ftp://ftp.kernel.org/pub/linux/kernel/people/alan/2.4/
2.4.2-ac7
o Fusion driver updates (Steve Ralston)
o Olympic fix (Andrew Morton)
o Work around hardware bug in older Rage128 (Gareth Hughes)
o Handle broken PIV MP tables with a NULL ioapic
o Use capable in esp serial driver (Rob Radez)
o Use capable not suser in console (Rob Radez)
o Small networking fixups (Dave Miller)
o Fix make menuconfig breakage (Keith Owens)
o Enable cmpxchg8 on Rise P6 (Dave Jones)
o Fix wakeup losses on cpu_allowed using tasks (Manfred Spraul)
o Maestro3 now works with > 256Mb of ram (Zach Brown)
o Opl3sa2 isapnp=0 handling was wrong (J?r?me Aug?)
| I've fixed it a little differently however
o Turn off slow kmem chain check if not doing (Ingo Molnar, me)
slab debugging
o Fix cpu speed checking code (Mikael Pettersson)
o Make bus computation more accurate (me)
o Advantech watchdog driver (Marek Michalkiewicz)
o dz.c serial clean up (Rob Radez)
o Fix MSG_TRUNC for OOB TCP (Ingo Molnar)
o Fix oops on unconfigured loop (Arjan van de Ven)
o Drop nbd ll_rw_blk change (Linus has spoken ;))
o pci resource api (Jeff Garzik)
o Further Natsemi updates (Don Becker,
Jeff Garzik)
o Switch aurora serial to capable() (Rob Radez)
o Radeon frame buffer (Ani Joshi)
2.4.2-ac6
o Remove incorrect modules doc changes (Keith Owens)
o Fix elf.h defines (Keith Owens)
o Add 0x2B mtrr decode for intel/cyrix III (me)
o Make bigmem balancing somewhat saner (Mark Hemment)
o Update irda (Dag Brattli)
o New FIR dongle support (Dag Brattli)
o 3ware driver updates (Adam Radford)
o Further reiserfs tail conversion fixes (Chris Mason)
o Fix tpqic02 to use capable (Rob Radez)
o Set last_rx on comtrol hostess driver (Arnaldo Carvalho
de Melo)
o Raid Oops fix (Neil Brown)
o Fix last_rx/skb refs on cyc_x25 (Arnaldo Carvalho
de Melo)
o Fix last_rx/skb refs on 3c589 (Arnaldo Carvalho
de Melo)
o Highmem fixes for deadlock (Andrea Arcangeli,
Ingo Molnar)
o Another minor tulip fix (Jeff Garzik)
o Fix hinote and maybe other ps/aux hangs (me, Mark Clegg)
o Fix resource handling on 53c7xxx (Rasmus Andersen)
o Fix scsi_register failure handling on AMD scsi (Rasmus Andersen)
o Fix resource handling on aha1740 (Rasmus Andersen)
o Fix resource handling on blz1230 (Rasmus Andersen)
o Fix resource handling for dec_esp driver (Rasmus Andersen)
o Fix resource handling for fastlane scsi (Rasmus Andersen)
o Fix scsi_register failure on qlogic_fas (Rasmus Andersen)
o Fix scsi_register failure on qlogicfc (Rasmus Andersen)
o Fix irq alloc failure leak on sun3x_esp (Rasmus Andersen)
o Fix wd7000 init failures (Rasmus Andersen)
o Fix nbd device (Steve Whitehouse)
o Fix try_atomic_semop (Manfred Spraul)
o Parport fixes (Tim Waugh)
o Starfire start/stop if fix (Ion Badulescu)
o Fix raw.c off by one bug (Tigran Aivazian)
o USB hub kmalloc wrong size corruption fix (Peter Zaitcev)
2.4.2-ac5
o Add Epson 1240U scanners to usb scanner (Joel Becker)
o Fix eth= compatibility (Andrew Morton)
| Should fix 3c509 problems for one
o Add Pnp table to opl3sa2 (Bill Nottingham)
o Update loop driver fixes (Jens Axboe, Andrea
Arcangeli, Al Viro)
o Fix busy loop in usb storage (Arjan van de Ven)
o Add cardbus support to olympic (Mike Phillips)
o Make BUG() configurable to save space (Arjan van de Ven)
o Add configurability to most kernel debugging (various people)
functions on x86
o Richard G?nther/binfmt_misc page move (Richard G?nther)
o Fix de4x5 crash (Nikita Schmidt)
o Hopefully fix the smc-mca driver (me)
o Don't run the disk queue if we didnt launder (Marcelo Tosatti)
any pages
o ALi 6 channel audio and sp/dif updates (Matt Wu)
o Fix USB thread wakeup scheduling (Arjan van de Ven)
o Fix alignment problems with uni16_to_x8 (Ivan Kokshaysky)
2.4.2-ac4
o Fix Make xconfig failure (J Magallon)
o Fix a typo in the ISDN docs (Jim Freeman)
o Fix the 3ware driver a bit more (Ben LaHaise)
| should now be usable
o Update Dave Jones contact info (Dave Jones)
o Revert wavelan inline->macro change (Jean Tourillhes)
| CVS gcc and 2.96-74 don't accidentally unline it now
o Zerocopy TCP/IP patches (Dave Miller,
Alexey Kuznetsov,
and many more)
o Fix up command line options to old ncr driver (Martin Storsj?)
