTATE = 2,
+ E_SRVLOFREQUENCYLOCKEDSTATE = 3,
+ E_SRVLOTIMELOCKEDSTATE = 4,
+ E_SRVLOHOLDOVERINSPECSTATE = 5,
+ E_SRVLOHOLDOVEROUTOFSPECSTATE = 6,
+ E_SRVLOFREERUNSTATE = 7,
+ E_SRVNUMBERLOSTATES = 8,
+ E_SRVLOSTATEINVALID = 9
+};
+
+extern int
+rsmu_cm_set_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 mode);
+extern int
+rsmu_cm_get_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 *mode);
+extern int
+rsmu_cm_get_dpll_state(struct rsmu_cdev *rsmu, u8 dpll, u8 *state);
+extern int
+rsmu_cm_get_dpll_ffo(struct rsmu_cdev *rsmu, u8 dpll, struct rsmu_get_ffo *ffo);
+extern int
+rsmu_sabre_set_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 mode);
+extern int
+rsmu_sabre_get_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 *mode);
+extern int
+rsmu_sabre_get_dpll_state(struct rsmu_cdev *rsmu, u8 dpll, u8 *state);
+extern int
+rsmu_sabre_get_dpll_ffo(struct rsmu_cdev *rsmu, u8 dpll,
+ struct rsmu_get_ffo *ffo);
+#endif
diff --git a/drivers/misc/rsmu_cm.c b/drivers/misc/rsmu_cm.c
new file mode 100644
index 0000000..26779e6
--- /dev/null
+++ b/drivers/misc/rsmu_cm.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This driver is developed for the IDT ClockMatrix(TM) of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/mfd/idt8a340_reg.h>
+#include <linux/mfd/rsmu.h>
+#include <uapi/linux/rsmu.h>
+
+#include "rsmu_cdev.h"
+
+int rsmu_cm_set_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 mode)
+{
+ u16 dpll_ctrl_n;
+ u8 cfg;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_ctrl_n = DPLL_CTRL_0;
+ break;
+ case 1:
+ dpll_ctrl_n = DPLL_CTRL_1;
+ break;
+ case 2:
+ dpll_ctrl_n = DPLL_CTRL_2;
+ break;
+ case 3:
+ dpll_ctrl_n = DPLL_CTRL_3;
+ break;
+ case 4:
+ dpll_ctrl_n = DPLL_CTRL_4;
+ break;
+ case 5:
+ dpll_ctrl_n = DPLL_CTRL_5;
+ break;
+ case 6:
+ dpll_ctrl_n = DPLL_CTRL_6;
+ break;
+ case 7:
+ dpll_ctrl_n = DPLL_CTRL_7;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mode >= E_COMBOMODE_MAX)
+ return -EINVAL;
+
+ err = rsmu_read(rsmu->mfd,
+ dpll_ctrl_n + DPLL_CTRL_COMBO_MASTER_CFG,
+ &cfg, sizeof(cfg));
+ if (err)
+ return err;
+
+ /* Only need to enable/disable COMBO_MODE_HOLD. */
+ if (mode)
+ cfg |= COMBO_MASTER_HOLD;
+ else
+ cfg &= ~COMBO_MASTER_HOLD;
+
+ return rsmu_write(rsmu->mfd,
+ dpll_ctrl_n + DPLL_CTRL_COMBO_MASTER_CFG,
+ &cfg, sizeof(cfg));
+}
+
+int rsmu_cm_get_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 *mode)
+{
+ u16 dpll_ctrl_n;
+ u8 cfg;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_ctrl_n = DPLL_CTRL_0;
+ break;
+ case 1:
+ dpll_ctrl_n = DPLL_CTRL_1;
+ break;
+ case 2:
+ dpll_ctrl_n = DPLL_CTRL_2;
+ break;
+ case 3:
+ dpll_ctrl_n = DPLL_CTRL_3;
+ break;
+ case 4:
+ dpll_ctrl_n = DPLL_CTRL_4;
+ break;
+ case 5:
+ dpll_ctrl_n = DPLL_CTRL_5;
+ break;
+ case 6:
+ dpll_ctrl_n = DPLL_CTRL_6;
+ break;
+ case 7:
+ dpll_ctrl_n = DPLL_CTRL_7;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = rsmu_read(rsmu->mfd,
+ dpll_ctrl_n + DPLL_CTRL_COMBO_MASTER_CFG,
+ &cfg, sizeof(cfg));
+ if (err)
+ return err;
+
+ *mode = cfg & COMBO_MASTER_HOLD;
+
+ return 0;
+}
+
+int rsmu_cm_get_dpll_state(struct rsmu_cdev *rsmu, u8 dpll, u8 *state)
+{
+ u8 cfg;
