2023-04-11 11:02:03

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 0/9] Tegra234 Memory interconnect support

Hi All,

Thank you for the review. Have incorporated the changes suggested in
v5. Requesting for ACK on the remaining patches and please consider
for merging.

The patches are divided into below groups:

- Patch [7-8]: Memory Interconnect support in PCI (MC client)
-- Need ACK.

- Patch [3-6, 9]: Memory Interconnect support in CPUFREQ (MC client)
-- 'Patch 3, 4 & 5': have ACK from Krzysztof.
-- 'Patch 6 & 9': Need ACK.

- Patch [1-2]: Memory Interconnect base support
-- 'Patch 2': has ACK from Krzysztof.
-- 'Patch 1': Need ACK.

Both the MC client patches are dependent on the 'Patch [1-2]'.

Thank you,
Sumit Gupta
============

This patch series adds memory interconnect support for Tegra234 SoC.
It is used to dynamically scale DRAM Frequency as per the bandwidth
requests from different Memory Controller (MC) clients.
MC Clients use ICC Framework's icc_set_bw() api to dynamically request
for the DRAM bandwidth (BW). As per path, the request will be routed
from MC to the EMC driver. MC driver passes the request info like the
Client ID, type, and frequency request info to the BPMP-FW which will
set the final DRAM freq considering all exisiting requests.

MC and EMC are the ICC providers. Nodes in path for a request will be:
Client[1-n] -> MC -> EMC -> EMEM/DRAM

The patch series also adds interconnect support in below clients:
1) CPUFREQ driver for scaling bandwidth with CPU frequency. For that,
add per cluster OPP table which will be used in the CPUFREQ driver
by requesting the minimum BW respective to the given CPU frequency
in the OPP table of it's cluster.
2) PCIE driver to request BW required for different modes.

---
v5[5] -> v6:
- split PCI patch into two 'patch 7 & 8' as suggested by 'Lorenzo'.
- added more info into the commit description of PCI patches.

v4[4] -> v5:
- dropped 'patch 1 & 2' from v4 which added "nvidia,bpmp" in MC node.
- save BPMP ref from EMC node into 'mc->bpmp' and use it in MC driver.
- added check for array bounds violation in pci suggested by Bjorn.
- moved DT patch having OPP table to the last 'Patch 8'.
- did multiple small changes and cleanup suggested by Krzysztof in v4.

v3[3] -> v4:
- dropped 'patch 1' from v3 which returns 'struct tegra_bpmp *'.
- added 'patch 1 & 2' to get bpmp ref using 'nvidia,bpmp' property.
- dropped 'patch 10 & 11' from v3 and added those changes in 'patch 3'.
- added static to prototype of 'tegra_cpufreq_init_cpufreq_table()' to
fix the warning reported by 'kernel test robot'.

v2[2] -> v3:
- in 'patch 7', set 'icc_dram_bw_scaling' to false if set_opp call failed
to avoid flooding of uart with 'Failed to set bw' messages.
- added 'patch 10' to handle if the bpmp-fw is old and not support bwmgr mrq.
- added 'patch 11' to fix interconnect registration in tegra186-emc.
ref patch link in linux next:
[https://lore.kernel.org/all/[email protected]/]

v1[1] -> v2:
- moved BW setting to tegra234_mc_icc_set() from EMC driver.
- moved sw clients to the 'tegra_mc_clients' table.
- point 'node->data' to the entry within 'tegra_mc_clients'.
- removed 'struct tegra_icc_node' and get client info using 'node->data'.
- changed error handling in and around tegra_emc_interconnect_init().
- moved 'tegra-icc.h' from 'include/soc/tegra' to 'include/linux'.
- added interconnect support to PCIE driver in 'Patch 9'.
- merged 'Patch 9 & 10' from [1] to get num_channels and use.
- merged 'Patch 2 & 3' from [1] to add ISO and NISO clients.
- added 'Acked-by' of Krzysztof from 'Patch 05/10' of [1].
- Removed 'Patch 7' from [1] as that is merged now.

Sumit Gupta (9):
memory: tegra: add interconnect support for DRAM scaling in Tegra234
memory: tegra: add mc clients for Tegra234
memory: tegra: add software mc clients in Tegra234
dt-bindings: tegra: add icc ids for dummy MC clients
memory: tegra: make cpu cluster bw request a multiple of mc channels
cpufreq: tegra194: add OPP support and set bandwidth
PCI: tegra194: Fix possible array out of bounds access
PCI: tegra194: Add interconnect support in Tegra234
arm64: tegra: Add cpu OPP tables and interconnects property

arch/arm64/boot/dts/nvidia/tegra234.dtsi | 276 ++++++++++
drivers/cpufreq/tegra194-cpufreq.c | 156 +++++-
drivers/memory/tegra/mc.c | 24 +
drivers/memory/tegra/mc.h | 1 +
drivers/memory/tegra/tegra186-emc.c | 130 +++++
drivers/memory/tegra/tegra234.c | 595 ++++++++++++++++++++-
drivers/pci/controller/dwc/pcie-tegra194.c | 44 +-
include/dt-bindings/memory/tegra234-mc.h | 5 +
include/linux/tegra-icc.h | 65 +++
include/soc/tegra/mc.h | 8 +
10 files changed, 1282 insertions(+), 22 deletions(-)
create mode 100644 include/linux/tegra-icc.h

[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/[email protected]/
[4] https://lore.kernel.org/lkml/[email protected]/
[5] https://lore.kernel.org/lkml/[email protected]/

--
2.17.1


2023-04-11 11:02:08

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 1/9] memory: tegra: add interconnect support for DRAM scaling in Tegra234

Add Interconnect framework support to dynamically set the DRAM
bandwidth from different clients. Both the MC and EMC drivers are
added as ICC providers. The path for any request is:
MC-Client[1-n] -> MC -> EMC -> EMEM/DRAM

MC client's request for bandwidth will go to the MC driver which
passes the client request info like BPMP Client ID, Client type
and the Bandwidth to the BPMP-FW. The final DRAM freq to achieve
the requested bandwidth is set by the BPMP-FW based on the passed
parameters.

Signed-off-by: Sumit Gupta <[email protected]>
---
drivers/memory/tegra/mc.c | 5 +
drivers/memory/tegra/tegra186-emc.c | 130 ++++++++++++++++++++++++++
drivers/memory/tegra/tegra234.c | 138 +++++++++++++++++++++++++++-
include/linux/tegra-icc.h | 65 +++++++++++++
include/soc/tegra/mc.h | 7 ++
5 files changed, 344 insertions(+), 1 deletion(-)
create mode 100644 include/linux/tegra-icc.h

diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c
index 9082b6c3763d..983455b1f98d 100644
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sort.h>
+#include <linux/tegra-icc.h>

#include <soc/tegra/fuse.h>

@@ -792,6 +793,8 @@ static int tegra_mc_interconnect_setup(struct tegra_mc *mc)
mc->provider.data = &mc->provider;
mc->provider.set = mc->soc->icc_ops->set;
mc->provider.aggregate = mc->soc->icc_ops->aggregate;
+ mc->provider.get_bw = mc->soc->icc_ops->get_bw;
+ mc->provider.xlate = mc->soc->icc_ops->xlate;
mc->provider.xlate_extended = mc->soc->icc_ops->xlate_extended;

icc_provider_init(&mc->provider);
@@ -824,6 +827,8 @@ static int tegra_mc_interconnect_setup(struct tegra_mc *mc)
err = icc_link_create(node, TEGRA_ICC_MC);
if (err)
goto remove_nodes;
+
+ node->data = (struct tegra_mc_client *)&(mc->soc->clients[i]);
}

err = icc_provider_register(&mc->provider);
diff --git a/drivers/memory/tegra/tegra186-emc.c b/drivers/memory/tegra/tegra186-emc.c
index e935ad4e95b6..0aa6c049aa43 100644
--- a/drivers/memory/tegra/tegra186-emc.c
+++ b/drivers/memory/tegra/tegra186-emc.c
@@ -7,9 +7,11 @@
#include <linux/debugfs.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>

#include <soc/tegra/bpmp.h>
+#include "mc.h"

struct tegra186_emc_dvfs {
unsigned long latency;
@@ -29,8 +31,15 @@ struct tegra186_emc {
unsigned long min_rate;
unsigned long max_rate;
} debugfs;
+
+ struct icc_provider provider;
};

+static inline struct tegra186_emc *to_tegra186_emc(struct icc_provider *provider)
+{
+ return container_of(provider, struct tegra186_emc, provider);
+}
+
/*
* debugfs interface
*
@@ -146,8 +155,102 @@ DEFINE_DEBUGFS_ATTRIBUTE(tegra186_emc_debug_max_rate_fops,
tegra186_emc_debug_max_rate_get,
tegra186_emc_debug_max_rate_set, "%llu\n");

+/*
+ * tegra_emc_icc_set_bw() - Set BW api for EMC provider
+ * @src: ICC node for External Memory Controller (EMC)
+ * @dst: ICC node for External Memory (DRAM)
+ *
+ * Do nothing here as info to BPMP-FW is now passed in the BW set function
+ * of the MC driver. BPMP-FW sets the final Freq based on the passed values.
+ */
+static int tegra_emc_icc_set_bw(struct icc_node *src, struct icc_node *dst)
+{
+ return 0;
+}
+
+static struct icc_node *
+tegra_emc_of_icc_xlate(struct of_phandle_args *spec, void *data)
+{
+ struct icc_provider *provider = data;
+ struct icc_node *node;
+
+ /* External Memory is the only possible ICC route */
+ list_for_each_entry(node, &provider->nodes, node_list) {
+ if (node->id != TEGRA_ICC_EMEM)
+ continue;
+
+ return node;
+ }
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int tegra_emc_icc_get_init_bw(struct icc_node *node, u32 *avg, u32 *peak)
+{
+ *avg = 0;
+ *peak = 0;
+
+ return 0;
+}
+
+static int tegra_emc_interconnect_init(struct tegra186_emc *emc)
+{
+ struct tegra_mc *mc = dev_get_drvdata(emc->dev->parent);
+ const struct tegra_mc_soc *soc = mc->soc;
+ struct icc_node *node;
+ int err;
+
+ emc->provider.dev = emc->dev;
+ emc->provider.set = tegra_emc_icc_set_bw;
+ emc->provider.data = &emc->provider;
+ emc->provider.aggregate = soc->icc_ops->aggregate;
+ emc->provider.xlate = tegra_emc_of_icc_xlate;
+ emc->provider.get_bw = tegra_emc_icc_get_init_bw;
+
+ icc_provider_init(&emc->provider);
+
+ /* create External Memory Controller node */
+ node = icc_node_create(TEGRA_ICC_EMC);
+ if (IS_ERR(node)) {
+ err = PTR_ERR(node);
+ goto err_msg;
+ }
+
+ node->name = "External Memory Controller";
+ icc_node_add(node, &emc->provider);
+
+ /* link External Memory Controller to External Memory (DRAM) */
+ err = icc_link_create(node, TEGRA_ICC_EMEM);
+ if (err)
+ goto remove_nodes;
+
+ /* create External Memory node */
+ node = icc_node_create(TEGRA_ICC_EMEM);
+ if (IS_ERR(node)) {
+ err = PTR_ERR(node);
+ goto remove_nodes;
+ }
+
+ node->name = "External Memory (DRAM)";
+ icc_node_add(node, &emc->provider);
+
+ err = icc_provider_register(&emc->provider);
+ if (err)
+ goto remove_nodes;
+
+ return 0;
+
+remove_nodes:
+ icc_nodes_remove(&emc->provider);
+err_msg:
+ dev_err(emc->dev, "failed to initialize ICC: %d\n", err);
+
+ return err;
+}
+
static int tegra186_emc_probe(struct platform_device *pdev)
{
+ struct tegra_mc *mc = dev_get_drvdata(pdev->dev.parent);
struct mrq_emc_dvfs_latency_response response;
struct tegra_bpmp_message msg;
struct tegra186_emc *emc;
@@ -236,6 +339,29 @@ static int tegra186_emc_probe(struct platform_device *pdev)
debugfs_create_file("max_rate", S_IRUGO | S_IWUSR, emc->debugfs.root,
emc, &tegra186_emc_debug_max_rate_fops);

