Fix warnings on Allwinner D1 platform:
[ 1.604695] ------------[ cut here ]------------
[ 1.609328] bus-emac already disabled
[ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
[ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
[ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
[ 1.632443] Workqueue: events_unbound deferred_probe_work_func
[ 1.638286] epc : clk_core_disable+0xcc/0xec
[ 1.642561] ra : clk_core_disable+0xcc/0xec
[ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
[ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
[ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
[ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
[ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
[ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
[ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
[ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
[ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
[ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
[ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
[ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
[ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
[ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160
[ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[ 1.868956] ---[ end trace 8d5c6046255f84a0 ]---
[ 1.873675] ------------[ cut here ]------------
[ 1.878366] bus-emac already unprepared
[ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
[ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
[ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
[ 1.903464] Workqueue: events_unbound deferred_probe_work_func
[ 1.909305] epc : clk_core_unprepare+0xe4/0x168
[ 1.913840] ra : clk_core_unprepare+0xe4/0x168
[ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
[ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
[ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
[ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
[ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
[ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
[ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
[ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
[ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
[ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
[ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002
[ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
[ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
[ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
[ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
[ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
[ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
[ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
[ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
[ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
[ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
[ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
[ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
[ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
[ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
[ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
[ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
[ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
[ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
[ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
[ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
[ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160
[ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
[ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
[ 2.135455] ---[ end trace 8d5c6046255f84a1 ]---
the dwmmac-sun8i driver will get the "stmmaceth" clk as tx_clk during
driver initialization. If stmmac_dvr_probe() fails due to various
reasons, sun8i_dwmac_exit() will disable and unprepare the "stmmaceth"
clk, then stmmac_remove_config_dt() will disable and unprepare the
clk again.
Currently, there's no other usage of tx_clk except preparing and
enabling, we can fix the above warnings by simply removing the tx_clk
and all its usage, we rely on the common stmmac_probe_config_dt()
routine to prepare and enable the stmmaceth clk.
Signed-off-by: Jisheng Zhang <[email protected]>
---
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 20 +------------------
1 file changed, 1 insertion(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 617d0e4c6495..d97469825e53 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -57,7 +57,6 @@ struct emac_variant {
};
/* struct sunxi_priv_data - hold all sunxi private data
- * @tx_clk: reference to MAC TX clock
* @ephy_clk: reference to the optional EPHY clock for the internal PHY
* @regulator: reference to the optional regulator
* @rst_ephy: reference to the optional EPHY reset for the internal PHY
@@ -68,7 +67,6 @@ struct emac_variant {
* @mux_handle: Internal pointer used by mdio-mux lib
*/
struct sunxi_priv_data {
- struct clk *tx_clk;
struct clk *ephy_clk;
struct regulator *regulator;
struct reset_control *rst_ephy;
@@ -579,22 +577,14 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
}
}
- ret = clk_prepare_enable(gmac->tx_clk);
- if (ret) {
- dev_err(&pdev->dev, "Could not enable AHB clock\n");
- goto err_disable_regulator;
- }
-
if (gmac->use_internal_phy) {
ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
if (ret)
- goto err_disable_clk;
+ goto err_disable_regulator;
}
return 0;
-err_disable_clk:
- clk_disable_unprepare(gmac->tx_clk);
err_disable_regulator:
if (gmac->regulator)
regulator_disable(gmac->regulator);
@@ -1043,8 +1033,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
if (gmac->variant->soc_has_internal_phy)
sun8i_dwmac_unpower_internal_phy(gmac);
- clk_disable_unprepare(gmac->tx_clk);
-
if (gmac->regulator)
regulator_disable(gmac->regulator);
}
@@ -1167,12 +1155,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
return -EINVAL;
}
- gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
- if (IS_ERR(gmac->tx_clk)) {
- dev_err(dev, "Could not get TX clock\n");
- return PTR_ERR(gmac->tx_clk);
- }
-
/* Optional regulator for PHY */
gmac->regulator = devm_regulator_get_optional(dev, "phy");
if (IS_ERR(gmac->regulator)) {
--
2.34.1
On 1/23/22 7:28 AM, Jisheng Zhang wrote:
> Fix warnings on Allwinner D1 platform:
>
> [ 1.604695] ------------[ cut here ]------------
> [ 1.609328] bus-emac already disabled
> [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
> [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
> [ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
> [ 1.632443] Workqueue: events_unbound deferred_probe_work_func
> [ 1.638286] epc : clk_core_disable+0xcc/0xec
> [ 1.642561] ra : clk_core_disable+0xcc/0xec
> [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
> [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
> [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
> [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
> [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
> [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
> [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
> [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
> [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
> [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
> [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
> [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
> [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
> [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160
> [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]---
> [ 1.873675] ------------[ cut here ]------------
> [ 1.878366] bus-emac already unprepared
> [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
> [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
> [ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
> [ 1.903464] Workqueue: events_unbound deferred_probe_work_func
> [ 1.909305] epc : clk_core_unprepare+0xe4/0x168
> [ 1.913840] ra : clk_core_unprepare+0xe4/0x168
> [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
> [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
> [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
> [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
> [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
> [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
> [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
> [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
> [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002
> [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
> [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
> [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
> [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
> [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160
> [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]---
>
> the dwmmac-sun8i driver will get the "stmmaceth" clk as tx_clk during
> driver initialization. If stmmac_dvr_probe() fails due to various
> reasons, sun8i_dwmac_exit() will disable and unprepare the "stmmaceth"
> clk, then stmmac_remove_config_dt() will disable and unprepare the
> clk again.
