Hello
I have tested your patch against a 6.3.4:
sensors
nct6799-isa-0290
Adapter: ISA adapter
in0: 832.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 1.04 V (min = +0.00 V, max = +0.00 V) ALARM
in6: 760.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.67 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 560.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 552.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.04 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 480.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 408.00 mV (min = +0.00 V, max = +0.00 V) ALARM
fan1: 808 RPM (min = 0 RPM)
fan2: 589 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 809 RPM (min = 0 RPM)
fan5: 510 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
SYSTIN: +33.0?C (high = +80.0?C, hyst = +75.0?C) sensor = thermistor
CPUTIN: +38.0?C (high = +80.0?C, hyst = +75.0?C) sensor = thermistor
AUXTIN0: +39.5?C sensor = thermistor
AUXTIN1: +19.0?C sensor = thermistor
AUXTIN2: +20.0?C sensor = thermistor
AUXTIN3: +73.0?C sensor = thermistor
PECI Agent 0 Calibration: +41.5?C
PCH_CHIP_CPU_MAX_TEMP: +0.0?C
PCH_CHIP_TEMP: +0.0?C
PCH_CPU_TEMP: +0.0?C
TSI0_TEMP: +52.4?C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
Part of dmesg:
[16453.196174] nct6775: Found NCT6799D or compatible chip at 0x2e:0x290
So you could add:
Tested-by: Corentin Labbe <[email protected]>
Thanks