+ int err;
+
+ /* 8 is sys dpll */
+ if (dpll > 8)
+ return -EINVAL;
+
+ err = rsmu_read(rsmu->mfd,
+ STATUS + DPLL0_STATUS + dpll,
+ &cfg, sizeof(cfg));
+ if (err)
+ return err;
+
+ switch (cfg & DPLL_STATE_MASK) {
+ case E_DPLL_STATE_FREERUN:
+ *state = E_SRVLOUNQUALIFIEDSTATE;
+ break;
+ case E_DPLL_STATE_LOCKACQ:
+ case E_DPLL_STATE_LOCKREQ:
+ *state = E_SRVLOLOCKACQSTATE;
+ break;
+ case E_DPLL_STATE_LOCKED:
+ *state = E_SRVLOTIMELOCKEDSTATE;
+ break;
+ case E_DPLL_STATE_HOLDOVER:
+ *state = E_SRVLOHOLDOVERINSPECSTATE;
+ break;
+ default:
+ *state = E_SRVLOSTATEINVALID;
+ break;
+ }
+
+ return 0;
+}
+
+int rsmu_cm_get_dpll_ffo(struct rsmu_cdev *rsmu, u8 dpll,
+ struct rsmu_get_ffo *ffo)
+{
+ u8 buf[6] = {0};
+ s64 fcw = 0;
+ u16 dpll_filter_status;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_filter_status = DPLL0_FILTER_STATUS;
+ break;
+ case 1:
+ dpll_filter_status = DPLL1_FILTER_STATUS;
+ break;
+ case 2:
+ dpll_filter_status = DPLL2_FILTER_STATUS;
+ break;
+ case 3:
+ dpll_filter_status = DPLL3_FILTER_STATUS;
+ break;
+ case 4:
+ dpll_filter_status = DPLL4_FILTER_STATUS;
+ break;
+ case 5:
+ dpll_filter_status = DPLL5_FILTER_STATUS;
+ break;
+ case 6:
+ dpll_filter_status = DPLL6_FILTER_STATUS;
+ break;
+ case 7:
+ dpll_filter_status = DPLL7_FILTER_STATUS;
+ break;
+ case 8:
+ dpll_filter_status = DPLLSYS_FILTER_STATUS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = rsmu_read(rsmu->mfd, STATUS + dpll_filter_status, buf, 6);
+ if (err)
+ return err;
+
+ /* Convert to frequency control word */
+ fcw = buf[0];
+ fcw |= buf[1] << 8LL;
+ fcw |= buf[2] << 16LL;
+ fcw |= buf[3] << 24LL;
+ fcw |= buf[4] << 32LL;
+ fcw |= buf[5] << 40LL;
+ if (buf[5] & BIT(7))
+ /* Sign extend */
+ fcw |= GENMASK(63, 48);
+
+ /* FCW unit is 2 ^ -53 = 1.1102230246251565404236316680908e-16 */
+ ffo->ffo = fcw * 111;
+
+ return 0;
+}
diff --git a/drivers/misc/rsmu_sabre.c b/drivers/misc/rsmu_sabre.c
new file mode 100644
index 0000000..8b27d6e
--- /dev/null
+++ b/drivers/misc/rsmu_sabre.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This driver is developed for the IDT 82P33XXX series of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/mfd/idt82p33_reg.h>
+#include <linux/mfd/rsmu.h>
+#include <uapi/linux/rsmu.h>
+
+#include "rsmu_cdev.h"
+
+int rsmu_sabre_set_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 mode)
+{
+ u16 dpll_ctrl_n;
+ u8 cfg;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_ctrl_n = DPLL1_OPERATING_MODE_CNFG;
+ break;
+ case 1:
+ dpll_ctrl_n = DPLL2_OPERATING_MODE_CNFG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (mode >= E_COMBOMODE_MAX)
+ return -EINVAL;
+
+ err = rsmu_read(rsmu->mfd, dpll_ctrl_n, &cfg, sizeof(cfg));
+ if (err)
+ return err;
+
+ cfg &= ~(COMBO_MODE_MASK << COMBO_MODE_SHIFT);
+ cfg |= (mode << COMBO_MODE_SHIFT);
+
+ return rsmu_write(rsmu->mfd, dpll_ctrl_n, &cfg, sizeof(cfg));
+}
+
+int rsmu_sabre_get_combomode(struct rsmu_cdev *rsmu, u8 dpll, u8 *mode)
+{
+ u16 dpll_ctrl_n;
+ u8 cfg;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_ctrl_n = DPLL1_OPERATING_MODE_CNFG;
+ break;
+ case 1:
