ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
trees, maintained by Jean Delvare.
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the
mm-commits mailing list.
echo "subscribe mm-commits" | mail [email protected]
- If you hit a bug in -mm and it is not obvious which patch caused it, it is
most valuable if you can perform a bisection search to identify which patch
introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and
reboots), so consider reporting the bug first and if we cannot immediately
identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing
list on any email.
- When reporting bugs in this kernel via email, please also rewrite the
email Subject: in some manner to reflect the nature of the bug. Some
developers filter by Subject: when looking for messages to read.
- Semi-daily snapshots of the -mm lineup are uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on
the mm-commits list.
Changes since 2.6.19-rc1-mm1:
origin.patch
git-alsa.patch
git-agpgart.patch
git-cpufreq.patch
git-dvb.patch
git-gfs2.patch
git-ia64.patch
git-ieee1394.patch
git-infiniband.patch
git-input.patch
git-jfs.patch
git-libata-all.patch
git-mtd.patch
git-netdev-all.patch
git-ocfs2.patch
git-pcmcia.patch
git-pciseg.patch
git-s390.patch
git-scsi-misc.patch
git-scsi-target.patch
git-qla3xxx.patch
git-watchdog.patch
git-cryptodev.patch
git-gccbug.patch
git trees
-revert-nvidiafb-use-generic-ddc-reading.patch
-null-dereference-in-fs-jbd-journalc.patch
-irq-fix-avr32-breakage.patch
-mm-use-symbolic-names-instead-of-indices-for-zone-initialisation.patch
-mm-remove-memmap_zone_idx.patch
-fix-menuconfig-build-failure-due-to-missing-stdboolh.patch
-user-struct-irq_chip-instead-of-struct-hw_interrupt_type.patch
-disable-detect_softlockup-for-s390.patch
-ext4-copy.patch
-ext4-rename.patch
-ext4-enable.patch
-jbd2-copy.patch
-jbd2-rename.patch
-jbd2-rename-slab.patch
-jbd2-enable.patch
-jbd2-cleanup.patch
-ext4-extents.patch
-ext4_fsblk_sector_t.patch
-ext4-extents-48bit.patch
-ext4-unitialized-extent-handling.patch
-extents_comment_fix.patch
-64bit_jbd2_core.patch
-sector_t-jbd2.patch
-ext4_48bit_i_file_acl.patch
-64bit-metadata.patch
-ext4_blk_type_from_sector_t_to_ulonglong.patch
-ext4_blk_type_from_sector_t_to_ulonglong-fix.patch
-ext4_remove_sector_t_bits_check.patch
-jbd2_blks_type_from_sector_t_to_ull.patch
-ext4_allow_larger_descriptor_size.patch
-ext4_move_block_number_hi_bits.patch
-ext4-uninline-ext4_get_group_no_and_offset.patch
-ext4-64-bit-divide-fix.patch
-ext4-64-bit-divide-fix-fix.patch
-ext4-rename-logic_sb_block.patch
-ext4-errors-behaviour-fix.patch
-ext4-whitespace-cleanups.patch
-acpi-fix-section-for-cpu-init-functions.patch
-acpi-fix-printk-format-warnings.patch
-acpi-sci-interrupt-source-override.patch
-asus_acpi-fix-proc-files-parsing.patch
-asus_acpi-dont-printk-on-writing-garbage-to-proc-files.patch
-acpi-check-if-parent-is-on-dock.patch
-fix-incorrect-handling-of-pci-express-root-bridge-_hid.patch
-acpi-preserve-correct-battery-state-through-suspend-resume-cycles.patch
-acpi-preserve-correct-battery-state-through-suspend-resume-cycles-tidy.patch
-fs-bioc-tweaks.patch
-git-cifs.patch
-git-cifs-fixup.patch
-cifs-kconfig-dont-select-connector.patch
-fix-gregkh-driver-nozomi.patch
-w1-kconfig-fix.patch
-fs-partitions-check-add-sysfs-error-handling.patch
-char-nozomi-use-tty_wakeup.patch
-pci_module_init-convertion-in-amso1100-driver.patch
-drivers-infiniband-hw-amso1100-c2_rnicc-fix-a-null-dereference.patch
-remove-silly-messages-from-input-layer.patch
-input-i8042-disable-keyboard-port-when-panicking-and-blinking.patch
-libata-add-40pin-short-cable-support-honour-drive.patch
-pci_module_init-convertion-in-ata_genericc.patch
-pci_module_init-convertion-in-ata_genericc-fix.patch
-pci_module_init-conversion-for-pata_pdc2027x.patch
-libata-return-sense-data-in-hdio_drive_cmd-ioctl.patch
-libata-return-sense-data-in-hdio_drive_cmd-ioctl-tidy.patch
-b44-fix-eeprom-endianess-issue.patch
-forcedeth-power-management-support.patch
-forcedeth-power-management-support-tidy.patch
-remove-unnecessary-check-in-drivers-net-depcac.patch
-pci_module_init-convertion-in-olympicc.patch
-ibmveth-irq-fix.patch
-off-by-one-in-arch-ppc-platforms-mpc8.patch
-ehea-firmware-interface-based-on-anton-blanchards-new-hvcall-interface.patch
-pci-optionally-sort-device-lists-breadth-first-tweaks.patch
-pci-optionally-sort-device-lists-breadth-first-force-on.patch
-gregkh-usb-usb-serial-mos7720.patch
-sound-usb-usbaudio-handle-return-value-of-usb_register.patch
-drivers-usb-net-use-build_bug_on.patch
-mm-kevent-threads-use-mpol_default.patch
-move-rmap-bug_on-outside-debug_vm.patch
-fix-do_mbind-warning-with-config_migration=n.patch
-mm-arch_free_page-fix.patch
-mm-locks_freed-fix.patch
-swsusp-use-suspend_console.patch
-uml-revert-wrong-patch.patch
-uml-correct-removal-of-pte_mkexec.patch
-uml-readd-forgot-prototype.patch
-uml-make-tt-mode-compile-after-setjmp-related-changes.patch
-uml-make-uml_setjmp-always-safe.patch
-uml-fix-processor-selection-to-exclude-unsupported-processors-and-features.patch
-uml-fix-uname-under-setarch-i386.patch
-uml-declare-in-kconfig-our-partial-lockdep-support.patch
-uml-allow-using-again-x86-x86_64-crypto-code.patch
-uml-asm-offsets-duplication-removal.patch
-uml-remove-duplicate-export.patch
-uml-deprecate-config_mode_tt.patch
-uml-allow-finer-tuning-for-host-vmsplit-setting.patch
-add-address_space_operationsbatch_write.patch
-pass-io-size-to-batch_write-address-space-operation.patch
-bluetooth-guard-bt_proto-with-rwlock.patch
-bluetooth-use-gfp_atomic-in-_sock_creates-sk_alloc.patch
-remove-the-old-bd_mutex-lockdep-annotation.patch
-new-bd_mutex-lockdep-annotation.patch
-add-config_headers_check-option-to-automatically-run-make-headers_check.patch
-add-config_headers_check-option-to-automatically-run-make-headers_check-nobble.patch
-epoll_pwait.patch
-adds-carta_random32-library-routine.patch
-grow_buffers-infinite-loop-fix.patch
-ide-generic-jmicron-fix.patch
-fix-module-taint-flags-listing-in-oops-panic.patch
-ext3-errors-behaviour-fix.patch
-ext2-errors-behaviour-fix.patch
-tpm-fix-error-handling.patch
-sched-likely-profiling.patch
-invalidate_inode_pages2_range-debug.patch
-x86-microcode-handle-sysfs-error.patch
-32-bit-compatibility-hdio-ioctls.patch
-bitmap-parse-input-from-kernel-and-user-buffers-2.patch
-document-the-core-dump-to-a-pipe-patch.patch
-vm-fix-the-gfp_mask-in-invalidate_complete_page2.patch
-posix-cpu-timers-prevent-signal-delivery-starvation.patch
-remove-unnecessary-check-in-fs-fat-inodec.patch
-d-cache-aliasing-issue-in-__block_prepare_write.patch
-use-linux-ioh-instead-of-asm-ioh.patch
-consolidate-check_signature.patch
-fix-typos-in-mm-shmem_aclc.patch
-ht_irq-must-depend-on-pci.patch
-fs-use-build_bug_on.patch
-dac960-use-memmove-for-overlapping-areas.patch
-lockdep-use-build_bug_on.patch
-fix-lockdep-designtxt.patch
-lockdep-fix-printk-recursion-logic.patch
-kernel-doc-fix-function-name-in-usercopyc.patch
-uaccessh-match-kernel-doc-and-function-names.patch
-kernel-doc-drop-various-inline-qualifiers.patch
-include-linux-typesh-in-linux-nbdh.patch
-kernel-doc-make-parameter-description-indentation-uniform.patch
-dell_rbu-printk-warning-fix.patch
-reiserfs-make-sure-all-dentries-refs-are-released-before-calling-kill_block_super-try-2.patch
-autofs-make-sure-all-dentries-refs-are-released-before-calling-kill_anon_super.patch
-vfs-destroy-the-dentries-contributed-by-a-superblock-on-unmounting.patch
-knfsd-add-nfs-export-support-to-tmpfs.patch
-md-use-build_bug_on.patch
-squash-transmeta-warnings.patch
Merged into mainline or a subsystem tree.
+e100-fix-reboot-f-with-netconsole-enabled.patch
+ioc4-remove-sn2-feature-and-config-dependencies.patch
+ioc4-enable-build-on-non-sn2.patch
+ioc4-enable-build-on-non-sn2-fix-2.patch
+ioc4-fixes.patch
+ioc4-kconfig-fix.patch
+synclink-remove-page_size-reference.patch
+lockdep-increase-max-allowed-recursion-depth.patch
+new-mmc-maintainer.patch
+i386-time-avoid-pit-smp-lockups.patch
+null-dereference-in-fs-jbd2-journalc.patch
+remove_mapping-fix.patch
+md-fix-proc-mdstat-refcounting.patch
+posix-cpu-timers-prevent-signal-delivery-starvation.patch
+proc_numbuf-is-wrong.patch
+direct-io-sync-and-invalidate-file-region-when-falling-back-to-buffered-write.patch
+rename-net_random-to-random32.patch
+rename-net_random-to-random32-fixes.patch
+rename-net_random-to-random32-fix-2.patch
+remove-carta_random32.patch
+knfsd-add-nfs-export-support-to-tmpfs.patch
+w1-kconfig-fix.patch
+rtc-max6902-month-conversion-fix.patch
+vmalloc-dont-pass-__gfp_zero-to-slab.patch
+acpi_processor_latency_notifier-up-warning-fix.patch
+swsusp-fix-memory-leaks.patch
+drivers-char-specialixc-fix-the-baud-conversion.patch
+fix-make-headers_install.patch
+genirq-clean-up-irq-flow-type-naming.patch
+sx-fix-user-visible-typo-devic.patch
+fuse-fix-hang-on-smp.patch
+document-i_size_write-locking-rules.patch
+fuse-locking-fix-for-nlookup.patch
+fuse-fix-spurious-bug.patch
+fuse-fix-handling-of-moved-directory.patch
+fuse-fix-dereferencing-dentry-parent.patch
+knfsd-nfsd4-fix-owner-override-on-open.patch
+knfsd-nfsd4-fix-open-permission-checking.patch
+knfsd-nfsd4-fix-error-handling-in-nfsds-callback-client.patch
+knfsd-fix-bug-in-recent-lockd-patches-that-can-cause-reclaim-to-fail.patch
+knfsd-allow-lockd-to-drop-replys-as-appropriate.patch
+knfsd-allow-lockd-to-drop-replys-as-appropriate-fixes.patch
+revert-generic_file_buffered_write-handle-zero-length-iovec-segments.patch
+revert-generic_file_buffered_write-deadlock-on-vectored-write.patch
+generic_file_buffered_write-cleanup.patch
+mm-comment-mmap_sem--lock_page-lockorder.patch
+mm-only-mm-debug-write-deadlocks.patch
+mm-fix-pagecache-write-deadlocks.patch
+mm-fix-pagecache-write-deadlocks-comment.patch
2.6.19 queue (mostly)
+add-support-for-the-generic-backlight-device-to-the-ibm-acpi-driver.patch
+add-support-for-the-generic-backlight-device-to-the-ibm-acpi-driver-fix.patch
+add-support-for-the-generic-backlight-device-to-the-asus-acpi-driver.patch
+add-support-for-the-generic-backlight-device-to-the-toshiba-acpi-driver.patch
+acpi-cpufreq-remove-dead-code.patch
ACPI things.
+cpufreq-handle-sysfs-errors.patch
+speedstep-centrino-remove-dead-code.patch
cpufreq fixes.
+gregkh-driver-driver-core-kmalloc-failure-check-in-driver_probe_device.patch
+gregkh-driver-driver-link-sysfs-timing.patch
-gregkh-driver-driver-link-sysfs-timing.patch
Driver tree updates.
+revert-gregkh-driver-driver-core-fixes-sysfs_create_group-retval-in-topology.c.patch
Drop a bad patch.
+driver-core-dont-ignore-bus_attach_device-retval.patch
+cpu-topology-consider-sysfs_create_group-return-value.patch
Driver core fixes.
+git-dvb-fixup.patch
Fix rejects in git-dvb.patch
+jdelvare-i2c-i2c-scx200_acb-handle-pci-errors.patch
+jdelvare-i2c-i2c-documentation-typos.patch
+jdelvare-i2c-i2c-kill-icspll-driver-id.patch
+jdelvare-i2c-i2c-delete-ite-bus-driver.patch
+jdelvare-i2c-i2c-pnx-new-driver.patch
+jdelvare-i2c-i2c-ibm_iic-add_request_release_mem_region.patch
+jdelvare-i2c-i2c-nforce2-cleanup.patch
i2c tree
+jdelvare-hwmon-hwmon-unchecked-return-status-fixes-w83791d.patch
+jdelvare-hwmon-hwmon-update-Grant-Coady-email-address.patch
+jdelvare-hwmon-hwmon-documentation-typos.patch
+jdelvare-hwmon-hwmon-smsc47m112-documentation.patch
+jdelvare-hwmon-hwmon-k8temp-documentation-update.patch
+jdelvare-hwmon-hwmon-w83627ehf-fix-fan5-detection.patch
+jdelvare-hwmon-hwmon-w83781d-lm78-fix-load-failure.patch
+jdelvare-hwmon-hwmon-w83781d-fix-debug-messages.patch
+jdelvare-hwmon-hwmon-unchecked-return-status-fixes-abituguru.patch
+jdelvare-hwmon-hwmon-f71805f-add-fanctl-1-prepare.patch
+jdelvare-hwmon-hwmon-f71805f-add-fanctl-2-manual-mode.patch
+jdelvare-hwmon-hwmon-f71805f-add-fanctl-3-pwm-freq.patch
+jdelvare-hwmon-hwmon-f71805f-add-fanctl-4-pwm-mode.patch
+jdelvare-hwmon-hwmon-f71805f-add-fanctl-5-speed-mode.patch
+jdelvare-hwmon-hwmon-f71805f-add-fanctl-6-documentation.patch
+jdelvare-hwmon-hwmon-pc87360-set-vrm-using-hwmon-vid-routine.patch
+jdelvare-hwmon-hwmon-hdaps-dmi-detection-data-to-data-section.patch
+jdelvare-hwmon-hwmon-hdaps-BIOS-note.patch
+jdelvare-hwmon-hwmon-it87-drop-smbus-interface-support.patch
+jdelvare-hwmon-hwmon-pc87427-new-driver.patch
hwmon tree
-hdapsc-inversion-of-each-axis.patch
-hdaps-remove-duplicate-whitelist-entry-and-add-thinkpad.patch
Dropped (I think)
+ia64-remove-unused-pal_call_ic_off.patch
+ia64-reformat-pals-to-fit-in-80-columns-fix-typos.patch
ia64 fixes.
+input-handle-sysfs-errors.patch
+input-drivers-handle-sysfs-errors.patch
input updates.
+intel-fb-switch-to-pci_get-api.patch
intelfb fixlet.
+ahci-readability-tweak.patch
+libata-sff-allow-for-wacky-systems.patch
+libata-revamp-blacklist-support-to-allow-multiple-kinds.patch
+pata_marvell-marvell-6101-6145-pata-driver.patch
ata/pata things.
+drivers-mmcmisc-handle-pci-errors-on-resume.patch
MMC fixlets.
-mtd-maps-add-parameter-to-amd76xrom-to-override-rom-window-size-if-set-incorrectly-by-bios-tweak.patch
Folded into mtd-maps-add-parameter-to-amd76xrom-to-override-rom-window-size-if-set-incorrectly-by-bios.patch
-mtd-maps-support-for-bios-flash-chips-on-intel-esb2-southbridge-tidy.patch
-mtd-maps-support-for-bios-flash-chips-on-intel-esb2-southbridge-fix.patch
Folded into mtd-maps-support-for-bios-flash-chips-on-intel-esb2-southbridge.patch
+jffs2-use-rb_first-and-rb_last-cleanup.patch
+mtd-fix-comment-typo-devic.patch
+esb2rom-use-hotplug-safe-interfaces.patch
MTD/JFFS2 updates
+ibmveth-fix-index-increment-calculation.patch
net driver fix.
+drivers-dma-handle-sysfs-errors.patch
+atm-firestream-handle-thrown-error.patch
+wan-pc300-handle-propagate-minor-errors.patch
+net-atm-handle-sysfs-errors.patch
+com20020-build-fix.patch
+nicstar-fix-a-bogus-casting-warning.patch
+resend-iphase-64bit-cleanup.patch
net-related things.
-nfs-add-return-code-checks-for-page-invalidation.patch
Dropped.