+ if (mc && mc->soc->icc_ops) {
+ /*
+ * Initialize the ICC even if BPMP-FW doesn't support 'MRQ_BWMGR_INT'.
+ * Use the flag 'mc->bwmgr_mrq_supported' within MC driver and return
+ * EINVAL instead of passing the request to BPMP-FW later when the BW
+ * request is made by client with 'icc_set_bw()' call.
+ */
+ err = tegra_emc_interconnect_init(emc);
+ if (err)
+ goto put_bpmp;
+
+ if (tegra_bpmp_mrq_is_supported(emc->bpmp, MRQ_BWMGR_INT)) {
+ mc->bwmgr_mrq_supported = true;
+
+ /*
+ * MC driver probe can't get BPMP reference as it gets probed
+ * earlier than BPMP. So, save the BPMP ref got from the EMC
+ * DT node in the mc->bpmp and use it in MC's icc_set hook.
+ */
+ mc->bpmp = emc->bpmp;
+ }
+ }
+
return 0;

put_bpmp:
@@ -245,9 +371,12 @@ static int tegra186_emc_probe(struct platform_device *pdev)

static int tegra186_emc_remove(struct platform_device *pdev)
{
+ struct tegra_mc *mc = dev_get_drvdata(pdev->dev.parent);
struct tegra186_emc *emc = platform_get_drvdata(pdev);

debugfs_remove_recursive(emc->debugfs.root);
+
+ mc->bpmp = NULL;
tegra_bpmp_put(emc->bpmp);

return 0;
@@ -272,6 +401,7 @@ static struct platform_driver tegra186_emc_driver = {
.name = "tegra186-emc",
.of_match_table = tegra186_emc_of_match,
.suppress_bind_attrs = true,
+ .sync_state = icc_sync_state,
},
.probe = tegra186_emc_probe,
.remove = tegra186_emc_remove,
diff --git a/drivers/memory/tegra/tegra234.c b/drivers/memory/tegra/tegra234.c
index 02dcc5748bba..56d911926d54 100644
--- a/drivers/memory/tegra/tegra234.c
+++ b/drivers/memory/tegra/tegra234.c
@@ -1,18 +1,23 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2021-2022, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (C) 2022-2023, NVIDIA CORPORATION. All rights reserved.
*/

#include <soc/tegra/mc.h>

#include <dt-bindings/memory/tegra234-mc.h>
+#include <linux/interconnect.h>
+#include <linux/tegra-icc.h>

+#include <soc/tegra/bpmp.h>
#include "mc.h"

static const struct tegra_mc_client tegra234_mc_clients[] = {
{
.id = TEGRA234_MEMORY_CLIENT_MGBEARD,
.name = "mgbeard",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE,
.regs = {
.sid = {
@@ -23,6 +28,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBEBRD,
.name = "mgbebrd",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE_VF1,
.regs = {
.sid = {
@@ -33,6 +40,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBECRD,
.name = "mgbecrd",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE_VF2,
.regs = {
.sid = {
@@ -43,6 +52,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBEDRD,
.name = "mgbedrd",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE_VF3,
.regs = {
.sid = {
@@ -52,6 +63,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
},
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBEAWR,
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.name = "mgbeawr",
.sid = TEGRA234_SID_MGBE,
.regs = {
@@ -63,6 +76,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBEBWR,
.name = "mgbebwr",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE_VF1,
.regs = {
.sid = {
@@ -73,6 +88,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBECWR,
.name = "mgbecwr",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE_VF2,
.regs = {
.sid = {
@@ -83,6 +100,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_SDMMCRAB,
.name = "sdmmcrab",
+ .bpmp_id = TEGRA_ICC_BPMP_SDMMC_4,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_SDMMC4,
.regs = {
.sid = {
@@ -93,6 +112,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_MGBEDWR,
.name = "mgbedwr",
+ .bpmp_id = TEGRA_ICC_BPMP_EQOS,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_MGBE_VF3,
.regs = {
.sid = {
@@ -103,6 +124,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_SDMMCWAB,
.name = "sdmmcwab",
+ .bpmp_id = TEGRA_ICC_BPMP_SDMMC_4,
+ .type = TEGRA_ICC_NISO,
.sid = TEGRA234_SID_SDMMC4,
.regs = {
.sid = {
@@ -153,6 +176,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_APEDMAR,
.name = "apedmar",
+ .bpmp_id = TEGRA_ICC_BPMP_APEDMA,
+ .type = TEGRA_ICC_ISO_AUDIO,
.sid = TEGRA234_SID_APE,
.regs = {
.sid = {
@@ -163,6 +188,8 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
}, {
.id = TEGRA234_MEMORY_CLIENT_APEDMAW,
.name = "apedmaw",
+ .bpmp_id = TEGRA_ICC_BPMP_APEDMA,
+ .type = TEGRA_ICC_ISO_AUDIO,
.sid = TEGRA234_SID_APE,
.regs = {
.sid = {
@@ -333,6 +360,114 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
},
};

+/*
+ * tegra234_mc_icc_set() - Pass MC client info to the BPMP-FW
+ * @src: ICC node for Memory Controller's (MC) Client
+ * @dst: ICC node for Memory Controller (MC)
+ *
+ * Passing the current request info from the MC to the BPMP-FW where
+ * LA and PTSA registers are accessed and the final EMC freq is set
+ * based on client_id, type, latency and bandwidth.
+ * icc_set_bw() makes set_bw calls for both MC and EMC providers in
+ * sequence. Both the calls are protected by 'mutex_lock(&icc_lock)'.
+ * So, the data passed won't be updated by concurrent set calls from
+ * other clients.
+ */
+static int tegra234_mc_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+ struct tegra_mc *mc = icc_provider_to_tegra_mc(dst->provider);
+ struct mrq_bwmgr_int_request bwmgr_req = { 0 };
+ struct mrq_bwmgr_int_response bwmgr_resp = { 0 };
+ const struct tegra_mc_client *pclient = src->data;
+ struct tegra_bpmp_message msg;
+ int ret;
+
+ /*
+ * Same Src and Dst node will happen during boot from icc_node_add().
+ * This can be used to pre-initialize and set bandwidth for all clients
+ * before their drivers are loaded. We are skipping this case as for us,
+ * the pre-initialization already happened in Bootloader(MB2) and BPMP-FW.
+ */
+ if (src->id == dst->id)
+ return 0;
+
+ if (!mc->bwmgr_mrq_supported)
+ return -EINVAL;
+
+ if (!mc->bpmp) {
+ dev_err(mc->dev, "BPMP reference NULL\n");
+ return -ENOENT;
+ }
+
+ if (pclient->type == TEGRA_ICC_NISO)
+ bwmgr_req.bwmgr_calc_set_req.niso_bw = src->avg_bw;
+ else
+ bwmgr_req.bwmgr_calc_set_req.iso_bw = src->avg_bw;
+
+ bwmgr_req.bwmgr_calc_set_req.client_id = pclient->bpmp_id;
+
+ bwmgr_req.cmd = CMD_BWMGR_INT_CALC_AND_SET;
+ bwmgr_req.bwmgr_calc_set_req.mc_floor = src->peak_bw;
+ bwmgr_req.bwmgr_calc_set_req.floor_unit = BWMGR_INT_UNIT_KBPS;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.mrq = MRQ_BWMGR_INT;
+ msg.tx.data = &bwmgr_req;
+ msg.tx.size = sizeof(bwmgr_req);
+ msg.rx.data = &bwmgr_resp;
+ msg.rx.size = sizeof(bwmgr_resp);
+
+ ret = tegra_bpmp_transfer(mc->bpmp, &msg);
+ if (ret < 0) {
+ dev_err(mc->dev, "BPMP transfer failed: %d\n", ret);
+ goto error;
+ }
+ if (msg.rx.ret < 0) {
+ pr_err("failed to set bandwidth for %u: %d\n",
+ bwmgr_req.bwmgr_calc_set_req.client_id, msg.rx.ret);
+ ret = -EINVAL;
+ }
+
+error:
+ return ret;
+}
+
+static struct icc_node*
+tegra234_mc_of_icc_xlate(struct of_phandle_args *spec, void *data)
+{
+ struct tegra_mc *mc = icc_provider_to_tegra_mc(data);
+ unsigned int cl_id = spec->args[0];
+ struct icc_node *node;
+
+ list_for_each_entry(node, &mc->provider.nodes, node_list) {
+ if (node->id != cl_id)
+ continue;
+
+ return node;
+ }
+
+ /*
+ * If a client driver calls devm_of_icc_get() before the MC driver
+ * is probed, then return EPROBE_DEFER to the client driver.
+ */
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int tegra234_mc_icc_get_init_bw(struct icc_node *node, u32 *avg, u32 *peak)
+{
+ *avg = 0;
+ *peak = 0;
+
+ return 0;
+}
+
+static const struct tegra_mc_icc_ops tegra234_mc_icc_ops = {
+ .xlate = tegra234_mc_of_icc_xlate,
+ .aggregate = icc_std_aggregate,
+ .get_bw = tegra234_mc_icc_get_init_bw,
+ .set = tegra234_mc_icc_set,
+};
+
const struct tegra_mc_soc tegra234_mc_soc = {
.num_clients = ARRAY_SIZE(tegra234_mc_clients),
.clients = tegra234_mc_clients,
@@ -345,6 +480,7 @@ const struct tegra_mc_soc tegra234_mc_soc = {
MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM,
.has_addr_hi_reg = true,
.ops = &tegra186_mc_ops,
+ .icc_ops = &tegra234_mc_icc_ops,
.ch_intmask = 0x0000ff00,
.global_intstatus_channel_shift = 8,
/*
diff --git a/include/linux/tegra-icc.h b/include/linux/tegra-icc.h
new file mode 100644
index 000000000000..4b4d4bee290c
--- /dev/null
+++ b/include/linux/tegra-icc.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022-2023 NVIDIA CORPORATION. All rights reserved.
+ */
+
+#ifndef LINUX_TEGRA_ICC_H
+#define LINUX_TEGRA_ICC_H
+
+enum tegra_icc_client_type {
+ TEGRA_ICC_NONE,
+ TEGRA_ICC_NISO,
+ TEGRA_ICC_ISO_DISPLAY,
+ TEGRA_ICC_ISO_VI,
+ TEGRA_ICC_ISO_AUDIO,
+ TEGRA_ICC_ISO_VIFAL,
+};
+
+/* ICC ID's for MC client's used in BPMP */
+#define TEGRA_ICC_BPMP_DEBUG 1
+#define TEGRA_ICC_BPMP_CPU_CLUSTER0 2
+#define TEGRA_ICC_BPMP_CPU_CLUSTER1 3
+#define TEGRA_ICC_BPMP_CPU_CLUSTER2 4
+#define TEGRA_ICC_BPMP_GPU 5
+#define TEGRA_ICC_BPMP_CACTMON 6
+#define TEGRA_ICC_BPMP_DISPLAY 7
+#define TEGRA_ICC_BPMP_VI 8
+#define TEGRA_ICC_BPMP_EQOS 9
+#define TEGRA_ICC_BPMP_PCIE_0 10
+#define TEGRA_ICC_BPMP_PCIE_1 11
+#define TEGRA_ICC_BPMP_PCIE_2 12
+#define TEGRA_ICC_BPMP_PCIE_3 13
+#define TEGRA_ICC_BPMP_PCIE_4 14
+#define TEGRA_ICC_BPMP_PCIE_5 15
+#define TEGRA_ICC_BPMP_PCIE_6 16
+#define TEGRA_ICC_BPMP_PCIE_7 17
+#define TEGRA_ICC_BPMP_PCIE_8 18
+#define TEGRA_ICC_BPMP_PCIE_9 19
+#define TEGRA_ICC_BPMP_PCIE_10 20
+#define TEGRA_ICC_BPMP_DLA_0 21
+#define TEGRA_ICC_BPMP_DLA_1 22
+#define TEGRA_ICC_BPMP_SDMMC_1 23
+#define TEGRA_ICC_BPMP_SDMMC_2 24
+#define TEGRA_ICC_BPMP_SDMMC_3 25
+#define TEGRA_ICC_BPMP_SDMMC_4 26
+#define TEGRA_ICC_BPMP_NVDEC 27
+#define TEGRA_ICC_BPMP_NVENC 28
+#define TEGRA_ICC_BPMP_NVJPG_0 29
+#define TEGRA_ICC_BPMP_NVJPG_1 30
+#define TEGRA_ICC_BPMP_OFAA 31
+#define TEGRA_ICC_BPMP_XUSB_HOST 32
+#define TEGRA_ICC_BPMP_XUSB_DEV 33
+#define TEGRA_ICC_BPMP_TSEC 34
+#define TEGRA_ICC_BPMP_VIC 35
+#define TEGRA_ICC_BPMP_APE 36
+#define TEGRA_ICC_BPMP_APEDMA 37
+#define TEGRA_ICC_BPMP_SE 38
+#define TEGRA_ICC_BPMP_ISP 39
+#define TEGRA_ICC_BPMP_HDA 40
+#define TEGRA_ICC_BPMP_VIFAL 41
+#define TEGRA_ICC_BPMP_VI2FAL 42
+#define TEGRA_ICC_BPMP_VI2 43
+#define TEGRA_ICC_BPMP_RCE 44
+#define TEGRA_ICC_BPMP_PVA 45
+
+#endif /* LINUX_TEGRA_ICC_H */
diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h
index 51a2263e1bc5..900d88b26fae 100644
--- a/include/soc/tegra/mc.h
+++ b/include/soc/tegra/mc.h
@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/reset-controller.h>
#include <linux/types.h>
+#include <linux/tegra-icc.h>