+ dpll_ctrl_n = DPLL2_OPERATING_MODE_CNFG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = rsmu_read(rsmu->mfd, dpll_ctrl_n, &cfg, sizeof(cfg));
+ if (err)
+ return err;
+
+ *mode = cfg >> COMBO_MODE_SHIFT;
+
+ return 0;
+}
+
+int rsmu_sabre_get_dpll_state(struct rsmu_cdev *rsmu, u8 dpll, u8 *state)
+{
+ u16 dpll_sts_n;
+ u8 cfg;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_sts_n = DPLL1_OPERATING_STS;
+ break;
+ case 1:
+ dpll_sts_n = DPLL2_OPERATING_STS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = rsmu_read(rsmu->mfd, dpll_sts_n, &cfg, sizeof(cfg));
+ if (err)
+ return err;
+
+ switch (cfg & OPERATING_STS_MASK) {
+ case DPLL_STATE_FREERUN:
+ *state = E_SRVLOUNQUALIFIEDSTATE;
+ break;
+ case DPLL_STATE_PRELOCKED2:
+ case DPLL_STATE_PRELOCKED:
+ *state = E_SRVLOLOCKACQSTATE;
+ break;
+ case DPLL_STATE_LOCKED:
+ *state = E_SRVLOTIMELOCKEDSTATE;
+ break;
+ case DPLL_STATE_HOLDOVER:
+ *state = E_SRVLOHOLDOVERINSPECSTATE;
+ break;
+ default:
+ *state = E_SRVLOSTATEINVALID;
+ break;
+ }
+
+ return 0;
+}
+
+int rsmu_sabre_get_dpll_ffo(struct rsmu_cdev *rsmu, u8 dpll,
+ struct rsmu_get_ffo *ffo)
+{
+ u8 buf[5] = {0};
+ s64 fcw = 0;
+ u16 dpll_freq_n;
+ int err;
+
+ switch (dpll) {
+ case 0:
+ dpll_freq_n = DPLL1_HOLDOVER_FREQ_CNFG;
+ break;
+ case 1:
+ dpll_freq_n = DPLL2_HOLDOVER_FREQ_CNFG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = rsmu_read(rsmu->mfd, dpll_freq_n, buf, 5);
+ if (err)
+ return err;
+
+ /* Convert to frequency control word */
+ fcw = buf[0];
+ fcw |= buf[1] << 8LL;
+ fcw |= buf[2] << 16LL;
+ fcw |= buf[3] << 24LL;
+ fcw |= buf[4] << 32LL;
+ if (buf[4] & BIT(7))
+ /* Sign extend */
+ fcw |= GENMASK(63, 40);
+
+ /* FCW unit is 77760 / ( 1638400 * 2^48) = 1.68615121864946 * 10^-16 */
+ ffo->ffo = div_s64(fcw * 168615, 1000);
+
+ return 0;
+}
diff --git a/include/uapi/linux/rsmu.h b/include/uapi/linux/rsmu.h
new file mode 100644
index 0000000..28b9d94
--- /dev/null
+++ b/include/uapi/linux/rsmu.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Driver for the IDT ClockMatrix(TM) and 82p33xxx families of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#ifndef __UAPI_LINUX_RSMU_CDEV_H
+#define __UAPI_LINUX_RSMU_CDEV_H
+
+/* Set dpll combomode */
+struct rsmu_combomode {
+ __u8 dpll;
+ __u8 mode;
+};
+
+/* Get dpll state */
+struct rsmu_get_state {
+ __u8 dpll;
+ __u8 state;
+};
+
+/* Get dpll ffo (fractional frequency offset) in ppqt*/
+struct rsmu_get_ffo {
+ __u8 dpll;
+ __s64 ffo;
+};
+
+/*
+ * RSMU IOCTL List
+ */
+#define RSMU_MAGIC '?'
+
+/**
+ * @Description
+ * ioctl to set SMU combo mode.
+ *
+ * @Parameters
+ * pointer to struct rsmu_combomode that contains dpll combomode setting
+ */
+#define RSMU_SET_COMBOMODE _IOW(RSMU_MAGIC, 1, struct rsmu_combomode)
+
+/**
+ * @Description
+ * ioctl to get SMU dpll state.
+ *
+ * @Parameters
+ * pointer to struct rsmu_get_state that contains dpll state
+ */
+#define RSMU_GET_STATE _IOR(RSMU_MAGIC, 2, struct rsmu_get_state)
+
+/**
+ * @Description
+ * ioctl to get SMU dpll ffo.
+ *
+ * @Parameters
+ * pointer to struct rsmu_get_ffo that contains dpll ffo in ppqt
+ */
+#define RSMU_GET_FFO _IOR(RSMU_MAGIC, 3, struct rsmu_get_ffo)
+#endif /* __UAPI_LINUX_RSMU_CDEV_H */
--
2.7.4