+bug-nfsd-nfs4xdrc-misuse-of-err_ptr.patch
+fix-svc_procfunc-declaration.patch
+lockd-endianness-annotations.patch
+xdr-annotations-nfsv2.patch
+xdr-annotations-nfsv3.patch
+xdr-annotations-nfsv4.patch
+xdr-annotations-nfs-readdir-entries.patch
+fs-nfs-callback-passes-error-values-big-endian.patch
+xdr-annotations-fs-nfs-callback.patch
+nfs-verifier-is-network-endian.patch
+xdr-annotations-mount_clnt.patch
+nfs_common-endianness-annotations.patch
+nfsd-nfserrno-endianness-annotations.patch
+nfsfh-simple-endianness-annotations.patch
+xdr-annotations-nfsd_dispatch.patch
+xdr-annotations-nfsv2-server.patch
+xdr-annotations-nfsv3-server.patch
+xdr-annotations-nfsv4-server.patch
+nfsd-vfsc-endianness-annotations.patch
+nfsd-nfs4-code-returns-error-values-in-net-endian.patch
+nfsd-nfsv23-trivial-endianness-annotations-for-error-values.patch
+nfsd-nfsv4-errno-endianness-annotations.patch
+xdr-annotations-nfsd-callback.patch
+nfsd-misc-endianness-annotations.patch
+nfsd-nfs_replay_me.patch
NFS/NFSD updates
+perle-multimodem-card-pci-ras-detection.patch
+pcmcia-handle-sysfs-pci-errors.patch
PCMCIA things.
+make-sure-uart-is-powered-up-when-dumping-mctrl-status.patch
+serial-handle-pci_enable_device-failure-upon-resume.patch
Serial stuff (nacked, actually)
+gregkh-pci-pci-check-that-mwi-bit-really-did-get-set.patch
+gregkh-pci-pci-use-pci_generic_prep_mwi-on-ia64.patch
+gregkh-pci-pci-use-pci_generic_prep_mwi-on-sparc64.patch
+gregkh-pci-pci-replace-have_arch_pci_mwi-with-pci_disable_mwi.patch
+gregkh-pci-pci-delete-unused-extern-in-powermac-pci.c.patch
PCI tree updates.
+revert-gregkh-pci-pci-check-that-mwi-bit-really-did-get-set.patch
Weed badness out of the PCI tree
+reset-pci-device-state-to-unknown-state-for-resume.patch
+pci-additional-functions.patch
PCI stuff.
+scsi-minor-bug-fixes-and-cleanups.patch
+mpt-fusion-handle-pci-layer-error-on-resume.patch
+scsi-aha1740-handle-scsi-api-errors.patch
+scsi-qla2xxx-handle-sysfs-errors.patch
+drivers-scsi-ncr5380c-replacing-yield-with-a.patch
+drivers-scsi-megaraidc-replacing-yield-with-a.patch
+switch-fdomain-to-the-pci_get-api.patch
SCSI updates.
+gregkh-usb-uhci-workaround-for-asus-motherboard.patch
+gregkh-usb-usbcore-fix-refcount-bug-in-endpoint-removal.patch
+gregkh-usb-usbcore-fix-endpoint-device-creation.patch
+gregkh-usb-usb-drivers-usb-net-use-build_bug_on.patch
+gregkh-usb-usb-devio-handle-class_device_create-error.patch
+gregkh-usb-mcs7830-driver-3.diff.patch
+gregkh-usb-usbnet-ethtool-mii.diff.patch
+gregkh-usb-usbnet-phy-mutex.diff.patch
+gregkh-usb-usb-move-vibrator.patch
+gregkh-usb-usb-serial-mos7720.patch
+gregkh-usb-usb-takes-31-devices-per-hub.patch
+gregkh-usb-usb-hub-root-hub-code-takes-more-than-15-devices.patch
USB tree updates.
-xpad-dance-pad-support-tidy.patch
Folded into xpad-dance-pad-support.patch
+ueagle-fix-ueagle-atm-oops.patch
+usb-gadget-net2280-handle-sysfs-errors.patch
USB things.
+airoc-check-returned-values.patch
wireless driver fixlets.
-spinlock-debug-all-cpu-backtrace-fix.patch
-spinlock-debug-all-cpu-backtrace-fix-2.patch
-spinlock-debug-all-cpu-backtrace-fix-3.patch
Folded into spinlock-debug-all-cpu-backtrace.patch
+i386-espfix-cleanup-tweak.patch
Fix i386-espfix-cleanup.patch
+x86-64-mmconfig-missing-printk-levels.patch
+i386-fix-cfi_signal_frame-copy-n-paste-error.patch
+x86_64-fix-obscure-oops-in-xfrm_register_mode.patch
x86 things.
+i386-use-asm-offsets-for-the-offsets-of-registers-into-the-pt_regs-struct-rather-than-having-hard-coded-constants.patch
+i386-pda-basic-definitions-for-i386-pda.patch
+i386-pda-initialize-the-per-cpu-data-area.patch
+i386-pda-initialize-the-per-cpu-data-area-voyager-fix.patch
+i386-pda-use-%gs-as-the-pda-base-segment-in-the-kernel.patch
+i386-pda-fix-places-where-using-%gs-changes-the-usermode-abi.patch
+i386-pda-update-sys_vm86-to-cope-with-changed-pt_regs-and-%gs-usage.patch
+i386-pda-implement-smp_processor_id-with-the-pda.patch
+i386-pda-implement-current-with-the-pda.patch
+i386-pda-store-the-interrupt-regs-pointer-in-the-pda.patch
Use the i386 gs register for the accessing per-cpu data.
-touchkit-ps-2-touchscreen-driver-configh.patch
-touchkit-ps-2-touchscreen-driver-regs-fix.patch
Folded into touchkit-ps-2-touchscreen-driver.patch
+memory-page-alloc-minor-cleanups-fix.patch
Folded into memory-page-alloc-minor-cleanups.patch
+__unmap_hugepage_range-add-comment.patch
MM comment.
+optional-zone_dma-in-the-vm-no-gfp_dma-check-in-the-slab-if-no-config_zone_dma-is-set.patch
Fix optional-zone_dma-in-the-vm.patch
+memory-page_alloc-zonelist-caching-speedup.patch
+oom-dont-kill-unkillable-children-or-siblings.patch
+oom-cleanup-messages.patch
+oom-less-memdie.patch
+mm-incorrect-vm_fault_oom-returns-from-drivers.patch
MM updates.
-shared-page-table-for-hugetlb-page-v4.patch
-htlb-forget-rss-with-pt-sharing.patch
Dropped.
+fix-bug-in-try_to_free_pages-and-balance_pgdat-when-they.patch
+balance_pdgat-cleanup.patch
+use-min-of-two-prio-settings-in-calculating-distress-for.patch
More MM updates.
+alpha-switch-to-pci_get-api.patch
Alpha fixlet.
+swsusp-improve-handling-of-highmem.patch
+swsusp-use-__gfp_wait.patch
swsusp updates.
+s390-qdio-build-fix.patch
s390 fix
-block-layer-early-detection-of-medium-not-present.patch
-scsi-core-and-sd-early-detection-of-medium-not-present.patch
-sd-early-detection-of-medium-not-present.patch
-scsi-early-detection-of-medium-not-present-updated.patch
Dropped.
-drivers-add-lcd-support.patch
-drivers-add-lcd-support-update.patch
+drivers-add-lcd-support-3.patch
+drivers-add-lcd-support-3-Kconfig-fix.patch
Updated
+ext2-fsid-for-statvfs.patch
+ext3-fsid-for-statvfs.patch
+ext4-fsid-for-statvfs.patch
+fix-io-error-reporting-on-fsync.patch
+drivers-led-handle-sysfs-errors.patch
+i2o-handle-a-few-sysfs-errors.patch
+fs-partitions-check-add-sysfs-error-handling.patch
+kernel-proc-kallsyms-reports-lower-case.patch
+rtc-fix-printk-of-64-bit-res-on-32-bit-platform.patch
+lockdep-annotate-i386-apm.patch
+i2o-more-error-checking.patch
+pnp-handle-sysfs-errors.patch
+rd-memory-leak-on-rd_init-failure.patch
+epca-prevent-panic-on-tty_register_driver-failure.patch
+rtc-handle-sysfs-errors.patch
+sound-oss-emu10k1-handle-userspace-copy-errors.patch
+spi-improve-sysfs-compiler-complaint-handling.patch
+kbuild-allow-multi-word-m-in-makefilemodpost.patch
+add-entrys-labels-to-tag-file.patch
+rt-mutex-fixup-rt-mutex-debug-code.patch
+ia64-fix-allmodconfig-build.patch
+convert-cpu-hotplug-notifiers-to-use-raw_notifier-instead-of-blocking_notifier.patch
+constify-inode-accessors.patch
+ide-complete-switch-to-pci_get.patch
+fuse-update-userspace-interface-to-version-78.patch
+fuse-minor-cleanup-in-fuse_dentry_revalidate.patch
+fuse-add-support-for-block-device-based-filesystems.patch
+fuse-add-blksize-option.patch
+fuse-add-bmap-support.patch
+fuse-add-destroy-operation.patch
+config_telclock-depends-on-x86.patch
+sysrq-x-show-blocked-tasks.patch
+remove-the-old-bd_mutex-lockdep-annotation.patch
+new-bd_mutex-lockdep-annotation.patch
+remove-lock_key-approach-to-managing-nested-bd_mutex-locks.patch
+simplify-some-aspects-of-bd_mutex-nesting.patch
+use-mutex_lock_nested-for-bd_mutex-to-avoid-lockdep-warning.patch
+avoid-lockdep-warning-in-md.patch
Misc patches.
-generic-implementatation-of-bug.patch
-generic-implementatation-of-bug-fix.patch
+generic-bug-implementation.patch
generic-bug-for-i386.patch
generic-bug-for-x86-64.patch
uml-add-generic-bug-support.patch
use-generic-bug-for-ppc.patch
bug-test-1.patch
Updated generic-BUG-handling patches.
+log2-implement-a-general-integer-log2-facility-in-the-kernel-vs-git-cryptodev.patch
Fix log2 patches in -mm.
+char-mxser_new-correct-intr-handler-proto.patch
+char-mxser_new-delete-ttys-and-termios.patch
+char-mxser_new-pci-probing.patch
+char-mxser_new-clean-macros.patch
+maintainers-add-me-to-isicom-mxser.patch
More updates to the new nxser driver.
+char-stallion-use-pr_debug-macro.patch
+char-stallion-remove-unneeded-casts.patch
+char-stallion-kill-typedefs.patch
+char-stallion-move-init-deinit.patch
+char-stallion-uninline-functions.patch
+char-stallion-mark-functions-as-init.patch
+char-stallion-remove-many-prototypes.patch
Stallion driver cleanups.
+drivers-isdn-hysdn-save_flags-cli-restore_flags-replaced-appropriately.patch
+drivers-isdn-isdnloop-save_flags-cli-restore_flags-replaced-appropriately.patch
+isdn-fix-drivers-by-handling-errors-thrown-by-readstat.patch
+isdn-check-for-userspace-copy-faults.patch
+drivers-isdn-ioremap-balanced-with-iounmap.patch
ISDN updates.
+ecryptfs-superblock-cleanups.patch
+ecryptfs-use-special_file.patch
ecryptfs updates.
-reiser4-write-via-do_sync_write.patch
-reiser4-rename-generic_sounding_globalspatch-fix.patch
+reiser4-get-rid-of-deprecated-crypto-api.patch
+reiser4-use-list_head-instead-of-struct-blocknr.patch
The reiser4 patches were redone.
+atyfb-rivafb-minor-fixes.patch
+igafb-switch-to-pci_get-api.patch
fbdev fixlets.
+md-conditionalize-some-code.patch
MD cleanup
+fdtable-implement-new-pagesize-based-fdtable-allocator-fix.patch
+fdtable-implement-new-pagesize-based-fdtable-allocator-bound-minimum-allocation-size.patch
+fdtable-implement-new-pagesize-based-fdtable-allocator-avoid-fdset-cacheline-ping-pong.patch
Fix and improve the fdtable patches in -mm.
+time-uninline-jiffiesh-fix.patch
Fix time-uninline-jiffiesh.patch
+round_jiffies-infrastructure.patch
+round_jiffies-infrastructure-fix.patch
+user-of-the-jiffies-rounding-patch-ata-subsystem.patch
+user-of-the-jiffies-rounding-code-jbd.patch
+user-of-the-jiffies-rounding-code-networking.patch
+user-of-the-jiffies-rounding-patch-slab.patch
Infrastructure to reduce the number of timer interrupts, and some
applications thereof.
+mutex-subsystem-synchro-test-module-fix.patch
Fix mutex-subsystem-synchro-test-module.patch
+mm-only-i_size_write-debugging.patch
Check for buggy i_size_write() callers.
All 875 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/patch-list
On Tue, 17 Oct 2006 00:03:56 -0700
"Miles Lane" <[email protected]> wrote:
> CC [M] drivers/usb/gadget/net2280.o
> drivers/usb/gadget/net2280.c: In function 'usb_gadget_register_driver':
> drivers/usb/gadget/net2280.c:2047: error: expected expression before 'do'
> drivers/usb/gadget/net2280.c:2049: error: expected expression before 'do'
> drivers/usb/gadget/net2280.c: In function 'net2280_probe':
> drivers/usb/gadget/net2280.c:2989: error: expected expression before 'do'
> drivers/usb/gadget/net2280.c:2972: warning: ignoring return value of
This, I guess:
--- a/drivers/usb/gadget/net2280.c~usb-gadget-net2280-handle-sysfs-errors-fix
+++ a/drivers/usb/gadget/net2280.c
@@ -1774,7 +1774,7 @@ static DEVICE_ATTR (queues, S_IRUGO, sho
#else
-#define device_create_file(a,b) do {} while (0)
+#define device_create_file(a,b) (0)
#define device_remove_file device_create_file
#endif
_
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc2-mm1
# Tue Oct 17 10:32:32 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="=panpancucul"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_KEVENT=y
CONFIG_KEVENT_USER_STAT=y
CONFIG_KEVENT_TIMER=y
CONFIG_KEVENT_POLL=y
CONFIG_KEVENT_SOCKET=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_TASK_XACCT is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_READAHEAD_ALLOW_OVERHEADS is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SECCOMP_DISABLE_TSC is not set
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_COMPAT_VDSO=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/sda6"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_MYRI10GE=m
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
# CONFIG_ACX is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=m
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_QUATECH_ESU100 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_K8 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Userspace I/O
#
CONFIG_UIO=m
#
# Auxiliary Display support
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
# CONFIG_EXT4DEV_FS_POSIX_ACL is not set
# CONFIG_EXT4DEV_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFS_DIRECTIO=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_AFS_FSCACHE is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp850"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_PROFILE_LIKELY is not set
CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_DEBUG_RODATA=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
On Tuesday, 17 October 2006 08:06, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>
[--snip--]
>
> +swsusp-improve-handling-of-highmem.patch
This patch needs the following small fix so that image_size is used
properly on systems with lots of highmem:
---
Fix swsusp to use image_size as documented on systems with lots of highmem.
Signed-off-by: Rafael J. Wysocki <[email protected]>
---
kernel/power/swsusp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6.19-rc2-mm1/kernel/power/swsusp.c
===================================================================
--- linux-2.6.19-rc2-mm1.orig/kernel/power/swsusp.c
+++ linux-2.6.19-rc2-mm1/kernel/power/swsusp.c
@@ -195,6 +195,7 @@ int swsusp_shrink_memory(void)
highmem_size = count_highmem_pages();
size = count_data_pages() + PAGES_FOR_IO;
tmp = size;
+ size += highmem_size;
for_each_zone (zone)
if (populated_zone(zone)) {
if (is_highmem(zone)) {
@@ -209,7 +210,6 @@ int swsusp_shrink_memory(void)
if (highmem_size < 0)
highmem_size = 0;
- size += highmem_size;
tmp += highmem_size;
if (tmp > 0) {
tmp = __shrink_memory(tmp);
Seeing this on a couple of x86_64's so far, probabally widespread:
BUG: warning at fs/inode.c:1389/i_size_write()
elm3b6:
Call Trace:
[<ffffffff8028207d>] i_size_write+0x51/0x73
[<ffffffff8028ddfb>] generic_commit_write+0x35/0x49
[<ffffffff802e78d1>] ext2_commit_chunk+0x32/0x6d
[<ffffffff802e86a0>] ext2_make_empty+0x160/0x179
[<ffffffff802eb734>] ext2_mkdir+0xb5/0x121
[<ffffffff80278926>] vfs_mkdir+0x6a/0xaa
[<ffffffff80278a12>] sys_mkdirat+0xac/0xfd
[<ffffffff80272607>] vfs_stat+0x14/0x16
[<ffffffff8021b703>] sys32_stat64+0x1a/0x34
[<ffffffff80278a76>] sys_mkdir+0x13/0x15
[<ffffffff8021b212>] ia32_sysret+0x0/0xa
This first one does not look so unreasonable, the inode is new and has
not yet been instantiated? But I'm no fs locking expert ...
BUG: warning at fs/inode.c:1389/i_size_write()
bl6-13:
Call Trace:
[<ffffffff80298a44>] i_size_write+0x45/0x57
[<ffffffff802a116b>] simple_commit_write+0x3b/0x47
[<ffffffff8028d96b>] __page_symlink+0xb5/0x150
[<ffffffff8030b742>] ramfs_symlink+0x4d/0xb7
[<ffffffff8028e547>] vfs_symlink+0xd4/0x144
[<ffffffff80290d4e>] sys_symlinkat+0x86/0xd2
[<ffffffff808e3c33>] do_header+0x70/0x1d2
[<ffffffff808e2bd5>] do_symlink+0x4b/0x7b
[<ffffffff808e2a55>] write_buffer+0x1d/0x2b
[<ffffffff808e2acf>] flush_window+0x6c/0xca
[<ffffffff808e3097>] inflate_codes+0x38f/0x3ec
[<ffffffff808e428a>] inflate_dynamic+0x4f5/0x541
[<ffffffff808e479a>] unpack_to_rootfs+0x4c4/0x923
[<ffffffff808e4c83>] populate_rootfs+0x8a/0xde
[<ffffffff8020715a>] init+0x114/0x346
[<ffffffff8020a925>] child_rip+0xa/0x15
[<ffffffff803e0d6e>] acpi_ds_init_one_object+0x0/0x82
[<ffffffff803e0d6e>] acpi_ds_init_one_object+0x0/0x82
[<ffffffff80207046>] init+0x0/0x346
[<ffffffff8020a91b>] child_rip+0x0/0x15
-apw
> +mm-fix-pagecache-write-deadlocks.patch
filemap_xip.c needs a fix also.