struct clk;
struct device;
@@ -26,6 +27,8 @@ struct tegra_mc_timing {

struct tegra_mc_client {
unsigned int id;
+ unsigned int bpmp_id;
+ enum tegra_icc_client_type type;
const char *name;
/*
* For Tegra210 and earlier, this is the SWGROUP ID used for IOVA translations in the
@@ -166,8 +169,10 @@ struct tegra_mc_icc_ops {
int (*set)(struct icc_node *src, struct icc_node *dst);
int (*aggregate)(struct icc_node *node, u32 tag, u32 avg_bw,
u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
+ struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data);
struct icc_node_data *(*xlate_extended)(struct of_phandle_args *spec,
void *data);
+ int (*get_bw)(struct icc_node *node, u32 *avg, u32 *peak);
};

struct tegra_mc_ops {
@@ -214,6 +219,7 @@ struct tegra_mc_soc {
};

struct tegra_mc {
+ struct tegra_bpmp *bpmp;
struct device *dev;
struct tegra_smmu *smmu;
struct gart_device *gart;
@@ -229,6 +235,7 @@ struct tegra_mc {
struct tegra_mc_timing *timings;
unsigned int num_timings;

+ bool bwmgr_mrq_supported;
struct reset_controller_dev reset;

struct icc_provider provider;
--
2.17.1

2023-04-11 11:02:18

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 2/9] memory: tegra: add mc clients for Tegra234

Add few Isochronous (ISO) and Non-ISO MC clients.
ISO clients have guaranteed bandwidth requirement.
PCIE clients added to the mc_clients table represent
each controller in Tegra234.

Signed-off-by: Sumit Gupta <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
drivers/memory/tegra/tegra234.c | 420 ++++++++++++++++++++++++++++++++
1 file changed, 420 insertions(+)

diff --git a/drivers/memory/tegra/tegra234.c b/drivers/memory/tegra/tegra234.c
index 56d911926d54..a4ea181e1090 100644
--- a/drivers/memory/tegra/tegra234.c
+++ b/drivers/memory/tegra/tegra234.c
@@ -14,6 +14,30 @@

static const struct tegra_mc_client tegra234_mc_clients[] = {
{
+ .id = TEGRA234_MEMORY_CLIENT_HDAR,
+ .name = "hdar",
+ .bpmp_id = TEGRA_ICC_BPMP_HDA,
+ .type = TEGRA_ICC_ISO_AUDIO,
+ .sid = TEGRA234_SID_HDA,
+ .regs = {
+ .sid = {
+ .override = 0xa8,
+ .security = 0xac,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_HDAW,
+ .name = "hdaw",
+ .bpmp_id = TEGRA_ICC_BPMP_HDA,
+ .type = TEGRA_ICC_ISO_AUDIO,
+ .sid = TEGRA234_SID_HDA,
+ .regs = {
+ .sid = {
+ .override = 0x1a8,
+ .security = 0x1ac,
+ },
+ },
+ }, {
.id = TEGRA234_MEMORY_CLIENT_MGBEARD,
.name = "mgbeard",
.bpmp_id = TEGRA_ICC_BPMP_EQOS,
@@ -133,6 +157,90 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
.security = 0x33c,
},
},
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_VI2W,
+ .name = "vi2w",
+ .bpmp_id = TEGRA_ICC_BPMP_VI2,
+ .type = TEGRA_ICC_ISO_VI,
+ .sid = TEGRA234_SID_ISO_VI2,
+ .regs = {
+ .sid = {
+ .override = 0x380,
+ .security = 0x384,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_VI2FALR,
+ .name = "vi2falr",
+ .bpmp_id = TEGRA_ICC_BPMP_VI2FAL,
+ .type = TEGRA_ICC_ISO_VIFAL,
+ .sid = TEGRA234_SID_ISO_VI2FALC,
+ .regs = {
+ .sid = {
+ .override = 0x388,
+ .security = 0x38c,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_VI2FALW,
+ .name = "vi2falw",
+ .bpmp_id = TEGRA_ICC_BPMP_VI2FAL,
+ .type = TEGRA_ICC_ISO_VIFAL,
+ .sid = TEGRA234_SID_ISO_VI2FALC,
+ .regs = {
+ .sid = {
+ .override = 0x3e0,
+ .security = 0x3e4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_APER,
+ .name = "aper",
+ .bpmp_id = TEGRA_ICC_BPMP_APE,
+ .type = TEGRA_ICC_ISO_AUDIO,
+ .sid = TEGRA234_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x3d0,
+ .security = 0x3d4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_APEW,
+ .name = "apew",
+ .bpmp_id = TEGRA_ICC_BPMP_APE,
+ .type = TEGRA_ICC_ISO_AUDIO,
+ .sid = TEGRA234_SID_APE,
+ .regs = {
+ .sid = {
+ .override = 0x3d8,
+ .security = 0x3dc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_NVDISPLAYR,
+ .name = "nvdisplayr",
+ .bpmp_id = TEGRA_ICC_BPMP_DISPLAY,
+ .type = TEGRA_ICC_ISO_DISPLAY,
+ .sid = TEGRA234_SID_ISO_NVDISPLAY,
+ .regs = {
+ .sid = {
+ .override = 0x490,
+ .security = 0x494,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_NVDISPLAYR1,
+ .name = "nvdisplayr1",
+ .bpmp_id = TEGRA_ICC_BPMP_DISPLAY,
+ .type = TEGRA_ICC_ISO_DISPLAY,
+ .sid = TEGRA234_SID_ISO_NVDISPLAY,
+ .regs = {
+ .sid = {
+ .override = 0x508,
+ .security = 0x50c,
+ },
+ },
}, {
.id = TEGRA234_MEMORY_CLIENT_BPMPR,
.name = "bpmpr",
@@ -357,6 +465,318 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
.security = 0x37c,
},
},
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE0R,
+ .name = "pcie0r",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_0,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE0,
+ .regs = {
+ .sid = {
+ .override = 0x6c0,
+ .security = 0x6c4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE0W,
+ .name = "pcie0w",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_0,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE0,
+ .regs = {
+ .sid = {
+ .override = 0x6c8,
+ .security = 0x6cc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE1R,
+ .name = "pcie1r",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_1,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE1,
+ .regs = {
+ .sid = {
+ .override = 0x6d0,
+ .security = 0x6d4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE1W,
+ .name = "pcie1w",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_1,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE1,
+ .regs = {
+ .sid = {
+ .override = 0x6d8,
+ .security = 0x6dc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE2AR,
+ .name = "pcie2ar",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_2,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE2,
+ .regs = {
+ .sid = {
+ .override = 0x6e0,
+ .security = 0x6e4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE2AW,
+ .name = "pcie2aw",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_2,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE2,
+ .regs = {
+ .sid = {
+ .override = 0x6e8,
+ .security = 0x6ec,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE3R,
+ .name = "pcie3r",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_3,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE3,
+ .regs = {
+ .sid = {
+ .override = 0x6f0,
+ .security = 0x6f4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE3W,
+ .name = "pcie3w",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_3,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE3,
+ .regs = {
+ .sid = {
+ .override = 0x6f8,
+ .security = 0x6fc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE4R,
+ .name = "pcie4r",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_4,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE4,
+ .regs = {
+ .sid = {
+ .override = 0x700,
+ .security = 0x704,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE4W,
+ .name = "pcie4w",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_4,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE4,
+ .regs = {
+ .sid = {
+ .override = 0x708,
+ .security = 0x70c,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE5R,
+ .name = "pcie5r",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_5,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE5,
+ .regs = {
+ .sid = {
+ .override = 0x710,
+ .security = 0x714,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE5W,
+ .name = "pcie5w",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_5,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE5,
+ .regs = {
+ .sid = {
+ .override = 0x718,
+ .security = 0x71c,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE5R1,
+ .name = "pcie5r1",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_5,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE5,
+ .regs = {
+ .sid = {
+ .override = 0x778,
+ .security = 0x77c,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE6AR,
+ .name = "pcie6ar",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_6,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE6,
+ .regs = {
+ .sid = {
+ .override = 0x140,
+ .security = 0x144,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE6AW,
+ .name = "pcie6aw",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_6,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE6,
+ .regs = {
+ .sid = {
+ .override = 0x148,
+ .security = 0x14c,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE6AR1,
+ .name = "pcie6ar1",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_6,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE6,
+ .regs = {
+ .sid = {
+ .override = 0x1e8,
+ .security = 0x1ec,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE7AR,
+ .name = "pcie7ar",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_7,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE7,
+ .regs = {
+ .sid = {
+ .override = 0x150,
+ .security = 0x154,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE7AW,
+ .name = "pcie7aw",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_7,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE7,
+ .regs = {
+ .sid = {
+ .override = 0x180,
+ .security = 0x184,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE7AR1,
+ .name = "pcie7ar1",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_7,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE7,
+ .regs = {
+ .sid = {
+ .override = 0x248,
+ .security = 0x24c,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE8AR,
+ .name = "pcie8ar",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_8,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE8,
+ .regs = {
+ .sid = {
+ .override = 0x190,
+ .security = 0x194,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE8AW,
+ .name = "pcie8aw",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_8,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE8,
+ .regs = {
+ .sid = {
+ .override = 0x1d8,
+ .security = 0x1dc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE9AR,
+ .name = "pcie9ar",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_9,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE9,
+ .regs = {
+ .sid = {
+ .override = 0x1e0,
+ .security = 0x1e4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE9AW,
+ .name = "pcie9aw",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_9,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE9,
+ .regs = {
+ .sid = {
+ .override = 0x1f0,
+ .security = 0x1f4,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE10AR,
+ .name = "pcie10ar",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_10,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE10,
+ .regs = {
+ .sid = {
+ .override = 0x1f8,
+ .security = 0x1fc,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE10AW,
+ .name = "pcie10aw",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_10,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE10,
+ .regs = {
+ .sid = {
+ .override = 0x200,
+ .security = 0x204,
+ },
+ },
+ }, {
+ .id = TEGRA234_MEMORY_CLIENT_PCIE10AR1,
+ .name = "pcie10ar1",
+ .bpmp_id = TEGRA_ICC_BPMP_PCIE_10,
+ .type = TEGRA_ICC_NISO,
+ .sid = TEGRA234_SID_PCIE10,
+ .regs = {
+ .sid = {
+ .override = 0x240,
+ .security = 0x244,
+ },
+ },
},
};

--
2.17.1

2023-04-11 11:02:37

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 3/9] memory: tegra: add software mc clients in Tegra234

Add dummy Memory Controller clients to represent CPU clusters.
They will be used by the CPUFREQ driver to scale DRAM FREQ
with the CPU FREQ.