2021-02-12 07:45:02

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Thu, Feb 11, 2021 at 08:16:15PM -0500, [email protected] wrote:
> From: Min Li <[email protected]>
>
> This driver supports 1588 related functions of ClockMatrix(TM)
> and 82P33xxx families of timing and synchronization devices.
>
> The driver is developed to be only used by Renesas PTP Clock
> Manager for Linux (pcm4l) software. It supports 1588/PTP
> releated functionalities that specific to Renesas devices
> but are not supported by general PHC framework. So pcm4l
> will use both the existing PHC driver and this module to
> complete 1588/PTP support. The supported functons are:
>
> -set combomode
> -get dpll's state
> -get dpll's ffo
>
> This driver must work with Renesas MFD driver to access SMU
> through I2C/SPI.
>
> Changes since v1:
> -Provide more background for purpose of the change.
> -Provide compat_ioctl support
> -Fix ioctl cmd definition

This "changes" list goes below the --- line.

And you seem to have ignored my review, especially about documenting the
sysfs files here, please do that as I can not accept this patch as-is.

greg k-h

2021-02-12 07:46:04

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Thu, Feb 11, 2021 at 08:16:15PM -0500, [email protected] wrote:
> +static int
> +rsmu_open(struct inode *iptr, struct file *fptr)
> +{
> + struct rsmu_cdev *rsmu;
> +
> + rsmu = container_of(iptr->i_cdev, struct rsmu_cdev, rsmu_cdev);
> + if (!rsmu)
> + return -EAGAIN;
> +
> + /* Only one open per device at a time */
> + if (!atomic_dec_and_test(&rsmu->open_count)) {
> + atomic_inc(&rsmu->open_count);
> + return -EBUSY;

This does not do what you think it does, and does not prevent multiple
applications from talking to your device at the same time.

There is no need for this at all, as it does not work, sorry. If
multiple apps talk to your device, it's their fault, not the kernel's
fault, that things go wrong.

And I thought that Arnd already told you to fix this?

thanks,

greg k-h

2021-02-12 15:41:42

by Min Li

[permalink] [raw]
Subject: RE: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

> > +
> > + /* Only one open per device at a time */
> > + if (!atomic_dec_and_test(&rsmu->open_count)) {
> > + atomic_inc(&rsmu->open_count);
> > + return -EBUSY;
>
> This does not do what you think it does, and does not prevent multiple
> applications from talking to your device at the same time.
>
> There is no need for this at all, as it does not work, sorry. If multiple apps
> talk to your device, it's their fault, not the kernel's fault, that things go
> wrong.
>
> And I thought that Arnd already told you to fix this?
>

Hi Greg

Sorry for not replying to the list, I am new so not very familiar with the process.