Signed-off-by: Cedric Le Goater <[email protected]>
---
mm/filemap_xip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
===================================================================
--- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
+++ 2.6.19-rc2-mm1/mm/filemap_xip.c
@@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
break;
}
- copied = filemap_copy_from_user(page, offset, buf, bytes);
+ copied = filemap_copy_from_user_atomic(page, offset, buf, bytes);
flush_dcache_page(page);
if (likely(copied > 0)) {
status = copied;
Andy Whitcroft wrote:
> Seeing this on a couple of x86_64's so far, probabally widespread:
>
> BUG: warning at fs/inode.c:1389/i_size_write()
>
> elm3b6:
>
> Call Trace:
> [<ffffffff8028207d>] i_size_write+0x51/0x73
> [<ffffffff8028ddfb>] generic_commit_write+0x35/0x49
> [<ffffffff802e78d1>] ext2_commit_chunk+0x32/0x6d
> [<ffffffff802e86a0>] ext2_make_empty+0x160/0x179
> [<ffffffff802eb734>] ext2_mkdir+0xb5/0x121
> [<ffffffff80278926>] vfs_mkdir+0x6a/0xaa
> [<ffffffff80278a12>] sys_mkdirat+0xac/0xfd
> [<ffffffff80272607>] vfs_stat+0x14/0x16
> [<ffffffff8021b703>] sys32_stat64+0x1a/0x34
> [<ffffffff80278a76>] sys_mkdir+0x13/0x15
> [<ffffffff8021b212>] ia32_sysret+0x0/0xa
>
> This first one does not look so unreasonable, the inode is new and has
> not yet been instantiated? But I'm no fs locking expert ...
I get something similar on x86 :
BUG: warning at fs/inode.c:1389/i_size_write()
[<c0102eb1>] dump_trace+0x63/0x1bf
[<c010301f>] show_trace_log_lvl+0x12/0x25
[<c0103559>] show_trace+0xd/0x10
[<c01035d0>] dump_stack+0x16/0x18
[<c0156c6f>] i_size_write+0x39/0x54
[<c0162050>] generic_commit_write+0x55/0x6b
[<c018fd0f>] ext2_commit_chunk+0x20/0x55
[<c018ffc6>] ext2_make_empty+0x14b/0x161
[<c0192d1d>] ext2_mkdir+0xa0/0xfe
[<c014db69>] vfs_mkdir+0x5a/0x9d
[<c014fb43>] sys_mkdirat+0x85/0xbb
[<c014fb89>] sys_mkdir+0x10/0x12
[<c01027fc>] syscall_call+0x7/0xb
DWARF2 unwinder stuck at syscall_call+0x7/0xb
It happens only once, when a first directory is created on / (ext2).
C,
On Tue, 17 Oct 2006 15:23:47 +0100
Andy Whitcroft <[email protected]> wrote:
> Seeing this on a couple of x86_64's so far, probabally widespread:
>
> BUG: warning at fs/inode.c:1389/i_size_write()
>
> elm3b6:
>
> Call Trace:
> [<ffffffff8028207d>] i_size_write+0x51/0x73
> [<ffffffff8028ddfb>] generic_commit_write+0x35/0x49
> [<ffffffff802e78d1>] ext2_commit_chunk+0x32/0x6d
> [<ffffffff802e86a0>] ext2_make_empty+0x160/0x179
> [<ffffffff802eb734>] ext2_mkdir+0xb5/0x121
> [<ffffffff80278926>] vfs_mkdir+0x6a/0xaa
> [<ffffffff80278a12>] sys_mkdirat+0xac/0xfd
> [<ffffffff80272607>] vfs_stat+0x14/0x16
> [<ffffffff8021b703>] sys32_stat64+0x1a/0x34
> [<ffffffff80278a76>] sys_mkdir+0x13/0x15
> [<ffffffff8021b212>] ia32_sysret+0x0/0xa
hmm, bummer. This use of generic_commit_write() with i_mutex not held is
OK. Other uses of generic_commit_write() with i_mutex not held are not OK.
>
> BUG: warning at fs/inode.c:1389/i_size_write()
>
> bl6-13:
>
> Call Trace:
> [<ffffffff80298a44>] i_size_write+0x45/0x57
> [<ffffffff802a116b>] simple_commit_write+0x3b/0x47
> [<ffffffff8028d96b>] __page_symlink+0xb5/0x150
> [<ffffffff8030b742>] ramfs_symlink+0x4d/0xb7
> [<ffffffff8028e547>] vfs_symlink+0xd4/0x144
> [<ffffffff80290d4e>] sys_symlinkat+0x86/0xd2
> [<ffffffff808e3c33>] do_header+0x70/0x1d2
> [<ffffffff808e2bd5>] do_symlink+0x4b/0x7b
> [<ffffffff808e2a55>] write_buffer+0x1d/0x2b
> [<ffffffff808e2acf>] flush_window+0x6c/0xca
> [<ffffffff808e3097>] inflate_codes+0x38f/0x3ec
> [<ffffffff808e428a>] inflate_dynamic+0x4f5/0x541
> [<ffffffff808e479a>] unpack_to_rootfs+0x4c4/0x923
> [<ffffffff808e4c83>] populate_rootfs+0x8a/0xde
> [<ffffffff8020715a>] init+0x114/0x346
> [<ffffffff8020a925>] child_rip+0xa/0x15
> [<ffffffff803e0d6e>] acpi_ds_init_one_object+0x0/0x82
> [<ffffffff803e0d6e>] acpi_ds_init_one_object+0x0/0x82
> [<ffffffff80207046>] init+0x0/0x346
> [<ffffffff8020a91b>] child_rip+0x0/0x15
>
Ditto.
Is a shame, because this is a nasty bug.
On Tue, 17 Oct 2006 17:45:29 +0200
Cedric Le Goater <[email protected]> wrote:
> > +mm-fix-pagecache-write-deadlocks.patch
>
> filemap_xip.c needs a fix also.
>
> Signed-off-by: Cedric Le Goater <[email protected]>
> ---
> mm/filemap_xip.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
> ===================================================================
> --- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
> +++ 2.6.19-rc2-mm1/mm/filemap_xip.c
> @@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
> break;
> }
>
> - copied = filemap_copy_from_user(page, offset, buf, bytes);
> + copied = filemap_copy_from_user_atomic(page, offset, buf, bytes);
> flush_dcache_page(page);
> if (likely(copied > 0)) {
> status = copied;
<looks>
I think it might actually be that simple. I expected a lot more fuss than
that.
Andrew Morton wrote:
> -generic-implementatation-of-bug.patch
> -generic-implementatation-of-bug-fix.patch
> +generic-bug-implementation.patch
> generic-bug-for-i386.patch
> generic-bug-for-x86-64.patch
> uml-add-generic-bug-support.patch
> use-generic-bug-for-ppc.patch
> bug-test-1.patch
>
> Updated generic-BUG-handling patches
>
I thought the powerpc patch had been given a clean bill of health? Or
was there still a problem with it?
J
--
From: Jeremy Fitzhardinge <[email protected]>
Subject: Generic BUG for powerpc
This makes powerpc use the generic BUG machinery. The biggest
difference from the previous powerpc bug code is that it no longer
reports the function name, since it is redundant with kallsyms, and
not needed in general.
There is an overall reduction of code, since module_32/64 duplicated
several functions.
Unfortunately there's no way to tell gcc that BUG won't return, so the
BUG macro includes a goto loop. This will generate a real jmp
instruction, which is never used.
BTW, powerpc doesn't seem to be using BUG_OPCODE or
BUG_ILLEGAL_INSTRUCTION for actual BUGs any more (I presume they were
once used). There are still a couple of uses of those macros
elsewhere (kernel/prom_init.c and kernel/head_64.S); should be
converted to "twi 31,0,0" as well?
Signed-off-by: Jeremy Fitzhardinge <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Hugh Dickens <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Rusty Russell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---
arch/powerpc/Kconfig | 5 ++
arch/powerpc/kernel/module_32.c | 45 +------------------
arch/powerpc/kernel/module_64.c | 45 +------------------
arch/powerpc/kernel/traps.c | 47 +++-----------------
arch/powerpc/kernel/vmlinux.lds.S | 6 --
arch/powerpc/xmon/xmon.c | 11 ++--
include/asm-powerpc/bug.h | 84 ++++++++++++++++++-------------------
include/asm-powerpc/module.h | 2
8 files changed, 70 insertions(+), 175 deletions(-)
diff -r 19fef64d6aef arch/powerpc/Kconfig
--- a/arch/powerpc/Kconfig Tue Oct 17 12:26:34 2006 -0700
+++ b/arch/powerpc/Kconfig Tue Oct 17 12:34:09 2006 -0700
@@ -106,6 +106,11 @@ config AUDIT_ARCH
config AUDIT_ARCH
bool
default y
+
+config GENERIC_BUG
+ bool
+ default y
+ depends on BUG
config DEFAULT_UIMAGE
bool
diff -r 19fef64d6aef arch/powerpc/kernel/module_32.c
--- a/arch/powerpc/kernel/module_32.c Tue Oct 17 12:26:34 2006 -0700
+++ b/arch/powerpc/kernel/module_32.c Tue Oct 17 12:34:09 2006 -0700
@@ -23,6 +23,7 @@
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/cache.h>
+#include <linux/bug.h>
#if 0
#define DEBUGP printk
@@ -273,48 +274,10 @@ int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs,
struct module *me)
{
- char *secstrings;
- unsigned int i;
-
- me->arch.bug_table = NULL;
- me->arch.num_bugs = 0;
-
- /* Find the __bug_table section, if present */
- secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
- for (i = 1; i < hdr->e_shnum; i++) {
- if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table"))
- continue;
- me->arch.bug_table = (void *) sechdrs[i].sh_addr;
- me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
- break;
- }
-
- /*
- * Strictly speaking this should have a spinlock to protect against
- * traversals, but since we only traverse on BUG()s, a spinlock
- * could potentially lead to deadlock and thus be counter-productive.
- */
- list_add(&me->arch.bug_list, &module_bug_list);
-
- return 0;
+ return module_bug_finalize(hdr, sechdrs, me);
}
void module_arch_cleanup(struct module *mod)
{
- list_del(&mod->arch.bug_list);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
- struct mod_arch_specific *mod;
- unsigned int i;
- struct bug_entry *bug;
-
- list_for_each_entry(mod, &module_bug_list, bug_list) {
- bug = mod->bug_table;
- for (i = 0; i < mod->num_bugs; ++i, ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- }
- return NULL;
-}
+ module_bug_cleanup(mod);
+}
diff -r 19fef64d6aef arch/powerpc/kernel/module_64.c
--- a/arch/powerpc/kernel/module_64.c Tue Oct 17 12:26:34 2006 -0700
+++ b/arch/powerpc/kernel/module_64.c Tue Oct 17 12:34:09 2006 -0700
@@ -20,6 +20,7 @@
#include <linux/moduleloader.h>
#include <linux/err.h>
#include <linux/vmalloc.h>
+#include <linux/bug.h>
#include <asm/module.h>
#include <asm/uaccess.h>
@@ -416,48 +417,10 @@ int module_finalize(const Elf_Ehdr *hdr,
int module_finalize(const Elf_Ehdr *hdr,
const Elf_Shdr *sechdrs, struct module *me)
{
- char *secstrings;
- unsigned int i;
-
- me->arch.bug_table = NULL;
- me->arch.num_bugs = 0;
-
- /* Find the __bug_table section, if present */
- secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
- for (i = 1; i < hdr->e_shnum; i++) {
- if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table"))
- continue;
- me->arch.bug_table = (void *) sechdrs[i].sh_addr;
- me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
- break;
- }
-
- /*
- * Strictly speaking this should have a spinlock to protect against
- * traversals, but since we only traverse on BUG()s, a spinlock
- * could potentially lead to deadlock and thus be counter-productive.
- */
- list_add(&me->arch.bug_list, &module_bug_list);
-
- return 0;
+ return module_bug_finalize(hdr, sechdrs, me);
}
void module_arch_cleanup(struct module *mod)
{
- list_del(&mod->arch.bug_list);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
- struct mod_arch_specific *mod;
- unsigned int i;
- struct bug_entry *bug;
-
- list_for_each_entry(mod, &module_bug_list, bug_list) {
- bug = mod->bug_table;
- for (i = 0; i < mod->num_bugs; ++i, ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- }
- return NULL;
-}
+ module_bug_cleanup(mod);
+}
diff -r 19fef64d6aef arch/powerpc/kernel/traps.c
--- a/arch/powerpc/kernel/traps.c Tue Oct 17 12:26:34 2006 -0700
+++ b/arch/powerpc/kernel/traps.c Tue Oct 17 12:34:09 2006 -0700
@@ -32,6 +32,7 @@
#include <linux/kprobes.h>
#include <linux/kexec.h>
#include <linux/backlight.h>
+#include <linux/bug.h>
#include <asm/kdebug.h>
#include <asm/pgtable.h>
@@ -731,54 +732,9 @@ static int emulate_instruction(struct pt
return -EINVAL;
}
-/*
- * Look through the list of trap instructions that are used for BUG(),
- * BUG_ON() and WARN_ON() and see if we hit one. At this point we know
- * that the exception was caused by a trap instruction of some kind.
- * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
- * otherwise.
- */
-extern struct bug_entry __start___bug_table[], __stop___bug_table[];
-
-#ifndef CONFIG_MODULES
-#define module_find_bug(x) NULL
-#endif
-
-struct bug_entry *find_bug(unsigned long bugaddr)
-{
- struct bug_entry *bug;
-
- for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- return module_find_bug(bugaddr);
-}
-
-static int check_bug_trap(struct pt_regs *regs)
-{
- struct bug_entry *bug;
- unsigned long addr;
-
- if (regs->msr & MSR_PR)
- return 0; /* not in kernel */
- addr = regs->nip; /* address of trap instruction */
- if (addr < PAGE_OFFSET)
- return 0;
- bug = find_bug(regs->nip);
- if (bug == NULL)
- return 0;
- if (bug->line & BUG_WARNING_TRAP) {
- /* this is a WARN_ON rather than BUG/BUG_ON */
- printk(KERN_ERR "Badness in %s at %s:%ld\n",
- bug->function, bug->file,
- bug->line & ~BUG_WARNING_TRAP);
- dump_stack();
- return 1;
- }
- printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
- bug->function, bug->file, bug->line);
-
- return 0;
+int is_valid_bugaddr(unsigned long addr)
+{
+ return is_kernel_addr(addr);
}
void __kprobes program_check_exception(struct pt_regs *regs)
@@ -812,7 +768,9 @@ void __kprobes program_check_exception(s
return;
if (debugger_bpt(regs))
return;
- if (check_bug_trap(regs)) {
+
+ if (!(regs->msr & MSR_PR) && /* not user-mode */
+ report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) {
regs->nip += 4;
return;
}
diff -r 19fef64d6aef arch/powerpc/kernel/vmlinux.lds.S
--- a/arch/powerpc/kernel/vmlinux.lds.S Tue Oct 17 12:26:34 2006 -0700
+++ b/arch/powerpc/kernel/vmlinux.lds.S Tue Oct 17 12:34:09 2006 -0700
@@ -61,11 +61,7 @@ SECTIONS
__stop___ex_table = .;
}
- __bug_table : {
- __start___bug_table = .;
- *(__bug_table)
- __stop___bug_table = .;
- }
+ BUG_TABLE
/*
* Init sections discarded at runtime
diff -r 19fef64d6aef arch/powerpc/xmon/xmon.c
--- a/arch/powerpc/xmon/xmon.c Tue Oct 17 12:26:34 2006 -0700
+++ b/arch/powerpc/xmon/xmon.c Tue Oct 17 12:34:35 2006 -0700
@@ -22,6 +22,7 @@
#include <linux/sysrq.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/bug.h>
#include <asm/ptrace.h>
#include <asm/string.h>
@@ -35,7 +36,6 @@
#include <asm/cputable.h>
#include <asm/rtas.h>
#include <asm/sstep.h>
-#include <asm/bug.h>
#include <asm/irq_regs.h>
#ifdef CONFIG_PPC64
@@ -1332,7 +1332,7 @@ static void backtrace(struct pt_regs *ex
static void print_bug_trap(struct pt_regs *regs)
{
- struct bug_entry *bug;
+ const struct bug_entry *bug;
unsigned long addr;
if (regs->msr & MSR_PR)
@@ -1343,11 +1343,11 @@ static void print_bug_trap(struct pt_reg
bug = find_bug(regs->nip);
if (bug == NULL)
return;
- if (bug->line & BUG_WARNING_TRAP)
+ if (is_warning_bug(bug))
return;
- printf("kernel BUG in %s at %s:%d!\n",
- bug->function, bug->file, (unsigned int)bug->line);
+ printf("kernel BUG at %s:%u!\n",
+ bug->file, bug->line);
}
void excprint(struct pt_regs *fp)
diff -r 19fef64d6aef include/asm-powerpc/bug.h
--- a/include/asm-powerpc/bug.h Tue Oct 17 12:26:34 2006 -0700
+++ b/include/asm-powerpc/bug.h Tue Oct 17 12:34:09 2006 -0700
@@ -13,22 +13,25 @@
#ifndef __ASSEMBLY__
-struct bug_entry {
- unsigned long bug_addr;
- long line;
- const char *file;
- const char *function;
-};
+#ifdef CONFIG_BUG
-struct bug_entry *find_bug(unsigned long bugaddr);
-
-/*
- * If this bit is set in the line number it means that the trap
- * is for WARN_ON rather than BUG or BUG_ON.
