Adds binding for digital Honeywell TruStability HSC and SSC series
pressure and temperature sensors.
Communication is one way. The sensor only requires 4 bytes worth of
clock signals on both i2c and spi in order to push the data out.
The i2c address is hardcoded and depends on the part number.
There is no additional GPIO control.
Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC]
Datasheet:
https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC]
Signed-off-by: Petre Rodan <[email protected]>
---
V2: - fix yaml struct
- cleanup based on Krzysztof's review
V3: - rename range_str -> honeywell,pressure-triplet to define the string
containing the pressure range, measurement unit and type
- honeywell,pmax-pascal becomes uint32 (Krzysztof)
- pmin-pascal still needs type change to int32
for kpascal in the schema.
be so kind and add 'pascal' as well since there are sensors with
a full scale span of mere 320 pascals with 14bits of precision.
---
.../iio/pressure/honeywell,hsc030pa.yaml | 133 ++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
new file mode 100644
index 000000000000..47f7a8202847
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell TruStability HSC and SSC pressure sensor series
+
+description: |
+ support for Honeywell TruStability HSC and SSC digital pressure sensor
+ series.
+
+ These sensors have either an I2C, an SPI or an analog interface. Only the
+ digital versions are supported by this driver.
+
+ There are 118 models with different pressure ranges available in each family.
+ The vendor calls them "HSC series" and "SSC series". All of them have an
+ identical programming model but differ in pressure range, unit and transfer
+ function.
+
+ To support different models one needs to specify the pressure range as well
+ as the transfer function. Pressure range can either be provided via
+ pressure-triplet (directly extracted from the part number) or in case it's
+ a custom chip via numerical range limits converted to pascals.
+
+ The transfer function defines the ranges of raw conversion values delivered
+ by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
+ maximum pressure that can be measured.
+
+ Please note that in case of an SPI-based sensor, the clock signal should not
+ exceed 800kHz and the MOSI signal is not required.
+
+ Specifications about the devices can be found at:
+ https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+ https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
+
+maintainers:
+ - Petre Rodan <[email protected]>
+
+properties:
+ compatible:
+ const: honeywell,hsc030pa
+
+ reg:
+ maxItems: 1
+
+ honeywell,transfer-function:
+ description: |
+ Transfer function which defines the range of valid values delivered by
+ the sensor.
+ 0 - A, 10% to 90% of 2^14
+ 1 - B, 5% to 95% of 2^14
+ 2 - C, 5% to 85% of 2^14
+ 3 - F, 4% to 94% of 2^14
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ honeywell,pressure-triplet:
+ description: |
+ Case-sensitive five character string that defines pressure range, unit
+ and type as part of the device nomenclature. In the unlikely case of a
+ custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+ enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
+ 006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
+ 400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
+ 010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
+ 600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
+ 250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
+ 1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
+ 100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
+ 2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
+ 160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
+ 150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
+ 001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
+ 010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
+ 150PG, NA]
+ $ref: /schemas/types.yaml#/definitions/string
+
+ honeywell,pmin-pascal:
+ description: |
+ Minimum pressure value the sensor can measure in pascal.
+ To be specified only if honeywell,pressure-triplet is set to "NA".
+ $ref: /schemas/types.yaml#/definitions/int32
+
+ honeywell,pmax-pascal:
+ description: |
+ Maximum pressure value the sensor can measure in pascal.
+ To be specified only if honeywell,pressure-triplet is set to "NA".
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ vdd-supply:
+ description:
+ Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)
+
+ spi-max-frequency:
+ maximum: 800000
+
+required:
+ - compatible
+ - reg
+ - honeywell,transfer-function
+ - honeywell,pressure-triplet
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@28 {
+ compatible = "honeywell,hsc030pa";
+ reg = <0x28>;
+ honeywell,transfer-function = <0>;
+ honeywell,pressure-triplet = "030PA";
+ };
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pressure@0 {
+ compatible = "honeywell,hsc030pa";
+ reg = <0>;
+ spi-max-frequency = <800000>;
+ honeywell,transfer-function = <0>;
+ honeywell,pressure-triplet = "NA";
+ honeywell,pmin-pascal = <0>;
+ honeywell,pmax-pascal = <200000>;
+ };
+ };
+...
