Add usb product id of the Quectel EC200S-CN module.
usb-devices output for 0x6002:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6002 Rev=03.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0000
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
Signed-off-by: Yu-Tung Chang <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6cfb5d33609f..f65a2e7699bf 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -251,6 +251,7 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
+#define QUECTEL_PRODUCT_EC200S_CN 0x6002
#define QUECTEL_PRODUCT_EC200T 0x6026
#define CMOTECH_VENDOR_ID 0x16d8
@@ -1128,6 +1129,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
.driver_info = ZLP },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
--
2.33.0
On Thu, Oct 07, 2021 at 09:47:28AM +0200, Johan Hovold wrote:
> On Thu, Sep 30, 2021 at 10:11:12AM +0800, Yu-Tung Chang wrote:
> > Add usb product id of the Quectel EC200S-CN module.
> >
> > usb-devices output for 0x6002:
> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> > P: Vendor=2c7c ProdID=6002 Rev=03.18
> > S: Manufacturer=Android
> > S: Product=Android
> > S: SerialNumber=0000
> > C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
> > I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
> > I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> > I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
>
> Looks good now, but for completeness, could you also mention here what
> the three ports are used for (and which is which)?
I've applied the patch now, so no need to resend, but please list the
three ports in a reply if you have that information.
Johan
On Thu, Sep 30, 2021 at 10:11:12AM +0800, Yu-Tung Chang wrote:
> Add usb product id of the Quectel EC200S-CN module.
>
> usb-devices output for 0x6002:
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=2c7c ProdID=6002 Rev=03.18
> S: Manufacturer=Android
> S: Product=Android
> S: SerialNumber=0000
> C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
> I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
Looks good now, but for completeness, could you also mention here what
the three ports are used for (and which is which)?
Johan
[ Adding back the lists on CC so that this gets archived. ]
On Sat, Oct 09, 2021 at 01:50:40PM +0800, Yu-Tung Chang wrote:
> Yu-Tung Chang <[email protected]> 于2021年10月9日周六 下午1:39写道：
> >
> > Johan Hovold <[email protected]> 于2021年10月7日周四 下午3:57写道：
> > >
> > > On Thu, Oct 07, 2021 at 09:47:28AM +0200, Johan Hovold wrote:
> > > > On Thu, Sep 30, 2021 at 10:11:12AM +0800, Yu-Tung Chang wrote:
> > > > > Add usb product id of the Quectel EC200S-CN module.
> > > > >
> > > > > usb-devices output for 0x6002:
> > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> > > > > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> > > > > P: Vendor=2c7c ProdID=6002 Rev=03.18
> > > > > S: Manufacturer=Android
> > > > > S: Product=Android
> > > > > S: SerialNumber=0000
> > > > > C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
> > > > > I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
> > > > > I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> > > > > I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > > > > I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > > > > I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > > >
> > > > Looks good now, but for completeness, could you also mention here what
> > > > the three ports are used for (and which is which)?
> > >
> > > I've applied the patch now, so no need to resend, but please list the
> > > three ports in a reply if you have that information.
> >
> > ttyUSB0 used for debugging, ttyUSB1 used for AT commands,
> > ttyUSB2 used for PPP dialing.
> and lsusb.py -i -e output info:
> 1-1 2c7c:6002 ef 5IFs [USB 2.00, 480 Mbps, 500mA]
> (Android Android 0000)
> (EP) 00: Control attr 00 len 07 max 040
> 1-1:1.0 (IF) 02:06:00 1EP (Communications) cdc_ether net/usb0
> (EP) 87: Interrupt (4096ms) attr 03 len 07 max 040
> 1-1:1.1 (IF) 0a:00:00 2EPs (CDC Data) cdc_ether
> (EP) 83: Bulk attr 02 len 07 max 200
> (EP) 0c: Bulk attr 02 len 07 max 200
> 1-1:1.2 (IF) ff:00:00 2EPs (Vendor Specific Class) option ttyUSB0
> (EP) 0b: Bulk attr 02 len 07 max 200
> (EP) 82: Bulk attr 02 len 07 max 200
> 1-1:1.3 (IF) ff:00:00 3EPs (Vendor Specific Class) option ttyUSB1
> (EP) 89: Interrupt (4096ms) attr 03 len 07 max 040
> (EP) 86: Bulk attr 02 len 07 max 200
> (EP) 0f: Bulk attr 02 len 07 max 200
> 1-1:1.4 (IF) ff:00:00 3EPs (Vendor Specific Class) option ttyUSB2
> (EP) 81: Bulk attr 02 len 07 max 200
> (EP) 0a: Bulk attr 02 len 07 max 200
> (EP) 88: Interrupt (4096ms) attr 03 len 07 max 040
Perfect, thanks for the details.
Johan