- */
-#define BUG_WARNING_TRAP 0x1000000
-
-#ifdef CONFIG_BUG
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+ sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY \
+ ".section __bug_table,\"a\"\n" \
+ "2:\t" PPC_LONG "1b, %0\n" \
+ "\t.short %1, %2\n" \
+ ".org 2b+%3\n" \
+ ".previous\n"
+#else
+#define _EMIT_BUG_ENTRY \
+ ".section __bug_table,\"a\"\n" \
+ "2:\t" PPC_LONG "1b\n" \
+ "\t.short %2\n" \
+ ".org 2b+%3\n" \
+ ".previous\n"
+#endif
/*
* BUG_ON() and WARN_ON() do their best to cooperate with compile-time
@@ -36,14 +39,13 @@ struct bug_entry *find_bug(unsigned long
* some compiler versions may not produce optimal results.
*/
-#define BUG() do { \
- __asm__ __volatile__( \
- "1: twi 31,0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
- ".previous" \
- : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
-} while (0)
+#define BUG() do { \
+ __asm__ __volatile__( \
+ "1: twi 31,0,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), "i" (0)); \
+ for(;;) ; \
+ } while (0)
#define BUG_ON(x) do { \
if (__builtin_constant_p(x)) { \
@@ -51,23 +53,22 @@ struct bug_entry *find_bug(unsigned long
BUG(); \
} else { \
__asm__ __volatile__( \
- "1: "PPC_TLNEI" %0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
- ".previous" \
- : : "r" ((long)(x)), "i" (__LINE__), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ "1: "PPC_TLNEI" %4,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), "i" (0), \
+ "i" (sizeof(struct bug_entry)), \
+ "r" ((long)(x))); \
+ for(;;) ; \
} \
} while (0)
#define __WARN() do { \
__asm__ __volatile__( \
"1: twi 31,0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%0,%1,%2\n" \
- ".previous" \
- : : "i" (__LINE__ + BUG_WARNING_TRAP), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (BUGFLAG_WARNING), \
+ "i" (sizeof(struct bug_entry))); \
} while (0)
#define WARN_ON(x) ({ \
@@ -77,13 +78,12 @@ struct bug_entry *find_bug(unsigned long
__WARN(); \
} else { \
__asm__ __volatile__( \
- "1: "PPC_TLNEI" %0,0\n" \
- ".section __bug_table,\"a\"\n" \
- "\t"PPC_LONG" 1b,%1,%2,%3\n" \
- ".previous" \
- : : "r" (__ret_warn_on), \
- "i" (__LINE__ + BUG_WARNING_TRAP), \
- "i" (__FILE__), "i" (__FUNCTION__)); \
+ "1: "PPC_TLNEI" %4,0\n" \
+ _EMIT_BUG_ENTRY \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (BUGFLAG_WARNING), \
+ "i" (sizeof(struct bug_entry)), \
+ "r" (__ret_warn_on)); \
} \
unlikely(__ret_warn_on); \
})
diff -r 19fef64d6aef include/asm-powerpc/module.h
--- a/include/asm-powerpc/module.h Tue Oct 17 12:26:34 2006 -0700
+++ b/include/asm-powerpc/module.h Tue Oct 17 12:34:09 2006 -0700
@@ -45,8 +45,6 @@ struct mod_arch_specific {
struct bug_entry *bug_table;
unsigned int num_bugs;
};
-
-extern struct bug_entry *module_find_bug(unsigned long bugaddr);
/*
* Select ELF headers.
Hello,
The latest -mm introduced a new error:
CC fs/reiser4/plugin/crypto/digest.o
fs/reiser4/plugin/crypto/digest.c: In function ‘alloc_sha256’:
fs/reiser4/plugin/crypto/digest.c:17: error: too few arguments to function ‘crypto_alloc_hash’
make[2]: *** [fs/reiser4/plugin/crypto/digest.o] Error 1
make[1]: *** [fs/reiser4] Error 2
make: *** [fs] Error 2
Andrew Wade
On Tue, 17 Oct 2006 12:37:48 -0700
Jeremy Fitzhardinge <[email protected]> wrote:
> Andrew Morton wrote:
> > -generic-implementatation-of-bug.patch
> > -generic-implementatation-of-bug-fix.patch
> > +generic-bug-implementation.patch
> > generic-bug-for-i386.patch
> > generic-bug-for-x86-64.patch
> > uml-add-generic-bug-support.patch
> > use-generic-bug-for-ppc.patch
> > bug-test-1.patch
> >
> > Updated generic-BUG-handling patches
> >
> I thought the powerpc patch had been given a clean bill of health? Or
> was there still a problem with it?
No, last time I tested it the machine still froze after "returning from
prom_init". ie: before it had done any WARNs or BUGs. It's rather
mysterious.
Andrew James Wade wrote:
>Hello,
>
>The latest -mm introduced a new error:
>
> CC fs/reiser4/plugin/crypto/digest.o
>fs/reiser4/plugin/crypto/digest.c: In function ‘alloc_sha256’:
>fs/reiser4/plugin/crypto/digest.c:17: error: too few arguments to function ‘crypto_alloc_hash’
>make[2]: *** [fs/reiser4/plugin/crypto/digest.o] Error 1
>make[1]: *** [fs/reiser4] Error 2
>make: *** [fs] Error 2
>
>Andrew Wade
>
>
The fix is attached.
Andrew, please apply.
Thanks.
On Tue, 2006-10-17 at 13:22 -0700, Andrew Morton wrote:
> On Tue, 17 Oct 2006 12:37:48 -0700
> Jeremy Fitzhardinge <[email protected]> wrote:
>
> > Andrew Morton wrote:
> > > -generic-implementatation-of-bug.patch
> > > -generic-implementatation-of-bug-fix.patch
> > > +generic-bug-implementation.patch
> > > generic-bug-for-i386.patch
> > > generic-bug-for-x86-64.patch
> > > uml-add-generic-bug-support.patch
> > > use-generic-bug-for-ppc.patch
> > > bug-test-1.patch
> > >
> > > Updated generic-BUG-handling patches
> > >
> > I thought the powerpc patch had been given a clean bill of health? Or
> > was there still a problem with it?
>
> No, last time I tested it the machine still froze after "returning from
> prom_init". ie: before it had done any WARNs or BUGs. It's rather
> mysterious.
Works for me:
Diego5:~# uname -a
Linux Diego5 2.6.19-rc2-mm1-git #9 SMP Wed Oct 18 19:30:38 EST 2006 ppc64 GNU/Linux
Diego5:~# echo 4 > /proc/sys/vm/drop_caches
Badness in drop_caches_sysctl_handler at /home/michael/src/auto/git/fs/drop_caches.c:67
Call Trace:
[C0000000431F7760] [C00000000000F8E4] .show_stack+0x6c/0x1a0 (unreliable)
[C0000000431F7800] [C000000000447B8C] .program_check_exception+0x19c/0x5cc
[C0000000431F78A0] [C00000000000446C] program_check_common+0xec/0x100
--- Exception: 700 at .drop_caches_sysctl_handler+0x5c/0x88
LR = .drop_caches_sysctl_handler+0x20/0x88
[C0000000431F7C20] [C00000000005725C] .do_rw_proc+0x168/0x230
[C0000000431F7CF0] [C0000000000BC76C] .vfs_write+0xd0/0x1b4
[C0000000431F7D90] [C0000000000BD134] .sys_write+0x4c/0x8c
[C0000000431F7E30] [C00000000000861C] syscall_exit+0x0/0x40
Diego5:~# echo 8 > /proc/sys/vm/drop_caches
kernel BUG in drop_caches_sysctl_handler at /home/michael/src/auto/git/fs/drop_caches.c:69!
cpu 0xd: Vector: 700 (Program Check) at [c0000000431f7910]
pc: c0000000000e3a5c: .drop_caches_sysctl_handler+0x68/0x88
lr: c0000000000e3a14: .drop_caches_sysctl_handler+0x20/0x88
sp: c0000000431f7b90
msr: 8000000000029032
current = 0xc00000000fc8c810
paca = 0xc000000000564e00
pid = 1465, comm = bash
kernel BUG in drop_caches_sysctl_handler at /home/michael/src/auto/git/fs/drop_caches.c:69!
enter ? for help
[c0000000431f7c20] c00000000005725c .do_rw_proc+0x168/0x230
[c0000000431f7cf0] c0000000000bc76c .vfs_write+0xd0/0x1b4
[c0000000431f7d90] c0000000000bd134 .sys_write+0x4c/0x8c
[c0000000431f7e30] c00000000000861c syscall_exit+0x0/0x40
--- Exception: c01 (System Call) at 000000000fec9aac
SP (ff8416f0) is in userspace
d:mon>
There's some NUMA badness going around that you might be hitting.
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>
>
> - Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
> trees, maintained by Jean Delvare.
LTP writev tests seems to lockup the machine. reiserfs issue ?
Didn't you have a patch to dump other CPUs also when this happens ?
Thanks,
Badari
BUG: soft lockup detected on CPU#2!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
[<ffffffff80295198>] __block_prepare_write+0x158/0x470
[<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
[<ffffffff802954ca>] block_prepare_write+0x1a/0x30
[<ffffffff802b7cea>] reiserfs_prepare_write+0xca/0x140
[<ffffffff8024e9d2>] generic_file_buffered_write+0x2b2/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff8024f1e0>] generic_file_aio_write+0x0/0xd0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff8035c18d>] tty_default_put_char+0x1d/0x30
[<ffffffff803618c4>] write_chan+0x374/0x3a0
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff8035e349>] tty_write+0x219/0x250
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209c1e>] system_call+0x7e/0x83
BUG: soft lockup detected on CPU#2!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff8025f3e2>] find_vma+0x12/0x70
[<ffffffff8021e6e5>] do_page_fault+0x3c5/0x870
[<ffffffff802bc2e1>] reiserfs_commit_page+0xe1/0x220
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff8024e89e>] generic_file_buffered_write+0x17e/0x610
[<ffffffff8024eb47>] generic_file_buffered_write+0x427/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff8024f1e0>] generic_file_aio_write+0x0/0xd0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff8035c18d>] tty_default_put_char+0x1d/0x30
[<ffffffff803618c4>] write_chan+0x374/0x3a0
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff8035e349>] tty_write+0x219/0x250
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209c1e>] system_call+0x7e/0x83
BUG: soft lockup detected on CPU#2!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff80256320>] mark_page_accessed+0x30/0x40
[<ffffffff8024eb3f>] generic_file_buffered_write+0x41f/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff8024f1e0>] generic_file_aio_write+0x0/0xd0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff8035c18d>] tty_default_put_char+0x1d/0x30
[<ffffffff803618c4>] write_chan+0x374/0x3a0
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff8035e349>] tty_write+0x219/0x250
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209c1e>] system_call+0x7e/0x83
Badari Pulavarty wrote:
> On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
>
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>>
>>
>>- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
>> trees, maintained by Jean Delvare.
>
>
>
> LTP writev tests seems to lockup the machine. reiserfs issue ?
...
> BUG: soft lockup detected on CPU#2!
>
> Call Trace:
> <IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
> [<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
> [<ffffffff80232067>] update_process_times+0x57/0x90
> [<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
> [<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
> [<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
> [<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
> <EOI> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
> [<ffffffff80295198>] __block_prepare_write+0x158/0x470
> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
> [<ffffffff802954ca>] block_prepare_write+0x1a/0x30
> [<ffffffff802b7cea>] reiserfs_prepare_write+0xca/0x140
> [<ffffffff8024e9d2>] generic_file_buffered_write+0x2b2/0x610
This is likely to be a reiserfs interaction with the pagecache write
deadlock fixes. Chris Mason just now identified a couple of issues
and is going to work on a fix.
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
On Tuesday 17 October 2006 17:19, Edward Shishkin wrote:
> The fix is attached.
> Andrew, please apply.
The kernel compiles and boots; I don't know how to test that code
specifically. Thanks.
Andrew Wade
On Thu, 2006-10-19 at 01:48 +1000, Nick Piggin wrote:
> Badari Pulavarty wrote:
> > On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
> >
> >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
> >>
> >>
> >>- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
> >> trees, maintained by Jean Delvare.
> >
> >
> >
> > LTP writev tests seems to lockup the machine. reiserfs issue ?
>
> ...
>
> > BUG: soft lockup detected on CPU#2!
> >
> > Call Trace:
> > <IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
> > [<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
> > [<ffffffff80232067>] update_process_times+0x57/0x90
> > [<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
> > [<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
> > [<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
> > [<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
> > <EOI> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
> > [<ffffffff80295198>] __block_prepare_write+0x158/0x470
> > [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
> > [<ffffffff802954ca>] block_prepare_write+0x1a/0x30
> > [<ffffffff802b7cea>] reiserfs_prepare_write+0xca/0x140
> > [<ffffffff8024e9d2>] generic_file_buffered_write+0x2b2/0x610
>
> This is likely to be a reiserfs interaction with the pagecache write
> deadlock fixes. Chris Mason just now identified a couple of issues
> and is going to work on a fix.
>
No. seems to be generic issue .. (happens with ext3 also) :(
BUG: soft lockup detected on CPU#3!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802ea27f>] journal_dirty_data+0x2f/0x200
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff802d922d>] ext3_journal_dirty_data+0x1d/0x50
[<ffffffff802d84b8>] walk_page_buffers+0x68/0xb0
[<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802db488>] ext3_ordered_commit_write+0x58/0xd0
[<ffffffff8024eb1c>] generic_file_buffered_write+0x3fc/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff80284a13>] dput+0x23/0x170
[<ffffffff8027c437>] __link_path_walk+0xbd7/0xd40
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff802d7153>] ext3_file_write+0x23/0xc0
[<ffffffff802d7130>] ext3_file_write+0x0/0xc0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209d91>] tracesys+0xd1/0xe0
BUG: soft lockup detected on CPU#3!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802da0a0>] ext3_get_block+0x0/0x120
[<ffffffff8021e637>] do_page_fault+0x317/0x870
[<ffffffff8021e61b>] do_page_fault+0x2fb/0x870
[<ffffffff8021e93f>] do_page_fault+0x61f/0x870
[<ffffffff80231f2c>] __mod_timer+0xac/0xc0
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802da0a0>] ext3_get_block+0x0/0x120
[<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
[<ffffffff8024cc6b>] __filemap_copy_from_user_iovec_inatomic+0x4b/0x70
[<ffffffff8024eade>] generic_file_buffered_write+0x3be/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff80284a13>] dput+0x23/0x170
[<ffffffff8027c437>] __link_path_walk+0xbd7/0xd40
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff802d7153>] ext3_file_write+0x23/0xc0
[<ffffffff802d7130>] ext3_file_write+0x0/0xc0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209d91>] tracesys+0xd1/0xe0
BUG: soft lockup detected on CPU#3!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8024e89e>] generic_file_buffered_write+0x17e/0x610
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff8027fa21>] do_sys_poll+0x351/0x410
[<ffffffff8024e89e>] generic_file_buffered_write+0x17e/0x610
[<ffffffff8021ef82>] search_extable+0x42/0x70
[<ffffffff8023b2fd>] search_exception_tables+0x1d/0x40
[<ffffffff8021e93f>] do_page_fault+0x61f/0x870
[<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff8024e89e>] generic_file_buffered_write+0x17e/0x610
[<ffffffff8024eb47>] generic_file_buffered_write+0x427/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff80284a13>] dput+0x23/0x170
[<ffffffff8027c437>] __link_path_walk+0xbd7/0xd40
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff802d7153>] ext3_file_write+0x23/0xc0
[<ffffffff802d7130>] ext3_file_write+0x0/0xc0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209d91>] tracesys+0xd1/0xe0
On Wed, Oct 18, 2006 at 10:15:47AM -0700, Badari Pulavarty wrote:
> On Thu, 2006-10-19 at 01:48 +1000, Nick Piggin wrote:
> > Badari Pulavarty wrote:
> > > On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
> > > LTP writev tests seems to lockup the machine. reiserfs issue ?
> >
> > ...
> >
> > > BUG: soft lockup detected on CPU#2!
> > >
> >
> > This is likely to be a reiserfs interaction with the pagecache write
> > deadlock fixes. Chris Mason just now identified a couple of issues
> > and is going to work on a fix.
> >
>
> No. seems to be generic issue .. (happens with ext3 also) :(
>
The reiserfs side should be pages marked up to date when they really
aren't. Not a good thing, but not softlockup either.
-chris
Badari Pulavarty wrote:
> On Thu, 2006-10-19 at 01:48 +1000, Nick Piggin wrote:
>
>>Badari Pulavarty wrote:
>>
>>>On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
>>>
>>>
>>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>>>>
>>>>
>>>>- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
>>>> trees, maintained by Jean Delvare.
>>>
>>>
>>>
>>>LTP writev tests seems to lockup the machine. reiserfs issue ?
>>
>>...
>>
>>
>>>BUG: soft lockup detected on CPU#2!
>>>
>>>Call Trace:
>>> <IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
>>> [<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
>>> [<ffffffff80232067>] update_process_times+0x57/0x90
>>> [<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
>>> [<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
>>> [<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
>>> [<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
>>> <EOI> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
>>> [<ffffffff80295198>] __block_prepare_write+0x158/0x470
>>> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
>>> [<ffffffff802954ca>] block_prepare_write+0x1a/0x30
>>> [<ffffffff802b7cea>] reiserfs_prepare_write+0xca/0x140
>>> [<ffffffff8024e9d2>] generic_file_buffered_write+0x2b2/0x610
>>
>>This is likely to be a reiserfs interaction with the pagecache write
>>deadlock fixes. Chris Mason just now identified a couple of issues
>>and is going to work on a fix.
>>
>
>
> No. seems to be generic issue .. (happens with ext3 also) :(
I think I may have missed a fix for ext3 ordered and journalled too
(I've just sent a patch to Andrew privately).
Sorry. Can you try with ext2? Alternatively, try with ext3 or reiserfs
and change the line in mm/filemap.c:generic_file_buffered_write from
status = a_ops->commit_write(file, page, offset, offset+copied);
to
status = a_ops->commit_write(file, page, offset, offset+bytes);
and see if that solves your problem (that will result in rubbish being
temporarily visible, but there is a similar problem upstream anyway, so it
shouldn't cause other failures in your test).