Signed-off-by: Sumit Gupta <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
drivers/memory/tegra/tegra234.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/memory/tegra/tegra234.c b/drivers/memory/tegra/tegra234.c
index a4ea181e1090..0fa68862749f 100644
--- a/drivers/memory/tegra/tegra234.c
+++ b/drivers/memory/tegra/tegra234.c
@@ -777,6 +777,21 @@ static const struct tegra_mc_client tegra234_mc_clients[] = {
.security = 0x244,
},
},
+ }, {
+ .id = TEGRA_ICC_MC_CPU_CLUSTER0,
+ .name = "sw_cluster0",
+ .bpmp_id = TEGRA_ICC_BPMP_CPU_CLUSTER0,
+ .type = TEGRA_ICC_NISO,
+ }, {
+ .id = TEGRA_ICC_MC_CPU_CLUSTER1,
+ .name = "sw_cluster1",
+ .bpmp_id = TEGRA_ICC_BPMP_CPU_CLUSTER1,
+ .type = TEGRA_ICC_NISO,
+ }, {
+ .id = TEGRA_ICC_MC_CPU_CLUSTER2,
+ .name = "sw_cluster2",
+ .bpmp_id = TEGRA_ICC_BPMP_CPU_CLUSTER2,
+ .type = TEGRA_ICC_NISO,
},
};

--
2.17.1

2023-04-11 11:03:10

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 4/9] dt-bindings: tegra: add icc ids for dummy MC clients

Add ICC id's for dummy software clients representing CCPLEX clusters.

Signed-off-by: Sumit Gupta <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
include/dt-bindings/memory/tegra234-mc.h | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/include/dt-bindings/memory/tegra234-mc.h b/include/dt-bindings/memory/tegra234-mc.h
index 347e55e89a2a..6e60d55491b3 100644
--- a/include/dt-bindings/memory/tegra234-mc.h
+++ b/include/dt-bindings/memory/tegra234-mc.h
@@ -536,4 +536,9 @@
#define TEGRA234_MEMORY_CLIENT_NVJPG1SRD 0x123
#define TEGRA234_MEMORY_CLIENT_NVJPG1SWR 0x124

+/* ICC ID's for dummy MC clients used to represent CPU Clusters */
+#define TEGRA_ICC_MC_CPU_CLUSTER0 1003
+#define TEGRA_ICC_MC_CPU_CLUSTER1 1004
+#define TEGRA_ICC_MC_CPU_CLUSTER2 1005
+
#endif
--
2.17.1

2023-04-11 11:03:33

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 5/9] memory: tegra: make cpu cluster bw request a multiple of mc channels

Make CPU cluster's bandwidth (BW) request a multiple of MC channels.
CPU OPP tables have BW info per MC channel. But, the actual BW depends
on the number of MC channels which can change as per the boot config.
Get the number of MC channels which are actually enabled in current
boot configuration and multiply the BW request from a CPU cluster with
the number of enabled MC channels. This is not required to be done for
other MC clients.

Signed-off-by: Sumit Gupta <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
drivers/memory/tegra/mc.c | 19 +++++++++++++++++++
drivers/memory/tegra/mc.h | 1 +
drivers/memory/tegra/tegra234.c | 24 +++++++++++++++++++++++-
include/soc/tegra/mc.h | 1 +
4 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c
index 983455b1f98d..4a750da1c12a 100644
--- a/drivers/memory/tegra/mc.c
+++ b/drivers/memory/tegra/mc.c
@@ -843,6 +843,23 @@ static int tegra_mc_interconnect_setup(struct tegra_mc *mc)
return err;
}

+static void tegra_mc_num_channel_enabled(struct tegra_mc *mc)
+{
+ unsigned int i;
+ u32 value;
+
+ value = mc_ch_readl(mc, 0, MC_EMEM_ADR_CFG_CHANNEL_ENABLE);
+ if (value <= 0) {
+ mc->num_channels = mc->soc->num_channels;
+ return;
+ }
+
+ for (i = 0; i < 32; i++) {
+ if (value & BIT(i))
+ mc->num_channels++;
+ }
+}
+
static int tegra_mc_probe(struct platform_device *pdev)
{
struct tegra_mc *mc;
@@ -881,6 +898,8 @@ static int tegra_mc_probe(struct platform_device *pdev)
return err;
}

+ tegra_mc_num_channel_enabled(mc);
+
if (mc->soc->ops && mc->soc->ops->handle_irq) {
mc->irq = platform_get_irq(pdev, 0);
if (mc->irq < 0)
diff --git a/drivers/memory/tegra/mc.h b/drivers/memory/tegra/mc.h
index bc01586b6560..c3f6655bec60 100644
--- a/drivers/memory/tegra/mc.h
+++ b/drivers/memory/tegra/mc.h
@@ -53,6 +53,7 @@
#define MC_ERR_ROUTE_SANITY_ADR 0x9c4
#define MC_ERR_GENERALIZED_CARVEOUT_STATUS 0xc00
#define MC_ERR_GENERALIZED_CARVEOUT_ADR 0xc04
+#define MC_EMEM_ADR_CFG_CHANNEL_ENABLE 0xdf8
#define MC_GLOBAL_INTSTATUS 0xf24
#define MC_ERR_ADR_HI 0x11fc

diff --git a/drivers/memory/tegra/tegra234.c b/drivers/memory/tegra/tegra234.c
index 0fa68862749f..8e873a7bc34f 100644
--- a/drivers/memory/tegra/tegra234.c
+++ b/drivers/memory/tegra/tegra234.c
@@ -867,6 +867,28 @@ static int tegra234_mc_icc_set(struct icc_node *src, struct icc_node *dst)
return ret;
}

+static int tegra234_mc_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+ struct icc_provider *p = node->provider;
+ struct tegra_mc *mc = icc_provider_to_tegra_mc(p);
+
+ if (!mc->bwmgr_mrq_supported)
+ return -EINVAL;
+
+ if (node->id == TEGRA_ICC_MC_CPU_CLUSTER0 ||
+ node->id == TEGRA_ICC_MC_CPU_CLUSTER1 ||
+ node->id == TEGRA_ICC_MC_CPU_CLUSTER2) {
+ if (mc)
+ peak_bw = peak_bw * mc->num_channels;
+ }
+
+ *agg_avg += avg_bw;
+ *agg_peak = max(*agg_peak, peak_bw);
+
+ return 0;
+}
+
static struct icc_node*
tegra234_mc_of_icc_xlate(struct of_phandle_args *spec, void *data)
{
@@ -898,7 +920,7 @@ static int tegra234_mc_icc_get_init_bw(struct icc_node *node, u32 *avg, u32 *pea

static const struct tegra_mc_icc_ops tegra234_mc_icc_ops = {
.xlate = tegra234_mc_of_icc_xlate,
- .aggregate = icc_std_aggregate,
+ .aggregate = tegra234_mc_icc_aggregate,
.get_bw = tegra234_mc_icc_get_init_bw,
.set = tegra234_mc_icc_set,
};
diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h
index 900d88b26fae..fc3001483e62 100644
--- a/include/soc/tegra/mc.h
+++ b/include/soc/tegra/mc.h
@@ -234,6 +234,7 @@ struct tegra_mc {

struct tegra_mc_timing *timings;
unsigned int num_timings;
+ unsigned int num_channels;

bool bwmgr_mrq_supported;
struct reset_controller_dev reset;
--
2.17.1

2023-04-11 11:03:44

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 6/9] cpufreq: tegra194: add OPP support and set bandwidth

Add support to use OPP table from DT in Tegra194 cpufreq driver.
Tegra SoC's receive the frequency lookup table (LUT) from BPMP-FW.
Cross check the OPP's present in DT against the LUT from BPMP-FW
and enable only those DT OPP's which are present in LUT also.

The OPP table in DT has CPU Frequency to bandwidth mapping where
the bandwidth value is per MC channel. DRAM bandwidth depends on the
number of MC channels which can vary as per the boot configuration.
This per channel bandwidth from OPP table will be later converted by
MC driver to final bandwidth value by multiplying with number of
channels before sending the request to BPMP-FW.

If OPP table is not present in DT, then use the LUT from BPMP-FW
directy as the CPU frequency table and not do the DRAM frequency
scaling which is same as the current behavior.

Now, as the CPU Frequency table is being controlling through OPP
table in DT. Keeping fewer entries in the table will create less
frequency steps and can help to scale fast to high frequencies
when required.

Signed-off-by: Sumit Gupta <[email protected]>
---
drivers/cpufreq/tegra194-cpufreq.c | 156 ++++++++++++++++++++++++++---
1 file changed, 143 insertions(+), 13 deletions(-)

diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c
index 5890e25d7f77..c8d03346068a 100644
--- a/drivers/cpufreq/tegra194-cpufreq.c
+++ b/drivers/cpufreq/tegra194-cpufreq.c
@@ -12,6 +12,7 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/units.h>

#include <asm/smp_plat.h>

@@ -65,12 +66,36 @@ struct tegra_cpufreq_soc {

struct tegra194_cpufreq_data {
void __iomem *regs;
- struct cpufreq_frequency_table **tables;
+ struct cpufreq_frequency_table **bpmp_luts;
const struct tegra_cpufreq_soc *soc;
+ bool icc_dram_bw_scaling;
};

static struct workqueue_struct *read_counters_wq;

+static int tegra_cpufreq_set_bw(struct cpufreq_policy *policy, unsigned long freq_khz)
+{
+ struct tegra194_cpufreq_data *data = cpufreq_get_driver_data();
+ struct dev_pm_opp *opp;
+ struct device *dev;
+ int ret;
+
+ dev = get_cpu_device(policy->cpu);
+ if (!dev)
+ return -ENODEV;
+
+ opp = dev_pm_opp_find_freq_exact(dev, freq_khz * KHZ, true);
+ if (IS_ERR(opp))
+ return PTR_ERR(opp);
+
+ ret = dev_pm_opp_set_opp(dev, opp);
+ if (ret)
+ data->icc_dram_bw_scaling = false;
+
+ dev_pm_opp_put(opp);
+ return ret;
+}
+
static void tegra_get_cpu_mpidr(void *mpidr)
{
*((u64 *)mpidr) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
@@ -354,7 +379,7 @@ static unsigned int tegra194_get_speed(u32 cpu)
* to the last written ndiv value from freq_table. This is
* done to return consistent value.
*/
- cpufreq_for_each_valid_entry(pos, data->tables[clusterid]) {
+ cpufreq_for_each_valid_entry(pos, data->bpmp_luts[clusterid]) {
if (pos->driver_data != ndiv)
continue;

@@ -369,16 +394,93 @@ static unsigned int tegra194_get_speed(u32 cpu)
return rate;
}

+static int tegra_cpufreq_init_cpufreq_table(struct cpufreq_policy *policy,
+ struct cpufreq_frequency_table *bpmp_lut,
+ struct cpufreq_frequency_table **opp_table)
+{
+ struct tegra194_cpufreq_data *data = cpufreq_get_driver_data();
+ struct cpufreq_frequency_table *freq_table = NULL;
+ struct cpufreq_frequency_table *pos;
+ struct device *cpu_dev;
+ struct dev_pm_opp *opp;
+ unsigned long rate;
+ int ret, max_opps;
+ int j = 0;
+
+ cpu_dev = get_cpu_device(policy->cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__, policy->cpu);
+ return -ENODEV;
+ }
+
+ /* Initialize OPP table mentioned in operating-points-v2 property in DT */
+ ret = dev_pm_opp_of_add_table_indexed(cpu_dev, 0);
+ if (!ret) {
+ max_opps = dev_pm_opp_get_opp_count(cpu_dev);
+ if (max_opps <= 0) {
+ dev_err(cpu_dev, "Failed to add OPPs\n");
+ return max_opps;
+ }
+
+ /* Disable all opps and cross-validate against LUT later */
+ for (rate = 0; ; rate++) {
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
+ if (IS_ERR(opp))
+ break;
+
+ dev_pm_opp_put(opp);
+ dev_pm_opp_disable(cpu_dev, rate);
+ }
+ } else {
+ dev_err(cpu_dev, "Invalid or empty opp table in device tree\n");
+ data->icc_dram_bw_scaling = false;
+ return ret;
+ }
+
+ freq_table = kcalloc((max_opps + 1), sizeof(*freq_table), GFP_KERNEL);
+ if (!freq_table)
+ return -ENOMEM;
+
+ /*
+ * Cross check the frequencies from BPMP-FW LUT against the OPP's present in DT.
+ * Enable only those DT OPP's which are present in LUT also.
+ */
+ cpufreq_for_each_valid_entry(pos, bpmp_lut) {
+ opp = dev_pm_opp_find_freq_exact(cpu_dev, pos->frequency * KHZ, false);
+ if (IS_ERR(opp))
+ continue;
+
+ ret = dev_pm_opp_enable(cpu_dev, pos->frequency * KHZ);
+ if (ret < 0)
+ return ret;
+
+ freq_table[j].driver_data = pos->driver_data;
+ freq_table[j].frequency = pos->frequency;
+ j++;
+ }
+
+ freq_table[j].driver_data = pos->driver_data;
+ freq_table[j].frequency = CPUFREQ_TABLE_END;
+
+ *opp_table = &freq_table[0];
+
+ dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
+
+ return ret;
+}
+
static int tegra194_cpufreq_init(struct cpufreq_policy *policy)
{
struct tegra194_cpufreq_data *data = cpufreq_get_driver_data();
int maxcpus_per_cluster = data->soc->maxcpus_per_cluster;
+ struct cpufreq_frequency_table *freq_table;
+ struct cpufreq_frequency_table *bpmp_lut;
u32 start_cpu, cpu;
u32 clusterid;
+ int ret;

data->soc->ops->get_cpu_cluster_id(policy->cpu, NULL, &clusterid);
-
- if (clusterid >= data->soc->num_clusters || !data->tables[clusterid])
+ if (clusterid >= data->soc->num_clusters || !data->bpmp_luts[clusterid])
return -EINVAL;

start_cpu = rounddown(policy->cpu, maxcpus_per_cluster);
@@ -387,9 +489,22 @@ static int tegra194_cpufreq_init(struct cpufreq_policy *policy)
if (cpu_possible(cpu))
cpumask_set_cpu(cpu, policy->cpus);
}
- policy->freq_table = data->tables[clusterid];
policy->cpuinfo.transition_latency = TEGRA_CPUFREQ_TRANSITION_LATENCY;

