Hi,
A set of two fixes for the IPU plane of the ingenic-drm driver.
Patch [1/2] changes the type of the IPU plane from PRIMARY to OVERLAY,
since there can only be one PRIMARY plane per CRTC.
Patch [2/2] enforces that a full modeset is only performed when the
"sharpness" property is modified.
Cheers,
-Paul
Paul Cercueil (2):
drm/ingenic: Switch IPU plane to type OVERLAY
drm/ingenic: Don't request full modeset if property is not modified
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++------
drivers/gpu/drm/ingenic/ingenic-ipu.c | 6 ++++--
2 files changed, 9 insertions(+), 8 deletions(-)
--
2.30.2
Avoid requesting a full modeset if the sharpness property is not
modified, because then we don't actually need it.
Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Cc: <[email protected]> # 5.8+
Signed-off-by: Paul Cercueil <[email protected]>
---
drivers/gpu/drm/ingenic/ingenic-ipu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c b/drivers/gpu/drm/ingenic/ingenic-ipu.c
index 3b1091e7c0cd..95b665c4a7b0 100644
--- a/drivers/gpu/drm/ingenic/ingenic-ipu.c
+++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
@@ -640,10 +640,12 @@ ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane,
{
struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
struct drm_crtc_state *crtc_state;
+ bool mode_changed;
if (property != ipu->sharpness_prop)
return -EINVAL;
+ mode_changed = val != ipu->sharpness;
ipu->sharpness = val;
if (state->crtc) {
@@ -651,7 +653,7 @@ ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane,
if (WARN_ON(!crtc_state))
return -EINVAL;
- crtc_state->mode_changed = true;
+ crtc_state->mode_changed |= mode_changed;
}
return 0;
--
2.30.2
It should have been an OVERLAY from the beginning. The documentation
stipulates that there should be an unique PRIMARY plane per CRTC.
Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Cc: <[email protected]> # 5.8+
Signed-off-by: Paul Cercueil <[email protected]>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++------
drivers/gpu/drm/ingenic/ingenic-ipu.c | 2 +-
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 29742ec5ab95..09225b770bb8 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -419,7 +419,7 @@ static void ingenic_drm_plane_enable(struct ingenic_drm *priv,
unsigned int en_bit;
if (priv->soc_info->has_osd) {
- if (plane->type == DRM_PLANE_TYPE_PRIMARY)
+ if (plane != &priv->f0)
en_bit = JZ_LCD_OSDC_F1EN;
else
en_bit = JZ_LCD_OSDC_F0EN;
@@ -434,7 +434,7 @@ void ingenic_drm_plane_disable(struct device *dev, struct drm_plane *plane)
unsigned int en_bit;
if (priv->soc_info->has_osd) {
- if (plane->type == DRM_PLANE_TYPE_PRIMARY)
+ if (plane != &priv->f0)
en_bit = JZ_LCD_OSDC_F1EN;
else
en_bit = JZ_LCD_OSDC_F0EN;
@@ -461,8 +461,7 @@ void ingenic_drm_plane_config(struct device *dev,
ingenic_drm_plane_enable(priv, plane);
- if (priv->soc_info->has_osd &&
- plane->type == DRM_PLANE_TYPE_PRIMARY) {
+ if (priv->soc_info->has_osd && plane != &priv->f0) {
switch (fourcc) {
case DRM_FORMAT_XRGB1555:
ctrl |= JZ_LCD_OSDCTRL_RGB555;
@@ -510,7 +509,7 @@ void ingenic_drm_plane_config(struct device *dev,
}
if (priv->soc_info->has_osd) {
- if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
+ if (plane != &priv->f0) {
xy_reg = JZ_REG_LCD_XYP1;
size_reg = JZ_REG_LCD_SIZE1;
} else {
@@ -561,7 +560,7 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
height = newstate->src_h >> 16;
cpp = newstate->fb->format->cpp[0];
- if (!priv->soc_info->has_osd || plane->type == DRM_PLANE_TYPE_OVERLAY)
+ if (!priv->soc_info->has_osd || plane == &priv->f0)
hwdesc = &priv->dma_hwdescs->hwdesc_f0;
else
hwdesc = &priv->dma_hwdescs->hwdesc_f1;
diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c b/drivers/gpu/drm/ingenic/ingenic-ipu.c
index 5ae6adab8306..3b1091e7c0cd 100644
--- a/drivers/gpu/drm/ingenic/ingenic-ipu.c
+++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
@@ -767,7 +767,7 @@ static int ingenic_ipu_bind(struct device *dev, struct device *master, void *d)
err = drm_universal_plane_init(drm, plane, 1, &ingenic_ipu_plane_funcs,
soc_info->formats, soc_info->num_formats,
- NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
+ NULL, DRM_PLANE_TYPE_OVERLAY, NULL);
if (err) {
dev_err(dev, "Failed to init plane: %i\n", err);
return err;
--
2.30.2
> It should have been an OVERLAY from the beginning. The documentation
> stipulates that there should be an unique PRIMARY plane per CRTC.