Thanks,
Nick
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
On Thu, 2006-10-19 at 03:32 +1000, Nick Piggin wrote:
> Badari Pulavarty wrote:
> > On Thu, 2006-10-19 at 01:48 +1000, Nick Piggin wrote:
> >
> >>Badari Pulavarty wrote:
> >>
> >>>On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
> >>>
> >>>
> >>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
> >>>>
> >>>>
> >>>>- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
> >>>> trees, maintained by Jean Delvare.
> >>>
> >>>
> >>>
> >>>LTP writev tests seems to lockup the machine. reiserfs issue ?
> >>
> >>...
> >>
> >>
> >>>BUG: soft lockup detected on CPU#2!
> >>>
> >>>Call Trace:
> >>> <IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
> >>> [<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
> >>> [<ffffffff80232067>] update_process_times+0x57/0x90
> >>> [<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
> >>> [<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
> >>> [<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
> >>> [<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
> >>> <EOI> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
> >>> [<ffffffff80295198>] __block_prepare_write+0x158/0x470
> >>> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
> >>> [<ffffffff802954ca>] block_prepare_write+0x1a/0x30
> >>> [<ffffffff802b7cea>] reiserfs_prepare_write+0xca/0x140
> >>> [<ffffffff8024e9d2>] generic_file_buffered_write+0x2b2/0x610
> >>
> >>This is likely to be a reiserfs interaction with the pagecache write
> >>deadlock fixes. Chris Mason just now identified a couple of issues
> >>and is going to work on a fix.
> >>
> >
> >
> > No. seems to be generic issue .. (happens with ext3 also) :(
>
> I think I may have missed a fix for ext3 ordered and journalled too
> (I've just sent a patch to Andrew privately).
>
> Sorry. Can you try with ext2?
No luck with ext2 either ..
BUG: soft lockup detected on CPU#2!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff8021e637>] do_page_fault+0x317/0x870
[<ffffffff8021e61b>] do_page_fault+0x2fb/0x870
[<ffffffff802f3e70>] ext2_get_block+0x0/0x680
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff8024e89e>] generic_file_buffered_write+0x17e/0x610
[<ffffffff8024eb47>] generic_file_buffered_write+0x427/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff8024f1e0>] generic_file_aio_write+0x0/0xd0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff8035c18d>] tty_default_put_char+0x1d/0x30
[<ffffffff803618c4>] write_chan+0x374/0x3a0
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209c1e>] system_call+0x7e/0x83
BUG: soft lockup detected on CPU#2!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff802f3e70>] ext2_get_block+0x0/0x680
[<ffffffff8021e637>] do_page_fault+0x317/0x870
[<ffffffff8021e61b>] do_page_fault+0x2fb/0x870
[<ffffffff8021e93f>] do_page_fault+0x61f/0x870
[<ffffffff802f3e70>] ext2_get_block+0x0/0x680
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff802f3e70>] ext2_get_block+0x0/0x680
[<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
[<ffffffff8024cc6b>] __filemap_copy_from_user_iovec_inatomic+0x4b/0x70
[<ffffffff8024eade>] generic_file_buffered_write+0x3be/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff8024f1e0>] generic_file_aio_write+0x0/0xd0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff8035c18d>] tty_default_put_char+0x1d/0x30
[<ffffffff803618c4>] write_chan+0x374/0x3a0
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209c1e>] system_call+0x7e/0x83
Badari Pulavarty wrote:
> On Thu, 2006-10-19 at 03:32 +1000, Nick Piggin wrote:
>
>>Badari Pulavarty wrote:
>>
>>>On Thu, 2006-10-19 at 01:48 +1000, Nick Piggin wrote:
>>>
>>>
>>>>Badari Pulavarty wrote:
>>>>
>>>>
>>>>>On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
>>>>>
>>>>>
>>>>>
>>>>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>>>>>>
>>>>>>
>>>>>>- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
>>>>>>trees, maintained by Jean Delvare.
>>>>>
>>>>>
>>>>>
>>>>>LTP writev tests seems to lockup the machine. reiserfs issue ?
>>>>
>>>>...
>>>>
>>>>
>>>>
>>>>>BUG: soft lockup detected on CPU#2!
>>>>>
>>>>>Call Trace:
>>>>><IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
>>>>>[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
>>>>>[<ffffffff80232067>] update_process_times+0x57/0x90
>>>>>[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
>>>>>[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
>>>>>[<ffffffff80326ce0>] __copy_user_nocache+0x20/0x150
>>>>>[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
>>>>><EOI> [<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
>>>>>[<ffffffff80295198>] __block_prepare_write+0x158/0x470
>>>>>[<ffffffff802b8de0>] reiserfs_get_block+0x0/0x10c0
>>>>>[<ffffffff802954ca>] block_prepare_write+0x1a/0x30
>>>>>[<ffffffff802b7cea>] reiserfs_prepare_write+0xca/0x140
>>>>>[<ffffffff8024e9d2>] generic_file_buffered_write+0x2b2/0x610
>>>>
>>>>This is likely to be a reiserfs interaction with the pagecache write
>>>>deadlock fixes. Chris Mason just now identified a couple of issues
>>>>and is going to work on a fix.
>>>>
>>>
>>>
>>>No. seems to be generic issue .. (happens with ext3 also) :(
>>
>>I think I may have missed a fix for ext3 ordered and journalled too
>>(I've just sent a patch to Andrew privately).
>>
>>Sorry. Can you try with ext2?
>
>
>
> No luck with ext2 either ..
Hmm OK, it could be an issue with the way the iovecs are being walked. Maybe.
I wouldn't have thought that should fire the softlockup detector though.
It could walk a large number of iovec segments (4096) with preempt disabled,
but that's not 10s worth.
And it looks like it is getting stuck in commit_write (but the traces are
a bit wonky, could be some faults happening too).
Do you have CONFIG_DEBUG_VM turned on? (hmm, I notice fault_in_pages_readable
in that case should be have a 2nd argument of seglen rather than bytes, but
that shouldn't be causing your problem)
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
On Thu, 2006-10-19 at 03:32 +1000, Nick Piggin wrote:
> Badari Pulavarty wrote:
> > On Thu, 2006-10-19 at 01:48 +1000, Nick Piggin wrote:
> >
> >>Badari Pulavarty wrote:
> >>
> >>>On Mon, 2006-10-16 at 23:06 -0700, Andrew Morton wrote:
> >>>
> >>>
> >>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
> >>>>
> >>>>
> >>>>- Added the hwmon and i2c trees to the -mm lineup. These are quilt-style
> >>>> trees, maintained by Jean Delvare.
> >>>
> >>>
> >>>
> >>>LTP writev tests seems to lockup the machine. reiserfs issue ?
> >>
...
> >
> > No. seems to be generic issue .. (happens with ext3 also) :(
>
> I think I may have missed a fix for ext3 ordered and journalled too
> (I've just sent a patch to Andrew privately).
>
> Sorry. Can you try with ext2? Alternatively, try with ext3 or reiserfs
> and change the line in mm/filemap.c:generic_file_buffered_write from
>
> status = a_ops->commit_write(file, page, offset, offset+copied);
> to
> status = a_ops->commit_write(file, page, offset, offset+bytes);
>
> and see if that solves your problem (that will result in rubbish being
> temporarily visible, but there is a similar problem upstream anyway, so it
> shouldn't cause other failures in your test).
No. Above change didn't help either :(
Thanks,
Badari
BUG: soft lockup detected on CPU#1!
Call Trace:
<IRQ> [<ffffffff8024a4ba>] softlockup_tick+0xfa/0x120
[<ffffffff8022e10f>] __do_softirq+0x5f/0xd0
[<ffffffff80232067>] update_process_times+0x57/0x90
[<ffffffff80217e84>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff802185db>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802ea27f>] journal_dirty_data+0x2f/0x200
[<ffffffff8048012d>] error_exit+0x0/0x84
[<ffffffff802d922d>] ext3_journal_dirty_data+0x1d/0x50
[<ffffffff802d84b8>] walk_page_buffers+0x68/0xb0
[<ffffffff802d9210>] ext3_journal_dirty_data+0x0/0x50
[<ffffffff802db488>] ext3_ordered_commit_write+0x58/0xd0
[<ffffffff8024eb29>] generic_file_buffered_write+0x409/0x610
[<ffffffff8022d84b>] current_fs_time+0x3b/0x40
[<ffffffff8022023c>] task_rq_lock+0x4c/0x90
[<ffffffff8024f157>] __generic_file_aio_write_nolock+0x427/0x4b0
[<ffffffff8022192c>] try_to_wake_up+0x39c/0x3c0
[<ffffffff8021fad4>] __wake_up_common+0x44/0x80
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff8024f247>] generic_file_aio_write+0x67/0xd0
[<ffffffff802d7153>] ext3_file_write+0x23/0xc0
[<ffffffff802d7130>] ext3_file_write+0x0/0xc0
[<ffffffff80271f53>] do_sync_readv_writev+0xc3/0x110
[<ffffffff8023d910>] autoremove_wake_function+0x0/0x30
[<ffffffff8035c18d>] tty_default_put_char+0x1d/0x30
[<ffffffff803618c4>] write_chan+0x374/0x3a0
[<ffffffff80271daa>] rw_copy_check_uvector+0x8a/0x130
[<ffffffff802726ef>] do_readv_writev+0xef/0x200
[<ffffffff8047ee5f>] __mutex_lock_slowpath+0x1df/0x1f0
[<ffffffff80272d43>] sys_writev+0x53/0xc0
[<ffffffff80209c1e>] system_call+0x7e/0x83
Badari Pulavarty wrote:
> On Thu, 2006-10-19 at 03:32 +1000, Nick Piggin wrote:
>>Sorry. Can you try with ext2? Alternatively, try with ext3 or reiserfs
>>and change the line in mm/filemap.c:generic_file_buffered_write from
>>
>> status = a_ops->commit_write(file, page, offset, offset+copied);
>>to
>> status = a_ops->commit_write(file, page, offset, offset+bytes);
>>
>>and see if that solves your problem (that will result in rubbish being
>>temporarily visible, but there is a similar problem upstream anyway, so it
>>shouldn't cause other failures in your test).
>
>
> No. Above change didn't help either :(
OK, so it isn't due to passing in a short / zero length to commit_write.
It is more likely to be a subtle bug when retrying the write after having
faulted on the first page. Hmm, you wouldn't be deadlocking on i_mutex,
due to faulting in fault_in_pages_readable (that is against the documented
lock ordering, but thank god it looks like the documentation is incorrect
as msync doesn't hold mmap_sem over do_fsync).
I can't see anything yet, but I'll keep looking (and try to reproduce
if I can get TLP working).
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
On Thu, 2006-10-19 at 04:14 +1000, Nick Piggin wrote:
> Badari Pulavarty wrote:
> > On Thu, 2006-10-19 at 03:32 +1000, Nick Piggin wrote:
>
> >>Sorry. Can you try with ext2? Alternatively, try with ext3 or reiserfs
> >>and change the line in mm/filemap.c:generic_file_buffered_write from
> >>
> >> status = a_ops->commit_write(file, page, offset, offset+copied);
> >>to
> >> status = a_ops->commit_write(file, page, offset, offset+bytes);
> >>
> >>and see if that solves your problem (that will result in rubbish being
> >>temporarily visible, but there is a similar problem upstream anyway, so it
> >>shouldn't cause other failures in your test).
> >
> >
> > No. Above change didn't help either :(
>
> OK, so it isn't due to passing in a short / zero length to commit_write.
>
> It is more likely to be a subtle bug when retrying the write after having
> faulted on the first page. Hmm, you wouldn't be deadlocking on i_mutex,
> due to faulting in fault_in_pages_readable (that is against the documented
> lock ordering, but thank god it looks like the documentation is incorrect
> as msync doesn't hold mmap_sem over do_fsync).
>
> I can't see anything yet, but I'll keep looking (and try to reproduce
> if I can get TLP working).
>
I realized that, I am not using STACK_UNWIND - so traces may be fishing
on the stack. I enabled unwinder, traces got worse :( unwinder problems
again ?
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#1!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc2-mm1
# Wed Oct 18 16:11:35 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_UTS_NS=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_KEVENT=y
CONFIG_KEVENT_USER_STAT=y
CONFIG_KEVENT_TIMER=y
CONFIG_KEVENT_POLL=y
CONFIG_KEVENT_SOCKET=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_HIGH_RES_TIMERS=y
CONFIG_NO_HZ=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_READAHEAD_ALLOW_OVERHEADS is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SECCOMP_DISABLE_TSC is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_MULTITHREAD_PROBE=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_ROUTE_FWMARK=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_NETLABEL is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_HUB6=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
# CONFIG_VIDEO_PVRUSB2_29XXX is not set
# CONFIG_VIDEO_PVRUSB2_24XXX is not set
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_EM28XX is not set
CONFIG_VIDEO_USBVIDEO=m
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_QUICKCAM_MESSENGER=m
# CONFIG_USB_ET61X251 is not set
CONFIG_VIDEO_OVCAMCHIP=m
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
CONFIG_USB_MULTITHREAD_PROBE=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_QUATECH_ESU100=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m
CONFIG_USB_GOTEMP=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82860=y
# CONFIG_EDAC_K8 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_FSCACHE is not set
CONFIG_RXRPC=m
# CONFIG_9P_FS is not set
CONFIG_GENERIC_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_FS=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_INTEGRITY=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SLIM is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
Nick Piggin wrote:
> I can't see anything yet, but I'll keep looking (and try to reproduce
> if I can get TLP working).
Ah, it is probably exercising the -EFAULT path, and the code in
Andrew's tree goes into an infinite loop I think.
We can't test for a fault off the atomic copy, because that needn't
indicate an unmapped area. What we need to do is change
fault_in_pages_readable to return ret, and catch and return that
in the caller if it is an error.
My usual workstation is down ATM otherwise I would send you a patch.
Unless someone beats me to it, I'll send you one tomorrow.
Thanks,
Nick
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc2-mm1
# Wed Oct 18 18:06:13 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_UTS_NS=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_KEVENT=y
CONFIG_KEVENT_USER_STAT=y
CONFIG_KEVENT_TIMER=y
CONFIG_KEVENT_POLL=y
CONFIG_KEVENT_SOCKET=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_HIGH_RES_TIMERS=y
CONFIG_NO_HZ=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_READAHEAD_ALLOW_OVERHEADS is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SECCOMP_DISABLE_TSC is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_SONY is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_MULTITHREAD_PROBE=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_ROUTE_FWMARK=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_NETLABEL is not set
CONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_HUB6=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
# CONFIG_VIDEO_PVRUSB2_29XXX is not set
# CONFIG_VIDEO_PVRUSB2_24XXX is not set
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_EM28XX is not set
CONFIG_VIDEO_USBVIDEO=m
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_QUICKCAM_MESSENGER=m
# CONFIG_USB_ET61X251 is not set
CONFIG_VIDEO_OVCAMCHIP=m
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
CONFIG_USB_MULTITHREAD_PROBE=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_QUATECH_ESU100=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m
CONFIG_USB_GOTEMP=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82875P=y
CONFIG_EDAC_I82860=y
# CONFIG_EDAC_K8 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=y
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_FSCACHE is not set
CONFIG_RXRPC=m
# CONFIG_9P_FS is not set
CONFIG_GENERIC_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_FS=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_INTEGRITY=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SLIM is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
On Wed, 18 Oct 2006 20:05:48 +1000
Michael Ellerman <[email protected]> wrote:
> On Tue, 2006-10-17 at 13:22 -0700, Andrew Morton wrote:
> > On Tue, 17 Oct 2006 12:37:48 -0700
> > Jeremy Fitzhardinge <[email protected]> wrote:
> >
> > > Andrew Morton wrote:
> > > > -generic-implementatation-of-bug.patch
> > > > -generic-implementatation-of-bug-fix.patch
> > > > +generic-bug-implementation.patch
> > > > generic-bug-for-i386.patch
> > > > generic-bug-for-x86-64.patch
> > > > uml-add-generic-bug-support.patch
> > > > use-generic-bug-for-ppc.patch
> > > > bug-test-1.patch
> > > >
> > > > Updated generic-BUG-handling patches
> > > >
> > > I thought the powerpc patch had been given a clean bill of health? Or
> > > was there still a problem with it?
> >
> > No, last time I tested it the machine still froze after "returning from
> > prom_init". ie: before it had done any WARNs or BUGs. It's rather
> > mysterious.
>
> Works for me:
>
> Diego5:~# uname -a
> Linux Diego5 2.6.19-rc2-mm1-git #9 SMP Wed Oct 18 19:30:38 EST 2006 ppc64 GNU/Linux
Yeah, weird. I'll test it a third time.
> Diego5:~# echo 4 > /proc/sys/vm/drop_caches
> Badness in drop_caches_sysctl_handler at /home/michael/src/auto/git/fs/drop_caches.c:67
> Call Trace:
> [C0000000431F7760] [C00000000000F8E4] .show_stack+0x6c/0x1a0 (unreliable)
> [C0000000431F7800] [C000000000447B8C] .program_check_exception+0x19c/0x5cc
> [C0000000431F78A0] [C00000000000446C] program_check_common+0xec/0x100
> --- Exception: 700 at .drop_caches_sysctl_handler+0x5c/0x88
> LR = .drop_caches_sysctl_handler+0x20/0x88
> [C0000000431F7C20] [C00000000005725C] .do_rw_proc+0x168/0x230
> [C0000000431F7CF0] [C0000000000BC76C] .vfs_write+0xd0/0x1b4
> [C0000000431F7D90] [C0000000000BD134] .sys_write+0x4c/0x8c
> [C0000000431F7E30] [C00000000000861C] syscall_exit+0x0/0x40
> Diego5:~# echo 8 > /proc/sys/vm/drop_caches
> kernel BUG in drop_caches_sysctl_handler at /home/michael/src/auto/git/fs/drop_caches.c:69!