Can you elaborate why it doesn't work? I kind of borrow the idea from xilinx_sdfec.c and I don't see why it doesn't work.

I mean if an application failed at opening the device, how can it proceed to talk the device without a file descriptor?

Thanks

Min

2021-02-12 15:46:42

by Min Li

[permalink] [raw]
Subject: RE: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

> >
> > -set combomode
> > -get dpll's state
> > -get dpll's ffo
> >
> > This driver must work with Renesas MFD driver to access SMU through
> > I2C/SPI.
> >
> > Changes since v1:
> > -Provide more background for purpose of the change.
> > -Provide compat_ioctl support
> > -Fix ioctl cmd definition
>
> This "changes" list goes below the --- line.
>

Sorry, is this a problem that you are requesting me to address? I am bit confused...

> And you seem to have ignored my review, especially about documenting the
> sysfs files here, please do that as I can not accept this patch as-is.
>

If I come up with an rsmu.rst under Documentation/driver-api, is that something you are looking for?

2021-02-12 15:50:44

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Fri, Feb 12, 2021 at 03:39:03PM +0000, Min Li wrote:
> > > +
> > > + /* Only one open per device at a time */
> > > + if (!atomic_dec_and_test(&rsmu->open_count)) {
> > > + atomic_inc(&rsmu->open_count);
> > > + return -EBUSY;
> >
> > This does not do what you think it does, and does not prevent multiple
> > applications from talking to your device at the same time.
> >
> > There is no need for this at all, as it does not work, sorry. If multiple apps
> > talk to your device, it's their fault, not the kernel's fault, that things go
> > wrong.
> >
> > And I thought that Arnd already told you to fix this?
> >
>
> Hi Greg
>
> Sorry for not replying to the list, I am new so not very familiar with the process.
>
> Can you elaborate why it doesn't work? I kind of borrow the idea from
> xilinx_sdfec.c and I don't see why it doesn't work.

xilinx_sdfec.c has:

static int xsdfec_dev_open(struct inode *iptr, struct file *fptr)
{
return 0;
}

Which isn't even needed at all, but it is NOT trying to keep people from
calling open multiple times.

As for why the above logic does not work in your driver, think of what
happens if someone opens the character device node, and then calls
dup(2) on it and passes that file descriptor off to another program. Or
just calls it multiple times from different threads in the same program.
The kernel does not know what is happening here, and so, "do not allow
to be opened multiple times" does not do anything to keep userspace from
actually writing to the device node from multiple processes or threads.

So don't even try, it's not worth it.

> I mean if an application failed at opening the device, how can it
> proceed to talk the device without a file descriptor?

See above for how to do this.

thanks,

greg k-h

2021-02-12 16:00:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Fri, Feb 12, 2021 at 03:44:52PM +0000, Min Li wrote:
> > >
> > > -set combomode
> > > -get dpll's state
> > > -get dpll's ffo
> > >
> > > This driver must work with Renesas MFD driver to access SMU through
> > > I2C/SPI.
> > >
> > > Changes since v1:
> > > -Provide more background for purpose of the change.
> > > -Provide compat_ioctl support
> > > -Fix ioctl cmd definition
> >
> > This "changes" list goes below the --- line.
> >
>
> Sorry, is this a problem that you are requesting me to address? I am bit confused...

Yes, please place that list of changes below the --- line in your patch.
The documentation says to do this, right?

> > And you seem to have ignored my review, especially about documenting the
> > sysfs files here, please do that as I can not accept this patch as-is.
> >
>
> If I come up with an rsmu.rst under Documentation/driver-api, is that something you are looking for?