This should still be balanced, because both stmmac_probe_config_dt and
sun8i_dwmac_init prepare/enable the clock, so the dwmac-sun8i glue layer calls
stmmac_dvr_probe with the clock having an enable count of 2. It looks like the
underlying issue is that commit 5ec55823438e ("net: stmmac: add clocks
management for gmac driver") introduces unbalanced runtime PM.
- stmmac_dvr_probe calls pm_runtime_get_noresume and pm_runtime_set_active,
since it assumes the clocks are already enabled. This is fine.
- If stmmac_dvr_probe fails, it calls stmmac_bus_clks_config(priv, false),
which drops the enable count down to 1. This is a bug, not just in this case,
but also because it will unbalance the clocks if runtime PM is disabled.
- If stmmac_dvr_probe fails, it never calls pm_runtime_disable if the failure
occurs after the call to pm_runtime_enable. This is also a bug.
It looks like at some point stmmac_dvr_remove was expected to leave all of the
clocks disabled, but it must leave them enabled as of commit 8f269102baf7 ("net:
stmmac: disable clocks in stmmac_remove_config_dt()"), since
stmmac_remove_config_dt is called after stmmac_dvr_remove in stmmac_pltfr_remove.
- If stmmac_dvr_probe succeeds, it calls pm_runtime_put. This allows runtime PM
to suspend the device, dropping the clock enable count to 1. This is fine.
- But then stmmac_dvr_remove calls pm_runtime_put as well. It needs to do the
opposite. It must ensure the device is runtime resumed, so the clock enable
count matches what it was before stmmac_dvr_probe was called (in this case: 2).
> Currently, there's no other usage of tx_clk except preparing and
> enabling, we can fix the above warnings by simply removing the tx_clk
> and all its usage, we rely on the common stmmac_probe_config_dt()
> routine to prepare and enable the stmmaceth clk.
This is a good change to make, as indeed this code is now unnecessary, and
removing it will allow runtime PM to actually disable the clock. But I am not
sure how this resolves the warnings you are seeing, as the sun8i_dwmac_init/exit
calls should have been balanced already.
Can you check if the PHY regulator is also getting unbalanced? Unbalanced calls
to sun8i_dwmac_exit would also underflow the regulator use count, which should
trigger its own warning.