--
2.41.0
On 26/11/2023 11:14, Petre Rodan wrote:
> Adds binding for digital Honeywell TruStability HSC and SSC series
> pressure and temperature sensors.
> Communication is one way. The sensor only requires 4 bytes worth of
> clock signals on both i2c and spi in order to push the data out.
> The i2c address is hardcoded and depends on the part number.
> There is no additional GPIO control.
> +
> + honeywell,transfer-function:
> + description: |
> + Transfer function which defines the range of valid values delivered by
> + the sensor.
> + 0 - A, 10% to 90% of 2^14
> + 1 - B, 5% to 95% of 2^14
> + 2 - C, 5% to 85% of 2^14
> + 3 - F, 4% to 94% of 2^14
You need enum here as well
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + honeywell,pmin-pascal:
> + description: |
> + Minimum pressure value the sensor can measure in pascal.
> + To be specified only if honeywell,pressure-triplet is set to "NA".
> + $ref: /schemas/types.yaml#/definitions/int32
> +
> + honeywell,pmax-pascal:
> + description: |
> + Maximum pressure value the sensor can measure in pascal.
> + To be specified only if honeywell,pressure-triplet is set to "NA".
> + $ref: /schemas/types.yaml#/definitions/uint32
Sent a pull request:
https://github.com/devicetree-org/dt-schema/pull/118
Once it get merged, both $ref could be dropped.
Best regards,
Krzysztof
On Mon, Nov 27, 2023 at 09:06:54AM +0100, Krzysztof Kozlowski wrote:
> On 26/11/2023 11:14, Petre Rodan wrote:
> > + honeywell,pmin-pascal:
> > + description: |
> > + Minimum pressure value the sensor can measure in pascal.
> > + To be specified only if honeywell,pressure-triplet is set to "NA".
> > + $ref: /schemas/types.yaml#/definitions/int32
> > +
> > + honeywell,pmax-pascal:
> > + description: |
> > + Maximum pressure value the sensor can measure in pascal.
> > + To be specified only if honeywell,pressure-triplet is set to "NA".
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Sent a pull request:
> https://github.com/devicetree-org/dt-schema/pull/118
> Once it get merged, both $ref could be dropped.
thank your for the PR.
in patternProperties, please also add the int32 type for pascal.
your patch seems to cover kilopascal only.
cheers,
peter
>
> Best regards,
> Krzysztof
>
--
petre rodan
On 27/11/2023 13:49, Petre Rodan wrote:
> On Mon, Nov 27, 2023 at 09:06:54AM +0100, Krzysztof Kozlowski wrote:
>> On 26/11/2023 11:14, Petre Rodan wrote:
>>> + honeywell,pmin-pascal:
>>> + description: |
>>> + Minimum pressure value the sensor can measure in pascal.
>>> + To be specified only if honeywell,pressure-triplet is set to "NA".
>>> + $ref: /schemas/types.yaml#/definitions/int32
>>> +
>>> + honeywell,pmax-pascal:
>>> + description: |
>>> + Maximum pressure value the sensor can measure in pascal.
>>> + To be specified only if honeywell,pressure-triplet is set to "NA".
>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>
>> Sent a pull request:
>> https://github.com/devicetree-org/dt-schema/pull/118
>> Once it get merged, both $ref could be dropped.
>
> thank your for the PR.
>
> in patternProperties, please also add the int32 type for pascal.
> your patch seems to cover kilopascal only.
Did you just speak to yourself? Otherwise I don't get it.
Best regards,
Krzysztof