> cpu 0xd: Vector: 700 (Program Check) at [c0000000431f7910]
> pc: c0000000000e3a5c: .drop_caches_sysctl_handler+0x68/0x88
> lr: c0000000000e3a14: .drop_caches_sysctl_handler+0x20/0x88
> sp: c0000000431f7b90
> msr: 8000000000029032
> current = 0xc00000000fc8c810
> paca = 0xc000000000564e00
> pid = 1465, comm = bash
> kernel BUG in drop_caches_sysctl_handler at /home/michael/src/auto/git/fs/drop_caches.c:69!
> enter ? for help
> [c0000000431f7c20] c00000000005725c .do_rw_proc+0x168/0x230
> [c0000000431f7cf0] c0000000000bc76c .vfs_write+0xd0/0x1b4
> [c0000000431f7d90] c0000000000bd134 .sys_write+0x4c/0x8c
> [c0000000431f7e30] c00000000000861c syscall_exit+0x0/0x40
> --- Exception: c01 (System Call) at 000000000fec9aac
> SP (ff8416f0) is in userspace
> d:mon>
>
> There's some NUMA badness going around that you might be hitting.
I don't set CONFIG_NUMA on the g5.
On Wednesday, 18 October 2006 20:27, Gabriel C wrote:
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
> >
>
> Hello,
>
> I got this build error with 2.6.19-rc2-mm1:
>
> CHK include/linux/compile.h
> UPD include/linux/compile.h
> CC init/version.o
> LD init/built-in.o
> LD .tmp_vmlinux1
> mm/built-in.o: In function `xip_file_write':
> (.text+0x19a47): undefined reference to `filemap_copy_from_user'
> make: *** [.tmp_vmlinux1] Error 1
\metoo
Rafael J. Wysocki wrote:
> On Wednesday, 18 October 2006 20:27, Gabriel C wrote:
>> Andrew Morton wrote:
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>>>
>> Hello,
>>
>> I got this build error with 2.6.19-rc2-mm1:
>>
>> CHK include/linux/compile.h
>> UPD include/linux/compile.h
>> CC init/version.o
>> LD init/built-in.o
>> LD .tmp_vmlinux1
>> mm/built-in.o: In function `xip_file_write':
>> (.text+0x19a47): undefined reference to `filemap_copy_from_user'
>> make: *** [.tmp_vmlinux1] Error 1
>
> \metoo
Here's a fix i sent to andrew.
C.
Signed-off-by: Cedric Le Goater <[email protected]>
---
mm/filemap_xip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
===================================================================
--- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
+++ 2.6.19-rc2-mm1/mm/filemap_xip.c
@@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
break;
}
- copied = filemap_copy_from_user(page, offset, buf, bytes);
+ copied = filemap_copy_from_user_atomic(page, offset, buf, bytes);
flush_dcache_page(page);
if (likely(copied > 0)) {
status = copied;
Cedric Le Goater wrote:
> Rafael J. Wysocki wrote:
>
>>On Wednesday, 18 October 2006 20:27, Gabriel C wrote:
>>
>>>Andrew Morton wrote:
>>>
>>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>>>>
>>>
>>>Hello,
>>>
>>>I got this build error with 2.6.19-rc2-mm1:
>>>
>>>CHK include/linux/compile.h
>>>UPD include/linux/compile.h
>>>CC init/version.o
>>>LD init/built-in.o
>>>LD .tmp_vmlinux1
>>>mm/built-in.o: In function `xip_file_write':
>>>(.text+0x19a47): undefined reference to `filemap_copy_from_user'
>>>make: *** [.tmp_vmlinux1] Error 1
>>
>>\metoo
>
>
> Here's a fix i sent to andrew.
>
> C.
>
>
> Signed-off-by: Cedric Le Goater <[email protected]>
> ---
> mm/filemap_xip.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
> ===================================================================
> --- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
> +++ 2.6.19-rc2-mm1/mm/filemap_xip.c
> @@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
> break;
> }
>
> - copied = filemap_copy_from_user(page, offset, buf, bytes);
> + copied = filemap_copy_from_user_atomic(page, offset, buf, bytes);
> flush_dcache_page(page);
> if (likely(copied > 0)) {
> status = copied;
This fix will work. You should really call the non atomic version though, just
so it is clear (and maybe some architectures care).
Because we must service a fault if it happens here. The fault_in_pages_readable
and comments are wrong AFAIKS.
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
On Wednesday, 18 October 2006 21:42, Nick Piggin wrote:
> Cedric Le Goater wrote:
> > Rafael J. Wysocki wrote:
> >
> >>On Wednesday, 18 October 2006 20:27, Gabriel C wrote:
> >>
> >>>Andrew Morton wrote:
> >>>
> >>>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
> >>>>
> >>>
> >>>Hello,
> >>>
> >>>I got this build error with 2.6.19-rc2-mm1:
> >>>
> >>>CHK include/linux/compile.h
> >>>UPD include/linux/compile.h
> >>>CC init/version.o
> >>>LD init/built-in.o
> >>>LD .tmp_vmlinux1
> >>>mm/built-in.o: In function `xip_file_write':
> >>>(.text+0x19a47): undefined reference to `filemap_copy_from_user'
> >>>make: *** [.tmp_vmlinux1] Error 1
> >>
> >>\metoo
> >
> >
> > Here's a fix i sent to andrew.
> >
> > C.
> >
> >
> > Signed-off-by: Cedric Le Goater <[email protected]>
> > ---
> > mm/filemap_xip.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
> > ===================================================================
> > --- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
> > +++ 2.6.19-rc2-mm1/mm/filemap_xip.c
> > @@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
> > break;
> > }
> >
> > - copied = filemap_copy_from_user(page, offset, buf, bytes);
> > + copied = filemap_copy_from_user_atomic(page, offset, buf, bytes);
> > flush_dcache_page(page);
> > if (likely(copied > 0)) {
> > status = copied;
>
> This fix will work. You should really call the non atomic version though, just
> so it is clear (and maybe some architectures care).
>
> Because we must service a fault if it happens here. The fault_in_pages_readable
> and comments are wrong AFAIKS.
So I guess there should be
copied = filemap_copy_from_user_nonatomic(page, offset, buf, bytes);
Cedric Le Goater wrote:
> Rafael J. Wysocki wrote:
>
>> On Wednesday, 18 October 2006 20:27, Gabriel C wrote:
>>
>>> Andrew Morton wrote:
>>>
>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19-rc2/2.6.19-rc2-mm1/
>>>>
>>>>
>>> Hello,
>>>
>>> I got this build error with 2.6.19-rc2-mm1:
>>>
>>> CHK include/linux/compile.h
>>> UPD include/linux/compile.h
>>> CC init/version.o
>>> LD init/built-in.o
>>> LD .tmp_vmlinux1
>>> mm/built-in.o: In function `xip_file_write':
>>> (.text+0x19a47): undefined reference to `filemap_copy_from_user'
>>> make: *** [.tmp_vmlinux1] Error 1
>>>
>> \metoo
>>
>
> Here's a fix i sent to andrew.
>
> C.
>
>
> Signed-off-by: Cedric Le Goater <[email protected]>
> ---
> mm/filemap_xip.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
> ===================================================================
> --- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
> +++ 2.6.19-rc2-mm1/mm/filemap_xip.c
> @@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
> break;
> }
>
> - copied = filemap_copy_from_user(page, offset, buf, bytes);
> + copied = filemap_copy_from_user_atomic(page, offset, buf, bytes);
> flush_dcache_page(page);
> if (likely(copied > 0)) {
> status = copied;
>
>
This patch fixed the problem here. Thx.
Gabriel
> This fix will work. You should really call the non atomic version
> though, just so it is clear (and maybe some architectures care).
ok. I've updated the patch.
> Because we must service a fault if it happens here. The
> fault_in_pages_readable and comments are wrong AFAIKS.
hmm. It says :
/*
* Bring in the user page that we will copy from _first_.
* Otherwise there's a nasty deadlock on copying from the
* same page as we're writing to, without it being marked
* up-to-date.
*/
How can we improve it ?
thanks,
C.
Signed-off-by: Cedric Le Goater <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Nick Piggin <[email protected]>
---
mm/filemap_xip.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: 2.6.19-rc2-mm1/mm/filemap_xip.c
===================================================================
--- 2.6.19-rc2-mm1.orig/mm/filemap_xip.c
+++ 2.6.19-rc2-mm1/mm/filemap_xip.c
@@ -317,7 +317,7 @@ __xip_file_write(struct file *filp, cons
break;
}
- copied = filemap_copy_from_user(page, offset, buf, bytes);
+ copied = filemap_copy_from_user_nonatomic(page, offset, buf, bytes);
flush_dcache_page(page);
if (likely(copied > 0)) {
status = copied;
On Wed, 18 Oct 2006, Gabriel C wrote:
> Me again :) Just found this in my syslog:
> [ 20.540964] VFS: Mounted root (ext3 filesystem) readonly.
> [ 20.541245] Freeing unused kernel memory: 196k freed
> [ 22.114421] EXT3 FS on hda1, internal journal
> [ 22.320373] BUG: warning at fs/inode.c:1389/i_size_write()
> [ 22.320380] [<c0174f14>] i_size_write+0x36/0x57
> [ 22.320391] [<c017c287>] simple_commit_write+0x5b/0x6a
> [ 22.320395] [<c016b0d8>] __page_symlink+0xb4/0x152
> [ 22.320400] [<c016b18c>] page_symlink+0x16/0x19
> [ 22.320404] [<c01cd7f3>] ramfs_symlink+0x41/0xae
> [ 22.320410] [<c016b81d>] permission+0xc7/0xda
> [ 22.320413] [<c016ba6d>] vfs_symlink+0xb4/0x115
> [ 22.320416] [<c016dcc1>] sys_symlinkat+0x74/0xab
> [ 22.320420] [<c016dd07>] sys_symlink+0xf/0x13
> [ 22.320423] [<c0102c62>] sysenter_past_esp+0x5f/0x85
> [ 22.320428] [<c0300033>] xfrm_lookup+0x2a2/0x4b9
> [ 22.320434] =======================
I guess this fixes the warning. Should it be applied? I am not quite sure
...
[PATCH] VFS: fix i_mutex locking in page_symlink()
The inode->i_mutex should be held every time when calling i_size_write(),
and the function contains WARN_ON() for that condition.
page_symlink(), however, does not lock i_mutex. It is perfectly OK, as the
i_mutex for the directory is held at the time page_symlink() is running,
so noone is able to change i_size during race condition. However,
i_size_write() spits out the warning without this patch.
Signed-off-by: Jiri Kosina <[email protected]>
---
fs/namei.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/fs/namei.c b/fs/namei.c
index 61f99c1..1025973 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2701,17 +2701,22 @@ retry:
page = find_or_create_page(mapping, 0, gfp_mask);
if (!page)
goto fail;
+ mutex_lock(&inode->i_mutex);
err = mapping->a_ops->prepare_write(NULL, page, 0, len-1);
if (err == AOP_TRUNCATED_PAGE) {
page_cache_release(page);
+ mutex_unlock(&inode->i_mutex);
goto retry;
}
- if (err)
+ if (err) {
+ mutex_unlock(&inode->i_mutex);
goto fail_map;
+ }
kaddr = kmap_atomic(page, KM_USER0);
memcpy(kaddr, symname, len-1);
kunmap_atomic(kaddr, KM_USER0);
err = mapping->a_ops->commit_write(NULL, page, 0, len-1);
+ mutex_unlock(&inode->i_mutex);
if (err == AOP_TRUNCATED_PAGE) {
page_cache_release(page);
goto retry;
--
Jiri Kosina
On Wed, 18 Oct 2006 22:26:50 +0200
Cedric Le Goater <[email protected]> wrote:
> > Because we must service a fault if it happens here. The
> > fault_in_pages_readable and comments are wrong AFAIKS.
>
> hmm. It says :
>
> /*
> * Bring in the user page that we will copy from _first_.
> * Otherwise there's a nasty deadlock on copying from the
> * same page as we're writing to, without it being marked
> * up-to-date.
> */
>
> How can we improve it ?
The page we're writing into isn't locked, so there's no deadlock afaict.
But then, I forget how xip works. Carsten, is it actually being used for
anything?
On Wed, 18 Oct 2006 23:44:03 +0200 (CEST)
Jiri Kosina <[email protected]> wrote:
> [PATCH] VFS: fix i_mutex locking in page_symlink()
>
> The inode->i_mutex should be held every time when calling i_size_write(),
> and the function contains WARN_ON() for that condition.
> page_symlink(), however, does not lock i_mutex. It is perfectly OK, as the
> i_mutex for the directory is held at the time page_symlink() is running,
> so noone is able to change i_size during race condition. However,
> i_size_write() spits out the warning without this patch.
>
I suspect it isn't necessary because the symlink's inode hasn't been wired
up into the directory tree yet and no other thread can find it and do
things to it.
On Wed, 18 Oct 2006, Andrew Morton wrote:
> > The inode->i_mutex should be held every time when calling
> > i_size_write(), and the function contains WARN_ON() for that
> > condition. page_symlink(), however, does not lock i_mutex. It is
> > perfectly OK, as the i_mutex for the directory is held at the time
> > page_symlink() is running, so noone is able to change i_size during
> > race condition. However, i_size_write() spits out the warning without
> > this patch.
> I suspect it isn't necessary because the symlink's inode hasn't been wired
> up into the directory tree yet and no other thread can find it and do
> things to it.
I completely agree (see my comments to the patch in previous mail).
However, the warning emitted by i_size_write() should really go away. I
can see the following possibilities:
- lock the i_mutex, even though it's for sure not necessary. Not nice.
- remove the warning from i_size_write(). Not nice either, we want to be
warned about other calls that are not correct
- make the warning in i_size_write() conditional on inode->i_dentry not
being NULL (?)
Thanks,
--
Jiri Kosina
On Wed, 18 Oct 2006 10:58:23 -0700
Badari Pulavarty <[email protected]> wrote:
> > > No. seems to be generic issue .. (happens with ext3 also) :(
> >
> > I think I may have missed a fix for ext3 ordered and journalled too
> > (I've just sent a patch to Andrew privately).
> >
> > Sorry. Can you try with ext2? Alternatively, try with ext3 or reiserfs
> > and change the line in mm/filemap.c:generic_file_buffered_write from
> >
> > status = a_ops->commit_write(file, page, offset, offset+copied);
> > to
> > status = a_ops->commit_write(file, page, offset, offset+bytes);
> >
> > and see if that solves your problem (that will result in rubbish being
> > temporarily visible, but there is a similar problem upstream anyway, so it
> > shouldn't cause other failures in your test).
>
> No. Above change didn't help either :(
>
> Thanks,
> Badari
>
> BUG: soft lockup detected on CPU#1!
We should have got an all-CPU backtrace via the fancy new trigger_all_cpu_backtrace()
thing.
Is the NMI watchdog ticking over?
On Thu, 19 Oct 2006 00:41:40 +0200 (CEST)
Jiri Kosina <[email protected]> wrote:
> On Wed, 18 Oct 2006, Andrew Morton wrote:
>
> > > The inode->i_mutex should be held every time when calling
> > > i_size_write(), and the function contains WARN_ON() for that
> > > condition. page_symlink(), however, does not lock i_mutex. It is
> > > perfectly OK, as the i_mutex for the directory is held at the time
> > > page_symlink() is running, so noone is able to change i_size during
> > > race condition. However, i_size_write() spits out the warning without
> > > this patch.
> > I suspect it isn't necessary because the symlink's inode hasn't been wired
> > up into the directory tree yet and no other thread can find it and do
> > things to it.
>
> I completely agree (see my comments to the patch in previous mail).
> However, the warning emitted by i_size_write() should really go away. I
> can see the following possibilities:
>
> - lock the i_mutex, even though it's for sure not necessary. Not nice.
> - remove the warning from i_size_write(). Not nice either, we want to be
> warned about other calls that are not correct
> - make the warning in i_size_write() conditional on inode->i_dentry not
> being NULL (?)
>
I simply dropped the debugging patch. Which is pretty sad, because it _is_ a
really nasty and subtle-to-show bug. So I'd be OK with adding sufficient
patches to -mm to make the false positives go away so we can re-add the
check.
Andy Whitcroft <apw <at> shadowen.org> writes:
>
> Seeing this on a couple of x86_64's so far, probabally widespread:
>
> BUG: warning at fs/inode.c:1389/i_size_write()
>
> elm3b6:
>
> Call Trace:
> [<ffffffff8028207d>] i_size_write+0x51/0x73
> [<ffffffff8028ddfb>] generic_commit_write+0x35/0x49
> [<ffffffff802e78d1>] ext2_commit_chunk+0x32/0x6d
> [<ffffffff802e86a0>] ext2_make_empty+0x160/0x179
> [<ffffffff802eb734>] ext2_mkdir+0xb5/0x121
> [<ffffffff80278926>] vfs_mkdir+0x6a/0xaa
> [<ffffffff80278a12>] sys_mkdirat+0xac/0xfd
> [<ffffffff80272607>] vfs_stat+0x14/0x16
> [<ffffffff8021b703>] sys32_stat64+0x1a/0x34
> [<ffffffff80278a76>] sys_mkdir+0x13/0x15
> [<ffffffff8021b212>] ia32_sysret+0x0/0xa
>
> This first one does not look so unreasonable, the inode is new and has
> not yet been instantiated? But I'm no fs locking expert ...