Regards,
Samuel
> Signed-off-by: Jisheng Zhang <[email protected]>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 20 +------------------
> 1 file changed, 1 insertion(+), 19 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> index 617d0e4c6495..d97469825e53 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> @@ -57,7 +57,6 @@ struct emac_variant {
> };
>
> /* struct sunxi_priv_data - hold all sunxi private data
> - * @tx_clk: reference to MAC TX clock
> * @ephy_clk: reference to the optional EPHY clock for the internal PHY
> * @regulator: reference to the optional regulator
> * @rst_ephy: reference to the optional EPHY reset for the internal PHY
> @@ -68,7 +67,6 @@ struct emac_variant {
> * @mux_handle: Internal pointer used by mdio-mux lib
> */
> struct sunxi_priv_data {
> - struct clk *tx_clk;
> struct clk *ephy_clk;
> struct regulator *regulator;
> struct reset_control *rst_ephy;
> @@ -579,22 +577,14 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
> }
> }
>
> - ret = clk_prepare_enable(gmac->tx_clk);
> - if (ret) {
> - dev_err(&pdev->dev, "Could not enable AHB clock\n");
> - goto err_disable_regulator;
> - }
> -
> if (gmac->use_internal_phy) {
> ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
> if (ret)
> - goto err_disable_clk;
> + goto err_disable_regulator;
> }
>
> return 0;
>
> -err_disable_clk:
> - clk_disable_unprepare(gmac->tx_clk);
> err_disable_regulator:
> if (gmac->regulator)
> regulator_disable(gmac->regulator);
> @@ -1043,8 +1033,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
> if (gmac->variant->soc_has_internal_phy)
> sun8i_dwmac_unpower_internal_phy(gmac);
>
> - clk_disable_unprepare(gmac->tx_clk);
> -
> if (gmac->regulator)
> regulator_disable(gmac->regulator);
> }
> @@ -1167,12 +1155,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
> - if (IS_ERR(gmac->tx_clk)) {
> - dev_err(dev, "Could not get TX clock\n");
> - return PTR_ERR(gmac->tx_clk);
> - }
> -
> /* Optional regulator for PHY */
> gmac->regulator = devm_regulator_get_optional(dev, "phy");
> if (IS_ERR(gmac->regulator)) {
>
On Sun, 23 Jan 2022 21:28:05 +0800 Jisheng Zhang wrote:
> Fix warnings on Allwinner D1 platform:
>
> [ 1.604695] ------------[ cut here ]------------
> [ 1.609328] bus-emac already disabled
Reading Samuel's feedback it sounds like the change will have to be
reposted with a different commit message (either explaining why the
fixes indeed works or as a clean up not a fix).
Marking Changes Requested in patchwork.
On Sun, Jan 23, 2022 at 01:43:37PM -0600, Samuel Holland wrote:
> On 1/23/22 7:28 AM, Jisheng Zhang wrote:
> > Fix warnings on Allwinner D1 platform:
> >
> > [ 1.604695] ------------[ cut here ]------------
> > [ 1.609328] bus-emac already disabled
> > [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
> > [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
> > [ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
> > [ 1.632443] Workqueue: events_unbound deferred_probe_work_func
> > [ 1.638286] epc : clk_core_disable+0xcc/0xec
> > [ 1.642561] ra : clk_core_disable+0xcc/0xec
> > [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
> > [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
> > [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
> > [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
> > [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
> > [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
> > [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
> > [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> > [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> > [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
> > [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
> > [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
> > [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
> > [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
> > [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
> > [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> > [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> > [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> > [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> > [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> > [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> > [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> > [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> > [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> > [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> > [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> > [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> > [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> > [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> > [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160
> > [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> > [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> > [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]---
> > [ 1.873675] ------------[ cut here ]------------
> > [ 1.878366] bus-emac already unprepared
> > [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
> > [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
> > [ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
> > [ 1.903464] Workqueue: events_unbound deferred_probe_work_func
> > [ 1.909305] epc : clk_core_unprepare+0xe4/0x168
> > [ 1.913840] ra : clk_core_unprepare+0xe4/0x168
> > [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
> > [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
> > [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
> > [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
> > [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
> > [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
> > [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
> > [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> > [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> > [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
> > [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002
> > [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
> > [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
> > [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
> > [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
> > [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> > [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> > [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> > [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> > [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> > [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> > [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> > [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> > [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> > [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> > [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> > [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> > [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> > [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> > [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160
> > [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> > [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> > [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]---
> >
> > the dwmmac-sun8i driver will get the "stmmaceth" clk as tx_clk during
> > driver initialization. If stmmac_dvr_probe() fails due to various
> > reasons, sun8i_dwmac_exit() will disable and unprepare the "stmmaceth"
> > clk, then stmmac_remove_config_dt() will disable and unprepare the
> > clk again.
>
> This should still be balanced, because both stmmac_probe_config_dt and
> sun8i_dwmac_init prepare/enable the clock, so the dwmac-sun8i glue layer calls
> stmmac_dvr_probe with the clock having an enable count of 2. It looks like the
> underlying issue is that commit 5ec55823438e ("net: stmmac: add clocks
> management for gmac driver") introduces unbalanced runtime PM.