o NFS locking should call fs layer locking if (Brian Dixon)
present
o Fix cs46xx wakeup/poll problem (David Huggins-Daines)
o Add some missing MTD config help texts (Steven Cole,
David Woodhouse)
o Fix Alpha build bug (Sven Koch)
o Final i386/ptrace bit
o Finish off the vmalloc/WP fixup (me)
o Include file config.h fixes (Niels Jensen)
o More dscc4 updates (Francois Romieu)
2.4.2-ac3
o Add documentation for the fb interfaces (Brad Douglas)
o Work around apic disable_irq hardware bugs (Maciej Rozycki)
o Rage128 not "Rage 128" (Brad Douglas)
o Make ioremap debugging conditional (J Magallon)
o Merge Ninja pcmcia scsi driver (YOKOTA Hiroshi)
o Update 8139too docs (Jeff Garzik)
o Tulip updates, merge bits from 0.92 (Jeff Garzik,
Don Becker)
o Epic100 update (Jeff Garzik)
o Clean up Ariadne driver (Jeff Garzik)
o Remove dead wavelan prototype (Jeff Garzik)
o Remove unused arlan variable (Jeff Garzik)
o Clean up lance public symbols (Jeff Garzik)
o Switch fmv18x to spinlocks, fix other bits (Jeff Garzik)
o Clean up acenic global symbols (Jeff Garzik)
o Fix IDE blocking kmalloc with irqs off (Arjan van de Ven)
| I've redone the code a bit so it might be wrong again 8)
2.4.2-ac2
o Merge the loop device fixes (Jens Axboe)
o Fix af_unix SYSCTL=n build failure (Russell King)
o Adjust the throttling point for write (Jens Axboe)
throttles
o Fix sunhme ioremap (Andrey Panin)
o Fix disk change handling with removable sd (Alex Davis)
o Update/fix irq docs (Matthew Wilcox)
o Update PPC gmac and ncr885e drivers (Cort Dougan)
| bmac patch dropped as it loses other fixes
o Kai Petzke has moved (Kai Petzke)
o Fix starfire driver so pump doesnt kill it (Ion Badulescu)
2.4.2-ac1
o Merge Linus 2.4.2 tree
| We now have disagreeing ymfpci fixes. I've kept the ones
| I tested for now.
o Back out sr.c change (me)
o Fix moxa smartio driver (Tom Mraz)
o Hugh Blemings change of address (Hugh Blemings)
o Allow more i2o config time for slow calls
o Aty128fb updates (Brad Douglas,
Benjamin Herrenschmidt,
Michel Danzer,
Andreas Hundt)
o Add "loop" name to the root dev names (Barry Nathan)
o Further spelling cleanups (Dag Wieers)
o Remove bogus warning emissions from aha1740 (Nick Holloway)
o Remove surplus assignment in vmalloc (Francis Galiegue)
o Remove unneeded ifdef in i386/kernel/irq.c (Francis Galiegue)
o Add door locking ioctl to ide-floppy (Francis Galiegue)
o Allow scsi disk opening O_NDELAY for removables (me)
o Fix cosa compile warnings (me)
o Clean up dumpable/setuid write ordering (me)
o Hopefully fix the 3ware crashes (me)
2.4.1-ac20
o Update fusion drivers (Steve Ralston)
o Further VM page launder balancing (Rik van Riel)
o Hopefully fix ext2 block size checking (Andries Brouwer)
o Update the i810 random number generator (Jeff Garzik)
o Hopefully fix the bonding crash on down/reboot (Dave Miller)
o Tulip update (add accton comets, clean up pm) (Jeff Garzik)
o Merge wavelan_cs, pcnet_cs and fmvj18x_cs (Jeff Garzik)
changes from Dave Hinds tree
o Make awe32 behave in 2.4 like 2.2 if given an (Bill Nottingham)
io
o Fix alpha build problems in stallion, c101 (Andrzej Krzysztofowicz)
synclink and wavfront drivers
o Add isa_check_signature and missing ioctl ids (Andrzej Krzysztofowicz)
for hayesesp
o Fix math emulation bug (Martin Schwidefsky)
o Disable APIC during APM to avoid suspend/resume (Mikael Pettersson)
problems.
o SMP kernel on UP hardware APIC fixes (Maciej Rozycki)
o Code cleanups in nmi, reduce NMI rate to 1Hz (Mikael Pettersson)
2.4.1-ac19
o Fix second module/exception table race (me)
| I hope ;)
o Additional CPIA usb ident (Adam J Richter)
o Add SA1100 udc and also stall recovery to (Oleg Drokin)
usbnet
o Limit smbfs to 2Gig/file (Urban Widmark)
o Config/doc update for the eicon driver (Armin Schindler)
o Update PMS driver to new request_region (Andrey Panin)
o sys_semop bug check is overcareful (Hugh Dickins)
o Fix ipc off by one on checks in ipc (Hugh Dickins)
o Allow exceptions during module init (Philipp Rumpf)
o Driver namespace cleanup (Jeff Garzik)
o Network driver cleanups (Jeff Garzik,
o PPC irq updates (Paul Mackerras)
o SMP fixes for PPC boxes (Paul Mackerras)
o Fix tmpfs block size reporting (Christoph Rohland)
o Update maintainers to add missing YAM maintainer(Jean-Paul Roubelat)
o Add hooks for /proc/rtas (Paul Mackerras)
o Fix wrong bogomip reporting on SMP ppc (Paul Mackerras)
o Remove unused dbcf inline function on PPC (Paul Mackerras)
o Update Cort Dougans email/urls (Paul Mackerras)
o Dont assume bit settings on pcnet/pci chips (Paul Mackerras)
o Add mac ppc serial console hooks (Paul Mackerras)
o Frame buffer driver updates for ppc (Paul Mackerras)
o Fix devfs names for ppc serial (Paul Mackerras)
o Move some symbols out of net where they didnt
belong, and into right export locations (Andrzej Krzysztofowicz)
o Tidy and fix up syncppp drivers (Krzysztof Halasa)
2.4.1-ac18
o Fix SO_SNDTIMEO bugs (Alexey Kuznetsov)
o Fix tmpfs fsync (Lennert Buytenhek)