>
> BUG: warning at fs/inode.c:1389/i_size_write()
>
> bl6-13:
>
> Call Trace:
> [<ffffffff80298a44>] i_size_write+0x45/0x57
> [<ffffffff802a116b>] simple_commit_write+0x3b/0x47
> [<ffffffff8028d96b>] __page_symlink+0xb5/0x150
> [<ffffffff8030b742>] ramfs_symlink+0x4d/0xb7
> [<ffffffff8028e547>] vfs_symlink+0xd4/0x144
> [<ffffffff80290d4e>] sys_symlinkat+0x86/0xd2
> [<ffffffff808e3c33>] do_header+0x70/0x1d2
> [<ffffffff808e2bd5>] do_symlink+0x4b/0x7b
> [<ffffffff808e2a55>] write_buffer+0x1d/0x2b
> [<ffffffff808e2acf>] flush_window+0x6c/0xca
> [<ffffffff808e3097>] inflate_codes+0x38f/0x3ec
> [<ffffffff808e428a>] inflate_dynamic+0x4f5/0x541
> [<ffffffff808e479a>] unpack_to_rootfs+0x4c4/0x923
> [<ffffffff808e4c83>] populate_rootfs+0x8a/0xde
> [<ffffffff8020715a>] init+0x114/0x346
> [<ffffffff8020a925>] child_rip+0xa/0x15
> [<ffffffff803e0d6e>] acpi_ds_init_one_object+0x0/0x82
> [<ffffffff803e0d6e>] acpi_ds_init_one_object+0x0/0x82
> [<ffffffff80207046>] init+0x0/0x346
> [<ffffffff8020a91b>] child_rip+0x0/0x15
>
> -apw
>
I get this too, running an intel core duo on an asus p5b, but everything is
running 32bit compiled programs., same kernel as well.
BUG: warning at fs/inode.c:1389/i_size_write()
[<c017d450>] i_size_write+0x70/0x80
[<c01ab051>] ext3_journalled_commit_write+0xf1/0x120
[<c01aab80>] commit_write_fn+0x0/0x70
[<c01aaf60>] ext3_journalled_commit_write+0x0/0x120
[<c0171b50>] __page_symlink+0x90/0x170
[<c01aed00>] ext3_symlink+0x80/0x1c0
[<c012d298>] __capable+0x8/0x20
[<c01aec80>] ext3_symlink+0x0/0x1c0
[<c01726a0>] vfs_symlink+0x80/0xa0
[<c01747e2>] sys_symlinkat+0xb2/0xe0
[<c011cd2c>] do_page_fault+0x32c/0x630
[<c0174830>] sys_symlink+0x20/0x30
[<c0103252>] sysenter_past_esp+0x5f/0x85
=======================
On Wed, 18 Oct 2006, Andrew Morton wrote:
> I simply dropped the debugging patch. Which is pretty sad, because it
> _is_ a really nasty and subtle-to-show bug. So I'd be OK with adding
> sufficient patches to -mm to make the false positives go away so we can
> re-add the check.
What about this one?
[PATCH] Fix spurious warning in i_size_write()
i_size_write() can be legitimately called without inode->i_mutex locked.
This is OK in cases when the inode has not been yet linked into the parent
dentry, so no race condition on i_size can occur.
Signed-off-by: Jiri Kosina <[email protected]>
---
fs/inode.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index bb88835..11d8794 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1386,7 +1386,9 @@ void __init inode_init(unsigned long mem
void i_size_write(struct inode *inode, loff_t i_size)
{
- WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+ /* calling us without i_mutex is OK when not connected to dentry yet */
+ if (list_empty(&inode->i_dentry))
+ WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
write_seqcount_begin(&inode->i_size_seqcount);
inode->i_size = i_size;
diff --git a/fs/namei.c b/fs/namei.c
--
Jiri Kosina
On Wed, 2006-10-18 at 15:44 -0700, Andrew Morton wrote:
> On Wed, 18 Oct 2006 10:58:23 -0700
> Badari Pulavarty <[email protected]> wrote:
>
> > > > No. seems to be generic issue .. (happens with ext3 also) :(
> > >
> > > I think I may have missed a fix for ext3 ordered and journalled too
> > > (I've just sent a patch to Andrew privately).
> > >
> > > Sorry. Can you try with ext2? Alternatively, try with ext3 or reiserfs
> > > and change the line in mm/filemap.c:generic_file_buffered_write from
> > >
> > > status = a_ops->commit_write(file, page, offset, offset+copied);
> > > to
> > > status = a_ops->commit_write(file, page, offset, offset+bytes);
> > >
> > > and see if that solves your problem (that will result in rubbish being
> > > temporarily visible, but there is a similar problem upstream anyway, so it
> > > shouldn't cause other failures in your test).
> >
> > No. Above change didn't help either :(
> >
> > Thanks,
> > Badari
> >
> > BUG: soft lockup detected on CPU#1!
>
> We should have got an all-CPU backtrace via the fancy new trigger_all_cpu_backtrace()
> thing.
Yes. Thought so..
>
> Is the NMI watchdog ticking over?
I think so.
# dmesg | grep NMI
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
testing NMI watchdog ... OK.
Thanks,
Badari
On Thu, 19 Oct 2006, Jiri Kosina wrote:
> void i_size_write(struct inode *inode, loff_t i_size)
> {
> - WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
> + /* calling us without i_mutex is OK when not connected to dentry yet */
> + if (list_empty(&inode->i_dentry))
> + WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
> #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
> write_seqcount_begin(&inode->i_size_seqcount);
> inode->i_size = i_size;
> diff --git a/fs/namei.c b/fs/namei.c
This if of course bogus, the one below should be better, sorry
[PATCH] Fix spurious warning in i_size_write
i_size_write() can be legitimately called without inode->i_mutex locked.
This is OK in cases when the inode has not been yet linked into
the parent dentry, so no race condition on i_size can occur.
Signed-off-by: Jiri Kosina <[email protected]>
---
fs/inode.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/fs/inode.c b/fs/inode.c
index bb88835..11d8794 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1386,7 +1386,9 @@ void __init inode_init(unsigned long mem
void i_size_write(struct inode *inode, loff_t i_size)
{
- WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+ /* calling us without i_mutex is OK when not connected to dentry yet */
+ if (!list_empty(&inode->i_dentry))
+ WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
write_seqcount_begin(&inode->i_size_seqcount);
inode->i_size = i_size;
--
Jiri Kosina
On Thu, 19 Oct 2006 01:04:42 +0200 (CEST)
Jiri Kosina <[email protected]> wrote:
> This if of course bogus, the one below should be better, sorry
>
> [PATCH] Fix spurious warning in i_size_write
OK, thanks - let's give that a try, see how it goes.
On Wed, 18 Oct 2006 16:01:05 -0700
Badari Pulavarty <[email protected]> wrote:
> > Is the NMI watchdog ticking over?
>
> I think so.
>
> # dmesg | grep NMI
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> testing NMI watchdog ... OK.
What does it say in /proc/interrupts?
The x86_64 nmi watchdog handling looks rather complex.
<checks a couple of x86-64 machines>
The /proc/interrutps NMI count seems to be going up by about
one-per-minute. How odd. Maybe you just need to wait longer.
Or try booting with nmi_watchdog=2 (Documentation/x86_64/boot-options.txt).
There's an empty directory /sys/devices/system/lapic_nmi/lapic_nmi0/. I
wonder what that does?
On Thu, 2006-10-19 at 04:31 +1000, Nick Piggin wrote:
> Nick Piggin wrote:
>
> > I can't see anything yet, but I'll keep looking (and try to reproduce
> > if I can get TLP working).
>
> Ah, it is probably exercising the -EFAULT path, and the code in
> Andrew's tree goes into an infinite loop I think.
>
> We can't test for a fault off the atomic copy, because that needn't
> indicate an unmapped area. What we need to do is change
> fault_in_pages_readable to return ret, and catch and return that
> in the caller if it is an error.
>
> My usual workstation is down ATM otherwise I would send you a patch.
> Unless someone beats me to it, I'll send you one tomorrow.
>
> Thanks,
> Nick
>
Here is the test case which reproduces the problem on my ppc box
consistently. But happens occasionally on amd64 box.
But writev01 test from LTP always hits the problem on amd64 & ppc64.
Thanks,
Badari
Here is the strace output:
# strace /tmp/tst
execve("/tmp/tst", ["/tmp/tst"], [/* 64 vars */]) = 0
uname({sys="Linux", node="elm3b155", ...}) = 0
brk(0) = 0x10020000
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=99239, ...}) = 0
mmap(NULL, 99239, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40030000
close(3) = 0
open("/lib/tls/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\1\274"...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1401050, ...}) = 0
mmap(0xfeb0000, 1272876, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0xfeb0000
madvise(0xfeb0000, 1272876, MADV_SEQUENTIAL|0x1) = 0
mmap(0xffd0000, 131072, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|
MAP_FIXED, 3, 0x110000) = 0xffd0000
close(3) = 0
munmap(0x40030000, 99239) = 0
open("writev_data_file", O_RDWR|O_CREAT, 0666) = 3
writev(3, [{"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
64}, {ptrace: umoven: Input/output error
0xffffffff, 64}, {"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0
\0"..., 64}], 3
Test (shamelessly yanked it from writev01 test):
=================================================
#include <stdio.h>
#include <sys/types.h>
#include <signal.h>
#include <sys/uio.h>
#include <sys/fcntl.h>
#include <memory.h>
#include <errno.h>
#include <sys/mman.h>
#define K_1 1024
#define CHUNK 64 /* single chunk */
#define MAX_IOVEC 16
#define DATA_FILE "writev_data_file"
char buf1[K_1], buf2[K_1], buf3[K_1];
struct iovec wr_iovec[MAX_IOVEC] = {
{buf1, CHUNK},
{(caddr_t)-1, CHUNK},
{(buf1 + CHUNK), CHUNK},
};
int main()
{
int fd, ret;
if ((fd = open(DATA_FILE, O_RDWR|O_CREAT, 0666)) < 0) {
perror("open failed");
exit(1);
}
ret = writev(fd, wr_iovec, 3);
if (ret < 0) {
perror("writev failed");
exit(2);
}
close(fd);
}
On Wed, 2006-10-18 at 16:25 -0700, Andrew Morton wrote:
> On Wed, 18 Oct 2006 16:01:05 -0700
> Badari Pulavarty <[email protected]> wrote:
>
> > > Is the NMI watchdog ticking over?
> >
> > I think so.
> >
> > # dmesg | grep NMI
> > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> > testing NMI watchdog ... OK.
>
>
> What does it say in /proc/interrupts?
>
> The x86_64 nmi watchdog handling looks rather complex.
>
> <checks a couple of x86-64 machines>
>
> The /proc/interrutps NMI count seems to be going up by about
> one-per-minute. How odd. Maybe you just need to wait longer.
While the soft lock up messages are getting printed..
(waited for 5 min for these messages)..
# while :; do grep NMI /proc/interrupts; sleep 30; done
NMI: 265 73 41 47
NMI: 265 81 62 47
NMI: 265 81 71 69
NMI: 265 81 93 77
NMI: 265 81 101 99
NMI: 288 82 101 107
NMI: 296 82 131 129
NMI: 296 82 153 137
NMI: 296 82 161 160
NMI: 296 105 161 167
NMI: 296 112 184 167
Looking at the messages, I don't think trace all cpus
is working ..
BUG: soft lockup detected on CPU#1!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#0!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#0!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#0!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#3!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#1!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
BUG: soft lockup detected on CPU#1!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x120
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
Thanks,
Badari
On Wed, 18 Oct 2006 17:07:59 -0700
Badari Pulavarty <[email protected]> wrote:
> > What does it say in /proc/interrupts?
> >
> > The x86_64 nmi watchdog handling looks rather complex.
> >
> > <checks a couple of x86-64 machines>
> >
> > The /proc/interrutps NMI count seems to be going up by about
> > one-per-minute. How odd. Maybe you just need to wait longer.
>
>
> While the soft lock up messages are getting printed..
> (waited for 5 min for these messages)..
>
> # while :; do grep NMI /proc/interrupts; sleep 30; done
> NMI: 265 73 41 47
> NMI: 265 81 62 47
> NMI: 265 81 71 69
> NMI: 265 81 93 77
> NMI: 265 81 101 99
> NMI: 288 82 101 107
> NMI: 296 82 131 129
> NMI: 296 82 153 137
> NMI: 296 82 161 160
> NMI: 296 105 161 167
> NMI: 296 112 184 167
>
> Looking at the messages, I don't think trace all cpus
> is working ..
nfi what's going on there. On my Conroe machine each CPU's NMI count goes
up by what apepars to be one-per-second when the CPUs are flat out busy,
but the count increases by random small amounts (like yours) when the
machine is idle.
Did you try setting nmi_watchdog=?
Andrew Morton <[email protected]> writes:
> On Wed, 18 Oct 2006 16:01:05 -0700
> Badari Pulavarty <[email protected]> wrote:
>
> > > Is the NMI watchdog ticking over?
> >
> > I think so.
> >
> > # dmesg | grep NMI
> > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> > testing NMI watchdog ... OK.
>
>
> What does it say in /proc/interrupts?
>
> The x86_64 nmi watchdog handling looks rather complex.
>
> <checks a couple of x86-64 machines>
>
> The /proc/interrutps NMI count seems to be going up by about
> one-per-minute. How odd. Maybe you just need to wait longer.
That's consistent with a idle machine. The perfctr used by the nmi
watchdog only increases when the CPU isn't halted and when it's idle
it's not doing very much. When something actually loops it should
increase much faster though.
-Andi
Hello,
Multiple of verif were found with 2.6.19-rc2-mm1 kernel:
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f4e410>] 0xb7f4e410
=======================
dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f4e410>] 0xb7f4e410
Full dmesg and config attached. System info:
Linux orion 2.6.19-rc2 #3 PREEMPT Thu Oct 19 16:04:17 CEST 2006 i686 Intel(R)
Pentium(R) 4 CPU 2.40GHz GNU/Linux
Gnu C 4.1.1
Gnu make 3.81
binutils 2.16.1
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.39
pcmcia-cs 3.2.8
nfs-utils 1.0.6
Linux C Library > libc.2.4
Dynamic linker (ldd) 2.4
Procps 3.2.6
Net-tools 1.60
Kbd 1.12
Sh-utils 5.94
udev 087
Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
yenta_socket rsrc_nonstatic pcmcia_core
Regards,
Mariusz Kozlowski
On Wed, 2006-10-18 at 17:21 -0700, Andrew Morton wrote:
> On Wed, 18 Oct 2006 17:07:59 -0700
> Badari Pulavarty <[email protected]> wrote:
>
> > > What does it say in /proc/interrupts?
> > >
> > > The x86_64 nmi watchdog handling looks rather complex.
> > >
> > > <checks a couple of x86-64 machines>
> > >
> > > The /proc/interrutps NMI count seems to be going up by about
> > > one-per-minute. How odd. Maybe you just need to wait longer.
> >
> >
> > While the soft lock up messages are getting printed..
> > (waited for 5 min for these messages)..
> >
> > # while :; do grep NMI /proc/interrupts; sleep 30; done
> > NMI: 265 73 41 47
> > NMI: 265 81 62 47
> > NMI: 265 81 71 69
> > NMI: 265 81 93 77
> > NMI: 265 81 101 99
> > NMI: 288 82 101 107
> > NMI: 296 82 131 129
> > NMI: 296 82 153 137
> > NMI: 296 82 161 160
> > NMI: 296 105 161 167
> > NMI: 296 112 184 167
> >
> > Looking at the messages, I don't think trace all cpus
> > is working ..
>
> nfi what's going on there. On my Conroe machine each CPU's NMI count goes
> up by what apepars to be one-per-second when the CPUs are flat out busy,
> but the count increases by random small amounts (like yours) when the
> machine is idle.
>
> Did you try setting nmi_watchdog=?
Yes. I did try that and its the same result..
I realized that we are on a wrong path. The messages I am getting
are from softlock code (not spinlock debug code). There is no
call to trigger_all_cpu_backtrace() from softlock detection code.
Just for experiment, I added the call and it tried to show the
stacks of other CPUs - but CPU2 itself took an NMI and ran into
hardlock up panic.I guess other CPUs didn't get time to
dump their stacks :(
BTW, other problem is stack traces are useless (thanks to
CONFIG_UNWIND_STACK) ..
Thanks,
Badari
BUG: soft lockup detected on CPU#2!
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8024bbca>] softlockup_tick+0xfa/0x140
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
NMI backtrace for cpu 2
Call Trace:
[<ffffffff8020b481>] show_trace+0x41/0x70
[<ffffffff8020b4c2>] dump_stack+0x12/0x20
[<ffffffff8021946c>] nmi_watchdog_tick+0xec/0x2a0
[<ffffffff8020c911>] default_do_nmi+0x91/0x200
[<ffffffff80219645>] do_nmi+0x25/0x40
[<ffffffff80481b3f>] nmi+0x7f/0x90
[<ffffffff8032856a>] __delay+0xa/0x20
[<ffffffff80218af7>] __trigger_all_cpu_backtrace+0x27/0x40
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
NMI Watchdog detected LOCKUP on CPU 2
CPU 2
Modules linked in: thermal processor fan button loop dm_mod md_mod
Pid: 3724, comm: writev01 Not tainted 2.6.19-rc2-mm1 #8
RIP: 0010:[<ffffffff80328566>] [<ffffffff80328566>] __delay+0x6/0x20
RSP: 0018:ffff8101dfcd7f50 EFLAGS: 00000093
RAX: 00000000000f6c99 RBX: 0000000000001a10 RCX: 00000000e37f89c7
RDX: 000000000000004d RSI: 0000000000000046 RDI: 00000000001554eb
RBP: 0000000000000002 R08: 0000000000003b71 R09: 000000000000000e
R10: 0000000000000006 R11: ffffffff80335f10 R12: 0000000000000000
R13: ffff8101dba9aec0 R14: 0000000000000000 R15: ffff8101d71b39f8
FS: 00002ad6d94526d0(0000) GS:ffff8101dfc80cc0(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002ad6d9121000 CR3: 00000001d4d8d000 CR4: 00000000000006e0
Process writev01 (pid: 3724, threadinfo ffff8101d71b2000, task
ffff8101dc68c300)
Stack: ffffffff80218af7 ffff8101dc68c300 ffffffff802322e7
ffffffff8069dd70
ffff8101d71b3870 0000000000000000 ffffffff80218104 0000000000000000
ffffffff8021885b 0000000000000001 0000000000000001 ffff8101dba9af20
Call Trace:
[<ffffffff80218af7>] __trigger_all_cpu_backtrace+0x27/0x40
[<ffffffff802322e7>] update_process_times+0x57/0x90
[<ffffffff80218104>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff8021885b>] smp_apic_timer_interrupt+0x4b/0x80
[<ffffffff8020a7e6>] apic_timer_interrupt+0x66/0x70
[<0000000000000010>]
Code: 0f 31 29 c8 48 39 f8 72 f5 f3 c3 66 66 66 90 66 66 66 90 66
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
Andrew Morton wrote:
> The page we're writing into isn't locked, so there's no deadlock afaict.