I added some printk then retested, the problem is triggered as below:
stmmac_probe_config_dt() enable the clk
sun8i_dwmac_init() enble the clk again
stmmac_dvr_probe() succeed, but it calls pm_runtime_put(), so rpm will
disable the clk
sun8i_dwmac_reset() fails due to various reason
sun8i_dwmac_exit() disable the clk, this is fine
stmmac_remove_config_dt() disable the clk again, so ccf complains.
The key here is: whether we should let stmmac_dvr_probe() calls
pm_runtime_put() or let stmmac users to determine whether we could
let rpm go?
If we keep current behavior: stmmac users need to take care
the code after stmmac_dvr_probe, including error handling code path,
if we touch access registers, we need to call pm_runtime_get_sync()
firstly.
Since the commit 5ec55823438e has been in for a long time, I'll submit
a patch to follow this way.
Thanks
> - stmmac_dvr_probe calls pm_runtime_get_noresume and pm_runtime_set_active,
> since it assumes the clocks are already enabled. This is fine.
> - If stmmac_dvr_probe fails, it calls stmmac_bus_clks_config(priv, false),
> which drops the enable count down to 1. This is a bug, not just in this case,
> but also because it will unbalance the clocks if runtime PM is disabled.
> - If stmmac_dvr_probe fails, it never calls pm_runtime_disable if the failure
> occurs after the call to pm_runtime_enable. This is also a bug.
>
> It looks like at some point stmmac_dvr_remove was expected to leave all of the
> clocks disabled, but it must leave them enabled as of commit 8f269102baf7 ("net:
> stmmac: disable clocks in stmmac_remove_config_dt()"), since
> stmmac_remove_config_dt is called after stmmac_dvr_remove in stmmac_pltfr_remove.
> - If stmmac_dvr_probe succeeds, it calls pm_runtime_put. This allows runtime PM
> to suspend the device, dropping the clock enable count to 1. This is fine.
> - But then stmmac_dvr_remove calls pm_runtime_put as well. It needs to do the
> opposite. It must ensure the device is runtime resumed, so the clock enable
> count matches what it was before stmmac_dvr_probe was called (in this case: 2).
>
> > Currently, there's no other usage of tx_clk except preparing and
> > enabling, we can fix the above warnings by simply removing the tx_clk
> > and all its usage, we rely on the common stmmac_probe_config_dt()
> > routine to prepare and enable the stmmaceth clk.
>
> This is a good change to make, as indeed this code is now unnecessary, and
> removing it will allow runtime PM to actually disable the clock. But I am not
> sure how this resolves the warnings you are seeing, as the sun8i_dwmac_init/exit
> calls should have been balanced already.
>
> Can you check if the PHY regulator is also getting unbalanced? Unbalanced calls
> to sun8i_dwmac_exit would also underflow the regulator use count, which should
> trigger its own warning.
>
> Regards,
> Samuel
>
> > Signed-off-by: Jisheng Zhang <[email protected]>
> > ---
> > .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 20 +------------------
> > 1 file changed, 1 insertion(+), 19 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> > index 617d0e4c6495..d97469825e53 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
> > @@ -57,7 +57,6 @@ struct emac_variant {
> > };
> >
> > /* struct sunxi_priv_data - hold all sunxi private data
> > - * @tx_clk: reference to MAC TX clock
> > * @ephy_clk: reference to the optional EPHY clock for the internal PHY
> > * @regulator: reference to the optional regulator
> > * @rst_ephy: reference to the optional EPHY reset for the internal PHY
> > @@ -68,7 +67,6 @@ struct emac_variant {
> > * @mux_handle: Internal pointer used by mdio-mux lib
> > */
> > struct sunxi_priv_data {
> > - struct clk *tx_clk;
> > struct clk *ephy_clk;
> > struct regulator *regulator;
> > struct reset_control *rst_ephy;
> > @@ -579,22 +577,14 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
> > }
> > }
> >
> > - ret = clk_prepare_enable(gmac->tx_clk);
> > - if (ret) {
> > - dev_err(&pdev->dev, "Could not enable AHB clock\n");
> > - goto err_disable_regulator;
> > - }
> > -
> > if (gmac->use_internal_phy) {
> > ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
> > if (ret)
> > - goto err_disable_clk;
> > + goto err_disable_regulator;
> > }
> >
> > return 0;
> >
> > -err_disable_clk:
> > - clk_disable_unprepare(gmac->tx_clk);
> > err_disable_regulator:
> > if (gmac->regulator)
> > regulator_disable(gmac->regulator);
> > @@ -1043,8 +1033,6 @@ static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
> > if (gmac->variant->soc_has_internal_phy)
> > sun8i_dwmac_unpower_internal_phy(gmac);
> >
> > - clk_disable_unprepare(gmac->tx_clk);
> > -
> > if (gmac->regulator)
> > regulator_disable(gmac->regulator);
> > }
> > @@ -1167,12 +1155,6 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
> > return -EINVAL;
> > }
> >
> > - gmac->tx_clk = devm_clk_get(dev, "stmmaceth");
> > - if (IS_ERR(gmac->tx_clk)) {
> > - dev_err(dev, "Could not get TX clock\n");
> > - return PTR_ERR(gmac->tx_clk);
> > - }
> > -
> > /* Optional regulator for PHY */
> > gmac->regulator = devm_regulator_get_optional(dev, "phy");
> > if (IS_ERR(gmac->regulator)) {
> >
>
On Wed, Jan 26, 2022 at 11:12:28PM +0800, Jisheng Zhang wrote:
> On Sun, Jan 23, 2022 at 01:43:37PM -0600, Samuel Holland wrote:
> > On 1/23/22 7:28 AM, Jisheng Zhang wrote:
> > > Fix warnings on Allwinner D1 platform:
> > >
> > > [ 1.604695] ------------[ cut here ]------------
> > > [ 1.609328] bus-emac already disabled
> > > [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
> > > [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