No, all sysfs files need to be documented in Documentation/ABI/

thanks,

greg k-h

2021-02-12 16:06:40

by Min Li

[permalink] [raw]
Subject: RE: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

> >
> > If I come up with an rsmu.rst under Documentation/driver-api, is that
> something you are looking for?
>
> No, all sysfs files need to be documented in Documentation/ABI/
>
> thanks,
>
> greg k-h

Hi Greg

I decided to follow Arnd's suggestion and drop the extra sysfs attributes declaration here.

Any other documents that you are looking for here?

2021-02-12 16:08:17

by Min Li

[permalink] [raw]
Subject: RE: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

>
> xilinx_sdfec.c has:
>
> static int xsdfec_dev_open(struct inode *iptr, struct file *fptr)
> {
> return 0;
> }
>
> Which isn't even needed at all, but it is NOT trying to keep people from
> calling open multiple times.
>
> As for why the above logic does not work in your driver, think of what
> happens if someone opens the character device node, and then calls
> dup(2) on it and passes that file descriptor off to another program. Or just
> calls it multiple times from different threads in the same program.
> The kernel does not know what is happening here, and so, "do not allow to
> be opened multiple times" does not do anything to keep userspace from
> actually writing to the device node from multiple processes or threads.
>
> So don't even try, it's not worth it.
>
> > I mean if an application failed at opening the device, how can it
> > proceed to talk the device without a file descriptor?
>
> See above for how to do this.
>
> thanks,
>
> greg k-h

Hi Greg

Thanks for your insight for this. Now I can see this change doesn't prevent deliberate hacker from opening the driver multiple times.

What I had in mind is that it does prevent some unintentional mistake like some one accidentally opens the application twice. The second
one would fail due to the change here.

2021-02-12 16:25:37

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Fri, Feb 12, 2021 at 04:02:14PM +0000, Min Li wrote:
> >
> > xilinx_sdfec.c has:
> >
> > static int xsdfec_dev_open(struct inode *iptr, struct file *fptr)
> > {
> > return 0;
> > }
> >
> > Which isn't even needed at all, but it is NOT trying to keep people from
> > calling open multiple times.
> >
> > As for why the above logic does not work in your driver, think of what
> > happens if someone opens the character device node, and then calls
> > dup(2) on it and passes that file descriptor off to another program. Or just
> > calls it multiple times from different threads in the same program.
> > The kernel does not know what is happening here, and so, "do not allow to
> > be opened multiple times" does not do anything to keep userspace from
> > actually writing to the device node from multiple processes or threads.
> >
> > So don't even try, it's not worth it.
> >
> > > I mean if an application failed at opening the device, how can it
> > > proceed to talk the device without a file descriptor?
> >
> > See above for how to do this.
> >
> > thanks,
> >
> > greg k-h
>
> Hi Greg
>
> Thanks for your insight for this. Now I can see this change doesn't prevent deliberate hacker from opening the driver multiple times.
>
> What I had in mind is that it does prevent some unintentional mistake like some one accidentally opens the application twice. The second
> one would fail due to the change here.

Do not add kernel code that does not work for it's intended purpose :)

thanks,

greg k-h

2021-02-12 19:11:02

by Min Li

[permalink] [raw]
Subject: RE: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

>
> On Fri, Feb 12, 2021 at 03:44:52PM +0000, Min Li wrote:
> > > >
> > > > -set combomode
> > > > -get dpll's state
> > > > -get dpll's ffo
> > > >
> > > > This driver must work with Renesas MFD driver to access SMU
> > > > through I2C/SPI.
> > > >
> > > > Changes since v1:
> > > > -Provide more background for purpose of the change.
> > > > -Provide compat_ioctl support
> > > > -Fix ioctl cmd definition
> > >
> > > This "changes" list goes below the --- line.
> > >
> >
> > Sorry, is this a problem that you are requesting me to address? I am bit
> confused...
>
> Yes, please place that list of changes below the --- line in your patch.
> The documentation says to do this, right?
>
Hi Greg

Do you mean this "---" like below? How can I do that? Sorry I was never asked to do that from other reviewer.