>
> But then, I forget how xip works. Carsten, is it actually being used for
> anything?
>
The comment may be superfluous. I did not quite understand the deadlock
condition refered to by the comment in filemap, therefore I cut&pasted
it over. I will send a patch that removes it.
Carsten
On 19 Oct 2006 14:32:11 +0200
Andi Kleen <[email protected]> wrote:
> Andrew Morton <[email protected]> writes:
>
> > On Wed, 18 Oct 2006 16:01:05 -0700
> > Badari Pulavarty <[email protected]> wrote:
> >
> > > > Is the NMI watchdog ticking over?
> > >
> > > I think so.
> > >
> > > # dmesg | grep NMI
> > > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> > > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> > > testing NMI watchdog ... OK.
> >
> >
> > What does it say in /proc/interrupts?
> >
> > The x86_64 nmi watchdog handling looks rather complex.
> >
> > <checks a couple of x86-64 machines>
> >
> > The /proc/interrutps NMI count seems to be going up by about
> > one-per-minute. How odd. Maybe you just need to wait longer.
>
> That's consistent with a idle machine. The perfctr used by the nmi
> watchdog only increases when the CPU isn't halted and when it's idle
> it's not doing very much. When something actually loops it should
> increase much faster though.
>
ok..
What is the reason for not using an apic/lapic NMI source for the watchdog?
>
> What is the reason for not using an apic/lapic NMI source for the watchdog?
That is nmi_watchdog=2. But then the watchdog would run at full HZ frequency and
use a lot of CPU time unnecessarily
-Andi
On Thu, 19 Oct 2006 16:45:39 +0200
Mariusz Kozlowski <[email protected]> wrote:
> Hello,
>
> Multiple of verif were found with 2.6.19-rc2-mm1 kernel:
>
> slab error in verify_redzone_free(): cache `size-32': memory outside object
> was overwritten
> [<c0103765>] dump_trace+0x1c1/0x1f1
> [<c01037af>] show_trace_log_lvl+0x1a/0x30
> [<c0103ed8>] show_trace+0x12/0x14
> [<c0103f7b>] dump_stack+0x19/0x1b
> [<c0158357>] __slab_error+0x26/0x28
> [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
> [<c0158bb0>] kfree+0x54/0xa5
> [<c037fba4>] ioctl_standard_call+0x187/0x2a1
> [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
> [<c03763d4>] dev_ioctl+0x1fd/0x372
> [<c036b080>] sock_ioctl+0x34/0x1e8
> [<c0167a92>] do_ioctl+0x22/0x71
> [<c0167b36>] vfs_ioctl+0x55/0x29b
> [<c0167daf>] sys_ioctl+0x33/0x50
> [<c0102ff5>] sysenter_past_esp+0x56/0x79
> [<b7f4e410>] 0xb7f4e410
> =======================
> dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
> slab error in verify_redzone_free(): cache `size-32': memory outside object
> was overwritten
> [<c0103765>] dump_trace+0x1c1/0x1f1
> [<c01037af>] show_trace_log_lvl+0x1a/0x30
> [<c0103ed8>] show_trace+0x12/0x14
> [<c0103f7b>] dump_stack+0x19/0x1b
> [<c0158357>] __slab_error+0x26/0x28
> [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
> [<c0158bb0>] kfree+0x54/0xa5
> [<c037fba4>] ioctl_standard_call+0x187/0x2a1
> [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
> [<c03763d4>] dev_ioctl+0x1fd/0x372
> [<c036b080>] sock_ioctl+0x34/0x1e8
> [<c0167a92>] do_ioctl+0x22/0x71
> [<c0167b36>] vfs_ioctl+0x55/0x29b
> [<c0167daf>] sys_ioctl+0x33/0x50
> [<c0102ff5>] sysenter_past_esp+0x56/0x79
> [<b7f4e410>] 0xb7f4e410
The wireless ioctls are still blowing up? I thought we'd fixed that,
or is this something new?
> Full dmesg and config attached. System info:
>
> Linux orion 2.6.19-rc2 #3 PREEMPT Thu Oct 19 16:04:17 CEST 2006 i686 Intel(R)
> Pentium(R) 4 CPU 2.40GHz GNU/Linux
>
> Gnu C 4.1.1
> Gnu make 3.81
> binutils 2.16.1
> util-linux 2.12r
> mount 2.12r
> module-init-tools 3.2.2
> e2fsprogs 1.39
> pcmcia-cs 3.2.8
> nfs-utils 1.0.6
> Linux C Library > libc.2.4
> Dynamic linker (ldd) 2.4
> Procps 3.2.6
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 5.94
> udev 087
> Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
> yenta_socket rsrc_nonstatic pcmcia_core
>
> Regards,
>
> Mariusz Kozlowski
>
On Thu, Oct 19, 2006 at 10:03:42AM -0700, Andrew Morton wrote:
> On Thu, 19 Oct 2006 16:45:39 +0200
> Mariusz Kozlowski <[email protected]> wrote:
>
> > Hello,
> >
> > Multiple of verif were found with 2.6.19-rc2-mm1 kernel:
> >
> > slab error in verify_redzone_free(): cache `size-32': memory outside object
> > was overwritten
> > [<c0103765>] dump_trace+0x1c1/0x1f1
> > [<c01037af>] show_trace_log_lvl+0x1a/0x30
> > [<c0103ed8>] show_trace+0x12/0x14
> > [<c0103f7b>] dump_stack+0x19/0x1b
> > [<c0158357>] __slab_error+0x26/0x28
> > [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
> > [<c0158bb0>] kfree+0x54/0xa5
> > [<c037fba4>] ioctl_standard_call+0x187/0x2a1
> > [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
> > [<c03763d4>] dev_ioctl+0x1fd/0x372
> > [<c036b080>] sock_ioctl+0x34/0x1e8
> > [<c0167a92>] do_ioctl+0x22/0x71
> > [<c0167b36>] vfs_ioctl+0x55/0x29b
> > [<c0167daf>] sys_ioctl+0x33/0x50
> > [<c0102ff5>] sysenter_past_esp+0x56/0x79
> > [<b7f4e410>] 0xb7f4e410
> > =======================
> > dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
> > slab error in verify_redzone_free(): cache `size-32': memory outside object
> > was overwritten
> > [<c0103765>] dump_trace+0x1c1/0x1f1
> > [<c01037af>] show_trace_log_lvl+0x1a/0x30
> > [<c0103ed8>] show_trace+0x12/0x14
> > [<c0103f7b>] dump_stack+0x19/0x1b
> > [<c0158357>] __slab_error+0x26/0x28
> > [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
> > [<c0158bb0>] kfree+0x54/0xa5
> > [<c037fba4>] ioctl_standard_call+0x187/0x2a1
> > [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
> > [<c03763d4>] dev_ioctl+0x1fd/0x372
> > [<c036b080>] sock_ioctl+0x34/0x1e8
> > [<c0167a92>] do_ioctl+0x22/0x71
> > [<c0167b36>] vfs_ioctl+0x55/0x29b
> > [<c0167daf>] sys_ioctl+0x33/0x50
> > [<c0102ff5>] sysenter_past_esp+0x56/0x79
> > [<b7f4e410>] 0xb7f4e410
>
> The wireless ioctls are still blowing up? I thought we'd fixed that,
> or is this something new?
Do you know which driver the user is using ? Is it an
in-kernel driver, or an out-of-kernel driver ?
Thanks !
Jean
Hello,
> > The wireless ioctls are still blowing up? I thought we'd fixed that,
> > or is this something new?
>
> Do you know which driver the user is using ? Is it an
> in-kernel driver, or an out-of-kernel driver ?
> Thanks !
The wifi card is Cabletron Entersys Roamabout and the driver is an orinoco
driver that comes with vanilla kernel. Here is what lsmod says:
orinoco_cs 14340 1
orinoco 38932 1 orinoco_cs
hermes 6784 2 orinoco_cs,orinoco
pcmcia 32176 5 orinoco_cs
firmware_class 8448 1 pcmcia
yenta_socket 24204 6
rsrc_nonstatic 11776 1 yenta_socket
pcmcia_core 35616 4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
And these are the relevant syslog lines:
orinoco 0.15 (David Gibson <[email protected]>, Pavel Roskin
<[email protected]>, et al)
orinoco_cs 0.15 (David Gibson <[email protected]>, Pavel Roskin
<[email protected]>, et al)
pcmcia: registering new device pcmcia1.0
eth0: Hardware identity 0001:0001:0004:0000
eth0: Station identity 001f:0001:0008:0048
eth0: Firmware determined as Lucent/Agere 8.72
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:E0:63:82:2D:3F
eth0: Station name "HERMES I"
eth0: ready
eth0: orinoco_cs at 1.0, irq 3, io 0x0100-0x013f
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f4e410>] 0xb7f4e410
=======================
dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f4e410>] 0xb7f4e410
=======================
dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f96410>] 0xb7f96410
=======================
dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f96410>] 0xb7f96410
=======================
dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f8a410>] 0xb7f8a410
=======================
dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f8a410>] 0xb7f8a410
=======================
dd20cab4: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
eth0: New link status: Connected (0001)
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7fa2410>] 0xb7fa2410
=======================
dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f2c410>] 0xb7f2c410
=======================
dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f2c410>] 0xb7f2c410
=======================
dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7eef410>] 0xb7eef410
=======================
dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7eef410>] 0xb7eef410
=======================
dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
slab error in verify_redzone_free(): cache `size-32': memory outside object
was overwritten
[<c0103765>] dump_trace+0x1c1/0x1f1
[<c01037af>] show_trace_log_lvl+0x1a/0x30
[<c0103ed8>] show_trace+0x12/0x14
[<c0103f7b>] dump_stack+0x19/0x1b
[<c0158357>] __slab_error+0x26/0x28
[<c0158496>] cache_free_debugcheck+0x13d/0x1d8
[<c0158bb0>] kfree+0x54/0xa5
[<c037fba4>] ioctl_standard_call+0x187/0x2a1
[<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
[<c03763d4>] dev_ioctl+0x1fd/0x372
[<c036b080>] sock_ioctl+0x34/0x1e8
[<c0167a92>] do_ioctl+0x22/0x71
[<c0167b36>] vfs_ioctl+0x55/0x29b
[<c0167daf>] sys_ioctl+0x33/0x50
[<c0102ff5>] sysenter_past_esp+0x56/0x79
[<b7f59410>] 0xb7f59410
=======================
dde2ac98: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
Mariusz Kozlowski
On Thu, 19 Oct 2006 10:17:27 -0700
Jean Tourrilhes <[email protected]> wrote:
> On Thu, Oct 19, 2006 at 10:03:42AM -0700, Andrew Morton wrote:
> > On Thu, 19 Oct 2006 16:45:39 +0200
> > Mariusz Kozlowski <[email protected]> wrote:
> >
> > > Hello,
> > >
> > > Multiple of verif were found with 2.6.19-rc2-mm1 kernel:
> > >
> > > slab error in verify_redzone_free(): cache `size-32': memory outside object
> > > was overwritten
> > > [<c0103765>] dump_trace+0x1c1/0x1f1
> > > [<c01037af>] show_trace_log_lvl+0x1a/0x30
> > > [<c0103ed8>] show_trace+0x12/0x14
> > > [<c0103f7b>] dump_stack+0x19/0x1b
> > > [<c0158357>] __slab_error+0x26/0x28
> > > [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
> > > [<c0158bb0>] kfree+0x54/0xa5
> > > [<c037fba4>] ioctl_standard_call+0x187/0x2a1
> > > [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
> > > [<c03763d4>] dev_ioctl+0x1fd/0x372
> > > [<c036b080>] sock_ioctl+0x34/0x1e8
> > > [<c0167a92>] do_ioctl+0x22/0x71
> > > [<c0167b36>] vfs_ioctl+0x55/0x29b
> > > [<c0167daf>] sys_ioctl+0x33/0x50
> > > [<c0102ff5>] sysenter_past_esp+0x56/0x79
> > > [<b7f4e410>] 0xb7f4e410
> > > =======================
> > > dd20cb64: redzone 1:0x170fc2a5, redzone 2:0x170fc200.
> > > slab error in verify_redzone_free(): cache `size-32': memory outside object
> > > was overwritten
> > > [<c0103765>] dump_trace+0x1c1/0x1f1
> > > [<c01037af>] show_trace_log_lvl+0x1a/0x30
> > > [<c0103ed8>] show_trace+0x12/0x14
> > > [<c0103f7b>] dump_stack+0x19/0x1b
> > > [<c0158357>] __slab_error+0x26/0x28
> > > [<c0158496>] cache_free_debugcheck+0x13d/0x1d8
> > > [<c0158bb0>] kfree+0x54/0xa5
> > > [<c037fba4>] ioctl_standard_call+0x187/0x2a1
> > > [<c037ffe6>] wireless_process_ioctl+0x328/0x3c7
> > > [<c03763d4>] dev_ioctl+0x1fd/0x372
> > > [<c036b080>] sock_ioctl+0x34/0x1e8
> > > [<c0167a92>] do_ioctl+0x22/0x71
> > > [<c0167b36>] vfs_ioctl+0x55/0x29b
> > > [<c0167daf>] sys_ioctl+0x33/0x50
> > > [<c0102ff5>] sysenter_past_esp+0x56/0x79
> > > [<b7f4e410>] 0xb7f4e410
> >
> > The wireless ioctls are still blowing up? I thought we'd fixed that,
> > or is this something new?
>
> Do you know which driver the user is using ? Is it an
> in-kernel driver, or an out-of-kernel driver ?
> Thanks !
>
Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
yenta_socket rsrc_nonstatic pcmcia_core
The full dmesg is on the mailing list - I'll forward it to you.
On Thu, Oct 19, 2006 at 10:25:29AM -0700, Andrew Morton wrote:
> >
> > Do you know which driver the user is using ? Is it an
> > in-kernel driver, or an out-of-kernel driver ?
> > Thanks !
> >
>
> Modules Loaded orinoco_cs orinoco hermes pcmcia firmware_class
> yenta_socket rsrc_nonstatic pcmcia_core
>
> The full dmesg is on the mailing list - I'll forward it to you.
It's the same bug as before.
The user is *not* using 2.6.19-rc2-mm1, but 2.6.19-rc2 :
---------------------------------------------------
Linux version 2.6.19-rc2 (root@orion) (gcc version 4.1.1 (Gentoo 4.1.1)) #3 PREEMPT Thu Oct 19 16:04:17 CEST 2006
---------------------------------------------------
The Orinoco fix is in 2.6.19-rc2-mm1, but it is *not* in
2.6.19-rc2.
John : the current code is 2.6.19-rc2 is definitely not
releasable. Either we back out WE-21, or we fix it, but doing nothing
at this point is a receipe for disaster.
I submitted to you 3 patches to fix WE-21 in 2.6.19-rc2 :
o Orinoco SLAB fix
o Other driver slab fix
o WE-20 ESSID backward compatibility
Those patches were fixing real problems and tested on my side.
If those patches are not planned to go in 2.6.19-rc2, I ask
again that WE-21 be removed from 2.6.19.
Thanks in advance...
Jean
Carsten Otte wrote:
> Andrew Morton wrote:
>
>> The page we're writing into isn't locked, so there's no deadlock afaict.
>>
>> But then, I forget how xip works. Carsten, is it actually being used for
>> anything?
>>
>
> The comment may be superfluous. I did not quite understand the deadlock
> condition refered to by the comment in filemap, therefore I cut&pasted
> it over. I will send a patch that removes it.
Yes, it wasn't a good comment. Basically we can't hold the page lock and
then enter the page fault handler. mm-fix-pagecache-write-deadlocks.patch
has quite a lot of comments to explain it.
I don't believe filemap_xip holds the page lock, so you don't need to do
the atomic copy, and you don't need to do the fault_in_pages_readable.
--
SUSE Labs, Novell Inc.
Send instant messages to your online friends http://au.messenger.yahoo.com
Hi,
> It's the same bug as before.
> The user is *not* using 2.6.19-rc2-mm1, but 2.6.19-rc2 :
Hmmm ... weird. I did fetch -mm1 with git like this:
git fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git v2.6.19-rc2-mm1
then make oldconfig && make && ... Will investigate. Sorry for the noise then.
Mariusz Kozlowski
On Thu, Oct 19, 2006 at 08:31:09PM +0200, Mariusz Kozlowski wrote:
> Hi,
>
> > It's the same bug as before.
> > The user is *not* using 2.6.19-rc2-mm1, but 2.6.19-rc2 :
>
> Hmmm ... weird. I did fetch -mm1 with git like this:
>
> git fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git v2.6.19-rc2-mm1
>
> then make oldconfig && make && ... Will investigate. Sorry for the noise then.
>
No, it was actually helpful. 2.6.19-rc2 should be fixed, I was
expecting my patches were included and was surprised they were not.
> Mariusz Kozlowski
Thanks !
Jean
Nick Piggin wrote:
> I don't believe filemap_xip holds the page lock, so you don't need to do
> the atomic copy, and you don't need to do the fault_in_pages_readable.
No, we don't hold the page lock. Xip pages are property of the block
device driver, are not in the page lru, and by calling get_xip_page we
retrieved a reference to that page which remains valid until the file
system is unmounted / the block device is closed.
Andrew Morton wrote:
> On Tue, 17 Oct 2006 17:45:29 +0200
> Cedric Le Goater <[email protected]> wrote:
>
>
>>> +mm-fix-pagecache-write-deadlocks.patch
>>>
> <looks>
>
> I think it might actually be that simple. I expected a lot more fuss than
> that.
>
>
This actually makes it compile&run again. Therefore I vote for inclusion.
I will look into Nick's suggestion of replacing it by a non-atomic
variant later on, after fixing a page refcounting issue with xip and cow
that was introduced by Nicks changes.
Acked-by: Carsten Otte <[email protected]>