> > > [ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
> > > [ 1.632443] Workqueue: events_unbound deferred_probe_work_func
> > > [ 1.638286] epc : clk_core_disable+0xcc/0xec
> > > [ 1.642561] ra : clk_core_disable+0xcc/0xec
> > > [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
> > > [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
> > > [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
> > > [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
> > > [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
> > > [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
> > > [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
> > > [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> > > [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> > > [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
> > > [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
> > > [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
> > > [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
> > > [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
> > > [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > > [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
> > > [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> > > [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > > [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> > > [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> > > [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> > > [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> > > [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> > > [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> > > [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> > > [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> > > [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> > > [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> > > [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> > > [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> > > [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> > > [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160
> > > [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> > > [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> > > [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]---
> > > [ 1.873675] ------------[ cut here ]------------
> > > [ 1.878366] bus-emac already unprepared
> > > [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
> > > [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
> > > [ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
> > > [ 1.903464] Workqueue: events_unbound deferred_probe_work_func
> > > [ 1.909305] epc : clk_core_unprepare+0xe4/0x168
> > > [ 1.913840] ra : clk_core_unprepare+0xe4/0x168
> > > [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
> > > [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
> > > [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
> > > [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
> > > [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
> > > [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
> > > [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
> > > [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> > > [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> > > [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
> > > [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002
> > > [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
> > > [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
> > > [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
> > > [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
> > > [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> > > [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > > [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> > > [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> > > [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> > > [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> > > [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> > > [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> > > [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> > > [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> > > [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> > > [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> > > [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> > > [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> > > [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> > > [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160
> > > [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> > > [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> > > [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]---
> > >
> > > the dwmmac-sun8i driver will get the "stmmaceth" clk as tx_clk during
> > > driver initialization. If stmmac_dvr_probe() fails due to various
> > > reasons, sun8i_dwmac_exit() will disable and unprepare the "stmmaceth"
> > > clk, then stmmac_remove_config_dt() will disable and unprepare the
> > > clk again.
> >
> > This should still be balanced, because both stmmac_probe_config_dt and
> > sun8i_dwmac_init prepare/enable the clock, so the dwmac-sun8i glue layer calls
> > stmmac_dvr_probe with the clock having an enable count of 2. It looks like the
> > underlying issue is that commit 5ec55823438e ("net: stmmac: add clocks
> > management for gmac driver") introduces unbalanced runtime PM.