o PPC now uses generic pci bus setup (Paul Mackerras)
o Remove PPC boot argument printing (Paul Mackerras)
o Jeff Tranter has moved (Jeff Tranter)
o ymf_pci driver cleanups (Pete Zaitcev)
o Fix USB 2.0 compliance in hub.c (Brad Hards)
o Fix usb hub device claim race (Paul Mackerras)
o Fix some bugs in mac_hid driver (Paul Mackerras)
o Fix more typos (Dag Wieers)
o PPC compile warnings/symbol export fixes (Paul Mackerras)
2.4.1-ac17
o Fix pegasus for bigendian (Roman Weissgaerber)
o Further smbfs fixes (Urban Widmark)
o Update ISDN version tags (Kai Germaschewski)
o Finish ISDN move to new style module_init (Kai Germaschewski)
o Small Eicon driver updates/fix license bug (Armin Schindler)
o Fix reiserfs tail packing problem (Alexander Zarochentcev
Chris Mason)
o Export aci symbols from drivers/sound/aci.c (Alexandr Kanevskiy)
o Merge Linus 2.4.2pre4
o Starfire update (Ionu Badulescu)
o Fix 3270 merge (Richard Hitt)
2.4.1-ac16
o Fix the exception table/unload race (me)
o Further tulip fixup (Manfred Spraul)
o Fix USB oops on traverse/delete race (Randy Dunlap)
o Set max_sectors to 255 for hd/xd drivers (Paul Gortmaker)
| This should make them work again
o Fix typo in USB makefile (Arjan van de Ven)
o Fix accidental change to scsi_scan (Steve Ralston)
o Hid rollover/endian fixes (Paul Mackerras)
o Drop via pci fixup (me)
o Further hp5300 fixups (Arjan van de Ven)
o PCnet 32 init changes for non SEPROM cards (Eli Carter)
o Fix acpi idle reporting on SMP (Philipp Hahn)
o Add non PCI pci device list walk macro (me)
| pointed out by Mikael Pettersson
o IBM S/390 3270 drivers (Richard Hitt)
2.4.1-ac15
o Fix the non booting winchip/cyrix problem (me)
| Nasty interaction with the vmalloc fix
| wants a cleaner solution. This one is a hack
| to get people up and running again
o Fix typo in vfat changes (OGAWA Hirofumi)
o Update scsi blacklist table (Karsten Hopp)
o dscc4 wan driver update (Francois Romieu)
o Fix clgenfb warning (Bryan Headley)
2.4.1-ac14
o Fix tulip problems introduced by in ac13 (Manfred Spraul)
o S/390x build fixes (Ulrich Weigand)
o Fix off by one error in octagon driver (David Woodhouse)
o Fix dasd driver for new queues (Holger Smolinksi)
o Networking standards compliance fixes
o Fix binary layout assumptions in sym53c416 (Arjan van de Ven)
o tmpfs timestamps (Christoph Rohland)
o Further mkdep changes (Keith Owens)
o Fix 16bit vfat handling (OGAWA Hirofumi)
o JIS nls fixes (OGAWA Hirofumi)
o Handle more than 8 luns (Eric Youngdale,
Doug Gilbert)
o Minor scsi clean ups (Eric Youngdale)
2.4.1-ac13
o Fix pnic tulip problems (Manfred Spraul)
o Fix USB printer read and poll problems (Johannes Erdfelt)
o Fix parport pci list corrupt bug (Tim Waugh)
o Fix sbpcd driver crashes (Paul Gortmaker)
o Clarify the locking doc (Rusty Russell)
o i810 audio doesnt need OSS (Jeff Garzik)
o Fix vmalloc fault race (Mark Hemment)
o Makedep fixes (Keith Owens)
o Fix missing unlock_kernel on usb hub (Paul Mundt)
o Fix smbfs+bigmem, buffer and listing bugs (Urban Widmark)
o Merge tms380 isa token ring support (Jochen Friedrich)
o Sigmatel change didnt help, removed (Jeff Garzik)
2.4.1-ac12
o Make tmpfs use link counts of 2 on directories (Christoph Rohland)
o Update Documentation/sound/Introductions (Wade Hampton)
o Fix bug in new tlb shootdown code (Ben LaHaise)
o Add isa_* api to the Alpha (Richard Henderson)
o Export down_trylock on Alpha (Richard Henderson)
o Fix maestro3 build on ia64 (Bill Nottingham)
2.4.1-ac11
o Hack the setup code to do the right thing for (me)
Cyrix processors. Cpuid on cyrix should now work
o Change sigmatel codec inits (Jeff Garzik)
o Revised TLB shootdown patch (Ben LaHaise)
o Use pci quirks to handle the nonstandard irq (Andrey Panin)
setup for VIA ACPI
o If a user sets an io on the opl3sa2 assume they (me)
mean it even if isapnp isnt turned off
o Fix xmms cpu burn on i810 audio (Marcus Sundberg)
o Fix pnic problems with tulip driver (Manfred Spraul)
o Add pci skeleton driver (Jeff Garzik)
o Fix vfat mishandling of 16bit characters (Kazuki Yasumatsu)
o Fix syntax things found by his source code (Jean-Luc Leger)
analyser
o Fix pcmcia ixj build bug (Florian)
o Remove dead via sound docs (Jeff Garzik)
o add __dev_alloc_skb for drivers needing to force(Jeff Garzik)
allocation types
o Fix arcnet initializers (Jeff Garzik)
o Fix various warnings (Keith Owens)
o Further MPT fusion updates (Steve Ralston)
o sock_alloc_send_skb fix (Manfred Spraul)
o Fix signed/unsigned handling on 8139too (Jeff Garzik)
o Document problem with old powertweak (Dave Jones)
o s/controler/controller/ spelling fixes
o S/390 build fixes (Neale Ferguson)
2.4.1-ac10
o Merge with Linus 2.4.2pre3
o More net driver clean up (Jeff Garzik)
o Further maxiradio fix (Francois Romieu)
o Lock reclaiming fixes (MCL)
o Update ver_linux (Steven Cole)
o Add support for the Socket LP-E CF+ ethernet (Nicolas Pitre)
o Fix microtek scanner abort handling (Oliver Neukum)
o Fix very dumb bug in my dma.c changes that (me)