+ bpmp_lut = data->bpmp_luts[clusterid];
+
+ if (data->icc_dram_bw_scaling) {
+ ret = tegra_cpufreq_init_cpufreq_table(policy, bpmp_lut, &freq_table);
+ if (!ret) {
+ policy->freq_table = freq_table;
+ return 0;
+ }
+ }
+
+ data->icc_dram_bw_scaling = false;
+ policy->freq_table = bpmp_lut;
+ pr_info("OPP tables missing from DT, EMC frequency scaling disabled\n");
+
return 0;
}

@@ -406,6 +521,9 @@ static int tegra194_cpufreq_set_target(struct cpufreq_policy *policy,
*/
data->soc->ops->set_cpu_ndiv(policy, (u64)tbl->driver_data);

+ if (data->icc_dram_bw_scaling)
+ tegra_cpufreq_set_bw(policy, tbl->frequency);
+
return 0;
}

@@ -439,8 +557,8 @@ static void tegra194_cpufreq_free_resources(void)
}

static struct cpufreq_frequency_table *
-init_freq_table(struct platform_device *pdev, struct tegra_bpmp *bpmp,
- unsigned int cluster_id)
+tegra_cpufreq_bpmp_read_lut(struct platform_device *pdev, struct tegra_bpmp *bpmp,
+ unsigned int cluster_id)
{
struct cpufreq_frequency_table *freq_table;
struct mrq_cpu_ndiv_limits_response resp;
@@ -515,6 +633,7 @@ static int tegra194_cpufreq_probe(struct platform_device *pdev)
const struct tegra_cpufreq_soc *soc;
struct tegra194_cpufreq_data *data;
struct tegra_bpmp *bpmp;
+ struct device *cpu_dev;
int err, i;

data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -530,9 +649,9 @@ static int tegra194_cpufreq_probe(struct platform_device *pdev)
return -EINVAL;
}

- data->tables = devm_kcalloc(&pdev->dev, data->soc->num_clusters,
- sizeof(*data->tables), GFP_KERNEL);
- if (!data->tables)
+ data->bpmp_luts = devm_kcalloc(&pdev->dev, data->soc->num_clusters,
+ sizeof(*data->bpmp_luts), GFP_KERNEL);
+ if (!data->bpmp_luts)
return -ENOMEM;

if (soc->actmon_cntr_base) {
@@ -556,15 +675,26 @@ static int tegra194_cpufreq_probe(struct platform_device *pdev)
}

for (i = 0; i < data->soc->num_clusters; i++) {
- data->tables[i] = init_freq_table(pdev, bpmp, i);
- if (IS_ERR(data->tables[i])) {
- err = PTR_ERR(data->tables[i]);
+ data->bpmp_luts[i] = tegra_cpufreq_bpmp_read_lut(pdev, bpmp, i);
+ if (IS_ERR(data->bpmp_luts[i])) {
+ err = PTR_ERR(data->bpmp_luts[i]);
goto err_free_res;
}
}

tegra194_cpufreq_driver.driver_data = data;

+ /* Check for optional OPPv2 and interconnect paths on CPU0 to enable ICC scaling */
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev)
+ return -EPROBE_DEFER;
+
+ if (dev_pm_opp_of_get_opp_desc_node(cpu_dev)) {
+ err = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL);
+ if (!err)
+ data->icc_dram_bw_scaling = true;
+ }
+
err = cpufreq_register_driver(&tegra194_cpufreq_driver);
if (!err)
goto put_bpmp;
--
2.17.1

2023-04-11 11:03:50

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 7/9] PCI: tegra194: Fix possible array out of bounds access

Add check to fix the possible array out of bounds violation by
making speed equal to GEN1_CORE_CLK_FREQ when its value is more
than the size of "pcie_gen_freq" array. This array has size of
four but possible speed (CLS) values are from "0 to 0xF". So,
"speed - 1" values are "-1 to 0xE". This change was suggested by
"Bjorn Helgaas" in the below link.

Suggested-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sumit Gupta <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
---
drivers/pci/controller/dwc/pcie-tegra194.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 09825b4a075e..e6eec85480ca 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -223,6 +223,7 @@
#define EP_STATE_ENABLED 1

static const unsigned int pcie_gen_freq[] = {
+ GEN1_CORE_CLK_FREQ, /* PCI_EXP_LNKSTA_CLS == 0; undefined */
GEN1_CORE_CLK_FREQ,
GEN2_CORE_CLK_FREQ,
GEN3_CORE_CLK_FREQ,
@@ -459,7 +460,11 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)

speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
PCI_EXP_LNKSTA_CLS;
- clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
+
+ if (speed >= ARRAY_SIZE(pcie_gen_freq))
+ speed = 0;
+
+ clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);

if (pcie->of_data->has_ltr_req_fix)
return IRQ_HANDLED;
@@ -1020,7 +1025,11 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)

speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
PCI_EXP_LNKSTA_CLS;
- clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
+
+ if (speed >= ARRAY_SIZE(pcie_gen_freq))
+ speed = 0;
+
+ clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);

tegra_pcie_enable_interrupts(pp);

--
2.17.1

2023-04-11 11:04:07

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 8/9] PCI: tegra194: Add interconnect support in Tegra234

Add support to request DRAM bandwidth with Memory Interconnect
in Tegra234 SoC. The DRAM BW required for different modes depends
on speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
Currently, no latency is observed in data transfer with PCI as the
DRAM Freq is always set to max. But that results in high power
consumption. Now for Tegra234, we are enabling the dynamic scaling
of the DRAM Freq based on requests from Clients instead of running
at the max Freq always. This change does that for PCI MC client.

Suggested-by: Manikanta Maddireddy <[email protected]>
Signed-off-by: Sumit Gupta <[email protected]>
---
drivers/pci/controller/dwc/pcie-tegra194.c | 51 +++++++++++++++-------
1 file changed, 35 insertions(+), 16 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index e6eec85480ca..4fdadc7b045f 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
+#include <linux/interconnect.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
@@ -288,6 +289,7 @@ struct tegra_pcie_dw {
unsigned int pex_rst_irq;
int ep_state;
long link_status;
+ struct icc_path *icc_path;
};

static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
@@ -310,6 +312,27 @@ struct tegra_pcie_soc {
enum dw_pcie_device_mode mode;
};

+static void tegra_pcie_icc_set(struct tegra_pcie_dw *pcie)
+{
+ struct dw_pcie *pci = &pcie->pci;
+ u32 val, speed, width;
+
+ val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA);
+
+ speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
+ width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
+
+ val = width * (PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE);
+
+ if (icc_set_bw(pcie->icc_path, MBps_to_icc(val), 0))
+ dev_err(pcie->dev, "can't set bw[%u]\n", val);
+
+ if (speed >= ARRAY_SIZE(pcie_gen_freq))
+ speed = 0;
+
+ clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
+}
+
static void apply_bad_link_workaround(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -453,18 +476,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
struct tegra_pcie_dw *pcie = arg;
struct dw_pcie_ep *ep = &pcie->pci.ep;
struct dw_pcie *pci = &pcie->pci;
- u32 val, speed;
+ u32 val;

if (test_and_clear_bit(0, &pcie->link_status))
dw_pcie_ep_linkup(ep);

- speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
- PCI_EXP_LNKSTA_CLS;
-
- if (speed >= ARRAY_SIZE(pcie_gen_freq))
- speed = 0;
-
- clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
+ tegra_pcie_icc_set(pcie);

if (pcie->of_data->has_ltr_req_fix)
return IRQ_HANDLED;
@@ -950,9 +967,9 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)

static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
{
- u32 val, offset, speed, tmp;
struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
struct dw_pcie_rp *pp = &pci->pp;
+ u32 val, offset, tmp;
bool retry = true;

if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
@@ -1023,13 +1040,7 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
goto retry_link;
}

- speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
- PCI_EXP_LNKSTA_CLS;
-
- if (speed >= ARRAY_SIZE(pcie_gen_freq))
- speed = 0;
-
- clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
+ tegra_pcie_icc_set(pcie);

tegra_pcie_enable_interrupts(pp);

@@ -2233,6 +2244,14 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, pcie);

+ pcie->icc_path = devm_of_icc_get(&pdev->dev, "write");
+ ret = PTR_ERR_OR_ZERO(pcie->icc_path);
+ if (ret) {
+ tegra_bpmp_put(pcie->bpmp);
+ dev_err_probe(&pdev->dev, ret, "failed to get write interconnect\n");
+ return ret;
+ }
+
switch (pcie->of_data->mode) {
case DW_PCIE_RC_TYPE:
ret = devm_request_irq(dev, pp->irq, tegra_pcie_rp_irq_handler,
--
2.17.1

2023-04-11 11:04:45

by Sumit Gupta

[permalink] [raw]
Subject: [Patch v6 9/9] arm64: tegra: Add cpu OPP tables and interconnects property

Add OPP table and interconnects property to scale DDR frequency with
CPU frequency for better performance. Each operating point entry of
the OPP table has CPU freq to per MC channel bandwidth mapping.
One table is added for each cluster even though the table data is
same because the bandwidth request is per cluster. This is done
because OPP framework creates a single icc path and hence single
bandwidth request if the table is marked as 'opp-shared' and shared
among all clusters. For us, the OPP table data is same but the MC
Client ID argument to interconnects property is different for each
cluster. So, having per cluster table makes different icc path for
each cluster and helps to make per cluster BW requests.

