It was reported non working mmc with this option enabled.
Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't
be run at 1.8v.
Disable it to restore correct functionality of this SoC feature.
Tested-by: Hendrik Koerner <[email protected]>
Signed-off-by: Christian Marangi <[email protected]>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 90c08b51680a..01ff24560ee6 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -756,7 +756,6 @@ sdcc1: mmc@12400000 {
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
- mmc-ddr-1_8v;
vmmc-supply = <&vsdcc_fixed>;
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
dma-names = "tx", "rx";
--
2.37.2
On Tue, Oct 25, 2022 at 01:38:17AM +0200, Christian Marangi wrote:
> It was reported non working mmc with this option enabled.
> Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't
> be run at 1.8v.
> Disable it to restore correct functionality of this SoC feature.
>
> Tested-by: Hendrik Koerner <[email protected]>
> Signed-off-by: Christian Marangi <[email protected]>
Perhaps there's some board where this property makes sense, but it seems
like something that should be added when needed in the leaf DTS, and not
supplied in the base DTSI. So:
Reviewed-by: Brian Norris <[email protected]>
This also fixes problems I've seen on my systems, so:
Tested-by: Brian Norris <[email protected]>
Thanks!
On Tue, 25 Oct 2022 01:38:17 +0200, Christian Marangi wrote:
> It was reported non working mmc with this option enabled.
> Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't
> be run at 1.8v.
> Disable it to restore correct functionality of this SoC feature.
>
>
Applied, thanks!
[1/1] ARM: dts: qcom: ipq8064: disable mmc-ddr-1_8v for sdcc1
commit: c9713e4ede1e5d044b64fe4d3cbb84223625637f
Best regards,
--
Bjorn Andersson <[email protected]>