>
> I added some printk then retested, the problem is triggered as below:
>
> stmmac_probe_config_dt() enable the clk
> sun8i_dwmac_init() enble the clk again
> stmmac_dvr_probe() succeed, but it calls pm_runtime_put(), so rpm will
> disable the clk
> sun8i_dwmac_reset() fails due to various reason
> sun8i_dwmac_exit() disable the clk, this is fine
> stmmac_remove_config_dt() disable the clk again, so ccf complains.
>
> The key here is: whether we should let stmmac_dvr_probe() calls
> pm_runtime_put() or let stmmac users to determine whether we could
> let rpm go?
> If we keep current behavior: stmmac users need to take care
> the code after stmmac_dvr_probe, including error handling code path,
> if we touch access registers, we need to call pm_runtime_get_sync()
> firstly.
>
> Since the commit 5ec55823438e has been in for a long time, I'll submit
> a patch to follow this way.
>
After reading the code and commit history, I found some users suffering
from the runtimepm issues, for example, dwmac-rk.c, so I changed my
idea. I think it's better to let stmmac users to call pm_runtime_put():
First of all, only the users know whether it's safe to finally
keep the mac runtime suspended after probe.
Secondly, if the users need to do platform specific operations after
stmmac_dvr_probe(), especially needs to access some registers, we have
to resume the mac firstly. The error handling code path also needs to
take care of it. It looks a bit strange resume immediately resume the
mac after suspending it.
Any suggestion is welcome.
PS: Since this would partially revert commit 5ec55823438e, I add Joakim
into the email thread.
Thanks
On Thu, Jan 27, 2022 at 12:00:42AM +0800, Jisheng Zhang wrote:
> On Wed, Jan 26, 2022 at 11:12:28PM +0800, Jisheng Zhang wrote:
> > On Sun, Jan 23, 2022 at 01:43:37PM -0600, Samuel Holland wrote:
> > > On 1/23/22 7:28 AM, Jisheng Zhang wrote:
> > > > Fix warnings on Allwinner D1 platform:
> > > >
> > > > [ 1.604695] ------------[ cut here ]------------
> > > > [ 1.609328] bus-emac already disabled
> > > > [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
> > > > [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1
> > > > [ 1.627653] Hardware name: Allwinner D1 NeZha (DT)
> > > > [ 1.632443] Workqueue: events_unbound deferred_probe_work_func
> > > > [ 1.638286] epc : clk_core_disable+0xcc/0xec
> > > > [ 1.642561] ra : clk_core_disable+0xcc/0xec
> > > > [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10
> > > > [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
> > > > [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
> > > > [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
> > > > [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
> > > > [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
> > > > [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80
> > > > [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> > > > [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> > > > [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff
> > > > [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0
> > > > [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
> > > > [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec
> > > > [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78
> > > > [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > > > [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c
> > > > [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> > > > [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > > > [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> > > > [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> > > > [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> > > > [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> > > > [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> > > > [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> > > > [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> > > > [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> > > > [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> > > > [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> > > > [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> > > > [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> > > > [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > > [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > > [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> > > > [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160
> > > > [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> > > > [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> > > > [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]---
> > > > [ 1.873675] ------------[ cut here ]------------
> > > > [ 1.878366] bus-emac already unprepared
> > > > [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
> > > > [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
> > > > [ 1.898674] Hardware name: Allwinner D1 NeZha (DT)
> > > > [ 1.903464] Workqueue: events_unbound deferred_probe_work_func
> > > > [ 1.909305] epc : clk_core_unprepare+0xe4/0x168
> > > > [ 1.913840] ra : clk_core_unprepare+0xe4/0x168
> > > > [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10
> > > > [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
> > > > [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
> > > > [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
> > > > [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
> > > > [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001
> > > > [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80
> > > > [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff
> > > > [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000
> > > > [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001
> > > > [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002
> > > > [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
> > > > [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168
> > > > [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c
> > > > [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c
> > > > [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c
> > > > [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8
> > > > [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0
> > > > [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c
> > > > [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148
> > > > [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138
> > > > [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170
> > > > [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0
> > > > [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4
> > > > [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184
> > > > [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc
> > > > [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4
> > > > [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390
> > > > [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8
> > > > [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > > [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188
> > > > [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390
> > > > [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160
> > > > [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60
> > > > [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc
> > > > [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]---
> > > >
> > > > the dwmmac-sun8i driver will get the "stmmaceth" clk as tx_clk during
> > > > driver initialization. If stmmac_dvr_probe() fails due to various
> > > > reasons, sun8i_dwmac_exit() will disable and unprepare the "stmmaceth"
> > > > clk, then stmmac_remove_config_dt() will disable and unprepare the
> > > > clk again.