Signed-off-by: Sumit Gupta <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 276 +++++++++++++++++++++++
1 file changed, 276 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 5d354f8923b4..8d0b89b5733e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -3011,6 +3011,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl0_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3027,6 +3030,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl0_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3043,6 +3049,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl0_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3059,6 +3068,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl0_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3075,6 +3087,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl1_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3091,6 +3106,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl1_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3107,6 +3125,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl1_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3123,6 +3144,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl1_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3139,6 +3163,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl2_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3155,6 +3182,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl2_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3171,6 +3201,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl2_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3187,6 +3220,9 @@

enable-method = "psci";

+ operating-points-v2 = <&cl2_opp_tbl>;
+ interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
i-cache-size = <65536>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
@@ -3461,4 +3497,244 @@
interrupt-parent = <&gic>;
always-on;
};
+
+ cl0_opp_tbl: opp-table-cluster0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cl0_ch1_opp1: opp-115200000 {
+ opp-hz = /bits/ 64 <115200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp2: opp-268800000 {
+ opp-hz = /bits/ 64 <268800000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp3: opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp4: opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp5: opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp6: opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp7: opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp8: opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl0_ch1_opp9: opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ opp-peak-kBps = <1632000>;
+ };
+
+ cl0_ch1_opp10: opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <1632000>;
+ };
+
+ cl0_ch1_opp11: opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <2660000>;
+ };
+
+ cl0_ch1_opp12: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <2660000>;
+ };
+
+ cl0_ch1_opp13: opp-1958400000 {
+ opp-hz = /bits/ 64 <1958400000>;
+ opp-peak-kBps = <3200000>;
+ };
+
+ cl0_ch1_opp14: opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <6400000>;
+ };
+
+ cl0_ch1_opp15: opp-2201600000 {
+ opp-hz = /bits/ 64 <2201600000>;
+ opp-peak-kBps = <6400000>;
+ };
+ };
+
+ cl1_opp_tbl: opp-table-cluster1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cl1_ch1_opp1: opp-115200000 {
+ opp-hz = /bits/ 64 <115200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp2: opp-268800000 {
+ opp-hz = /bits/ 64 <268800000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp3: opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp4: opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp5: opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp6: opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp7: opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp8: opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl1_ch1_opp9: opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ opp-peak-kBps = <1632000>;
+ };
+
+ cl1_ch1_opp10: opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <1632000>;
+ };
+
+ cl1_ch1_opp11: opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <2660000>;
+ };
+
+ cl1_ch1_opp12: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <2660000>;
+ };
+
+ cl1_ch1_opp13: opp-1958400000 {
+ opp-hz = /bits/ 64 <1958400000>;
+ opp-peak-kBps = <3200000>;
+ };
+
+ cl1_ch1_opp14: opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <6400000>;
+ };
+
+ cl1_ch1_opp15: opp-2201600000 {
+ opp-hz = /bits/ 64 <2201600000>;
+ opp-peak-kBps = <6400000>;
+ };
+ };
+
+ cl2_opp_tbl: opp-table-cluster2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cl2_ch1_opp1: opp-115200000 {
+ opp-hz = /bits/ 64 <115200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp2: opp-268800000 {
+ opp-hz = /bits/ 64 <268800000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp3: opp-422400000 {
+ opp-hz = /bits/ 64 <422400000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp4: opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp5: opp-729600000 {
+ opp-hz = /bits/ 64 <729600000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp6: opp-883200000 {
+ opp-hz = /bits/ 64 <883200000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp7: opp-1036800000 {
+ opp-hz = /bits/ 64 <1036800000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp8: opp-1190400000 {
+ opp-hz = /bits/ 64 <1190400000>;
+ opp-peak-kBps = <816000>;
+ };
+
+ cl2_ch1_opp9: opp-1344000000 {
+ opp-hz = /bits/ 64 <1344000000>;
+ opp-peak-kBps = <1632000>;
+ };
+
+ cl2_ch1_opp10: opp-1497600000 {
+ opp-hz = /bits/ 64 <1497600000>;
+ opp-peak-kBps = <1632000>;
+ };
+
+ cl2_ch1_opp11: opp-1651200000 {
+ opp-hz = /bits/ 64 <1651200000>;
+ opp-peak-kBps = <2660000>;
+ };
+
+ cl2_ch1_opp12: opp-1804800000 {
+ opp-hz = /bits/ 64 <1804800000>;
+ opp-peak-kBps = <2660000>;
+ };
+
+ cl2_ch1_opp13: opp-1958400000 {
+ opp-hz = /bits/ 64 <1958400000>;
+ opp-peak-kBps = <3200000>;
+ };
+
+ cl2_ch1_opp14: opp-2112000000 {
+ opp-hz = /bits/ 64 <2112000000>;
+ opp-peak-kBps = <6400000>;
+ };
+
+ cl2_ch1_opp15: opp-2201600000 {
+ opp-hz = /bits/ 64 <2201600000>;
+ opp-peak-kBps = <6400000>;
+ };
+ };
};
--
2.17.1

2023-04-13 14:59:25

by Lorenzo Pieralisi

[permalink] [raw]
Subject: Re: [Patch v6 8/9] PCI: tegra194: Add interconnect support in Tegra234

On Tue, Apr 11, 2023 at 04:30:01PM +0530, Sumit Gupta wrote:
> Add support to request DRAM bandwidth with Memory Interconnect
> in Tegra234 SoC. The DRAM BW required for different modes depends
> on speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
> Currently, no latency is observed in data transfer with PCI as the
> DRAM Freq is always set to max. But that results in high power
> consumption. Now for Tegra234, we are enabling the dynamic scaling
> of the DRAM Freq based on requests from Clients instead of running
> at the max Freq always. This change does that for PCI MC client.

I am sorry but this is still unclear to me. The sentence above makes
me think that you are *adding* latency to the data transfer trading
it with lower power consumption; probably that's a wrong parsing of
what you are saying - so please explain what you want to say
with "no latency is observed" and whether this patch changes that
(which is not allowed because that would count as a regression).

Thanks,
Lorenzo

>
> Suggested-by: Manikanta Maddireddy <[email protected]>
> Signed-off-by: Sumit Gupta <[email protected]>
> ---
> drivers/pci/controller/dwc/pcie-tegra194.c | 51 +++++++++++++++-------
> 1 file changed, 35 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index e6eec85480ca..4fdadc7b045f 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -14,6 +14,7 @@
> #include <linux/delay.h>
> #include <linux/gpio.h>
> #include <linux/gpio/consumer.h>
> +#include <linux/interconnect.h>
> #include <linux/interrupt.h>
> #include <linux/iopoll.h>
> #include <linux/kernel.h>
> @@ -288,6 +289,7 @@ struct tegra_pcie_dw {
> unsigned int pex_rst_irq;
> int ep_state;
> long link_status;
> + struct icc_path *icc_path;
> };
>
> static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
> @@ -310,6 +312,27 @@ struct tegra_pcie_soc {
> enum dw_pcie_device_mode mode;
> };
>
> +static void tegra_pcie_icc_set(struct tegra_pcie_dw *pcie)
> +{
> + struct dw_pcie *pci = &pcie->pci;
> + u32 val, speed, width;
> +
> + val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA);
> +
> + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
> + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
> +
> + val = width * (PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE);
> +
> + if (icc_set_bw(pcie->icc_path, MBps_to_icc(val), 0))
> + dev_err(pcie->dev, "can't set bw[%u]\n", val);
> +
> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
> + speed = 0;
> +
> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
> +}
> +
> static void apply_bad_link_workaround(struct dw_pcie_rp *pp)
> {
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -453,18 +476,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
> struct tegra_pcie_dw *pcie = arg;
> struct dw_pcie_ep *ep = &pcie->pci.ep;
> struct dw_pcie *pci = &pcie->pci;
> - u32 val, speed;
> + u32 val;
>
> if (test_and_clear_bit(0, &pcie->link_status))
> dw_pcie_ep_linkup(ep);
>
> - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
> - PCI_EXP_LNKSTA_CLS;
> -
> - if (speed >= ARRAY_SIZE(pcie_gen_freq))
> - speed = 0;
> -
> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
> + tegra_pcie_icc_set(pcie);
>
> if (pcie->of_data->has_ltr_req_fix)
> return IRQ_HANDLED;
> @@ -950,9 +967,9 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
>
> static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
> {
> - u32 val, offset, speed, tmp;
> struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
> struct dw_pcie_rp *pp = &pci->pp;
> + u32 val, offset, tmp;
> bool retry = true;
>
> if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
> @@ -1023,13 +1040,7 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
> goto retry_link;
> }
>
> - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
> - PCI_EXP_LNKSTA_CLS;
> -
> - if (speed >= ARRAY_SIZE(pcie_gen_freq))
> - speed = 0;
> -
> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
> + tegra_pcie_icc_set(pcie);
>
> tegra_pcie_enable_interrupts(pp);
>
> @@ -2233,6 +2244,14 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, pcie);
>
> + pcie->icc_path = devm_of_icc_get(&pdev->dev, "write");
> + ret = PTR_ERR_OR_ZERO(pcie->icc_path);
> + if (ret) {
> + tegra_bpmp_put(pcie->bpmp);
> + dev_err_probe(&pdev->dev, ret, "failed to get write interconnect\n");
> + return ret;
> + }
> +
> switch (pcie->of_data->mode) {
> case DW_PCIE_RC_TYPE:
> ret = devm_request_irq(dev, pp->irq, tegra_pcie_rp_irq_handler,
> --
> 2.17.1
>

2023-04-14 11:01:49

by Sumit Gupta

[permalink] [raw]
Subject: Re: [Patch v6 8/9] PCI: tegra194: Add interconnect support in Tegra234



On 13/04/23 20:22, Lorenzo Pieralisi wrote:
> External email: Use caution opening links or attachments
>
>
> On Tue, Apr 11, 2023 at 04:30:01PM +0530, Sumit Gupta wrote:
>> Add support to request DRAM bandwidth with Memory Interconnect
>> in Tegra234 SoC. The DRAM BW required for different modes depends
>> on speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
>> Currently, no latency is observed in data transfer with PCI as the
>> DRAM Freq is always set to max. But that results in high power
>> consumption. Now for Tegra234, we are enabling the dynamic scaling
>> of the DRAM Freq based on requests from Clients instead of running
>> at the max Freq always. This change does that for PCI MC client.
>
> I am sorry but this is still unclear to me. The sentence above makes
> me think that you are *adding* latency to the data transfer trading
> it with lower power consumption; probably that's a wrong parsing of
> what you are saying - so please explain what you want to say
> with "no latency is observed" and whether this patch changes that
> (which is not allowed because that would count as a regression).
>
> Thanks,
> Lorenzo
>

Rephrased as below. Please suggest if it is clear now.

Add support to request DRAM bandwidth with Memory Interconnect in
Tegra234 SoC. The DRAM BW required for different modes depends on
speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
Currently, the DRAM freq is always set to max but that results in
higher power consumption. Memory Interconnect feature adds capability
for MC clients to request BW and scale the DRAM freq dynamically to
provide the requested BW.

Thank you,
Sumit Gupta

>>
>> Suggested-by: Manikanta Maddireddy <[email protected]>
>> Signed-off-by: Sumit Gupta <[email protected]>
>> ---
>> drivers/pci/controller/dwc/pcie-tegra194.c | 51 +++++++++++++++-------
>> 1 file changed, 35 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
>> index e6eec85480ca..4fdadc7b045f 100644
>> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
>> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
>> @@ -14,6 +14,7 @@
>> #include <linux/delay.h>
>> #include <linux/gpio.h>
>> #include <linux/gpio/consumer.h>
>> +#include <linux/interconnect.h>
>> #include <linux/interrupt.h>
>> #include <linux/iopoll.h>
>> #include <linux/kernel.h>
>> @@ -288,6 +289,7 @@ struct tegra_pcie_dw {
>> unsigned int pex_rst_irq;
>> int ep_state;
>> long link_status;
>> + struct icc_path *icc_path;
>> };
>>
>> static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
>> @@ -310,6 +312,27 @@ struct tegra_pcie_soc {
>> enum dw_pcie_device_mode mode;
>> };
>>
>> +static void tegra_pcie_icc_set(struct tegra_pcie_dw *pcie)
>> +{
>> + struct dw_pcie *pci = &pcie->pci;
>> + u32 val, speed, width;
>> +
>> + val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA);
>> +
>> + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
>> + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
>> +
>> + val = width * (PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE);
>> +
>> + if (icc_set_bw(pcie->icc_path, MBps_to_icc(val), 0))
>> + dev_err(pcie->dev, "can't set bw[%u]\n", val);
>> +
>> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
>> + speed = 0;
>> +
>> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>> +}
>> +
>> static void apply_bad_link_workaround(struct dw_pcie_rp *pp)
>> {
>> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> @@ -453,18 +476,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
>> struct tegra_pcie_dw *pcie = arg;
>> struct dw_pcie_ep *ep = &pcie->pci.ep;
>> struct dw_pcie *pci = &pcie->pci;
>> - u32 val, speed;
>> + u32 val;
>>
>> if (test_and_clear_bit(0, &pcie->link_status))
>> dw_pcie_ep_linkup(ep);
>>
>> - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
>> - PCI_EXP_LNKSTA_CLS;
>> -
>> - if (speed >= ARRAY_SIZE(pcie_gen_freq))
>> - speed = 0;
>> -
>> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>> + tegra_pcie_icc_set(pcie);
>>
>> if (pcie->of_data->has_ltr_req_fix)
>> return IRQ_HANDLED;
>> @@ -950,9 +967,9 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
>>
>> static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
>> {
>> - u32 val, offset, speed, tmp;
>> struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
>> struct dw_pcie_rp *pp = &pci->pp;
>> + u32 val, offset, tmp;
>> bool retry = true;
>>
>> if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
>> @@ -1023,13 +1040,7 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
>> goto retry_link;
>> }
>>
>> - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
>> - PCI_EXP_LNKSTA_CLS;
>> -
>> - if (speed >= ARRAY_SIZE(pcie_gen_freq))
>> - speed = 0;
>> -
>> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>> + tegra_pcie_icc_set(pcie);
>>
>> tegra_pcie_enable_interrupts(pp);
>>
>> @@ -2233,6 +2244,14 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
>>
>> platform_set_drvdata(pdev, pcie);
>>
>> + pcie->icc_path = devm_of_icc_get(&pdev->dev, "write");
>> + ret = PTR_ERR_OR_ZERO(pcie->icc_path);
>> + if (ret) {
>> + tegra_bpmp_put(pcie->bpmp);
>> + dev_err_probe(&pdev->dev, ret, "failed to get write interconnect\n");
>> + return ret;
>> + }
>> +
>> switch (pcie->of_data->mode) {
>> case DW_PCIE_RC_TYPE:
>> ret = devm_request_irq(dev, pp->irq, tegra_pcie_rp_irq_handler,
>> --
>> 2.17.1
>>