Linus noticed
o Clean up AGP alloc/destroy a little (me)
| Again a Linus request
o Remove dead 8129 config help (Dave Jones)
o Clean up extra unneeded check in setup.c (Dave Jones)
o Improve mkdep, remove acpi special case (Keith Owens)
o Fix bogus dead comment in fs.h (Jens Axboe)
o Clean up config.in syntax errors (Christoph Hellwig)
o Offer Duron in CPU option list for clarity (Terje Rosten)
o New binutils need --oformat, old ones handle it (Andreas Jaeger)
o Move bitops include in fs.h inside __KERNEL__ (Herbert Xu)
o Fix misspellings of weird (Felix Odenkirchen)
o Fix typos of 'valid' while we are at it (Luuk van der Duim)
2.4.1-ac9
o Merge with Linus 2.4.2pre2
o Highmem bounce fixes (Ingo Molnar)
o Fix cosa driver kfree (Jan Kasprzak)
o Clean up pdoc202xx driver sleeps (Vojtech Pavlik)
o Final bits of NFS file handle changes (Trond Myklebust)
o Fix usbnet driver (David Brownell)
o ATM includes fixes (Werner Almesberger)
o Remove unneeded vm_enough_memory check (Werner Almesberger)
o Fix free_dma prototype case (Bill Nottingham)
o Fix build bugs from pci_match_device fix (me)
o HP5300 USB scanner driver (Oliver Neukum,
John Fremlin,
Jeremy Hall)
o DSP_SETFRAGMENT fixes for ymfpci (Pavel Roskin)
o Fix codafs error returns (Rob Radez)
o Fix 48 misspellings of interrupt (Andr? Dahlqvist)
o Fix 20 misspellings of successful (Andr? Dahlqvist)
o Fix 11 misspellings of suppress (Andr? Dahlqvist)
o Fix 46 misspellings of address (Andr? Dahlqvist)
o Fix 26 misspellings of receive (Andr? Dahlqvist)
o Fix 7 misspellings of acquire (Andr? Dahlqvist)
o Fix 4 misspellings of unneccessary (Andr? Dahlqvist)
o Fix 13 misspellings of until (Andr? Dahlqvist)
2.4.1-ac8
o Fix irlap speed changes and kfrees (Jean Tourrilhes)
o Further NTFS updates (Anton Altaparmakov,
Yuri Per, Rob Radez)
o Fix buglets in config.in for aic7xxx (Andrzej Krzysztofowicz)
o Cleanup irda QoS code (Jean Tourrilhes)
o Fix mca documentations (Rob Radez)
o Fix irlan device attach problems (Dag Brattli)
o Fix irda dongle crash case (Dag Brattli)
o Change Kaweth firmware loading, add DU-E10 (Eric Sandeen)
o pci_enable cleanups for networking (Jeff Garzik)
o Fix rcpci45 probing (Jeff Garzik)
o Use SET_MODULE_OWNER() in lanstreamer (Jeff Garzik)
o Use pcmcia defines as per seperate pcmcia net (Jeff Garzik)
o Fix people calling netif_start_queue from a (Jeff Garzik)
timeout
o Remove 8129 driver (use 8139too) (Jeff Garzik)
o Remove dead malloc.h from net drivers (Jeff Garzik)
o Update eata driver to 6.04 (Dario Ballabio)
o Add DE320 support to ne2.c (Alfred Arnold)
o Kernel hacking doc updates (John Levon)
o Fix CPU detection offsets in head.S (Mikael Pettersson)
o Fix apic init/cpu detect problems (Mikael Pettersson)
2.4.1-ac7
o Rebalance the 2.4.1 VM (Rik van Riel)
| This should make things feel a lot faster especially
| on small boxes .. feedback to Rik
o Silence osf syscall error printk (Ivan Kokshaysky)
o Don't trust ARC irq routing on ruffian (Ivan Kokshaysky)
o Report the right module on 3c59x for pcmcia (Arjan van de Ven)
o Update i82365 driver to add locks, delays, and (Arjan van de Ven)
'bouncing' on the card detect
o Get the name right on ide-cs (v ide_cs) and do (Arjan van de Ven)
resource claims
o Merge parport_cs (David Hinds)
o Merge sedlbauer_cs (Marcus Niemann)
o Fix a bug in the Cyrix pirq routing (me)
2.4.1-ac6
o Fix eepro100 reporting on lockup fix (Ion Badulescu)
o Clean up i810 error message (me)
o Fix S390 build bug (me)
o Update version id on cpqarray driver (Charles White)
o Further aic7xxx fixes (Doug Ledford)
| again please report aic7xxx stuff to Doug
o Further maxiradio cleanups (Dimitromanolakis Apostolos)
o Change ide to use mdelay cleanly (Petr Vandrovec)
| Still broken for PROMISE if no IDE_CS
o Fix duplicated ncpfs fix (Petr Vandrovec)
o Improve inode hash function (Dave Miller)
o Correct 62 misspellings of transferred (Andre Dahlqvist)
o Update AC97 codec setup and tables (Jeff Garzik)
2.4.1-ac5
o Fix zero page corruption (Ben La Haise)
o Elevator corruption fixes (Jens Axboe, Linus)
o Fix fdatasync possible corruption problem (Arjan van de Ven)
o Further KSLI ethernet fixes (Eric Sandeen)
o Merge the correct version of the pm fixes (me)
| noted by Mikael Pettersson
o Account for inode/dcache in free memory (Rik van Riel)
o Add info on how to check reiserfsprogs versions (Steven Cole)
o Disable write combining on serverworks LE chips (Mark Rusk)
o Fix via audio crashes (Jeff Garzik)
o Fix ip accounting rules bug (Rusty Russell)
o Handle USB printers that use device not (Johannes Erdfelt)
interface descriptors
o Fix wheel on graphire usb tablet (Peter Hofmann)
o Clean up maxiradio driver (Francois Romieu)
o Fix visor USB size reporting on buffers (Greg Kroah-Hartmann)
o Update USB serial documentation (Greg Kroah-Hartmann)
o Fix locking on etherworks3 ethernet (Jeff Garzik)
o Fix empeg USB driver problems (Gary Brubaker)
o Generic USB serial driver fixes (Greg Kroah-Hartmann)