> > >
> > > This should still be balanced, because both stmmac_probe_config_dt and
> > > sun8i_dwmac_init prepare/enable the clock, so the dwmac-sun8i glue layer calls
> > > stmmac_dvr_probe with the clock having an enable count of 2. It looks like the
> > > underlying issue is that commit 5ec55823438e ("net: stmmac: add clocks
> > > management for gmac driver") introduces unbalanced runtime PM.
> >
> > I added some printk then retested, the problem is triggered as below:
> >
> > stmmac_probe_config_dt() enable the clk
> > sun8i_dwmac_init() enble the clk again
> > stmmac_dvr_probe() succeed, but it calls pm_runtime_put(), so rpm will
> > disable the clk
> > sun8i_dwmac_reset() fails due to various reason
> > sun8i_dwmac_exit() disable the clk, this is fine
> > stmmac_remove_config_dt() disable the clk again, so ccf complains.
> >
> > The key here is: whether we should let stmmac_dvr_probe() calls
> > pm_runtime_put() or let stmmac users to determine whether we could
> > let rpm go?
> > If we keep current behavior: stmmac users need to take care
> > the code after stmmac_dvr_probe, including error handling code path,
> > if we touch access registers, we need to call pm_runtime_get_sync()
> > firstly.
> >
> > Since the commit 5ec55823438e has been in for a long time, I'll submit
> > a patch to follow this way.
> >
>
> After reading the code and commit history, I found some users suffering
> from the runtimepm issues, for example, dwmac-rk.c, so I changed my
> idea. I think it's better to let stmmac users to call pm_runtime_put():
>
> First of all, only the users know whether it's safe to finally
> keep the mac runtime suspended after probe.
>
> Secondly, if the users need to do platform specific operations after
> stmmac_dvr_probe(), especially needs to access some registers, we have
> to resume the mac firstly. The error handling code path also needs to
> take care of it. It looks a bit strange resume immediately resume the
> mac after suspending it.
>
> Any suggestion is welcome.
>
> PS: Since this would partially revert commit 5ec55823438e, I add Joakim
> into the email thread.
>
If we keep current behavior as is, and let stmmac users to take care
necessary runtime resume before specific handling, we need similar
patch as dwmac-sun8i below for all stmmac users, especially the error
handling path:
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 09644ab0d87a..ef2acea3d036 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -16,6 +16,7 @@
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
#include <linux/stmmac.h>
@@ -1254,6 +1255,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
ndev = dev_get_drvdata(&pdev->dev);
priv = netdev_priv(ndev);
+ pm_runtime_get_sync(&pdev->dev);
/* The mux must be registered after parent MDIO
* so after stmmac_dvr_probe()
*/
@@ -1272,12 +1274,15 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
goto dwmac_remove;
}
+ pm_runtime_put(&pdev->dev);
+
return 0;
dwmac_mux:
reset_control_put(gmac->rst_ephy);
clk_put(gmac->ephy_clk);
dwmac_remove:
+ pm_runtime_put_noidle(&pdev->dev);
stmmac_dvr_remove(&pdev->dev);
dwmac_exit:
sun8i_dwmac_exit(pdev, gmac);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8ded4be08b00..2f9bd1eacb81 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7133,6 +7133,10 @@ int stmmac_dvr_remove(struct device *dev)
netdev_info(priv->dev, "%s: removing driver", __func__);
+ pm_runtime_get_sync(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
+
stmmac_stop_all_dma(priv);
stmmac_mac_set(priv, priv->ioaddr, false);
netif_carrier_off(ndev);
@@ -7151,8 +7155,6 @@ int stmmac_dvr_remove(struct device *dev)
if (priv->plat->stmmac_rst)
reset_control_assert(priv->plat->stmmac_rst);
reset_control_assert(priv->plat->stmmac_ahb_rst);
- pm_runtime_put(dev);
- pm_runtime_disable(dev);
if (priv->hw->pcs != STMMAC_PCS_TBI &&
priv->hw->pcs != STMMAC_PCS_RTBI)
stmmac_mdio_unregister(ndev);