2023-04-18 09:22:30

by Viresh Kumar

[permalink] [raw]
Subject: Re: [Patch v6 6/9] cpufreq: tegra194: add OPP support and set bandwidth

On 11-04-23, 16:29, Sumit Gupta wrote:
> Add support to use OPP table from DT in Tegra194 cpufreq driver.
> Tegra SoC's receive the frequency lookup table (LUT) from BPMP-FW.
> Cross check the OPP's present in DT against the LUT from BPMP-FW
> and enable only those DT OPP's which are present in LUT also.
>
> The OPP table in DT has CPU Frequency to bandwidth mapping where
> the bandwidth value is per MC channel. DRAM bandwidth depends on the
> number of MC channels which can vary as per the boot configuration.
> This per channel bandwidth from OPP table will be later converted by
> MC driver to final bandwidth value by multiplying with number of
> channels before sending the request to BPMP-FW.
>
> If OPP table is not present in DT, then use the LUT from BPMP-FW
> directy as the CPU frequency table and not do the DRAM frequency
> scaling which is same as the current behavior.
>
> Now, as the CPU Frequency table is being controlling through OPP
> table in DT. Keeping fewer entries in the table will create less
> frequency steps and can help to scale fast to high frequencies
> when required.
>
> Signed-off-by: Sumit Gupta <[email protected]>
> ---
> drivers/cpufreq/tegra194-cpufreq.c | 156 ++++++++++++++++++++++++++---
> 1 file changed, 143 insertions(+), 13 deletions(-)

Can this be applied independently of the rest of the series ?

--
viresh

2023-04-18 10:25:31

by Sumit Gupta

[permalink] [raw]
Subject: Re: [Patch v6 6/9] cpufreq: tegra194: add OPP support and set bandwidth



On 18/04/23 14:43, Viresh Kumar wrote:
> External email: Use caution opening links or attachments
>
>
> On 11-04-23, 16:29, Sumit Gupta wrote:
>> Add support to use OPP table from DT in Tegra194 cpufreq driver.
>> Tegra SoC's receive the frequency lookup table (LUT) from BPMP-FW.
>> Cross check the OPP's present in DT against the LUT from BPMP-FW
>> and enable only those DT OPP's which are present in LUT also.
>>
>> The OPP table in DT has CPU Frequency to bandwidth mapping where
>> the bandwidth value is per MC channel. DRAM bandwidth depends on the
>> number of MC channels which can vary as per the boot configuration.
>> This per channel bandwidth from OPP table will be later converted by
>> MC driver to final bandwidth value by multiplying with number of
>> channels before sending the request to BPMP-FW.
>>
>> If OPP table is not present in DT, then use the LUT from BPMP-FW
>> directy as the CPU frequency table and not do the DRAM frequency
>> scaling which is same as the current behavior.
>>
>> Now, as the CPU Frequency table is being controlling through OPP
>> table in DT. Keeping fewer entries in the table will create less
>> frequency steps and can help to scale fast to high frequencies
>> when required.
>>
>> Signed-off-by: Sumit Gupta <[email protected]>
>> ---
>> drivers/cpufreq/tegra194-cpufreq.c | 156 ++++++++++++++++++++++++++---
>> 1 file changed, 143 insertions(+), 13 deletions(-)
>
> Can this be applied independently of the rest of the series ?
>
> --
> viresh

Yes, this can be applied independently.

Thank you,
Sumit Gupta

2023-04-18 11:05:05

by Viresh Kumar

[permalink] [raw]
Subject: Re: [Patch v6 6/9] cpufreq: tegra194: add OPP support and set bandwidth

On 11-04-23, 16:29, Sumit Gupta wrote:
> Add support to use OPP table from DT in Tegra194 cpufreq driver.
> Tegra SoC's receive the frequency lookup table (LUT) from BPMP-FW.
> Cross check the OPP's present in DT against the LUT from BPMP-FW
> and enable only those DT OPP's which are present in LUT also.
>
> The OPP table in DT has CPU Frequency to bandwidth mapping where
> the bandwidth value is per MC channel. DRAM bandwidth depends on the
> number of MC channels which can vary as per the boot configuration.
> This per channel bandwidth from OPP table will be later converted by
> MC driver to final bandwidth value by multiplying with number of
> channels before sending the request to BPMP-FW.
>
> If OPP table is not present in DT, then use the LUT from BPMP-FW
> directy as the CPU frequency table and not do the DRAM frequency
> scaling which is same as the current behavior.
>
> Now, as the CPU Frequency table is being controlling through OPP
> table in DT. Keeping fewer entries in the table will create less
> frequency steps and can help to scale fast to high frequencies
> when required.
>
> Signed-off-by: Sumit Gupta <[email protected]>
> ---
> drivers/cpufreq/tegra194-cpufreq.c | 156 ++++++++++++++++++++++++++---
> 1 file changed, 143 insertions(+), 13 deletions(-)

Applied. Thanks.

--
viresh

2023-04-21 13:16:20

by Lorenzo Pieralisi

[permalink] [raw]
Subject: Re: [Patch v6 8/9] PCI: tegra194: Add interconnect support in Tegra234

On Fri, Apr 14, 2023 at 04:24:02PM +0530, Sumit Gupta wrote:
>
>
> On 13/04/23 20:22, Lorenzo Pieralisi wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > On Tue, Apr 11, 2023 at 04:30:01PM +0530, Sumit Gupta wrote:
> > > Add support to request DRAM bandwidth with Memory Interconnect
> > > in Tegra234 SoC. The DRAM BW required for different modes depends
> > > on speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
> > > Currently, no latency is observed in data transfer with PCI as the
> > > DRAM Freq is always set to max. But that results in high power
> > > consumption. Now for Tegra234, we are enabling the dynamic scaling
> > > of the DRAM Freq based on requests from Clients instead of running
> > > at the max Freq always. This change does that for PCI MC client.
> >
> > I am sorry but this is still unclear to me. The sentence above makes
> > me think that you are *adding* latency to the data transfer trading
> > it with lower power consumption; probably that's a wrong parsing of
> > what you are saying - so please explain what you want to say
> > with "no latency is observed" and whether this patch changes that
> > (which is not allowed because that would count as a regression).
> >
> > Thanks,
> > Lorenzo
> >
>
> Rephrased as below. Please suggest if it is clear now.
>
> Add support to request DRAM bandwidth with Memory Interconnect in
> Tegra234 SoC. The DRAM BW required for different modes depends on
> speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
> Currently, the DRAM freq is always set to max but that results in
> higher power consumption. Memory Interconnect feature adds capability
> for MC clients to request BW and scale the DRAM freq dynamically to
> provide the requested BW.

What does "Memory Interconnect" stand for ?

Is that HW technology or a Linux framework (or both) ?

What does MC stand for ?

Update the commit log below accordingly.

"Add support to request DRAM bandwidth with Memory Interconnect
in Tegra234 SoC.

The DRAM BW required for different modes depends on the link
speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).

Currently, the DRAM frequency is always set to the maximum available
but that results in the highest power consumption.

The Memory Interconnect feature adds the capability for MC clients to
request bandwidth and therefore scale DRAM frequency dynamically
depending on the required link speed so that the DRAM energy consumption
can be optimized".

With that:

Acked-by: Lorenzo Pieralisi <[email protected]>

>
> Thank you,
> Sumit Gupta
>
> > >
> > > Suggested-by: Manikanta Maddireddy <[email protected]>
> > > Signed-off-by: Sumit Gupta <[email protected]>
> > > ---
> > > drivers/pci/controller/dwc/pcie-tegra194.c | 51 +++++++++++++++-------
> > > 1 file changed, 35 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> > > index e6eec85480ca..4fdadc7b045f 100644
> > > --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> > > +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> > > @@ -14,6 +14,7 @@
> > > #include <linux/delay.h>
> > > #include <linux/gpio.h>
> > > #include <linux/gpio/consumer.h>
> > > +#include <linux/interconnect.h>
> > > #include <linux/interrupt.h>
> > > #include <linux/iopoll.h>
> > > #include <linux/kernel.h>
> > > @@ -288,6 +289,7 @@ struct tegra_pcie_dw {
> > > unsigned int pex_rst_irq;
> > > int ep_state;
> > > long link_status;
> > > + struct icc_path *icc_path;
> > > };
> > >
> > > static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
> > > @@ -310,6 +312,27 @@ struct tegra_pcie_soc {
> > > enum dw_pcie_device_mode mode;
> > > };
> > >
> > > +static void tegra_pcie_icc_set(struct tegra_pcie_dw *pcie)
> > > +{
> > > + struct dw_pcie *pci = &pcie->pci;
> > > + u32 val, speed, width;
> > > +
> > > + val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA);
> > > +
> > > + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
> > > + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
> > > +
> > > + val = width * (PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE);
> > > +
> > > + if (icc_set_bw(pcie->icc_path, MBps_to_icc(val), 0))
> > > + dev_err(pcie->dev, "can't set bw[%u]\n", val);
> > > +
> > > + if (speed >= ARRAY_SIZE(pcie_gen_freq))
> > > + speed = 0;
> > > +
> > > + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
> > > +}
> > > +
> > > static void apply_bad_link_workaround(struct dw_pcie_rp *pp)
> > > {
> > > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > @@ -453,18 +476,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
> > > struct tegra_pcie_dw *pcie = arg;
> > > struct dw_pcie_ep *ep = &pcie->pci.ep;
> > > struct dw_pcie *pci = &pcie->pci;
> > > - u32 val, speed;
> > > + u32 val;
> > >
> > > if (test_and_clear_bit(0, &pcie->link_status))
> > > dw_pcie_ep_linkup(ep);
> > >
> > > - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
> > > - PCI_EXP_LNKSTA_CLS;
> > > -
> > > - if (speed >= ARRAY_SIZE(pcie_gen_freq))
> > > - speed = 0;
> > > -
> > > - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
> > > + tegra_pcie_icc_set(pcie);
> > >
> > > if (pcie->of_data->has_ltr_req_fix)
> > > return IRQ_HANDLED;
> > > @@ -950,9 +967,9 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
> > >
> > > static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
> > > {
> > > - u32 val, offset, speed, tmp;
> > > struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
> > > struct dw_pcie_rp *pp = &pci->pp;
> > > + u32 val, offset, tmp;
> > > bool retry = true;
> > >
> > > if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
> > > @@ -1023,13 +1040,7 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
> > > goto retry_link;
> > > }
> > >
> > > - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
> > > - PCI_EXP_LNKSTA_CLS;
> > > -
> > > - if (speed >= ARRAY_SIZE(pcie_gen_freq))
> > > - speed = 0;
> > > -
> > > - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
> > > + tegra_pcie_icc_set(pcie);
> > >
> > > tegra_pcie_enable_interrupts(pp);
> > >
> > > @@ -2233,6 +2244,14 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
> > >
> > > platform_set_drvdata(pdev, pcie);
> > >
> > > + pcie->icc_path = devm_of_icc_get(&pdev->dev, "write");
> > > + ret = PTR_ERR_OR_ZERO(pcie->icc_path);
> > > + if (ret) {
> > > + tegra_bpmp_put(pcie->bpmp);
> > > + dev_err_probe(&pdev->dev, ret, "failed to get write interconnect\n");
> > > + return ret;
> > > + }
> > > +
> > > switch (pcie->of_data->mode) {
> > > case DW_PCIE_RC_TYPE:
> > > ret = devm_request_irq(dev, pp->irq, tegra_pcie_rp_irq_handler,
> > > --
> > > 2.17.1
> > >

2023-04-21 13:16:54

by Lorenzo Pieralisi

[permalink] [raw]
Subject: Re: [Patch v6 7/9] PCI: tegra194: Fix possible array out of bounds access

On Tue, Apr 11, 2023 at 04:30:00PM +0530, Sumit Gupta wrote:
> Add check to fix the possible array out of bounds violation by
> making speed equal to GEN1_CORE_CLK_FREQ when its value is more
> than the size of "pcie_gen_freq" array. This array has size of
> four but possible speed (CLS) values are from "0 to 0xF". So,
> "speed - 1" values are "-1 to 0xE". This change was suggested by
> "Bjorn Helgaas" in the below link.