o Update USB serial configure.help (Greg Kroah-Hartmann)
o Add more device support to mct_u232 USB (Cornel Ciocirlan)
o Fix typo in asm-ppc/semaphore.h (Andre Dahlqvist)
o Report reiserfs tools in ver_linux (Steven Cole)
o Fix resource leaks in NCR_53c406, atari_scsi (Rasmus Andersen)
and qlogicisp
o Move pci_enable_device earlier for hamachi (Dave Jones)
o Type 6 drives are apparently floppy 2.88M (Dave Jones)
o Remove duplicate pci_enable_device in ne2kpci (Dave Jones)
2.4.1-ac4
o Fix sk_in use counting in svcsock.c (Neil Brown)
| Not yet a complete and final agreed solution
o Add support for KLSI USB ethernet (Brad Hards,
Stephane Alnet, 'the Zapman', and co)
o Update aic7xxx driver (Doug Ledford)
| Please test this carefully and cc reports to Doug
o Add help for CONFIG_INPUT (Steven Cole)
o 3c523 driver update (Tom Sightler)
o Fix reiserfs Changes entry further (Steven Cole)
o Limit ide scatter gather to 128 blocks (Jens Axboe)
o Merge hppa config.in changes (Matthew Wilcox)
o Fix tx timeout recovery on via rhine (Manfred Spraul)
o Fix stale comments in fs/block_dev.c (Tigran Aivazian)
o Further defxx driver work (Maciej Rozycki)
o winbond 840 reported wrong setting value (Maciej Rozycki)
o Guillemot Maxi radio support (Dimitromanolakis Apostolos)
o Allow sleeping in pm callbacks but with locking (me)
working
2.4.1-ac3
o Remove ancient dead net/Changes file (Janice Girouard)
o Merge Linus 2.4.2pre1
o Resync xirc2ps with Dave Hinds tree (dilinger)
o Finish sorting out ramfs problems (Mike Galbraith)
o Update AWE32 documentation (Andre Dahlqvist)
o Remove reference to dead PPP documentation (Andre Dahlqvist)
o Make max_map tunable (Werner Almesberger)
o Fix dead references to java support in some (Andre Dahlqvist)
arch/config
o Make shmfs estimate size limits if none set (Christoph Rohland)
o Revert Crusoe hanging pci hanging changes
| Im still chasing something weird in this
| area that some of the pci changes I have fixes...
o Merge HPPA hackers into CREDITS (Mathew Wilcox)
o Merge some of the HPPA updates (Mathew Wilcox)
o Add Reiserfs tools to changes (Steven Cole)
o Fix i2o Configure.help typo (YOSHIMURA Keitaro)
o SuperH HD64465 host bridge support (Greg Banks)
o Fix modversion.h includes (Keith Owens)
o Tlan driver probing updates (Jeff Garzik)
o Change media drivers to use new style module (me)
locking
| Janitorial job - fix the last ones that
| don't use module_*() and dump the init code
2.4.1-ac2
o Fix matrox G450 framebuffer support (Petr Vandrovec)
o Fix description of DMA-mapping.txt (Dave Miller)
o Fix accidental revert of classifier bug (Dave Miller)
o Fix accidental revert of isdn change
o Fix datagram hang on shutdown (Alexey Kuznetsov)
o Fix 64bit build of clntproc (Michal Jaegermann)
| wants a tidier solution yet
o Fix ide toc caching bug introduced in 2.4.0 (Fredrik Vraalsen)
| this should fix the DVD playback problems
o Swapfs renaming and final bits (Christoph Rohland)
o Further APIC/NMI updates (Mikael Pettersson)
o Add further kernel doc contributions (John Levon)
o ACPI battery tweaks (Pavel Machek)
o Further ramfs fixes (Ingo Oeser)
o ROMFS fixes (Mike Galbraith)
o CS4281 fixes (Thomas Woller)
o Shift to authors official fixes for acenic (Jes Sorensen)
o Update the usb host<->host network drivers (David Brownell)
| Experimental but he wanted feedback so if you
| have one beat it up a bit
2.4.1-ac1
o Resync with Linus 2.4.1
o Fix recursive make_request crash (Ingo Molnar)
o Updated VIA IDE driver (Vojtech Pavlik)
| Please exercise due care and caution testing this
| bit...
o Fix case where threaded apps might write to (Ben LaHaise)
freed kernel memory
o Fix ACPI oopses on tecra (apparently bios bugs) (Pavel Machek)
o AHA152x fixes from maintainer (Juergen Fischer)
o Fix case where scsi could hang on boot waiting (Rogier Wolff)
for a disk spinup
o Further maestro3 pm work (Zach Brown)
o Further NTFS fixes (Yuri Per)
o Add GNU make to the list of URLs in Changes (Steven Cole)
o Make dmx3191d enable device before touching it (Rasmus Andersen)
o Make the sbpcd driver actually useful in 2.4 (Paul Gortmaker)
o Make buslogic enable device before touching it (Rasmus Andersen)
o Fix tty module locking mishandling (Maciej Rozycki)
o Workaround code for APIC problems with ne2k (Maciej Rozycki)
| this will break original 82489DX devices for now
| ie _very_ early dual pentium boards
o Fix iptos netfilter bug (Rusty Russell)
o Fix get/set_fpu_mxcsr to check xmm ont fxsr (Doug Ledford)
o Fix name_to_kdev_t symbol (Adam J Richter)
o Update magic sysrq docs (Jeremy Dolan)
o Support for ETinc PCIsync boards (Francois Romieu)
o Mass duplicated word spelling fixes (Dave Jones)
o Update sb driver to use spinlocks (Chris Rankin)
o Fix leak in bmac driver (Hans Grobler)
o Fix kmalloc check in atm/common (Hans Grobler)
o Fix buffer leak in defxx (Hans Grobler)
o Fix kmalloc check in netrom driver (Hans Grobler)
|BTW side exercise - how about using vmalloc here ?
