The signal_read(), action_read(), and action_write() callbacks have been
assuming Signal0 is requested without checking. This results in requests
for Signal1 returning data for Signal0. This patch fixes these
oversights by properly checking for the Signal's id in the respective
callbacks and handling accordingly based on the particular Signal
requested. The trig_inverted member of the mchp_tc_data is removed as
superfluous.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Cc: [email protected]
Cc: Kamel Bouhara <[email protected]>
Signed-off-by: William Breathitt Gray <[email protected]>
---
Changes in v2:
- Simplified action_read() changes to just handle qdec_mode and
non-TIOA Signals before continuing with existing code
drivers/counter/microchip-tcb-capture.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
index f9dee15d9777..e2d1dc6ca668 100644
--- a/drivers/counter/microchip-tcb-capture.c
+++ b/drivers/counter/microchip-tcb-capture.c
@@ -28,7 +28,6 @@ struct mchp_tc_data {
int qdec_mode;
int num_channels;
int channel[2];
- bool trig_inverted;
};
static const enum counter_function mchp_tc_count_functions[] = {
@@ -153,7 +152,7 @@ static int mchp_tc_count_signal_read(struct counter_device *counter,
regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], SR), &sr);
- if (priv->trig_inverted)
+ if (signal->id == 1)
sigstatus = (sr & ATMEL_TC_MTIOB);
else
sigstatus = (sr & ATMEL_TC_MTIOA);
@@ -171,6 +170,17 @@ static int mchp_tc_count_action_read(struct counter_device *counter,
struct mchp_tc_data *const priv = counter_priv(counter);
u32 cmr;
+ if (priv->qdec_mode) {
+ *action = COUNTER_SYNAPSE_ACTION_BOTH_EDGES;
+ return 0;
+ }
+
+ /* Only TIOA signal is evaluated in non-QDEC mode */
+ if (synapse->signal->id != 0) {
+ *action = COUNTER_SYNAPSE_ACTION_NONE;
+ return 0;
+ }
+
regmap_read(priv->regmap, ATMEL_TC_REG(priv->channel[0], CMR), &cmr);
switch (cmr & ATMEL_TC_ETRGEDG) {
@@ -199,8 +209,8 @@ static int mchp_tc_count_action_write(struct counter_device *counter,
struct mchp_tc_data *const priv = counter_priv(counter);
u32 edge = ATMEL_TC_ETRGEDG_NONE;
- /* QDEC mode is rising edge only */
- if (priv->qdec_mode)
+ /* QDEC mode is rising edge only; only TIOA handled in non-QDEC mode */
+ if (priv->qdec_mode || synapse->signal->id != 0)
return -EINVAL;
switch (action) {
--
2.37.3
On Tue, Oct 18, 2022 at 08:10:14AM -0400, William Breathitt Gray wrote:
> The signal_read(), action_read(), and action_write() callbacks have been
> assuming Signal0 is requested without checking. This results in requests
> for Signal1 returning data for Signal0. This patch fixes these
> oversights by properly checking for the Signal's id in the respective
> callbacks and handling accordingly based on the particular Signal
> requested. The trig_inverted member of the mchp_tc_data is removed as
> superfluous.
>
> Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
> Cc: [email protected]
> Cc: Kamel Bouhara <[email protected]>
> Signed-off-by: William Breathitt Gray <[email protected]>
> ---
> Changes in v2:
> - Simplified action_read() changes to just handle qdec_mode and
> non-TIOA Signals before continuing with existing code
Queued for counter-fixes.
William Breathitt Gray