Signed-off-by: Min Li <[email protected]>
---
drivers/misc/Kconfig | 13 ++
drivers/misc/Makefile | 3 +
drivers/misc/rsmu_cdev.c | 449 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/misc/rsmu_cdev.h | 75 ++++++++
drivers/misc/rsmu_cm.c | 214 ++++++++++++++++++++++
drivers/misc/rsmu_sabre.c | 153 ++++++++++++++++
include/uapi/linux/rsmu.h | 61 +++++++
7 files changed, 968 insertions(+)
create mode 100644 drivers/misc/rsmu_cdev.c
create mode 100644 drivers/misc/rsmu_cdev.h
create mode 100644 drivers/misc/rsmu_cm.c
create mode 100644 drivers/misc/rsmu_sabre.c
create mode 100644 include/uapi/linux/rsmu.h

2021-02-13 08:31:13

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Fri, Feb 12, 2021 at 07:06:17PM +0000, Min Li wrote:
> >
> > On Fri, Feb 12, 2021 at 03:44:52PM +0000, Min Li wrote:
> > > > >
> > > > > -set combomode
> > > > > -get dpll's state
> > > > > -get dpll's ffo
> > > > >
> > > > > This driver must work with Renesas MFD driver to access SMU
> > > > > through I2C/SPI.
> > > > >
> > > > > Changes since v1:
> > > > > -Provide more background for purpose of the change.
> > > > > -Provide compat_ioctl support
> > > > > -Fix ioctl cmd definition
> > > >
> > > > This "changes" list goes below the --- line.
> > > >
> > >
> > > Sorry, is this a problem that you are requesting me to address? I am bit
> > confused...
> >
> > Yes, please place that list of changes below the --- line in your patch.
> > The documentation says to do this, right?
> >
> Hi Greg
>
> Do you mean this "---" like below? How can I do that? Sorry I was never asked to do that from other reviewer.

Yes, that line.

The documentation should tell you how to do that, as per my patch bot:

- This looks like a new version of a previously submitted patch, but you
did not list below the --- line any changes from the previous version.
Please read the section entitled "The canonical patch format" in the
kernel file, Documentation/SubmittingPatches for what needs to be done
here to properly describe this.

thanks,

greg k-h

2021-02-16 19:52:37

by Min Li

[permalink] [raw]
Subject: RE: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

>
> Yes, that line.
>
> The documentation should tell you how to do that, as per my patch bot:
>
> - This looks like a new version of a previously submitted patch, but you
> did not list below the --- line any changes from the previous version.
> Please read the section entitled "The canonical patch format" in the
> kernel file, Documentation/SubmittingPatches for what needs to be done
> here to properly describe this.
>
> thanks,
>
> greg k-h

Hi Greg

I read documentation. Am I supposed to add the "---" marker line manually by myself when doing "git commit --amend"? git commit will
always add a "---" marker line before the actual change like below

Signed-off-by: Min Li <[email protected]>
---
Changes since v1:
-Provide more background for purpose of the change.
-Provide compat_ioctl support
-Fix ioctl cmd definition
---
drivers/misc/Kconfig | 13 ++
drivers/misc/Makefile | 3 +

2021-02-17 07:58:04

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH net-next v2] misc: Add Renesas Synchronization Management Unit (SMU) support

On Tue, Feb 16, 2021 at 07:50:49PM +0000, Min Li wrote:
> >
> > Yes, that line.
> >
> > The documentation should tell you how to do that, as per my patch bot:
> >
> > - This looks like a new version of a previously submitted patch, but you
> > did not list below the --- line any changes from the previous version.
> > Please read the section entitled "The canonical patch format" in the
> > kernel file, Documentation/SubmittingPatches for what needs to be done
> > here to properly describe this.
> >
> > thanks,
> >
> > greg k-h
>
> Hi Greg
>
> I read documentation. Am I supposed to add the "---" marker line manually by myself when doing "git commit --amend"? git commit will
> always add a "---" marker line before the actual change like below
>
> Signed-off-by: Min Li <[email protected]>
> ---
> Changes since v1:
> -Provide more background for purpose of the change.
> -Provide compat_ioctl support
> -Fix ioctl cmd definition
> ---
> drivers/misc/Kconfig | 13 ++
> drivers/misc/Makefile | 3 +

You add the text after you have created the patch with 'git
format-patch' by editing the text file before sending it off to us. You
don't add it to the changelog comment itself.

hope this helps,

greg k-h