o Ditto for rose (Hans Grobler)
|Ditto for comment ;)
o Fix lockd 64bit handling (H J Lu)
o Tidy pci_match_device ifdefs (Rasmus Andersen)
o Fix qla1280 handling of registration failure (Rasmus Andersen
Rakesh Rakesh)
o Config include fixes (Niels Jensen)
o MatroxFB updates (Petr Vandrovec)
o Tidy fat_read_super to use get_hardsect_size (Tigran Aivazian)
o Fix m68k bitops ffs() (Geert Uytterhoeven)
o Fix ip_nat_standalone ksyms stuff (Rusty Russell)
o Fix copy_from_user mishandling in ip_fw_compat (Rusty Russell)
o Fix romfs for 2.4ac maxbytes (Mike Galbraith)
o filemap/aging updates (Rik van Riel)
o Enable device before reading irq in ne2k-pci (Martin Diehl)
o Remove surplus nr_ioapics definition (Rasmus Andersen)
o S/390 build fixes (Florian Laroche)
o Advansys driver fixes/portability (Arnaldo Carvalho
de Melo)
o Fix out of message handling error in i2o_block (Jason Lai)
o Fix bit granularity of 32 in ACPI driver (Adam J Richter)
o Fix unsafe casting for ARM on NFS root mount (Russell King)
o Fix mxcsr masking on pentium IV (Doug Ledford)
o Update u14/eata drivers to 6.03 (Dario Ballabio)
o Fix signed/unsigned mess in sysctl handlers (me)
---
Alan Cox <[email protected]>
Red Hat Kernel Hacker
& Linux 2.2 Maintainer Brainbench MVP for TCP/IP
http://www.linux.org.uk/diary http://www.brainbench.com
On Thu, 1 Mar 2001, Maciej W. Rozycki wrote:
> > o Handle broken PIV MP tables with a NULL ioapic
>
> That's not a right fix. [...]
Maciej, it *is* the right fix. These are UP systems not SMP systems, but
if we boot an SMP kernel then we find a (largely bogus) mptable during the
scan.
Any BIOS of a real SMP box that is so blatantly broken to specify a NULL
ioapic in the mptable deserves SMP mode being disabled altogether.
lets not overcomplicate things.
Ingo
On Thu, 1 Mar 2001, Alan Cox wrote:
> o Handle broken PIV MP tables with a NULL ioapic
That's not a right fix. We should make a check in MP_ioapic_info() and
do not register bogus I/O APICs (hmm, I wonder what the next thing to be
broken in MP-tables is...). We should handle the no I/O APIC case around
setup_IO_APIC() then. This would be similar to specifying "noapic" in
the command line. There is absolutely no need to disable SMP support if
there is no I/O APIC -- we don't insist on having it. We are able to
route interrupts through 8259A controllers if needed (we'd better avoid it
if at all possible due to various chip errata, though).
I'll implement the idea together with my pending APIC clean-ups.
We don't handle P4-compatible I/O APICs at the moment, anyway...
Maciej
--
+ Maciej W. Rozycki, Technical University of Gdansk, Poland +
+--------------------------------------------------------------+
+ e-mail: [email protected], PGP key available +
On Thu, 1 Mar 2001, Ingo Molnar wrote:
> > > o Handle broken PIV MP tables with a NULL ioapic
> >
> > That's not a right fix. [...]
>
> Maciej, it *is* the right fix. These are UP systems not SMP systems, but
> if we boot an SMP kernel then we find a (largely bogus) mptable during the
> scan.
I disagree. It's just a dirty hack and it obscures the APIC code even
more than it already is. I propose to make it cleanly. Please let me do
some code and we may get back to the discussion then.
> Any BIOS of a real SMP box that is so blatantly broken to specify a NULL
> ioapic in the mptable deserves SMP mode being disabled altogether.
I suppose such BIOS doesn't exist and isn't going to. An SMP
configuration with no I/O APIC is legal from the hw point of view though
and it's sane (modulo errata), even if not permitted by the MPS. We may
handle it for free and we will handle UP systems with an MP-table and no
APIC automatically as well.
> lets not overcomplicate things.
Sure -- I just want to simplify them. :-)
Maciej
--
+ Maciej W. Rozycki, Technical University of Gdansk, Poland +
+--------------------------------------------------------------+
+ e-mail: [email protected], PGP key available +
On Thursday, 01 March 2001, at 01:31:10 +0000,
Alan Cox wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/alan/2.4/
>
> 2.4.2-ac7
> o Fix the non booting winchip/cyrix problem (me)
>
Linux 2.4.2-ac7 reports wrong CPU speed and model name for a Pentium III
correctly detected on, at least, 2.2.18, 2.4.2 and 2.4.2-ac4. The
processor is a 600 MHz one, with a 133 MHz front bus.
Linux 2.2.18
------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 598.475
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat p
se36 mmx fxsr xmm
bogomips : 1192.75
Linux 2.4.2-ac4
---------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 598.481
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat p
se36 mmx fxsr sse
bogomips : 1192.75
Linux 2.4.2-ac7
---------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Heavily Overclocked Pentium III (Katmai) (300Mhz/66Mhz
FSB)
stepping : 3
cpu MHz : 598.495
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat p
se36 mmx fxsr sse
bogomips : 1192.75
--
Jos? Luis Domingo L?pez
Linux Registered User #189436 Debian GNU/Linux Potato (P166 64 MB RAM)
jdomingo AT internautas DOT org => Spam at your own risk
On Thu, 1 Mar 2001, Jos? Luis Domingo L?pez wrote:
> Linux 2.4.2-ac7 reports wrong CPU speed and model name for a Pentium III
> correctly detected on, at least, 2.2.18, 2.4.2 and 2.4.2-ac4. The
> processor is a 600 MHz one, with a 133 MHz front bus.