There is a Suggested-by tag and a Link: tag remove the last
sentence, that's duplicate information.

> Suggested-by: Bjorn Helgaas <[email protected]>
> Signed-off-by: Sumit Gupta <[email protected]>
> Link: https://lore.kernel.org/lkml/[email protected]/
> ---
> drivers/pci/controller/dwc/pcie-tegra194.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)

Acked-by: Lorenzo Pieralisi <[email protected]>

> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 09825b4a075e..e6eec85480ca 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -223,6 +223,7 @@
> #define EP_STATE_ENABLED 1
>
> static const unsigned int pcie_gen_freq[] = {
> + GEN1_CORE_CLK_FREQ, /* PCI_EXP_LNKSTA_CLS == 0; undefined */
> GEN1_CORE_CLK_FREQ,
> GEN2_CORE_CLK_FREQ,
> GEN3_CORE_CLK_FREQ,
> @@ -459,7 +460,11 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
>
> speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
> PCI_EXP_LNKSTA_CLS;
> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
> +
> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
> + speed = 0;
> +
> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>
> if (pcie->of_data->has_ltr_req_fix)
> return IRQ_HANDLED;
> @@ -1020,7 +1025,11 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
>
> speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
> PCI_EXP_LNKSTA_CLS;
> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
> +
> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
> + speed = 0;
> +
> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>
> tegra_pcie_enable_interrupts(pp);
>
> --
> 2.17.1
>

2023-04-24 13:07:38

by Sumit Gupta

[permalink] [raw]
Subject: Re: [Patch v6 7/9] PCI: tegra194: Fix possible array out of bounds access



On 21/04/23 18:42, Lorenzo Pieralisi wrote:
> External email: Use caution opening links or attachments
>
>
> On Tue, Apr 11, 2023 at 04:30:00PM +0530, Sumit Gupta wrote:
>> Add check to fix the possible array out of bounds violation by
>> making speed equal to GEN1_CORE_CLK_FREQ when its value is more
>> than the size of "pcie_gen_freq" array. This array has size of
>> four but possible speed (CLS) values are from "0 to 0xF". So,
>> "speed - 1" values are "-1 to 0xE". This change was suggested by
>> "Bjorn Helgaas" in the below link.
>
> There is a Suggested-by tag and a Link: tag remove the last
> sentence, that's duplicate information.
>
Removed in v7.

Thank you,
Sumit Gupta

>> Suggested-by: Bjorn Helgaas <[email protected]>
>> Signed-off-by: Sumit Gupta <[email protected]>
>> Link: https://lore.kernel.org/lkml/[email protected]/
>> ---
>> drivers/pci/controller/dwc/pcie-tegra194.c | 13 +++++++++++--
>> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> Acked-by: Lorenzo Pieralisi <[email protected]>
>
>> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
>> index 09825b4a075e..e6eec85480ca 100644
>> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
>> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
>> @@ -223,6 +223,7 @@
>> #define EP_STATE_ENABLED 1
>>
>> static const unsigned int pcie_gen_freq[] = {
>> + GEN1_CORE_CLK_FREQ, /* PCI_EXP_LNKSTA_CLS == 0; undefined */
>> GEN1_CORE_CLK_FREQ,
>> GEN2_CORE_CLK_FREQ,
>> GEN3_CORE_CLK_FREQ,
>> @@ -459,7 +460,11 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
>>
>> speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
>> PCI_EXP_LNKSTA_CLS;
>> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
>> +
>> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
>> + speed = 0;
>> +
>> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>>
>> if (pcie->of_data->has_ltr_req_fix)
>> return IRQ_HANDLED;
>> @@ -1020,7 +1025,11 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
>>
>> speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
>> PCI_EXP_LNKSTA_CLS;
>> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed - 1]);
>> +
>> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
>> + speed = 0;
>> +
>> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>>
>> tegra_pcie_enable_interrupts(pp);
>>
>> --
>> 2.17.1
>>

2023-04-24 13:07:43

by Sumit Gupta

[permalink] [raw]
Subject: Re: [Patch v6 8/9] PCI: tegra194: Add interconnect support in Tegra234



On 21/04/23 18:41, Lorenzo Pieralisi wrote:
> External email: Use caution opening links or attachments
>
>
> On Fri, Apr 14, 2023 at 04:24:02PM +0530, Sumit Gupta wrote:
>>
>>
>> On 13/04/23 20:22, Lorenzo Pieralisi wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> On Tue, Apr 11, 2023 at 04:30:01PM +0530, Sumit Gupta wrote:
>>>> Add support to request DRAM bandwidth with Memory Interconnect
>>>> in Tegra234 SoC. The DRAM BW required for different modes depends
>>>> on speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
>>>> Currently, no latency is observed in data transfer with PCI as the
>>>> DRAM Freq is always set to max. But that results in high power
>>>> consumption. Now for Tegra234, we are enabling the dynamic scaling
>>>> of the DRAM Freq based on requests from Clients instead of running
>>>> at the max Freq always. This change does that for PCI MC client.
>>>
>>> I am sorry but this is still unclear to me. The sentence above makes
>>> me think that you are *adding* latency to the data transfer trading
>>> it with lower power consumption; probably that's a wrong parsing of
>>> what you are saying - so please explain what you want to say
>>> with "no latency is observed" and whether this patch changes that
>>> (which is not allowed because that would count as a regression).
>>>
>>> Thanks,
>>> Lorenzo
>>>
>>
>> Rephrased as below. Please suggest if it is clear now.
>>
>> Add support to request DRAM bandwidth with Memory Interconnect in
>> Tegra234 SoC. The DRAM BW required for different modes depends on
>> speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
>> Currently, the DRAM freq is always set to max but that results in
>> higher power consumption. Memory Interconnect feature adds capability
>> for MC clients to request BW and scale the DRAM freq dynamically to
>> provide the requested BW.
>
> What does "Memory Interconnect" stand for ?
>
> Is that HW technology or a Linux framework (or both) ?
>
> What does MC stand for ?
>
> Update the commit log below accordingly.
>
> "Add support to request DRAM bandwidth with Memory Interconnect
> in Tegra234 SoC.
>
> The DRAM BW required for different modes depends on the link
> speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8).
>
> Currently, the DRAM frequency is always set to the maximum available
> but that results in the highest power consumption.
>
> The Memory Interconnect feature adds the capability for MC clients to
> request bandwidth and therefore scale DRAM frequency dynamically
> depending on the required link speed so that the DRAM energy consumption
> can be optimized".
>
> With that:
>
> Acked-by: Lorenzo Pieralisi <[email protected]>
>
Thank you for the inputs.
Have added changes in v7.

>>
>> Thank you,
>> Sumit Gupta
>>
>>>>
>>>> Suggested-by: Manikanta Maddireddy <[email protected]>
>>>> Signed-off-by: Sumit Gupta <[email protected]>
>>>> ---
>>>> drivers/pci/controller/dwc/pcie-tegra194.c | 51 +++++++++++++++-------
>>>> 1 file changed, 35 insertions(+), 16 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
>>>> index e6eec85480ca..4fdadc7b045f 100644
>>>> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
>>>> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
>>>> @@ -14,6 +14,7 @@
>>>> #include <linux/delay.h>
>>>> #include <linux/gpio.h>
>>>> #include <linux/gpio/consumer.h>
>>>> +#include <linux/interconnect.h>
>>>> #include <linux/interrupt.h>
>>>> #include <linux/iopoll.h>
>>>> #include <linux/kernel.h>
>>>> @@ -288,6 +289,7 @@ struct tegra_pcie_dw {
>>>> unsigned int pex_rst_irq;
>>>> int ep_state;
>>>> long link_status;
>>>> + struct icc_path *icc_path;
>>>> };
>>>>
>>>> static inline struct tegra_pcie_dw *to_tegra_pcie(struct dw_pcie *pci)
>>>> @@ -310,6 +312,27 @@ struct tegra_pcie_soc {
>>>> enum dw_pcie_device_mode mode;
>>>> };
>>>>
>>>> +static void tegra_pcie_icc_set(struct tegra_pcie_dw *pcie)
>>>> +{
>>>> + struct dw_pcie *pci = &pcie->pci;
>>>> + u32 val, speed, width;
>>>> +
>>>> + val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA);
>>>> +
>>>> + speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
>>>> + width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
>>>> +
>>>> + val = width * (PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE);
>>>> +
>>>> + if (icc_set_bw(pcie->icc_path, MBps_to_icc(val), 0))
>>>> + dev_err(pcie->dev, "can't set bw[%u]\n", val);
>>>> +
>>>> + if (speed >= ARRAY_SIZE(pcie_gen_freq))
>>>> + speed = 0;
>>>> +
>>>> + clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>>>> +}
>>>> +
>>>> static void apply_bad_link_workaround(struct dw_pcie_rp *pp)
>>>> {
>>>> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>>>> @@ -453,18 +476,12 @@ static irqreturn_t tegra_pcie_ep_irq_thread(int irq, void *arg)
>>>> struct tegra_pcie_dw *pcie = arg;
>>>> struct dw_pcie_ep *ep = &pcie->pci.ep;
>>>> struct dw_pcie *pci = &pcie->pci;
>>>> - u32 val, speed;
>>>> + u32 val;
>>>>
>>>> if (test_and_clear_bit(0, &pcie->link_status))
>>>> dw_pcie_ep_linkup(ep);
>>>>
>>>> - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
>>>> - PCI_EXP_LNKSTA_CLS;
>>>> -
>>>> - if (speed >= ARRAY_SIZE(pcie_gen_freq))
>>>> - speed = 0;
>>>> -
>>>> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>>>> + tegra_pcie_icc_set(pcie);
>>>>
>>>> if (pcie->of_data->has_ltr_req_fix)
>>>> return IRQ_HANDLED;
>>>> @@ -950,9 +967,9 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
>>>>
>>>> static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
>>>> {
>>>> - u32 val, offset, speed, tmp;
>>>> struct tegra_pcie_dw *pcie = to_tegra_pcie(pci);
>>>> struct dw_pcie_rp *pp = &pci->pp;
>>>> + u32 val, offset, tmp;
>>>> bool retry = true;
>>>>
>>>> if (pcie->of_data->mode == DW_PCIE_EP_TYPE) {
>>>> @@ -1023,13 +1040,7 @@ static int tegra_pcie_dw_start_link(struct dw_pcie *pci)
>>>> goto retry_link;
>>>> }
>>>>
>>>> - speed = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA) &
>>>> - PCI_EXP_LNKSTA_CLS;
>>>> -
>>>> - if (speed >= ARRAY_SIZE(pcie_gen_freq))
>>>> - speed = 0;
>>>> -
>>>> - clk_set_rate(pcie->core_clk, pcie_gen_freq[speed]);
>>>> + tegra_pcie_icc_set(pcie);
>>>>
>>>> tegra_pcie_enable_interrupts(pp);
>>>>
>>>> @@ -2233,6 +2244,14 @@ static int tegra_pcie_dw_probe(struct platform_device *pdev)
>>>>
>>>> platform_set_drvdata(pdev, pcie);
>>>>
>>>> + pcie->icc_path = devm_of_icc_get(&pdev->dev, "write");
>>>> + ret = PTR_ERR_OR_ZERO(pcie->icc_path);
>>>> + if (ret) {
>>>> + tegra_bpmp_put(pcie->bpmp);
>>>> + dev_err_probe(&pdev->dev, ret, "failed to get write interconnect\n");
>>>> + return ret;
>>>> + }
>>>> +
>>>> switch (pcie->of_data->mode) {
>>>> case DW_PCIE_RC_TYPE:
>>>> ret = devm_request_irq(dev, pp->irq, tegra_pcie_rp_irq_handler,
>>>> --
>>>> 2.17.1
>>>>