Thanks for the quick patch! One comment below…
> Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
> Cc: <[email protected]> # 5.8+
> Signed-off-by: Paul Cercueil <[email protected]>
> ---
> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++------
> drivers/gpu/drm/ingenic/ingenic-ipu.c | 2 +-
> 2 files changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index 29742ec5ab95..09225b770bb8 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -419,7 +419,7 @@ static void ingenic_drm_plane_enable(struct ingenic_drm *priv,
> unsigned int en_bit;
>
> if (priv->soc_info->has_osd) {
> - if (plane->type == DRM_PLANE_TYPE_PRIMARY)
> + if (plane != &priv->f0)
I don't know about this driver but… is this really the same as the previous
condition? The previous condition would match two planes, this one seems to
match only a single plane. What am I missing?
Hi Simon,
Le mar. 30 mars 2021 à 7:23, Simon Ser <[email protected]> a écrit :
>> It should have been an OVERLAY from the beginning. The documentation
>> stipulates that there should be an unique PRIMARY plane per CRTC.
>
> Thanks for the quick patch! One comment below…
>
>> Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
>> Cc: <[email protected]> # 5.8+
>> Signed-off-by: Paul Cercueil <[email protected]>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++------
>> drivers/gpu/drm/ingenic/ingenic-ipu.c | 2 +-
>> 2 files changed, 6 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index 29742ec5ab95..09225b770bb8 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -419,7 +419,7 @@ static void ingenic_drm_plane_enable(struct
>> ingenic_drm *priv,
>> unsigned int en_bit;
>>
>> if (priv->soc_info->has_osd) {
>> - if (plane->type == DRM_PLANE_TYPE_PRIMARY)
>> + if (plane != &priv->f0)
>
> I don't know about this driver but… is this really the same as the
> previous
> condition? The previous condition would match two planes, this one
> seems to
> match only a single plane. What am I missing?
There are three planes, which we will call here f0, f1, and ipu.
Previously, the "plane->type == DRM_PLANE_TYPE_PRIMARY" matched f1 and
ipu. Since ipu is now OVERLAY we have to change the condition or the
behaviour will be different, as otherwise it would only match the f1
plane.
Cheers,
-Paul
On Tuesday, March 30th, 2021 at 1:53 PM, Paul Cercueil <[email protected]> wrote:
> > I don't know about this driver but… is this really the same as the
> > previous
> > condition? The previous condition would match two planes, this one
> > seems to
> > match only a single plane. What am I missing?
>
> There are three planes, which we will call here f0, f1, and ipu.
> Previously, the "plane->type == DRM_PLANE_TYPE_PRIMARY" matched f1 and
> ipu. Since ipu is now OVERLAY we have to change the condition or the
> behaviour will be different, as otherwise it would only match the f1
> plane.
Oh okay, I thought f0 was one of the primary planes, but it's not.
Thanks for the explanation.
For the user-space visible change:
Acked-by: Simon Ser <[email protected]>
Can I have an ACK for this patch?
Cheers,
-Paul
Le lun. 29 mars 2021 ? 18:50, Paul Cercueil <[email protected]> a
?crit :
> Avoid requesting a full modeset if the sharpness property is not
> modified, because then we don't actually need it.
>
> Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
> Cc: <[email protected]> # 5.8+
> Signed-off-by: Paul Cercueil <[email protected]>
> ---
> drivers/gpu/drm/ingenic/ingenic-ipu.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c
> b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> index 3b1091e7c0cd..95b665c4a7b0 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-ipu.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> @@ -640,10 +640,12 @@ ingenic_ipu_plane_atomic_set_property(struct
> drm_plane *plane,
> {
> struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> struct drm_crtc_state *crtc_state;
> + bool mode_changed;
>
> if (property != ipu->sharpness_prop)
> return -EINVAL;
>
> + mode_changed = val != ipu->sharpness;
> ipu->sharpness = val;
>
> if (state->crtc) {
> @@ -651,7 +653,7 @@ ingenic_ipu_plane_atomic_set_property(struct
> drm_plane *plane,
> if (WARN_ON(!crtc_state))
> return -EINVAL;
>
> - crtc_state->mode_changed = true;
> + crtc_state->mode_changed |= mode_changed;
> }
>
> return 0;
> --
> 2.30.2
>
Hi,
On Mon, Mar 29, 2021 at 06:50:46PM +0100, Paul Cercueil wrote:
> Avoid requesting a full modeset if the sharpness property is not
> modified, because then we don't actually need it.
>
> Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
> Cc: <[email protected]> # 5.8+
> Signed-off-by: Paul Cercueil <[email protected]>
> ---
> drivers/gpu/drm/ingenic/ingenic-ipu.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/ingenic/ingenic-ipu.c b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> index 3b1091e7c0cd..95b665c4a7b0 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-ipu.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-ipu.c
> @@ -640,10 +640,12 @@ ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane,
> {
> struct ingenic_ipu *ipu = plane_to_ingenic_ipu(plane);
> struct drm_crtc_state *crtc_state;
> + bool mode_changed;
>
> if (property != ipu->sharpness_prop)
> return -EINVAL;
>
> + mode_changed = val != ipu->sharpness;
> ipu->sharpness = val;
>
> if (state->crtc) {
> @@ -651,7 +653,7 @@ ingenic_ipu_plane_atomic_set_property(struct drm_plane *plane,
> if (WARN_ON(!crtc_state))
> return -EINVAL;
>
> - crtc_state->mode_changed = true;
> + crtc_state->mode_changed |= mode_changed;
> }
I'd just change the condition from
if (state->crtc)
to
if (state->crtc && val != ipu->sharpness)
It's going to be easier to extend if you ever need to. Also, drivers
usually do this in atomic_check, is there a specific reason to do it in
atomic_set_property?
Maxime