same here with PIII550MHz/100MHz bus. Actually, it is wrong in 2.4.2-ac6
as well -- don't know about ac5:
here is info from bootlog:
NT 05
Int: type 0, pol 0, trig 0, bus 3, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 3, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 3, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 3, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 3, IRQ 0a, APIC ID 2, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 3, IRQ 0b, APIC ID 2, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 3, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 3, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 3, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 3, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 11
Int: type 0, pol 3, trig 3, bus 0, IRQ 28, APIC ID 2, APIC INT 12
Int: type 0, pol 3, trig 3, bus 0, IRQ 29, APIC ID 2, APIC INT 12
Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 10
Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10
Int: type 0, pol 3, trig 3, bus 2, IRQ 10, APIC ID 2, APIC INT 13
Int: type 0, pol 3, trig 3, bus 2, IRQ 14, APIC ID 2, APIC INT 10
Int: type 2, pol 3, trig 1, bus 3, IRQ 00, APIC ID 2, APIC INT 17
Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Kernel command line: auto BOOT_IMAGE=242-ac6 ro root=341 BOOT_FILE=/boot/vmlinuz-2.4.2-ac6 video=matrox:vesa:0x118 parport=0x378,7 console=ttyS1,38400 console=tty0 nmi_watchdog=0
Initializing CPU#0
Detected 548.547 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1094.45 BogoMIPS
Memory: 1026616k/1048512k available (1855k kernel code, 21508k reserved, 477k data, 248k init, 131008k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU speed 363Mhz, Bus Speed 66MHz
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU speed 363Mhz, Bus Speed 66MHz
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Katmai) stepping 03
per-CPU timeslice cutoff: 1462.42 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: 3
Booting processor 1/1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
Startup point 1.
CPU#1 (phys ID: 1) waiting for CALLOUT
Waiting for send to finish...
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1094.45 BogoMIPS
Stack at about c221dfbc
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU speed 363Mhz, Bus Speed 66MHz
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
OK.
CPU1: Intel Pentium III (Katmai) stepping 03
CPU has booted.
Before bogomips.
Total of 2 processors activated (2188.90 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2 ... ok.
Synchronizing Arb IDs.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=49 pin1=2 pin2=0
number of MP IRQ sources: 24.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 003 03 1 1 0 1 0 1 1 B9
13 003 03 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 548.5637 MHz.
..... host bus clock speed is 99.7387 MHz.
cpu: 0, clocks: 997387, slice: 332462
CPU0<T0:997376,T1:664912,D:2,S:332462,C:997387>
cpu: 1, clocks: 997387, slice: 332462
CPU1<T0:997376,T1:332448,D:4,S:332462,C:997387>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI->APIC IRQ transform: (B0,I9,P0) -> 17
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P0) -> 19
PCI->APIC IRQ transform: (B2,I5,P0) -> 16
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
IA-32 Microcode Update Driver: v1.08 <[email protected]>
Starting kswapd v1.8
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
matroxfb: Matrox Millennium G200 (AGP) detected
matroxfb: MTRR's turned on
matroxfb: 1024x768x32bpp (virtual: 1024x2047)
matroxfb: framebuffer at 0xEE000000, mapped to 0xf8805000, size 8388608
Console: switching to colour frame buffer device 128x48
fb0: MATROX VGA frame buffer device
pty: 256 Unix98 ptys configured
Linux video capture interface: v1.00
block: queued sectors max/low 682322kB/551250kB, 2048 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST328040A, ATA DISK drive
hdb: IBM-DTLA-307075, ATA DISK drive
hdc: QUANTUM FIREBALL ST6.4A, ATA DISK drive
hdd: Maxtor 96147U8, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 55704096 sectors (28520 MB) w/512KiB Cache, CHS=3467/255/63, UDMA(33)
hdb: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=148945/16/63, UDMA(33)
hdc: 12594960 sectors (6449 MB) w/81KiB Cache, CHS=13328/15/63, UDMA(33)
hdd: 120060864 sectors (61471 MB) w/2048KiB Cache, CHS=119108/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hda2: <bsd: hda8 hda9 hda10 >
hda3: <unixware: hda11 hda12 hda13 hda14 hda15 hda16 hda17 hda18 >
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 >
hdc: [PTBL] [784/255/63] hdc1
hdd: [PTBL] [7473/255/63] hdd1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne.c:v1.10 9/23/94 Donald Becker ([email protected])
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x300: 00 48 45 80 6d 38
eth0: NE2000 found at 0x300, using IRQ 5.
loop: loaded (max 8 devices)
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
Non-volatile memory driver v1.1
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
eth1: Intel Corporation 82557 [Ethernet Pro 100], 00:D0:B7:61:37:E2, IRQ 19.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 711269-004, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
eth2: Intel Corporation 82557 [Ethernet Pro 100] (#2), 00:D0:B7:61:37:E3, IRQ 16.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 711269-004, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
i2c-core.o: driver i2c msp3400 driver registered.
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
bttv: driver version 0.7.57 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 00:0a.0, irq: 18, latency: 64, memory: 0xef102000
bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10
bttv0: model: BT878(Hauppauge new (bt878)) [autodetected]
bttv0: enabling 430FX/VP3 compatibilty
bttv0: Hauppauge msp34xx: reset line init
i2c-dev.o: Registered 'bt848 #0' as minor 0
tuner: chip found @ 0x61
bttv0: i2c attach [(unset)]
i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=38065, tuner=Philips FI1246 MK2 (1), radio=no
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on Intel 440BX @ 0xe0000000 64MB
[drm] Initialized mga 2.0.1 20000928 on minor 63
SCSI subsystem driver Revision: 1.00
(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/9/0
(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 415 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.3/5.2.0
<Adaptec AHA-294X SCSI host adapter>
Vendor: FUJITSU Model: M2684S-512 Rev: 2036
Type: Direct-Access ANSI SCSI revision: 02
Vendor: ARCHIVE Model: Python 04687-XXX Rev: 6610
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: IOMEGA Model: ZIP 100 Rev: J.03
Type: Direct-Access ANSI SCSI revision: 02
Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c
Type: CD-ROM ANSI SCSI revision: 04
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 5, lun 0
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: 1039329 512-byte hdwr sectors (532 MB)
sda: sda4 < sda5 sda6 >
SCSI device sdb: 196608 512-byte hdwr sectors (101 MB)
sdb: Write Protect is off
sdb: sdb4 < sdb5 sdb6 >
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
(scsi0:0:6:0) Synchronous at 10.0 Mbyte/sec, offset 15.
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
es1371: version v0.27 time 15:20:58 Feb 28 2001
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06
es1371: found es1371 rev 6 at io 0xe800 irq 16
es1371: features: joystick 0x0
ac97_codec: AC97 codec, id: 0x5452:0x4103 (TriTech TR28023)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP: Hash tables configured (established 32768 bind 43690)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 248k freed
Adding Swap: 1945904k swap-space (priority -1)
(scsi0:0:1:0) Synchronous at 6.67 Mbyte/sec, offset 15.
st0: Block limits 1 - 16777215 bytes.
> > Linux 2.4.2-ac7 reports wrong CPU speed and model name for a Pentium II=
> I
> > correctly detected on, at least, 2.2.18, 2.4.2 and 2.4.2-ac4. The
> > processor is a 600 MHz one, with a 133 MHz front bus.
The model name printing has not changed. Not at all.
> same here with PIII550MHz/100MHz bus. Actually, it is wrong in 2.4.2-ac6
> as well -- don't know about ac5:
Please send me the value of your 0x2A MTRR. Because this isnt properly intel
documented there is a certain amount of research still required.
363 / 66 would be a 66Mhz bus 5.5 multiplier. It got the multiplier right
but it appears the bus speed encoding may be different.
On Thu, 1 Mar 2001, Alan Cox wrote:
> Please send me the value of your 0x2A MTRR. Because this isnt properly intel
> documented there is a certain amount of research still required.
>
ok, adding this to init_intel():
u32 lo, hi;
rdmsr(0x2A, lo, hi);
printk(KERN_ERR "lo=%x hi=%x\n", lo, hi);
produces the output:
# dmesg | grep lo=
lo=c5100800 hi=0
lo=c5100800 hi=0
lo=c5000800 hi=0
Tigran
Alan,
Those formulae (both 'bus' and 'mul' calculation) are broken, I think.
If I extend 'bus' to be 4 bits instead of 2 then I can make it work on all
of my machines (or all those I tried), of course, extending the buscode[]
table appropriately.
However, the radically broken, imho, thing is that the (bus, mul) pair is
_not_ constant when I vary the bus/cpu speed settings in the "soft cpu
BIOS". If the bits of the 0x2A msr are supposed to be used for finding out
the "true" i.e. intended bus/cpu speeds (hence the label "overclocked" in
the code) then they should remain constant when one is overclocking,
right?
As for my question on the evenness of the calls to identify_cpu() --
ignore it, it was obvious, of course (called from check_bugs() on
boot_cpu_data and then on SMP on each cpu_data + id)
Regards,
Tigran
> ah, I see, so we are using the Reserved (14 upwards) bits of the
> MSR_EBC_HARD_POWERON? Ok, so the task is to understand how the bus info is
> encoded.
Well actually they are documented in part by some of the intel and other
docs. But all the docs agree on the bus speed encoding ...
> If I extend 'bus' to be 4 bits instead of 2 then I can make it work on all
> of my machines (or all those I tried), of course, extending the buscode[]
> table appropriately.
That would be interesting to see. Certainly the mul code got extended by a bit
later on
> However, the radically broken, imho, thing is that the (bus, mul) pair is
> _not_ constant when I vary the bus/cpu speed settings in the "soft cpu
> BIOS". If the bits of the 0x2A msr are supposed to be used for finding out
> the "true" i.e. intended bus/cpu speeds (hence the label "overclocked" in
> the code) then they should remain constant when one is overclocking,
> right?
The values are read from the poweron register. The values in that can be wrong
in certain cases. The real goal is to get the bus/multiplier values for the
processors on an SMP box reliably. In fact the 'overclocked' hack is probably
not something I'd feed to Linus
Ultimately we need this to detect SMP boxes where the cpus have different
multipliers, as we must disable the TSC in these cases.
Alan
> the bad news to this "rule" is that I just found one "exception". Namely,
> I have Celeron-600/100 and PentiumII-333/66 and both evaluate to
> bus/mul=0/0 even in 4bit bus representation which is impossible. So, this
> is my big stumbling block.... if you tell me how to overcome
> this, I can very quickly build buscode[] table that works on all other
> machines I have.
>
> also, a pointer to anything written down about bus encoding in 2E MSR
> would be nice.
Cyrix III samuel data book
Mobile Intel(R) Pentium III Processor in BGA2 and ,,
[24940903.pdf]
Table 14 in paticular gives the config bits
This also implies a bus selection table of
00 66MHz
01 100Mhz
10 Reserved
11 133 Mhz
On Fri, 2 Mar 2001, Alan Cox wrote:
> [24940903.pdf]
> Table 14 in paticular gives the config bits
ok, thank you. Now I understand (maybe) whats' going on. Linux treated
bits 22,23,24,25 but ignored 27 which it shouldn't have. Now, coupled with
the fact that the problematic box I have (Celeron) has that bit 27 set
suggests that we ought to extend mult[] table appropriately. The values
for that Celeron do not match anything in the Table 14 so we have to
extend mult[] emprirically. (so I now come back to the idea of 4bit
representation of 'bus').
I will stop here/now but I will definitely come back to this interesting
problem in 24 hours. But if anyone fixes it before then, I won't cry :)
Of course, before sending anything I will make sure my patch works on
_all_ my machines without any exceptions.
Regards,
Tigran